Search Results

Search found 54359 results on 2175 pages for 'error codes'.

Page 18/2175 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• HP D530 Startup Error: 512 - Chassis Fan Not Detected

  - by lyrikles

  I'm using the HP D530 Motherboard/CPU that I installed in a new case with a 600W PSU. There was a problem with the onboard chassis fan connector (3-wire) not supplying sufficient power to the chassis fan indicated by the fan spinning very slowly, but I never experienced the "512 Error" at boot. Also, the same fan works perfectly connected directly to the PSU. I disconnected it since I already have plenty of fans connected via the PSU directly. Since then, on startup, I get the error: "512 - Chassis Fan Not Detected" and am asked to "Press F1 to continue". This gets quite annoying since I use this machine remotely (w/ FreeNAS). What could be causing the onboard fan connector to not be giving enough power? If this is unable to be corrected, how can I make the BIOS think there's a chassis fan plugged in without actually plugging a fan into the onboard connector? Would it be possible to jumper the pins without damaging the motherboard or PSU? Thanks,Erik

  Read the article

• Discount Codes Galore

  - by Cassandra Clark

  Saving money is at the top of everyones list right now. With this in mind the Oracle Technology Network team has compiled a list of discounts available at the Oracle Store. We are also introducing an Oracle Technology Network member discount from O'Reilly Media. If you subscribe to any of the Oracle Technology newsletters you also saw special discounts from CRC Press, Packt Publishing and Apress. We are going to do our best to bring you more offers like this every month. Now on to the discounts... Oracle Store offers - all below expiring May 31st 2010. Don't miss out! Expand Your Productivity with Oracle Open Office and Save 15%? Enter OTNOffice at checkout. Buy Now! Drive Business Agility and Performance with Industry-leading Oracle Database Management Packs.  Save 10% when you purchase them at the Oracle Store. Enter OTNDBMP at checkout. Buy Now! 15% Savings on Oracle Virtualization and Unbreakable Linux Support at the Oracle Store Enter code OTNLinuxVM at checkout. Buy Now! 20% Savings on Oracle SQL Developer Data Modeler Use OTNSQL at checkout. Buy Now! O'Reilly Oracle Technology Network Member Offer O'Reilly is generously offering Oracle Technology Network Members 35% off for print books and 40% off of eBooks. Browse Oracle titles at- http://oreilly.com/pub/topic/oracle. Use discount code TECNT at checkout.

  Read the article

• Randomly getting a 500 error on my website

  - by randylahey

  I am randomly getting a 500 error on my websites, all of which are hosted on a shared server. It won't happen all the time, just randomly when I will refresh the page I will get a 500 error. It usually will come back after I refresh a few times. I've been reading about it and have heard that .htaccess files can cause this... I did recently start using an .htaccess file to tell my server to start using php 5. I got the code straight from the hosting company that I am with. This is what is in the .htaccess file: AddType x-mapp-php5 .php If anyone has any ideas as to what would be causing this, that would really help. Thanks!

  Read the article

• Error logging with PHP and mod_fcgid

  - by nbv4

  I have a mediawiki install that is acting up. Whenever I try to save an article, it goes to a blank screen. All though if I refresh that blank screen, it will go on to work. I have no idea why it's doing that, but it seems to be that it's a problem with PHP. I guess by default errors don't get logged when using mod_fcgid, because I can't find an error log anywhere. I tried enabling logging in the /etc/php5/cgi/php.ini, but that didn't do anything. How do I achieve php error logging? I'm using ubuntu 9.10.

  Read the article

• SCVNGR and QR codes in location-based mobile gaming

  This post is part of the Who's @ Google I/O , a series of blog posts that give a closer look at developers who'll be speaking or demoing...

  Read the article

• OSX: Python packages fail to install, error message "/usr/local/bin: File Exists"

  - by kylehotchkiss

  I keep trying to install django and other python packages, and I keep getting the exact same error message: Installing django-admin.py script to /usr/local/bin error: /usr/local/bin: File exists So I look to make sure that my /usr/local folder is okay. At first glance it appears okay, until I try cd-ing into my bin. It says it can't because it's not a directory. Peculiar, I thought, so then I tried a Anchorage:local khotchkiss$ ls -a -l total 26168 drwxr-xr-x 6 root wheel 204 Dec 26 20:18 . drwxr-xr-x@ 14 root wheel 476 Feb 24 12:54 .. -rwxr-xr-x@ 1 root wheel 13395080 Oct 22 23:04 bin drwxr-xr-x 8 root wheel 272 Dec 26 20:18 git drwxr-xr-x 4 root wheel 136 Dec 18 11:31 include drwxr-xr-x 12 root wheel 408 Dec 18 11:31 lib And haven't a clue of what the 'bin' is, why its so large, and why its preventing me from installing python packages. Any clue?

  Read the article

• How does Google maintain its codes?

  - by John Maxim

  Pagerank algorithm is not revealed to any of their associates programmers, but only accessible by Larry Page or maybe Sergey Brin. I wonder how do they go about managing their coding? There are times when you need to build something up and you may need more hands to help with coding, but you may also want to keep some secrets to yourself, I'm not saying I have secrets, but I wonder how do they manage their coding. I'm sure there are some ways to do it decently and professionally. The reason why friendster failed was because one of the factors they lost control over their coding part. I think this is an interesting question. But not easy to answer, maybe only a marginal knew.

  Read the article

• "File does not exist" in apache error log.

  - by Samuurai

  Hi, This is an example of an error in out log file: File does not exist: /var/www/website/female, referer: http://www.website.com/female/dresses/A-Dress-Black "/female" doesn't exist, because we use friendly urls via our .htaccess file which looks like this: RewriteEngine On # Turn on the rewriting engine RewriteBase / RewriteCond %{http_host} !^www.website.com$ [nc] RewriteRule ^(.*)$ http://www.website.com/$1 [r=301,nc,L] RewriteRule ^News/?$ news.php [NC,L] RewriteRule ^About/?$ about.php [NC,L] RewriteRule ^Contact/?$ contact.php [NC,L] RewriteRule ^Sign-In/Create-Account?$ sign_up_in.php [NC,L] RewriteRule ^Logout?$ sign_up_in.php?l=1 [NC,L] RewriteRule ^Your-Bag?$ your_bag.php [NC,L] RewriteRule ^Help?$ help.php [NC,L] RewriteRule ^Profile?$ profile.php [NC,L] RewriteRule ^Create-Profile?$ profile_create.php [NC,L] # ITEM RewriteRule ^([A-Za-z-]+)/([A-Za-z-]+)/([A-Za-z0-9-]+)/?$ store_focus.php?sex=$1catName=$2&permalink=$3 [NC,L] # PAGE RewriteRule ^([A-Za-z-]+)/([A-Za-z-]+)/page/([0-9]+)/?$ store.php?sex=$1&catName=$2&page=$3 [NC,L] # CATEGORY RewriteRule ^([A-Za-z-]+)/([A-Za-z-]+)/?$ store.php?sex=$1&catName=$2 [NC,L] # SEX RewriteRule ^([A-Za-z-]+)/?$ store.php?sex=$1 [NC,L] Every request for a page results in an error. Has anyone encountered this before? Thanks! Beren

  Read the article

• webmin bind issue- error when i try to start bind

  - by Arvind

  I am setting up a domain = mydomain.com with 2 nameservers ns1.mydomain.com and ns2.mydomain.com in Webmin - BIND. For this, I have registered 2 child nameservers at my domain registrar, and in Webmin-Bind I have set up a new zone for this domain. In this zone, i have specified 2 nameserver records- one each for ns1 and ns2. Also, I have defined 2 address records- one each for ns1.mydomain.com -> IP Address #1 and for ns2.mydomain.com -> IP Address #2 However when I try to start BIND in Webmin, I get the following error-- Failed to start BIND : Starting named: Error in named configuration: zone mydomain.com/IN: has no NS records zone mydomain.com/IN: not loaded due to errors. _default/mydomain.com/IN: bad zone [FAILED]

  Read the article

• Meta tags with html special character codes?

  - by GEspinha

  This question is regarding best practices on SEO development meta tag filling. A name written in the Latin or the Cyrillic alphabet has certain special characters, such as the ccedil C, for example. When populating meta tags and other SEO assets in a page, what should be used, the HTML character code (for the given example: &ccedil;), the actual character or another character that looks close (using a C for the given example)?

  Read the article

• Error with TextMate 2 --shell-escape and gnuplot 10.8.2

  - by Manuel

  I have had TM 1.X since a long time ago, but a week ago I updated my system to Mountain Lion 10.8.2 and installed TM2. The problem is that I write with LaTeX, and sometimes I use gnuplot for the graphs (I installed gnuplot with macports). But now it doesn't work because the --shell-escape doesn't work, this is the error message I get: Package pgfplots Error: Sorry, the gnuplot-result file '"untitled 2.pgf-plot.table"' could not be found. Maybe you need to enable the shell-escape feature? For pdflatex, this is ' pdflatex -shell-escape'. You can also invoke ' gnuplot .gnuplot' manually on the respective gnuplot file.. And then, looking around I discovered that it's not just gnuplot but everything which needs --shell-escape. Question What happened? How can I get TM have the correct rights so this works? It worked right in Snow Leopard with TM 1.5.

  Read the article

• Windows Handling Piped Comands Error Redirection

  - by jpmartins

  Warning: I am no expert on building scripts, and sorry for lousy English. In an case of generating a CSV from a database query I'm using the following commands. ... CALL java.exe -classpath ... com.xigole.util.sql.Jisql -user dmfodbc -pf pwd.file -driver com.sybase.jdbc3.jdbc.SybDriver -cstring %constr% -c ; -input 42.sql -formatter csv -delimiter ; 2%LOGFILE% | CALL grep -v -e "SELECT right" -e "executing: " -e " rows affect" %FicheiroR% 2%LOGFILE% ... I'm using windows implementation of grep. The 2%LOGFILE% in both java and grep command is causing an error message indicating the file is being use by another process. The Ugly workaround i have came up with is to put grep error redirect to a temporary %LOGFILE%.aux java ... | grep ... 2%LOGFILE%.aux type %LOGFILE%.aux % %LOGFILE% del %LOGFILE%.aux What is a better solution?

  Read the article

• S3200SH error 5220 every boot (CMOS/NVRAM Cleared by jumper)

  - by TechAUmNu

  I have a S3200SH Intel server board with a Intel Xeon 3220 Quad Core. Every time I boot it, I get error 5220 (CMOS/NVRAM Cleared by jumper). The jumper is not installed and I have replaced the lithium battery. The board overheated once, although still seems to work fine apart from this error. Also if I leave the board sitting in the bios for a while it sometimes randomly turns off, with all 4 diagnostic LED's red. I have moved the 2GB DIMM to another slot, which seems to have fixed this problem. Any ideas would be greatly appreciated.

  Read the article

• Speaking at UK DevConnections in www.DevConnections.com/uk and discount codes

  - by Testas

   HiI will be speaking at the UK DevConnections on Analysis Services at the ExCeL conference centre in London on 13th-15th June 2011. Join top SQL Server names such as Paul Randall, Kimberley Tripp, Simon Sabin and Allan Mitchell ( to name a few), at the IT & DevConnections powered by Microsoft UK  in London on 13th-15th June 2011. With UK DevConnections you can combine SQL Sessions with other Microsoft technology stacks. Microsoft and leading independent industry presenters will deliver in-depth presentations and cutting edge sessions on  SharePoint Windows Exchange and Unified Communications SQL Server Silverlight ASP.Net Virtualisation Cloud and Azure As a speaker I have a discount code that entitles give 20% off the cost to register for IT&DEvConnections in June.  The code is sql-bits, if people register before the 31st March when the Super Early Bird offer ends you will only pay £639.20 +vat (normal price £999)Furthermore, there are preferential hotel rates for this event at: https://logicalvenues.vbookings.co.uk/b/pentonlondon0611/  So if you want to attend a conference with a wide spectrum of technologies, then DevConnections may be up your street Thanks  Chris

  Read the article

• Error in Windows 7 after watching a MOV file

  - by JosephStyons

  Ever since watching a .MOV file with Windows Media Player on my pc, I am sporadically getting the below error. Does anyone know the cause of this, or a good way to fix it? This link has a hotfix, but it only applies to Windows XP. --------------------------- Microsoft Visual C++ Runtime Library --------------------------- Runtime Error! Program: C:\Windows\system32\DllHost.exe This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. --------------------------- OK --------------------------- I am running Windows 7 with all updates installed.

  Read the article

• "Access Denied" error when starting Windows Security Center service

  - by Isxek

  I am working on a laptop with Windows 7 Ultimate (32-bit) which had previous issues with Microsoft Security Essentials. I've removed the previous installation of Security Essentials and reinstalled it. There's no problem with the said antivirus now, but after a couple of days it was brought back to me because of the error about Windows Security Center service not being started. I've tried setting it to start Automatically instead of "Delayed Start", but I still keep getting "Error 5: Access is Denied." I've searched other possible solutions but it's mostly been either what I did already or "Don't worry about it." Any ideas? Thanks in advance! EDIT: I've scanned the system with both Malwarebytes AM and SUPERAntiSpyware and have found no traces of anything. EDIT2: I have also tried running sfc /scannow to see if the files might be damaged. Got the message no integrity violations were found, however.

  Read the article

• GA UA codes for testing site - set up

  - by Drew

  Anyone know the process for using a GA live UA code to test a site in development. I.e. I have a live site with a GA UA code attached, tracking live traffic data etc e.g. UA-123456. I've been told that there is a way to produce another code associated to the primary code to use on the testing version of my live site e.g. test code could be UA-123457. Can anyone shed some light on this? If not possible should I just set up a completely separate GA account for my testing site?

  Read the article

• bash script - spawn, send, interact - commands not found error

  - by Sandeepan Nath

  I my shell script, I am trying to remove password prompt for scp command (as given in http://stackoverflow.com/questions/459182/using-expect-to-pass-a-password-to-ssh/459225#459225) and this is what I have so far :- #!/usr/bin/expect spawn scp $DESTINATION_PATH/exam.tar $SSH_CREDENTIALS':/'$PROJECT_INSTALLATION_PATH expect "password:" send $sshPassword"\n"; interact On running the script, I am getting errors spawn: command not found send: command not found interact: command not found I was also getting error expect: command not found also, then I realised the path to expect was not correct and expect was not installed at all. So, I did yum install expect, corrected the path and the error was gone. But not able to remove the other 3 errors still.

  Read the article

• Running a defect php file cause error 500

  - by John Brunner

  When I address a PHP file, I always get an error 500. I've looked up the logs of my Apache server, and this displays that some includes etc. in the PHP file address files which don't exist on the server. They don't exist because I'm just testing my PHP file. But could it be achieved that the server runs the php file in every case, even when something is wrong? Every 30 seconds an entry is made in the error_log file which says [Sat Jun 09 17:55:07 2012] [error] [client 10.224.55.160] File does not exist: /var/www/html/index.html ... but there IS an index.html?!

  Read the article

• Darik's Boot And Nuke - ERROR /dev/sda

  - by user1403844

  I'm trying to wipe the drive of an old company computer with DBAN so I can install Redhat Enterprise and learn Linux (it's a Dell Inspiron 1210, if that matters). I burnt DBAN to a CD and boot from that CD (running on an external USB CD drive). Whenever I try to run the utility--whether it's Autonuke, or any of manual wiping methods-- it spits on the errors: ERROR /dev/sdb ERROR /dev/sda From what I've read on some other forums, there are some issues with other drives or removable media interfering however I've disabled all other drives in bios, leaving just CD/DVD and the Hard Disk but still no luck. Any advice on how I can reconcile these errors and wipe the disk?

  Read the article

• Will using two different tracking codes affect my SERP

  - by Danny Hefer

  Hello everyone and thanks for your time! I am now facing a problem after a site migration. New site is basically an improved version of old site, with the same content and some extras. After pointing the domain name to the new site, the old site was still online for a while but didn't get any traffic. The new site has its own tracking code. So, old tracking code has age (something like 7 years) but no visitors for a month, but new tracking code is a month old with an acceptable traffic. How to you think google will react if I add old tracking code to new site? Thanks by advance!

  Read the article

• Remote desktop session ends abruptly with a "protocol error"

  - by Jon

  Intermittently we get a problem where a remote desktop session will get disconnected with the error message “Because of a protocol error, this session will be disconnected. Please try connecting to the remote computer again.” We are getting this with one server only which is running Windows Server 2008, connecting with Windows 7 clients. The session itself stays running, you just get disconnected, and you can try and reconnect. Sometimes you get in for a while then it will kick you out. We are connecting from Windows 7 clients. We have tried connecting using Cord on a Mac and this works fine, so it's not like the session itself is corrupted. One problem is that there are some critical applications running under the session (I know, let's not discuss the idiocy of that), so we cannot reset the session in any way during the working day – so any diagnostics must have minimum impact. Thanks, Jon

  Read the article

• To Fix HTTP 400-499 error codes with 301 redirects in .htaccess file

  - by user2131844

  Google previously indexed my websites pages (sitemap.xml) with below format: www.domain.com/2013/04/18/hot?test-gadgets-of-2013-to-include-in-?your-list www.domain.com/2013/02/09/rin?gdroid I have resubmitted the sitemap but there are still 404 errors in Google/Bing engine. Could you please help me to write 301 redirects rule in .htaccess file so when some clicks the URL for: www.domain.com/2013/02/09/rin?gdroid They should be redirected to: www.domain.com/rin?gdroid How we can write rule in .htaccess file to remove date part 2013/02/09/?

  Read the article

• HD read error while booting linux

  - by sidharth sharma

  I have been dual booting windows 7 and ubuntu on my laptop since the past 3 years and all was working fine until I started getting logs like ata1.00: status: { DRDY ERR } ata1.00: error: { UNC } ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense key: Medium Error [Current][discreptor] I figured it was a hardware problem and ignored it as long as I could until the HD crashed on me. Then I got a brand new HD and put on windows and ubuntu afresh on it but the problem still persists. Any Help?

  Read the article

• In Windows Vista, when starting any and every program, a "bad image" error is generated

  - by Mark Hatton

  I have a problem where any program is started under Windows Vista, the following error message is generated Bad Image C;\PROGRA~1\Google\GOOGLE~3\GOEC62~1.DLL is either not designed to run on Windows or it contains an error.Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. This happens for every program started, including those that start automatically at boot time. My Google-fu is failing to solve this for me. I have already tried an "sfc /scannow" which did find some problems, but it said that it could not correct them. What might cause this problem? How might it be resolved?

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >