Search Results

Search found 601 results on 25 pages for 'so very tired'.

Page 18/25 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• How does the Windows RENAME command interpret wildcards?

  - by dbenham

  How does the Windows RENAME (REN) command interpret wildcards? The built in HELP facility is of no help - it doesn't address wildcards at all. The Microsoft technet XP online help isn't much better. Here is all it has to say regarding wildcards: "You can use wildcards (* and ?) in either file name parameter. If you use wildcards in filename2, the characters represented by the wildcards will be identical to the corresponding characters in filename1." Not much help - there are many ways that statement can be interpretted. I've managed to successfully use wildcards in the filename2 parameter on some occasions, but it has always been trial and error. I haven't been able to anticipate what works and what doesn't. Frequently I've had to resort to writing a small batch script with a FOR loop that parses each name so that I can build each new name as needed. Not very convenient. If I knew the rules for how wildcards are processed then I figure I could use the RENAME command more effectively without having to resort to batch as often. Of course knowing the rules would also benefit batch development. (Yes - this is a case where I am posting a paired question and answer. I got tired of not knowing the rules and decided to experiment on my own. I figure many others may be interested in what I discovered)

  Read the article

• Linux Mint Constantly freezing on Dell XPS L502X

  - by Josh

  I recently partitioned my hard drive to dual boot the existing Windows 7 with Linux Mint because I am tired of using Windows, especially the lack of terminal. I want to eventually remove Windows 7 and just run it from a VM within Linux Mint, but I want to make sure that I like the Mint before going all in. I ran Linux Mint on a VM inside Windows for a while, enjoyed it, and never had any issues with it. Since installing on my hard drive it has started freezing every 5-10 minutes, and the only way to get it back is to either power down, or close the lid and reopen once it sleeps. I've also tried running Ubuntu on dual boot in the past, and while it never froze, the battery life was terrible, and the fan was constantly running. I'm experiencing the same battery/fan problem with Mint, which doesn't make sense to me, as Linux should be lighter on the CPU than windows. If I had to guess I'd say it's probably a driver thing, with my video card or fan or something. My battery life in Windows is ~2 hours and its about 40 minutes in Linux. At this point, that is even if my laptop doesn't freeze before then. On a less important note, I also have an intel Centrino 6150 WiMax card that I'd like to be able to use, but that won't register on the Linux system either. I have tried downloading drivers for both of these, but neither have solved my problems. I'm definitely getting frustrated and am getting close to giving up on Linux even though I dread working on a Windows machine.

  Read the article

• How do you optimize your Outlook Exchange + IMAP setup?

  - by Mike

  My company provides an Outlook/Exchange account we must use for mail/calendar. Like many companies, they unfortunately also provide a ridiculously small mail quota. I got tired of managing and backing up .pst files (since I'm always in my e-mail there is never a good time to back it up), so I started storing my archived mail "in the cloud", using an IMAP server I set up on my Linux box. This has a few drawbacks for me: IMAP (at least the implementation in Outlook) is *very slow*. Furthermore, if I move a large number of messages to the IMAP server, it blocks the entire Outlook client for hours sometimes, which is quite annoying. Can't use exchange over HTTP to do mail without launching a VPN session, because the client-side rules I have which organize my mail fail and disable the rule if the IMAP server can't be reached. If I reply to a message from my IMAP store, I have to specify a SMTP server willing to relay for me in order to send e-mail, unless I always remember to select my Exchange account while composing e-mail. ... but the main advantage of being very easy to back up, with a couple of cron jobs that essentially do an 'rsync'. Short of moving the IMAP server to my local host (which seem like might have the same file locking problems as using a .pst), my options seem limited for solving (1). I'd like to come up with a solution for (2) and (3) though. For problem (2) would it be possible to somehow tell Outlook that the IMAP server is "offline", and have it synchronize my changes during a periodic "send and receive"? If so, I wonder if it would block the Outlook client, like it does in problem (1), and if it would be compatible with the client-only rules I use to sort my mail into folders. I've looked all over the options menu and have not found a way to tell Outlook to not use a certain account for sending mail, which would solve (3). Is anyone else crazy enough to be doing something like this? Any ideas?

  Read the article

• User-unique .vimrc file for servers as root user

  - by Scott

  I'm getting thrown into an IDE war at the office, where multiple users have root access on our servers, and like to have everything their own way with VIM. Unfortunately, we have our servers locked down enough to where if you want to do anything, you need to have root access. Obviously (although this is obviously frowned upon), we get tired of typing sudo before each command we type, which would require that we constantly type in our wonderfully complex passwords that are mandated on us over and over again, so naturally we all just execute the sudo su - command upon login to avoid all of this. Of course, when it comes to VIM and custom .vimrc files, we are often times stepping on someone else's custom .vimrc file, and we have some whacked out functionality in these files that users have that may overwrite functionality that we have no idea about, much less have the patience to learn either. When as root on a linux box, is there any way for all of us to still maintain our .vimrc file without having to overwrite the file over and over again every time someone wants to use VIM? Ideally, we have many virtual machines all with VIM installed, so a universal solution across all servers would be best, and we do have our Microsoft Windows user specific home directories mounted on the servers under /home/username. Any recommendations for accommodating this?

  Read the article

• Host couldn't be reached by domain name, only by IP: Apache's fault?

  - by MaxArt

  I have this Windows Server 2003 R2 32 bit machine running Apache 2.4.2 with OpenSSL 1.0.1c and PHP 5.4.5 via mod_fcgid 2.3.7. This config worked just fine for some hours, but then the site couldn't be reached with its domain name, say www.example.com, but it could be still reached by its IP address. In particular, while https://www.example.com/ yielded a connection error, http://123.1.2.3/ worked just fine. Yes, first https then http. Error and access logs were clean, i.e. they showed no signs of problems. Just the usual messages, that were interrupted while the site couldn't be reached. After some investigation, a simple restart of Apache solved the problem. Unfortunately, I didn't have the chance to test if https://123.1.2.3/ worked as well, or if http://www.example.com/ was still redirected to https as usual. So, has anyone have any idea of what happened? Before I get tired of Apache and ditch it in favor of Nginx? Edit: Some log informations. The last line of sslerror.log is from 90 minutes before the problem occurred, so I guess it's not important. ssl_request.log shows nothing interesting, too: these are the last two lines before the problem: [28/Aug/2012:17:47:54 +0200] x.x.x.x TLSv1.1 ECDHE-RSA-AES256-SHA "GET /login HTTP/1.1" 1183 [28/Aug/2012:17:47:45 +0200] y.y.y.y TLSv1 ECDHE-RSA-AES256-SHA "POST /upf HTTP/1.1" 73 The previous lines are all the same and don't seem interesting, except 4 lines like these 30-40 seconds before the problem: [28/Aug/2012:17:47:14 +0200] z.z.z.z TLSv1 ECDHE-RSA-AES256-SHA "-" - These are the corrisponding lines from sslaccess.log: z.z.z.z - - [28/Aug/2012:17:47:14 +0200] "-" 408 - ... x.x.x.x - - [28/Aug/2012:17:47:54 +0200] "GET /login HTTP/1.1" 200 1183 y.y.y.y - - [28/Aug/2012:17:47:45 +0200] "POST /upf HTTP/1.1" 200 73

  Read the article

• Drowning in documents - recommend doc management solutions?

  - by Martin Day

  I've been researching document management lately. I want to organise my docs at home and also at the office. Finding affordable solutions one can actually test drive is quite hard. Some that I've downloaded just don't seem to work (testing on brand new Vista PC). I've seen some software on Amazon like Paperport but not really sure what they're like. For home I'd like something to organise files, full text search, good scanner integration, nice interface etc. But for the office it seems harder. I need something that does proper workflow and keeps versions. It will have an audit trail. Documents can be approved, checked in/out etc. I know a few clients who would like something similar. It would be great just to import thousands of documents from a shared drive and get them indexed with dupes killed. I'd like to be super clear about how/where the documents are being stored so that maintenance and backups are clear. My Google/twitter searches lead back to the same tired and vague webpages pushing what look like expensive and custom made solutions. Some might be very good I suppose but it's darn hard to tell. I don't mind a hosted package but all in all I don't think something like Google Docs, as good as it is now, will work. There are too many quirks and missing features (as compared to Office). Being able to work directly with the common Office file formats is important. I've noted a similar sounding question asked here back in August but it didn't seem to turn up too many solutions that I could easily and quickly apply. Also there could have been some changes since then so I feel it's worth asking.

  Read the article

• rsync per-site configuration file?

  - by Scott

  I know how to configure a per-site entry for ssh, but is there any kind of a client configuration for rsync that allows per-site configuration options and aliases or similar shortcuts like the .ssh/config? I'm curious because I have a minimal ssh server installed on my android phone and I also have a minimal rsync tool on it as well. I'm getting tired of having to root login onto the phone and sym-link both tools to standard places the android OS looks for executables as the ssh server is bare bones and has a typical *bear multi-link binary for the basic unix commands (that does not include rsync) I end up having to include --rsync-path=/path/to/rsync/android/files/rsync every time I want to do any rsyncing of the files on my phone, but this path is always the same. I've gotten around it in the meantime with a glob approach in a shell script wrapper, but this sometimes limits the customization I can do with the rsync call. I'm just wondering if there is anything similar to the .ssh/config file where I can create an alias for my phone (e.g. 'android') where specifying rsync android:/mnt/sdcard will automatically assume --rsync-path=/blah/blah/blah --no-g --no-p --no-t etc. Tre`

  Read the article

• No partition on USB Flash Drive?

  - by Skytunnel

  A friend gave me a corrupted USB memory stick to try recovery data from. But I've had some unusual results, so thought I'd share to see if anyone is familiar with this problem... First off I just tried opening from my own PC. Windows prompted to Format the drive, which I of course declined Downloaded TestDisk to anaylsis the drive. And right away I noticed something strange, on the listed drives it comes up as Disk /dev/sdc - 6144 B - USB Flash Drive That's right, the first USB flash drive smaller than a floppy disk!? Moving on anyway... first anaylsis comes up with: Partition sector doesn't have the endmark 0xAA55 TestDisk's Quick Search gave no results, moved on to Deeper Search: No partition found or selected for recovery This left me stumped. I tired a couple of other programs with no success I did manage to get a backup image, but it was just as small as TestDisk indicated, so nothing of use on it After a few hours trying various suggestions from other sources, I gave in and just tried formatting the drive. But returned the message: Windows was unable to complete the format. From googling that, the suggestion was to delete the partition. But there is no partition to delete in this case. most recently I've tried formatting from cmd, and got this result: Format D: /FS:FAT32 The type of the file system is RAW The new file system is FAT32 Verifying 0M 11 bad sectors were encountered during the format. These sectors cannot be guaranteed to have been cleaned The volume is too small for FAT32 Anyone got any suggestions? UPDATE: As per suggestion from @Karen, I tried running a CLEAN from DISKPART, results as follows DiskPart has encountered an error: The request could not be preformed because of an I/O device error.

  Read the article

• Can't login after upgrading to Windows 8.1

  - by flatline

  This afternoon, I upgraded my work laptop from Windows 8 to Windows 8.1. I had previously had a local account, but after the upgrade, it prompted me to enter my windows account credentials, which I had set up beforehand at some point. I entered my password and clicked next, went through another screen or two, grew tired with the process, and clicked whatever the equivalent button to "skip this step" that I was presented with. Now I can't log in. Not with my (previous) local account password, and not with my windows account password. It's a Dell with biometric identification, which I had set up previously, so I put my finger on the reader and it complained that I couldn't use that fingerprint because I had changed my password. But, I hadn't wittingly changed my password at all. I assume that what happened is that, by entering my credentials, my local account was tied to the Windows account, but because I cancelled the process partway through, something went wrong and I cannot log in. A few questions: 1) How do I log in with my windows account credentials? Should LOCALMACHINENAME\username, which was my previous login method, still work for the Windows account? When I booted to safemode it prompted me with WindowsAccount\myemailaddress, which allowed me to login there, but the regular login doesn't accept the '@' symbol. 2) Is there any way to make that account local-only again? I can't find any way of doing it. 3) I managed to enable the local administrator account and get back into the box; failing all else, is there a quick way to migrate my old profile over to a new user?

  Read the article

• notepad++ select everything between tags

  - by mcflause

  I am doing some langauge translations of an old HTML website so I am just pasting the new translations from a word document into the old files. So I have to select everything between the tags (h2,p,li, etc) and then paste the new text in... from a word file. For selecting everything in between p tags I have to select one side of the inside tag then hold shift then select the next side to highlight everything... my fingers are getting really tired, and I got 40 files (pages) total with 3 languages to do. Is there a shortcut in Notepad++ to select everything between two tags (like when you double click a word it selects the whole word). <p>This is some English that needs to be translated here. I want to just click in this area to select all of this text between these two paragraph tags.</p> <p>This would be another block of translation to do</p> <ul> <li>I want to click here and select everything between the li tags</li> </ul>

  Read the article

• How can I change the default program installation directory in Windows 7?

  - by Max

  Windows 7 is installed on my C drive, which is quite small. I am very tired of instructing new programs to put their files on my larger D drive during installation; I would like to change the default drive. This article says that you can use a registry hack, but I am giving Microsoft the benefit of the doubt and naively assuming that a configuration option exists somewhere. It's 2010... do I really have to hack my registry to make a simple tweak like this? Also, there's a ServerFault question that explains how to move the "Users" directory and create a symlink, which could also work. However, at the moment I have some apps in C:\Program Files, some apps in C:\Program Files (x86), and some apps in the corresponding folders on D:\, so it would be a hassle. Also, my small OS boot drive is a 10k RPM WD Raptor, and I feel like that probably gives a speed boost to apps installed on it that need to read & write to their directories a bunch. I wonder if it actually matters.

  Read the article

• can't save or create files in external hard disk

  - by Rodniko

  i formatted my computer and installed new win7. i connected my external hard disk (usb connector) and i have some kind of permission problem. i can't save files after opening them and right clicking and choosing "new" shows that i can only create folders. what is wrong ? why doesn't the external hd doesn't have permission and how do i cahnge it? in microsoft they probably thought: "hmmm.... how would i make it difficult for the user to use our product..." , "we will have to make the difficulty as soon as the windows is installed...." " but how would we guarantee 100% for the user to have problems? "oh yhe! block creating files and saving them, yes!" i'm so tired of those guys... my HD is half a Terra, changing ownership of all the files inside will take a couple of hours , i need other ideas... if any...

  Read the article

• Managing Dependency Hell with WiX and C#

  - by Tom the Junglist

  We are on the eve of product launch, and at the last minute I am being bombarded with crash reports that appear to be related to our installer, which is a WiX3 project with separate outputs for x86 and x64 builds. These have been an ongoing problem that I always thought were fixed, only to find out that they were still lurking. The product itself is a collection of binaries that communicate with each other via .Net remoting, including a Windows Service and a small COM component that is loaded as an addon in another app. The service runs as SYSTEM, the COM piece runs in a low-rights context, while the other pieces run in normal user contexts. Other pieces include an third-party COM object library DLL and a shared DLL with the .net Remoting interfaces. I've observed flat-out weird behavior with MSI, particularly on version upgrades. Between MS' anal strong-name implementation (specifically, the exact version check before loading a given assembly), a documented WiX/MSI bug that sees critical files erased on upgrades (essentially, if a file in the upgrade MSI has the same version number as the existing install, that file is deleted), and having to work around Wow64 virtualization (x86 MSI can only write to registry/HD locations via Wow64, yet x64 MSIs cannot run on x86 computers...), I am about ready to trash the whole thing and port it over to a different install system. What I am looking for on tips + tricks, techniques, or suggestions on how to properly do things so that I am not fighting with Windows Installer's twisted sense of logic. I am tired of fighting with WiX/MSI/Windows Installer. All it needs to do is place files and registry keys where I tell it to, upgrade them when appropriate, and don't delete anything until the user uninstalls. Instead, dependencies are deleted willy-nilly, bringing up a whole bunch of uncatchable exceptions (can't wrap a try{} block around function declarations) and GPF'ing the whole app. I am particularly interested in 'best practices' and examples regarding shared and dependency DLLs, and any tips on making sure if a file needs to go to GAC, that it actually goes to the GAC and stays there until it is appropriate to remove it. Thanks! Tom

  Read the article

• How does [self.tableView reloadData] know what data to reload?

  - by Scott Pendleton

  It bugs me to death that my viewcontroller, which happens to be a tableViewController, knows without being told that its property that is an NSArray or an NSDictionary holds the data that is to be loaded into the table for display. Seems like I should explicitly say something like: [self.tableView useData:self.MyArray]; Because, THAT'S WHAT I WANT TO DO! I want to have more than one array inside my tableViewController, and switch between one and the other programmatically. Please do not give me an answer like: "Never mind what you want to do, just set up two different tableViewControllers." No. I want to do it my way. I notice that when a tableViewController makes use of a searchViewController, you can do this: if (tableView == self.searchDisplayController.searchResultsTableView) { YES! I have even been able to do this: self.tableView = self.searchDisplayController.searchResultsTableView; [self.tableView reloadData]; But nowhere can I find how to set self.tableView back to the main datasource! I'm so tired of sifting, sifting through code for incomplete nuggets of enlightenment. Allow me to understate that Apple's documentation is grossly inadequate. It's astounding that so many slick iPhone programs came to be created. People said that once I went Mac, I'd never go back to Windows. Well, I'm anything but a convert.

  Read the article

• Eclipse Blackberry Preprocessor Not Working?

  - by Jessica

  I've already followed the directions @ http://stackoverflow.com/questions/1383277/using-preprocessor-directives-in-blackberry-jde-plugin-for-eclipse for making sure the blackberry plugin preprocessing hook is (theoretically) enabled. I'm using Eclipse 3.5.1 with Blackberry Plugin 1.1 with BB SDKs 4.7.0 and 4.6.0. I have my preprocessor defines set (and I've tried in both the Project's Blackberry Properties as well as the Workspace Blackberry Build settings), and checked their capitalization and spelling carefully too. I'm fairly confident the actual code to say "this stuff should be preprocessed" is good, because including/excluding preprocessed code seems to work fine on command line builds: //#preprocess --- at beginning of file and then code blocks like this throughout: //#ifndef jde_4_7 /* //#endif //#ifdef jde_4_7 import net.rim.device.api.ui.TouchEvent; //#endif //#ifndef jde_4_7 */ //#endif So what I can't figure out what else could be wrong that would cause Eclipse to not compile in my preprocessed code unless I remove the comments that are supposed to prevent the touch code from building into a build for blackberries that don't support touch. At one point it used to work (and no I haven't updated Eclipse), but sometime in the last couple of weeks it seemed to just stop working. And I'm getting kind of tired of the error-prone process of searching for ifdefs and manually commenting/uncommenting touch code and looking for a better solution while I do testing and initial development requiring testing both touch and non-touch functionality. Any other ideas on what could be wrong or how to fix it?

  Read the article

• Drupal vs ExpressionEngine for any kind of project from simple commercial site to complex ecommerce

  - by artmania

  Hi friends... So far I've been using custom cms. lately I developed own cms with CodeIgniter, and I'm actually happy. But recently I take more design and front-end development works than deep development projects. I actually also prefer so... I have many things to do with custom cms, also some security issues, etc. I'm kind of tired of doing everyhing custom, also I want to give more time to my family... Recently I'm seriously considering to go for a ready cms, and develop custom plugins when project need sth specific. This cms should be very flexible to implement any layout. also secured (since i had some hack problems with my custom cms!) I googled so much about this. As a result 2 options: Drupal Expression Engine opensource or licensed matter is not an issue for me at all. I just consider to go for a cms that I can use for any kind of project from simple 4-5 pages company sites to complicated projects like hotels directory, ecommerce portals, etc... As I found out; EE is more userfriendly and doesnt hassle about implementing custom layout as much as Drupal does. Also EE use CodeIgniter that I'm familiar. on the other hand I found out that Drupal is 10000% flexible, we can do anything with that (requires good php knowledge), extremely powerful and has many plugins... So I can't decide!! I want to go for a cms that I will use for looooong years from now on with no problems to implement any kind of project. So which one do you recommend? Appreciate your helps! thanks a lot... Edited: http://expressionengine.com/ee2_sneak_preview/#cost this Commercial License $299.95 is for 1 setup? So I need to purchase new licence for each project? Nothing like I pay once, and use the cms for as many project as I want?

  Read the article

• How to retrieve TextBlock from DataGridColumnHeader HeaderStyle in Silverlight

  - by Xin

  As in Silverlight I can't bind directly to a DataGridColumn's property, in order to dynamically change the text of the column header, I have to write the following code using HeaderStyle. <data:DataGridTextColumn.HeaderStyle> <Style TargetType="dataprimitives:DataGridColumnHeader"> <Setter Property="ContentTemplate"> <Setter.Value> <DataTemplate> <TextBlock Text="{Binding Resource.ClientName, Mode=OneWay}"/> </DataTemplate> </Setter.Value> </Setter> </Style> </data:DataGridTextColumn.HeaderStyle> </data:DataGridTextColumn> My problem is that now I need to get the Name of the TextBlock from grid.Columns[index]. Is there any way I can do this? I tired to use VisualTreeHelper but since DataGridColumn is not a FrameworkElement it will throw me an error... Any help would be greatly appreciated! Xin

  Read the article

• Request.IsAuthenticated problem with Cache in ASP.NET

  - by Julien

  Hello guys or girls..! I'm new in ASP.NET and I have a problem... When I want to cache I View or an Action like this : <%@ Page title="" language="C#" masterpagefile="~/Views/Shared/MemberHome.Master" inherits="System.Web.Mvc.ViewPage<IndexViewData>" %> <%@ OutputCache duration="400" varybyparam="divId;regionId;page" %> I know that it cache all data in my page ... But in my page I have a condition like this : <% if(Request.IsAuthenticated) { %> <a href="/fr/Advertiser/Search"><img src="/content/images/v_2/bot.jpg" alt="Entreprises liées à vos passions" title="Entreprises liées à vos passions" /></a> <% } else { %> <a href="/fr/Advertiser/OpenSearch"><img src="/content/images/v_2/bot.jpg" alt="Entreprises liées à vos passions" title="Entreprises liées à vos passions" /></a> <% } %> I dont want to cache this variable : Request.IsAuthenticated ... because some result depend of this condition ... I try the donut caching by scottgu's but it return (I think) just some text not a bool ... http://weblogs.asp.net/scottgu/archive/2006/11/28/tip-trick-implement-donut-caching-with-the-asp-net-2-0-output-cache-substitution-feature.aspx Now I'm tired to try anything that come to my mind .. can you help me pleaseee! :) Julien.

  Read the article

• Need to replace 3rd party WinForm controls, what's the closet WPF equivalent?

  - by Refracted Paladin

  I am tired of Windows Forms...I just am. I am not trying to start a debate on it I am just bored with it. Unfortunately we have become dependent on 4 controls in DevExpress XtraEditors. I have had nothing but difficulties with them and I want to move on. What I need now is what the closet replacement would be for the 4 controls I am using. Here they are: LookUpEdit - this is a dropdown that filters the dropdown list as you type. MemoExEdit - this is a textbox that 'pops up' a bigger area when it has focus CheckedComboBoxEdit - this is a dropdown of checkboxes. CheckedListBoxControl - this is a nicely columned list box of checkboxes This is a LOB app that has tons of data entry. In reality, the first two are nice but not essential. The second two are essential in that I would either need to replicate the functionality or change the way the users are interacting with that particular data. I am looking for help in replicating these in a WPF environment with existing controls(codeplex etc) or in straight XAML. Any code or direction would be greatly appreciated but mostly I am hoping to avoid any commercial 3rd party WPF and would instead like to focus on building them myself(but I need direction) or using Codeplex

  Read the article

• json_encode with mysql content and umlauts in utf-8

  - by i3rutus

  Hey, i feel my beard growing while trying to find out the Problem here. Basic the Problem is, that Umlauts/Special Signs äöß ... don't work. I guess everyone is sick and tired of that questions but all the solutions found online don't seem to work. Im having utf-8 content in a utf-8 Mysql Database. I feel the Problem ist somewhere in the Database connection but i just can't figure out. character_set_client utf8 character_set_connection utf8 character_set_database utf8 character_set_filesystem binary character_set_results utf8 character_set_server latin1 character_set_system utf8 Im not sure if the problem is the latin1 for character_set_server because im not into that mysql stuff. I also dont know how to change cause i can't access the mysql server's config files. Whatever is confusing me, that if i get my results from the Database and echo it, print_r gives the right result. ini_set('default_charset','utf-8'); header('Content-Type: text/plain; > charset=utf-8'); Firefox says char encode is utf-8 but if when i output: print_r($listnew); echo json_encode($listnew[5]); print_r results everything right but json_encode does wrong. print_r: [5] => Array ( [id] => 5 [data] => U-Bahnhof Theresienstraße [size] => 17 ) json_encode: {"id":5,"data":"U-Bahnhof Theresienstra\u00dfe","size":17} i know json_encode needs a utf-8 string to work properly there and i feel im having a encode trouble here but i just can't firgure out where it is. Any help would be appreciated, thanks in advance. i3

  Read the article

• Installing SQLServer 2005 on Windows 7 64bit

  - by Mostafa

  Hi , It's 3 days I'm trying to install SqlServer 2005 under Windows 7 64 bit on my machine . First let me tell you what I've done and what I've got till now . 1-I Installed Windows 7 64 Bit on my computer 2-I tried to install SQl Server 2005 "Developer Edition" 2.1 But in "System Configuration Check" Page i recieved 2 warning , One for "IIS Feature Requirement" and another for "ASP.NET Version Registration Rquired" . 2.1.1 . I installed "Internet Information Services" from "Turn Windows features on or off" section in control panel 2.1.2 I Enabled reporting service 32 bit from "Inetpub= AdminScripts = adsutil.vbs 2.2 At this stage There was no waring in System Configuration Check 3- So I installed SQl Server 2005 Developer Edition By all default settings 4- I installed Sql Server 2005 Service Pack 3 64 bit Now when when i run "Management Studio" There is no name in "Server name" section . I typed my Computer name Or "." and i got this Error : A network -related instance-specific error occurred while establishinga connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (Provider: Named Pipes Provider , error :40 - Could not open a connection to SQL Server ) ( Microsoft SQL Server , Error :2) . I googled some for this Error and some people said follow this instruction: Startsql server 2005Configuration toolsSql Server Surface Configuration AreaSurface Area Configuration for services and Connections But i got this Error : No SQl SErver 2005 Components were found on the specified computer . Either no components are installed , or you are not a administrator on this computer (SQLSAC) I'm really tired because of that , and i don't know what's wrong with this . Some more information : I have no additonal software on my computer , like Antivirus or Proxy I tried all step with "Standard Edition" either , but no difference My user is Administrator I tried more than 5 times all those steps including re-installing Windows 7 . Please help me , I'm losing all my hair

  Read the article

• How to get a file path from c drive in android

  - by Thomas Mathew

  I was trying to extract the content of a pdf file and display its content in android. I tired the code in java and it worked.But when i am coding it in android, its not displaying anything. I think, its not getting the file path. Is there any way by which i could get a file stored in c drive and store its path in a string? The code is given below: public class hello extends Activity { /** Called when the activity is first created. */ private static String INPUTFILE = "FirstPdf.pdf"; String str; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); try { Document document = new Document(); document.open(); PdfReader reader = new PdfReader(INPUTFILE); int n = reader.getNumberOfPages(); str=PdfTextExtractor.getTextFromPage(reader, 2); } catch (IOException e) { //e.printStackTrace(); } catch (InterruptedException e) { e.printStackTrace(); } TextView tv = new TextView(this); tv.setText(str); setContentView(tv); } } I would be very grateful if the problem is solved.

  Read the article

• SDL_image/C++ OpenGL Program: IMG_Load() produces fuzzy images

  - by Kami

  I'm trying to load an image file and use it as a texture for a cube. I'm using SDL_image to do that. I used this image because I've found it in various file formats (tga, tif, jpg, png, bmp) The code : SDL_Surface * texture; //load an image to an SDL surface (i.e. a buffer) texture = IMG_Load("/Users/Foo/Code/xcode/test/lena.bmp"); if(texture == NULL){ printf("bad image\n"); exit(1); } //create an OpenGL texture object glGenTextures(1, &textureObjOpenGLlogo); //select the texture object you need glBindTexture(GL_TEXTURE_2D, textureObjOpenGLlogo); //define the parameters of that texture object //how the texture should wrap in s direction glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT); //how the texture should wrap in t direction glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT); //how the texture lookup should be interpolated when the face is smaller than the texture glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); //how the texture lookup should be interpolated when the face is bigger than the texture glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); //send the texture image to the graphic card glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, texture->w, texture->h, 0, GL_RGB, GL_UNSIGNED_BYTE, texture-> pixels); //clean the SDL surface SDL_FreeSurface(texture); The code compiles without errors or warnings ! I've tired all the files formats but this always produces that ugly result : I'm using : SDL_image 1.2.9 & SDL 1.2.14 with XCode 3.2 under 10.6.2 Does anyone knows how to fix this ?

  Read the article

• FasterCSV Parsing issue?

  - by Schroedinger

  G'day guys, I'm currently using fastercsv to construct ActiveRecord elements and I can't for the life of me see this bug (tired), but for some reason when it creates, if in the rake file i output the column I want to save as the element value, it puts out correctly, as either a Trade or a Quote but when I try to save it into the activerecord, it won't work. FasterCSV.foreach("input.csv", :headers => true) do |row| d = DateTime.parse(row[1]+" "+row[2]) offset = Rational(row[3].to_i,24) o = d.new_offset(offset) t = Trade.create( :name => row[0], :type => row[4], :time => o, :price => row[6].to_f, :volume => row[7].to_i, :bidprice => row[10].to_f, :bidsize => row[11].to_i, :askprice => row[14].to_f, :asksize => row[15].to_i ) end Ideas? Name and Type are both strings, every other value works except for type. Have I missed something really simple?

  Read the article

• Access denied error on select into outfile using Zend

  - by Peter

  Hi, I'm trying to make a dump of a MySQL table on the server and I'm trying to do this in Zend. I have a model/mapper/dbtable structure for all my connections to my tables and I'm adding the following code to the mappers: public function dumpTable() { $db = $this->getDbTable()->getAdapter(); $name = $this->getDbTable()->info('name'); $backupFile = APPLICATION_PATH . '/backup/' . date('U') . '_' . $name . '.sql'; $query = "SELECT * INTO OUTFILE '$backupFile' FROM $name"; $db->query( $query ); } This should work peachy, I thought, but Message: Mysqli prepare error: Access denied for user 'someUser'@'localhost' (using password: YES) is what this results in. I checked the user rights for someUser and he has all the rights to the database and table in question. I've been looking around here and on the net in general and usually turning on "all" the rights for the user seems to be the solution, but not in my case (unless I'm overlooking something right now with my tired eyes + I don't want to turn on "all" on my production server). What am I doing wrong here? Or, does anybody know a more elegant way to get this done in Zend?

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >