Search Results

Search found 1822 results on 73 pages for 'bandwidth caps'.

Page 18/73 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• What's wrong with my wireless?

  - by dazzle

  I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

  Read the article

• String Question. How to count the number of A,a, numeric and special char

  - by Brad

  I have randomly created strings such as H*P2[-%-3:5RW0j*;k52vedsSQ5{)ROkb]P/*DZTr*-UX4sp What I want to do is get a count of all Caps, lower case, numeric and special characters in each string as they are generated. I am looking for an output similar to Caps = 5 Lower = 3 numneric = 6 Special = 4 Fictitious values of course. I have gone through the php string pages using count_char, substr_count etc but cant find what I am looking for. Thank you

  Read the article

• Assembly Language Question: Counting upper case and lower case letter from a string

  - by Rizwan

  Write an Assembly Language program named “count letters” that counts the occurrences of all small and capital letters in given below string and then prints the result in the format (Caps, count:: Small, count). String is “bcAdBDeCEad” and it should print this result (Caps, 5:: Small, 6). The program should take address of the source string as a parameter via stack.

  Read the article

• Assembly Language Question: Conting upper case and lower case letter from a string

  - by Rizwan

  Write an Assembly Language program named “count letters” that counts the occurrences of all small and capital letters in given below string and then prints the result in the format (Caps, count:: Small, count).Strings is “bcAdBDeCEad” and it should print this result (Caps, 5:: Small, 6).The program should take address of the source string as a parameter via stack.

  Read the article

• Rule of thumb for capitalizing the letters in a programming language

  - by William

  I was wondering if anyone knew why some programming languages that I see most frequently spelled in all caps (like an acronym), are also commonly written in lower case. FORTRAN, LISP, and COBOL come to mind but I'm sure there are many more. Perhaps there isn't any reason for this, but I'm curious to know if any of these changes are due to standards or decisions by their respective communities. Or are people just getting too lazy to hit the caps lock key? (I know I am)

  Read the article

• Given the following JS/JQUERY, how to prevent it from being case sensitive

  - by nobosh

  I have the following line of code which works well: $("a.grouped_elements[href$=.jpg],a.grouped_elements[href$=.png],a.grouped_elements[href$=.gif]").fancybox(); Problem is, if the href is .JPG it doesn't work it only works with .jpg. How can I make the above case insensitive so either all caps or no caps or a mix all match for the file extension? Thanks

  Read the article

• Given the Following JS/JQUERY, how to prevent it from being case sensative

  - by nobosh

  I have the following line of code which works well: $("a.grouped_elements[href$=.jpg],a.grouped_elements[href$=.png],a.grouped_elements[href$=.gif]").fancybox(); Problem is, if the href is .JPG it doesn't work it only works with .jpg. How can I make the above case insensative so either all caps or no caps or a mix all match for the file extenstion? Thanks

  Read the article

• Good web hosting for ASP.NET MVC 1.0 app

  - by magellings

  I'm looking for hosting for an ASP.NET MVC 1.0 app. I've narrowed down with research to either asphostportal, asphostcentral, godaddy, or 1&1. I've ruled out crystaltech and softsyshosting due to price with better plans. Will be running a small e-commerce site written with ASP.NET MVC 1.0 and want to be sure it will work, as well as looking for cheapest price with best value in regards to disk space/bandwidth. And bandwidth is basically how much data can be sent from your site per month right? Any opinions appreciated as I'm finding this tough to narrow down. I know you can bin deploy MVC but heard full trust mode is required as well as some routing rules in IIS. 1&1 says they can't enable full trust. This is what I was looking at: name data(disk space/bandwidth) price MVCenabled crystal tech 500MB/50GB 7.95 + 7.95 setup 2000MB/200GB 16.95 softsyshosting 500MB/5GB 3.50 + 12/year domain 1000MB/10GB 5.84 3000MB/30GB 13.33 asphostportal 5GB/50GB 5.75 + 8.99/year yes 10GB/100GB 10.25 asphostcentral 2GB/15GB 4.99 yes 3GB/30GB 7.99/month domain free 5GB/40GB 11.99 godaddy 10GB/300GB 10.69 + 4.74/month 150GB/1500GB 6.99/month 1&1 10GB/unlimited 3.99 + free domain 150GB/unlimited 6.99 1&1 seems to be best value if MVC app will work. I'm a bit confused on bandwidth being unlimited. May seem like a good thing, but what if one website on the server is a resource hog because of this?

  Read the article

• Overhead of TLS/SSL on a TCP socket connection?

  - by TK Kocheran

  Is there any bandwidth overhead on using SSL on a TCP connection? I understand, of course, the processing/memory usage overhead in encrypting and decrypting packets, but as far as bandwidth is concerned, what is the difference, if any? For example, given a XML file which is 64KB, will there be any tangible difference in the transfer size of the file over HTTP vs. HTTPS? (Ignoring mod_deflate and mod_gzip, of course)

  Read the article

• Alternative to Amazon's S3 service?

  - by Cory

  Just wondering if there is good alternative to Amazon's S3 service? I like S3 but the bandwidth cost is high. I looked at CouldFiles from Rackspace but the cost is even higher. I don't mind prepaying or having monthly payment in order to reduce the bandwidth cost greatly. Thank you for any help

  Read the article

• Is there a driver for a hub?

  - by Nrew

  Is there a driver for a hub/switch? So that I can control the flow of data from the other computer that currently uses bandwidth, so that I could get higher bandwidth.

  Read the article

• App or apps like NetLimiter Monitor for Linux

  - by Nathaniel

  I find NetLimiter Monitor quite handy on Windows both for the realtime per-process bandwidth monitoring and the recorded data usage. What tool or tools can I use to replicate this functionality in Linux? I am okay using two separate apps for the bandwidth and the usage monitoring, but the usage monitoring is a must have.

  Read the article

• VPS Hosting Transfer Speed Question

  - by user31983

  Hi. I bought a VPS hosting(Bandwidth 500G) at US, and i connect it from China. How to improve the transfer speed when I connected my VPS hosting using WinSCP tool. I found the speed is very slow, just several huandard B/s some time. What's the meaning of Bandwidth 500G? It means the traffict limited? thank you.

  Read the article

• Connect to multiple proxy server

  - by mostafa

  my company share internet through two proxy server. without enterning proxy detail in program such as firefox, I don't have any access to internet. each proxy server bandwidth limit is 512kbps. how can i combine two proxy server traffic to get 1mbps bandwidth? client sucsh as proxifier chain both proxy but only use one of them at a time. if one failed to connect, proxifier connect to other proxy in the chain list.

  Read the article

• Addition of an Extra link to an existing link.

  - by Lawdricky

  I would like to know how to configure a extra link to my Mikrotik Routern or Cisco 3800 series router.In my office our bandwidth is 1mb, which is insufficient.But an extra 4mb was made available to us by a different ISP/hub.How do we integrate this new link into our existing link to boost our bandwidth (N.B it uses a private IP)?Our router has 2 interfaces:1 to the modem n the other to the switch.Kindly reply asap.

  Read the article

• Is webserver bandwith the entire HTTP Request/Responce?

  - by Lienau

  Just a quick question. I'm making a web application where C++ communicates with a php script over HTTP Requests/Response. The data being set back and forth is quite small ~36 bytes. But I plan to have many computers connected, contacting the server quite often. I did the math, and I could potentially have gigabytes of data transfer a month. This isn't too much of problem, but it would be if the bandwidth included the request/response headers the request size would be about ~560 bytes. That's about 16x more bandwidth than I was planning... That would be a lot. If if any one knew how host determine bandwidth and could share, that'd be great. Thanks.

  Read the article

• about the JOGL 2 problem

  - by Chuchinyi

  Please some help me about the JOGL 2 problem(Sorry for previous error format). I complied JOGL2Template.java ok. but execut it with following error. D:\java\java\jogl>javac JOGL2Template.java <== compile ok D:\java\java\jogl>java JOGL2Template <== execute error Exception in thread "main" java.lang.ExceptionInInitializerError at javax.media.opengl.GLProfile.<clinit>(GLProfile.java:1176) at JOGL2Template.<init>(JOGL2Template.java:24) at JOGL2Template.main(JOGL2Template.java:57) Caused by: java.lang.SecurityException: no certificate for gluegen-rt.dll in D:\ java\lib\gluegen-rt-natives-windows-i586.jar at com.jogamp.common.util.JarUtil.validateCertificate(JarUtil.java:350) at com.jogamp.common.util.JarUtil.validateCertificates(JarUtil.java:324) at com.jogamp.common.util.cache.TempJarCache.validateCertificates(TempJa rCache.java:328) at com.jogamp.common.util.cache.TempJarCache.bootstrapNativeLib(TempJarC ache.java:283) at com.jogamp.common.os.Platform$3.run(Platform.java:308) at java.security.AccessController.doPrivileged(Native Method) at com.jogamp.common.os.Platform.loadGlueGenRTImpl(Platform.java:298) at com.jogamp.common.os.Platform.<clinit>(Platform.java:207) ... 3 more there is JOGL2Template.java source code: import java.awt.Dimension; import java.awt.Frame; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import javax.media.opengl.GLAutoDrawable; import javax.media.opengl.GLCapabilities; import javax.media.opengl.GLEventListener; import javax.media.opengl.GLProfile; import javax.media.opengl.awt.GLCanvas; import com.jogamp.opengl.util.FPSAnimator; import javax.swing.JFrame; /* * JOGL 2.0 Program Template For AWT applications */ public class JOGL2Template extends JFrame implements GLEventListener { private static final int CANVAS_WIDTH = 640; // Width of the drawable private static final int CANVAS_HEIGHT = 480; // Height of the drawable private static final int FPS = 60; // Animator's target frames per second // Constructor to create profile, caps, drawable, animator, and initialize Frame public JOGL2Template() { // Get the default OpenGL profile that best reflect your running platform. GLProfile glp = GLProfile.getDefault(); // Specifies a set of OpenGL capabilities, based on your profile. GLCapabilities caps = new GLCapabilities(glp); // Allocate a GLDrawable, based on your OpenGL capabilities. GLCanvas canvas = new GLCanvas(caps); canvas.setPreferredSize(new Dimension(CANVAS_WIDTH, CANVAS_HEIGHT)); canvas.addGLEventListener(this); // Create a animator that drives canvas' display() at 60 fps. final FPSAnimator animator = new FPSAnimator(canvas, FPS); addWindowListener(new WindowAdapter() { // For the close button @Override public void windowClosing(WindowEvent e) { // Use a dedicate thread to run the stop() to ensure that the // animator stops before program exits. new Thread() { @Override public void run() { animator.stop(); System.exit(0); } }.start(); } }); add(canvas); pack(); setTitle("OpenGL 2 Test"); setVisible(true); animator.start(); // Start the animator } public static void main(String[] args) { new JOGL2Template(); } @Override public void init(GLAutoDrawable drawable) { // Your OpenGL codes to perform one-time initialization tasks // such as setting up of lights and display lists. } @Override public void display(GLAutoDrawable drawable) { // Your OpenGL graphic rendering codes for each refresh. } @Override public void reshape(GLAutoDrawable drawable, int x, int y, int w, int h) { // Your OpenGL codes to set up the view port, projection mode and view volume. } @Override public void dispose(GLAutoDrawable drawable) { // Hardly used. } }

  Read the article

• JOGL2 test compiles, but doesn't execute - help?

  - by Chuchinyi

  I have a problem with JOGL2. My JOGL2Template.java compiles fine, but executing it results in the following error: D:\java\java\jogl>javac JOGL2Template.java <== compile ok D:\java\java\jogl>java JOGL2Template <== execute error Exception in thread "main" java.lang.ExceptionInInitializerError at javax.media.opengl.GLProfile.<clinit>(GLProfile.java:1176) at JOGL2Template.<init>(JOGL2Template.java:24) at JOGL2Template.main(JOGL2Template.java:57) Caused by: java.lang.SecurityException: no certificate for gluegen-rt.dll in D:\ java\lib\gluegen-rt-natives-windows-i586.jar at com.jogamp.common.util.JarUtil.validateCertificate(JarUtil.java:350) at com.jogamp.common.util.JarUtil.validateCertificates(JarUtil.java:324) at com.jogamp.common.util.cache.TempJarCache.validateCertificates(TempJa rCache.java:328) at com.jogamp.common.util.cache.TempJarCache.bootstrapNativeLib(TempJarC ache.java:283) at com.jogamp.common.os.Platform$3.run(Platform.java:308) at java.security.AccessController.doPrivileged(Native Method) at com.jogamp.common.os.Platform.loadGlueGenRTImpl(Platform.java:298) at com.jogamp.common.os.Platform.<clinit>(Platform.java:207) ... 3 more Here is the JOGL2Template.java source code: import java.awt.Dimension; import java.awt.Frame; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import javax.media.opengl.GLAutoDrawable; import javax.media.opengl.GLCapabilities; import javax.media.opengl.GLEventListener; import javax.media.opengl.GLProfile; import javax.media.opengl.awt.GLCanvas; import com.jogamp.opengl.util.FPSAnimator; import javax.swing.JFrame; /* * JOGL 2.0 Program Template For AWT applications */ public class JOGL2Template extends JFrame implements GLEventListener { private static final int CANVAS_WIDTH = 640; // Width of the drawable private static final int CANVAS_HEIGHT = 480; // Height of the drawable private static final int FPS = 60; // Animator's target frames per second // Constructor to create profile, caps, drawable, animator, and initialize Frame public JOGL2Template() { // Get the default OpenGL profile that best reflect your running platform. GLProfile glp = GLProfile.getDefault(); // Specifies a set of OpenGL capabilities, based on your profile. GLCapabilities caps = new GLCapabilities(glp); // Allocate a GLDrawable, based on your OpenGL capabilities. GLCanvas canvas = new GLCanvas(caps); canvas.setPreferredSize(new Dimension(CANVAS_WIDTH, CANVAS_HEIGHT)); canvas.addGLEventListener(this); // Create a animator that drives canvas' display() at 60 fps. final FPSAnimator animator = new FPSAnimator(canvas, FPS); addWindowListener(new WindowAdapter() { // For the close button @Override public void windowClosing(WindowEvent e) { // Use a dedicate thread to run the stop() to ensure that the // animator stops before program exits. new Thread() { @Override public void run() { animator.stop(); System.exit(0); } }.start(); } }); add(canvas); pack(); setTitle("OpenGL 2 Test"); setVisible(true); animator.start(); // Start the animator } public static void main(String[] args) { new JOGL2Template(); } @Override public void init(GLAutoDrawable drawable) { // Your OpenGL codes to perform one-time initialization tasks // such as setting up of lights and display lists. } @Override public void display(GLAutoDrawable drawable) { // Your OpenGL graphic rendering codes for each refresh. } @Override public void reshape(GLAutoDrawable drawable, int x, int y, int w, int h) { // Your OpenGL codes to set up the view port, projection mode and view volume. } @Override public void dispose(GLAutoDrawable drawable) { // Hardly used. } } Any ideas what might be the cause of these errors?

  Read the article

• 10 Windows Tweaking Myths Debunked

  - by Chris Hoffman

  Windows is big, complicated, and misunderstood. You’ll still stumble across bad advice from time to time when browsing the web. These Windows tweaking, performance, and system maintenance tips are mostly just useless, but some are actively harmful. Luckily, most of these myths have been stomped out on mainstream sites and forums. However, if you start searching the web, you’ll still find websites that recommend you do these things. Erase Cache Files Regularly to Speed Things Up You can free up disk space by running an application like CCleaner, another temporary-file-cleaning utility, or even the Windows Disk Cleanup tool. In some cases, you may even see an old computer speed up when you erase a large amount of useless files. However, running CCleaner or similar utilities every day to erase your browser’s cache won’t actually speed things up. It will slow down your web browsing as your web browser is forced to redownload the files all over again, and reconstruct the cache you regularly delete. If you’ve installed CCleaner or a similar program and run it every day with the default settings, you’re actually slowing down your web browsing. Consider at least preventing the program from wiping out your web browser cache. Enable ReadyBoost to Speed Up Modern PCs Windows still prompts you to enable ReadyBoost when you insert a USB stick or memory card. On modern computers, this is completely pointless — ReadyBoost won’t actually speed up your computer if you have at least 1 GB of RAM. If you have a very old computer with a tiny amount of RAM — think 512 MB — ReadyBoost may help a bit. Otherwise, don’t bother. Open the Disk Defragmenter and Manually Defragment On Windows 98, users had to manually open the defragmentation tool and run it, ensuring no other applications were using the hard drive while it did its work. Modern versions of Windows are capable of defragmenting your file system while other programs are using it, and they automatically defragment your disks for you. If you’re still opening the Disk Defragmenter every week and clicking the Defragment button, you don’t need to do this — Windows is doing it for you unless you’ve told it not to run on a schedule. Modern computers with solid-state drives don’t have to be defragmented at all. Disable Your Pagefile to Increase Performance When Windows runs out of empty space in RAM, it swaps out data from memory to a pagefile on your hard disk. If a computer doesn’t have much memory and it’s running slow, it’s probably moving data to the pagefile or reading data from it. Some Windows geeks seem to think that the pagefile is bad for system performance and disable it completely. The argument seems to be that Windows can’t be trusted to manage a pagefile and won’t use it intelligently, so the pagefile needs to be removed. As long as you have enough RAM, it’s true that you can get by without a pagefile. However, if you do have enough RAM, Windows will only use the pagefile rarely anyway. Tests have found that disabling the pagefile offers no performance benefit. Enable CPU Cores in MSConfig Some websites claim that Windows may not be using all of your CPU cores or that you can speed up your boot time by increasing the amount of cores used during boot. They direct you to the MSConfig application, where you can indeed select an option that appears to increase the amount of cores used. In reality, Windows always uses the maximum amount of processor cores your CPU has. (Technically, only one core is used at the beginning of the boot process, but the additional cores are quickly activated.) Leave this option unchecked. It’s just a debugging option that allows you to set a maximum number of cores, so it would be useful if you wanted to force Windows to only use a single core on a multi-core system — but all it can do is restrict the amount of cores used. Clean Your Prefetch To Increase Startup Speed Windows watches the programs you run and creates .pf files in its Prefetch folder for them. The Prefetch feature works as a sort of cache — when you open an application, Windows checks the Prefetch folder, looks at the application’s .pf file (if it exists), and uses that as a guide to start preloading data that the application will use. This helps your applications start faster. Some Windows geeks have misunderstood this feature. They believe that Windows loads these files at boot, so your boot time will slow down due to Windows preloading the data specified in the .pf files. They also argue you’ll build up useless files as you uninstall programs and .pf files will be left over. In reality, Windows only loads the data in these .pf files when you launch the associated application and only stores .pf files for the 128 most recently launched programs. If you were to regularly clean out the Prefetch folder, not only would programs take longer to open because they won’t be preloaded, Windows will have to waste time recreating all the .pf files. You could also modify the PrefetchParameters setting to disable Prefetch, but there’s no reason to do that. Let Windows manage Prefetch on its own. Disable QoS To Increase Network Bandwidth Quality of Service (QoS) is a feature that allows your computer to prioritize its traffic. For example, a time-critical application like Skype could choose to use QoS and prioritize its traffic over a file-downloading program so your voice conversation would work smoothly, even while you were downloading files. Some people incorrectly believe that QoS always reserves a certain amount of bandwidth and this bandwidth is unused until you disable it. This is untrue. In reality, 100% of bandwidth is normally available to all applications unless a program chooses to use QoS. Even if a program does choose to use QoS, the reserved space will be available to other programs unless the program is actively using it. No bandwidth is ever set aside and left empty. Set DisablePagingExecutive to Make Windows Faster The DisablePagingExecutive registry setting is set to 0 by default, which allows drivers and system code to be paged to the disk. When set to 1, drivers and system code will be forced to stay resident in memory. Once again, some people believe that Windows isn’t smart enough to manage the pagefile on its own and believe that changing this option will force Windows to keep important files in memory rather than stupidly paging them out. If you have more than enough memory, changing this won’t really do anything. If you have little memory, changing this setting may force Windows to push programs you’re using to the page file rather than push unused system files there — this would slow things down. This is an option that may be helpful for debugging in some situations, not a setting to change for more performance. Process Idle Tasks to Free Memory Windows does things, such as creating scheduled system restore points, when you step away from your computer. It waits until your computer is “idle” so it won’t slow your computer and waste your time while you’re using it. Running the “Rundll32.exe advapi32.dll,ProcessIdleTasks” command forces Windows to perform all of these tasks while you’re using the computer. This is completely pointless and won’t help free memory or anything like that — all you’re doing is forcing Windows to slow your computer down while you’re using it. This command only exists so benchmarking programs can force idle tasks to run before performing benchmarks, ensuring idle tasks don’t start running and interfere with the benchmark. Delay or Disable Windows Services There’s no real reason to disable Windows services anymore. There was a time when Windows was particularly heavy and computers had little memory — think Windows Vista and those “Vista Capable” PCs Microsoft was sued over. Modern versions of Windows like Windows 7 and 8 are lighter than Windows Vista and computers have more than enough memory, so you won’t see any improvements from disabling system services included with Windows. Some people argue for not disabling services, however — they recommend setting services from “Automatic” to “Automatic (Delayed Start)”. By default, the Delayed Start option just starts services two minutes after the last “Automatic” service starts. Setting services to Delayed Start won’t really speed up your boot time, as the services will still need to start — in fact, it may lengthen the time it takes to get a usable desktop as services will still be loading two minutes after booting. Most services can load in parallel, and loading the services as early as possible will result in a better experience. The “Delayed Start” feature is primarily useful for system administrators who need to ensure a specific service starts later than another service. If you ever find a guide that recommends you set a little-known registry setting to improve performance, take a closer look — the change is probably useless. Want to actually speed up your PC? Try disabling useless startup programs that run on boot, increasing your boot time and consuming memory in the background. This is a much better tip than doing any of the above, especially considering most Windows PCs come packed to the brim with bloatware.     

  Read the article

• Can resizing images with css be good?

  - by Echo

  After reading Is CSS resizing of images still a bad idea?, I thought of a similar question. (too similar? should this be closed?) Lets say you need to use 10 different product image sizes throughout your website and you have 20k-30k different product images, should you use 10 different files for each image size? or maybe 5 different files and use css to resize the other 5? Would there ever be combination that would be good? Or should you always make separate image files? If you use css to resize them, you will save on storage (in GBs) but you will have slight increase in bandwidth and slower loading images(but if images are cached, and you show both sizes of the image would you use less bandwidth and have faster loads?) (But of course you wouldn't want to use css to resize images for mobile sites.)

  Read the article

• How to find data usage of a user on my website?

  - by Dharmik

  I have a website (project) where users get logged in, do their work and then they log out. I need to build a report that displays how much each person has used of data. (bandwidth, how much was downloaded in Kb, etc) So the process may be like counting start of usage from user login to user logout. I have seen a little about Webalizer and AWStats for something like this, But I am not sure how they work. I have tried Content-Length but some pages don't send content-length.I have also seen mod_bandwidth but still I am little confused. This process is needed for my site because now, our company is thinking of charging per usage and also bandwidth allocation for each users (according to their membership). I haven't worked with this type of tools, I am newbie in this matter. I have done only simple websites not any setting like this in Apache or Linux. My project is in Codeigniter.

  Read the article

• Announcing: Great Improvements to Windows Azure Web Sites

  - by ScottGu

  I’m excited to announce some great improvements to the Windows Azure Web Sites capability we first introduced earlier this summer.  Today’s improvements include: a new low-cost shared mode scaling option, support for custom domains with shared and reserved mode web-sites using both CNAME and A-Records (the later enabling naked domains), continuous deployment support using both CodePlex and GitHub, and FastCGI extensibility.  All of these improvements are now live in production and available to start using immediately. New “Shared” Scaling Tier Windows Azure allows you to deploy and host up to 10 web-sites in a free, shared/multi-tenant hosting environment. You can start out developing and testing web sites at no cost using this free shared mode, and it supports the ability to run web sites that serve up to 165MB/day of content (5GB/month).  All of the capabilities we introduced in June with this free tier remain the same with today’s update. Starting with today’s release, you can now elastically scale up your web-site beyond this capability using a new low-cost “shared” option (which we are introducing today) as well as using a “reserved instance” option (which we’ve supported since June).  Scaling to either of these modes is easy.  Simply click on the “scale” tab of your web-site within the Windows Azure Portal, choose the scaling option you want to use with it, and then click the “save” button.  Changes take only seconds to apply and do not require any code to be changed, nor the app to be redeployed: Below are some more details on the new “shared” option, as well as the existing “reserved” option: Shared Mode With today’s release we are introducing a new low-cost “shared” scaling mode for Windows Azure Web Sites.  A web-site running in shared mode is deployed in a shared/multi-tenant hosting environment.  Unlike the free tier, though, a web-site in shared mode has no quotas/upper-limit around the amount of bandwidth it can serve.  The first 5 GB/month of bandwidth you serve with a shared web-site is free, and then you pay the standard “pay as you go” Windows Azure outbound bandwidth rate for outbound bandwidth above 5 GB. A web-site running in shared mode also now supports the ability to map multiple custom DNS domain names, using both CNAMEs and A-records, to it.  The new A-record support we are introducing with today’s release provides the ability for you to support “naked domains” with your web-sites (e.g. http://microsoft.com in addition to http://www.microsoft.com).  We will also in the future enable SNI based SSL as a built-in feature with shared mode web-sites (this functionality isn’t supported with today’s release – but will be coming later this year to both the shared and reserved tiers). You pay for a shared mode web-site using the standard “pay as you go” model that we support with other features of Windows Azure (meaning no up-front costs, and you pay only for the hours that the feature is enabled).  A web-site running in shared mode costs only 1.3 cents/hr during the preview (so on average $9.36/month). Reserved Instance Mode In addition to running sites in shared mode, we also support scaling them to run within a reserved instance mode.  When running in reserved instance mode your sites are guaranteed to run isolated within your own Small, Medium or Large VM (meaning no other customers run within it).  You can run any number of web-sites within a VM, and there are no quotas on CPU or memory limits. You can run your sites using either a single reserved instance VM, or scale up to have multiple instances of them (e.g. 2 medium sized VMs, etc).  Scaling up or down is easy – just select the “reserved” instance VM within the “scale” tab of the Windows Azure Portal, choose the VM size you want, the number of instances of it you want to run, and then click save.  Changes take effect in seconds: Unlike shared mode, there is no per-site cost when running in reserved mode.  Instead you pay only for the reserved instance VMs you use – and you can run any number of web-sites you want within them at no extra cost (e.g. you could run a single site within a reserved instance VM or 100 web-sites within it for the same cost).  Reserved instance VMs start at 8 cents/hr for a small reserved VM.  Elastic Scale-up/down Windows Azure Web Sites allows you to scale-up or down your capacity within seconds.  This allows you to deploy a site using the shared mode option to begin with, and then dynamically scale up to the reserved mode option only when you need to – without you having to change any code or redeploy your application. If your site traffic starts to drop off, you can scale back down the number of reserved instances you are using, or scale down to the shared mode tier – all within seconds and without having to change code, redeploy, or adjust DNS mappings.  You can also use the “Dashboard” view within the Windows Azure Portal to easily monitor your site’s load in real-time (it shows not only requests/sec and bandwidth but also stats like CPU and memory usage). Because of Windows Azure’s “pay as you go” pricing model, you only pay for the compute capacity you use in a given hour.  So if your site is running most of the month in shared mode (at 1.3 cents/hr), but there is a weekend when it gets really popular and you decide to scale it up into reserved mode to have it run in your own dedicated VM (at 8 cents/hr), you only have to pay the additional pennies/hr for the hours it is running in the reserved mode.  There is no upfront cost you need to pay to enable this, and once you scale back down to shared mode you return to the 1.3 cents/hr rate.  This makes it super flexible and cost effective. Improved Custom Domain Support Web sites running in either “shared” or “reserved” mode support the ability to associate custom host names to them (e.g. www.mysitename.com).  You can associate multiple custom domains to each Windows Azure Web Site.  With today’s release we are introducing support for A-Records (a big ask by many users). With the A-Record support, you can now associate ‘naked’ domains to your Windows Azure Web Sites – meaning instead of having to use www.mysitename.com you can instead just have mysitename.com (with no sub-name prefix).  Because you can map multiple domains to a single site, you can optionally enable both a www and naked domain for a site (and then use a URL rewrite rule/redirect to avoid SEO problems). We’ve also enhanced the UI for managing custom domains within the Windows Azure Portal as part of today’s release.  Clicking the “Manage Domains” button in the tray at the bottom of the portal now brings up custom UI that makes it easy to manage/configure them: As part of this update we’ve also made it significantly smoother/easier to validate ownership of custom domains, and made it easier to switch existing sites/domains to Windows Azure Web Sites with no downtime. Continuous Deployment Support with Git and CodePlex or GitHub One of the more popular features we released earlier this summer was support for publishing web sites directly to Windows Azure using source control systems like TFS and Git.  This provides a really powerful way to manage your application deployments using source control.  It is really easy to enable this from a website’s dashboard page: The TFS option we shipped earlier this summer provides a very rich continuous deployment solution that enables you to automate builds and run unit tests every time you check in your web-site, and then if they are successful automatically publish to Azure. With today’s release we are expanding our Git support to also enable continuous deployment scenarios and integrate with projects hosted on CodePlex and GitHub.  This support is enabled with all web-sites (including those using the “free” scaling mode). Starting today, when you choose the “Set up Git publishing” link on a website’s “Dashboard” page you’ll see two additional options show up when Git based publishing is enabled for the web-site: You can click on either the “Deploy from my CodePlex project” link or “Deploy from my GitHub project” link to walkthrough a simple workflow to configure a connection between your website and a source repository you host on CodePlex or GitHub.  Once this connection is established, CodePlex or GitHub will automatically notify Windows Azure every time a checkin occurs.  This will then cause Windows Azure to pull the source and compile/deploy the new version of your app automatically.  The below two videos walkthrough how easy this is to enable this workflow and deploy both an initial app and then make a change to it: Enabling Continuous Deployment with Windows Azure Websites and CodePlex (2 minutes) Enabling Continuous Deployment with Windows Azure Websites and GitHub (2 minutes) This approach enables a really clean continuous deployment workflow, and makes it much easier to support a team development environment using Git: Note: today’s release supports establishing connections with public GitHub/CodePlex repositories.  Support for private repositories will be enabled in a few weeks. Support for multiple branches Previously, we only supported deploying from the git ‘master’ branch.  Often, though, developers want to deploy from alternate branches (e.g. a staging or future branch). This is now a supported scenario – both with standalone git based projects, as well as ones linked to CodePlex or GitHub.  This enables a variety of useful scenarios.  For example, you can now have two web-sites - a “live” and “staging” version – both linked to the same repository on CodePlex or GitHub.  You can configure one of the web-sites to always pull whatever is in the master branch, and the other to pull what is in the staging branch.  This enables a really clean way to enable final testing of your site before it goes live. This 1 minute video demonstrates how to configure which branch to use with a web-site. Summary The above features are all now live in production and available to use immediately.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today.  Visit the Windows Azure Developer Center to learn more about how to build apps with it. We’ll have even more new features and enhancements coming in the weeks ahead – including support for the recent Windows Server 2012 and .NET 4.5 releases (we will enable new web and worker role images with Windows Server 2012 and .NET 4.5 next month).  Keep an eye out on my blog for details as these new features become available. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Any way to skip the huge apt-cache-update everytime a repository is added?

  - by Nirmik

  I keep adding atleast one repository per day.! I like new stuff and to personalise my Ubuntu. But now evertime I add a repository,the apt cache needs to be updated and its almost a 10-15min update everyday.! Moreover its a lot data consuming. Is there any way or workaround so that the repository is updated in the apt-cache without updating other stuff? Also,sometimes i do not wish to install some updates at the given point of time due to my bandwidth limitations.But then if i have to add a repository,the updates are all installed in the sudo apt-get update command.. Would like any help. The bandwidth limit is actually a major issue for me.! Thanx :)

  Read the article

• Amazon Web Services Free Trial: query about get and put requests

  - by abel

  Amazon recently introduced a free tier for its cloud offering. I signed up for AWS and while signing up for the free tier of S3, i found this As part of AWS Free Usage Tier, you can get started with Amazon S3 for free. Upon sign-up, new AWS customers receive 5 GB of Amazon S3 storage, 20,000 Get Requests, 2,000 Put Requests, 15GB of bandwidth in and 15GB of bandwidth out each month for one year. source:aws.amazon.com , emphasis mine. 20,000 GET requests & 2000 puts mean , 20,000 page views(max) and 2000 file uploads per month. Isn't that lower than what App Engine offers 43,200,000 requests per day.Am I missing some thing, please help.

  Read the article

• Week in Geek: Botnet Epidemic Fueled by Malware Toolkits Edition

  - by Asian Angel

  This week we learned how to stream media files from any PC to a PlayStation, enable user-specific wireless networks in Windows 7, monitor the bandwidth consumption of individual applications, configure the Linux Grub2 Boot Menu the easy way, “add Dropbox to the Start Menu, understand symbolic links, & rip TV Series DVDs into episode files”, and more Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic] Reclaim Vertical UI Space by Adding a Toolbar to the Left or Right Side of Firefox Androidify Turns You into an Android-style Avatar Reader for Android Updates; Now with Feed Widgets and More

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >