Search Results

Search found 7081 results on 284 pages for 'power cycle'.

Page 176/284 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

• Suggestions for Troubleshooting WIndows 7 lockups

  - by Craig L

  I've got a Dell Latitude E6500 that was working fine under Vista x64. I got one of the new Seagate 500GB Hybrid SSD/HD 2.5 drives and thought.. hmm.. let's try Win 7 x64 on it. Bottom line: It works great for hours and then it will hard lock. I don't mean BSOD (or whatever the Win7 equivalent is). I mean my screen is displaying a static image (if there is a clock displayed, it will be frozen at the time the lockup occurred) and the mouse and keyboard do not work. Control-Alt-Delete will not work. I have to hold down the power button to reboot. The event log records NOTHING at the time the lockup occurs. Obviously something is happening to the system to cause the lockup, but the default Windows 7 x64 doesn't log it. How can I log the things Windows doesn't normally log in Event Viewer ?

  Read the article

• SATA hard disk for laptop on Desktop PC

  - by Lawliet

  I know that this forum is for programming-related questions only, but I'm having this dilemma so here I go. Can I connect a laptop SATA hard disk to Desktop PC? Do I have to use some adapters or I can just plug in SATA power connector and SATA data cable like my Desktop hard disk is connected? I noticed that both laptop and desktop SATA disks use same connectors, but I'm afraid that I might fry my laptop hard disk because the SATA connector has both 12V and 5V voltage (given the fact that laptop hard disks has input voltage of 5V) Thanks in advance

  Read the article

• Hypertransport sync flood error

  - by Carl B

  What is it? And what causes it? Is it only for uncorrectable DIMM Errors(Troubleshooting DIMM errors)? When an UCE occurs, the memory controller causes an immediate reboot of the system. During reboot, the BIOS checks the Machine Check registers and determines that the previous reboot was due to an UCE, then reports this in POST after the memtest stage: A Hypertransport Sync Flood occurred on last boot 3 BIOS reports this event in the service processor’s system event log (SEL) as shown in the sample IPMItool output There are what seems to be some suggested answers to include Bad Caps Bios verisons (happens in one version not the other) Graphics card issues Lack of power to the CPU The list of possible generators seems to target everything but the computer case. System Specs: Windows Home Premium 64 Motherboard - MSI790FX-GD70 (MS7577) / Bios v 1.9 (American Megatrensa Inc) Ram - Patriot G Series ‘Sector 5’ Edition 4GB DDR3 1600 CPU - AMD Phenom II X2 555 Black Edition Callisto 3.2GHz Socket AM3 80W (Note: unlocked 2 cores CPU Z ids it as phenom II x4 B55) Graphics - 2 x Radeon 5750 in crossfire PSU - ABS 900w HDDs - 2 Seagate 1.5 TB Sata SSD - 1 OCZ 120 GB Vertex Plus R2

  Read the article

• What is the Best Free Linux Gateway

  - by rockinthesixstring

  I'm looking at moving away from using my DIR-825 as a gateway and moving into a Linux box to do it all for me. I've found IPCop, but I'm looking for something with a little more power. My main goal is basically to be able to point different external domain names to different internal servers. backup.example.com - 192.168.0.5 home.example.com - 192.168.0.1 I host my DNS on my own dedicated server (windows), so I don't know much about doing the gateway thing in my home (my hosting provider does it all for me). Do any of you know of any free Linux Distros that can accomplish what I'm looking for?

  Read the article

• Repair snapped USB flash drive

  - by Richard Slater

  I have a USB Flash Drive that has had the USB connector snapped away from the circuit board. In the past I have had great sucess with soldering the connector back to the circuit board with 4 solid core wires. Unfortunatly this particular device shows up as "Unknown Device" in device manager and displays 0ma power usage. Giving a closer look at the circuit board it appears that the Data + connector has come away from the PCB. Which would explain why it is not recognised. Is there any practicable way of lifting the data from the device? larger version

  Read the article

• upgrading my computer system for office use

  - by denise ellul

  Presently I have the under-mentioned computer system. What should be changed and upgraded with the following products that I own presently? I am interested in performance issues related to cache memory, bus speed, RAM, CAS latency as well as other considerations. Thanks for your help. Processor (CPU): Intel Celeron Dual Core E3300 2.5 GHz Motherboard: Asus P5QPL-AM G41 Main Memory (RAM): 2 GB Team Elite DDR2 PC8000 Case: Coolermaster RC330 Power Supply Unit: 500W EZ-Cool Standard Storage Device (Hard Drive): 500GB Samsung Video Card: Intel GMA X4500 (On-board) Optical Drive: LG GH22NS50 Sound Card: AC 97 (On – board) Card Reader: Akasa Black TFT Monitor: 19” View Sonic Speakers: Logitech S120 2.0

  Read the article

• What does "cpuid level" mean?

  - by ogzylz

  For an example, I put just output from 1 core of a 16 core machine. What does the output mean by "cpuid level" of "6"? Also, what do "bogomips" of "5992.10" and "clflush size" of "64" mean? processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception: yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5992.10 clflush size : 64 cache_alignment: 128 address sizes: 40 bits physical, 48 bits virtual power management:

  Read the article

• Dell U271 monitor DisplayPort suddenly not working

  - by Amir Latif

  My new(ish) Dell U271 took a bit of a knock and it now suddenly doesn't recognise the Macbook plugged into it via DisplayPort - this had been working great for several months up until now. When I "Scan Sources", it doesn't find anything on DisplayPort. However, one suspicious behaviour leads me to think all might not be lost. When the Mac is woken from sleep, this used to kick the monitor in (as an monitor would) and while it no longer does that, the light on the monitor does go from standby orange to blue briefly, then the monitor says it's going into "power save" mode. It seems like it gets some kinda signal. Any ideas on how I can diagnose the problem? I'm trying to find another mac but no one near me has one ...

  Read the article

• windows vms unpredictibly require login

  - by marrrkus

  I have a cluster of vms on a number of cloned servers using libvirt/qemu. Occassionally the windows 7 vms randomly require a login screen, even though I've done everything I can think of and can google to turn off a login screen. I've used netplwiz to turn off requiring a password (http://pcsupport.about.com/od/windows7/ht/auto-logon-windows-7.htm) manually changed the regsistry using the instructions here: http://superuser.com/a/28654 changed requiring a password in the power saving settings in the control panel if the screen goes to sleep told the screen to never go to sleep (in the control panel) Even with all of these things, some of the vms *still* randomly require a login. I have no idea what else to try. Any ideas??

  Read the article

• Scripts under pm/sleep.d are not getting called when suspending with KDE 4.3

  - by Richard Corden

  Fujitsu-Siemens H240, Slackware-current, KDE 4.3.2. I would like to perform some additional steps when my laptop suspends. I found this SU question which is very close to what I am asking, however the scripts that I placed in that directory are not being called for me. This could be a Slackware thing, or its possible that KDE has a different location for these scripts. I am suspending by using the "Suspend" radio button on the "Guidance Power Manager" dialog of KDE. Is there a standard location where I can place my scripts so they'll be run before and then after the machine has suspended?

  Read the article

• Multiple servers acting like a single one with all the hardware?

  - by marc.riera

  Hello, by now I have 10 servers for hpc, power computing oriented. My users need to launch several processes using qmake. The users are used to work with ubuntu 9.10, and the software from the repositories is switable for them. I've deployed ubuntu 9.10 to all 10 servers (pxe rocks). By now we work with parallel-ssh and cluster-ssh, which allows as to launch the same process to all servers. With this tools this tools the servers remain as independent but with the same software and the same launched command. Now we would like to go to next step and see all the servers as a single one with all the resources from the other 9 as if was its resources. The difference would be substantial in time to process and also time to design the command to launch. Any advice on wich software to use will be very useful? Thanks

  Read the article

• Why doesn't my Droid phone charge when connected to a powered USB hub that is not connected to my computer?

  - by pkaeding

  I notice that my new Motorola Droid phone charges perfectly fine when I connect it to my computer via the USB cable, or if I connect it to a car cigarette lighter-USB adapter, or a wall power-USB adapter. It also works fine when I connect it to a powered USB hub that is connected to my computer. However, if that same powered USB hub is not connected to my computer when I connect the phone, it does not charge. If I connect the computer to the hub, and then connect the phone to the hub, it will charge. If I then disconnect the computer from the hub, the phone will continue to charge. Does anyone know why this is happening, or what I can do to be able to charge my phone from a powered hub, without my computer being present?

  Read the article

• Unmounted root partition

  - by Jack

  My server running Debian lenny has just had a power cut recently and its come back up with the root partition in read only mode. I tried to remount the filesystem in read write mode with mount -n -o remount,rw / which then gave the output mount: block device /dev/hda1 is write-protected, mounting read-only. But now the root filesystem isn't mounted at all so I can't run anything to mount the partition again or any other command for that matter such as shutdown because /bin/ isn't there. Is there anything I can do remotely?

  Read the article

• Printer Problems: Snow Leopard with Epson CX 4200 - worked and then didn't?

  - by user33521

  We got a new laptop in the office with Snow Leopard. We installed the new driver for the Epson CX 4200 printer we have and it seemed to be working okay. However, after an Apple update, the printer stopped working. A few days later we saw an update for the Epson driver and so we downloaded and installed that. However, the printer still isn't working. We plugged and unplugged the printer power cable and usb cable, and also tried replacing the ink (because the colour ink light was blinking)...however the printer still isn't working?

  Read the article

• MacBook says to replace battery. Should I?

  - by Palantir

  Hi! My MacBook says that battery is not charging, and the battery is completely empty (in fact, pressing the button on the battery illuminates no LEDs). If I plug the power adapter off the mac shuts off immediately. I tried with a spare adapter, and it won't charge it. System information says it has 380 cycles. The battery is 2.5 years old. System profiler says the battery has 0 mAh of capacity, and that it should be replaced. Should I just buy a new battery, or should I bring it to an apple point, and leave it there? They can take a look at it (it's on AppleCare), they told me that they will repair it is there is anything wrong with the charging circuit, but they won't give me a new battery. They will keep the laptop for 10 working days at least... I hate when this happens :P

  Read the article

• SBD killing both cluster nodes when there are even small SAN network problems

  - by Wieslaw Herr

  I am having problems with stonith SBD in a openais-based cluster. Some background: The active/passive cluster has two nodes, node1 and node2. They are configured to provide an NFS service to users. To avoid problems with split-brain, they are both configured to use SBD. SBD is using two 1MB disks available to the hosts via an multipath fibre-channel network. The problems start if something happens with the SAN network. For example, today one of the brocade switches got rebooted and both nodes lost 2 out of 4 paths to each disks, which resulted in both nodes committing suicide and rebooting. This, of course, was highly undesirable because a) there were paths left b) even if the switch would be out for 10-20 seconds a reboot cycle of both nodes would take 5-10 minutes and all NFS-locks would be lost. I tried increasing the SBD timeout values (to 10sec+ values, dump attached at the end), however a "WARN: Latency: No liveness for 4 s exceeds threshold of 3 s" hints that something isn't working as I would it expect to. Here is what I would like to know: a) Is SBD working as it should killing nodes when 2 paths are available? b) If not, is the multipath.conf file attached correct? The storage controller we use is an IBM SVC (IBM 2145), should there be any specific configuration for it? (as in multipath.conf.defaults) c) How should I go about increasing the timeouts in SBD attachements: Multipath.conf and sbd dump (http://hpaste.org/69537)

  Read the article

• Free-flow Alternative to Powerpoint?

  - by Nick Klauer

  So I've been digging around the net trying to find a good set of alternatives to Powerpoint. Part of my interest is that I found one, Prezi, that I liked for it's free-form style. Part of the power of it was that I can zoom out and select any part of the presentation to continue from and it feels much like a mind map or association of thoughts. Are there any other tools that offer anything similar in vein to this way of presenting material? I'm looking for something that just pops differently than a death-by-powerpoint-style presentation, so I would be happy to find tools that help present information in more fluid styles. It doesn't have to mirror Prezi, and I wouldn't want that, but after seeing what Prezi does, I have to think there are other ways of presenting information to a group of people than one square slide at a time.

  Read the article

• Very different results from df after a few seconds

  - by tatus2

  When the backup moves the files from one server to the other the results from df change every few seconds in an impossible manner. The source host is running rsync. On the destination host I'm running the following command every few seconds: echo `date` `df|grep md0` Results are below: Sat Jun 29 23:57:12 CEST 2013 /dev/md0 4326425568 579316100 3527339636 15% /MD0 Sat Jun 29 23:57:14 CEST 2013 /dev/md0 4326425568 852513700 3254142036 21% /MD0 Sat Jun 29 23:57:15 CEST 2013 /dev/md0 4326425568 969970340 3136685396 24% /MD0 Sat Jun 29 23:57:17 CEST 2013 /dev/md0 4326425568 1255222180 2851433556 31% /MD0 Sat Jun 29 23:57:20 CEST 2013 /dev/md0 4326425568 1276006720 2830649016 32% /MD0 Sat Jun 29 23:57:24 CEST 2013 /dev/md0 4326425568 1355440016 2751215720 34% /MD0 Sat Jun 29 23:57:26 CEST 2013 /dev/md0 4326425568 1425090960 2681564776 35% /MD0 Sat Jun 29 23:57:27 CEST 2013 /dev/md0 4326425568 1474601872 2632053864 36% /MD0 Sat Jun 29 23:57:28 CEST 2013 /dev/md0 4326425568 1493627384 2613028352 37% /MD0 Sat Jun 29 23:57:32 CEST 2013 /dev/md0 4326425568 615934400 3490721336 15% /MD0 Sat Jun 29 23:57:33 CEST 2013 /dev/md0 4326425568 636071360 3470584376 16% /MD0 As you can see I start from USE of 15% and after 15 seconds I'm at 37% (I don't need to mention that the backup can not copy this huge amount of data in such a short time). After ~20 seconds the cycle closes. I'm again roughly at the same usage as earlier. The value is reasonable, ca. 35 Mb were copied. Can somebody explain to me what is going on? Does df only make an estimation of usage instead of used value?

  Read the article

• Lost contact with my NAS after changing its IP

  - by Beles

  I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

  Read the article

• Use router as external high powered Wi-Fi adapter

  - by skywinder

  I need a powerful external Wi-Fi adapter for a couple of days. I heard that some types of router support this mode, allowing me to connect the router to my notebook and just use it as an external Wi-Fi interface. Is it possible to connect a router as an external Wi-Fi adapter? How can I determine it? Updated: My purpose is to set the router to monitor mode and check networks around through my notebook to provide better configuration for my network (power, channels, etc). My internal notebook Wi-Fi adapter is too weak for this purpose. Should I use special drivers for that? If yes, can someone describe, step-by-step, how to do it? p.s. I want to use ASUS RT-N56U as an external Wi-Fi adapter on OS X or Ubuntu.

  Read the article

• Juniper J4350 out of order

  - by Benjamin Baron

  I have got two (2) Juniper routers J4350 that are out of order : All the interfaces are down (leds on the interfaces don't ligthen, ping dosen't respond) No output on the console port (even when booting) I've tried to reset the router (holding the RESET CONFIG button on the front panel during 15 seconds) and nothing happened, even while booting the device I've opened the router to check the fans. I've removed some dust and nothing has changed. I wanted to precise that the leds on the front panel are all on: The POWER led is green The STATUS led is red The ALARM led is on and is orange The HA (High Availablity) is on and orange as well I have found nothing on the Internet to solve this problem... Thank you for helping me :)

  Read the article

• Battery backed write cache behavior upon disk change

  - by Halfgaar

  We use 3ware Inc 9650SE SATA-II RAID PCIe RAID controllers with battery backed write cache. Our spare hardware has the same controller. I was wondering; are these controllers smart enough not to sync the cache when the disks have been changed? For example, if I deploy one of those spare machines by putting in the disks of another machine and that spare machine still has pending writes, will it be smart enough not to perform those writes on the replaced array? Edit: my scenario is not really made clear, so let me give an example: server1 goes down because of power supply failure. I put the disks in server2 and start. I repair server1 I put the disks back from server2 in server1 (it's not relevant right now that in reality I would probably keep server2 running). If server1 doesn't have safeguards, it will write to the array, thinking it's simply powering up again, corrupting it.

  Read the article

• PC will be turned off in safe mode

  - by abbasi

  I wanted to scan a Dell inspiron N5010 laptop in safe mode. When I took it to the safe mode environment and ran the AV to scan, after some while the PC went out! The power options menu options (when plug is in) are as follows: Screensaver after 4 mins. Dim to display after 10 mins. Turn off display after 15 mins. Hard disk, sleep and hibernate are all off (set to never). I tested the machine without scanning it, i.e, went to the safe mode and waited to see what occurs after time elapsing. By observations so far (because I can apply more tests to determine that where the problem exactly is), the problem is when the machine is in safe mode and is doing something (in current case, scanning). What do you think? Why it goes out in this situation please? Thanks in advance.

  Read the article

• Home server - HP Proliant Microserver - Software and setup - OS on USB stick? [closed]

  - by Lloyd Watkin

  I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

  Read the article

• Switching between taskbar tasks sequentially

  - by Doug Kavendek

  In Firefox and some other tabbed interfaces, I can use Ctrl-PgUp/Down to cycle through tabs sequentially, based on their order in the tab list. I associate what is what based almost entirely on its position along the tab bar and what is next to what, so this is extremely useful for the way I keep track of things in my head. However, I haven't been able to find an equivalent for actual taskbar items in Windows, such that with a single shortcut will switch focus to the task item either to the left or the right of the current task in focus. There's a lot of existing shortcuts that I use (Alt-Tab, Ctrl-Esc, and their counterparts), but these use the window manager's stacking order, so it always changes based on what you've switched between in the past, and so their usefulness generally only lies in switching between two apps -- above that, I just can't keep that kind of stack in my head. The closest shortcut I've found is Winlogo-Tab, but it only moves a selector on the taskbar, so you have to hit space after moving it, and it also seems to originate the selector from the leftmost item every time (rather than relative to the current item). Am I just a weirdo and will have to write my own app to perform these actions?

  Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >