Search Results

Search found 1605 results on 65 pages for 'monitors'.

Page 18/65 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • How can I use two video cards to power three screens?

    - by notatoad
    I have two Radeon 6450 graphics cards in my computer, with three screens. Only the screens plugged into the first graphics card are recognized and configurable in the displays setting panel. How can I use the displays plugged into my second graphics card? Both cards are present in lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 01:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] 02:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 02:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] I'm using the open source driver instead of the proprietary driver because the proprietary driver won't output 1440x2560.

    Read the article

  • display port on x230 not working

    - by Aaron
    having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

    Read the article

  • Triple-display setup using AMD drivers

    - by Halik
    I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

    Read the article

  • How do I get one monitor on top of the other?

    - by Jan
    I'm using a laptop and a monitor (wall mounted) over my laptop. I would like to reflect this physical hardware setup in my software screen setup. So that I can move my mouse upward, out of my laptop screen and use the monitor on the wall. I have been searching for a solution for a while, and I hope somone can help me out. I'm using Ubuntu 10.10 "out of the box". Side by side screen setups works just fine, over/under is doesn't work.

    Read the article

  • Disabling monitor reconfiguration when closing lid

    - by Tomas
    I often need to move my laptop from one working place to another. When I do this, there are two events Ubuntu responds to by changing the monitor set up: Removing/attaching the VGA cable Closing/opening the lid of the laptop While removing the VGA cable gives me what I need (single screen, highest native resolution on the external screen if connected; otherwise highest resolution on the laptop), the laptop close/open lid response is not as good. Every time I close or open the lid, Ubuntu reconfigures the monitor set up. When I close the lid now... the screen goes black for a few seconds and it switches to clone, with my laptop screen disabled. Reopening results in... briefly a black screen, then the external monitor being used as desktop extension. Ubuntu thinks too much. My first and foremost question: Is there any way to let Ubuntu ignore lid close events? Ideally (or when there's no way to solve above question) I'd want to change how it deals with the screen reconfiguration. Why does Ubuntu toggle the screen configuration between external, clone and single display? Can't I just configure it to always use the external monitor, when present, in single screen mode? Note that similar questions have been asked before (most notably this one), but these have been closed perhaps wrongly. Any ideas are very welcome, I don't mind playing around a bit to see if something works.

    Read the article

  • Ubuntu Unity (64-bit) Bugs on Nvidia dual screen [closed]

    - by Kristofer
    On my work computer I have upgraded 10.04 to 10.10 and now to 11.04. Upgrades have mostly worked well and the dual screen setup is almost working. There are however a couple of annoying bugs which I tried to report but the bug reporting tool told me to ask about the bugs here. Here's what I have found: Auto-hide stops working. It doesn't seem to matter which application is maximised/covering the dock, it just stays on top. I have tested changing the autohide settings with no result. Scenario: One maximised window on each screen. If I now try to drag the window that doesn't have focus by dragging the top of the window nothing happens. I can also not give the window focus by clicking the top bar, I have to click inside the window and then I can drag the window. If I unmaximise the window with focus it does work and I can both change focus and drag the window directly by clicking the top of the maximised window. Any bug fixes coming for these issues? Any work-arounds?

    Read the article

  • Only one resolution available in Xorg.conf

    - by Kévin Guilbeault
    I recently upgraded to Ubuntu 12.10 and when I try to change my resolution in NVIDIA X server settings, I only get the native one (1600x900). When I had 12.04 installed, all resolutions were available in the drop down list. My goal is to have twinview working again. I used to set my two screens to twinview and clones, using my HDTV resolution (1360x768) which was previously available in 12.04 for my laptop screen too. In 12.10, I tried to install all of the NVIDIA drivers available except the nouveau driver. I tried to add a new mode using Xrandr --newmode / --addmode, but it didn't work; it coudn't detect my output. I'd like to know if this is a known bug and if there's something to do with that. Thanks!

    Read the article

  • Can T520+Bumblebee run an external monitor via DisplayPort?

    - by Fen
    Using 64-bit Ubuntu 11.10 and integrated (Intel) graphics, I can run the 1600x900 laptop display plus a 1600x1200 external monitor connected to the VGA adapter. But my external monitor is 1920x1200 so I have black stripes on each side. I believe the resolution is limited like this as the maximum resolution available from the Intel GPU is 2560x1600 = 4,096,000 pixels and I'm asking for a 3520x1200 = 4,224,000 display (with 1200x300 lost above the laptop screen). At 3200x1200 = 3,840,000 pixels, the Intel GPU seems happy. Under Windows, the same limit exists when using the VGA adapter, but if I turn Optimus on then I can connect the external monitor to the DisplayPort and get its full resolution and an extended desktop. I've seen that Bumblebee can run apps on the DisplayPort using the 'optirun' command. My question is: can Bumblebee run the DisplayPort in concert with the Intel card running the laptop screen creating a large virtual desktop (as on Windows)? If so, are there any pointers to how to do this? I tried once, failed, and dropped back to Integrated Graphics (and black stripes) as I could find no reports of this configuration working.

    Read the article

  • Crash on shutdown when using second monitor

    - by plua
    I have recently added a second monitor to my setup. Instead of one VGA monitor, I now have one VGA and one DVI monitor hooked up to the computer. The displays work just fine. However, ever since this monitor was added Ubuntu (10.10) does not shut down properly. I go to shutdown and it starts shutting down but just hangs and I need to manually shut it down. This has been like this for weeks and I feel not comfortable shutting it down this way over and over again. Has anybody any idea what this can be? Or, also useful, does anybody know how to get some info on why this crash occurs? Any logs that can be used for this? Thanks! Paul

    Read the article

  • Monitor flickering ATI

    - by Atzu
    I'm using ubuntu 12.10 on laptop samsung with randeon hd 6620g (APU A8), when I run amdcccle -version it says 2.18, not sure if that's the correct version. My problem is that I have and external monitor, AOC e2343Fsk and when I finally got it working at the resolution I want 1920x1080 it works fine for like 5minutes and then it starts flickering... I solved this on Windows (the exact same problem) with some options (I don't remember very well) I believe there were some buttons '+' and '-' on some vsync option I played with them on windows and Yay! got it working, but I don't see anything similar on this catalyst version (I used xorg-edgers ppa for installing fglrx). Thanks.

    Read the article

  • Why is my Workspace switcher view skewed

    - by Lee
    I have been using Workspace switcher in Ubuntu just fine but recently have encountered this problem. The windows in the switcher don't fill the screen. I must have pressed some combination of buttons somehow but can't find any information anywhere in regards to resizing them. As you can see in the screen shot it looks like a perspective view or something. http://i1115.photobucket.com/albums/k553/lmt337/Screenshotfrom2012-07-04103519.png I should also add I have a dual monitor setup and nvidia graphics. The switcher still works but the fact the screens dont fit my actual screens is driving me nuts. Thanks in advance for any help.

    Read the article

  • How do I get HDMI output working on a Dell XPS 15 L502x?

    - by Jones
    Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

    Read the article

  • Sudden crash with gnome and unity

    - by cent89
    I've a Toshiba Satellite Pro U400 with Ubuntu 11.10. Very often when I'm working on the pc reboots itself, or close all programs and return to the login screen. This is very annoying, often I lose my job I'm doing, sometimes I make bad figures while projecting slides or movies in public. What happens is that with Unity 3 with Gnome, so I do not depend on these. I also checked the log files but with little success because I can not interpret them the best. Can you help me solve this serious problem? thanks. Roberto

    Read the article

  • Can't login to Unity 3d after enabling Xinerama for a short moment

    - by Amir Adar
    Today I connected a second monitor to my computer. I set it up using nVidia's control panel, and all was working quite well, so I figured it won't be a problem to try Xinerama, just to see the difference between that and twinview. After enabling Xinerama and restarting the X session, I saw that I was logged into a Unity 2d session. I thought it was a problem with Xinerama, so I switched back to twinview, but it still logged me into Unity 2d. I tried disconnecting the second monitor, no luck: still Unity 2d. I tried changing GPU drivers and installing drivers from a separate ppa, and still I was logged into Unity 2d. Up until this point, I didn't have any problem logging into Unity 3d. It only happened after I tried using Xinerama. I should note that I was doing all this while updates were going on in the background, so it could be something related to that, though I can't imagine what (I tried booting with another kernel, but no luck). So what exactly happened? Did changing the mode to Xinerama triggered some other changes that I'm not aware of? Did these updates cause a certain malfunction in the driver? Is it something else?

    Read the article

  • Using onboard and pci-e graphics card at the same time

    - by Endle
    Hello wonderful people. I know there are several other posts with similar questions. I also know how to use Google. I also have read up on posts discussing bumblebee, crossfire, ati catylist and many other interesting topics. I would just like someone to give me advice on how to use the onboard and pci-e graphics at the same time. I know the computer is capable of doing this. It works in Windows. I can use the VGA and DVI onboard port and the HDMI port of the add on card all at the same time. Works great in Windows 7, In Ubuntu, it seems only one or the other will work. I can use any combination of two displays on either adapter: VGA and HDMI..HDMI and DVI..so forth and so on. I have started experimenting with xorg.conf files, but have not been able to get any of them to work. Here is my last attempt at writing an xorg.conf file: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" Screen 2 "Screen2" LeftOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Device" Identifier "Onboard Video" Driver "radeon" BusID "PCI:01:05.0" EndSection Section "Device" Identifier "Graphics Card" Driver "radeon" BusID "PCI:02:00.0" EndSection Section "Monitor" Identifier "CRT2" Option "VendorName" "ViewSonic" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DVI1" VendorName "ACR" ModelName "P224W" Option "DPMS" EndSection Section "Monitor" Identifier "DVI2" Option "VendorName" "Acer" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "Screen0" Device "Onboard Video" Monitor "CRT2" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Graphics Card" Monitor "DVI1" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection

    Read the article

  • display port on x230 not workgin

    - by Aaron
    having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

    Read the article

  • I'd like my window switcher to be per-monitor. How do I do that?

    - by Erigami
    I have a multi-monitor setup with nVidia drivers, running Unity/Compiz on 12.10. I'd like to treat each monitor separately, so I can switch desktops on one without affecting the other and run a window switcher that only switches between windows on the current monitor. How do I do that? None of the switchers listed in ccsm seem to limit themselves to the currently focused monitor, ditto for desktop switchers.

    Read the article

  • Dual displays not working with Xinerama in Ubuntu 12.04

    - by user68489
    I just upgraded from Ubuntu 10.10 to 12.04. I had been using a display configuration just like the one described at http://bitkickers.blogspot.com/2009/08/rotate-just-one-monitor-with.html without any problems under 10.10. I have an nvidia Quadro FX 380 and have upgraded to the latest drivers (295.49). Everything appears to be fine when the system first boots up. However, after logging in, the left screen goes black, and the right screen displays what should be displayed on the left screen. Logging into Ubuntu 2D somewhat improves things. The left screen correctly displays the left portion of the desktop but the right screen contains a duplicate view of the left screen. Turning off Xinerama and enabling TwinView appears to fix the issues but does not allow the right monitor to be rotated. Since the display problems start to occur only after logging on, I thought it might have to do with carryover user configuration from 10.10 but the problems persist even when logging in as a guest. Clicking on System Settings - Displays results in the error message "Could not get screen information - RANDR extension is not present." Any help would be greatly appreciated.

    Read the article

  • How do I turn off the laptop screen while using an external monitor?

    - by jpmelos
    When I close my laptop lid, all my screens are turned off (my laptop screen and my LG M237WA monitor). I'd like to know how do I make it turn off only the laptop screen and keep the monitor on (I want that behaviour for when I want to watch a movie on my monitor and don't want any brightness coming for the laptop screen). I'm using a HP Pavilion dv4-1290br, which comes with a nVidia GeForce 8400M GTS. I'm using the nVidia driver and it's working perfectly. For my X settings, I'm using TwinView, my laptop is set to 1280x800 and my monitor to 1920x1080. I hope you guys can help me, for I couldn't find anything so far. Thank you very much.

    Read the article

  • Dual monitor Unity launcher opening on wrong monitor in 11.10

    - by user26381
    I just upgraded to Oneiric and now the Unity Dash launcher is on my left screen. I really want it on my right screen. But how do I do that? Why do I want the Dash on my right screen? My left screen is a smaller older monitor that I use to read/watch documentation or keep my music player open. I work on my right screen, that is bigger and is a better monitor. I have an Nvidia card and in the nvidia settings it is setup that the right monitor is my primary monitor, but Oneiric doesn't follow this setting anymore. I thought this was a bug, but is seems to be intended behavior... https://bugs.launchpad.net/ubuntu/+source/unity/+bug/742544 Some poster in this thread explains that he "patched it locally", but I have no idea how to do this. Does somebody know how to do this? Or maybe there is another solution?

    Read the article

  • How can I stop the panel from showing on an external projector/monitor?

    - by hellocatfood
    In Ubuntu 10.10 (and possibly previous versions), when I connected my laptop to an external source (monitor/projector) and set it not to clone my desktop the display on the external source would not show the (gnome-)panel (just a full-screen desktop with no icons). Since upgrading to Ubuntu 11.04 (using Unity) when I now connect the external source has the panel on there. Is there any way to revert to the previous behaviour in 11.04?

    Read the article

  • Dual-Monitor layout and primary display with Nvidia in Gnome-Shell

    - by java4fun
    I have installed Ubuntu 14.04.1 with gnome-shell version 3.10.4. I can attach a second monitor to my laptop and it is recognized. If I configure it with the nvidia-settings at the right of my laptop then all works fine (the extention of the display works as an extention on the right, not dual). Now what I want is to have the second monitor configured over the laptop-display. When I'm not using gnome-shell, it works correct (I can drag an application from the bottom display to the top normally) but with gnome-shell I have to press Ctrl+Shift+ mouse help, and resize properly the application size. This is for me an enforcing. Is there a way to make that gnome-shell work properly with a bottom/top monitor?

    Read the article

  • External HDMI poor quality

    - by paschoal
    When pluging an external HDMI display, it get detected and everything was supposed to be working right out of the box, except that when set the resolution to 1920x1080, the display on HDMI is really poor quality. Playing around with xrandr, when setting resolution at 1680x1050 or below, everything is smooth, when setting 1920x1080 or 1920x1080i, with wide variety of refresh rates, it's the same poor quality display. Unfortunely I can't post an image showing the exactly issue (low reputation). Specifications: Dell Inspiron 14 (Intel HD Graphics) Samsung TA550

    Read the article

  • ubuntu 13.10 secondary monitor - doesn't redraw properly

    - by Daniel
    Hi I've just installed Ubuntu 13.10 on a Lenovo w350 and am having some issues with graphics driver. standard nouveau drivers work great on the laptop display but when I attach an external display it goes bad on the external monitor, seems it's not re-drawing properly. (Photo attached). I've tried other drivers but none of them detect the external monitor when connected. Any ideas? 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1) screenshot of effected monitor -- http://i.imgur.com/UZWMpQO.jpg UPDATE 1: I have noticed that if I leave the System Monitor open the display improves. Wierd. UPDATE 2: If I leave a video going the lag/flicker issues stop.

    Read the article

  • Dual Screens not working nVidia

    - by user91396
    So I'm very much an Ubuntu noob, in fact I just install Ubuntu to my P.C. and I started it up with both my screens plugged into my nVidia's dvi and vga ports and logged in, change the skin to classic gnome, because that's how it was when I last used Ubuntu (8.1), and both screens were working separately. The trouble is that I got a notification saying there was nVidia drivers to be installed, so I install them and restart my P.C., as it told me to, and when I get back on only one of my screens is working and when I go into Displays (All Settings, Displays) it doesn't register my other screen at all, and it calls my working screen "Laptop". I've tried looking through several pages of Google but I see no answer. I did try to find the nvidia-settings to see if that had the answers but sadly I couldn't locate it. Thanks in advance for any help, but please remember, I am very new to Ubuntu.

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >