Search Results

Search found 7463 results on 299 pages for 'personal computers'.

Page 171/299 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• Multiple vlan issue with procurve switch

  - by Chris-AZ

  I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

  Read the article

• WAN interface responds as LAN when request comes from LAN, is that correct?

  - by Eugenio Miró

  Hi Everyone! I have a problem with my router/modem. I've published an HTTP service from one of my internal computers and when I access the service from the internal lan using the external IP address the modem responds instead of redirecting the call to the forwarded port. I can access the service from outside however, but from the internal network the modem responds to my calls. I'm using a ZTE ZXDSL 831 Series modem with ZXDSL 831IIV7.5.1e_E09_BR1 firmware. Thanks in advance!

  Read the article

• Remote Desktop, Host: 2008, Client: Windows 7, The remote computer requires Network Level Authentica

  - by deerchao

  Hi, today I accidently changed one option of Teminal Services, I checked "Allow connections only from computers running Remote Desktop with Network Level Authentication". After that, I can't connect to my server any more. The error says: The remote computer requires Network Level Authentication, which your computer does not support. But my client pcs(both home and at office) are running Windows 7, as far as I know, it shoud support NLA; And in About dialog of Remote Desktop Connection there says "Supports Network Level Authentication". My server is running Windows Server 2008, placed in IDC center; I could connect to it before I change the settings. All other sevices(like IIS, SQL Server) are running normally. For clients, I tried two PCs running Windows 7, and two virtual windows XP machine running in Virtual PC and Virtual Box, all of them gives the same error message. Is there a way I can make things right without go to IDC which is far away? Thanks.

  Read the article

• Poor home office network performance and cannot figure out where the issue is

  - by Jeff Willener

  This is the most bizarre issue. I have worked with small to mid size networks for quite a long time and can say I'm comfortable connecting hardware. Where you will start to lose me is with managed switches and firewalls. To start, let me describe my network (sigh, shouldn't but I MUST solve this). 1) Comcast Cable Internet 2) Motorola SURFboard eXtreme Cable Modem. a) Model: SB6120 b) DOCSIS 3.0 and 2.0 support c) IPv4 and IPv6 support 3-A) Cisco Small Business RV220W Wireless N Firewall a) Latest firmware b) Model: RV220W-A-K9-NA c) WAN Port to Modem (2) d) vlan 1: work e) vlan 2: everything else. 3-B) D-Link DIR-615 Draft 802.11 N Wireless Router a) Latest firmware b) WAN Port to Modem (2) 4) Servers connected directly to firewall a) If firewall 3-A, then vlan 1 b) CAT5e patch cables c) Dell PowerEdge 1400SC w/ 10/100 integrated NIC (Domain Controller, DNS, former DHCP) d) Dell PowerEdge 400SC w/ 10/100/1000 integrated NIC (VMWare Server) 4) Linksys EZXS88W unmanaged Workgroup 10/100 Switch a) If firewall 3-A, then vlan 2 b) 25' CAT5e patch cable to firewall (3-A or 3-B) c) Connects xBox 360, Blu-Ray player, PC at TV 5) Office equipment connected directly to firewall a) If firewall 3-A, then vlan 1 b) ~80' CAT6 or CAT5e patch cable to firewall (3-A or 3-B) c) Connects 1) Dell Latitude laptop 10/100/1000 2) Dell Inspiron laptop 10/100 3) Dell Workstation 10/100/1000 (Pristine host, VMWare Workstation 7.x with many bridged VM's) 4) Brother Laser Printer 10/100 5) Epson All-In-One Workforce 310 10/100 5-A) NetGear FS116 unmanaged 10/100 switch a) I've had this switch for a long time and never had issues. 5-B) NetGear GS108 unmanaged 10/100/1000 switch a) Bought new for this issue and returned. 5-C) Linksys SE2500 unmanaged 10/100/1000 switch a) Bought new for this issue and returned. 5-D) TP-Link TL-SG10008D unmanaged 10/100/1000 a) Bought new for this issue and still have. 6) VLan 1 Wireless Connections (on same subnet if 3-B) a) Any of those at 5c b) HP Laptop 7) VLan 2 Wireless Connection (on same subnet if 3-B) a) IPad, IPod b) Compaq Laptop c) Epson Wireless Printer Shew, without hosting a diagram I hope that paints a good picture. The Issue The breakdown here is at item 5. No matter what I do I cannot have a switch at 5 and have to run everything wireless regardless of router. Issues related to using a switch (point 5 above) SpeedTest is good. Poor throughput to other devices if can communicate at all. Usually cannot ping other devices even on the same switch although, when able, ping times are good. Eventual lose of connectivity and can "sometimes" be restored by unplugging everything for several days, not minutes or hours but we're talking a week if at all. Directly connect to computer gives good internet connection however throughput to other devices connected to firewall is at best horrible. Yet printing doesn't seem to be an issue as long as they are connected via wireless. I have to force the RV220W to 1000Mb on the respective port if using a Gig Switch Issues related to using wireless in place of a switch (point 5 above) Poor throughput to other devices if can communicate. SpeedTest is good. Bottom line Internet speeds are awesome. By the way, Comcast went WAY above and beyond to make sure it was not them. They rewired EVERYTHING which did solve internet drops. Computer to computer connections are garbage Cannot get switch at 5 to work, yet other at 4 has never had an issue. Direct connection, bypass switch, is good for DHCP and internet. DNS must be on server, not firewall. Cisco insists its my switches but as you can see I have used four and two different cables with the same result. My gut feeling is something is happening with routing. But I'm not smart enough to know that answer. I run a lot of VM's at 5-c-3, could that cause it? What's different compared to my previous house is I have introduced Gigabit hardware (firewall/switches/computers). Some of my computers might have IPv6 turned on if I haven't turned it off already. I'm truly at a loss and hope anyone has some crazy idea how to solve this. Bottom line, I need a switch in my office behind the firewall. I've changed everything. The real crux is I will find a working solution and, again, after days it will stop working. So this means I cannot isolate if its a computer since I have to use them. Oh and a solution is not throwing more money at this. I'm well into $1k already. Yah, lame.

  Read the article

• Can't play stream from TorrentFlux stream

  - by thegreyspot

  Hi I am trying to stream a video from my TorrentFlux-b4rt server. I tried multiple media players, none work. Only VLC was able to produce an error message: input can't be opened: VLC is unable to open the MRL 'mms://...:8080/'. Check the log for details. I have tried multiple computers on different networks and all have the same issue. I am using Windows 7 to play the videos, and the server is Torrentflux-b4rt 1.0-beta2 with ubuntu 9.10. Thank you.

  Read the article

• SQL Server 2008 Express - "Best" backup solution?

  - by Alexander Nyquist

  Hi! What backup solutions would you recommend when using SQL Server 2008 express? I'm pretty new to SQL Server, but as I'm coming from an MySql background i thought of setting up replication on another computer and just take x-copy backups of that server. But unfortanetly replication is not available in the express edition. The site is heavily accessed, so there has to be no delays och downtime. I'm also thinking of doing a backup twice a day or something. What would you recommend? I have multiple computers I can use, but don't know if that helps me since i'm using the express version. Thanks

  Read the article

• Security permissions for remote shared folders

  - by Tomas Lycken

  I have two servers running Windows Server 2003, and I want copy files from one server (A), programmatically with a windows service running under the Local System account, to a shared folder on the other (B). I keep getting "access denied" errors, and I can't figure out what security settings I need to set to open the shared folder for writing. This is what I've done on the recieving end: On A, right-click on the folder to share, choose the tab "Sharing" and select "Share this folder". Set a share name. Click "Permissions", add the group "Everyone" and give it full control. I tried choosing the "Security" tab to give some permissions there as well, but the "Add" dialog only finds local users, despite the fact that B shows up in the "Workgroup computers" dialog. After further inspection, this is the case also for the "Permissions" dialog under the "Sharing" tab (are they the same?).

  Read the article

• how to properly enable drag-and-drop in Windows 7 (with iTunes in particular)

  - by user38795

  On two computers with Windows 7 at work and at home with the same version of iTunes (10.1.0.56) at work I can drag-and-drop files into iPod, and I can not at home. At home only adding them first through a dialog box to a Library and only after that drag-and-dropping into iPod (or iPad) works. Initially I thought the problem is in iTunes, but looks like it's the same version, so most likely it's the Windows 7 config parameters. It's 64-bit W7, and I have admin privileges in both cases. The only difference I could think of is it's an enterprise version at work and ultimate at home. What should I change at home to enable that drag-and-drop-ing files into the application?

  Read the article

• Deployment of SQL compact Edition (SDF files) using Setup project

  - by Emad

  Hi, I have a C#.NET desktop application using SQL Compact edition as data store. The application should be used by any user on the machine and all should be seeing the same data ( data should not different per user). I am wondering where should I deploy the SDF file? User's Personal data folder (My Documents) means each user will have a separate database. Deploying on the same folder as the application causes vista to copy the file to \USers\Appdata\local\VirtualStore\ and it seems to make different copies for each user. Where is it best to deploy the SDF file to ensure all users are looking at the same data?

  Read the article

• change default username when ssh to another pc

  - by Tom

  When I ssh between different pcs I can omit my username (tom) and just type ssh pc_name instead of ssh tom@pc_name I like this feature, and have got into the habit of using it. Unfortunately, on one of my computers I went for the user name tommy. Everytime I connect to this computer I forget to write tommy@creative_pc and wonder why my password doesn't work. Is there a way to tell ssh what user name to use when the username is omitted? Edit: Just found the following question that is similar: How to make ssh log in as the right user? It didn't come up on my initial search.

  Read the article

• Remote Desktop closes with Fatal Error (Error Code: 5)

  - by Swinders

  We have one PC (Windows XP SP3) that we can not log onto using a Remote Desktop session. Logging on to the PC directly (sitting in front of it using the connected keyboard and monitor) work fine. From a second PC (tried a number of different ones but all Windows XP SP3) I run 'mstsc' and type in PC name to connect to. This shows the login box which we can enter the correct login details and click OK. Within a few second we get an error: Title: Fatal Error (Error Code:5) Error: Your Remote Desktop session is about to end. This computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support. None of the computers we are using are low on memory (2Gb+) and we let windows manage the virtual memory side of things. We do not see this with any other PC and do use Remote Desktop in meeting rooms to connect to user PCs with no problems.

  Read the article

• Inexpensive Remote Assistance software?

  - by Jess

  Any recommendations for Remote Assistance software that does not require firewall modification for clients? To assist client with software problems and perform training, we currently use a tool called Remote Helpdesk to connect to their computers and guide them through the process. This tool was pretty cheap (~$400 onetime for 3 support staff), and worked great - the client's PC actually initiates the connection to us, so there's never any firewall issues (vs. Remote Desktop, VNC software, or many other similar tools). Unfortunately, the product doesn't work well with 64-bit O/S's and Vista in general (slows down by a factor of 10 or so). I am looking for alternatives that provide the same reverse connection capabilities to avoid firewall issues. The only solution I've found is WebEx's Remote Support, which is WAY too expensive ($449/month for us). Thanks for all the assistance!

  Read the article

• HP ML350G6 running hyper-V 2008 r2 resets itself every 2 hours

  - by GT

  The system started resetting itself exactly every 2 hours. These are the messages in the iLO2 log: Informational iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server power restored. Caution iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server reset. It's not an ASR reset (that would show in the log) Redundant power supplies, swapped but no change. Turned off all virtual machines (i.e. now only running hypervisor) but not OK Boot HP smartstart diagnostics disk, ALL OK Diagnostic disk reports no errors Went back to booting Hypervisor and the problem is back. Seems the hyper-V system disk has got a time based program (virus) causing the reset. I thought the hypervisor had a small attack surface and should be OK. All virtual machines (SBS2008, Win7 and Win XP) and network computers are protected with TrendMicro WFBS. I am about to rebuild the disk (I have backups) but wondered if there were any suggestions to try first???

  Read the article

• HP ML350G6 running hyper-V 2008 r2 resets itself every 2 hours

  - by GT

  The system started resetting itself exactly every 2 hours. These are the messages in the iLO2 log: Informational iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server power restored. Caution iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server reset. It's not an ASR reset (that would show in the log) Redundant power supplies, swapped but no change. Turned off all virtual machines (i.e. now only running hypervisor) but not OK Boot HP smartstart diagnostics disk, ALL OK Diagnostic disk reports no errors Went back to booting Hypervisor and the problem is back. Seems the hyper-V system disk has got a time based program (virus) causing the reset. I thought the hypervisor had a small attack surface and should be OK. All virtual machines (SBS2008, Win7 and Win XP) and network computers are protected with TrendMicro WFBS. I am about to rebuild the disk (I have backups) but wondered if there were any suggestions to try first???

  Read the article

• How To Update a Facebook App Page Status

  - by DigitalZombieKid

  Hi all, I've done a few searches and couldn't find an answer. I'm trying to update the status of my business's "Application Page" (not personal page, and not "Fan Page") on Facebook. Two questions for the community: 1) How to update the "Application Page" status programmatically? I found the answer for a "Fan Page" here (http://stackoverflow.com/questions/2097665/authorizing-a-facebook-fan-page-for-status-updates). Does anyone think it will work for an "Application Page" as well? 2) How to update the "Application Page" status through a third party service? Ideally, I'd like to post to one location and have it show up a) on my business twitter status and b) on my Facebook "Application Page" status. Has anyone heard of a company that might be able to help me do this (paid or free)? Thanks and regards, DZK

  Read the article

• Keyboard Shortcuts in Win 7 without the CTRL + ALT

  - by Carlos

  I am knew to this site and don't know if I'm doing this correctly. I've been asked to edit my original post so I deleted my original post and starting over. I don't know why it's so hard for everyone to understand what I'm trying to do. You guys are all geniuses when it comes to computers and I'm just starting out. I started out trying to use a shortcut to display the LOCAL AREA CONNECTION window on my desktop by creating a shortcut and assigning it CTRL + , (comma). Windows didn't like that so it added ALT which ended up being CTRL + ALT + ,. Since I couldn't figure out a way to eliminate ALT as part of the shortkey keys, I am now trying a different strategy and it's not working. my latest attempt is to run the following command; ^,:: Run, explorer:: {BA126ADB-2166-11D1-B1D0-00805FC1270E} Can someone please tell me what I'm doing wrong? I'm trying, just give me a chance. Thanks, Carlos

  Read the article

• Good low-cost SSL certificate providers

  - by phenry

  We need an SSL certificate to facilitate remote access and administration by a small number of employees. I don't want to have to train a bunch of non-technical users to install a self-published cert on their home computers, so I'd prefer to purchase one from a well-trusted provider. We won't be using it for any kind of e-commerce or things like that, so it seems hard to justify paying the prices demanded by some of the big-name providers. Who are some good low-cost providers to consider? What are the important differences between the offerings that are available at different price points? (And is the certificate business really as much of a racket as it seems?)

  Read the article

• Centos Virtual host loading default page

  - by ntechi

  I have asked a question which was related to this but not same, I have a centos VPS, which has two wordpress websites, one is mbas.co.in and another is onlinemba123.com, now for virtual hosting using just ONE IP ADDRESS, first I started mbas.co.in, which is working fine, when I added onlinemba123.com then, it is loading default Centos page instead of my website, and I am just testing my onlinemba123 website, I haven't configured DNS for it, I am testing it through editing my PC's hosts file, My website folder names are also same as in the conf file below Now my question is how can I load my website instead of Default page, is my virtual host config fine? My virtual host config: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/www.mbas.co.in ServerName mbas.co.in ErrorLog logs/mbas.co.in-error_log CustomLog logs/mbas.co.in-access_log common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/www.onlinemba123.com ServerName www.onlinemba123.com ErrorLog logs/onlinemba123-error_log CustomLog logs/onlinemba123-access_log common </VirtualHost> My computers host file is: xx.xxx.xxx.xxx www.onlinemba123.com

  Read the article

• Clickonce applications being allowed through firewall

  - by DanielF

  The company I work for uses an application that is deployed through clickonce. This means that everytime they update said program the program regenerates in a new location ie: C:\Users\%username%\AppData\Local\Apps\2.0\89XCT43D.10T\WBZ8WE7L.927\trm8..tion_1ad39bb503bcb5df_0008.0005_14829906c9aa8611\%appname%.exe Recently the computers were updated to windows 7 machines and now everytime an update is pushed out the windows firewall see this as a new application and prompts the users to allow the program through the firewall. THis means I have to walk around to every computer and type in admin credentials. Does anyone know of a way to allow the application regardless of the path it is in? Google has not been very helpful so far.

  Read the article

• share one vpn connection through windows rras with other clients

  - by KTYP

  I'm having a Cisco VPN connection to access our branch office. Since several people using the VPN I'm planing to install the VPN client on one of our server and share it through RRAS to save the licenses (like site - to - site). I install RRAS on a windows 2008 R2 (svrw2k8r2) and made the static routes on client computers. I could able to ping to the VPN's IP on svrw2k8r2 server but they can't seems to connect to the servers in other branch through this setup. Below is my setup My Branch Server: svrw2k8r2 - Windows 2008 R2 IP: 192.168.40.100/24 VPN IP: 10.0.100.12/8 Clients Win7 IP: 192.168.40.101 - 110 / 24 Other Branch Servers IP:10.10.0.10-20/24

  Read the article

• How do I set the Initial Directory on an OpenFileDIalog to the users `Downloads` folder in C#

  - by JMK

  Ok so I have an OpenFileDialog and I want to set the initial directory to the users 'Download' folder. This is an internal application and, therefore, I am sure that the user will be using Windows 7. var ofd = new OpenFileDialog(); //This doesn't work ofd.InitialDirectory = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.Personal), "Downloads"); //This doesn't work either ofd.InitialDirectory = @"%USERPROFILE%\Downloads"; ofd.Filter = "Zip Files|*.zip"; ofd.ShowDialog(); txtFooBar.Text = ofd.FileName; I have tried the above so far and neither work. No Exception is thrown, it just doesn't set the initial directory to the downloads folder. Where am I going wrong? Thanks

  Read the article

• Set up iis7.5 to deny connections outside of LAN for certain folder

  - by Darkcat Studios

  Im setting up a combined website and extranet currently, they both read from the same database on the same server as the site is hosted on. The reason being that the website is fed from the data that the staff plug into the extranet interface. it also links in to AD for authorising access to the extranet. I have the extranet in a folder within the website folder. What I want to do is only allow the extranet to be accessed from computers within our LAN, but allow the main website to be freely accessible to internet users. I have it set up as a generic web server currently, so anyone can view anything (well up to the point where the user is asked to log into the extranet of course! I have read a lot on this but nothing I read applies to, or works in IIS7.5

  Read the article

• Puppet - how can i copy a file to several user folders?

  - by Eliot Rocha

  Well i was using the info on this: Puppet - Any way to copy predefined custom configuration files for software on clients from the puppet master (host)? But i need some more elaborated, because i have several Desktops and are in use by 2 or 3 users each one, so i want to make a class for copy a shortcut in his desktops. The computers are joined to a domain, so any user can log in any desktop, and his profile is created in every desktop. I've tryed with this: class applink { file { "/home/installer/Escritorio/Workdesktop.desktop": owner => installer, group => root, mode => 770, source => "puppet://$server/files/Workdesktop.desktop" } This is only for one user called "installer", how can do this for several users? Can i use $USER for do this? Any Thoughts? Thank You!

  Read the article

• Mac OS X Server Open Directory does not push Software Update settings to clients

  - by joxl

  I have an Xserve G5 running Mac OS X Server 10.5.8 configured as an Open Directory master. I have also enabled and configured Software Update service on the machine. The SUS is configured to serve Tiger, Leopard and Snow Leopard clients (see http://discussions.apple.com/message.jspa?messageID=10297359#10297359) The clients bound to the OD are a variety of Mac's running OS X 10.4, 10.5 or 10.6. In Workgroup Manager, I have created 3 machine groups for each client OS. Each group is configured with a custom SUS URL, and the managed client computers are members accordingly (see http://discussions.apple.com/thread.jspa?messageID=10493154#10493154) My problem is that the server pushes the SUS settings to some of the client machines, but not all. When I first configured all this stuff on the server (a few weeks ago) I was closely monitoring a few of the client machines to confirm that they received the custom settings. I noticed that some of the clients (10.4/5/6 alike) seemed to get the settings immediately, others didn't show the new settings until after a reboot. As I said, results are mixed across OS's, but some clients will not "sync" at all. My immediate thought was to unbind/rebind the problematic machines. I did this on several client computers with no success. For example, today I was working on one of the Tiger clients. I noticed it was not pointed at my local SUS, so I checked the OD binding; it was fine. Just to be sure I unbound the machine. Next, I checked WM and confirmed the computer record was gone. I noticed the machine group still had a residual (broken?) member from the unbound client; I manually removed this. Finally, I re-bound the client to OD and re-added the machine to it's correct group in WM. Unfortunately, the client still pings apple's SUS for updates. Just to play it safe I rebooted the client, but to no avail, it will not see my local SUS. To confirm that there is nothing wrong with the server, or the client's connection to it, forcefully pointed the machine at my SUS: sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "$LOCAL_SUS_URL" and the machine successfully updated off my local server. Great, successful updates, but problem not solved. I've done exhaustive reading on discussions.apple.com (not saying I read everything, I'm just saying I have read a lot) without a good answer. The discouraging thing is that a lot of OD problems I've read about only result in the sysadmin completely reinstalling the server, or OD, or some other similarly heavy-handed operation. At this point, I am not willing to go that route. I still have hope that I can find the reason for this flaky behavior. If anyone can point me in a helpful direction it would be much appreciated. EDIT: Indeed, some files are being pushed to the client: # from client machine: $ sudo find /Library -type f -name com.apple.SoftwareUpdate.plist /Library/Managed Preferences/com.apple.SoftwareUpdate.plist /Library/Managed Preferences/username/com.apple.SoftwareUpdate.plist /Library/Preferences/com.apple.SoftwareUpdate.plist A few weeks ago, prior to my (previously mentioned) modifications, the SUS was still running "stock". Which meant it could not serve SL (10.6) machines. At that time, the Software Update settings were setup in WM under User Groups. This didn't make any sense because some users work on multiple machines with different OS's. Before creating Machine Groups in WM, I deleted all the SU settings from the User Group Preferences. This just makes the whole thing more confusing, because when I see a file here: /Library/Managed Preferences/username/com.apple.SoftwareUpdate.plist I assume it's still remaining from the "old" settings, because I wouldn't think a Machine Setting belongs there. Despite all the com.apple.SoftwareUpdate.plist hanging around under the Managed Preferences, why does the client machine still call home to Apple and not my SUS? # on client machine: $ date Tue Jan 25 17:01:46 EST 2011 $ softwareupdate --list Software Update Tool Copyright 2002-2005 Apple No new software available. switch terminals... # on server: $ tail -n1 /var/log/swupd/swupd_access_log 10.x.x.x - - [25/Jan/2011:15:54:29 -0500] XXXX POST "/cgi-bin/SoftwareUpdateServerStats" 200 13 ... Notice the date of the client softwareupdate and the latest access to the SUS server; the server never heard a peep from that client.

  Read the article

• Host name resolution on a home network

  - by Kris

  Hi, I have several machines (both virtual and physical) in my internal network at home. Currently I have to connect via 1P addresses. The one main machine I connect with to all the other machines is running Windows Vista. Is there a way I can have some sort of DNS capability inside my network as well so I can refer to these machines with a name? I think this would be a common problem in most households (running a few computers) and I think there might be some simple solutions out there. This would be something most routers should support out of the box - but why don't they? Can anyone recommend some of these or an easy way to accomplish this?

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >