home theater - Page 179

How to build Open JavaFX for Android.

- by PictureCo

Here's a short recipe for baking JavaFX for Android dalvik. We will need just a few ingredients but each one requires special care. So let's get down to the business. SourcesThe first ingredient is an open JavaFX repository. This should be piece of cake. As always there's a catch. You probably know that dalvik is jdk6 compatible and also that certain APIs are missing comparing to good old java vm from Oracle. Fortunately there is a repository which is a backport of regular OpenJFX to jdk7 and going from jdk7 to jdk6 is possible. The first thing to do is to clone or download the repository from https://bitbucket.org/narya/jfx78. Main page of the project says "It works in some cases" so we will presume that it will work in most cases As I've said dalvik vm misses some APIs which would lead to a build failures. To get them use another compatibility repository which is available on GitHub https://github.com/robovm/robovm-jfx78-compat. Download the zip and unzip sources into jfx78/modules/base.We need also a javafx binary stubs. Use jfxrt.jar from jdk8.The last thing to download are freetype sources from http://freetype.org. These will be necessary for native font rendering. Toolchain setup I have to point out that these instructions were tested only on linux. I suppose they will work with minimal changes also on Mac OS. I also presume that you were able to build open JavaFX. That means all tools like ant, gradle, gcc and jdk8 have been installed and are working all right. In addition to this you will need to download and install jdk7, Android SDK and Android NDK for native code compilation. Installing all of them will take some time. Don't forget to put them in your path. export ANDROID_SDK=/opt/android-sdk-linux export ANDROID_NDK=/opt/android-ndk-r9b export JAVA_HOME=/opt/jdk1.7.0 export PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK FreetypeUnzip freetype release sources first. We will have to cross compile them for arm. Firstly we will create a standalone toolchain for cross compiling installed in ~/work/ndk-standalone-19. $ANDROID_NDK/build/tools/make-standalone-toolchain.sh --platform=android-19 --install-dir=~/work/ndk-standalone-19 After the standalone toolchain has been created cross compile freetype with following script: export TOOLCHAIN=~/work/freetype/ndk-standalone-19 export PATH=$TOOLCHAIN/bin:$PATH export FREETYPE=`pwd` ./configure --host=arm-linux-androideabi --prefix=$FREETYPE/install --without-png --without-zlib --enable-shared sed -i 's/\-version\-info \$(version_info)/-avoid-version/' builds/unix/unix-cc.mk make make install It will compile and install freetype library into $FREETYPE/install. We will link to this install dir later on. It would be possible also to link openjfx font support dynamically against skia library available on Android which already contains freetype. It creates smaller result but can have compatibility problems. Patching Download patches javafx-android-compat.patch + android-tools.patch and patch jfx78 repository. I recommend to have look at patches. First one android-compat.patch updates openjfx build script, removes dependency on SharedSecret classes and updates LensLogger to remove dependency on jdk specific PlatformLogger. Second one android-tools.patch creates helper script in android-tools. The script helps to setup javaFX Android projects. Building Now is time to try the build. Run following script: JAVA_HOME=/opt/jdk1.7.0 JDK_HOME=/opt/jdk1.7.0 ANDROID_SDK=/opt/android-sdk-linux ANDROID_NDK=/opt/android-ndk-r9b PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK:$PATH gradle -PDEBUG -PDALVIK_VM=true -PBINARY_STUB=~/work/binary_stub/linux/rt/lib/ext/jfxrt.jar \ -PFREETYPE_DIR=~/work/freetype/install -PCOMPILE_TARGETS=android If everything went all right the output is in build/android-sdk Create first JavaFX Android project Use gradle script int android-tools. The script sets the project structure for you. Following command creates Android HelloWorld project which links to a freshly built javafx runtime and to a HelloWorld application. NAME is a name of Android project. DIR where to create our first project. PACKAGE is package name required by Android. It has nothing to do with a packaging of javafx application. JFX_SDK points to our recently built runtime. JFX_APP points to dist directory of javafx application. (where all application jars sit) JFX_MAIN is fully qualified name of a main class. gradle -PDEBUG -PDIR=/home/user/work -PNAME=HelloWorld -PPACKAGE=com.helloworld \ -PJFX_SDK=/home/user/work/jfx78/build/android-sdk -PJFX_APP=/home/user/NetBeansProjects/HelloWorld/dist \ -PJFX_MAIN=com.helloworld.HelloWorld createProject Now cd to the created project and use it like any other android project. ant clean, debug, uninstall, installd will work. I haven't tried it from any IDE Eclipse nor Netbeans. Special thanks to Stefan Fuchs and Daniel Zwolenski for the repositories used in this blog post.

Read the article

Upgrading Fusion Middleware 11.1.1.x to 11.1.1.4

- by James Taylor

This is a follow on from my previous post where we upgraded 11.1.1.2 to 11.1.1.3. The instructions I provide here will work for Fusion Middleware 11.1.1.2 and 11.1.1.3 wanting to upgrade to 11.1.1.4. In this example I’m just upgrading SOA Suite on OEL 64bit but the steps will be the same, some of the downloads may be different based on your environment. To upgrade to 11.1.1.4 you need to have access to http://support.oracle.com as this is where the downloads reside. Oracle provides 11.1.1.4 as a standalone download so you can do a fresh install if required using OTN downloads (http://www.oracle.com/technetwork/indexes/downloads/index.html). The high level steps to upgrade are as follows: Download software Shutdown you SOA Environment Upgrade WLS to 11.1.1.4 Upgrade SOA Suite to 11.1.1.4 Upgrade OSB to 11.1.1.4 Upgrade MSD Schemas Identify the downloads you require for your install. You will need the WebLogic Server Upgrade and the additional product downloads. If you are using 64bit then use the generic version. The downloads are found from the following location - http://download.oracle.com/docs/html/E18749_01/download_readme.htm#BABDDIIC For the purpose of this post I downloaded the following patches 11060985 – WLS Server Generic 11060960 – SOA Suite 11061005 – OSB Suite You must also download the 11.1.1.4 RCU tool to upgrade the DB schemas. It is available via OTN, or, Oracle Support, I have provided the link from Oracle Support. 11060956 – RCU Make sure you have set the Java executable in your PATH e.g. export PATH=$JAVA_HOME/bin:$PATH Make sure all your WebLogic environment has been shut down before performing the upgrade. Extract the WLS patch 11060985 to a temporary directory and start the installer java –jar wls1034_upgrade_generic.jar Please note if you are not running 64BIT then the upgrade executable will be just a bin file which you can execute directly. Chose the right Oracle home for your WebLogic Server install. In the Register for Security Updates you can enter your details or just click Next. If you do not enter details confirm that you don’t want to receive these updates Select the products you want to upgrade and select next. It is recommended that you accept the defaults. Confirm the directories that will be upgraded Upgrade of WLS ahs been completed Extract your both SOA downloads to a temporary directory and run the installer found in Disk1 ./runInstaller -jreLoc /java/jdk1.6.0_20/jre Please note that the java location and version may be different for your environment Skip the Software Updates Ensure your system meets the prerequisites Set the Oracle home for your SOA install. You will be asked to confirm that you want to upgrade, click Yes Choose your application server. Since you are upgrading from 11.1.1.x you will be on WebLogic Start the Install Installation Upgrade of SOA Suite completed accept the default to finish. In my environment I have OSB installed so I need to upgrade this next. If you don’t have SOA Suite you can go straight to completing the DB Schema updates at Step 24. Extract the OSB upgrade files to a temporary directory and execute the installer found in the Disk1 folder. ./runInstaller -jreLoc /java/jdk1.6.0_20/jre Skip the software updates Select the Oracle home for your environment Accept the warning to continue the upgrade Point to the location of your WebLogic Server installation Install the OSB upgrade Upgrade has been completed accept the defaults Change directory to $MW_HOME/oracle_common/bin where the Patch Set Assistant is installed Execute the following command to update the MDS schema. Please not for my examples I have the context set to DEV. your may be different. This means that all my schemas are prefixed by DEV. ./psa -dbType Oracle -dbConnectString 'localhost:1521:xe' -dbaUserName sys -schemaUserName DEV_MDS You will be asked you passwords for sys and the schema Enter the database administrator password for "sys": Enter the schema password for schema user "DEV_MDS": Change directory to $MW_HOME/Oracle_SOA1/bin to where the Patch Set Assistant is installed for SOA Suite. Execute the following command to update the SOA and BAM schemas ./psa -dbType Oracle -dbConnectString 'localhost:1521:xe' -dbaUserName sys -schemaUserName DEV_SOAINFRA To check that you have the installed correctly run the following SQL as sysdba. SELECT owner, version, status FROM schema_version_registry; OWNER VERSION STATUS ------------------------------ ------------------------------ ----------- DEV_MDS 11.1.1.4.0 VALID DEV_SOAINFRA 11.1.1.4.0 VALID Don’t stress if the versions are not all sitting at version 11.1.1.4 as not all schemas need to be updated. The key ones are MDS and SOAINFRA

Read the article

Change the Default Font Size in Word

- by Matthew Guay

Are you frustrated by always having to change the font size before you create a document it Word? Here’s how you can end that frustration and set your favorite default font size for once and for all! Microsoft changed the default font font to 11 point Calibri in Word 2007 after years of 12 point Times New Roman being the default. Although it can be easily overlooked, there are ways in Word to change the default settings to anything you want. Whether you want to change your default to 12 point Calibri or to 48 point Comic Sans…here’s how to change your default font settings in Word 2007 and 2010. Changing Default Fonts in Word To change the default font settings, click the small box with an arrow in the right left corner of the Font section of the Home tab in the Ribbon. In the Font dialog box, choose the default font settings you want. Notice in the Font box it says “+Body”; this means that the font will be chosen by the document style you choose, and you are only selecting the default font style and size. So, if your style uses Calibri, then your font will be Calibri at the size and style you chose. If you’d prefer to choose a specific font to be the default, just select one from the drop-down box and this selection will override the font selection in your document style. Here we left all the default settings, except we selected 12 point font in the Latin text box (this is your standard body text; users of Asian languages such as Chinese may see a box for Asian languages). When you’ve made your selections, click the “Set as Default” button in the bottom left corner of the dialog. You will be asked to confirm that you want these settings to be made default. In Word 2010, you will be given the option to set these settings for this document only or for all documents. Click the bullet beside “All documents based on the Normal.dotm template?”, and then click Ok. In Word 2007, simply click Ok to save these settings as default. Now, whenever you open Word or create a new document, your default font settings should be set exactly to what you want. And simply repeat these steps to change your default font settings again if you want. Editing your default template file Another way to change your default font settings is to edit your Normal.dotm file. This file is what Word uses to create new documents; it basically copies the formatting in this document each time you make a new document. To edit your Normal.dotm file, enter the following in the address bar in Explorer or in the Run prompt: %appdata%\Microsoft\Templates This will open your Office Templates folder. Right-click on the Normal.dotm file, and click Open to edit it. Note: Do not double-click on the file, as this will only create a new document based on Normal.dotm and any edits you make will not be saved in this file. Now, change any font settings as you normally would. Remember: anything you change or enter in this document will appear in any new document you create using Word. If you want to revert to your default settings, simply delete your Normal.dotm file. Word will recreate it with the standard default settings the next time you open Word. Please Note: Changing your default font size will not change the font size in existing documents, so these will still show the settings you used when these documents were created. Also, some addins can affect your Normal.dotm template. If Word does not seem to remember your font settings, try disabling Word addins to see if this helps. Conclusion Sometimes it’s the small things that can be the most frustrating. Getting your default font settings the way you want is a great way to take away a frustration and make you more productive. And here’s a quick question: Do you prefer the new default 11 point Calibri, or do you prefer 12 point Times New Roman or some other combination? Sound off in the comments, and let the world know your favorite font settings. Similar Articles Productive Geek Tips Change the Default Font in Excel 2007Add Emphasis to Paragraphs with Drop Caps in Word 2007Keep Websites From Using Tiny Fonts in SafariMake Word 2007 Always Save in Word 2003 FormatStupid Geek Tricks: Enable More Fonts for the Windows Command Prompt TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Spyware Blaster v4.3 Yes, it’s Patch Tuesday Generate Stunning Tag Clouds With Tagxedo Install, Remove and HIDE Fonts in Windows 7 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player

Read the article

Create Orchard Module in a Separate Project

- by Steve Michelotti

The Orchard Project is a new OOS Microsoft project that is being developed up on CodePlex. From the Orchard home page on CodePlex, it states “Orchard project is focused on delivering a .NET-based CMS application that will allow users to rapidly create content-driven Websites, and an extensibility framework that will allow developers and customizers to provide additional functionality through modules and themes.” The Orchard Project site contains additional information including documentation and walkthroughs. The ability to create a composite solution based on a collection of modules is a compelling feature. In Orchard, these modules can just be created as simple MVC Areas or they can also be created inside of stand-alone web application projects. The walkthrough for writing an Orchard module that is available on the Orchard site uses a simple Area that is created inside of the host application. It is based on the Orchard MIX presentation. This walkthrough does an effective job introducing various Orchard concepts such as hooking into the navigation system, theme/layout system, content types, and more. However, creating an Orchard module in a separate project does not seem to be concisely documented anywhere. Orchard ships with several module OOTB that are in separate assemblies – but again, it’s not well documented how to get started building one from scratch. The following are the steps I took to successfully get an Orchard module in a separate project up and running. Step 1 – Download the OrchardIIS.zip file from the Orchard Release page. Unzip and open up the solution. Step 2 – Add your project to the solution. I named my project “Orchard.Widget” and used and “MVC 2 Empty Web Application” project type. Make sure you put the physical path inside the “Modules” sub-folder to the main project like this: At this point the solution should look like: Step 3 – Add assembly references to Orchard.dll and Orchard.Core.dll. Step 4 – Add a controller and view. I’ll just create a Hello World controller and view. Notice I created the view as a partial view (*.ascx). Also add the [Themed] attribute to the top of the HomeController class just like the normal Orchard walk through shows it. Step 5 – Add Module.txt to the project root. The is a very important step. Orchard will not recognize your module without this text file present. It can contain just the name of your module: name: Widget Step 6 – Add Routes.cs. Notice I’ve given an area name of “Orchard.Widget” on lines 26 and 33. 1: using System; 2: using System.Collections.Generic; 3: using System.Web.Mvc; 4: using System.Web.Routing; 5: using Orchard.Mvc.Routes; 6: 7: namespace Orchard.Widget 8: { 9: public class Routes : IRouteProvider 10: { 11: public void GetRoutes(ICollection<RouteDescriptor> routes) 12: { 13: foreach (var routeDescriptor in GetRoutes()) 14: { 15: routes.Add(routeDescriptor); 16: } 17: } 18: 19: public IEnumerable<RouteDescriptor> GetRoutes() 20: { 21: return new[] { 22: new RouteDescriptor { 23: Route = new Route( 24: "Widget/{controller}/{action}/{id}", 25: new RouteValueDictionary { 26: {"area", "Orchard.Widget"}, 27: {"controller", "Home"}, 28: {"action", "Index"}, 29: {"id", ""} 30: }, 31: new RouteValueDictionary(), 32: new RouteValueDictionary { 33: {"area", "Orchard.Widget"} 34: }, 35: new MvcRouteHandler()) 36: } 37: }; 38: } 39: } 40: } Step 7 – Add MainMenu.cs. This will make sure that an item appears in the main menu called “Widget” which points to the module. 1: using System; 2: using Orchard.UI.Navigation; 3: 4: namespace Orchard.Widget 5: { 6: public class MainMenu : INavigationProvider 7: { 8: public void GetNavigation(NavigationBuilder builder) 9: { 10: builder.Add(menu => menu.Add("Widget", item => item.Action("Index", "Home", new 11: { 12: area = "Orchard.Widget" 13: }))); 14: } 15: 16: public string MenuName 17: { 18: get { return "main"; } 19: } 20: } 21: } Step 8 – Clean up web.config. By default Visual Studio adds numerous sections to the web.config. The sections that can be removed are: appSettings, connectionStrings, authentication, membership, profile, and roleManager. Step 9 – Delete Global.asax. This project will ultimately be running from inside the Orchard host so this “sub-site” should not have its own Global.asax. Now you’re ready the run the app. When you first run it, the “Widget” menu item will appear in the main menu because of the MainMenu.cs file we added: We can then click the “Widget” link in the main menu to send us over to our view: Packaging From start to finish, it’s a relatively painless experience but it could be better. For example, a Visual Studio project template that encapsulates aspects from this blog post would definitely make it a lot easier to get up and running with creating an Orchard module. Another aspect I found interesting is that if you read the first paragraph of the walkthrough, it says, “You can also develop modules as separate projects, to be packaged and shared with other users of Orchard CMS (the packaging story is still to be defined, along with marketplaces for sharing modules).” In particular, I will be extremely curious to see how the “packaging story” evolves. The first thing that comes to mind for me is: what if we explored MvcContrib Portable Areas as a potential mechanism for this packaging? This would certainly make things easy since all artifacts (aspx, aspx, images, css, javascript) are all wrapped up into a single assembly. Granted, Orchard does have its own infrastructure for layouts and themes but it seems like integrating portable areas into this pipeline would not be a difficult undertaking. Maybe that’ll be the next research task. :)

Read the article

What's going on with INETA and the Regional Speakers Bureau?

- by Chris Williams

For those of you that have been waiting patiently (and not so patiently) I'm happy to say that we're very near completion on some changes/enhancements/improvements that will allow us to finally go live with the INETA Regional Speakers Bureau. I know quite a few of you have already registered, which is great (though some of you may need to come back and update your info) and we've had a few folks submit requests, mostly in a test capacity, but soon we'll be up and live. Here's how it breaks down. Be sure to read this, because things have changed a bit from when we initially announced it. 1. The majority of our speaker/event funding is going into the Regional Speakers Bureau. The National Bureau still exists, but it's a good bit smaller than it was before, and it's not an "every group" benefit anymore. We'll be using the National Bureau as more of a strategic task force, targeting high impact events and areas that need some community building love from INETA. These will be identified and handled on a case by case basis, and may include more than just user group events. 2. You're going to get more events per group, per year than you did before. Not only are we focusing more resources on this program, but we're also making a lot of efforts to use it more effectively. With the INETA Regional Speakers Bureau, you should be able to get 2-3 INETA speakers per year, on average. Not every geographical area will have exactly the same experience, but we're doing the best we can. 3. It's not a farm team program for the National Bureau. Unsurprisingly, I managed to offend a number of people when I previously made the comment that the Regional Speakers Bureau program was a farm team or stepping stone to the National Bureau. It was a poor choice of words. Anyone can participate in the Regional Speakers Bureau, and I look forward to working with all of you. 4. There is assistance for your efforts. The exact final details are still being hammered out, but expect it to look something like this: (all distances listed are based on a round trip) Distances < 120 miles = $0 121 miles - 240 miles = $50 (effectively 1 to 2 hours, each way) 241 miles - 360 miles = $100 (effectively 2 to 3 hours, each way) 361 miles - 480 miles = $200 (effectively 3 to 4 hours, each way) For those of you who travel a lot, we're working on a solution to handle group visits when you're away from home. These will (for now) be handled on a case by case basis. 5. We're going to make it as easy as possible to work with the program. In order to do this, we need a few things from you. For speakers, that means your home address. It also means (maybe) filling out a simple 1 line expense report via the INETA website. For user groups, it means making sure your meeting address is up to date as well. 6. Distances will be automatically calculated from your home of record to the user group event and back. We realize that this is not a perfect solution to every instance, but we're not paying you to speak at an event, and you won't be taxed on this money. It's simply some assistance to make your community efforts easier. Our way of saying thanks for everything you do. 7. Sounds good so far, what's the catch? There's always a catch, right? In this case there are two of them: 1) At this time, Microsoft employees are welcome to use the website to line up speaking engagements with user groups, but are not eligible for financial assistance. 2) Anyone can register and use the website to line up speaking engagements with user groups, however you must receive and maintain a net score of 3+ positive ratings (we're implementing a thumbs up / thumbs down system) in order to receive financial assistance. These ratings are provided by the User Group leaders after the meeting has taken place. 8. Involvement by the User Group leaders is a key factor in the success of this program. Your job isn't done once you request a speaker. After you've had your meeting, it's critical that you go back to the website and take a very small survey. Doing this ensures that the speaker gets rated (and compensated if eligible) and also ensures that you can make another request, since you won't be able to make a new request if you have an old one outstanding. 9. What about Canada? We're definitely working on that. Unfortunately nothing new to report on that front, other than to say that we're trying. So... this is where things stand currently. We're working very quickly to get this in place and get speakers and groups together. If you have any questions, please leave a comment below and I'll answer them as quickly as possible. If I've forgotten anything, or if things change, I'll update it here. Thanks, Chris G. Williams INETA Board of Directors

Read the article

Switching the layout in Orchard CMS

- by Bertrand Le Roy

The UI composition in Orchard is extremely flexible, thanks in no small part to the usage of dynamic Clay shapes. Every notable UI construct in Orchard is built as a shape that other parts of the system can then party on and modify any way they want. Case in point today: modifying the layout (which is a shape) on the fly to provide custom page structures for different parts of the site. This might actually end up being built-in Orchard 1.0 but for the moment it’s not in there. Plus, it’s quite interesting to see how it’s done. We are going to build a little extension that allows for specialized layouts in addition to the default layout.cshtml that Orchard understands out of the box. The extension will add the possibility to add the module name (or, in MVC terms, area name) to the template name, or module and controller names, or module, controller and action names. For example, the home page is served by the HomePage module, so with this extension you’ll be able to add an optional layout-homepage.cshtml file to your theme to specialize the look of the home page while leaving all other pages using the regular layout.cshtml. I decided to implement this sample as a theme with code. This way, the new overrides are only enabled as the theme is activated, which makes a lot of sense as this is going to be where you’ll be creating those additional layouts. The first thing I did was to create my own theme, derived from the default TheThemeMachine with this command: codegen theme CustomLayoutMachine /CreateProject:true /IncludeInSolution:true /BasedOn:TheThemeMachine .csharpcode, .csharpcode pre { font-size: 12px; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Once that was done, I worked around a known bug and moved the new project from the Modules solution folder into Themes (the code was already physically in the right place, this is just about Visual Studio editing). The CreateProject flag in the command-line created a project file for us in the theme’s folder. This is only necessary if you want to run code outside of views from that theme. The code that we want to add is the following LayoutFilter.cs: using System.Linq; using System.Web.Mvc; using System.Web.Routing; using Orchard; using Orchard.Mvc.Filters; namespace CustomLayoutMachine.Filters { public class LayoutFilter : FilterProvider, IResultFilter { private readonly IWorkContextAccessor _wca; public LayoutFilter(IWorkContextAccessor wca) { _wca = wca; } public void OnResultExecuting(ResultExecutingContext filterContext) { var workContext = _wca.GetContext(); var routeValues = filterContext.RouteData.Values; workContext.Layout.Metadata.Alternates.Add( BuildShapeName(routeValues, "area")); workContext.Layout.Metadata.Alternates.Add( BuildShapeName(routeValues, "area", "controller")); workContext.Layout.Metadata.Alternates.Add( BuildShapeName(routeValues, "area", "controller", "action")); } public void OnResultExecuted(ResultExecutedContext filterContext) { } private static string BuildShapeName( RouteValueDictionary values, params string[] names) { return "Layout__" + string.Join("__", names.Select(s => ((string)values[s] ?? "").Replace(".", "_"))); } } } This filter is intercepting ResultExecuting, which is going to provide a context object out of which we can extract the route data. We are also injecting an IWorkContextAccessor dependency that will give us access to the current Layout object, so that we can add alternate shape names to its metadata. We are adding three possible shape names to the default, with different combinations of area, controller and action names. For example, a request to a blog post is going to be routed to the “Orchard.Blogs” module’s “BlogPost” controller’s “Item” action. Our filters will then add the following shape names to the default “Layout”: Layout__Orchard_Blogs Layout__Orchard_Blogs__BlogPost Layout__Orchard_Blogs__BlogPost__Item Those template names get mapped into the following file names by the system (assuming the Razor view engine): Layout-Orchard_Blogs.cshtml Layout-Orchard_Blogs-BlogPost.cshtml Layout-Orchard_Blogs-BlogPost-Item.cshtml This works for any module/controller/action of course, but in the sample I created Layout-HomePage.cshtml (a specific layout for the home page), Layout-Orchard_Blogs.cshtml (a layout for all the blog views) and Layout-Orchard_Blogs-BlogPost-Item.cshtml (a layout that is specific to blog posts). Of course, this is just an example, and this kind of dynamic extension of shapes that you didn’t even create in the first place is highly encouraged in Orchard. You don’t have to do it from a filter, we only did it this way because that was a good place where we could get the context that we needed. And of course, you can base your alternate shape names on something completely different from route values if you want. For example, you might want to create your own part that modifies the layout for a specific content item, or you might want to do it based on the raw URL (like it’s done in widget rules) or who knows what crazy custom rule. The point of all this is to show that extending or modifying shapes is easy, and the layout just happens to be a shape. In other words, you can do whatever you want. Ain’t that nice? The custom theme can be found here: Orchard.Theme.CustomLayoutMachine.1.0.nupkg Many thanks to Louis, who showed me how to do this.

Read the article

Bring Office 2003 Menus Back to 2010 with UBitMenu

- by Matthew Guay

Are you having trouble getting used to the Ribbon interface in Office 2010? Here’s how you can roll back the clock a bit and bring back the familiar menus and toolbars from 2003. The Office 2007 Ribbon was both praised and criticized. While many users felt they were more productive with the new interface, others felt frustrated searching for commands they had memorized in older versions of Office. Now, with Office 2010, the ribbon interface has been brought to every app in the Office suite, and is integrated into many newer programs from Microsoft. If you’re moving from Office 2003, using UBitMenu allows you to add the old familiar menus back along with the new Ribbon interface for an easier learning curve. Also, with the customizability of Office 2010, we can strip away the extra Ribbon tabs to make it more like 2003. Get the 2003 Menus and Toolbars Back in Office 2010 Download UBitMenu (link below), and install as normal. Make sure all of your Office programs are closed during the installation. This handy utility is very small, and installed amazingly quick. Open Word, Excel, or PowerPoint and there’s now a new Menu tab beside Home in the Ribbon. Now you can access all of your favorite old Office commands in the familiar menus, and access many of the newer Office features such as SmartArt. Here’s a close-up of the toolbar. Notice that the layout is very similar to that of Word 2003. You can access all of the new Transitions in PowerPoint 2010 from the menu bar. The menu in Excel even included support for the new PivotTable and PivotCharts Wizard. One problem we noticed was that the toolbars were condensed to a drop-down menu if the Office window was less than 870px wide. This may be a frustration to users with low-resolution displays, and you might want to use the Office Apps maximized. Get Rid of the Ribbon Now that you’ve got the old menus back, you can get rid of the extra ribbon tabs if you’d like. Office 2010 lets you customize your ribbon and remove tabs, so let’s get rid of all the other tabs except for our new Menu tab. In our example we’re using Word, but you can do it in Excel or PowerPoint the same way. Click the File tab and select Options. Alternately, in the Menu tab, select Tools and then Word Options. Select Customize Ribbon on the left sidebar, then uncheck the boxes beside all the ribbon tabs you want to hide on the right. Click Ok when you’re finished. While you’re at it, you can change the default color scheme as well. Note: The color change will automatically change the color scheme in all of the Office apps, so you’ll only need to do that once. Now the ribbon only has 2 tabs…the File tab for the new Backstage View, and the UBitMenu tab we just installed. It almost has the appearance Word 2003, but with the new features of Word 2010! You’ll need to repeat these steps in Excel and PowerPoint if you want to customize their ribbon the same. Conclusion If you’ve been having a hard time getting used to Office 2010, UBitMenu is a great way to get familiar with the new interface, or simply stay productive with your old tricks. We do wish it supported the other Office applications like OneNote and Outlook. That doesn’t make it a deal breaker though, it can make the learning curve easier in Word, PowerPoint, and Excel. UBitMenu is free for personal use, and available at a very reasonable price for businesses. If you’re using Office 2007 and not a fan of the Ribbon, UBitMenu works for it as well. Download UBitMenu Similar Articles Productive Geek Tips How To Bring Back the Old Menus in Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideHow to Find Office 2003 Commands in Office 2010Make Word 2007 Always Save in Word 2003 FormatMake Excel 2007 Always Save in Excel 2003 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets

Read the article

Microsoft TechEd 2010 - Day 2 @ Bangalore

- by sathya

Microsoft TechEd 2010 - Day 2 @ Bangalore Today is the day 2 @ Microsoft TechEd 2010. We had lot of technical sessions as usual there were many tracks going on side by side and I was attending the Web simplified track, Which comprised of the following sessions : Developing a scalable Media Application using ASP.NET MVC - This was a kind of little advanced stuff. Anyways I couldn't understand much because this was not my piece of cake and I havent worked on this before ASP.Net MVC Unplugged - This was really great because this session covered from the basics of MVC showing what is Model,View and Controller and how it worked and the speaker went into the details of the same. Building RESTful Applications with the Open Data Protocol - There were some concepts explained about this from the basics on how to build RESTful Services and it went on till some advanced configurations of the same. Developing Scalable Web Applications with AppFabric Caching - This session showed about the integration of AppFabric with the .Net Web Applications. Instead of using Inproc Sessions, we can use this AppFabric as a substitute for Caching and outofProc Session Storage without writing code and doing a little bit of configurations which brings in High Scalability, performance to our applications. (But unfortunately there were no demos for this session ) Deep Dive : WCF RIA Services - This session was also an interactive one, in this the speaker presented from the basics of WCF and took a Book Store Application as a sample and explained all details concepts on linking with RIA Services Apart from these sessions, in between there happened some small events in the breaks like Some discussions about Technology, Innovations Music Jokes Mimicry, etc. And on doing all these things, the developers were given some kool gifts / goodies like USBs, T-Shirts, etc. And today I got a chance to do the following certification : (70-562) Microsoft Certified Technology Specialist in .NET 3.5 Web Applications Since I already have an MCTS in .NET 2.0, I wanted to do an MCPD and for doing the same I was required to do an update to my MCTS with the .NET 3.5 framework and I did the same I cleared it and now am an MCTS in .NET 3.5 Web Apps And on doing this I got a T-Shirt and they gave something called Learning $ of worth 30$. And in various stalls for attending each quiz or some game or some referrals we got some Learning $ which we can redeem later based on our Total Learning $. I got 105 $ which i was able to redeem and got a Microsoft Learning BagPack, 1 free Microsoft certification offer, a laptop light and an e-learning content activated. And after all these sessions and small events, we had something called Demo Extravaganza like I mentioned yesterday. This was a great funfilled event with lot of goodies for the attendees. There were some lucky draw which enabled 2 attendees to get Netbooks (Sponsored by Intel) and 1 attendee to get X-box (Sponsored by Citrix). After Choosing the raffle in the lucky draw they kept it on a device called Microsoft Surface which is a kind of big touch screen device and on putting the raffle on that it detected the code of the attendee and said intelligently how many sessions that person has attended and if he has attended more than 5 he got a Netbook and this was coded by a guy called Imran. Apart from they showed demos on : Research by 2 Tamilnadu students from Krishna Arts and Science college, taken 1200 photographs of their college from different angles and put that up in Bing maps using silverlight and linked with Photosynth, which showed a 3d view of their college based on the photos they uploaded Reasearch by Microsoft on Panaramic HD views of the images. One young guy from Microsoft Research showed a demo of this on Srivilliputhur Andal Temple, in Tamil Nadu and its history with a panoramic view of the temple and the near by places with narration of the historical information on the same and with the videos embedded in it with high definition images which we can zoom to a very detailed level. Some Demo on a business app with Silverlight, Business Intelligence (BI) and maps integrated. It showed the sales of a particular product across locations. Some kool demos by 2 geeks who used Robots to show their development talents. 2 Robots fought with each other 2 Robots danced in sync for the A.R. Rehman song Humma Humma... A dream home project by Raman. He is currently using the same in his home too. Robots are controlling his home currently. They showed a video on this. Here are the list of activities that Robot does for him When he reads a book, robot automatically scans that and shows that image of that person in the screen (TV or comp) in front of him. It shows a wikipedia about that person. It says that person is not in linked in. do you want to add him If he sees an IPL Match news in the book and smiles it understands he is interested in that and opens a website related to that and shows the current game and the scorecard. It cooks for him It cleans the room for him whenever he leaves the house when he is doing something if some intruder comes inside his house his computer automatically switches his screen showing the video of the person coming inside. When he wakes up it automatically opens up the system, loads his mails and the news by the side, etc. Some Demos on Microsoft Pivot. This was there in livelabs but it is now available in getpivot.com its a pivoting of the pictorial data based on some categories and filters on the searches that we do. And finally on filling up some feedback forms we got T-Shirts and Microsoft Visual Studio 2010 Training Kit CDs. Whats more on TechEd??? Stay tuned!!! Will update you soon on the other happenings!! PS : I typed a lot of content for more than a hour but I pressed a backspace and it went to the previous page and all my content were lost and I was not able to retrieve the same and I typed everything again.

Read the article

Enable DreamScene in Any Version of Vista or Windows 7

- by DigitalGeekery

Windows DreamScene was a utility available for Vista Ultimate that allowed users to set video as desktop wallpaper. It was dropped in Windows 7, but we’ll take a look at how to play DreamScenes in all versions of Windows 7 or Vista. Downloading DreamScenes First, you’ll need to find some DreamScenes to download. We’ve found some nice ones at both DreamScene.org and DeviantArt. You can find those download links at the end of the article. They’ll come as compressed files, so you’ll need to extract them after downloading. Windows 7 DreamScene Activator If you are running Windows 7 you can use Windows 7 DreamScene Activator. This free portable utility enables DreamScene in both 32 & 64 bit versions of Windows 7. Users can then set either MPG or WMV files as desktop wallpaper. Download and extract the Windows 7 DreamScene Activator (link below). Once extracted, you’ll need to run the application as administrator. Right-click on the .exe and select Run as administrator. Click on Enable DreamScene. This will also restart Windows Explorer if it is open. To play your DreamScene, browse for the file in Windows Explorer, right-click the file and select Set as Desktop Background. Enjoy your new Windows 7 DreamScene. Although it says it is for Windows 7 only, we were able to get it to work with no problems on Vista Home Premium x32 as well. You can Pause the DreamScene at anytime by right-clicking on the desktop and selecting Pause DreamScene. When you are ready for a change, click Disable DreamScene and switch back to your previous wallpaper. Using VLC Media Player Users of all versions of Windows 7 & Vista can enable a DreamScene using VLC. Recently, we showed you how to set a video as your desktop wallpaper in VLC. Since DreamScenes are in MPEG or WMV format, we will use the same tactic to display them as desktop wallpaper. We’ll just need to make a few additional tweaks to the VLC settings. You’ll need to download and install VLC media player if you don’t already have it. You can find the download link below. Next, select Tools > Preferences from the Menu. Select the Video button on the left and then choose DirectX video output from the Output dropdown list. Next, select All under Show Settings at the lower left, then select the Video button on the left pane. Uncheck Show media title on video. This will prevent VLC from constantly showing the title of the video on the screen each time the video loops. Click Save and the restart VLC. Now we will add the video to our playlist and set it to continuously loop. Select View > Playlist from the Menu. Select the Add file button from the bottom of the Playlist window and select Add file. Browse for your file and click Open. Click the Loop button at the bottom so the video plays in a continuous loop. Now, we’re ready to play the video. After the video starts playing, select Video > DirectX Wallpaper from the Menu, then minimize VLC. If you’re using Aero Themes, you may get a pop-up warning and Windows will switch automatically to a basic theme. If looping one video gets to be a little repetitive, you can add multiple videos to your playlist in VLC and loop the entire playlist. Just make sure you toggle the Loop button on the playlist window to Loop All. Now you’ve got a nice DreamScene playing on your desktop. Another cool trick you can do with VLC is take snapshots of favorite movie scenes and set them as backgrounds. When you’re ready to go back to your old wallpaper, maximize VLC, select Video and click DirectX Wallpaper again to turn it off the video background. Occasionally we were left with a black screen and had to manually change our wallpaper back to normal even after turning off the DirectX Wallpaper. Note: Keep in mind that using the VLC method takes up a lot of resources so if you try to run it on older hardware, or say a netbook, you’re not going to get good results. We also tried to use the VLC method in XP, but couldn’t get it to work. If you have leave a comment and let us know. While the DreamScene feature never really caught on in Vista, we find them to be a cool way to pump a little life into your desktop on any version of Vista or Windows 7. Downloads DreamScenes from Dreamscene.org DreamScenes from DeviantArt Download VLC media player Windows 7 DreamScene Activator Similar Articles Productive Geek Tips Wait, How do I Turn on DreamScene Again?Enable Run Command on Windows 7 or Vista Start MenuEnable or Disable UAC From the Windows 7 / Vista Command LineUnderstanding Windows Vista Aero Glass RequirementsEnable Mapping to \HostnameC$ Share on Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace

Read the article

How to Customize Fonts and Colors for Gnome Panels in Ubuntu Linux

- by The Geek

Earlier this week we showed you how to make the Gnome Panels totally transparent, but you really need some customized fonts and colors to make the effect work better. Here’s how to do it. This article is the first part of a multi-part series on how to customize the Ubuntu desktop, written by How-To Geek reader and ubergeek, Omar Hafiz. Changing the Gnome Colors the Easy Way You’ll first need to install Gnome Color Chooser which is available in the default repositories (the package name is gnome-color-chooser). Then go to System > Preferences > Gnome Color Chooser to launch the program. When you see all these tabs you immediately know that Gnome Color Chooser does not only change the font color of the panel, but also the color of the fonts all over Ubuntu, desktop icons, and many other things as well. Now switch to the panel tab, here you can control every thing about your panels. You can change font, font color, background and background color of the panels and start menus. Tick the “Normal” option and choose the color you want for the panel font. If you want you can change the hover color of the buttons on the panel by too. A little below the color option is the font options, this includes the font, font size, and the X and Y positioning of the font. The first two options are pretty straight forward, they change the typeface and the size. The X-Padding and Y-Padding may confuse you but they are interesting, they may give a nice look for your panels by increasing the space between items on your panel like this: X-Padding: Y-Padding: The bottom half of the window controls the look of your start menus which is the Applications, Places, and Systems menus. You can customize them just the way you did with the panel. Alright, this was the easy way to change the font of your panels. Changing the Gnome Theme Colors the Command-Line Way The other hard (not so hard really) way will be changing the configuration files that tell your panel how it should look like. In your Home Folder, press Ctrl+H to show the hidden files, now find the file “.gtkrc-2.0”, open it and insert this line in it. If there are any other lines in the file leave them intact. include “/home/<username>/.gnome2/panel-fontrc” Don’t forget to replace the <user_name> with you user account name. When done close and save the file. Now navigate the folder “.gnome2” from your Home Folder and create a new file and name it “panel-fontrc”. Open the file you just created with a text editor and paste the following in it: style “my_color”{fg[NORMAL] = “#FF0000”}widget “*PanelWidget*” style “my_color”widget “*PanelApplet*” style “my_color” This text will make the font red. If you want other colors you’ll need to replace the Hex value/HTML Notation (in this case #FF0000) with the value of the color you want. To get the hex value you can use GIMP, Gcolor2 witch is available in the default repositories or you can right-click on your panel > Properties > Background tab then click to choose the color you want and copy the Hex value. Don’t change any other thing in the text. When done, save and close. Now press Alt+F2 and enter “killall gnome-panel” to force it to restart or you can log out and login again. Most of you will prefer the first way of changing the font and color for it’s ease of applying and because it gives you much more options but, some may not have the ability/will to download and install a new program on their machine or have reasons of their own for not to using it, that’s why we provided the two way. Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware The Splendiferous Array of Culinary Tools [Infographic] Add a Real-Time Earth Wallpaper App to Ubuntu with xplanetFX The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker

Read the article

Defining Your Online Segmentation and Targeting Strategy

- by Christie Flanagan

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A lot of times, companies will put online segmentation and targeting on the back burner because they don’t know where to start. Often, I’ve heard web managers say that their segments aren’t well understood yet, so they can’t really deliver personalized online experiences that are meaningful. This lack of complete understanding means that they don't really bother to try. But, I don’t think you necessarily need to have an elaborate segmentation and targeting strategy already in place to start delivering a more relevant online customer experience. Sometimes it helps to think of how segmentation and targeting might solve some of the challenges your sites visitors are currently experiencing on your web presence, rather than doing nothing and waiting until a fully baked segmentation strategy lands in your inbox. For example, perhaps you have a broad and varied service offering that makes it difficult for site visitors to easily find the solutions that are most relevant for them. How can segmentation and targeting help solve this problem? Or maybe it’s like the airline I described in Monday’s post where the special deals featured on the home page are only relevant to site visitors from a couple of cities. Couldn’t segmentation and targeting help them to highlight offers on their home page that are relevant to a larger share of their site visitors? Your early segmentation and targeting efforts do not need to be complicated. There are simple ways to start delivering a more relevant online customer experience, even if you’re dealing with anonymous site visitors. These include targeting content to site visitors based on: Referral: Deliver targeted content to your site visitors that is based on where they came from or the search term they used to find your site Behavior: Deliver content to your site visitors that is related or similar to content they’ve clicked on already Location: Deliver content your site visitors that is most relevant for their geographic location (this would solve that pesky airline home page problem described above) So as you can see, there really are some very simple ways in which you can start improving your online customer experience using very basic segmentation and targeting methods. One thing to keep in mind as you start to define you segmentation and targeting strategy is that there are many different types of attributes or combinations of attributes upon which you can base your segmentation and targeting strategy. In addition to referral, behavior and location, other attributes that you should consider are: Profile Information: What profile information do you know about this customer already? Perhaps they provided some information on their interests and preferences when they first registered with your site. Time: What time is it and how does that impact what my site visitors are looking for or trying to do? Demographics: What are my site visitors’ ages, incomes or ethnicities? Which attributes you select to include in your segmentation strategy will depend on your unique business needs and objectives. Attributes such as behavior or referral may not be the most important targeting criteria depending on your situation. For example, if you’re a newspaper you might know that certain visitors are sports fans based on their profile information. You can create a segment for sports fans and target sports related content to that segment of your readership online. Or perhaps, a reader is browsing stories that are related to politics; you can use that visitor’s behavior to assign him or her to a segment for those interested in politics. From there you can recommend more stories to that visitor based on their interest in politics. For an airline, the visitor’s location may be a more important attribute. By detecting the visitor’s location, you can assign them to an appropriate segment and then target special flights and offers to them based on their likely departure airport. As you can see, there are many practical ways that you can start improving the experience your customers receive on your web presence using fairly basic segmentation and targeting techniques. If you want to learn more about segmentation and targeting using Oracle’s web experience management solution, check out this helpful video that demonstrates these powerful capabilities in Oracle WebCenter Sites. ***** On Demand Webcast Featuring Brian Solis of Altimeter Group Trends such as the mobile web, social media, gamification and real-time are changing customer behavior and expectations. In this new environment, many businesses will struggle. Some will fall by the wayside, while others learn to adapt and thrive. Watch this on demand webcast with Altimeter Group digital analyst and author, Brian Solis, and discover what your organization needs to know about how to compete in the new era of Digital Darwinism. View now.

Read the article

How to update coffee script?

- by Tetsu

I got a following error when I tried to watch coffee scripts by coffee -o js -cw coffee. /usr/local/lib/node_modules/coffee-script/lib/coffee-script/command.js:321 throw e; ^ Error: watch Unknown system errno 28 at errnoException (fs.js:636:11) at FSWatcher.start (fs.js:663:11) at Object.watch (fs.js:691:11) at /usr/local/lib/node_modules/coffee-script/lib/coffee-script/command.js:287:27 at Object.oncomplete (/usr/local/lib/node_modules/coffee-script/lib/coffee-script/command.js:100:11) I have no idea what is going with error. Then I checked the versions, coffee -v is 1.6.1 and node -v is v0.6.12. According the official site( http://coffeescript.org/ ) the latest version is 1.6.3, so I wanted update coffee by npm update -g coffee-script, but this fails also. npm WARN [email protected] package.json: bugs['name'] should probably be bugs['url'] npm http GET https://registry.npmjs.org/coffee-script npm http 304 https://registry.npmjs.org/coffee-script How can I update coffee script? Edit 2013/10/11 In my coffee script directory there is only one file box_wrapper.coffee. $ -> $("body").children().wrap -> "<div id='#{$(@).attr "id"}_box' class='wrapper'/>" Edit 2013/10/16 I tried to re-install coffee, so I've done like this. $ sudo npm -g rm coffee npm WARN Not installed in /usr/local/lib/node_modules coffee $ coffee -v CoffeeScript version 1.6.1 I can't remove coffee. And I tried also like this. $ sudo apt-get remove npm $ npm -v -bash: /usr/bin/npm: No such file or directory $ sudo apt-get install npm $ npm -v 1.1.4 $ sudo npm -g install coffee # I omit a lot of `GET` parts. npm http 304 https://registry.npmjs.org/mkdirp/0.3.4 npm ERR! error installing [email protected] npm http 304 https://registry.npmjs.org/assertion-error/1.0.0 npm http 304 https://registry.npmjs.org/growl npm http 304 https://registry.npmjs.org/jade/0.26.3 npm http 304 https://registry.npmjs.org/diff/1.0.2 npm http 304 https://registry.npmjs.org/mkdirp/0.3.5 npm http 304 https://registry.npmjs.org/glob/3.2.1 npm http 304 https://registry.npmjs.org/ms/0.3.0 npm ERR! error rolling back [email protected] Error: UNKNOWN, unknown error '/usr/local/lib/node_modules/coffee/node_modules/express' npm ERR! error installing [email protected] npm ERR! EEXIST, file already exists '/usr/local/lib/node_modules/coffee/node_modules/mocha/node_modules' npm ERR! File exists: /usr/local/lib/node_modules/coffee/node_modules/mocha/node_modules npm ERR! Move it away, and try again. npm ERR! npm ERR! System Linux 3.2.0-54-generic-pae npm ERR! command "node" "/usr/bin/npm" "-g" "install" "coffee" npm ERR! cwd /home/ironsand npm ERR! node -v v0.6.12 npm ERR! npm -v 1.1.4 npm ERR! path /usr/local/lib/node_modules/coffee/node_modules/mocha/node_modules npm ERR! fstream_path /usr/local/lib/node_modules/coffee/node_modules/mocha/node_modules/___debug.npm npm ERR! fstream_type Directory npm ERR! fstream_class DirWriter npm ERR! code EEXIST npm ERR! message EEXIST, file already exists '/usr/local/lib/node_modules/coffee/node_modules/mocha/node_modules' npm ERR! errno {} npm ERR! fstream_stack /usr/lib/nodejs/fstream/lib/writer.js:161:23 npm ERR! fstream_stack Object.oncomplete (/usr/lib/nodejs/mkdirp.js:34:53) npm ERR! EEXIST, file already exists '/usr/local/lib/node_modules/coffee/node_modules/mocha/node_modules' npm ERR! File exists: /usr/local/lib/node_modules/coffee/node_modules/mocha/node_modules npm ERR! Move it away, and try again. npm ERR! npm ERR! System Linux 3.2.0-54-generic-pae npm ERR! command "node" "/usr/bin/npm" "-g" "install" "coffee" npm ERR! cwd /home/ironsand npm ERR! node -v v0.6.12 npm ERR! npm -v 1.1.4 npm ERR! path /usr/local/lib/node_modules/coffee/node_modules/mocha/node_modules npm ERR! fstream_path /usr/local/lib/node_modules/coffee/node_modules/mocha/node_modules/___debug.npm npm ERR! fstream_type Directory npm ERR! fstream_class DirWriter npm ERR! code EEXIST npm ERR! message EEXIST, file already exists '/usr/local/lib/node_modules/coffee/node_modules/mocha/node_modules' npm ERR! errno {} npm ERR! fstream_stack /usr/lib/nodejs/fstream/lib/writer.js:161:23 npm ERR! fstream_stack Object.oncomplete (/usr/lib/nodejs/mkdirp.js:34:53) npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/ironsand/npm-debug.log npm not ok And npm-debug.log is a blank file.

Read the article

How to fix Ogre3d segfault with std::_Rb_tree_insert_and_rebalance ?

- by Balázs Béla

Hello all. I'm working on a 3d music visualizer using Ogre3d, basically it's a spectrum analizer, a lot like the old xmms plugin: (http)://www.youtube.com/watch?v=_6NKBiwYN24 It works well, the bars are drawn and updated, there are no framerate issues, but it crashes randomly. Sometimes it can run without problems, finish the song, other times it crashes instantly, other times the music just stops, without a crash. Here is the source code for the main class : https://github.com/balazsbela/OgreVisualizer/blob/master/src/VisualizerApplication.cpp#L221 Also the crashes seem to happen less often when I display the framerate overlay from Ogre samples. Would limiting the framerate help ? The crashes are seemingly random. Is it a performance issue ? Please help me out, I'm quite lost on this one, I also posted on Ogre3d forums but I received no responses. (http)://www.ogre3d.org/forums/viewtopic.php?f=2&t=63207 I also tried stackoverflow: (http)://stackoverflow.com/questions/5050147/how-to-fix-ogre3d-segfault-with-std-rb-tree-insert-and-rebalance Thank you. Backtrace: balazsbela@darknet:~/workspace/OgreVisualizer/Release$ gdb OgreVisualizer core GNU gdb (GDB) 7.2-debian Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /home/balazsbela/workspace/OgreVisualizer/Release/OgreVisualizer...done. [New Thread 17705] [New Thread 17702] [New Thread 17703] [New Thread 17700] Reading symbols from /usr/lib/libv4l/v4l1compat.so...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libv4l/v4l1compat.so Reading symbols from /usr/local/lib/libOgreMain.so.1.7.1...done. Loaded symbols for /usr/local/lib/libOgreMain.so.1.7.1 Reading symbols from /usr/lib/libfftw3.so.3...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libfftw3.so.3 Reading symbols from /usr/lib/libSDL_sound-1.0.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libSDL_sound-1.0.so.1 Reading symbols from /usr/lib/libSDL-1.2.so.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libSDL-1.2.so.0 Reading symbols from /usr/lib/libSDL_mixer-1.2.so.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libSDL_mixer-1.2.so.0 Reading symbols from /usr/lib/libOIS-1.2.0.so...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libOIS-1.2.0.so Reading symbols from /usr/lib/libstdc++.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libstdc++.so.6 Reading symbols from /lib/i686/cmov/libm.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libm-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libm.so.6 Reading symbols from /lib/libgcc_s.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libgcc_s.so.1 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/i686/cmov/libpthread.so.0...Reading symbols from /usr/lib/debug/lib/i686/cmov/libpthread-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libpthread.so.0 Reading symbols from /usr/local/lib/libv4l1.so.0...done. Loaded symbols for /usr/local/lib/libv4l1.so.0 Reading symbols from /usr/lib/libfreetype.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libfreetype.so.6 Reading symbols from /usr/lib/libSM.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libSM.so.6 Reading symbols from /usr/lib/libICE.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libICE.so.6 Reading symbols from /usr/lib/libX11.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libX11.so.6 Reading symbols from /usr/lib/libXext.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXext.so.6 Reading symbols from /usr/lib/libXt.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXt.so.6 Reading symbols from /usr/lib/libXaw.so.7...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXaw.so.7 Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /usr/lib/libboost_thread.so.1.42.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libboost_thread.so.1.42.0 Reading symbols from /usr/lib/libboost_date_time.so.1.42.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libboost_date_time.so.1.42.0 Reading symbols from /usr/lib/libfreeimage.so.3...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libfreeimage.so.3 Reading symbols from /usr/lib/libzzip-0.so.13...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libzzip-0.so.13 Reading symbols from /usr/lib/libz.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /usr/lib/libsmpeg-0.4.so.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libsmpeg-0.4.so.0 Reading symbols from /usr/lib/libmikmod.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libmikmod.so.2 Reading symbols from /usr/lib/libvorbis.so.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libvorbis.so.0 Reading symbols from /usr/lib/libvorbisfile.so.3...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libvorbisfile.so.3 Reading symbols from /usr/lib/libFLAC.so.8...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libFLAC.so.8 Reading symbols from /usr/lib/libogg.so.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libogg.so.0 Reading symbols from /usr/lib/sse2/libspeex.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/sse2/libspeex.so.1 Reading symbols from /usr/lib/libasound.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libasound.so.2 Reading symbols from /lib/i686/cmov/librt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/librt-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/librt.so.1 Reading symbols from /usr/lib/libdirectfb-1.2.so.9...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libdirectfb-1.2.so.9 Reading symbols from /usr/lib/libfusion-1.2.so.9...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libfusion-1.2.so.9 Reading symbols from /usr/lib/libdirect-1.2.so.9...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libdirect-1.2.so.9 Reading symbols from /usr/lib/libvga.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libvga.so.1 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.11.2.so...done. done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /usr/local/lib/libv4l2.so.0...done. Loaded symbols for /usr/local/lib/libv4l2.so.0 Reading symbols from /lib/libuuid.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libuuid.so.1 Reading symbols from /usr/lib/libxcb.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libxcb.so.1 Reading symbols from /usr/lib/libXmu.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXmu.so.6 Reading symbols from /usr/lib/libXpm.so.4...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXpm.so.4 Reading symbols from /usr/lib/libjpeg.so.62...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libjpeg.so.62 Reading symbols from /usr/lib/libmng.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libmng.so.1 Reading symbols from /usr/lib/libopenjpeg.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libopenjpeg.so.2 Reading symbols from /lib/libpng12.so.0...(no debugging symbols found)...done. Loaded symbols for /lib/libpng12.so.0 Reading symbols from /usr/lib/libIlmImf.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libIlmImf.so.6 Reading symbols from /usr/lib/libImath.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libImath.so.6 Reading symbols from /usr/lib/libHalf.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libHalf.so.6 Reading symbols from /usr/lib/libIex.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libIex.so.6 Reading symbols from /usr/lib/libIlmThread.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libIlmThread.so.6 Reading symbols from /lib/libx86.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libx86.so.1 Reading symbols from /usr/local/lib/libv4lconvert.so.0...done. Loaded symbols for /usr/local/lib/libv4lconvert.so.0 Reading symbols from /usr/lib/libXau.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXau.so.6 Reading symbols from /usr/lib/libXdmcp.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXdmcp.so.6 Reading symbols from /usr/lib/liblcms.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/liblcms.so.1 Reading symbols from /usr/local/lib/OGRE/RenderSystem_GL.so...done. Loaded symbols for /usr/local/lib/OGRE/RenderSystem_GL.so Reading symbols from /usr/lib/libGLU.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libGLU.so.1 Reading symbols from /usr/lib/libGL.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libGL.so.1 Reading symbols from /usr/lib/libXrandr.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXrandr.so.2 Reading symbols from /usr/lib/libGLcore.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libGLcore.so.1 Reading symbols from /usr/lib/tls/libnvidia-tls.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/tls/libnvidia-tls.so.1 Reading symbols from /usr/lib/libXrender.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXrender.so.1 Reading symbols from /usr/lib/libXcursor.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXcursor.so.1 Reading symbols from /usr/lib/libXfixes.so.3...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXfixes.so.3 Reading symbols from /lib/i686/cmov/libnss_compat.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_compat-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_compat.so.2 Reading symbols from /lib/i686/cmov/libnsl.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnsl-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libnsl.so.1 Reading symbols from /lib/i686/cmov/libnss_nis.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_nis-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_nis.so.2 Reading symbols from /lib/i686/cmov/libnss_files.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_files-2.11.2.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_files.so.2 Reading symbols from /usr/lib/alsa-lib/libasound_module_rate_speexrate.so...(no debugging symbols found)...done. Loaded symbols for /usr/lib/alsa-lib/libasound_module_rate_speexrate.so Reading symbols from /usr/lib/sse2/libspeexdsp.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/sse2/libspeexdsp.so.1 Core was generated by `./OgreVisualizer'. Program terminated with signal 11, Segmentation fault. #0 0xb6dc563d in std::_Rb_tree_insert_and_rebalance(bool, std::_Rb_tree_node_base*, std::_Rb_tree_node_base*, std::_Rb_tree_node_base&) () from /usr/lib/libstdc++.so.6 (gdb) bt #0 0xb6dc563d in std::_Rb_tree_insert_and_rebalance(bool, std::_Rb_tree_node_base*, std::_Rb_tree_node_base*, std::_Rb_tree_node_base&) () from /usr/lib/libstdc++.so.6 #1 0xb73bb3c2 in std::_Rb_tree<Ogre::Node*, Ogre::Node*, std::_Identity<Ogre::Node*>, std::less<Ogre::Node*>, Ogre::STLAllocator<Ogre::Node*, Ogre::CategorisedAllocPolicy<(Ogre::MemoryCategory)0> > >::_M_insert_(std::_Rb_tree_node_base const*, std::_Rb_tree_node_base const*, Ogre::Node* const&) () from /usr/local/lib/libOgreMain.so.1.7.1 #2 0xb73b5a52 in _M_insert_unique (this=0xb6157ea0, child=0xb616aff8, forceParentUpdate=false) at /usr/include/c++/4.4/bits/stl_tree.h:1182 #3 insert (this=0xb6157ea0, child=0xb616aff8, forceParentUpdate=false) at /usr/include/c++/4.4/bits/stl_set.h:411 #4 Ogre::Node::requestUpdate (this=0xb6157ea0, child=0xb616aff8, forceParentUpdate=false) at /home/balazsbela/Downloads/ogre_src_v1-7-1/OgreMain/src/OgreNode.cpp:805 #5 0xb73b6a40 in Ogre::Node::needUpdate (this=0xb616aff8, forceParentUpdate=92) at /home/balazsbela/Downloads/ogre_src_v1-7-1/OgreMain/src/OgreNode.cpp:789 #6 0xb73b5038 in Ogre::Node::setScale (this=0x1825c, scale=...) at /home/balazsbela/Downloads/ogre_src_v1-7-1/OgreMain/src/OgreNode.cpp:638 #7 0x0805d306 in VisualizerApplication::adjustNodes (this=0x9cd4808) at ../src/VisualizerApplication.cpp:236 #8 0xb6e867f0 in ?? () from /usr/lib/libSDL_mixer-1.2.so.0 #9 0xb6e8719a in ?? () from /usr/lib/libSDL_mixer-1.2.so.0 #10 0xb6ed9b0d in ?? () from /usr/lib/libSDL-1.2.so.0 #11 0xb6ee185e in ?? () from /usr/lib/libSDL-1.2.so.0 #12 0xb6f2e0bd in ?? () from /usr/lib/libSDL-1.2.so.0 #13 0xb6bc7955 in start_thread (arg=0xb198ab70) at pthread_create.c:300 #14 0xb6ca6e7e in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:130 (gdb) Ogre.log: (http)://pastie.org/1581790

Read the article

Grub 'Read Error' - Only Loads with LiveCD

- by Ryan Sharp

Problem After installing Ubuntu to complete my Windows 7/Ubuntu 12.04 dual-boot setup, Grub just wouldn't load at all unless I boot from the LiveCD. Afterwards, everything works completely normal. However, this workaround isn't a solution and I'd like to be able to boot without the aid of a disc. Fdisk -l Using the fdisk -l command, I am given the following: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 * 48959486 124067839 37554177 5 Extended /dev/sda5 48959488 124067839 37554176 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1937897471 456844288 83 Linux /dev/sdb6 1937899520 1953523711 7812096 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT Bootinfoscript I've used the BootInfoScript, and received the following output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdb6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sdb3 starts at sector 200744960. But according to the info from fdisk, sdb3 starts at sector 2048. According to the info in the boot sector, sdb3 has 823461887 sectors, but according to the info from fdisk, it has 1024204799 sectors. Operating System: Boot files: sdc1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 208,896 48,957,439 48,748,544 7 NTFS / exFAT / HPFS /dev/sda3 * 48,959,486 124,067,839 75,108,354 5 Extended /dev/sda5 48,959,488 124,067,839 75,108,352 83 Linux Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 1,024,208,894 1,953,523,711 929,314,818 5 Extended /dev/sdb5 1,024,208,896 1,937,897,471 913,688,576 83 Linux /dev/sdb6 1,937,899,520 1,953,523,711 15,624,192 82 Linux swap / Solaris /dev/sdb3 * 2,048 1,024,206,847 1,024,204,800 7 NTFS / exFAT / HPFS Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 2,048 625,141,759 625,139,712 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 A48056DF8056B80E ntfs System Reserved /dev/sda2 A8C6D6A4C6D671D4 ntfs Windows /dev/sda5 fd71c537-3715-44e1-b1fe-07537e22b3dd ext4 /dev/sdb3 6373D03D0A3747A8 ntfs Steam /dev/sdb5 6f5a6eb3-a932-45aa-893e-045b57708270 ext4 /dev/sdb6 469848c8-867a-41b7-b0e1-b813a43c64af swap /dev/sdc1 725D7B961CF34B1B ntfs backup ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda5 / ext4 (rw,noatime,nodiratime,discard,errors=remount-ro) /dev/sdb5 /home ext4 (rw) =========================== sda5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root A48056DF8056B80E chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root A8C6D6A4C6D671D4 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd / ext4 noatime,nodiratime,discard,errors=remount-ro 0 1 # /home was on /dev/sdb5 during installation UUID=6f5a6eb3-a932-45aa-893e-045b57708270 /home ext4 defaults 0 2 # swap was on /dev/sdb6 during installation UUID=469848c8-867a-41b7-b0e1-b813a43c64af none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 -------------------------------------------------------------------------------- =================== sda5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-29-generic 2 = boot/vmlinuz-3.2.0-29-generic 1 = initrd.img 2 = vmlinuz 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda3 00000000 63 6f 70 69 61 20 65 20 63 6f 6c 61 41 63 65 64 |copia e colaAced| 00000010 65 72 20 61 20 74 6f 64 6f 20 6f 20 74 65 78 74 |er a todo o text| 00000020 6f 20 66 61 6c 61 64 6f 20 75 74 69 6c 69 7a 61 |o falado utiliza| 00000030 6e 64 6f 20 61 20 63 6f 6e 76 65 72 73 c3 a3 6f |ndo a convers..o| 00000040 20 64 65 20 74 65 78 74 6f 20 70 61 72 61 20 76 | de texto para v| 00000050 6f 7a 4d 61 6e 69 70 75 6c 61 72 20 61 73 20 64 |ozManipular as d| 00000060 65 66 69 6e 69 c3 a7 c3 b5 65 73 20 71 75 65 20 |efini....es que | 00000070 63 6f 6e 74 72 6f 6c 61 6d 20 6f 20 61 63 65 73 |controlam o aces| 00000080 73 6f 20 64 65 20 57 65 62 73 69 74 65 73 20 61 |so de Websites a| 00000090 20 63 6f 6f 6b 69 65 73 2c 20 4a 61 76 61 53 63 | cookies, JavaSc| 000000a0 72 69 70 74 20 65 20 70 6c 75 67 2d 69 6e 73 4d |ript e plug-insM| 000000b0 61 6e 69 70 75 6c 61 72 20 61 73 20 64 65 66 69 |anipular as defi| 000000c0 6e 69 c3 a7 c3 b5 65 73 20 72 65 6c 61 63 69 6f |ni....es relacio| 000000d0 6e 61 64 61 73 20 63 6f 6d 20 70 72 69 76 61 63 |nadas com privac| 000000e0 69 64 61 64 65 41 63 65 64 65 72 20 61 6f 73 20 |idadeAceder aos | 000000f0 73 65 75 73 20 70 65 72 69 66 c3 a9 72 69 63 6f |seus perif..rico| 00000100 73 20 55 53 42 55 74 69 6c 69 7a 61 72 20 6f 20 |s USBUtilizar o | 00000110 73 65 75 20 6d 69 63 72 6f 66 6f 6e 65 55 74 69 |seu microfoneUti| 00000120 6c 69 7a 61 72 20 61 20 73 75 61 20 63 c3 a2 6d |lizar a sua c..m| 00000130 61 72 61 55 74 69 6c 69 7a 61 72 20 6f 20 73 65 |araUtilizar o se| 00000140 75 20 6d 69 63 72 6f 66 6f 6e 65 20 65 20 61 20 |u microfone e a | 00000150 63 c3 a2 6d 61 72 61 4e c3 a3 6f 20 66 6f 69 20 |c..maraN..o foi | 00000160 70 6f 73 73 c3 ad 76 65 6c 20 65 6e 63 6f 6e 74 |poss..vel encont| 00000170 72 61 72 20 6f 20 63 61 6d 69 6e 68 6f 20 61 62 |rar o caminho ab| 00000180 73 6f 6c 75 74 6f 20 70 61 72 61 20 6f 20 64 69 |soluto para o di| 00000190 72 65 63 74 c3 b3 72 69 6f 20 61 20 65 6d 70 61 |rect..rio a empa| 000001a0 63 6f 74 61 72 2e 4f 20 64 69 72 65 63 74 c3 b3 |cotar.O direct..| 000001b0 72 69 6f 20 64 65 20 65 6e 74 72 61 64 61 00 fe |rio de entrada..| 000001c0 ff ff 83 fe ff ff 02 00 00 00 00 10 7a 04 00 00 |............z...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in Begging / Appreciation ;) If anything else is required to solve my problem, please ask. My only hopes are that I can solve this, and that doing so won't require re-installation of Grub due to how complicated the procedures are, or that I would be needed to reinstall the OS', as I have done so about six times already since friday due to several other issues I've encountered. Thank you, and good day. System Ubuntu 12.04 64-bit / Windows 7 SP1 64-bit 64GB SSD as boot/OS drive, 1TB HDD as /Home Swap and Steam drive.

Read the article

Today at Oracle OpenWorld 2012

- by Scott McNeil

We have another full day of great Oracle OpenWorld keynotes, sessions, demos and customer presentations in the Seen and Be Heard threater. Here's a quick run down of what's happening today with Oracle Enterprise Manager 12c: Download the Oracle Enterprise Manager 12c OpenWorld schedule (PDF) Oracle Enterprise Manager Cloud Control 12c (and Private Cloud) General Session Tues 2 Oct, 2012 Time Title Location 11:45 AM - 12:45 PM General Session: Using Oracle Enterprise Manager to Manage Your Own Private Cloud Moscone South - 103* 1:15 PM - 2:15 PM General Session: Breakthrough Efficiency in Private Cloud Infrastructure Moscone West - 3014 Conference Session Tues 2 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Oracle Exadata/Oracle Enterprise Manager 12c: Journey into Oracle Database Cloud Moscone West - 3018 10:15 AM - 11:15 AM Bulletproof Your Application Upgrades with Secure Data Masking and Subsetting Moscone West - 3020 10:15 AM - 11:15 AM Oracle Enterprise Manager 12c: Architecture Deep Dive, Tips, and Techniques Moscone South - 303 11:45 AM - 12:45 PM RDBMS Forensics: Troubleshooting with Active Session History Moscone West - 3018 11:45 AM - 12:45 PM Building and Operationalizing Your Data Center Environment with Oracle Exalogic Moscone South - 309 11:45 AM - 12:45 PM Securely Building a National Electronic Health Record: Singapore Case Study Westin San Francisco - Concordia 1:15 PM - 2:15 PM Managing Heterogeneous Environments with Oracle Enterprise Manager Moscone West - 3018 1:15 PM - 2:15 PM Complete Oracle WebLogic Server Management with Oracle Enterprise Manager 12c Moscone South - 309 1:15 PM - 2:15 PM Database Lifecycle Management with Oracle Enterprise Manager 12c Moscone West - 3020 1:15 PM - 2:15 PM Best Practices, Key Features, Tips, Techniques for Oracle Enterprise Manager 12c Upgrade Moscone South - 307 1:15 PM - 2:15 PM Enterprise Cloud with CSC’s Foundation Services for Oracle and Oracle Enterprise Manager 12c Moscone South - 236 5:00 PM - 6:00 PM Deep Dive 3-D on Oracle Exadata Management: From Discovery to Deployment to Diagnostics Moscone West - 3018 5:00 PM - 6:00 PM Everything You Need to Know About Monitoring and Troubleshooting Oracle GoldenGate Moscone West - 3005 5:00 PM - 6:00 PM Oracle Enterprise Manager 12c: The Nerve Center of Oracle Cloud Moscone West - 3020 5:00 PM - 6:00 PM Advanced Management of Oracle E-Business Suite with Oracle Enterprise Manager Moscone West - 2016 5:00 PM - 6:00 PM Oracle Enterprise Manager 12c Cloud Control Performance Pages: Falling in Love Again Moscone West - 3014 Hands-on Labs Tues 2 Oct, 2012 Time Title Location 10:15 AM - 12:45 PM Managing the Cloud with Oracle Enterprise Manager 12c Marriott Marquis - Salon 5/6 1:15 PM - 2:15 PM Database Performance Tuning Hands-on Lab Marriott Marquis - Salon 5/6 Scene and Be Heard Theater Session Tues 2 Oct, 2012 Time Title Location 10:30 AM - 10:50 AM Start Small, Grow Big: Hands-On Oracle Private Cloud—A Step-by-Step Guide Moscone South Exhibition Hall - Booth 2407 12:30 PM - 12:50 PM Blue Medora’s Oracle Enterprise Manager Plug-in for VMware vSphere Monitoring Moscone South Exhibition Hall - Booth 2407 Demos Demo Location Application and Infrastructure Testing Moscone West - W-092 Automatic Application and SQL Tuning Moscone South, Left - S-042 Automatic Fault Diagnostics Moscone South, Left - S-036 Automatic Performance Diagnostics Moscone South, Left - S-033 Complete Care for Oracle Using My Oracle Support Moscone South, Left - S-031 Complete Cloud Lifecycle Management Moscone North, Upper Lobby - N-019 Complete Database Lifecycle Management Moscone South, Left - S-030 Comprehensive Infrastructure as a Service via Oracle Enterprise Manager Moscone South, Left - S-045 Data Masking and Data Subsetting Moscone South, Left - S-034 Database Testing with Oracle Real Application Testing Moscone South, Left - S-041 Identity Management Monitoring with Oracle Enterprise Manager Moscone South, Right - S-212 Mission-Critical, SPARC-Powered Infrastructure as a Service Moscone South, Center - S-157 Oracle E-Business Suite, Siebel, JD Edwards, and PeopleSoft Management Moscone West - W-084 Oracle Enterprise Manager Cloud Control 12c Overview Moscone South, Left - S-039 Oracle Enterprise Manager: Complete Data Center Management Moscone South, Left - S-040 Oracle Exadata Management Moscone South, Center - Oracle Exalogic Management Moscone South, Center - Oracle Fusion Applications Management Moscone West - W-018 Oracle Real User Experience Insight Moscone South, Right - S-226 Oracle WebLogic Server Management and Java Diagnostics Moscone South, Right - S-206 Platform as a Service Using Oracle Enterprise Manager Moscone North, Upper Lobby - N-020 SOA Management Moscone South, Right - S-225 Self-Service Application Testing on Private and Public Clouds Moscone West - W-110 Oracle OpenWorld Music Festival New this year is Oracle’s first annual Oracle OpenWorld Musical Festival, featuring some of today's breakthrough musicians from around the country and the world. It's five nights of back-to-back performances in the heart of San Francisco—free to registered attendees. See the lineup Not Heading to OpenWorld—Watch it Live! Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter Download the Oracle Enterprise Manager Cloud Control12c Mobile app

Read the article

e-interview: SunSpace to WebCenter migration

- by me

I had the pleasure to do an e-interview with Ana Neves around the SunSpace to WebCenter migration project. Below is the english version of the interview. Enjoy Peter, you joined Oracle in 2009 through the acquisition of Sun. Becoming a part of Oracle meant many changes. The internal collaboration platform was one of them, as per a post you wrote back in 2011. Sun had SunSpace. How would you describe SunSpace? SunSpace was the internal Community and Social Collaboration platform for the Sun's Global Sales and Services Organization. SunSpace served around 600 communities with a main focus around technology, products and services. SunSpace was a big success. Within 3 months of its launch SunSpace had over 20,000 users and it won the Atlassian "Not just another wiki" Award for the best use of Confluence (https://blogs.oracle.com/peterreiser/entry/goodbye_sunspace_hello_webcenter). What made SunSpace so special? 1. People centric versus Web centric The main concept of SunSpace put the person in the middle of everything. All relevant information, resources etc. where dynamically pushed to a person's myProfile ( Facebook like interface) based on the person's interest and needs. 2. Ease to use SunSpace was really easy to use. We spent a lot of time on social interaction design to optimize the user experience. Also we integrated some sophisticated technology to hide complexity from the user. As example - when a user added a document to SunSpace - we analyzed the content of the document and suggested related metadata and tags to the user based on a sophisticated algorithm which was integrated with the corporate taxonomy. Based on this metadata the document was automatically shared with the relevant communities. 3. Easy to find One of the main use cases for SunSpace was that a user could quickly find the content and information they needed for their job. The search implementation was based on: optimized search engine algorithm using social value based ranking enhancements community facilitated search optimization faceted search which recommended highly relevant content like products, communities and experts 4. Social Adoption - How to build vibrant communities You can deploy the coolest social technology but what if the users are not using it? To drive user adoption we implemented two complementary models: 4.1 Community Methodology We developed a set of best practices on how to create, run and sustain communities including: community structure and types (e.g. Community of Practice, Community of Interest etc.) & tips and tricks on how to build a "vibrant " communities, Community Health check etc. These best practices where constantly tuned and updated by the community of community drivers. 4.2. Social Value System To drive user adoption there is ONE key question you have to answer for each individual user: What's In It For Me (WIIFM) We developed a Social Value System called Community Equity which measures the social value flow between People, Content and Metadata. Based on this technology we added "Gamfication" techniques (although at that time this term did not exist ) to SunSpace to honor people for the active contribution and participation. As example: All social credentials a user earned trough active community participation where dynamically displayed on her/his myProfile. How would you describe WebCenter? Oracle WebCenter (@oraclewebcenter) is the Oracle's user engagement platform for social business. It helps people work together more efficiently through contextual collaboration tools that optimize connections between people, information, and applications and ensures users have access to the right information in the context of the business process in which they are engaged. Oracle WebCenter can help your organization deliver contextual and targeted Web experiences to users and enable employees to access information and applications through intuitive portals, composite applications, and mash-ups. How does it compare to SunSpace in terms of functionality? Before I answer this question, I would like to point out some limitation we started to see with the current SunSpace implementation. Due to the massive growth of the user population (>20,000 users), we experienced performance and scalability challenges with the current technology. Also at the time - Sun Internal Communications and SunIT planned to replace the entire Sun Intranet with SunSpace. We kicked-off a project to evaluate the enterprise level technology which eventually would replace the good old static Intranet. And then Oracle acquired Sun. We already had defined the functional requirements for the Intranet replacement with a Social Enterprise Stack and we just needed to evaluate the functional requirements against WebCenter Below are the summary of this evaluation MyProfile SunSpace WebCenter How WebCenter Works Home MyProfile: to access, click on your name at the top of any WebCenter page Your name, title, and reporting line are displayed. Sub-tabs show your activity stream (Activities); people in your network (Connections); files you have uploaded (Documents); your contact information (Organization); and any personal information you wish to share (About). Files MyFiles Allows you to upload, download and store documents or wiki pages within folders and subfolders. The WebDav interface allows you to download / upload files / folders with a simple drag and drop to / from your local machine. Tagging is supported and recommended. Network HomeMyConnections Home: displays the activity stream of individuals in your network.MyConnections: shows individuals in your network. Click on a person's name to see their contact info and link to their profile. Status Updates MyProfle > Activties Add and displays your recent activties and status updates. Watches Preferences > Subscriptions > Current Subscriptions Receive email notifications when pages / spaces you watch are modified. Drafts N/A WebCenter does not support Drafts Settings Preferences: to access, click on 'Preferences' at the top of any WebCenter page Set your general preferences, as well as your WebCenter messaging, search and mail settings. MyCommunities MySpaces: to access, click on 'Spaces' at the top of any WebCenter page Displays MySpaces (communities you are a member of); and Recent Spaces (communities you have recently visited). Community SunSpace Webcenter How Webcenter Works Home Home Displays a community introduction and activity stream. Members can add messages, links or documents via the Community Message Board. No Top Contributors widget. People Members Lists members of the community. The Mail All Members feature allows moderators and participants to send a message to all members of the community. Membership Management can be found under > Manage > Members News News Members can post and access latest community news and they can subscribe to news using an RSS reader Documents Documents Allows community members to upload, download and store documents or wiki pages within folders and subfolders. The WebDav interface allows participants to download / upload files / folders with a simple drag and drop to / from your local machine. Tagging is supported and recommended. Wiki Wiki Allows community members to create and update web pages with a WYSIWYG editor. Note: WebCenter does not support macros or portlet embedding. Forum Forum Post community forum topics. Contribute to community forum conversations. N/A Calendar Update and/or view the Community Calendar. N/A Analytics Displays detailed analytics data (views,downloads, unique users etc.) for Pages, Wiki, Documents, and Forum in a given community space. What is the adoption of WebCenter at Oracle? The entire Intranet serving around 100,000 users is running on WebCenter Content. For professional communities we use WebCenter Portal and Spaces. Currently we have around 6,000 community spaces with around 40,000 members. Does Oracle have any metrics to assess usage and impact of WebCenter? Can you give us some examples? Sure - we have a lot of metrics For the Intranet we use traditional metrics like pageviews, monthly unique visitors and unique visits. For Communities we use the WebCenter Portal/Spaces analytics service which gives as a wealth of data. The key metrics we track are: Space traffic (PageViews, Unique Users) Wiki,Documents (views, downloads etc.) Forum (users, views, posts etc.) Registered members over time Depending on the community we can filter/segment the metrics by User Properties e.g. Country, Organization, Job Role etc. What are you doing to improve usage and impact? 1. We integrating the WebCenter social services/fabric into all main business applications. As example The Fusion CRM deployment is seamless integrated with Oracle Social Network (OSN) and all conversation around an opportunity or customer engagement is done in OSN (see youtube video). 2. We drive Social Best Practice trough a program called "Social Networking & Business Collaboration (SNBC) program" You worked both with WebCenter and SunSpace. Knowing what you know today, if you had the chance to choose between the two, which one would you choose? Why? That's a tricky question In the early days of the Social Enterprise implementation (we started SunSpace in 2006), we needed an agile and easy to deploy technology to keep up with the users requirements. Sometimes we pushed two releases per day and we were in a permanent perpetual beta mode - SunSpace was perfect for that. After the social implementation matured over time - community generated content became business critical and we saw a change in the requirements from agile to stability, scalability and reliability of the infrastructure. WebCenter is the right choice for such an enterprise-level deployment. You are a WebCenter Evangelist at Oracle. What do you do as part of that role? Our role is to help position Oracle as one of the key thought leaders and solutions provider for Social Business. In addition we drive social innovation trough our Oracle Appslab team. Is that a full time role? Yes How many other Evangelists are there in Oracle? We are currently 5 people in the WebCenter evangelist team (@webcentervoices): Christian Finn (@cfinn) leads the team - Christian came from the Microsoft Sharepoint product management team and is a recognized expert in Social Business and Enterprise Collaboration. Noël Jaffré (@noeljaffre) is our Web Experience Management (WEM) guru and came to Oracle via FatWire acquisition (now WebCenter Sites). Jake Kuramoto (@theapplab) is part of the Oracle AppsLab innovation team - Jake is well known as the driving force behind http://theappslab.com a blog around social and innovation. Noel Portugal (@noelportugal) is a developer in the Oracle AppsLab innovation team - he is the inventor of OraTweet - Oracle's internal tweeting platform Peter Reiser (@peterreiser) is a Social Business guru and the inventor of SunSpace and Community Equity. What area of the business do you and the rest of the Evangelists sit in? What area of the organisation is responsible for WebCenter? We are part of the WebCenter product management organization. Is WebCenter part of the Knowledge Management strategy? Oracle WebCenter is the Oracle's user engagement platform for social business. It brings together the most complete portfolio of portal, web experience management, content, social and collaboration technologies into a single product suite and is the product foundation of the Oracle Knowledge Management strategy. I am aware Oracle also uses Beehive internally. How would you describe Beehive? Oracle Beehive provides an integrated set of communication and collaboration services built on a single scalable, secure, enterprise-class platform Beehive is internally used for enterprise wide mail, calendar and real collaboration (Web conferencing) services. Are Beehive and WebCenter connected? Historically Beehive and WebCenter Portal & Content had some overlap in functionally. (Hey - if a company has an acquisition strategy to strengthen its product offering and accelerate innovation, it's pretty normal that functional overlap exists :- )) A key objective of the WebCenter strategy is to combine all social and collaboration offerings under the WebCenter product family. That means that certain Beehive components will be integrated into the overall WebCenter product offering. Are there any other internal collaboration tools at Oracle? Which ones There here are two other main social tools which are widely used at Oracle Oracle Connect was the first social tool the Oracle AppsLab team created in 2007 - see (Jake's blog post for details). It is still extensively used. ... and as a former Sun guy I like this quote from the blog post: "Traffic to Connect peaked right after the Sun merger in 2010, when it served several hundred thousand pageviews each month; since then, traffic has subsided, but still averages tens of thousands of pageviews to several thousand users each month." Oratweet - Oracle internal microblogging platform has been used since June 2008 and it is still growing. It's entirely written in Oracle Application Express (APEX) which is a rapid web application development tool for the Oracle database. Wanna try it out? Here you can download the code. What is Oracle's strategy regarding (all these) collaboration tools? Pretty straight forward. The strategy is to seamless integrate the WebCenter social & collaboration services into all Business Applications to help customers to socialize their enterprise.

Read the article

Improve Playback Using Enhancements in Windows Media Player 12

- by DigitalGeekery

Are you looking for ways to improve the playback of your media in Windows Media Player 12? We’ll show you how to do that by using the enhancements in WMP 12. If you are in Library mode, you’ll need to click the icon at the lower right to switch to Now Playing mode. Right-click anywhere in Media Player while in Now Playing mode, select Enhancements, and select any of the available options. You can switch between the individual enhancements by clicking the right and left buttons at the top left. Crossfading and Auto Volume Leveling The Auto Volume Leveling setting is just a simple toggle on and off. If your MP3 or WMA files have volume leveling information values. You can automatically add volume leveling information values to all files you add to your library by switching to Library view, going to Tools > Options, and selecting Add volume leveling information values for new files on the Library tab. Click OK when finished. Crossfading will gradually decrease the volume of the song that is ending (fade out) and increase volume of the song that is beginning. Click Turn on Crossfading and then click and drag the slider left or right change the amount of overlap between tracks. Graphic Equalizer The graphic equalizer is toggled on and off by clicking Turn on / Turn off at the top left. You can select pre-defined equalizer settings by music genre by clicking the Default list. The radio buttons on the left allow you to move the sliders individually, in a loose group or a tight group. You can always return to the default settings by clicking Reset. Play Speed Settings Choose a pre-defined settings by clicking Slow, Normal, or Fast. Uncheck the Snap slider to common speeds the move the slider right and left to your desired speed. If nothing else, these settings provide a little fun and amusement. Quiet Mode Quiet mode will level out any sharp volume highs and lows within a single track. Simply toggle the setting on or off and select whether you prefer Medium difference or Little difference by selecting one of the radio buttons. SRS WOW effects SRS WOW effects enhance low-frequency and stereo sound performance. Click Turn on to enable the TruBass and WOW Effect sliders. You can also optimize for your speaker type. Click to switch between Regular, Large, and Headphones. Video Settings Video Settings allow you to adjust the Hue, Brightness, Saturation, and Contrast. You can also adjust the zoom settings by clicking Select video zoom settings. Dolby Digital Settings Choose between Normal, Night, and Theater settings to adjust the audio for Dolby Digital content. This setting will only effect media with Dolby Digital sound. Looking for more ways to improve your media experience in WMP 12? Check out how to update metadata and cover art and how to share media with other Windows 7 computers on your home network. Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add FilesInstall and Use the VLC Media Player on Ubuntu LinuxHow To Rip a Music CD in Windows 7 Media CenterStream Media from Windows 7 to XP with VLC Media PlayerInstalling Windows Media Player Plugin for Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor

Read the article

Spotlight on an office - Denmark

- by jessica.ebbelaar(at)oracle.com

Hi, my name is Michael. I work as an Intern at the Danish office in Ballerup. My job is a part-time position beside my bachelor study in International Business at Copenhagen Business School. I joined Oracle end of February last year, and what a thrilling ride it has been! Last year, when I was offered the position, there was no doubt that I wanted to go for it. Back then, I only had little idea about Oracle as a company and what kind of exciting assignments lay ahead of me. My main role is internal communications, i.e. editor of a monthly employee’s news letter; Newszone. It is an interesting task, since it requires that I am updated on the different activities that take place within the Oracle Denmark office. I try to bring interesting articles, which are relevant and interesting news to my colleagues and it allows me to interact with many different persons at the office and to learn from their experience, which give me great inspiration and ideas for the magazine. Besides being the editor of Newszone, I also make sure that other communication flow freely at the Oracle Denmark office. I do this through our LCD screen channels. I update the internal channel with the latest information and important messages for employees, and on the external channel I circulate marketing videos featuring Oracle products and customer reference stories. In addition to this, I have the responsibility acting as a content manager of the Local Communication Denmark site on MyOracle (UCM). These are more or less my usual work assignments. On top of these I take care of various ad hoc assignments such as updating the GCM database, renew newspaper subscriptions etc. The Oracle Denmark office Being part of the local employees club I also assist with arranging social events outside working hours – e.g. evenings at the theater or cinema or by attending many of the sportsactivities;such as our running club, cycling club, food club and book club. These activities have indeed helped me grow my personal network within Oracle. The office is packed with engaging, high-paced and motivated people who manage to take time off to spend a day attending Corporate Social Responsibility initiatives, one of them being GVD (Global Volunteer Day) with approximately 40 employees attending. This proofs some of the social responsible aspects of Oracle. I was positively surprised on how the office (named O-Zone) is designed. The office is designed into three distinct zones, namely Call zone, Project and Dialogue zone and Quiet zone, having different working environments for different job roles. The other thing which I like is that you do not have your own desk, which means you get to sit next to different people every day, getting new ideas and inspiration as well as getting to know more people in the organization you work in. To sum up: If you are considering pursuing an intern or a career after graduation in Oracle, do it! You will not regret it. It has given me many relevant practical experiences beside my study, and I am sure many great experiences will await you too. Want to know more about the current vacancies in Denmark? Check http://campus.oracle.com for all of our vacancies.

Read the article

Stir Trek 2: Iron Man Edition

Next month (7 May 2010) Ill be presenting at the second annual Stir Trek event in Columbus, Ohio. Stir Trek (so named because last year its themes mixed MIX and the opening of the Star Trek movie) is a very cool local event. Its a lot of fun to present at and to attend, because of its unique venue: a movie theater. And whats more, the cost of admission includes a private showing of a new movie (this year: Iron Man 2). The sessions cover a variety of topics (not just Microsoft), similar to CodeMash. The event recently sold out, so Im not telling you all of this so that you can go and sign up (though I believe you can get on the waitlist still). Rather, this is pretty much just an excuse for me to talk about my session as a way to organize my thoughts. Im actually speaking on the same topic as I did last year, but the key difference is that last year the subject of my session was nowhere close to being released, and this year, its RTM (as of last week). Thats right, the topic is Whats New in ASP.NET 4 how did you guess? Whats New in ASP.NET 4 So, just what *is* new in ASP.NET 4? Hasnt Microsoft been spending all of their time on Silverlight and MVC the last few years? Well, actually, no. There are some pretty cool things that are now available out of the box in ASP.NET 4. Theres a nice summary of the new features on MSDN. Here is my super-brief summary: Extensible Output Caching use providers like distributed cache or file system cache Preload Web Applications IIS 7.5 only; avoid the startup tax for your site by preloading it. Permanent (301) Redirects are finally supported by the framework in one line of code, not two. Session State Compression Can speed up session access in a web farm environment. Test it to see. Web Forms Features several of which mirror ASP.NET MVC advantages (viewstate, control ids) Set Meta Keywords and Description easily Granular and inheritable control over ViewState Support for more recent browsers and devices Routing (introduced in 3.5 SP1) some new features and zero web.config changes required Client ID control makes client manipulation of DOM elements much simpler. Row Selection in Data Controls fixed (id based, not row index based) FormView and ListView enhancements (less markup, more CSS compliant) New QueryExtender control makes filtering data from other Data Source Controls easy More CSS and Accessibility support Reduction of Tables and more control over output for other template controls Dynamic Data enhancements More control templates Support for inheritance in the Data Model New Attributes ASP.NET Chart Control (learn more) Lots of IDE enhancements Web Deploy tool My session will cover many but not all of these features. Theres only an hour (3pm-4pm), and its right before the prize giveaway and movie showing, so Ill be moving quickly and most likely answering questions off-line via email after the talk. Hope to see you there! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Screen Aspect Ratio

- by Bill Evjen

Jeffrey Dean, Pixar Aspect Ratio is very important to home video. What is aspect ratio – the ratio from the height to the width 2.35:1 The image is 2.35 times wide as it is high Pixar uses this for half of our movies This is called a widescreen image When modified to fit your television screen They cut this to fit the box of your screen When a comparison is made huge chunks of picture is missing It is harder to find what is going on when these pieces are missing The whole is greater than the pieces themselves. If you are missing pieces – you are missing the movie The soul and the mood is in the film shots. Cutting it to fit a screen, you are losing 30% of the movie Why different aspect ratios? Film before the 1950s 1.33:1 Academy Standard There were all aspects of images though. There was no standard. Thomas Edison developed projecting images onto a wall/screen He didn’t patent it as he saw no value in it. Then 1.37:1 came about to add a strip of sound This is the same size as a 35mm film Around 1952 – TV comes along NTSC Television followed the Academy Standard (4x3) Once TV came out, movie theater attendance plummets So Film brought forth color to combat this. Also early 3D Also Widescreen was brought forth. Cinema-Scope Studios at the time made movies bigger and bigger There was a Napoleon movie that was actually 4x1 … really wide. 1.85:1 Academy Flat 2.35:1 Anamorphic Scope (aka Panavision/Cinemascope) Almost all movies are made in these two aspect ratios Pixar has done half in one and half in the other Why choose one over the other? Artist choice It is part of the story the director wants to tell Can we preserve the story outside of the theaters? TVs before 1998 – they were very square Now TVs are very wide Historical options Toy Story released as it was and people cut it in a way that wasn’t liked by the studio Pan and Scan is another option Cut and then scan left or right depending on where the action is Frame Height Pixar can go back and animate more picture to account for the bottom/top bars. You end up with more sky and more ground The characters seem to get lost in the picture You lose what the director original intended Re-staging For animated movies, you can move characters around – restage the scene. It is a new completely different version of the film This is the best possible option that Pixar came up with They have stopped doing this really as the demand as pretty much dropped off Why not 1.33 today? There has been an evolution of taste and demands. VHS is a linear item The focus is about portability and not about quality Most was pan and scan and the quality was so bad – but people didn’t notice DVD was introduced in 1996 You could have more content – two versions of the film You could have the widescreen version and the 1.33 version People realized that they are seeing more of the movie with the widescreen High Def Televisions (16x9 monitors) This was introduced in 2005 Blu-ray Disc was introduced in 2006 This is all widescreen You cannot find a square TV anymore TVs are roughly 1.85:1 aspect ratio There is a change in demand Users are used to black bars and are used to widescreen Users are educated now What’s next for in-flight entertainment? High Def IFE Personal Electronic Devices 3D inflight

Read the article

TechEd North America 2012 – Day 1 #msTechEd

- by Marco Russo (SQLBI)

Yesterday I and Alberto delivered the PreCon day about BISM Tabular in Analysis Services 2012. We received very good feedback and now I am looking forward to meet people that read our blogs and our books! Ping me on Twitter at @marcorus if you want to contact me during the conference. This is my schedule for the next few days: · Monday, June 11, 2012 o 10:30am-12:30pm I will be in the Technical Learning Center area, at the Breaktrough Insights (station #8) in the Database & Business Intelligence area (dedicated to SQL Server 2012) o I will try to watch some sessions in the afternoon o 6:30pm-7:00pm I will be at the O’Reilly booth meeting book readers and doing some book signing · Tuesday, June 12, 2012 o 12:30pm-3:30pm I will be in the Technical Learning Center area, at the Breaktrough Insights (station #8) in the Database & Business Intelligence area (dedicated to SQL Server 2012) o 5:00pm-6:15pm I will attend the Alberto’s session DBI413 Many-to-Many Relationships in BISM Tabular (room S330E) o 6:15pm-9:00pm Community Night & Ask the Experts, we’ll discuss about Analysis Services, Tabular and Multidimensional! · Wednesday, June 13, 2012 o 11:15am-11:30am Don’t miss this special demo session at the Private Cloud, Public Cloud and Data Platform Theater in the Technical Learning Center area (next to the SQL Server 2012 zone). I and Alberto will present Querying multi-billion rows with many to many relationships in SSAS Tabular (xVelocity) and you’re invited to guess the response time of DAX queries on a 4 billion rows table with many-to-many relationships before we run them! We’ll give away some 8GB USB key if you guess the right answer! o 12:30pm-1:00pm I and Alberto will have a book signing session at the TechEd Bookstore o 3:00pm-5:00pm I will be in the Technical Learning Center area, at the Breaktrough Insights (station #8) in the Database & Business Intelligence area (dedicated to SQL Server 2012) · Thursday, June 14, 2012 o 2:45pm-4:00pm I will deliver my DBI319 BISM: Multidimensional vs. Tabular breakthrough session in room S320A. I expect many questions here! And if you want to learn more about Analysis Services Tabular, we announced two more online sessions of our SSAS Tabular Workshop: · July 2-3, 2012 - SSAS Workshop Online - America's time zone · September 3-4, 2012 - SSAS Workshop Online - America's time zone Register now if you are interested, the early bird for the July session expires on June 19, 2012! I will also deliver a SSAS Workshop in Oslo (Norway) on August 27-28, 2012.

Read the article

CodePlex Daily Summary for Wednesday, November 06, 2013

CodePlex Daily Summary for Wednesday, November 06, 2013Popular ReleasesWin_8 (??? Devel Studio 2 ??? 3): Win8 0.8 + Sample (.dvs): ???????------------------------------------------ 1. ????????? ??????????? ????????? ??????. 2. ?????????? ???? , ????????? ? ?????????? ???? ????. 3. ?????????? ?????? ??????. 4. ?????????? ????????? ???????????. 5. ????????????? ??? . English----------------------------------------------------------------------- 1. Added ability to load icons. 2. Fixed bugs related to obtaining names of shapes. 3. Fixed a memory leak. 4. Fixed some defects. 5. Optimized code. ---------------------------...NWTCompiler: NWTCompiler v2.4.0: This version fixes a bug with Pinyin and adds support for the 2013 English NWT.ConEmu - Windows console with tabs: ConEmu 131105 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe"CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.9.0: Implemented Recent Scripts list Added checking for plugin updates from AboutBox Multiple formatting improvements/fixes Implemented selection of the CLR version when preparing distribution package Added project panel button for showing plugin shortcuts list Added 'What's New?' panel Fixed auto-formatting scrolling artifact Implemented navigation to "logical" file (vs. auto-generated) file from output panel To avoid the DLLs getting locked by OS use MSI file for the installation.Home Access Plus+: v9.7: Updated: JSON.net Fixed: Issue with the Windows 8 App Added: Windows 8.1 App Added: Win: Self Signed HAP+ Install Support Added: Win: Delete File Support Added: Timeout for the Logon Tracker Removed: Error Dialogs on the User Card Fixed: Green line showing over the booking form Note: a web.config file update is requiredWPF Extended DataGrid: WPF Extended DataGrid 2.0.0.10 binaries: Now row summaries are updated whenever autofilter value sis modified.Community Forums NNTP bridge: Community Forums NNTP Bridge V55 (LiveConnect): This is a which can be used with the new LiveConnect authentication and the MSDN forums. It fixed a bug where the authentication does not work after 1 hour. A logfile will be stored in "%AppData%\Community\CommunityForumsNNTPServer". If you have any problems please feel free to sent me the file "LogFile.txt" or attached it to a issue.xUnit.net - Unit testing framework for C# and .NET (a successor to NUnit): xUnit.net Visual Studio Runner: A placeholder for downloading Visual Studio runner VSIX files, in case the Gallery is down (or you want to downgrade to older versions).Social Network Importer for NodeXL: SocialNetImporter(v.1.9.1): This new version includes: - Include me option is back - Fixed the login bug reported latelyVeraCrypt: VeraCrypt version 1.0c: Changes between 1.0b and 1.0c (11 November 2013) : Set correctly the minimum required version in volumes header (this value must always follow the program version after any major changes). This also solves also the hidden volume issueCaptcha MVC: Captcha MVC 2.5: v 2.5: Added support for MVC 5. The DefaultCaptchaManager is no longer throws an error if the captcha values was entered incorrectly. Minor changes. v 2.4.1: Fixed issues with deleting incorrect values of the captcha token in the SessionStorageProvider. This could lead to a situation when the captcha was not working with the SessionStorageProvider. Minor changes. v 2.4: Changed the IIntelligencePolicy interface, added ICaptchaManager as parameter for all methods. Improved font size ...Role Based Views in Microsoft Dynamics CRM 2011: Role Based Views in CRM 2011 - 1.0.0.0: Set the default view for a user for a particular entity based on security role Hide/ Show views for a user for a particular entity based on his security role Choose the preferred role for a user for view configuration when the user have more than one security role in the system. Ability to exclude/ include a user from view configuration as per business requirementsDuplica: duplica 0.2.498: this is first stable releaseDNN Blog: 06.00.01: 06.00.01 ReleaseThis is the first bugfix release of the new v6 blog module. These are the changes: Added some robustness in v5-v6 scripts to cater for some rare upgrade scenarios Changed the name of the module definition to avoid clash with Evoq Social Addition of sitemap providerStock Track: Version 1.2 Stable: Overhaul and re-think of the user interface in normal mode. Added stock history view in normal mode. Allows user to enter orders in normal mode. Allow advanced user to run database queries within the program. Improved sales statistics feature, able to calculate against a single category. Updated database script file. Now compatible with lower version of SQL Server.VG-Ripper & PG-Ripper: VG-Ripper 2.9.50: changes NEW: Added Support for "ImageHostHQ.com" links NEW: Added Support for "ImgMoney.net" links NEW: Added Support for "ImgSavy.com" links NEW: Added Support for "PixTreat.com" links Bug fixesVidCoder: 1.5.11 Beta: Added Encode Details window. Exposes elapsed time, ETA, current and average FPS, running file size, current pass and pass progress. Open it by going to Windows -> Encode Details while an encode is running. Subtitle dialog now disables the "Burn In" checkbox when it's either unavailable or it's the only option. It also disables the "Forced Only" when the subtitle type doesn't support the "Forced" flag. Updated HandBrake core to SVN 5872. Fixed crash in the preview window when a source fil...Wsus Package Publisher: Release v1.3.1311.02: Add three new Actions in Custom Updates : Work with Files (Copy, Delete, Rename), Work with Folders (Add, Delete, Rename) and Work with Registry Keys (Add, Delete, Rename). Fix a bug, where after resigning an update, the display is not refresh. Modify the way WPP sort rows in 'Updates Detail Viewer' and 'Computer List Viewer' so that dates are correctly sorted. Add a Tab in the settings form to set Proxy settings when WPP needs to go on Internet. Fix a bug where 'Manage Catalogs Subsc...uComponents: uComponents v6.0.0: This release of uComponents will compile against and support the new API in Umbraco v6.1.0. What's new in uComponents v6.0.0? New DataTypesImage Point XML DropDownList XPath Templatable List New features / Resolved issuesThe following workitems have been implemented and/or resolved: 14781 14805 14808 14818 14854 14827 14868 14859 14790 14853 14790 DataType Grid 14788 14810 14873 14833 14864 14855 / 14860 14816 14823 Drag & Drop support for rows Su...SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.1: New FeaturesAdded option Limit to current basket subtotal to HadSpentAmount discount rule Items in product lists can be labelled as NEW for a configurable period of time Product templates can optionally display a discount sign when discounts were applied Added the ability to set multiple favicons depending on stores and/or themes Plugin management: multiple plugins can now be (un)installed in one go Added a field for the HTML body id to store entity (Developer) New property 'Extra...New Projects.Net PG: Just university projectA2D: 1. Cache System 2. Event System 3. IoC 4. Sql Dispatcher System 5. Session System 6. ???Command Bus 7. ????Advantage Browser: A web browser made in Visual Basic 2010 for all to add and learn from or just use.BarCoder: BarCoder is C# Web app for creating EAN-8 and EAN-16 bar codec in vector graphic image format.CLIDE .NET: CLIDE .NET The Command Line IDE for .NET Because Code is just CodeDevcken Java Library: Devcken's Java LibraryDouble Sides Flipping Control - Windows Phone: Double Sides Flipping Control The Control features the following: Two Sides Control which flipping across its center in Both Directions based on horizontal geFigTree FHMS (Funeral Home Management System): FigTree FHMS (Funeral Home Management System) application is outfitted for daily operations of your funeral home.InChatter: InChatter is a Instant messaging communication module for a desktop application programmed by C#. And the server is a WCF program.Mod.Training: Some helpful examples about Orchardy stuffPlupload MVC4 Demo: This project shows how to implement Plupload with an MVC applicationQuality Control Management System: QCMS is a web-based Test Management systemQuan Ly Nha Thuoc: Project Qu?n Lý Ti?m Thu?c Tây Email: phuoc.nh2953@sinhvien.hoasen.edu.vnRandomchaos DX11 Engine: An open source C++ DX 11 EngineService Gateway: The service gateway enables composition and agility for web sites and services.Sortable objects: Sortable objects server and client sideSTSADM ExportCrawlLog - SP Foundation 2010: STSADM extension to see/export SharePoint Fiundation 2010 MSSearch configuration and Crawl LogsTACACS Plus Extended: tacacs+ updates to support subnet specific configurations and reduced configuration with ldap access.TKinect: Framework for Testing Kinect ApplicationsWebApi Data Wrapper: This project - a collection of wrapper for WebAPI.WPF ExpressionEditor: Control representing expression editor. Allows usage of custom expression parsers.

Read the article

??Database Replay Capture????

- by Liu Maclean(???)

Database Replay?11g??????,??workload capture??????????????,???????? ??Workload Capture???????: ???????????????,???????2????,??????,???????????OLTP???????capture 10????1G???? ?????: ????????????????????? ??startup restrict????,?????????? ??capture???restrict?? ????????????? ???????????????: ??scn???????? ???????? ???????? Capture???????????workload????? ???????SYSDBA?SYSOPER????OS?? ????: ?TPCC???capture??????4.5% ????session????64KB??? ???Workload Capture?????????? ????????2?, ??RAC????workload capture file??????????????,??start_capture????? ????session????64KB???,??????????????workload capture file????Server Process??????,?????????parse???execution????,Server Process??LOGON?LOGOFF?SQL??????????PGA?,???WCR Capture PG?WCR Capture PGA?,?PGA?????????????????,Server Process???????????WCR???,?????WCR???Server Process??’WCR: capture file IO write’????? ?WCR?????????: SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> select name from v$event_name where name like '%WCR%'; NAME ---------------------------------------------------------------- WCR: replay client notify WCR: replay clock WCR: replay lock order WCR: replay paused WCR: RAC message context busy WCR: capture file IO write WCR: Sync context busy latch: WCR: sync latch: WCR: processes HT 11g????????WCR???LATCH 1* select name,gets from v$latch where name like '%WCR%' SQL> / NAME GETS ------------------------------ ---------- WCR: kecu cas mem 3 WCR: kecr File Count 37 WCR: MMON Create dir 1 WCR: ticker cache 0 WCR: sync 495 WCR: processes HT 0 WCR: MTS VC queue 0 7 rows selected. ????????????Database Replay Capture????? 1. ????capture dbms_workload_capture.start_capture CREATE OR REPLACE DIRECTORY dbcapture AS '/home/oracle/dbcapture'; execute dbms_workload_capture.start_capture('CAPTURE','DBCAPTURE',default_action=>'INCLUDE'); SQL> select id,name,status,start_time,end_time,connects,user_calls,dir_path from dba_workload_captures where id = (select max(id) from dba_workload_captures) ; ID ---------- NAME -------------------------------------------------------------------------------- STATUS START_TIM END_TIME CONNECTS ---------------------------------------- --------- --------- ---------- USER_CALLS ---------- DIR_PATH -------------------------------------------------------------------------------- 1 CAPTURE IN PROGRESS 08-DEC-12 11 ID ---------- NAME -------------------------------------------------------------------------------- STATUS START_TIM END_TIME CONNECTS ---------------------------------------- --------- --------- ---------- USER_CALLS ---------- DIR_PATH -------------------------------------------------------------------------------- 167 /home/oracle/dbcapture 2. ?? capture file?? [oracle@mlab2 dbcapture]$ ls -lR .: total 8 drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 cap drwxr-xr-x 3 oracle oinstall 4096 Dec 8 07:24 capfiles -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:24 wcr_cap_00001.start ./cap: total 4 -rw-r--r-- 1 oracle oinstall 91 Dec 8 07:24 wcr_scapture.wmd ./capfiles: total 4 drwxr-xr-x 12 oracle oinstall 4096 Dec 8 07:24 inst1 ./capfiles/inst1: total 40 drwxr-xr-x 2 oracle oinstall 4096 Dec 8 08:31 aa drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ab drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ac drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ad drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ae drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 af drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ag drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ah drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ai drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 aj ./capfiles/inst1/aa: total 316 -rw-r--r-- 1 oracle oinstall 1762 Dec 8 07:25 wcr_c6cdah0000001.rec -rw-r--r-- 1 oracle oinstall 16478 Dec 8 07:28 wcr_c6cf1h0000002.rec -rw-r--r-- 1 oracle oinstall 1772 Dec 8 07:29 wcr_c6cjdh0000004.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:29 wcr_c6cnah0000005.rec -rw-r--r-- 1 oracle oinstall 1821 Dec 8 07:41 wcr_c6cpfh0000007.rec -rw-r--r-- 1 oracle oinstall 1815 Dec 8 07:33 wcr_c6cq6h000000a.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:34 wcr_c6cxmh000000h.rec -rw-r--r-- 1 oracle oinstall 1427 Dec 8 07:41 wcr_c6cxvh000000j.rec -rw-r--r-- 1 oracle oinstall 1425 Dec 8 07:41 wcr_c6czph000000k.rec -rw-r--r-- 1 oracle oinstall 2398 Dec 8 07:49 wcr_c6dqfh000000q.rec -rw-r--r-- 1 oracle oinstall 259321 Dec 8 08:35 wcr_c6du7h000000r.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:55 wcr_c6f6yh000000t.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:28 wcr_c6h3qh0000013.rec ./capfiles/inst1/ab: total 0 ./capfiles/inst1/ac: total 0 ./capfiles/inst1/ad: total 0 ./capfiles/inst1/ae: total 0 ./capfiles/inst1/af: total 0 ./capfiles/inst1/ag: total 0 ./capfiles/inst1/ah: total 0 ./capfiles/inst1/ai: total 0 ./capfiles/inst1/aj: total 0 [oracle@mlab2 dbcapture]$ cd ./capfiles/inst1/aa [oracle@mlab2 aa]$ ls -l total 316 -rw-r--r-- 1 oracle oinstall 1762 Dec 8 07:25 wcr_c6cdah0000001.rec -rw-r--r-- 1 oracle oinstall 16478 Dec 8 07:28 wcr_c6cf1h0000002.rec -rw-r--r-- 1 oracle oinstall 1772 Dec 8 07:29 wcr_c6cjdh0000004.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:29 wcr_c6cnah0000005.rec -rw-r--r-- 1 oracle oinstall 1821 Dec 8 07:41 wcr_c6cpfh0000007.rec -rw-r--r-- 1 oracle oinstall 1815 Dec 8 07:33 wcr_c6cq6h000000a.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:34 wcr_c6cxmh000000h.rec -rw-r--r-- 1 oracle oinstall 1427 Dec 8 07:41 wcr_c6cxvh000000j.rec -rw-r--r-- 1 oracle oinstall 1425 Dec 8 07:41 wcr_c6czph000000k.rec -rw-r--r-- 1 oracle oinstall 2398 Dec 8 07:49 wcr_c6dqfh000000q.rec -rw-r--r-- 1 oracle oinstall 259321 Dec 8 08:35 wcr_c6du7h000000r.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:55 wcr_c6f6yh000000t.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:28 wcr_c6h3qh0000013.rec [oracle@mlab2 aa]$ ls -l |wc -l 14 ???????14??? 3. ??LOGON????Server Process [oracle@mlab2 ~]$ sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Sat Dec 8 08:37:40 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options ?????wcr?? [oracle@mlab2 aa]$ ls -ltr total 316 -rw-r--r-- 1 oracle oinstall 1762 Dec 8 07:25 wcr_c6cdah0000001.rec -rw-r--r-- 1 oracle oinstall 16478 Dec 8 07:28 wcr_c6cf1h0000002.rec -rw-r--r-- 1 oracle oinstall 1772 Dec 8 07:29 wcr_c6cjdh0000004.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:29 wcr_c6cnah0000005.rec -rw-r--r-- 1 oracle oinstall 1815 Dec 8 07:33 wcr_c6cq6h000000a.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:34 wcr_c6cxmh000000h.rec -rw-r--r-- 1 oracle oinstall 1425 Dec 8 07:41 wcr_c6czph000000k.rec -rw-r--r-- 1 oracle oinstall 1427 Dec 8 07:41 wcr_c6cxvh000000j.rec -rw-r--r-- 1 oracle oinstall 1821 Dec 8 07:41 wcr_c6cpfh0000007.rec -rw-r--r-- 1 oracle oinstall 2398 Dec 8 07:49 wcr_c6dqfh000000q.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:55 wcr_c6f6yh000000t.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:28 wcr_c6h3qh0000013.rec -rw-r--r-- 1 oracle oinstall 259321 Dec 8 08:35 wcr_c6du7h000000r.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:37 wcr_c6hp4h0000018.rec ??????wcr_c6hp4h0000018.rec ??? SQL> select spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)); SPID ------------------------ 14293 ????????????????14293, ???????????????,??????wcr_c6hp4h0000018.rec [oracle@mlab2 ~]$ ls -l /proc/14293/fd total 0 lr-x------ 1 oracle oinstall 64 Dec 8 08:39 0 -> /dev/null l-wx------ 1 oracle oinstall 64 Dec 8 08:39 1 -> /dev/null lrwx------ 1 oracle oinstall 64 Dec 8 08:39 10 -> /u01/app/oracle/product/11201/db_1/rdbms/audit/CRMV_ora_14293_1.aud l-wx------ 1 oracle oinstall 64 Dec 8 08:39 11 -> /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trc l-wx------ 1 oracle oinstall 64 Dec 8 08:39 12 -> pipe:[34585895] l-wx------ 1 oracle oinstall 64 Dec 8 08:39 13 -> /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trm l-wx------ 1 oracle oinstall 64 Dec 8 08:39 2 -> /dev/null lr-x------ 1 oracle oinstall 64 Dec 8 08:39 3 -> /dev/null lr-x------ 1 oracle oinstall 64 Dec 8 08:39 4 -> /dev/null lr-x------ 1 oracle oinstall 64 Dec 8 08:39 5 -> /u01/app/oracle/product/11201/db_1/rdbms/mesg/oraus.msb lr-x------ 1 oracle oinstall 64 Dec 8 08:39 6 -> /proc/14293/fd lr-x------ 1 oracle oinstall 64 Dec 8 08:39 7 -> /dev/zero lrwx------ 1 oracle oinstall 64 Dec 8 08:39 8 -> /home/oracle/dbcapture/capfiles/inst1/aa/wcr_c6hp4h0000018.rec lr-x------ 1 oracle oinstall 64 Dec 8 08:39 9 -> pipe:[34585894] ?????lsof?? [root@mlab2 ~]# lsof|grep wcr_c6hp4h0000018.rec oracle 14293 oracle 8u REG 8,1 0 17629644 /home/oracle/dbcapture/capfiles/inst1/aa/wcr_c6hp4h0000018.rec ????????,??Server Process????WCR REC??,?Server Process LOGON?????? 3.????SQL??: SQL> select 1 from dual; 1 ---------- 1 SQL> / 1 ---------- 1 [oracle@mlab2 aa]$ strings wcr_c6hp4h0000018.rec ==»????SQL????, ??????? ??????SQL???,???????????????WCR??????,LOGON???????????SQL????,????????? [oracle@mlab2 aa]$ strings wcr_c6hp4h0000018.rec 11.2.0.3.0 *File header info. (Shadow process='14293') D0576B5D710A34F4E043B201A8C0ECFE SYS; NLS_LANGUAGE? AMERICAN> NLS_TERRITORY? AMERICA> NLS_CURRENCY? NLS_ISO_CURRENCY? AMERICA> NLS_NUMERIC_CHARACTERS? NLS_CALENDAR? GREGORIAN> NLS_DATE_FORMAT? DD-MON-RR> NLS_DATE_LANGUAGE? AMERICAN> NLS_CHARACTERSET? AL32UTF8> NLS_SORT? BINARY> NLS_TIME_FORMAT? HH.MI.SSXFF AM> NLS_TIMESTAMP_FORMAT? DD-MON-RR HH.MI.SSXFF AM> NLS_TIME_TZ_FORMAT? HH.MI.SSXFF AM TZR> NLS_TIMESTAMP_TZ_FORMAT? DD-MON-RR HH.MI.SSXFF AM TZR> NLS_DUAL_CURRENCY? NLS_SPECIAL_CHARS? NLS_NCHAR_CHARACTERSET? UTF8> NLS_COMP? BINARY> NLS_LENGTH_SEMANTICS? BYTE> NLS_NCHAR_CONV_EXCP? FALSE (DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/u01/app/oracle/product/11201/db_1/bin/oracle)(ARGV0=oracleCRMV)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=mlab2.oracle.com)(USER=oracle)))) ,[email protected] (TNS V1-V3)U tselect spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)) ` _ select 1 from dual select 1 from dual ??????????????????? [oracle@mlab2 aa]$ strings wcr_c6hp4h0000018.rec 9`9_^B create table vva(t1 int) `:_i :`:_iB `;_^ ;`;_^B create table vva(t1 int) `_i >`>_iB FusC `?_^ ?`?_^B FvWC _begin for i in 1..50000 loop execute immediate 'select 1 from dual where 2='||i; end loop; end; ?SERVER PROCESS LOGOFF ??????? C`E_ B k^2C ????Server Process????parse?execution???WCR??,??????????PGA?,????????????,????????,?????WCR???????????,???????? 4. ?????? SQL> oradebug setmypid Statement processed. SQL> oradebug dump processstate 10; Statement processed. SQL> oradebug tracefile_name /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trc ?processstate ??????????????? WCR: capture file IO write,??Server process??WCR ?? 3: waited for 'SQL*Net message to client' driver id=0x62657100, #bytes=0x1, =0x0 wait_id=139 seq_num=140 snap_id=1 wait times: snap=0.000007 sec, exc=0.000007 sec, total=0.000007 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 0.934091 sec of elapsed time 4: waited for 'latch: shared pool' address=0x60106b20, number=0x133, tries=0x0 wait_id=138 seq_num=139 snap_id=1 wait times: snap=0.000066 sec, exc=0.000066 sec, total=0.000066 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 1.180690 sec of elapsed time 5: waited for 'WCR: capture file IO write' =0x0, =0x0, =0x0 wait_id=137 seq_num=138 snap_id=1 wait times: snap=0.000189 sec, exc=0.000189 sec, total=0.000189 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 3.122783 sec of elapsed time 6: waited for 'WCR: capture file IO write' =0x0, =0x0, =0x0 wait_id=136 seq_num=137 snap_id=1 wait times: snap=0.000191 sec, exc=0.000191 sec, total=0.000191 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 3.053132 sec of elapsed time 7: waited for 'WCR: capture file IO write' 5.??PGA???? SQL> oradebug dump heapdump 536870917; Statement processed. grep WCR /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trc Chunk 7fb1b606bfc0 sz= 65600 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6111e18 sz= 4224 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6112e98 sz= 4184 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6113ef0 sz= 4224 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6114f70 sz= 4104 recreate "WCR Capture PG " latch=(nil) Chunk 7fb1b6115f78 sz= 160 freeable "WCR Capture PGA" Chunk 7fb1b6116018 sz= 3248 freeable "WCR Capture PGA" Subheap ds=0x7fb1b6115f90 heap name= WCR Capture PG size= 82336 HEAP DUMP heap name="WCR Capture PG" desc=0x7fb1b6115f90 FIVE LARGEST SUB HEAPS for heap name="WCR Capture PG" desc=0x7fb1b6115f9 PGA???WCR Capture PG ?WCR Capture PGA?freeable or recreate??chunk,???????Server Process???OS Chunk 7fb1b606bfc0 sz= 65600 freeable "WCR Capture PG " ds=0x7fb1b6115f90 sz= 65600=» 64k ??????????64k??,???????????????64k WCR????????????:)! 6.???? ??WCR CAPTURE????????2? SQL> SELECT x.ksppinm NAME, y.ksppstvl VALUE, x.ksppdesc describ 2 FROM SYS.x$ksppi x, SYS.x$ksppcv y 3 WHERE x.inst_id = USERENV ('Instance') 4 AND y.inst_id = USERENV ('Instance') 5 AND x.indx = y.indx 6 AND x.ksppinm in ('_capture_buffer_size','_wcr_control'); NAME VALUE DESCRIB -------------------- -------------------- ------------------------------------------------------------ _wcr_control 0 Oracle internal test WCR parameter used ONLY for testing! _capture_buffer_size 65536 To set the size of the PGA I/O recording buffers ??_capture_buffer_size ??PGA?WCR BUFFER?SIZE,???64k _wcr_control ??WCR?????,?????? ????,??????: 1. ???WCR WORKLOAD CAPTURE???????????,??Server Process????(????)2. ???server process????WCR??3. Server Proess???LOGON?LOGOFF?SQL?????????WCR???4. Server Process????????Immediate mode,????????PGA?(WCR Capture) subheap?,??????????????(timeout?????)5. ????, Server Process????????Immediate mode,?capture????parse??execution??(?????capture???parse?????????????,parse????capture???),?????LOGON?SQL??(???????)??PGA?WCR Capture?????,???????,????????,??tpcc??????4.5%6. ????_capture_buffer_size ??PGA?WCR BUFFER?SIZE,???64k7. WCR Capture?????binrary 2????,?????,????????????????WCR capture file8. WCR: capture file IO write?????Server Process??WCR??

Read the article

Active Directory and Apple's Workgroup Manager

- by qbn

I thought I'd share my experiences here. I work for a small business with only ~20 users. I wanted the ability to use managed client preferences to assign things like the software update server. Basically the ability to manage my Macs easily and in a native way. At first I tried the magic triangle solution, but I found this to be very complicated. Not only does it require a Mac OS X Server, but it gives you two points of failure. Additionally each Mac workstation must be bound to both servers. Eventually I sucked it up and went with the schema changes documented here. I was hesitant at first, because the instructions require a lot of manual work. However it was fairly basic and only took me about an hour and a half. Below you'll find the schema changes file that was a result of my work. I followed the instructions exactly and double checked everything, after six months of having this in place things have been running great. Too good to not share. I hope I save someone a couple of hours. # ================================================================== # # This file should be imported with the following command: # ldifde -i -u -f Apple AD Schema Changes.ldf -s server:port -b username domain password -j . -c "cn=Configuration,dc=X" #configurationNamingContext # LDIFDE.EXE from AD/AM V1.0 or above must be used. # This LDIF file should be imported into AD or AD/AM. It may not work for other directories. # # ================================================================== # ================================================================== # Attributes # ================================================================== # Attribute: apple-category dn: cn=apple-category,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.10.4 ldapDisplayName: apple-category attributeSyntax: 2.5.5.12 adminDescription: Category for the computer or neighborhood oMSyntax: 64 systemOnly: FALSE # Attribute: apple-computeralias dn: cn=apple-computeralias,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.20.3 ldapDisplayName: apple-computeralias attributeSyntax: 2.5.5.12 adminDescription: XML plist referring to a computer record oMSyntax: 64 systemOnly: FALSE # Attribute: apple-computer-list-groups dn: cn=apple-computer-list-groups,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.11.4 ldapDisplayName: apple-computer-list-groups attributeSyntax: 2.5.5.12 adminDescription: groups oMSyntax: 64 systemOnly: FALSE # Attribute: apple-computers dn: cn=apple-computers,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.11.3 ldapDisplayName: apple-computers attributeSyntax: 2.5.5.12 adminDescription: computers oMSyntax: 64 systemOnly: FALSE # Attribute: apple-data-stamp dn: cn=apple-data-stamp,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.12.2 ldapDisplayName: apple-data-stamp attributeSyntax: 2.5.5.5 adminDescription: data stamp oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-dns-domain dn: cn=apple-dns-domain,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.18.1 ldapDisplayName: apple-dns-domain attributeSyntax: 2.5.5.12 adminDescription: DNS domain oMSyntax: 64 systemOnly: FALSE # Attribute: apple-dnsname dn: cn=apple-dnsname,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.4 ldapDisplayName: apple-dnsname attributeSyntax: 2.5.5.12 adminDescription: DNS name oMSyntax: 64 systemOnly: FALSE # Attribute: apple-dns-nameserver dn: cn=apple-dns-nameserver,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.18.2 ldapDisplayName: apple-dns-nameserver attributeSyntax: 2.5.5.12 adminDescription: DNS name server list oMSyntax: 64 systemOnly: FALSE # Attribute: apple-group-homeowner dn: cn=apple-group-homeowner,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.14.2 ldapDisplayName: apple-group-homeowner attributeSyntax: 2.5.5.5 adminDescription: group home owner settings oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-group-homeurl dn: cn=apple-group-homeurl,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.14.1 ldapDisplayName: apple-group-homeurl attributeSyntax: 2.5.5.5 adminDescription: group home url oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-imhandle dn: cn=apple-imhandle,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.21 ldapDisplayName: apple-imhandle attributeSyntax: 2.5.5.12 adminDescription: IM handle (service:account name) oMSyntax: 64 systemOnly: FALSE # Attribute: apple-keyword dn: cn=apple-keyword,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.19 ldapDisplayName: apple-keyword attributeSyntax: 2.5.5.12 adminDescription: keywords oMSyntax: 64 systemOnly: FALSE # Attribute: apple-mcxflags dn: cn=apple-mcxflags,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.10 ldapDisplayName: apple-mcxflags attributeSyntax: 2.5.5.12 adminDescription: mcx flags oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-mcxsettings dn: cn=apple-mcxsettings,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.16 ldapDisplayName: apple-mcxsettings attributeSyntax: 2.5.5.12 adminDescription: mcx settings oMSyntax: 64 systemOnly: FALSE # Attribute: apple-neighborhoodalias dn: cn=apple-neighborhoodalias,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.20.2 ldapDisplayName: apple-neighborhoodalias attributeSyntax: 2.5.5.12 adminDescription: XML plist referring to another neighborhood record oMSyntax: 64 systemOnly: FALSE # Attribute: apple-networkview dn: cn=apple-networkview,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.10.3 ldapDisplayName: apple-networkview attributeSyntax: 2.5.5.12 adminDescription: Network view for the computer oMSyntax: 64 systemOnly: FALSE # Attribute: apple-nodepathxml dn: cn=apple-nodepathxml,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.20.1 ldapDisplayName: apple-nodepathxml attributeSyntax: 2.5.5.12 adminDescription: XML plist of directory node path oMSyntax: 64 systemOnly: FALSE # Attribute: apple-service-location dn: cn=apple-service-location,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.5 ldapDisplayName: apple-service-location attributeSyntax: 2.5.5.12 adminDescription: Service location oMSyntax: 64 systemOnly: FALSE # Attribute: apple-service-port dn: cn=apple-service-port,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.3 ldapDisplayName: apple-service-port attributeSyntax: 2.5.5.9 adminDescription: Service port number oMSyntax: 2 systemOnly: FALSE # Attribute: apple-service-type dn: cn=apple-service-type,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.1 ldapDisplayName: apple-service-type attributeSyntax: 2.5.5.5 adminDescription: type of service oMSyntax: 22 systemOnly: FALSE # Attribute: apple-service-url dn: cn=apple-service-url,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.2 ldapDisplayName: apple-service-url attributeSyntax: 2.5.5.5 adminDescription: URL of service oMSyntax: 22 systemOnly: FALSE # Attribute: apple-user-authenticationhint dn: cn=apple-user-authenticationhint,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.15 ldapDisplayName: apple-user-authenticationhint attributeSyntax: 2.5.5.12 adminDescription: password hint oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-class dn: cn=apple-user-class,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.7 ldapDisplayName: apple-user-class attributeSyntax: 2.5.5.5 adminDescription: user class oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-homequota dn: cn=apple-user-homequota,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.8 ldapDisplayName: apple-user-homequota attributeSyntax: 2.5.5.5 adminDescription: home directory quota oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-homesoftquota dn: cn=apple-user-homesoftquota,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.17 ldapDisplayName: apple-user-homesoftquota attributeSyntax: 2.5.5.5 adminDescription: home directory soft quota oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-homeurl dn: cn=apple-user-homeurl,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.6 ldapDisplayName: apple-user-homeurl attributeSyntax: 2.5.5.5 adminDescription: home directory URL oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-mailattribute dn: cn=apple-user-mailattribute,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.9 ldapDisplayName: apple-user-mailattribute attributeSyntax: 2.5.5.12 adminDescription: mail attribute oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-picture dn: cn=apple-user-picture,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.12 ldapDisplayName: apple-user-picture attributeSyntax: 2.5.5.12 adminDescription: picture oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-printattribute dn: cn=apple-user-printattribute,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.13 ldapDisplayName: apple-user-printattribute attributeSyntax: 2.5.5.12 adminDescription: print attribute oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-webloguri dn: cn=apple-webloguri,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.22 ldapDisplayName: apple-webloguri attributeSyntax: 2.5.5.12 adminDescription: Weblog URI oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-xmlplist dn: cn=apple-xmlplist,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.17.1 ldapDisplayName: apple-xmlplist attributeSyntax: 2.5.5.12 adminDescription: XML plist data oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: ipHostNumber dn: cn=ipHostNumber,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.1.1.1.19 ldapDisplayName: ipHostNumber attributeSyntax: 2.5.5.5 adminDescription: IP address oMSyntax: 22 systemOnly: FALSE rangeUpper: 128 # Attribute: macAddress dn: cn=macAddress,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.1.1.1.22 ldapDisplayName: macAddress attributeSyntax: 2.5.5.5 adminDescription: MAC address oMSyntax: 22 systemOnly: FALSE rangeUpper: 128 # Attribute: mountDirectory dn: cn=apple-mountDirectory,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.1 ldapDisplayName: mountDirectory attributeSyntax: 2.5.5.12 adminDescription: mount path oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: mountDumpFrequency dn: cn=apple-mountDumpFrequency,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.4 ldapDisplayName: mountDumpFrequency attributeSyntax: 2.5.5.5 adminDescription: mount dump frequency oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: mountOption dn: cn=apple-mountOption,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.3 ldapDisplayName: mountOption attributeSyntax: 2.5.5.5 adminDescription: mount options oMSyntax: 22 systemOnly: FALSE # Attribute: mountPassNo dn: cn=apple-mountPassNo,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.5 ldapDisplayName: mountPassNo attributeSyntax: 2.5.5.5 adminDescription: mount passno oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: mountType dn: cn=apple-mountType,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.2 ldapDisplayName: mountType attributeSyntax: 2.5.5.5 adminDescription: mount VFS type oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: ttl dn: cn=ttl,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.250.1.60 ldapDisplayName: ttl attributeSyntax: 2.5.5.9 oMSyntax: 2 isSingleValued: TRUE systemOnly: FALSE dn: changetype: modify add: schemaUpdateNow schemaUpdateNow: 1 - # ================================================================== # Classes # ================================================================== # Class: apple-computer dn: cn=apple-computer,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.10 ldapDisplayName: apple-computer adminDescription: computer objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-category mayContain: 1.3.6.1.4.1.63.1000.1.1.1.10.4 # mayContain: apple-computer-list-groups mayContain: 1.3.6.1.4.1.63.1000.1.1.1.11.4 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 # mayContain: apple-networkview mayContain: 1.3.6.1.4.1.63.1000.1.1.1.10.3 # mayContain: apple-service-url mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.2 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 # mayContain: macAddress mayContain: 1.3.6.1.1.1.1.22 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 # Class: apple-computer-list dn: cn=apple-computer-list,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.11 ldapDisplayName: apple-computer-list adminDescription: computer list objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-computer-list-groups mayContain: 1.3.6.1.4.1.63.1000.1.1.1.11.4 # mayContain: apple-computers mayContain: 1.3.6.1.4.1.63.1000.1.1.1.11.3 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-configuration dn: cn=apple-configuration,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.12 ldapDisplayName: apple-configuration adminDescription: configuration objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-data-stamp mayContain: 1.3.6.1.4.1.63.1000.1.1.1.12.2 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-group dn: cn=apple-group,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.14 ldapDisplayName: apple-group adminDescription: group account objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-group-homeowner mayContain: 1.3.6.1.4.1.63.1000.1.1.1.14.2 # mayContain: apple-group-homeurl mayContain: 1.3.6.1.4.1.63.1000.1.1.1.14.1 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 # mayContain: apple-user-picture mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.12 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 # Class: apple-location dn: cn=apple-location,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.18 ldapDisplayName: apple-location objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-dns-domain mayContain: 1.3.6.1.4.1.63.1000.1.1.1.18.1 # mayContain: apple-dns-nameserver mayContain: 1.3.6.1.4.1.63.1000.1.1.1.18.2 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-neighborhood dn: cn=apple-neighborhood,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.20 ldapDisplayName: apple-neighborhood objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-category mayContain: 1.3.6.1.4.1.63.1000.1.1.1.10.4 # mayContain: apple-computeralias mayContain: 1.3.6.1.4.1.63.1000.1.1.1.20.3 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-neighborhoodalias mayContain: 1.3.6.1.4.1.63.1000.1.1.1.20.2 # mayContain: apple-nodepathxml mayContain: 1.3.6.1.4.1.63.1000.1.1.1.20.1 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 possSuperiors: 2.5.6.5 possSuperiors: container # Class: apple-serverassistant-config dn: cn=apple-serverassistant-config,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.17 ldapDisplayName: apple-serverassistant-config objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-service dn: cn=apple-service,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.19 ldapDisplayName: apple-service objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mustContain: apple-service-type mustContain: 1.3.6.1.4.1.63.1000.1.1.1.19.1 # mayContain: apple-dnsname mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.4 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-service-location mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.5 # mayContain: apple-service-port mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.3 # mayContain: apple-service-url mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.2 # mayContain: ipHostNumber mayContain: 1.3.6.1.1.1.1.19 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-user dn: cn=apple-user,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.1 ldapDisplayName: apple-user adminDescription: apple user account objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-imhandle mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.21 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 # mayContain: apple-user-authenticationhint mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.15 # mayContain: apple-user-class mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.7 # mayContain: apple-user-homequota mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.8 # mayContain: apple-user-homesoftquota mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.17 # mayContain: apple-user-homeurl mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.6 # mayContain: apple-user-mailattribute mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.9 # mayContain: apple-user-picture mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.12 # mayContain: apple-user-printattribute mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.13 # mayContain: apple-webloguri mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.22 # Class: mount dn: cn=apple-mount,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.8 ldapDisplayName: mount objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: mountDirectory mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.1 # mayContain: mountDumpFrequency mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.4 # mayContain: mountOption mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.3 # mayContain: mountPassNo mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.5 # mayContain: mountType mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.2 possSuperiors: 2.5.6.5 possSuperiors: container dn: changetype: modify add: schemaUpdateNow schemaUpdateNow: 1 - # ================================================================== # Updating present elements # ================================================================== # Add the new class to the user object dn: CN=User,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-user - # Add the new class to the computer object dn: CN=Computer,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-computer - # Add the new class to the group object dn: CN=Group,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-group - # Add the new class to the configuration object dn: CN=Configuration,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-configuration -

Read the article

Spam Activity From my computer

- by Bnymn

I'm using Ubuntu 12.04 64bit. I'm using HTTP proxy over ssh as mentioned here. If I do not start TinyProxy, everything is OK. But, when I start TinyProxy, I'm getting the following. I think there is an application running on my machine and watching the proxy to start. But I could not decide which one it could be. ps ax PID TTY STAT TIME COMMAND 1 ? Ss 0:01 /sbin/init 2 ? S 0:00 [kthreadd] 3 ? S 0:00 [ksoftirqd/0] 6 ? S 0:00 [migration/0] 7 ? S 0:00 [watchdog/0] 21 ? S< 0:00 [cpuset] 22 ? S< 0:00 [khelper] 23 ? S 0:00 [kdevtmpfs] 24 ? S< 0:00 [netns] 26 ? S 0:00 [sync_supers] 27 ? S 0:00 [bdi-default] 28 ? S< 0:00 [kintegrityd] 29 ? S< 0:00 [kblockd] 30 ? S< 0:00 [ata_sff] 31 ? S 0:00 [khubd] 32 ? S< 0:00 [md] 34 ? S 0:00 [khungtaskd] 35 ? S 0:00 [kswapd0] 36 ? SN 0:00 [ksmd] 37 ? SN 0:00 [khugepaged] 38 ? S 0:00 [fsnotify_mark] 39 ? S 0:00 [ecryptfs-kthrea] 40 ? S< 0:00 [crypto] 48 ? S< 0:00 [kthrotld] 49 ? S 0:00 [scsi_eh_0] 50 ? S 0:00 [scsi_eh_1] 51 ? S 0:00 [scsi_eh_2] 52 ? S 0:00 [scsi_eh_3] 75 ? S< 0:00 [devfreq_wq] 240 ? S< 0:00 [xfs_mru_cache] 241 ? S< 0:00 [xfslogd] 242 ? S< 0:00 [xfsdatad] 243 ? S< 0:00 [xfsconvertd] 245 ? S 0:00 [xfsbufd/sda3] 246 ? S 0:01 [xfsaild/sda3] 330 ? S 0:00 upstart-udev-bridge --daemon 333 ? Ss 0:00 /sbin/udevd --daemon 472 ? S< 0:00 [cfg80211] 479 ? S< 0:00 [kpsmoused] 671 ? S 0:00 upstart-socket-bridge --daemon 779 ? S 0:00 [xfsbufd/sda4] 781 ? S 0:01 [xfsaild/sda4] 785 ? S< 0:00 [ttm_swap] 800 ? S< 0:00 [hd-audio0] 803 ? S< 0:00 [hd-audio1] 857 ? Sl 0:00 rsyslogd -c5 869 ? Ss 0:04 dbus-daemon --system --fork --activation=upstart 881 ? Ss 0:00 /usr/sbin/modem-manager 883 ? Ss 0:00 /usr/sbin/bluetoothd 905 ? Ssl 0:02 NetworkManager 906 ? Ss 0:00 /usr/sbin/cupsd -F 910 ? Sl 0:02 /usr/lib/policykit-1/polkitd --no-debug 918 ? S 0:00 avahi-daemon: running [bunyamin-hp.local] 919 ? S 0:00 avahi-daemon: chroot helper 920 ? S< 0:00 [krfcommd] 956 ? Ss 0:00 /sbin/wpa_supplicant -B -P /run/sendsigs.omit.d/wpasupplicant.pid -u -s -O /var/run/wpa_supplicant 980 tty4 Ss+ 0:00 /sbin/getty -8 38400 tty4 985 tty5 Ss+ 0:00 /sbin/getty -8 38400 tty5 1000 tty2 Ss+ 0:00 /sbin/getty -8 38400 tty2 1006 tty3 Ss+ 0:00 /sbin/getty -8 38400 tty3 1009 tty6 Ss+ 0:00 /sbin/getty -8 38400 tty6 1024 ? Ss 0:00 acpid -c /etc/acpi/events -s /var/run/acpid.socket 1025 ? Ss 0:00 atd 1026 ? Ss 0:00 cron 1029 ? Ss 0:01 /usr/sbin/irqbalance 1034 ? Ssl 0:00 whoopsie 1091 ? Ssl 0:00 lightdm 1216 tty1 Ss+ 0:00 /sbin/getty -8 38400 tty1 1224 ? Sl 0:00 /usr/lib/accountsservice/accounts-daemon 1241 ? Sl 0:00 /usr/sbin/console-kit-daemon --no-daemon 1356 ? Sl 0:00 /usr/lib/upower/upowerd 1447 ? Sl 0:00 /usr/lib/x86_64-linux-gnu/colord/colord 1539 ? SNl 0:00 /usr/lib/rtkit/rtkit-daemon 1723 ? Sl 0:00 /usr/lib/udisks/udisks-daemon 1724 ? S 0:00 udisks-daemon: not polling any devices 2077 ? Z 0:00 [lightdm] <defunct> 2433 ? Z 0:00 [lightdm] <defunct> 3491 ? S 0:00 [flush-8:0] 4023 ? S 0:00 [kworker/u:14] 4034 ? S 0:00 [migration/1] 4035 ? S 0:00 [kworker/1:3] 4036 ? S 0:00 [ksoftirqd/1] 4037 ? S 0:00 [watchdog/1] 4038 ? S 0:00 [migration/2] 4040 ? S 0:00 [ksoftirqd/2] 4041 ? S 0:00 [watchdog/2] 4042 ? S 0:00 [migration/3] 4043 ? S 0:00 [kworker/3:1] 4044 ? S 0:00 [ksoftirqd/3] 4045 ? S 0:00 [watchdog/3] 4047 ? S 0:00 [irq/43-mei] 4070 ? S 0:00 [kworker/3:0] 4072 ? S 0:00 [kworker/1:0] 4164 ? Ss 0:00 anacron -s 4549 tty7 Ss+ 1:13 /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch 4683 ? Sl 0:00 lightdm --session-child 12 47 4718 ? Sl 0:00 /usr/bin/gnome-keyring-daemon --daemonize --login 4729 ? Ssl 0:00 gnome-session --session=gnome-fallback 4765 ? Ss 0:00 /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session gnome-session --session=gnome-fallback 4768 ? S 0:00 /usr/bin/dbus-launch --exit-with-session gnome-session --session=gnome-fallback 4769 ? Ss 0:00 //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session 4779 ? Sl 0:01 /usr/lib/gnome-settings-daemon/gnome-settings-daemon 4786 ? S 0:00 /usr/lib/gvfs/gvfsd 4788 ? Sl 0:00 /usr/lib/gvfs//gvfs-fuse-daemon -f /home/bunyamin/.gvfs 4797 ? Sl 0:00 /usr/lib/gnome-settings-daemon/gsd-printer 4799 ? Sl 0:03 metacity 4805 ? S 0:00 /usr/lib/x86_64-linux-gnu/gconf/gconfd-2 4811 ? Sl 0:10 gnome-panel 4814 ? S 0:00 syndaemon -i 2.0 -K -R -t 4819 ? S<l 0:00 /usr/bin/pulseaudio --start --log-target=syslog 4821 ? Sl 0:00 /usr/lib/dconf/dconf-service 4826 ? Sl 0:00 /usr/lib/gnome-settings-daemon/gnome-fallback-mount-helper 4828 ? Sl 0:06 nautilus -n 4830 ? Sl 0:02 nm-applet 4832 ? Sl 0:00 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 4835 ? Sl 0:00 bluetooth-applet 4851 ? S 0:00 /usr/lib/pulseaudio/pulse/gconf-helper 4854 ? Sl 0:04 /usr/lib/indicator-applet/indicator-applet-complete 4859 ? S 0:00 /usr/lib/gvfs/gvfs-gdu-volume-monitor 4863 ? S 0:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor 4865 ? Sl 0:00 /usr/lib/gvfs/gvfs-afc-volume-monitor 4871 ? S 0:00 /usr/lib/gvfs/gvfsd-trash --spawner :1.6 /org/gtk/gvfs/exec_spaw/0 4874 ? Sl 0:00 /usr/lib/indicator-application/indicator-application-service 4876 ? Sl 0:00 /usr/lib/indicator-datetime/indicator-datetime-service 4878 ? Sl 0:00 /usr/lib/indicator-messages/indicator-messages-service 4887 ? Sl 0:00 /usr/lib/indicator-printers/indicator-printers-service 4888 ? Sl 0:00 /usr/lib/indicator-session/indicator-session-service 4889 ? Sl 0:00 /usr/lib/indicator-sound/indicator-sound-service 4906 ? S 0:00 /usr/lib/geoclue/geoclue-master 4929 ? S 0:00 /usr/lib/ubuntu-geoip/ubuntu-geoip-provider 4938 ? Sl 0:11 /usr/lib/gnome-applets/multiload-applet-2 4939 ? Sl 0:01 /usr/lib/gnome-applets/cpufreq-applet 4953 ? S 0:00 /usr/lib/gvfs/gvfsd-metadata 4955 ? S 0:00 /usr/lib/gvfs/gvfsd-burn --spawner :1.6 /org/gtk/gvfs/exec_spaw/1 4957 ? Sl 3:22 /usr/lib/firefox/firefox 4973 ? Sl 0:00 /usr/lib/x86_64-linux-gnu/at-spi2-core/at-spi-bus-launcher 4997 ? Sl 0:00 /usr/lib/gnome-disk-utility/gdu-notification-daemon 5000 ? Sl 0:00 telepathy-indicator 5007 ? Sl 0:00 /usr/lib/telepathy/mission-control-5 5012 ? Sl 0:00 /usr/lib/gnome-online-accounts/goa-daemon 5018 ? Sl 0:00 gnome-screensaver 5019 ? Sl 0:01 zeitgeist-datahub 5025 ? Sl 0:00 /usr/bin/zeitgeist-daemon 5033 ? Sl 0:00 /usr/lib/zeitgeist/zeitgeist-fts 5041 ? S 0:00 /bin/cat 5052 ? Sl 0:08 /usr/bin/gnome-terminal -x /bin/sh -c '/home/bunyamin/Desktop/SSH Tunnel' 5058 ? S 0:00 gnome-pty-helper 5067 ? Sl 0:00 update-notifier 5090 ? S 0:00 /usr/bin/python /usr/lib/system-service/system-service-d 5130 ? Sl 0:00 /usr/lib/deja-dup/deja-dup/deja-dup-monitor 5135 ? S 0:00 /bin/sh -c nice run-parts --report /etc/cron.daily 5136 ? SN 0:00 run-parts --report /etc/cron.daily 5358 pts/4 Ss 0:00 bash 5482 ? S 0:00 [kworker/0:1] 5487 ? S 0:01 [kworker/2:0] 5550 ? Sl 1:15 /usr/lib/firefox/plugin-container /usr/lib/flashplugin-installer/libflashplayer.so -greomni /usr/lib/firefox/omni.ja 4957 true plugin 5717 ? S 0:00 /usr/lib/cups/notifier/dbus dbus:// 5824 ? SN 0:00 /bin/sh /etc/cron.daily/update-notifier-common 5825 ? SN 0:00 /usr/bin/python /usr/lib/update-notifier/package-data-downloader 5872 ? Sl 0:00 /usr/lib/notify-osd/notify-osd 5888 ? S 0:00 /sbin/udevd --daemon 5889 ? S 0:00 /sbin/udevd --daemon 5909 ? S 0:00 /sbin/dhclient -d -4 -sf /usr/lib/NetworkManager/nm-dhcp-client.action -pf /var/run/sendsigs.omit.d/network-manager.dhclient-eth1.pid -lf /var/lib/dhcp/dhclient-f5f0 5912 ? S 0:00 /usr/sbin/dnsmasq --no-resolv --keep-in-foreground --no-hosts --bind-interfaces --pid-file=/var/run/sendsigs.omit.d/network-manager.dnsmasq.pid --listen-address=127. 5975 pts/1 Ss+ 0:00 /bin/sh -c '/home/bunyamin/Desktop/SSH Tunnel' 5976 pts/1 S+ 0:00 /bin/sh /home/bunyamin/Desktop/SSH Tunnel 5977 pts/1 S+ 0:00 ssh -p443 [email protected] -L 8000:127.0.0.1:8000 5980 ? Sl 0:00 /usr/lib/gvfs/gvfsd-http --spawner :1.6 /org/gtk/gvfs/exec_spaw/2 6034 ? S 0:00 [kworker/u:0] 6054 ? S 0:00 [kworker/2:2] 6070 ? S 0:00 [kworker/0:3] 6094 ? Sl 0:02 gedit /home/bunyamin/Desktop/a.html 6101 ? S 0:00 [kworker/0:2] 6130 pts/4 R+ 0:00 ps ax TinyProxy LOG connect to ad.adserverplus.com:80 mx1.u4gf.com - - [17/Oct/2012 07:38:53] "GET http://ad.tagjunction.com/imp?Z=160x600&s=2959021&T=3&_salt=1516586745&B=12&m=2&u=http%3A%2F%2Fsunshinefelling.com%2Findex.php%3Fview%3Darticle%26catid%3D45%253Aplus-size-dresses%26id%3D7512%253A2012-01-25-22-42-00%26format%3Dpdf%26option%3Dcom_content%26Itemid%3D101&r=1 HTTP/1.0" - - bye bye bye connect to ad.adserverplus.com:80 connect to ad.bharatstudent.com:80 connect to ad.yieldmanager.com:80 142.91.199.250.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=0x0&y=29&s=2913320&_salt=2228719469&B=12&m=2&r=1 HTTP/1.0" - - 173.208.94.117 - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=0x0&y=29&s=3187816&_salt=462045326&B=12&m=2&r=1 HTTP/1.0" - - mx1.a54m.com - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=300x250&s=2887338&T=3&_salt=2925281520&B=12&m=2&u=http%3A%2F%2Fsecretskirt.com%2Findex.php%3Foption%3Dcom_contact%26view%3Dcontact%26id%3D1%26Itemid%3D95&r=1 HTTP/1.0" - - 108.62.75.54.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=300x250&s=3218437&T=3&_salt=2939054384&B=12&m=2&u=http%3A%2F%2Fwww.vifinances.com%2Ffinance-investing%2Finsurance-investment%2Fis-life-insurance-investment-necessarily-the-way-to-go.html&r=1 HTTP/1.0" - - connect to ad.yieldmanager.com:80 connect to ad.globe7.com:80 bye connect to ad.globe7.com:80 connect to ad.globe7.com:80 bye 173.208.94.22 - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=728x90&s=2922824&T=3&_salt=705371051&B=12&m=2&u=%3A%2F%2Fsunshinefelling.com%2Findex.php%3Fview%3Darticle%26catid%3D44%3Amature-womens-fashion%26id%3D6917%3A2012-01-25-22-37-27%26tmpl%3Dcomponent%26print%3D1%26layout%3Ddefault%26page%3D&r=1 HTTP/1.0" - - bye 23.19.10.44.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globe7.com/st?ad_type=iframe&ad_size=160x600&section=3512129&pub_url=${PUB_URL} HTTP/1.0" - - connect to ad.yieldmanager.com:80 bye 142.91.189.27.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globe7.com/imp?Z=0x0&y=29&s=3660215&_salt=2921537966&B=12&m=2&r=1 HTTP/1.0" - - connect to ad.scanmedios.com:80 bye 142.91.217.158.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globaltakeoff.net/st?ad_type=iframe&ad_size=160x600&section=2077929&pub_url=${PUB_URL} HTTP/1.0" - - 23.19.76.194.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=728x90&s=3127996&T=3&_salt=1952612979&B=12&m=2&u=http%3A%2F%2Fwww.oseey.com%2Fpure-core-watch%2Fcarbon-fiber-watch%2Fcarbon-monoxide-poisoning-awareness.html&r=1 HTTP/1.0" - - mx1.e6sb.com - - [17/Oct/2012 07:38:53] "GET http://ad.scanmedios.com/imp?Z=728x90&s=3522638&T=3&_salt=3444993091&B=12&m=2&u=http%3A%2F%2Fsunshinefelling.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D6013%3A2012-01-25-22-25-54%26catid%3D40%3Abig-beautiful-women-fashion%26Itemid%3D96&r=1 HTTP/1.0" - - connect to ad.tagjunction.com:80 connect to ad.yieldmanager.com:80 bye connect to ad.yieldmanager.com:80 23.19.76.154.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/st?ad_type=iframe&ad_size=300x250&section=2569393 HTTP/1.0" - - connect to ads.creafi-online-media.com:80 bye 108.62.109.115.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=0x0&y=29&s=3315330&_salt=2385926515&B=12&m=2&r=1 HTTP/1.0" - - 142.91.217.214.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=3634166&T=3&_salt=1590442300&B=12&m=2&u=http%3A%2F%2Fwealthterritory.com%2Findex.php%3Foption%3Dcom_mailto%26tmpl%3Dcomponent%26link%3DaHR0cDovL3dlYWx0aHRlcnJpdG9yeS5jb20vaW5kZXgucGhwP29wdGlvbj1jb21fY29udGVudCZ2aWV3PWFydGljbGUmaWQ9NDY2NDoyMDExLTA3LTA2LTEzLTI2LTUwJmNhdGlkPTQxOnNlcnZpY2VzJkl0ZW1pZ&r=1 HTTP/1.0" - - 108.62.185.184.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ads.creafi-online-media.com/imp?Z=728x90&s=2885766&T=3&_salt=107120374&B=12&m=2&u=http%3A%2F%2Feconomicccore.com%2Findex.php%3Foption%3Dcom_content%26view%3Dcategory%26layout%3Dblog%26id%3D48%26Itemid%3D98%26limitstart%3D45&r=1 HTTP/1.0" - - bye bye bye connect to ad.adserverplus.com:80 connect to ad.yieldmanager.com:80 connect to ad.tagjunction.com:80 bye 108.62.75.252.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/st?ad_type=iframe&ad_size=728x90&section=3213387&pub_url=${PUB_URL} HTTP/1.0" - - bye connect to ad.tagjunction.com:80 bye connect to ad.yieldmanager.com:80 173.208.94.29 - - [17/Oct/2012 07:38:53] "GET http://ad.tagjunction.com/st?ad_type=iframe&ad_size=728x90&section=3006024&pub_url=${PUB_URL} HTTP/1.0" - - 23.19.31.84.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=0x0&y=29&s=2586703&_salt=2905995697&B=12&m=2&r=1 HTTP/1.0" - - oxx-ef-Words.ipwagon.net - - [17/Oct/2012 07:38:53] "GET http://ad.tagjunction.com/imp?Z=0x0&y=29&s=3630499&_salt=4037530564&B=12&m=2&r=1 HTTP/1.0" - - 142.91.185.53.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.tagjunction.com/imp?Z=0x0&y=29&s=3512541&_salt=1134875077&B=12&m=2&r=1 HTTP/1.0" - - connect to ad.globe7.com:80 108.177.187.37.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=300x250&s=3168350&T=3&_salt=548860046&B=12&m=2&u=http%3A%2F%2Flifehealthyliving.com%2Findex.php%3Fview%3Darticle%26catid%3D34%253Ahealthy-food%26id%3D4681%253A2012-05-16-20-40-19%26tmpl%3Dcomponent%26print%3D1%26layout%3Ddefault%26page%3D%26option%3Dcom_content%26Itemid%3D53&r=1 HTTP/1.0" - - connect to ad.adserverplus.com:80 bye connect to ads.creafi-online-media.com:80 108.177.223.180.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=300x250&s=3331290&T=3&_salt=1270334669&B=12&m=2&u=http%3A%2F%2Fwww.vegls.com%2Faccident-attorneys-firms%2Fauto-accident-attorney%2Ffind-the-correct-auto-accident-attorney.html&r=1 HTTP/1.0" - - bye 142.91.185.38.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globe7.com/st?ad_type=iframe&ad_size=160x600&section=818253 HTTP/1.0" - - connect to ad.yieldmanager.com:80 bye bye bye 108.62.75.230.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ads.creafi-online-media.com/st?ad_type=pop&ad_size=0x0&section=3323456&banned_pop_types=29&pop_times=1&pop_frequency=86400&pub_url=${PUB_URL} HTTP/1.0" - - connect to ad.adserverplus.com:80 bye connect to ad.adserverplus.com:80 bye 142.91.217.194.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=300x250&s=3068801&T=3&_salt=1246107431&B=12&m=2&u=http%3A%2F%2Fmoodoffashionandbeauty.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D756%3A2011-07-13-13-13-43%26catid%3D36%3Afashion-clothes%26Itemid%3D55&r=1 HTTP/1.0" - - connect to ad.smxchange.com:80 108.62.185.235.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/st?ad_type=iframe&ad_size=300x250&section=3307618&pub_url=${PUB_URL} HTTP/1.0" - - connect to ad.globe7.com:80 bye connect to ad.yieldmanager.com:80 bye bye connect to ad.adserverplus.com:80 connect to ad.yieldmanager.com:80 connect to ad.adserverplus.com:80 connect to ad.yieldmanager.com:80 108.177.168.183.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globe7.com/imp?Z=300x250&s=3582877&T=3&_salt=3271923155&B=12&m=2&u=http%3A%2F%2Fwomenhealthroad.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D5780%3A2011-12-12-16-56-53%26catid%3D40%3Ahealth-issues%26Itemid%3D96&r=1 HTTP/1.0" - - 23.19.3.100.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=2895969&T=3&_salt=207805714&B=12&m=2&u=http%3A%2F%2Feconomicccore.com%2Findex.php%3Fview%3Darticle%26catid%3D46%253Aeconomic-news%26id%3D6079%253A2011-09-29-07-39-13%26format%3Dpdf%26option%3Dcom_content%26Itemid%3D96&r=1 HTTP/1.0" - - bye 142.91.199.212.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/st?ad_type=iframe&ad_size=300x250&section=2956039&pub_url=${PUB_URL} HTTP/1.0" - - bye 142.91.189.169.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=728x90&s=3004691&T=3&_salt=2747591679&B=12&m=2&u=http%3A%2F%2Fwww.qtsfinancial.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D5406%3Afinancial-statement-english-page%26catid%3D43%3Afinancial-analysis%26Itemid%3D99&r=1 HTTP/1.0" - - connect to ad.adserverplus.com:80 23.19.31.58.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=0x0&y=29&s=3323560&_salt=3172064457&B=12&m=2&r=1 HTTP/1.0" - - connect to ad.adserverplus.com:80 iei-ix-Words.ipwagon.net - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=728x90&s=3187813&T=3&_salt=1110944041&B=12&m=2&u=http%3A%2F%2Fwww.workinhouses.com%2Fhtml%2Fwallingford-ct-connecticuts-best-places-for-your-home.html&r=1 HTTP/1.0" - - connect to cookex.amp.yahoo.com:80 173.208.94.116 - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/st?ad_type=iframe&ad_size=300x250&section=3213592&pub_url=${PUB_URL} HTTP/1.0" - - bye bye connect to ad.yieldmanager.com:80 connect to ads.creafi-online-media.com:80 bye 108.62.75.99.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=160x600&s=2913321&T=3&_salt=333033369&B=12&m=2&u=http%3A%2F%2Ffashionstreetlight.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D28850%3A2011-12-20-12-59-39%26catid%3D45%3Afashion-accessories%26Itemid%3D101&r=1 HTTP/1.0" - - bye 142.91.217.208.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://cookex.amp.yahoo.com/v2/cexposer/SIG=18kthu27g/*http%3A//ad.yieldmanager.com/imp?Z=300x250&s=2682517&T=3&_salt=1378331643&B=12&m=2&u=http%3A%2F%2Fwww.economicwindows.com%2Findex.php%3Fview%3Darticle%26catid%3D40%253Afinancial-info%26id%3D3854%253A2011-07-06-13-25-37%26format%3Dpdf%26option%3Dcom_content%26Itemid%3D96&r=1 HTTP/1.0" - - bye bye bye 108.62.185.228.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=0x0&y=29&s=3315448&_salt=4241487555&B=12&m=2&r=1 HTTP/1.0" - - 108.62.185.220.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ads.creafi-online-media.com/st?ad_type=iframe&ad_size=728x90&section=3269968 HTTP/1.0" - - connect to ad.tagjunction.com:80 bye connect to ad.globe7.com:80 bye 142.91.185.47.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.tagjunction.com/st?ad_type=pop&ad_size=0x0&section=2958317&banned_pop_types=29&pop_times=1&pop_frequency=0&pub_url=${PUB_URL} HTTP/1.0" - - bye 108.177.168.183.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globe7.com/imp?Z=160x600&s=3582877&T=3&_salt=1313872999&B=12&m=2&u=http%3A%2F%2Fwomenhealthroad.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D5753%3A2011-12-12-16-56-46%26catid%3D40%3Ahealth-issues%26Itemid%3D96&r=1 HTTP/1.0" - - connect to ad.tagjunction.com:80 bye connect to ad.globe7.com:80 bye connect to ad.adserverplus.com:80 108.62.75.53.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.tagjunction.com/imp?Z=300x250&s=3127172&T=3&_salt=2152278771&B=12&m=2&u=http%3A%2F%2Fwww.oslims.com%2Ffashion-coffee%2Ffashion-slimming-coffee%2Fso-whats-your-poison-coffee-or-tea.html&r=1 HTTP/1.0" - - connect to ad.yieldmanager.com:80 bye bye 108.62.75.170.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/imp?Z=0x0&y=29&s=2909210&_salt=1773835502&B=12&m=2&r=1 HTTP/1.0" - - 23.19.79.3.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.globe7.com/st?ad_type=iframe&ad_size=728x90&section=3571505&pub_url=${PUB_URL} HTTP/1.0" - - 142.91.217.216.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=3630472&T=3&_salt=462936220&B=12&m=2&u=http%3A%2F%2Fwww.economicwindows.com%2Findex.php%3Fview%3Darticle%26catid%3D41%253Afinancial-services%26id%3D4854%253A2011-07-06-13-26-56%26tmpl%3Dcomponent%26print%3D1%26layout%3Ddefault%26page%3D%26option%3Dcom_content%26Itemid%3D97&r=1 HTTP/1.0" - - connect to ad.yieldmanager.com:80 connect to ad.adserverplus.com:80 connect to ad.yieldmanager.com:80 bye connect to ad.yieldmanager.com:80 bye connect to ad.yieldmanager.com:80 142.91.189.176.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=3187822&T=3&_salt=325267799&B=12&m=2&u=http%3A%2F%2Feconomysea.com%2Findex.php%3Foption%3Dcom_mailto%26tmpl%3Dcomponent%26link%3DaHR0cDovL2Vjb25vbXlzZWEuY29tL2luZGV4LnBocD9vcHRpb249Y29tX2NvbnRlbnQmdmlldz1hcnRpY2xlJmlkPTYzNDk6MjAxMS0wOS0yOC0yMC0wNC0xOSZjYXRpZD00NzplY29ub21pYy1uZXdzJkl0ZW1pZD05Nw&r=1 HTTP/1.0" - - connect to ad.adserverplus.com:80 142.91.190.240.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=2956040&T=3&_salt=3354730349&B=12&m=2&u=http%3A%2F%2Fdomarketings.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D279%3AWhy-Contractor-Leads-Are-Best-For-Getting-Ideal-Construction-Prospects%26catid%3D2%3Abusiness&r=1 HTTP/1.0" - - bye 108.62.75.6.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=3323456&T=3&_salt=1244915826&B=12&m=2&u=http%3A%2F%2Fdomarketings.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D989%3AThe-Basics-of-Failure-Mode-and-Effective-Analysis%26catid%3D2%3Abusiness&r=1 HTTP/1.0" - - bye 142.91.217.220.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=728x90&s=2921135&T=3&_salt=1337464905&B=12&m=2&u=http%3A%2F%2Financezone.com%2Findex.php%3Foption%3Dcom_content%26view%3Darticle%26id%3D7236%3A2011-09-05-19-56-54%26catid%3D49%3Acareer-banking%26Itemid%3D99&r=1 HTTP/1.0" - - bye connect to ad.yieldmanager.com:80 108.62.178.229.rdns.ubiquityservers.com - - [17/Oct/2012 07:38:53] "GET http://ad.adserverplus.com/st?ad_type=iframe&ad_size=160x600&section=3168350&pub_url=${PUB_URL} HTTP/1.0" - - connect to ad.yieldmanager.com:80 108.177.168.187.rdns.ubiquity.io - - [17/Oct/2012 07:38:53] "GET http://ad.smxchange.com/st?ad_type=iframe&ad_size=300x250&section=3285387&pop_nofreqcap=1&pub_url=${PUB_URL} HTTP/1.0" - - skg-wr-Words.ipwagon.net - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=0x0&y=29&s=3153972&_salt=3512711469&B=12&m=2&r=1 HTTP/1.0" - - bye connect to ad.yieldmanager.com:80 bye connect to ad.yieldmanager.com:80 mx1.u4gf.com - - [17/Oct/2012 07:38:53] "GET http://ad.yieldmanager.com/imp?Z=160x600&s=2959021&T=3&_salt=1516586745&B=12&m=2&u=http%3A%2F%2Fsunshinefelling.com%2Findex.php%3Fview%3Darticle%26catid%3D45%253Aplus-size-dresses%26id%3D7512%253A2012-01-25-22-42-00%26format%3Dpdf%26option%3Dcom_content%26Itemid%3D101&r=1 HTTP/1.0" - -

Search Results

Search found 14041 results on 562 pages for 'home theater'.

Page 179/562 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186 | Next Page >

- by PictureCo

- by James Taylor

- by Matthew Guay

- by Steve Michelotti

- by Chris Williams

- by Bertrand Le Roy

- by Matthew Guay

- by sathya

- by DigitalGeekery

- by The Geek

- by Christie Flanagan

- by Tetsu

- by Balázs Béla

- by Ryan Sharp

- by Scott McNeil

- by me

- by DigitalGeekery

- by jessica.ebbelaar(at)oracle.com

- by Bill Evjen

- by Marco Russo (SQLBI)

- by Liu Maclean(???)

- by qbn

- by Bnymn

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186 | Next Page >