Search Results

Search found 17550 results on 702 pages for 'real world'.

Page 183/702 | < Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >

• Bad disk performance on HP DL360 with Smarty Array P400i RAID controller

  - by sarge

  I have a HP DL360 server with 4x 146GB SAS disks and a Smart Array P400i RAID controller with 256MB cache. The disks are in RAID 5 (3 disks + 1 hot spare). The server is running VMware ESX 3i. The disk write performance is really bad. Here are some numbers: ns1:~# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 3364 MB in 2.00 seconds = 1685.69 MB/sec Timing buffered disk reads: 18 MB in 3.79 seconds = 4.75 MB/sec ns1:~# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=125000 && sync" 125000+0 records in 125000+0 records out 1024000000 bytes (1.0 GB) copied, 282.307 s, 3.6 MB/s real 4m52.003s user 0m2.160s sys 3m10.796s Compared to another server those number are terrible: Dell R200, 2x 500GB SATA disks, PERC raid controller (disks are mirrored). web4:~# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 6584 MB in 2.00 seconds = 3297.79 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.79 MB/sec web4:~# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=125000 && sync" 125000+0 records in 125000+0 records out 1024000000 bytes (1.0 GB) copied, 35.2919 s, 29.0 MB/s real 0m36.570s user 0m0.476s sys 0m32.298s The server isn't very loaded and the VMware Infrastructure Client performance monitor is showing 550KBps average read and 1208KBps average write for the last 30 minutes (highest write rate: 6.6MBps). This has been a problem from the start. Any ideas?

  Read the article

• IIS 6.0 Application pool crash

  - by David

  One application pool on one of our webservers crashed and we found this in the Eventlog, where can we find more information about it? Event Type: Error Event Source: W3SVC Event Category: None Event ID: 1101 Date: 11/23/2009 Time: 10:57:55 AM User: N/A Computer: ID-WEB Description: The World Wide Web Publishing Service failed to create app pool 'Global'. The data field contains the error number. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: b7 00 07 80 ·..? Attempting to manually start the application pool gives the following in the event log: Event Type: Error Event Source: W3SVC Event Category: None Event ID: 1107 Date: 11/23/2009 Time: 3:53:13 PM User: N/A Computer: ID-WEB Description: The World Wide Web Publishing Service failed to modify app pool 'Global'. The data field contains the error number. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 05 40 00 80 .@.? We are running IIS 6.0 on a Windows server 2003 R2, 32bits.

  Read the article

• OpenVpn Iptables Error

  - by Mook

  I mean real newbie - linux here.. Please help me configuring my openvpn through iptables. My main goal here is to open port for regular browsing (80, 443), email (110, 25), etc just like isp does but i want to block p2p traffic. So I will need to open only few port. Here are my iptables config # Flush all current rules from iptables # iptables -F iptables -t nat -F iptables -t mangle -F # # Allow SSH connections on tcp port 22 (or whatever port you want to use) # iptables -A INPUT -p tcp --dport 22 -j ACCEPT # # Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT DROP #using DROP for INPUT is not always recommended. Change to ACCEPT if you prefer. iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # Accept packets belonging to established and related connections # iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # #Accept connections on 1194 for vpn access from clients #Take note that the rule says "UDP", and ensure that your OpenVPN server.conf says UDP too # iptables -A INPUT -p udp --dport 1194 -j ACCEPT # #Apply forwarding for OpenVPN Tunneling # iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT #10.8.0.0 ? Check your OpenVPN server.conf to be sure iptables -A FORWARD -j REJECT iptables -t nat -A POSTROUTING -o venet0 -j SNAT --to-source 100.200.255.256 #Use your OpenVPN server's real external IP here # #Enable forwarding # echo 1 > /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p tcp --dport 25 -j ACCEPT iptables -A INPUT -p tcp --dport 26 -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 110 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -L -v But when I connect to my vpn, i can't browsing and also got RTO on pinging yahoo, etc

  Read the article

• What is there in Win 7 Pro (or Ultimate) that is not there in Home Premium? - Especially considering this situation..

  - by Senthil

  I want to know the REAL difference between Windows 7 Home Premium and Professional/Utimate. In India, the cost of different versions: Ultimate - 11,200 INR Professional - 10,700 INR Home Premium - 6,600 INR The absolute cost of the first two is so high to me that the difference (500 INR) doesn't matter. So to me there is really no choice between the first two - If I decide to buy the Professional version, I'd rather go for Ultimate itself. What I want to know is, whether Home Premium is enough for my needs. I tried searching for comparison but many look like just marketing junk from MS. They are short and vague. According to this page, the major differences between Pro and HomePremium are Run many Windows XP productivity programs in Windows XP Mode. Connect to company networks easily and more securely with Domain Join. You can do both in Pro but not in Home Premium. I intend to use my Windows 7 for a small business - just starting up. So I'll be dealing with the following: All kinds of development tools, servers Very important - I will run Virtual Machine Software (MS VPC or VMWare or Sun VirtualBox etc..) My system will be acting as the server for most purposes till I can afford dedicated servers. Connect the system to a variety of network devices (PCs, Printers, etc..) Run productivity, business and financial apps Any other small software startup business requirement that I haven't thought of yet. Professional (and Ultimate) is twice as expensive as Home Premium. So it'd be great if someone can point out the things you cannot do with Home Premium, when you use it like I explained above, so that I can make a decision about which one to buy. I need some real-life experiences so that I can make an informed decision - not a decision based on marketing junk.

  Read the article

• OpenAM throwing 302 0 behind haproxy, nginx

  - by Travis

  I'm having some issues with my deployment and was wondering if you can help. My set up is as follows: 2 OpenAM servers are set up behind a load balancer (HAproxy). The load balancer is set up behind two reverse proxies (nginx). The two reverse proxies are ser up behind another load balancer (haproxy). So a request will go through Haproxy nginx Haproxy openam I can access the OpenAM web console through the reverse proxies without a problem. Everything works fine at this level. However when I access openam through the load balancer in front of the reverse proxies Openam throws a 302 error. The funny thing is however I can access the host/openam/UI/Login and login successfully. I even get the cookie and have access to my apps that are set up. However immediately after the login OpenAM throws a 302 redirect. I'm puzzled and cannot figure out what is going wrong. Does anyone have any idea? My config files are below: nginx config : server { listen 443; server_name oamlb1; location / { proxy_pass http://oamlb1.mydomain.com:8080; proxy_set_header X-Real-IP $remote_addr; } location /openam { proxy_pass http://oamlb1.mydomain.com:8080; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host oamlb1.mydomain.com:8080; } } haproxy config : (This file is for the servers. The file for the reverse proxies is idenical except it points to the reverse proxies) listen http_proxy :8090 mode http balance roundrobin option httpclose option forwardfor server webA oamserver1.mydomain.com:18080 option forwardfor Thanks

  Read the article

• Networking "chokes" on Windows 7 64 bit

  - by Rohit Nair

  I've been having this problem for some months now, and I have been unable to figure out a solution, or even the cause. At random points throughout the day, my internet connectivity "freezes". I don't get disconnected from my local wireless network. My router doesn't get disconnected from the world. However, for some reason, my computer stops receiving packets. If I'm playing an MMO ( World of Warcraft, in this case, but it has happened with Eve Online as well ) all activity just freezes. If I try to browse, Opera, Firefox and IE all stall at "Waiting for google.com..." or whatever the hostname may be. Inspection with a packet sniffer seems to reveal that there are no incoming packets. Here's the interesting part. Disconnecting from my wireless network and reconnecting fixes the issue. Obviously this led me to conclude that it was a problem with my router or wireless card. However, I have tweaked all the settings on my router that I could think of, including things like QoS, AP Isolation, etc. with no change. My wireless card doesn't really have that many options, and I have uninstalled and reinstalled drivers a few times without any change. Windows Firewall on/off doesn't make a difference. Anyone have any suggestions for debugging this? It's becoming an annoyance.

  Read the article

• Ballooning Mac OS X kernel_task and Wired memory usage. How to diagnose / fix?

  - by user28930

  I have a very strange issue, which I'm having a hard time diagnosing as to the root cause. I have a Mac Pro (2008, 8-core 2.8 GHz, 8800GT) with 14 GB of RAM (recently upgraded because of this issue!). When I boot my system and log in, vm_stat / top / Activity Monitor will show that kernel_task has about 150 MB allocated, and the machine has about 800 MB of Wired memory being allocated. Even initially, 800 MB seems an awful lot of wired memory to be allocated with no applications running - but, it gets worse. (NB: Wired is locked, unswappable memory) After a very short time, sometimes triggered by something as simple as launching a terminal, kernel_task will balloon to 8-900 MB of Real Mem (RSIZE), and Wired Memory will accelerate to 1.6 GB (implying that all the extra memory requests are for wired RAM in the kernel). If I quit everything (I.E: no running applications, bar an activity monitor or terminal to view top), there is no appreciable reduction in either kernel_task RSIZE, or Wired Memory usage. Going the opposite way, and loading the system with tasks also shows that wired memory does not get reduced - and that importantly it is not reduced in preference to heavy swapping. If I log out and log back in again, it reduces a bit (450 MB kernel_task, 1.28 GB Wired), but not back to the start. I'm not running any wacky kexts - and futhermore, kextstat shows no huge memory allocations there; the largest being com.apple.nvidia.nv50hal at about 4 MB of Memory. The machine feels overall more sluggish when this has happened - unsurprisingly because such a huge amount of RAM has been marked as non-pageable. So I have a few questions: 1) Is there a good way to diagnose what has allocated all of this wired memory? It's often over 2 times the kernel_task size, running no applications. The real memory total doesn't seem to add up - it seems that there is a bunch of RAM that isn't being accounted for anywhere. 2) What is happening to cause the kernel to suddenly require 6 times as much memory?

  Read the article

• How to use a local Leopard Server Mail server acting "like" an Exchange mail server

  - by Richard Chevre

  We have a local Exchange 2003 server (company .local) who is collecting POP3 mail accounts on a distant (company .com) mailserver. The mails are collected by the Exchange server every 5-10 minutes and stored locally (on company .local), so the users can read them without going on the "real" mail server (company.com) What was explaned to me is that the mail collection is made with POP Now we are migrating on Snow Leopard Server. We have chosen to use a new extension for our local domain: .leo So our mailserver's FQDN is mail.company.leo, and the users have a user [email protected] formated mail address. A) All works fine except that I can't find how to tell the mail.company.leo that he must retreive the mails from the "real" public server (mail.company.com) I'm hoping to use IMAP and not POP. I can send mail using SMTP relay from mail.company.leo but (I know it's trivial) answering is not possible, even if I specify the reply-to as [email protected] (this seems to be related to A) ) I don't know if it's very complicated (I suspect not, but...) to achieve what I want to do, and I'm not a genius. But as I'm a little bit lost, I hopesomebody can or will help me. Solving this will allow us to use iCal invitations too, so a lot of services depends of these mailserver settings Some of you discuss the fact thta we choose to use a "new" tld with the .leo extension. We have no problem for that, we could use .local. no problem ;) We used .leo instead of .local just to differentiate the two systems (Exchange and SnowLeopardServer). The question was not about that, it was just to know if we can set a SnowLeopard mail server to act like an Exchange Server. Again thank you for your advice and help Richard Thanks in advance Richard

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• Dell PE2950 - slow IO rates for writing and reading locally

  - by OrenM

  I'm having a serious issue with dell server PE2950. The server has really slow IO rates, so slow that I'm not able to use it anymore I tried few things to solve this: changing disks to new disks (configured them as raid1) changing perc card + perc cables reinstalling the OS of course, had to cause of changing of disks, centos 5.5 x64bit firmware update to everything virtual disks policy: No Read Ahead,Write Back, disk cache policy disabled. openmanage doesn't alert about anything, also i ran dell's diag tests, everything passed, also dell didn't see anything in deset log. dell offered to reseat everything, including the cpu, we did that as well, still io rates are slow I have several PE2950 servers, and I never had such a thing with any of those. All have similar or exact hardware as this one, all configured the same, with the same os centos 5.5 x64, same disks, same raid, same policy. Just for comparison: the problematic PE2950 server: [root@bad ~]# time sh -c "dd if=/dev/zero of=/tmp/ddfile bs=8k count=200000 && sync" 200000+0 records in 200000+0 records out 1638400000 bytes (1.6 GB) copied, 27.7946 seconds, 58.9 MB/s real 0m33.968s user 0m0.531s sys 0m26.000s good PE2950 server (with the exact same hardware): [root@good ~]# time sh -c "dd if=/dev/zero of=/tmp/ddfile bs=8k count=200000 && sync" 200000+0 records in 200000+0 records out 1638400000 bytes (1.6 GB) copied, 3.19999 seconds, 512 MB/s real 0m7.694s user 0m0.053s sys 0m4.057s Hopefully you will have an idea what can cause the problem.

  Read the article

• Wireless disconnect randomly with wpa_supplicant reason=2

  - by renenglish

  I installed ubuntu-server 12.04 on my PC , and I use an usb wireless card to join the network. It works ok when I boot up my PC , but the wireless disconnects after a while. I pkill wpa_supplicant and reload the driver rtl8192cu , then it works a again. Then it disconnect again after about a random minutes. Here is the syslog: 22384 May 29 21:49:27 homecenter kernel: [ 6450.459313] wlan1: authenticated 22385 May 29 21:49:27 homecenter kernel: [ 6450.459535] wlan1: associate with f4:ec:38:45:62:74 (try 1) 22386 May 29 21:49:27 homecenter kernel: [ 6450.469080] wlan1: RX AssocResp from f4:ec:38:45:62:74 (capab=0 x431 status=0 aid=3) 22387 May 29 21:49:27 homecenter kernel: [ 6450.469085] wlan1: associated 22388 May 29 21:49:27 homecenter wpa_supplicant[2342]: Associated with f4:ec:38:45:62:74 22389 May 29 21:49:27 homecenter kernel: [ 6450.481933] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready 22390 May 29 21:49:27 homecenter wpa_supplicant[2342]: WPA: Key negotiation completed with f4:ec:38:45:62:7 4 [PTK=CCMP GTK=CCMP] 22391 May 29 21:49:27 homecenter wpa_supplicant[2342]: CTRL-EVENT-CONNECTED - Connection to f4:ec:38:45:62: 74 completed (auth) [id=0 id_str=] 22392 May 29 21:49:38 homecenter kernel: [ 6461.472014] wlan1: no IPv6 routers present 22393 May 29 21:49:38 homecenter ntpdate[2263]: step time server 91.189.94.4 offset 0.012758 sec 22394 May 29 21:49:51 homecenter ntpdate[2404]: step time server 91.189.94.4 offset -0.001190 sec 22395 May 29 21:54:38 homecenter kernel: [ 6762.052030] wlan1: deauthenticated from f4:ec:38:45:62:74 (Reas on: 2) 22396 May 29 21:54:38 homecenter wpa_supplicant[2342]: CTRL-EVENT-DISCONNECTED bssid=f4:ec:38:45:62:74 reas on=2 22397 May 29 21:54:38 homecenter kernel: [ 6762.064744] cfg80211: All devices are disconnected, going to re store regulatory settings 22398 May 29 21:54:38 homecenter kernel: [ 6762.064752] cfg80211: Restoring regulatory settings 22399 May 29 21:54:38 homecenter kernel: [ 6762.064757] cfg80211: Calling CRDA to update world regulatory d omain 22400 May 29 21:54:38 homecenter kernel: [ 6762.069938] cfg80211: Ignoring regulatory request Set by core s ince the driver uses its own custom regulatory domain 22401 May 29 21:54:38 homecenter kernel: [ 6762.069943] cfg80211: World regulatory domain updated: 22402 May 29 21:54:38 homecenter kernel: [ 6762.069945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 22403 May 29 21:54:38 homecenter kernel: [ 6762.069949] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22404 May 29 21:54:38 homecenter kernel: [ 6762.069952] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22405 May 29 21:54:38 homecenter kernel: [ 6762.069956] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22406 May 29 21:54:38 homecenter kernel: [ 6762.069959] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22407 May 29 21:54:38 homecenter kernel: [ 6762.069962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KH z), (300 mBi, 2000 mBm)

  Read the article

• Proxy to either Rails app or Node.js app depending on HTTP path w/ Nginx

  - by Cirrostratus

  On Ubuntu 11, I have Nginx correctly serving either CouchDB or Node.js depending on the path, but am unable to get Nginx to access a Rails app via it's port. server { rewrite ^/api(.*)$ $1 last; listen 80; server_name example.com; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_pass http://127.0.0.1:3005/; } location /ruby { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_pass http://127.0.0.1:9051/; } location /_utils { proxy_pass http://127.0.0.1:5984; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_buffering off; # buffering would break CouchDB's _changes feed } gzip on; gzip_comp_level 9; gzip_min_length 1400; gzip_types text/plain text/css image/png image/gif image/jpeg application/x-javascript text/xml application/xml application/x ml+rss text/javascript; gzip_vary on; gzip_http_version 1.1; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; } / and /_utils are working bu /ruby gives me a 403 Forbidden

  Read the article

• Is this SPF record correct for me?

  - by DT

  I'm completely new to Stack Overflow, so Hi! I need to add an SPF record to my site "main.com" (not the real address) to allow an email publishing company "emailpublishers.com" (not the real address) to send emails on my behalf. However, I'm nervous about adding an SPF record because of the havoc it could wreak if done incorrectly. I use Google Apps. I also use "auxiliary.com" to send mail from "main.com." And, of course, I use "main.com" to send mail as well. "auxiliary.com" doesn't have an SPF record. I used Microsofts' and OpenSPF's wizards to generate the following SPF entry. Does it seem to be correct for me? "v=spf1 a mx ip4:55.55.555.55 mx:alt1.aspmx.l.google.com mx:alt2.aspmx.l.google.com mx:aspmx.l.google.com mx:aspmx2.googlemail.com mx:aspmx3.googlemail.com mx:aspmx4.googlemail.com mx:aspmx5.googlemail.com a:auxiliary.com include:_spf.google.com include:auxiliary.com mx:auxiliary.com include:emailpublishers.com mx:emailpublishers.com ~all" However, my host MediaTemple says in a knowledge base article to use: v=spf1 a:main.com/20 ~all So that added to my confusion. Thanks a lot!

  Read the article

• Linux Port 80 to redirect to a Windows box

  - by Richard Staehler

  I have 2 servers here at work. One is a Windows 2008 Server R2 (for safety's sake, lets use 192.168.1.100) and the other is a Fedora 14 (192.168.1.101). Currently when you hit our subdomain, x.test.com, our routers tell it to go to our Fedora box, and since Apache is installed and listening to port 80, it displays the Fedora Apache Test Page. It's obvious that I don't use port 80 for this machine, however I do use NAGIOS on it and its always nice to be able to access that from anywhere in the world. So when I want to access it, I just type x.test.com/nagios. Now here comes the dilemma.... On the Windows R2 box, we recently have installed a program that requires us to setup a web server using IIS7. Because of this application, I'm going to be creating a new subdomain called y.test.com, but since we only have 1 WAN/router, it will still get pointed to our Fedora box. That being said, it wants to use port 80 as well (or whatever port I damn well wish to assign it). So my question is: since our router is pointing to the Fedora 14 box (.101), and I want to make sure I can access NAGIOS from anywhere in the world, how do I tell Apache (httpd) to redirect port 80 to the other server (.100)? If not possible, what are my other options? I have rinetd installed on Fedora and have even tried the option 192.168.1.101 80 192.168.1.100 80 and it didn't seem to work "because port 80 was already bound" Thoughts? and Thanks!

  Read the article

• New monitor connected to HDMI adaptor doesn't show output after booting

  - by Paul

  Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you.

  Read the article

• Mirror a Dropbox repository in Sharepoint and restrict access

  - by Dan Robson

  I'm looking for an elegant way to solve the following problem: My development team uses Dropbox for sharing documents amongst our immediate group. We'd like to put some of those documents into a SharePoint repository for the larger group to be able to access, as granting Dropbox access to the group at large is not ideal. However, we'd like to continue to be able to propagate changes to the SharePoint site simply by updating the files in Dropbox on our local client machines, and also vice versa - users granted access on SharePoint that update files in that workspace should be able to save their files and the changes should appear automatically on our client PC's. I've already done the organization of the folders so that in Dropbox, there exists a SharePoint folder that looks something like this: SharePoint ----Team --------Restricted Access Folders ----Organization --------Open Access Folders The Dropbox master account and the SharePoint master account are both set up on my file server. Unfortunately, Dropbox doesn't seem to allow syncing of folders anywhere above the \Dropbox\ part of the file system's hierarchy - or all I would have to do is find where the Sharepoint repository is maintained locally, and I'd be golden. So it seems I have to do some sort of 2-way synchronization between the Dropbox folder on the file server and the SharePoint folder on the file server. I messed around with Microsoft SyncToy, but it seems to be lacking in the area of real-time updating - and as much as I love rsync, I've had nothing but bad luck with it on Windows, and again, it has to be kicked off manually or through Task Scheduler - and I just have a feeling if I go down that route, it's only a matter of time before I get conflicts all over the place in either Dropbox, SharePoint, or both. I really want something that's going to watch both folders, and when one item changes, the other automatically updates in "real-time". It's quite possible I'm going down the entirely wrong route, which is why I'm asking the question. For simplicity's sake, I'll restate the goal: To be able to update Dropbox and have it viewable on the SharePoint site, or to update the SharePoint site and have it viewable in Dropbox. And since I'm a SharePoint noob, I'll also need help hiding the "Team" subfolder from everyone not in a specific group in AD.

  Read the article

• Windows Server 2008 R2 DNS - One IP, multiple servers

  - by Blu Dragon

  I need opinions and examples on how to best to accomplish the setup I am looking for. I have a public-facing AD domain server with one public IP address. I have setup an external zone for example.com and I successfully have my own name servers pointing to it at ns0.example.com and ns1.example.com. I also have an internal zone for my private network at home.example.com. I am behind a router with the domain server in the DMZ. I want dev.example.com to be accessible from the outside world over https and to point to internal IP address 192.168.1.78. Likewise, I want www.example.com to be accessible from the outside world and point to internal IP address 192.168.1.79. Both dev and www servers are CentOS 5.6 VMs running inside of Hyper-V on the domain server (bad idea I know but I am limited on hardware atm). What is best way to achieve this? From what I have read and researched on Google, I may need to setup a reverse proxy but I am not sure how well that will work with SSL.

  Read the article

• Configure nginx for multiple node.js apps with own domains

  - by udo

  I have a node webapp up and running with my nginx on debian squeeze. Now I want to add another one with an own domain but when I do so, only the first app is served and even if I go to the second domain I simply get redirected to the first webapp. Hope you see what I did wrong here: example1.conf: upstream example1.com { server 127.0.0.1:3000; } server { listen 80; server_name www.example1.com; rewrite ^/(.*) http://example1.com/$1 permanent; } # the nginx server instance server { listen 80; server_name example1.com; access_log /var/log/nginx/example1.com/access.log; # pass the request to the node.js server with the correct headers and much more can be added, see nginx config options location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://example1.com; proxy_redirect off; } } example2.conf: upstream example2.com { server 127.0.0.1:1111; } server { listen 80; server_name www.example2.com; rewrite ^/(.*) http://example2.com/$1 permanent; } # the nginx server instance server { listen 80; server_name example2.com; access_log /var/log/nginx/example2.com/access.log; # pass the request to the node.js server with the correct headers and much more can be added, see nginx config options location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://example2.com; proxy_redirect off; } } curl simply does this: zazzl:Desktop udo$ curl -I http://example2.com/ HTTP/1.1 301 Moved Permanently Server: nginx/1.2.2 Date: Sat, 04 Aug 2012 13:46:30 GMT Content-Type: text/html Content-Length: 184 Connection: keep-alive Location: http://example1.com/ Thanks :)

  Read the article

• Question about domain name registration

  - by Obay

  I received the following email from a certain [email protected] YYY is a company name ZZZ is OUR company name Dear Manager, We are a professional intellectual property rights consultant organization, mainly deal with the global domain name registration and internet intellectual property rights protection. On March. 24th, 2010, we formally received an application from YYY, they applied to register the internet brand “ZZZ” and some relevant domain names with our organization. During our preliminary investigation, we found that these domain names' keyword is fully identical with your trademark. Therefore, we need to confirm with you, whether you consigned YYY to register these domain names with us or not? Or, is YYY your business partner or distributor? If you have no relationship with this company, we assume that they have other purposes to obtain these domain names. Currently, we have already suspended this company's application temporarily due to the seriousness of this isuue. In order to avoid the vicious domain name grabbing, please let the relevant person make a confirmation with me via telephone or email as soon as possible. Thank you for your support to our work! Best Regards XXX Tel: xxxxx-xxxx xxxx Fax: xxxxx-xxxx xxxx Email: [email protected] www.world-wtc.cn This seems legit, or is it? By the way, XXX is just a first name, not a complete name.

  Read the article

• Router failover not detecting outside interface link lost

  - by Matt

  Suppose I have two routers configured in master/slave configuration. They look something like this (addresses are not real ones) 123.123.123.10 <===> [eth0] Router 1 (10.1.1.2) [eth1] ===> +----------+ | 10.1.1.1 | ===> LAN 172.123.123.10 <===> [eth0] Router 2 (10.1.1.3) [eth1] ===> +----------+ The 10.1.1.1 is the default route for the Network (10.1.1.0). What's slightly different in this config to other's I've seen is that I don't have an external virtual IP. Also, the 10.1.1.1 addresses are in real life, public IP's (not private ones shown here). This is more of a router setup than a firewall setup so I'm not using NAT here. Now the issue that I'm having is that I can't see any way to configure UCARP or VRRP to monitor both eth0 & eth1 and fail over to the backup router should either of them go down. What I'm seeing is that if Router1 is the master and I unplug eth0 on router1, it doesn't fail over to router 2. However, it will if instead I unplug eth1 of router 1. In VRRP I see there is a cluster group, but it seems that for this to work you need to have virtual ip's or vrrp instances rather than actual interfaces assigned to it. I hope my explanation is clear. How do I get around this?

  Read the article

• FreeBSD slow transfers - RFC 1323 scaling issue?

  - by Trey

  I think I may be having an issue with window scaling (RFC 1323) and am hoping that someone can enlighten me on what's going on. Server: FreeBSD 9, apache22, serving a static 100MB zip file. 192.168.18.30 Client: Mac OS X 10.6, Firefox 192.168.17.47 Network: Only a switch between them - the subnet is 192.168.16/22 (In this test, I also have dummynet filtering simulating an 80ms ping time on all IP traffic. I've seen nearly identical traces with a "real" setup, with real internet traffic/latency also) Questions: Does this look normal? Is packet #2 specifying a window size of 65535 and a scale of 512? Is packet #5 then shrinking the window size so it can use the 512 scale and still keep the overall calculated window size near 64K? Why is the window scale so high? Here are the first 6 packets from wireshark. For packets 5 and 6 I've included the details showing the window size and scaling factor being used for the data transfer. Code: No. Time Source Destination Protocol Length Info 108 6.699922 192.168.17.47 192.168.18.30 TCP 78 49190 http [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=8 TSval=945617489 TSecr=0 SACK_PERM=1 115 6.781971 192.168.18.30 192.168.17.47 TCP 74 http 49190 [SYN, ACK] Seq=0 Ack=1 Win=65535 Len=0 MSS=1460 WS=512 SACK_PERM=1 TSval=2617517338 TSecr=945617489 116 6.782218 192.168.17.47 192.168.18.30 TCP 66 49190 http [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSval=945617490 TSecr=2617517338 117 6.782220 192.168.17.47 192.168.18.30 HTTP 490 GET /utils/speedtest/large.file.zip HTTP/1.1 118 6.867070 192.168.18.30 192.168.17.47 TCP 375 [TCP segment of a reassembled PDU] Details: Transmission Control Protocol, Src Port: http (80), Dst Port: 49190 (49190), Seq: 1, Ack: 425, Len: 309 Source port: http (80) Destination port: 49190 (49190) [Stream index: 4] Sequence number: 1 (relative sequence number) [Next sequence number: 310 (relative sequence number)] Acknowledgement number: 425 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) Window size value: 130 [Calculated window size: 66560] [Window size scaling factor: 512] Checksum: 0xd182 [validation disabled] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2617517423, TSecr 945617490 [SEQ/ACK analysis] TCP segment data (309 bytes) Note: originally posted http://forums.freebsd.org/showthread.php?t=32552

  Read the article

• uWSGI cannot find "application" using Flask and Virtualenv

  - by skyler

  Using uWSGI to serve a simple wsgi app, (a simple "Hello, World") my configuration works, but when I try to run a Flask app, I get this in uWSGI's error logs: current working directory: /opt/python-env/coefficient/lib/python2.6/site-packages writing pidfile to /var/run/uwsgi.pid detected binary path: /opt/uwsgi/uwsgi setuid() to 497 your memory page size is 4096 bytes detected max file descriptor number: 1024 lock engine: pthread robust mutexes uwsgi socket 0 bound to TCP address 127.0.0.1:3031 fd 3 Python version: 2.6.6 (r266:84292, Jun 18 2012, 14:18:47) [GCC 4.4.6 20110731 (Red Hat 4.4.6-3)] Set PythonHome to /opt/python-env/coefficient/ *** Python threads support is disabled. You can enable it with --enable-threads *** Python main interpreter initialized at 0xbed3b0 your server socket listen backlog is limited to 100 connections *** Operational MODE: single process *** added /opt/python-env/coefficient/lib/python2.6/site-packages/ to pythonpath. unable to find "application" callable in file /var/www/coefficient/flask.py unable to load app 0 (mountpoint='') (callable not found or import error) *** no app loaded. going in full dynamic mode *** *** uWSGI is running in multiple interpreter mode ***` Note in particular this part of the log: unable to find "application" callable in file /var/www/coefficient/flask.py unable to load app 0 (mountpoint='') (callable not found or import error) **no app loaded. going in full dynamic mode** This is my Flask app: from flask import Flask app = Flask(__name__) @app.route("/") def hello(): return "Hello, World, from Flask!" Before I added my Virtualenv's pythonpath to my configuration file, I was getting an ImportError for Flask. I solved this though, I believe (I'm not receiving errors about it anymore) and here is my complete configuration file: uwsgi: #socket: /tmp/uwsgi.sock socket: 127.0.0.1:3031 daemonize: /var/log/uwsgi.log pidfile: /var/run/uwsgi.pid master: true vacuum: true #wsgi-file: /var/www/coefficient/coefficient.py wsgi-file: /var/www/coefficient/flask.py processes: 1 virtualenv: /opt/python-env/coefficient/ pythonpath: /opt/python-env/coefficient/lib/python2.6/site-packages This is how I start uWSGI, from an rc script: /opt/uwsgi/uwsgi --yaml /etc/uwsgi/conf.yaml --uid uwsgi And if I try to view the Flask program in a browser, I get this: **uWSGI Error** Python application not found Any help is appreciated.

  Read the article

• How are spam e-mails filtered ?

  - by kevindqc

  Hello. I'm just wondering how some e-mails get past the spam filter, and some don't? Everyday I get World of Warcraft phishing emails that get past the filter... For example, here's a phishing email (just the header) I got in my inbox, and not in my junk mail: X-Message-Delivery: Vj0xLjE7dXM9MDtsPTA7YT0wO0Q9MjtTQ0w9Ng== X-Message-Status: n:0 X-SID-PRA: [email protected] X-AUTH-Result: NONE X-Message-Info: M98loaK0Lo27IVRxloyPIZmAwUHKn18nx0o/idLdvGYjK48i19NuvFOnRFYGWE+HdIrNJpi1XaYx0gaAV13cgRnkWSzgHKG1 Received: from blizzard.com ([204.45.59.37]) by SNT0-MC3-F21.Snt0.hotmail.com with Microsoft SMTPSVC(6.0.3790.3959); Sat, 10 Apr 2010 06:38:24 -0700 Received: from hxeabjlh ([192.168.1.165]) (envelope-sender <[email protected]>) by 192.168.1.111 with ESMTP for <[email protected]>; Sat, 10 Apr 2010 08:43:24 -0500 Reply-To: <[email protected]> Sender: [email protected] Message-ID: <DE567AFB9E2F3DD985A2D9A8D12D2917@hxeabjlh> From: "[email protected]" <[email protected]> To: <[email protected]> Subject: World of Warcraft Account Password verification Date: Sat, 10 Apr 2010 21:38:10 +0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_04EE_0137659E.1AA23350" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.5512 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5512 Return-Path: [email protected] X-OriginalArrivalTime: 10 Apr 2010 13:38:24.0607 (UTC) FILETIME=[17F3A6F0:01CAD8B3] From what I understand, when you send an email with SMTP, you can specify any hostname in the "HELO" command. Here, the spammer specified "blizzard.com". And he sent his email through Hotmail using Outlook Express. I just don't understand how this gets past the spam filter? There's this SPF thing that seems to exist... but it doesn't seem to be used by blizzard? I'm on Windows, and if I use nslookup to look for the TXT records of blizzard.com and worldofwarcraft.com, I don't see a thing.... so blizzard is not using SPF? Why would that be?

  Read the article

• Proxying from nginx to Jetty

  - by newbie

  I'm proxying request from nginx to Jetty, but I have problem with request that Jetty receives. Jetty requests shows that request IP address is 127.0.0.1. But I want real server IP and my site has multiple domains, so when request is coming from some domain name to my server, it must available in Jetty request too. nginx config: server { listen 80; ## listen for ipv4 listen [::]:80 default ipv6only=on; ## listen for ipv6 server_name localhost; access_log /var/log/nginx/localhost.access.log; location / { proxy_pass http://127.0.0.1:8080; proxy_set_header X-Real-IP $remote_addr; } } Servlet request: Dump Servlet getMethod: GET getContentLength: -1 getContentType: null getRequestURI: /dump/info getRequestURL: http://127.0.0.1:8080/dump/info getContextPath: getServletPath: /dump getPathInfo: /info getPathTranslated: /tmp/jetty-0.0.0.0-8080-test.war-_-any-/webapp/info getQueryString: null getProtocol: HTTP/1.0 getScheme: http getServerName: 127.0.0.1 getServerPort: 8080 getLocalName: 127.0.0.1 getLocalAddr: 127.0.0.1 getLocalPort: 8080 getRemoteUser: null getUserPrincipal: null getRemoteAddr: 127.0.0.1 getRemoteHost: 127.0.0.1 getRemotePort: 50905 getRequestedSessionId: 6ubs42zhm5q61k5hm84ni3ib isSecure(): false isUserInRole(admin): false getLocale: en_US getLocales: en_US getLocales: en

  Read the article

• How do I format a text file for IIS Mailroot Pickup so that it sends an e-mail with attachments?

  - by Ben McCormack

  How do I need to format a text file so that it can be read by an SMTP service to send an e-mail that has an attachment? We have a server where we are using II6 SMTP to send mail from a Pickup folder. The goal is to drop a properly formatted text file into Mailroot\Pickup and then the file will be automatically processed and sent to the correct SMTP recipient. For simple files, this works correctly. Here's an example of a simple file that works (domain names changed): From:[email protected] To:[email protected] Subject:Hello World! Test Body Of The E-mail When I drop a text file containing the above contents into the Mailroot\Pickup folder, it sends correctly. However, I haven't been able to figure out how to get an attachment to work. I found some material that explained how to encode an SMTP attachment and another tool for simple base64 encoding conversion. Using the information on those pages, I came up with the following text: From:[email protected] To:[email protected] Subject:Hello World! MIME-Version: 1.0 Content-Type: text/plain; boundary="Attached" Content-Disposition: inline; --Attached Content-Transfer-Encoding: base64 Content-Type: text/plain; name="attachment.txt" Content-Disposition: attachment; filenamename="attachment.txt" VGhpcyBpcyBhIHRlc3Qgb2Ygc29tZXRoaW5nIHRvIGVuY29kZS4NCk5ldyBsaW5lDQpOZXcgTGlu ZQ0KIkhlbGxvdyIgISEhDQo9PT09ICcgZnNkZnNkZiAxMjM1NDU2MzQzNA== --Attached-- However, when I place the above text in a file and drop it into Mailroot\Pickup, it doesn't send an attachment correctly. Instead, an e-mail shows up with the following in the body of the e-mail: MIME-Version: 1.0 Content-Type: text/plain; boundary="Attached" Content-Disposition: inline; --Attached Content-Transfer-Encoding: base64 Content-Type: text/plain; name="attachment.txt" Content-Disposition: attachment; filenamename="attachment.txt" VGhpcyBpcyBhIHRlc3Qgb2Ygc29tZXRoaW5nIHRvIGVuY29kZS4NCk5ldyBsaW5lDQpOZXcgTGlu ZQ0KIkhlbGxvdyIgISEhDQo9PT09ICcgZnNkZnNkZiAxMjM1NDU2MzQzNA== --Attached-- I can't figure out what I need to do to format the text file so that the SMTP service correctly sends attachments.

  Read the article

< Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >