Search Results

Search found 28459 results on 1139 pages for 'nuevo ubuntu'.

Page 18/1139 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• Experiences with Ubuntu One?

  - by rsuarez

  I'm currently testing several backup/sync services: Dropbox, SpiderOak and Ubuntu One. Of them, Dropbox is the winner hands down; SpiderOak is nice too, but a bit more intrusive and unpredictable (sometimes is slow in syncing some files, or doesn't sync them at all). Ubuntu One has promise, but I've used it much less than the other two. I'm thinking about buying a "20 pack" and using Ubuntu One as my only synchronization software. It's the cheapest of them all (3$/month vs 10$ in Dropbox and SpiderOak), and 20GB of space is enough for me. My intention is to sync most of my $HOME folder. All the computers I'll connect will have Ubuntu installed, so not being multiplatform doesn't really matter to me. If its performance is as good as Dropbox's, I'm sold. But I'd like to gauge some experiences here first. Is anyone using it seriously? I.e., to sync a lot of files that change often (like the aforementioned $HOME folder, program sources, or something alike). What have been your experiences? Thanks in advance.

  Read the article

• 404 Errors in ubuntu 13.10

  - by Levan

  Just installed ubuntu 13.10 I did apt-update in terminal and sow this Err http://ppa.launchpad.net /ubuntu/saucy amd64 Packages 404 Not Found Err http://ppa.launchpad.net /ubuntu/main amd64 Packages 404 Not Found Err http://ppa.launchpad.net /ubuntu/saucy i386 Packages 404 Not Found Err http://ppa.laun W: Failed to fetch http://ppa.launchpad.net/ubuntu-wine/ppa/dists//ubuntu/saucy/binary-amd64/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/ubuntu-wine/ppa/dists//ubuntu/main/binary-amd64/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/ubuntu-wine/ppa/dists//ubuntu/saucy/binary-i386/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/ubuntu-wine/ppa/dists//ubuntu/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. I do not understand why am I getting this errors wine's ppa shows that 13.10 is available and the above I even do not know what is it ?? any help how to fix this grep -rn "ubuntu-wine" /etc/apt/sources* /etc/apt/sources.list.d/ubuntu-wine-ppa_-saucy.list:1:deb http://ppa.launchpad.net/ubuntu-wine/ppa /ubuntu saucy main /etc/apt/sources.list.d/ubuntu-wine-ppa_-saucy.list:2:# deb-src http://ppa.launchpad.net/ubuntu-wine/ppa /ubuntu saucy main

  Read the article

• Setting Ubuntu Global PATH for Ruby Enterprise Edition

  - by Wally Glutton

  Context: I recently installed Ruby Enterprise Edition (REE) on an Ubuntu 8.04 server. I would like for this new version of Ruby to globally supersede (for all users, crontabs, etc) the older version in /usr/local/bin. Attempted Solution #1: The REE documentation recommends placing the REE bin folder at the beginning of the global PATH in /etc/environment. I altered the PATH line in this file to read: PATH="/opt/ruby_ee/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" This did affect my PATH at all. Attempted Solution #2: Next I followed these instructions and updated the PATH setting in the /etc/login.defs and /etc/crontab files. (I did not change /etc/sudoers.) This didn't affect my PATH either, even after logging out and rebooting the server. Other information: I seem to be having the same problem described here. I'm testing using the command: echo $PATH My shell is bash. My .bashrc doesn't not alter my PATH. I'm ssh'ed into the system for all testing. /opt/ruby_ee/ is a sym-link to /opt/ruby-enterprise-1.8.7-2011.03/

  Read the article

• strange Postfix logwatch log summary on my ubuntu vps

  - by DannyRe

  Hi I would be very thankful if someone could help me on explaining this logwatch summary of my postfix installation on my ubuntu 10.04 vps. I dont really know if this might be a normal log file because of the many authentication failed entries and foreign IP addresses. Any advise for a novice? Thx! ****** Summary ************************************************************************************* 113 SASL authentication failed 195 Miscellaneous warnings 8.419K Bytes accepted 8,621 8.419K Bytes delivered 8,621 ======== ================================================== 3 Accepted 60.00% 2 Rejected 40.00% -------- -------------------------------------------------- 5 Total 100.00% ======== ================================================== 2 5xx Reject relay denied 100.00% -------- -------------------------------------------------- 2 Total 5xx Rejects 100.00% ======== ================================================== 116 Connections 1 Connections lost (inbound) 116 Disconnections 3 Removed from queue 3 Delivered 1 Hostname verification errors ****** Detail (10) ********************************************************************************* 113 SASL authentication failed -------------------------------------------------------------- 113 92.24.80.207 host-92-24-80-207.ppp.as43234.net 113 LOGIN 113 generic failure 195 Miscellaneous warnings ------------------------------------------------------------------ 113 SASL authentication failure: cannot connect to saslauthd server: Permission denied 41 inet_protocols: IPv6 support is disabled: Address family not supported by protocol 41 inet_protocols: configuring for IPv4 support only 2 5xx Reject relay denied ----------------------------------------------------------------- 1 46.242.103.110 unknown 1 [email protected] 1 114.42.142.103 114-42-142-103.dynamic.hinet.net 1 [email protected] 1 Connections lost (inbound) -------------------------------------------------------------- 1 After RCPT 3 Delivered ------------------------------------------------------------------------------- 3 myhost.xx 1 Hostname verification errors ------------------------------------------------------------ 1 Name or service not known 1 46.242.103.110 broadband-46-242-103-110.nationalcablenetworks.ru === Delivery Delays Percentiles ============================================================ 0% 25% 50% 75% 90% 95% 98% 100%

  Read the article

• Ubuntu 10.04: Unable to Start RabbitMQ Server Post-Installation

  - by Garland W. Binns

  After installing RabbitMQ on Ubuntu 10.04 I receive a failure message that the service was unable to start. Any insight into the issue would be greatly appreciated! Below are contents of startup_log and startup_err. Startup_log: {error_logger,{{2012,7,7},{15,50,31}},"Protocol: ~p: register error: ~p~n",["inet_tcp",{{badmatch,{error,etimedout}},[{inet_tcp_dist,listen,1},{net_kernel,start_protos,4},{net_kernel,start_protos,3},{net_kernel,init_node,2},{net_kernel,init,1},{gen_server,init_it,6},{proc_lib,init_p_do_apply,3}]}]} {error_logger,{{2012,7,7},{15,50,31}},crash_report,[[{initial_call,{net_kernel,init,['Argument__1']}},{pid,<0.20.0>},{registered_name,[]},{error_info,{exit,{error,badarg},[{gen_server,init_it,6},{proc_lib,init_p_do_apply,3}]}},{ancestors,[net_sup,kernel_sup,<0.9.0>]},{messages,[]},{links,[#Port<0.100>,<0.17.0>]},{dictionary,[{longnames,false}]},{trap_exit,true},{status,running},{heap_size,987},{stack_size,24},{reductions,512}],[]]} {error_logger,{{2012,7,7},{15,50,31}},supervisor_report,[{supervisor,{local,net_sup}},{errorContext,start_error},{reason,{'EXIT',nodistribution}},{offender,[{pid,undefined},{name,net_kernel},{mfa,{net_kernel,start_link,[[rabbitmqprelaunch877,shortnames]]}},{restart_type,permanent},{shutdown,2000},{child_type,worker}]}]} {error_logger,{{2012,7,7},{15,50,31}},supervisor_report,[{supervisor,{local,kernel_sup}},{errorContext,start_error},{reason,shutdown},{offender,[{pid,undefined},{name,net_sup},{mfa,{erl_distribution,start_link,[]}},{restart_type,permanent},{shutdown,infinity},{child_type,supervisor}]}]} {error_logger,{{2012,7,7},{15,50,31}},std_info,[{application,kernel},{exited,{shutdown,{kernel,start,[normal,[]]}}},{type,permanent}]} {"Kernel pid terminated",application_controller,"{application_start_failure,kernel,{shutdown,{kernel,start,[normal,[]]}}}"} Startup_err: Crash dump was written to: erl_crash.dump Kernel pid terminated (application_controller) ({application_start_failure,kernel,{shutdown,{kernel,start,[normal,[]]}}})

  Read the article

• Ubuntu 12.04 on VMware Player loses network configuration

  - by d4ryl3

  I've been having this issue for 2 weeks now with my VMware Player-hosted Ubuntu 12.04. I only use it for my LAMP stack. I've had no issues with it before until about 2 weeks ago when it almost always (once per day at least) loses its network configuration. On boot it shows: Waiting for network configuration... Waiting up to 60 more seconds for network configuration... Booting system without full network configuration... Then when I do ifconfig -a it doesn't show an IP Address and couldn't get online. The only resolutions I've found so far was either to reinstall VMware Tools or use the VMware Player installer and choose Repair. This is frustrating to me because even when the issue was resolved after doing either of the steps I mentioned, the IP Address gets changed. Then I'd have to update the Remote Configuration of my IDE (Netbeans) and my database manager. What could possible cause this? Please help. Thank you. Additional details: I'm using a laptop with Windows 7 and connected to the office WiFi, which is unrestricted as far as I know. Thanks again.

  Read the article

• Ubuntu 10.04 Server on Hyper-V Server R2 has sluggish install and command line

  - by Paul Hobart

  I've installed Ubuntu Server 10.04 (64 bit) on a Hyper-V Server R2. I've encountered two issues that I think are related: Very slow install Very slow command prompt The text-mode installer goes through a series of text-based prompt windows. It takes 7-10 seconds for each of these windows to draw on the screen. The end result is that every time I answer a prompt and hit enter I wait for 15 seconds while the screen redraws line by line. I can literally see each line of text being drawn (like the old 300 baud modems days). Once done installing, scrolling on the command line is super slow. For instance, if a simple command, like "ls", causes the screen to scroll, it will scroll very slowly. This happens on a fresh install. The server functions as a LAMP server and an OpenSSH server, but that's it (I don't even have any Virtual Hosts set up yet). AND this only happens on the Virtual Machine console. I access the console through Hyper-V Manager and don't have this problem on any of my other Virtual Machines. Also, this problem does NOT happen when accessing a shell through OpenSSH. How can I improve this performance issue?

  Read the article

• configure Squid3 proxy server on Ubuntu with caching and logging

  - by Panshul

  I have a ubuntu 11.10 machine. Installed Squid3. When i configure the squid as http_access allow all, everything works fine. my current configuration mostly default is as follows: 2012/09/10 13:19:57| Processing Configuration File: /etc/squid3/squid.conf (depth 0) 2012/09/10 13:19:57| Processing: acl manager proto cache_object 2012/09/10 13:19:57| Processing: acl localhost src 127.0.0.1/32 ::1 2012/09/10 13:19:57| Processing: acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 2012/09/10 13:19:57| Processing: acl SSL_ports port 443 2012/09/10 13:19:57| Processing: acl Safe_ports port 80 # http 2012/09/10 13:19:57| Processing: acl Safe_ports port 21 # ftp 2012/09/10 13:19:57| Processing: acl Safe_ports port 443 # https 2012/09/10 13:19:57| Processing: acl Safe_ports port 70 # gopher 2012/09/10 13:19:57| Processing: acl Safe_ports port 210 # wais 2012/09/10 13:19:57| Processing: acl Safe_ports port 1025-65535 # unregistered ports 2012/09/10 13:19:57| Processing: acl Safe_ports port 280 # http-mgmt 2012/09/10 13:19:57| Processing: acl Safe_ports port 488 # gss-http 2012/09/10 13:19:57| Processing: acl Safe_ports port 591 # filemaker 2012/09/10 13:19:57| Processing: acl Safe_ports port 777 # multiling http 2012/09/10 13:19:57| Processing: acl CONNECT method CONNECT 2012/09/10 13:19:57| Processing: http_access allow manager localhost 2012/09/10 13:19:57| Processing: http_access deny manager 2012/09/10 13:19:57| Processing: http_access deny !Safe_ports 2012/09/10 13:19:57| Processing: http_access deny CONNECT !SSL_ports 2012/09/10 13:19:57| Processing: http_access allow localhost 2012/09/10 13:19:57| Processing: http_access deny all 2012/09/10 13:19:57| Processing: http_port 3128 2012/09/10 13:19:57| Processing: coredump_dir /var/spool/squid3 2012/09/10 13:19:57| Processing: refresh_pattern ^ftp: 1440 20% 10080 2012/09/10 13:19:57| Processing: refresh_pattern ^gopher: 1440 0% 1440 2012/09/10 13:19:57| Processing: refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 2012/09/10 13:19:57| Processing: refresh_pattern (Release|Packages(.gz)*)$ 0 20% 2880 2012/09/10 13:19:57| Processing: refresh_pattern . 0 20% 4320 2012/09/10 13:19:57| Processing: http_access allow all 2012/09/10 13:19:57| Processing: cache_mem 512 MB 2012/09/10 13:19:57| Processing: logformat squid3 %ts.%03tu %6tr %>a %Ss/%03>Hs %<st %rm %ru 2012/09/10 13:19:57| Processing: access_log /home/panshul/squidCache/log/access.log squid3 The problem starts when I enable the following line: access_log /home/panshul/squidCache/log/access.log I start to get proxy server is refusing connections error in the browser. on commenting out the above line in my config, things go back to normal. The second problem starts when i add the following line to my config: cache_dir ufs /home/panshul/squidCache/cache 100 16 256 The squid server fails to start. Any suggestions what am I missing in the config. Please help.!!

  Read the article

• Intel NIC X540-T1 non-functional in Ubuntu Server 12.04

  - by Jeff Carr

  I have installed three Intel X540-T1's in servers running Ubuntu Server 12.04, but all are non-functional, no link lights, no packets sent or received, and no connection on ip4 or ip6 whether set up as dhcp or static. Also, dmesg doesn't detect cable connection or disconnection. I updated the default ixgbe driver to Intel's latest version (3.11.33) with no change. The ethernet controller is being reported as X540-AT2 (which might be a problem that I can't figure out how to fix), but the subsystem is X540-T1 so I believe that might be intended. Does anyone have any experience with this that could assist? ifconfig eth2 eth2 Link encap:Ethernet HWaddr a0:36:9f:14:5f:ea inet addr:192.168.101.1 Bcast:192.168.101.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1<br> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ethtool -i eth2 driver: ixgbe version: 3.11.33 firmware-version: 0x8000037c bus-info: 0000:08:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes lspci -vvnns 08:00.0 08:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller 10 Gigabit X540-AT2 [8086:1528] (rev 01) Subsystem: Intel Corporation Ethernet Converged Network Adapter X540-T1 [8086:0002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e8000000 (64-bit, prefetchable) [size=2M] Region 4: Memory at e8200000 (64-bit, prefetchable) [size=16K] [virtual] Expansion ROM at e8280000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: ixgbe Kernel modules: ixgbe

  Read the article

• Ubuntu 64bit Xen DomU Issues after upgrade from Karmic to Lucid

  - by Shoaibi

  I was upgrading my servers today and it all went fine except the last machine which has the following issues: [Resolved using http://www.ndchost.com/wiki/server-administration/upgrade-ubuntu-pre-10.04#post-1004-upgradefinal-steps] No login prompt on console Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... Done. [ 0.545705] blkfront: xvda: barriers enabled [ 0.546949] xvda: xvda1 [ 0.549961] blkfront: xvde: barriers enabled [ 0.550619] xvde: xvde1 xvde2 Begin: Running /scripts/local-premount ... Done. [ 0.870385] kjournald starting. Commit interval 5 seconds [ 0.870449] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... Done. Done. Begin: Running /scripts/init-bottom ... Done. Also tried by pressing ENTER and CTRL+C many times, no use. Resolved: [/tmp was mounted as noexec, changing that fix it]: I get errors when i try to re-install udev in single user mode: Unpacking replacement udev ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for man-db ... Setting up udev (151-12.1) ... udev start/running, process 1003 Removing `local diversion of /sbin/udevadm to /sbin/udevadm.upgrade' update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.32-25-server /usr/sbin/mkinitramfs: 329: /tmp/mkinitramfs_yuuTSc/scripts/local-premount/fixrtc: Permission denied /usr/sbin/mkinitramfs: 329: /tmp/mkinitramfs_yuuTSc/scripts/local-premount/ntfs_3g: Permission denied /usr/sbin/mkinitramfs: 329: /tmp/mkinitramfs_yuuTSc/scripts/local-premount/resume: Permission denied /usr/sbin/mkinitramfs: 329: /tmp/mkinitramfs_yuuTSc/scripts/nfs-top/udev: Permission denied /usr/sbin/mkinitramfs: 329: /tmp/mkinitramfs_yuuTSc/scripts/panic/console_setup: Permission denied /usr/sbin/mkinitramfs: 329: /tmp/mkinitramfs_yuuTSc/scripts/init-top/all_generic_ide: Permission denied /usr/sbin/mkinitramfs: 329: /tmp/mkinitramfs_yuuTSc/scripts/init-top/blacklist: Permission denied /usr/sbin/mkinitramfs: 329: /tmp/mkinitramfs_yuuTSc/scripts/init-top/udev: Permission denied /usr/sbin/mkinitramfs: 329: /tmp/mkinitramfs_yuuTSc/scripts/init-bottom/udev: Permission denied /usr/sbin/mkinitramfs: 329: /tmp/mkinitramfs_yuuTSc/scripts/local-bottom/ntfs_3g: Permission denied

  Read the article

• Ubuntu karmic, chroot, Ubuntu server 8.04 LTS and Plesk

  - by morpheous

  I am pretty new to the Linux environment, and although I have been using Ubuntu Karmic desktop for development work, I have always prefered the GUI tools and very rarely use the terminal. I am about to launch a site (a VPS) which will be running Ubuntu server 8.04 LTS and Plesk. I want to install both the server (8.04 LTS) and Plesk in a 'chroot' on my Karmic desktop. I also want to test install some packages I have written for the server, and generally familiarize myself with the environment before I signup to the hosting service. I will be running a streamline server (no GUI), with only the following software: PHP Python mySQL PostgreSQL Apache Plesk Third party packages I developed In terms of mail, I think the hosting provider provides a mail service, so I dont know if I will need to run my own mail server. I will like some advice on the following: How can I install Ubuntu 8.0.4 server LTS in a chroot? How can I install Plesk in Ubuntu 8.0.4 server LTS (from the command line) Can anyone recommend how I back up the remote server when I go live (i.e. what tools to use)?. I will need to back up both databases, as well as some config data and installation packages

  Read the article

• Connection refused after installing vsftp on Ubuntu 8.04 with fail2ban

  - by Patrick

  I have been using an Ubuntu 8.04 server with fail2ban for a while now (12+ months) and using ftp over SSH without any problems. I have a new user that needs to put files onto the server from an IP modem. I have installed vsftp (sudo apt-get install vsftp) and everything installed correctly. I have created an ftp user on the server following this guide. Whenever I try to connect to the server with my ftp program (filezilla) I get an immediate response of: Connection attempt failed with "ECONNREFUSED - Connection refused by server". I have looked into fail2ban and cannot find any problems. The iptables setup is: Chain INPUT (policy ACCEPT) target prot opt source destination fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain fail2ban-ssh (1 references) target prot opt source destination RETURN all -- anywhere anywhere VSFTP config file (commented lines removed) listen=YES anonymous_enable=NO local_enable=YES write_enable=YES dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES chown_uploads=YES chown_username=[username] secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Any ideas on what is preventing access to the server?

  Read the article

• Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

  - by Bluebill

  I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: fsck from util-linux-ng 2.16 There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots?

  Read the article

• Ubuntu - No gnome-panels, no right-click, no internet, no hotkeys

  - by Darthfett

  Hey guys, I've been using Ubuntu (Maverick 10.10) on my desktop (ATI Radeon 5830) for about 3 weeks now, but all of a sudden I am unable to even use my computer. As soon as I start up, I see my desktop, with icons, but I don't see any gnome-panels, and I'm unable to get any options if I right-click. I can start programs by double clicking them. I also cannot get an internet connection. I've tried restarting gnome-panel by killing it, using Ctrl+Alt+5 to switch to a terminal (I don't have a shortcut to one on my desktop, and no hotkeys will work), but no luck. Restarting my computer has no effect upon this (I have to manually cut the power, since I don't know the terminal command). As far as I know, I have not made any changes, and I've never had any problems in the past. This started when I was playing Minecraft, but my internet crapped out, and no amount of re-trying the connection would work. I know it was my computer, as my brother's was working fine in the other room. Any clues as to what's going on? I'm more than willing to troubleshoot.

  Read the article

• Virtual host redirects to localhost in Ubuntu

  - by Salman

  I have recently configured Virtual Host in my Ubuntu 11.10. But whatever site i type, it always redirects to the localhost page. This is my "our-test-site" file: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/zftut/public <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/zftut/public/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> and this is my, "etc/hosts" file: 127.0.0.1 localhost 127.0.0.1 our-test-site.local 127.0.0.1 zftut.local 127.0.1.1 System.B System Now when I try to go for "zftut.local", it redirects me to localhost page, showing me this: It works! This is the default web page for this server. The web server software is running but no content has been added, yet. What am I doing wrong? I refered "this" tutorial for setting up virtual host.

  Read the article

• ubuntu 10.04 + php + postfix

  - by mononym

  I have a server I am running: Ubuntu 10.04 php 5.3.5 (fpm) Nginx I have installed postfix, and set it to loopback-only (only need to send) The problem is it is not sending. if i issue (at command line): echo "testing local delivery" | mail -s "test email to localhost" [email protected] I get the email no problem, but through PHP it does not arrive. When I send it via PHP, mail.log shows: Mar 28 10:15:04 host postfix/pickup[32102]: 435EF580D7: uid=0 from=<root> Mar 28 10:15:04 host postfix/cleanup[32229]: 435EF580D7: message-id=<20120328091504.435EF580D7@FQDN> Mar 28 10:15:04 host postfix/qmgr[32103]: 435EF580D7: from=<root@FQDN>, size=1127, nrcpt=1 (queue active) Mar 28 10:15:04 host postfix/local[32230]: 435EF580D7: to=<root@FQDN>, orig_to=<root>, relay=local, delay=3.1, delays=3/0.01/0/0.09, dsn=2.0.0, status=sent (delivered to maildir) Mar 28 10:15:04 host postfix/qmgr[32103]: 435EF580D7: removed any help appreciated, my main.cf file: smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = FQDN alias_maps = hash:/etc/aliasesalias_database = hash:/etc/aliases myorigin = /etc/mailname #myorigin = $mydomain mydestination = FQDN, localhost.FQDN, , localhost relayhost = $mydomain mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = loopback-only virtual_alias_maps = hash:/etc/postfix/virtual home_mailbox = mail/

  Read the article

• ubuntu 9.04 pptp broken after a power failure

  - by kevin42

  I have a small Ubuntu 9.04 router setup as a NAT box and a PPTP server. After a power failure everything except the PPTP server still works. A windows client gets to "registering your computer on the network" but then says Error 742: The remote computer does not support the required data encryption type. I did some research and I think the problem is with the ppp_mppe module. When I try to run 'modprobe ppp_mppe' it hangs indefinitely. What would cause this hang? Any ideas how I can troubleshoot this further? Thanks for the help! UPDATE: I am still having the problem, however I have found some more information. When the first user tries to connect to pptp, the process list shows modprobe sha1 running, and one instance of modprobe ppp_mppe for each connection attempt. If I killall modprobe at this point the next connection attempt works, and everything is fine until the next reboot. I'm planning to do a clean install at some point in the future but I'd really like to get to the real cause of this.

  Read the article

• Changing PATH Environment Variable for all Users. (Ubuntu)

  - by Wally Glutton

  I recently compiled Ruby Enterprise Edition (REE) on an Ubuntu 8.04 server. I would like to update my PATH to ensure this new version of Ruby (found in /opt/ruby_ee/bin) supersedes the older version in /usr/local/bin. (I still want the old version around, though.) I would like these PATH changes to affect all users and crontabs. Attempted Solution #1: The REE documentation recommends placing the REE bin folder at the beginning of the global PATH in /etc/environment. I altered the PATH in this file to read: PATH="/opt/ruby_ee/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" This did not affect my PATH at all. Attempted Solution #2: Next I followed these instructions and updated the PATH setting in /etc/login.defs and /etc/crontab. (I did not change /etc/sudoers.) This didn't affect my PATH either, even after logging out and rebooting the server. Other information: I seem to be having the same problem described here. I'm testing using the commands "echo $PATH" and "ruby -v". My shell is bash. My .bashrc doesn't override my PATH. Yes, I have heard of the Ruby Version Manager project. ;)

  Read the article

• Can't connect to vsftpd on Ubuntu 10.04

  - by Johnny

  I started the vsftpd on Ubuntu 10.04, but can't connect to it. The error says(FTP Client): Status: Connecting to 124.205.xx.xx:21... Error: Connection timed out Error: Could not connect to server I've checked the server status, and vsftpd is running: $ ps ax | grep vsftpd 23646 ? Ss 0:00 /usr/sbin/vsftpd 23650 pts/1 S+ 0:00 grep --color=auto vsftpd port 21 is under listening as well: $ netstat -tlnp | grep 21 (No info could be read for "-p": geteuid()=1000 but you should be root.) tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN - I can connect to localhost: $ ftp localhost Connected to localhost. 220 (vsFTPd 2.2.2) Name (localhost:jlee): 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> Here is iptables output $ sudo iptables -vL Chain INPUT (policy ACCEPT 191 packets, 144K bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 124 packets, 28502 bytes) pkts bytes target prot opt in out source destination What's the problem here?

  Read the article

• Storing secure keys on Ubuntu web server

  - by Sencha

  I'm running Ubuntu 12.04 Precise with a DUNG (Django, Unix, Nginx & Gunicorn) environment and my app (as well as various config files) is stored in a python virtual environment inside /srv, which the www-data user has access to. The nginx & gunicorn processes are all run as www-data. My web app requires secure credentials which I am storing in an environment.sh file. This file contains various exports and is run using source before the gunicorn processes execute. My concern is the location of the environment.sh file and it's permissions. Will it be okay storing this file inside the /srv folder where the www-data has access to it? Or should it be stored and owned by root somewhere else such as /var/myapp/environment.sh? Also, regarding the www-data user, if any of my web processes (which are run as www-data) are compromised and someone gains access to them, does that mean that the user could potentially read any file on the system, even if they can't write? Including my secure keys?

  Read the article

• Booting Ubuntu as VM with KVM on Ubuntu 12.04

  - by CrazycodeMonkey

  I am trying to boot my very first VM using KVM. I have Ubuntu 12.04 installed, i made sure the BIOS had the right virtualization flag enabled for intel processor by running kvm-ok. I have researched this on google and all the instructions that i have found so far are outdated. for e.g. most instructions talk about booting a virtual machine with the following commands qemu-img create -f qcow2 foo.img 100G --- create a virtual disk for your VM kvm --name foo -m 1024 -hda foo.img -cdrom whatever.iso -boot d -- This runs kvm. This command line is incomplete. First you need to be root to run this. Second- it is missing option for the video device. When you run this command you get the following error "Could not initialize SDL(No available video device) - exiting" Googled this error and looked it up on stackover flow http://stackoverflow.com/questions/4841908/sdl-init-failure-reason-is-no-available-video-device The answer provided here does not work on Ubuntu 12.04 Googled this problem further and found out that i need to specify a video device so I finally ran the following command sudo kvm --name mymachine -m 8096 -hda myimage.img --cdrom ubuntu.iso -boot d -vga cirruss -k en-us -vmc :0 This was after I had created the myimage.img image on the drive. Now this command does not give me an error but it just hangs. Does anyone have clear instructions on how to run a VM using KVM on Ubuntu?

  Read the article

• Ubuntu + LigHTTPd: Server requests taking ages

  - by ctrl_freak

  I've had an issue since upgrading my distro a couple of weeks ago from hardy; receiving data after making a request has increasing intervals of nothing, as you can see from the picture below. http://i49.tinypic.com/2w5lvr9.png I have since reinstalled fresh from an Ubuntu 10.04 Server (i386) disk, but am still having the same issues. I'm running on a LigHTTPd, MySQL, PHP5 stack. The surprising thing is, that local browsing using lynx is super fast, as expected. Initially, after reinstalling, I copied over the old configuration files from the previous installation, but have since reinstalled LigHTTPd and rebuilt the config file from scratch. The only correlation I could find, was that I attempted installation of ionCube and Zend Optimizer for a script I was testing, however I would think that it could no longer impact seeing I had reinstalled the OS. I have also removed Suhosin just in case, however it had no impact. I'm thinking it possibly has something to do with networking, but I wouldn't know where to start. The server is manually assigned an IP by it's MAC address on the router. The fact that the time seems to be exponential (to a point) worries me. I've tried strace'ing the LigHTTPd and MySQL processes, however I couldn't see anything obvious, not that I'd really know what I'm looking for. RAM and CPU usage don't seem to be out of the ordinary, but I can't say its perfect.. I'm hoping someone has experienced the same, or can point me in a direction, as searching has proved fruitless as I don't know anything specific. Config files can be posted, if requested.

  Read the article

• Proftpd on Ubuntu - Create directory permission denied (550 ) after upgrade to 9.10

  - by Ian

  Hi all, I am having problems with ProFTPD since I upgraded to Ubuntu 9.10 from 9.04. When I login as my ftp user (userftp) in the terminal I can create dirs fine in their home dir. But when I use ftp as this user permission is denied (550 asl: permission denied) when I try and do the same operation (creating a dir). Uploading files is fine though. I am using the same config for proftpd as I was before, I can't understand what's wrong. Any help appreciated! Config follows: Include /etc/proftpd/modules.conf UseIPv6 on IdentLookups off ServerName "whatever" ServerType inetd DeferWelcome off MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ DefaultRoot ~ Port 21 <IfModule mod_dynmasq.c> </IfModule> MaxInstances 8 User proftpd Group nogroup Umask 022 022 AllowOverwrite on TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # My additions # MaxLoginAttempts 5 # # My user config # #VALID LOGINS <Limit LOGIN> AllowUser userftp DenyALL </Limit> <Directory /home/userftp> Umask 022 022 AllowOverwrite off <Limit MKD STOR DELE XMKD RNRF RNTO RMD XRMD> DenyAll </Limit> </Directory> <Directory /home/userftp/upload/> Umask 022 022 AllowOverwrite on <Limit READ> DenyAll </Limit> <Limit STOR CWD MKD RMD DELE> AllowAll </Limit> </Directory>

  Read the article

• Help to setup networking in Virtualbox Ubuntu Guest from Windows vista Host

  - by Ramesh Vel

  Hi, I am trying to access the MYSQL installed inside the Ubuntu Guest (In VirtualBox) from my Windows vista Host. It always says not able to find the given IP in the network. I have tried ping the ubuntu virtual machine, but it was not working. So i believe root cause for this is, some bridging between Host & Guest is not enabled. Since i am very new to Ubuntu, am not able to troubleshoot this. Can someone help me out? Cheers

  Read the article

• Ubuntu for Android on the ASUS Transformer Prime

  - by sola

  I would like to use Ubuntu on my Transformer Prime in parallel with Android (not as a dual booting solution, I want to be able to switch between them instantaniously). I am aware of the traditional chrooting/VNC solution but I heard that it performs very poorly so I would like to use Ubuntu For Android (UFA) which has been announced recently by Canonical. That looks like a polished, highly integrated solution for Android devices. The Prime would be the ideal device for Ubuntu For Android since it has a powerful processor (Tegra3) capable of running a lot of processes in parallel on its 4 cores. Does anyone know if Canonical or anybody else is working on supporting UFA on the ASUS Transformer Prime? As far as I understand, the X11 driver is available for Tegra3 so, the biggest hurdle may be easily overcome.

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >