Search Results

Search found 5693 results on 228 pages for 'ago'.

Page 177/228 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• I’m a Phoenix… and I’m miffed

  - by Stan Spotts

  For personal reasons, almost 30 years ago I left school to enter the workforce. I decided late 2008 to go back to school and finish my degree. After the expected loss of credits for a transfer, from Temple University to University of Phoenix, I'm now about 75% done. The experience has been interesting. Classes are time compressed, only 5 weeks each. Because I have a family and a full time job, I'm taking one at a time. Even so, I've written more papers in these classes than I ever wrote at Temple. My own papers are one thing, but the team papers give me heartburn since I can't completely control what goes into them. Not a big deal except that they make up 30% of our grade. In any case, most of the class facilitators have been great. I had great ones for Accounting, Finance, and frankly most others. I've had a few (4, maybe) cases where I was less than 2 points from an A, and asked the facilitator if I could get any of my work reviewed to see if I could get those extra points. I figured it was worth a shot, and there were no extenuating circumstances to help make my case. I think that only one facilitator decided after a review of one paper that my interpretation was good, just not what he expected, and gave me another point, which gave me an A. So while none are pushovers, they've all been open to discussion, which is as much as I should expect. Overall, good experience. That is, until my last class. On the second week, the day I was due to hand in my personal assignment for the week, I was in an accident. An SUV creamed my little Ford Focus, and totaled it (estimated repair over $11K). I was pretty banged up, especially my left shoulder. I was scheduled for rotator cuff surgery for two weeks later, and getting hit against the door really made it worse. After dealing with the police, the EMT, the tow truck, and the Percocet and Flexeril for the pain, I crashed for the night and didn't get to upload my paper until the next day. The instructor took 30% off for it being late, even after I supplied photos of the car, my arm (huge bruises), and offered to supply the police report number. I figured I'd be okay since that's 2.7 points, and I could lose up to 5 before jeopardizing an A grade. Well, that wasn't the case as we lost more points than I expected on our team paper in Week 5. I ended up with a 94.3. Yes, 7/10 of a point from an A. Of course I asked the instructor to review the issue with the accident and give me just the 0.7 points I needed for the A. That got me a short response of "I have received your emails and review your work over the last five weeks. Your current grade will stand. If you would like to dispute your grade then please feel free to contact your academic advisor. I wish you much success in your professional and academic career." Brrrr….! So I asked my academic advisor to file a dispute. If it wasn't that a pretty bad car accident was the cause, I wouldn't have. Without the grade reduction, I would have had a 97 for the class, so I'll argue that I was performing at the A level throughout the class. Why her purported "review" of my work didn't then warrant such a minor adjustment, I don't know. An A- drops my GPA, and this ticked me off. Now I have to wait and see what the school says about the grade dispute.

  Read the article

• Making a Job Change That's Easy Why Not Try a Career Change

  - by david.talamelli

  A few nights ago I received a comment on one of our blog posts that reminded me of a statistic that I heard a while back. The statistic reflected the change in our views towards work and showed how while people in past generations would stay in one role for their working career - now with so much choice people not only change jobs often but also change careers 4-5 times in their working life. To differentiate between a job change and a career change: when I say job change this could be an IT Sales person moving from one IT Sales role to another IT Sales role. A Career change for example would be that same IT Sales person moving from IT Sales to something outside the scope of their industry - maybe to something like an Engineer or Scuba Dive Instructor. The reason for Career changes can be as varied as the people who make them. Someone's motivation could be to pursue a passion or maybe there is a change in their personal circumstances forcing the change or it could be any other number of reasons. I think it takes courage to make a Career change - it can be easy to stay in your comfort zone and do what you know, but to really push yourself sometimes you need to try something new, it is a matter of making that career transition as smooth as possible for yourself. The comment that was posted is here below (thanks Dean for the kind words they are appreciated). Hi David, I just wanted to let you know that I work for a company called Milestone Search in Melbourne, Victoria Australia. (www.mstone.com.au) We subscribe to your feed on a daily basis and find your blogs both interesting and insightful. Not to mention extremely entertaining. I wonder if you have missed out on getting in journalism as this seems to be something you'd be great at ?: ) Anyways back to my point about changing careers. This could be anything from going from I.T. to Journalism, Engineering to Teaching or any combination of career you can think of. I don't think there ever has been a time where we have had so many opportunities to do so many different things in our working life. While this idea sounds great in theory, putting it into practice would be much harder to do I think. First, in an increasingly competitive job market, employers tend to look for specialists in their field. You may want to make a change but your options may be limited by the number of employers willing to take a chance on someone new to an industry that will likely require a significant investment in time to get brought up to speed. Also, using myself as an example if I was given the opportunity to move into Journalism/Communication/Marketing career from my career as an IT Recruiter - realistically I would have to take a significant pay cut to make this change as my current salary reflects the expertise I have in my current career. I would not immediately be up to speed moving into a new career and would not be able to justify a similar salary. Yes there are transferable skills in any career change, but even though you may have transferable skills you must realise that you will also have a large amount of learning to do which would take time. These are two initial hurdles that I immediately think of, there may be more but nothing is insurmountable. If you work out what you want to do with your working career whatever that may be, you then need to just need to work out the steps to get to your end goal. This is where utilising the power of your networks and using Social Media can come in handy. If you are interested in working somewhere why not proactively take the opportunity to research the industry or company - find out who it is you need to speak to and get in touch with them. We spend so much time working, we should enjoy the work we do and not be afraid to try new things. Waiting for your dream job to fall into your lap or be handed to you on a silver platter is not likely going to happen, so if there is something you do want to do, work out a plan to make it happen and chase after it. This article was originally posted on David Talamelli's Blog - David's Journal on Tap

  Read the article

• jQuery Context Menu Plugin and Capturing Right-Click

  - by Ben Griswold

  I was thrilled to find Cory LaViska’s jQuery Context Menu Plugin a few months ago. In very little time, I was able to integrate the context menu with the jQuery Treeview.  I quickly had a really pretty user interface which took full advantage of limited real estate.  And guess what.  As promised, the plugin worked in Chrome, Safari 3, IE 6/7/8, Firefox 2/3 and Opera 9.5.  Everything was perfect and I shipped to the Integration Environment. One thing kept bugging though – right clicks aren’t the standard in a web environment. Sure, when one hovers over the treeview node, the mouse changed from an arrow to a pointer, but without help text most users will certainly left-click rather than right. As I was already doubting the design decision, we did some Mac testing.  The context menu worked in Firefox but not Safari.  Damn.  That’s when I started digging into the Madness of Javascript Mouse Events.  Don’t tell, but it’s complicated.  About as close as one can get to capture the right-click mouse event on all major browsers on Windows and Mac is this: if (event.which == null) /* IE case */ button= (event.button < 2) ? "LEFT" : ((event.button == 4) ? "MIDDLE" : "RIGHT"); else /* All others */ button= (event.which < 2) ? "LEFT" : ((event.which == 2) ? "MIDDLE" : "RIGHT"); Yikes.  The content menu code was simply checking if event.button == 2.  No problem.  Cory offers a jQuery Right Click Plugin which I’m sure works for windows but probably not the Mac either.  (Please note I haven’t verified this.) Anyway, I decided to address my UI design concern and the Safari Mac issue in one swoop.  I decided to make the context menu respond to any mouse click event.  This didn’t take much – especially after seeing how Bill Beckelman updated the library to recognize the left click. First, I added an AnyClick option to the library defaults: // Any click may trigger the dropdown and that's okay // See Javascript Madness: Mouse Events – http: //unixpapa.com/js/mouse.html if (o.anyClick == undefined) o.anyClick = false; And then I trigger the context menu dropdown based on the following conditional: if (evt.button == 2 || o.anyClick) { Nothing tricky about that, right?  Finally, I updated my menu setup to include the AnyClick value, if true: $('.member').contextMenu({ menu: 'memberContextMenu', anyClick: true },             function (action, el, pos) {                 … Now the context menu works in “all” environments if you left, right or even middle click.  Download jQuery Context Menu Plugin for Any Click *Opera 9.5 has an option to allow scripts to detect right-clicks, but it is disabled by default. Furthermore, Opera still doesn’t allow JavaScript to disable the browser’s default context menu which causes a usability conflict.

  Read the article

• What if &ldquo;Microsoft&rdquo; were in our shoes? About Windows Phone

  - by Vijaya Malla

  This is what I think about Microsoft Windows Phone. If Microsoft were in our shoes looking at various phones available their configurations, memory, front facing cameras etc. Microsoft disappointed the USA customer base again by not getting Nokia Lumia 800. The Past: If we talk few years ago, few business people were on their Blackberry’s and few Gadget lovers were on crappy Windows OS devices. The world was all going right till Apple came with a revolutionary device iPhone, which completely changed our perception towards phone and how great a smartphone can be. It’s not just phone but the whole technology industry. The romantic appealing of the phone and smooth touch and feel of it made everyone to get one of those bad boys. The sales went up for not just Apple for AT&T too. Even though everyone complained about the signal strength of AT&T, everyone wanted to be on it because they have iPhones. All world wanted iPhone back then except Microsoft with few comments on how it is not going to be in market. But it did great and rocked the industry. A few years later with iPhone and Android taking over the smartphone market Microsoft realized that it should be in the game too. Worked on the design of it, and gave us the best Mobile OS ever. Everyone thinks that iOS is a great OS for phones but if you have touched a Windows Phone and use it for real then you will realize the strengths of it. so last year we welcomed Windows Phone 7 The Present : Windows Phone 7 has the fastest growing market. The phones are cheap, you can buy from any carrier out there. The phone became smarter and smarter with the recent update “Mango (7.5)” and with the collaboration with Nokia, Microsoft created a new eco-system for smartphones with the best smartphone hardware and best smartphone software. Everyone in the world was excited about the collaboration. As we fly over cloud 9 imagining about Nokia made Windows Phones we all heard a good news from Nokia “Nokia World”. Nokia showed the world what a best hardware making company can do with Windows Phone 7.5 OS. Nokia Lumia 800 and 710 took the spotlight. Everyone here in USA and all over the world wanted to own a Nokia Lumia 800 because of the design, software, proprietary apps from Nokia (maps, ESPN, drive and music). If USA market had Nokia Lumia 800, then it would have been the best step Microsoft and Nokia had ever made in their history of smartphone market. With all the numbers going to Android and IPhone, its not clear on why Microsoft/Nokia did not release Lumia 800 here in USA. Its unclear if Microsoft had learnt the lesson or not. if it had learnt the lesson I guess Microsoft needs to get the Nokia Lumia 800 to the USA. The Future: This is where we hope we get the best form Microsoft. I was an iPhone user, I used 2G, 3G, 3GS, 4 and then moved to Windows Phone and never felt so happy with my iPhones’. From the day when Nokia announced the partnership with Microsoft and said that they going to come up with a new Nokia windows phone, I was dreaming for my Nokia Phone. but looks like it is not going to happen any time soon. My thoughts about the Market :  Nokia has the biggest market base in the world. Even though people moved to Android or iPhone over the years in other parts of the world like India and China, people still love to use Nokia. Everyone who uses a Windows Phone now will wait for that day when Nokia Lumia comes to the USA but what either or both of the companies should do for a better market share is to make a very aggressive move with the hardware and bet on the devices. I am pretty sure that it will work. everyone here in the USA will like to have a dual core windows phone with front facing camera and all other crazy things that android/apple phones offer. I think we just have to wait for that day and hope that day comes soon. Love Microsoft and Nokia Thank you for reading.

  Read the article

• Spending the summer at camp… Web Camp, that is

  - by Jon Galloway

  Microsoft is sponsoring a series of Web Camps this summer. They’re a series of free two day events being held worldwide, and I’m really excited about being taking part. The camp is targeted at a broad range of developer background and experience. Content builds from 101 level introductory material to 200-300 level coverage, but we hit some advanced bits (e.g. MVC 2 features, jQuery templating, IIS 7 features, etc.) that advanced developers may not yet have seen. We start with a lap around ASP.NET & Web Forms, then move on to building and application with ASP.NET MVC 2, jQuery, and Entity Framework 4, and finally deploy to IIS. I got to spend some time working with James before the first Web Camp refining the content, and I think he’s packed about as much goodness into the time available as is scientifically possible. The content is really code focused – we start with File/New Project and spend the day building a real, working application. The second day of the Web Camp provides attendees an opportunity to get hands on. There are two options: Join a team and build an application of your choice Work on a lab or tutorial James Senior and I kicked off the fun with the first Web Camp in Toronto a few weeks ago. It was sold out, lots of fun, and by all accounts a great way to spend two days. I’m really enthusiastic about the format. Rather than just listening to speakers and then forgetting everything in a few days, attendees actually build something of their choice. They get an opportunity to pitch projects they’re interested in, form teams, and build it – getting experience with “real world” problems, with all the help they need from experienced developers. James got help on the second day practical part from the good folks that run Startup Weekend. Startup Weekend is a fantastic program that gathers developers together to build cool apps in a weekend, so their input on how to organize successful teams for weekend projects was invaluable. Nick Seguin joined us in Toronto, and in addition to making sure that everything flowed smoothly, he just added a lot of fun and excitement to the event, reminding us all about how much fun it is to come up with a cool idea and just build it. In addition to the Toronto camp, I’ll be at the Mountain View, London, Munich, and New York camps over the next month. London is sold out, but the rest still have space available, so come join us! Here’s the full list, with the ones I’ll be at bolded because - you know - it’s my blog. The the whole speaker list is great, including Scott Guthrie, Scott Hanselman, James Senior, Rachel Appel, Dan Wahlin, and Christian Wenz. Toronto May 7-8 (James Senior and I were thrown out on our collective ears) Moscow May 19 Beijing May 21-22 Shanghai May 24-25 Mountain View May 27-28 (I’m speaking with Rachel Appel) Sydney May 28-29 Singapore June 04-05 London June 04-05 (I’m speaking with Christian Wenz – SOLD OUT) Munich June 07-08 (I’m speaking with Christian Wenz) Chicago June 11-12 Redmond, WA June 18-19 New York June 25-26 (I’m speaking with Dan Wahlin) Come say hi!

  Read the article

• What makes them click ?

  - by Piet

  The other day (well, actually some weeks ago while relaxing at the beach in Kos) I read ‘Neuro Web Design - What makes them click?’ by Susan Weinschenk. (http://neurowebbook.com) The book is a fast and easy read (no unnecessary filler) and a good introduction on how your site’s visitors can be steered in the direction you want them to go. The Obvious The book handles some of the more known/proven techniques, like for example that ratings/testimonials of other people can help sell your product or service. Another well known technique it talks about is inducing a sense of scarcity/urgency in the visitor. Only 2 seats left! Buy now and get 33% off! It’s not because these are known techniques that they stop working. Luckily 2/3rd of the book handles less obvious techniques, otherwise it wouldn’t be worth buying. The Not So Obvious A less known influencing technique is reciprocity. And then I’m not talking about swapping links with another website, but the fact that someone is more likely to do something for you after you did something for them first. The book cites some studies (I always love the facts and figures) and gives some actual examples of how to implement this in your site’s design, which is less obvious when you think about it. Want to know more ? Buy the book! Other interesting sources For a more general introduction to the same principles, I’d suggest ‘Yes! 50 Secrets from the Science of Persuasion’. ‘Yes!…’ cites some of the same studies (it seems there’s a rather limited pool of studies covering this subject), but of course doesn’t show how to implement these techniques in your site’s design. I read ‘Yes!…’ last year, making ‘Neuro Web Design’ just a little bit less interesting. !!!Always make sure you’re able to measure your changes. If you haven’t yet, check out the advanced segmentation in Google Analytics (don’t be afraid because it says ‘beta’, it works just fine) and Google Website Optimizer. Worth Buying? Can I recommend it ? Sure, why not. I think it can be useful for anyone who ever had to think about the design or content of a site. You don’t have to be a marketing guy to want a site you’re involved with to be successful. The content/filler ratio is excellent too: you don’t need to wade through dozens of pages to filter out the interesting bits. (unlike ‘The Design of Sites’, which contains too much useless info and because it’s in dead-tree format, you can’t google it) If you like it, you might also check out ‘Yes! 50 Secrets from the Science of Persuasion’. Tip for people living in Europe: check Amazon UK for your book buying needs. Because of the low UK Pound exchange rate, it’s usually considerably cheaper and faster to get a book delivered to your doorstep by Amazon UK compared to having to order it at the local book store or web-shop.

  Read the article

• Software development stack 2012

  A couple of months ago, I posted on Google+ about my evaluation period for a new software development stack in general. "Analysing existing 'jungle' of multiple applications and tools in various languages for clarification and future design decisions. Great fun and lots of headaches... #DevelopersLife" Surprisingly, there was response... ;-) - And this series of articles is initiated by this post. Thanks Olaf. The past few years... Well, after all my first choice of software development in the past was Microsoft Visual FoxPro 6.0 - 9.0 in combination with Microsoft SQL Server 2000 - 2008 and Crystal Reports 9.x - XI. Honestly, it is my main working environment due to exisiting maintenance and support plans with my customers, but also for new project requests. And... hands on, it is still my first choice for data manipulation and migration options. But the earth is spinning, and as a software craftsman one has to be flexible with the choice of tools. In parallel to my knowledge and expertise in the above mentioned tools, I already started very early to get my hands dirty with the Microsoft .NET Framework. If I remember correctly, I started back in 2002/2003 with the first version ever. But this was more out of curiousity. During the years this kind of development got more serious and demanding, and I focused myself on interop and integrational libraries and applications. Mainly, to expose exisitng features of the .NET Framework to Visual FoxPro - I even had a session about that at the German Developer's Conference in Frankfurt. Observation of recent developments With the recent hype on Javascript and HTML5, especially for Windows 8 and Windows Phone 8 development, I had several 'Deja vu' events... Back in early 2006 (roughly) I had a conversation on the future of Web and Desktop development with my former colleagues Golo Roden and Thomas Wilting about the underestimation of Javascript and its root as a prototype-based, dynamic, full-featured programming language. During this talk with them I took the Mozilla applications, namely Firefox and Thunderbird, as a reference which are mainly based on XML, CSS, Javascript and images - besides the core rendering engine. And that it is very simple to write your own extensions for the Gecko rendering engine. Looking at the Windows Vista Sidebar widgets, just underlines this kind of usage. So, yes the 'Modern UI' of Windows 8 based on HTML5, CSS3 and Javascript didn't come as any surprise to me. Just allow me to ask why did it take so long for Microsoft to come up with this step? A new set of tools Ok, coming from web development in HTML 4, CSS and Javascript prior to Visual FoxPro, I am partly going back to that combination of technologies. What is the other part of the software development stack here at IOS Indian Ocean Software Ltd? Frankly, it is easy and straight forward to describe: Microsoft Visual FoxPro 9.0 SP 2 - still going strong! Visual Studio 2012 (C# on latest .NET Framework) MonoDevelop Telerik DevCraft Suite WPF ASP.NET MVC Windows 8 Kendo UI OpenAccess ORM Reporting JustCode CODE Framework by EPS Software MonoTouch and Mono for Android Subversion and additional tools for the daily routine: Notepad++, JustCode, SQL Compare, DiffMerge, VMware, etc. Following the principles of Clean Code Developer and the Agile Manifesto Actually, nothing special about this combination but rather a solid fundament to work with and create line of business applications for customers.Honestly, I am really interested in your choice of 'weapons' for software development, and hopefully there might be some nice conversations in the comment section. Over the next coming days/weeks I'm going to describe a little bit more in detail about the reasons for my decision. Articles will be added bit by bit here as reference, too. Please bear with me... Regards, JoKi

  Read the article

• My Mother Bought a Droid

  - by Ben Griswold

  I converted to iPhone two years ago when I left my former employer and my Blackberry behind. The truth is I half-heartedly purchased my iPhone. It was a great looking device, but as far as I was concerned, it was a mere toy compared to my Blackberry.  I remember hiding the toy in my briefcase when attending business meetings because I didn’t consider it to be professional enough.  I’ve since owned all three generations of the iPhone and, well, iPhone seems to have caught on. I still miss the click of the Blackberry keyboard and the blinking red light letting me know that someone/something requires my attention, but I’m officially an iPhone fanboy now.  My mom called last weekend and asked if she should buy an iPhone. I talked her ear off about everything I love about iPhone. I went on for about twenty minutes. I couldn’t help myself. I mentioned everything from my podcast subscriptions to the application which manages my workouts.  I went as far as to say that someday all smart phones will be referred to as iPhones just like all tissues are referred to as Kleenex and all sodas are referred to as Cokes.  I was really on a roll and then I stopped. I had to…the call dropped.  There I was, strategically standing in the far corner of my backyard where I get the most reliable AT&T reception and the call drops in middle of my iPhone pitch.  Folks, I don’t care how good a salesperson you are, it’s tough to recover from a situation like this.   I dialed my mom back and jokingly asked if she was planning to make calls with her new phone. I explained that AT&T is bound to provide better service eventually but I’m not sure she should wait. After all, I have troubles with the network in San Diego and I can only image how bad it would be for her in Western Massachusetts. Mom called back a few days later exclaiming, “I bought a Droid! I love this phone! I haven’t done anything with it but make phone calls, but I love it.”  I had to laugh.  My mom made the right call (pun intended.)  The iPhone is an amazing device, but owners are constantly reminded that its core function (it’s a phone, remember?) is subpar.  If you love gadgets, you’re probably enthralled by iPhone’s many bells and whistles and, relatively speaking, the terrible phone service might not amount to much.  (Maybe it amounts to a rant on your blog.) The overall iPhone offering is so attractive that consumers are willing to wait for AT&T to straighten up their act or wait until Apple grants a choice of carriers.  But I don’t see either of these remedies coming soon. In the interim, I’m willing to take my iPhone for what it is and just continue to enjoy my favorite features while pretending that poor coverage isn’t a big deal. With any luck, more and more reasonable folks will recognize that Android Phones are legitimate players in the smart phone space, they will buy loads of them and there will become plenty of functional phones to borrow when my “phone” is showing zero bars.  Heck, I’m already covered when I visit my mom.

  Read the article

• Expression Studio 4 - without SketchFlow&hellip;

  - by mbcrump

  is kinda like an explosion with no “Ka-Boom”… I was excited to hear the news yesterday at Microsoft Teched that Expression Studio 4 had officially launched. MSDN subscribers could log in and download the full release. So, I logged into my MSDN account and started downloading Expression Studio 4 Premium thinking that I was only minutes away from trying out SketchFlow 4. To my dismay, I launched Blend 4 and noticed it did not say SketchFlow on the splash screen. So, I went to New Project and the template was not available. After some digging around on the net, I learned my premium MSDN subscription did not include SketchFlow and I would need to purchase the Ultimate Edition. Below is a excerpt directly from Microsoft: Q: What products are included in the Microsoft Expression Studio 4 Ultimate? A: Expression Studio 4 Ultimate is comprised of 4 products, Expression Web 4, Microsoft Expression Blend® 4 + SketchFlow, Expression Encoder 4 Pro and Expression Design 4. Expression Blend 4 includes SketchFlow in Expression Studio 4 Ultimate product only. Q: What products are included in the Microsoft Expression Studio 4 Premium? A: Expression Studio 4 Premium is comprised of 4 products, Expression Web 4, Microsoft Expression Blend 4, Expression Encoder 4 and Expression Design 4. Expression Studio 4 Premium is not available for retail purchase. Q: What products are included in the Microsoft Expression Studio 4 Web Professional? A: Expression Studio 4 Web Professional is comprised of 3 products, Expression Web 4, Expression Encoder 4 and Expression Design 4. As you can see, we got screwed on this deal and plenty of people are complaining: Kiran Says: 6.07.2010 at 5:07 PM No SketchFlow for Expression Studio 4 Premium? What a bumper for Microsoft Partners!! Martin Says: 6.07.2010 at 6:18 PM Why does Expression Professional Subscription not include upgrades and new releases of Expression Studio. Good question hey. I bought my subscription 5 days ago thinking I would get what i purchased but no Expression upgrades or new releases for me, what a waste of money. I think I am not the only long term user of this software that feels disgruntled. Sorry john just had to tell someone. shaggygi Says: 6.07.2010 at 7:31 PM SketchFlow NOT included in Studio 4? WTF! I repeat.... WT...Freaking.... F! This is totally unacceptable. My development team purchased VS 2010 Premium w/ MSDN with the impression by Adam Kinney, Scott Guthrie, etc. that this would be included in the Premium package or some sort of free upgrade. I understand this is a Marketing thing, but come on! I believe, at very least, this should have been explained in detail before this release. John Papa... as a rep to give feedback to the team... Please please and please.... tell powers-at-be to fix this problem. Sorry for the rant. Besides this issue, I believe it is a very good product:) Thanks Vaclav Elias Says: 6.08.2010 at 4:30 AM Well, I am also not happy that SketchFlow is only for the chosen ones :-) It is very nice product. Actually, kind of foundation for web development so they could really support any MSDN subscribers.. :-( I am hoping that Microsoft will make this right for all of us with MSDN premier subscriptions. In the meantime,  you can check out the 5 day training series available here.

  Read the article

• Oracle BI and XS Energy Drinks – Don’t Miss the Amway Presentation!

  - by Maria Forney

  Amway is a global leader in the direct sales industry with $10.9B in annual sales in more than 100 countries and territories. The company has implemented a global BI framework that provides accurate, consistent, and timely insights to support global, regional and local analytical research, business planning, performance measurement and assessment. Oracle BI EE is used by 1500 employees across Amway sales, marketing, finance, and supply chain business units as well as Amway affiliates in Europe, Russia, South Africa, Japan, Australia, Latin America, Malaysia, Vietnam, and Indonesia. Last week, I spoke with Lead Data Analyst with Amway Global Sales, Dan Arganbright, and IT Manager with Amway BI Competency Center, Mike Olson, about their upcoming presentation at Oracle OpenWorld in San Francisco. Scheduled during a prime speaking slot on Monday, October 1 at 12:15pm in Moscone West, 2007, Dan and Mike will discuss their experience building Amway’s Distributor Consulting solution, powered by Oracle BI EE. You can find more information here. As background, Amway offers people an opportunity to own their own businesses and consumers exclusive products in health and wellness, beauty and home care.  The Amway internal Sales organization is charged with consulting leadership-level Distributors to help them with data insights and ultimately grow their business. Until recently, this was a resource-intense process of gathering and formatting data. In some markets, it took over 40 hours to collect the data and produce the analysis needed for one consultation session. Amway began its global BI journey in 2006 and since then the company has migrated from having multiple technology providers and integration points to an integrated strategic vendor approach. Today, the company has standardized on Oracle technology for BI.  Amway has achieved cost savings through the retirement of redundant technology platforms. In addition, Mike’s organization has led the charge to align disparate BI organizations into a BI Competency Center.  The following diagram highlights the simplicity of the standardized architecture of Amway today. Dubbed Distributor Consulting, Amway has developed a BI solution using the Oracle technology stack to help Distributor leaders grow their businesses. The Distributor Consulting solution provides over 40 metrics for Sales staff to provide data-driven insights on the Distributors and organizations they support.  Using Oracle BI EE, Exadata, and Oracle Data Integrator, Amway provides customized and personalized business intelligence, and the Oracle BI EE dashboards were developed by the Amway Sales organization, which demonstrates business empowerment of the technology. Amway is also leveraging the power of BI to drive business growth in all of its markets.  A new set of Distributor Segmentation metrics are enabling a better understanding of distributor behaviors. A Global Scorecard that Amway developed provides key metrics at a market and global level for executive-level discussions. Product Analysis teams can now highlight repeat purchase rates, product penetration and the success of CRM campaigns. In the words of Dan and Mike, the addition of Exadata 11 months ago has been “a game changer.”  Amway has been able to dramatically reduce complexity, improve performance and increase business productivity and cost savings. For example, the number of indexes on the global data warehouse was reduced from more than 1,000 to less than 20.  Pulling data for the highest level distributors or the largest markets in the company now can be done in minutes instead of hours.  As a result, IT has shifted from performance tuning and keeping the system operational to higher-value business-focused activities. •       “The distributors that have been introduced to the BI reports have found them extremely helpful. Because they have never had this kind of information before, when they were presented with the reports, they wanted to take action immediately!”  -     Sales Development Manager in Latin America Without giving away more, the Amway case study presentation will be one of the unique customer sessions at OpenWorld this year. Speakers Dan Arganbright and Mike Olson have planned an interactive and entertaining session on Monday October 1 at 12:15pm in Moscone West, 2007. I’ll see you there!

  Read the article

• Oracle BI and XS Energy Drinks – Don’t Miss the Amway Presentation!

  - by Michelle Kimihira

  By Maria Forney Amway is a global leader in the direct sales industry with $10.9B in annual sales in more than 100 countries and territories. The company has implemented a global BI framework that provides accurate, consistent, and timely insights to support global, regional and local analytical research, business planning, performance measurement and assessment. Oracle BI EE is used by 1500 employees across Amway sales, marketing, finance, and supply chain business units as well as Amway affiliates in Europe, Russia, South Africa, Japan, Australia, Latin America, Malaysia, Vietnam, and Indonesia. Last week, I spoke with Lead Data Analyst with Amway Global Sales, Dan Arganbright, and IT Manager with Amway BI Competency Center, Mike Olson, about their upcoming presentation at Oracle OpenWorld in San Francisco. Scheduled during a prime speaking slot on Monday, October 1 at 12:15pm in Moscone West, 2007, Dan and Mike will discuss their experience building Amway’s Distributor Consulting solution, powered by Oracle BI EE. You can find more information here. As background, Amway offers people an opportunity to own their own businesses and consumers exclusive products in health and wellness, beauty and home care.  The Amway internal Sales organization is charged with consulting leadership-level Distributors to help them with data insights and ultimately grow their business. Until recently, this was a resource-intense process of gathering and formatting data. In some markets, it took over 40 hours to collect the data and produce the analysis needed for one consultation session. Amway began its global BI journey in 2006 and since then the company has migrated from having multiple technology providers and integration points to an integrated strategic vendor approach. Today, the company has standardized on Oracle technology for BI.  Amway has achieved cost savings through the retirement of redundant technology platforms. In addition, Mike’s organization has led the charge to align disparate BI organizations into a BI Competency Center.  The following diagram highlights the simplicity of the standardized architecture of Amway today. Dubbed Distributor Consulting, Amway has developed a BI solution using the Oracle technology stack to help Distributor leaders grow their businesses. The Distributor Consulting solution provides over 40 metrics for Sales staff to provide data-driven insights on the Distributors and organizations they support.  Using Oracle BI EE, Exadata, and Oracle Data Integrator, Amway provides customized and personalized business intelligence, and the Oracle BI EE dashboards were developed by the Amway Sales organization, which demonstrates business empowerment of the technology. Amway is also leveraging the power of BI to drive business growth in all of its markets.  A new set of Distributor Segmentation metrics are enabling a better understanding of distributor behaviors. A Global Scorecard that Amway developed provides key metrics at a market and global level for executive-level discussions. Product Analysis teams can now highlight repeat purchase rates, product penetration and the success of CRM campaigns. In the words of Dan and Mike, the addition of Exadata 11 months ago has been “a game changer.”  Amway has been able to dramatically reduce complexity, improve performance and increase business productivity and cost savings. For example, the number of indexes on the global data warehouse was reduced from more than 1,000 to less than 20.  Pulling data for the highest level distributors or the largest markets in the company now can be done in minutes instead of hours.  As a result, IT has shifted from performance tuning and keeping the system operational to higher-value business-focused activities. •       “The distributors that have been introduced to the BI reports have found them extremely helpful. Because they have never had this kind of information before, when they were presented with the reports, they wanted to take action immediately!”  -     Sales Development Manager in Latin America Without giving away more, the Amway case study presentation will be one of the unique customer sessions at OpenWorld this year. Speakers Dan Arganbright and Mike Olson have planned an interactive and entertaining session on Monday October 1 at 12:15pm in Moscone West, 2007. I’ll see you there!

  Read the article

• OWB 11gR2 &ndash; OLAP and Simba

  - by David Allan

  Oracle Warehouse Builder was the first ETL product to provide a single integrated and complete environment for managing enterprise data warehouse solutions that also incorporate multi-dimensional schemas. The OWB 11gR2 release provides Oracle OLAP 11g deployment for multi-dimensional models (in addition to support for prior releases of OLAP). This means users can easily utilize Simba's MDX Provider for Oracle OLAP (see here for details and cost) which allows you to use the powerful and popular ad hoc query and analysis capabilities of Microsoft Excel PivotTables® and PivotCharts® with your Oracle OLAP business intelligence data. The extensions to the dimensional modeling capabilities have been built on established relational concepts, with the option to seamlessly move from a relational deployment model to a multi-dimensional model at the click of a button. This now means that ETL designers can logically model a complete data warehouse solution using one single tool and control the physical implementation of a logical model at deployment time. As a result data warehouse projects that need to provide a multi-dimensional model as part of the overall solution can be designed and implemented faster and more efficiently. Wizards for dimensions and cubes let you quickly build dimensional models and realize either relationally or as an Oracle database OLAP implementation, both 10g and 11g formats are supported based on a configuration option. The wizard provides a good first cut definition and the objects can be further refined in the editor. Both wizards let you choose the implementation, to deploy to OLAP in the database select MOLAP: multidimensional storage. You will then be asked what levels and attributes are to be defined, by default the wizard creates a level bases hierarchy, parent child hierarchies can be defined in the editor. Once the dimension or cube has been designed there are special mapping operators that make it easy to load data into the objects, below we load a constant value for the total level and the other levels from a source table.   Again when the cube is defined using the wizard we can edit the cube and define a number of analytic calculations by using the 'generate calculated measures' option on the measures panel. This lets you very easily add a lot of rich analytic measures to your cube. For example one of the measures is the percentage difference from a year ago which we can see in detail below. You can also add your own custom calculations to leverage the capabilities of the Oracle OLAP option, either by selecting existing template types such as moving averages to defining true custom expressions. The 11g OLAP option now supports percentage based summarization (the amount of data to precompute and store), this is available from the option 'cost based aggregation' in the cube's configuration. Ensure all measure-dimensions level based aggregation is switched off (on the cube-dimension panel) - previously level based aggregation was the only option. The 11g generated code now uses the new unified API as you see below, to generate the code, OWB needs a valid connection to a real schema, this was not needed before 11gR2 and is a new requirement since the OLAP API which OWB uses is not an offline one. Once all of the objects are deployed and the maps executed then we get to the fun stuff! How can we analyze the data? One option which is powerful and at many users' fingertips is using Microsoft Excel PivotTables® and PivotCharts®, which can be used with your Oracle OLAP business intelligence data by utilizing Simba's MDX Provider for Oracle OLAP (see Simba site for details of cost). I'll leave the exotic reporting illustrations to the experts (see Bud's demonstration here), but with Simba's MDX Provider for Oracle OLAP its very simple to easily access the analytics stored in the database (all built and loaded via the OWB 11gR2 release) and get the regular features of Excel at your fingertips such as using the conditional formatting features for example. That's a very quick run through of the OWB 11gR2 with respect to Oracle 11g OLAP integration and the reporting using Simba's MDX Provider for Oracle OLAP. Not a deep-dive in any way but a quick overview to illustrate the design capabilities and integrations possible.

  Read the article

• Innovative SPARC: Lighting a Fire Under Oracle's New Hardware Business

  - by Paulo Folgado

  "There's a certain level of things you can do with commercially available parts," says Oracle Executive Vice President Mike Splain. But, he notes, you can do so much more if you design the parts yourself. Mike Splain,EVP, OracleYou can, for example, design cryptographic accelerators into your microprocessors so customers can run their networks fully encrypted if they choose.Of course, it helps if you've already built multiple processing "cores" into those chips so they can handle all that encrypting and decrypting while still getting their other work done.System on a ChipAs the leader of Oracle Microelectronics, Mike knows how implementing clever innovations in silicon can give systems a real competitive advantage.The SPARC microprocessors that his team designed at Sun pioneered the concept of multiple cores several years ago, and the UltraSPARC T2 processor--the industry's first "system on a chip"--packs up to eight cores per chip, each running as many as eight threads at once. That's the most cores and threads of any general-purpose processor. Looking back, Mike points out that the real value of large enterprise-class servers was their ability to run a lot of very large applications in parallel."The beauty of our CMT [chip multi-threading] machines is you can get that same kind of parallel-processing capability at a much lower cost and in a much smaller footprint," he says.The Whole StackWhat has Mike excited these days is that suddenly the opportunity to innovate is much bigger as part of Oracle."In my group, we used to look up the software stack and say, 'We can do any innovation we want, provided the only thing we have to change is what's in the Solaris operating system'--or maybe Java," he says. "If we wanted to change things beyond that, we'd have to go outside the walls of Sun and we'd have to convince the vendors: 'You have to align with us, you have to test with us, you have to build for us, and then you'll reap the benefits.' Now we get access to the entire stack. We can look all the way through the stack and say, 'Okay, what would make the database go faster? What would make the middleware go faster?'"Changing the WorldMike and his microelectronics team also like the fact that Oracle is not just any software company. We're #1 in database, middleware, business intelligence, and more."We're like all the other engineers from Sun; we believe we can change the world, if we can just figure out how to get people to pay attention to us," he says. "Now there's a mechanism at Oracle--much more so than we ever had at Sun."He notes, too, that every innovation in SPARC has involved some combination of hardware and softwareoptimization."Take our cryptography framework, for example. Sure, we can accelerate rapidly, but the Solaris OS has to provide the right set of interfaces that applications can tap into," Mike says. "Same thing with our multicore architecture. We have to have software that can utilize all those threads and run in parallel." His engineers, he points out, have never been interested in producing chips that sell as mere components."Our chips are always designed to go into systems and be combined with various pieces of software," he says. "Our job is to enable the creation of systems."

  Read the article

• Google TV Gets Bad Reception. Can Media Center Pull in the Signal?

  - by andrewbrust

  The news hit Monday morning that Google has decided to delay the release of its Google TV platform, and has asked its OEMs to delay any products that embed the software.  Coming just about two weeks prior to the 2011 Consumer Electronics Show (CES), Google’s timing is about the worst imaginable.  CES is where the platform should have had its coming out party, especially given all the anticipation that has built up since its initial announcement came 7 months ago. At last year’s CES, it seemed every consumer electronics company had fashioned its own software stack for Internet-based video programming and applications/widgets on its TVs, optical disc players and set top boxes.  In one case, I even saw two platforms on a single TV set (one provided by Yahoo and the other one native to the TV set). The whole point of Google TV was to solve this problem and offer a standard, embeddable platform.  But that won’t be happening, at least not for a while.  Google seems unable to get it together, and more proprietary approaches, like Apple TV, don’t seem to be setting the world of TV-Internet convergence on fire, either. It seems to me, that when it comes to building a “TV operating system,” Windows Media Center is still the best of a bad bunch.  But it won’t stay so for much longer without some changes.  Will Redmond pick up the ball that Google has fumbled?  I’m skeptical, but hopeful.  Regardless, here are some steps that could help Microsoft make the most of Google’s faux pas: Introduce a new Media Center version that uses XBox 360, rather than Windows 7 (or 8), as the platform.  TV platforms should be appliance-like, not PC-like.  Combine that notion with the runaway sales numbers for Xbox 360 Kinect, and the mass appeal it has delivered for Xbox, and the switch form Windows makes even more sense. As I have pointed out before, Microsoft’s Xbox implementation of its Mediaroom platform (announced and demoed at last year’s CES) gets Redmond 80% of the way toward this goal.  Nothing stops Microsoft from going the other 20%, other than its own apathy, which I hope has dissipated. Reverse the decision to remove Drive Extender technology from Windows Home Server (WHS), and create deep integration between WHS and Media Center.  I have suggested this previously as well, but the recent announcement that Drive Extender would be dropped from WHS 2.0 creates the need for me to a) join the chorus of people urging Microsoft to reconsider and b) reiterate the importance of Media Center-WHS integration in the context of a Google compete scenario. Enable Windows Phone 7 (WP7) as a Media Center client.  This would tighten the integration loop already established between WP7, Xbox and Zune.  But it would also counter Echostar/DISH Network/Sling Media, strike a blow against Google/Android (and even Apple/iOS) and could be the final strike against TiVO. Bring the WP7 user interface to Media Center and Kinect-enable it.  This would further the integration discussed above and would be appropriate recognition of WP7’s Metro UI having been built on the heritage of the original Media Center itself.  And being able to run your DVR even if you can’t find the remote (or can’t see its buttons in the dark) could be a nifty gimmick. Microsoft can do this but its consumer-oriented organization, responsible for Xbox, Zune and WP7, has to take the reins here, or none of this will likely work.  There’s a significant chance that won’t happen, but I won’t let that stop me from hoping that it does and insisting that it must.  Honestly, this fight is Microsoft’s to lose.

  Read the article

• Do NOT Change "Copy Local” project references to false, unless understand subsequences.

  - by Michael Freidgeim

  To optimize performance of visual studio build I've found multiple recommendations to change CopyLocal property for dependent dlls to false,e.g. From http://stackoverflow.com/questions/690033/best-practices-for-large-solutions-in-visual-studio-2008 CopyLocal? For sure turn this offhttp://stackoverflow.com/questions/280751/what-is-the-best-practice-for-copy-local-and-with-project-referencesAlways set the Copy Local property to false and enforce this via a custom msbuild stephttp://codebetter.com/patricksmacchia/2007/06/20/benefit-from-the-c-and-vb-net-compilers-perf/BenefitBenefitMy advice is to always set ‘Copy Local’ to falseSome time ago we've tried to change the setting to false, and found that it causes problem for deployment of top-level projects.Recently I've followed the suggestion and changed the settings for middle-level projects. It didn't cause immediate issues, but I was warned by Readify Consultant Colin Savage about possible errors during deploymentsI haven't undone the changes immediately and we found a few issues during testing.There are many scenarios, when you need to have Copy Local’ left to True.The concerns are highlighted in some stack overflow answers, but they have small number of votes.Top-level projects:  set copy local = true.First of all, it doesn't work correctly for top-level projects, i.e. executables or web sites.As pointed in the answer http://stackoverflow.com/a/6529461/52277for all the references in the one at the top set copy local = true.Alternatively you have to change output directory as it's described in http://www.simple-talk.com/dotnet/.net-framework/partitioning-your-code-base-through-.net-assemblies-and-visual-studio-projects/If you set ‘ Copy Local = false’, VS will, unless you tell it otherwise, place each assembly alone in its own .\bin\Debugdirectory. Because of this, you will need to configure VS to place assemblies together in the same directory. To do so, for each VS project, go to VS > Project Properties > Build tab > Output path, and set the Ouput path to ..\bin\Debugfor debug configuration, and ..\bin\Release for release configuration.Second-level  dependencies:  set copy local = true.Another example when copylocal =false fails on run-time, is when top level assembly doesn't directly referenced one of indirect dependencies.E..g. Top-level assembly A has reference to assembly B with copylocal =true, but assembly B has reference to assembly C with copylocal =false. Most likely assembly C will be missing on runtime and will cause errors E.g. http://stackoverflow.com/questions/602765/when-should-copy-local-be-set-to-true-and-when-should-it-not?lq=1Copy local is important for deployment scenarios and tools. As a general rule you should use CopyLocal=True and http://stackoverflow.com/questions/602765/when-should-copy-local-be-set-to-true-and-when-should-it-not?lq=1 Unfortunately there are some quirks and CopyLocal won't necessary work as expected for assembly references in secondary assemblies structured as shown below.MainApp.exe MyLibrary.dll ThirdPartyLibrary.dll (if in the GAC CopyLocal won't copy to MainApp bin folder)This makes xcopy deployments difficult . .Reflection called DLLs  dependencies:  set copy local = true.E.g user can see error "ISystem.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information."The fix for the issue is recommended in http://stackoverflow.com/a/6200173/52277"I solved this issue by setting the Copy Local attribute of my project's references to true."In general, the problems with investigation of deployment issues may overweight the benefits of reduced build time. Setting the Copy Local to false without considering deployment issues is not a good idea.

  Read the article

• Amazon Product Advertising API SOAP Namespace Changes

  - by Rick Strahl

  About two months ago (twowards the end of February 2012 I think) Amazon decided to change the namespace of the Product Advertising API. The error that would come up was: <ItemSearchResponse > was not expected. If you've used the Amazon Product Advertising API you probably know that Amazon has made it a habit to break the services every few years or so and I guess last month was about the time for another one. Basically the service namespace of the document has been changed and responses from the service just failed outright even though the rest of the schema looks fine. Now I looked around for a while trying to find a recent update to the Product Advertising API - something semi-official looking but everything is dated around 2009. Really??? And it's not just .NET - the newest thing on the sample/APIs is dated early 2011 and a handful of 2010 samples. There are newer full APIs for the 'cloud' offerings, but the Product Advertising API apparently isn't part of that. After searching for quite a bit trying to trace this down myself and trying some of the newer samples (which also failed) I found an obscure forum post that describes the solution of getting past the namespace issue. FWIW, I've been using an old version of the Product Advertising API using the old Microsoft WSE3 services (pre-WCF), which provides some of the WS* security features required by the Amazon service. The fix for this code is to explicitly override the namespace declaration on each of the imported service method signatures. The old service namespace (at least on my build) was: http://webservices.amazon.com/AWSECommerceService/2009-03-31 and it should be changed to: http://webservices.amazon.com/AWSECommerceService/2011-08-01 Change it on the class header:[Microsoft.Web.Services3.Messaging.SoapService("http://webservices.amazon.com/AWSECommerceService/2011-08-01")] [System.Xml.Serialization.XmlIncludeAttribute(typeof(Property[]))] [System.Xml.Serialization.XmlIncludeAttribute(typeof(BrowseNode[]))] [System.Xml.Serialization.XmlIncludeAttribute(typeof(TransactionItem[]))] public partial class AWSECommerceService : Microsoft.Web.Services3.Messaging.SoapClient { and on all method signatures:[Microsoft.Web.Services3.Messaging.SoapMethodAttribute("http://soap.amazon.com/ItemSearch")] [return: System.Xml.Serialization.XmlElementAttribute("ItemSearchResponse", Namespace="http://webservices.amazon.com/AWSECommerceService/2011-08-01")] public ItemSearchResponse ItemSearch(ItemSearch ItemSearch1) { Microsoft.Web.Services3.SoapEnvelope results = base.SendRequestResponse("ItemSearch", ItemSearch1); return ((ItemSearchResponse)(results.GetBodyObject(typeof(ItemSearchResponse), this.SoapServiceAttribute.TargetNamespace))); } It's easy to do with a Search and Replace on the above strings. Amazon Services <rant> FWIW, I've not been impressed by Amazon's service offerings. While the services work well, their documentation and tool support is absolutely horrendous. I was recently working with a customer on an old AWS application and their old API had been completely removed with a new API that wasn't even a close match. One old API call resulted in requiring three different APIs to perform the same functionality. We had to re-write the entire piece from scratch essentially. The documentation was downright wrong, and incomplete and so scattered it was next to impossible to follow. The examples weren't examples at all - they're mockups of real service calls with fake data that didn't even provide everything that was required to make same service calls work. Additionally there appears to be just about no public support from Amazon, only peer support which is sparse at best - and getting a hold of somebody at Amazon, even for pay seems to be mythical task. It's a terrible business model they have going. I can't see why anybody would put themselves through this sort of customer and development experience. Sad really, but an experience we see more and more these days. Nobody puts in the time to document anything anymore, leaving it to devs to figure this stuff out over and over again… </rant>© Rick Strahl, West Wind Technologies, 2005-2012Posted in CSharp  Web Services   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Beginner Geek: Scan a Document or Picture in Windows 7

  - by Mysticgeek

  There may come a time when you want to digitize your priceless old pictures, or need to scan a receipts and documents for your company. Today we look at how to scan a picture or document in Windows 7. Scanning Your Document In this example we’re using an HP PSC 1500 All-In-One printer connected to a Windows 7 Home Premium 32-bit system. Different scanners will vary, however the process is essentially the same. The scanning process has changed a bit since the XP days. To scan a document in Windows 7, place the document or picture in the scanner, click on Start, and go to Devices and Printers.   When the Devices and Printers window opens, find your scanning device and double-click on it to get the manufacturers Printer Actions menu. For our HP PSC 1500 we have a few different options like printing, device setup, and scanner actions. Here we’ll click on the Scan a document or photo hyperlink. The New Scan window opens and from here you can adjust the quality of the scanned image and choose the output file type. Then click the Preview button to get an idea of what the image will look like.   If you’re not happy with the preview, then you can go back and make any adjustments to the quality of the document or photo. Once everything looks good, click on the Scan button. The scanning process will start. The amount of time it takes will depend on your scanner type, and the quality of the settings you choose. The higher the quality…the more time it will take. You will have the option to tag the picture if you want to… Now you can view your scanned document or photo inside Windows Photo Viewer. If you’re happy with the look of the document, you can send it off in an email, put it on an network drive, FTP it… whatever you need to do with it. Another method is to place the document of photo you wish to scan in the scanner, open up Devices and Printers, then right-click on the scanning device and select Start Scan from the context menu. This should bypass the manufacturer screen and go directly into the New Scan window, where you can start the scan process. From the Context Menu you can also choose Scan Properties. This will allow you to test the scanner if you’re having problems with it and change some of its settings. Or you can choose Scan Profiles which allows you to use pre-selected settings, create your own, or set one as the default. Although scanning documents and photos isn’t a common occurrence as it was a few years ago, Windows 7 still includes the feature. When you need to scan a document or photo in Windows 7, this should get you started. Similar Articles Productive Geek Tips Easily Rotate Pictures In Word 2007Beginner Geek: Delete User Accounts in Windows 7Customize Your Welcome Picture Choices in Windows VistaSecure Computing: Detect and Eliminate Malware Using Windows DefenderMark Your Document As Final in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes

  Read the article

• BYOD is not a fashion statement; it’s an architectural shift - by Indus Khaitan

  - by Greg Jensen

  Ten years ago, if you asked a CIO, “how mobile is your enterprise?”. The answer would be, “100%, we give Blackberry to all our employees.”Few things have changed since then: 1.    Smartphone form-factors have matured, especially after the launch of iPhone. 2.    Rapid growth of productivity applications and services that enable creation and consumption of digital content 3.    Pervasive mobile data connectivityThere are two threads emerging from the change. Users are rapidly mingling their personas of an individual as well as an employee. In the first second, posting a picture of a fancy dinner on Facebook, to creating an expense report for the same meal on the mobile device. Irrespective of the dual persona, a user’s personal and corporate lives intermingle freely on a single hardware and more often than not, it’s an employees personal smartphone being used for everything. A BYOD program enables IT to “control” an employee owned device, while enabling productivity. More often than not the objective of BYOD programs are financial; instead of the organization, an employee pays for it.  More than a fancy device, BYOD initiatives have become sort of fashion statement, of corporate productivity, of letting employees be in-charge and a show of corporate empathy to not force an archaic form-factor in a world of new device launches every month. BYOD is no longer a means of effectively moving expense dollars and support costs. It does not matter who owns the device, it has to be protected.  BYOD brings an architectural shift.  BYOD is an architecture, which assumes that every device is vulnerable, not just what your employees have brought but what organizations have purchased for their employees. It's an architecture, which forces us to rethink how to provide productivity without comprising security.Why assume that every device is vulnerable? Mobile operating systems are rapidly evolving with leading upgrade announcement every other month. It is impossible for IT to catch-up. More than that, user’s are savvier than earlier.  While IT could install locks at the doors to prevent intruders, it may degrade productivity—which incentivizes user’s to bypass restrictions. A rapidly evolving mobile ecosystem have moving parts which are vulnerable. Hence, creating a mobile security platform, which uses the fundamental blocks of BYOD architecture such as identity defragmentation, IT control and data isolation, ensures that the sprawl of corporate data is contained. In the next post, we’ll dig deeper into the BYOD architecture. Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;}

  Read the article

• Increase the size of Taskbar Preview Thumbnails in Windows 7

  - by Matthew Guay

  Taskbar thumbnail previews are incredibly useful in Windows 7, but for some users they may be too small.  Here’s a tool to help you make your taskbar thumbnail previews just like you want them. A few years ago we featured a tool to increase the size of your thumbnail previews in Windows Vista, but unfortunately this application doesn’t work correctly in Windows 7.  However, there is a new tool for Windows 7 that lets you customize your taskbar thumbnail previews even more in Windows 7.  With it, you can change almost anything about your taskbar thumbnail previews.  The default taskbar thumbnails are nice, but may be too small for users with vision problems or with very high resolution monitors.  Whatever your need, this is a great tool to make the thumbnails looks and work just like you want. Let’s get started Download the Windows 7 Taskbar Thumbnail Customizer (link below), and unzip the files.  Run the Windows 7 Taskbar Thumbnail Customizer when you’re done.  Simply double-click on it; you don’t need to run it as administrator. Now, you change the size, spacing, margin, and delay time of your taskbar thumbnails.  The Delay Time setting is very handy; to speed things up, we set it to 0 so there’s no delay between when you mouse-over a taskbar icon to when you see the thumbnail.  Simply drag the slider to the size (or time in the delay settings) you want, and click Apply settings.  Windows Explorer will automatically restart, and your new taskbar thumbnails will be ready to use. Here is the default Windows 7 thumbnail preview of a video playing in Media player: And here’s the taskbar thumbnail enlarged to 380px.  Now you can really watch a video from your taskbar thumbnail. The larger taskbar thumbnails show up a little different in Internet Explorer.  It shows a larger preview of your active tab, and smaller previews of your other tabs.  Notice also that Aero peek shows the tab you’re hovering over in Internet Explorer, but the tab name in IE’s toolbar doesn’t change to the one you’re previewing.   Here we increased the width between the thumbnails, while keeping the thumbnails at their default size.  This could be useful if you have trouble selecting the correct preview, and we can imagine it would be a very useful modification on touch screens. And, if you ever take your changes too far, and want to revert to your default Windows 7 taskbar thumbnail previews, simply run the Customizer again and select Restore Defaults.  Windows Explorer will restart again, and your taskbar thumbnails will be back to their default settings.   Conclusion This tool makes it safe and easy to change the size, spacing, and more of your taskbar thumbnail previews.  And since you can always revert to the default settings, you can experiment without fear of messing up your computer.  If you’d prefer to change the settings manually without using a dedicated application, here’s a list of the registry changes you can make to accomplish this by hand. Link Download the Windows 7 Taskbar Thumbnail Customizer from The Windows Club Vista Users: Increase Size of Windows Vista Taskbar Previews Similar Articles Productive Geek Tips Bounty(Paid!) for Increasing Windows Vista Taskbar Preview SizeGet Vista Taskbar Thumbnail Previews in Windows XPVista Style Popup Previews for Firefox TabsIncrease Size of Windows Vista Taskbar PreviewsWhat is dwm.exe And Why Is It Running? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos

  Read the article

• Dude, what’s up with POP Forums vNext?

  - by Jeff

  Yeah, it has been awhile. I posted v9.2 back in January, about five months ago. That’s a real change from the release pace I had there for awhile. Let me explain what’s going on. First off, in the interim, I re-launched CoasterBuzz, which required a lot of my attention for about two of those months. That’s a good thing though, because that site is just about the best test bed I could ask for. The other thing is that I committed to make the next version use ASP.NET MVC 4, which is now at the RC stage. I didn’t think much about when they’d hit their RTW point, but RC is good enough for me. To that end, there is enough change in the next version that I recently decided to make it a major version upgrade, and finish up the loose ends and science projects to make it whole. Here’s what’s in store… Mobile views: I sat on this or a long time. Originally, I was going to use jQuery Mobile, and waited and waited for a new release, but in the end, decided against using it. Sometimes buttons would unexplainably not work, I felt like I was fighting it at times, and the CSS just felt too heavy. I rolled my own mobile sugar at a fraction of the size, and I think you’ll find it easy to modify. And it’s Metro-y, of course! Re-do of background services: A number of things run in the background, and I did quite a bit of “reimagining” of that code. It’s the weirdness of running services in a Web site context, because so many folks can’t run a bona fide service on their host’s box. The biggest change here is that these service no longer start up by default. You’ll need to call a new method from global.asax called PopForumsActivation.StartServices(). This is also a precursor to running the app in a Web farm (new data layer and caching is the second part of that). I learned about this the hard way when I had three apps using the forum library code but only one was actually the forum. The services were all running three times as often with race conditions and hits on the same data. That was particularly bad for e-mail. CSS clean up: It’s still not ideal, but it’s getting better. That’s one of those things that comes with integrating to a real site… you discover all of the dumb things you did. The mobile CSS is particularly easier to live with. Bug fixes: There are a whole lot of them. Most were minor, but it’s feeling pretty solid now. So that’s where I am. I’m going to call it v10.0, and I’m going to really put forth some effort toward finishing the mobile experience and getting through the remaining bugs. The roadmap beyond that will likely not be feature oriented, but rather work on some other things, like making it run in Azure, perhaps using SQL CE, a better install experience, etc. As usual, I’ll post the latest here. Stay tuned!

  Read the article

• I spy a Live Framework portal

  - by jamiet

  Those that have followed my blogs for a while may know that I have a slightly banal interest in Windows Live and, more specifically, the Live Services developer platform'; if that doesn’t sound interesting to you then stop reading now. My interest mainly stems from the Live Mesh technology that was announced a couple of years ago and the data synchronisation platform API that underpins it; that platform is called the Live Framework or LiveFX for short. At the Professional Developer’s Conference (PDC) 2008 Microsoft made LiveFX available to the public as a Tech Preview and I spent some time learning to use it and also built a few test apps on it too. In August 2009 an announcement came that that tech preview was getting shut down: "At the Professional Developer Conference 2008, we gave the developer community access to the technical preview of the Live Framework. The Live Framework is core to our vision of providing you with a consistent programming interface. Now we are working to integrate existing services, controls and the Live Framework into the next release of Windows Live. Your feedback continues to help us build the best possible offerings for Windows Live users, for you and for your customers. " Since then news on LiveFX has disappeared save for a throwaway session at PDC09 and I was hoping that news was going to appear at this week’s MIX conference but nothing was forthcoming. Instead though today I stumbled upon an unannounced portal for future LiveFX applications on Microsoft’s Azure portal at http://live.azure.com. Check it out: I consider this to be very good news. This Azure portal was built after the LiveFX tech preview was decommissioned so seeing Live Services existing so prominently alongside Microsoft’s other cloud efforts like Windows Azure and SQL Azure vindicates my early investment in the platform and gives me hope that we’re going to see something get released very very soon. I believe that the potential uses for this platform are extremely compelling and I’m looking forward to trying some out in the near future. I am also expecting LiveFX to have a heavy dependency on the OData protocol that I talked about yesterday in my post OData.org updated - gives clues about future sql azure enhancements so you can tell where my interest in that stems from. In case you’re wondering the projects that you see listed above (Basic List Sample, JT-proj etc…) are projects that I built on the old Tech Preview platform so clearly that stuff has not gone for good which is also good news; not just because it means I’ll have access to the code I wrote before but I also assume it means that LiveFX won’t have changed much since its tech preview incarnation. I know there are other LiveFX buffs out there and hopefully this news reaches some of them. If you are one of them the please put a comment below and let me know your thoughts! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Why is my machine unable to mount my SMB drives ("CIFS VFS: Error connecting to socket. Aborting operation", return code -115)?

  - by downbeat

  I have a machine running Precise (12.04 x64), and I cannot mount my SMB drives (I have 3, we'll call them public, private and download). It used to work (a week or two ago) and I didn't touch fstab! The machine hosting the shares is a commercial NAS, and I'm not seeing anything that would indicate it's an issue with the NAS. I have an older machine which I updated to Precise at the same time (both fresh installed, not dist-upgrade), so should have a very similar configuration. It is not having any problems. I am not having problems on windows machines/partitions either, only one of my Precise machines. The two machines are using identical entries in fstab and identical /etc/samba/smb.conf files. I don't think I've ever changed smb.conf (has never mattered before). My fstab entries all basically look like this: //10.1.1.111/public /media/public cifs credentials=/home/downbeat/.credentials,iocharset=utf8,uid=downbeat,gid=downbeat,file_mode=0644,dir_mode=0755 0 0 Here's the dmesg output on boot: [ 51.162198] CIFS VFS: Error connecting to socket. Aborting operation [ 51.162369] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.194106] CIFS VFS: Error connecting to socket. Aborting operation [ 51.194250] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.198120] CIFS VFS: Error connecting to socket. Aborting operation [ 51.198243] CIFS VFS: cifs_mount failed w/return code = -115 There are no other errors I see in the dmesg output. Originally when I ran 'testparm -s', the output contained these lines ERROR: lock directory /var/run/samba does not exist ERROR: pid directory /var/run/samba does not exist Here's the samba related programs I have installed: $ dpkg --list|grep -i samba ii libpam-winbind 2:3.6.3-2ubuntu2.3 Samba nameservice and authentication integration plugins ii libwbclient0 2:3.6.3-2ubuntu2.3 Samba winbind client library ii nautilus-share 0.7.3-1ubuntu2 Nautilus extension to share folder using Samba ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii samba-common 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii samba-common-bin 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii winbind 2:3.6.3-2ubuntu2.3 Samba nameservice integration server $ dpkg --list|grep -i smb ii dmidecode 2.11-4 SMBIOS/DMI table decoder ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix ii smbfs 2:5.1-1ubuntu1 Common Internet File System utilities - compatibility package $ dpkg --list|grep -i cifs ii cifs-utils 2:5.1-1ubuntu1 Common Internet File System utilities ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix I originally noticed that my other machine had "libpam-winbind" and "nautilus-share" installed and the machine with the issue did not. Installing those two packages solved my errors with 'testparm -s', but did not fix my issue. Finally, I tried to purge and reinstall these packages smbclient smbfs cifs-utils samba-common samba-common-bin Still no luck. Again, it used to work; now it doesn't. Very similarly configured machine works (but some packages are out of date on the working machine). The NAS has only one interface/IP address, nmblookup works to find it's IP from it's hostname (from the machine with the issue) and it responds to a ping. Please any help would be great. I've been searching on AskUbuntu, SuperUser, ubuntuforums and plain old search engines for a week now and it's driving me crazy!

  Read the article

• #MIX Day 2 Keynote: Put the Phone Down and Listen

  - by andrewbrust

  MIX day 1’s keynote was all about Windows Phone 7 (WP7).  MIX day 2’s was a reminder that Microsoft has much more going on than a new mobile platform.  Steven Sinofsky, Scott Guthrie, Doug Purdy and others showed us lots of other good things coming from Microsoft, mostly in the developer stack, that we certainly shouldn’t overlook.  These included the forthcoming IE9, its new JavaScript compiling engine and support for HTML 5 that takes full advantage of the local PC resources, including the Graphics Processing Unit.  The announcements also included important additions to ASP.NET (and one subtraction, in the form of lighter-weight ViewState technology) including almost-obsessive jQuery support.  That support is so good that John Resig, creator of the jQuery project, came on stage to tell us so.  Then Scott Guthrie told us that Microsoft would be contributing code to Open Source jQuery project. This is not your father’s Microsoft, it would seem. But to me, the crown jewel in today’s keynote were the numerous announcements around the Open Data Protocol (OData).  OData is nothing more than the protocol side of “Astoria” (now known as WCF Data Services, and until recently called ADO.NET Data Services) separated out and opened up as a platform-neutral standard.  The 2009 Professional Developers Conference (PDC) was Microsoft’s vehicle for first announcing OData, as well as project “Dallas,” an Azure-based cloud platform for publishing commercial OData feeds.  And we had already known about “bridges” for Astoria (and thus OData) for PHP and Java.  We also knew that PowerPivot, Microsoft’s forthcoming self-service BI plug-in for Excel 2010, will consume OData feeds and then facilitate drill-down analysis of their data.  And we recently found out that SQL Reporting Services reports (in the forthcoming SQL Server 2008 R2) and SharePoint 2010 lists will be consumable in OData format as well. So what was left to announce?  How about OData clients for Palm webOS and Apple iPhone/Objective C?  How about the release to Open Source of .NET’s OData client?  Or the ability to publish any SQL Azure database as an OData service by simply checking a checkbox at deployment?  Maybe even a Silverlight tool (code-named “Houston”) to create SQL Azure databases (and then publish them as OData) right in the browser?  And what if you you could get at NetFlix’s entire catalog in OData format?  You can – just go to http://odata.netflix.com/Catalog/ and see for yourself.  Douglas Purdy, who made these announcements said “we want OData to work on as many devices and platforms as possible.”  After all the cross-platform OData announcements made in about a half year’s time, it’s hard to dispute this. When Microsoft plays the data card, and plays it well, watch out, because data programmability is the company’s heritage.  I’ll be discussing OData at length in my April Redmond Review column.  I wrote that column two weeks ago, and was convinced then that OData was a big deal. Today upped the ante even more.  And following the Windows Phone 7 euphoria of yesterday was, I think, smart timing.  The phone, if it’s successful, will be because it’s a good developer platform play.  And developer platforms (as well as their creators) are most successful when they have a good data strategy.  OData is very Silverlight-friendly, and that means it’s WP7-friendly too.  Phone plus service-oriented data is a one-two punch.  A phone platform without data would have been a phone with no signal.

  Read the article

• Don&rsquo;t Kill the Password

  - by Anthony Trudeau

  A week ago Mr. Honan from Wired.com penned an article on security he titled “Kill the Password: Why a String of Characters Can’t Protect Us Anymore.” He asserts that the password is not effective and a new solution is needed. Unfortunately, Mr. Honan was a victim of hacking. As a result he has a victim’s vendetta. His conclusion is ill conceived even though there are smatterings of truth and good advice. The password is a security barrier much like a lock on your door. In of itself it’s not guaranteeing protection. You can have a good password akin to a steel reinforced door with the best lock money can buy, or you can have a poor password like “password” which is like a sliding lock like on a bathroom stall. But, just like in the real world a lock isn’t always enough. You can have a lock, security system, video cameras, guard dogs, and even armed security guards; but none of that guarantees your protection. Even top secret government agencies can be breached by someone who is just that good (as dramatized in movies like Mission Impossible). And that’s the crux of it. There are real hackers out there that are that good. Killer coding ninja monkeys do exist! We still have locks on our doors, because they still serve their role. Passwords are no different. Security doesn’t end with the password. Most people would agree that stuffing your mattress with your life savings isn’t a good idea even if you have the best locks and security system. Most people agree its safest to have the money in a bank. Essentially this is compartmentalization. Compartmentalization extends to the online world as well. You’re at risk if your online banking accounts are linked to the same account as your social networks. This is especially true if you’re lackadaisical about linking those social networks to outside sources including apps. The object here is to minimize the damage that can be done. An attacker should not be able to get into your bank account, because they breached your Twitter account. It’s time to prioritize once you’ve compartmentalized. This simply means deciding how much security you want for the different compartments which I’ll call security zones. Social networking applications like Facebook provide a lot of security features. However, security features are almost always a compromise with privacy and convenience. It’s similar to an engineering adage, but in this case it’s security, convenience, and privacy – pick two. For example, you might use a safe instead of bank to store your money, because the convenience of having your money closer or the privacy of not having the bank records is more important than the added security. The following are lists of security do’s and don’ts (these aren’t meant to be exhaustive and each could be an article in of themselves): Security Do’s: Use strong passwords based on a phrase Use encryption whenever you can (e.g. HTTPS in Facebook) Use a firewall (and learn to use it properly) Configure security on your router (including port blocking) Keep your operating system patched Make routine backups of important files Realize that if you’re not paying for it, you’re the product Security Don’ts Link accounts if at all possible Reuse passwords across your security zones Use real answers for security questions (e.g. mother’s maiden name) Trust anything you download Ignore message boxes shown by your system or browser Forget to test your backups Share your primary email indiscriminately Only you can decide your comfort level between convenience, privacy, and security. Attackers are going to find exploits in software. Software is complex and depends on other software. The exploits are the responsibility of the software company. But your security is always your responsibility. Complete security is an illusion. But, there is plenty you can do to minimize the risk online just like you do in the physical world. Be safe and enjoy what the Internet has to offer. I expect passwords to be necessary just as long as locks.

  Read the article

• Introducing functional programming constructs in non-functional programming languages

  - by Giorgio

  This question has been going through my mind quite a lot lately and since I haven't found a convincing answer to it I would like to know if other users of this site have thought about it as well. In the recent years, even though OOP is still the most popular programming paradigm, functional programming is getting a lot of attention. I have only used OOP languages for my work (C++ and Java) but I am trying to learn some FP in my free time because I find it very interesting. So, I started learning Haskell three years ago and Scala last summer. I plan to learn some SML and Caml as well, and to brush up my (little) knowledge of Scheme. Well, a lot of plans (too ambitious?) but I hope I will find the time to learn at least the basics of FP during the next few years. What is important for me is how functional programming works and how / whether I can use it for some real projects. I have already developed small tools in Haskell. In spite of my strong interest for FP, I find it difficult to understand why functional programming constructs are being added to languages like C#, Java, C++, and so on. As a developer interested in FP, I find it more natural to use, say, Scala or Haskell, instead of waiting for the next FP feature to be added to my favourite non-FP language. In other words, why would I want to have only some FP in my originally non-FP language instead of looking for a language that has a better support for FP? For example, why should I be interested to have lambdas in Java if I can switch to Scala where I have much more FP concepts and access all the Java libraries anyway? Similarly: why do some FP in C# instead of using F# (to my knowledge, C# and F# can work together)? Java was designed to be OO. Fine. I can do OOP in Java (and I would like to keep using Java in that way). Scala was designed to support OOP + FP. Fine: I can use a mix of OOP and FP in Scala. Haskell was designed for FP: I can do FP in Haskell. If I need to tune the performance of a particular module, I can interface Haskell with some external routines in C. But why would I want to do OOP with just some basic FP in Java? So, my main point is: why are non-functional programming languages being extended with some functional concept? Shouldn't it be more comfortable (interesting, exciting, productive) to program in a language that has been designed from the very beginning to be functional or multi-paradigm? Don't different programming paradigms integrate better in a language that was designed for it than in a language in which one paradigm was only added later? The first explanation I could think of is that, since FP is a new concept (it isn't new at all, but it is new for many developers), it needs to be introduced gradually. However, I remember my switch from imperative to OOP: when I started to program in C++ (coming from Pascal and C) I really had to rethink the way in which I was coding, and to do it pretty fast. It was not gradual. So, this does not seem to be a good explanation to me. Or can it be that many non-FP programmers are not really interested in understanding and using functional programming, but they find it practically convenient to adopt certain FP-idioms in their non-FP language? IMPORTANT NOTE Just in case (because I have seen several language wars on this site): I mentioned the languages I know better, this question is in no way meant to start comparisons between different programming languages to decide which is better / worse. Also, I am not interested in a comparison of OOP versus FP (pros and cons). The point I am interested in is to understand why FP is being introduced one bit at a time into existing languages that were not designed for it even though there exist languages that were / are specifically designed to support FP.

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >