Search Results

Search found 4679 results on 188 pages for 'oem computers'.

Page 184/188 | < Previous Page | 180 181 182 183 184 185 186 187 188  | Next Page >

• Resolve Wrong IP from Domain Name only on certain networks

  - by Godric Seer

  I host a personal website on an old desktop that is LAMP based. There are several strange things about this problem so I will break it down into steps. Since I have a dynamic IP, I use no-ip to make sure I have a working domain name at all times. I use the automatic update client, but logged in and checked and my no-ip domain has the proper IP tied to it. Here is a link to the homepage through the no-ip domain for reference. Also, I do a ping and a traceroute on the no-ip domain and get: [eckertzs@localhost ~]$ ping -c 1 endradil.noip.me PING endradil.noip.me (65.24.215.99) 56(84) bytes of data. 64 bytes from endradil.noip.me (65.24.215.99): icmp_seq=1 ttl=64 time=2.23 ms --- endradil.noip.me ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 104ms rtt min/avg/max/mdev = 2.233/2.233/2.233/0.000 ms [eckertzs@localhost ~]$ traceroute endradil.noip.me traceroute to endradil.noip.me (65.24.215.99), 30 hops max, 60 byte packets 1 . (192.168.2.1) 1.755 ms 5.409 ms 5.380 ms 2 endradil.noip.me (65.24.215.99) 6.297 ms 9.543 ms 10.324 ms Using this domain, I can connect to my webserver without issue or interruption(the https is required to avoid a redirect serverside, but it works). I also have a domain I have bought on GoDaddy where I have a CNAME record forwarding the www subdomain to my no-ip domain. CNAME Record Host: www Points to: endradil.noip.me TTL: 1 hour For the past several weeks, I never had an issue using the GoDaddy domain to connect (ssh or https). As of the past few days, however, the GoDaddy domain has only worked intermittently, for a few minutes at a time and then will go down for hours at a time. I get server not found errors most of the time. Also, if I happen to be using the GoDaddy domain for an ssh connection, the connection will freeze. I have run online tests of the DNS and have seen that the website is visible by external servers and resolved to the correct IP. I also contacted GoDaddy support but they had no issues connecting to the website, and therefore did not see any issues. My personal computers (Windows desktop, linux laptop, android phone) all fail to connect when on my personal wifi. If I disconnect my phone from the wifi and use my AT&T wireless data, it can connect with both domains without issue. When I attempt to use Google webmaster tools to crawl the site using the GoDaddy domain, Google can not find the site. From my linux laptop, I have found some interesting results when I ping or traceroute the domain. The results from these: [eckertzs@localhost ~]$ ping -c 1 www.endradil.com PING www.endradil.com.Belkin (198.105.244.228) 56(84) bytes of data. --- www.endradil.com.Belkin ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 10000ms [eckertzs@localhost ~]$ traceroute www.endradil.com traceroute to www.endradil.com (198.105.244.228), 30 hops max, 60 byte packets 1 . (192.168.2.1) 1.918 ms 2.806 ms 2.772 ms 2 cpe-65-24-208-1.insight.res.rr.com (65.24.208.1) 29.247 ms 29.654 ms 30.094 ms 3 cpe-69-23-24-117.new.res.rr.com (69.23.24.117) 15.597 ms 23.218 ms 23.581 ms 4 agg24.clmcohib01r.midwest.rr.com (65.29.1.52) 30.581 ms 30.556 ms 31.192 ms 5 be27.clevohek01r.midwest.rr.com (65.29.1.38) 30.580 ms 31.062 ms 31.038 ms 6 bu-ether25.atlngamq47w-bcr01.tbone.rr.com (107.14.19.38) 37.863 ms 68.844 ms 43.773 ms 7 107.14.17.178 (107.14.17.178) 51.866 ms 51.019 ms 50.989 ms 8 ae0.pr1.dca10.tbone.rr.com (107.14.17.200) 48.467 ms ae-4-0.a0.lax91.tbone.rr.com (66.109.1.113) 49.912 ms * 9 v413.core1.ash1.he.net (209.51.175.33) 60.270 ms 50.842 ms 50.819 ms 10 100ge5-1.core1.nyc4.he.net (184.105.223.166) 55.597 ms 56.045 ms 56.020 ms 11 xerocole-inc.10gigabitethernet12-4.core1.nyc4.he.net (216.66.41.242) 56.001 ms 55.969 ms 55.992 ms 12 * * * both show the incorrect IP. Also, the traceroute timesout on hops 12 through 255 (output truncated above). The traceroute using site24x7 works and shows reasonable results when run from their california server. From another linux box on a different network but in the same city as me (10 miles away), I still get timeout for traceroute, however the IP resolves correctly for the domain. From this I believe that the DNS result is incorrectly cached in either my router/modem or perhaps even at my ISP level. My question is, first, how do I find out exactly what is wrong, and second, how do I resolve it.

  Read the article

• Remote Desktop Services Gateway Issue

  - by AVandelay05

  Alright fellow techies here's the rundown. I have installed Server 2008 r2 Remote Dekstop Services on a VM in my network. I installed the following RD role services: RD Session Host, Licensing, Connection Broker, Gateway, Web Access. When I set things up originally, the gateway server and RDWeb worked as it should locally. After getting things running locally (remoteserver.domainname.local) I wanted to test things externally. From the outside, I couldn't get things running (meaning I could connect to rdweb access externally, but when I tried to run an app I would get the message "can't connect/find computer"). Here's my setup for external access The VM has every RD Services role services installed on it, meaning it acts as gateway, rd web access, session host, licensing, the whole bit. I made a self-signed certificate on the gateway server (gateway.domainname.net is the cert name). Internally, I have a secondary forward-lookup zone called domainname.net with an A record gateway pointing to the local IP of the gateway server. On our public DNS (domainname.net) I have an A record gateway. This is to access the RDWeb externally. In IIS I have the following authentication settings RDWeb: All disabled except for anonymous authentication Rpc: All disabled except for basic and windows RpcWithCert: All disbled except for windows authentication I have the necessary web access config in our sonicwall tz210 (https and rdp, external ip pointing to local ip of rds server) RAP and CAP have the correct user and computer groups, authentication, and allowed devices After all of this, here's what happens accessing externally. I can login correctly to RDWeb Access (I've tried a bogus login, I can't login to it so that's working properly). I see the Apps for use. I click on an app, click connect, the credential window opens, I put in the correct user creds, it tries to connect to the gateway server, but then the cred window comes back in view. I tried to reach a limit of failed logins, but never reached one, haha. So from the same external client machine I try to connect to the gateway through a Remote Desktop connection. I put in the correct gateway settings in the RD window, try to connect and get the same results as I did in RDWeb access. I checked the event logs on the RD Services machine and saw the following event IDs around the time I tried to login externally: ID 6037 with the message "The program svchost.exe, with the assigned process ID 2168, could not authenticate locally by using the target name host/gateway.domainname.net. The target name used is not valid. A target name should refer to one of the local computer names, for example, the DNS host name. Try a different target name." ID 10 RADWebAccess "RD Web Access was unable to access gateway.domainname.net, which is the server that is specified as running the RemoteApp and Desktop Connection Management service. Ensure that the computer account of the RD Web Access server is a member of the TS Web Access Computers security group on gateway.domainname.net" ID 4625 "An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: Administrator Account Domain: gateway.domainname.net Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc000006a Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: USER-LAPTOP Source Network Address: External IP Source Port: 63125 Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols." I don't think the VM has a null SID. The SID of the VM and it's physical host have different SIDS. I can access the blank page for rpc externally using the external gateway name. It seems like authentication is a problem. Also, is it a problem that the external name of the gateway server doesn't match the local name? The external name (which the cert is based on) is gateway.domainname.net and the internal name is remoteserver.domainname.local. That's the only thing I can think of that would be the problem, but the external name has to be different from the local right? Internally, I ping gateway.domainname.net and it gives me the correct local IP of the server. Now, there isn't an actual computer name in AD, but I don't know how I would achieve that? I hope I've been clear....any help would be appreciated. I think I'm close to achieving this. :)

  Read the article

• Why are there so many man-made edge cases in IT, and is there any hope for simplification / unificat

  - by Hamish Grubijan

  This question is meant to generate discussion and so it is marked as community wiki. My observation is that the field of information technology grows so rapidly and randomly, that for many it takes a lot of time to learn many intricacies of some tools that will be obsolete in just short 3 years. If you look at the questions asked on StackOverflow ... at least half of them stem from the fact that some language / tool / API / protocol was poorly designed, is backwards and has gotchas. There are so many things which distract developers from converting English into machine code; instead they spend their time configuring stuff and gluing together things that do not really fit. How many times do you pick up somebody else's project (or someone picks up yours :) ) and realize that this program does not need half of the dialogs that it has, and that the logic can be simplified a great deal? But, it had to be made and sold here before a better thing is made and sold elsewhere, and hence all this rush. I often wish that things would just slow down. I do not want Microsoft Windows to run on my car's computer, my watch, my table, my toaster oven, and my toilet seat. I'd rather have Windows that DOES NOT HAVE WINDOWS REGISTRY, I'd rather have Windows that allows two different programs to work on the same file at the same time, the way it works on Unix systems. Microsoft is just an example. I am looking forward to the day when I do not have to worry about Windows vs Unix new line break, when System32 actually means that this directory contains 32-bit binaries, and not 64-bit ones, the day when dll hell and manifest hell are no longer an issue, the day when it takes me a lot less than 3 months on a new job to learn the system. I do not mean learning the entire code base of a product (depending on the size of it, it can take a long time). I mean - remembering which build-assisting scripts are written in Perl and which version of it, and which ones are done through .bat files, when do I need to manually make every file in some directory writable before running a script, or else a critical step of a database maintenance home-grown tool will bomb, and it will take 2 days to clean that up. Makes me wonder if humans enslaved computers, or if it is the other way around. The key is that improving those things will not bring extra revenue, and hence those taking the time to fix crap like that are not "business focused". However, these imperfections irritate me immensely, particularly because my memory is limited - I can hold only a small portion of that useless knowledge of a system in my head at any given point in time. I must not be alone. Did you also happen to notice that a programmer can waste a lot of time on things that should have been a lot more straight-forward? Is there hope? Will things get better/simpler in the future, or will there be a lot more IT crap floating around? I suppose I see diversity of tools, protocols, etc. as a bad thing. Thank you for participation.

  Read the article

• OpenVPN Server Ethernet Bridging Question

  - by Hooplad

  Hello All, I am having a difficult time properly configuring an ethernet bridge using OpenVPN 2.0.9 install on CentOS 5 ( VPN server ). The goal that I am trying to complete is to connect a VM ( instance running on the same CentOS machine ) acting as a Microsoft Business Contact Manager server. I would then like this "BCM server" to serve Windows XP clients on 192.168.1.0/24 network as well as clients connecting from VPN ( 10.8.0.0/24 ). The setup as it is now was based off a known working configuration. The problem with the working configuration was that it would allow to the client to connect and access everything running on the VPN server ( SVN, Samba, VM Server ) but not any computers on the 192.168.1.0/24 network. I must disclose that the VPN server is behind a router/firewall. Ports are being forwarded correctly ( again, clients were able to connect to the VPN server with no problem. netcat confirms the udp port is open as well ). current ifconfig output br0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 inet addr:192.168.1.169 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::221:5eff:fe4d:3ac2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:846890 errors:0 dropped:0 overruns:0 frame:0 TX packets:3072351 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42686842 (40.7 MiB) TX bytes:4540654180 (4.2 GiB) eth0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:882641 errors:0 dropped:0 overruns:0 frame:0 TX packets:1781383 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:82342803 (78.5 MiB) TX bytes:2614727660 (2.4 GiB) Interrupt:169 eth1 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C3 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:650 errors:0 dropped:0 overruns:0 frame:0 TX packets:1347223 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:67403 (65.8 KiB) TX bytes:1959529142 (1.8 GiB) Interrupt:233 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:17452058 errors:0 dropped:0 overruns:0 frame:0 TX packets:17452058 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94020256229 (87.5 GiB) TX bytes:94020256229 (87.5 GiB) tap0 Link encap:Ethernet HWaddr DE:18:C6:D7:01:63 inet6 addr: fe80::dc18:c6ff:fed7:163/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3086 errors:0 dropped:166 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:315099 (307.7 KiB) vmnet1 Link encap:Ethernet HWaddr 00:50:56:C0:00:01 inet addr:192.168.177.1 Bcast:192.168.177.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4224 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) vmnet8 Link encap:Ethernet HWaddr 00:50:56:C0:00:08 inet addr:192.168.55.1 Bcast:192.168.55.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4226 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) current route table Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.55.0 * 255.255.255.0 U 0 0 0 vmnet8 192.168.177.0 * 255.255.255.0 U 0 0 0 vmnet1 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 current iptables output Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination server_known_working.conf local banshee port 1194 proto udp dev tap0 ca ca.crt cert banshee_server.crt key banshee_server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 192.168.1.0 255.255.255.0" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 4 The following is the current CentOS server config file. server_ethernet_bridged.conf ( current ) local 192.168.1.169 port 1194 proto udp dev tap0 ca ca.crt cert server.crt key server.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.1.169 255.255.255.0 192.168.1.200 192.168.1.210 push "route 192.168.1.0 255.255.255.0 192.168.1.1" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 6 The following is one of the client's config file that was used with the known working configuration. client.opvn client dev tap proto udp remote XXX.XXX.XXX 1194 resolv-retry infinite nobind persist-key persist-tun ca client.crt cert client.crt key client.key tls-auth client.key 1 verb 3 I have tried the HOWTO provided by OpenVPN as well as others http://www.thebakershome.net/openvpn%5Ftutorial?page=1 with no success. Any help or suggestions would be appreciated.

  Read the article

• Appropriate programming design questions.

  - by Edward

  I have a few questions on good programming design. I'm going to first describe the project I'm building so you are better equipped to help me out. I am coding a Remote Assistance Tool similar to TeamViewer, Microsoft Remote Desktop, CrossLoop. It will incorporate concepts like UDP networking (using Lidgren networking library), NAT traversal (since many computers are invisible behind routers nowadays), Mirror Drivers (using DFMirage's Mirror Driver (http://www.demoforge.com/dfmirage.htm) for realtime screen grabbing on the remote computer). That being said, this program has a concept of being a client-server architecture, but I made only one program with both the functionality of client and server. That way, when the user runs my program, they can switch between giving assistance and receiving assistance without having to download a separate client or server module. I have a Windows Form that allows the user to choose between giving assistance and receiving assistance. I have another Windows Form for a file explorer module. I have another Windows Form for a chat module. I have another Windows Form form for a registry editor module. I have another Windows Form for the live control module. So I've got a Form for each module, which raises the first question: 1. Should I process module-specific commands inside the code of the respective Windows Form? Meaning, let's say I get a command with some data that enumerates the remote user's files for a specific directory. Obviously, I would have to update this on the File Explorer Windows Form and add the entries to the ListView. Should I be processing this code inside the Windows Form though? Or should I be handling this in another class (although I have to eventually pass the data to the Form to draw, of course). Or is it like a hybrid in which I process most of the data in another class and pass the final result to the Form to draw? So I've got like 5-6 forms, one for each module. The user starts up my program, enters the remote machine's ID (not IP, ID, because we are registering with an intermediary server to enable NAT traversal), their password, and connects. Now let's suppose the connection is successful. Then the user is presented with a form with all the different modules. So he can open up a File Explorer, or he can mess with the Registry Editor, or he can choose to Chat with his buddy. So now the program is sort of idle, just waiting for the user to do something. If the user opens up Live Control, then the program will be spending most of it's time receiving packets from the remote machine and drawing them to the form to provide a 'live' view. 2. Second design question. A spin off question #1. How would I pass module-specific commands to their respective Windows Forms? What I mean is, I have a class like "NetworkHandler.cs" that checks for messages from the remote machine. NetworkHandler.cs is a static class globally accessible. So let's say I get a command that enumerates the remote user's files for a specific directory. How would I "give" that command to the File Explorer Form. I was thinking of making an OnCommandReceivedEvent inside NetworkHandler, and having each form register to that event. When the NetworkHandler received a command, it would raise the event, all forms would check it to see if it was relevant, and the appropriate form would take action. Is this an appropriate/the best solution available? 3. The networking library I'm using, Lidgren, provides two options for checking networking messages. One can either poll ReadMessage() to return null or a message, or one can use an AutoResetEvent OnMessageReceived (I'm guessing this is like an event). Which one is more appropriate?

  Read the article

• [C#][Design] Appropriate programming design questions.

  - by Edward

  I have a few questions on good programming design. I'm going to first describe the project I'm building so you are better equipped to help me out. I am coding a Remote Assistance Tool similar to TeamViewer, Microsoft Remote Desktop, CrossLoop. It will incorporate concepts like UDP networking (using Lidgren networking library), NAT traversal (since many computers are invisible behind routers nowadays), Mirror Drivers (using DFMirage's Mirror Driver (http://www.demoforge.com/dfmirage.htm) for realtime screen grabbing on the remote computer). That being said, this program has a concept of being a client-server architecture, but I made only one program with both the functionality of client and server. That way, when the user runs my program, they can switch between giving assistance and receiving assistance without having to download a separate client or server module. I have a Windows Form that allows the user to choose between giving assistance and receiving assistance. I have another Windows Form for a file explorer module. I have another Windows Form for a chat module. I have another Windows Form form for a registry editor module. I have another Windows Form for the live control module. So I've got a Form for each module, which raises the first question: 1. Should I process module-specific commands inside the code of the respective Windows Form? Meaning, let's say I get a command with some data that enumerates the remote user's files for a specific directory. Obviously, I would have to update this on the File Explorer Windows Form and add the entries to the ListView. Should I be processing this code inside the Windows Form though? Or should I be handling this in another class (although I have to eventually pass the data to the Form to draw, of course). Or is it like a hybrid in which I process most of the data in another class and pass the final result to the Form to draw? So I've got like 5-6 forms, one for each module. The user starts up my program, enters the remote machine's ID (not IP, ID, because we are registering with an intermediary server to enable NAT traversal), their password, and connects. Now let's suppose the connection is successful. Then the user is presented with a form with all the different modules. So he can open up a File Explorer, or he can mess with the Registry Editor, or he can choose to Chat with his buddy. So now the program is sort of idle, just waiting for the user to do something. If the user opens up Live Control, then the program will be spending most of it's time receiving packets from the remote machine and drawing them to the form to provide a 'live' view. 2. Second design question. A spin off question #1. How would I pass module-specific commands to their respective Windows Forms? What I mean is, I have a class like "NetworkHandler.cs" that checks for messages from the remote machine. NetworkHandler.cs is a static class globally accessible. So let's say I get a command that enumerates the remote user's files for a specific directory. How would I "give" that command to the File Explorer Form. I was thinking of making an OnCommandReceivedEvent inside NetworkHandler, and having each form register to that event. When the NetworkHandler received a command, it would raise the event, all forms would check it to see if it was relevant, and the appropriate form would take action. Is this an appropriate/the best solution available? 3. The networking library I'm using, Lidgren, provides two options for checking networking messages. One can either poll ReadMessage() to return null or a message, or one can use an AutoResetEvent OnMessageReceived (I'm guessing this is like an event). Which one is more appropriate?

  Read the article

• Lock free multiple readers single writer

  - by dummzeuch

  I have got an in memory data structure that is read by multiple threads and written by only one thread. Currently I am using a critical section to make this access threadsafe. Unfortunately this has the effect of blocking readers even though only another reader is accessing it. There are two options to remedy this: use TMultiReadExclusiveWriteSynchronizer do away with any blocking by using a lock free approach For 2. I have got the following so far (any code that doesn't matter has been left out): type TDataManager = class private FAccessCount: integer; FData: TDataClass; public procedure Read(out _Some: integer; out _Data: double); procedure Write(_Some: integer; _Data: double); end; procedure TDataManager.Read(out _Some: integer; out _Data: double); var Data: TDAtaClass; begin InterlockedIncrement(FAccessCount); try // make sure we get both values from the same TDataClass instance Data := FData; // read the actual data _Some := Data.Some; _Data := Data.Data; finally InterlockedDecrement(FAccessCount); end; end; procedure TDataManager.Write(_Some: integer; _Data: double); var NewData: TDataClass; OldData: TDataClass; ReaderCount: integer; begin NewData := TDataClass.Create(_Some, _Data); InterlockedIncrement(FAccessCount); OldData := TDataClass(InterlockedExchange(integer(FData), integer(NewData)); // now FData points to the new instance but there might still be // readers that got the old one before we exchanged it. ReaderCount := InterlockedDecrement(FAccessCount); if ReaderCount = 0 then // no active readers, so we can safely free the old instance FreeAndNil(OldData) else begin /// here is the problem end; end; Unfortunately there is the small problem of getting rid of the OldData instance after it has been replaced. If no other thread is currently within the Read method (ReaderCount=0), it can safely be disposed and that's it. But what can I do if that's not the case? I could just store it until the next call and dispose it there, but Windows scheduling could in theory let a reader thread sleep while it is within the Read method and still has got a reference to OldData. If you see any other problem with the above code, please tell me about it. This is to be run on computers with multiple cores and the above methods are to be called very frequently. In case this matters: I am using Delphi 2007 with the builtin memory manager. I am aware that the memory manager probably enforces some lock anyway when creating a new class but I want to ignore that for the moment. Edit: It may not have been clear from the above: For the full lifetime of the TDataManager object there is only one thread that writes to the data, not several that might compete for write access. So this is a special case of MREW.

  Read the article

• how can udp data can passed through RS232 in ansi c?

  - by moon

  i want to transmit and receive data on RS232 using udp and i want to know about techniques which allow me to transmit and receive data on a faster rate and also no lose of data is there? thanx in advance. i have tried but need improvements if possible #include <stdio.h> #include <dos.h> #include<string.h> #include<conio.h> #include<iostream.h> #include<stdlib.h> #define PORT1 0x3f8 void main() { int c,ch,choice,i,a=0; char filename[30],filename2[30],buf; FILE *in,*out; clrscr(); while(1){ outportb(PORT1+0,0x03); outportb(PORT1+1,0); outportb(PORT1+3,0x03); outportb(PORT1+2,0xc7); outportb(PORT1+4,0x0b); cout<<"\n==============================================================="; cout<<"\n\t*****Serial Communication By BADR-U-ZAMAN******\nCommunication between two computers By serial port"; cout<<"\nPlease select\n[1]\tFor sending file \n[2]\tFor receiving file \n[3]\tTo exit\n"; cout<<"=================================================================\n"; cin>>choice; if(choice==1) { strcpy(filename,"C:\\TC\\BIN\\badr.cpp"); cout<<filename; for(i=0;i<=strlen(filename);i++) outportb(PORT1,filename[i]); in=fopen(filename,"r"); if (in==NULL) { cout<<"cannot open a file"; a=1; } if(a!=1) cout<<"\n\nFile sending.....\n\n"; while(!feof(in)) { buf=fgetc(in); cout<<buf; outportb(PORT1,buf); delay(5); } } else { if(choice==3) exit(0); i=0; buf='a'; while(buf!=NULL) { c=inportb(PORT1+5); if(c&1) { buf=inportb(PORT1); filename2[i]=buf; i++; } } out=fopen(filename2,"t"); cout<<"\n Filename received:"<<filename[2]; cout<<"\nReading from the port..."; cout<<"writing to file"<<filename2; do { c=inportb(PORT1+5); if(c&1) { buf=inportb(PORT1); cout<<buf; fputc(buf,out); delay(5); } if(kbhit()) { ch=getch(); } }while(ch!=27); } getch(); } }

  Read the article

• Active Directory: trouble adding new DC

  - by ethrbunny

  I have a domain with 3 DCs. One is starting to fail so I brought up a new one. All are running Win 2003. Problem: there appear to be replication issues between the 4 machines but I can't figure out what's causing this. All are registered with the DNS as identically as I can make them. How do I know there is a problem? Nagios is telling me that the other 3 DCs are having KCCEvent errors and the new machine is reporting "failed connectivity" errors. Doing dcdiag on the new machine reports: the host could not be resolved to an IP address. This seems crazy as I log into it using the DNS name. I can ping it from the other three machines using this DNS name as well. repadmin /showreps from the new machine says its seeing the other 3 machines. Doing the same from one of the older machines doesn't show the new machine. I've tried netdiag /repair numerous times. No luck. There are no firewalls running on any of the machines. If I look at Domain info via MMC (on the new machine) it appears that all the information is current. Users, computers, DCs.. its all there. Im puzzled as to what step(s) I've missed in adding this new machine. Suggestions? EDIT: dcdiag from non-working: C:\Documents and Settings\Administrator.BME>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\YELLOW Starting test: Connectivity The host 312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu) couldn't be resolved, the server name (yellow.server.edu) resolved to the IP address (10.127.24.79) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... YELLOW failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\YELLOW Skipping all tests, because server YELLOW is not responding to directory service requests Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck dcdiag from working: P:\>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\AD1 Starting test: Connectivity ......................... AD1 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\AD1 Starting test: Replications ......................... AD1 passed test Replications Starting test: NCSecDesc ......................... AD1 passed test NCSecDesc Starting test: NetLogons ......................... AD1 passed test NetLogons Starting test: Advertising ......................... AD1 passed test Advertising Starting test: KnowsOfRoleHolders ......................... AD1 passed test KnowsOfRoleHolders Starting test: RidManager ......................... AD1 passed test RidManager Starting test: MachineAccount ......................... AD1 passed test MachineAccount Starting test: Services ......................... AD1 passed test Services Starting test: ObjectsReplicated ......................... AD1 passed test ObjectsReplicated Starting test: frssysvol ......................... AD1 passed test frssysvol Starting test: frsevent ......................... AD1 passed test frsevent Starting test: kccevent ......................... AD1 passed test kccevent Starting test: systemlog ......................... AD1 passed test systemlog Starting test: VerifyReferences ......................... AD1 passed test VerifyReferences Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck P:\>

  Read the article

• CSC folder data access AND roaming profiles issues (Vista with Server 2003, then 2008)

  - by Alex Jones

  I'm a junior sysadmin for an IT contractor that helps small, local government agencies, like little towns and the like. One of our clients, a public library with ~ 50 staff users, was recently migrated from Server 2003 Standard to Server 2008 R2 Standard in a very short timeframe; our senior employee, the only network engineer, had suddenly put in his two weeks notice, so management pushed him to do this project before quitting. A bit hasty on management's part? Perhaps. Could we do anything about that? Nope. Do I have to fix this all by myself? Pretty much. The network is set up like this: a) 50ish staff workstations, all running Vista Business SP2. All staff use MS Outlook, which uses RPC-over-HTTPS ("Outlook Anywhere") for cached Exchange access to an offsite location. b) One new (virtualized) Server 2008 R2 Standard instance, running atop a Server 2008 R2 host via Hyper-V. The VM is the domain's DC, and also the site's one and only file server. Let's call that VM "NEWBOX". c) One old physical Server 2003 Standard server, running the same roles. Let's call it "OLDBOX". It's still on the network and accessible, but it's been demoted, and its shares have been disabled. No data has been deleted. c) Gigabit Ethernet everywhere. The organization's only has one domain, and it did not change during the migration. d) Most users were set up for a combo of redirected folders + offline files, but some older employees who had been with the organization a long time are still on roaming profiles. To sum up: the servers in question handle user accounts and files, nothing else (eg, no TS, no mail, no IIS, etc.) I have two major problems I'm hoping you can help me with: 1) Even though all domain users have had their redirected folders moved to the new server, and loggin in to their workstations and testing confirms that the Documents/Music/Whatever folders point to the new paths, it appears some users (not laptops or anything either!) had been working offline from OLDBOX for a long time, and nobody realized it. Here's the ugly implication: a bunch of their data now lives only in their CSC folders, because they can't access the share on OLDBOX and sync with it finally. How do I get this data out of those CSC folders, and onto NEWBOX? 2) What's the best way to migrate roaming profile users to non-roaming ones, without losing vital data like documents, any lingering PSTs, etc? Things I've thought about trying: For problem 1: a) Reenable the documents share on OLDBOX, force an Offline Files sync for ALL domain users, then copy OLDBOX's share's data to the equivalent share on NEWBOX. Reinitialize the Offline Files cache for every user. With this: How do I safely force a domain-wide Offline Files sync? Could I lose data by reenabling the share on OLDBOX and forcing the sync? Afterwards, how can I reinitialize the Offline Files cache for every user, without doing it manually, workstation by workstation? b) Determine which users have unsynced changes to OLDBOX (again, how?), search each user's CSC folder domain-wide via workstation admin shares, and grab the unsynched data. Reinitialize the Offline Files cache for every user. With this: How can I detect which users have unsynched changes with a script? How can I search each user's CSC folder, when the ownership and permissions set for CSC folders are so restrictive? Again, afterwards, how can I reinitialize the Offline Files cache for every user, without doing it manually, workstation by workstation? c) Manually visit each workstation, copy the contents of the CSC folder, and manually copy that data onto NEWBOX. Reinitialize the Offline Files cache for every user. With this: Again, how do I 'break into' the CSC folder and get to its data? As an experiment, I took one workstation's HD offsite, imaged it for safety, and then tried the following with one of our shop PCs, after attaching the drive: grant myself full control of the folder (failed), grant myself ownership of the folder (failed), run chkdsk on the whole drive to make sure nothing's messed up (all OK), try to take full control of the entire drive (failed), try to take ownership of the entire drive (failed) MS KB articles and Googling around suggests there's a utility called CSCCMD that's meant for this exact scenario...but it looks like it's available for XP, not Vista, no? Again, afterwards, how can I reinitialize the Offline Files cache for every user, without doing it manually, workstation by workstation? For problem 2: a) Figure out which users are on roaming profiles, and where their profiles 'live' on the server. Create new folders for them in the redirected folders repository, migrate existing data, and disable the roaming. With this: Finding out who's roaming isn't hard. But what's the best way to disable the roaming itself? In AD Users and Computers, or on each user's workstation? Doing it centrally on the server seems more efficient; that said, all of the KB research I've done turns up articles on how to go from local to roaming, not the other way around, so I don't have good documentation on this. In closing: we have good backups of NEWBOX and OLDBOX, but not of the workstations themselves, so anything drastic on the client side would need imaging and testing for safety. Thanks for reading along this far! Hopefully you can help me dig us out of this mess.

  Read the article

• Whatever hover not working IE6 and IE7

  - by jovialwhispers

  Below is the css for my menu #menu { position: absolute; left: 170px; top: 92px; background: #336699; float: left; z-index:50; } menu ul { list-style: none; margin: 0; padding: 0; width: 9em; float: left; } menu a, #menu h2 { font: bold 11px/20px arial, helvetica, sans-serif; display: block; border-top-width: 1px; border-bottom-width: 1px; border-left-width: 1px; border-right-width: 1px; border-style: solid; border-color: #ccc #888 #555 #bbb; margin: 0; padding: 4px 3px; } menu h2 { color: #fff; background: #336699; text-transform: uppercase; border-top-width: 0px; border-bottom-width: 0px; border-left-width: 1px; border-right-width: 1px; } menu a { color: #fff; background: #79A3CF; text-decoration: none; } menu a:hover { color: #a00; background: #fff; } menu li { position: relative; } menu li ul li { position: relative; width: 12em; } menu ul ul { position: absolute; z-index: 500; } menu ul ul ul { position: absolute; top: 0; left: 100%; } div#menu ul ul, div#menu ul li:hover ul ul, div#menu ul ul li:hover ul ul { display: none; } div#menu ul li:hover ul, div#menu ul ul li:hover ul, div#menu ul ul ul li:hover ul { display: block; } Here is my html design for the menu. It is a horizontal menu with dropdown submenus <div id="menu"> <ul> <li><h2>Computers</h2> <ul> <li>subitem <ul><li>subitems</li> </li> <li>submitem</li> <li>submitem</li> </li> <li><h2>Network</h2> <ul><li>subitems</li> </li> </ul> </div> I am using the minified version of the whatever hover script. Checked few posts here on this issue but couldn't solve the problem. The submenus are not appearing on IE6 and IE7. I trid adding <!--[if lt IE 8]> but no results...

  Read the article

• Difficulty analyzing text from a file

  - by Nikko

  I'm running into a rather amusing error with my output on this lab and I was wondering if any of you might be able to hint at where my problem lies. The goal is find the high, low, average, sum of the record, and output original record. I started with a rather basic program to solve for one record and when I achieved this I expanded the program to work with the entire text file. Initially the program would correctly output: 346 130 982 90 656 117 595 High# Low# Sum# Average# When I expanded it to work for the entire record my output stopped working how I had wanted it to. 0 0 0 0 0 0 0 High: 0 Low: 0 Sum: 0 Average: 0 0 0 0 0 0 0 0 High: 0 Low: 0 Sum: 0 Average: 0 etc... I cant quite figure out why my ifstream just completely stopped bothering to input the values from file. I'll go take a walk and take another crack at it. If that doesn't work I'll be back here to check for any responses =) Thank you! #include <iostream> #include <fstream> #include <iomanip> #include <string> using namespace std; int main() { int num; int high = 0; int low = 1000; double average = 0; double sum = 0; int numcount = 0; int lines = 1; char endoline; ifstream inData; ofstream outData; inData.open("c:\\Users\\Nikko\\Desktop\\record5ain.txt"); outData.open("c:\\Users\\Nikko\\Desktop\\record5aout.txt"); if(!inData) //Reminds me to change path names when working on different computers. { cout << "Could not open file, program will exit" << endl; exit(1); } while(inData.get(endoline)) { if(endoline == '\n') lines++; } for(int A = 0; A < lines; A++) { for(int B = 0; B < 7; B++) { while(inData >> num) inData >> num; numcount++; sum += num; if(num < low) low = num; if(num > high) high = num; average = sum / numcount; outData << num << '\t'; } outData << "High: " << high << " " << "Low: " << low << " " << "Sum: " << sum << " " << "Average: " << average << endl; } inData.close(); outData.close(); return(0); }

  Read the article

• Opinions on Copy Protection / Software Licensing via phoning home?

  - by Jakobud

  I'm developing some software that I'm going to eventually sell. I've been thinking about different copy protection mechanisms, both custom and 3rd party. I know that no copy protection is 100% full-proof, but I need to at least try. So I'm looking for some opinions to my approach I'm thinking about: One method I'm thinking about is just having my software connect to a remote server when it starts up, in order to verify the license based off the MAC address of the ethernet port. I'm not sure if the server would be running a MySQL database that retrieves the license information, or what... Is there a more simple way? Maybe some type of encrypted file that is read? I would make the software still work if it can't connect to the server. I don't want to lock someone out just because they don't have internet access at that moment in time. In case you are wondering, the software I'm developing is extremely internet/network dependant. So its actually quite unlikely that the user wouldn't have internet access when using it. Actually, its pretty useless without internet/network access. Anyone know what I would do about computers that have multiple MAC addresses? A lot of motherboards these days have 2 ethernet ports. And most laptops have 1 ethernet, 1 wifi and Bluetooth MAC addresses. I suppose I could just pick a MAC port and run with it. Not sure if it really matters A smarty and tricky user could determine the server that the software is connecting to and perhaps add it to their host file so that it always trys to connect to localhost. How likely do you think this is? And do you think its possible for the software to check if this is being done? I guess parsing of the host file could always work. Look for your server address in there and see if its connecting to localhost or something. I've considered dongles, but I'm trying to avoid them just because I know they are a pain to work with. Keeping them updated and possibly requiring the customer to run their own license server is a bit too much for me. I've experienced that and it's a bit of a pain that I wouldn't want to put my customers through. Also I'm trying to avoid that extra overhead cost of using 3rd party dongles. Also, I'm leaning toward connecting to a remote server to verify authentication as opposed to just sending the user some sort of license file because what happens when the user buys a new computer? I have to send them a replacement license file that will work with their new computer, but they will still be able to use it on their old computer as well. There is no way for me to 'de-authorize' their old computer without asking them to run some program on it or something. Also, one important note, with the software I would make it very clear to the user in the EULA that the software connects to a remote server to verify licensing and that no personal information is sent. I know I don't care much for software that does that kinda stuff without me knowing. Anyways, just looking for some opinions for people who have maybe gone down this kinda road. It seems like remote-server-dependent-software would be one of the most effective copy-protection mechanisms, not just because of difficulty of circumventing, but also could be pretty easy to manage the licenses on the developers end.

  Read the article

• I can connect to Samba server but cannot access shares.

  - by jlego

  I'm having trouble getting samba sharing working to access shares. I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. It needs to be able to share files with a Windows 7 PC and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool on Fedora. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error: 0x80070035 " Windows cannot access \\SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error: The original item for ShareName cannot be found. When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: I Figured it out, it was because I was sharing a second hard drive. See checked answer below. Speculation 1: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? Speculation 2: As the directory I am trying to share is actually an entire internal disk, I have tried these things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. Speculation 3: Whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Speculation 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. Speculation 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally)

  Read the article

• Why does my ping command (Windows) results alternate between "timeout" and "network is not reachable"?

  - by Sopalajo de Arrierez

  My Windows is in Spanish, so I will have to paste console outputs in that language (I think that translating without knowing the exact terms used in english versions could give worse results than leaving it as it appears on screen). This is the issue: when pinging a non-existent IP from a WinXP-SP3 machine (clean Windows install, just formatted), I get sometimes a "Timeout" result, and sometimes a "network is not reachable" message. This is the result of: ping 192.168.210.1 Haciendo ping a 192.168.210.1 con 32 bytes de datos: Tiempo de espera agotado para esta solicitud. Respuesta desde 80.58.67.86: Red de destino inaccesible. Respuesta desde 80.58.67.86: Red de destino inaccesible. Tiempo de espera agotado para esta solicitud. Estadísticas de ping para 192.168.210.1: Paquetes: enviados = 4, recibidos = 2, perdidos = 2 (50% perdidos), Tiempos aproximados de ida y vuelta en milisegundos: Mínimo = 0ms, Máximo = 0ms, Media = 0ms 192.168.210.1 does not exist on the network. DHCP client is enabled, and the computer gets assigned those network config by the router. My IP: 192.168.11.2 Netmask: 255.255.255.0 Gateway: 192.168.11.1 DNS: 80.58.0.33/194.224.52.36 This is the output from "route print command": =========================================================================== Rutas activas: Destino de red Máscara de red Puerta de acceso Interfaz Métrica 0.0.0.0 0.0.0.0 192.168.11.1 192.168.11.2 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.11.0 255.255.255.0 192.168.11.2 192.168.11.2 20 192.168.11.2 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.11.255 255.255.255.255 192.168.11.2 192.168.11.2 20 224.0.0.0 240.0.0.0 192.168.11.2 192.168.11.2 20 255.255.255.255 255.255.255.255 192.168.11.2 192.168.11.2 1 255.255.255.255 255.255.255.255 192.168.11.2 3 1 Puerta de enlace predeterminada: 192.168.11.1 =========================================================================== Rutas persistentes: ninguno The output of: ping 1.1.1.1 Haciendo ping a 1.1.1.1 con 32 bytes de datos: Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Estadísticas de ping para 1.1.1.1: Paquetes: enviados = 4, recibidos = 0, perdidos = 4 1.1.1.1 does not exist on the network. and the output of: ping 10.1.1.1 Haciendo ping a 10.1.1.1 con 32 bytes de datos: Respuesta desde 80.58.67.86: Red de destino inaccesible. Tiempo de espera agotado para esta solicitud. Tiempo de espera agotado para esta solicitud. Respuesta desde 80.58.67.86: Red de destino inaccesible. Estadísticas de ping para 10.1.1.1: Paquetes: enviados = 4, recibidos = 2, perdidos = 2 (50% perdidos), 10.1.1.1 does not exist on the network. I can do some aproximate translation of what you demand if necessary. I have another computers in the same network (WinXP-SP3 and Win7-SP1), and they have, too, this problem. Gateway (Router): Buffalo WHR-HP-GN (official Buffalo firmware, not DD-WRT). I have some Linux (Debian/Kali) machine in my network, so I tested things on it: ping 192.168.210.1 PING 192.168.210.1 (192.168.210.1) 56(84) bytes of data. From 80.58.67.86 icmp_seq=1 Packet filtered From 80.58.67.86 icmp_seq=2 Packet filtered From 80.58.67.86 icmp_seq=3 Packet filtered From 80.58.67.86 icmp_seq=4 Packet filtered to the non-existing 1.1.1.1 : ping 1.1.1.1 PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data. ^C --- 1.1.1.1 ping statistics --- 153 packets transmitted, 0 received, 100% packet loss, time 153215ms (no response after waiting a few minutes). and the non-existing 10.1.1.1: ping 10.1.1.1 PING 10.1.1.1 (10.1.1.1) 56(84) bytes of data. From 80.58.67.86 icmp_seq=20 Packet filtered From 80.58.67.86 icmp_seq=22 Packet filtered From 80.58.67.86 icmp_seq=23 Packet filtered From 80.58.67.86 icmp_seq=24 Packet filtered From 80.58.67.86 icmp_seq=25 Packet filtered What is going on here? I am posing this question mainly for learning purposes, but there is another reason: when all pings are returning "timeout", it creates an %ERRORLEVEL% value of 1, but if there is someone of "Network is not reachable" type, %ERRORLEVEL% goes to 0 (no error), and this could be inappropriate for a shell script (we can not use ping to detect, for example, if the network is down due to loss of contact with the gateway).

  Read the article

• Remotely Schedule and Stream Recorded TV in Windows 7 Media Center

  - by DigitalGeekery

  Have you ever been away from home and suddenly realized you forgot to record your favorite program? Now Windows 7 Media Center, users can schedule recordings remotely from their phones or mobile devices with Remote Potato. How it Works Remote Potato installs server software on the host computer running Windows 7 Media Center. Once the software is installed, we’ll need to do some port forwarding on the router and setup an optional dynamic DNS address. When setup is completed, we will access the application through a web based interface. Silverlight is required for Streaming recorded TV, but scheduling recordings can be done through an HTML interface. Installing Remote Potato Download and install Remote Potato on the Media Center PC. (See download link below) If you plan to stream any Recorded TV, you’ll also want to install the streaming pack located on the same page. It isn’t required to stream all shows, only shows that require the AC3 audio codec. Click Yes to allow Remote Potato to add rules to the Windows Firewall for remote access. You’ll likely need to accept a few UAC prompts. When notified that the rules were added, click OK. Remote Potato will then prompt you to allow administrator privileges to reserve a URL for it’s web server. Click Yes. Remote Potato server will start. Click on the configuration button at the right to to reveal the settings tabs.   One the General tab, you’ll have the option to run Remote Potato on startup and minimized in the System Tray. If you’re running Media Center on a dedicated HTPC, you’ll probably want to enable both startup options. Forwarding Ports on Your Router You’ll need to forward a couple ports on your router. By default, these will be ports 9080 and 9081. In this example we’re using a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Applications & Gaming Tab, and then the Port Range Forward tab. Under Application, type in a name of your choosing. In both the Start and End boxes, type the port number 9080. Enter the local IP address of your Media Center computer in the IP address column. Click the check box under Enable. Repeat the process on the next line, but this time use port 9081. When finished, click the Save Settings button. Note: It’s highly recommended that you configure the home computer running Media Center & Remote Potato with a static IP address.   Find your IP Address You’ll need to find the IP address assigned to your router from your ISP. There are many ways to do this but a quick and easy way is to visit a site like checkip.dyndns.org (link available below) The current external IP address of your router will be displayed in the browser.   Dynamic DNS This is an optional step, but  it’s highly recommended. Many routers, such as the Linksys WRT54GL we are using, support Dynamic DNS (DDNS). What Dynamic DNS allows you to do is affiliate your home router’s external IP address to a domain name. Every time your home router is assigned a a new IP address by your ISP, the domain name is updated to point to your new IP address. Remote Potato’s user interface is accessed over the Internet is by connecting to your router’s IP address followed by a colon and the port number. (Ex: XXX.XXX.XXX.XXX:9080) Instead of constantly having to look up and remember an IP address, you can use DDNS along with a 3rd party provider like DynDNS.com, to sign up for a free domain name and configure it to be updated each time your router is assigned a new IP address. Go to the DynDNS.com website (See link at the end of the article) and sign up for a free Domain name. You’ll need to register and confirm by email.   Once you’ve signed in and selected your domain name click Activate Services. You’ll get a confirmation message that your domain name has been activated.    On the Linksys WRT54GL click on the Setup tab an then DDNS. Select DynDNS.org, or TZO.com if you prefer to use their service, from the drop down list.   With DynDNS, you’ll need to fill in your username and password you signed up with at the DynDNS website and the hostname you chose. Note: You can connect over your local network with the IP Address of the computer running Remote Potato followed by a colon and the port number. Ex: 192.168.1.2:9080 Logging in Remote Potato and Recording a Show Once you connect, you’ll see the start page. To view the TV listings, click on TV Guide. You’ll then see your guide listings. There are a few ways to navigate the listings. At the top left, you can click on any of the preset time buttons to jump to  the listings at that time of the day.  Click on the arrows to the right and left of the day and date at the top center to proceed to the previous or next day. Or, jump to a specific day with the date and date buttons at the top right.   To setup a recording, click on a program.   You can choose to record the individual show or the entire series by clicking on Record Show or Record Series.   Remote Potato on Mobile Devices Perhaps the coolest feature of Remote Potato is the ability to schedule recording from your phone or mobile device. Note: For any devices or computers without Silverlight, you will be prompted to view the HTML page. Select Browse Listings. Select your program to record. In the Program Details, select Record Show to record the single episode or Record Series to record all instances of the series. You will then see a red dot on the program listing to indicate that the show is scheduled for recording.   Streaming Recorded TV Click on Recorded TV from the home screen to access your previously recorded TV programs. Click on the selection you wish to stream. Click on Play. If you receive this error message, you’ll need to install the streaming pack for Remote Potato. This is found on the same download page as installation files. (See link below) The Begin from slider allows you to start playback from the start (by default) or a different time of the program by moving the slider. The Quality (bitrate) setting  allows you to choose the quality of the playback. We found the video quality on the Normal setting to be pretty lousy, and Low was just pointless. High was the best overall viewing experience as it provided smooth quality video playback. We experienced significant stuttering during playback using the Ultra High setting.   Click Start when you are ready to begin. When playback begins you’ll see a slider at the top right.   Move the slider left or right to increase or decrease the size of the video. There’s also a button to switch to full screen.   Media Center users who travel frequently or are always on the go will likely find Remote Potato to be a blessing. Since being released earlier this year, updates for Remote Potato have come fast and furious. The latest beta release includes support for streaming music and photos. If you like those nice network TV logos, check out our article on adding TV channel logos to Windows Media Center. Downloads and Links Download Remote Potato and Streaming Pack Find your IP address Sign Up for a Domain Name at DynDNS.com Similar Articles Productive Geek Tips Schedule Updates for Windows Media CenterUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Add a Sleep Timer to Windows 7 Media CenterStartup Customizations for Media Center in Windows 7Enable Media Streaming in Windows Home Server to Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos

  Read the article

• How To Run XP Mode in VirtualBox on Windows 7 (sort of)

  - by Matthew Guay

  A few weeks ago we showed you how to run XP Mode on a Windows 7 computer without Hardware Virtualization using VMware. Some of you have been asking if it can be done in Virtual Box as well. The answer is “Yes!” and here we’ll show you how. Editor Update: Apparently there isn’t a way to activate XP Mode through VirtualBox using this method. You will however, be able to run it for 30 days. We have a new updated article on how to Install XP Mode with VirtualBox Using the VMLite Plugin.   Earlier we showed you how to run XP mode on windows 7 machines without hardware virtualization capability. Since then, a lot of you have been asking to a write up a tutorial about doing the same thing using VirtualBox.  This makes it another great way to run XP Mode if your computer does not have hardware virtualization.  Here we’ll see how to import the XP Mode from Windows 7 Professional, Enterprise, or Ultimate into VirtualBox so you can run XP in it for free. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. In our tests we were able to get it to run on Home Premium as well, but you’ll be breaking Windows 7 licensing agreements. Getting Started First, download and install XP Mode (link below).  There is no need to download Virtual PC if your computer cannot run it, so just download the XP Mode from the link on the left. Install XP mode; just follow the default prompts as usual. Now, download and install VirtualBox 3.1.2 or higher(link below).  Install as normal, and simply follow the default prompts. VirtualBox may notify you that your network connection will be reset during the installation.  Press Yes to continue. During the install, you may see several popups asking you if you wish to install device drivers for USB and Network interfaces.  Simply click install, as these are needed for VirtualBox to run correctly. Setup only took a couple minutes, and doesn’t require a reboot. Setup XP Mode in VirtualBox: First we need to copy the default XP Mode so VirtualBox will not affect the original copy.  Browse to C:\Program Files\Windows XP Mode, and copy the file “Windows XP Mode base.vhd”.  Paste it in another folder of your choice, such as your Documents folder. Once you’ve copied the file, right-click on it and click Properties. Uncheck the “Read-only” box in this dialog, and then click Ok. Now, in VirtualBox, click New to create a new virtual machine. Enter the name of your virtual machine, and make sure the operating system selected is Windows XP. Choose how much memory you want to allow the virtual machine to use.  VirtualBox’ default is 192 Mb ram, but for better performance you can select 256 or 512Mb. Now, select the hard drive for the virtual machine.  Select “Use existing hard disk”, then click the folder button to choose the XP Mode virtual drive. In this window, click Add, and then browse to find the copy of XP Mode you previously made. Make sure the correct virtual drive is selected, then press Select. After selecting the VHD your screen should look like the following then click Next. Verify the settings you made are correct. If not, you can go back and make any changes. When everything looks correct click Finish. Setup XP Mode Now, in VirtualBox, click start to run XP Mode. The Windows XP in this virtual drive is not fully setup yet, so you will have to go through the setup process.   If you didn’t uncheck the “Read-only” box in the VHD properties before, you may see the following error.  If you see it, go back and check the file to makes sure it is not read-only. When you click in the virtual machine, it will capture your mouse by default.  Simply press the right Ctrl key to release your mouse so you can go back to using Windows 7.  This will only be the case during the setup process; after the Guest Additions are installed, the mouse will seamlessly move between operating systems. Now, accept the license agreement in XP.   Choose your correct locale and keyboard settings. Enter a name for your virtual XP, and an administrative password. Check the date, time, and time zone settings, and adjust them if they are incorrect.  The time and date are usually correct, but the time zone often has to be corrected. XP will now automatically finish setting up your virtual machine, and then will automatically reboot. After rebooting, select your automatic update settings. You may see a prompt to check for drivers; simply press cancel, as all the drivers we need will be installed later with the Guest Additions. Your last settings will be finalized, and finally you will see your XP desktop in VirtualBox. Please note that XP Mode may not remain activated after importing it into VirtualBox. When you activate it, use the key that is located at C:\Program Files\Windows XP Mode\key.txt.  Note: During our tests we weren’t able to get the activation to go through. We are looking into the issue and will have a revised article showing the correct way to get XP Mode in VirutalBox working correctly soon.    Now we have one final thing to install – the VirtualBox Guest Additions.  In the VirtualBox window, click “Devices” and then select “Install Guest Additions”. This should automatically launch in XP; if it doesn’t, click Start, then My Computer, and finally double-click on the CD drive which should say VirtualBox Guest Additions. Simply install with the normal presets. You can select to install an experimental 3D graphics driver if you wish to try to run games in XP in VirtualBox; however, do note that this is not fully supported and is currently a test feature. You may see a prompt informing you that the drivers have not passed Logo testing; simply press “Continue Anyway” to proceed with the installation.   When installation has completed, you will be required to reboot your virtual machine. Now, you can move your mouse directly from Windows XP to Windows 7 without pressing Ctrl. Integrating with Windows 7 Once your virtual machine is rebooted, you can integrate it with your Windows 7 desktop.  In the VirtualBox window, click Machine and then select “Seamless Mode”.   In Seamless mode you’ll have the XP Start menu and taskbar sit on top of your Windows 7 Start and Taskbar. Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. Another view of everything running seamlessly together on the same Windows 7 desktop. Hover the pointer over the XP taskbar to pull up the Virtual Box menu items. You can exit out of Seamless Mode from the VirtualBox menu or using “Ctrl+L”. Then you go back to having it run separately on your desktop again. Conclusion Running XP Mode in a Virtual Machine is a great way to experience the feature on computers without Hardware Virtualization capabilities. If you prefer VMware Player, then you’ll want to check out our articles on how to run XP Mode on Windows 7 machines without Hardware Virtualization, and how to create an XP Mode for Windows 7 Home Premium and Vista. Download VirtualBox Download XP Mode Similar Articles Productive Geek Tips Install XP Mode with VirtualBox Using the VMLite PluginUsing Windows 7 or Vista Compatibility ModeMake Safari Stop Crashing Every 20 Seconds on Windows VistaForce Windows 7 / Vista to Boot Into Safe Mode Without Using the F8 KeyHow To Run Chrome OS in VirtualBox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• How To Run XP Mode in VirtualBox on Windows 7 (sort of)

  - by Matthew Guay

  A few weeks ago we showed you how to run XP Mode on a Windows 7 computer without Hardware Virtualization using VMware. Some of you have been asking if it can be done in Virtual Box as well. The answer is “Yes!” and here we’ll show you how. Editor Update: Apparently there isn’t a way to activate XP Mode through VirtualBox using this method. You will however, be able to run it for 30 days. We have a new updated article on how to Install XP Mode with VirtualBox Using the VMLite Plugin.   Earlier we showed you how to run XP mode on windows 7 machines without hardware virtualization capability. Since then, a lot of you have been asking to a write up a tutorial about doing the same thing using VirtualBox.  This makes it another great way to run XP Mode if your computer does not have hardware virtualization.  Here we’ll see how to import the XP Mode from Windows 7 Professional, Enterprise, or Ultimate into VirtualBox so you can run XP in it for free. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. In our tests we were able to get it to run on Home Premium as well, but you’ll be breaking Windows 7 licensing agreements. Getting Started First, download and install XP Mode (link below).  There is no need to download Virtual PC if your computer cannot run it, so just download the XP Mode from the link on the left. Install XP mode; just follow the default prompts as usual. Now, download and install VirtualBox 3.1.2 or higher(link below).  Install as normal, and simply follow the default prompts. VirtualBox may notify you that your network connection will be reset during the installation.  Press Yes to continue. During the install, you may see several popups asking you if you wish to install device drivers for USB and Network interfaces.  Simply click install, as these are needed for VirtualBox to run correctly. Setup only took a couple minutes, and doesn’t require a reboot. Setup XP Mode in VirtualBox: First we need to copy the default XP Mode so VirtualBox will not affect the original copy.  Browse to C:\Program Files\Windows XP Mode, and copy the file “Windows XP Mode base.vhd”.  Paste it in another folder of your choice, such as your Documents folder. Once you’ve copied the file, right-click on it and click Properties. Uncheck the “Read-only” box in this dialog, and then click Ok. Now, in VirtualBox, click New to create a new virtual machine. Enter the name of your virtual machine, and make sure the operating system selected is Windows XP. Choose how much memory you want to allow the virtual machine to use.  VirtualBox’ default is 192 Mb ram, but for better performance you can select 256 or 512Mb. Now, select the hard drive for the virtual machine.  Select “Use existing hard disk”, then click the folder button to choose the XP Mode virtual drive. In this window, click Add, and then browse to find the copy of XP Mode you previously made. Make sure the correct virtual drive is selected, then press Select. After selecting the VHD your screen should look like the following then click Next. Verify the settings you made are correct. If not, you can go back and make any changes. When everything looks correct click Finish. Setup XP Mode Now, in VirtualBox, click start to run XP Mode. The Windows XP in this virtual drive is not fully setup yet, so you will have to go through the setup process.   If you didn’t uncheck the “Read-only” box in the VHD properties before, you may see the following error.  If you see it, go back and check the file to makes sure it is not read-only. When you click in the virtual machine, it will capture your mouse by default.  Simply press the right Ctrl key to release your mouse so you can go back to using Windows 7.  This will only be the case during the setup process; after the Guest Additions are installed, the mouse will seamlessly move between operating systems. Now, accept the license agreement in XP.   Choose your correct locale and keyboard settings. Enter a name for your virtual XP, and an administrative password. Check the date, time, and time zone settings, and adjust them if they are incorrect.  The time and date are usually correct, but the time zone often has to be corrected. XP will now automatically finish setting up your virtual machine, and then will automatically reboot. After rebooting, select your automatic update settings. You may see a prompt to check for drivers; simply press cancel, as all the drivers we need will be installed later with the Guest Additions. Your last settings will be finalized, and finally you will see your XP desktop in VirtualBox. Please note that XP Mode may not remain activated after importing it into VirtualBox. When you activate it, use the key that is located at C:\Program Files\Windows XP Mode\key.txt.  Note: During our tests we weren’t able to get the activation to go through. We are looking into the issue and will have a revised article showing the correct way to get XP Mode in VirutalBox working correctly soon.    Now we have one final thing to install – the VirtualBox Guest Additions.  In the VirtualBox window, click “Devices” and then select “Install Guest Additions”. This should automatically launch in XP; if it doesn’t, click Start, then My Computer, and finally double-click on the CD drive which should say VirtualBox Guest Additions. Simply install with the normal presets. You can select to install an experimental 3D graphics driver if you wish to try to run games in XP in VirtualBox; however, do note that this is not fully supported and is currently a test feature. You may see a prompt informing you that the drivers have not passed Logo testing; simply press “Continue Anyway” to proceed with the installation.   When installation has completed, you will be required to reboot your virtual machine. Now, you can move your mouse directly from Windows XP to Windows 7 without pressing Ctrl. Integrating with Windows 7 Once your virtual machine is rebooted, you can integrate it with your Windows 7 desktop.  In the VirtualBox window, click Machine and then select “Seamless Mode”.   In Seamless mode you’ll have the XP Start menu and taskbar sit on top of your Windows 7 Start and Taskbar. Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. Another view of everything running seamlessly together on the same Windows 7 desktop. Hover the pointer over the XP taskbar to pull up the Virtual Box menu items. You can exit out of Seamless Mode from the VirtualBox menu or using “Ctrl+L”. Then you go back to having it run separately on your desktop again. Conclusion Running XP Mode in a Virtual Machine is a great way to experience the feature on computers without Hardware Virtualization capabilities. If you prefer VMware Player, then you’ll want to check out our articles on how to run XP Mode on Windows 7 machines without Hardware Virtualization, and how to create an XP Mode for Windows 7 Home Premium and Vista. Download VirtualBox Download XP Mode Similar Articles Productive Geek Tips Install XP Mode with VirtualBox Using the VMLite PluginUsing Windows 7 or Vista Compatibility ModeMake Safari Stop Crashing Every 20 Seconds on Windows VistaForce Windows 7 / Vista to Boot Into Safe Mode Without Using the F8 KeyHow To Run Chrome OS in VirtualBox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• How to Upgrade Your Netbook to Windows 7 Home Premium

  - by Matthew Guay

  Would you like more features and flash in Windows on your netbook?  Here’s how you can easily upgrade your netbook to Windows 7 Home Premium the easy way. Most new netbooks today ship with Windows 7 Starter, which is the cheapest edition of Windows 7.  It is fine for many computing tasks, and will run all your favorite programs great, but it lacks many customization, multimedia, and business features found in higher editions.  Here we’ll show you how you can quickly upgrade your netbook to more full-featured edition of Windows 7 using Windows Anytime Upgrade.  Also, if you want to upgrade your laptop or desktop to another edition of Windows 7, say Professional, you can follow these same steps to upgrade it, too. Please note: This is only for computers already running Windows 7.  If your netbook is running XP or Vista, you will have to run a traditional upgrade to install Windows 7. Upgrade Advisor First, let’s make sure your netbook can support the extra features, such as Aero Glass, in Windows 7 Home Premium.  Most modern netbooks that ship with Windows 7 Starter can run the advanced features in Windows 7 Home Premium, but let’s check just in case.  Download the Windows 7 Upgrade Advisor (link below), and install as normal. Once it’s installed, run it and click Start Check.   Make sure you’re connected to the internet before you run the check, or otherwise you may see this error message.  If you see it, click Ok and then connect to the internet and start the check again. It will now scan all of your programs and hardware to make sure they’re compatible with Windows 7.  Since you’re already running Windows 7 Starter, it will also tell you if your computer will support the features in other editions of Windows 7. After a few moments, the Upgrade Advisor will show you want it found.  Here we see that our netbook, a Samsung N150, can be upgraded to Windows 7 Home Premium, Professional, or Ultimate. We also see that we had one issue, but this was because a driver we had installed was not recognized.  Click “See all system requirements” to see what your netbook can do with the new edition. This shows you which of the requirements, including support for Windows Aero, your netbook meets.  Here our netbook supports Aero, so we’re ready to go upgrade. For more, check out our article on how to make sure your computer can run Windows 7 with Upgrade Advisor. Upgrade with Anytime Upgrade Now, we’re ready to upgrade our netbook to Windows 7 Home Premium.  Enter “Anytime Upgrade” in the Start menu search,and select Windows Anytime Upgrade. Windows Anytime Upgrade lets you upgrade using product key you already have or one you purchase during the upgrade process.  And, it installs without any downloads or Windows disks, so it works great even for netbooks without DVD drives. Anytime Upgrades are cheaper than a standard upgrade, and for a limited time, select retailers in the US are offering Anytime Upgrades to Windows 7 Home Premium for only $49.99 if purchased with a new netbook.  If you already have a netbook running Windows 7 Starter, you can either purchase an Anytime Upgrade package at a retail store or purchase a key online during the upgrade process for $79.95.  Or, if you have a standard Windows 7 product key (full or upgrade), you can use it in Anytime upgrade.  This is especially nice if you can purchase Windows 7 cheaper through your school, university, or office. Purchase an upgrade online To purchase an upgrade online, click “Go online to choose the edition of Windows 7 that’s best for you”.   Here you can see a comparison of the features of each edition of Windows 7.  Note that you can upgrade to either Home Premium, Professional, or Ultimate.  We chose home Premium because it has most of the features that home users want, including Media Center and Aero Glass effects.  Also note that the price of each upgrade is cheaper than the respective upgrade from Windows XP or Vista.  Click buy under the edition you want.   Enter your billing information, then your payment information.  Once you confirm your purchase, you will directly be taken to the Upgrade screen.  Make sure to save your receipt, as you will need the product key if you ever need to reinstall Windows on your computer. Upgrade with an existing product key If you purchased an Anytime Upgrade kit from a retailer, or already have a Full or Upgrade key for another edition of Windows 7, choose “Enter an upgrade key”. Enter your product key, and click Next.  If you purchased an Anytime Upgrade kit, the product key will be located on the inside of the case on a yellow sticker. The key will be verified as a valid key, and Anytime Upgrade will automatically choose the correct edition of Windows 7 based on your product key.  Click Next when this is finished. Continuing the Upgrade process Whether you entered a key or purchased a key online, the process is the same from here on.  Click “I accept” to accept the license agreement. Now, you’re ready to install your upgrade.  Make sure to save all open files and close any programs, and then click Upgrade. The upgrade only takes about 10 minutes in our experience but your mileage may vary.  Any available Microsoft updates, including ones for Office, Security Essentials, and other products, will be installed before the upgrade takes place. After a couple minutes, your computer will automatically reboot and finish the installation.  It will then reboot once more, and your computer will be ready to use!  Welcome to your new edition of Windows 7! Here’s a before and after shot of our desktop.  When you do an Anytime Upgrade, all of your programs, files, and settings will be just as they were before you upgraded.  The only change we noticed was that our pinned taskbar icons were slightly rearranged to the default order of Internet Explorer, Explorer, and Media Player.  Here’s a shot of our desktop before the upgrade.  Notice that all of our pinned programs and desktop icons are still there, as well as our taskbar customization (we are using small icons on the taskbar instead of the default large icons). Before, with the Windows 7 Starter background and the Aero Basic theme: And after, with Aero Glass and the more colorful default Windows 7 background.   All of the features of Windows 7 Home Premium are now ready to use.  The Aero theme was activate by default, but you can now customize your netbook theme, background, and more with the Personalization pane.  To open it, right-click on your desktop and select Personalize. You can also now use Windows Media Center, and can play-back DVD movies using an external drive. One of our favorite tools, the Snipping Tool, is also now available for easy screenshots and clips. Activating you new edition of Windows 7 You will still need to activate your new edition of Windows 7.  To do this right away, open the start menu, right-click on Computer, and select Properties.   Scroll to the bottom, and click “Activate Windows Now”. Make sure you’re connected to the internet, and then select “Activate Windows online now”. Activation may take a few minutes, depending on your internet connection speed. When it is done, the Activation wizard will let you know that Windows is activated and genuine.  Your upgrade is all finished! Conclusion Windows Anytime Upgrade makes it easy, and somewhat cheaper, to upgrade to another edition of Windows 7.  It’s useful for desktop and laptop owners who want to upgrade to Professional or Ultimate, but many more netbook owners will want to upgrade from Starter to Home Premium or another edition.  Links Download the Windows 7 Upgrade Advisor Windows Team Blog: Anytime Upgrade Special with new PC purchase Similar Articles Productive Geek Tips How To Upgrade from Vista to Windows 7 Home Premium EditionAnother Blog You Should Subscribe ToMysticgeek Blog: Turn Vista Home Premium Into Ultimate (Part 3) – Shadow CopyUpgrade Ubuntu from Breezy to DapperHow to Upgrade the Windows 7 RC to RTM (Final Release) TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday

  Read the article

• Visual Studio 2013 Static Code Analysis in depth: What? When and How?

  - by Hosam Kamel

  In this post I'll illustrate in details the following points What is static code analysis? When to use? Supported platforms Supported Visual Studio versions How to use Run Code Analysis Manually Run Code Analysis Automatically Run Code Analysis while check-in source code to TFS version control (TFSVC) Run Code Analysis as part of Team Build Understand the Code Analysis results & learn how to fix them Create your custom rule set Q & A References What is static Rule analysis? Static Code Analysis feature of Visual Studio performs static code analysis on code to help developers identify potential design, globalization, interoperability, performance, security, and a lot of other categories of potential problems according to Microsoft's rules that mainly targets best practices in writing code, and there is a large set of those rules included with Visual Studio grouped into different categorized targeting specific coding issues like security, design, Interoperability, globalizations and others. Static here means analyzing the source code without executing it and this type of analysis can be performed through automated tools (like Visual Studio 2013 Code Analysis Tool) or manually through Code Review which already supported in Visual Studio 2012 and 2013 (check Using Code Review to Improve Quality video on Channel9) There is also Dynamic analysis which performed on executing programs using software testing techniques such as Code Coverage for example. When to use? Running Code analysis tool at regular intervals during your development process can enhance the quality of your software, examines your code for a set of common defects and violations is always a good programming practice. Adding that Code analysis can also find defects in your code that are difficult to discover through testing allowing you to achieve first level quality gate for you application during development phase before you release it to the testing team. Supported platforms .NET Framework, native (C and C++) Database applications. Support Visual Studio versions All version of Visual Studio starting Visual Studio 2013 (except Visual Studio Test Professional) check Feature comparisons Create and modify a custom rule set required Visual Studio Premium or Ultimate. How to use? Code Analysis can be run manually at any time from within the Visual Studio IDE, or even setup to automatically run as part of a Team Build or check-in policy for Team Foundation Server. Run Code Analysis Manually To run code analysis manually on a project, on the Analyze menu, click Run Code Analysis on your project or simply right click on the project name on the Solution Explorer choose Run Code Analysis from the context menu Run Code Analysis Automatically To run code analysis each time that you build a project, you select Enable Code Analysis on Build on the project's Property Page Run Code Analysis while check-in source code to TFS version control (TFSVC) Team Foundation Version Control (TFVC) provides a way for organizations to enforce practices that lead to better code and more efficient group development through Check-in policies which are rules that are set at the team project level and enforced on developer computers before code is allowed to be checked in. (This is available only if you're using Team Foundation Server) Require permissions on Team Foundation Server: you must have the Edit project-level information permission set to Allow typically your account must be part of Project Administrators, Project Collection Administrators, for more information about Team Foundation permissions check http://msdn.microsoft.com/en-us/library/ms252587(v=vs.120).aspx In Team Explorer, right-click the team project name, point to Team Project Settings, and then click Source Control. In the Source Control dialog box, select the Check-in Policy tab. Click Add to create a new check-in policy. Double-click the existing Code Analysis item in the Policy Type list to change the policy. Check or Uncheck the policy option based on the configurations you need to perform as illustrated below: Enforce check-in to only contain files that are part of current solution: code analysis can run only on files specified in solution and project configuration files. This policy guarantees that all code that is part of a solution is analyzed. Enforce C/C++ Code Analysis (/analyze): Requires that all C or C++ projects be built with the /analyze compiler option to run code analysis before they can be checked in. Enforce Code Analysis for Managed Code: Requires that all managed projects run code analysis and build before they can be checked in. Check Code analysis rule set reference on MSDN What is Rule Set? Rule Set is a group of code analysis rules like the example below where Microsoft.Design is the rule set name where "Do not declare static members on generic types" is the code analysis rule Once you configured the Analysis rule the policy will be enabled for all the team member in this project whenever a team member check-in any source code to the TFSVC the policy section will highlight the Code Analysis policy as below TFS is a very extensible platform so you can simply implement your own custom Code Analysis Check-in policy, check this link for more details http://msdn.microsoft.com/en-us/library/dd492668.aspx but you have to be aware also about compatibility between different TFS versions check http://msdn.microsoft.com/en-us/library/bb907157.aspx Run Code Analysis as part of Team Build With Team Foundation Build (TFBuild), you can create and manage build processes that automatically compile and test your applications, and perform other important functions. Code Analysis can be enabled in the Build Definition file by selecting the correct value for the build process parameter "Perform Code Analysis" Once configure, Kick-off your build definition to queue a new build, Code Analysis will run as part of build workflow and you will be able to see code analysis warning as part of build report Understand the Code Analysis results & learn how to fix them Now after you went through Code Analysis configurations and the different ways of running it, we will go through the Code Analysis result how to understand them and how to resolve them. Code Analysis window in Visual Studio will show all the analysis results based on the rule sets you configured in the project file properties, let's dig deep into what each result item contains: 1 Check ID The unique identifier for the rule. CheckId and Category are used for in-source suppression of a warning.       2 Title The title of warning message       3 Description A description of the problem or suggested fix 4 File Name File name and the line of code number which violate the code analysis rule set 5 Category The code analysis category for this error 6 Warning /Error Depend on how you configure it in the rule set the default is Warning level 7 Action Copy: copy the warning information to the clipboard Create Work Item: If you're connected to Team Foundation Server you can create a work item most probably you may create a Task or Bug and assign it for a developer to fix certain code analysis warning Suppress Message: There are times when you might decide not to fix a code analysis warning. You might decide that resolving the warning requires too much recoding in relation to the probability that the issue will arise in any real-world implementation of your code. Or you might believe that the analysis that is used in the warning is inappropriate for the particular context. You can suppress individual warnings so that they no longer appear in the Code Analysis window. Two options available: In Source inserts a SuppressMessage attribute in the source file above the method that generated the warning. This makes the suppression more discoverable. In Suppression File adds a SuppressMessage attribute to the GlobalSuppressions.cs file of the project. This can make the management of suppressions easier. Note that the SuppressMessage attribute added to GlobalSuppression.cs also targets the method that generated the warning. It does not suppress the warning globally.       Visual Studio makes it very easy to fix Code analysis warning, all you have to do is clicking on the Check Id hyperlink if you are not aware how to fix the warring and you'll be directed to MSDN online or local copy based on the configuration you did while installing Visual Studio and you will find all the information about the warring including how to fix it. Create a Custom Code Analysis Rule Set The Microsoft standard rule sets provide groups of rules that are organized by function and depth. For example, the Microsoft Basic Design Guidelines Rules and the Microsoft Extended Design Guidelines Rules contain rules that focus on usability and maintainability issues, with added emphasis on naming rules in the Extended rule set, you can create and modify a custom rule set to meet specific project needs associated with code analysis. To create a custom rule set, you open one or more standard rule sets in the rule set editor. Create and modify a custom rule set required Visual Studio Premium or Ultimate. You can check How to: Create a Custom Rule Set on MSDN for more details http://msdn.microsoft.com/en-us/library/dd264974.aspx Q & A Visual Studio static code analysis vs. FxCop vs. StyleCpp http://www.excella.com/blog/stylecop-vs-fxcop-difference-between-code-analysis-tools/ Code Analysis for SharePoint Apps and SPDisposeCheck? This post lists some of the rule set you can run specifically for SharePoint applications and how to integrate SPDisposeCheck as well. Code Analysis for SQL Server Database Projects? This post illustrate how to run static code analysis on T-SQL through SSDT ReSharper 8 vs. Visual Studio 2013? This document lists some of the features that are provided by ReSharper 8 but are missing or not as fully implemented in Visual Studio 2013. References A Few Billion Lines of Code Later: Using Static Analysis to Find Bugs in the Real World http://cacm.acm.org/magazines/2010/2/69354-a-few-billion-lines-of-code-later/fulltext What is New in Code Analysis for Visual Studio 2013 http://blogs.msdn.com/b/visualstudioalm/archive/2013/07/03/what-is-new-in-code-analysis-for-visual-studio-2013.aspx Analyze the code quality of Windows Store apps using Visual Studio static code analysis http://msdn.microsoft.com/en-us/library/windows/apps/hh441471.aspx [Hands-on-lab] Using Code Analysis with Visual Studio 2012 to Improve Code Quality http://download.microsoft.com/download/A/9/2/A9253B14-5F23-4BC8-9C7E-F5199DB5F831/Using%20Code%20Analysis%20with%20Visual%20Studio%202012%20to%20Improve%20Code%20Quality.docx Originally posted at "Hosam Kamel| Developer & Platform Evangelist" http://blogs.msdn.com/hkamel

  Read the article

• What You Need to Know About Windows 8.1

  - by Chris Hoffman

  Windows 8.1 is available to everyone starting today, October 19. The latest version of Windows improves on Windows 8 in every way. It’s a big upgrade, whether you use the desktop or new touch-optimized interface. The latest version of Windows has been dubbed “an apology” by some — it’s definitely more at home on a desktop PC than Windows 8 was. However, it also offers a more fleshed out and mature tablet experience. How to Get Windows 8.1 For Windows 8 users, Windows 8.1 is completely free. It will be available as a download from the Windows Store — that’s the “Store” app in the Modern, tiled interface. Assuming upgrading to the final version will be just like upgrading to the preview version, you’ll likely see a “Get Windows 8.1″ pop-up that will take you to the Windows Store and guide you through the download process. You’ll also be able to download ISO images of Windows 8.1, so can perform a clean install to upgrade. On any new computer, you can just install Windows 8.1 without going through Windows 8. New computers will start to ship with Windows 8.1 and boxed copies of Windows 8 will be replaced by boxed copies of Windows 8.1. If you’re using Windows 7 or a previous version of Windows, the update won’t be free. Getting Windows 8.1 will cost you the same amount as a full copy of Windows 8 — $120 for the standard version. If you’re an average Windows 7 user, you’re likely better off waiting until you buy a new PC with Windows 8.1 included rather than spend this amount of money to upgrade. Improvements for Desktop Users Some have dubbed Windows 8.1 “an apology” from Microsoft, although you certainly won’t see Microsoft referring to it this way. Either way, Steven Sinofsky, who presided over Windows 8′s development, left the company shortly after Windows 8 was released. Coincidentally, Windows 8.1 contains many features that Steven Sinofsky and Microsoft refused to implement. Windows 8.1 offers the following big improvements for desktop users: Boot to Desktop: You can now log in directly to the desktop, skipping the tiled interface entirely. Disable Top-Left and Top-Right Hot Corners: The app switcher and charms bar won’t appear when you move your mouse to the top-left or top-right corners of the screen if you enable this option. No more intrusions into the desktop. The Start Button Returns: Windows 8.1 brings back an always-present Start button on the desktop taskbar, dramatically improving discoverability for new Windows 8 users and providing a bigger mouse target for remote desktops and virtual machines. Crucially, the Start menu isn’t back — clicking this button will open the full-screen Modern interface. Start menu replacements will continue to function on Windows 8.1, offering more traditional Start menus. Show All Apps By Default: Luckily, you can hide the Start screen and its tiles almost entirely. Windows 8.1 can be configured to show a full-screen list of all your installed apps when you click the Start button, with desktop apps prioritized. The only real difference is that the Start menu is now a full-screen interface. Shut Down or Restart From Start Button: You can now right-click the Start button to access Shut down, Restart, and other power options in just as many clicks as you could on Windows 7. Shared Start Screen and Desktop Backgrounds; Windows 8 limited you to just a few Steven Sinofsky-approved background images for your Start screen, but Windows 8.1 allows you to use your desktop background on the Start screen. This can make the transition between the Start screen and desktop much less jarring. The tiles or shortcuts appear to be floating above the desktop rather than off in their own separate universe. Unified Search: Unified search is back, so you can start typing and search your programs, settings, and files all at once — no more awkwardly clicking between different categories when trying to open a Control Panel screen or search for a file. These all add up to a big improvement when using Windows 8.1 on the desktop. Microsoft is being much more flexible — the Start menu is full screen, but Microsoft has relented on so many other things and you’d never have to see a tile if you didn’t want to. For more information, read our guide to optimizing Windows 8.1 for a desktop PC. These are just the improvements specifically for desktop users. Windows 8.1 includes other useful features for everyone, such as deep SkyDrive integration that allows you to store your files in the cloud without installing any additional sync programs. Improvements for Touch Users If you have a Windows 8 or Windows RT tablet or another touch-based device you use the interface formerly known as Metro on, you’ll see many other noticeable improvements. Windows 8′s new interface was half-baked when it launched, but it’s now much more capable and mature. App Updates: Windows 8′s included apps were extremely limited in many cases. For example, Internet Explorer 10 could only display ten tabs at a time and the Mail app was a barren experience devoid of features. In Windows 8.1, some apps — like Xbox Music — have been redesigned from scratch, Internet Explorer allows you to display a tab bar on-screen all the time, while apps like Mail have accumulated quite a few useful features. The Windows Store app has been entirely redesigned and is less awkward to browse. Snap Improvements: Windows 8′s Snap feature was a toy, allowing you to snap one app to a small sidebar at one side of your screen while another app consumed most of your screen. Windows 8.1 allows you to snap two apps side-by-side, seeing each app’s full interface at once. On larger displays, you can even snap three or four apps at once. Windows 8′s ability to use multiple apps at once on a tablet is compelling and unmatched by iPads and Android tablets. You can also snap two of the same apps side-by-side — to view two web pages at once, for example. More Comprehensive PC Settings: Windows 8.1 offers a more comprehensive PC settings app, allowing you to change most system settings in a touch-optimized interface. You shouldn’t have to use the desktop Control Panel on a tablet anymore — or at least not as often. Touch-Optimized File Browsing: Microsoft’s SkyDrive app allows you to browse files on your local PC, finally offering a built-in, touch-optimized way to manage files without using the desktop. Help & Tips: Windows 8.1 includes a Help+Tips app that will help guide new users through its new interface, something Microsoft stubbornly refused to add during development. There’s still no “Modern” version of Microsoft Office apps (aside from OneNote), so you’ll still have to head to use desktop Office apps on tablets. It’s not perfect, but the Modern interface doesn’t feel anywhere near as immature anymore. Read our in-depth look at the ways Microsoft’s Modern interface, formerly known as Metro, is improved in Windows 8.1 for more information. In summary, Windows 8.1 is what Windows 8 should have been. All of these improvements are on top of the many great desktop features, security improvements, and all-around battery life and performance optimizations that appeared in Windows 8. If you’re still using Windows 7 and are happy with it, there’s probably no reason to race out and buy a copy of Windows 8.1 at the rather high price of $120. But, if you’re using Windows 8, it’s a big upgrade no matter what you’re doing. If you buy a new PC and it comes with Windows 8.1, you’re getting a much more flexible and comfortable experience. If you’re holding off on buying a new computer because you don’t want Windows 8, give Windows 8.1 a try — yes, it’s different, but Microsoft has compromised on the desktop while making a lot of improvements to the new interface. You just might find that Windows 8.1 is now a worthwhile upgrade, even if you only want to use the desktop.     

  Read the article

• How to Reuse Your Old Wi-Fi Router as a Network Switch

  - by Jason Fitzpatrick

  Just because your old Wi-Fi router has been replaced by a newer model doesn’t mean it needs to gather dust in the closet. Read on as we show you how to take an old and underpowered Wi-Fi router and turn it into a respectable network switch (saving your $20 in the process). Image by mmgallan. Why Do I Want To Do This? Wi-Fi technology has changed significantly in the last ten years but Ethernet-based networking has changed very little. As such, a Wi-Fi router with 2006-era guts is lagging significantly behind current Wi-Fi router technology, but the Ethernet networking component of the device is just as useful as ever; aside from potentially being only 100Mbs instead of 1000Mbs capable (which for 99% of home applications is irrelevant) Ethernet is Ethernet. What does this matter to you, the consumer? It means that even though your old router doesn’t hack it for your Wi-Fi needs any longer the device is still a perfectly serviceable (and high quality) network switch. When do you need a network switch? Any time you want to share an Ethernet cable among multiple devices, you need a switch. For example, let’s say you have a single Ethernet wall jack behind your entertainment center. Unfortunately you have four devices that you want to link to your local network via hardline including your smart HDTV, DVR, Xbox, and a little Raspberry Pi running XBMC. Instead of spending $20-30 to purchase a brand new switch of comparable build quality to your old Wi-Fi router it makes financial sense (and is environmentally friendly) to invest five minutes of your time tweaking the settings on the old router to turn it from a Wi-Fi access point and routing tool into a network switch–perfect for dropping behind your entertainment center so that your DVR, Xbox, and media center computer can all share an Ethernet connection. What Do I Need? For this tutorial you’ll need a few things, all of which you likely have readily on hand or are free for download. To follow the basic portion of the tutorial, you’ll need the following: 1 Wi-Fi router with Ethernet ports 1 Computer with Ethernet jack 1 Ethernet cable For the advanced tutorial you’ll need all of those things, plus: 1 copy of DD-WRT firmware for your Wi-Fi router We’re conducting the experiment with a Linksys WRT54GL Wi-Fi router. The WRT54 series is one of the best selling Wi-Fi router series of all time and there’s a good chance a significant number of readers have one (or more) of them stuffed in an office closet. Even if you don’t have one of the WRT54 series routers, however, the principles we’re outlining here apply to all Wi-Fi routers; as long as your router administration panel allows the necessary changes you can follow right along with us. A quick note on the difference between the basic and advanced versions of this tutorial before we proceed. Your typical Wi-Fi router has 5 Ethernet ports on the back: 1 labeled “Internet”, “WAN”, or a variation thereof and intended to be connected to your DSL/Cable modem, and 4 labeled 1-4 intended to connect Ethernet devices like computers, printers, and game consoles directly to the Wi-Fi router. When you convert a Wi-Fi router to a switch, in most situations, you’ll lose two port as the “Internet” port cannot be used as a normal switch port and one of the switch ports becomes the input port for the Ethernet cable linking the switch to the main network. This means, referencing the diagram above, you’d lose the WAN port and LAN port 1, but retain LAN ports 2, 3, and 4 for use. If you only need to switch for 2-3 devices this may be satisfactory. However, for those of you that would prefer a more traditional switch setup where there is a dedicated WAN port and the rest of the ports are accessible, you’ll need to flash a third-party router firmware like the powerful DD-WRT onto your device. Doing so opens up the router to a greater degree of modification and allows you to assign the previously reserved WAN port to the switch, thus opening up LAN ports 1-4. Even if you don’t intend to use that extra port, DD-WRT offers you so many more options that it’s worth the extra few steps. Preparing Your Router for Life as a Switch Before we jump right in to shutting down the Wi-Fi functionality and repurposing your device as a network switch, there are a few important prep steps to attend to. First, you want to reset the router (if you just flashed a new firmware to your router, skip this step). Following the reset procedures for your particular router or go with what is known as the “Peacock Method” wherein you hold down the reset button for thirty seconds, unplug the router and wait (while still holding the reset button) for thirty seconds, and then plug it in while, again, continuing to hold down the rest button. Over the life of a router there are a variety of changes made, big and small, so it’s best to wipe them all back to the factory default before repurposing the router as a switch. Second, after resetting, we need to change the IP address of the device on the local network to an address which does not directly conflict with the new router. The typical default IP address for a home router is 192.168.1.1; if you ever need to get back into the administration panel of the router-turned-switch to check on things or make changes it will be a real hassle if the IP address of the device conflicts with the new home router. The simplest way to deal with this is to assign an address close to the actual router address but outside the range of addresses that your router will assign via the DHCP client; a good pick then is 192.168.1.2. Once the router is reset (or re-flashed) and has been assigned a new IP address, it’s time to configure it as a switch. Basic Router to Switch Configuration If you don’t want to (or need to) flash new firmware onto your device to open up that extra port, this is the section of the tutorial for you: we’ll cover how to take a stock router, our previously mentioned WRT54 series Linksys, and convert it to a switch. Hook the Wi-Fi router up to the network via one of the LAN ports (consider the WAN port as good as dead from this point forward, unless you start using the router in its traditional function again or later flash a more advanced firmware to the device, the port is officially retired at this point). Open the administration control panel via  web browser on a connected computer. Before we get started two things: first,  anything we don’t explicitly instruct you to change should be left in the default factory-reset setting as you find it, and two, change the settings in the order we list them as some settings can’t be changed after certain features are disabled. To start, let’s navigate to Setup ->Basic Setup. Here you need to change the following things: Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable Save with the “Save Settings” button and then navigate to Setup -> Advanced Routing: Operating Mode: Router This particular setting is very counterintuitive. The “Operating Mode” toggle tells the device whether or not it should enable the Network Address Translation (NAT)  feature. Because we’re turning a smart piece of networking hardware into a relatively dumb one, we don’t need this feature so we switch from Gateway mode (NAT on) to Router mode (NAT off). Our next stop is Wireless -> Basic Wireless Settings: Wireless SSID Broadcast: Disable Wireless Network Mode: Disabled After disabling the wireless we’re going to, again, do something counterintuitive. Navigate to Wireless -> Wireless Security and set the following parameters: Security Mode: WPA2 Personal WPA Algorithms: TKIP+AES WPA Shared Key: [select some random string of letters, numbers, and symbols like JF#d$di!Hdgio890] Now you may be asking yourself, why on Earth are we setting a rather secure Wi-Fi configuration on a Wi-Fi router we’re not going to use as a Wi-Fi node? On the off chance that something strange happens after, say, a power outage when your router-turned-switch cycles on and off a bunch of times and the Wi-Fi functionality is activated we don’t want to be running the Wi-Fi node wide open and granting unfettered access to your network. While the chances of this are next-to-nonexistent, it takes only a few seconds to apply the security measure so there’s little reason not to. Save your changes and navigate to Security ->Firewall. Uncheck everything but Filter Multicast Firewall Protect: Disable At this point you can save your changes again, review the changes you’ve made to ensure they all stuck, and then deploy your “new” switch wherever it is needed. Advanced Router to Switch Configuration For the advanced configuration, you’ll need a copy of DD-WRT installed on your router. Although doing so is an extra few steps, it gives you a lot more control over the process and liberates an extra port on the device. Hook the Wi-Fi router up to the network via one of the LAN ports (later you can switch the cable to the WAN port). Open the administration control panel via web browser on the connected computer. Navigate to the Setup -> Basic Setup tab to get started. In the Basic Setup tab, ensure the following settings are adjusted. The setting changes are not optional and are required to turn the Wi-Fi router into a switch. WAN Connection Type: Disabled Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable In addition to disabling the DHCP server, also uncheck all the DNSMasq boxes as the bottom of the DHCP sub-menu. If you want to activate the extra port (and why wouldn’t you), in the WAN port section: Assign WAN Port to Switch [X] At this point the router has become a switch and you have access to the WAN port so the LAN ports are all free. Since we’re already in the control panel, however, we might as well flip a few optional toggles that further lock down the switch and prevent something odd from happening. The optional settings are arranged via the menu you find them in. Remember to save your settings with the save button before moving onto a new tab. While still in the Setup -> Basic Setup menu, change the following: Gateway/Local DNS : [IP address of primary router, e.g. 192.168.1.1] NTP Client : Disable The next step is to turn off the radio completely (which not only kills the Wi-Fi but actually powers the physical radio chip off). Navigate to Wireless -> Advanced Settings -> Radio Time Restrictions: Radio Scheduling: Enable Select “Always Off” There’s no need to create a potential security problem by leaving the Wi-Fi radio on, the above toggle turns it completely off. Under Services -> Services: DNSMasq : Disable ttraff Daemon : Disable Under the Security -> Firewall tab, uncheck every box except “Filter Multicast”, as seen in the screenshot above, and then disable SPI Firewall. Once you’re done here save and move on to the Administration tab. Under Administration -> Management:  Info Site Password Protection : Enable Info Site MAC Masking : Disable CRON : Disable 802.1x : Disable Routing : Disable After this final round of tweaks, save and then apply your settings. Your router has now been, strategically, dumbed down enough to plod along as a very dependable little switch. Time to stuff it behind your desk or entertainment center and streamline your cabling.     

  Read the article

• CodePlex Daily Summary for Saturday, May 01, 2010

  CodePlex Daily Summary for Saturday, May 01, 2010New ProjectsAjaxControlToolkit additional extenders: AjaxControlToolkit based additionals extenders. Now it contains BreadCrumbsExtender and UpdatePanelExtender for long opertions using Comet. It's d...Data Ductus Malmö Utilities: This is a collection of various utilities used / may be used by Data Ductus Malmö. Utilities ranges from postsharp aspects, WCF utils both inhouse ...DestinationPDF a PDF exporter that works from the browser: Generate a PDF document from your webpage, selecting the HTML portions you want to add. DynamicJson: dynamic json structure for C# 4.0. Event-Based Components Tooling: Event-Based Components (EBC) bring software development on par with mechanical engineering and electrical engineering in that they describe how sof...Find diff of two text or xml files. Transform from one to another.: An algorithm to diff two strings or XElements. Not only get the diff, but also get how to transform one string to another. Two methods are provid...Fireworks: Fireworks is an extensible application framework designed to create custom tools for managing XML (XSD only) documents. Fireworks is especially us...General Ontology & Text Engineering Architecture for .NET: GOTA is an OpenSource online & collaborative text engineering development environment for .NET. GOTA aims to simplify and parallelize the developme...IsWiX: IsWiX is a Windows Installer XML ( WiX ) document editor based on the Fireworks Application Framework. Is WiX enables non-setup developers to colla...kp.net: Managed ADO.Net provider for kdb+ database.LinqToTextures: A node-based editor for creating procedural textures and HLSL shaders. Developed in C#. Can export PNG images, .fx files for HLSL, or XML that can ...MTG Match Counter: MTG Match Counter is a simple life\match counter, designed for Magic: The Gathering players.MVP Passive View Control Model Framework: Framework that builds on the power of my view on the Passive View pattern which I call the Passive Ciew Control Model. This framework is my impleme...My Notepad: Get an all-tabbed, free floating type of a notepad - a perfect replacement for the current notepad for a normal computer user. You no longer have t...NerdDinnerAddons: Add-ons for ASP.NET MVC NerdDinner ApplicationrITIko: Questo progetto è stato creato come esperimento dalla classe 4G dell'ITIS B. Pascal di Cesena. Serve (per ora) solo per testate il funzionamento d...Semester Manager: CVUT Semester ManagerSharePoint 2010 PowerShell Scripts & Utilities: A collection of PowerShell modules / scirpts for managing SharePoint 2010 deployments and product releated featuresSmartBot: Irc client for searching information.StackOverflow Desktop Client in C# and WPF: StackOverflow client written in WPF and C# that can notify you of new posts for tags that you've marked interesting on the actual website. Works...TimeSaver - virtual worlds at the service of e-Gov: TimeSaver aims at the construction of tools to build specialized virtual worlds for the provision of services for e-Gov. TimeSaver has received fin...TinyProject: This is a tiny project developing code.Turtle Logo (programming language) for Kids: Turtle Logo for Kids teaches kids step by step the basic of computers programmong. LOGO is a computer programming language used for functional prog...UITH- Hospital Manaegment: A simple hospital or clinic management softwareUniHelper: UniHelper is a tool to help simplify .NET development with UniData/UniVerse database servers.Value Injecter: useful for filling/reading forms (asp.net-mvc views, webforms, winforms, any object) with data from another (or more) object(s) and after you can g...Vortex2D.NET Game Engine: Easy to use 2D game engine for Windows based on .NET and Direct3D9Yame Sample Project: 这个是学习项目，可能用内容：ExtJs，VS2010，Enterprise Library 5，Unity 2New ReleasesAll-In-One Code Framework: All-In-One Code Framework 2010-04-30: Improved and Newly Added Examples:For an up-to-date list, please refer to All-In-One Code Framework Sample Catalog. Samples for ASP.NET Name D...C#Mail: Higuchi.Mail.dll (2010.4.30 ver): Higuchi.Mail.dll at 2010-3-30 version.CycleMania Starter Kit EAP - ASP.NET 4 Problem - Design - Solution: Cyclemania 0.08.66: see Source Code tab for recent change historyDestinationPDF a PDF exporter that works from the browser: Initial release: DestinationPDF library DestinationPDF javascript helper functions Sample htmlDotNetNuke 5 Thai Language Pack: Resource Pack Core: Bata Released for DNN Core & Module Thai LanuageDotNetNuke Skins Pack: DNN 80 Skins Pack.: This released is the first for DNN 4 & 5 with Skin Token Design (legacy skin support on DNN 4 & 5)DynamicJson: Release 1.0.0.0: 1st ReleaseFamAccountor: 家庭账薄 预览版v0.0.3: 家庭账薄 预览版v0.0.3 该版本提供基本功能，还有待扩展! Feature: 完成【系统管理】下【注销用户】、【重新记账】功能。 添加导出EXCEL功能。Feed Viewer: 3.7.0.0: new tray icon better fitting with Windows 7 and Vista tray icons style bugfixesFind diff of two text or xml files. Transform from one to another.: Beta1 Release Source Code and Sample App: This is the first release. The source code compiled on VS2010 DotNET4.0. The Sample App EXE and DLL require DotNET4.0 I did not use any new featu...Fireworks: Fireworks 1.0.264.0: Build 1.0.264.0 - Internal TFS Changeset 815 Fireworks.msi - Integrated Fireworks Application example packaged with Windows Installer. FireworksM...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.0.9 beta Released: Hi, This release contains the following enhancements: 1) Multilevel property path in DataBinding- Now onwards you will be able to work with multi...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.5.2 beta Released: Hi, This release contains the following enhancements: 1) Multilevel property path in DataBinding- Now onwards you will be able to work with multi...General Ontology & Text Engineering Architecture for .NET: GOTA Server Types: This document shows current GOTA Server TypesHammock for REST: Hammock v1.0.2: v1.0.2 Changes.NET 4.0 and Client Profile security model fix Fixes for OAuth access tokens and verifiers Silverlight proxy values are now surfa...Industrial Dashboard: ID 3.0: Added Example with IndustrialGrid. Added Example with SidebarAccordionMenu.IsWiX: IsWiX 1.0.258.0: Build 1.0.258.0 built against Fireworks 1.0.264.0JpAccountingBeta: JpBeta: This is A testNerdDinnerAddons: NerdDinnerAddons: Add-ons for ASP.NET MVC NerdDinner Applicationopen gaze and mouse analyzer: Ogama 3.2: This release was published on 30.04.2010 and is mainly a bugfix release on improving the interface to the ITU GazeTracker. For the list of changes ...Perspective - Easy 2D and 3D programming with WPF: Perspective 2.0 beta: A .NET 4.0 version of Perspective with many improvements : New panels (see also Silverlight version) : BeePanel : a honeycomb layout wrap panel. ...Protoforma | Tactica Adversa: Skilful 0.3.5.562 RC2: RC2 MD5 checksum: 95703dcd6085f0872e9b34c2e1a8337d SHA-1 checksum: 8e63f6fe7e3a01e7e47bc2cbf20210725ddd11cfRule 18 - Love your clipboard: Rule 18 - version 1.2: This is the forth public release for Rule 18 and includes a bunch of bug fixes and tweaks to the tool. The tool has extensive usage in the field an...Sharp DOM: Sharp DOM 1.0: This is the first release of Sharp DOM project. It includes the major features needed for stronly typed HTML code development, including support fo...sMAPedit: sMAPedit v0.7: Added: segment visualization Added: remove & create paths, points, segments Added: saving file function Added: editing of fields in points an...sTASKedit: sTASKedit v0.7b (Alpha): Fixed: leave focus when saving to avoid missing change of last edited field Fixed: when changing task id, all cryptkeys are changed and all texts...TidyTinyPics: TidyTinyPics 0.13: We can avoid to have the renaming done automatically.TimeSaver - virtual worlds at the service of e-Gov: JamSession4TimeSaver: JamSession v0.9 - this is the first draft source code for the JamSession orchestration language, which shall be used in TimeSaver. Future versions...Tribe.Cache: Tribe.Cache 1.0: Release 1.0Turtle Logo (programming language) for Kids: Logo: Source code in C# on Silverlight using Visual Studio 2010UITH- Hospital Manaegment: UITH-Hospital: A simple hospital management system. to use the program you need to install sql express server 2005 .net framework 3.5VCC: Latest build, v2.1.30430.0: Automatic drop of latest buildVisual Studio 2010 AutoScroller Extension: AutoScroller v0.2: A Visual studio 2010 auto-scroller extension. Simply hold down your middle mouse button and drag the mouse in the direction you wish to scroll, fu...Most Popular ProjectsRawrWBFS ManagerAJAX Control Toolkitpatterns & practices – Enterprise LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)iTuner - The iTunes CompanionASP.NETDotNetNuke® Community EditionMost Active Projectspatterns & practices – Enterprise LibraryRawrIonics Isapi Rewrite FilterHydroServer - CUAHSI Hydrologic Information System Serverpatterns & practices: Azure Security GuidanceGMap.NET - Great Maps for Windows Forms & PresentationTinyProjectSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data SourcesFarseer Physics EngineNB_Store - Free DotNetNuke Ecommerce Catalog Module

  Read the article

• CodePlex Daily Summary for Friday, July 19, 2013

  CodePlex Daily Summary for Friday, July 19, 2013Popular ReleasesuComponents: uComponents v5.5.0: Following on from our 101355 release, we bring you... v5.5.0! Resolved issues The following issues have been resolved in 5.5.0: 14634 14848 DataType Grid 14840 14842 14845 UpgradingThe best way to upgrade uComponents is to re-install via Umbraco's back-office package installer, (either from the package repository or a local package upload). Do not uninstall an existing uComponents package, as this may lead to data loss! Umbraco compatibilityThis release is compatible with Umbraco 4...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.Scryber PDF Generation: Scryber.Installer.v0.8.3: This one has tables! A significant update to the scryber library, with the inclusion of tables. There is no column span, or row span, and nested tables are not fully supported. But - they overflow nicely and are well styled. And they can be data bound. Other updates The Link element has inner components directly as a child, rather than in a Content element. The existing files will still continue to work, but are invalid wrt the schema. Databinding is now supported at the document level, r...Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...GoAgent GUI: GoAgent GUI 1.2.0 ???: *???????，??????????????，?????????????? ????????* ????????(Beta) Beta????：https://goagent.codeplex.com/workitem/list/basic ??????：uygw@outlook.com ????：https://goagent.codeplex.com/documentation ?????????????????。Circuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesAscend 3D: Ascend (2013-07-17): Ascend 2.1 Animation bugfixes and speed/robustness improvements Added compatibility for multiple top-level bones on armatures Ascend Blender Exporter 2.1 Removed need to create parent-child relationship between armature and skinning mesh Added support for exporting multiple top-level bones on armatures AscendViewer 1.0.4 Updated to use latest version of Ascend libraryCommunity TFS Build Extensions: July 2013: The July 2013 release contains VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 The Community TFS Build Manager can also be found in the Visual Studio Gallery here where updates will first become available. A version supporting VS2010 is also available in the Gallery here.smoketestgit1: new release: Wiki Markup Guide bold italics underline Heading 1 Heading 2 Bullet List Bullet List 2 Number List Number List 2 http://www.example.com Do not apply formattingsmoketesthg: new release: Wiki Markup Guide bold italics underline Heading 1 Heading 2 Bullet List Bullet List 2 Number List Number List 2 http://www.example.com Do not apply formattingsmoketesttfs: new release: Wiki Markup Guide bold italics underline Heading 1 Heading 2 Bullet List Bullet List 2 Number List Number List 2 http://www.example.com Do not apply formattingdatajs - JavaScript Library for data-centric web applications: datajs version 1.1.1: datajs is a cross-browser and UI agnostic JavaScript library that enables data-centric web applications with the following features: OData client that enables CRUD operations including batching and metadata support using both ATOM and JSON payloads. Single store abstraction that provides a common API on top of HTML5 local storage technologies. Data cache component that allows reading data ranges from a collection and storing them locally to reduce the number of network requests. Changes ...Orchard Project: Orchard 1.7 RC: Planning releasedTerminals: Version 3.1 - Release: Changes since version 3.0:15992 Unified usage of icons in user interface Added context menu in Organize favorites grid Fixed:34219 34210 34223 33981 34209 Install notes:No changes in database (use database from release 3.0) No upgrade of configuration, passwords, credentials or favorites See also upgrade notes for release 3.0Media Companion: Media Companion MC3.573b: XBMC Link - Let MC update your XBMC Library Fixes in place, Enjoy the XBMC Link function Well, Phil's been busy in the background, and come up with a Great new feature for Media Companion. Currently only implemented for movies. Once we're happy that's working with no issues, we'll extend the functionality to include TV shows. All the help for this is build into the application. Go to General Preferences - XBMC Link for details. Help us make it better* Currently only tested on local and ...Wsus Package Publisher: Release v1.2.1307.15: Fix a bug where WPP crash if 'ShowPendingUpdates' is start with wrong credentials. Fix a bug where WPP crash if ArrivalDateAfter and ArrivalDateBefore is equal in the ComputerView. Add a filter in the ComputerView. (Thanks to NorbertFe for this feature request) Add an option, when right-clicking on a computer, you can ask for display the current logon user of the remote computer. Add an option in settings to choose if WPP ping remote computers using IPv4, IPv6 or IPv6 and, if fail, IP...Lab Of Things: vBeta1: Initial release of LoTVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...New Projects[C#]A Complete MySQL Manager Project: An open-source MySQL database manager oriented to multi-threading environments, supporting to create an entire database from scratch and edit it.bCal Javascript Calendar Generator: Using this simple javascript library, you can create simple navigable calendars in your website with just one line of user code.Better Network: Tools to delete network profile and network lists in Windows 8.C# Intellisense for Notepad++: 'CS-Script Intellisense' is a real C# intellisense solution based on CS-Script and ICSharpCode.NRefactory/Mono.Cecil.DARF: Dynamic Application Runtime Framework: A set of tools and libraries which help software developers create fully distributed and component-based applications. FeiXinV5: Just TestFollower Catcher: Game made for the 2012 Windows 8 Megathon. Second place in Madrid's local competition.MeeOS .NET: El primer sistema operativo GNU GPL en español.Music Vault: Music Vault is program to store your favorite music in one place, you can in any time move all your music library by moving only one file.MVC uTorrent: This is an ASP.NET MVC uTorrent front end, that utilises the uTorrent API. The main features: - Single page application - Can be hosted in IISMyTaskManager: This project Related to distribute the task to log in users OO2RDF: OO2RDF is a framework for data triplification. P(y)rotein Subcellular Location Image Database: A library that allows communication with an OMERO database, an open-source software for storage and manipulation of biological images.PE Toolbox: PE Toolbox ? ????? ?? ???????????, ????? ??????? ??? ??????????? ?? ?????. ???? ????? ??????????? ???????: - PE IFE (Importing from Excel) PeGscan: *PeGscan*ScriptZilla: ScriptZilla is an Free Editor for Windows with more Than 23 Languages.Sharepoint : Reconciliate SSRS Reports and Datasets with datasources Powershell: Powershell to link datasources to SSRS reports and datasetsSync-Moped: The idea behind the "Sync-Moped" is to synchronize two directories with backup functionality.System.Time: System.Time provides a type for .NET that allows the managing of a time in System.String, System.DateTime and System.TimeSpan form at the same time.Text Analytics: Project summary will be added later.Tibia Universal MC .NET: This tool was written as an attempt to port the [url:http://code.google.com/p/xenomc/] to the .NET Framework.VRFramework: VR Framework is a system for creating a virtual reality games using your PC, and Android smart phone, and Unity 3D.

  Read the article

• CodePlex Daily Summary for Monday, April 05, 2010

  CodePlex Daily Summary for Monday, April 05, 2010New Projects.Net Data Form Wizard: A Basic .Net application that will connect to a SQL Server, allow you to select a database, then select from the user created tables, read the tabl...Agilisa Data.Controls: Agilisa DataControls provides ready to use Databound controls, encapsulating the data connection logic, caching, for ASP.NET Controls. Just drop th...algoritmia: A Python 3.1+ library of Data Structures and Algorithms. This library is being used to teach a course on Algorithms in my university. It contains ...Bag of Tricks: The original WPF Bag of tricks, now maintained by your friends at Pixel Lab.DIMIS: It is a simple asp.net system, just for practice!DotNetNuke® Postgres Data Provider: DNN PG Provider is a DotNetNuke® 4.9.2 Data Provider for PostgreSQL, an enterprise class open source database system. With DNN PG DataProvider y...Home Finance: This project develop to manage your home finance.House Repair Management System: House Repair Management SystemLaunchpadNET: LaunchpadNET is a C# library for interfacing your .NET program with the Novation Launchpad controller.Mapsui - UI for maps: Mapsui is a UI library for mapping applications. It is based on BruTile and SharpMap. It is designed to be fast and responsive.micronovo: micronovomicronovomicronovomicronovoNPlurk: The project goal is to provide a .NET implemented Plurk API wrapper. PowerExt: PowerExt is a Windows Explorer add-in written in C++. Primarily targeted at programmers, it adds an additional .NET tab to the File Properties dial...Python Multiple Dispatch: Multiple dispatch (AKA multimethods) for Python 3 via a metaclass and type annotations.SpugDisposeCheck - Visual Studio Addin for validating Sharepoint dispose objects: AddIn that wraps the SPDisposeCheck Tool from Microsoft and fully integrate it with Visual Studio.System.Tuples: System.Tuples is a small tuple library. It uses T4 to generate tuples, and is made to be compatible with .net 2.0, .net 3.0 and .net 3.5.WebStatistics Server for Windows Server: WebStatistics Server for Windows Server is a tool to create visitor and traffic statistics of a Windows Server running IIS Webserver. It includes a...whileActivity Test: This is a temporary project to test the whileActivity and the updateResourceActivity (Forefront Identity Manager 2010 rtm)XBMC NFO Exporter: XBMC Nfo Exporter is a simple utility that allows you to create reports based on your media XMBC NFO files.XML Flattener: A simple tool to flatten "pretty"-printed XML files into a single line for use in web service test situations, etc. xvanneste: Sources et exemples utilisés sur le site http://www.xvanneste.com et http://media.xvanneste.comzhengym: 这是我个人的测试项目New Releases.Net Data Form Wizard: Alpha: I am only providing the logical code at this point. I will release a completed project once it has basic functionality, at the moment it only gener....Net Data Form Wizard: Alpha Code: This is only the basic VB code to create a form from the database information.Alter gear SQL index Management: Setup 1.1.1: Changes : Added ability to save / delete connection stringsExcelDna: ExcelDna Version 0.24: This versions adds packing support for .config files, and fixes a bug where temp files were not cleaned up.Hash Calculator: HashCalculator 1.1: Added drag-and-drop support Fixed some bugsHeadCounter: HeadCounter 1.2.4 'Vaelastrasz': Added a basic bbcode option for forum posting to sites that do not support full bbcode implementations (e.g. Guild Portal)Home Access Plus+: v3.2.5.0: v3.2.5.0 Release Change Log: Added the booking system File Changes: ~/app_data/* ~/bin/CHS.dll ~/bin/CHS.pdb ~/bin/CHS Extranet.dll ~/bin/...Home Access Plus+: v3.2.5.1: v3.2.5.1 Release Change Log: Fixed access to the booking system for non domain admin File Changes: ~/bin/CHS Extranet.dll ~/bin/CHS Extranet.pdb...Howard van Rooijen's Code Samples: Getting Started with MongoDB and NoRM: Code to accompany the blog post A .NET Developer Guide to: MongoDB and NoRM This download contains the a solution with the following structure: G...iExporter - iTunes playlist exporting: iExporter gui v2.5.1.0 - console v1.2.1.0: Paypal donate! Fixed small bug for iExporter Gui When pressing the Select button more then once, the Deselect button would not disable the Export...IST435: Lab 2 Demo Solution: Lab 2 Demo Solution - OverviewThis is a demo solution for Lab 2 which meets the basic requirements of the lab. Note that this solution has the foll...JSINQ - LINQ to Objects for JavaScript: JSINQ 1.0.0.1: Minor bugfixes with the Enumerable and Dictionary implementations.Mavention: Mavention Instant Page Create: Mavention Instant Page Create allows you to create new Publishing Pages with a single mouse click. Screenshots and more information available @ htt...Microsoft Dynamics CRM 4.0 Marketing List Member Importer: Nocelab ExcelAddin - Release 2.2: Version: 2.2 Release Note: - Added tab in the task panel - Added test button to check MSCRM connection How to install: - Uninstall previous ve...Multiplayer Quiz: Release 1_6_903_0b: Latest beta release - please leave any bugs etc in comments.MVVM Light Toolkit: MVVM Light Toolkit V3 SP1: This release can be installed on top of V3, and adds the following features: Project and Item templates for Visual Studio 10 Express (phone editio...NPlurk: First release: This is first release of NPlurk and it's almost completely workable. Enjoy!Performance Analysis of Logs (PAL) Tool: PAL v2.0 Alpha 5: Export to Perfmon Log Template or Data Collector Set Added: Added the feature to export perfmon log templates (*.htm) for WinXP/2003 computers or D...Python Multiple Dispatch: v0.1: Initial release. I believe it is working fine.ReRemind: V7: - Added new notification: "Unread MMS" <- Default is enabled, so be sure to go into Config if you don't want this. - Config now supports sound and ...SharePhone: SharePhone v.1.0.2: Added support for retrieving user profiles and saving back to SharePoint Use clientContext.GetUserProfile(..) or clientContext.UpdateUserProfile(..)Shinkansen: compress, crunch, combine, and cache JavaScript and CSS: Shinkansen 1.0.0.033010: Added support for ASP.NET MVC. Download contains binaries only.SpugDisposeCheck - Visual Studio Addin for validating Sharepoint dispose objects: SpugDisposeCheck Beta Release [Stable]: SpugDisposeCheck - Visual Studio Addin for validating Sharepoint dispose objects You can download the Microsoft SPDisposeCheck Tool from here:http...Starter Kit Mytrip.Mvc.Entity: Mytrip.Mvc.Entity 1.0 RC2: EF Membership XML Membership UserManager FileManager Localization Captcha ClientValidation Theme CrossBrowser VS 2010 RC MVC 2 R...System.Tuples: System.Tuples for .net 2.0: The System.Tuples release for .net 3.0System.Tuples: System.Tuples for .net 3.0: The System.Tuples release for .net 3.0 Extension methods have been removed to remain compatible with 3.0System.Tuples: System.Tuples for .net 3.5: The System.Tuples release for .net 3.5 Contains full functionality of the library.WatchersNET.TagCloud: WatchersNET.TagCloud 01.03.00: Whats New Html (non Flash) TagCloud can be skinned 11 Skins added for Html Cloud Skin Orange Skin Purple Import/Export of Custom Tags Sett...whileActivity Test: Activity1.zip: ActivityLibrary1.zip contains the source code to do a testWindows Phone 7 Panorama control: panorama control v0.5: Control source code for v0.5. This is the first drop. Doens't include sample project.Windows Phone 7 Panorama control: panorama control v0.5 + samples: Control source code and sample project. This drop includes 2 samples projects : - PhoneApp - Windows Phone sample - SilverlightApp - Silverlight...XML Flattener: XML Flattener: A simple WinForms app--paste in your XML, hit Flatten, and copy the result.xvanneste: RestFul SharePoint: ListItem.xslt ListItems.xslt Lists.xslt ListItemSPChat.xslt RestFull.htm SPChat.htmZinc Launcher: Zinc Launcher 1.0.1.0: Zinc Launcher requires that Zinc be properly installed. It should work under Vista Media Center and 7 Media Center, although Vista is untested. Zin...Most Popular ProjectsRawrWBFS ManagerMicrosoft SQL Server Product Samples: DatabaseASP.NET Ajax LibrarySilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesDotNetNuke® Community EditionMost Active ProjectsGraffiti CMSnopCommerce. Open Source online shop e-commerce solution.RawrFacebook Developer ToolkitjQuery Library for SharePoint Web ServicesBlogEngine.NETFarseer Physics EngineNcqrs Framework - A CQRS framework for .NETpatterns & practices – Enterprise LibraryN2 CMS

  Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188  | Next Page >