Search Results

Search found 1605 results on 65 pages for 'monitors'.

Page 20/65 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Dual External Monitors Through Docking Station on ASUS G73JW-XT1

  - by user60695

  I am getting an ASUS G73JW-XT1; and I would like to set it up so that I can plug it into a docking station at my desk, and use 2 external monitors (not the laptop display and an additional monitor). The computer supports a DVI and HDMI output, but I cannot find any docking stations that will support two external displays, as well as audio ports and USB ports for other peripherals. Does anybody know of a specific docking station that will do this, or another workaround without having to plug in several things to my laptop every time I bring it to my desk?

  Read the article

• Ubuntu 10.04 not detecting multiple monitors

  - by razass

  I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks.

  Read the article

• Ubuntu dual monitor set up - taskbars appear on other monitor

  - by DisgruntledGoat

  I'm trying to get my TV (connected via HDMI cable) to act as a second monitor to watch video etc. The TV is to my left, so in Display Preferences I unticked "Mirror Screens" and put the monitors like this: -------- ---------- | PC | | TV | | | ---------- -------- When I do this, the PC monitor comes up with just the desktop wallpaper and the interface - taskbar and windows, etc - moves to the TV screen. But if I swap the monitors around, the taskbars are still on the TV screen, with the windows (and desktop icons) on the PC screen. Is there a way to set the computer monitor as the main one and the TV as the second screen? PC: Dell Inspiron 531 Monitor: Samsung SyncMaster 720N TV: Philips 26PFL5522D LCD TV

  Read the article

• Dell PR03X port replicator and DisplayPort to DVI adapter not detecting second monitor

  - by yothenberg

  I have a Dell M4400 connected to a PR03X port replicator/docking station. I use the DVI port to connect it to a first Dell 2208WFP monitor and I'm trying to use a DisplayPort-to-DVI adapter to connect it to a second Dell 2208WFP monitor. The second monitor, connected via the DisplayPort-to-DVI adapter immediately goes into sleep mode and the laptop doesn't detect it. What is really weird is that it did detect it the first time I plugged it in but after I unplugged the monitor and plugged it back in it stopped working. I swapped the monitors round and it detected them both but after unplugging the monitor connected via the DisplayPort-to-DVI and plugging it in again it stopped working. Both monitors work if plugged in directly to the DVI port. Is there some way to force re-detection? Any ideas?

  Read the article

• setting up multi-mon windows + mac

  - by psychotik

  Ok this is a stretch, but I know of some Windows only software that does this so curious if there is something that does it on the mac too. I have 2 monitors and 2 development machines - a PC and a Mac Mini. I want to be able to view/control both concurrently (one on each monitor). The Mac only has DVI out, the PC has both and my monitors have both. Any suggestions on how I can do it? A solution involving KVM or software (VNC/remoting) is OK... Thanks!

  Read the article

• Can I get 4 screens running on an ATI Radeon HD 5700 series video card?

  - by Wayne

  I have successfully run 3 displays using the 5700, but i want to run a 4th screen off the HDMI Port. Mainly I would like it to Mirror the primary monitor onto the TV connected to the HDMI Port. Any help at all would be greatly appreciated. I can get a signal to it, i just have to disable one of my original 3 monitors. Im not willing to do that. So other than disabling one of my monitors, does anyone have any suggestions?

  Read the article

• Ubuntu Lucid: Erratic screen behaviour after boot

  - by fgysin

  In short: about 50% of the time I have a screwed up monitor setup after reboot. About 50% it is totally correct. Now the longer version: I updated my machine from 9.04 to 10.04 (via 9.10). At first I run into some monitor problems (I have a 3-monitor setup) because of the known bug in the new xserver driver for xinerama. This messes up behaviour if the mouse goes either left or above the screen number 0, i.e. I had to make my left-most monitor screen 0. Everything worked out fine finally, I got my 3-monitor setup back with xinerama enabled to get one big desktop streched over 3 screens. Now the fun part: Every time I start up my machine only one of the 3 monitors gets a signal and is woken up: it only recognizes the left-most monitor (screen 0) and crams all the desktop stuff into this one screen. If I go into nvidia settings I only see one physical device although all 3 are connected and have power. When I look into the xorg.conf I can still see my old setup with 3 devices, 3 screens, xinerama active etc... But I was totally unable to get 3 montitors to work. (I tried unplugging monitors, reconfiguring whole nvidia setup, ...) But it gets even better: When I restart my machine (i.e. choose the restart option from the Ubuntu menu) it shuts down and tries to restart. The restart then gets stuck after showing the Ubuntu splash screen with the 'loading bar' (the moving dots thingy) and I am forced to kill the machine by cutting power. But after the power cut the machine boots up normally and suddenly I get my 3 monitor setup back up working. That is until the next time I shut down and start up, where it all starts over again and I only have one monitor... (see above) I really have a hard time seeing where the error is. It must be that the restart boot somehow differs from the 'normal' boot. But the fact that it gets stuck and I need to cut power which then basically triggers a 'normal' boot does not really support this theory... My setup (please tell me if you need further info): 3 monitors as 3 screens as one desktop (with xinerama) 2 nvidia cards where screen 0 and 1 are on card 0 and screen 2 is on card 1 Ubuntu 10.04 Lucid Lynx (updated from 9.10, 9.04, ....) I would appreciate every idea on the subject, at the moment I really don't have any clue what to do...

  Read the article

• Multi-monitor setup: one widescreen monitor, one regular (4:3) monitor; is this usually possible?

  - by stakx

  I'm trying to find out whether it's generally possible to have a multi-monitor setup with both a widescreen monitor and a regular monitor (ie. one with a 4:3 picture ratio). I'd like to run them in Extended Desktop mode on a Windows Vista machine. The computer is a Dell notebook with an onboard Intel GMA 4500MHD graphics chipset. While I know that this notebook is capable of driving multiple monitors, I don't know if it is also able to drive monitors with varying resolutions. Does anyone know if differing screen resolutions is generally a problem?

  Read the article

• Dell PR03X port replicator and DisplayPort to DVI adapter not detecting second monitor

  - by yothenberg

  Hi, I have a dell M4400 connected to a PR03X port replicator/docking station. I use the DVI port to connect it to a first Dell 2208WFP monitor and I'm trying to use a DisplayPort-to-DVI adapter to connect it to a second Dell 2208WFP monitor. The second monitor, connected via the DisplayPort-to-DVI adapter immediately goes into sleep mode and the laptop doesn't detect it. What is really weird is that it did detect it the first time I plugged it in but after I unplugged the monitor and plugged it back in it stopped working. I swapped the monitors round and it detected them both but after unplugging the monitor connected via the DisplayPort-to-DVI and plugging it in again it stopped working. Both monitors work if plugged in directly to the DVI port. Is there some way to force re-detection? Any ideas? Thanks, Mark

  Read the article

• Can Acer Aspire Revo (Atom 330) be used with two monitor dispaly?

  - by LeeD

  I'm so attracted to Acer Revo for the price & the look. As long as I can work on two monitors simultaneously, I'll be happy. Not planning to do heavy video editing or gaming. Occasional movie streaming would be fine. Will mainly use it to do trading, lots of word processing, some photo editing, connecting with friends. Anyone has experience using Revo with 2 or more monitors? The spec says it has VGA and HDMI output but Acer sales person over the phone told me it can support one monitor only..??

  Read the article

• Multi Monitor setup goes crazy after locking/unlocking Vista machine

  - by Farseeker

  Give me a 10-blade quad-processor quad-core Opteron centre and ask me to configure failover/load balancing and I'd be happy to, but the following problem has got me completely stumped. My Vista Business Professional machine, running Ultramon, has three monitors attached. When I lock the machine (to go to the delicious cafe around the corner), the monitor layout stays correct. When I unlock it, I watch as all my screens flicker (as they are being re-configured), and Vista chooses some crazy layout for the monitors. The most recent one is below, but it's never consistant. Any ideas what might cause this? It's Vista Business, with UltraMon 3.0 (exiting Ultramon makes no difference).

  Read the article

• emulate fake monitor on windows 7?

  - by Claudiu

  Is there any way to emulate a monitor on Windows 7? I have one physical monitor, and I want Windows to think I have two. I actually don't care whether the second monitor is visible anywhere, or if I can see it - everything rendered there may as well go to the equivalent of /dev/null - but I need Windows to think there is one there. The reason is that I want to run a virtual machine with two monitors with VirtualBox in seamless mode, and it doesn't let me go to seamless mode if there are more virtual monitors than physical ones. I don't need to see the second virtual monitor, but VirtualBox won't just stop displaying it like it did in earlier versions.

  Read the article

• Windows 7 resizes desktop when I switch of a monitor

  - by Stijn Sanders

  I have a workstation with two monitors and the desktop extended over them. I have a lot of applications open (generally maximized), and I have a personal preference which application is on which monitor (let's say editors on the right, data retrieval and display on the left). I have recently upgraded to a workstation with Windows 7 and when I power off a monitor (typically when going home at the end of the day), the desktop-expand-over-monitors disables and all applications are switched to the main monitor. (Also the taskbar I keep on the left resizes to about one icon's width.) This is highly annoying, since I now spend the first minutes of work each day switching the applications back that were on the monitor on the right. Is there a way to prevent this? (It says no here.) Is there software I could install that can prevent this?

  Read the article

• Ubuntu Lucid: Erratic screen behaviour after boot

  - by fgysin

  In short: about 50% of the time I have a screwed up monitor setup after reboot. About 50% it is totally correct. Now the longer version: I updated my machine from 9.04 to 10.04 (via 9.10). At first I run into some monitor problems (I have a 3-monitor setup) because of the known bug in the new xserver driver for xinerama. This messes up behaviour if the mouse goes either left or above the screen number 0, i.e. I had to make my left-most monitor screen 0. Everything worked out fine finally, I got my 3-monitor setup back with xinerama enabled to get one big desktop streched over 3 screens. Now the fun part: Every time I start up my machine only one of the 3 monitors gets a signal and is woken up: it only recognizes the left-most monitor (screen 0) and crams all the desktop stuff into this one screen. If I go into nvidia settings I only see one physical device although all 3 are connected and have power. When I look into the xorg.conf I can still see my old setup with 3 devices, 3 screens, xinerama active etc... But I was totally unable to get 3 montitors to work. (I tried unplugging monitors, reconfiguring whole nvidia setup, ...) But it gets even better: When I restart my machine (i.e. choose the restart option from the Ubuntu menu) it shuts down and tries to restart. The restart then gets stuck after showing the Ubuntu splash screen with the 'loading bar' (the moving dots thingy) and I am forced to kill the machine by cutting power. But after the power cut the machine boots up normally and suddenly I get my 3 monitor setup back up working. That is until the next time I shut down and start up, where it all starts over again and I only have one monitor... (see above) I really have a hard time seeing where the error is. It must be that the restart boot somehow differs from the 'normal' boot. But the fact that it gets stuck and I need to cut power which then basically triggers a 'normal' boot does not really support this theory... My setup (please tell me if you need further info): 3 monitors as 3 screens as one desktop (with xinerama) 2 nvidia cards where screen 0 and 1 are on card 0 and screen 2 is on card 1 Ubuntu 10.04 Lucid Lynx (updated from 9.10, 9.04, ....) I would appreciate every idea on the subject, at the moment I really don't have any clue what to do...

  Read the article

• Radeon 4670 Card Has 2 DVI Outs But Only Works When One is used in Win7 x64

  - by ssmith

  I have an ATI XFX Radeon 4670 1GB video card in a Windows 7 Ultimate x64 setup. If I only use one monitor, all is well. If I plug in a second DVI cable to the card, both monitors go dark. I can get one or the other to display, but only when it is the only one plugged into the card. I'm really hoping for a dual-monitor setup here as that was the point of the card. I'm using ATI Radeon HD 4600 Series video drivers dated 11/24/09 (8.681.0.0) which are the latest from their site and are supposed to work with Vista or Win7 x64. When the computer boots with both displays connected, both monitors display the inital bios and boot screens. The Win7 splash screen also displays, but by the time it goes to the login screen, one monitor is offline.

  Read the article

• Switch monitor configurations on Windows 7

  - by Horst Walter

  I use one of my PCs for flight simulation as well as for home theater. In case one it has 2 monitors attached, and in case 2 (home theater) a HD TV is being used. All 3 monitors are attached at the same time to the graphics card. How could it best switch best between different configurations. In case 1 I'd like to have the configuration with monitor 1/2, alternatively I'd like quickly to switch to another config only with the HD TV as primary screen. A similar question has been asked 6 months back with no full solution yet, so I come up with it again. The comment there of Darius (Windows + P key) is the best so far.

  Read the article

• Why are applications slowing down on the computer's second monitor?

  - by ChristianLinnell

  Here's an interesting one. Problem I have a user on Windows XP who is running a web application inside IE8. She has two monitors plugged in via DVI cables. When she is working the the browser on her primary monitor, everything is fine, but when she drags the window over to the second monitor, the web applications functionality grinds to a halt. It's not just web apps either - many applications exhibit the problem. What I've tried Switching the two monitors in the OS. It's obviously not the monitor's fault. Confirmed that it's the app slowing down, and not the graphical rendering. The application in question actually locks up. The mouse is unaffected, and I can drag other windows on top of the problematic application. Any ideas?

  Read the article

• DVI to VGA adapter only working in one output

  - by Tom Jenkinson

  I have a AMD Radeon HD 6800 Series graphics card which has 2 DVI outputs. I tried to set it up with 2 monitors which both have vga connectors on the end and used 2 dvi to vga adapters like these. http://www.tvcables.co.uk/images/items/vga-to-dvi.jpg For some reason nothing would reach the monitor, it would remain in standby, if it was plugged into the second output. I tried all the different combinations of cables, adapters and the 2 monitors but whichever monitor that was plugged into the second output wouldn't work. I then randomly decided to plug a different monitor into the second output which has a dvi connector on the end so there was no need for an adapter and plugged it in and it worked! Does anyone know why the second output on the graphics card won't work with a dvi to vga adapter (and the first output will)? I'm really confused! Thanks

  Read the article

• Do you know of any ways to effectively manage a triple screen setup brightness?

  - by nizm0

  I use a desktop with multiple monitors I have tried F.lux and it is a great app for changing the color from 3500k-6500k... but doesn't adjust screen brightness. (I recommend you try it) I've googled for hours trying to find an app that will work to let me easily manage screen brightness either by a "dim when idle" or a dynamically updating screen brightness based on the time of day. Windows 7 desktop doesn't seem to have options for me to adjust brightness on the system, and manually changing three separate monitors is too much of a chore? Anybody have some recommendations? Perhaps a way to script this, knowledge of how to use the supposed dynamic screen brightness functions that Windows was supposed to add in Windows 7?

  Read the article

• DVI-D Splitter Not Working with GeForce 8400gs

  - by jimdrang

  I have a GeForce 8400gs and it has a DVI and VGA port on the back. I was using dual monitors with one VGA and one DVI cable. I wanted both displays to be digital so I bought a DVI-D splitter and put one DVI cable in each monitor, connected them to the splitter and put the single merged connection in the back of the cards DVI connection. It will not recognize the second monitor (I'm not even sure how it determined which one was the first monitor). The tech specs state that it supports "Two dual-link DVI outputs for digital flat panel display resolutions up to 2560x1600" http://www.nvidia.com/object/geforce_8400_tech_specs.html. Do I need a different converter or is my only option for dual monitors with this card one VGA, one DVI?

  Read the article

• Can I get 4 screens running on an ATI Radeon HD 5700 series video card?

  - by Wayne

  I have successfully run 3 displays using the 5700, but i want to run a 4th screen off the HDMI Port. Mainly I would like it to Mirror the primary monitor onto the TV connected to the HDMI Port. Any help at all would be greatly appreciated. I can get a signal to it, i just have to disable one of my original 3 monitors. Im not willing to do that. So other than disabling one of my monitors, does anyone have any suggestions?

  Read the article

• Second monitor sometimes will not wake up

  - by peacedog

  My workstation has two monitors and Windows 7 (64bit). Sometimes when I lock my computer and later return and unlock it, the second monitor won't wake up. I have to turn that monitor off and on to get the picture back. They are identical monitors. The "#2" monitor is set as the main display, if that matters. I glanced at the power saving settings but didn't see anything noteworthy, and I'm not sure what I would be looking for (or if that is the right place to look) in the first place. It's not the end of the world but it is annoying. Help?

  Read the article

• What's the best multiple monitor setup I can buy for $500 and a macbook?

  - by kevinburke

  I've got a 13' white MacBook from 2008 and I'd like to run one or two external monitors, my budget is $500. I've tried to do research and this is what I was going to get - will these work OK? Two Diamond BVU195 HD USB Display Adapters (DVI and VGA with included DVI to VGA adapter) to plug into the USB port Two Dell ST2310 monitors One external USB hub so I don't use up both of my USB ports Will this work? I've read some people say it does and some people say it doesn't, but I don't know enough to say either way. Also do you have recommendations for a better monitor than the dell sd2310? what's the best setup I can buy for $500? Thanks very much for your help, Kevin

  Read the article

• GeForce GT 430 with 1 VGA port and 1 HDMI port can support dual monitor?

  - by Tendou Kishi

  This question is similar to 3 Monitors, 1 graphics card but with different video card. It has the same ports as GT 120 in that question. Would it support dual monitor? I don't need 3 monitors. Just 2 is good. Checked GeForce GT 430 Specs but have no idea whether it will support or not. While on it, can somebody explain how to know whether a graphics card support multiple display from such information?

  Read the article

• Multi-monitor resolution and position settings lost after reboot

  - by SoftDeveloper

  I've had two 1280x1024 monitors running for years on an nVidia 8800GT card with no problems. I've now replaced one monitor with a new 2560x1440 one. The card seems to support both fine, however every time I reboot the resolutions and monitor positions revert to the old settings. I've tried upgrading, downgrading, stripping out and reinstalling many versions of the nvidia drivers to no avail. Logging in as another user doesn't help - same problem. Booting into another another OS (Win7 64) works OK, so it is just this OS installation. During boot up everything looks fine (ie native 2450x1440 res) until the nVidia control panel or something is loaded which flips it back into the old mode. I have no old saved nvidia profiles. I can't find anything in the registry relating to these old settings. Its driving me crazy having to set resolutions and realign monitors on every reboot! Can anybody help?

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >