Search Results

Search found 5389 results on 216 pages for 'bridge router'.

Page 170/216 | < Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >

• Is there a way to make scp run faster on a Mac OS X?

  - by paul_sns

  I'm trying to a upload a Flex generated SWF file from my Macbook (running Snow Leopard) using the command scp main.swf server.com:/ I had setup key authentication to prevent typing the user/pass every time. This process normally takes up to two minutes using my connection at home (768kbps down/300+ kbps up). The interesting part is that when I use WinSCP in my Windows XP machine, the process only takes 30 seconds max. Both my MacBook and Windows XP machine use the same internet connection. The MacBook is connected to the router via cable (which should be faster right?) while the Windows XP connects through Wifi. Let me know if you need additional information in order to diagnose the problem. Thanks!

  Read the article

• How to enable RDP to a Server 2008 R2 on another network? VM network

  - by Saariko

  I have a W2008 R2 installed on a different network (I am on 192.168.0.x - new server on 192.168.3.x) I had trouble ping and RDP to it. I disabled the firewall to test the connection: and that opened the ping feature but I still can not RDP to that machine. the allow remote access is enabled As per sinni80 idea - Here is the error message The networks are divided by a Fortigate 60-B router - 2ndy interface for the gateway is 192.168.3.254 (and pingable from all) any to any rule on both networks is in place. As per Joe Schmoe idea - I am able to RDP to 192.168.3.1 from 192.168.3.3 (which is on the same network) Data to add: - The servers are on a VM host, each of the servers has 2 nics one is DHCP enabled into the 192.168.0.x network 2nd is static IP in the 192.168.3.x -- Further information: The network 192.168.0.x - are on a domain network (active Directory) The network 192.168.3.x - are grouped in a workgroup What should I check more please?

  Read the article

• Why is my iPhone WIFI so slow at home?

  - by John Fouhy

  When my iPhone is connected to my home wireless network, the internet is unusably slow. I installed the speedtest.net application; here are some results from tonight: Down: 0.0kB/s, Up: 0.0kB/s, ping: 2230ms Down: 2.5kB/s, Up: 40.5kB/s, ping: 2182ms Down: 0.0kB/s, Up: 20.0kB/s, ping: 197ms For comparison, here is the result from my iMac to the same server, which is on the same wireless network (and has no wired connection): Down: 139kB/s, Up: 53.8kB/s, ping: 182ms Neither my iMac nor the Dell laptop also on the network have experienced the wifi problems I get with my iPhone. On the other hand, I tried browsing a website on the wireless network at work with no problems. EDIT: SpeedTest at work gives me 156kB/s down. EDIT2: Girlfriend (owner of the Dell) reports actually the internet is sometimes very slow. Perhaps there is more going on. No problems with my iMac. My router is a ASUS WL-500g Premium V2 running OpenWrt Kamikaze with X-Wrt Extensions 8.09.

  Read the article

• Is there a free tool/package that can monitor web traffic and display URLS accessed? [closed]

  - by Anthony

  I couldn't find a similar question but then maybe I am searching for the wrong terms. A few years ago I used a router like device, I'm pretty sure it was a SonicWall, that did this on a clients site. Basically all traffic would be routed through this device and it allowed the manager/administrator to inspect web usage of the workers, determine how often certain resources were accessed and block them if necessary (much like content filter). It showed reports based on domain name reached etc. Facebbok.com, Bebo.com and so on. It also displayed the usual IP traffic information etc. it was a UTM also. I have tried Endian firewall, with it's NTOP install, but I don't think that will show URLs browsed. Maybe I just haven't found it in NTOP yet? I need this to troubleshoot connection and traffic issue at my home, with about twenty devices/users so didn't want to buy a dedicated solution and have spare hardware to use a community product.

  Read the article

• How can I run a game server on a computer behind a NAT, if I have another computer not behind a NAT?

  - by Macha

  My home connection is part of a large NAT, outside my control. Inside my home, my router has a NAT, under my control. I control a public facing Linux VPS with one IP address, outside my home network. Ideally, what I'd like to do is set something up so that I connect my home computer to my VPS, and after that port X on my VPS leads to port Y on my home computer, for the purposes of running a game server of a game that does not run under Linux. Is this possible?

  Read the article

• NAT Error Message - Usage limit exceeded

  - by Kato

  Trying to configure a port to use for Vuze. Using the NAT/server port test, I was getting a message saying the connection timed out, the port was probably closed. I went back and made sure to open the specific port on my router, firewall, etc, but now I'm getting "NAT Error - Usage limit exceeded (173.32.41.24:0). I'm on a mac pro running leopard, trial versions of intego netbarrier and virusbarrier. Network utilities and netbarrier both claim the port is open. I've tested a bunch of other ports, but all give the same message.

  Read the article

• Cisco Catalyst 3550 + Alteon 184 Load-Balancing Issues

  - by upkels

  I have just deployed a couple Cisco Catalyst 3550 switches, and a couple Alteon 184 Web Switches for load-balancing. I can ping all RIPs and VIPs to/from the Alteon. Topology Before: (server) <- (Alteon) <- (Internet) Topology Now: (server) <- (3550) <- Alteon <- (Internet) Cisco Port Configuration (Alteon Uplink Port): description LB_1_PORT_9_PRIMARY switchport access vlan 10 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 9 Configuration (VLAN 10 WAN): >> Main# /c/port 9/cur Current Port 9 configuration: enabled pref fast, backup gig, PVID 10, BW Contract 1024 name UPLINK >> Main# /c/port 9/fast/cur Current Port 9 Fast link configuration: speed 100, mode full duplex, fctl none, auto off Cisco Configuration (Load-Balanced Servers Port): description LB_1_PORT_1_PRIMARY switchport access vlan 30 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 1 Configuration (VLAN 30 LOAD-BALANCED LAN): >> Main# /c/port 1/cur Current Port 1 configuration: enabled pref fast, backup gig, PVID 30, BW Contract 1024 name LB_PORT_1 >> Main# /c/port 1/fast/cur Current Port 1 Fast link configuration: speed 100, mode full duplex, fctl both, auto on Each of my servers are on vlan 10 and 30, properly communicating. I have tried to turn on VLAN tagging on the Alteon, however it seems to cause all communications to stop working. When I tcpdump -i vlan30 on any of the webservers, I see normal ARP communications, and some STP communications, which may or may not be part of the problem: ... 15:00:51.035882 STP 802.1d, Config, Flags [none], bridge-id 801e.00:11:5c:62:fe:80.8041, length 42 15:00:51.493154 IP 10.1.1.254.33923 > 10.1.1.1.http: Flags [S], seq 707324510, win 8760, options [mss 1460], length 0 15:00:51.493336 IP 10.1.1.1.http > 10.1.1.254.33923: Flags [S.], seq 3981707623, ack 707324511, win 65535, options [mss 1460], len gth 0 15:00:51.493778 ARP, Request who-has 10.1.3.1 tell 10.1.3.254, length 46 etc... I'm not sure if I've provided enough information, so please let me know if any more is necessary. Thank you!

  Read the article

• Ubuntu server loses network connection after ADSL2+ modem reset

  - by squashbuff

  I am using an ubuntu 10.04 server (running on a Lenovo Thinkpad notebook) as my webserver. It is performing well in terms of handling the traffic etc. However my internet connection is ADSL2+ (using Thomson TG782T modem-router) and if the modem is reset, then my server loses network connection. The networkmanager icon shows a red exclamation mark showing that is has no connection. But as soon as I click on it and tell it to connect to eth0, the connection is back on. It must be something that networkmanager is failing to do and because of this, the reliability of my webserver is suffering. Any advice on how this can be fixed?

  Read the article

• Are VLANs necessary for my environment?

  - by kleefaj

  Greetings. I'm the new network manager for a school. I've inherited an environment made up of several Windows servers, about 100 Windows clients, ten printers, one Cisco router, six Cisco switches, and 1 HP switch. Also, we're using VoIP. There are four floors in our building. The hosts on each floor are assigned to a separate VLAN. An office on the first floor has its own VLAN. All the switches are on their own VLAN. The IP phones are on their own VLAN. And the servers are on their own VLAN. For the number of hosts on the network, are all these VLANs really buying me anything? I'm new to the VLAN concept but it seems overly complicated for this environment. Or it's genius and I just don't get it. Any thoughts? Thanks, Jeff

  Read the article

• How to get Apache web server to run on other computers?

  - by Eric

  I have been using Apache Web Server for a while now and one thing I have noticed is that outside of my computer I can not access it. I use my Apache server for PHP development on my computer, but I would like to access stuff I have made outside of my computer. I am on a linksys router network. I usually run it of http://localhost/ or http://127.0.0.1/. I IPCONFIGED my computer and got 192.168.1.105 so I went there with my browser and got the page just fine. I tried doing this on another computer on the same network but it didn't work. How do I fix this? Sorry about the bad wording. I am in ah hurry Information you might need to know: Server: Apache 2.2 Operating System: Windows 7 ULTIMATE

  Read the article

• IPv6 in a Small Business

  - by Martyn

  I’ve been tasked to identify a new server and IT equipment for the company I work for (employees <20). I’m looking at getting a SBS 2011 Standard box. My Question is: Apart from ensuring that our router is IPv6 compliant, is there anything else I need to do/investigate to ensure that we won’t have IPv6 related problems in the future? When investigating this I can only find references to DNS Mangers etc. The SBS 2011 box will be used for exchange and remote log in access – it won’t be hosting any websites. Also will VOIP phone systems be affected by IPv6? (We are running a rather old VOIP system, would that need to be updated?

  Read the article

• PC -> TV HDMI suddenly doesn't work, any other option does

  - by XSlicer

  So my parents wanted to connect their PC to their TV, so they bought a 10m (35 ft) cable. It all worked perfectly. Then my mom tripped over the cable, breaking it. She somehow got a free replacement, but at the same time some more expensive one from an uncle. Now the problem is that this suddenly doesn't work anymore (TV saying "Format not supported"). I've tried several other things to pinpoint the actual problem, but none brought me something conslusive: PC (hdmi) to TV doesn't work (both cables) PC (hdmi) to TV doesn't work (short cable) Laptop (hdmi) to TV work (same cables) BluRay (hdmi) to TV works (same cables) PC (hdmi) to monitor works (same cables) PC (DVI w/ adapter HDMI) to TV works (same cables) I've tried different ports, tried Linux, reinstalling drivers (the graphics card is internal using an i5 sandy bridge. Normally it's running Windows 7 Home Prem, the TV being a Philips 37PFL7605H). So basically, everything works, except that thing what we want. The only things I am thinking of is that the sound is interfering or that the HDMI-output is somehow broken. Or is it anything else? I'm kind of lost.

  Read the article

• Cannot access internet or remote network after connecting to Windows VPN

  - by Kiewic

  I set up a VPN by creating an incoming VPN connection (VPN server) in my Windows 8 machine at home (not a Windows Server). I forwarded the PPTP port in my router (port 1723) to this machine and enabled PPTP passthrough. In a second Windows 8 machine out of home, I created an outgoing VPN connection (VPN client). And I am able to connect to my home VPN, but I don't have access to any home resource or even internet. This is the output of the client ipconfig: And this are the settings of my VPN server: UPDATE: My VPN server has assigned the 192.168.1.144 IP adress at my home network. So, I tried setting the "IP address assignment" range from 192.168.1.150 to 192.168.1.200. And when a VPN client gets connected, it gets an address in that range, but it doesn't make any difference.

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• Cisco ASA - NAT'ing VPN traffic

  - by DrStalker

  I have an IPsec VPN setup like this: [Remote users]-[Remote ASA] <-VPN-> [My ASA]-[Subnet A]-[Router 2]-[Subnet B] The VPN is set to handle traffic between [remote users] and [Subnet A]; it does not include [Subnet B]. Pretend the firewall rules for all routers are to permit everything. Now I want to redirect traffic that comes over the VPN to a specific IP on [subnet A] (192.168.1.102) to an IP on [Subnet B] (10.1.1.133) If I add a rule on [My ASA] to NAT traffic to original IP 192.168.1.102 to new IP 10.1.1.133, 1) Will this affect the connections coming in over the VPN? (ie: the VPN packets are unencrypted and then NAT is applied) 2) Will this work when the post-NAT target is on Subnet-B, which is not part of the VPN traffic selection?

  Read the article

• block access to wrt from vlan using iptables dd-wrt

  - by NitroxDM

  I set up multiple isolated vlans in dd-wrt. Now I need to forward a port to vlan2. I isolated the vlans using: iptables -I FORWARD -i br0 -o vlan2 -j DROP iptables -I FORWARD -i br0 -o vlan3 -j DROP iptables -I FORWARD -i br0 -o vlan4 -j DROP Now I need to block a clients on each vlan from accessing the router. This doesn't work: iptables -I INPUT -i br0 -o vlan2 --dport telnet -j REJECT --reject-with tcp-reset I'm new it iptables... am I missing something?

  Read the article

• How do I stop linux from trying to mount android phone as usb storage?

  - by user1160711

  When I plug in my Motorola Triumph to my fedora 17 linux box USB port, I get an endless series of errors on the linux box as it desperately attempts to mount the phone as a USB drive. Stuff like this: Jun 23 10:26:00 zooty kernel: [528926.714884] end_request: critical target error, dev sdg, sector 4 Jun 23 10:26:00 zooty kernel: [528926.715865] sd 16:0:0:1: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 23 10:26:00 zooty kernel: [528926.715869] sd 16:0:0:1: [sdg] Sense Key : Illegal Request [current] Jun 23 10:26:00 zooty kernel: [528926.715872] sd 16:0:0:1: [sdg] Add. Sense: Invalid field in cdb Jun 23 10:26:00 zooty kernel: [528926.715876] sd 16:0:0:1: [sdg] CDB: Read(10): 28 20 00 00 00 00 00 00 04 00 If I go ahead and tell the phone to allow linux to mount the USB storage, the messages stop, and I get a mounted drive, but if all I want to do is use the debug bridge, my log on linux will continue to fill with this junk. Is there some udev magic I can do to make the system ignore this particular device as far as usb storage goes? I just noticed that if I tell the phone to enable USB storage, let linux recognize the new disk, then tell the phone to disable USB storage again, I get one additional log message about capacity changing to zero, but the endless spew of messages stops, so I guess one work around is to enable and disable USB right away.

  Read the article

• which vista services can be disabled with impunity?

  - by GwenKillerby

  I use Vista on a HP pavilion DV2 laptop. When I look through all the services my laptop starts, it really seems there's way too much of it. I multi boot with XP and 7. Both startup in 40 seconds. Vista takes four minutes. Is there some software that can determine which services I don't need? On 7, there's no propietary HP stuff at all, yet it seems to run fine. Because all these service, there's a LOT of them and some just sit there doing nothing, monitoring for updates I don't really need or want or need to know about the second they're available. my laptop is the only computer i use at home, there's no home network, aside from the modem-router, which is cabled, not wifi. Take for instance Parental controls, and stuff for people with bad eyesight, Tablet PC. I really never use any of that stuff. Hope this question is specific enough. thanks, Gwen.

  Read the article

• why this routing configuration does not work?

  - by avs099

  I have 2 VMs in HyperV role: first is RRAS - it has 2 interfaces (both manually configured, no DHCP): 192.168.1.110 - "external" one, connected to the router 192.168.10.2 - that's internal interface which other VMs will be using as well also I added VPN connection to our main server - and it gets 192.168.2.136 IP address in 192.168.2.XXX network. And IP route is create on the server as well for this interface. second VM is called KITCHENER. It only has 1 interface 192.168.10.99 / 255.255.255.0, with default gateway set to RRAS server - 192.168.10.2 QUESTION: how can I ping "main server" - 192.168.2.1 - from the KITCHENER server when RRAS server is connected to VPN? please see screenshots with ipconfig /all, route print and ping 192.168.2.1 commands. What needs to be done to get this working? all servers are Windows 2008 R2 if that matters.

  Read the article

• Own hosting, own domain on Virtualbox Ubuntu server - dynamic IP

  - by Pawel

  Hi, I have bought my TLD domain, say domain.com. What I'd like to do is to host the website available under this address on my own computer. I'm assigned a dynamic IP, and I'm also behind a router in my local network. I'd run sites on my ubuntu server on a virtualbox machine which is available in my local network. Preferably, I'd like to have my own domain on some server, with which I could experiment as much as I need (so it's only for educational purposes), but I can't afford to buy such a service. Is it feasible? Can you provide steps I'd need to take to configure it (could be just general explanation). I'd need some guidance, please.

  Read the article

• Cisco IOS ACL: Don't permit incoming connections just because they are from port 80

  - by cjavapro

  I am going much based on my memory and I may not be correct on all of this. On a Cisco 851 (IOS) that uses a BVI or a bridge-route (the servers on the inside are configured with static and public IP addresses). I would apply two access lists (both end with deny ip any any log) on FastEthernet4 (the WAN port). There would be one for FA4 in and another for FA4 out. FA4 out would have a line like access-list 110 permit 98.76.54.0 0.0.0.255 gt 1023 any eq http I think this means from 98.76.54.* with a from port of at least 1024 can connect to any other machine with a destination port 80. So, then I have to allow the response to the HTTP connection. FA4 in would have a line like access-list 120 permit any eq http 98.76.54.0 0.0.0.255 gt 1023 Now the problem with that is that anybody on the outside can set their from port to port 80 and then connect to any inside port that is at least 1024. How do we prevent this and require the incoming data to be a response to the outgoing data.

  Read the article

• Wireless dropouts that only affect subset of devices

  - by jwaddell

  When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

  Read the article

• Airpot Express configuration

  - by Christina

  We are trying to set up remote access to a computer that houses a server fro a particular program we are running. The program says we need to configure the office router. In the firewall settings it says to open ports 5345-5351 (TCP only). Port Forwarding: You will also need to forward the same range of ports (5345-5351) to the computer running the Server. This typically requires that the computer running the Server be assigned a static IP on the local network. Having trouble figuring out which IP address we actually need to be using on the client side of this program in order to access the server computer. Can someone walk through this process?? We are working on Mac OSX 10.5. Thank you in advance!

  Read the article

• external drive and CentOS - Reset high speed USB device number

  - by Phil

  I have 2 external drives (3TB) and both will not work with my centOS Box. Tested them in windows ( different machine ) No problems ( 2.6.32-279.9.1.el6.i686 ) dmesg reports: usb 2-2: new high speed USB device number 3 using ehci_hcd usb 2-2: New USB device found, idVendor=2109, idProduct=0700 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: USB 3.0 SATA Bridge usb 2-2: Manufacturer: VIA Labs, Inc. usb 2-2: SerialNumber: 0000000000006121 usb 2-2: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access ST3000DM 001-9YN166 CC4B PQ: 0 ANSI: 2 sd 6:0:0:0: Attached scsi generic sg3 type 0 sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] 5860533165 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 6:0:0:0: [sdd] Write Protect is off sd 6:0:0:0: [sdd] Mode Sense: 00 06 00 00 sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] Assuming drive cache: write through sdd: sdd1 sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] Attached SCSI disk Tyring to use cfdisk / fdisk / gdisk or even fdisk -l results in the program hanging and dmesg reports: usb 2-2: reset high speed USB device number 3 using ehci_hcd usb 2-2: reset high speed USB device number 3 using ehci_hcd usb 2-2: reset high speed USB device number 3 using ehci_hcd I have the same 2 drives physically installed in the computer via SATA Any Ideas?

  Read the article

• Poor quality when trying to stream a 720p video to XBox 360 using Media Center Extender

  - by MBraedley

  I have my XBox 360 set up as a Media Center Extender for my Windows 7 desktop. SD quality avi videos stream fine to my XBox, either though the video library or through Media Center Extender, but when I try a 720p mkv file, the frame rate plummets and the A/V sync is completely lost. I don't want to transcode or switch container formats (mkv isn't supported by the 360), but still want to stream. Both my desktop and 360 are plugged into the same gigabit switch, which is plugged into my ISP supplied modem/router. The video plays fine on my machine in a number of programs. Considering that I should have more than enough bandwidth to accommodate this video, why won't it play back properly?

  Read the article

< Previous Page | 166 167 168 169 170 171 172 173 174 175 176 177  | Next Page >