Search Results

Search found 12844 results on 514 pages for 'dual graphics card'.

Page 178/514 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

• treeview loses data when page is being refreshed in asp.net

  - by Greg

  Hi, I have a treeview and I written a code for his "treeNodePopulate" event: protected void ycActiveTree_TreeNodePopulate(object sender, TreeNodeEventArgs e) { if (Application["idList"] != null && e.Node.Depth == 0) { string[] words = ((String)Application["idList"]).Split(' '); // Yellow Card details TreeNode child = new TreeNode(""); // Go over all the yellow card details and populate the treeview for (int i = 1; i < words.Length; i++) { child.SelectAction = TreeNodeSelectAction.None; // Same yellow card if (words[i] != "*") { // End of details and start of point ip's if (words[i] == "$") { // Add the yellow card node TreeNode yellowCardNode = new TreeNode(child.Text); yellowCardNode.SelectAction = TreeNodeSelectAction.Expand; e.Node.ChildNodes.Add(yellowCardNode); child.Text = ""; } // yellow card details else { child.Text = child.Text + words[i] + " "; } } // End of yellow card else { child.PopulateOnDemand = false; child.SelectAction = TreeNodeSelectAction.None; // Populate the yellow card node e.Node.ChildNodes[e.Node.ChildNodes.Count - 1].ChildNodes.Add(child); TreeNode moveChild = new TreeNode("Move To Reviewed"); moveChild.PopulateOnDemand = false; moveChild.SelectAction = TreeNodeSelectAction.Select; e.Node.ChildNodes[e.Node.ChildNodes.Count - 1].ChildNodes.Add(moveChild); child = new TreeNode(""); } } Application["idList"] = null; } } I want the treenode to get the data from the Application variable and then nullify the Application variable so that the tree will take data from Applcation only if there is something in it (I put data into the application from another page and then redirect to this page) But when I refresh this page the data in the treenode isnt being saved. I mean after the refresh the Application is null so he isnt doing anything. The question is why is the data that I put in the treenode earlier isnt being saved? The "enableViewState" property is set to "true".. Thanks in advance, Greg

  Read the article

• Finding out max available print area

  - by Armagan

  I'm trying to find out max available area on my printer. I've printed a simple rectangle trying out different boundary variables. My question is, why doesn't first two work correctly? They don't print a full rectangle on the paper, only the left and top sides are drawn. Why does only the third one prints a full rectangle? I was under the impression of that all three should be working correctly. What am I missing? Here's my code: this.printDocument1.DefaultPageSettings.Margins = new Margins(0, 0, 0, 0); ... private void PrintPage(object sender, PrintPageEventArgs e) { //Method 1, no right and bottom sides are printed e.Graphics.DrawRectangle(new Pen(Color.Black, 1), e.PageBounds); //Method 2, same as Method 1 e.Graphics.DrawRectangle(new Pen(Color.Black, 1), e.MarginBounds); //Method 3, works correctly e.Graphics.DrawRectangle(new Pen(Color.Black, 1), new Rectangle((int)e.Graphics.VisibleClipBounds.X, (int)e.Graphics.VisibleClipBounds.Y, (int)e.Graphics.VisibleClipBounds.Width, (int)e.Graphics.VisibleClipBounds.Height)); }

  Read the article

• GDI+ Rotated sub-image

  - by Andrew Robinson

  I have a rather large (30MB) image that I would like to take a small "slice" out of. The slice needs to represent a rotated portion of the original image. The following works but the corners are empty and it appears that I am taking a rectangular area of the original image, then rotating that and drawing it on an unrotated surface resulting in the missing corners. What I want is a rotated selection on the original image that is then drawn on an unrotated surface. I know I can first rotate the original image to accomplish this but this seems inefficient given its size. Any suggestions? Thanks, public Image SubImage(Image image, int x, int y, int width, int height, float angle) { var bitmap = new Bitmap(width, height); using (Graphics graphics = Graphics.FromImage(bitmap)) { graphics.TranslateTransform(bitmap.Width / 2.0f, bitmap.Height / 2.0f); graphics.RotateTransform(angle); graphics.TranslateTransform(-bitmap.Width / 2.0f, -bitmap.Height / 2.0f); graphics.DrawImage(image, new Rectangle(0, 0, width, height), x, y, width, height, GraphicsUnit.Pixel); } return bitmap; }

  Read the article

• How to print a page when a JButton is pressed in java swing using PrinterJob?

  - by Prayag Upd

  I tried the following code AWT but at runtime shows multiple print dialogs repeatedly.... package printerjob; import java.awt.BasicStroke; import java.awt.Frame; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.event.WindowAdapter; import java.awt.print.PageFormat; import java.awt.print.Printable; import java.awt.print.PrinterException; import java.awt.print.PrinterJob; /** * * @author pragX */ public class FramePrinterJob extends Frame implements Printable{ public void start(){ add(button); } @Override public void paint(Graphics graphics){ PrinterJob printerJob=PrinterJob.getPrinterJob(); printerJob.setPrintable(this); if(printerJob.printDialog()){ try{ printerJob.print(); }catch(PrinterException printerException){ //printerException.printStackTrace(); System.out.println("Error Printing." + printerException); } } } public int print(Graphics graphics, PageFormat pageFormat, int pageIndex) throws PrinterException { //throw new UnsupportedOperationException("Not supported yet."); if(pageIndex>=1){ return Printable.NO_SUCH_PAGE; } graphics.translate((int) pageFormat.getImageableX(), (int)pageFormat.getImageableY()); Graphics2D graphics2D=(Graphics2D)graphics; graphics2D.setStroke(new BasicStroke(4f)); graphics2D.drawLine(20, 20, 20, 120); graphics2D.drawLine(40, 20, 40, 120); graphics2D.drawLine(20, 70, 40, 70); graphics2D.drawLine(60, 70, 60, 120); graphics2D.drawLine(60, 40, 60, 45); return Printable.PAGE_EXISTS; } public static void main(String args[]){ Frame frame=new FramePrinterJob(); frame.addWindowListener(new WindowAdapter() { public void windowClosing(){System.exit(0);}}); frame.setSize(300,400); frame.setVisible(true); } }

  Read the article

• How to use a class's type as the type argument for an inherited collection property in C#

  - by Edelweiss Peimann

  I am trying to create a representation of various types of card that inherit from a generic card class and which all contain references to their owning decks. I tried re-declaring them, as suggested here, but it still won't convert to the specific card type. The code I currently have is as such: public class Deck<T> : List<T> where T : Card { void Shuffle() { throw new NotImplementedException("Shuffle not yet implemented."); } } public class Card { public Deck<Card> OwningDeck { get; set; } } public class FooCard : Card { public Deck<FooCard> OwningDeck { get { return (Deck<FooCard>)base.OwningDeck; } set { OwningDeck = value; } } } The compile-time error I am getting: Error 2 Cannot convert type 'Game.Cards.Deck' to 'Game.Cards.Deck' And a warning suggesting I use a new operator to specify that the hiding is intentional. Would doing so be a violation of convention? Is there a better way? My question to stackoverflow is this: Can what I am trying to do be done elegantly in the .NET type system? If so, can some examples be provided?

  Read the article

• Pass object from JSON into MVC Controller - its always null ?

  - by SteveCl

  Hi I have seen a few questions on here related to the a similar issue, I have read them, followed them, but still i have the same problem. I am basically creating an object in javascript and trying to call a method on the controller that will return a string of html. Not JSON. I've been playing around with dataType and contentType but still no joy. So apologies if the code snippets are a bit messy. Build the object in JS. function GetCardModel() { var card = {}; card.CardTitle = $("#CardTitle").val(); card.TopicTitle = $("#TopicTitle").val(); card.TopicBody = $("#TopicBody").data("tEditor").value(); card.CardClose = $("#CardClose").val(); card.CardFromName = $("#CardFromName").val(); return card; } Take a look at the object - all looks good and as it should in JSON. var model = GetCardModel(); alert(JSON.stringify(GetCardModel())); Make the call... $.ajax({ type: "POST", url: "/Postcard/Create/Preview/", dataType: "json", //contentType: "application/json", date: GetCardModel(), processData: true, success: function (data) { alert("im back"); alert(data); }, error: function (xhr, ajaxOptions, error) { alert(xhr.status); alert("Error: " + xhr.responseText); //alert(error); } }); Always when I step into the controller, the object is ALWAYS there, but with null values for all the properties.

  Read the article

• Flex Sprite xy Coordinates

  - by Ian

  Hi, I have a drawing that looks more or less like the attached image. image The orange square is the currently selected selected sprite. The sprites are all draws from coordinates that i receive from XML. var sprObject:Sprite = new Sprite(); sprObject.graphics.beginFill(itemList.c.toString()); sprObject.name = strName; sprObject.graphics.moveTo(iX, iY); sprObject.graphics.lineTo(iX2, iY2); sprObject.graphics.lineTo(iX3, iY3); sprObject.graphics.lineTo(iX4, iY4); sprObject.graphics.lineTo(iX, iX); sprObject.graphics.endFill(); mainUI.addChild(sprObject); // mainUI is a mx:UIComponent g_Sprite.push(sprObject); // array of sprites. What I want to do is the following. If I'm currently on the orange square and I use my keyboard direction buttons (up/down/left/right). I want to deselect the current sprite and select the next sprite in the appropriate direction. The problem I'm having is that I cannot get the x and y coordinates of the drawn sprites. If I look in the array, the x and y coordinates of the sprites are all 0. If I can retrieve that I can write an algorithm to determine the next sprite to select. Any help would be appreciated.

  Read the article

• Unusual "static" method declaration

  - by Jason

  public class Card { public enum Rank { DEUCE, THREE, FOUR, FIVE, SIX, SEVEN, EIGHT, NINE, TEN, JACK, QUEEN, KING, ACE } public enum Suit { CLUBS, DIAMONDS, HEARTS, SPADES } private final Rank rank; private final Suit suit; private Card(Rank rank, Suit suit) { this.rank = rank; this.suit = suit; } public Rank rank() { return rank; } public Suit suit() { return suit; } public String toString() { return rank + " of " + suit; } private static final List<Card> protoDeck = new ArrayList<Card>(); // Initialize prototype deck **static** { for (Suit suit : Suit.values()) for (Rank rank : Rank.values()) protoDeck.add(new Card(rank, suit)); } public static ArrayList<Card> newDeck() { return new ArrayList<Card>(protoDeck); // Return copy of prototype deck } } I have a quick question. The code block that starts right after the static keyword declaration, what type of method is that ? I haven't ever seen that before. If anyone could enlighten me, that would be greatly appreciated. Thanks.

  Read the article

• Passing array of pointers to another class

  - by user310153

  Hi, I am trying to do the following: in main.cpp: // Create an array of pointers to Block objects Block *blk[64]; for (i=0; i<8; i++) { for (j=0; j<8; j++) { int x_low = i*80; int y_low = j*45; blk[j*8+i] = new Block(30, x_low+40.0f, y_low+7.5f, &b); } } And then I am trying to pass it to the graphics object I have created: Graphics g(640, 480, &b, &p, blk[0], number_of_blocks); the graphics constructor looks like: Graphics::Graphics(int width, int height, Ball *b, Paddle *p, Block *blk, int number_of_blocks) { if I look at what is contained in the array from the graphics object, only the first item exists and then all the other items are in hyperspace: for (int i=0; i<64; i++) { printf("for block %d, %f, %f ", i, (_blk+(sizeof(_blk)*i))->_x_low, (_blk+(sizeof(_blk)*i))->_y_low); printf("blah %d\n", (_blk+(sizeof(_blk)*i))); } and if I look at the addresses, they are different (6956552 rather than 2280520 when I examine the addresses in the main class using: printf(" blah %d\n", &blk[j*8*i]); I am sure there must be something subtle I am doing wrong as its like I have copied the first item from the blk array to a new address when passed to the graphics object. Does this make sense? Any ideas? Cheers, Scott

  Read the article

• Building Tag Cloud Declarative ADF Component

  - by Arunkumar Ramamoorthy

  When building a website, there could a requirement to add a tag cloud to let the users know the popular tags (or terms) used in the site. In this blog, we would build a simple declarative component to be used as tag cloud in the page. To start with, we would first create the declarative component, which could display the tag cloud. We will do that by creating a new custom application from the new gallery. Give a name for the app and the project and from the new gallery, let us create a new ADF Declarative Component We need to specify the name for the declarative component, attributes in it etc. as follows For displaying the tags as cloud, we need to pass the content to this component. So, we will create an attribute to hold the values for the tag. Let us name it as "value" and make it as java.lang.String  type. Once after this, to hold the component, we need to create a tag library. This can be done by clicking on the Add Tag Library button. Clicking on OK buttons in all the open dialogs would create a declarative component for us. Now, we need to display the tag cloud based on the value passed to the component. To do that, we assume that the value is a Tree Binding and has two attributes in it, say "Name" and "Weight". To make a tag cloud, we would put together the "Name" in a loop and set it's font size based on the "Weight". After putting our logic to work, here is how the source look Attributes added to the declarative components can be retrieved by using #{attrs.<attribute_name>}. Now, we need to deploy this project as ADF Library Jar file, so that this can be distributed to the consuming applications. We'll select ADF Library Jar as type and create the profile. We would be getting the jar file after deployment. To test the functionality, we could create a simple Fusion Web Application. To add our custom component to the consuming application, we can create a file system connection pointing to the location where the jar file is and add it or, add through the project properties of the ViewController project. Now, our custom component has been added to the consuming application. We could test that by creating a VO in the model project with a query like, select 'Faces' as Name,25 as Weight from dual union all select 'ADF', 15 from dual  union all select 'ADFdi', 30 from dual union all select 'BC4J', 20 from dual union all select 'EJB', 40 from dual union all select 'WS', 35 from dual Add this VO to the AppModule, so that it would be exposed to the data control. Then, we could create a jspx page, and add a tree binding to the VO created. We can now see our Tag Cloud declarative component is available in the component palette.  It can be inserted from the component palette to our page and set it's value property to CollectionModel of the tree binding created. Now that we've created the Declarative component and added that to our page successfully, we can run the page to see how it looks. As per the query, the Tags are displayed in different fonts, based on their weight.

  Read the article

• Why did my flash drive become "read only" and (how) can I fix it?

  - by Bob

  I have a brand new flash drive (one week old) that has become marked as read only, by Windows, Kubuntu and a bootable partitioner. Why did this happen? Is it fixable? If it is, how can I fix this? The problem Firstly, this drive is new. It's certainly not been used enough to die from normal wear and tear, though I would not discount defective components. The drive itself has somehow become locked in a read only state. Windows' Disk management: Diskpart: Generic Flash Disk USB Device Disk ID: 33FA33FA Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : Yes Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No What really confuses me is Current Read-only State : Yes and Read-only : No. Attempted solutions So far, I've tried: Formatting it in Windows (in Disk management, the format options are greyed out when right clicking). DiskPart Clean (CLEAN - Clear the configuration information, or all information, off the disk.): DISKPART> clean DiskPart has encountered an error: The media is write protected. See the System Event Log for more information. There was nothing in the event log. Windows command line format >format G: Insert new disk for drive G: and press ENTER when ready... The type of the file system is FAT32. Verifying 7740M Cannot format. This volume is write protected. Windows chkdsk: see below for details Kubuntu fsck (through VirtualBox USB passthrough): see below for details Acronis True Image to format, to convert to GPT, to destroy and rebuild MBR, basically anything: failed (could not write to MBR) Details (and a nice story) Background This was a brand new, generic, 8GB flash drive I wanted to create a multiboot flash drive with. It came formatted as FAT32, though oddly a little larger than most 8 GIGAbyte flash drives I've come across. Approximately 127MB was listed as "used" by Windows. I never discovered why. The end usable space was about what I normally expect from a 8GB drive (approx 7.4 GIBIbytes). I had thrown quite a few Linux distros on, along with a copy of Hiren's. They would all boot perfectly. They were put on with YUMI. When I tried to put the Knoppix DVD on, YUMI added an odd video option to its boot comman which caused Knoppix to boot with a black screen on X. ttys 1 through 6 still worked as text only interfaces. A few days later, I took some time to take that odd video option off, making the boot command match the one that comes with Knoppix. On the attempt to boot, Knoppix reported some form of LZMA corruption. Leading up to the current issue I was thinking the Knoppix files may have been corrupted somehow, so I tried reloading it. The drive was nearly full (45MB free), so I deleted a generic ISO that also was not booting. That went fine. I then went through YUMI to 'uninstall' Knoppix, i.e. delete files and remove from the menus. The files went first, then the menus were cleared successfully. However, the free space was stuck at about 700MB, same as it was before removing Knoppix. In the old Knoppix folder, there was a 0 byte file named KNOPPIX that could not be deleted. I tried reinserting the drive to delete this file - without safely removing, if that made a difference (hey, first time for everything). Running the standard Windows chkdsk scan without /r or /f reported errors found. Running with /r just got it stuck. I decided to give fsck a shot, so I loaded up my Kubuntu VM and attached the drive to it with VirtualBox's USB 2.0 passthrough. I umounted it (/dev/sda1) and ran a fsck. There are differences between boot sector and its backup. I chose No action. It told me FATs differ and asked me to select either the first or second FAT. Whichever I selected, I got a notice of Free cluster summary wrong. If I chose Correct, it gave a list of incorrect file names. To try to fix something, at least, I ran it with the -p option. Halfway through fixing the files, the VM froze - I ended its process about ten minutes later. Cause? My next attempt was to use YUMI, again, to rebuild the whole drive. I used YUMI's built in reformat (to FAT32) option and installed a Kubuntu ISO (700MB). The format was successful, however, the extract and copy of Kubuntu (which YUMI uses a 7zip binary for) froze at about 60% done. After waiting for about fifteen minutes (longer than the 3.5GB Knoppix ISO took last time), I pulled the drive out. The drive at this point was already formatted, SYSLINUX already installed, just waiting on the unpacking of an ISO and the modifying of the boot menus. Plugging it back in, it came up as normal - however, any write action would fail. Disk management reported it as read only. On reconnect, it would come up as normal but a write operation would cause it to go read only again. After a few attempts, it started coming up as read only on insertion. Attempts to fix This is when I ran through the attempts listed above, to try and reformat it in case of a faulty format. However the inability to do so even on a bootable disk indicated something more serious is wrong. chkdsk now reports nothing is wrong, and fsck still reports MBR inconsistencies, but now always chooses first FAT automatically after telling me FATs differ. It still does the same Free cluster summary wrong afterwards. I cannot run with -p anymore because it is now marked as read only. It also managed to corrupt my VM's disk somehow on the first attempt (yes, I'm sure I chose sda, which is mapped to a 7.4GB drive - I triple checked). Thank god for snapshots? I'm just about out of ideas. To my inexperienced mind it looks like something in the drive's firmware set it to read only "permanently" somehow - is there any way to reset this? I don't particularly care about keeping data, considering I've reformatted it twice. Also, fixes that keep me in Windows are better; it reduces the risk of me accidentally nuking my main hard drive. Update 1: I pulled apart the drive out of curiosity. As you can see, there are no obvious write protect switches. There is an IC on the other side, ALCOR branded labelled AU6989HL, if that matters. If there appears to be no way to fix this, I'll probably pull out the (glued down) card and put it in a card reader to check if it's the card or the controller that died. Update 2: I've pulled the card off, Windows detects the drive as a card reader now. The contacts on the card don't appear to be used, and there are several rows of holes on the card itself. Putting it into the card reader only detects about 30MB total, RAW. It's probably either the reader incorrectly reporting the card as faulty (as if a real SD card's write protect was switched on) or a bad contact somewhere. If nothing else, I have a spare 8GB Micro SD card now... as soon as I figure out how to format it as 8GB.

  Read the article

• Lenovo Wi-Fi Replacement

  - by user22910

  I recently got my T500 with a very poor signal Wi-Fi, Thinkpad BGN, a Realtek chipset. I would like to replace my Wi-Fi card with either the Intel WiFi Link 5100 or 5300. However, I read somewhere that Lenovo specfically "whitelist" their Wi-Fi cards to only work with their laptops. I could not find any of the Intel Wi-Fi, moreover any Wi-Fi cards on the Lenovo site. So, I went to hunt around in Amazon and found several sellers. Plus what sort of card do I require? There is a difference between mini cards and the full sized card, though I do not know which one my laptop supports. Here are the specifications for my laptop: http://privatepaste.com/8b0537bce0 I would like to have confirmation which one of these specific cards as posted below will work on my laptop (or the one you recommend to have): Intel Wifi Link 5300 Intel WiFi Link 5100 - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft 2.0) Intel WiFi Link 5100 - Network adapter - PCI Express Half Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft) Intel WiFi Link 5300 - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft)

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated. Edit: These are the kernel errors we see: 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. 3w-9xxx 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 3w-9xxx 0000:09:00.0: setting latency timer to 64 3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing. 3w-9xxx: scsi0: ERROR: (0x06:0x001F): Microcontroller not ready during reset sequence. 3w-9xxx: scsi0: ERROR: (0x06:0x0036): Response queue (large) empty failed during reset sequence. 3w-9xxx 0000:09:00.0: PCI INT A disabled

  Read the article

• Windows 7 wireless not seeing any networks

  - by jkohlhepp

  I think I have managed to confuse Windows 7. When I did the install, I had the network cable plugged in to my router, but the wireless card was also enabled. During the install, Windows 7 seemed to see my wireless network and even asked me for the WEP key. I know that it used the WEP key because I initially entered an invalid one and it gave me an error. Then the network said "SoAndSoWireless Connected". However, when I unplug or disable my wired network card, then I have no internet, and it can't see any networks. When I plug in the wired network card, it says "SoAndSoWireless Connected". Under Network and Internet Network Connections I have "Local Area Connection" and "Wireless Network Connection". The wired one's status is "SoAndSoWireless" and the wireless status is "Not Connected". Also, the wireless connection can't seem to see any other wireless networks in the area and I know there are tons. My neighbors have several. I've somehow seemingly confused Windows 7 into thinking that my wired network card is my wireless card or something. Any ideas on how to un-confuse it? This is a desktop machine by the way, if it matters. EDIT: Ah, I think part of the problem is that I named my network accidentally the same as the name of the wireless network being broadcast by the wireless router. So that might be why it says that name on the hard-wired connection. Perhaps the drivers just are completely not working for the wireless card. Thanks, ~ Justin

  Read the article

• vyatta Server Reboots by itself

  - by Fernando

  I have an issue regarding some hardware, maybe you can help me. First, I set up a Supermicro Superserver SYS-5016I-NTF with a Intel Xeon X3470 and 4 GB of Ram with a Hotlava Card Tambora 64G4 with Intel Chipset 82599EB and 4x10G SPF+ ports. Installed Vyatta community edition 6.3. I used it as router making BGP connections with 2 operators. No load at all, temp ranges normal. But the issue is that it reboots by itself in a ramdom way. Not very often, once every few days. But it is unacceptable for production purposes. So I try to test on different hardware, and installed Vyatta community edition 6.3 on a Dell PowerEdge 2950, with Xeon(R) E5345 @ 2.33GHz and 4 GB of Ram. Same Vyatta configuration as Supermicro Server. With same hotlava Card model ( I bought two of them ) Well I have reboots with this equipment as well. Same frecuency as above. I have checked syslog no strange logs until boot process starts to be logged. So it seems server reboot suddenly. I have installed latest driver for the chipset of the Hotlava card. Servers are placed in a datacenter with UPS So finally two things in common in both servers: Hotlava Card. Someone with issues with this card, or the chipset?? Could be it this card?? Vyatta 6.3 community edition. I don't thing is the problem. Is a regular Debian with packages to glue together different services. Or maybe is something I am missing. Andy ideas, suggestions?? Thank you very much... Fernando

  Read the article

• Weird PCI bug: lots of missed packets, or data comes in "bursts"

  - by Thomas O

  I have an ABIT KN9 motherboard. It has one PCI-e x16 slot, three PCI-e x4 slots and two legacy PCI. My problem is with the legacy PCI (which I shall just call "PCI".) I currently have an Nvidia GeForce 8600 GT (a low end card) installed in the x16 slot and a TV card in PCI #1; the x4 slots are unused, as is PCI #2. I plan to upgrade the graphics card soon, the current card was spare. I sometimes install a USB expander in PCI #2 but it causes a lot of problems - see below. The problem is under Linux (Ubuntu 10.10, Linux 2.6.35-22-generic), but probably under all operating systems (I have not yet been able to test Windows, but I suspect it will do the same as the problems occur on the BIOS/POST side too, e.g. when using a USB keyboard on the expander the keyboard will not work at all) PCI has an enourmous delay, and packets arrive in large chunks. For example, when using the USB expander, my USB mouse lags and jumps in large steps every second or so, while using the motherboard USB does not present this problem. My TV card will only do one or two frames per second, and the program (xawtv) usually times out and crashes. In dmesg, I'm getting messages like: bttv0: timeout: drop=74, irq=154/100476, risc=31f6256c, bits: VSYNC HSYNC OFLOW RISCI for my TV card, and similar timeout issues for my USB expander with a mouse. I received the motherboard, processor and RAM second hand and have only just got around to building it, so I don't know if this problem has always existed, or if it's a result of my set up. If anyone has any hints or solutions it would be appreciated - this is kind of a show-stopper for me.

  Read the article

• Which upgrade path for disk IO bound postgres server?

  - by user41679

  Hi all, We currently have a Sun x4270 with 2xquad core Xeon Nehalmen 2.93ghz cores (16 threads), 72 gig of ram and 16 x 10k SAS disks split between the os raid 1, a partition for the Write Ahead Logs which is raid 10 and a partition for the database tables and indexes which is also raid 10, all xfs. I'm currently evaluating which path to go down in terms of upgrades. We'll be sharding the DB at some point soon, but for now I need to focus on hardware upgrades specifically. The machine is not CPU or memory bound at all at the moment, just IOWait is become an issue. The machine is mostly write access as we have a heavy caching layer. We're seeing about 300 write IOPS average on both the database partitions. We don't have any additional storage infrastructure like a Fiber Channel or ISCSI network. Budget isn't too much of a concern, something inline with the size of this server (i.e no $1m IBM machines) Space is ok on the DB side of things, we're running out obviously but there's also some reduction we can do. Additional space would be good though. My current thoughts are either: * ISCSI SAN, possible with 10Gbit network that has solid state acceleration. * FusionIO card / Sun F20 card (will the FusionIO card work in the Sun box? * DAS shelf (something like this http://www.broadberry.co.uk/das-direct-attached-storage-servers/cyberstore-224s-das) which a combination of 15k sas disks and some Intel X25-E drives for DB indexes etc) what would I need to put in the x4270 to add a DAS shelf? I think it's a SAS HBA card, do I have to use Sun's own card or will any PCI Express card work? Anything else??? what would you guys do from your experience? I appreciate it's a lot of questions, but I haven't expanded a DB machine for a number of years and the landscape has changed dramatically since then! Any advice or feedback would be very much appreciated. Let me know if there's anything else I can clarify. Thanks in advance!

  Read the article

• Wake-on-lan only works so many times

  - by Chance

  I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

  Read the article

• Wireless keeps shutting off in Windows 7

  - by Nathan Adams

  I have Windows 7 Ultimate 32bit installed on a Dell Latitude XT Tablet and for the life of me I can't figure out this really weird problem. The symptom is that the Wireless will disconnect from the AP and if I tell it to scan again, it says there are no APs in the area. I do have another wireless card in the laptop and if I disable the first one and enable the second, I am able to get onto the wireless however if I want to use the first card again I have to restart. I tried enabling/disabling the device, nothing will kick start the wireless again in the first card without a restart. I even tried different drivers. So, it seems it is random but it does occur more often when there is increased network activity (ie downloading a large file). The laptop doesn't seem to be overheating. I have tried the following: Under "Change Advanced Power Settings" for the current power profile, I set the "Wireless Adapter settings" to "Maximum Performance". Under device manger, I went to the card in question, and went to the advanced tab and set the "Power Saving mode" to "MAX_PSP" Both cards I have seem to exhibit the behavior after awhile. Both models of those cards are: Dell Wireless 1505 Draft 802.11n WLAN Mini-Card Gigabyte GN-WS30N 802.11n mini WLAN Card Has anyone have any ideas or ran into this before?

  Read the article

• Round date to 10 minutes interval

  - by Peter Lang

  I have a DATE column that I want to round to the next-lower 10 minute interval in a query (see example below). I managed to do it by truncating the seconds and then subtracting the last digit of minutes. WITH test_data AS ( SELECT TO_DATE('2010-01-01 10:00:00', 'YYYY-MM-DD HH24:MI:SS') d FROM dual UNION SELECT TO_DATE('2010-01-01 10:05:00', 'YYYY-MM-DD HH24:MI:SS') d FROM dual UNION SELECT TO_DATE('2010-01-01 10:09:59', 'YYYY-MM-DD HH24:MI:SS') d FROM dual UNION SELECT TO_DATE('2010-01-01 10:10:00', 'YYYY-MM-DD HH24:MI:SS') d FROM dual UNION SELECT TO_DATE('2099-01-01 10:00:33', 'YYYY-MM-DD HH24:MI:SS') d FROM dual ) -- #end of test-data SELECT d, TRUNC(d, 'MI') - MOD(TO_CHAR(d, 'MI'), 10) / (24 * 60) FROM test_data And here is the result: 01.01.2010 10:00:00    01.01.2010 10:00:00 01.01.2010 10:05:00    01.01.2010 10:00:00 01.01.2010 10:09:59    01.01.2010 10:00:00 01.01.2010 10:10:00    01.01.2010 10:10:00 01.01.2099 10:00:33    01.01.2099 10:00:00 Works as expected, but is there a better way? EDIT: I was curious about performance, so I did the following test with 500.000 rows and (not really) random dates. I am going to add the results as comments to the provided solutions. DECLARE t TIMESTAMP := SYSTIMESTAMP; BEGIN FOR i IN ( WITH test_data AS ( SELECT SYSDATE + ROWNUM / 5000 d FROM dual CONNECT BY ROWNUM <= 500000 ) SELECT TRUNC(d, 'MI') - MOD(TO_CHAR(d, 'MI'), 10) / (24 * 60) FROM test_data ) LOOP NULL; END LOOP; dbms_output.put_line( SYSTIMESTAMP - t ); END; This approach took 03.24 s.

  Read the article

• workaround for ORA-03113: end-of-file on communication channel

  - by Jefferstone

  The call to TEST_FUNCTION below fails with "ORA-03113: end-of-file on communication channel". A workaround is presented in TEST_FUNCTION2. I boiled down the code as my actual function is far more complex. Tested on Oracle 11G. Anyone have any idea why the first function fails? CREATE OR REPLACE TYPE "EMPLOYEE" AS OBJECT ( employee_id NUMBER(38), hire_date DATE ); CREATE OR REPLACE TYPE "EMPLOYEE_TABLE" AS TABLE OF EMPLOYEE; CREATE OR REPLACE FUNCTION TEST_FUNCTION RETURN EMPLOYEE_TABLE IS table1 EMPLOYEE_TABLE; table2 EMPLOYEE_TABLE; return_table EMPLOYEE_TABLE; BEGIN SELECT CAST(MULTISET ( SELECT user_id, created FROM all_users WHERE LOWER(username) < 'm' ) AS EMPLOYEE_TABLE) INTO table1 FROM dual; SELECT CAST(MULTISET ( SELECT user_id, created FROM all_users WHERE LOWER(username) >= 'm' ) AS EMPLOYEE_TABLE) INTO table2 FROM dual; SELECT CAST(MULTISET ( SELECT employee_id, hire_date FROM TABLE(table1) UNION SELECT employee_id, hire_date FROM TABLE(table2) ) AS EMPLOYEE_TABLE) INTO return_table FROM dual; RETURN return_table; END TEST_FUNCTION; CREATE OR REPLACE FUNCTION TEST_FUNCTION2 RETURN EMPLOYEE_TABLE IS table1 EMPLOYEE_TABLE; table2 EMPLOYEE_TABLE; return_table EMPLOYEE_TABLE; BEGIN SELECT CAST(MULTISET ( SELECT user_id, created FROM all_users WHERE LOWER(username) < 'm' ) AS EMPLOYEE_TABLE) INTO table1 FROM dual; SELECT CAST(MULTISET ( SELECT user_id, created FROM all_users WHERE LOWER(username) >= 'm' ) AS EMPLOYEE_TABLE) INTO table2 FROM dual; WITH combined AS ( SELECT employee_id, hire_date FROM TABLE(table1) UNION SELECT employee_id, hire_date FROM TABLE(table2) ) SELECT CAST(MULTISET ( SELECT * FROM combined ) AS EMPLOYEE_TABLE) INTO return_table FROM dual; RETURN return_table; END TEST_FUNCTION2; SELECT * FROM TABLE (TEST_FUNCTION()); -- Throws exception ORA-03113. SELECT * FROM TABLE (TEST_FUNCTION2()); -- Works

  Read the article

• Flash AS3 blur or liquify part of an image with mouse

  - by hamlet

  Hi, I am very beginner in flash. I want to load an image, show a cursor over the image and on mousedown I want to blur that actual part of the image. (e.g you can blur your face on the image and then save the new image). I can delete parts of the image with white line, but I would like to blur it instead // LIVE JPEG ENCODER 0.3 // from bytearray.org import asfiles.encoding.JPEGEncoder; import flash.external.ExternalInterface; ExternalInterface.addCallback("flash_saveImage", inflash_saveImage); var loader:Loader = new Loader(); loader.contentLoaderInfo.addEventListener(Event.COMPLETE, handleComplete); loader.load(new URLRequest(loaderInfo.parameters._filename)); //loader.load(new URLRequest("b.jpg")); var container_mc:MovieClip = new MovieClip;//create movieclip function handleComplete(e:Event):void { addChild(container_mc); var bitmapData:BitmapData = Bitmap(e.target.content).bitmapData; var matrix:Matrix = new Matrix(); container_mc.graphics.clear(); container_mc.graphics.beginBitmapFill(bitmapData, matrix, false); //container_mc.graphics.beginFill(0xFFFFFF,0); container_mc.graphics.drawRect(0, 0, bitmapData.width, bitmapData.height); container_mc.graphics.endFill(); swapChildren(container_mc, pencil); container_mc.addEventListener(MouseEvent.MOUSE_DOWN, startDrawing); container_mc.addEventListener(MouseEvent.MOUSE_UP, stopDrawing); container_mc.addEventListener(MouseEvent.MOUSE_MOVE, makeLine); } stage.addEventListener(MouseEvent.MOUSE_MOVE, moveCursor); Mouse.hide(); function moveCursor(event:MouseEvent):void { pencil.x = event.stageX; pencil.y = event.stageY; } function startDrawing(event:MouseEvent):void{ container_mc.graphics.lineStyle(20, 0xFFFFFF, 1); container_mc.graphics.moveTo(mouseX, mouseY); container_mc.addEventListener(MouseEvent.MOUSE_MOVE, makeLine); } function stopDrawing(event:MouseEvent):void{ container_mc.removeEventListener(MouseEvent.MOUSE_MOVE, makeLine); } function makeLine(event:MouseEvent):void{ container_mc.graphics.lineTo(mouseX, mouseY); } function inflash_saveImage ( ):void { var myURLLoader:URLLoader = new URLLoader(); var myBitmapSource:BitmapData = new BitmapData ( container_mc.width, container_mc.height ); // render the player as a bitmapdata myBitmapSource.draw ( container_mc ); // create the encoder with the appropriate quality var myEncoder:JPEGEncoder = new JPEGEncoder( 80 ); // generate a JPG binary stream to have a preview var myCapStream:ByteArray = myEncoder.encode ( myBitmapSource ); var header:URLRequestHeader = new URLRequestHeader ("Content-type", "application/octet-stream"); var myRequest:URLRequest = new URLRequest ( "save.php" ); myRequest.requestHeaders.push (header); myRequest.method = URLRequestMethod.POST; myRequest.data = myCapStream; myURLLoader.load ( myRequest ); } Thanks, hamlet

  Read the article

• Help finding longest non-repeating path through connected nodes - Python

  - by Jordan Magnuson

  I've been working on this for a couple of days now without success. Basically, I have a bunch of nodes arranged in a 2D matrix. Every node has four neighbors, except for the nodes on the sides and corners of the matrix, which have 3 and 2 neighbors, respectively. Imagine a bunch of square cards laid out side by side in a rectangular area--the project is actually simulating a sort of card/board game. Each node may or may not be connected to the nodes around it. Each node has a function (get_connections()), that returns the nodes immediately around it that it is connected to (so anywhere from 0 to 4 nodes are returned). Each node also has an "index" property, that contains it's position on the board matrix (eg '1, 4' - row 1, col 4). What I am trying to do is find the longest non-repeating path of connected nodes given a particular "start" node. I've uploaded a couple of images that should give a good idea of what I'm trying to do: In both images, the highlighted red cards are supposedly the longest path of connected cards containing the most upper-left card. However, you can see in both images that a couple of cards that should be in the path have been left out (Romania and Maldova in the first image, Greece and Turkey in the second) Here's the recursive function that I am using currently to find the longest path, given a starting node/card: def get_longest_trip(self, board, processed_connections = list(), processed_countries = list()): #Append this country to the processed countries list, #so we don't re-double over it processed_countries.append(self) possible_trips = dict() if self.get_connections(board): for i, card in enumerate(self.get_connections(board)): if card not in processed_countries: processed_connections.append((self, card)) possible_trips[i] = card.get_longest_trip(board, processed_connections, processed_countries) if possible_trips: longest_trip = [] for i, trip in possible_trips.iteritems(): trip_length = len(trip) if trip_length > len(longest_trip): longest_trip = trip longest_trip.append(self) return longest_trip else: print card_list = [] card_list.append(self) return card_list else: #If no connections from start_card, just return the start card #as the longest trip card_list = [] card_list.append(board.start_card) return card_list The problem here has to do with the processed_countries list: if you look at my first screenshot, you can see that what has happened is that when Ukraine came around, it looked at its two possible choices for longest path (Maldova-Romania, or Turkey, Bulgaria), saw that they were both equal, and chose one indiscriminantly. Now when Hungary comes around, it can't attempt to make a path through Romania (where the longest path would actually be), because Romania has been added to the processed_countries list by Ukraine. Any help on this is EXTREMELY appreciated. If you can find me a solution to this, recursive or not, I'd be happy to donate some $$ to you. I've uploaded my full source code (Python 2.6, Pygame 1.9 required) to: http://www.necessarygames.com/junk/planes_trains.zip The relevant code is in src/main.py, which is all set to run.

  Read the article

• C++ enum in foreach

  - by Spencer

  I've have a card class for a blackjack game with the following enums: enum Rank { Ace, Two, Three, Four, Five, Six, Seven, Eight, Nine, Ten, Jack, Queen, King }; enum Suit { Clubs, Diamonds, Hearts, Spades }; When I create the deck I want to write the code like this: // foreach Suit in Card::Suit // foreach Rank in Card::Rank // add new card(rank, suit) to deck I believe there is no foreach in c++. However, how do I traverse an enum? Thanks, Spencer

  Read the article

• adding a sprite to 1 <s:State>

  - by lostincode

  I'm looking for a flex 4 compatible way of adding a sprite generated with graphics library to a skin. If I generate the sprite like this: private function drawShape():void { theshape = new Sprite(); theshape.graphics.beginFill(0x666666); theshape.graphics.drawCircle(3,5,10); theshape.graphics.endFill(); } What would be the best way to add it such that I can control its presence by state

  Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >