Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 178/370 | < Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >

• Slow write speeds on new Gigabit home file server

  - by Ryan Holder

  So I finally got all my parts delivered to setup a home file/backup server this week. It's currently running Ubuntu Server and I'm using Samba to share files on my network. The server currently has a 2TB WD Green drive in it connected to a Asus M5A78L-M This is then connected via CAT6a to my new Gigabit switch (TP-Link TL-SG1005D). My home desktop is then also connected to this switch and again also through CAT6a cable. Currently when transfering files I will get a perfect 100MB/s read from the server to my Windows machine. When copying from my Windows machine to the server I get around 30/38MB/s. I know this drive is capable is faster speeds so would anybody have an idea of where the bottleneck is? Any help would be greatly appreciated :) EDIT: I have found ftp's write speed is much closer to what my Samba read speed is so I'm going to give it a guess that is a software problem rather than hardware

  Read the article

• Connecting two servers together - How to?

  - by Chris

  Is it possible to connect two servers running for example Windows Server 2003/2008 together. For example they are seen on the network as one server with the combination of all HDD from each server? Example: \\Server1 - 1 x 1tb hdd \\Server2 - 1 x 1tb hdd I would like users of the network to be able to store their documents on both servers for load balancing. So basically a RAID between the two servers? Any help would be appreciated.

  Read the article

• Using PVLANs with normal VLANs in a trunked environment

  - by user974896

  Assume a trunked environment with two switches, S1 and S2. The swtiches are connected with a trunk port designed to pass VLAN 26. What would happen if VLAN 26 on S2 is configured as a private-vlan with the default gateway and DHCP server and default gateway as promisc ports. What if S1's VLAN 26 is configured as a standard VLAN. Would the hosts on S1 be able to communicate with the promisc ports on S2? Would they be able to communicate with the hosts on S2? To further complicate things what if the DHCP server were to reside on S1 and I wanted S2 to have private VLANS with promisc ports as the gateway and DHCP server while still leaving S1 in a standard vlan configuration.

  Read the article

• IP to IP forwarding with iptables [centos]

  - by FunkyChicken

  I have 2 servers. Server 1 with ip 1.1.1.1 and server 2 with ip 2.2.2.2 My domain example.com points to 1.1.1.1 at the moment, but very soon I'm going to switch to ip 2.2.2.2. I have already setup a low TTL for domain example.com, but some people will still hit the old ip a after I change the ip address of the domain. Now both machines run centos 5.8 with iptables and nginx as a webserver. I want to forward all traffic that still hits server 1.1.1.1 to 2.2.2.2 so there won't be any downtime. Now I found this tutorial: http://www.debuntu.org/how-to-redirecting-network-traffic-a-new-ip-using-iptables but I cannot seem to get it working. I have enabled ip forwarding: echo "1" > /proc/sys/net/ipv4/ip_forward After that I ran these 2 commands: /sbin/iptables -t nat -A PREROUTING -s 1.1.1.1 -p tcp --dport 80 -j DNAT --to-destination 2.2.2.2:80 /sbin/iptables -t nat -A POSTROUTING -j MASQUERADE But when I load http://1.1.1.1 in my browser, I still get the pages hosted on 1.1.1.1 and not the content from 2.2.2.2. What am I doing wrong?

  Read the article

• Why are there so few Wireless N Dual Band adapter PCI cards, only USB adapters instead?

  - by daiphoenix

  There has been several Wireless N Dual Band routers/APs out in the market for quite some time now, and there are several Wireless N Dual Band USB adapters out there. But as for PCI/PCI-X card adapters, there seems to be only one (the Linksys WMP600N). Why is that? I find it very strange. Is it because the USB adapters are easier to install, and can be used on multiple computers? But if so, why isn't it the same case with single band (2.4 Ghz) wireless N adapters? Because for these ones there as many PCI card adapters as there are USB adapters. Also, can the USB adapters, despite the lack of external antenna, offer the same level of performance as a card with external antennas?

  Read the article

• Is there a standard method for assigning nameservers to servers in a Windows domain?

  - by HopelessN00b

  As the title asks, I'm wondering if there's any standard or "best practice" for how to actually assign nameservers (DNS) and manage the nameserver configuration for client servers on a Windows domain. I'm talking about the setting circled in the below image, in case the language of the question is not clear enough: This is for a large, multi-site environment, where ideally/hopefully all servers point at their site's Domain Controller as the primary DNS server, and a DNS server at a different site as the secondary DNS server. For simplicity's sake, we can say that the secondary server would be the Domain Controller at the home site for everyone, and there are no tertiary DNS servers (even though that's not actually the case). Try as I might, I can't seem to find a GPO setting for this (at least on FL 2003 R2, the Computer Configuration - Administrative Templates - Network - DNS Client - DNS Servers GPO is Supported on: Windows XP Professional only), and I find it rather hard to believe that the "best"/"standard" solution would therefore be either scripting up something to apply the DNS settings per site, or using a DHCP server to push those configurations out to the other servers via the DHCP Scope Options. So, is there a standard way of managing this configuration? (That's hopefully not "a script" or "DHCP Scope Option.)

  Read the article

• Unable to ssh to a Linux VM after a day

  - by jogabonito

  I have a machine running 4 VMs on it. There is one Fedora VM which is causing me some trouble. The IPs of the VMs are something like 10.100.100.* I have a Windows PC which is in the same network. It has an IP 10.100.25.77. When I reboot the Fedora VM, I am able to ping it from my Windows PC as well as use putty to ssh to it. The next day, I cant ping it or ssh from my Windows PC. However I can ping and ssh to the other VMs on the machine. If I ssh to one of the other VMs, I can ping and ssh to the Fedora VM. Next if I restart it, things get back to normal and I can access it without any issues. The IP of the VM doesn't change after rebooting and it is statically assigned I would like to know what is causing this and how to get it fixed. As a last resort, I am thinking of running a cron job to restart the VM every night, it is not a critical server, but will be generally used occasionally in the day time.

  Read the article

• Network with bridge and port forwarding?

  - by rafek

  Hi! Below is my current (and planned) home network configuration. I would like to connect my non-wifi-capable desktop to my home network. The question is: HOW? What device do I need? The primary requiremen is that I need to be able to forward ports to my desktop. How would I achieve this? Is there something like "double port forwarding"? Could anyone please explain this configuration to me? Thank you in advance!

  Read the article

• What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

  - by Alex R

  I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

  Read the article

• Connecting office to data center via Metro-ethernet

  - by Eric

  I am installing a metro ethernet link from my office to my data center. The office will have a cisco 3750 with several vlans. The data center end will have a more complicated set up. The metro e from the office will connect to a 2960, which will have two other 2960s with a few vlans and a 2811 router connected to it for connectivity to our other environments and the internet. I am looking at implementing this by connecting the office 3750 and the data center 2960 with a dot1q trunk and doing all routing at the 2811. I will configure subinterfaces for gateways for each of the vlans on the 2811. I work for a small company and don't have much of a budget for an ideal architecture. I can post a simple diagram if needed for clarification. Is there anything I am missing here? I feel like I am forgetting something very basic and want to make sure I eliminate any boneheaded mistakes.

  Read the article

• DD-WRT Router Can't hold a connection after initial setup...

  - by AC

  Struggeling with my new DDWRT router (Buffalo WZR-HP-G300NH) configuration. I configured it using one machine while comparing the settings on my existing Linksys WRT54GL on another machine. To the best of my knowledge, I've set it up the same way as my Linksys, but DDWRT has so many other options. After configuring it, I plugged it into the modem, VOIP device & my network. I see the phones come back online. However after a few minutes, it seems I lose the outbound connection (phones die and I can't get out over HTTP). What's confusing me is it works for a few minutes, then it fails. No idea what to look for. Ideas?

  Read the article

• How to set a static route for an external IP address

  - by HorusKol

  Further to my earlier question about bridging different subnets - I now need to route requests for one particular IP address differently to all other traffic. I have the following routing in my iptables on our router: # Allow established connections, and those !not! coming from the public interface # eth0 = public interface # eth1 = private interface #1 (10.1.1.0/24) # eth2 = private interface #2 (129.2.2.0/25) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth2 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the private interfaces iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -A FORWARD -i eth2 -o eth0 -j ACCEPT # Allow the two private connections to talk to each other iptables -A FORWARD -i eth1 -o eth2 -j ACCEPT iptables -A FORWARD -i eth2 -o eth1 -j ACCEPT # Masquerade (NAT) iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Don't forward any other traffic from the public to the private iptables -A FORWARD -i eth0 -o eth1 -j REJECT iptables -A FORWARD -i eth0 -o eth2 -j REJECT This configuration means that users will be forwarded through a modem/router with a public address - this is all well and good for most purposes, and in the main it doesn't matter that all computers are hidden behind the one public IP. However, some users need to be able to access a proxy at 192.111.222.111:8080 - and the proxy needs to identify this traffic as coming through a gateway at 129.2.2.126 - it won't respond otherwise. I tried adding a static route on our local gateway with: route add -host 192.111.222.111 gw 129.2.2.126 dev eth2 I can successfully ping 192.111.222.111 from the router. When I trace the route, it lists the 129.2.2.126 gateway, but I just get * on each of the following hops (I think this makes sense since this is just a web-proxy and requires authentication). When I try to ping this address from a host on the 129.2.2.0/25 network it fails. Should I do this in the iptables chain instead? How would I configure this routing?

  Read the article

• Can I create a virtual network interface to connect to a real network device?

  - by michelemarcon

  I have a networked windows pc with 2 network interfaces. The first connects to a lan with ip address 10.1.. The second connects to another lan with ip address 10.2.. Maybe it's a dumb question, however is it possible to virtualize the second network interface, so that the pc can connect to the 2 lans? If necessary, I may switch to linux or paravirtualization. CLARIFICATION: I want to send DHCP broadcast packets on the second lan, but not on the first lan. I want to do it with one single physical network interface. At the moment, I'm not using any virtualization software.

  Read the article

• How do you document a network?

  - by Esteban Araya

  I'm not sure how to ask this question, since I'm not in the field. Say you're a network admin and you leave your job. How does the new guy know where to start?

  Read the article

• Wifi Works with Android and Windows 8 but not Linux and Win 7

  - by eramm

  Support has told me that our company wide wifi network is setup to support mobile phones only. However it doesn't make sense to me that they can identify a mobile device rather they have setup the Access Point to use a protocol that is only supported on Android and Windows phones. Because the Access Point supports Windows mobile this means that laptops running Windows 8 can also connect to the Access Point (proven). So it stands to reason that since Android is based on Linux there must be a way to connect using Linux as well. iwlist shows IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : 802.1x WIreshark seems to show that a connection is being made to a website to get a certificate and use a Domain Controller for authentication. Questions: 1) what protocol could they be using that is supported on Win Mobile and Android but not on Win 7 and Linux (Debian) ? 2) what tools can I use to help me discover what protocol i need to support ? I have used iwlist and wireshark but I was not able to glean to much useful information from them. I can post the results if needed. 3) is there an app i can use on my Android phone to help me understand what kind of network it is connecting to ? I can provide more information if you tell me how to get it. I just don't know what I am looking for.

  Read the article

• Can I use two internet connections simultaneously in Windows 7?

  - by Chibueze Opata

  I have two internet connections - one via a 3G modem, and the other via wireless. The modem is faster so I normally browse with it, but it does not support torrent downloads while my wireless does. When the two are connected, my PC automatically makes every connection through the modem. Is there a way I can force a particular program, eg. uTorrent to browse through my wireless internet connection instead? Thanks.

  Read the article

• How to connect the virtual networks of vmware guests running on different hosts?

  - by gyrolf

  In a test setup, we are running several virtual machines on a single vmware workstation host. All virtual machines are connected via a "host only" network. This runs fine up to 2 or 3 virtual machines (depending on the host hardware). To allow more virtual machines, we want to use more host machines. Details about the environment and applications: Host PCs are running Windows XP in a corporate intranet. VMware used is Workstation 6.5 Guests are running Windows Server 2003 All guests act as Web Servers One of the guests additionally acts as Windows File server, offering shared folders for the other guests to connect to. Restrictions: VMware guests shall not be visible from the intranet. Changes to the host PC are restricted by corporate policy. In the virtual network, no domain controller exists. All virtual machines are member of the same workgroup. Running the virtual network as NAT is possible. Port forwarding might be used if it does not conflict with ports used by the host PC. Looking for a solution, I found hints about using router or vpn software on the hosts, but without any details how to setup. (I found a similar question Sharing the network between 2 VMware hosts, but the answer was not sufficient for me.)

  Read the article

• Export/Import Windows XP wireless configs

  - by blunders

  About to rebuild my XP install and figured I'd see if there was a file or interface for collecting the configs for the built in Windows XP wireless manager. I've looked under the "advance settings" tab and within the properties GUI for each connection and I'm not seeing a way to export the configs. Clearly if I'm exporting these I'd like to be able to import or override the default config with the backup.

  Read the article

• Any way to stop VMWare workstation from dropping SSH connections?

  - by oljones

  I have VMWare workstation 8 with a few Linux guests. I have had problems maintaining an active SSH connection to my VMs when they are in bridged mode. I first read that the onboard realtek network cards were not well supported so I bought a Intel Pro/1000 GT card. This supposedly had support. But this made no difference. Connections via SSH are active for about the first 3 minutes then hang and die. I have changed the TCP Checksum offload on the Intel and Realtek NICs, but this only works some of the time and even then not for very long. The best I could do was about 20 minutes before the connection was dropped. Any ideas?

  Read the article

• AuthInfoRequired cups overwrites

  - by mooscape

  My problem is basically identical to the following: http://bbs.archlinux.org/viewtopic.php?id=61826 Put simply, I have a machine in ubuntu trying to connect to another ubuntu machine via a network in order to use the printer attached. There is no problem printing until I restart the guest machine. Immediately it overwrites the printers.conf file (under /etc/cups/printers.conf). It always adds the same line: AuthInfoRequired username,password I stop cups and change it to *#*AuthInfoRequired username,password to comment out the command. Start cups. Works great 'til the next shutdown. Then it gets overwritten again. Googling indicates it may be GTK problem and not CUPS, but I have found no permanent solution to date. Any suggestions appreciated ....

  Read the article

• Joining a network with a Virtual Windows Server 2008 R2

  - by Triztian

  Hi all, here's my case, I have set up a share in a virtual windows server 2008 R2, the server is hosted by GoDaddy my question is, how do I access the server's public folders, I need to open a file locally (on the client) and to do that I need the server to show up in my Network locations, I have the right credentials and have created a special group that has access to the particular folder that I'm sharing the problem is I don't know how to add the server to my network locations. I have tried VPN Connection but it is my understanding that it cannot be done since it is virtual share server. Any help is trully appreciated.

  Read the article

• Can I replace a router and DHCP server without disrupting traffic?

  - by SRobertJames

  I have a device which acts as a router and DHCP server. I'm replacing it, and would like to minimize down time. If I unplug it, and plug in a different device with the same IP, will all the PCs with DHCP leases keep on working? (I have DHCP Conflict detect on, so it shouldn't reassign a DHCP address already used). What if I want to change the IP (new subnet) - is there anyway to tell all the clients (Windows PCs) to release their DHCP leases and request new ones in a minute? If before unplugging the old device, I have it release all DHCP leases, will the Windows PCs automatically ask for new DHCP addresses?

  Read the article

• Multiple WAPs: Bandwidth, Frequency Considerations

  - by Pete Cresswell

  The router in my LAN closet does 2 and 5 GHz. In the kitchen, I have a single-band 2 GHz WAP, and in the garden shed I have another single-band 2 GHz WAP. All are set to Bandwidth = 40 MHz, Wireless Network Mode = N-Only. The kitchen WAP and the LAN closet router both come up with multiple bars on my smart phone from almost anywhere in the house. The garden shed WAP will register one bar... but only sometimes. The Questions: Are these things in danger of butting heads? Should I re-set them to Bandwidth = 20 MHz? Bandwidth = Auto? Are there any tools that I could use on an Android smart phone, iPod, or WiFi-enabled laptop to make my own analysis?

  Read the article

• ftp server over internet using different port

  - by ???? ????

  I want to make my ftp server over the internet i made it on Debian linux computer and i changed the port of it to 201 my local ip is 192.168.1.3 so i can access it from any computer on my network through ftp :// mylocalip:201 it appear to me the login page i login with my linux user and can see the files on my ftp server to make it public i make port mapping on my router for port 201 when i try ftp :// mypublicip:201 it give me the login page and when i entered the login data it is loading infinity without open my ftp server files when i made it over default port 21 it works fine. can any one tell me what is the problem here?

  Read the article

• Capabilities of business and SOHO routers

  - by Q8Y

  I'm currently studying for the CCNA certifications (especially for Cisco routers and configuration). I know that business routers provide more features than SOHO routers, the processing speed and RAM can be enough. Assume I need to connect a number of users through a network (accessing internet, share files, printers, ...). I have a high speed connection to the internet and I already applied QoS. How can I find out how many users such a single (SOHO) router could handle? In my case I'd attach to it multiple switches until I have the number of ports needed. Would everything work well and smoothly with 50 users? What about 300? At which point would I need a business router instead? If I implemented VLAN here, would it make any difference in the performance? When do I really need to use more than one router? (Both SOHO and business) I'm thinking that I may need them only if I want to increase the performance (instead of replacing the existing one) and if I have multiple locations, so in this situation I need to have multiple routers, right? Put differently: Is there is a need to have another router if my business all in one place?

  Read the article

< Previous Page | 174 175 176 177 178 179 180 181 182 183 184 185  | Next Page >