Search Results

Search found 33182 results on 1328 pages for 'linux port'.

Page 177/1328 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

  • Adding third disk as a single disk in a server with an existing RAID1

    - by slowhandsolo
    I've got a ProLiant DL360 G5 server (Fedora 13) with two SAS disks in a hardware RAID 1, working fine. Now I hot plugged another SAS disk. I'd like to configure this new hard disk out of my RAID, as a single non-RAID disk (ex. /dev/sdb). Even after rebooting the server, I can't see the new disk with "fdisk -l". It displays only my hardware RAID, but not the new disk. [root@myserver]# fdisk -l Disco /dev/cciss/c0d0: 300.0 GB, 299966445568 bytes Disposit. Inicio Comienzo Fin Bloques Id Sistema /dev/cciss/c0d0p1 * 1 126 512000 83 Linux /dev/cciss/c0d0p2 126 71798 292422656 8e Linux LVM Disco /dev/dm-0: 234.9 GB, 234881024000 bytes Disco /dev/dm-1: 10.5 GB, 10536091648 bytes Disco /dev/dm-2: 21.0 GB, 20971520000 bytes Disco /dev/dm-3: 31.5 GB, 31474057216 bytes Disco /dev/dm-4: 1577 MB, 1577058304 bytes However, I can see the new disk using the HP Array Configuration Utility CLI for Linux "hpacucli": [root@myserver]# hpacucli => controller slot=0 physicaldrive all show status physicaldrive 1I:1:1 (port 1I:box 1:bay 1, 300 GB): OK physicaldrive 1I:1:2 (port 1I:box 1:bay 2, 300 GB): OK physicaldrive 1I:1:3 (port 1I:box 1:bay 3, 300 GB): OK => controller slot=0 pd all show detail Smart Array P400i in Slot 0 (Embedded) array A physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 **unassigned** physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: **Unassigned Drive** As you can see, I've got two SAS disks in a RAID 1 and the new disk as "unassigned". Is there any way to work with the new disk as another non-RAID single disk? If relevant, I want to create a new partition in my new disk, format it with mkfs and mount it, but as I can't see it with fdisk, I don't know how to do it. Thanks!

    Read the article

  • Linux ciblé par un mystérieux Rootkit infectant des sites Web par injection d'iFrame

    Linux ciblé par un mystérieux Rootkit infectant des sites Web par injection d'iFrame Des chercheurs en sécurité ont découvert un nouveau Rootkit ciblant les plateformes Linux. Le 13 novembre dernier, un propriétaire de site Web agacé par le comportement d'un programme poste sur le mailing-list Full Disclosure celui-ci afin d'obtenir des clarifications sur son rôle. Les experts en sécurité de Kaspersky et CrowdStrike ont confirmé par la suite qu'il s'agit d'un Rootkit conçu pour attaquer les systèmes d'exploitation Linux 64 bit, plus précisément la dernière version du kernel utilisée dans Debian Squeezy. D'un code relativement simple et encore en phase d'exp...

    Read the article

  • Oracle Linux 6.3 RPMs Now Available

    - by Sergio
    The installation media ISO for Oracle Linux 6.3 is still "in the oven" but the RPMs are already available.  You can grab them on ULN, if you have an Oracle Linux support subscription, or anyone can get them from public-yum.oracle.com.  Oracle Linux 6.3 includes a quarterly update of Unbreakable Enterprise Kernel Release 2 (kernel-uek-2.6.39-200.9.0.el6uek).  To install that kernel, make sure you have the ol6_UEK_latest channel or repo enabled.  Enjoy.

    Read the article

  • New user to Linux Mint and Alinux

    - by Richard
    which is better for a new Linux user, Linux Mint or Alinux i had trouble getting Alinux to run after install Mint ran fine. We are also with the Tucson Refugee ministry and we have computers given to us all the time then we reload the OS clean it up then we give them to the refugee families. We need something that will run on older computers with 256 or 512m of ram, and i do not want to use Micro Soft Please help. PS is there any other Linux OS you would recommend?????? Thanks Richard Smith [email protected]

    Read the article

  • Linux Programmer moving to Windows

    - by cytinus
    I am a fairly proficient Linux programmer. I have been coding in Linux for 4 years, for both personal reasons and for profit. During those 4 years I have not even owned a computer running the Windows operating system. I am looking to expand my horizons into Windows programming, but am finding myself overwhelmed with the lack of what I perceive to be standardization. I feel as though different compilers follow different conventions, and all of the worthwhile IDEs cost money. Whats worse is that so many of the Tutorials are just terrible. If anyone else has taken the switch from Linux to Windows programming, what was the most helpful. What are the most straightforward IDEs and tutorials for using the API. I am looking to do mainly C and C++ development, along with some x86. I have found MASM primarily suits my needs for the latter.

    Read the article

  • La Russie abandonne les logiciels propriétaires pour Linux et équipera ses organismes de solutions libres

    La Russie abandonne les logiciels propriétaires pour Linux et équipera ses organismes de solutions libres Après la gendarmerie française en 2010, c'est le gouvernement Russe qui fait allégeance à Linux. En effet, le premier Ministre du pays -Vladimir Poutine- n'a pas reconduit les contrats qui liaient les organismes officiels de Russie à Microsoft. Ainsi, à partir de 2011, les institutions nationales vont entamer une migration vers le libre : pour leurs solutions logicielles (celles en place seront recensées puis la manière de les remplacer en libre sera évaluée), mais aussi au niveau des systèmes d'exploitation. Les distributions Linux remplaceront donc Windows, et dans ce domaine, il semblerait que la transition s...

    Read the article

  • ?Linux 6???UDEV??RAC ASM???????

    - by Liu Maclean(???)
    Maclean?????UDEV??ASMLIB?RAC???????????,???????????????????:Why ASMLIB and why not???UDEV????RAC ASM?????  ?«??UDEV????RAC ASM????? »???????????????,????????udev rule????: for i in b c d e f g h i j k ; do echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id -g -u -s %p\", RESULT==\"`scsi_id -g -u -s /block/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" done ?????Linux 5?????, ????????redhat/Oracle Linux 6???????????? ????: ?OEL6??RHEL6?,????????? ??????:1. scsi_id??????????,scsi_id -g -u -s??????????2. udevtest???????,????udevadm??How to use udev for Oracle ASM in Oracle Linux 6   ???????????,???redhat/Oracle Linux 6??????udev rule ????: 1. #????? Linux 6.0???? [root@vrh6 dev]# cat /etc/issue Oracle Linux Server release 6.2 Kernel \r on an \m 2. #?????/etc/scsi_id.config echo "options=--whitelisted --replace-whitespace" >> /etc/scsi_id.config 3. #?????????udev?? [root@vrh6 dev]# ls -l sd* brw-rw----. 1 root disk 8, 0 Jun 30 09:29 sda brw-rw----. 1 root disk 8, 1 Jun 30 09:29 sda1 brw-rw----. 1 root disk 8, 2 Jun 30 09:29 sda2 brw-rw----. 1 root disk 8, 16 Jun 30 09:29 sdb brw-rw----. 1 root disk 8, 32 Jun 30 09:29 sdc brw-rw----. 1 root disk 8, 48 Jun 30 09:29 sdd brw-rw----. 1 root disk 8, 64 Jun 30 09:29 sde brw-rw----. 1 root disk 8, 80 Jun 30 09:29 sdf ??????? sdb-> sdf???????? 4. ? b->f?????for ???,??: # AUTO UDEV RULE BY Maclean Liu 2012/06/30 for i in b c d e f ; do echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" done ????sdb->sdf ?????RULE,????RULE???/etc/udev/rules.d/99-oracle-asmdevices.rules? ??????????? ,??RULE?99-oracle-asmdevices.rules # AUTO UDEV RULE BY Maclean Liu 2012/06/30 for i in b c d e f ; do echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules done 5. ?????root??/sbin/start_udev ?? ??????: [root@vrh6 dev]# echo "options=--whitelisted --replace-whitespace" >> /etc/scsi_id.config [root@vrh6 dev]# for i in b c d e f ; > do > echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules > done [root@vrh6 dev]# [root@vrh6 dev]# cat /etc/udev/rules.d/99-oracle-asmdevices.rules KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB09cadb31-cfbea255", NAME="asm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB5f097069-59efb82f", NAME="asm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB4e1a81c0-20478bc4", NAME="asm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBdcce9285-b13c5a27", NAME="asm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB82effe1a-dbca7dff", NAME="asm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660" [root@vrh6 dev]# [root@vrh6 dev]# /sbin/start_udev Starting udev: [ OK ] [root@vrh6 dev]# ls -l asm* brw-rw----. 1 grid asmadmin 8, 16 Jun 30 09:34 asm-diskb brw-rw----. 1 grid asmadmin 8, 32 Jun 30 09:34 asm-diskc brw-rw----. 1 grid asmadmin 8, 48 Jun 30 09:34 asm-diskd brw-rw----. 1 grid asmadmin 8, 64 Jun 30 09:34 asm-diske brw-rw----. 1 grid asmadmin 8, 80 Jun 30 09:34 asm-diskf

    Read the article

  • How can I simulate all mouse and keyboard events in Qt that works on Linux and Windows?

    - by S.Mohammadi
    Problem: I have a device that send to me some commands (e.g: 1,2,3,...), i want simulate mouse and keyboard events according to received commands in Both Linux OS and Windows OS. I worked with bool QCoreApplication::postEvent(QObject *receiver, QEvent *event, int priority = Qt::NormalEventPriority) but i don't know what receiver pass to it and i has problem with MouseMove action with it. I found this help that works good in linux OS, but i have problem with this help approach in Windows OS. Is there any approach that works in both OS? Thanks for your attention.

    Read the article

  • question about that concept of linux install in flash card.

    - by Johnny
    1.i can't understand why Linux on flash card need install, does it simply copy certain file to certain location in flash card? ---i mean ,plan it in a response file,then one program read the plan in response file and write certain format to flash card. 2.does the file system bind tiedly to the linux kernel? is it possible let each kernel,user,app have its own root? rather than mount everything under one single / "root"

    Read the article

  • How do I create a DSN for ODBC in Linux?

    - by deadprogrammer
    I am digging around in a Linux application that supposedly uses DSNs to connet to SQL Server. The connection stopped working and I can't find the credentials that are being used (all I know is the DSN's name). I am familiar with DSNs in Windows, but how are they created and where are they stored in Linux?

    Read the article

  • How Linux programmers create GUI application without using IDE?

    - by CMW
    Hi, I have read some comments in some forums saying that Linux programmers usually do not use any IDE. They prefer to use Vim and Emacs to do their programming. If I'm not mistaken, Vim and Emacs are just text editors, similar to notepad, but with syntax highlighting. I just want to know how Linux programmers create complicated GUI application without using any IDE. Thanks.

    Read the article

  • which linux flavour should I use to for my hosting server?

    - by rabbit
    Hi, We plan to host our website on a linux server. The site is created using java based technologies and will run on multiple instances of tomcat with apache in the front. I want to go in for a 64 bit linux OS so that I can install 64bit jvm. So my options are : Ubuntu Fedora CentOS which one (and which version) would be the most stable?

    Read the article

  • How early can I call kalloc in an arm linux kernel?

    - by Isaac Sutherland
    I would like to dynamically allocate memory from the machine_init function in my arm linux kernel. Calling kalloc can result in a complete failure of the system to boot. My debugging tools are very limited so I can't give much more information regarding the failure. Simply put, is it legal to call kalloc from a machine_init function in arm linux, and, if not, is there an alternative?

    Read the article

  • What's the best editor/program for g++ in Linux?

    - by Phenom
    So far I've been using vi, but I'm wondering if there's something better to use in Linux. In Windows there's Visual C++, and I guess practically all C++ programmers in Windows use this these days. It has a lot of things in it to help the programmer. What about for Linux?

    Read the article

  • What are the common Linux commands for SAN-related activities? How do I check if a LUN is attached to the computer?

    - by Nishant
    How do I check if a LUN has been presented to my server? What are the Linux commands for that? Do the LUNs show up in a fdisk -l command like a normal /dev/sda gets listed? What are other commands associated with general SAN related checks in Linux? What is WWN and how does that have any relevance? If we have LUNs, what is the use of multipathing? Bit lengthy but I am not able to get a grasp on the topic. Any help would be appreciated.

    Read the article

  • What are the common linux ( RH ) commands for SAN related activities ? How to check if a LUN is attached to the computer ?

    - by Nishant
    How do I check if a LUN has been presented to my server ? What are the Linux commands for that ? Do the LUNS show up in a fdisk -l command like a normal /dev/sda gets listed ? What are other commands assosicaed with general SAN related checks in Linux ? What is WWN and how does that have any relevance and Also please explain multipathing why if we have LUN's , what is the use of multipathing then ? Bit lenghty but I am not able to get a grasp on the topic . Any help would be appreciated .

    Read the article

  • Connecting to MSP430 via /dev/ttyACM0

    - by speciousfool
    I'd like some suggestions about how to fix garbled serial output from a device connected on /dev/ttyACM0. Lately I've been working on a development project making use of TI's MSP430 microcontroller (specifically the eZ430-RF2560). Over on this thread you can see we've been testing some code and have found that the output of the microcontroller over serial is garbled. The btstack provides simple counter test program. When we run the program and look at the serial port output using PuTTY on Windows 7 we see: rfcomm_send_internal cid 117 doesn't exist! BTstack counter 26230 rfcomm_send_internal cid 117 doesn't exist! BTstack counter 26231 However if we connect from various Ubuntu clients we get something like: Stt.R. BTacn 0 BTacn 002BTacn 0 BTcct 04BTtacoe 5BTacun My current belief is that this is because the device is being detected by cdc_acm as a generic USB ACM device. Another thread about a similar microcontroller suggests that the device should use a specific usb serial driver. We've verified that the module is compiled on our system and did a "modprobe ti_usb_3410_5052" but this had no effect on cdc_acm. Here is the relevant section of the kernel's debug log: [ 2735.092987] usb 2-1.2: new full speed USB device number 5 using ehci_hcd [ 2735.213655] cdc_acm 2-1.2:1.0: This device cannot do calls on its own. It is not a modem. [ 2735.213669] cdc_acm 2-1.2:1.0: No union descriptor, testing for castrated device [ 2735.213720] cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device [ 2745.241996] generic-usb 0003:0451:F432.0003: usb_submit_urb(ctrl) failed [ 2745.242023] generic-usb 0003:0451:F432.0003: timeout initializing reports [ 2745.242401] generic-usb 0003:0451:F432.0003: hiddev0,hidraw0: USB HID v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on usb-0000:00:1d.0-1.2/input1 So, in summary, we'd like to figure out how to properly connect to this device. Also of use may be the appropriate place to file a bug report.

    Read the article

  • Using Linux LVM, can I change the number of stripes and "rebalance" the logical volume?

    - by mss
    I created a RAID10 by adding two RAID1 md devices as physical volumes to a volume group. Unfortunately it looks like I forgot to specify the number of stripes when I created the logical volumes (it was late): PV VG Fmt Attr PSize PFree /dev/md312 volume lvm2 a- 927.01G 291.01G /dev/md334 volume lvm2 a- 927.01G 927.01G I know that I can move all the data of a logical volume from one physical volume to another with pvmove. It also looks like lvextend supports an -i switch to change the number of stripes. Is there any way to combine these two, ie. change the number of stripes and "rebalance" the data over the stripes based on the allocation policy? According to this mail by Ross Walker from March 2010 it isn't possible but maybe this has changed since then.

    Read the article

  • How to setup linux permissions for the WWW folder?

    - by Xeoncross
    Updated Summery The /var/www directory is owned by root:root which means that no one can use it and it's entirely useless. Since we all want a web server that actually works (and no-one should be logging in as "root"), then we need to fix this. Only two entities need access. PHP/Perl/Ruby/Python all need access to the folders and files since they create many of them (i.e. /uploads/). These scripting languages should be running under nginx or apache (or even some other thing like FastCGI for PHP). The developers How do they get access? I know that someone, somewhere has done this before. With however-many billions of websites out there you would think that there would be more information on this topic. I know that 777 is full read/write/execute permission for owner/group/other. So this doesn't seem to be needed as it leaves random users full permissions. What permissions are need to be used on /var/www so that... Source control like git or svn Users in a group like "websites" (or even added to "www-data") Servers like apache or lighthttpd And PHP/Perl/Ruby can all read, create, and run files (and directories) there? If I'm correct, Ruby and PHP scripts are not "executed" directly - but passed to an interpreter. So there is no need for execute permission on files in /var/www...? Therefore, it seems like the correct permission would be chmod -R 1660 which would make all files shareable by these four entities all files non-executable by mistake block everyone else from the directory entirely set the permission mode to "sticky" for all future files Is this correct? Update: I just realized that files and directories might need different permissions - I was talking about files above so i'm not sure what the directory permissions would need to be. Update 2: The folder structure of /var/www changes drastically as one of the four entities above are always adding (and sometimes removing) folders and sub folders many levels deep. They also create and remove files that the other 3 entities might need read/write access to. Therefore, the permissions need to do the four things above for both files and directories. Since non of them should need execute permission (see question about ruby/php above) I would assume that rw-rw-r-- permission would be all that is needed and completely safe since these four entities are run by trusted personal (see #2) and all other users on the system only have read access. Update 3: This is for personal development machines and private company servers. No random "web customers" like a shared host. Update 4: This article by slicehost seems to be the best at explaining what is needed to setup permissions for your www folder. However, I'm not sure what user or group apache/nginx with PHP OR svn/git run as and how to change them. Update 5: I have (I think) finally found a way to get this all to work (answer below). However, I don't know if this is the correct and SECURE way to do this. Therefore I have started a bounty. The person that has the best method of securing and managing the www directory wins.

    Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >