Search Results

Search found 7875 results on 315 pages for 'wired networking'.

Page 17/315 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• IPs on home network

  - by windchime

  I have a Linksys router and a Belkin wireless router at home. The Linksys router is connected to cable modem and two computers, as well as to the Belkin wireless router. A 3rd computer is connected to the Belkin router through Wifi. The IP addresses of the computers connected to Linksys are 192.168.1.101 and 192.168.1.102. The IP address of the Linksys router on LAN is 192.168.1.1. The IP address of the Belkin wireless router is 192.168.2.1(based on the 3rd computer's routing table) and the IP address of the 3rd computer is 192.168.2.5. If I ping 192.168.1.101 from 192.168.2.5, all are well. However, if I ping 192.168.2.5 from 192.168.1.101, Destination Host Unreachable. Why?

  Read the article

• How to gain admin privileges on D-Link router if my isp is not allowing me to do so?

  - by Fischer

  So I switched to new ISP yesterday, they gave me a D-Link router, can't use my old router. I want to change the wireless password, went to 192.168.1.1, I can login with the the username and password user user, but not as admin. On the catalog it says that the default username and password are admin admin, tried that didn't work. Tried admin and no pass, tried many combinations, none worked. I asked some other users and they said that the isp is blocking the users from logging in as admins, and blocking the reset button, and said that there's a hack where you do something like: cmd telnet "router ip" and do something like dumpcfg. Could you please give a better explanation on how to gain admin privileges on your own router if your isp is not letting you do so by default?

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• Unable to outside access service from inside LAN

  - by erotsppa

  I have a weird port forwarding problem. I tried to open my port 22 to the outside network. I was able to access it as long as I am not inside the LAN. I can access it from my office for example. But from within the LAN, I can access the port using the local ip, but I can't access the port using the external IP. It's as if the router is blocking the loopback. I've check all my router settings, turned off anything firewall/filtering related. Any ideas?

  Read the article

• Hardware, network infrastructure for runnng gaming server nd on VirtualGL

  - by archer

  Foud nice project VirtualGL (http://www.virtualgl.org/). Tried to run 3D fames (EVE Online, Prototype) on server and display the output on thin client using 100Mbps network. Server: Gentoo Linux on AMD Phoenom II x6 3.4Gz, 8GB RAM, 2x NVIDIA 9800 GTX in single session with display resulution 1024x768 on client. Performance is very promising. Going to increase network speed to 1Gbps (using either Ethernet or Fiber) and run 5-6 clients simultenously. My questions are: a) what would be better for network - 1Gbps Ethernet or Fiber (clients are distributed in max 20m around server)? Is that a must to use managed switch for better network performance? b) Should I increase number of video cards to put in SLI on server (going to use Gigabyte GA-890FXA-UD7 which has 6 PCIExpress slots [2 x4, 2 x8 and 2 x16]). Will it impact performance significantly. If I need to increase the number of video cards - what would be better - put 2 banks of video cards with 3 in bank using SLI, or 3 banks with 2 in the bank? Would linux recognize that and properly use all banks of video cards? c) any suggestions on good thin clients supporting 1920x1080 HDMI video and 1Gbps network I understand that my questions can't be answered clearly (unless someone already managed to use this kind of stuff ;)) although any suggestions would be very helpful.

  Read the article

• How to access internet from 2 laptops with data card plugged-in in one of the machine?

  - by learnerforever

  Hi, I have 2 laptops - one running Windows XP and other running Vista. Both have wifi card.I have one Reliance broadband data card. I want to be able to access internet on both the machines simultaneously using this one data card. Please help. I think, there would be many many ways to do it. I do have some linksys router but any simple quick way without any extra hardware? like we could set up p2p or WLAN between these 2 machines, because both have wifi card so we shouldn't compulsorily need any extra hardware(?) I am fine with connecting data card to either of the machines. Thanks,

  Read the article

• Why am I seeing MailSlot Browse messages on unrouted ports of my Linux box?

  - by nmichaels

  I have a Linux box (Debian squeeze) with several NICs. The ones of interest are: eth3 - my main link to the network (dhcp on 10.20.30.0/24) eth0 - the first connection to my test network (static: 192.168.1.2) eth4 - the second connection to my test network (static: 192.168.1.1) My routing table looks like this: $ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.20.30.0 * 255.255.255.0 U 0 0 0 eth3 default 10.20.30.254 0.0.0.0 UG 0 0 0 eth3 I have the 2 test net ports connected to each other with a crossover cable and an instance of wireshark running on each port. Every once in a while, I'll see a packet like the following show up. Who could be doing this, and how do I convince them to stop? I do have Samba running on the machine (for a cifs mount) but don't see why it would be sending packets out to unrouted ports. I had a Windows VM running in VMWare Client and thought that might be causing it, but it still happens without it. What I want is totally silent interfaces so I can run some tests with Scapy over them.

  Read the article

• How can I auto-connect to a WPA2 Enterprise network?

  - by Demetri

  I would like my computer to automatically connect to a WPA2-Enterprise network as soon as it boots whenever the network is available, without any action needed by me. The computer already offers to connect, and even remembers the password, but I must still hit 'Enter' to connect. Also, connection does not occur if my login is at the terminal. I would like to automatically connect every time I login, no matter how I do so, unless a more preferred network is available. What is the best way to do this? I am running Fedora 19. A shell script that can be invoked at the terminal would be preferred. Connecting even if the Gnome-desktop has not launched is a must.

  Read the article

• DD-WRT (WRT54G) and (THOMSON TG782) how to put them togather?

  - by FeRtoll

  Ok so let me explain, i bought WRT54G and successfully installed DD-WRT v24-sp1 (07/26/08) mini-special - build 9994. That's all ok no problems with it all normal functioning. And just to add (i don't need wireless, wireless is turned off always) What i want: ISP's router (TG782) from it's INTERNET port(out) cable "which was before in my pc" is connected to WRT54G's INTERNET port and then from WRT54G LAN port 1 to my pc. The problem: How do i connect and setup all? I have tried many times on many different ways but cant get it to work IF THE CABLE FROM TG782 IS CONNECTED TO WRT54G ON INTERNET PORT. If i connect the TG782 to Lan port 1 on WRT54G and my pc to lan port 2 then all works fine after i setup gateway and all. But i want to connect TG782 to Internet port of WRT54G because i need "Access Restrictions" and this only goes through WAN right? please correct me if i am wrong. What i have tried: This is how i have tried to setup all. The TG782 router ip is 192.168.1.1 And WRT54G ip is 192.168.1.30 so in WRT54G control panel i have setup like this: ----WAN Connection Type---- Connection Type: Automatic Configuration - DHCP STP: Disabled ----Router IP---- Local IP Address: 192.168.1.30 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 (the TG782) ----Network Address Server Settings (DHCP)---- DHCP Type: DHCP Server Start IP Address: 192.168.1.100 Maximum DHCP Users: 6 And this wont work i probably miss something more, if anyone can help i would be thankfull. Also i have to note that i have tried to set my network adapter on pc to use the gateway of WRT54G and ip 192.168.1.102 In short: i cant get it to work normal only as a switch! Thanks for any help! -------EDIT:------- Here is an image which maybe can help: http://img27.imageshack.us/img27/4227/allin1w.jpg

  Read the article

• 2 routers, both DHCP, no IP assigned

  - by piobyz

  I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

  Read the article

• Which one should I choose: gateway or router?

  - by Jader Dias

  My router allows me to choose between gateway and router (RIP1/RIP2). Which is the best option and why?

  Read the article

• Wi-Fi connected but can't go to any site

  - by Michael Dy

  My Windows 7 laptop can connect to our Wi-Fi signal, I can sign in on Yahoo! Messenger, but I can't go to any site. I can access the Net on other devices. The issue started a few weeks ago, so I've been troubleshooting since then in vain. There's no virus, and I already used System Restore. In Wireless Network Connection Status, the received activity is greater than the sent activity. I turned off Windows Firewall and still no Net access. My ping tests: How do I fix this?

  Read the article

• Error while bringing up eth1

  - by mhay

  I'm getting this error while bringing up my network card: (process:2550): WARNING **: _nm_object_get_property: Error getting 'State' for /org/freedesktop/NetworkManager/ActiveConnection/3: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist I'm using the following commands: 1. ifup eth1 2. /etc/init.d/network restart I have installed a fresh copy of Centos 6.2 and configured the network card.

  Read the article

• How to remap IPs visible from local machine to IPs visible from a machine I have SSH access to?

  - by gooli

  I'm so far out of my depth I don't even know what to google for. There's a server I can connect to via SSH. Via that server I can access other server on its subnet via SSH. What I want to do is be able to access the machines that server has access to directly. Say the server IP is 192.168.7.7 and is the only one in the 192.168.x.x range I have access to. I'd like to configure things in such a way that when I to access say 192.168.7.100 on my machine, the connection will go through an SSH tunnel I open to 192.168.7.7 and out to 192.168.7.100. I would like this to work for any port if at all possible. I know I can set an HTTP proxy and even a SOCKS proxy, but I'm wondering is there is a way to actually remap some of the IP my machine sees to IP only visible from the remote machine. What would this configuration be called? IS this NAT, VPN, IP2IP or something else? How can I set up this on a Windows client box that connects via SSH to a Linux box? Sounds to me like I need to set up some kind of filtering on the network driver or possibly a virtual NIC, but I'm not sure where to go next.

  Read the article

• What do I need to do to set my computer as Default Gateway?

  - by Vaibhav

  We are trying to put together a box with dual LAN cards (let's say Outer and Inner), where the Inner LAN card is supposed to act as a default gateway on the network it is connected to. This box is running Ubuntu. The basic purpose for this box is to take messages generated on the inner network, do some work with them and forward them out the Outer LAN card to a server. The inner network is completely isolated with simply a regular switch connecting the Inner LAN Card with two other boxes. These other boxes either throw out multi-cast messages (which the Inner LAN Card is listening to), or send out unicast messages meant for the server which is not on this inner network. So, we need the Inner LAN Card to act as a default gateway, where these unicast messages will then be sent, and the code on the dual-LAN Card box can then intercept and forward these messages to the server. Question: 1. How do we setup the LAN Card to be default gateway (does it need some configuration on Ubuntu)? 2. Once we have this setup, is it a simple matter of listening to the interface to intercept the incoming messages? Any help (pointers in the right direction) is appreciated. Thanks.

  Read the article

• Wireless is not currently enabled

  - by ikartik90

  I have a HP Pavilion TX2000 tablet PC with me with windows 7 OS running on it. I used to access the Internet using my D-Link DIR 615 wireless adapter on the tablet and it used to work quite fine until one day, when I hibernated my Windows 7, the wireless went off and the problem seems to persist even after my hard efforts to clear it. I checked if the router works fine, and yes it did as my iPod was still catching wireless signals on the other hand, when I checked mu device manager, I realized that I now had no wireless driver. I checked on HP's website for one, but ironically even they didn't have wireless drivers meant for my tablet for Windows 7. Please help me find a solution to this problem. Further queries will be entertained as frequently as possible. Thanks.

  Read the article

• Slow network file transfer (under 20KB/s) on newly built x64 Win7

  - by Mangoshake

  I am getting <20KB/s for local network file transfer. If I transfer a very small file (less than 100KB) it would start quickly then slow down to <20KB/s. all subsequently network file transfer would be slow, a reboot is needed to reset this. If I transfer a large file it would be stuck on calculating for a long time and then begin with <20KB/s immediately. This is a newly built desktop running Windows 7 x64 SP1. Realtek gigabit LAN from the motherboard (ASRock Extreme3 gen3). Problematic speed is observed on the private LAN, both through ethernet and WiFi. The Router is D-Link DIR-655. Remote Differential Compression is off. Drivers are up-to-date from ASRock's website. I have tested network file transfer to and from another Windows 7 laptop and a MacBook Pro, so I am fairly certain it is the desktop's problem. The slow speed only happens with one direction also, outbound from the desktop, regardless of whether I initiate the file transfer action from the origin or the destination. Inbound network file transfer and internet speeds are fine, so I don't think this is a hardware issue. I am getting 74.8MB/s internet upload speed from speedtest.net (http://www.speedtest.net/result/1852752479.png). Inbound network file transfer I can get around 10-15MB/s. I am hoping this community has some insight for me to troubleshoot this. I don't see anything obviously related from the Event Viewer, and beyond that I just don't know where else to look. Any suggestions are greatly appreciated, thank you in advance.

  Read the article

• wireless network with cable modem and access point

  - by hayri

  I have a Scientific Atlanta EPC2203 cable modem and a TP-Link TL-WA500G access point. When I connect my computer directly to modem with a CAT5e cable I have internet connection on my laptop (when i type ipconfig i see my external ip there, provided by isp). So I decided to have wireless network in the flat, allowing other devices to connect as well. I bought this wireless ap (TL-WA500G) configured Wireless security stuff, and connected it to my modem. With that configuration (by default AP has static ip of 192.168.1.254) only my computer can connect to internet over wifi, but not any other device. When I set the IP of AP to Dynamic IP (DHCP) it is the same. How should I change my configuration to enable all wifi devices to connect to internet?

  Read the article

• server and user directly connected no pinging...

  - by jtzero

  I have a server(fedora 12) with two nics on it, directly connected to say 192.168.1.0 and 192.168.2.0 the route table looks like this Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 192.168.1.1 255.255.255.0 U 0 0 0 eth0 192.168.2.0 * 255.255.255.0 U 0 0 0 eth1 eth0 = 192.168.1.15 eth1 = 192.168.2.1 and a directly connected user (Mythdora) on the 192.168.2.0 network with ip 192.168.2.2 and route table like so Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 * 255.255.255.0 U 0 0 0 eth0 the cable is a crossover and it works all three nics work -- connected my laptop to either end and assign it a valid 192.168.2.0 ip the pings will work. In fact if I disconnect the server side and plug the eth cable into the laptop and have thte box ping the laptop continually remove the eth cable and plug it back into the server both sides ping... unfortunately the box realizing it's connected to a different pc wipes its route table after say ten minutes or so. if I do a trace route from a box on the 1.0 network to the servers 192.168.2.1 interface never get a reply from it. as a note at one point I could ping the server from the 192.168.2.2 box but the server couldnt ping the 192.168.2.2 box.

  Read the article

• Long access time for static web page on virtual machine

  - by Karol

  My setup Windows 7 on workstation that I use at work (with domain) and home (no domain) Virtual machine (VMWare) that runs Arch Linux (I will call it just "Linux") with network interface in bridged mode. Linux serves web pages with Nginx. IP address of Linux machine is 192.168.0.16 and is added to C:\windows\system32\drivers\etc\hosts: 192.168.0.16 bridged bri IP address of Windows workstation is added to /etc/hosts: 192.168.0.10 workstation I can add more details to my setup description (I am not sure what is relevant). The question Often (but not always) it takes long time for a web browser (Firefox) to open static web page served by Linux. I am sure it is not a performance issue. To be more specific: it takes about ~20 seconds to resolve(?) the address http://bridged for a web browser. Additionally I have just installed samba service and noticed similar problem, so it is not specific to browser & http. Initial access for samba shares also takes long time.

  Read the article

• Two Routers - 1 Port Straight to First Router

  - by apples

  At my house we have two Wifi routers one's connected directly to the modem and the other is plugged in down stairs as a second network(Directly connected to the first router) Is there a way that I could make it so that I have the second router have its own network, but have one or two ports that would act as if they were directly connected to the first router? That way I can port forward to devices on the second router. Here are the information about the routers: Router 1 - Linksys WRT54G Running stock firmware Router 2 - Linksys E900 Running Tomato Firmware So to summarize what I'm asking is how would I have two networks from two routers but be able to connect directly to the first router through one of the ports on the second router. Here's a Visio Drawing of what I would like to look like

  Read the article

• cisco ePC 3208 router and captive portal

  - by Dejan Milosevic

  Ok, i have cisco ePC 3208 router, and cable internet goes in router via cable and router is emiting wireless. It can work without computer and it is working fine. Now i want to have capiteve portal with home page for my buisness and user logins. Is it possible that i use computer as gateway for captive portal, so when user goes to wireless it will redirected to computer local server for authorization and then passed by if user and pass is good, or i need another router or wifi acess point?

  Read the article

• My NetGear router suddenly started showing limited access for all wifi connected laptops

  - by Yasser

  I have netgear n300 router which I had installed about 6 months back. Here is how the setup is, I have a local internet provider by the name of "Hathway" they have this modem which is in turn connected to the router and a wire from router is connected to my desktop. As shown in this pic below, except for the laptop I use a desktop rest all the connection is same So with this connection and the below configuration, every thing worked fine. The desktop would work also all my laptops and mobile devices would connect and be able to access the internet without any problem. Now suddenly since yesterday (with no changes made whatsoever to this config) all my laptops start showing the limited connection message and cannot connect to the internet. However the desktop which is connected can access the internet. Can someone please guide me on this.

  Read the article

• Set default wireless adapter

  - by Evan Kroske

  I just acquired a Wi-Fire long-range wi-fi adapter, and I would like to test it with my Ubuntu desktop computer. However, my machine defaults to using a built-in wireless card. How can I set my new wireless adapter as the default wireless connection? How can I disable my internal wireless card (without opening my computer case)?

  Read the article

• File sharing from a cable connected pc to wifi connected laptop (windows 7 ultimate)

  - by Aiden Jones

  I have a one desktop running windows 7 ultimate connected to Ethernet cable. And I want to share folder to another wifi connected laptop (also windows 7 ultimate). Both machines are on the same home internet connection. I have tried to share folders by going to properties sharing advanced sharing permissions checked all the boxes to allow all but I don’t see any shared files on my laptop. I know it’s possible to share folders between two Wi-Fi connected machines but how can it be done when one pc is cable connected and other is Wi-Fi connected on the same internet connection.

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >