Search Results

Search found 7238 results on 290 pages for 'step'.

Page 184/290 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

• TeamCity run Nunit tests in Parallel

  - by Bob Sinclar

  So I was thinking that there must be a better way to run NUnit tests for a .net project via teamcity. Currently the build of the project takes about 10 minutes , and the testing step takes 30ish minutes. I was thinking about splitting up the Nunit tests into 3 groups, assigning them each to a different agent. And then make sure they have a build dependency on the initial build before they start. This was the best way i thought of doing it, Is there a different way I should also consider? On a side note Is it possible to combine all the Nunit tests at the end to get one report from the tests being build on 3 different machines? I dont think this is possible unless someone thought of a clever hack.

  Read the article

• How can I get a rails server to use the same databse that cucumber uses during a test?

  - by James

  The cucumber test first makes an entry in the database and posts a form to a second server. This second server does some processing in background and then hits the first app (where the test is being run) with some data that the cucumber test needs to know about. I've tried running the main server via script/server and script/server -e test while the cucumber test is running, but I can't seem to force the server to use the same database that cucumber is using when it runs its step definitions. That is, when the second server pushes some data to a controller in the main server, the main server doesn't know about any entries that cucumber has made in the database. How can I get cucumber and the main server to use the same database?

  Read the article

• How to use NetBeans to debug C++ libraries not compiled with NetBeans?

  - by Paul Gotzel

  Hello, I am using NetBeans 6.8 on Redhat Linux. Does anyone know how to configure NetBeans to debug (step into) libraries not compiled with NetBeans? In my particular case, I'm trying to debug the VTK library which is built using cmake with the Debug flag set. I've written a C++ application that uses the shared libraries from VTK. Any ideas? I'd tried the obvious things like adding the source locations to the project. Note that with gdb I can debug the application and set breakpoints anywhere in VTK. Any help would be appreciated. Thanks, Paul

  Read the article

• Restoring Sharepoint content database

  - by jude

  Hi, My WSS_Content database had got corrupt. And my pc was infected by virus. I had no backup of my WSS_Content database. So, I copied the corrupt database to a separete disk, formatted and reinstalled Sharepoint, with SQL Server 2005 as before (I'm using sharepoint 2007 ). I used Sytools Sharepoint Recovery tool, that i found on the net, which helped me restore my corrupt WSS_Content database. Now i want to set this content database as my "The content database" for my newly installed sharepoint. I tried the steps that i found in the link :- http://www.stationcomputing.com/scblogspace/Lists/Posts/Post.aspx?ID=40 I get stuck at step 3. Can anybody help me. I am really in a big mess. Would appreciate any help. Thanks, Jude Aloysius

  Read the article

• How do I get property injection working in Ninject for a ValidationAttribute in MVC?

  - by jaltiere

  I have a validation attribute set up where I need to hit the database to accomplish the validation. I tried setting up property injection the same way I do elsewhere in the project but it's not working. What step am I missing? public class ApplicationIDValidAttribute : ValidationAttribute { [Inject] protected IRepository<MyType> MyRepo; public override bool IsValid(object value) { if (value == null) return true; int id; if (!Int32.TryParse(value.ToString(), out id)) return false; // MyRepo is null here and is never injected var obj= MyRepo.LoadById(id); return (obj!= null); } One other thing to point out, I have the Ninject kernel set up to inject non-public properties, so I don't think that is the problem. I'm using Ninject 2, MVC 2, and the MVC 2 version of Ninject.Web.MVC. Thanks!

  Read the article

• How do I prevent an ASP.NET MVC deployment on IIS 6.0, using wildcard mapping, from attempting to ha

  - by Rob

  As noted by the title, what is the best way to configure an IIS 6.0 deployment of an ASP.NET MVC application such that connections to hidden shares are ignored? The application in question is using wildcard mapping to allow for clean URLs since we are planning on upgrading to IIS 7.0 in the near future and we are also handling the caching and compression issues with a custom library so we would like to avoid turning wildcard mapping off unless absolutely necessary. Below is a one of the errors from the application to give you an example of what we are seeing. -------------------------------------------------------------------------------- System.Web.HttpException -------------------------------------------------------------------------------- Time Stamp - 03 Mar 2010, 08:11:44 Path - N/A, Internal Server Operation Message - The controller for path '/C$' could not be found or it does not implement IController. Target Site - System.Web.Mvc.IController GetControllerInstance(System.Type) Stack Trace - at System.Web.Mvc.DefaultControllerFactory.GetControllerInstance(Type controllerType) at System.Web.Mvc.DefaultControllerFactory.CreateController(RequestContext requestContext, String controllerName) at System.Web.Mvc.MvcHandler.ProcessRequest(HttpContextBase httpContext) at System.Web.Mvc.MvcHandler.ProcessRequest(HttpContext httpContext) at System.Web.Mvc.MvcHandler.System.Web.IHttpHandler.ProcessRequest(HttpContext httpContext) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) --------------------------------------------------------------------------------

  Read the article

• Images saved with D3DXSaveSurfaceToFile will open in Paint, not Photoshop

  - by bsruth

  I'm using D3DXSaveSurfaceToFile to save windowed Direct3D 9 surfaces to PNG, BMP and JPG files. There are no errors returned from the D3DXSaveSurfaceToFile call and all files open fine in Windows Photo Viewer and Paint. But they will not open in a higher end image editing program such as Paint Shop Pro or Photoshop. The error messages from these programs basically say that the file is corrupted. If I open the files in Paint and then save them in the same file format with a different file name, then they'll open fine in the other programs. This leads me to believe that D3DXSaveSurfaceToFile is writing out non-standard versions of these file formats. Is there some way I can get this function to write out files that can be opened in programs like Photoshop without the intermediate step of resaving the files in Paint? Or is there another function I should be using that does a better job of saving a Direct3D surfaces to an image?

  Read the article

• how to debug MySql stored procs without breaking control flow from application

  - by M.Taha Masood

  Is there a way to do the following: I have a MySQL DB , and there are many stored procs written in it as well. I use MySQL client library in C to connect to this DB and amongst other things , call the stored procedures. Is there a way to set breakpoints in the stored procedures such that when the call is made from C program ( using mySql client library ) into the stored proc , then control flow is halted in the C program and we can step into the stored proc called to whatever level of nesting and insspecting variables etc ( like any decent C debugged provides )? Is there ANY way to do the above ? Through some third party tool or the like if not through plain MySql . Help is appreciated. thanks

  Read the article

• How to check value of stored procedure output parameter

  - by Anna T

  I have a stored procedure that: A. inserts some rows into a "table variable" based on some joins B. selects all values from column x from that table into a string with comma separated values C. selects all from the "table variable" If I execute the procedure like this: EXEC CatalogGetFilmDetails2 2,111111; a table is returned as instructed per step C above. How can I execute it so that also the output parameter value is displayed? (see point B above). I need to check if it's calculated properly. And since the second parameter is of output type, meaning it's calculated inside the procedure, why is it mandatory to specify a value for it when executing the procedure? I normally use a random value for it, it anyway doesn't matter/impact the result. On the other hand if I try to execute it without the output parameter, it returns an error) Thank you very much! This is how the procedure starts: CREATE PROCEDURE CatalogGetFilmDetails2 (@FilmID int, @CommaSepString VARCHAR(50) OUTPUT) AS And this is how @CommaSepString is calculated: SELECT @CommaSepString = STUFF((SELECT ', ' + Categ FROM @Filme1 FOR XML PATH('')), 1,1,'')

  Read the article

• Jquery .Filter Function Question

  - by Matias

  Hi Guys, This is kindof a simple question, however, I don´t seem to figure out how to do it: I´ve got a slider filtering some stuff $("#price").slider( { range: true, step: 5, change: function(e,ui) { $('total').filter(function(index) { return ( ($("#price").slider("values", 0)) <= $(this).text() <= ($("#price").slider("values", 1))); }).parents('div.item').hide(); } }); Basically, I want an array with index of each of elements which have been filtered so I can reuse them for other purpose. I was thinking of editing filter function to something like: $('total').filter(function(index) { var matches = ( ($("#price").slider("values", 0)) <= $(this).text() <= ($("#price").slider("values", 1))); return matches; }.myFunction(matches){ //do some stuff here with matched elements } This is not correct, your help is greatly appreciated.

  Read the article

• C++ threaded class design from non-threaded class

  - by macs

  I'm working on a library doing audio encoding/decoding. The encoder shall be able to use multiple cores (i.e. multiple threads, using boost library), if available. What i have right now is a class that performs all encoding-relevant operations. The next step i want to take is to make that class threaded. So i'm wondering how to do this. I thought about writing a thread-class, creating n threads for n cores and then calling the encoder with the appropriate arguments. But maybe this is an overkill and there is no need for another class, so i'm going to make use of the "user interface" for thread-creation. I hope there are any suggestions.

  Read the article

• Handling missing/incomplete data in R

  - by doug

  As you would expect from a DSL aimed at data analysts, R handles missing/incomplete data very well, for instance: Many R functions have an 'na.rm' flag that you can set to 'T' to remove the NAs, but if you want to deal with this before the function call, then: to replace each 'NA' w/ 0: ifelse(is.na(vx), 0, vx) to remove each 'NA': vx = vx[!is.na(a)] to remove entire each row that contains 'NA' from a data frame: dfx = dfx[complete.cases(dfx),] All of these functions remove 'NA' or rows with an 'NA' in them. Sometimes this isn't quite what you want though--making an 'NA'-excised copy of the data frame might be necessary for the next step in the workflow but in subsequent steps you often want those rows back (e.g., to calculate a column-wise statistic for a column that has missing rows caused by a prior call to 'complete cases' yet that column has no 'NA' values in it). to be as clear as possible about what i'm looking for: python/numpy has a class, 'masked array', with a 'mask' method, which lets you conceal--but not remove--NAs during a function call. Is there an analogous function in R?

  Read the article

• Stepping thru a plist to get at info

  - by cannyboy

  If I've got a plist set up like this Key Type Value Root Array Item 0 Dictionary -Title String Part One -Description String Welcome to part one. Have fun Item 1 Dictionary -Title String Part Two -Description String Welcome to part two. Fun too. Item 2 Dictionary -Title String Part Three -Description String Welcome to part three. It's free Item 3 Dictionary -Title String Part Four -Description String It's part four. No more How would I step thru to put all the titles in one array, and all the descriptions into another?

  Read the article

• Double Buffering with awt

  - by DDP

  Is double buffering (in java) possible with awt? Currently, I'm aware that swing should not be used with awt, so I can't use BufferStrategy and whatnot. If double buffering is possible with awt, do I have to write the buffer by hand? Unlike swing, awt doesn't seem to have the same built-in double buffering capability. If I do have to write the code by hand, is there a good tutorial to look at? Or is it just easier/advisable for a novice programmer to use swing instead? Sorry about the multi-step question. Thanks for your time :)

  Read the article

• Bulk get of child entities on Google app engine?

  - by dfrankow

  On Google App Engine in Python, I have a Visit entity that has a parent of Patient. A Patient may have multiple visits. I need to set the most_recent_visit (and some auxiliary visit data) somewhere for later querying, probably in another child entity that Brett Slatkin might call a "relationship index entity." I wish to do so in a bulk style as follows: 1. get 100 Patient keys 2. get all Visits that have any of the Patients from 1 as an ancestor 3. go through the Visits and get the latest for each Patient Is there any way to perform step 2 in a bulk get? I know there is a way to bulk get entities from a list of keys, and there is a way to match a single entity by its ancestor.

  Read the article

• Arrays of different types

  - by Tyler

  Hi - Is it possible to have an array that contains two different types of data? I want to have an array that contains a double and also a string. I attempted: ArrayList<double><String> array; But that didn't work. Sorry for the silly question, but it has been a while since I have used something like this.. Can you refresh my memory on how would I declare and populate such an array? And then to take it a step further, I would like to sort the array by the double if possible? Thanks!

  Read the article

• How to launch a web server and point the browser to it when it finishes?

  - by Wing C. Chen

  I am writing a windows batch file to do the following things: Display a picture in the middle of the screen, showing the beautiful icon of my software. Kick of the launch of the web server. Finish displaying the picture. Point the browser to the start page. I have already know how to do it in step 2 and 4. However, I have the following questions in writing the windows batch file: 1. How do I know that the launch of the web server is finished, taking jetty as the example? 2. How do I display a picture and stop displaying it when I want to? Here is what I have got so far: ::here I would like to display the picture start javaw -jar start.jar ::Starting jetty here ::here I would like to stop displaying the picture start http://localhost:8080/myApp ::Pointing the browser to the page Thank you in advance for your help.

  Read the article

• lua string printing

  - by anon

  In C, I have format strings, something like: char *msg = "wlll you marry me" fprintf(stderr, "%s, %s?", name, msg); Now, can I do something similar in lua with format strings? I.e. I want something functionally equivalent to: name .. ", " .. msg .. "?" but not so ugly, in lua. Okay, so I can do string.format("%s, %s?", name, msg), but can I go even a step further, something like perl style, where I can go: "%name, %msg?" Thanks!

  Read the article

• I've created a database table using Visual Studio for my C# program. Now what?

  - by Kevin

  Hi! I'm very new to C#, so please forgive me if I've overlooked something here. I've created a database using Visual Studio (add new item service-based database) called LoadForecast.mdf. I then created a table called ForecastsDB and added some fields. My main question is this: I've created a console application with the intention of writing some data to the newly created database. I've added LoadForecast.mdf as a data source for my program, but is there anything else I should do? I saw an example where the next step was adding a "data diagram", but this was for a visual application, not a console application. Do I still need to diagram the database for my console app? I just want to be able to write new records out to my database table and wasn't sure if there were any other things I needed to do for the VS environment to be "aware" of my database. Thanks for any advise!

  Read the article

• Problem with Eclipse and a Maven multi-module project

  - by earth

  I have created a Maven project with the following structure: + root-project pom.xml (pom) + sub-projectA (jar) + sub-projectB (jar) I have done the following steps: mvn archetype:create –DgroupId=my.group.id –DartifactId=root-project mvn archetype:create –DgroupId=my.group.id –DartifactId=sub-projectA mvn archetype:create –DgroupId=my.group.id –DartifactId=sub-projectB So I have, obviously, in the top-level pom.xml the following elements: <modules> <module>sub-projectA</module> <module>sub-projectB</module> </modules> The last step was: mvn eclipse:clean eclipse:eclipse Now if I import the root-project in Eclipse, it seems to look at my projects as resources and not like java projects. However if I import each of child projects sub-projectA and sub-projectB, it looks them like java projects. This is a big problem for me because I have a deeper hierarchy. Any help would be appreciated!

  Read the article

• MySQL import in phpmyadmin (CSV) chokes on quotes

  - by Andrew Swift

  I am trying to import a .csv file into a MySQL table via phpMyAdmin. The .csv file is separated by pipes, formated like this: data|d'ata|d'a"ta|dat"a| data|"da"ta|data|da't'a| dat'a|data|da"ta"|da'ta| The data contains quotes. I have no control over the format in which I recieve the data -- it is generated by a third party. The problem comes when there is a | followed by a double quote. I always get an "invalid field count in CSV input on line N" error. I am uploading the file from the import page, using Latin1, CSV, terminated by |, separated by ". I would like to just change the "enclosed by" character, but I keep getting "Invalid parameter for CSV import: Fields enclosed by". I have tried various characters with no success. How can I tell MySQL to accept this format in phpMyAdmin? Setting up these tables is the first step in writing a program that will use uploaded gzipped .csv files to maintain the catalog of an e-commerce site.

  Read the article

• Returning S_FALSE from a C# COM dll

  - by AntonyW

  I have a method defined in IDL as follows : interface IMyFunc : IDispatch { [id(1), helpstring("method GetNextFunction")] HRESULT GetNextFunction([in,out] long* lPos, [out, retval] BSTR* bstrName); } Using C++ I always implemented this as follows : STDMETHODIMP CMyFunc::GetNextFunction(long *nID, long *lPos, BSTR *bstrName) { if ( function to return ) { // setup return values; return S_OK; } else { // just exit return S_FALSE; } } Now I am implementing this in C# and have used tlbimp on the type library and ended up with : public string GetNextFunction(ref int nID, ref int lPos) I understand that this is because [out, retval] is used as the return type instead of the HRESULT as in C++. Is there a simple way to return the S_OK / S_FALSE values without changing the method definition? The only way I can see is that I have to use ildasm / ilasm to add preservesig so I end up with something like this : public int GetNextFunction(ref int nID, ref int lPos, ref string bstrName) I was wondering if there was some other way without doing the il compilation step.

  Read the article

• How can I debug or set a break statement inside an expression tree?

  - by Abel

  When an external library contains a LINQ provider, and it throws an exception when executing a dynamic expression tree, how can I break when that expression is thrown? For example, I use a third party LINQ2CRM provider, which allows me to call the Max<TSource, TResult>() method of IQueryable, but when it throws an InvalidCastException, I fail to break on the spot when the exception is thrown, making it hard to review the stack-trace because it's already unwinded when the debugger breaks it in my code. I've set "break on throw" for the mentioned exception. My debug settings are: Clarification on where exactly I'd want to break. I do not want to break in side the LINQ Expression, but instead, I want to break when the expression tree is executed, or, put in other words, when the IQueryable extension method Max() calls the override provided by the LINQ provider. The top of the stacktrace looks like this, which is where I would like to break inside (or step through, or whatever): at XrmLinq.QueryProviderBase.Execute[T](Expression expression) at System.Linq.Queryable.Max[TSource,TResult](IQueryable`1 source, Expression`1 selector)

  Read the article

• How to call an event when the user "finally" selects an item in a list?

  - by herzmeister der welten

  When a user clicks once on an item in a Grid or a ListBox, that item is usually selected, hence most UI frameworks have a onSelected event or the like for that. However, how can we generally call the next step when a user "finally" selects an item by e.g. double clicking an entry? You know when some popup might appear in the context of the selected item and the user can do further stuff. Strangely enough, I think I have never seen a word for that in any UI framework. onPicked, onAccepted, onChosen, onFinallySelected, onResult? All kinda awkward or too special. Any other ideas?

  Read the article

• Newbie Question: Read and Process a List of Text Files

  - by johnv

  I'm completely new to .NET and am trying as a first step to write a text processing program. The task is simple: I have a list of 10,000 text files stored in one folder, and I'm trying to read each one, store it as a string variable, then run it through a series of functions, then save the final output to another folder. So far I can only manage to manually input the file path like this (in VB.NET): Dim tRead As System.IO.StreamReader Public Function ReadFile() As String Dim EntireFile As String tRead = File.OpenText("c:\textexample\00001.txt") EntireFile = tRead.ReadToEnd Return EntireFile End Function Public Function Step1() ..... End Function Public Function Step2() ..... End Function .............. I'm wondering, therefore, if there's a way to automate this process. Perhaps for example store all input file path into a text file then read each entry at a time, then save the final output into the save path, again listed in a text file. Any help is greatly appreciated. ReplyQuote

  Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >