Search Results

Search found 12007 results on 481 pages for 'usb speed'.

Page 171/481 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• Is there an application I can run that will tell me how fast my computer is running?

  - by Robert Hume

  At work I log into a virtual Windows machine. I'm told it runs as fast as a PC, but I'm skeptical. Is there an application I can run on the machine that will tell me how faster the machine is actually running? It would be nice if it ran on Windows and on Mac. Updating with more details -- I was asked "why does it matter" -- here's why: It matters because I'm a programmer and I need as much speed (CPU and memory) as possible to do my work. IMO, the virtual machine is noticeably slower than a basic $800 PC would be, but I need a way a proving it. Websites like Bandwidthtest.com can show me my internet speed, so I'm wondering if there's an app that can test my computer's speed.

  Read the article

• Windows 7 - sharing file - slow seek time?

  - by progtick

  I do not want to copy the files. I simply have video files (.flv) on one computer and I would like another computer user to watch them without copying. Playback is fine, but seek time (as in if you move the cursor to skip some portion of the video) takes forever! I thought wireless speed might be the culprit, so I wired the two computer. Maybe I saw some improvement but still so bad. It's 1 Gbps! (I know real speed will vary, but before I monitor real speed and such, do I have reasonable issue? Or am I bound to have very slow seek time?) What is going on? I must mention some of these files are huge!

  Read the article

• Is computer's DRAM size not as important once we get a Solid State Drive?

  - by Jian Lin

  I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more. Won't 2GB or 4GB be quite good if a Solid State Hard drive is used? I think the most worried thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with SDD drive, the problem is a lot less of a concerned? Is there a comparison as to, if DRAM speed is n, then SDD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

  Read the article

• Share internet with my phone?

  - by Kenneth Cochran

  Most people want to use their cellphone as a modem for their computer, commonly referred to as 'tethering'. I'm actually interested in doing the opposite: Sharing my landline internet connection(which is much faster than any 3G service) with by cellphone. My phone is a Verizon BlackBerry Curve 8330 and it has USB and bluetooth connections. I know both USB and Bluetooth are capable of supporting tcp/ip traffic what's not so clear is: Is IP over USB or Bluetooth standardized? Is it supported on my phone? Has my cellphone company crippled my phone to prevent me from using it?

  Read the article

• Any opinions on Paragon's NTFS for Mac solution?

  - by AngryHacker

  I am currently using the free NTFS-3G to access my NTFS drive from the Mac. It seems pretty stable (except once in the very beginning, it locked up the Mac and corrupted my NTFS drive, which I then fixed with chkdsk from a PC). However, speed is NOT one of its virtues. I've been looking at buying Paragon NTFS for Mac OS X 7.0. Their product comparison PDF claims nearly double the speed (vs NTFS-3G) in almost every category (read, write, etc...). Can someone tell me whether the product is stable and whether the speed claims are true.

  Read the article

• How to Shutdown PC by Pressing Power Button

  - by AgA

  I always Hibernate my PC. Sometimes when I boot, it does not recognize the mouse/keyboard or any USB devices. I've also setup it to go in sleep in 5 minutes. In that case I can't restart the PC so that USB starts working. When I press the Power button then it starts shutdown but asks confirmation twice one is for shutdown by force confirmation and then there is one more. When my USB is disabled I can't input these options. So I switch off the power. What I want is that upon pressing Power Button it should at once start shutdown without asking any more confirmations System details: Win-7 Home Premium 64 bit Intel i3 530 Asus P montherboard EDIT: It is Desktop PC

  Read the article

• RHEL kickstart with external DVDrom drive

  - by AndyM

  HI I've an old Dell poweredge server with an CDROM drive. I've attached a USB DVDROM and USB stick with my ks.cfg on so I can install RHEL from DVD not loads of CDs :-) I can boot from the RHEL media in DVDROM and point the installer to the USB ks.cfg. This works but the ks.cfg script has the cdrom keyword in it. The install then stops and asks for the RHEL media to be in the CDROM drive not the DVDROM. How can I change the ks.cfg so it uses the external DVDROM for the install media not servers builtin cdrom drive ? I know I can go and rebuild my DVD image to include the ks.cfg , but this is an extra step I dont want to do if I have to. Regards Andy

  Read the article

• P2V using Acronis True Image Home 10 and Windows 7

  - by Anthony

  I have a full system image using Acronis True Image Home 10 and want to run it as a virtual machine on Windows 7 Professional. I have created a virtual machine but Windows Virtual PC doesn't allow access to a USB external hard disk when booting from the Acronis Recovery CD. I've copied the backup onto the host machine and I can access it via the network using the Acronis boot CD but I'm wondering if there is an easier way? Does any other free Virtual Machine software support USB devices during boot (i.e. I can restore a backup image from the USB hard disk directly)

  Read the article

• linux kernel option to set sata disk to udma/133 1.5gbps

  - by John Doe

  hi, i try to speed up boot time of my linux server box which uses removable HDD rack's the current boot time is around 2 min's but if i connect the hdd's directly to the mainboard its about 2 sec's the problem is that ahci's kernel implementation causes a timeout of around 30 seconds for each disk during boot which originates from the hdd-rack after the timeout the kernel prints that the disk is limited with speed to 1.5gbps and udma/133 is used so the question i have is: how can i set this in grub as a boot option so the kernel doesnt have to wait for a timeout and just hardcoded limits the speed of the disks? i read about a few options like pci=nomsi or such, which dont work thats why im asking for limiting precisely the disks during boot thx

  Read the article

• What is a good motherboard for the Intel i7 series processor?

  - by jasondavis

  I am lost on choosing a good miotherboard at a decent price for my Intel i7-930 CPU. I have read bad things about all of them so far. Issues with RAM not working correctly, Windows not loading with USB keyboards plugged in and all kinds of nightmare stories. Here is my needs. - 6g/b SATA 3 - USB 3.0 - Cheaper is better - Support for up to 24gb of RAM, I will start out with only 12gb though - I will use 64bit v. of Windows 7 so the 4gb RAM limit should not be a problem from my OS - Should be able to boot even if I have a USB keyboard plugged in. If you have experience with a motherboard that meets these specs, please do tell about it. I appreciate any help, I am stuck right now on picking a good board.

  Read the article

• Serial converter - cat /dev/ttyUSB0 hangs on open

  - by Alex

  I am using Ubuntu 11.04 and attached a Garmin data cable. The device gets recognized [17718.502138] USB Serial support registered for pl2303 [17718.502181] pl2303 2-1:1.0: pl2303 converter detected [17718.513416] usb 2-1: pl2303 converter now attached to ttyUSB0 [17718.513443] usbcore: registered new interface driver pl2303 [17718.513446] pl2303: Prolific PL2303 USB to serial adaptor driver ... but when I do a strace cat /dev/ttyUSB0 it hangs on the open part and does not continue any more open("/dev/ttyUSB0", O_RDONLY|O_LARGEFILEC If I do the same on Ubuntu 12.04 it stops on fread(" ... ") which is okay, as there is currently no data comming in at this port. I am not sure if it is just a different configuration of the system or an driver related problem. How can I track this down further? Unfortunately I can not update the old Ubuntu 11.04 system for different reasons at the moment.

  Read the article

• Development environment for embedded system

  - by Howard Lee Harkness

  I need to develop software in C/C++ for an embedded system. I have Debian 6 running off of a USB hard drive. I would like to be able to generate a stripped-down kernel with modules, and install them either on a CF card or a USB 'thumb' drive. I succeeded in building a Linux 3.6 kernel and running it in Debian off of the USB hard drive, but I am having trouble figuring out how to install it on the thumb drive. I would like a build cycle that looks like this: 1) Build module or kernel with desired software 2) Install it on thumb drive 3) Boot and test I would like to use the same system for both development and testing, if that is feasible. I am looking for resources and tutorials that would help me understand how to do this.

  Read the article

• How to charge an iPhone on a Windows PC without Installaing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• iMac boot from linux partition on external drive

  - by user74757

  I have the following "setup:" iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]] | | | | (USB) | | | | [[MISC STORAGE PARTITION] [MISC STORAGE PARTITION] [EXT2 UBUNTU PARTITION]] I routinely use the firewire drive to boot MAC OS X. However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd). My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)... Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.

  Read the article

• How do I unmount a charging device in Linux?

  - by PeanutsMonkey

  I have a mobile device attached via USB to a Linux box and wish to unmount it. I ran the command fdisk -l however it does not list a mount point. I then ran the command lsusb which yielded the screenshot below. I then proceeded to search the /dev/disk/by-id directory and was found the following file The file is a symbolic link to what appears to be /dev/sdc Questions Why does it not appear when I run the command fdisk -l? How do I unmount it properly without simply yanking the USB cord from the USB port?

  Read the article

• Is a computer's DRAM size not as important once we get a Solid State Drive?

  - by Jian Lin

  I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more? Won't 2GB or 4GB be quite good if a Solid State Drive is used? I think the most worrying thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with an SSD drive, the problem is a lot less of a concern? Is there a comparison as to, if DRAM speed is n, then SSD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• PS/2 mouse works with Windows 7 32-bit but not recognised by 64-bit, What to do?

  - by Bogan

  Our USB mouse was stolen and a PS/2 OK_520 Mouse that works OK on my Medion PC, running Windows 7 32-bit, if plugged in before booting, is not recognised by Windows 7 64-bit on a Dell INSPIRONone_19T with a 19" Touch Screen. (It is a communal computer available to all residents.) A USB mouse works OK and the Update Driver option reports: 'driver is up to date'. Without the USB Mouse, Device Manager/Mice shows only the Touch Screen as a Mouse. The Add New Hardware option searches but shows nothing and the Troubleshooter says ' device possibly not recognised, alterations made to system, try again.' but it is still not recognised after repeated re-boots. The BIOS does not seem to have any option to enable a PS/2 Mouse. The Mouse is very old so maybe it is not 64-bit compatible, or there is no 64-bit driver for one, but how to get one if the device is not recognised?

  Read the article

• How is it possible for SSD's drives to have such a good latency?

  - by tigrou

  First time i read some information about SSD's, i was surprised to learn they internally use NAND flash chips. This kind of memory is generally slow (low bandwidth) and have high latency while SSD's are just the opposite. But here is how it works : SSD drives increase their bandwidth by using several NAND flash chips in parallel. In other words, they do some data striping (aka RAID0) across several chips (done by the controller). What i don't understand is how SSD's drives have such a low latency, whereas they are using NAND chips? (or at least lot better than what a typical single NAND chip would do) EDIT: I think under-estimate NAND chip capabilities. USB drives, while powered by NAND's are mostly limited by USB protocol (which have a pretty high latency) and the USB controller. That explain their poor performance in some cases.

  Read the article

• I believe I need a wireless access point, but can I do it with a wifi router?

  - by Flotsam N. Jetsam

  My needs are simple, I think: I have a laptop upstairs with a usb wifi that I use to connect to my neighbor's wifi which I share (with their knowledge). I have a laser printer downstairs that my wife doesn't wants to stay down there (big, bulky and ugly), but that we both need to print stuff off. It has wired networking and I have wired hub and router down there. The usb wifi on the laptop has absolutley the best reception I've ever seen or heard of. I cannot get onto the neighbor's net with the thing downstairs though--sortof in the ground. What do I need downstairs to give printer access to my laptop wirelessly? One thing I can't do in this solution is have a computer on downstairs, so I would think that would eliminate a usb solution.

  Read the article

• questions on transfer rate

  - by Nrew

  I tested my internet speed at speedtest.net. And go the result. .42Mbps Download and .21 Upload rate. My classmate got the same download speed of .42Mbps but has .87Mbps upload rate. Does upload rate affect the transfer rate?Because even though we got the same download speed. His transfer rate is about 100kbps downloading a movie from a torrent. And mine is only about 47kbps. Also the same torrent. And even direct download its always 47kbps. Is it possible to tweak something in order to have higher transfer rates.

  Read the article

• What are my options for booting OSX 10.6 when my DVD drive is broken?

  - by Kev

  I'm about to completely re-pave my Mac Mini but the DVD drive has died on me which means I can't boot from the installation media. I know I can boot from a USB stick but I don't have one available, what are my options given the following hardware at hand? Netgear ReadyNAS Duo NAS (NIC or USB only, no Firewire) USB HDD (no Firewire) I've ripped an ISO of the installation disk, can I somehow get the Mini to boot from this image using one of the above? If I decide not to re-pave but just upgrade, can the Mac be upgraded just using an OSX 10.6 ISO image on its disk?

  Read the article

• Does the Dell Inspiron 1501 handle more than 4 Gb of RAM?

  - by zillion

  After the following comment on my last question, I'm thinking about upgrading my RAM: I got a 160 GB Scorpio Blue a couple months ago for my 1501. It's nice. That + 2 GB Crucial RAM have rather revived my notebook (meaning a very nice speed and storage boost). I was outgrowing it... – Nathaniel What would be the best choice to add more RAM? I've already got 2 GB, but I'm not sure what their speed is. What are the size, type and speed limitations for RAM on my particular laptop?

  Read the article

• How to install Windows on a laptop with no CDROM drive?

  - by Jason Kester

  I have an old Thinkpad X60 that I'd like to wipe clean and rebuild. Seeing as this machine doesn't have an optical drive, what's the easiest way of installing Windows XP? I have an external USB hard drive available. Would it be possible to run the install from that instead? Otherwise, what options do I have? Edit: assuming we're using a USB mass storage device... Is there a BIOS setting that I would need to change, or will it configure itself automatically? Would the USB drive need to be configured in any special manner, or would simply having a copy of the Windows CD files in a directory there be sufficient? Since the first couple answers that came in were basically "yes", I guess I didn't phrase my question correctly. I'm asking for detailed instructions on how to do this, not just a sanity check that I'm headed in the right direction. Thanks!

  Read the article

• Using the Android SDK on a Mac, Eclipse is really slow. How can I speed it up?

  - by morais

  I'm using Eclipse + the Android SDK on a Mac running Snow Leopard to develop Android apps. Thing is, Eclipse is really slow - like, it "beach balls" for a few seconds when changing tabs. Is there anything I can do to improve it's performance?

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >