Search Results

Search found 16336 results on 654 pages for 'device admin'.

Page 180/654 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

  • Can I use an Apple AirPort Express as a wireless-to-wired bridge?

    - by Chris
    I have a wireless network using an Apple AirPort Extreme. That device is set up in my office and hooked up to the cable modem. I have a TV in another room which can accept a wired internet connection (not wireless enabled). Can I use an Apple AirPort Express's ethernet jack to create a wireless-to-wired bridge? If not, what device would I use to do the same thing?

    Read the article

  • Copying between 2 network devices

    - by Dave Rook
    My network has 3 devices - 1 PC and 2 other network devices (which could be PC, NAS, external hard drive etc) If I want to copy data from one network device to another network device from my PC (using the copy and paste method (i.e right click a file, select copy and then right click into the destination folder and click paste) and therefore not using any tools that could be built into the network devices for such a transaction), does the data get routed via my PC or use my systems resources?

    Read the article

  • Wireless USB devices compatible with Windows 7 64-bit

    - by BrynJ
    I want to upgrade my Vista 64-bit edition to Windows 7 64-bit, so I've installed and run the Windows 7 Compatibility Test. The only item that is being highlighted as incompatible is my Zyxel G-202 wireless usb network device. Does anyone know of a wireless USB device that is compatible with Windows 7 64-bit?

    Read the article

  • 2Wire USB Network Adapter Not Working With Windows 7

    - by Andrew
    I installed Windows 7 on a separate drive, and everything works fine, but I can't get the above network adapter to work properly. It's displayed in Device Manager as a USB device, and I have the driver that makes it function in Vista, but when I run the Driver Wizard and direct it to directory where I have the Vista driver, it almost immediately says "Can't install driver." Is there any work around to this?

    Read the article

  • Is ECC mandatory in SSD technology?

    - by Alexander Shcheblikin
    While shopping for an SSD I have noticed that some manufacturers promote their "Pro" models as the ones sporting ECC data protection. Those manufacturers do not mention ECC in their budget models descriptions. However, Wikipedia article on flash memory states that "NAND relies on ECC to compensate for bits that may spontaneously fail during normal device operation." So the question is does any SSD device use ECC behind the scenes for its normal operation and is that ECC "feature" just a marketing ploy?

    Read the article

  • Which twitter client can synchronize unread tweets?

    - by Tom Burger
    Right now I'm forced to read all the tweets in a single client on a single device (TweetDeck on my Android phone). If I would switch to another device and/or client, I would need to search for the last unread tweet, which is sometimes complicated (too many tweets). So, the question: Is there a client who can keep the status (read/unread) on tweets across multiple devices? My target systems would be now Android and MS Windows, but also Linux might be handy.

    Read the article

  • How do you change data from a qr code on a scanner [on hold]

    - by Malcolm Eaton
    I have a problem now with the QR bar codes on the Wheelie Bins we deliver. The scan was giving us the following .. RL0313550 Now due to some changes at the manufacturing plant they have had to add more data as follows. 1234567891,RL031550 We only need the "RL031550" can anyone let me know how to fix this. We use Intermec CN50 device with 2d Imager fitted, was hoping to fix this within the device settings.

    Read the article

  • What would cause the Graphic Equalizer in Windows Media Player 10 to be disabled/not available?

    - by creamcheese
    On XP, Windows Media Player 10 contains a Graphic Equalizer but I can't find any way to activate it. Could this be a codec issue or a hardware issue? I'm also not getting any sound at all from this computer but there are no apparent hardware device issues marked in Device Manager, nothing is muted, all volume levels are turned fully up (Windows Media Player and the Windows Volume Controller). Stumped!

    Read the article

  • How do I troubleshoot hardware issues related to a computer freeze/crash?

    - by KronoS
    What are some common guidelines and issues related to hardware being the issue of a computer crash? What should I look for and how do I troubleshoot these problems? What are some tools that are useful in diagnosing these hardware related crashes? I am looking to be able to isolate the problematic device with specific tools and guidelines. For example if device X is causing system failure how do I go about diagnosing it?

    Read the article

  • ASUS N45SF - play subwoofer with audio connected

    - by Jaroslav Bucko
    I have notebook ASUS N45SF. It comes with dedicated subwoofer, which is connected to separate audio jack. When I connect any audio device to audio jack, internal speakers remain silent, but subwoofer too. I want to let subwoofer play even with audio device connected to jack. Are there any drivers or settings in OS, which would eneble this behaviour? I have Win7/Ubuntu dualboot so OS doesnt matter. Thanks

    Read the article

  • How to stop Time Machine on Mac to use moveable disc?

    - by ablmf
    One of my friend recently bought a Mac and somehow when she connect her moveable disc to the computer, time machine took control of this device use it as backup device automatically. So she could not use the disc for other purpose any more. When we connect it to windows, it could not be recognize any more. How can we get it back under control?

    Read the article

  • Missing hvc0 in Ubuntu Lucid Xen DomU

    - by Joril
    I've just installed an Ubuntu Lucid 64bit image (from Stacklet) as a Xen DomU, running under Xen 3.2.1 on Centos 5.2 64bit. Everything is working fine, except my logs are flooded with: /dev/hvc0: No such file or directory I tried creating the device with mknod /dev/hvc0 c 229 0 but the message just changes to: /dev/hvc0: cannot open as standard input: No such device or address Any hint on what I could try? :(

    Read the article

  • Mouse won't work in XP on Latatitude

    - by Kyle Brandt
    I have a Latitude D630 Laptop with a Fresh Windows XP install that won't work with a generic external USB mouse. It recognizes the device has been put in but fails to install it. USB keyboards work fine I have tried restarting the laptop Tried starting the machine without the docking station and plugging directly into the laptop Don't have the original CD, but I installed drives from the Dell website until there were no ? icons Tried deleting the USB mouse device and plugging it again

    Read the article

  • Can this USB3 behaviour be anything else than a hardware failure?

    - by Jonas Wielicki
    While my motherboard is half a year old now (ASUS M5A99X EVO), I only recently made use of the USB3 boards (after purchase of USB3 external harddrive). However, I am encountering issues. I am running linux 3.6.7-4.fc16.x86_64. Initially, the harddrive worked fine with USB3 (amazing ˜160MB/s), but I had some problems after putting after putting the harddrive to sleep manually after use (backup) with hdparm -Y. After some time, the device disappears from lsusb and i see the following in dmesg: [ 1924.091107] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command. [ 1924.091114] xhci_hcd 0000:05:00.0: Assuming host is dying, halting host. [ 1924.091147] xhci_hcd 0000:05:00.0: HC died; cleaning up [ 1924.091233] usb 11-1: USB disconnect, device number 2 [ 1924.091272] sd 6:0:0:0: Device offlined - not ready after error recovery Testing with my (USB3 capable) notebook, I could not immediately reproduce the behaivour. I put the drive to sleep with hdparm -Y and waited for like an hour, but it was still listed in lsusb and responded after a few seconds delay when I tried after the hour of waiting. After an hour, on the desktop, the device would've usually vanished. Googling for this issue, I came across hints that playing around with IOMMU settings and upgrading the BIOS might help. I upgraded the BIOS and tried both with and without IOMMU enabled, got similar results. Most disturbing is, that one of the two USB 3.0 hubs sometimes also disappears from lsusb (or does not show up after boot at all). I've also heard that there are some hardware issues with ASUS USB3 ports. Applying mechanic force to the capble doesn't push the issue to one side or the other. Also, udev seems to reenumerate all devices if I plug the HDD into the USB 3.0 port without success (I can notice from my keyboard layout being changed to the default, which I do not use normally). The drive is externally powered and the external power supply is plugged in (it also stays powered when unplugging from USB, although it will spin down then). So before I try to return the board, I wanted to find out whether this can be anything else than a failure on the motherboard?

    Read the article

  • How to know which disk has failed on a Mirrored Raid? marked as DR0

    - by Saariko
    Our 2ndry DC, which is on a W2K8R2 Mirrored software raid has lost it's sync, and disk management displays the failed redundancy error How do I know which of the disks has failed? (beside to try and replace one - and see if it loads and syncs) On the device manager, under disks I see both disks, one of them has an icon of: Disable, while the other doesn't Event log displays an event id 7 - bad block on Hard disk DR0 The thing is that looking in device manager, both disks are located in '0' location, which is bizzare

    Read the article

  • How to know which disk has failed on a Mirrored Raid? marked as DR0 [migrated]

    - by Saariko
    Our 2ndry DC, which is on a W2K8R2 Mirrored software raid has lost it's sync, and disk management displays the failed redundancy error How do I know which of the disks has failed? (beside to try and replace one - and see if it loads and syncs) On the device manager, under disks I see both disks, one of them has an icon of: Disable, while the other doesn't Event log displays an event id 7 - bad block on Hard disk DR0 The thing is that looking in device manager, both disks are located in '0' location, which is bizzare

    Read the article

  • Is there a way to setup a hotspot with a domain name rather than IP address?

    - by WagnerMatosUK
    Basically I've setup a hotspot and its currently being accessed through an IP address. I'd like to use a hostname instead. This is for internal use only, meaning the ODROID device which is being used to as Access Point is connected to the internet via ethernet and only a few devices will access the AP. My setup details: Arch Linux on an ODROID U3 device, using hostapd and dhcp server. PS: I'm quite inexperienced with network so I might be missing something obvious here. Thanks in advance

    Read the article

  • Hosed Windows 7 permissons

    - by Anthony
    Here is the most interesting thing I've noticed since the problems started: If I go into a control panel/system module (in this case the Resource Monitor) that has a "Check Online" type option, Firefox (my default browser) opens right up without a problem. But if I just start Firefox from any shortcuts (start menu, desktop, etc), the Firefox process starts up (and the start menu icon starts glowing) only to end without notice a few seconds later. Possibly related: If I start up in Safe-Mode (w/o Networking, but haven't tried with yet), I can start up FF or Chrome just fine, but if I attempt to open Chrome normally, I get a permissions error. Opera and Safari seem to be okay (mostly). Safari crashes when I try to download any files. All of the above leads me to believe that some (but clearly not all) core files have messed up permissions. Or rather, that I no longer have permission. System still does, based on Firefox opening without fail when the system initiates it. I've run MS Forefront once in normal mode, Malwarebytes twice in normal mode and once in safe-mode. One trojan found and deleted, but the problem persists. Two other things worth mentioning: I accidentally duplicated my library... I thought I'd try to add the "Internet" folder to my start menu, next to music and downloads. The first advanced thing I tried was "create new library". I clearly misunderstood what this means. I thought it was a way to add virtual folders to the library (which I thought, in turn, would allow me to choose it as a link on the start menu), but instead it recreated my already existing user folder, AppData and all. I didn't notice this until today. Then I tried setting permissions for my User folder to full control, recursively... Confused but not giving up,I thought I could maybe create a shortcut to the NetHood folder manually, but instead got hit with an access denied error. So I tried to change the permission levels for all sub-folders to my user folder so that I had full control. I got several access denied errors along the way. At this point I gave up, went out, ended up caught in the rain and stuck on a friend's couch and showing up late for work the next day. Thanks for nothing, Microsoft. When I finally got home today (20 hours later), I noticed that Firefox was acting really strange. I tried opening Chrome to see if the problem was client side or server side, and instead got the above-mentioned "you don't have permission to open this program" alert. And I think that's the whole story. Oh, I also did a system restore, but not chose a point from this morning (an auto update), and it worked but the problem wasn't fixed. And then all the earlier restore points were gone. So the questions are: a) is there a way to set the admin and user privs back to "default"? b) would this, in anyone's expert opinion, fix the problems I'm having? c) how come being logged in as an admin isn't the same as being logged in with admin privs? It seems that half the time I have to do run as admin for fairy standard things because i'm being treated as me-theuser and not me-theadmin. Thanks for reading.

    Read the article

  • what version flash player has to be downloaded to play .swf files on Windows mobile 6.5?

    - by manraj82
    Hi guys, I'm trying to view websites with flash content in IE on a window mobile 6.5 device[HTC touch HD2].It says it has not got the right flash player.i tried to install the player but the device giving me an error,its saying the installer is not a valid pocket pc application. Has anyone else had a similar problem? If you have and sorted it could please advice me how to sort it? thanks

    Read the article

  • How to Mount a USB "Thumb" Drive as "Fixed" in Windows (For Indexing)

    - by AMissico
    I have over 8GB in my "Code Library" that I maintain on a 64GB ScanDisk Ultra Backup USB Device. Windows Search 4.0 (installed on Windows XP) can index removable drives, but Windows 7 (which uses Windows Search 4.0) cannot because the USB device identifies itself as a Removable drive and Windows 7 refuses to index removable drives. How can I mount the USB Thumb Drive as Fixed instead of Removable? All suggestions welcome and greatly appreciated.

    Read the article

  • How much resources are used during a RDP connection?

    - by KronoS
    Having recently installed a RDP app on my mobile device and got me wondering: this small device which has a limited amount of resources compared to the PC I'm connecting to, is still able to operate my remote machine to almost full capacity. With that, how much of the local machines resources are actually used in the connection to the remote machine? Also how much of the resources are used on the remote machine?

    Read the article

  • Toggle-able USB hub with more than one input and output?

    - by user74757
    I recently came across this product: http://ppa-usa.com/shared-network-hub-4-port-usb.html The only problem is, this is nearly opposite of what I need. Ideally, I'm looking for a USB hub-like device that can accept at least two devices for input, and toggle those two devices between at least 2 PC's. The hub linked above appears to be only able to accept one device. Does anyone know of such a product?

    Read the article

  • How to Modify Windows 7 Search to Index Removable Drives

    - by AMissico
    I have over 8GB in my "Code Library" that I maintain on a 64GB "ScanDisk Ultra Backup USB Device". Windows Search 4.0 (installed on Windows XP) can index removable drives, but Windows 7 (which uses Windows Search 4.0) cannot because the USB device identifies itself as a "Removable" drive and Windows 7 refuses to index removable drives. How can I modify Windows 7 Search to index removable drives? All suggestions welcome and greatly appreciated.

    Read the article

  • Mouse won't work in XP on Latitude

    - by Kyle Brandt
    I have a Latitude D630 Laptop with a Fresh Windows XP install that won't work with a generic external USB mouse. It recognizes the device has been put in but fails to install it. USB keyboards work fine I have tried restarting the laptop Tried starting the machine without the docking station and plugging directly into the laptop Don't have the original CD, but I installed drives from the Dell website until there were no ? icons Tried deleting the USB mouse device and plugging it again

    Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >