Search Results

Search found 506 results on 21 pages for 'mnt'.

Page 17/21 | < Previous Page | 13 14 15 16 17 18 19 20 21  | Next Page >

• After tarball restore my PC (tar xvfpz backup.tgz -C /), my sound card and network are not working. How to detect?

  - by axton hunger

  1 . I have a old laptop I installed Ubuntu 12.04 on. (It was ACER) 2 . I booted into single user mode and backed it up via cd / sudo -i tar cvpzf backup.tgz --exclude=/proc --exclude=/dev --exclude=/lost+found --exclude=/backup.tgz --exclude=/mnt --exclude=/sys / 3 . I installed a fresh copy of Ubuntu 1204 on my new laptop (It is Dell) 4 . I boot into single user mode 5 . I backup the existing /boot directory 6 . I untar my backup to restore on to the Dell sudo tar xvfpz backup.tgz -C / 7 . I restore the previous /boot directory again 8 . I boot it up, and my profile and settings are loaded ok but, Ubuntu shows that there is no Sound Card.. I cannot use unity to drag and change volume. I noticed that the network card also doesnt work. ** How do you make ubuntu recognize changed hardware, if the hardware is already configured for a different laptop? Does anyone know?**

  Read the article

• android alarm not able to launch alarm activity

  - by user965830

  I am new to android programming and am trying to make this simple alarm app. I have my code written and it is compiled with no errors. The app runs in the emulator, that is the main activity asks the date and time, but when i click on the confirm button, it displays the message - "Unfortunately, Timer1 has stopped working." The code for my main activity is as follows: public void onClick(View v) { EditText date = (EditText) findViewById(R.id.editDate); EditText month = (EditText) findViewById(R.id.editMonth); EditText hour = (EditText) findViewById(R.id.editHour); EditText min = (EditText) findViewById(R.id.editMin); int dt = Integer.parseInt(date.getText().toString()); int mon = Integer.parseInt(month.getText().toString()); int hr = Integer.parseInt(hour.getText().toString()); int mnt = Integer.parseInt(min.getText().toString()); Intent myIntent = new Intent(MainActivity.this, AlarmActivity.class); pendingIntent = PendingIntent.getService(MainActivity.this, 0, myIntent, 0); AlarmManager alarmManager = (AlarmManager) getSystemService(ALARM_SERVICE); Calendar calendar = Calendar.getInstance(); calendar.set(Calendar.DATE, dt); calendar.set(Calendar.MONTH, mon); calendar.set(Calendar.HOUR, hr); calendar.set(Calendar.MINUTE, mnt); alarmManager.set(AlarmManager.RTC_WAKEUP, calendar.getTimeInMillis(), pendingIntent); } I do not understand what all the errors in logcat mean, so i am posting them: 06-25 16:03:32.175: I/Process(566): Sending signal. PID: 566 SIG: 9 06-25 16:03:53.775: I/dalvikvm(612): threadid=3: reacting to signal 3 06-25 16:03:54.046: I/dalvikvm(612): Wrote stack traces to '/data/anr/traces.txt' 06-25 16:03:54.255: I/dalvikvm(612): threadid=3: reacting to signal 3 06-25 16:03:54.305: I/dalvikvm(612): Wrote stack traces to '/data/anr/traces.txt' 06-25 16:03:54.735: I/dalvikvm(612): threadid=3: reacting to signal 3 06-25 16:03:54.785: I/dalvikvm(612): Wrote stack traces to '/data/anr/traces.txt' 06-25 16:03:54.925: D/gralloc_goldfish(612): Emulator without GPU emulation detected. 06-25 16:05:09.605: D/AndroidRuntime(612): Shutting down VM 06-25 16:05:09.605: W/dalvikvm(612): threadid=1: thread exiting with uncaught exception (group=0x409c01f8) 06-25 16:05:09.685: E/AndroidRuntime(612): FATAL EXCEPTION: main 06-25 16:05:09.685: E/AndroidRuntime(612): java.lang.NumberFormatException: Invalid int: "android.widget.EditText@41030b40" 06-25 16:05:09.685: E/AndroidRuntime(612): at java.lang.Integer.invalidInt(Integer.java:138) 06-25 16:05:09.685: E/AndroidRuntime(612): at java.lang.Integer.parse(Integer.java:375) 06-25 16:05:09.685: E/AndroidRuntime(612): at java.lang.Integer.parseInt(Integer.java:366) 06-25 16:05:09.685: E/AndroidRuntime(612): at java.lang.Integer.parseInt(Integer.java:332) 06-25 16:05:09.685: E/AndroidRuntime(612): at com.kapymay.tversion1.MainActivity$1.onClick(MainActivity.java:34) 06-25 16:05:09.685: E/AndroidRuntime(612): at android.view.View.performClick(View.java:3511) 06-25 16:05:09.685: E/AndroidRuntime(612): at android.view.View$PerformClick.run(View.java:14105) 06-25 16:05:09.685: E/AndroidRuntime(612): at android.os.Handler.handleCallback(Handler.java:605) 06-25 16:05:09.685: E/AndroidRuntime(612): at android.os.Handler.dispatchMessage(Handler.java:92) 06-25 16:05:09.685: E/AndroidRuntime(612): at android.os.Looper.loop(Looper.java:137) 06-25 16:05:09.685: E/AndroidRuntime(612): at android.app.ActivityThread.main(ActivityThread.java:4424) 06-25 16:05:09.685: E/AndroidRuntime(612): at java.lang.reflect.Method.invokeNative(Native Method) 06-25 16:05:09.685: E/AndroidRuntime(612): at java.lang.reflect.Method.invoke(Method.java:511) 06-25 16:05:09.685: E/AndroidRuntime(612): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:784) 06-25 16:05:09.685: E/AndroidRuntime(612): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:551) 06-25 16:05:09.685: E/AndroidRuntime(612): at dalvik.system.NativeStart.main(Native Method) 06-25 16:05:10.445: I/dalvikvm(612): threadid=3: reacting to signal 3 06-25 16:05:10.575: I/dalvikvm(612): Wrote stack traces to '/data/anr/traces.txt'

  Read the article

• Android app crashes on emulator - logCat shows no errors

  - by David Miler

  I have just added the SherlockActionBar library to my android project. After some small changes (FragmentActivity - SherlockFragmentActivity, getActionBar() - getSupportActionBar(), imports) it all compiled nicely. After I run the app, however, the debugger stops, as though it had encountered an exception. However, there are no errors shown in the LogCat output. I just can't wrap my head around what's going on. Here is the logCat output after I terminate the app. 10-02 14:11:19.227: I/SystemUpdateService(174): UpdateTask at time 1349187079227 10-02 14:11:19.237: I/ActivityThread(328): Pub com.android.email.attachmentprovider: com.android.email.provider.AttachmentProvider 10-02 14:11:19.687: I/dalvikvm(81): Jit: resizing JitTable from 512 to 1024 10-02 14:11:19.809: D/MediaScannerService(150): start scanning volume internal: [/system/media] 10-02 14:11:20.047: V/AlarmClock(239): AlarmInitReceiver finished 10-02 14:11:20.087: I/ActivityManager(81): Start proc com.android.quicksearchbox for broadcast com.android.quicksearchbox/.SearchWidgetProvider: pid=346 uid=10012 gids={3003} 10-02 14:11:20.127: D/ExchangeService(320): !!! EAS ExchangeService, onStartCommand, startingUp = false, running = false 10-02 14:11:20.427: I/ActivityThread(346): Pub com.android.quicksearchbox.google: com.android.quicksearchbox.google.GoogleSuggestionProvider 10-02 14:11:20.497: I/ActivityThread(346): Pub com.android.quicksearchbox.shortcuts: com.android.quicksearchbox.ShortcutsProvider 10-02 14:11:20.657: I/ActivityManager(81): Start proc com.android.music for broadcast com.android.music/.MediaAppWidgetProvider: pid=358 uid=10028 gids={3003, 1015} 10-02 14:11:20.927: D/ExchangeService(320): !!! EAS ExchangeService, onCreate 10-02 14:11:20.967: D/dalvikvm(260): GC_CONCURRENT freed 213K, 6% free 6409K/6791K, paused 5ms+101ms 10-02 14:11:21.077: D/ExchangeService(320): !!! EAS ExchangeService, onStartCommand, startingUp = true, running = false 10-02 14:11:21.567: D/GTalkService(174): [ReonnectMgr] ### report Inet condition: status=false, networkType=0 10-02 14:11:21.587: D/ConnectivityService(81): reportNetworkCondition(0, 0) 10-02 14:11:21.597: D/ConnectivityService(81): Inet connectivity change, net=0, condition=0,mActiveDefaultNetwork=0 10-02 14:11:21.597: D/ConnectivityService(81): starting a change hold 10-02 14:11:21.697: D/GTalkService(174): [RawStanzaProvidersMgr] ##### searchProvidersFromIntent 10-02 14:11:21.697: D/GTalkService(174): [RawStanzaProvidersMgr] no intent receivers found 10-02 14:11:21.847: I/SystemUpdateService(174): cancelUpdate (empty URL) 10-02 14:11:21.847: E/TelephonyManager(174): Hidden constructor called more than once per process! 10-02 14:11:21.867: D/dalvikvm(174): GC_CONCURRENT freed 337K, 7% free 6561K/7047K, paused 5ms+4ms 10-02 14:11:21.917: D/GTalkService(174): [ReonnectMgr] ### report Inet condition: status=false, networkType=0 10-02 14:11:21.917: D/ConnectivityService(81): reportNetworkCondition(0, 0) 10-02 14:11:21.917: D/ConnectivityService(81): Inet connectivity change, net=0, condition=0,mActiveDefaultNetwork=0 10-02 14:11:21.917: D/ConnectivityService(81): currently in hold - not setting new end evt 10-02 14:11:21.990: E/TelephonyManager(174): Original: com.google.android.location, new: com.google.android.gsf 10-02 14:11:22.027: I/SystemUpdateService(174): removeAllDownloads (cancelUpdate) 10-02 14:11:22.127: D/dalvikvm(328): GC_CONCURRENT freed 205K, 6% free 6506K/6855K, paused 660ms+3ms 10-02 14:11:22.197: D/Eas Debug(320): Logging: 10-02 14:11:22.319: D/dalvikvm(81): GREF has increased to 401 10-02 14:11:22.947: D/ExchangeService(320): !!! EAS ExchangeService, onStartCommand, startingUp = true, running = false 10-02 14:11:23.130: D/Eas Debug(320): Logging: 10-02 14:11:23.307: I//system/bin/fsck_msdos(29): Attempting to allocate 2044 KB for FAT 10-02 14:11:23.560: I/ActivityManager(81): Starting: Intent { flg=0x10000000 cmp=com.google.android.gsf/.update.SystemUpdateInstallDialog } from pid 174 10-02 14:11:23.587: I/ActivityManager(81): Starting: Intent { flg=0x10000000 cmp=com.google.android.gsf/.update.SystemUpdateDownloadDialog } from pid 174 10-02 14:11:24.087: W/ActivityManager(81): Activity pause timeout for ActivityRecord{407c7320 com.android.launcher/com.android.launcher2.Launcher} 10-02 14:11:24.237: E/TelephonyManager(174): Hidden constructor called more than once per process! 10-02 14:11:24.237: E/TelephonyManager(174): Original: com.google.android.location, new: com.google.android.gsf 10-02 14:11:24.507: D/dalvikvm(174): GC_EXPLICIT freed 231K, 7% free 6596K/7047K, paused 4ms+6ms 10-02 14:11:24.607: D/ConnectivityService(81): Inet hold end, net=0, condition =0, published condition =0 10-02 14:11:24.607: D/ConnectivityService(81): no change in condition - aborting 10-02 14:11:24.707: D/dalvikvm(174): GC_EXPLICIT freed 17K, 7% free 6579K/7047K, paused 4ms+4ms 10-02 14:11:24.947: I//system/bin/fsck_msdos(29): ** Phase 2 - Check Cluster Chains 10-02 14:11:25.117: I//system/bin/fsck_msdos(29): ** Phase 3 - Checking Directories 10-02 14:11:25.128: I//system/bin/fsck_msdos(29): ** Phase 4 - Checking for Lost Files 10-02 14:11:25.167: I//system/bin/fsck_msdos(29): 12 files, 1044448 free (522224 clusters) 10-02 14:11:25.227: I/Vold(29): Filesystem check completed OK 10-02 14:11:25.227: I/Vold(29): Device /dev/block/vold/179:0, target /mnt/sdcard mounted @ /mnt/secure/staging 10-02 14:11:25.237: D/Vold(29): Volume sdcard state changing 3 (Checking) -> 4 (Mounted) 10-02 14:11:25.257: I/PackageManager(81): Updating external media status from unmounted to mounted 10-02 14:11:25.457: D/dalvikvm(303): GC_EXPLICIT freed 35K, 6% free 6242K/6595K, paused 3ms+312ms 10-02 14:11:25.987: D/ExchangeService(320): !!! EAS ExchangeService, onStartCommand, startingUp = true, running = false 10-02 14:11:26.157: D/MediaScanner(150): prescan time: 2905ms 10-02 14:11:26.167: D/MediaScanner(150): scan time: 148ms 10-02 14:11:26.167: D/MediaScanner(150): postscan time: 2ms 10-02 14:11:26.167: D/MediaScanner(150): total time: 3055ms 10-02 14:11:26.197: D/MediaScannerService(150): done scanning volume internal 10-02 14:11:26.237: D/MediaScannerService(150): start scanning volume external: [/mnt/sdcard] 10-02 14:11:26.497: D/dalvikvm(143): GC_EXPLICIT freed 234K, 8% free 7735K/8327K, paused 3ms+5ms 10-02 14:11:27.180: D/dalvikvm(143): GC_CONCURRENT freed 150K, 4% free 8004K/8327K, paused 7ms+3ms 10-02 14:11:27.397: D/dalvikvm(143): GC_FOR_ALLOC freed 96K, 6% free 8310K/8775K, paused 76ms 10-02 14:11:27.580: D/dalvikvm(143): GC_FOR_ALLOC freed 515K, 11% free 8135K/9095K, paused 79ms 10-02 14:11:27.829: D/dalvikvm(143): GC_CONCURRENT freed 3K, 5% free 8694K/9095K, paused 7ms+6ms 10-02 14:11:28.137: V/TLINE(143): new: android.text.TextLine@4065b280 10-02 14:11:28.527: D/dalvikvm(143): GC_CONCURRENT freed 729K, 10% free 8764K/9671K, paused 5ms+13ms 10-02 14:11:28.677: D/dalvikvm(143): GC_FOR_ALLOC freed 152K, 11% free 8683K/9671K, paused 99ms 10-02 14:11:28.717: I/dalvikvm-heap(143): Grow heap (frag case) to 11.434MB for 2975968-byte allocation 10-02 14:11:28.807: D/dalvikvm(143): GC_FOR_ALLOC freed 0K, 9% free 11589K/12615K, paused 84ms 10-02 14:11:29.159: D/dalvikvm(143): GC_CONCURRENT freed 197K, 7% free 12195K/12999K, paused 8ms+6ms 10-02 14:11:29.647: D/dalvikvm(143): GC_EXPLICIT freed 351K, 6% free 12790K/13511K, paused 8ms+17ms 10-02 14:11:29.717: I/SurfaceFlinger(32): Boot is finished (70768 ms) 10-02 14:11:29.877: I/ARMAssembler(32): generated scanline__00000177:03010104_00000002_00000000 [ 44 ipp] (66 ins) at [0x407c7290:0x407c7398] in 990662 ns 10-02 14:11:29.907: I/ARMAssembler(32): generated scanline__00000177:03515104_00000001_00000000 [ 73 ipp] (95 ins) at [0x407c73a0:0x407c751c] in 989381 ns 10-02 14:11:30.287: D/dalvikvm(174): GC_EXPLICIT freed 25K, 8% free 6554K/7047K, paused 4ms+32ms 10-02 14:11:30.380: D/dalvikvm(143): GC_EXPLICIT freed 349K, 6% free 13124K/13895K, paused 5ms+25ms 10-02 14:11:30.957: D/dalvikvm(143): GC_FOR_ALLOC freed 1069K, 10% free 13860K/15239K, paused 81ms 10-02 14:11:32.177: D/dalvikvm(150): GC_CONCURRENT freed 183K, 6% free 6438K/6791K, paused 5ms+4ms 10-02 14:11:32.187: W/ActivityManager(81): No content provider found for: 10-02 14:11:32.607: V/MediaScanner(150): pruneDeadThumbnailFiles... android.database.sqlite.SQLiteCursor@406724a8 10-02 14:11:32.617: V/MediaScanner(150): /pruneDeadThumbnailFiles... android.database.sqlite.SQLiteCursor@406724a8 10-02 14:11:32.640: W/ActivityManager(81): No content provider found for: 10-02 14:11:32.640: D/VoldCmdListener(29): asec list 10-02 14:11:32.647: I/PackageManager(81): No secure containers on sdcard 10-02 14:11:32.667: D/MediaScanner(150): prescan time: 107ms 10-02 14:11:32.667: D/MediaScanner(150): scan time: 89ms 10-02 14:11:32.667: D/MediaScanner(150): postscan time: 61ms 10-02 14:11:32.667: D/MediaScanner(150): total time: 257ms 10-02 14:11:32.697: W/PackageManager(81): Unknown permission android.permission.ADD_SYSTEM_SERVICE in package com.android.phone 10-02 14:11:32.707: W/PackageManager(81): Unknown permission com.android.smspush.WAPPUSH_MANAGER_BIND in package com.android.phone 10-02 14:11:32.737: W/PackageManager(81): Not granting permission android.permission.SEND_DOWNLOAD_COMPLETED_INTENTS to package com.android.browser (protectionLevel=2 flags=0x9be45) 10-02 14:11:32.737: W/PackageManager(81): Not granting permission android.permission.BIND_APPWIDGET to package com.android.widgetpreview (protectionLevel=3 flags=0x28be44) 10-02 14:11:32.767: W/PackageManager(81): Unknown permission android.permission.READ_OWNER_DATA in package com.android.exchange 10-02 14:11:32.778: W/PackageManager(81): Unknown permission android.permission.READ_OWNER_DATA in package com.android.email 10-02 14:11:32.788: W/PackageManager(81): Unknown permission com.android.providers.im.permission.READ_ONLY in package com.google.android.apps.maps 10-02 14:11:32.797: W/PackageManager(81): Not granting permission android.permission.DEVICE_POWER to package com.android.deskclock (protectionLevel=2 flags=0x8be45) 10-02 14:11:33.137: D/MediaScannerService(150): done scanning volume external 10-02 14:11:33.197: D/PackageParser(81): Scanning package: /data/app/vmdl257911298.tmp 10-02 14:11:33.837: I/InputReader(81): Device reconfigured: id=0, name='qwerty2', surface size is now 1024x800 10-02 14:11:34.097: D/dalvikvm(81): GC_CONCURRENT freed 12185K, 47% free 13966K/26311K, paused 8ms+23ms 10-02 14:11:36.798: I/TabletStatusBar(124): DISABLE_CLOCK: no 10-02 14:11:36.798: I/TabletStatusBar(124): DISABLE_NAVIGATION: no 10-02 14:11:37.348: I/ARMAssembler(32): generated scanline__00000177:03515104_00001001_00000000 [ 91 ipp] (114 ins) at [0x407c7520:0x407c76e8] in 919320 ns 10-02 14:11:37.598: I/TabletStatusBar(124): DISABLE_BACK: no 10-02 14:11:37.710: I/ActivityManager(81): Displayed com.android.launcher/com.android.launcher2.Launcher: +46s212ms 10-02 14:11:38.817: D/dalvikvm(143): GC_CONCURRENT freed 969K, 8% free 14867K/16007K, paused 4ms+10ms 10-02 14:11:39.437: I/dalvikvm(81): Jit: resizing JitTable from 1024 to 2048 10-02 14:11:40.267: D/dalvikvm(143): GC_FOR_ALLOC freed 2357K, 16% free 14395K/17031K, paused 80ms 10-02 14:11:40.717: D/dalvikvm(143): GC_EXPLICIT freed 742K, 16% free 14358K/17031K, paused 8ms+4ms 10-02 14:11:41.617: D/dalvikvm(81): GC_CONCURRENT freed 1955K, 48% free 13869K/26311K, paused 9ms+10ms 10-02 14:11:42.559: D/dalvikvm(81): GC_CONCURRENT freed 1830K, 48% free 13881K/26311K, paused 9ms+9ms 10-02 14:11:42.758: I/PackageManager(81): Removing non-system package:cz.trilimi.sfaui 10-02 14:11:42.758: I/ActivityManager(81): Force stopping package cz.trilimi.sfaui uid=10036 10-02 14:11:42.967: D/PackageManager(81): Scanning package cz.trilimi.sfaui 10-02 14:11:42.967: I/PackageManager(81): Package cz.trilimi.sfaui codePath changed from /data/app/cz.trilimi.sfaui-1.apk to /data/app/cz.trilimi.sfaui-2.apk; Retaining data and using new 10-02 14:11:42.967: I/PackageManager(81): Unpacking native libraries for /data/app/cz.trilimi.sfaui-2.apk 10-02 14:11:43.097: D/installd(35): DexInv: --- BEGIN '/data/app/cz.trilimi.sfaui-2.apk' --- 10-02 14:11:45.317: D/dalvikvm(391): DexOpt: load 434ms, verify+opt 1260ms 10-02 14:11:45.407: D/installd(35): DexInv: --- END '/data/app/cz.trilimi.sfaui-2.apk' (success) --- 10-02 14:11:45.407: W/PackageManager(81): Code path for pkg : cz.trilimi.sfaui changing from /data/app/cz.trilimi.sfaui-1.apk to /data/app/cz.trilimi.sfaui-2.apk 10-02 14:11:45.407: W/PackageManager(81): Resource path for pkg : cz.trilimi.sfaui changing from /data/app/cz.trilimi.sfaui-1.apk to /data/app/cz.trilimi.sfaui-2.apk 10-02 14:11:45.407: D/PackageManager(81): Activities: cz.trilimi.sfaui.ItemListActivity cz.trilimi.sfaui.ItemDetailActivity 10-02 14:11:45.427: I/ActivityManager(81): Force stopping package cz.trilimi.sfaui uid=10036 10-02 14:11:45.657: I/installd(35): move /data/dalvik-cache/data@[email protected]@classes.dex -> /data/dalvik-cache/data@[email protected]@classes.dex 10-02 14:11:45.657: D/PackageManager(81): New package installed in /data/app/cz.trilimi.sfaui-2.apk 10-02 14:11:45.997: I/ActivityManager(81): Force stopping package cz.trilimi.sfaui uid=10036 10-02 14:11:46.147: D/dalvikvm(143): GC_EXPLICIT freed 3K, 16% free 14356K/17031K, paused 10ms+9ms 10-02 14:11:46.237: D/PackageManager(81): generateServicesMap(android.accounts.AccountAuthenticator): 3 services unchanged 10-02 14:11:46.277: D/PackageManager(81): generateServicesMap(android.content.SyncAdapter): 5 services unchanged 10-02 14:11:46.337: D/PackageManager(81): generateServicesMap(android.accounts.AccountAuthenticator): 3 services unchanged 10-02 14:11:46.347: D/PackageManager(81): generateServicesMap(android.content.SyncAdapter): 5 services unchanged 10-02 14:11:46.437: D/dalvikvm(208): GC_EXPLICIT freed 258K, 7% free 6488K/6919K, paused 3ms+5ms 10-02 14:11:46.477: W/RecognitionManagerService(81): no available voice recognition services found 10-02 14:11:46.897: I/ActivityManager(81): Start proc com.svox.pico for broadcast com.svox.pico/.VoiceDataInstallerReceiver: pid=398 uid=10006 gids={} 10-02 14:11:47.087: I/ActivityThread(398): Pub com.svox.pico.providers.SettingsProvider: com.svox.pico.providers.SettingsProvider 10-02 14:11:47.138: D/GTalkService(174): [GTalkService.1] handlePackageInstalled: re-initialize providers 10-02 14:11:47.147: D/GTalkService(174): [RawStanzaProvidersMgr] ##### searchProvidersFromIntent 10-02 14:11:47.147: D/GTalkService(174): [RawStanzaProvidersMgr] no intent receivers found 10-02 14:11:47.718: I/AccountTypeManager(208): Loaded meta-data for 1 account types, 0 accounts in 186ms 10-02 14:11:48.377: D/dalvikvm(143): GC_CONCURRENT freed 1865K, 15% free 14513K/17031K, paused 7ms+4ms 10-02 14:11:48.917: D/dalvikvm(208): GC_CONCURRENT freed 219K, 6% free 6788K/7175K, paused 7ms+73ms 10-02 14:11:49.207: D/dalvikvm(143): GC_FOR_ALLOC freed 4558K, 31% free 11866K/17031K, paused 89ms 10-02 14:11:49.587: D/dalvikvm(143): GC_CONCURRENT freed 713K, 24% free 13010K/17031K, paused 5ms+4ms 10-02 14:11:49.967: D/dalvikvm(143): GC_CONCURRENT freed 1046K, 19% free 13922K/17031K, paused 5ms+4ms 10-02 14:11:50.437: D/dalvikvm(81): GC_EXPLICIT freed 898K, 47% free 13955K/26311K, paused 6ms+39ms 10-02 14:11:50.467: I/installd(35): unlink /data/dalvik-cache/data@[email protected]@classes.dex 10-02 14:11:50.477: D/AndroidRuntime(227): Shutting down VM 10-02 14:11:50.507: D/dalvikvm(227): GC_CONCURRENT freed 97K, 84% free 331K/2048K, paused 1ms+2ms 10-02 14:11:50.507: I/AndroidRuntime(227): NOTE: attach of thread 'Binder Thread #3' failed 10-02 14:11:50.517: D/jdwp(227): adbd disconnected 10-02 14:11:51.177: D/AndroidRuntime(410): >>>>>> AndroidRuntime START com.android.internal.os.RuntimeInit <<<<<< 10-02 14:11:51.177: D/AndroidRuntime(410): CheckJNI is ON 10-02 14:11:51.897: D/AndroidRuntime(410): Calling main entry com.android.commands.am.Am 10-02 14:11:51.937: I/ActivityManager(81): Force stopping package cz.trilimi.sfaui uid=10036 10-02 14:11:51.937: I/ActivityManager(81): Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10000000 cmp=cz.trilimi.sfaui/.ItemListActivity } from pid 410 10-02 14:11:51.968: W/WindowManager(81): Failure taking screenshot for (230x179) to layer 21005 10-02 14:11:51.997: I/ActivityManager(81): Start proc cz.trilimi.sfaui for activity cz.trilimi.sfaui/.ItemListActivity: pid=418 uid=10036 gids={} 10-02 14:11:52.007: D/AndroidRuntime(410): Shutting down VM 10-02 14:11:52.057: I/AndroidRuntime(410): NOTE: attach of thread 'Binder Thread #3' failed 10-02 14:11:52.097: D/dalvikvm(410): GC_CONCURRENT freed 98K, 83% free 360K/2048K, paused 1ms+0ms 10-02 14:11:52.097: D/jdwp(410): adbd disconnected 10-02 14:11:53.147: W/ActivityThread(418): Application cz.trilimi.sfaui is waiting for the debugger on port 8100... 10-02 14:11:53.207: I/System.out(418): Sending WAIT chunk 10-02 14:11:53.217: I/dalvikvm(418): Debugger is active 10-02 14:11:53.447: I/System.out(418): Debugger has connected 10-02 14:11:53.457: I/System.out(418): waiting for debugger to settle... 10-02 14:11:53.637: I/ARMAssembler(32): generated scanline__00000177:03515104_00001002_00000000 [ 87 ipp] (110 ins) at [0x407c76f0:0x407c78a8] in 598498 ns 10-02 14:11:53.660: I/System.out(418): waiting for debugger to settle... 10-02 14:11:53.857: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.057: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.257: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.317: V/TLINE(81): new: android.text.TextLine@4155dde8 10-02 14:11:54.467: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.667: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.870: I/System.out(418): waiting for debugger to settle... 10-02 14:11:55.027: D/dalvikvm(143): GC_EXPLICIT freed 900K, 16% free 14420K/17031K, paused 7ms+4ms 10-02 14:11:55.067: I/System.out(418): waiting for debugger to settle... 10-02 14:11:55.292: I/System.out(418): debugger has settled (1315) 10-02 14:12:02.008: W/ActivityManager(81): Launch timeout has expired, giving up wake lock! 10-02 14:12:02.971: W/ActivityManager(81): Activity idle timeout for ActivityRecord{4078c6b0 cz.trilimi.sfaui/.ItemListActivity} 10-02 14:12:08.359: D/ExchangeService(320): Received deviceId from Email app: androidc259148960 10-02 14:12:08.507: D/ExchangeService(320): Reconciling accounts... 10-02 14:16:11.437: D/SntpClient(81): request time failed: java.net.SocketException: Address family not supported by protocol 10-02 14:17:21.573: W/jdwp(418): Debugger is telling the VM to exit with code=1 10-02 14:17:21.573: I/dalvikvm(418): GC lifetime allocation: 8642 bytes 10-02 14:17:21.637: D/Zygote(33): Process 418 exited cleanly (1) 10-02 14:17:21.651: I/ActivityManager(81): Process cz.trilimi.sfaui (pid 418) has died. 10-02 14:17:21.847: D/dalvikvm(143): GC_EXPLICIT freed <1K, 16% free 14420K/17031K, paused 7ms+7ms 10-02 14:17:21.917: W/InputManagerService(81): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@40bfbf28

  Read the article

• Rails Routing Broken In Production - Caching of routes.rb suspected

  - by ming yeow

  Hi folks, i have an urgent problem. Essentially, my routing works on my localhost. But when i deployed this to production, the routes does not seem to work correctly. For example, given a new route "/invites" - sometimes i will get a 404, and sometimes it will work correctly. I suspect there is some caching going on somewhere, but i am not sure. Logs: when a page is not found (when the routes are supposed to be accurate) Processing UsersController#network (for 67.180.78.126 at 2010-06-01 09:59:31) [GET] Parameters: {"id"="new"} ActionController::RoutingError (No route matches "/comm/role_playing_games" with {}): app/controllers/application_controller.rb:383:in prev_page_label' app/controllers/application_controller.rb:238:in log_timed_info' app/controllers/users_controller.rb:155:in network' app/controllers/users_controller.rb:151:in network' app/controllers/application_controller.rb:44:in turn_on_query_caching' app/controllers/application_controller.rb:43:in turn_on_query_caching' app/controllers/application_controller.rb:42:in turn_on_query_caching' app/controllers/application_controller.rb:41:in turn_on_query_caching' app/controllers/application_controller.rb:40:in turn_on_query_caching' app/controllers/application_controller.rb:39:in turn_on_query_caching' haml (3.0.6) lib/sass/plugin/rack.rb:41:in `call' Rendering /mnt/app/releases/20100524233313/public/404.html (404 Not Found)

  Read the article

• Regex to find external links from the html file using grep

  - by Amar

  hello, From past few days I'm trying to develop a regex that fetch all the external links from the web pages given to it using grep. Here is my grep command grep -h -o -e "\(\(mailto:\|\(\(ht\|f\)tp\(s\?\)\)\)\://\)\{1\}\(.*\?\)" "/mnt/websites_folder/folder_to_search" -r now the grep seem to return everything after the external links in that given line Example if an html file contain something like this on same line GoogleYahoo then the given grep command return the following result http://www.google.com">Google</a><p><a href='https://yahoo.com'>Yahoo</a></p> the idea here is that if an html file contain more than one links(`irrespective in a,img etc`) in same line then the regex should fetch only the links and not all content of that line I managed to developed the same in rubular.com the regex is as follow ("|')(\b((ht|f)tps?:\/\/)(.*?)\b)("|') with work with the above input but iam not able to replicate the same in grep can anyone help I can't modify the html file so don't ask me to do that neither I can look for each specific tags and check their attributes to to get external links as it addup processing time and my application doesn't demand that Thank You

  Read the article

• SharpSSH gets stuck in an infinite stream read in C# SSH app

  - by Ric Coles

  Afternoon all, I'm having a small problem with the SharpSSH library for .Net (see http://www.tamirgal.com/blog/page/SharpSSH.aspx) SshStream ssh = new SshStream("some ip address", "some username", "some password"); ssh.Prompt = "\n"; ssh.RemoveTerminalEmulationCharacters = true; ssh.Write("ssh some ip address"); // Don't care about this response ssh.ReadResponse(); ssh.Write("lss /mnt/sata[1-4]"); // Don't care about this response (for now) ssh.ReadResponse(); // while the stream can be read while (ssh.CanRead) { Console.WriteLine(ssh.ReadResponse()); } ssh.Close(); As you can see, it's fairly straight forward. However, when the while-loop gets stepped into, it won't break out of the loop when everything has been printed to the console and there is nothing else to read. Is there anyway I can manually force it to break when there is nothing else to be read? Cheers, Ric

  Read the article

• Android: Displaying Video on VideoView

  - by AndroidDev93

  I'm trying to display a video in my sdcard on the video view. Here is my code: String name = Environment.getExternalStorageDirectory() + "/test.mp4"; final VideoView videoView = (VideoView)findViewById(R.id.videoView1); videoView.setOnPreparedListener(new MediaPlayer.OnPreparedListener() { public void onPrepared(MediaPlayer arg0) { videoView.start(); } }); videoView.setVideoPath(name); The file I am trying to open is called test.mp4 and its located within the sdcard folder. I get an error saying the application has unfortunately stopped. I would appreciate it if someone could help me. Thanks. EDIT : I used the debugger and found out that I get an InvocationTargetException. The detailed message says that : Failure delivering result ResultInfo{who=null, request=1001, result=-1, data=Intent { dat=file:///mnt/sdcard/test.mp4 }} to activity : java.lang.NullPointerException EDIT : I looked at the logcat again and it seems to give the error at videoView.setOnPreparedListener(new MediaPlayer.OnPreparedListener() { I'm guessing either videoView or MediaPlayer is null.

  Read the article

• How do I index documents in SOLR?

  - by Shane

  Hi there, Im running Solr 1.4 on Ubuntu 10.04 (installed via apt-get solr-tomcat) and it seems to be working fine. Im having some difficulty finding any coherent info on how to index documents though. Im new to SOLR so bear with me! I have a folder (/mnt/folder) that is a mounted windows share, which contains Word and PDF files that I would like indexed, whats the easiest way to get SOLR to index the entire folder? The documentation for SOLR is pretty poor, its impossilbe to find any decent tutorials on getting things done with it so any help is greatly appreciated! S

  Read the article

• Urgent Problem: Production site is breaking because of cached routes

  - by ming yeow

  Hi folks, i have an urgent problem. Essentially, my routing works on my localhost. But when i deployed this to production, the routes does not seem to work correctly. For example, given a new route "/invites" - sometimes i will get a 404, and sometimes it will work correctly. I suspect there is some caching going on somewhere, but i am not sure. Can someone help? UPDATE: when a page is not found (when it is supposed to be ok ) Processing UsersController#network (for 67.180.78.126 at 2010-06-01 09:59:31) [GET] Parameters: {"id"="new"} ActionController::RoutingError (No route matches "/comm/role_playing_games" with {}): app/controllers/application_controller.rb:383:in prev_page_label' app/controllers/application_controller.rb:238:in log_timed_info' app/controllers/users_controller.rb:155:in network' app/controllers/users_controller.rb:151:in network' app/controllers/application_controller.rb:44:in turn_on_query_caching' app/controllers/application_controller.rb:43:in turn_on_query_caching' app/controllers/application_controller.rb:42:in turn_on_query_caching' app/controllers/application_controller.rb:41:in turn_on_query_caching' app/controllers/application_controller.rb:40:in turn_on_query_caching' app/controllers/application_controller.rb:39:in turn_on_query_caching' haml (3.0.6) lib/sass/plugin/rack.rb:41:in `call' Rendering /mnt/app/releases/20100524233313/public/404.html (404 Not Found)

  Read the article

• What value to use for include_path in .htaccess

  - by bateman_ap

  Currently in my .htaccess file I am setting include_path such as this: php_value include_path /mnt/webs/mysite/includes:/usr/share/pear However this isn't great if I need to put my sites on a new server as I need to go through a whole load of sites updating each .htaccess. Basically would like a way to basically say "use the folder called includes in the site root (I run a variety of different sites off one server so each .htaccess file and include path will be different). In a related question on here I had someone use: inclue(dirname(__FILE__)."/inc2.php"); But this is in code and might be a bit annoying to do everytime, however should I just use this method and scrap the idea of using .htaccess?

  Read the article

• How to recover dpkg from corrupted downloads?

  - by rocker9455

  I just upgraded to the 10.10 RC earlier and had a few problems with graphic drivers (x didnt start) But i have remedied that now. When i run 'sudo apt-get install -f' i get this: will@UbuntuBox:/mnt/slax$ sudo apt-get install -f [sudo] password for will: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libmono-wcf3.0-cil openoffice.org-calc openoffice.org-core The following NEW packages will be installed: libmono-wcf3.0-cil The following packages will be upgraded: openoffice.org-calc openoffice.org-core 2 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 16 not fully installed or removed. Need to get 0B/32.5MB of archives. After this operation, 1,929kB disk space will be freed. Do you want to continue [Y/n]? Y (Reading database ... 201565 files and directories currently installed.) Preparing to replace openoffice.org-calc 1:3.2.1-6ubuntu2~10.04.1 (using .../openoffice.org-calc_1%3a3.2.1-7ubuntu1_i386.deb) ... Unpacking replacement openoffice.org-calc ... xz: (stdin): Compressed data is corrupt dpkg-deb: subprocess <decompress> returned error exit status 1 dpkg: error processing /var/cache/apt/archives/openoffice.org-calc_1%3a3.2.1-7ubuntu1_i386.deb (--unpack): short read on buffer copy for backend dpkg-deb during `./usr/lib/openoffice/basis3.2/program/libscfiltli.so' dpkg: regarding .../openoffice.org-core_1%3a3.2.1-7ubuntu1_i386.deb containing openoffice.org-core: openoffice.org-core conflicts with openoffice.org-calc (<< 1:3.2.1-7ubuntu1) openoffice.org-calc (version 1:3.2.1-6ubuntu2~10.04.1) is present and installed. dpkg: error processing /var/cache/apt/archives/openoffice.org-core_1%3a3.2.1-7ubuntu1_i386.deb (--unpack): conflicting packages - not installing openoffice.org-core Unpacking libmono-wcf3.0-cil (from .../libmono-wcf3.0-cil_2.6.7-3ubuntu1_all.deb) ... dpkg-deb (subprocess): data: internal gzip read error: '<fd:0>: data error' dpkg-deb: subprocess <decompress> returned error exit status 2 dpkg: error processing /var/cache/apt/archives/libmono-wcf3.0-cil_2.6.7-3ubuntu1_all.deb (--unpack): subprocess dpkg-deb --fsys-tarfile returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/openoffice.org-calc_1%3a3.2.1-7ubuntu1_i386.deb /var/cache/apt/archives/openoffice.org-core_1%3a3.2.1-7ubuntu1_i386.deb /var/cache/apt/archives/libmono-wcf3.0-cil_2.6.7-3ubuntu1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Any idea how i can get the broken packages fixed? Cheers, Will

  Read the article

• Raid superblock missing on single parition. Recovery needed!

  - by user171639

  Ok so I have a 2 TB raid 1 setup that has three partitions: sdc1: linux sdc2: swap sdc3: LVM for data However the LVM will no longer mount. So I thought that I would take the first drive, mount it in linux (ive done this b4), and reset the spare drive to copy the data. Normally I can mount a single drive for data recovery using: sudo su apt-get install mdadm lvm2 mdadm --assemble --scan modprobe dm-mod vgscan vgchange -ay c mount -o ro /dev/c/c /mnt Unfortunately, vgscan doesnot recognize the data partition. It appears as though the superblock on the first drive's data partition was erased while syncing with the second. So now I cannot mount that partition and the second drive is stuck in spare mode. Any ideas? Or a way to force mount the data partition just to copy the data? knoppix@Microknoppix:~$ sudo su root@Microknoppix:/home/knoppix# apt-get install mdadm lvm2 Reading package lists... Done Building dependency tree Reading state information... Done lvm2 is already the newest version. mdadm is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 551 not upgraded. root@Microknoppix:/home/knoppix# mdadm --assemble --scan mdadm: /dev/md/1 has been started with 1 drive (out of 2). mdadm: /dev/md/0 has been started with 1 drive (out of 2). root@Microknoppix:/home/knoppix# modprobe dm-mod root@Microknoppix:/home/knoppix# vgscan Reading all physical volumes. This may take a while... No volume groups found root@Microknoppix:/home/knoppix# cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdc1[2] 4193268 blocks super 1.2 [2/1] [U_] md1 : active raid1 sdc2[2] 524276 blocks super 1.2 [2/1] [U_] unused devices: <none> root@Microknoppix:/home/knoppix# mdadm -v --assemble --auto=yes /dev/md2 /dev/sdc3 mdadm: looking for devices for /dev/md2 mdadm: no recogniseable superblock on /dev/sdc3 mdadm: /dev/sdc3 has no superblock - assembly aborted root@Microknoppix:/home/knoppix# dumpe2fs /dev/md0 | grep -i superblock dumpe2fs 1.42.4 (12-Jun-2012) Primary superblock at 0, Group descriptors at 1-1 Backup superblock at 32768, Group descriptors at 32769-32769 Backup superblock at 98304, Group descriptors at 98305-98305 Backup superblock at 163840, Group descriptors at 163841-163841 Backup superblock at 229376, Group descriptors at 229377-229377 Backup superblock at 294912, Group descriptors at 294913-294913 Backup superblock at 819200, Group descriptors at 819201-819201 Backup superblock at 884736, Group descriptors at 884737-884737 root@Microknoppix:/home/knoppix# Notes: I can read the super block from the spare drive. I was gonna try and restore the superblock from one of the backups, but i dont know how or if this would work. I also heard creating a new array (mdadm --create) using the same parameters will not delete the data on the drive but i didnt want to risk it. Recommendations?

  Read the article

• Apache reverse-proxy intermittent error 113 - No route to host

  - by BonkaBonka

  I've got an Apache 2.0.52 server on CentOS 4 that front-ends a couple of App servers (mix of Jetty and Tomcat). Apache has a handful of virtual hosts configured like this: <VirtualHost www1.example.com:443> ServerName www1.example.com DocumentRoot "/mnt/app_web/html" SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt SSLCertificateChainFile /etc/httpd/conf/ssl.crt/chain.crt SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 RewriteEngine on RewriteRule ^/app1/(.*)$ http://app1.example.com:8080/app1/$1 [P,L] RewriteRule ^/app2/(.*)$ http://app2.example.com:8080/app2/$1 [P,L] </VirtualHost> However, I'm getting the following errors in the logs intermittently: [Fri Dec 04 07:19:41 2009] [error] (113)No route to host: proxy: HTTP: attempt to connect to 10.0.0.1:8080 (app1.example.com) failed I initially tried turning off IPv6, and that seemed to largely cure it, but I still have sporadic bursts of these messages. Additionally, we're running memcache on same front-end and during the times when I'm getting those messages in Apache's log, the following command doesn't work: echo stats | nc 127.0.0.1 11211 No messages are printed, but neither are the stats printed. I am completely lost as to how to proceed with troubleshooting this. =(

  Read the article

• Samba Server Make Multiple User Permissions Profiles

  - by Scriptonaut

  I have a Samba file server running, and I was wondering how I could make multiple user accounts that have different permissions. For example, at the moment I have a user, smbusr, but when I ssh to the share, I can read, write, execute, and even navigate out of the samba directory and do stuff on the actual computer. This is bad because I want to be able to give out my IP so friends/family can use the server, but I don't want them to be able to do just anything. I want to lock the user in the samba share directory(and all the sub directories). Eventually I would like several profiles such as (smbusr_R, smbusr_RW, smbguest_R, smbguest_RW). I also have a second question related to this, is SSH the best method to connect from other unix machines? What about VPN? Or simply mounting like this: mount -t ext3 -o user=username //ipaddr/share /mnt/mountpoint Is that mounting command above the same thing as a vpn? This is really confusing me. Thanks for the help guys, let me know if you need to see any files, or need anymore information.

  Read the article

• Samba Server Make Multiple User Permissions Profiles

  - by Scriptonaut

  I have a Samba file server running, and I was wondering how I could make multiple user accounts that have different permissions. For example, at the moment I have a user, smbusr, but when I ssh to the share, I can read, write, execute, and even navigate out of the samba directory and do stuff on the actual computer. This is bad because I want to be able to give out my IP so friends/family can use the server, but I don't want them to be able to do just anything. I want to lock the user in the samba share directory(and all the sub directories). Eventually I would like several profiles such as (smbusr_R, smbusr_RW, smbguest_R, smbguest_RW). I also have a second question related to this, is SSH the best method to connect from other unix machines? What about VPN? Or simply mounting like this: mount -t ext3 -o user=username //ipaddr/share /mnt/mountpoint Is that mounting command above the same thing as a vpn? This is really confusing me. Thanks for the help guys, let me know if you need to see any files, or need anymore information.

  Read the article

• CentOS 5.5 ext4 conversion problem - ext4 partition is recognized as ext3

  - by FractalizeR

  Hello. I had 5.4 machine. Upgraded to 5.5 today via yum upgrade. All went fine. Rebooted. Wanted to convert root partition to ext4 (I have three partitions: /boot, / and swap). All of them on software RAID 1 (root is /dev/md2). I did the following for converting yum install e4fsprogs tune2fs -O extents,uninit_bg,dir_index /dev/md2 nano /etc/fstab # I indicated here that my /dev/md2 is of ext4 uname -a mkinitrd -f /boot/initrd-2.6.18-194.3.1.el5.img 2.6.18-194.3.1.el5 Rebooted. I expected fsck to start automatically as said on some site. But it did not. Threw some error (don't remember exactly which). Ok, I booted linux rescue and executed fsck: fsck -t ext4 -fy /dev/md2 Partition went fine. But still when I boot main system, it says in log: "ext3-fs:" then something about not being able to mount ext3 partition due to unknown extended attributed (200). I booted linux rescue again. It loads fine and correctly determines all my machine partitions both ext3 (boot) and ext4 (/) under /mnt/sysimage just fine. I retried mkinitrd thing again watching it's output and ensured ext4 module is included into the system. I also edited menu.lst grub file to include rootfstype=ext4 kernel parameter. Bad luck. I still have message from ext3-fs about not being able to mount filesystem because of attributes and kernel panic immediately after. I checked /etc/fstab - it's fine and saying that root is of ext4. What did I do wrong? This machine is empty so I can just reformat it with 5.5 and recreate partitions to be originally ext4. But... I just want to know what did I do wrong.

  Read the article

• mdadm superblock hiding/shadowing partition

  - by Kjell Andreassen

  Short version: Is it safe to do mdadm --zero-superblock /dev/sdd on a disk with a partition (dev/sdd1), filesystem and data? Will the partition be mountable and the data still there? Longer version: I used to have a raid6 array but decided to dismantle it. The disks from the array are now used as non-raid disks. The superblocks were cleared: sudo mdadm --zero-superblock /dev/sdd The disks were repartitioned with fdisk and filesystems created with mfks.ext4. All disks where mounted and everything worked fine. Today, a couple of weeks later, one of the disks is failing to be recognized when trying to mount it, or rather the single partition on it. sudo mount /dev/sdd1 /mnt/tmp mount: special device /dev/sdd1 does not exist fdisk claims there to be a partition on it: sudo fdisk -l /dev/sdd Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb06f6341 Device Boot Start End Blocks Id System /dev/sdd1 1 243201 1953512001 83 Linux Of course mount is right, the device /dev/sdd1 is not there, I'm guessing udev did not create it because of the mdadm data still on it: sudo mdadm --examine /dev/sdd /dev/sdd: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : b164e513:c0584be1:3cc53326:48691084 Name : pringle:0 (local to host pringle) Creation Time : Sat Jun 16 21:37:14 2012 Raid Level : raid6 Raid Devices : 6 Avail Dev Size : 3907027120 (1863.02 GiB 2000.40 GB) Array Size : 15628107776 (7452.06 GiB 8001.59 GB) Used Dev Size : 3907026944 (1863.02 GiB 2000.40 GB) Data Offset : 2048 sectors Super Offset : 8 sectors State : clean Device UUID : 3ccaeb5b:843531e4:87bf1224:382c16e2 Update Time : Sun Aug 12 22:20:39 2012 Checksum : 4c329db0 - correct Events : 1238535 Layout : left-symmetric Chunk Size : 512K Device Role : Active device 3 Array State : AA.AAA ('A' == active, '.' == missing) My mdadm --zero-superblock apparently didn't work. Can I safely try it again without losing data? If not, are there any suggestion on what do to? Not starting mdadm at all on boot might be a (somewhat unsatisfactory) solution.

  Read the article

• Apache Won't Restart After Compiling PHP with Postgres

  - by gonzofish

  I've compiled PHP (v5.3.1) with Postgres using the following configure: ./configure \ --build=x86_64-redhat-linux-gnu \ --host=x86_64-redhat-linux-gnu \ --target=x86_64-redhat-linux-gnu \ --program-prefix= \ --prefix=/usr/ \ --exec-prefix=/usr/ \ --bindir=/usr/bin/ \ --sbindir=/usr/sbin/ \ --sysconfdir=/etc \ --datadir=/usr/share \ --includedir=/usr/include/ \ --libdir=/usr/lib64 \ --libexecdir=/usr/libexec \ --localstatedir=/var \ --sharedstatedir=/usr/com \ --mandir=/usr/share/man \ --infodir=/usr/share/info \ --cache-file=../config.cache \ --with-libdir=lib64 \ --with-config-file-path=/etc \ --with-config-file-scan-dir=/etc/php.d \ --with-pic \ --disable-rpath \ --with-pear \ --with-pic \ --with-bz2 \ --with-exec-dir=/usr/bin \ --with-freetype-dir=/usr \ --with-png-dir=/usr \ --with-xpm-dir=/usr \ --enable-gd-native-ttf \ --with-t1lib=/usr \ --without-gdbm \ --with-gettext \ --without-gmp \ --with-iconv \ --with-jpeg-dir=/usr \ --with-openssl \ --with-zlib \ --with-layout=GNU \ --enable-exif \ --enable-ftp \ --enable-magic-quotes \ --enable-sockets \ --enable-sysvsem \ --enable-sysvshm \ --enable-sysvmsg \ --with-kerberos \ --enable-ucd-snmp-hack \ --enable-shmop \ --enable-calendar \ --with-libxml-dir=/usr \ --enable-xml \ --with-system-tzdata \ --with-mime-magic=/usr/share/file/magic \ --with-apxs2=/usr/sbin/apxs \ --with-mysql=/usr/include/mysql \ --without-gd \ --with-dom=/usr/include/libxml2/libxml \ --disable-dba \ --without-unixODBC \ --disable-pdo \ --enable-xmlreader \ --enable-xmlwriter \ --without-sqlite \ --without-sqlite3 \ --disable-phar \ --enable-fileinfo \ --enable-json \ --without-pspell \ --disable-wddx \ --with-curl=/usr/include/curl \ --enable-posix \ --with-mcrypt \ --enable-mbstring \ --with-pgsql=/mnt/mv/pgsql I'm using Postgres 8.4.0 and Apache 2.2.8; I have the following line in my Apache conf file: LoadModule php5_module /usr/lib64/httpd/modules/libphp5.so And when I attempt to restart Apache, I get the following error message: Starting httpd: httpd: Syntax error on line 205 of /etc/httpd/conf/httpd.conf: Cannot load /usr/lib64/httpd/modules/libphp5.so into server: /usr/lib64/httpd/modules/libphp5.so: undefined symbol: lo_import_with_oid Now, I know that this is a problem with Postgres with PHP because lo_import_with_oid is a function in the Postgres source which allows the importing of large objects; also, if I remove the --with-pgsql option, PHP and Apache get along great. I've scoured the Internet looking for answers all day, but to no avail. Does anyone have ANY insight into what is causing my problems.

  Read the article

• Getting an error when mounting LVM snapshot

  - by Sandra

  I have migrated a file based Xen guest to LVM using dd bs=1M if=/dev/zero of=/dev/vg00/vm10 qemu-img convert ~/vm10.qcow2 -O raw /dev/vg00/vm10 and changed the Xen domain file for the VM to use the LV instead of the old file. The VM boots up, and now on the Xen host would I like to make a snapshot of the running VM. # lvcreate --size 10G --snapshot --name vm10-snapshot /dev/vg00/vm10 Logical volume "vm10-snapshot" created # mount /dev/vg00/vm10-snapshot /mnt/snapshot/ mount: you must specify the filesystem type # dmesg |tail EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. hfs: unable to find HFS+ superblock VFS: Can't find ext3 filesystem on dev dm-4. hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock VFS: Can't find ext3 filesystem on dev dm-2. hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock For some reason it can't see it is an EXT3 filesystem. I have also tried to mount with -t ext3, but still didn't mount. # lvdisplay --- Logical volume --- LV Name /dev/vg00/vm10 VG Name vg00 LV UUID I1y1vQ-Bac5-5jwW-melh-TY5h-l9NO-qaelKk LV Write Access read/write LV snapshot status source of /dev/vg00/vm10-snapshot [active] LV Status available # open 2 LV Size 8.00 GB Current LE 2048 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Name /dev/vg00/vm10-snapshot VG Name vg00 LV UUID GWsOx3-TPpr-GW64-uiMz-u1YN-QU4h-l0Kala LV Write Access read/write LV snapshot status active destination for /dev/vg00/vm10 LV Status available # open 0 LV Size 8.00 GB Current LE 2048 COW-table size 10.00 GB COW-table LE 2560 Allocated to snapshot 0.00% Snapshot chunk size 4.00 KB Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:4 # What could the problem be?

  Read the article

• Bacula & Multiple Tape Devices, and so on

  - by Tom O'Connor

  Bacula won't make use of 2 tape devices simultaneously. (Search for #-#-# for the TL;DR) A little background, perhaps. In the process of trying to get a decent working backup solution (backing up 20TB ain't cheap, or easy) at $dayjob, we bought a bunch of things to make it work. Firstly, there's a Spectra Logic T50e autochanger, 40 slots of LTO5 goodness, and that robot's got a pair of IBM HH5 Ultrium LTO5 drives, connected via FibreChannel Arbitrated Loop to our backup server. There's the backup server.. A Dell R715 with 2x 16 core AMD 62xx CPUs, and 32GB of RAM. Yummy. That server's got 2 Emulex FCe-12000E cards, and an Intel X520-SR dual port 10GE NIC. We were also sold Commvault Backup (non-NDMP). Here's where it gets really complicated. Spectra Logic and Commvault both sent respective engineers, who set up the library and the software. Commvault was running fine, in so far as the controller was working fine. The Dell server has Ubuntu 12.04 server, and runs the MediaAgent for CommVault, and mounts our BlueArc NAS as NFS to a few mountpoints, like /home, and some stuff in /mnt. When backing up from the NFS mountpoints, we were seeing ~= 290GB/hr throughput. That's CRAP, considering we've got 20-odd TB to get through, in a <48 hour backup window. The rated maximum on the BlueArc is 700MB/s (2460GB/hr), the rated maximum write speed on the tape devices is 140MB/s, per drive, so that's 492GB/hr (or double it, for the total throughput). So, the next step was to benchmark NFS performance with IOzone, and it turns out that we get epic write performance (across 20 threads), and it's like 1.5-2.5TB/hr write, but read performance is fecking hopeless. I couldn't ever get higher than 343GB/hr maximum. So let's assume that the 343GB/hr is a theoretical maximum for read performance on the NAS, then we should in theory be able to get that performance out of a) CommVault, and b) any other backup agent. Not the case. Commvault seems to only ever give me 200-250GB/hr throughput, and out of experimentation, I installed Bacula to see what the state of play there is. If, for example, Bacula gave consistently better performance and speeds than Commvault, then we'd be able to say "**$.$ Refunds Plz $.$**" #-#-# Alas, I found a different problem with Bacula. Commvault seems pretty happy to read from one part of the mountpoint with one thread, and stream that to a Tape device, whilst reading from some other directory with the other thread, and writing to the 2nd drive in the autochanger. I can't for the life of me get Bacula to mount and write to two tape drives simultaneously. Things I've tried: Setting Maximum Concurrent Jobs = 20 in the Director, File and Storage Daemons Setting Prefer Mounted Volumes = no in the Job Definition Setting multiple devices in the Autochanger resource. Documentation seems to be very single-drive centric, and we feel a little like we've strapped a rocket to a hamster, with this one. The majority of example Bacula configurations are for DDS4 drives, manual tape swapping, and FreeBSD or IRIX systems. I should probably add that I'm not too bothered if this isn't possible, but I'd be surprised. I basically want to use Bacula as proof to stick it to the software vendors that they're overpriced ;) I read somewhere that @KyleBrandt has done something similar with a modern Tape solution.. Configuration Files: *bacula-dir.conf* # # Default Bacula Director Configuration file Director { # define myself Name = backuphost-1-dir DIRport = 9101 # where we listen for UA connections QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = "/var/lib/bacula" PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 20 Password = "yourekiddingright" # Console password Messages = Daemon DirAddress = 0.0.0.0 #DirAddress = 127.0.0.1 } JobDefs { Name = "DefaultFileJob" Type = Backup Level = Incremental Client = backuphost-1-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = File Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" } JobDefs { Name = "DefaultTapeJob" Type = Backup Level = Incremental Client = backuphost-1-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = "SpectraLogic" Messages = Standard Pool = AllTapes Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" Prefer Mounted Volumes = no } # # Define the main nightly save backup job # By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir Job { Name = "BackupClient1" JobDefs = "DefaultFileJob" } Job { Name = "BackupThisVolume" JobDefs = "DefaultTapeJob" FileSet = "SpecialVolume" } #Job { # Name = "BackupClient2" # Client = backuphost-12-fd # JobDefs = "DefaultJob" #} # Backup the catalog database (after the nightly save) Job { Name = "BackupCatalog" JobDefs = "DefaultFileJob" Level = Full FileSet="Catalog" Schedule = "WeeklyCycleAfterBackup" # This creates an ASCII copy of the catalog # Arguments to make_catalog_backup.pl are: # make_catalog_backup.pl <catalog-name> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog" # This deletes the copy of the catalog RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup" Write Bootstrap = "/var/lib/bacula/%n.bsr" Priority = 11 # run after main backup } # # Standard Restore template, to be changed by Console program # Only one such job is needed for all Jobs/Clients/Storage ... # Job { Name = "RestoreFiles" Type = Restore Client=backuphost-1-fd FileSet="Full Set" Storage = File Pool = Default Messages = Standard Where = /srv/bacula/restore } FileSet { Name = "SpecialVolume" Include { Options { signature = MD5 } File = /mnt/SpecialVolume } Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } # List of files to be backed up FileSet { Name = "Full Set" Include { Options { signature = MD5 } File = /usr/sbin } Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } Schedule { Name = "WeeklyCycle" Run = Full 1st sun at 23:05 Run = Differential 2nd-5th sun at 23:05 Run = Incremental mon-sat at 23:05 } # This schedule does the catalog. It starts after the WeeklyCycle Schedule { Name = "WeeklyCycleAfterBackup" Run = Full sun-sat at 23:10 } # This is the backup of the catalog FileSet { Name = "Catalog" Include { Options { signature = MD5 } File = "/var/lib/bacula/bacula.sql" } } # Client (File Services) to backup Client { Name = backuphost-1-fd Address = localhost FDPort = 9102 Catalog = MyCatalog Password = "surelyyourejoking" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # # Second Client (File Services) to backup # You should change Name, Address, and Password before using # #Client { # Name = backuphost-12-fd # Address = localhost2 # FDPort = 9102 # Catalog = MyCatalog # Password = "i'mnotjokinganddontcallmeshirley" # password for FileDaemon 2 # File Retention = 30 days # 30 days # Job Retention = 6 months # six months # AutoPrune = yes # Prune expired Jobs/Files #} # Definition of file storage device Storage { Name = File # Do not use "localhost" here Address = localhost # N.B. Use a fully qualified name here SDPort = 9103 Password = "lalalalala" Device = FileStorage Media Type = File } Storage { Name = "SpectraLogic" Address = localhost SDPort = 9103 Password = "linkedinmakethebestpasswords" Device = Drive-1 Device = Drive-2 Media Type = LTO5 Autochanger = yes } # Generic catalog service Catalog { Name = MyCatalog # Uncomment the following line if you want the dbi driver # dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport = dbname = "bacula"; DB Address = ""; dbuser = "bacula"; dbpassword = "bbmaster63" } # Reasonable message delivery -- send most everything to email address # and to the console Messages { Name = Standard mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r" operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r" mail = root@localhost = all, !skipped operator = root@localhost = mount console = all, !skipped, !saved # # WARNING! the following will create a file that you must cycle from # time to time as it will grow indefinitely. However, it will # also keep all your messages if they scroll off the console. # append = "/var/lib/bacula/log" = all, !skipped catalog = all } # # Message delivery for daemon messages (no job). Messages { Name = Daemon mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula daemon message\" %r" mail = root@localhost = all, !skipped console = all, !skipped, !saved append = "/var/lib/bacula/log" = all, !skipped } # Default pool definition Pool { Name = Default Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year } # File Pool definition Pool { Name = File Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year Maximum Volume Bytes = 50G # Limit Volume size to something reasonable Maximum Volumes = 100 # Limit number of Volumes in Pool } Pool { Name = AllTapes Pool Type = Backup Recycle = yes AutoPrune = yes # Prune expired volumes Volume Retention = 31 days # one Moth } # Scratch pool definition Pool { Name = Scratch Pool Type = Backup } # # Restricted console used by tray-monitor to get the status of the director # Console { Name = backuphost-1-mon Password = "LastFMalsostorePasswordsLikeThis" CommandACL = status, .status } bacula-sd.conf # # Default Bacula Storage Daemon Configuration file # Storage { # definition of myself Name = backuphost-1-sd SDPort = 9103 # Director's port WorkingDirectory = "/var/lib/bacula" Pid Directory = "/var/run/bacula" Maximum Concurrent Jobs = 20 SDAddress = 0.0.0.0 # SDAddress = 127.0.0.1 } # # List Directors who are permitted to contact Storage daemon # Director { Name = backuphost-1-dir Password = "passwordslinplaintext" } # # Restricted Director, used by tray-monitor to get the # status of the storage daemon # Director { Name = backuphost-1-mon Password = "totalinsecurityabound" Monitor = yes } Device { Name = FileStorage Media Type = File Archive Device = /srv/bacula/archive LabelMedia = yes; # lets Bacula label unlabeled media Random Access = Yes; AutomaticMount = yes; # when device opened, read it RemovableMedia = no; AlwaysOpen = no; } Autochanger { Name = SpectraLogic Device = Drive-1 Device = Drive-2 Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" Changer Device = /dev/sg4 } Device { Name = Drive-1 Drive Index = 0 Archive Device = /dev/nst0 Changer Device = /dev/sg4 Media Type = LTO5 AutoChanger = yes RemovableMedia = yes; AutomaticMount = yes; AlwaysOpen = yes; RandomAccess = no; LabelMedia = yes } Device { Name = Drive-2 Drive Index = 1 Archive Device = /dev/nst1 Changer Device = /dev/sg4 Media Type = LTO5 AutoChanger = yes RemovableMedia = yes; AutomaticMount = yes; AlwaysOpen = yes; RandomAccess = no; LabelMedia = yes } # # Send all messages to the Director, # mount messages also are sent to the email address # Messages { Name = Standard director = backuphost-1-dir = all } bacula-fd.conf # # Default Bacula File Daemon Configuration file # # # List Directors who are permitted to contact this File daemon # Director { Name = backuphost-1-dir Password = "hahahahahaha" } # # Restricted Director, used by tray-monitor to get the # status of the file daemon # Director { Name = backuphost-1-mon Password = "hohohohohho" Monitor = yes } # # "Global" File daemon configuration specifications # FileDaemon { # this is me Name = backuphost-1-fd FDport = 9102 # where we listen for the director WorkingDirectory = /var/lib/bacula Pid Directory = /var/run/bacula Maximum Concurrent Jobs = 20 #FDAddress = 127.0.0.1 FDAddress = 0.0.0.0 } # Send all messages except skipped files back to Director Messages { Name = Standard director = backuphost-1-dir = all, !skipped, !restored }

  Read the article

• Are relative-path symlinks reliable on Rackspace Cloud Sites?

  - by Jakobud

  Rackspace's Cloud Sites have a lot of stupid limitations. For example, no SSH (in or out), no shell, no RSYNC, etc... (even through cron). Recently I learned that you can't reliably use symlinks in Cloud Sites. Apparently this is because the absolute path of your sites could change at any moment, since it's a shared host environment split up between many disks/servers. I guess different account's sites get moved from disk to disk whenever Rackspace decides to. Supposedly to increase efficiency across the board. So after talking with a Rackspace tech, he said they cannot guarantee that symlinks would always work. Obviously this is because if you have a symlink that use's an absolute path like this: //mnt/disk-34566/home/user34566/files/sites/www.mysite.com/mydir If you files go moved to a different disk (or whatever they do), then the absolute path would be different and the link would now be broken. That makes sense. So next, I asked the Rackspace tech if relative path symlinks were reliable. So if I have the following link: files/sites/www.mysite.com/mylink --> ../www.myothersite.com/anotherdir You can see that the symlink simply points to a nearby directory's sub-directory. He said they cannot guarantee that even those would always work either. Since it uses a relative path to another nearby directory I'm not sure how it could ever break from something Rackspace would do. Do relative symlinks somehow rely on absolute paths underneath? Or is Rackspace using some weird custom filesystem where they will break from absolute path changes? It seems like a relative-path symlink would be fine and would only break if the user did something to mess up the directories involved. But when the tech's say that they "don't officially support symlinks of any kind" that makes me hesitant to use them for large commercial websites in Cloud Sites. Can anyone with Rackspace experience give input on this topic?

  Read the article

• Setting up Windows SBS 2008 network on Xen

  - by samyboy

  I'm trying to install a Windows SBS 2008 server in a Xen environment. The OS is booting fine. Unfortunately I can't figure out how to set up the network settings. Dom0 is a Debian Lenny hosting around 10 virtual servers. Here are the settings I'm using in the hosted Windows SBS: IP address: 10.20.0.8 Network mask: 255.255.0.0 Gateway: 10.20.0.1 Note that during the installation stage, Windows set the net mask at 255.255.255.0 without letting me choose. Gross. Windows SBS tells me I have a "limited connection". I can't ping the gateway nor any other IP except localhost and it's own IP (10.20.0.8). Here is the Xen config file: kernel = '/usr/lib/xen-3.2-1/boot/hvmloader' builder = 'hvm' memory = '4096' device_model='/usr/lib/xen-3.2-1/bin/qemu-dm' acpi=1 apic=1 pae=1 vcpus=1 name = 'winexchange' # Disks disk = [ 'phy:/dev/wnghosts/exchange-disk,ioemu:hda,w', 'file:/mnt/freespace/ISO/DVD1_Installation.iso,ioemu:hdc:cdrom,r' ] # Networking vif = [ 'mac=00:16:3E:0A:D0:1B, type=ioemu, bridge=xenbr0'] # video stdvga=0 serial='pty' ne2000=0 # Behaviour boot='c' sdl=0 # VNC vfb = [ 'type=vnc' ] vnc=1 vncdisplay=1 vncunused=1 usbdevice='tablet' This config is working with others Windows XP domU's. I tried to change the ne2000 values with 0 and 1 with no effect. I am far from having good Windows administration skills so I guess I definitely need some help on this case. Thanks.

  Read the article

• Samba server NETBIOS name not resolving, WINS support not working

  - by Eric

  When I try to connect to my CentOS 6.2 x86_64 server's samba shares using address \\REPO (NETBIOS name of REPO), it times out and shows an error; if I do so directly via IP, it works fine. Furthermore, my server does not work correctly as a WINS server despite my samba settings being correct for it (see below for details). If I stop the iptables service, things work properly. I'm using this page as a reference for which ports to use: http://www.samba.org/samba/docs/server_security.html Specifically: UDP/137 - used by nmbd UDP/138 - used by nmbd TCP/139 - used by smbd TCP/445 - used by smbd I really really really want to keep the secure iptables design I have below but just fix this particular problem. SMB.CONF [global] netbios name = REPO workgroup = AWESOME security = user encrypt passwords = yes # Use the native linux password database #passdb backend = tdbsam # Be a WINS server wins support = yes # Make this server a master browser local master = yes preferred master = yes os level = 65 # Disable print support load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes # Restrict who can access the shares hosts allow = 127.0.0. 10.1.1. [public] path = /mnt/repo/public create mode = 0640 directory mode = 0750 writable = yes valid users = mangs repoman IPTABLES CONFIGURE SCRIPT # Remove all existing rules iptables -F # Set default chain policies iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP # Allow incoming SSH iptables -A INPUT -i eth0 -p tcp --dport 22222 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22222 -m state --state ESTABLISHED -j ACCEPT # Allow incoming HTTP #iptables -A INPUT -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT #iptables -A OUTPUT -o eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # Allow incoming Samba iptables -A INPUT -i eth0 -p udp --dport 137 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 137 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p udp --dport 138 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 138 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 139 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 139 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 445 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 445 -m state --state ESTABLISHED -j ACCEPT # Make these rules permanent service iptables save service iptables restart**strong text**

  Read the article

• Windows Share authentication from Active Directory Linux login

  - by Kenny

  I'm using Active Directory to log into RHEL. To do this, I followed the steps outlined here: http://www.markwilson.co.uk/blog/2007/05/using-active-directory-to-authenticate-users-on-a-linux-computer.htm I'd like to be able to read data from Windows Servers shared folders without being prompted for a password. On Windows I log into an AD domain, and when I access windows file shares on a server on the LAN (also part of the AD domain) my I can just access them with no authentication step. I've used SMBclient on Linux to access these shares, but it asks for my password. I would like to be able to script access to the data on the shares, but I can't if there's a password prompt in the way. Well, I could, but it's not how I want to do it. Now, since I'm logged in using my active directory username & password, can't I just access the shares without jumping that extra hoop? I know I can mount the share using something like: //192.168.0.5/share /mnt/windows cifs auto,username=steve,password=secret,rw 0 0 but access will depend who is logged in... each user logging in should have their own unique AD access privelages. Thanks for reading!

  Read the article

• Windows Share authentication from Active Directory Linux login

  - by Kenny

  Hi, I'm using Active Directory to log into RHEL. To do this, I followed the steps outlined here: http://www.markwilson.co.uk/blog/2007/05/using-active-directory-to-authenticate-users-on-a-linux-computer.htm I'd like to be able to read data from Windows Servers shared folders without being prompted for a password. On Windows I log into an AD domain, and when I access windows file shares on a server on the LAN (also part of the AD domain) my I can just access them with no authentication step. I've used SMBclient on Linux to access these shares, but it asks for my password. I would like to be able to script access to the data on the shares, but I can't if there's a password prompt in the way. Well, I could, but it's not how I want to do it. Now, since I'm logged in using my active directory username & password, can't I just access the shares without jumping that extra hoop? I know I can mount the share using something like: //192.168.0.5/share /mnt/windows cifs auto,username=steve,password=secret,rw 0 0 but access will depend who is logged in... each user logging in should have their own unique AD access privelages. Thanks for reading!

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21  | Next Page >