Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 181/421 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

  • Wifi problems after upgrading to 13.10

    - by Simon
    I just upgraded to Ubuntu 13.10, but since the upgrade I don't have internet access via wifi anymore. I can: See networks Connect to a network Ping myself (localhost, 192.168.0.103) I can't: Ping others (including other devices on the same wireless network, including the gateway/router) Resolve hosts Access any other external resource, whether on my own network or on the internet Using Wireshark, I noticed my computer is continuously sending ARP-requests like "Who has 192.168.0.1 [which is the gateway]? Tell 192.168.0.103". It doesn't get any replies though. When I ping another IP-address for which it knows the mac-address (from cache), it turns out a packet loss of 90% occurs, and even if a packet manages to arrive it takes around 3000ms. The output of route -n is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 eth1 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Before upgrading, wifi worked fine. Using other devices, wifi still works fine.Resetting the router didn't help. Ethernet still works after upgrading. Any suggestions? Update: I'm using the wl driver. Here's the relevant output of some commands: lspci | grep Wireless 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) cat /etc/modprobe.d/blacklist.conf [...] blacklist mac80211 blacklist brcm80211 blacklist cfg80211 blacklist lib80211_crypt_tkip blacklist lib80211 blacklist b43 cat /etc/rc.local sudo modprobe -r lib80211 sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_wep.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_tkip.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_ccmp.ko sudo modprobe wl exit 0 The last lines are probably how I got wireless working after the previous upgrade (wireless has been a problem after each upgrade). Update 2: added information about the exact hardware below. The hardware is an integrated device, so I ran lspci -nn | grep -i network. The output is: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

    Read the article

  • Column-Level Encryption in SQL Server

    Beginning with SQL Server 2005, column-level encryption and decryption capabilities were made available within the database, providing a solution for situations where one-off types of data need to be secured beyond your existing authorization, authentication or firewall settings. This article provides an overview and example of securing a column using native SQL Server cryptography functions. Join SQL Backup’s 35,000+ customers to compress and strengthen your backups "SQL Backup will be a REAL boost to any DBA lucky enough to use it." Jonathan Allen. Download a free trial now.

    Read the article

  • New sales kit for partners: Oracle Enterprise Manager 12c

    - by Javier Puerta
    Check out the latest Quick Reference Guides for Enterprise Manager 12c in the Knowledge Zone. The two-page Quick Reference Guide is designed to help partners uncover additional revenue opportunity by positioning Enterprise Manager in your sales engagement. Content includes elevator pitch for Enterprise Manager, tips on identifying target customers, qualifying questions to initiate customers discussion, supporting videos, references, and whitepapers for each customer scenario: Enterprise Manager 12c for Application Partners Enterprise Manager 12c for Hardware Partners Enterprise Manager 12c for Database Partners

    Read the article

  • Internet keep dropping in Ubuntu 12.04

    - by Kokuryuu
    I am having an issue with my Ubuntu, I keep getting "server not found" errors when I try to go online, I have tried pinging my DNS and Goggle, and it seems like no packets are dropped, but still my Internet is not working Also my other PCs in the house have working Internet connection. I am sure there is no firewall active here, also nothing on my router is blocking, and I checked cables. I have no issues in the same PC in Windows. It is only in Ubuntu. Any ideas?

    Read the article

  • Make a live USB of your installed ubuntu

    - by Eray Tuncer
    Okay let me clear my point. Lets assume I want to make a internet cafe-like system. Every user will be able to enter via only one user account to linux. However, I do not want them to leave anything behind. Whenever this ubuntu is booted, I want to this system remove their garbage. Why I mentioned the live USB is that I have seen that live usb or cd makes what I want but not exactly because I want to install some apps on it and make some confugration like firewall, permissions.

    Read the article

  • Performance Tune IBM DB2 z/OS Applications using Resource Constraint Analysis

    For the DB2 for z/OS professional the two most common systems tuning scenarios are tuning a DB2 data sharing group or tuning a series of application SQL statements. The data sharing group environment can involve multiple hardware installations and many other cross-system features and functions such as coupling facilities and management policies. Resource constraint analysis is a useful tool in both situations.

    Read the article

  • No wired and wireless connection found after upgrading 12.04

    - by ag108
    After upgrading 12.04 LTS, my wired connection works but no wireless connection found. I tried many suggestion for wireless connection on Ubuntu forum but nothing works for me. Now, maybe by mistake, I am also unable to connect Internet through wired connection. Now, (1) its says "No network devices available" and (2) in System Settings ? Hardware ? no additional driver icon is showing Please help. I don't know much about Ubuntu.

    Read the article

  • SharePoint Search Problem: The crawler could not communicate with the server.

    - by Clara Oscura
    This one was not easy to solve ... Error: The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured. Context: Some pages were not crawled (giving the above error) and, what is worse, all the sub content of that site was not crawled either! (the pages were the homepages of the site) Solution:The pages that could not be crawled due to this error contained a custom web part. This web part used default credentials for a given action. During crawling, the SP_Search account tried to perform this action but did not have the appropriate rights. This gave an error that stopped the crawling for the whole site. This blog helped me: http://patricklamber.blogspot.com/2010/04/why-might-moss-crawler-not-working.html

    Read the article

  • Unable to connect with IIS7 Manager to remote site

    - by saifkhan
    I was unable to connect with IIS7 manager to a remote site. I got on the phone with the hosting provider and they started troubleshooting. After a few minutes they went over all my settings, username, password...the whole shebang and I still couldn't. I then asked the support tech if any ports needed to be opened on my side and she said "ONLY PORT 80 NEEDS TO BE OPENED"... after a few more mins I decided to hop over to the IIS7 website but still couldn't find anything incicating specific ports, but I did came across a doc mentioning 8172 as a port IIS7 uses so I went to my firewall did the following OPEN PORT 8172 OUTBOUND That did the trick!...and the support tech updated her document accordingly.

    Read the article

  • Need to setup and access web disk for a hosting account

    - by mtk
    I am on linux(ubuntu 12.04) and have purchased a hosting space. In the cpanel, I selected nautilus for accessing web-disk and I was given a note: Note: In order for the Web Disk to work, you will need to allow port 2078 (SSL) or 2077 (non-SSL) on your computer's firewall. As, I am unable to connect to this, i.e. on entering the given url in Nautilus address bar, it says 'Connection closed'. So, I believe the above this quoted is not correctly configured. Please let me know, how to configure this? How to allow the given port access?

    Read the article

  • Ubuntu Server driver source catalog

    - by SRU IT
    Where do I find this drivers on my .iso image for the server software, or what is the ftp: location to download these files as those are the two options i am given on how to solve this issue. ubuntu-server 11.10, hardware: dell r210 what I am reading is that I am possibly missing 'mpt2sas' driver somewhere in this boot disc. I'm attempting to download a different version in the hopes that the mistake I made was downloading software meant for an AMD architecture.

    Read the article

  • can't get past the login screen

    - by Greg
    Using a brand-new install to a usb stick of 12.04 lts installed by Universal USB Installer 1.8.9.8. I log in as "ubuntu" with a blank password, the console appears for a second or two with text scrolling past and then it returns to the login page. I've used the same usb stick on several computers with the same results, so it doesn't appear to be a hardware/driver issue. I have not tried installing to the hard drive, because I wanted to try it out first.

    Read the article

  • Tune your Linux kernel with sysctl

    <b>Ghacks:</b> "Today most kernels work out of the box with most hardware. But there are times when you could squeeze out a bit more performance or even lighten your kernel on the fly. You can do that with the sysctl command."

    Read the article

  • Ubuntu 13.10 - Wifi not re-connecting after suspend

    - by Matthew
    I upgraded the other day from Ubuntu 13.04 to 13.10 on my ZaReason laptop, and the WiFi doesn't reconnect after suspend. In 13.04, pressing Fn+F2 turned network connections back on after suspend. The 'soft' wireless hardware switch. But in 13.10, that doesn't work, and trying to enable networking in the networking menu doesn't work either. So I have to restart every time. Any suggestions to make it work?

    Read the article

  • Which of these courses are the hardest and why?

    - by DSL Client
    Which of these courses are the hardest and why? What should I watch out for? Probability and Statistics for Computer Science Introduction to Software Engineering Data Structures and Algorithms Operating Systems Introduction to Theoretical Computer Science System Hardware Advanced Program Design with C++ Information Systems Security Computer Architecture Databases Web Programming Computer Graphics Digital System Design

    Read the article

  • How do I get Ubuntu One on Win7 to authenticate my login?

    - by Fred jones
    I just got a new computer running Windows 7 home premium, I used to have Ubuntu One working great on my Ubuntu desktop, but now, running win7, I know my login email address and password is correct, but it still says 'Authentication failed'. Googling the problem, looks like it may be because a device was removed from my list of devices, but the only device listed is my previous Ubuntu workstation, and nothing has been removed. I also checked the windows firewall and Ubuntu One is allowed on all interfaces on incoming and outgoing, and still authentication fails. Web login to my Ubuntu One account works fine.

    Read the article

  • New Sales Kit – Enterprise Manager 12c

    - by Cinzia Mascanzoni
    Check out the latest Quick Reference Guides for Enterprise Manager 12c in the Knowledge Zone. The two-page Quick Reference Guide is designed to help partners uncover additional revenue opportunity by positioning Enterprise Manager. Content includes elevator pitch for Enterprise Manager, tips on identifying target customers, qualifying questions to initiate customers discussion, supporting videos, references, and whitepapers for each customer scenario.• Enterprise Manager 12c for Application Partners • Enterprise Manager 12c for Hardware Partners• Enterprise Manager 12c for Database Partners

    Read the article

  • Why when I log in my two screens shows the same image automatically?

    - by forellana
    When I log in on my computer, first my two monitors shows their own part of a larger desktop, then automatically changes to the same image on both screens, but I don't want to happen this, Is there any configuration to avoid this? About my hardware: 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)

    Read the article

  • Nvidia Proprietary Drivers

    - by Ben
    I have an X79 motherboard and a GTX 670. I have tried to install every combination of Ubuntu 11.10, 12.04, 12.10, Linux Mint 13 and the Nvidia Driver 304.43, 295.xx, etc. I have read everything and pretty much tried everything...drivers from the site, PPAs, some random scripts, editing the xorg.conf file. It has been four days of futile effort. Should I just wait...or something? Has anyone gotten hardware like this to work?

    Read the article

  • Wireless broken after latest 12.04 update

    - by inderpaldeol
    I updated 12.04 yesterday and it broke my wireless connection. iwconfig lo no wireless extensions. eth0 no wireless extensions. l@ubuntu:~$ lspci|grep Network 03:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe In the hardware drivers, I see - rt3090sta is activated but currently not in use. WICD does not show wireless networks. Can someone help me please? Thanks id

    Read the article

  • Ubuntu Server Configuration -- Harddrive Partitioning

    - by black_bird
    Currently Ubuntu Server is telling me that when I'm making a new partition for Ubuntu Server on this NTFS 1TB HD that I currently have installed to the hardware, that the partition must be a minimum of 52% of the hard drive space or ~521GB. I'm almost positive that this will run into other data, as I have quite a bit of stuff on the hard drive currently. Can I not make a Ubuntu server partition on that hard drive at like 100GB or something? Why does it require so much?

    Read the article

  • Can my machine run Ubuntu( kubuntu | xubuntu | mint ) 12.04 WELL?

    - by Steve
    I have a 9 year old computer packing the hardware listed below. My question is, can I run 12.04 ( Ubuntu, Kubuntu, MINT or Xubuntu ) WELL? I was running Ubuntu 10.10 and I upgraded to 12.04 by going through each release via the update manager: 11.04 - 11.10 -12.04 During the installation process for 12.04 I saw an error message that there was an error installing and setting up part of the kernel. Later, when I tried installing a package in synaptic, I got another error message mentioning the kernel. When I rebooted, I got told somehting about my video and graphics was not configured properly and that I would have to do it manually ( like I know ). It gave me the option to enter the system in low graphics mode, but it just hanged. I had an old livecd of Xubuntu 10.10 around so I used that to get into my computer and copy data over to an external hard drive. I think tried to install Xubuntu 10.10 from the livecd, with the option "download updates" checked. The install process moved along a bit, then halted for about 5 hours. I rebooted my machine and tried the Xubuntu 10.10 installer WITHOUT the option to "download updates". The install completed in about 15 minutes. So, all of that is making me wonder if there is someting about 12.04 that does not like my hardware. I'm willing to try again, but only if I know I will not have to spend hours just to get to an error message and a hosed up system like I did last night. I also think I have a lot more RAM than is being reported in the output below. I had extra ram installed last year. I'm not good with the command line readouts, but there seems like there should be a lot more. I wasn't thrilled with Unity. I am willing to try Kubuntu 12.04. Will I run into the same problems? What is the highest version of a *ubuntu can I upgrade to? Thanks CPU Model: Intel(R) Pentium(R) 4 CPU 2.53GHz Frequency: 2533.223 MHz L2 Cache: 512 KB Bogomips: 5066.44 Numbering: family(15) model(2) stepping(7) Flags: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid RAM ~$ free -mt total used free shared buffers cached Mem: 1506 891 615 0 91 521 -/+ buffers/cache: 278 1227 Swap: 1609 0 1609 Total: 3116 891 2225 Video Card 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. V9180 Magic Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at f0000000 (32-bit, prefetchable) [size=64M] Expansion ROM at fe9e0000 [disabled] [size=128K] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb Motherboard Intel 845PE ATX 533FSB DDR333 USB2

    Read the article

  • How to handle brightness trouble on dell inspiron i14R-2265?

    - by den-javamaniac
    Hi. Recently I've installed ubuntu 10.10 32-bit on my dell inspiron i14r-2265, but it looks like brightness control is not working. I can change it "programmatically" (FN + brightness key), though actual screen brightness shows no effect. I've tried this advice but it didn't work for me. I actually have no idea how it works (if hardware is not responsive to software, the way I see it), so can someone suggest a solution please?

    Read the article

  • AMD to Introduce Netbook Chip in 2011

    <b>Hardware Central:</b> "Advanced Micro Devices plans to release a processor in its "Fusion" line that will be positioned for the netbook market, putting it in competition with the Intel Atom, and, to a lesser degree, the ARM processor."

    Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >