Search Results

Search found 1862 results on 75 pages for 'matt malesky'.

Page 18/75 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• Multiple vlans access to shared pbx system

  - by Matt

  I'm new to networking and was looking for some assistance. First off I'm using packet tracer to diagram my scenario as I will be receiving my equipment next week to deploy. Hardware to be used: 2 catalyst 3560 switches all connect to a sonic wall router I have two companies that work in the same office space. I need to keep these companies separate on their own vlan. They will however need to share the phone system. (Packet tracer file uploaded to give those who have the time to see what I put together.) http://dl.dropbox.com/u/86234623/network%20build.pkt Here is my current test scenario: on switch 0 I have: company A on vlan 2 computers 172.16.1.100 and 101 255.255.0.0 FA0/10 FA0/11 company B on vlan 3 computers 172.16.2.102, 255.255.0.0 FA0/12 PBX on a trunk port 172.16.0.5, 255.255.0.0 FA0/5 trunk port on FA0/1 to connect the switches on switch 1 I have: company A on vlan 2 computers 172.16.1.102, 255.255.0.0 company B on vlan 3 computers 172.16.2.100 and 101, 255.255.0.0 trunk port on FA0/1 to connect the switches I can ping the respective computers on the same vlan but cant ping company A to B which is what I want. However neither company can talk (ping) the PBX. Here are the commands I used to configure what I have: switch 0 en conf t vlan 2 name A vlan 3 name B int fa0/10 switchport mode access switchport access vlan 2 int fa0/11 switchport mode access switchport access vlan 2 int fa0/12 switchport mode access switchport access vlan 3 int fa0/5 switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 1-3 int fa0/1 (to connect the switches) switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 1-3 Switch 1 en conf t vlan 2 name A vlan 3 name B int fa0/10 switchport mode access switchport access vlan 3 int fa0/11 switchport mode access switchport access vlan 3 int fa0/12 switchport mode access switchport access vlan 2 int fa0/1 (to connect the switches) switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 1-3

  Read the article

• How could two processes bind onto the same port?

  - by Matt Ball

  I just ran into an issue where a request made to localhost:8080 from curl was hitting a different server than the same request made from inside Node. lsof -i :8080 revealed that two processes were both binding onto the same port: COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME node 51961 mball 14u IPv4 0xd980e0df7f175e13 0t0 TCP *:http-alt (LISTEN) java 62704 mball 320u IPv6 0xd980e0df7fe08643 0t0 TCP *:http-alt (LISTEN) How is this possible? Were they binding onto different interfaces? Or was it the IPv4 vs 6? If you're curious, node was hitting the other node process, curl was hitting the java process. The java process was started after the node process.

  Read the article

• Understanding vhosts settings

  - by Matt

  Ok so i have a server and I want to put a few applications on and i am having vhost configuration problems. Here is what i have and I want some direction on what i am doing wrong...ok so the first file is /etc/apache2/ports.conf NameVirtualHost 184.106.111.142:80 Listen 80 <IfModule mod_ssl.c> Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> then i have /etc/apache2/sites-available/somesite.com <VirtualHost 184.106.111.142:80> ServerAdmin [email protected] ServerName somesite.com ServerAlias www.somesite.com DocumentRoot /srv/www/somesite.com/ ErrorLog /srv/www/somesite.com/logs/error.log CustomLog /srv/www/somesite.com/logs/access.log combined <Directory "/srv/www/somesite.com/"> AllowOverride all Options -MultiViews </Directory> </VirtualHost> when i visit somesite.com everything works great but when i add another vhost and lets say thats named anothersite.com. So i have /etc/apache2/sites-available/anothersite.com <VirtualHost 184.106.111.142:80> ServerAdmin [email protected] ServerName anothersite.com ServerAlias www.anothersite.com DocumentRoot /srv/www/anothersite.com/ ErrorLog /srv/www/anothersite.com/logs/error.log CustomLog /srv/www/anothersite.com/logs/access.log combined <Directory "/srv/www/anothersite.com/"> AllowOverride all Options -MultiViews </Directory> </VirtualHost> then i run the following commands >> sudo a2ensite anothersite.com Enabling site anothersite.com. Run '/etc/init.d/apache2 reload' to activate new configuration! >> /etc/init.d/apache2 reload * Reloading web server config apache2 ...done. but when i visit anothersite.com or somesite.com they are both down..What is going on with the vhosts. Could it be the NameVirtualHost declaration with the ip or something...maybe my understanding of vhost settings is not clear. What i dont understand is why do both site now all the sudden not work at all.I would highly appreciate the clarity By the way anothersite.com or somesite.com are the only things I changed to make it more readable

  Read the article

• How do I setup an FTP server on Windows 7?

  - by Matt Frear

  I'm having trouble getting an FTP server setup on Windows 7. I've added the service using Control Panel - Programs - Turn Windows features on and off. I can see the service has started in Control Panel - Services. But then when I fire up a Windows command-line window, cmd, I get Not connected., C:\Users\mattf>ftp localhost ftp> ls Not connected. ftp> open localhost ftp> ls Not connected. ftp> dir Not connected. ftp> quit C:\Users\mattf> And that's as far as I've got. I have no idea why this isn't working - could it be firewall settings?

  Read the article

• ActiveSync / Exchange 2007 password expiration buffer on device

  - by Matt Hamende

  I'm trying to determine if there is any buffer of time from the time a password expires in AD to the time that users would stop receiving email on their mobile devices our setup is Exchange 2007 ActiveSync DC's are Server 2008 R2 primarily Android shop, with maybe a few iOS devices I've heard some rumors of people still receiving email after their password expired / changed on the domain, just want to see if anyone else has ever heard of this. Did a bit more reading, read about Token Cache in IIS 7.0 and 15min lagtime, still would like to hear any thoughts about this.

  Read the article

• Alternatives to native LDAP

  - by Matt

  We've implemented an LDAP to NIS solution and have begun transitioning some systems to native LDAP binding for authentication and automount maps. Unfortunately we have a very mixed environment with more than 20 *nix environments. The setup for each variant is of course unique and has required various workarounds to get full functionality. We're now at the point where we're willing to revisit the solution and possibly migrate toward something like Likewise (http://www.likewise.org), but would like to know what others are using to solve this problem.

  Read the article

• Cannot access SMC8014WG-SI provided by TimeWarner/RoadRunner administrative interface...

  - by Matt Rogish

  I just received installation of RoadRunner internet/TV/Voice and I was given a wi-fi router from the TimeWarner folks. The model is a SMC SMC8014WG-SI. Unfortunately, the password it uses is WEP and that is, as we all know, completely insecure. The tech that was here didn't know how to change it to something like WPA2 w/TKIP, and I was on hold for 20 minutes with the TimeWarner folks before I gave up. My problem is that the default web interface (http://192.168.0.1) isn't responding. I can ping it, I can access the internet through it, but I can't get to the admin interface. I did a "hard reset" of the device but still no dice. My suspicion is that the wi-fi admin interface is disabled (a common setting) but the wired interface isn't working on either of my two laptops (I've tried two laptops with two different cables, no link light activated). Am I SOL? Did they lock this down so I can't do what I want to do? Worst-case is I just hook up my go-to WRT54G router to the other modem and leave this one turned off, but I'd rather use their hardware to avoid any "It's not our problem" in the future. Any thoughts? Thanks!!

  Read the article

• Very poor battery life on Lenovo ThinkPad W500 laptop

  - by Matt

  I have a new ThinkPad W500 laptop (w/ 9 cell battery) running Windows 7 RTM 64-bit. All drivers* and BIOS are the latest. Battery life appeared poor so I performed several tests under the following conditions: Battery starts with 100% charge Screen on minimum brightness Screen saver running Wifi n enabled and active "Normal" set of programs running including Outlook 2007, FeedDemon, TweetDeck and antivirus Laptop left untouched during tests Under the above conditions, I clocked under 2 hours of battery life across 3 tests (1:49, 1:52, 1:47). If I actually use the computer, we're looking at 1:30. Something is not right... The smoking gun here is that Lenovo hasn't officially released Windows 7 drivers for this laptop. I haven't tried with Vista or XP yet. What are others seeing? Update: For W500 owners w/ the 9 cell battery, what value do you see for "Full charge capacity" when on the Battery tab of the Power Manager utility? I see 81.87 Wh.

  Read the article

• email handling with inbox.py and nginx

  - by Matt Ball

  I have a Flask web application running behind gunicorn and Nginx. Nginx proxies any traffic to ivrhub.org to the correct flask app. I would very much like to use inbox.py to process some incoming email. Running inbox.py's example on my server and then sending an email to [email protected] does not work as I intended. The inbox.py server does not seem to receive anything but the email also does not bounce. I'm missing something conceptually -- is there a DNS setting I need to configure or something I need to adjust with Nginx?

  Read the article

• Apache mod_rewrite and mod_vhost_alias Virtual Hosts and %1

  - by Matt Wall

  I have put the main bits of my httpd.conf down below. I am using %1 to get the host field so I can dynamically add vhosts by just creating dns/folders. One problem is I need to reference this: HttpStreamingLiveEventPath "D:/FMSApps/%1" HttpStreamingContentPath "D:/FMSApps/%1" In Apache when I try say to do this: http://test.domain.com/hds-vod/myfile.mp4.f4m it sees the %1 in the logs, and fails. Apache gives me this: [error] mod_jithttp [403]: No access to D:/Content/%1/DefaultContent/eve.mp4 What I'm looking for is the D:/Content/%1/DefaultContent/eve.mp4 to become D:/Content/test/DefaultContent/eve.mp4 Anyone have any useful resources / hints etc. to help me? Meanwhile my Google searching continues...! Listen 80 ServerName main1.rtmphost.com AccessFileName .htaccess ServerSignature On UseCanonicalName Off HostnameLookups Off Timeout 120 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 15 RewriteLogLevel 0 RewriteLog logs/rewrite.log DocumentRoot D:/Content LoadModule vhost_alias_module modules/mod_vhost_alias.so VirtualDocumentRoot "D:/Content/%1" RewriteEngine On <Directory /> Options None AllowOverride None Order allow,deny Allow from all Satisfy all </Directory> <IfModule f4fhttp_module> <Location /vod> HttpStreamingEnabled true HttpStreamingContentPath "D:/FMSApps/%1" Options FollowSymLinks </Location> Redirect 301 /live/events/livepkgr/events /hds-live/livepkgr <Location /hds-live> HttpStreamingEnabled true HttpStreamingLiveEventPath "D:/FMSApps/%1" HttpStreamingContentPath "D:/FMSApps/%1" HttpStreamingF4MMaxAge 2 HttpStreamingBootstrapMaxAge 2 HttpStreamingFragMaxAge -1 Options FollowSymLinks </Location> </IfModule>

  Read the article

• What are the advantages and disadvantages of the various virtual machine image formats?

  - by Matt

  Xen and Virtualbox etc both support a range of different virtual machine image formats. These are: vmdk, vdi, qcow & qcow2, hdd & vhd. Without any bias toward a particular product, I'm wanting to know what are the advantages and disadvantages of the various formats both from a features perspective, robustness and speed? One piece of info I discovered in a forum post was this: "The major difference is that VDI uses relatively large blocks (1MB) when growing an image, and thus has less overhead for block pointers etc. but isn't ultimately space efficient in the sense that if a single byte is non-zero in such a 1MB block the entire space is used. VMDK in contrast uses 64K blocks, and thus has more management overhead and generally a bit less disk space consumption What offsets this is that VDI is more efficient when it comes to snapshots." You might be thinking, I want to know this because I want to know which format to choose? Not exactly, I'm developing some software which utilises these formats and want to support one or more of them. Simplicity, large disks and ease of development are my main drivers.

  Read the article

• New event log nowhere to be found after creating in PowerShell

  - by Mega Matt

  Through PowerShell, I am attempting to create a new event log and write a test entry to it, but it is not showing up the Event Viewer. This is the command I'm using to create a new event log: new-eventlog -logname TestLog -source TestLog And to write a new event to it: write-eventlog TestLog -source TestLog -eventid 12345 -message "Test message" After running the first command, there is no "TestLog" log in the event viewer anywhere, and I would expect it to show up in the Applications and Services Logs section. After running the second command, same result. However, I am seeing a registry key for the log at HKLM\SYSTEM\services\eventlog\TestLog. Just not seeing anything in the event viewer. So, 2 questions: When should I be seeing the event log? After it gets created or after I write the first event to it? And, more importantly, why am I not seeing it at all? I'm using Windows Server 2008R2, and am logged in and running the PS as an administrator. Thanks.

  Read the article

• What's the difference between keepalived and corosync, others?

  - by Matt

  I'm building a failover firewall for a server cluster and started looking at the various options. I'm more familiar with carp on freebsd, but need to use linux for this project. Searching google has produced several different projects, but no clear information about features they provide . CARP gave virtual interfaces that failover, I am not really clear on whether that's what corosync does, or is that what pacemaker does? On the other hand I did get manage to get keepalived working. However, I noted that corosync provides native support for infiniband. This would be useful for me. Perhaps someone could shed some light on the differences between: corosync keepalive pacemaker heartbeat Which product would be the best fit for router failover?

  Read the article

• Improving terminal server performance for a specfic app

  - by Matt

  We have a windows 2003 terminal server running 2X application load balancign that is hosting a client's application that is accessed by around 50 users. Each user has there own database. The database is a file based database. The application is developed under Delphi so I think the database may be BDE based. As you can imagine, there is probably quite a lot of disk i/o. Here are some of the perfmon settings. Logged in users (average) 20 - 25 CPU Utilization (average) 80 - 100% Disk Queue Length (average) 1.6 % Disk time (average) 111 Page faults/sec (average) 1400 The application takes on average about a minute to load up. As usual, the budget is tight. Is there basic windows performance tuning tips that people can recommend to improve things before we fork out on more RAM etc. Server is a 2.8GHz Xeon with 3GB of RAM.

  Read the article

• DHCP not responding from laptop or router, but works on directly plugged PC?

  - by Matt H

  I'm at my sister in law's place in Singapore. I'm not from Singapore but am here for a few months. She has some sort of cable modem made by motorolla (SB5101 Surfboard). I think it goes, through starhub or similar provider. Anyhow, her PC is directly attached by cable (not wireless) and she can access the internet. There is no wireless router connected to it. The PC is configured with DHCP and appears to be working. However, the moment I unplug her PC and plug in my laptop, it doesn't get an address. The interesting thing here is that I also see this toredo tunnel adaptor etc. I'm not familiar with what that is. It appears to be being assigned an IP v6 address and an IP v4 address. I thought perhaps it's my laptop, but also when I plug in my DDWRT based router, it also fails to get a DHCP assigned address on the WAN port. I can't also seem to connect into any web configuration on the motorolla modem either. Any ideas? what kind of setup is this? all I'd like to do is plug in my wireless router so I can roam around the house and also access the internet.

  Read the article

• Understanding what needs to be in place for a server to send outgoing email from a linux box

  - by Matt

  I am attempting to configure an openSuse 11.1 box to send outgoing email for a domain that the same server is hosting. I don't understand enough about smtp servers and the like to know what needs to be in place and working. The system already had Postfix installed, and I confirmed it was running via a > sudo /etc/init.d/postfix status I examined the Postfix config file in /etc/main.cf and configured a couple of items regarding the domain/host name and such, but left it largely default. I attempted to send an email from the command line with the following command: > echo "test 123" | mail -s "test subject" [email protected] Where differentdomain.com was not the same domain as the one best hosted on the server. However, the email never reaches the target account. Any suggestions? EDIT: In the postfix log, (/var/log/mail.info, there's nothing in .err) I see that postfix is trying to connect to what appears to be a different smtp server on our network, with a connection refused: connect to ourdomain.com.inbound15.mxlogic.net[our ip address]:25: Connection refused However, I can't figure out why it is 1) trying to connect to that server and 2) not just sending the messages itself... I mean, isn't postfix an smtp server? I did a grep -ri on ourdomain from /etc and see no configuration files anywhere telling it to do this. Why is it?

  Read the article

• Display stretches 4:3 ratios; Adds scrolling to other ratios

  - by Matt

  I have a dual monitor setup. Normally, they both display at 1680x1050. They have been setup this way for about a year. I'm using Windows XP Professional 2003 x64 SP2. Today, out of nowhere, one of the monitors kicked back to a lower resolution. I was not playing with any configuration at the time.. in fact all I had done was close a window (maybe a browser). But the thing is that the resolution is still preserved partially by the fact that the screen will scroll when you move the mouse. So it's like looking through a 1024x768 window into a 1680x1050 world. The monitor itself does not appear to be damaged, because I also have it connected to my netbook (via KVM) and higher resolutions work fine. I tried uninstalling/reinstalling the drivers to no avail. System restore doesn't help either. I'm unsure of the exact ATI card I'm using.. Device Manager lists it as "Radeon X300/X550/X1050". There is no Catalyst Control Center software installed. I tried to install it, but there doesn't seem to be a way to install it by itself ... it forces you to install another driver, which breaks both of my displays, forcing me to go into safe mode and run system restore again. Any ideas? Thanks EDIT: After playing around more, I discovered that the "scrolling" behavior is only present for aspect ratios that are not 4:3. For 4:3 ratios, it just stretches out to fit the wide screen. My monitor's native ratio is 16:9 .. what could be causing it to think it needs to scroll?

  Read the article

• PNP4Nagios, nagiosgraph, separate Cacti, or something else for Nagios trending.

  - by Matt

  I've been using Nagios for a while now and recently started using Cacti after being dissatisfied with the lack of scaling and lack of any GUI in MRTG. I'm interested in adding trending to my Nagios installation and wondered what was the best route to go. I've looked around a bit and have seen what's available, but there's not a lot of information around to differentiate them from each other. My Nagios install has about 250 hosts and 1100 service checks, but many of them are just simple network devices and there's only about 20 servers and 300 services associated with them. All servers but 2 are running Windows Server 2003. What are the main highlights of PNP4Nagios vs. nagiosgraph, or would I be better off using some sort of tool to convert the data to RRD form and just view it directly in Cacti? Is there a completely different direction I could go that would be even better? Please comment if you need any more information, I tend to be too wordy and tried to keep this question brief. Thanks!

  Read the article

• How to make 7-Zip faster

  - by Matt

  I normally use WinRAR over 7-Zip simply because it's faster and only a little less efficient with compression. I did a few tests on different filetypes and sizes comparing the 7-Zip and WinRAR default settings on their normal compression and their best compression, and in a lot of cases WinRAR was 50% faster and in some it was actually 100% faster. But, I do like FOSS more. So here are my questions: Is there a way to make 7-Zip speed up? I'd like it to at least be on par with WinRAR's speed Is there a way to make recovery segments in 7-Zip like you can in WinRAR? I didn't see any, but I guess it could be a command line thing. I tested WinRAR and 7-Zip using the latest stable version of each (4-dot-something with 7-Zip). Is the 9.x beta release noticeably faster at compression? I'm talking about faster at a comparable setting in WinRAR, not just lowering to bare minimum compression. If it matters, I use a quad core Intel i7 720 (1.6 GHz)/(2.8 GHz) with 4 GB DDR3 RAM, and the 64-bit version of 7-Zip, and dual-boot Debian x64 5.0.4 and Windows 7 Home.

  Read the article

• Limiting interface bandwidth with tc under Linux

  - by Matt

  I have a linux router which has a 10GBe interface on the outside and bonded Gigabit ethernet interfaces on the inside. We have currently budget for 2GBit/s. If we exceed that rate by more than 5% average for a month then we'll be charged for the whole 10Gbit/s capacity. Quite a step up in dollar terms. So, I want to limit this to 2GBit/s on 10GBe interface. TBF filter might be ideal, but this comment is of concern. On all platforms except for Alpha, it is able to shape up to 1mbit/s of normal traffic with ideal minimal burstiness, sending out data exactly at the configured rates. Should I be using TBF or some other filter to apply this rate to the interface and how would I do it. I don't understand the example given here: Traffic Control HOWTO In particular "Example 9. Creating a 256kbit/s TBF" tc qdisc add dev eth0 handle 1:0 root dsmark indices 1 default_index 0 tc qdisc add dev eth0 handle 2:0 parent 1:0 tbf burst 20480 limit 20480 mtu 1514 rate 32000bps How is the 256K bit/s rate calculated? In this example, 32000bps = 32k bytes per second. Since tc uses bps = bytes per second. I guess burst and limit come into play but how would you go about choosing sensible numbers to reach the desired rate? This is not a mistake. I tested this and it gave a rate close to 256K but not exactly that.

  Read the article

• Splitting Servers into Two Groups

  - by Matt Hanson

  At our organization, we're looking at implementing some sort of informal internal policy for server maintenance. What we're looking at doing is completing maintenance on our entire server pool every two months; each month we'll do half of the servers. What I'm trying to figure out is some way to split the servers into the two groups. Our naming convention isn't much to be desired (but getting better) so by name or number doesn't really work. I can easily take a list of all the servers and split them in two, but with new servers are being added constantly, and old ones retired, that list would be a headache to maintain. I'd like to look at any given server and know if it should have its maintenance done this month or next. For example, it would be nice to look at the serial number. If it started with an even number, then it gets maintenance done on even months and vice-versa. This example won't work though as a little over half of the servers are virtual. Any ideas?

  Read the article

• Networking Home Office

  - by Matt

  I'm in the process of building an office in my garden. It's about 25m away from my house. I'd like to run a wired network connection to the office. I'd rather not go down the powerline route, as speeds don't seem great, and I'm likely to want to be moving a lot of data around on the internal network. I have an electrician who is running armoured electrical cable to the office, and is providing conduit for me to run network cable. My questions are: 1) What type of cable to run 2) How I terminate/connect it at both ends I could get something like armoured cat6 utp solid core (like this: http://www.netstoredirect.com/cat6-cable/289166-external-armoured-cat6-utp-solid-cable-price-per-metre.html) which seems fairly robust, but then I have to terminate it. Additionally, where the cable enters my house, there is about another 15m to where my router is situated. I also read this artice: http://www.audioholics.com/audio-video-cables/bjc-cat-network-cable-quality-interview which scared me into realising I don't know what I'm doing!! particularly with termination. Or I could get an "cat6 external patch cable" (e.g http://www.netstoredirect.com/rj45-network-cables/239231-external-cat6-utp-ldpe-rj45-patch-leads.html) and run that in the conduit, and work out how to terminate it at the house end. At the office end I guess I can just plug it into a switch. Any help? Thanks

  Read the article

• Where are ethernet errors logged?

  - by Matt

  Munin is showing me a graph like this: During that spike, I was unable to access my server through the eth0 port (I could access it through my IPMI port). I'm trying to figure out what happened, but I can't seem to locate any log files for eth0. I don't see anything in /var/log/(kern|syslog|messages) that is out of the ordinary. And I don't see a log file specifically for eth0. Are there logs for eth0, and if so, where can I find them? I am running Ubuntu 10.04 LTS.

  Read the article

• How can I download a file directly to a web server?

  - by matt

  I'd like to download files directly to a hosted server, whether it's one I set up myself or a hosted service like Dropbox. For example, when I download a podcast, instead of downloading it to my computer then uploading it to the server, how can I have it download directly to the cloud. My interest here is reducing the traffic I'm using over a metered data plan on my laptop, so I don't want my computer acting as a physical intermediary caching the file. Ideally, there would be some way for me to have a download link and tell it to go directly to my server. How can I accomplish this? I realize that this question is potentially involving a "webapp" and it is potentially involving "server administration" and since my goal is to cut my computer out of the loop I can see people saying this is off-topic and should be on another site. My issue is this: I don't know if this is going to be a webapp solution or a server solution but I do know regardless I'm going to be using a computer to get it done and I am replacing a function that's currently done on my computer so I figured I'd ask it here. If I was wrong and this definitely should be at webapps feel free to let me know or just migrate it.

  Read the article

• Mysql install and remove issues

  - by Matt

  I installed mysql on ubuntu server and i dont know what went wrong...it didnt install a mysql root user so i tried to uninstall and start over and now i cant unistall i tried this apt-get remove php5-mysql apt-get remove mysql-server mysql-client apt-get autoremove but when i do ps aux | grep mysql root 6066 0.0 0.0 1772 540 pts/1 S 03:21 0:00 /bin/sh /usr/bin/mysqld_safe mysql 7065 0.0 0.6 58936 11900 pts/1 Sl 03:33 0:00 /usr/sbin/mysqld -- basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid -- socket=/var/run/mysqld/mysqld.sock --port=3306 root 7066 0.0 0.0 2956 688 pts/1 S 03:33 0:00 logger -t mysqld -p daemon.error root 22804 0.0 0.0 3056 780 pts/1 R+ 04:14 0:00 grep mysql so i killed the processes and then tried to reinstall like this apt-get -f install sudo apt-get install mysql-server mysql-client sudo mysqladmin -u root -h localhost password 'root' but i get this mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: NO)' im confused..i keep installing and uninstalling mysql and the same result..any ideas

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >