Search Results

Search found 15264 results on 611 pages for 'recovery model'.

Page 178/611 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

• How to achieve the following RTO & RPO with logshipping only using SQL Server?

  - by Jimmy Chandra

  Trying to come up with viable backup restore & logshipping solution for achieving the following: 15 minutes Recovery Point Objective (no more than 15 minutes data loss at any time) 5 minutes Recovery Time Objective (must be able to get the db up and running back by 5 minutes) Considering using logshipping only (which I think is kind of pushing it, but I want to know if anyone else know how to achieve this). Some other info for consideration: Using 40 Gbit / sec fiber channel between the primary and disaster recovery (DRC) sites The sites are about 600 km apart. At close of business, the amount of data generated is predicted to be about 150 MB/sec. Log backup is planned for every 5 min. Doing some rough calculation I came up w/ the following numbers: 40 Gbit / sec = 5 MB / sec @ 100% network efficiency. 5 MB / sec = 300 MB / min. @ 300 MB / min, the total amount of data that can be transfer considering the 5min RTO is about 1.5GB, but that will left no time for the actual backup and restore, so if we cut it down to 3min logshipping time, which equals to ~900 MB over 3 minutes at 100% network efficiency, that will left about 1 min backup time and 1 minute restore time. Currently don't have any information if the system being used is capable of restoring 900 MB in 1 min, but assume it can. for COB scenario... 150 MB/sec, and considering the 3 min logshipping time, which should equal to about 27 GB of data over 3 mins...??? I think this is where the SLA will break... since there is no way to transfer 27 GB of data over a 40Gbit/sec line in 3 min. Can I get someone else opinion? I am thinking database mirroring might be a better answer for this...

  Read the article

• Windows 7 Not Starting and System Repair Not Loading

  - by Mark

  I have a Dell Inspiron 1545 running Windows 7 When turning on my PC I keep receiving a black screen with the option to use System Repair or Start Normally. Both options lead me to the System Repair background except no matter how long I wait the system restore options never show up. Choosing F8 and running all of the options including safe mode encounters the same result above. I tried to to use 2 system recovery disks 32x and 64x I downloaded and both lead to similiar results. When I choose System Repair running from the disk the System Repair Question asking to select a language pops ups but after this no matter how long I wait no other options appear. Next after restarting and selecting F8 (after hitting f12 and running from CD) I choose 'Run From Safe Mode with Command Prompt' I am able to run all of the options from System Restore with differing results: Startup Repair: Choosing this ends up in system repair indefinitely (left running 12 hrs) System Restore: Does Nothing. PC thinks for a second and then stops. When selecting ShutDown I see an error message stating there are no restore points. System Image Recovery: Service Cannot be started in Safe Mode Windows Memory Diagnostic: Runs test but then leads to system repair background which never loads system repair Command Prompt: chkdsk /r -Cannot Lock Current Drive...write protected. chkdsk /f -Cannot Lock Current Drive...write protected. bootcfg - Cannot open Boot.Ini file bootcfg - Ran all 3 (rebuildBcd, FixMbr and Fixboot) but PC still goes to System Repair background with no repair options popping up upon restart (without recovery CD). I'm on the verge of purchasing a boot utility disk for $50 unless there is anything else short of "take it to a computer shop" that somebody can suggest I try.

  Read the article

• What does "cpuid level" means ? Asking just for curiosity

  - by ogzylz

  For example, I put just 2 core info of a 16 core machine. What does "cpuid level : 6" line means? If u can provide info about lines "bogomips : 5992.10" and "clflush size : 64" I will be appreciated ------------- processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5992.10 clflush size : 64 cache_alignment : 128 address sizes : 40 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 1 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5985.23 clflush size : 64 cache_alignment : 128 address sizes : 40 bits physical, 48 bits virtual power management:

  Read the article

• Simultanious process mysteriously ending

  - by Matt

  I'm trying to run a large air quality model, written in FORTRAN, setup with bash scripts, and run in a work queue (slurm.) The first part of the modeling is to run an "entry" model, this runs with MPI in the work queue but only on one process. At one point in the logs, there's a mysterious FORTRAN STOP, and then later the model fails because something wasn't set up properly. This FORTRAN STOP isn't from the main process, which continues running. This is a huge model, but as far as I know there should not be any other processes running at the same time. It consistently fails at the exact same spot. (I can move it by adding debug, but the debug is in the main process) How can I determine what this process is? I've tried added a call to strace -feprocess $SHELL in the run script, but I'm new to this, so if it has offered any info, I haven't been able to use it yet. The is no trace output around the FORTRAN STOP. The whole process occurs so fast that I can't seem to observe it by using ps. Is there a way I can somehow monitor all the processes being initiated from the time the work queue starts? Or some other way I can figure out what is failing? This is running on CentOS 6.4, with Slurm, compiled with PGI 13.

  Read the article

• Cannot find wireless driver for HP laptop

  - by rodey

  I have an HP laptop (model: dv7-1267cl, Windows 7 64-bit Home Premium) and I cannot find the wireless driver for the laptop. I am need of a different version because my wireless connection under Windows is flaky and unreliable. I have problems printing to my wireless printer and logging in to and using several sites like reddit.com, phoenix.edu and facebook.com - I get several "page cannot be displayed" messages while using my wireless connection. I disable my wireless adapter and use an ethernet cable and it all works fine. I also used an Ubuntu Live CD to confirm that there is not a problem with the hardware. This is software/driver issue. The drivers were auto installed by the OS. The Device Manager shows the wireless adapter as Atheros AR5009 802.11 a/g/n WiFi Adapter. I have checked the HP website for my laptop and they do not have wireless drivers listed for that model wireless adapter. I have also checked with atheros.com and I do not see my model adapter on their list of available hardware. Device Manager lists the Hardware ID's for my adapter as: PCI\VEN_168C&DEV_002A&SUBSYS_1381103C&REV_01 PCI\VEN_168C&DEV_002A&SUBSYS_1381103C PCI\VEN_168C&DEV_002A&CC_028000 PCI\VEN_168C&DEV_002A&CC_0280 A search for the first Hardware ID turned up this question from experts-exchange.com. tl;dr A driver does not exist for that model adapter.

  Read the article

• Mysql - innoDb - is in the future! Current system log sequence number

  - by Ward Loockx

  I have this error in my syslog. I restored an older dump to solve this problem, after some reading. Now The errors in syslog are far less than before. But still a few times an hour I get Sep 1 14:23:29 homer mysqld: 120901 14:23:29 InnoDB: Error: page 96637 log sequence number 7 1223357717 Sep 1 14:23:29 homer mysqld: InnoDB: is in the future! Current system log sequence number 6 647303887. Sep 1 14:23:29 homer mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 14:23:29 homer mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 14:23:29 homer mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html Sep 1 14:23:29 homer mysqld: InnoDB: for more information. Sep 1 14:23:29 homer mysqld: 120901 14:23:29 InnoDB: Error: page 96638 log sequence number 8 150027924 Sep 1 14:23:29 homer mysqld: InnoDB: is in the future! Current system log sequence number 6 647303887. Sep 1 14:23:29 homer mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 14:23:29 homer mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 14:23:29 homer mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html Sep 1 14:23:29 homer mysqld: InnoDB: for more information. Sep 1 14:23:29 homer mysqld: 120901 14:23:29 InnoDB: Error: page 96639 log sequence number 7 4208567151 Sep 1 14:23:29 homer mysqld: InnoDB: is in the future! Current system log sequence number 6 647303887. Sep 1 14:23:29 homer mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 14:23:29 homer mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 14:23:29 homer mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html Sep 1 14:23:29 homer mysqld: InnoDB: for more information. Anybody that knows how I can track what database is causing this issue? And how to fix?

  Read the article

• Cannot find wireless driver for HP laptop

  - by rodey

  I have an HP laptop (model: dv7-1267cl, Windows 7 64-bit Home Premium) and I cannot find the wireless driver for the laptop. I am need of a different version because my wireless connection under Windows is flaky and unreliable. I have problems printing to my wireless printer and logging in to and using several sites like reddit.com, phoenix.edu and facebook.com - I get several "page cannot be displayed" messages while using my wireless connection. I disable my wireless adapter and use an ethernet cable and it all works fine. I also used an Ubuntu Live CD to confirm that there is not a problem with the hardware. This is software/driver issue. The drivers were auto installed by the OS. The Device Manager shows the wireless adapter as Atheros AR5009 802.11 a/g/n WiFi Adapter. I have checked the HP website for my laptop and they do not have wireless drivers listed for that model wireless adapter. I have also checked with atheros.com and I do not see my model adapter on their list of available hardware. Device Manager lists the Hardware ID's for my adapter as: PCI\VEN_168C&DEV_002A&SUBSYS_1381103C&REV_01 PCI\VEN_168C&DEV_002A&SUBSYS_1381103C PCI\VEN_168C&DEV_002A&CC_028000 PCI\VEN_168C&DEV_002A&CC_0280 A search for the first Hardware ID turned up this question from experts-exchange.com. tl;dr A driver does not exist for that model adapter.

  Read the article

• What's the best way to completely remove everything from a computer, without re-installing?

  - by Connor W

  I have a friend who wants to sell their computer, but obviously all personal information and software that it is on it needs to be removed before doing so. Usually I would format and reinstall it, but I cannot easily get hold of the required XP DVDs and I'm not 100% sure the serial number is stuck on the case as usual so getting hold of it will probably require more effort than I'm prepared to spend. So, what's the best and quickest way to remove and uninstall everything from the PC without reinstalling it? Thanks. EDITS: I'm looking to remove things like Internet History and all installed programs, too. I know how to remove the history and each individual program, but that could take hours. The machine is not branded and therefore there is no website I can go to download recovery software. There is no recovery partition on the computer and I'm not aware of any recovery DVDs for it either. I can only assume it was installed from a retail copy, and therefore there is no way to recover it to factory settings. It needs to have XP installed, not any distribution of Linux. Like most average people, the person getting the computer will not understand what to do with a computer that doesn't have Windows installed, and software like Office does not work on Linux either. Buying another licence is not really an option either. She has just brought a laptop to replace the computer, so buying another licence for a computer that she's getting rid of doesn't really make sense. Thanks for all the help so far!

  Read the article

• mysqld crashes on any statement

  - by ??iu

  I restarted my slave to change configuration settings to skip reverse hostname lookup on connecting and to enable the slow query log. I edited /etc/my.cnf making only these changes, then restarted mysqld with /etc/init.d/mysql restart All appeared to be well but when I connect to msyqld remotely or locally though it connects okay a slight problem is that mysqld crashes whenever you try to issue any kind of statement. The client looks like: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.1.31-1ubuntu2-log Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> show tables; ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: mydb ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away Bus error The mysqld error log looks like: 101210 16:35:51 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:35:51 InnoDB: Assertion failure in thread 140245598570832 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:35:51 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=3 max_threads=600 threads_connected=3 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18209220 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f8d791580d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f902a76a080] /lib/libc.so.6(gsignal+0x35) [0x7f90291f8fb5] /lib/libc.so.6(abort+0x183) [0x7f90291fabc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f902a7623ba] /lib/libc.so.6(clone+0x6d) [0x7f90292abfcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18213c70 = thd->thread_id=3 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:35:51 mysqld_safe Number of processes running now: 0 101210 16:35:51 mysqld_safe mysqld restarted InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 101210 16:35:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 101210 16:35:56 InnoDB: Started; log sequence number 456 143528628 101210 16:35:56 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 16:35:56 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 16:35:56 [Note] Event Scheduler: Loaded 0 events 101210 16:35:56 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 16:36:11 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:36:11 InnoDB: Assertion failure in thread 139955151501648 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:36:11 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18588720 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f49d916f0d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f4c8a73f080] /lib/libc.so.6(gsignal+0x35) [0x7f4c891cdfb5] /lib/libc.so.6(abort+0x183) [0x7f4c891cfbc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f4c8a7373ba] /lib/libc.so.6(clone+0x6d) [0x7f4c89280fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18599950 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:36:11 mysqld_safe Number of processes running now: 0 101210 16:36:11 mysqld_safe mysqld restarted The config is [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_file_per_table innodb_buffer_pool_size=10G innodb_log_buffer_size=4M innodb_flush_log_at_trx_commit=2 innodb_thread_concurrency=8 skip-slave-start server-id=3 # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /DB2/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 128K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 600 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M # skip-federated slow-query-log skip-name-resolve Update: I followed the instructions as per http://dev.mysql.com/doc/refman/5.1/en/forcing-innodb-recovery.html and set innodb_force_recovery = 4 and the logs are showing a different error but the behavior is still the same: 101210 19:14:15 mysqld_safe mysqld restarted 101210 19:14:19 InnoDB: Started; log sequence number 456 143528628 InnoDB: !!! innodb_force_recovery is set to 4 !!! 101210 19:14:19 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 19:14:19 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 19:14:19 [Note] Event Scheduler: Loaded 0 events 101210 19:14:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 19:14:32 InnoDB: error: space object of table mydb/__twitter_friend, InnoDB: space id 1602 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/access_request, InnoDB: space id 1318 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/activity, InnoDB: space id 1595 did not exist in memory. Retrying an open. 101210 19:14:32 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x1753c070 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f7a0b5800d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f7cbc350080] /usr/sbin/mysqld(ha_innobase::innobase_get_index(unsigned int)+0x46) [0x77c516] /usr/sbin/mysqld(ha_innobase::innobase_initialize_autoinc()+0x40) [0x77c640] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x3f3) [0x781f23] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f7cbc3483ba] /lib/libc.so.6(clone+0x6d) [0x7f7cbae91fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x1754d690 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash.

  Read the article

• Windows 7 boots to black screen with blinking cursor

  - by murgatroid99

  I have an Alienware M17x that dual boots into Ubuntu 11.04 and Windows 7 Home Premium. Currently, the computer starts at the GRUB loader and will boot into Ubuntu, but if I try to boot into Windows, I immediately get a black screen with a blinking cursor in the upper left corner. The output of fdisk -l is Device Boot Start End Blocks Id System /dev/dm-0p1 1 5 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/dm-0p2 6 1918 15360000 7 HPFS/NTFS Partition 2 does not start on physical sector boundary. /dev/dm-0p3 * 1918 64772 504878877+ 7 HPFS/NTFS Partition 3 does not start on physical sector boundary. /dev/dm-0p4 64772 77827 104858625 5 Extended Partition 4 does not start on physical sector boundary. /dev/dm-0p5 64772 67204 19531008 83 Linux /dev/dm-0p6 67204 74498 58593536 83 Linux /dev/dm-0p7 74498 77577 24731648 83 Linux /dev/dm-0p8 77578 77827 2000128 82 Linux swap / Solaris I have used the Windows rescue CD, and run the automatic error fixer until it finds no errors. I have run chkdsk /R on both the main Windows 7 (/dev/dm-0p3) partition and the recovery partition (/dev/dm-0p2). I set the main Windows 7 partition to be active. I also tried running in the recovery console the commands bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd None of these helped and the last set of commands deletes grub, which I then have to reinstall from Ubuntu. I think the last thing I did in windows before this started was install the newest ATI driver for my video card. This would suggest using system restore, and I actually had a restore point earlier (after the problem started), but after whatever I did that restore point does not appear in the list on the recovery disk any more, so I cannot do a system restore. Is there anything else I can try to make Windows boot properly again? Edit: Running the suggested commands bootsect /nt60 c: bcdboot c:\windows /s c: was also ineffective.

  Read the article

• datawind ubislate 9ci tablet computer hanging on boot

  - by user57924

  I am new to this forum. I purchased a new tablet Datawind Ubislate 9ci. It is a 9 inch no-bluetooth tablet. Details: Android 4.1.1 Rock chip RK2928 KERNEL linux version 3.0.36 I was trying to install CWM through mobile odin and ROM manager but my tablet was not supported so i downloaded build.prop editor from google play and changed it to some other cwm recognizable model viz. Samsung, nexus etc. When i was doing the above mentioned procedure, suddenly my tablet is coming up to bootloading and hanging there only and not opening i went to recovery and tried to do wipe data factory reset but failed to get opened after boot android system recovery(3e) has the following options 1)reboot system now 2)apply update from ADB 3)apply update from external storage 4)update rkimage from external storage 6)wipe data factory reset 7)wipe cache partition 8)recovery system from back up i tried to do wipe data factory reset 2-3 times but still hanging at boot i had not made any back up before this bootloop and also tried hard reset by pressing needle at the back please somebody help me to get rid of this problem and also tell me how to unlock bootloader thank you

  Read the article

• How can I create a simple Exchange 2010 backup solution?

  - by bduncanj

  I'm sure this question's been asked a dozen times in one form or another, however after much searching, there doesn't appear to be an obvious simple recovery solution for a single Exchange box. We're using Exchange 2010 on a single server, the server hosts the AD and nothing else on the network uses the AD. The intent is to run this server as you would an externally hosted Exchange server - access only via HTTP (RPC mode or OWA) - all other ports blocked. I've a daily backup running, using Windows Server 2008 volume shadow service to backup the Exchange data to an external hard disk. My question is, how do I perform a bare metal recovery of this server? 1) Do I need to be explicitly including the active directory information in this nightly backup, or will it be there by virtue of the fact that this system is the primary AD server and the Windows backup service knows this? 2) I understand I can re-install Server 2008 onto my new hardware (in the case of hardware failure) and then run Exchange 2010 setup.exe with a /recover argument, referencing the backup volume. 3) It is acceptable to have some downtime during this recovery process. But is there anything else I should be aware of? Thanks! Duncan

  Read the article

• Rackspace Ubuntu 12.04 server stuck in initramfs after kernel upgrade

  - by Znarkus

  Can't boot after I did a aptitude full-upgrade and let it update menu.lst (did a diff first and it looked good). This is what I've done so far in the BusyBox shell: mkdir /tmp/xvda1 mount /dev/xvda1 /tmp/xvda1 chroot /dev/xvda1 nano /boot/grub/menu.lst This file looks like this: title Ubuntu 12.04.1 LTS, kernel 3.2.0-31-virtual root(hd0,0) kernel /boot/vmlinuz-3.2.0-31-virtual root=UUID=/dev/xvda1 ro quiet splash initrd /boot/initrd.img-3.2.0-31-virtual title Ubuntu 12.04.1 LTS, kernel 3.2.0-31-virtual (recovery mode) root(hd0,0) kernel /boot/vmlinuz-3.2.0-31-virtual root=UUID=/dev/xvda1 ro single initrd /boot/initrd.img-3.2.0-31-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-virtual root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-virtual root=UUID=/dev/xvda1 ro quiet splash initrd/boot/initrd.img-3.2.0-24-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-virtual (recovery mode) root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-virtual root=UUID=/dev/xvda1 ro single initrd/boot/initrd.img-3.2.0-24-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-generic root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-generic root=UUID=/dev/xvda1 ro quiet splash initrd/boot/initrd.img-3.2.0-24-generic titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-generic (recovery mode) root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-generic root=UUID=/dev/xvda1 ro single initrd/boot/initrd.img-3.2.0-24-generic titleChainload into GRUB 2 root(hd0,0) kernel/boot/grub/core.img titleUbuntu 12.04.1 LTS, memtest86+ root(hd0,0) kernel/boot/memtest86+.bin From what I remember, the upgrade added the UUID= string. Should I remove these? Or rather, how do I get my system back online again? Thanks. Update: Seems like I can't even edit the file. [ Error writing /boot/grub/menu.lst: Read-only file system ]

  Read the article

• Enable bitlocker an save key to share

  - by user273694

  I have searched all over the web but cannot find a complete answer to this: How to enable Bitlocker on a laptop with TPM, and store a file with the Bitlocker recovery key and TPM password by USING THE manage-bde command line tool. The file should be the same as when created in the Bitlocker manager UI. I DO NOT want to save to AD. The same question was asked here but was not answered correctly. The goal is to write a script to be used with an endpoint manager. I have tried the following: manage-bde -on C: Works fine, but does not create or save a key. manage-bde -on C: -rk C:\myfolder\ and manage-bde -on C: -RecoveryKey C:\myfolder\ -rp The output from the last two methods state that a key has been saved to c:\myfolder and so on, but that is not the case. It also says that I have to: Save the password in a secure location Insert a USB flash drive with an external key file into the computer. Restart and run hardware test type "manage-bde -status" to check if the hardware test succeeded After a restart, I get an error saying that Bitlocker could not be enabled because the bitlocker startup key or recovery kpassword cannot be found on the USB device.... C: was not encrypted. Why am I asked to insert a USB?? I simply want to encrypt the hard drive and save the recovery information to a file automatically. Is that too much to ask? Help please!

  Read the article

• Repair Windows 2008 boot

  - by aksamit

  I have been caught in a loop where I can't boot up Windows Server 2008. When the OS starts to boot I am presented two options: Launch Startup Repair (recommended) Start Windows Normally No matter what option is chosen I end up with a black screen stating "Windows is loading files..." which takes approx 15 minutes until "System Recovery" is started. I try to run the "Startup Repair" but it reports the following error: Problem Event Name: StartupRepairOffline Problem Signature 01: 0.0.0.0 Problem Signature 02: 0.0.0.0 Problem Signature 03: unknown OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Actually no matter what other options I would try in the System Recovery they would also report some kind of error. Some other logging I have been able to extract: Diagnosis and repair details: Number of repair attempts: 1 Session details System Disk = Windows directory = AutoChk Run = 0 Number of root causes = 1 Test Performed: Name: System disk test Result: Completed successfully. Error code = 0x0 Root cause found: A hard disk could not be found. If a hard disk is installed, it is not responding. So it is actually stating that Harddisk could not be found... which to me seems to be a bit contradictious since the System Recovery just loaded all files from the hard disk it now states it cannot find. Any ideas on what other options I have?

  Read the article

• Ubuntu 12.04 can't boot after installing with software RAID 1

  - by Bill

  I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

  Read the article

• Understanding Netbook Partitions & UNR Installation

  - by Wesley

  Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I'm just looking at the Disk Management right now (in Windows XP) and I'm trying to understand what partition holds what. There is "Local Disk (C:)" which is 40GB, "RECOVERY" (no drive letter) which is 6GB and then "TEMP_PART01 (D:)" which is 103.05GB. XP is installed on Local Disk (C:) and I've only used this hard drive for all my files, etc. Recovery is recovery... probably not removable anyways. Now, what bugs me is the TEMP_PART01 (D:) partition, which contains quite a bit of random junk, such as EULA text documents, an "external installer", UI Wrapper Resource DLLs, a "VC_RED" Windows Installer Package and a few more files. I have no clue what any of it means, but I'm assuming that this was probably stuff that could have been on the Local Disk (C:), along with the WINDOWS, Program Files, and Docs and Settings folder. So, how should I go about this? Should I have kept all my data on D: and left all OS related files/folders on C:? Now, I want to install Ubuntu Netbook Remix. Question is, will this install within Windows, if I want to dual boot it? If not, would I partition D: into two small chunks, one on which I would install UNR? There are basically two questions in here, but it'd be great to get answers for both! Thanks in advance.

  Read the article

• Enable Automatic Code First Migrations On SQL Database in Azure Web Sites

  - by Steve Michelotti

  Now that Azure supports .NET Framework 4.5, you can use all the latest and greatest available features. A common scenario is to be able to use Entity Framework Code First Migrations with a SQL Database in Azure. Prior to Code First Migrations, Entity Framework provided database initializers. While convenient for demos and prototypes, database initializers weren’t useful for much beyond that because, if you delete and re-create your entire database when the schema changes, you lose all of your operational data. This is the void that Migrations are meant to fill. For example, if you add a column to your model, Migrations will alter the database to add the column rather than blowing away the entire database and re-creating it from scratch. Azure is becoming increasingly easier to use – especially with features like Azure Web Sites. Being able to use Entity Framework Migrations in Azure makes deployment easier than ever. In this blog post, I’ll walk through enabling Automatic Code First Migrations on Azure. I’ll use the Simple Membership provider for my example. First, we’ll create a new Azure Web site called “migrationstest” including creating a new SQL Database along with it:   Next we’ll go to the web site and download the publish profile:   In the meantime, we’ve created a new MVC 4 website in Visual Studio 2012 using the “Internet Application” template. This template is automatically configured to use the Simple Membership provider. We’ll do our initial Publish to Azure by right-clicking our project and selecting “Publish…”. From the “Publish Web” dialog, we’ll import the publish profile that we downloaded in the previous step:   Once the site is published, we’ll just click the “Register” link from the default site. Since the AccountController is decorated with the [InitializeSimpleMembership] attribute, the initializer will be called and the initial database is created.   We can verify this by connecting to our SQL Database on Azure with SQL Management Studio (after making sure that our local IP address is added to the list of Allowed IP Addresses in Azure): One interesting note is that these tables got created with the default Entity Framework initializer – which is to create the database if it doesn’t already exist. However, our database did already exist! This is because there is a new feature of Entity Framework 5 where Code First will add tables to an existing database as long as the target database doesn’t contain any of the tables from the model. At this point, it’s time to enable Migrations. We’ll open the Package Manger Console and execute the command: PM> Enable-Migrations -EnableAutomaticMigrations This will enable automatic migrations for our project. Because we used the "-EnableAutomaticMigrations” switch, it will create our Configuration class with a constructor that sets the AutomaticMigrationsEnabled property set to true: 1: public Configuration() 2: { 3: AutomaticMigrationsEnabled = true; 4: } We’ll now add our initial migration: PM> Add-Migration Initial This will create a migration class call “Initial” that contains the entire model. But we need to remove all of this code because our database already exists so we are just left with empty Up() and Down() methods. 1: public partial class Initial : DbMigration 2: { 3: public override void Up() 4: { 5: } 6: 7: public override void Down() 8: { 9: } 10: } If we don’t remove this code, we’ll get an exception the first time we attempt to run migrations that tells us: “There is already an object named 'UserProfile' in the database”. This blog post by Julie Lerman fully describes this scenario (i.e., enabling migrations on an existing database). Our next step is to add the Entity Framework initializer that will automatically use Migrations to update the database to the latest version. We will add these 2 lines of code to the Application_Start of the Global.asax: 1: Database.SetInitializer(new MigrateDatabaseToLatestVersion<UsersContext, Configuration>()); 2: new UsersContext().Database.Initialize(false); Note the Initialize() call will force the initializer to run if it has not been run before. At this point, we can publish again to make sure everything is still working as we are expecting. This time we’re going to specify in our publish profile that Code First Migrations should be executed:   Once we have re-published we can once again navigate to the Register page. At this point the database has not been changed but Migrations is now enabled on our SQL Database in Azure. We can now customize our model. Let’s add 2 new properties to the UserProfile class – Email and DateOfBirth: 1: [Table("UserProfile")] 2: public class UserProfile 3: { 4: [Key] 5: [DatabaseGeneratedAttribute(DatabaseGeneratedOption.Identity)] 6: public int UserId { get; set; } 7: public string UserName { get; set; } 8: public string Email { get; set; } 9: public DateTime DateOfBirth { get; set; } 10: } At this point all we need to do is simply re-publish. We’ll once again navigate to the Registration page and, because we had Automatic Migrations enabled, the database has been altered (*not* recreated) to add our 2 new columns. We can verify this by once again looking at SQL Management Studio:   Automatic Migrations provide a quick and easy way to keep your database in sync with your model without the worry of having to re-create your entire database and lose data. With Azure Web Sites you can set up automatic deployment with Git or TFS and automate the entire process to make it dead simple.

  Read the article

• Browsing Your ADF Application Module Pooling Params with WLST

  - by Duncan Mills

  In ADF 11g you can of course use Enterprise Manager (EM) to browse and configure the settings used by ADF Business Components  Application Modules, as shown here for one of my sample deployed applications. This screen you can access from the EM homepage by pulling down the Application Deployment menu, and then ADF > Configure ADF Business Components. Then select the profile that you are actually using (Hint: look in the DataBindings.cpx file to work this out - probably the "Local" version unless you've explicitly changed it. )So, from this screen you can change the pooling parameters and the world is good. But what if you don't have EM installed? In that case you can use the WebLogic scripting capabilities to view (and Update) the MBean Properties. Explanation The pooling parameters and many others are handled through Message Driven Beans that are created for the deployed application in the server. In the case of the ADF BC pooling parameters, this MBean will combine the configuration deployed as part of the application, along with any overrides defined as -D environement commands on the JVM startup for the application server instance. Using WLST to Browse the Bean ValuesFor our purposes here I'm doing this interactively, although you can also write a script or write Java to achieve the same thing.Step 0: Before You Start You will need the followingAccess to the console on the machine that is running the serverThe WebLogic Admin username and password (I'll use weblogic/password as my example here - yours will be different)The name of the deployed application (in this example FMWdh_application1)The package path to the bc4j.xcfg file (in this example oracle.demo.fmwdh.model.service.common.bc4j.xcfg) This is based on the default path for your model project so it shoudl be fairly easy to work out.The BC configuration your AM is actually running with (look in the DataBindings.cpx for that. In this example DealHelpServiceDeployed is the profile being used..)Step 1: Start the WLST consoleTo start at the beginning, you need to run the WLST command but that needs a little setup:Change to the wlserver_10.3/server/bin directory e.g. under your Fusion Middleware Home[oracle@mymachine] cd /home/oracle/FMW_R1/wlserver_10.3/server/binSet your environment using the setWLSEnv script. e.g. on Oracle Enterprise Linux:[oracle@mymachine bin] source setWLSEnv.shStart the WLST interactive console[oracle@mymachine bin] java weblogic.WLSTInitializing WebLogic Scripting Tool (WLST) ...Welcome to WebLogic Server Administration Scripting ShellType help() for help on available commandswls:/offline> Step 2:Enter the WLST commandsConnect to the server wls:> connect('weblogic','password')Change to the Custom root, this is where the AMPooling MBeans are registered wls:> custom()Change to the b4j MBean directorywls:> cd ('oracle.bc4j.mbean.config')Work out the correct directory for the AM configuration you need. This is the difficult bit, not because it's hard to do, but because the names are long. The structure here is such that every child MBean is displayed at the same level as the parent, so for each deployed application there will be many directories shown. In fact, do an ls() command here and you'll see what I mean. Each application will have one MBean for the app as a whole, and then for each deployed configuration in the .xcfg file you'll see: One for the config entry itself, and then one each for Security, DB Connection and AM Pooling. So if you deploy an app with just one configuration you'll see 5 directories, if it has two configurations in the .xcfg you'll see 9 and so on.The directory you are looking for will contain those bits of information you gathered in Step 0, specifically the Application Name, the configuration you are using and the xcfg name: First of all narrow your list to just those directories returned from the ls() command that begin oracle.bc4j.mbean.config:name=AMPool. These identify the AM pooling MBeans for all the deployed applications. Now look for the correct application name e.g. Application=FMWdh_application1The config setting in that sub-list should already be correct and match what you expect e.g. oracle.bc4j.mbean.config=oracle.demo.fmwdh.model.service.common.bc4j.xcfgFinally look for the correct value for the AppModuleConfigType e.g. oracle.bc4j.mbean.config.AppModuleConfigType=DealHelpServiceDeployedNow you have identified the correct directory name, change to that (keep the name on one line of course - I've had to split it across lines here for clarity:wls:> cd ('oracle.bc4j.mbean.config:name=AMPool,     type=oracle.bc4j.mbean.config.AppModuleConfigType.AMPoolType,    oracle.bc4j.mbean.config=oracle.demo.fmwdh.model.service.common.bc4j.xcfg,    Application=FMWdh_application1,    oracle.bc4j.mbean.config.AppModuleConfigType=DealHelpServiceDeployed') Now you can actually view the parameter values with a simple ls() commandwls:> ls()And here's the output in which you can view the realtime values of the various pool settings: -rw- AmpoolConnectionstrategyclass oracle.jbo.common.ampool.DefaultConnectionStrategy -rw- AmpoolDoampooling true -rw- AmpoolDynamicjdbccredentials false -rw- AmpoolInitpoolsize 2 -rw- AmpoolIsuseexclusive true -rw- AmpoolMaxavailablesize 40 -rw- AmpoolMaxinactiveage 600000 -rw- AmpoolMaxpoolsize 4096 -rw- AmpoolMinavailablesize 2 -rw- AmpoolMonitorsleepinterval 600000 -rw- AmpoolResetnontransactionalstate true -rw- AmpoolSessioncookiefactoryclass oracle.jbo.common.ampool.DefaultSessionCookieFactory -rw- AmpoolTimetolive 3600000 -rw- AmpoolWritecookietoclient false -r-- ConfigMBean true -rw- ConnectionPoolManager oracle.jbo.server.ConnectionPoolManagerImpl -rw- Doconnectionpooling false -rw- Dofailover false -rw- Initpoolsize 0 -rw- Maxpoolcookieage -1 -rw- Maxpoolsize 4096 -rw- Poolmaxavailablesize 25 -rw- Poolmaxinactiveage 600000 -rw- Poolminavailablesize 5 -rw- Poolmonitorsleepinterval 600000 -rw- Poolrequesttimeout 30000 -rw- Pooltimetolive -1 -r-- ReadOnly false -rw- Recyclethreshold 10 -r-- RestartNeeded false -r-- SystemMBean false -r-- eventProvider true -r-- eventTypes java.lang.String[jmx.attribute.change] -r-- objectName oracle.bc4j.mbean.config:name=AMPool,type=oracle.bc4j.mbean.config.AppModuleConfigType.AMPoolType,oracle.bc4j.mbean.config=oracle.demo.fmwdh.model.service.common.bc4j.xcfg,Application=FMWdh_application1,oracle.bc4j.mbean.config.AppModuleConfigType=DealHelpServiceDeployed -rw- poolClassName oracle.jbo.common.ampool.ApplicationPoolImpl Thanks to Brian Fry on the JDeveloper PM Team who did most of the work to put this sequence of steps together with me badgering him over his shoulder.

  Read the article

• ASP.NET MVC 3 Hosting :: ASP.NET MVC 3 First Look

  - by mbridge

  MVC 3 View Enhancements MVC 3 introduces two improvements to the MVC view engine: - Ability to select the view engine to use. MVC 3 allows you to select from any of your  installed view engines from Visual Studio by selecting Add > View (including the newly introduced ASP.NET “Razor” engine”): - Support for the next ASP.NET “Razor” syntax. The newly previewed Razor syntax is a concise lightweight syntax. MVC 3 Control Enhancements - Global Filters: ASP.NET MVC 3  allows you to specify that a filter which applies globally to all Controllers within an app by adding it to the GlobalFilters collection.  The RegisterGlobalFilters() method is now included in the default Global.asax class template and so provides a convenient place to do this since is will then be called by the Application_Start() method: void RegisterGlobalFilters(GlobalFilterCollection filters) { filters.Add(new HandleLoggingAttribute()); filters.Add(new HandleErrorAttribute()); } void Application_Start() { RegisterGlobalFilters (GlobalFilters.Filters); } - Dynamic ViewModel Property : MVC 3 augments the ViewData API with a new “ViewModel” property on Controller which is of type “dynamic” – and therefore enables you to use the new dynamic language support in C# and VB pass ViewData items using a cleaner syntax than the current dictionary API. Public ActionResult Index() { ViewModel.Message = "Hello World"; return View(); } - New ActionResult Types : MVC 3 includes three new ActionResult types and helper methods: 1. HttpNotFoundResult – indicates that a resource which was requested by the current URL was not found. HttpNotFoundResult will return a 404 HTTP status code to the calling client. 2. PermanentRedirects – The HttpRedirectResult class contains a new Boolean “Permanent” property which is used to indicate that a permanent redirect should be done. Permanent redirects use a HTTP 301 status code.  The Controller class  includes three new methods for performing these permanent redirects: RedirectPermanent(), RedirectToRoutePermanent(), andRedirectToActionPermanent(). All  of these methods will return an instance of the HttpRedirectResult object with the Permanent property set to true. 3. HttpStatusCodeResult – used for setting an explicit response status code and its associated description. MVC 3 AJAX and JavaScript Enhancements MVC 3 ships with built-in JSON binding support which enables action methods to receive JSON-encoded data and then model-bind it to action method parameters. For example a jQuery client-side JavaScript could define a “save” event handler which will be invoked when the save button is clicked on the client. The code in the event handler then constructs a client-side JavaScript “product” object with 3 fields with their values retrieved from HTML input elements. Finally, it uses jQuery’s .ajax() method to POST a JSON based request which contains the product to a /theStore/UpdateProduct URL on the server: $('#save').click(function () { var product = { ProdName: $('#Name').val() Price: $('#Price').val(), } $.ajax({ url: '/theStore/UpdateProduct', type: "POST"; data: JSON.stringify(widget), datatype: "json", contentType: "application/json; charset=utf-8", success: function () { $('#message').html('Saved').fadeIn(), }, error: function () { $('#message').html('Error').fadeIn(), } }); return false; }); MVC will allow you to implement the /theStore/UpdateProduct URL on the server by using an action method as below. The UpdateProduct() action method will accept a strongly-typed Product object for a parameter. MVC 3 can now automatically bind an incoming JSON post value to the .NET Product type on the server without having to write any custom binding. [HttpPost] public ActionResult UpdateProduct(Product product) { // save logic here return null } MVC 3 Model Validation Enhancements MVC 3 builds on the MVC 2 model validation improvements by adding   support for several of the new validation features within the System.ComponentModel.DataAnnotations namespace in .NET 4.0: - Support for the new DataAnnotations metadata attributes like DisplayAttribute. - Support for the improvements made to the ValidationAttribute class which now supports a new IsValid overload that provides more info on  the current validation context, like what object is being validated. - Support for the new IValidatableObject interface which enables you to perform model-level validation and also provide validation error messages which are specific to the state of the overall model. MVC 3 Dependency Injection Enhancements MVC 3 includes better support for applying Dependency Injection (DI) and also integrating with Dependency Injection/IOC containers. Currently MVC 3 Preview 1 has support for DI in the below places: - Controllers (registering & injecting controller factories and injecting controllers) - Views (registering & injecting view engines, also for injecting dependencies into view pages) - Action Filters (locating and  injecting filters) And this is another important blog about Microsoft .NET and technology: - Windows 2008 Blog - SharePoint 2010 Blog - .NET 4 Blog And you can visit here if you're looking for ASP.NET MVC 3 hosting

  Read the article

• ASSIMP in my program is much slower to import than ASSIMP view program

  - by Marco

  The problem is really simple: if I try to load with the function aiImportFileExWithProperties a big model in my software (around 200.000 vertices), it takes more than one minute. If I try to load the very same model with ASSIMP view, it takes 2 seconds. For this comparison, both my software and Assimp view are using the dll version of the library at 64 bit, compiled by myself (Assimp64.dll). This is the relevant piece of code in my software // default pp steps unsigned int ppsteps = aiProcess_CalcTangentSpace | // calculate tangents and bitangents if possible aiProcess_JoinIdenticalVertices | // join identical vertices/ optimize indexing aiProcess_ValidateDataStructure | // perform a full validation of the loader's output aiProcess_ImproveCacheLocality | // improve the cache locality of the output vertices aiProcess_RemoveRedundantMaterials | // remove redundant materials aiProcess_FindDegenerates | // remove degenerated polygons from the import aiProcess_FindInvalidData | // detect invalid model data, such as invalid normal vectors aiProcess_GenUVCoords | // convert spherical, cylindrical, box and planar mapping to proper UVs aiProcess_TransformUVCoords | // preprocess UV transformations (scaling, translation ...) aiProcess_FindInstances | // search for instanced meshes and remove them by references to one master aiProcess_LimitBoneWeights | // limit bone weights to 4 per vertex aiProcess_OptimizeMeshes | // join small meshes, if possible; aiProcess_SplitByBoneCount | // split meshes with too many bones. Necessary for our (limited) hardware skinning shader 0; cout << "Loading " << pFile << "... "; aiPropertyStore* props = aiCreatePropertyStore(); aiSetImportPropertyInteger(props,AI_CONFIG_IMPORT_TER_MAKE_UVS,1); aiSetImportPropertyFloat(props,AI_CONFIG_PP_GSN_MAX_SMOOTHING_ANGLE,80.f); aiSetImportPropertyInteger(props,AI_CONFIG_PP_SBP_REMOVE, aiPrimitiveType_LINE | aiPrimitiveType_POINT); aiSetImportPropertyInteger(props,AI_CONFIG_GLOB_MEASURE_TIME,1); //aiSetImportPropertyInteger(props,AI_CONFIG_PP_PTV_KEEP_HIERARCHY,1); // Call ASSIMPs C-API to load the file scene = (aiScene*)aiImportFileExWithProperties(pFile.c_str(), ppsteps | /* default pp steps */ aiProcess_GenSmoothNormals | // generate smooth normal vectors if not existing aiProcess_SplitLargeMeshes | // split large, unrenderable meshes into submeshes aiProcess_Triangulate | // triangulate polygons with more than 3 edges //aiProcess_ConvertToLeftHanded | // convert everything to D3D left handed space aiProcess_SortByPType | // make 'clean' meshes which consist of a single typ of primitives 0, NULL, props); aiReleasePropertyStore(props); if(!scene){ cout << aiGetErrorString() << endl; return 0; } this is the relevant piece of code in assimp view code // default pp steps unsigned int ppsteps = aiProcess_CalcTangentSpace | // calculate tangents and bitangents if possible aiProcess_JoinIdenticalVertices | // join identical vertices/ optimize indexing aiProcess_ValidateDataStructure | // perform a full validation of the loader's output aiProcess_ImproveCacheLocality | // improve the cache locality of the output vertices aiProcess_RemoveRedundantMaterials | // remove redundant materials aiProcess_FindDegenerates | // remove degenerated polygons from the import aiProcess_FindInvalidData | // detect invalid model data, such as invalid normal vectors aiProcess_GenUVCoords | // convert spherical, cylindrical, box and planar mapping to proper UVs aiProcess_TransformUVCoords | // preprocess UV transformations (scaling, translation ...) aiProcess_FindInstances | // search for instanced meshes and remove them by references to one master aiProcess_LimitBoneWeights | // limit bone weights to 4 per vertex aiProcess_OptimizeMeshes | // join small meshes, if possible; aiProcess_SplitByBoneCount | // split meshes with too many bones. Necessary for our (limited) hardware skinning shader 0; aiPropertyStore* props = aiCreatePropertyStore(); aiSetImportPropertyInteger(props,AI_CONFIG_IMPORT_TER_MAKE_UVS,1); aiSetImportPropertyFloat(props,AI_CONFIG_PP_GSN_MAX_SMOOTHING_ANGLE,g_smoothAngle); aiSetImportPropertyInteger(props,AI_CONFIG_PP_SBP_REMOVE,nopointslines ? aiPrimitiveType_LINE | aiPrimitiveType_POINT : 0 ); aiSetImportPropertyInteger(props,AI_CONFIG_GLOB_MEASURE_TIME,1); //aiSetImportPropertyInteger(props,AI_CONFIG_PP_PTV_KEEP_HIERARCHY,1); // Call ASSIMPs C-API to load the file g_pcAsset->pcScene = (aiScene*)aiImportFileExWithProperties(g_szFileName, ppsteps | /* configurable pp steps */ aiProcess_GenSmoothNormals | // generate smooth normal vectors if not existing aiProcess_SplitLargeMeshes | // split large, unrenderable meshes into submeshes aiProcess_Triangulate | // triangulate polygons with more than 3 edges aiProcess_ConvertToLeftHanded | // convert everything to D3D left handed space aiProcess_SortByPType | // make 'clean' meshes which consist of a single typ of primitives 0, NULL, props); aiReleasePropertyStore(props); As you can see the code is nearly identical because I copied from assimp view. What could be the reason for such a difference in performance? The two software are using the same dll Assimp64.dll (compiled in my computer with vc++ 2010 express) and the same function aiImportFileExWithProperties to load the model, so I assume that the actual code employed is the same. How is it possible that the function aiImportFileExWithProperties is 100 times slower when called by my sotware than when called by assimp view? What am I missing? I am not good with dll, dynamic and static libraries so I might be missing something obvious. ------------------------------ UPDATE I found out the reason why the code is going slower. Basically I was running my software with "Start debugging" in VC++ 2010 Express. If I run the code outside VC++ 2010 I get same performance of assimp view. However now I have a new question. Why does the dll perform slower in VC++ debugging? I compiled it in release mode without debugging information. Is there any way to have the dll go fast in debugmode i.e. not debugging the dll? Because I am interested in debugging only my own code, not the dll that I assume is already working fine. I do not want to wait 2 minutes every time I want to load my software to debug. Does this request make sense?

  Read the article

• Execute TSQL statement with ExecuteStoreQuery in entity framework 4.0

  - by Jalpesh P. Vadgama

  I was playing with entity framework in recent days and I was searching something that how we can execute TSQL statement in entity framework. And I have found one great way to do that with entity framework ‘ExecuteStoreQuery’ method. It’s executes a TSQL statement against data source given enity framework context and returns strongly typed result. You can find more information about ExcuteStoreQuery from following link. http://msdn.microsoft.com/en-us/library/dd487208.aspx So let’s examine how it works. So Let’s first create a table against which we are going to execute TSQL statement. So I have added a SQL Express database as following. Now once we are done with adding a database let’s add a table called Client like following. Here you can see above Client table is very simple. There are only two fields ClientId and ClientName where ClientId is primary key and ClientName is field where we are going to store client name. Now it’s time to add some data to the table. So I have added some test data like following. Now it’s time to add entity framework model class. So right click project->Add new item and select ADO.NET entity model as following. After clicking on add button a wizard will start it will ask whether we need to create model classes from database or not but we already have our client table ready so I have selected generate from database as following. Once you process further in wizard it will be presented a screen where we can select the our table like following. Now once you click finish it will create model classes with for us. Now we need a gridview control where we need to display those data. So in Default.aspx page I have added a grid control like following. <%@ Page Title="Home Page" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="EntityFramework._Default" %> <asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent"> </asp:Content> <asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent"> <h2> Welcome to ASP.NET! </h2> <p> To learn more about ASP.NET visit <a href="http://www.asp.net" title="ASP.NET Website">www.asp.net</a>. </p> <p> You can also find <a href="http://go.microsoft.com/fwlink/?LinkID=152368&amp;clcid=0x409" title="MSDN ASP.NET Docs">documentation on ASP.NET at MSDN</a>. <asp:GridView ID="grdClient" runat="server"> </asp:GridView> </p> </asp:Content> Now once we are done with adding Gridview its time to write code for server side. So I have written following code in Page_load event of default.aspx page. protected void Page_Load(object sender, EventArgs e) { if (!Page.IsPostBack) { using (var context = new EntityFramework.TestEntities()) { ObjectResult<Client> result = context.ExecuteStoreQuery<Client>("Select * from Client"); grdClient.DataSource = result; grdClient.DataBind(); } } } Here in the above code you can see that I have written create a object of our entity model and then with the help of the ExecuteStoreQuery method I have execute a simple select TSQL statement which will return a object result. I have bind that object result with gridview to display data. So now we are done with coding.So let’s run application in browser. Following is output as expected. That’s it. Hope you like it. Stay tuned for more..Till then happy programming.

  Read the article

• The Virtues and Challenges of Implementing Basel III: What Every CFO and CRO Needs To Know

  - by Jenna Danko

  The Basel Committee on Banking Supervision (BCBS) is a group tasked with providing thought-leadership to the global banking industry.  Over the years, the BCBS has released volumes of guidance in an effort to promote stability within the financial sector.  By effectively communicating best-practices, the Basel Committee has influenced financial regulations worldwide.  Basel regulations are intended to help banks: More easily absorb shocks due to various forms of financial-economic stress Improve risk management and governance Enhance regulatory reporting and transparency In June 2011, the BCBS released Basel III: A global regulatory framework for more resilient banks and banking systems.  This new set of regulations included many enhancements to previous rules and will have both short and long term impacts on the banking industry.  Some of the key features of Basel III include: A stronger capital base More stringent capital standards and higher capital requirements Introduction of capital buffers  Additional risk coverage Enhanced quantification of counterparty credit risk Credit valuation adjustments  Wrong  way risk  Asset Value Correlation Multiplier for large financial institutions Liquidity management and monitoring Introduction of leverage ratio Even more rigorous data requirements To implement these features banks need to embark on a journey replete with challenges. These can be categorized into three key areas: Data, Models and Compliance. Data Challenges Data quality - All standard dimensions of Data Quality (DQ) have to be demonstrated.  Manual approaches are now considered too cumbersome and automation has become the norm. Data lineage - Data lineage has to be documented and demonstrated.  The PPT / Excel approach to documentation is being replaced by metadata tools.  Data lineage has become dynamic due to a variety of factors, making static documentation out-dated quickly.  Data dictionaries - A strong and clean business glossary is needed with proper identification of business owners for the data.  Data integrity - A strong, scalable architecture with work flow tools helps demonstrate data integrity.  Manual touch points have to be minimized.   Data relevance/coverage - Data must be relevant to all portfolios and storage devices must allow for sufficient data retention.  Coverage of both on and off balance sheet exposures is critical.   Model Challenges Model development - Requires highly trained resources with both quantitative and subject matter expertise. Model validation - All Basel models need to be validated. This requires additional resources with skills that may not be readily available in the marketplace.  Model documentation - All models need to be adequately documented.  Creation of document templates and model development processes/procedures is key. Risk and finance integration - This integration is necessary for Basel as the Allowance for Loan and Lease Losses (ALLL) is calculated by Finance, yet Expected Loss (EL) is calculated by Risk Management – and they need to somehow be equal.  This is tricky at best from an implementation perspective.  Compliance Challenges Rules interpretation - Some Basel III requirements leave room for interpretation.  A misinterpretation of regulations can lead to delays in Basel compliance and undesired reprimands from supervisory authorities. Gap identification and remediation - Internal identification and remediation of gaps ensures smoother Basel compliance and audit processes.  However business lines are challenged by the competing priorities which arise from regulatory compliance and business as usual work.  Qualification readiness - Providing internal and external auditors with robust evidence of a thorough examination of the readiness to proceed to parallel run and Basel qualification  In light of new regulations like Basel III and local variations such as the Dodd Frank Act (DFA) and Comprehensive Capital Analysis and Review (CCAR) in the US, banks are now forced to ask themselves many difficult questions.  For example, executives must consider: How will Basel III play into their Risk Appetite? How will they create project plans for Basel III when they haven’t yet finished implementing Basel II? How will new regulations impact capital structure including profitability and capital distributions to shareholders? After all, new regulations often lead to diminished profitability as well as an assortment of implementation problems as we discussed earlier in this note.  However, by requiring banks to focus on premium growth, regulators increase the potential for long-term profitability and sustainability.  And a more stable banking system: Increases consumer confidence which in turn supports banking activity  Ensures that adequate funding is available for individuals and companies Puts regulators at ease, allowing bankers to focus on banking Stability is intended to bring long-term profitability to banks.  Therefore, it is important that every banking institution takes the steps necessary to properly manage, monitor and disclose its risks.  This can be done with the assistance and oversight of an independent regulatory authority.  A spectrum of banks exist today wherein some continue to debate and negotiate with regulators over the implementation of new requirements, while others are simply choosing to embrace them for the benefits I highlighted above. Do share with me how your institution is coping with and embracing these new regulations within your bank. Dr. Varun Agarwal is a Principal in the Banking Practice for Capgemini Financial Services.  He has over 19 years experience in areas that span from enterprise risk management, credit, market, and to country risk management; financial modeling and valuation; and international financial markets research and analyses.

  Read the article

• Stumbling Through: Visual Studio 2010 (Part II)

  I would now like to expand a little on what I stumbled through in part I of my Visual Studio 2010 post and touch on a few other features of VS 2010.  Specifically, I want to generate some code based off of an Entity Framework model and tie it up to an actual data source.  Im not going to take the easy way and tie to a SQL Server data source, though, I will tie it to an XML data file instead.  Why?  Well, why not?  This is purely for learning, there are probably much better ways to get strongly-typed classes around XML but it will force us to go down a path less travelled and maybe learn a few things along the way.  Once we get this XML data and the means to interact with it, I will revisit data binding to this data in a WPF form and see if I cant get reading, adding, deleting, and updating working smoothly with minimal code.  To begin, I will use what was learned in the first part of this blog topic and draw out a data model for the MFL (My Football League) - I dont want the NFL to come down and sue me for using their name in this totally football-related article.  The data model looks as follows, with Teams having Players, and Players having a position and statistics for each season they played: Note that when making the associations between these entities, I was given the option to create the foreign key but I only chose to select this option for the association between Player and Position.  The reason for this is that I am picturing the XML that will contain this data to look somewhat like this: <MFL> <Position/> <Position/> <Position/> <Team>     <Player>         <Statistic/>     </Player> </Team> </MFL> Statistic will be under its associated Player node, and Player will be under its associated Team node no need to have an Id to reference it if we know it will always fall under its parent.  Position, however, is more of a lookup value that will not have any hierarchical relationship to the player.  In fact, the Position data itself may be in a completely different xml file (something Id like to play around with), so in any case, a player will need to reference the position by its Id. So now that we have a simple data model laid out, I would like to generate two things based on it:  A class for each entity with properties corresponding to each entity property An IO class with methods to get data for each entity, either all instances, by Id or by parent. Now my experience with code generation in the past has consisted of writing up little apps that use the code dom directly to regenerate code on demand (or using tools like CodeSmith).  Surely, there has got to be a more fun way to do this given that we are using the Entity Framework which already has built-in code generation for SQL Server support.  Lets start with that built-in stuff to give us a base to work off of.  Right click anywhere in the canvas of our model and select Add Code Generation Item: So just adding that code item seemed to do quite a bit towards what I was intending: It apparently generated a class for each entity, but also a whole ton more.  I mean a TON more.  Way too much complicated code was generated now that code is likely to be a black box anyway so it shouldnt matter, but we need to understand how to make this work the way we want it to work, so lets get ready to do some stumbling through that text template (tt) file. When I open the .tt file that was generated, right off the bat I realize there is going to be trouble there is no color coding, no intellisense no nothing!  That is going to make stumbling through more like groping blindly in the dark while handcuffed and hopping on one foot, which was one of the alternate titles I was considering for this blog.  Thankfully, the community comes to my rescue and I wont have to cast my mind back to the glory days of coding in VI (look it up, kids).  Using the Extension Manager (Available under the Tools menu), I did a quick search for tt editor in the Online Gallery and quickly found the Tangible T4 Editor: Downloading and installing this was a breeze, and after doing so I got some color coding and intellisense while editing the tt files.  If you will be doing any customizing of tt files, I highly recommend installing this extension.  Next, well see if that is enough help for us to tweak that tt file to do the kind of code generation that we wantDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Taking the Plunge - or Dipping Your Toe - into the Fluffy IAM Cloud by Paul Dhanjal (Simeio Solutions)

  - by Greg Jensen

  In our last three posts, we’ve examined the revolution that’s occurring today in identity and access management (IAM). We looked at the business drivers behind the growth of cloud-based IAM, the shortcomings of the old, last-century IAM models, and the new opportunities that federation, identity hubs and other new cloud capabilities can provide by changing the way you interact with everyone who does business with you. In this, our final post in the series, we’ll cover the key things you, the enterprise architect, should keep in mind when considering moving IAM to the cloud. Invariably, what starts the consideration process is a burning business need: a compliance requirement, security vulnerability or belt-tightening edict. Many on the business side view IAM as the “silver bullet” – and for good reason. You can almost always devise a solution using some aspect of IAM. The most critical question to ask first when using IAM to address the business need is, simply: is my solution complete? Typically, “business” is not focused on the big picture. Understandably, they’re focused instead on the need at hand: Can we be HIPAA compliant in 6 months? Can we tighten our new hire, employee transfer and termination processes? What can we do to prevent another password breach? Can we reduce our service center costs by the end of next quarter? The business may not be focused on the complete set of services offered by IAM but rather a single aspect or two. But it is the job – indeed the duty – of the enterprise architect to ensure that all aspects are being met. It’s like remodeling a house but failing to consider the impact on the foundation, the furnace or the zoning or setback requirements. While the homeowners may not be thinking of such things, the architect, of course, must. At Simeio Solutions, the way we ensure that all aspects are being taken into account – to expose any gaps or weaknesses – is to assess our client’s IAM capabilities against a five-step maturity model ranging from “ad hoc” to “optimized.” The model we use is similar to Capability Maturity Model Integration (CMMI) developed by the Software Engineering Institute (SEI) at Carnegie Mellon University. It’s based upon some simple criteria, which can provide a visual representation of how well our clients fair when evaluated against four core categories: ·         Program Governance ·         Access Management (e.g., Single Sign-On) ·         Identity and Access Governance (e.g., Identity Intelligence) ·         Enterprise Security (e.g., DLP and SIEM) Often our clients believe they have a solution with all the bases covered, but the model exposes the gaps or weaknesses. The gaps are ideal opportunities for the cloud to enter into the conversation. The complete process is straightforward: 1.    Look at the big picture, not just the immediate need – what is our roadmap and how does this solution fit? 2.    Determine where you stand with respect to the four core areas – what are the gaps? 3.    Decide how to cover the gaps – what role can the cloud play? Returning to our home remodeling analogy, at some point, if gaps or weaknesses are discovered when evaluating the complete impact of the proposed remodel – if the existing foundation wouldn’t support the new addition, for example – the owners need to decide if it’s time to move to a new house instead of trying to remodel the old one. However, with IAM it’s not an either-or proposition – i.e., either move to the cloud or fix the existing infrastructure. It’s possible to use new cloud technologies just to cover the gaps. Many of our clients start their migration to the cloud this way, dipping in their toe instead of taking the plunge all at once. Because our cloud services offering is based on the Oracle Identity and Access Management Suite, we can offer a tremendous amount of flexibility in this regard. The Oracle platform is not a collection of point solutions, but rather a complete, integrated, best-of-breed suite. Yet it’s not an all-or-nothing proposition. You can choose just the features and capabilities you need using a pay-as-you-go model, incrementally turning on and off services as needed. Better still, all the other capabilities are there, at the ready, whenever you need them. Spooling up these cloud-only services takes just a fraction of the time it would take a typical organization to deploy internally. SLAs in the cloud may be higher than on premise, too. And by using a suite of software that’s complete and integrated, you can dramatically lower cost and complexity. If your in-house solution cannot be migrated to the cloud, you might consider using hardware appliances such as Simeio’s Cloud Interceptor to extend your enterprise out into the network. You might also consider using Expert Managed Services. Cost is usually the key factor – not just development costs but also operational sustainment costs. Talent or resourcing issues often come into play when thinking about sustaining a program. Expert Managed Services such as those we offer at Simeio can address those concerns head on. In a cloud offering, identity and access services lend to the new paradigms described in my previous posts. Most importantly, it allows us all to focus on what we're meant to do – provide value, lower costs and increase security to our respective organizations. It’s that magic “silver bullet” that business knew you had all along. If you’d like to talk more, you can find us at simeiosolutions.com.

  Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >