Search Results

Search found 9101 results on 365 pages for 'sub arrays'.

Page 18/365 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Compare array in loop

    - by user3626084
    I have 2 arrays with different sizes, in some cases one array can have more elements than the other array. However, I always need to compare the arrays using the same id. I need to get the other value with the same id in the other array I have tried this, but the problem happens when I compare the two arrays in a loop when the other array has more elements than one, because duplicate the loop and data , and it does not work. Here is what I've tried: <?php /// Actual Data Arrays /// $data_1=array("a1-fruits","b1-apple","c1-banana","d1-chocolate","e1-pear"); $data_2=array("b1-cars","e1-eggs"); /// for ($i=0;$i<count($data_1);$i++) { /// Explode ID $data_1 /// $exp_id=explode("-",$data_1[$i]); /// for ($h=0;$h<count($data_2);$h++) { /// Explode ID $data_2 /// $exp_id2=explode("-",$data_2[$h]); /// if ($exp_id[0]=="".$exp_id2[0]."") { print "".$data_2[$h].""; print "<br>"; } else { print "".$data_1[$i].""; print "<br>"; } /// } /// } ?> I want the following values : "a1-fruits" "b1-cars" "c1-banana" "d1-chocolate" "e1-eggs" Yet, I get this (which isn't what I want): a1-fruits a1-fruits b1-cars b1-apple c1-banana c1-banana d1-chocolate d1-chocolate e1-pear e1-eggs I tried everything I know and try to understand how I can do this because I don't understand how to compare these two arrays. The other problem is when one size has more elements than the other, the comparison always gives an error. I FIND THE SOLUTION TO THIS AND WORKING IN ALL : <?php /// Actual Data Arrays /// $data_1=array("a1-fruits","b1-apple","c1-banana","d1-chocolate","e1-pear"); $data_2=array("b1-cars","e1-eggs","d1-chocolate2"); /// for ($i=0;$i<count($data_1);$i++) { $show="bad"; /// Explode ID $data_1 /// $exp_id=explode("-",$data_1[$i]); /// for ($h=0;$h<count($data_2);$h++) { /// Explode ID $data_2 /// $exp_id2=explode("-",$data_2[$h]); /// if ($exp_id2[0]=="".$exp_id[0]."") { $show="ok"; print "".$data_2[$h]."<br>"; } /// } if ($show=="bad") { print "".$data_1[$i].""; print "<br>"; } /// } ?>

    Read the article

  • How to iterate & retrieve values from NSArray of NSArrays of NSDictionaries

    - by chinjazz
    I'm stumpped on how iterate and get values for an Array of Arrays of NSDictionaries (different classes/entities). Here's what I'm currently doing: 1) Constructing two separate arrays of NSDictionaries (different entities) 2) Combining both arrays with: NSMutableArray *combinedArrayofDicts = [[NSMutableArray alloc] initWithObjects: sizesArrayOfDicts, wishListArrayOfDicts , nil]; 3) Then archive combinedArrayofDicts : NSData *dataToSend = [NSKeyedArchiver archivedDataWithRootObject:combinedArrayofDicts]; 4) Transmit over GameKit [self.session sendDataToAllPiers:dataToSend withDataMode: GKSendDataReliable error:nil]; 5) How would I manage traversing thru this array on the receiving end? I want to fetch values by for each class which is key'ed by classname: Here's how it looks via NSLog (2 Sizes Dicts, and 1 Wishlist Dict) Printing description of receivedArray: <__NSArrayM 0xbc65eb0>( <__NSArrayM 0xbc651f0>( { classname = Sizes; displayOrder = 0; share = 1; sizeType = Neck; value = "13\" or 33 (cm)"; }, { classname = Sizes; displayOrder = 0; share = 1; sizeType = Sleeve; value = "34\" or 86 (cm)"; } ) , <__NSArrayM 0xbc65e80>( { classname = Wishlist; detail = ""; displayOrder = 0; imageString = ""; latitude = "30.33216666666667"; link = "http://maps.google.com/maps?q=loc:30.332,-81.41"; longitude = "-81.40949999999999"; name = bass; share = 1; store = ""; } ) ) (lldb) In my for loop I'm issuing this: NSString *value = [dict objectForKey:@"classname"]; and get an exception: * Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSArrayM objectForKey:]: unrecognized selector sent to instance 0xbc651f0' Is this frowned upon as far as mixing object types in arrays of arrays?

    Read the article

  • I need to modify a program to use arrays and a method call. Should I modify the running file, the data collection file, or both?

    - by g3n3rallyl0st
    I have to have multiple classes for this program. The problem is, I don't fully understand arrays and how they work, so I'm a little lost. I will post my program I have written thus far so you can see what I'm working with, but I don't expect anyone to DO my assignment for me. I just need to know where to start and I'll try to go from there. I think I need to use a double array since I will be working with decimals since it deals with money, and my method call needs to calculate total price for all items entered by the user. Please help: RUNNING FILE package inventory2; import java.util.Scanner; public class RunApp { public static void main(String[] args) { Scanner input = new Scanner( System.in ); DataCollection theProduct = new DataCollection(); String Name = ""; double pNumber = 0.0; double Units = 0.0; double Price = 0.0; while(true) { System.out.print("Enter Product Name: "); Name = input.next(); theProduct.setName(Name); if (Name.equalsIgnoreCase("stop")) { return; } System.out.print("Enter Product Number: "); pNumber = input.nextDouble(); theProduct.setpNumber(pNumber); System.out.print("Enter How Many Units in Stock: "); Units = input.nextDouble(); theProduct.setUnits(Units); System.out.print("Enter Price Per Unit: "); Price = input.nextDouble(); theProduct.setPrice(Price); System.out.print("\n Product Name: " + theProduct.getName()); System.out.print("\n Product Number: " + theProduct.getpNumber()); System.out.print("\n Amount of Units in Stock: " + theProduct.getUnits()); System.out.print("\n Price per Unit: " + theProduct.getPrice() + "\n\n"); System.out.printf("\n Total cost for %s in stock: $%.2f\n\n\n", theProduct.getName(), theProduct.calculatePrice()); } } } DATA COLLECTION FILE package inventory2; public class DataCollection { String productName; double productNumber, unitsInStock, unitPrice, totalPrice; public DataCollection() { productName = ""; productNumber = 0.0; unitsInStock = 0.0; unitPrice = 0.0; } //setter methods public void setName(String name) { productName = name; } public void setpNumber(double pNumber) { productNumber = pNumber; } public void setUnits(double units) { unitsInStock = units; } public void setPrice(double price) { unitPrice = price; } //getter methods public String getName() { return productName; } public double getpNumber() { return productNumber; } public double getUnits() { return unitsInStock; } public double getPrice() { return unitPrice; } public double calculatePrice() { return (unitsInStock * unitPrice); } }

    Read the article

  • Pointing non-www to a spcific sub-directory

    - by Ben Sinclair
    I might be going about this all wrong so let me know if I am. I am creating software that allows people to sign up and have their own sub-domain on my website. So say my website is ben.com, they could have their own sub-domain called juice.ben.com. When they type their sub-domain juice.ben.com in their address bar, it will load the contents in a root directory. I have also set-up a .htaccess redirect to redirect www.ben.com to ben.com. Not sure if this matters with my question but I thought I'd mention it. Ok, so basically what I think I need to do is put the software they they've signed up to in the root directory. So when someone goes to juice.ben.com, they will be pointed to the root directory (I beleive I cans et-up wild card sub-domains with my host) and the software will then analyse their sub-domain and then display their account. Now, if someone just types in ben.com into their browser, I want it to show the contents of the ben.com/_website/ folder but still show in the address bar that they are still in the root directory. Hopefully I am making sense :) Is this possible with htaccess? If so, what do I need to do?

    Read the article

  • Using ruby's OptionParser to parse sub-commands

    - by rampion
    I'd like to be able to use ruby's OptionParser to parse sub-commands of the form COMMAND [GLOBAL FLAGS] [SUB-COMMAND [SUB-COMMAND FLAGS]] like: git branch -a gem list foo I know I could switch to a different option parser library (like Trollop), but I'm interested in learning how to do this from within OptionParser, since I'd like to learn the library better. Any tips?

    Read the article

  • How to Link Sub Taxonomy to products in wordpress

    - by rahul251
    I have created custom post types called Internal products I Have a page page-internal-products.php which list all the custom taxonomy for the Custom post type Internal product On clicking on the taxonomies takes me to a page which lists the sub taxonomies for the particular parent taxonomy for which i have created the page called taxonomy-internalproducts_categories.php On clicking on the sub taxonomy. I need to go to a page which lists all the products for this sub taxonomy. How can I achieve this?

    Read the article

  • SSRS 2008 Interactive Sorting in Sub-Report not working as expected

    - by Ray J
    I have a (parent) report that has a list. The details group of this list contains one sub-report. So basically if the list has 10 records (rows) the sub-report is executed 10 times. The problem seems to be with interactive sorting in the Sub-Report. It has 4 columns with interactive sorting enabled. When I run the parent report and try to sort columns SSRS "remembers" the previous sort column and sorts by multiple columns at the same time. For example if I sort by Col A then click to sort by Col B, SSRS will preserve the sorting of Col A (and the direction) and then apply the sorting to Col B. However I simply want to sort by Col B and do not want to Col A to be part of the sort. When I try this directly with the sub-report everything works as expected. Any ideas why this is happening?

    Read the article

  • Perl Hash Slice, Replication x Operator, and sub params

    - by user210757
    Ok, I understand perl hash slices, and the "x" operator in Perl, but can someone explain the following code example from here (slightly simplified)? sub test{ my %hash; @hash{@_} = (undef) x @_; } Example Call to sub: test('one', 'two', 'three'); This line is what throws me: @hash{@_} = (undef) x @_; It is creating a hash where the keys are the parameters to the sub and initializing to undef, so: %hash: 'one' = undef, 'two' = undef, 'three' = undef The rvalue of the x operator should be a number; how is it that @_ is interpreted as the length of the sub's parameter array? I would expect you'd at least have to do this: @hash{@_} = (undef) x length(@_);

    Read the article

  • Wrap Sub as Function for use in Lambda

    - by Luhmann
    I have a problem with VB and Moq. I need to call a verify on a Sub. Like so: logger.Verify(Function(x) x.Log, Times.AtLeastOnce) And my logger looks like this: Public Interface ILogger Sub Log() End Interface But with VB this is not possible, because the Log method is a Sub, and thereby does not produce a value. I don't want to change the method to be a function. Whats the cleanest way of working around this limitation and is there any way to wrap the Sub as a Function like the below? logger.Verify(Function(x) ToFunc(AddressOf x.Log)) I have tried this, but i get: Lambda Parameter not in scope

    Read the article

  • Amazon ec2 - WildCard Sub-Domain

    - by Sharanc25
    I'm running an ec2 instance on ubuntu running lamp stack. I configured my httpd.conf file to support wildcard sub-domain but it didn't work. My httpd.conf file NameVirtualHost * <VirtualHost *> DocumentRoot /www/example ServerName example.com ServerAlias *.example.com </VirtualHost> I tried all possible solutions but they didn't work. Finally I used amazon Route-53 to setup a wildcard DNS to redirect all *.example.com to example.com. My question is, Is it okay if I use Route-53 instead of httpd.conf file for wildcard Sub-Domain ? Is there an error in my httpd.conf file ? (Note: I used the same httpd.conf settings with another hosting provider and it worked perfectly there.) Additional Information : VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:80 is a NameVirtualHost default server example.com (/etc/apache2/httpd.conf:1) port 80 namevhost example.com (/etc/apache2/httpd.conf:1) port 80 namevhost ip-xx-xxx-xx-xxx.ec2.internal (/etc/apache2/sites-enabled/000-default:1) Syntax OK

    Read the article

  • Making an apache module work only for a particular sub domain

    - by Abhinav Upadhyay
    Hi everyone. I am not a regular webmaster , I am a student working on an internship project which is an Apache2 module, so my knowledge of Apache configuration is limited. I want to configure my module for a particular sub domain of the host server. Lets say I want my module to work only for onclick.localhost , then what are the directives required ? I want the module to be invoked only for the hosts/virtualhosts for which it has been configured explicitly. I know how to setup sub domains in Apache, so that's not a problem. Thanks.

    Read the article

  • IIS URL Rewrite - Redirect any HTTPS traffic to sub-domain

    - by uniquelau
    We have an interesting hosting environment that dictates all secure traffic must travel over a specific sub domain. E.g. http://secure.domain.com/my-page I'd like to handle this switch using URL Rewrite, i.e. at server level, rather than application level. My cases are: https://secure.domain.com/page = NO CHANGE, remains the same https://domain.com/page = sub-domain inserted, https://secure.domain.com/page https://www.domain.com/page = remove 'www', insert sub-domain In my mind the logic is: INPUT = Full Url = http://www.domain.com/page If INPUT contains HTTPS Then check Full URL, does it contain 'secure'? If YES do nothing, if no add 'secure' If INPUT contains 'www' remove 'www' The certificate is not a wild card (e.g. top level domain) and is issues to: https://secure.domain.com/ The website could also be hosted in a staging environment. E.g. https://secure.environment.domain.com/ I do not have control over 'environment' or 'domain' or the 'tld'. Laurence - Update 1, 19th August So as mentioned below, the trick here is to avoid a redirect loop that could drive anyone well loopy. This is what I propose: One rule to force certain traffic to the secure domain: <rule name="Force 'Umbraco' to secure" stopProcessing="true"> <conditions logicalGrouping="MatchAll"> <add input="{REQUEST_URI}" pattern="^/umbraco/(.+)$" ignoreCase="true" /> <add input="{HTTP_HOST}" negate="true" pattern="^secure\.(.+)$" /> </conditions> <action type="Redirect" url="https://secure.{HTTP_HOST}/{R:0}" redirectType="Permanent" /> </rule> Another rule, that then removes the secure domain, expect for traffic on the secure domain. <rule name="Remove secure, expect for Umbraco" stopProcessing="true"> <match url="(.*)" ignoreCase="true" /> <conditions logicalGrouping="MatchAll"> <add input="{HTTP_HOST}" pattern="^secure\.(.+)$" /> <add input="{REQUEST_URI}" negate="true" pattern="^/umbraco/(.+)$" ignoreCase="true" /> </conditions> <!-- Set Domain to match environment --> <action type="Redirect" url="http://staging.domain.com/{R:0}" appendQueryString="true" redirectType="Permanent" /> </rule> This works for a single directory or group of files, however I've been unable to add additional logic into those two rules. For example you might have 3 folders that need to be secure, I tried adding these as Negate records, but then no redirection happens at all. Hmmm! L

    Read the article

  • Directory and Sub Directory listing

    - by shekhar
    I am trying to list the directory name (only name, not full path) and sub directories (only name, not full path) inside it. There is only one level of sub directories. I used below script to do this: @echo off&setlocal enableextensions for /r "PATH" %%G in (.) do ( Pushd %%G for %%* in (.) do set MyDir=%%~n* echo %MyDir% popd ) endlocal&goto :eof The problem with the above script is that it is showing root directory with the full path. How can I just make it show the directories in relation to the one I am working in?

    Read the article

  • Fatal error: Cannot use string offset as an array

    - by learner
    Array ( [0] = Array ( [auth_id] = 1 [auth_section] = Client Data Base [auth_parent_id] = 0 [auth_admin] = 1 [sub] = Array ( [0] = Array ( [auth_id] = 2 [auth_section] = Client Contact [auth_parent_id] = 1 [auth_admin] = 1 ) ) ) [1] => Array ( [auth_id] => 6 [auth_section] => All Back Grounds [auth_parent_id] => 0 [auth_admin] => ,4 [sub] => Array ( [0] => Array ( [auth_id] => 7 [auth_section] => Edit Custom [auth_parent_id] => 6 [auth_admin] => 1 ) ) ) [2] => Array ( [auth_id] => 20 [auth_section] => Order Mail [auth_parent_id] => 0 [auth_admin] => 1 [sub] => ) } When I process the sub inner array it shows this error how can I avoid that :)

    Read the article

  • Variable number of two-dimensional arrays into one big array

    - by qlb
    I have a variable number of two-dimensional arrays. The first dimension is variable, the second dimension is constant. i.e.: Object[][] array0 = { {"tim", "sanchez", 34, 175.5, "bla", "blub", "[email protected]"}, {"alice", "smith", 42, 160.0, "la", "bub", "[email protected]"}, ... }; Object[][] array1 = { {"john", "sdfs", 34, 15.5, "a", "bl", "[email protected]"}, {"joe", "smith", 42, 16.0, "a", "bub", "[email protected]"}, ... }; ... Object[][] arrayi = ... I'm generating these arrays with a for-loop: for (int i = 0; i < filter.length; i++) { MyClass c = new MyClass(filter[i]); //data = c.getData(); } Where "filter" is another array which is filled with information that tells "MyClass" how to fill the arrays. "getData()" gives back one of the i number of arrays. Now I just need to have everything in one big two dimensional array. i.e.: Object[][] arrayComplete = { {"tim", "sanchez", 34, 175.5, "bla", "blub", "[email protected]"}, {"alice", "smith", 42, 160.0, "la", "bub", "[email protected]"}, ... {"john", "sdfs", 34, 15.5, "a", "bl", "[email protected]"}, {"joe", "smith", 42, 16.0, "a", "bub", "[email protected]"}, ... ... }; In the end, I need a 2D array to feed my Swing TableModel. Any idea on how to accomplish this? It's blowing my mind right now.

    Read the article

  • Java: creating objects of arrays with different names at runtime and accessing/updating them

    - by scriptingalias
    Hello, I'm trying to create a class that can instantiate arrays at runtime by giving each array a "name" created by the createtempobjectname() method. I'm having trouble making this program run. I would also like to see how I could access specific objects that were created during runtime and accessing those arrays by either changing value or accessing them. This is my mess so far, which compiles but gets a runtime exception. import java.lang.reflect.Array; public class arrays { private static String temp; public static int name = 0; public static Object o; public static Class c; public static void main(String... args) { assignobjectname(); //getclassname();//this is supposed to get the name of the object and somehow //allow the arrays to become updated using more code? } public static void getclassname() { String s = c.getName(); System.out.println(s); } public static void assignobjectname()//this creates the object by the name returned { //createtempobjectname() try { String object = createtempobjectname(); c = Class.forName(object); o = Array.newInstance(c, 20); } catch (ClassNotFoundException exception) { exception.printStackTrace(); } } public static String createtempobjectname() { name++; temp = Integer.toString(name); return temp; } }

    Read the article

  • C++ Boolean problem (comparison between two arrays)

    - by Martin
    Hello! I have a problem to do. I already did some part of it, however I stuck and don't know exactly what to do next. The question: " You are given two arrays of ints, named A and B. One contains AMAXELEMENTS and the other contains BMAXELEMENTS. Write a Boolean-valued function that returns true if there is at least one point in A that is the same as a point in B, and false if there is no match between two arrays. " The two arrays are made up by me, I think if I know how to compare two arrays I will be fine, and I will be able to finish my problem. This is what I have so far (I changed AMAXELEMENTS to AMAX, and BMAXELEMENTS to BMAX): #include <iostream> using namespace std; int main(){ const int AMAX=5, BMAX=6; int i; bool c1=true,c2=false; int A[AMAX]={2,4,1,5,9}; int B[BMAX]={9,12,32,43,23,11}; for(i=0;i<BMAX;i++) if (B[i]==A[i]) // <---- I think this part has to look different, but I can't figure it out. cout<<c1<<endl; else cout<< c2<<endl; return 0; }

    Read the article

  • CPanel - Wild card SSL - How to point *.domain.com to one root and sub.domain.com to another root

    - by Harry Muscle
    I have a wildcard (*.domain.com) SSL certificate installed on my CPanel server. I have domain.com configured to point to /domain.com as its document root and use this wildcard SSL certificate. I also have sub.domain.com configured to point to /sub.domain.com as its document root. Btw, I have not explicitly configured configured sub.domain.com to use the wildcard SSL certificate. When I go to "http://sub.domain.com" it goes to the correct document root, however my problem is that when I go to "https://sub.domain.com" it goes to the incorrect root, it goes to the root configured for the wildcard SSL. I've been trying to find information on how to go about configuring sub.domain.com to use the SSL certificate and go to the correct document root, however, so far I haven't found anything concrete. Do I use the same steps that I used for configuring the certificate for domain.com, but use the same certificate again and specify dev.domain.com as the domain that this certificate is for (instead of *.domain.com)? Or is there something else I should be doing? This is a production server, so I don't want to play around too much. I'm hoping to find the correct information before proceeding.

    Read the article

  • Multidimensional arrays in VB.NET 2010

    - by matt_t
    Is there any way to create a multidinensional array that contains arrays of different lengths (similar to nesting arrays of different lengths in python). Because if I were to declare a variable Dim accounts(2,2) As Integer all 1D arrays at each dimension have the same length. Is there any way to create an array so that this is not the case? e.g The above code would create an array like this: [[0,0],[0,0]] but would it be possible to create this: [[0,0],[0,0,0]] Apologies for the poor explanation but I cannot think of any better ways to explain.

    Read the article

  • Sun Grid Engine (SGE) / limiting simultaneous array job sub-tasks

    - by wfaulk
    I am installing a Sun Grid Engine environment and I have a scheduler limit that I can't quite figure out how to implement. My users will create array jobs that have hundreds of sub-tasks. I would like to be able to limit those jobs to only running a set number of tasks at the same time, independent of other jobs. Like I might have one array job that I want to run 20 tasks at a time, and another I want to run 50 tasks at a time, and yet another that I'm fine running without limit. It seems like this ought to be doable, but I can't figure it out. There's a max_aj_instances configuration option, but that appears to apply globally to all array jobs. I can't see any way to use consumable resources, as I'd need a "complex attribute" that is per-job, and that feature doesn't seem to exist. It didn't look like resource quotas would work, but now I'm not so sure of that. It says "A resource quota set defines a maximum resource quota for a particular job request", but it's unclear if an array job's sub-tasks' resource requests will be aggregated for the purposes of the resource quota. I'm going to play with this, but hopefully someone already knows outright.

    Read the article

  • Visual Studio XSD Tool: Generate Collections Rather Than Arrays

    - by senfo
    I generated some C# classes from an XSD using the Visual Studio XSD utility and it generated arrays for storing a collection of elements, rather than one of the built-in generic Collection<T> (or related) classes. None of the command line parameters mentioned in xsd /? mention anything about generating collections rather than arrays, but I know that this can be done with web service proxy classes that Visual Studio generates, so I figured it must be possible. Does anybody know how to have the XSD utility generate collection classes rather than arrays?

    Read the article

  • Only compiles as an array of pointers, not array of arrays

    - by Dustin
    Suppose I define two arrays, each of which have 2 elements (for theoretical purposes): char const *arr1[] = { "i", "j" }; char const *arr2[] = { "m", "n" }; Is there a way to define a multidimensional array that contains these two arrays as elements? I was thinking of something like the following, but my compiler displays warnings about incompatible types: char const *combine[][2] = { arr1, arr2 }; The only way it would compile was to make the compiler treat the arrays as pointers: char const *const *combine[] = { arr1, arr2 }; Is that really the only way to do it or can I preserve the type somehow (in C++, the runtime type information would know it is an array) and treat combine as a multidimensional array? I realise it works because an array name is a const pointer, but I'm just wondering if there is a way to do what I'm asking in standard C/C++ rather than relying on compiler extensions. Perhaps I've gotten a bit too used to Python's lists where I could just throw anything in them...

    Read the article

  • Excel VBA pass array of arrays to a function

    - by user429400
    I have one function that creates an array of arrays, and one function that should get the resulting array and write it to the spreadsheet. I don't find the syntax which will allow me to pass the array of arrays to the second function... Could you please help? Here is my code: The function that creates the array of arrays: Function GetCellDetails(dict1 As Dictionary, dict2 As Dictionary) As Variant Dim arr1, arr2 arr1 = dict1.Items arr2 = dict2.Items GetCellDetails = Array(arr1, arr2) End Function the function that writes it to the spreadsheet: Sub WriteCellDataToMemory(arr As Variant, day As Integer, cellId As Integer, nCells As Integer) row = CellIdToMemRow(cellId, nCells) col = DayToMemCol(day) arrSize = UBound(arr, 2) Range(Cells(row, col), Cells(row + arrSize , col + 2)) = Application.Transpose(arr) End Sub The code that calls the functions: Dim CellDetails CellDetails = GetCellDetails(dict1, dict2) WriteCellDataToMemory CellDetails, day, cellId, nCells Thanks, Li

    Read the article

  • How can I get web pages from sub.a.com using url sub.b.com?

    - by Steven
    I have developed www.mysite.com. This site can be "integrated" into my partners website. What I do is to create partner1.mysite.com and repalce my header and footer with my partners header and footer and replace some CSS styling. This should make it as transaprent as possible for the user, so that they think they are still browsing my partners website. There are two ways I see how I can accomplish this: 1. My partner uses an IFrame to show the content from partner1.mysite.com 2. My partner creates sub domain and points it to my sub domain. Solution 1 is easy, but I'm not sure how search engines likes this, so I will try solution 2. QUESTION Can I use mysite.partner1.com but read content from partner1.mysite.com? I don't want to forward / redirect users to partner1.mysite.com. It's important that the URL is mysite.partner1.com / mysite.partner1.com/some/page. Is this possible? For testing, I have Apache configuration more or less like this: NameVirtualHost 10.0.0.17 <VirtualHost 10.0.0.17> DocumentRoot D:/wamp/www/mysite/ ServerName mysite.com </VirtualHost> <VirtualHost 10.0.0.17> DocumentRoot D:/wamp/www/mysite/ ServerName site1.mysite.com </VirtualHost> // Since this is on my localhost, I also configure site1 here <VirtualHost 10.0.0.17> DocumentRoot D:/wamp/www/site1/ ServerName site1.com </VirtualHost> <VirtualHost 10.0.0.17> ServerName mysite.site1.com --> DO SOME SORT OF FORWARDING HERE <-- </VirtualHost>

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >