Search Results

Search found 5723 results on 229 pages for 'turing machines'.

Page 177/229 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• Outside VPN traffic not able to ping site-to-site VPN remote site

  - by Siriss

  we have two ASA 5510s running 8.4 in a site-to-site VPN setup. All internal traffic is working smoothly. Site/Subnet A: 192.100.0.0 - local Site/Subnet B: 192.200.0.0 - remote VPN Users: 192.100.40.0 - assigned by ASA When you VPN into the network, all traffic hits Site A, and everything on subnet A is accessible. Site B however, is completely inaccessible for VPN users. All machines on subnet B, the firewall itself, etc... is not reachable by ping or otherwise. I know I am missing a NAT rule, and in 8.2, it was easy as pie to setup using ASDM, but now I can't get it for the life of me as 8.4 apparently made a lot of changes to NAT rules. I am not too comfortable in the ASA command line, but if there is a command I need to add or if you could direct me where I can add this in 8.4 ASDM I would really appreciate it. I have tired NAT Exempt, Static NAT, Static NAT Policies, etc... I think I tried all the options. I also might have my interfaces confused with the new look at feel of ASDM. Thank you much in advance and I hope I have been thorough enough.

  Read the article

• Update BIOS on Sun Fire X4150 server

  - by Massimo

  I have some Sun Fire X4150 servers with a very old BIOS release (1ADQW015), which seems to have some compatibility problems with WMware ESX Server 3.5 and Windows 2008 R2 virtual machines; so I want to update the BIOS on them. The problem: according to this page, if your servers run ELOM (mine do), you first need to update to the latest ELOM release, then to the interim transition release, then finally you can update to the latest one. Ok, I'm willing to do that... but it looks like Sun (now Oracle) will happily let you download the latest firmware DVD (3.3.0), but it will not let you download the transition release (2.0) if you don't have a support contract. Well, I actuall don't care at all about the servers' management controllers (we don't even use them), so upgrading from ELOM to ILOM is totally irrelevant to me; but I need to update the servers' BIOS. So my question is: can I update the servers' BIOS to the latest version without doing the full ELOM-to-ILOM migration, or will this not work (or even make the servers unusable)? Do BIOS versions and SP ones need to be matched, or can one be updated without bothering with the other? Bonus question: if this whole ELOM-to-ILOM thing actually is needed in order to update the BIOS, can that 2.0 CD-ROM be obtained without having a support contract with Sun/Oracle (which we are definitely not going to sign, being that quite old hardware)? Update: I tried upgrading only the BIOS on one of the servers, and it didn't boot anymore. So it really looks like a full firmware upgrade is needed, and the management controller and BIOS versions should be kept in sync. So... where can I find that *&!£%$% 2.0 CD-ROM? Or at least the transition firmware that can be found on it?

  Read the article

• Repairing Damage to VMWare Virtual Disk

  - by Lachlan McDonald

  Evening all, I've got a considerable problem I'm hoping to get some resolution on. I had two VMWare 6.5 virtual machines, one running Ubuntu 9.10 and the other Ubuntu 10.04. I used 9.10 as a testing server, so I could install a LAMP environment to prepare some code. Over the months I took a number of snapshots of this VM just in case something went wrong, and did a full copy of the entire VM a month ago. I created the 10.04 VM when Lucid Lynx launched so I could continue development on a fresh install. To get the files over, I simply added the 9.10 virtual disk into the 10.04 VM, grabbed some of the files I needed, and dismounted it. Unknown to me at the time, the changes to the 9.04 virtual disk meant that I could no longer boot it with the 9.10 VM. I'd always get the "The parent virtual disk has been modified since the child was created." error. I decided this was a good time to backup all the critical files, but now whenever I open the 9.04 disk to get the data it isn't in the same state as it was earlier. My question is; is it possible when I'm mounting the virtual disk that I'm not seeing the most recent snapshot, or in my blundering, have I lost the virtual disk. Cheers

  Read the article

• I love google Chrome, but some non-static pages like Piwik render it unresponsive

  - by gogowitsch

  The web-stat software Piwik stops reacting on mouse clicks after 1-2 seconds. The same is true for Google Maps and Producteev (but GMail and most other pages work like a charm). These rely heavily on JS, and work without Flash. I can click for a very short time period and then the mouse cursor doesn't feel the UI anymore (it doesn't turn into a I over input fields, though it moves; if the freeze occured while the pointer was over an input field, the cursor keeps being a I) and all clicks on the DOM are being ignored by Chrome. No message appears, neither obvious nor in the Console (F12). There is no obstructing div or the like in the DOM (F12). Since I couldn't find any hints on the source of my problems, I suspected my plugins and extensions. Unfortunately, neither deactivating all plugins nor all extensions solved the problem. for the problematic pages, it always happens no Dropbox running several GB of free RAM the taskmanager doesn't show any high CPU or memory utilization (the offending tab uses 30 MB and uses 0-1 % CPU) all problematic pages work in other browsers (Chrome, Firefox, IE) the rest of the computer is very responsive the computers use different security suites (Kaspersky and Avira) The effect exists between several (synchronized) Chrome instances on different machines, all running Windows 7. Both the OS and Chrome are updated automatically. Other tabs and the Chrome chrome (tabs, menus, toolbar buttons of the browser itself) still work. I really don't like switching between browsers. Any ideas?

  Read the article

• Cannot print certain colours on Ubuntu with HP Laser Printer

  - by ILMV

  We have a load of machines running Ubuntu in our office, they are either on 8.04 or 9.10. We have a server which connects a HP JetDirect that connects to a HP 3550 Colour Laser printer using CUPS. The problem we are having is we cannot print red, magenta or yellow at 100%, I've got a picture of the Ubuntu test page to demonstrate my problem: This is obviously a pretty big problem as we are constantly receiving documents with these colours and cannot successfully print them off, we cannot just switch the grayscale, our business depends on being able to print colour (seems trivial but we handle lots of artwork). We're using the recommended driver HP Color LaserJet 3550 footmatic/pxljr (recommended), there is another driver in the list labelled HP Color LaserJet 3550 footmatic/hpijs. These are production printers so need to make sure any setting change won't kick is in the nuts. It would appear HPIJS is for HP Inkjets, makes sense I guess. The problem doesn't occur in Windows. RESOLVED I've managed to solve the problem, I did indeed use the HPIJS driver (apparently for inkjets) but it seems to have worked, we're going to roll with it for now to see how we get on with it.

  Read the article

• Ubuntu 10.04 Server on Hyper-V Server R2 has sluggish install and command line

  - by Paul Hobart

  I've installed Ubuntu Server 10.04 (64 bit) on a Hyper-V Server R2. I've encountered two issues that I think are related: Very slow install Very slow command prompt The text-mode installer goes through a series of text-based prompt windows. It takes 7-10 seconds for each of these windows to draw on the screen. The end result is that every time I answer a prompt and hit enter I wait for 15 seconds while the screen redraws line by line. I can literally see each line of text being drawn (like the old 300 baud modems days). Once done installing, scrolling on the command line is super slow. For instance, if a simple command, like "ls", causes the screen to scroll, it will scroll very slowly. This happens on a fresh install. The server functions as a LAMP server and an OpenSSH server, but that's it (I don't even have any Virtual Hosts set up yet). AND this only happens on the Virtual Machine console. I access the console through Hyper-V Manager and don't have this problem on any of my other Virtual Machines. Also, this problem does NOT happen when accessing a shell through OpenSSH. How can I improve this performance issue?

  Read the article

• Server 2008 R2 DNS Lockup / Stops Resolving Internet Names

  - by Richard Maynard

  We've deployed our first 2008 R2 server on a client site which has replaced their existing 2003 DC. This server provides DNS resolution services to all client machines on that site for general internet usage. Since using the 2008 R2 DNS services we have noticed every couple of days the DNS server starts timing out when requests to certain sites are made (google is the only example I can provide at this time although it seems to be larger sites with problems rather than small - CDN compatiblity issue?). When you restart the DNS Server service then resolution returns to normal... just only for a day or so. Is anybody aware of any significant changes to the DNS server architecture or configuration out of the box in R2 that may explain this intermittent behaviour? I have already tried the fix listed here to no avail: http://weblogs.asp.net/owscott/archive/2009/09/15/windows-server-2008-r2-dns-issues.aspx The following PS command prompt info illustrates the issue: PS C:\Users\Administrator.UK> nslookup Default Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 > www.google.com Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 Non-authoritative answer: Name: www.l.google.com Addresses: 66.102.9.99 66.102.9.104 66.102.9.105 66.102.9.103 66.102.9.147 Aliases: www.google.com > www.google.co.uk Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 * s8209001.uk.kingdomfaith.com can't find www.google.co.uk: Server failed

  Read the article

• time sync with ntpd

  - by guthrie

  I run Debian on several systems, and their times do not seem to stay in sync. I can run ntpdate manually, but I thought that I should have an ntpd running that would automate that. I did check with apt and apt-cache but don't find any ntpd (or associated ntpq), not any such names in my system (locate...), but ntp-doc does still describe them. Looking around I see that there is an ntpdate-debian command, and it uses /etc/default/ntpdate for servers (instead of the standard /etc/ntp.conf), but even thought that file is there and has "yes" indicated to use ntp.conf, it fails with "no servers can be used", although ntpdate works fine. Is this just a layer over ntpdate, any reason to use it instead? So, why are they missing, do I need them, how do I automate time updates? Associated, two of my machines are virtualized on a MSoft VM, how is it that their clocks drift, and both to different values? (The underlying Windows machine clock seems stable). I see a few old notes about time & ntp problems on VMware, didn't find anything either current or relating to MSoft VMs. Anything I did see says just to use ntpd, but as above, ...?!

  Read the article

• Joining Samba to Active Directory with local user authentication

  - by Ansel Pol

  I apologise that this is somewhat incoherent, but hopefully someone will be able to make enough sense of this to understand what I'm trying to achieve and provide pointers. I have a machine with two network interfaces connected to two different networks (one of which it's providing several other services for, such as DNS), running two separate instances of Samba, one bound to each interface. One of the instances is just a workgroup-style setup using share-level authentication, which is all working fine. The problem is that I'm looking to join the other instance to an MS Active Directory domain (provided by MS Windows Small Business Server 2003) to enable a subset of the domain users to access the shares from Windows machines on the other network. The users who need access from the domain environment have accounts (whose names are all-lowercase versions of their domain usernames) on the machine running Samba, but I'm not sure about how to map the UIDs and everything I've read concerns authenticating accounts on that machine against either AD or another LDAP server. To clarify: I only want the credentials for AD users accessing the non-workgroup Samba instance to be authenticated against AD, not the accounts on the machine running Samba. I hope this is sufficiently clear. EDIT: In addition to being able to access the Samba shares from AD, I do also need to be able to access a share on the domain from the machine running Samba but would still like everything non-Samba-related to authenticate locally.

  Read the article

• AD server within another network - DNS issues

  - by Harry Muscle

  Here's a quick summary of the environment I support: we have a domain (domain A) that has about 20 client computers. The domain server for this domain and all the clients sit within the network infrastructure of a larger domain (domain B). All the computers get their network settings via DHCP from domain B's servers. I have no control and am unable to make changes to anything to do with domain B. The problem I have is that currently in order for my domain's (domain A) clients to be able to resolve the domain server and the shares on it they have their DNS server IP address set to domain A's domain server (via the default GPO). Unfortunately when a laptop (windows and mac) gets taken home, they are still looking for the domain server as their DNS server and obviously can't access the internet correctly outside of our environment. Ideally I need a solution where the machines use domain A's domain server as their DNS when inside the office and use what ever DNS server DHCP gives them when they are outside the office. However, since I have no control over the office DHCP server, I'm not sure how this can be accomplished. Any help and advice that anyone can offer is highly appreciated. Thanks, Harry P.S. The solution I'm trying to find needs to require no involvement from the user.

  Read the article

• GRE Tunnel over IPsec with Loopback

  - by Alek

  I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

  Read the article

• is it worth to use load balancer on web server/website

  - by user427969

  I have a website and a while ago, the web server of the company hosting my website was down for about a day. I consulted the company for a solution on how i can stop this from happening in future and they suggested to have a second machine and which will be connected to my current website/web server by a "load balancer" (at an additional huge cost!!!). The second machine will be replicate of the first one and so if i goes down, the other will always be running. ---- Explanation ----- My hosting company suggested that it will be a good idea to have a second machine running at the same time and both the machines will be connected by a load balancer which reduces the rist of a downtime. The second machine will be a mirror of the first and any changes to first must be replicated in the second. I don't mind spending money if it really saves my website from going down. I want to know is it worth having this "load balancer" for my purpose? My website is a 24/7 service. I cannot afford an outage of 24 hours/1 hour. I don't mind using this "load balancer" as far as it is really worth. I am not sure if its just a marketing trick of my hosting company or really a "best" solution Thanks for help. Regards

  Read the article

• Is 30 calls / second a lot for one IIS server?

  - by Lieven Cardoen

  We have a RIA application that 300 clients concurrently use in an intranet environment. Together they make 30 calls / second to IIS (asp.net) (actually it's 60 but calls are loadbalanced over two IIS servers). Half of the calls is getting an asset (Caching Profile is used so most of the time cache is hit), the other half is saving data to a sql server. Retrieving an asset is done with a aspx page. Saving the data happens via WebORB, asp.net and Sql Server. So some processing is needed by WebORB (amf decoding, GZIP, ...). We also use Spring.NET, and some of the container objects have a request scope (not a lot). IIS servers -- Virtual machines, 4 CPU, 2 gb RAM. They are based on Windows 2008 x64 SP2 Enterprise Edition. Sql Server 2008 is used. Apparently CPU of both IIS serers is constantly around 60-70%. Now, my question, is the load of 60-70% acceptable and how could we possible bring that down to less % (maybe using only one IIS server)? + Is 2 gb RAM enough? Assets can be up to 20mb, but on average, they are about 30kb. (the load of 60-70% is achieved with assets around 30kb). The data that gets saved with weborb is very small (2kb) and is just one object.

  Read the article

• How to direct reverse proxy requests using wildcard vhosts

  - by HonoredMule

  I'm interested in running a reverse proxy with 2-3 virtual machines behind it. Each internal server will run multiple virtual hosts, and rather than manually configuring each individual vhost on the proxy (a variety of vhosts come and go too often for this to be practical), I would like to use something which can employ pattern matching in a sequential order to find the appropriate back-end server. For example: Server 1: *.dev.mysite.com Server 2: *.stage.mysite.com Server 3: *.mysite.com, dev.mysite.com, stage.mysite.com, mysite.com Server 4: * In the above configuration, task.dev.mysite.com would go to Server 1, dev.mysite.com would go to Server 3, yoursite.stage.mysite.com to Server 2, www.mysite.com to Server 3, and yoursite.com to Server 4. I've looked into using Squid, Varnish, and nginx so far. I have my opinions regarding their respective desirability and general suitability, but it's not readily apparent if any of them can handle dynamic server selection in this manner and not require per-vhost configuration. Apache on the other hand can do this handily and simply, but otherwise (aside from being well-known and familiar) seems very poorly suited to the partly-performance-serving task. Performance isn't actually a major concern yet, but it seems foolish to use Apache if another system will perform far better and can also handle the desired 'hands-free' configuration. But so is frequently having to adjust the gateway for all production services and risk network-wide outage...and so also is setting oneself up for longer downtime later if Apache becomes a too-small bottleneck. Which of these (or other) reverse proxies can do it/would do it best? And maybe I should post this as a separate question, but if Apache is the only practical option, how safe/reliable/predictable is apache-mpm-event in apache2.2 (Ubuntu 12.04.1) particularly for a dedicated reverse proxy? As I understand it the Event MPM was declared "safe" as of 2.4 but it's unclear whether reaching stability in 2.4 has any implications for the older (2.2) versions available in official/stable package channels of various distros.

  Read the article

• Windows 7 PC cannot see some LAN PCs, but can access them via path

  - by zoot

  In an office LAN, with Windows 7 Professional workstations and a FreeNAS Samba server, 2 workstations have intermittent problems in browsing for the other workstations, as well as the FreeNAS server. However, so far, it appears that typing in the path to any of the workstations which aren't visible via the "browse" function, works. ie. the machine Workstation7 is not visible while browsing via Windows Explorer, but is accessible if I type \\Workstation7 in the path field. Occasionally the workstations exhibiting these symptoms show errors that their connection to the FreeNAS server has failed and only rebooting resolves the issue. All other workstations on the network use identical Windows 7 Professional installations and never have these problems. I've checked all machines and they're not using Home Groups. All are setup on the same WorkGroup as the FreeNAS server and the network type is set to Work Network. Temporarily disabling the firewall on the workstations with the issue made no difference, so I know this has nothing to do with the firewall settings. Any pointers would be appreciated. Thanks.

  Read the article

• SharePoint Backup/Restore without stsadm

  - by Kevin

  Due to problems we found with the restore of sites/site collections using stsadm (our tasks generated from workflows were not restored), we've taken a different route for backup/restore. We plan a major customization to our SP site and want to take a backup so we can rollback in case the install fails. In our System Testing (not production) environment, we've backed up the 12 hive, the virtual dir's that the IIS points to SharePoint, and the SharePoint databases in SQL (using SQL server to do the db backups). We have custom event handlers and workflows built with Visual Studio, and deploy the dlls to the GAC as version 2 (signed and versioned in Visual Studio). So when we deploy, the GAC will contain 2 versions of the workflows - version 1 and version 2. During the deploy we use SP stsadm features to install/activate the WF's. We also go to each library and add the new, version 2 WFs. This automatically sets the version 1 WF's to "Not Allow" new instances (which is what we want) and the version 2 as active - perfect so far. When we've completed the install, we then assume a failure and attempt to restore to the same machines (SharePoint on one server, SQL on another). We start by uninstalling the version 2 WF's from the GAC, reset IIS (to clear cache of these ver. 2 WF dlls'), restore the 12-hive and virtual directory folders, then restore the SQL dbs. This is all just as manual as you read it - no stsadm here. All seems to work after our restore, it appears the restore was successful - the mods we made to column names, data changes, etc during the install are all reverted back to the original pre-install state. With one exception. When we run a workflow, it always fails and the Logs in the 12-hive indicates the WF is still trying to use the version 2 of the dll (System.IO file not found error) We think we've backed up and restored all the moving pieces of Sharepoint but we're missing something here, does anybody have any ideas why the version 2 WF dlls are still being referenced eventhough we restored all the folders and db's of SharePoint? Thanks, Kevin

  Read the article

• Mac Management Without Permission and Security

  - by Bart Silverstrim

  I was going through some literature on managing OS X laptops and asked someone some questions about usage scenarios when using the MacBooks. I asked someone more knowledgeable than I about whether it was possible for my Mac to be taken over if I were visiting another site for a conference or if I went on a wifi network at a local coffee house with policies from an OS X Server with workgroup manager (either legit for the site or someone running a version of OS X Server on hardware they have hidden somewhere on the network), which apparently could be set up to do things like limit my access to Finder or impose other neat whiz-bang management features. He said that it is indeed possible for it to happen as it would be assigned via the DHCP server and the OS X server would assume my Mac is a guest and could hand out restrictions and apparently my Mac will happily accept them without notifying me or giving me an option, unlike Windows which I believe would need to be joined to a domain before it becomes "managed" by Active Directory. So my question is as network admins and sysadmins with users traveling with MacBooks, is there a way to reasonably protect your users from having their machines hijacked without resorting to just turning off networking all the time? Or isn't this much of a security hazard? What threat does this pose to the road warriors in your businesses?

  Read the article

• Windows 7 Users unable to add Windows 2003 server printers

  - by TravBrack

  Hi there I just rolled out a few Windows 7 x64 machines and ran into this issue where non-admin users are unable to add printers hosted on a windows 2003 server. It works fine on a 2008 server. The issue appears to be with the point and print system. A user will attempt to add the printer, a prompt will come up requiring the user to elevate privileges in order to install a driver, and will fail citing 'access denied'. I found the group policy setting Point and Print Restrictions: When the policy setting is disabled: -Windows Vista computers will not show a warning or an elevated command prompt when users create a printer connection to any server using Point and Print. So I disabled it, verified that the policy was being picked up using rsop, but it still does the same thing. I've also tried the following: Recreating the printers using newer drivers Adding the printer using 32 bit drivers on the 2003 machine, then adding the 64 bit drivers on a Windows 7 machine Adding the printer from a windows 7 machine using print management None of these things work. The security settings are no different than the working printers. Help?

  Read the article

• Accessing SSH_AUTH_SOCK from another non-root user

  - by Danny F

  The Scenario: I am running ssh-agent on my local PC, and all my servers/clients are setup to forward SSH agent auth. I can hop between all my machines using the ssh-agent on my local PC. That works. I need to be able to SSH to a machine as myself (user1), change to another user named user2 (sudo -i -u user2), and then ssh to another box using the ssh-agent I have running on my local PC. Lets say I want to do something like ssh user3@machine2 (assuming that user3 has my public SSH key in their authorized_keys file). I have sudo configured to keep the SSH_AUTH_SOCK environment variable. All users involved (user[1-3]), are non privileged users (not root). The Problem: When I change to another user, even though the SSH_AUTH_SOCK variable is set correctly, (lets say its set to: /tmp/ssh-HbKVFL7799/agent.13799) user2 does not have access to the socket that was created by user1 - Which of course makes sense, otherwise user2 could hijack user1's private key and hop around as that user. This scenario works just fine if instead of getting a shell via sudo for user2, I get a shell via sudo for root. Because naturally root has access to all the files on the machine. The question: Preferably using sudo, how can I change from user1 to user2, but still have access to user1's SSH_AUTH_SOCK?

  Read the article

• Windows AD DNS: Event ID 5504

  - by Chris_K

  Two of my AD controllers (both running DNS service) appear to be having a similar issue. Both are throwing lots of events in the DNS events that look like this: Event Type: Information Event Source: DNS Event Category: None Event ID: 5504 Date: 5/24/2010 Time: 11:51:38 AM User: N/A Computer: ALPHA Description: The DNS server encountered an invalid domain name in a packet from 76.74.137.6. The packet will be rejected. The event data contains the DNS packet. That will come with the same event, same time, with a packet from 76.74.137.7 as well. I know this is "Information" not an error, but since it is new and different it bothers me (yes, I fear unexplained change!) Both machines are running Windows 2003 R2 SP2. The DNS servers are not exposed to the internet. Both DNS servers are configured to use OpenDNS for Forwarders. For both servers, this started about a week ago. Any thoughts on: 1) should I be concerned? 2) how can I stop/fix this? To keep it interesting, I have a 3rd AD / DNS box. Same domain, different Active Directory site. Same forwarders, yet doesn't have this issue.

  Read the article

• Are Colocation Cross Connects Worth While

  - by SvrGuy

  We currently operate three clusters of collocated machines in different data centers. Recently, I became aware that our newest data center will offer to cross connect us to a bandwidth provider free of charge. In the past, I never really investigated a cross connect for bandwidth because I figured that the rates would be similar to what we are paying the colo now and that it would reduce our resiliency (because we would only be using one or two carriers for IP, where as the colo uses, say 8 different providers). Then I saw an ad for hurricane electric internet services (http://he.net/cgi-bin/ip_transit_quote) that gave a price for IP transit at $1/Mbs, which is much better than the $30/Mb we pay for the blended bandwidth. What are people out there typically paying for bandwith via cross connect and how hard is to setup? Is my understanding that what you do is open agreemetns with two or three ISPs, cross connect to them and then configure your top of rack router on their network. Can you really get IP transit down to a couple of dollars per megabit per month just by doing the routing yourself? Or, is my understanding of cross connection fundamentally wrong?

  Read the article

• Poor gaming performance with hyper-v installed in windows 8

  - by SnowCrash

  I am getting very poor gaming performance on my Windows 8 host OS with Hyper-V installed but no guest machines running. For example World of Tanks reports 60-70 FPS without Hyper-V installed and 4-14 FPS with it installed. A similar, dramatic, hit is observed in several other games so the issue is not WoT specific. To make the point clear, I am not trying to run games in a virtual machine. I don't even have a VM running while observing this effect. I simply have the Hyper-V feature installed. My system specs: AMD Phenom II 965 (3.4 GHz) AMD Radeon 6950 2GB (XFX Double D HD-695X-CDFC) 16GB DDR3 1333 AMD 790GX chipset Mainboard (Gigabyte GA-MA790GPT-UD3H) I have tried every AMD driver from 12.8 to the current 12.11beta8, virtualization is enabled in the BIOS settings, the onboard 3300HD video device is disabled in BIOS and I have read the MSDN blog entry here regarding a similar issue in Server 2008 that was resolved in 2008 R2 (and hopefully not regressed in Win 8). I'd like to be able to use Hyper-V for development and testing at home (I am a sysadmin/software developer professionally). If, however, I can't also use my home system for entertainment I'll have to scrap those plans.

  Read the article

• Two NIC's 2 Internet Connections, 1 Windows Server 2008 RC2, Routing help required

  - by PJZ

  Hello, I have a Windows 2008 server and 4 other client machines on my home network. I have two internet connections. The main connection is setup with a home router and DHCP on that for all the clients on the network. The secondary connection is just a cable modem which is plugged directly into the server. Local Area Connection: This NIC has an external IP and is connected to the Cable Modem. Local Area Connection 2: This NIC has an internal IP (192.168.0.102) and allows access to all the internal computers. It also has internet access via the local router. So here lies the problem, I want to use the Cable connection on the server for the internet traffic (so that the traffic for server/clients are seperated) but I also need to maintain local access. I am wondering how to make it so that all the internet traffic goes via that NIC because at the moment it goes through the local NIC. As a secondary problem I would also like to forward the connection of one application used by the clients via the server and the cable/server internet because of poor routing for it on the main connection. This perhaps is something for another question though. Thanks for any help you can offer me. Regards PJ

  Read the article

• Can't ping a DNS zone on windows server 2008 R2

  - by Roberto Fernandes

  I´ve just configured a windows server 2008 r2, but got a lot of problems on DNS role. Let me talk about the server configuration: name: fdserver IP address: 192.168.0.10 I have a DNS zone called "fd.local". This is my domain and it´s working ok. I´ve created a zone called fdserver, and inside this zone a record (A) with "*" as a host. because this is a webserver, i´ve configured apache so if you enter something like "site.fdserver" it will point you to the "site" folder. This is working ok ONLY inside the server. This server is a DNS server too... and have 3 entries: 192.168.0.10 (his own IP), 8.8.8.8 and 8.8.4.4 (google public DNS). Now start the problems... Most of the computers on my network, CAN join the domain without problems. But just CAN'T ping "something.fdserver". Now comes the strange thing... If I remove the twoo secondary entries on my DNS server (8.8.8.8 and 8.8.4.4), it obvious stop accessing websites (like microsoft.com), but now the computer CAN ping "something.fdserver". I don´t know If I explained correctly... and my English is terrible... but inside the server is all working as it supposed to work. But in the workstation machines, it work only if I remove the secondary DNS!! If you need any details, just ask! thanks!

  Read the article

• Mysql Cluster not working on Ubuntu

  - by user53864

  I am unable to setup MySQL Cluster on ubuntu servers. As a starting point I started from the link but I am not successful and the tar ball version I download is 6.3.45. As I wanted to test the mysql cluster, the Data node and SQL node are same but sql never appeared as connected in management node console and it looks like below. [ndbd(NDB)] 2 node(s) id=2 @192.168.1.107 (Version: version number, Nodegroup: 0, Master) id=3 @192.168.1.108 (Version: version number, Nodegroup: 0) [ndb_mgmd(MGM)] 1 node(s) id=1 @192.168.1.105 (Version: version number) [mysqld(API)] 2 node(s) id=4 (not connected, accepting connect from 192.168.1.107) id=5 (not connected, accepting connect from 192.168.1.108) On all the 3 machines mysql-server & client(apt-get install mysql-server mysql-client) were already installed and I completely stopped and also removed them at the system start up. Now the mysqld is from extracted cluster tar ball(/usr/local/mysql/support-files/mysql.server). As for testing, I created a test database on both the data nodes but the tables are also not syncing on other node. I checked many links, configurations are remained similar in all the links but somewhere it's going wrong. Anymore extra package is required?, Could anyone help me here..?. I am trying this for past 3 days... Thank you!

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >