Search Results

Search found 8185 results on 328 pages for 'technical tests'.

Page 171/328 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• how to find the clientname of an remote desktop session?

  - by Hemal Pandya

  We have servers on which we run tests and all users connect using the same credentials. The server allows 2 connections. What happens often is that one user is already active and the other two users keep hijacking the remaining session. Using query session, I can find out what are the active connections. But it does not list the client machine from where the session originates, which taskmanager displays. How do I get this information from a remote machine? I prefer a command line solution. Thanks in advance.

  Read the article

• How reliable is HDD SMART data?

  - by andahlst

  Based on SMART data, you can judge the health of a disk, at least that is the idea. If I, for instance, run sudo smartctl -H /dev/sda on my ArchLinux laptop, it says that the hard drive passed the self tests and that it should be "healthy" based on this. My question is how reliable this information is, or more specifically: If according to the SMART data this disk is healthy, what are the odds of the disk suddenly failing despite this? This assumes the failure is not due to some catastrophic event that impossibly could have been predicted, such as the laptop falling down on the floor causing the drive heads to hit the disk. If the SMART data does not say the disk is in good shape, what are the odds of the disk failing within some amount of time? Is it possible that there will be false positives and how common are these? Of course, I keep backups no matter what. I am mostly curious.

  Read the article

• My D-Link's Ethernet bridge downlink just got 10-30x slower?

  - by Jay Levitt

  TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

  Read the article

• Trigger ZFS dedup one-off scan/rededup

  - by Jake Wharton

  I have a ZFS filesystems which has been running for some time and I recently had the opportunity to upgrade it (finally!) to the latest ZSF version. Our data doesn't scream dedup but I firmly believe based on small tests that we could gain anywhere from 5-10% of our space back for free by utilizing it. I have enabled dedup on the filesystem and new files are slowly being dedupified but the majority (95%+) of our data already exists on the filesystem. Short of moving the data off-pool and then recopying it back, is there any way to trigger a dedup scan of existing data? It doesn't have to be asynchronous or live. (And FYI there isn't enough room on the pool to copy the entire filesystem to another and then just switch the mounts.)

  Read the article

• Which window manager do you use?

  - by Stephan202

  Combining "What is your default web browser?" and "What are the differences between Linux Window Managers", I ask you: which window manager do you use, and why? Myself I prefer a minimal window manager on the one hand (in the past I used Fluxbox), but on the other hand wish to go with the main stream, to ease finding (Googling) solutions in case of problems. Hence I stick with Gnome as it is shipped with Ubuntu. Why do you use the window manager which you use? I understand some reasons may be subjective, but please try to cite technical reasons where possible.

  Read the article

• Fluxbox startup file not working

  - by Jack

  I am placing apps into my fluxbox startup file as per the instructions, however nothing starts up except fluxbox. It doesn't matter what app I try, so it isn't an app problem. here is my startup file: #!/bin/sh # # fluxbox startup-script: # # Lines starting with a '#' are ignored. # Change your keymap: xmodmap "/home/josh/.Xmodmap" # Applications you want to run with fluxbox. # MAKE SURE THAT APPS THAT KEEP RUNNING HAVE AN ''&'' AT THE END. tint2 & tilda & # And last but not least we start fluxbox. # Because it is the last app you have to run it with ''exec'' before it. exec fluxbox # or if you want to keep a log: # exec fluxbox -log "/home/josh/.fluxbox/log" I have also tried tests such as "touch ~/testwoked" and such, nothing works. It makes no difference if the file is executable or not.

  Read the article

• wpftoolkit DataGridTemplateColumn Template binding

  - by Guillaume

  I want my datagrid columns to share a cell/celledit template. I have the solution do that (thanks to WPF DataGridTemplateColumn shared template?). Now what I would love to is improving the readability by avoiding all the node nesting. My current view looks like that: <wpftk:DataGrid ItemsSource="{Binding Tests}" AutoGenerateColumns="False"> <wpftk:DataGrid.Resources> <DataTemplate x:Key="CustomCellTemplate"> <TextBlock Text="{TemplateBinding Content}"/> </DataTemplate> <DataTemplate x:Key="CustomCellEditingTemplate"> <TextBox Text="{TemplateBinding Content}"></TextBox> </DataTemplate> </wpftk:DataGrid.Resources> <wpftk:DataGrid.Columns> <wpftk:DataGridTemplateColumn Header="Start Date"> <wpftk:DataGridTemplateColumn.CellTemplate> <DataTemplate> <ContentPresenter ContentTemplate="{StaticResource CustomCellTemplate}" Content="{Binding StartDate}"/> </DataTemplate> </wpftk:DataGridTemplateColumn.CellTemplate> <wpftk:DataGridTemplateColumn.CellEditingTemplate> <DataTemplate> <ContentPresenter ContentTemplate="{StaticResource CustomCellEditingTemplate}" Content="{Binding StartDate}"/> </DataTemplate> </wpftk:DataGridTemplateColumn.CellEditingTemplate> </wpftk:DataGridTemplateColumn> <!--and again the whole block above for each columns...--> </wpftk:DataGrid.Columns> </wpftk:DataGrid> What I would like to achieve is to bind the value at the DataGridTemplateColumn level and propagate it to the template level. Anyone know how to do that? What I tried to do is something like that: <wpftk:DataGrid ItemsSource="{Binding Tests}" AutoGenerateColumns="False"> <wpftk:DataGrid.Resources> <DataTemplate x:Key="CustomCellTemplate"> <TextBlock Text="{Binding}"/> </DataTemplate> <DataTemplate x:Key="CustomCellEditingTemplate"> <TextBox Text="{Binding}"></TextBox> </DataTemplate> </wpftk:DataGrid.Resources> <wpftk:DataGrid.Columns> <wpftk:DataGridTemplateColumn Header="Start Date" Binding="{Binding StartDate}" CellTemplate="{StaticResource CustomCellTemplate}" CellEditingTemplate="{StaticResource CustomCellEditingTemplate}"/> <wpftk:DataGridTemplateColumn Header="End Date" Binding="{Binding EndDate}" CellTemplate="{StaticResource CustomCellTemplate}" CellEditingTemplate="{StaticResource CustomCellEditingTemplate}"/> </wpftk:DataGrid.Columns> </wpftk:DataGrid> Obviously the binding porperty is not a valid property of the DataGridTemplateColumn but maybe by playing with the datacontext and some relative source could do the trick but frankly I can't find a way to implement that. Not sure if what I want is possible and i'm willing to accept a "no way you can do that" as an answer NOTE: The TextBlock/TextBox in the template is just for test (the real template is much more complex) DataGridTextColumn will not do the trick Thanks in advance

  Read the article

• Process of carrying out a BER Test

  - by data

  I am subscribed to an ISP supplying a 3meg ADSL line. Lately (for the last 4 weeks) speeds have dropped from the usual average downstream speed of ~250kbps to just 0.14Mbps (according to speedtest.net) and employees are complaining about lack of access to the server. I have been calling customer support and logging calls for the last 3 weeks, but they have been unable to determine the source of the problem other than carrying out a few bitstream tests and checking the DHCP renewal times. I am going to call back and suggest carrying out a BER test. What type of equipment is needed to carry out this test? I have access to a wide range of Cisco networking equipment. Other: We don't need a leased line as there are less than ten employees.

  Read the article

• Is there a program that compares image files and reports if they are exactly the same pixel-wise?

  - by Nathaniel Drake

  I'm making a regression testing suite for some rendering software. I need to be able to load an image file (PNG or TGA, ideally) and compare the pixel values to a standard approved image. I'd like it to be command line driven too, so I can make a batch file to run all the tests. All the compare utilities I have found so far either show differences (I just need it to fail if they are different) or compare all the bytes, meaning that meta-data will trigger a fail. Anyone got any suggestions? I am not a coder, and can only barely cobble a batch script together. Thanks for any suggestions.

  Read the article

• PC will be turned off in safe mode

  - by abbasi

  I wanted to scan a Dell inspiron N5010 laptop in safe mode. When I took it to the safe mode environment and ran the AV to scan, after some while the PC went out! The power options menu options (when plug is in) are as follows: Screensaver after 4 mins. Dim to display after 10 mins. Turn off display after 15 mins. Hard disk, sleep and hibernate are all off (set to never). I tested the machine without scanning it, i.e, went to the safe mode and waited to see what occurs after time elapsing. By observations so far (because I can apply more tests to determine that where the problem exactly is), the problem is when the machine is in safe mode and is doing something (in current case, scanning). What do you think? Why it goes out in this situation please? Thanks in advance.

  Read the article

• A website hosted on the 1.0.0.0/8 subnet, somewhere on the Internet?

  - by Dave Markle

  Background I'm attempting to demonstrate, using a real-world example, of why someone would not want to configure their internal network on the 1.0.0.0/8 subnet. Obviously it's because this is not designated as private address space. As of 2010, ARIN has apparently allocated 1.0.0.0/8 to APNIC (the Asia-Pacific NIC), who seems to have begun assigning addresses in that subnet, though not in 1.1.0.0/16, 1.0.0.0/16, and others (because these addresses are so polluted by bad network configurations all around the Internet). My Question My question is this: I'd like to find a website that responds on this subnet somewhere and use it as a counter-example, demonstrating to a non-technical user its inaccessibility from an internal network configured on 1.0.0.0/8. Other than writing a program to sniff all ~16 million hosts, looking for a response on port 80, does anyone know of a directory I can use, or even better yet, does anyone know of a site that's configured on this subnet? WHOIS seems to be too general of a search for me at this point...

  Read the article

• Obsessive behaviors in sysadmins

  - by squillman

  I have been told by colleagues (mainly non-technical) that some of my admin behaviors border on / cross the line between normal and obsessive, which sometimes leads me to wonder how screwed up I really am (read "how screwed up everyone else really is"). What are your obsessive behaviors when it comes to your sysadmin tasks and job functions? What do you do religiously that would make you twitch if you didn't do it or that others just roll their eyes at? I have reasons for my actions. I want to prove to my coworkers that I'm not alone.

  Read the article

• Run python script on server over ssh session in the background persistantly

  - by Stefan R. Falk

  I got an account from my professor for our universities CUDA server for running some tests. I am connecting via ssh over terminal. The thing is, as I close the terminal the server also seems to kill the running script. As I reconnect it has stopped. No it is not possible that the script already terminated since those test runs should take a few hours even on those machine.. Can anybody help me here? OS: Linux cuda01 3.13-1-amd64 #1 SMP Debian 3.13.7-1 (2014-03-25) x86_64 GNU/Linux

  Read the article

• How to prove that an email has been sent?

  - by bguiz

  Hi, I have a dispute on my hands in which the other party (landlord's real estate agent) dishonestly claims to not have received an email that I truly did send. My questions is, what are the ways to prove that the email was indeed sent? Thus far, the methods that I have already thought of are: Screenshot of the mail in the outbox Forwarding a copy of the original email I am aware of other things like HTTP/ SMTP headers etc that would exist as well. Are these useful for my purposes, and if so how do I extract these? The email in question was sent using Yahoo webmail ( http://au.mail.yahoo.com/ ). Edit: I am not seeking legal advice here, just technical advice as to how to gather this information.

  Read the article

• Explorer hijacked by a trojan

  - by hsdb

  I managed to catch a newish trojan that my Anti virus program wasn't able to detect. I'm usually not that bad at technical stuff regarding computers but I really don't know what to do with this one anymore. The trojan somehow managed to get my Windows to recover it every time I try to remove it by deleting it's exe (called some weird name located in Programs "asdza/saddasn.exe" (example only)). It also sets an entry in my autostart. It starts a second explorer.exe and tries to connect to some server obviously trying to steal data. (glad I still have my firewall) How can I get rid of this trojan, I really need help. It is new and probably unrecognized by all major virus scanners.

  Read the article

• Home Server restore fails cannot find boot device

  - by Tim Heuer

  I am using Windows Home Server to backup my PCs. I recently had a hard drive failure on one of my WHS connected PCs and obtained an identical sized/speed drive for my laptop. I used the latest home server restore CD and did the restore. It said it completed successfully. Upon reboot, it says 'cannot find boot device' and lists all my drives (hard drive, cd, network book) indicating no valid operating system was found. I boot using the Win7 repair disk and while it doesn't see the operating system, it sees the drive and if I go into a command prompt, I can see all my data on the drive. My laptop is Windows 7 64-bit Ultimate. I've tried most everything I can think of. I'm a technical user (software developer) so I'm pretty aware of how things work (or should). I don't feel like I'm missing a simple step here.

  Read the article

• Configure spamassassin to mark very similar messages as spam

  - by Caleb Gray

  Users on my server have been receiving spam, consistently, for some time now. I have most of spamassassin's plugins enabled, and I have made sure to enable verbose logging, where I can see that all of the plugins are working. Why is it, then, that my users are able to receive the same exact junk mail several times in a day without the message being flagged in some way? Here are the relevant headers of an email that I personally have received several copies of: X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on sub.domain.tld X-Spam-Level: *** X-Spam-Status: No, score=3.0 required=4.0 tests=BAYES_50,FSL_HELO_NON_FQDN_1, HELO_NO_DOMAIN,HTML_MESSAGE,RCVD_IN_BRBL_LASTEXT,RDNS_NONE autolearn=no version=3.3.1 Have I accidentally missed the plugin that can see that I, and others, have received the same message multiple times in a short period of time?

  Read the article

• Methodologies for performance-testing a WAN link

  - by Chopper3

  We have a pair of new diversely-routed 1Gbps Ethernet links between locations about 200 miles apart. The 'client' is a new reasonably-powerful machine (HP DL380 G6, dual E56xx Xeons, 48GB DDR3, R1 pair of 300GB 10krpm SAS disks, W2K8R2-x64) and the 'server' is a decent enough machine too (HP BL460c G6, dual E55xx Xeons, 72GB, R1 pair of 146GB 10krpm SAS disks, dual-port Emulex 4Gbps FC HBA linked to dual Cisco MDS9509s then onto dedicated HP EVA 8400 with 128 x 450GB 15krpm FC disks, RHEL 5.3-x64). Using SFTP from the client we're only seeing about 40Kbps of throughput using large (2GB) files. We've performed server to 'other local server' tests and see around 500Mbps through the local switches (Cat 6509s), we're going to do the same on the client side but that's a day or so away. What other testing methods would you use to prove to the link providers that the problem is theirs?

  Read the article

• Test site speed

  - by Elad Lachmi

  I am test driving an Akmai CDN architecture and before committing to buy, I would like to gauge the real performance gain from the acceleration feature. What would be the best MO for doing speed tests from different locations around the world? I would like to test the page load speed and not just the server response time. I would like to test speed from as many edge locations as possible. I do not mind a paid service as well, if it is optimal. Thank you!

  Read the article

• Installing SSL certs with nginx on Amazon EC2

  - by Ethan

  I finally got a cert from an authority and am struggling to get things working. I've created the appropriate combined certificate (personal + intermediate + root) and nginx is pointing to it. I got an elastic IP and connected it to my EC2 instance. My DNS records point to that IP. But when I point the browser to the hostname, I get the standard "Connection Untrusted" bit, with ssl_error_bad_cert_domain. Port 443 is open - I can get to the site over https if I ignore the warning. Weird thing is, under technical details, it lists the domain I tried to access as valid! When I try and diagnose with ssl testing sites, they don't even detect a certificate! What am I missing here? domain is yanlj.coinculture.info. Note I've got coinculture.info running on a home server without a dedicated IP and have the same problem, but I'll be moving that to the same EC2 instance as soon as I figure this thing out. I thought the elastic IP would solve things but it hasn't

  Read the article

• How realistic/easy is it to host our own web servers?

  - by morpheous

  It is increasingly looking like we will need to host our own servers, because we need modems physically attached to the server machines. I (think) we will need a T1 line to our office for starters. Dont know what else is involved other than the obvious redundancy and failover requirements. My questions are: Do we really have to do it our selves or can we find a service that allows the modems to be remote as well? If we have to host the servers ourselves, what are the steps (technical and operational) required?

  Read the article

• how can i use apache log files to recreate usage scenario

  - by daigorocub

  Recently i installed a website that had too many requests and it was too slow. Many improvements have been made to the web site code and we've also bought a new server. I want to test the new server with exactly the same requests that made the old server slow. After that, i will double the requests, make new tests and so on. These requests are logged in the apache log files. So, I can parse those files and make some kind of script to make the same requests. Of course, in this case, the requests will be made only by my computer against the server, but hey, better than nothing. Questions: - is there some app that does this already? - would you use wget? ab? python script? Thanks!

  Read the article

• Sendmail Alias for Nonlocal Email Account

  - by Mark Roddy

  I admin a server which is running a number of web applications for a software dev team (source control, bug tracking, etc). The server has sendmail running solely as a transport to the departmental email server over which I have no control. We have someone who is still in the department but no longer on the dev team so I need to configure the transport agent to redirect all outgoing email (which would be coming from these applications) to the person that has taken their place. I added an entry in /etc/aliases like such: [email protected]: [email protected] But when I run /etc/init.d/sendmail newaliases I get the following error: /etc/mail/aliases: line 32: [email protected]... cannot alias non-local names So clearly I'm doing something I shouldn't. Is there a way to get aliases to work with non-local names or alternatively is their a way to accomplish my goal of redirecting outgoing mail for this user to another one? Technical Specs if the matter: Ubuntu 6.06 sendmail 8.13 (ubuntu provided package)

  Read the article

• Configuring BitLocker on existing Windows Server 2008

  - by neildeadman

  On our file server, we want to enable BitLocker so that we can encrypt a single drive and I know that we have to also encrypt the drive the system is installed on. In my tests with VMs, I have to create a partition on the same disk as Windows is installed either before I install Windows or after (I can use the BitLocker Drive Preparation Tool). This tool shrinks the C: drive to make way for a 1.5GB partition. I'm a little concerned about doing this with a live system so wanted to see if it was possible to get BitLocker to use a partition on another drive?

  Read the article

• Ping from windows 7 get no reply but sets errorlevel to 0

  - by Doron

  From a Windows 7 machine, I ping an IP address of a turned-off machine. C:\>ping 192.168.1.222 Pinging 192.168.1.222 with 32 bytes of data: Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Ping statistics for 192.168.1.222: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss) Even though there is no reply, the errorlevel is set to 0. What I am trying to do, is figure out if a remote machine is replying to ping. One of my tests is to turn off the machine and ping it. For some reason, ping sets errorlevel to 0.

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >