include guards - Page 185

Template function overloading with identical signatures, why does this work?

- by user1843978

Minimal program: #include <stdio.h> #include <type_traits> template<typename S, typename T> int foo(typename T::type s) { return 1; } template<typename S, typename T> int foo(S s) { return 2; } int main(int argc, char* argv[]) { int x = 3; printf("%d\n", foo<int, std::enable_if<true, int>>(x)); return 0; } output: 1 Why doesn't this give a compile error? When the template code is generated, wouldn't the functions int foo(typename T::type search) and int foo(S& search) have the same signature? If you change the template function signatures a little bit, it still works (as I would expect given the example above): template<typename S, typename T> void foo(typename T::type s) { printf("a\n"); } template<typename S, typename T> void foo(S s) { printf("b\n"); } Yet this doesn't and yet the only difference is that one has an int signature and the other is defined by the first template parameter. template<typename T> void foo(typename T::type s) { printf("a\n"); } template<typename T> void foo(int s) { printf("b\n"); } I'm using code similar to this for a project I'm working on and I'm afraid that there's a subtly to the language that I'm not understanding that will cause some undefined behavior in certain cases. I should also mention that it does compile on both Clang and in VS11 so I don't think it's just a compiler bug.

Read the article

Comparing C++ input with array values

- by Security_Gate

Hey everyone, Over the last couple months I've still been slowly but surely trudging through C++, and I've run into a snag that I've been meaning to figure out. I've tried asking/reading/searching, but I could never find an appropriate answer. Maybe it is simply because the question is sort of difficult to ask. What I'm trying to do is at the end of my program, have the end sequence compare the input value with values within an Array. Do I have to loop a comparison sequence? Is there an easier way around this? #include <iostream> #include <string> using namespace std; int main () { string YesAnswers[5] = {"Y", "YES", "yes" "y"}; string Name; string YN; do { cout << "Enter your name: "; getline(cin, Name); cout << "Your name is "<< Name; cout <<"\nIs this correct? Y\N: "; cin >> YN; } while(YN == YesAnswers); system("Pause"); return 0; }

Read the article

replacing space with %20

- by Codenotguru

The following program replaces all spaces with %20.the compilation works fine but the program terminates during the runtime.Any help??? #include<iostream> #include<string> using namespace std; void removeSpaces(string url){ int len=url.length(); int i,count=0; while(i<=len){ if(url[i]==' ') count++; i++; } int length2=len+(count*2); string newarr[length2]; for(int j=len-1;j>=0;j--){ if(url[j]==' ') { newarr[length2-1]='0'; newarr[length2-2]='2'; newarr[length2-3]='%'; length2=length2-3; } else { newarr[length2-1]=url[j]; length2=length2-1; } } cout<<"\nThe number of spaces in the url is:"<<count; cout<<"\nThe replaced url is:"<<newarr; } int main(){ string url="http://www.ya h o o.com/"; removeSpaces(url); }

Read the article

SQL SERVER – Introduction to Extended Events – Finding Long Running Queries

- by pinaldave

The job of an SQL Consultant is very interesting as always. The month before, I was busy doing query optimization and performance tuning projects for our clients, and this month, I am busy delivering my performance in Microsoft SQL Server 2005/2008 Query Optimization and & Performance Tuning Course. I recently read white paper about Extended Event by SQL Server MVP Jonathan Kehayias. You can read the white paper here: Using SQL Server 2008 Extended Events. I also read another appealing chapter by Jonathan in the book, SQLAuthority Book Review – Professional SQL Server 2008 Internals and Troubleshooting. After reading these excellent notes by Jonathan, I decided to upgrade my course and include Extended Event as one of the modules. This week, I have delivered Extended Events session two times and attendees really liked the said course. They really think Extended Events is one of the most powerful tools available. Extended Events can do many things. I suggest that you read the white paper I mentioned to learn more about this tool. Instead of writing a long theory, I am going to write a very quick script for Extended Events. This event session captures all the longest running queries ever since the event session was started. One of the many advantages of the Extended Events is that it can be configured very easily and it is a robust method to collect necessary information in terms of troubleshooting. There are many targets where you can store the information, which include XML file target, which I really like. In the following Events, we are writing the details of the event at two locations: 1) Ringer Buffer; and 2) XML file. It is not necessary to write at both places, either of the two will do. -- Extended Event for finding *long running query* IF EXISTS(SELECT * FROM sys.server_event_sessions WHERE name='LongRunningQuery') DROP EVENT SESSION LongRunningQuery ON SERVER GO -- Create Event CREATE EVENT SESSION LongRunningQuery ON SERVER -- Add event to capture event ADD EVENT sqlserver.sql_statement_completed ( -- Add action - event property ACTION (sqlserver.sql_text, sqlserver.tsql_stack) -- Predicate - time 1000 milisecond WHERE sqlserver.sql_statement_completed.duration > 1000 ) -- Add target for capturing the data - XML File ADD TARGET package0.asynchronous_file_target( SET filename='c:\LongRunningQuery.xet', metadatafile='c:\LongRunningQuery.xem'), -- Add target for capturing the data - Ring Bugger ADD TARGET package0.ring_buffer (SET max_memory = 4096) WITH (max_dispatch_latency = 1 seconds) GO -- Enable Event ALTER EVENT SESSION LongRunningQuery ON SERVER STATE=START GO -- Run long query (longer than 1000 ms) SELECT * FROM AdventureWorks.Sales.SalesOrderDetail ORDER BY UnitPriceDiscount DESC GO -- Stop the event ALTER EVENT SESSION LongRunningQuery ON SERVER STATE=STOP GO -- Read the data from Ring Buffer SELECT CAST(dt.target_data AS XML) AS xmlLockData FROM sys.dm_xe_session_targets dt JOIN sys.dm_xe_sessions ds ON ds.Address = dt.event_session_address JOIN sys.server_event_sessions ss ON ds.Name = ss.Name WHERE dt.target_name = 'ring_buffer' AND ds.Name = 'LongRunningQuery' GO -- Read the data from XML File SELECT event_data_XML.value('(event/data[1])[1]','VARCHAR(100)') AS Database_ID, event_data_XML.value('(event/data[2])[1]','INT') AS OBJECT_ID, event_data_XML.value('(event/data[3])[1]','INT') AS object_type, event_data_XML.value('(event/data[4])[1]','INT') AS cpu, event_data_XML.value('(event/data[5])[1]','INT') AS duration, event_data_XML.value('(event/data[6])[1]','INT') AS reads, event_data_XML.value('(event/data[7])[1]','INT') AS writes, event_data_XML.value('(event/action[1])[1]','VARCHAR(512)') AS sql_text, event_data_XML.value('(event/action[2])[1]','VARCHAR(512)') AS tsql_stack, CAST(event_data_XML.value('(event/action[2])[1]','VARCHAR(512)') AS XML).value('(frame/@handle)[1]','VARCHAR(50)') AS handle FROM ( SELECT CAST(event_data AS XML) event_data_XML, * FROM sys.fn_xe_file_target_read_file ('c:\LongRunningQuery*.xet', 'c:\LongRunningQuery*.xem', NULL, NULL)) T GO -- Clean up. Drop the event DROP EVENT SESSION LongRunningQuery ON SERVER GO Just run the above query, afterwards you will find following result set. This result set contains the query that was running over 1000 ms. In our example, I used the XML file, and it does not reset when SQL services or computers restarts (if you are using DMV, it will reset when SQL services restarts). This event session can be very helpful for troubleshooting. Let me know if you want me to write more about Extended Events. I am totally fascinated with this feature, so I’m planning to acquire more knowledge about it so I can determine its other usages. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Training, SQLServer, T SQL, Technology Tagged: SQL Extended Events

Read the article

Windows CE: Using IOCTL_DISK_GET_STORAGEID

- by Bruce Eitman

A customer approached me recently to ask if I had any code that demonstrated how to use STORAGE_IDENTIFICATION, which is the data structure used to get the Storage ID from a disk. I didn’t have anything, which of course sends me off writing code and blogging about it. Simple enough, right? Go read the documentation for STORAGE_IDENTIFICATION which lead me to IOCTL_DISK_GET_STORAGEID. Except that the documentation for IOCTL_DISK_GET_STORAGEID seems to have a problem. The most obvious problem is that it shows how to call CreateFile() to get the handle to use with DeviceIoControl(), but doesn’t show how to call DeviceIoControl(). That is odd, but not really a problem. But, the call to CreateFile() seems to be wrong, or at least it was in my testing. The documentation shows the call to be: hVolume = CreateFile(TEXT("\Storage Card\Vol:"), GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL); I tried that, but my testing with an SD card mounted as Storage Card failed on the call to CreateFile(). I tried several variations of this, but none worked. Then I remembered that some time ago I wrote an article about enumerating the disks (Windows CE: Displaying Disk Information). I pulled up that code and tried again with both the disk device name and the partition volume name. The disk device name worked. The device names are DSKx:, where x is the disk number. I created the following function to output the Manufacturer ID and Serial Number returned from IOCTL_DISK_GET_STORAGEID: #include "windows.h" #include "Diskio.h" BOOL DisplayDiskID( TCHAR *Disk ) { STORAGE_IDENTIFICATION *StoreID = NULL; STORAGE_IDENTIFICATION GetSizeStoreID; DWORD dwSize; HANDLE hVol; TCHAR VolumeName[MAX_PATH]; TCHAR *ManfID; TCHAR *SerialNumber; BOOL RetVal = FALSE; DWORD GLE; // Note that either of the following works //_stprintf(VolumeName, _T("\\%s\\Vol:"), Disk); _stprintf(VolumeName, _T("\\%s"), Disk); hVol = CreateFile( Disk, GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL); if( hVol != INVALID_HANDLE_VALUE ) { if(DeviceIoControl(hVol, IOCTL_DISK_GET_STORAGEID, (LPVOID)NULL, 0, &GetSizeStoreID, sizeof(STORAGE_IDENTIFICATION), &dwSize, NULL) == FALSE) { GLE = GetLastError(); if( GLE == ERROR_INSUFFICIENT_BUFFER ) { StoreID = (STORAGE_IDENTIFICATION *)malloc( GetSizeStoreID.dwSize ); if(DeviceIoControl(hVol, IOCTL_DISK_GET_STORAGEID, (LPVOID)NULL, 0, StoreID, GetSizeStoreID.dwSize, &dwSize, NULL) != FALSE) { RETAILMSG( 1, (TEXT("DisplayDiskID: Flags %X\r\n"), StoreID->dwFlags )); if( !(StoreID->dwFlags & MANUFACTUREID_INVALID) ) { ManfID = (TCHAR *)((DWORD)StoreID + StoreID->dwManufactureIDOffset); RETAILMSG( 1, (TEXT("DisplayDiskID: Manufacture ID %s\r\n"), ManfID )); } if( !(StoreID->dwFlags & SERIALNUM_INVALID) ) { SerialNumber = (TCHAR *)((DWORD)StoreID + StoreID->dwSerialNumOffset); RETAILMSG( 1, (TEXT("DisplayDiskID: Serial Number %s\r\n"), SerialNumber )); } RetVal = TRUE; } else RETAILMSG( 1, (TEXT("DisplayDiskID: DeviceIoControl failed (%d)\r\n"), GLE)); free(StoreID); } else RETAILMSG( 1, (TEXT("No Disk Identifcation available for %s\r\n"), VolumeName )); } else RETAILMSG( 1, (TEXT("DisplayDiskID: DeviceIoControl succeeded (and shouldn't have)\r\n"))); CloseHandle (hVol); } else RETAILMSG( 1, (TEXT("DisplayDiskID: Failed to open volume (%s)\r\n"), VolumeName )); return RetVal; } Further testing showed that both \DSKx: and \DSKx:\Vol: work when calling CreateFile(); Copyright © 2010 – Bruce Eitman All Rights Reserved

Read the article

Enabling OUD Entry Cache for large static groups

- by Sylvain Duloutre

Oracle Unified Directory can take advantage of several caches to improve performances. especially the so-called database cache and the file system cache. In addition to that, it is possible to use an entry cache to cache LDAP entries. By default, the entry cache is not used. In specific deployements involving large static groups, it may worth loading the group entries to the entry cache to speed up group membership and group-based aci evaluation. To do so, run the following commands: First, specify which entries should reside in the entry cache. In the commad below, only entries matching the LDAP filter " (|(objctclass=groupOfNames)(objectclass=groupOfUniqueNames)) " will be stored in the entry cache. dsconfig set-entry-cache-prop \ --cache-name FIFO \ --add include-filter:$\|\(objctclass=groupOfNames$$objectclass=groupOfUniqueNames$\) --port <ADMIN_PORT> \ --bindDN cn=Directory\ Manager \ --bindPassword ****** \ --no-prompt Then enable the entry cache: dsconfig set-entry-cache-prop \ --cache-name FIFO \ --set enabled:true \ --port <ADMIN_PORT> \ --bindDN cn=Directory\ Manager \ --bindPassword ****** \ --no-prompt In addition to that, you can control how much memory the entry cache can use: oud@s96sec1d0-v3:/application/oud : dsconfig -X -n -p <ADMIN PORT> -D "cn=Directory Manager" -w <password> get-entry-cache-prop --cache-name FIFO Property : Value(s) -------------------:----------------------------------------------------------- cache-level : 1 enabled : true exclude-filter : - include-filter : (|(objctclass=groupOfNames)(objectclass=groupOfUniqueNames)) max-entries : 2147483647 max-memory-percent : 90 You can change the max-entries amd max-memory-percent properties to control the entry cache size using the dsconfig set-entry-cache-prop command.

Read the article

SOA Suite 11g Asynchronous Testing with soapUI

- by Greg Mally

Overview The Enterprise Manager test harness that comes bundled with SOA Suite 11g is a great tool for doing smoke tests and some minor load testing. When a more robust testing tool is needed, often times soapUI is leveraged for many reasons ranging from ease of use to cost effective. However, when you want to start doing some more complex testing other than synchronous web services with static content, then the free version of soapUI becomes a bit more challenging. In this blog I will show you how to test asynchronous web services with soapUI free edition. The following assumes that you have a working knowledge of soapUI and will not go into concepts like setting up a project etc. For the basics, please review the documentation for soapUI: http://www.soapui.org/Getting-Started/ Asynchronous Web Service Testing in soapUI When invoking an asynchronous web service, the caller must provide a callback for the response. Since our testing will originate from soapUI, then it is only natural that soapUI would provide the callback mechanism. This mechanism in soapUI is called a MockService. In a nutshell, a soapUI MockService is a simulation of a Web Service (aka, a process listening on a port). We will go through the steps in setting up the MockService for a simple asynchronous BPEL process. After creating your soapUI project based on an asynchronous BPEL process, you will see something like the following: Notice that soapUI created an interface for both the request and the response (i.e., callback). The interface that was created for the callback will be used to create the MockService. Right-click on the callback interface and select the Generate MockService menu item: You will be presented with the Generate MockService dialogue where we will tweak the Path and possibly the port (depends upon what ports are available on the machine where soapUI will be running). We will adjust the Path to include the operation name (append /processResponse in this example) and the port of 8088 is fine: Once the MockService is created, you should have something like the following in soapUI: This window acts as a console/view into the callback process. When the play button is pressed (green triangle in the upper left-hand corner), soapUI will start a process running on the configured Port that will accept web service invocations on the configured Path: At this point we are “almost” ready to try out the asynchronous test. But first we must provide the web service addressing (WS-A) configuration on the request message. We will edit the message for the request interface that was generated when the project was created (SimpleAsyncBPELProcessBinding > process > Request 1 in this example). At the bottom of the request message editor you will find the WS-A configuration by left-clicking on the WS-A label: Here we will setup WS-A by changing the default values to: Must understand: TRUE Add default wsa:Action: Add default wsa:Action (checked) Reply to: ${host where soapUI is running}:${MockService Port}${MockService Path} … in this example: http://192.168.1.181:8088/mockSimpleAsyncBPELProcessCallbackBinding/processResponse We now are ready to run the asynchronous test from soapUI free edition. Make sure that the MockService you created is running and then push the play button for the request (green triangle in the upper left-hand corner of the request editor). If everything is configured correctly, you should see the response show up in the MockService window: To view the response message/payload, just double-click on a response message in the Message Log window of the MockService: At this point you can now expand the project to include a Test Suite for some load balance tests etc. This same topic has been covered in various detail on other sites/blogs, but I wanted to simplify and detail how this is done in the context of SOA Suite 11g. It also serves as a nice introduction to another blog of mine: SOA Suite 11g Dynamic Payload Testing with soapUI Free Edition.

Read the article

Want a headless build server for SSDT without installing Visual Studio? You’re out of luck!

- by jamiet

An issue that regularly seems to rear its head on my travels is that of headless build servers for SSDT. What does that mean exactly? Let me give you my interpretation of it. A SQL Server Data Tools (SSDT) project incorporates a build process that will basically parse all of the files within the project and spit out a .dacpac file. Where an organisation employs a Continuous Integration process they will likely want to automate the building of that dacpac whenever someone commits a change to the source control repository. In order to do that the organisation will use a build server (e.g. TFS, TeamCity, Jenkins) and hence that build server requires all the pre-requisite software that understands how to build an SSDT project. The simplest way to install all of those pre-requisites is to install SSDT itself however a lot of folks don’t like that approach because it installs a lot unnecessary components on there, not least Visual Studio itself. Those folks (of which i am one) are of the opinion that it should be unnecessary to install a heavyweight GUI in order to simply get a few software components required to do something that inherently doesn’t even need a GUI. The phrase “headless build server” is often used to describe a build server that doesn’t contain any heavyweight GUI tools such as Visual Studio and is a desirable state for a build server. In his blog post Headless MSBuild Support for SSDT (*.sqlproj) Projects Gert Drapers outlines the steps necessary to obtain a headless build server for SSDT: This article describes how to install the required components to build and publish SQL Server Data Tools projects (*.sqlproj) using MSBuild without installing the full SQL Server Data Tool hosted inside the Visual Studio IDE. http://sqlproj.com/index.php/2012/03/headless-msbuild-support-for-ssdt-sqlproj-projects/ Frankly however going through these steps is a royal PITA and folks like myself have longed for Microsoft to support headless build support for SSDT by providing a distributable installer that installs only the pre-requisites for building SSDT projects. Yesterday in MSDN forum thread Building a VS2013 headless build server - it's sooo hard Mike Hingley complained about this very thing and it prompted a response from Kevin Cunnane from the SSDT product team: The official recommendation from the TFS / Visual Studio team is to install the version of Visual Studio you use on the build machine. I, like many others, would rather not have to install full blown Visual Studio and so I asked: Is there any chance you'll ever support any of these scenarios: Installation of all build/deploy pre-requisites without installing the VS shell? TFS shipping with all of the pre-requisites for doing SSDT project build/deploys 3rd party build servers (e.g. TeamCity) shipping with all of the requisites for doing SSDT project build/deploys I have to say that the lack of a single installer containing all the pre-requisites for SSDT build/deploy puzzles me. Surely the DacFX installer would be a perfect vehicle for that? Kevin replied again: The answer is no for all 3 scenarios. We looked into this issue, discussed it with the Visual Studio / TFS team, and in the end agreed to go with their latest guidance which is to install Visual Studio (e.g. VS2013 Express for Web) on the build machine. This is how Visual Studio Online is doing it and it's the approach recommended for customers setting up their own TFS build servers. I would hope this is compatible with 3rd party build servers but have not verified whether this works with TeamCity etc. Note that DacFx MSI isn't a suitable release vehicle for this as we don't want to include Visual Studio/MSBuild dependencies in that package. It's meant to just include the core DacFx DLLs used by SSMS, SqlPackage.exe on the command line, etc. What this means is we won't be providing a separate MSI installer or nuget package with just the necessary build DLLs you need to run your build and tests. If someone wanted to create a script that generated a nuget package based on our DLLs and targets files, then release that somewhere on the web for easier integration with 3rd party build servers we've no problem with that. Again, here’s the link to the thread and its worth reading in its entirety if this is something that interests you. So there you have it. Microsoft will not be be providing support for headless build servers for SSDT but if someone in the community wants to go ahead and roll their own, go right ahead. @Jamiet

Read the article

Customize Team Build 2010 – Part 12: How to debug my custom activities

In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application Developers are “spoilt” persons who expect to be able to have easy debugging experiences for every technique they work with. So they also expect it when developing custom activities for the build process template. This post describes how you can debug your custom activities without having to develop on the build server itself. Remote debugging prerequisites The prerequisite for these steps are to install the Microsoft Visual Studio Remote Debugging Monitor. You can find information how to install this at http://msdn.microsoft.com/en-us/library/bt727f1t.aspx. I chose for the option to run the remote debugger on the build server from a file share. Debugging symbols prerequisites To be able to start the debugging, you need to have the pdb files on the buildserver together with the assembly. The pdb must have been build with Full Debug Info. Steps In my setup I have a development machine and a build server. To setup the remote debugging, I performed the following steps Locate on your development machine the folder C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\Remote Debugger Create a share for the Remote Debugger folder. Make sure that the share (and the folder) has the correct permissions so the user on the build server has access to the share. On the build server go to the shared “Remote Debugger” folder Start msvsmon.exe which is located in the folder that represents the platform of the build server. This will open a winform application like Go back to your development machine and open the BuildProcess solution. Start the Attach to process command (Ctrl+Alt+P) Type in the Qualifier the name of the build server. In my case the user account that has started the msvsmon is another user then the user on my development machine. In that case you have to type the qualifier in the format that is shown in the Remote Debugging Monitor (in my case LOCAL\Administrator@TFSLAB) and confirm it by pressing <Enter> Since the build service is running with other credentials, check the option “Show processes from all users”. Now the Attach to process dialog shows the TFSBuildServiceHost process Set the breakpoint in the activity you want to debug and kick of a build. Be aware that when you attach to the TFSBuildServiceHost that you debug every single build that is run by this windows service, so make sure you don’t debug the build server that is in production! You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

Read the article

Expression Studio 4 - without SketchFlow…

- by mbcrump

is kinda like an explosion with no “Ka-Boom”… I was excited to hear the news yesterday at Microsoft Teched that Expression Studio 4 had officially launched. MSDN subscribers could log in and download the full release. So, I logged into my MSDN account and started downloading Expression Studio 4 Premium thinking that I was only minutes away from trying out SketchFlow 4. To my dismay, I launched Blend 4 and noticed it did not say SketchFlow on the splash screen. So, I went to New Project and the template was not available. After some digging around on the net, I learned my premium MSDN subscription did not include SketchFlow and I would need to purchase the Ultimate Edition. Below is a excerpt directly from Microsoft: Q: What products are included in the Microsoft Expression Studio 4 Ultimate? A: Expression Studio 4 Ultimate is comprised of 4 products, Expression Web 4, Microsoft Expression Blend® 4 + SketchFlow, Expression Encoder 4 Pro and Expression Design 4. Expression Blend 4 includes SketchFlow in Expression Studio 4 Ultimate product only. Q: What products are included in the Microsoft Expression Studio 4 Premium? A: Expression Studio 4 Premium is comprised of 4 products, Expression Web 4, Microsoft Expression Blend 4, Expression Encoder 4 and Expression Design 4. Expression Studio 4 Premium is not available for retail purchase. Q: What products are included in the Microsoft Expression Studio 4 Web Professional? A: Expression Studio 4 Web Professional is comprised of 3 products, Expression Web 4, Expression Encoder 4 and Expression Design 4. As you can see, we got screwed on this deal and plenty of people are complaining: Kiran Says: 6.07.2010 at 5:07 PM No SketchFlow for Expression Studio 4 Premium? What a bumper for Microsoft Partners!! Martin Says: 6.07.2010 at 6:18 PM Why does Expression Professional Subscription not include upgrades and new releases of Expression Studio. Good question hey. I bought my subscription 5 days ago thinking I would get what i purchased but no Expression upgrades or new releases for me, what a waste of money. I think I am not the only long term user of this software that feels disgruntled. Sorry john just had to tell someone. shaggygi Says: 6.07.2010 at 7:31 PM SketchFlow NOT included in Studio 4? WTF! I repeat.... WT...Freaking.... F! This is totally unacceptable. My development team purchased VS 2010 Premium w/ MSDN with the impression by Adam Kinney, Scott Guthrie, etc. that this would be included in the Premium package or some sort of free upgrade. I understand this is a Marketing thing, but come on! I believe, at very least, this should have been explained in detail before this release. John Papa... as a rep to give feedback to the team... Please please and please.... tell powers-at-be to fix this problem. Sorry for the rant. Besides this issue, I believe it is a very good product:) Thanks Vaclav Elias Says: 6.08.2010 at 4:30 AM Well, I am also not happy that SketchFlow is only for the chosen ones :-) It is very nice product. Actually, kind of foundation for web development so they could really support any MSDN subscribers.. :-( I am hoping that Microsoft will make this right for all of us with MSDN premier subscriptions. In the meantime, you can check out the 5 day training series available here.

Read the article

Steps for MySQL DB Replication

- by Manish Agrawal

Following are the steps for MySQL Replication implementation on Linux machine: Pre-implementation steps for DB Replication: 1. Identify the databases to be replicated 2. Identify the tables to be ignored during replication per database for example log tables 3. Carefully identify and replace the variables and paths(locations) mentioned (in bold) in the commands given below with appropriate values 4. Schedule the maintenance activity in odd hours as these activities will affect all the databases on Master database server Implementation steps for DB Replication: 1. Configure the /etc/my.cnf file on Master database server to enable Binary logging, setting of server id and configuring of dbnames for which logging should be done. [mysqld] log-bin=mysql-bin server-id=1 binlog-do-db = dbname Note: You can specify multiple DB in binlog-do-db by using comma separated dbname values like: dbname1, dbname2, …, dbnameN 2. On Master database, Grant Replication Slave Privileges, by executing following command on mysql prompt mysql> GRANT REPLICATION SLAVE ON *.* TO slaveuser@<hostname> identified by ‘slavepassword’; 3. Stop the Master & Slave database by giving the command mysqladmin shutdown 4. Start the Master database by giving the command /usr/local/mysql-5.0.22/bin/mysqld_safe --user=user& 5. mysql> FLUSH TABLES WITH READ LOCK; Note: Leave the client (putty session) from which you issued the FLUSH TABLES statement running, so that the read lock remains in effect. If you exit the client, the lock is released. 6. mysql > SHOW MASTER STATUS; +---------------+----------+--------------+------------------+ | File | Position | Binlog_Do_DB | Binlog_Ignore_DB | +---------------+----------+--------------+------------------+ | mysql-bin.003 | 117 | dbname | | +---------------+----------+--------------+------------------+ Note: Note this information as this will be required while starting of Slave and replication in later steps 7. Take MySQL dump by giving the following command, In another session window (putty window) run the following command: mysqldump –u user --ignore-table=dbname.tbl_name -–ignore-table=dbname.tbl_name2 --master-data dbname > dbname_dump.db Note: When choosing databases to include in the dump, remember that you will need to filter out databases on each slave that you do not want to include in the replication process. 8. Unlock the tables on Master by giving following command: mysql> UNLOCK TABLES; 9. Copy the dump file to Slave DB server 10. Startup the Slave by using option --skip-slave /usr/local/mysql-5.0.22/bin/mysqld_safe --user=user --skip-slave& 11. Restore the dump file on Slave DB server mysql –u user dbname < dbname_dump.db 12. Stop the Slave database by giving the command mysqladmin shutdown 13. Configure the /etc/my.cnf file on the Slave database server [mysqld] server-id=2 replicate-ignore-table = dbname.tablename 14. Start the Slave Mysql Server with 'replicate-do-db=DB name' option. /usr/local/mysql-5.0.22/bin/mysqld_safe --user=user --replicate-do-db=dbname --skip-slave 15. Configure the settings at Slave server for Master host name, log filename and position within the log file as shown in Step 6 above Use Change Master statement in the MySQL session mysql> CHANGE MASTER TO MASTER_HOST='<master_host_name>', MASTER_USER='<replication_user_name>', MASTER_PASSWORD='<replication_password>', MASTER_LOG_FILE='<recorded_log_file_name>', MASTER_LOG_POS=<recorded_log_position>; 16. On Slave Servers mysql prompt give the following command: a. mysql > START SLAVE; b. mysql > SHOW SLAVE STATUS; Note: To stop slave for backup or any other activity you can use the following command on the Slave Servers mysql prompt: mysql> STOP SLAVE Refer following links for more information on MySQL DB Replication: http://dev.mysql.com/doc/refman/5.0/en/replication-options.html http://crazytoon.com/2008/04/21/mysql-replication-replicate-by-choice/ http://dev.mysql.com/doc/refman/5.0/en/mysqldump.html

Read the article

Speed up SQL Server queries with PREFETCH

- by Akshay Deep Lamba

Problem The SAN data volume has a throughput capacity of 400MB/sec; however my query is still running slow and it is waiting on I/O (PAGEIOLATCH_SH). Windows Performance Monitor shows data volume speed of 4MB/sec. Where is the problem and how can I find the problem? Solution This is another summary of a great article published by R. Meyyappan at www.sqlworkshops.com. In my opinion, this is the first article that highlights and explains with working examples how PREFETCH determines the performance of a Nested Loop join. First of all, I just want to recall that Prefetch is a mechanism with which SQL Server can fire up many I/O requests in parallel for a Nested Loop join. When SQL Server executes a Nested Loop join, it may or may not enable Prefetch accordingly to the number of rows in the outer table. If the number of rows in the outer table is greater than 25 then SQL will enable and use Prefetch to speed up query performance, but it will not if it is less than 25 rows. In this section we are going to see different scenarios where prefetch is automatically enabled or disabled. These examples only use two tables RegionalOrder and Orders. If you want to create the sample tables and sample data, please visit this site www.sqlworkshops.com. The breakdown of the data in the RegionalOrders table is shown below and the Orders table contains about 6 million rows. In this first example, I am creating a stored procedure against two tables and then execute the stored procedure. Before running the stored proceudre, I am going to include the actual execution plan. --Example provided by www.sqlworkshops.com --Create procedure that pulls orders based on City --Do not forget to include the actual execution plan CREATE PROC RegionalOrdersProc @City CHAR(20) AS BEGIN DECLARE @OrderID INT, @OrderDetails CHAR(200) SELECT @OrderID = o.OrderID, @OrderDetails = o.OrderDetails FROM RegionalOrders ao INNER JOIN Orders o ON (o.OrderID = ao.OrderID) WHERE City = @City END GO SET STATISTICS time ON GO --Example provided by www.sqlworkshops.com --Execute the procedure with parameter SmallCity1 EXEC RegionalOrdersProc 'SmallCity1' GO After running the stored procedure, if we right click on the Clustered Index Scan and click Properties we can see the Estimated Numbers of Rows is 24. If we right click on Nested Loops and click Properties we do not see Prefetch, because it is disabled. This behavior was expected, because the number of rows containing the value ‘SmallCity1’ in the outer table is less than 25. Now, if I run the same procedure with parameter ‘BigCity’ will Prefetch be enabled? --Example provided by www.sqlworkshops.com --Execute the procedure with parameter BigCity --We are using cached plan EXEC RegionalOrdersProc 'BigCity' GO As we can see from the below screenshot, prefetch is not enabled and the query takes around 7 seconds to execute. This is because the query used the cached plan from ‘SmallCity1’ that had prefetch disabled. Please note that even if we have 999 rows for ‘BigCity’ the Estimated Numbers of Rows is still 24. Finally, let’s clear the procedure cache to trigger a new optimization and execute the procedure again. DBCC freeproccache GO EXEC RegionalOrdersProc 'BigCity' GO This time, our procedure runs under a second, Prefetch is enabled and the Estimated Number of Rows is 999. The RegionalOrdersProc can be optimized by using the below example where we are using an optimizer hint. I have also shown some other hints that could be used as well. --Example provided by www.sqlworkshops.com --You can fix the issue by using any of the following --hints --Create procedure that pulls orders based on City DROP PROC RegionalOrdersProc GO CREATE PROC RegionalOrdersProc @City CHAR(20) AS BEGIN DECLARE @OrderID INT, @OrderDetails CHAR(200) SELECT @OrderID = o.OrderID, @OrderDetails = o.OrderDetails FROM RegionalOrders ao INNER JOIN Orders o ON (o.OrderID = ao.OrderID) WHERE City = @City --Hinting optimizer to use SmallCity2 for estimation OPTION (optimize FOR (@City = 'SmallCity2')) --Hinting optimizer to estimate for the currnet parameters --option (recompile) --Hinting optimize not to use histogram rather --density for estimation (average of all 3 cities) --option (optimize for (@City UNKNOWN)) --option (optimize for UNKNOWN) END GO Conclusion, this tip was mainly aimed at illustrating how Prefetch can speed up query execution and how the different number of rows can trigger this.

Read the article

GCC 4.2.1 Compiling on Cygwin(Win7 64bit) for iPhone [closed]

- by Kenneth Noland

Hey This is going to take a long while to explain, but the short version is that I am currently attempting to compile the LLVM GCC frontend for ARMv7 to compile apps for the Cortex-A8(iPhone 3GS). I'm running into an error from LD when compiling libgcc(part of the gcc compilation process) that has been driving me mad! The command is this: /usr/llvm-gcc-4.2-2.8.source/build/./gcc/xgcc \ -B/usr/llvm-gcc-4.2_2.8.source/build/./gcc \ -B/usr/local/arm-apple-darwin/bin \ -B/usr/local/arm-apple-darwin/lib \ -isystem /usr/local/arm-apple-darwin/include \ -isystem /usr/local/arm-apple-darwin/sys-include \ -O2 -g -W -Wall -Wwrite-strings -wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -fno-inline -dynamiclib -nodefaultlibs -W1,-dead_strip \ -marm \ -install_name /usr/local/arm-apple-darwin/lib/libgcc_s.1.dylib \ -single_module -o ./libgcc_s.1.dylib.tmp \ -W1,-exported_symbols_list,libgcc/./libgcc.map -compatibility_version 1 -current_version 1.0 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -Dinhibit_libc \ ... long list of .o files ... \ -lc And the result is typically a lot of undefined references to malloc, free, exit, etc. which typically indicate that libc is not getting compiled in. After going through the list of errors that ld is throwing, I see at the top that it is attempting to pull in /usr/lib/libc.a and complains that it is not the correct platform. Okay, that makes sense, so I spent 5 minutes on google and found an answer. Turns out that if I copy the libSystem.dylib and rename it to libc.dylib, that should solve the problem, but it doesn't. I couldn't find a copy of that file on my phone, so I pulled it directly from the SDK. I then get this strange error: ld64: in /usr/local/arm-apple-darwin/lib/libc.dylib, can't re-map file, errno=22 At this point, I did everything I could think of. I grabbed a fresh copy of my /usr/lib folder from my iphone and confirmed that libSystem.dylib(and libSystem.B.dylib) wasn't there. I unpacked the raw .ipsw package for iOS 4.2.1 and once again, I could not find a copy of libSystem.dylib there either. I unpacked the iPhoneSDK and MacOS SDK and I managed to find a copy of it in both, but that error just kept persisting. I copied libSystem.dylib, libSystem.B.dylib, tried all sorts of combinations of renaming to libc.dylib and still nothing but errors. I can't find a way to get it to recognize the file and link against it. I also tried linking against the libc.a located in the iphone SDK and that didn't work either. I checked what ./xgcc was firing off, and it was my freshly built copy of arm-apple-darwin-ld64 which should be fine. A little bit of background here. I built LLVM+Clang 2.8 with no errors, and I rebuilt the ODCCTools with some light modifications to get it to compile on Cygwin(I'll post my changes in a patch along with a tutorial if I can get this to work). I also grabbed the iphone-dev "includes" and "csu" project and those completed successfully, although there really is no point to them since I can't get it to link against crt0.a. I'm running out of ideas here. Can anyone help me out on this?

Read the article

Common business drivers that lead to creating and sustaining a project

Common business drivers that lead to creating and sustaining a project include and are not limited to: cost reduction, increased return on investment (ROI), reduced time to market, increased speed and efficiency, increased security, and increased interoperability. These drivers primarily focus on streamlining and reducing cost to make a company more profitable with less overhead. According to Answers.com cost reduction is defined as reducing costs to improve profitability, and may be implemented when a company is having financial problems or prevent problems. ROI is defined as the amount of value received relative to the amount of money invested according to PayperclickList.com. With the ever increasing demands on businesses to compete in today’s market, companies are constantly striving to reduce the time it takes for a concept to become a product and be sold within the global marketplace. In business, some people say time is money, so if a project can reduce the time a business process takes it in fact saves the company which is always good for the bottom line. The Social Security Administration states that data security is the protection of data from accidental or intentional but unauthorized modification, destruction. Interoperability is the capability of a system or subsystem to interact with other systems or subsystems. In my personal opinion, these drivers would not really differ for a profit-based organization, compared to a non-profit organization. Both corporate entities strive to reduce cost, and strive to keep operation budgets low. However, the reasoning behind why they want to achieve this does contrast. Typically profit based organizations strive to increase revenue and market share so that the business can grow. Alternatively, not-for-profit businesses are more interested in increasing their reach within communities whether it is to increase annual donations or invest in the lives of others. Success or failure of a project can be determined by one or more of these drivers based on the scope of a project and the company’s priorities associated with each of the drivers. In addition, if a project attempts to incorporate multiple drivers and is only partially successful, then the project might still be considered to be a success due to how close the project was to meeting each of the priorities. Continuous evaluation of the project could lead to a decision to abort a project, because it is expected to fail before completion. Evaluations should be executed after the completion of every software development process stage. Pfleeger notes that software development process stages include: Requirements Analysis and Definition System Design Program Design Program Implementation Unit Testing Integration Testing System Delivery Maintenance Each evaluation at every state should consider all the business drivers included in the scope of a project for how close they are expected to meet expectations. In addition, minimum requirements of acceptance should also be included with the scope of the project and should be reevaluated as the project progresses to ensure that the project makes good economic sense to continue. If the project falls below these benchmarks then the project should be put on hold until it does make more sense or the project should be aborted because it does not meet the business driver requirements. References Cost Reduction Program. (n.d.). Dictionary of Accounting Terms. Retrieved July 19, 2009, from Answers.com Web site: http://www.answers.com/topic/cost-reduction-program Government Information Exchange. (n.d.). Government Information Exchange Glossary. Retrieved July 19, 2009, from SSA.gov Web site: http://www.ssa.gov/gix/definitions.html PayPerClickList.com. (n.d.). Glossary Term R - Pay Per Click List. Retrieved July 19, 2009, from PayPerClickList.com Web site: http://www.payperclicklist.com/glossary/termr.html Pfleeger, S & Atlee, J.(2009). Software Engineering: Theory and Practice. Boston:Prentice Hall Veluchamy, Thiyagarajan. (n.d.). Glossary « Thiyagarajan Veluchamy’s Blog. Retrieved July 19, 2009, from Thiyagarajan.WordPress.com Web site: http://thiyagarajan.wordpress.com/glossary/

Read the article

Build Your Own CE6 Kernel

- by Kate Moss' Big Fan

The Share Source Program in Windows CE provides many modules in %_WINCEROOT%\Private\ tree, and the kernel is one of them! Although it is not full source of kernel but it is good enough for tracing it, even tweak the kernel. Tracing the kernel and see how it works is lots of fun, but it is fascinated to modify and verify the change you made. So first comes first, where is the source of kernel? It's in your %_WINCEROOT%\private\winceos\COREOS\nk\ And next question will be "How do I build it?", Some of you may say just "build -c" there and it should be good. If you are the owner of kernel and got full source, that is definitely the right answer, but none of them are applied to our case though. So what should I do? Let's dig deeper into the coreos\nk folder, there are a couples of subfolder, CELOG, KDSTUB, KERNEL and etc. KERNEL\ is the main component of kernel.dll, in the other word, most of the modify to kernel is going to happen here. And the good thing is, you could "build -c" in %_WINCEROOT%\private\winceos\COREOS\nk\kernel\ with no error at all. But before doing that, remember to backup eveything you are going to modify, including the source and binaries; remember, this is not something belong to you, and if you didn't restore them back later, it could end up confuse the subsequence QFE updates! Here is the steps Backup the source code, I will suggest the whole %_WINCEROOT%\private\winceos\COREOS\nk\ Backup the binaries in common\oak\lib\, and again if you are not sure which files, backup the whole %_WINCEROOT%\common\oak\lib\ is the safest way. Do whatever modification you want in %_WINCEROOT%\private\winceos\COREOS\nk\kernel\ build -c in %_WINCEROOT%\private\winceos\COREOS\nk\kernel If everything went well so far, you should get a new nkmain.lib,nkmain.pdb, nkprmain.lib and nkprmain.pdb in %_WINCEROOT%\public\common\oak\lib\%_TGTCPU%\%WINCEDEBUG%\ Basically, you just rebuild your new kernel, the rest is to "blddemo clean -q" to have your new kernel SYSGEN'd and include in your OS Image. Or just "set WINCEREL=1" then "sysgen -p common nk nkprof" and "makeimg" if you can't wait another minutes for "blddemo clean -q" Tat sounds good, but some of you may not like the idea to alter any code in private folder, and not to mention how annoying to backup/restore files every time. Better idea? Yes, Microsoft provides a tool SYSGEN_CAPTURE (http://msdn.microsoft.com/en-us/library/ee504678.aspx for detail and usage) to creates Sources files for public drivers that you want to modify and build in your platform directory. In fact, not only public drivers, virtually anything in the %_WINCEROOT%\public\<project name>\cesysgen\makefile can be captured, and of course including kernel. So I am going to introduce a second way to build your own kernel by using SYSGEN_CAPTURE tool. Again the steps Create a folder in your BSP for building kernel, says %_TARGETPLATROOT%\SRC\Kernel. Use "SYSGEN_CAPTURE -p common nk" and then you will get a SOURCES.KERN, you could also "SYSGEN_CAPTURE -p common nkprof" to generate profiler enabled kernel. rename the SOURCE.KERN to SOURCES and copy one of the sample makefile into your kernel directory. For example the one in PRIVATE\WINCEOS\COREOS\NK\KERNEL\NKNORMAL. Copy the source files you want to modify from private\winceos\coreos\nk\kernel\ into your kernel directory. Modifying the SOURCES= macro to the source files you addes in step 4. For example, if you copied the vm.c, it is going to be SOURCES=vm.c Refer to the private\winceos\COREOS\nk\kernel\sources.inc and add macro defines and proper include path in your SOURCES file. "set WINCEREL=1", "build -c" in your kernel directory and "makeimg", voila! Here is an example for the MACROS you need to add in x86 Here are the macros for x86 CDEFINES=$(CDEFINES) -DIN_KERNEL -DWINCEMACRO -DKERN_CORE # Machine independent defines CDEFINES=$(CDEFINES) -DDBGSUPPORT _COREOSROOT=$(_WINCEROOT)\private\winceos\coreos INCLUDES=$(_COREOSROOT)\inc;$(_COREOSROOT)\nk\inc !IFDEF DP_SETTINGS CDEFINES=$(CDEFINES) -DDP_SETTINGS=$(DP_SETTINGS) !ENDIF ASM_SAFESEH=1 CDEFINES=$(CDEFINES) -Gs100000 -DENCODE_GS_COOKIE

Read the article

IIS Logfile Visualization with XNA

- by BobPalmer

In my office, I have a wall mounted monitor who's whole purpose in life is to display perfmon stats from our various servers. And on a fairly regular basis, I have folks walk by asking what the lines mean. After providing the requisite explaination about CPU utilization, disk I/O bottlenecks, etc. this is usually followed by some blank stares from the user in question, and a distillation of all of our engineering wizardry down to the phrase 'So when the red line goes up that's bad then?' This of course would not do. So I talked to my friends and our network admin about an option to show something more eye catching and visual, with which we could catch at a glance a feel for what was up with our site. He initially pointed me out to a video showing GLTail and Chipmunk done in Ruby. Realizing this was both awesome, and that I needed an excuse to do something in XNA, I decided to knock out a proof of concept for something very similar, but with a few tweaks. Here's a link to a video of the current prototype: http://www.youtube.com/watch?v=jM_PWZbtH2I Essentially this app opens up a log file (even an active one) and begins pulling out the lines of text. (Here's a good Code Project link that covers how to do tail reading from an active text file: http://www.codeproject.com/KB/files/tail.aspx). As new data is added, a bubble is generated in the application - a GET statement comes from the left, and a POST from the right. I then run it through a series of expression checkers, and based on the kind of statement and the pattern, a bubble of an appropriate color is generated. For example, if I get a 500, a huge red bubble pops out. Others are based on the part of the system the page is from - i.e. green bubbles are from our claims management subsystem, and blue bubbles are from the pages our scheduling staff use to schedule patients. Others include the purple bubbles for security and login, and yellow bubbles for some miscellaneous pages. The little grey bubbles represent things like images, JS, CSS, etc - and their small size makes them work like grease to keep the larger page bubbles moving. The app is also smart enough that if it is starting to bog down with handling the physics and interactions, it will suspend new bubbles until enough have dropped off that performance can resume (you can see this slight stuttering in the sample video). The net result is that anyone will be able to look up on the wall monitor, and instantly get a quick feel for how things are going on the floor. Website slow? You can get a feel for both volume and utilized modules with one glance. Website crashing? Look for a wall of giant red bubbles. No activity at all? Maybe the site is down. Now couple this with utilization within a farm, and cross referenced with a second app showing the same kind of data from your SQL database... As for the app itself, it's a windows XNA project with the code in C#. The physics are handled by the Farseer physicis eingine for XNA (http://www.codeplex.com/FarseerPhysics) which is just pure goodness. The samples are great, and I had the app up and working in two evenings (half of that was fine tuning, and the other was me coding with a kid in my lap). My next steps include wiring this to SQL (I have some ideas...), and adding a nice configuration module. For example, you could use polygons, etc to tie to your regex - or more entertaining things like having a little human ragdoll to represent a user login. Once that's wrapped up and I have a chance to complete some hardening, I will be releasing the whole thing into the wild as opensource. Feel free to ping me if you have any questions! -Bob

Read the article

Entity Framework 4, WCF & Lazy Loading Tip

- by Dane Morgridge

If you are doing any work with Entity Framework and custom WCF services in EFv1, everything works great. As soon as you jump to EFv4, you may find yourself getting odd errors that you can’t seem to catch. The problem is almost always has something to do with the new lazy loading feature in Entity Framework 4. With Entity Framework 1, you didn’t have lazy loading so this problem didn’t surface. Assume I have a Person entity and an Address entity where there is a one-to-many relationship between Person and Address (Person has many Addresses). In Entity Framework 1 (or in EFv4 with lazy loading turned off), I would have to load the Address data by hand by either using the Include or Load Method: var people = context.People.Include("Addresses"); or people.Addresses.Load(); Lazy loading works when the first time the Person.Addresses collection is accessed: 1: var people = context.People.ToList(); 2: 3: // only person data is currently in memory 4: 5: foreach(var person in people) 6: { 7: // EF determines that no Address data has been loaded and lazy loads 8: int count = person.Addresses.Count(); 9: } 10: Lazy loading has the useful (and sometimes not useful) feature of fetching data when requested. It can make your life easier or it can make it a big pain. So what does this have to do with WCF? One word: Serialization. When you need to pass data over the wire with WCF, the data contract is serialized into either XML or binary depending on the binding you are using. Well, if I am using lazy loading, the Person entity gets serialized and during that process, the Addresses collection is accessed. When that happens, the Address data is lazy loaded. Then the Address is serialized, and the Person property is accessed, and then also serialized and then the Addresses collection is accessed. Now the second time through, lazy loading doesn’t kick in, but you can see the infinite loop caused by this process. This is a problem with any serialization, but I personally found it trying to use WCF. The fix for this is to simply turn off lazy Loading. This can be done at each call by using context options: context.ContextOptions.LazyLoadingEnabled = false; Turning lazy loading off will now allow your classes to be serialized properly. Note, this is if you are using the standard Entity Framework classes. If you are using POCO, you will have to do something slightly different. With POCO, the Entity Framework will create proxy classes by default that allow things like lazy loading to work with POCO. This proxy basically creates a proxy object that is a full Entity Framework object that sits between the context and the POCO object. When using POCO with WCF (or any serialization) just turning off lazy loading doesn’t cut it. You have to turn off the proxy creation to ensure that your classes will serialize properly: context.ContextOptions.ProxyCreationEnabled = false; The nice thing is that you can do this on a call-by-call basis. If you use a new context for each set of operations (which you should) then you can turn either lazy loading or proxy creation on and off as needed.

Read the article

Software Architecture verses Software Design

Recently, I was asked what the differences between software architecture and software design are. At a very superficial level both architecture and design seem to mean relatively the same thing. However, if we examine both of these terms further we will find that they are in fact very different due to the level of details they encompass. Software Architecture can be defined as the essence of an application because it deals with high level concepts that do not include any details as to how they will be implemented. To me this gives stakeholders a view of a system or application as if someone was viewing the earth from outer space. At this distance only very basic elements of the earth can be detected like land, weather and water. As the viewer comes closer to earth the details in this view start to become more defined. Details about the earth’s surface will start to actually take form as well as mane made structures will be detected. The process of transitioning a view from outer space to inside our earth’s atmosphere is similar to how an architectural concept is transformed to an architectural design. From this vantage point stakeholders can start to see buildings and other structures as if they were looking out of a small plane window. This distance is still high enough to see a large area of the earth’s surface while still being able to see some details about the surface. This viewing point is very similar to the actual design process of an application in that it takes the very high level architectural concept or concepts and applies concrete design details to form a software design that encompasses the actual implementation details in the form of responsibilities and functions. Examples of these details include: interfaces, components, data, and connections. In review, software architecture deals with high level concepts without regard to any implementation details. Software design on the other hand takes high level concepts and applies concrete details so that software can be implemented. As part of the transition between software architecture to the creation of software design an evaluation on the architecture is recommended. There are several benefits to including this step as part of the transition process. It allows for projects to ensure that they are on the correct path as to meeting the stakeholder’s requirement goals, identifies possible cost savings and can be used to find missing or nonspecific requirements that cause ambiguity in a design. In the book “Evaluating Software Architectures: Methods and Case Studies”, they define key benefits to adding an architectural review process to ensure that an architecture is ready to move on to the design phase. Benefits to evaluating software architecture: Gathers all stakeholders to communicate about the project Goals are clearly defined in regards to the creation or validation of specific requirements Goals are prioritized so that when conflicts occur decisions will be made based on goal priority Defines a clear expectation of the architecture so that all stakeholders have a keen understanding of the project Ensures high quality documentation of the architecture Enables discoveries of architectural reuse Increases the quality of architecture practices. I can remember a few projects that I worked on that could have really used an architectural review prior to being passed on to developers. This project was to create some new advertising space on the company’s website in order to sell space based on the location and some other criteria. I was one of the developer selected to lead this project and I was given a high level design concept and a long list of ever changing requirements due to the fact that sales department had no clear direction as to what exactly the project was going to do or how they were going to bill the clients once they actually agreed to purchase the Ad space. In my personal opinion IT should have pushed back to have the requirements further articulated instead of forcing programmers to code blindly attempting to build such an ambiguous project. Unfortunately, we had to suffer with this project for about 4 months when it should have only taken 1.5 to complete due to the constantly changing and unclear requirements. References Clements, P., Kazman, R., & Klein, M. (2002). Evaluating Software Architectures. Westford, Massachusetts: Courier Westford.

Read the article

MvcExtensions - ActionFilter

- by kazimanzurrashid

One of the thing that people often complains is dependency injection in Action Filters. Since the standard way of applying action filters is to either decorate the Controller or the Action methods, there is no way you can inject dependencies in the action filter constructors. There are quite a few posts on this subject, which shows the property injection with a custom action invoker, but all of them suffers from the same small bug (you will find the BuildUp is called more than once if the filter implements multiple interface e.g. both IActionFilter and IResultFilter). The MvcExtensions supports both property injection as well as fluent filter configuration api. There are a number of benefits of this fluent filter configuration api over the regular attribute based filter decoration. You can pass your dependencies in the constructor rather than property. Lets say, you want to create an action filter which will update the User Last Activity Date, you can create a filter like the following: public class UpdateUserLastActivityAttribute : FilterAttribute, IResultFilter { public UpdateUserLastActivityAttribute(IUserService userService) { Check.Argument.IsNotNull(userService, "userService"); UserService = userService; } public IUserService UserService { get; private set; } public void OnResultExecuting(ResultExecutingContext filterContext) { // Do nothing, just sleep. } public void OnResultExecuted(ResultExecutedContext filterContext) { Check.Argument.IsNotNull(filterContext, "filterContext"); string userName = filterContext.HttpContext.User.Identity.IsAuthenticated ? filterContext.HttpContext.User.Identity.Name : null; if (!string.IsNullOrEmpty(userName)) { UserService.UpdateLastActivity(userName); } } } As you can see, it is nothing different than a regular filter except that we are passing the dependency in the constructor. Next, we have to configure this filter for which Controller/Action methods will execute: public class ConfigureFilters : ConfigureFiltersBase { protected override void Configure(IFilterRegistry registry) { registry.Register<HomeController, UpdateUserLastActivityAttribute>(); } } You can register more than one filter for the same Controller/Action Methods: registry.Register<HomeController, UpdateUserLastActivityAttribute, CompressAttribute>(); You can register the filters for a specific Action method instead of the whole controller: registry.Register<HomeController, UpdateUserLastActivityAttribute, CompressAttribute>(c => c.Index()); You can even set various properties of the filter: registry.Register<ControlPanelController, CustomAuthorizeAttribute>( attribute => { attribute.AllowedRole = Role.Administrator; }); The Fluent Filter registration also reduces the number of base controllers in your application. It is very common that we create a base controller and decorate it with action filters and then we create concrete controller(s) so that the base controllers action filters are also executed in the concrete controller. You can do the same with a single line statement with the fluent filter registration: Registering the Filters for All Controllers: registry.Register<ElmahHandleErrorAttribute>(new TypeCatalogBuilder().Add(GetType().Assembly).Include(type => typeof(Controller).IsAssignableFrom(type))); Registering Filters for selected Controllers: registry.Register<ElmahHandleErrorAttribute>(new TypeCatalogBuilder().Add(GetType().Assembly).Include(type => typeof(Controller).IsAssignableFrom(type) && (type.Name.StartsWith("Home") || type.Name.StartsWith("Post")))); You can also use the built-in filters in the fluent registration, for example: registry.Register<HomeController, OutputCacheAttribute>(attribute => { attribute.Duration = 60; }); With the fluent filter configuration you can even apply filters to controllers that source code is not available to you (may be the controller is a part of a third part component). That’s it for today, in the next post we will discuss about the Model binding support in MvcExtensions. So stay tuned.

Read the article

How to make the constructor for the following exercise in c++?

- by user40630

This is the exercise I?m trying to solve. It's from C++, How to program book from Deitel and it's my homework. (Card Shuffling and Dealing) Create a program to shuffle and deal a deck of cards. The program should consist of class Card, class DeckOfCards and a driver program. Class Card should provide: a) Data members face and suit of type int. b) A constructor that receives two ints representing the face and suit and uses them to initialize the data members. c) Two static arrays of strings representing the faces and suits. d) A toString function that returns the Card as a string in the form “face of suit.” You can use the + operator to concatenate strings. Class DeckOfCards should contain: a) A vector of Cards named deck to store the Cards. b) An integer currentCard representing the next card to deal. c) A default constructor that initializes the Cards in the deck. The constructor should use vector function push_back to add each Card to the end of the vector after the Card is created and initialized. This should be done for each of the 52 Cards in the deck. d) A shuffle function that shuffles the Cards in the deck. The shuffle algorithm should iterate through the vector of Cards. For each Card, randomly select another Card in the deck and swap the two Cards. e) A dealCard function that returns the next Card object from the deck. f) A moreCards function that returns a bool value indicating whether there are more Cards to deal. The driver program should create a DeckOfCards object, shuffle the cards, then deal the 52 cards. The problem I'm facing is that I don't know exactly how to make the constructor for the second class. See description commented in the code bellow. #include <iostream> #include <vector> using namespace std; /* * */ //Class card. No problems here. class Card { public: Card(int, int); string toString(); private: int suit, face; static string faceNames[13]; static string suitNames[4]; }; string Card::faceNames[13] = {"Ace","Two","Three","Four","Five","Six","Seven","Eight","Nine","Ten","Queen","Jack","King"}; string Card::suitNames[4] = {"Diamonds","Clubs","Hearts","Spades"}; string Card::toString() { return faceNames[face]+" of "+suitNames[suit]; } Card::Card(int f, int s) :face(f), suit(s) { } /*The problem begins here. This class should create(when and object for it is created) a copy of the vector deck, right? But how exactly are these vector cards be initialized? I'll explain better in the constructor definition bellow.*/ class DeckOfCards { public: DeckOfCards(); void shuffleCards(); Card dealCard(); bool moreCards(); private: vector<Card> deck(52); int currentCard; }; int main(int argc, char** argv) { return 0; } DeckOfCards::DeckOfCards() { //This is where I'm stuck. I can't figure out how to set each of the 52 cards of the vector deck to have a specific suit and face every one of them, by using only the constructor of the Card class. //What you see bellow was one of my attempts to solve this problem but I blocked pretty soon in the middle of it. for(int i=0; i<deck.size(); i++) { deck[i]//....There is no function to set them. They must be set when initialized. But how?? } } For easier reading: http://pastebin.com/pJeXMH0f

Read the article

Java in Flux: Utopia or Deuteranopia?

- by Tori Wieldt

What a difference a year makes, indeed. Steve Harris, Senior VP, App Server Dev, Oracle and Adam Messinger, VP, Fusion Middleware Group, Oracle presented an informative keynote at the TheServerSide Java Symposium today. With a title "Java in Flux: Utopia or Deuteranopia?" you know things are going to be interesting (see Aeon Flux if you don't get the title reference).What a YearThey started with a little background, explaining that the reactions to Oracle's acquisition of Sun (and therefore Java) one year ago varied greatly, from "Freak Out!" to "Don't Panic." From the Oracle perspective, being the steward of and key contributor to Java requires a lot of sausage making. They admitted to Oracle's fair share of Homer Simpson-esque "D'oh" moments in the past year, which was complicated by Oracle's communication style. "Oracle has a tradition has a saying a few things and sticking by then, in contrast to Sun who was much more open," Adam explained. "We laid out the Java roadmap and are executing on it, and we hope that speaks to our commitment."Java SEAdam talked about having a long term perspective on the Java language (20+ years), letting ideas mature in more experimental languages, then bringing them into Java. Current priorities include: JVM convergence (getting the best features of JRockit into Hotspot); support of parallel/multi-core programming, and of course, all the improvements in JDK7. The JDK7 Developer Preview is underway (please download now and report bugs!). The Oracle development team is also working on Lambda and modularity (Jigsaw) for SE 8. Less certain, but also under discussion are improvements for Java SE 9. Adam is thinking of it as a "back to basics" release. He mentioned reworking JNI, improving data integration and improved device support.Java EE To provide context about Java EE, Steve said Java EE was great at getting businesses on the internet. The success of Java EE resulted in an incredible expansion of the middleware marketplace for developers and vendors. But with success, came more. Java EE kept piling on capabilities, but that created excess baggage. Doing simple things was no longer so simple. That's where Java community is so valuable: "When Java EE was too complex and heavyweight, many people were happy to tell us what we were doing wrong and popularize solutions," Steve explained. Because of that feedback, the Java EE teams focused on making things simple again: POJOs and annotations, and leveraging changes in Java SE. Steve said that "innovation doesn't happen in expert groups, it happens on the ground where developers are solving problems," and platform stewards need to pay attention and take advantage of changes that are taking place.Enter the Cloud "Developers are restless, they want cloud functionality from their own IT dept" Steve explained. With the cloud, the scope of problem has expanded to include the data center itself, with multiple tenants. To move forward, existing APIs in Java EE need to be updated to be tenant-aware, service-enabled, and EE needs to support various styles of deployment. The goal is to get all that done in Java EE 8.Adam questioned Steve about timing and schedule. "Yes, the schedule is aggressive, but it'll work" Steve said. Then Adam asked about modularization. If Java SE 8 comes out at the end of 2012, when can Java EE deliver modularization? Steve suggested that key stakeholders can come with up some pre-SE 8 agreement on how to expose the metadata about modules. He then alluded to Mark Reinhold and John Duimovich's keynote at EclipseCON next week. Stay tuned.Evil Master PlanIn conclusion, Adam finally admitted to Oracle's Evil Master Plan: 1) Invest in and improve Java SE and EE 2) Collaborate with the community 3) Broaden the marketplace for Java development. Bwaaaaaaaaahahaha! <rubs hands together>Key LinksJDK7 Developer Preview http://jdk7.java.net/preview/Oracle Technology Network http://www.oracle.com/technetwork/java/index.htmlTheServerSide Java Symposium http://javasymposium.techtarget.com/"Utopia or Deuteranopia?" http://en.wikipedia.org/wiki/Aeon_Flux

Read the article

ArchBeat Link-o-Rama Top 10 for August 2012

- by Bob Rhubart

The Top 10 most popular items shared via the OTN ArchBeat Facebook page for the month of August 2012. Now Available: Oracle SQL Developer 3.2 (3.2.09.23) New features include APEX listener, UI enhancements, and 12c database support. The Role of Oracle VM Server for SPARC in a Virtualization Strategy In this article, Matthias Pfutzner discusses hardware, desktop, and operating system virtualization, along with various Oracle virtualization technologies, including Oracle VM Server for SPARC. How to Manually Install Flash Player Plugin to see the Oracle Enterprise Manager Performance Page | Kai Yu So, you're a DBA and you want to check the Performance page in Oracle Enterprise Manager (11g or 12c). So you click the Performance tab and… nothing. Zip. Nada. The Flash plugin is a no-show. Relax! Oracle ACE Director Kai Yu shows you what you need to do to see all the pretty colors instead of that dull grey screen. Relationally Challenged (CX - CRM - EQ/RQ/CRQ) | Chris Warticki Self-proclaimed Oracle Support "spokesmodel" Chris Chris Warticki has some advice for those interested in Customer Relationship Management: "How about we just dumb it down, strip it to the core, keep it simple and LISTEN?! No more focus groups, no more surveys, and no need to gather more data. We have plenty of that. Why not just provide the customer what they are asking for?" Free WebLogic Server Course | Middleware Magic So you want to sharpen your Oracle WebLogic Server skills, but you prefer to skip the whole classroom bit and don't want to be bothered with dealing with an instructor? No problem! Oracle ACE Rene van Wijk, a prolific Middleware Magic blogger, has information on an Oracle WebLogic course you can take on your own time, at your own pace. Oracle VM VirtualBox 4.1.20 released Oracle VM VirtualBox 4.1.20 was just released at the community and Oracle download sites, reports the Fat Bloke. This is a maintenance release containing bug fixes and stability improvements. Optimizing OLTP Oracle Database Performance using Dell Express Flash PCIe SSDs | Kai Yu Oracle ACE Director Kai Yu shares resources based on "several extensive performance studies on a single node Oracle 11g R2 database as well as a two node 11gR2 Oracle Real Application clusters (RAC) database running on Dell PowerEdge R720 servers with Dell Express Flash PCIe SSDs on Oracle Enterprise Linux 6.2 platform." Oracle ACE sessions at Oracle OpenWorld With so many great sessions at this year's event, building your Oracle OpenWorld schedule can involve making a lot of tough choices. But you'll find that the sessions led by Oracle ACEs just might be the icing on the cake for your OpenWorld experience. MySQL Update: The Cleveland MySQL Meetup (Independence, OH) Oracle MySQL team member Benjamin Wood, a MySQL engineer and five year veteran of the MySQL organization, will speak at the Cleveland MySQL Meetup event on September 12. The presentation will include a MySQL 5.5 Overview, Oracle's Roadmap for MySQL, including specifics on MySQL 5.6, best practices and how to overcome development and operational MySQL challenges, and the new MySQL commercial extensions. Click the link for time and location information. Parsing XML in Oracle Database | Martijn van der Kamp Martijn van der Kamp's post deals with processing XML in PL/SQL code and processing the data into the database. Thought for the Day "Walking on water and developing software from a specification are easy if both are frozen." — Edward V. Berard Source: SoftwareQuotes.com

Read the article

Ubuntu 12.04 // Likewise Open // Unable to ever authenticate AD users

- by Rob

So Ubuntu 12.04, Likewise latest from the beyondtrust website. Joins domain fine. Gets proper information from lw-get-status. Can use lw-find-user-by-name to retrieve/locate users. Can use lw-enum-users to get all users. Attempting to login with an AD user via SSH generates the following errors in the auth.log file: Nov 28 19:15:45 hostname sshd[2745]: PAM unable to dlopen(pam_winbind.so): /lib/security/pam_winbind.so: cannot open shared object file: No such file or directory Nov 28 19:15:45 hostname sshd[2745]: PAM adding faulty module: pam_winbind.so Nov 28 19:15:51 hostname sshd[2745]: error: PAM: Authentication service cannot retrieve authentication info for DOMAIN\\user.name from remote.hostname Nov 28 19:16:06 hostname sshd[2745]: Connection closed by 10.1.1.84 [preauth] Attempting to login via the LightDM itself generates similar errors in the auth.log file. Nov 28 19:19:29 hostname lightdm: PAM unable to dlopen(pam_winbind.so): /lib/security/pam_winbind.so: cannot open shared object file: No such file or directory Nov 28 19:19:29 hostname lightdm: PAM adding faulty module: pam_winbind.so Nov 28 19:19:47 hostname lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "DOMAIN\user.name" Nov 28 19:19:52 hostname lightdm: [lsass-pam] [module:pam_lsass]pam_sm_authenticate error [login:DOMAIN\user.name][error code:40022] Nov 28 19:19:54 hostname lightdm: PAM unable to dlopen(pam_winbind.so): /lib/security/pam_winbind.so: cannot open shared object file: No such file or directory Nov 28 19:19:54 hostname lightdm: PAM adding faulty module: pam_winbind.so Attempting to login via a console on the system itself generates slightly different errors: Nov 28 19:31:09 hostname login[997]: PAM unable to dlopen(pam_winbind.so): /lib/security/pam_winbind.so: cannot open shared object file: No such file or directory Nov 28 19:31:09 hostname login[997]: PAM adding faulty module: pam_winbind.so Nov 28 19:31:11 hostname login[997]: [lsass-pam] [module:pam_lsass]pam_sm_authenticate error [login:DOMAIN\user.name][error code:40022] Nov 28 19:31:14 hostname login[997]: FAILED LOGIN (1) on '/dev/tty2' FOR 'DOMAIN\user.name', Authentication service cannot retrieve authentication info Nov 28 19:31:31 hostname login[997]: FAILED LOGIN (2) on '/dev/tty2' FOR 'DOMAIN\user.name', Authentication service cannot retrieve authentication info I am baffled. The errors obviously are correct, the file /lib/security/pam_winbind.so does not exist. If its a dependancy/required, surely it should be part of the package? I've installed/reinstalled, I've used the downloaded package from the beyondtrust website, i've used the repository, nothing seems to work, every method of installing this application generates the same errors for me. UPDATE : Hrmm, I thought likewise didn't use native winbind but its own modules. Installing winbind from apt-get uninstalls pbis-open (likewise) and generates failures when installing if pbis-open is installed first. Uninstalled winbind, reinstalled pbis-open, same issue as above. The file pam_winbind.so does not exist in that location. Setting up pbis-open-legacy (7.0.1.918) ... Installing Packages was successful This computer is joined to DOMAIN.LOCAL New libraries and configurations have been installed for PAM and NSS. Clearly it thinks it has installed it, but it hasn't. It may be a legacy issue with the previous attempt to configure domain integration manually with winbind. Does anyone have a working likewise-open installation and does the /etc/nsswitch.conf include references to winbind? Or do the /etc/pam.d/common-account or /etc/pam.d/common-password reference pam_winbind.so? I'm unsure if those entries are just legacy or setup by likewise. UPDATE 2 : Complete reinstall of OS fixed it and it worked seamlessly, like it was meant to and those 2 PAM files did NOT include entries for pam_winbind.so, so that was the underlying problem. Thanks for the assist.

Read the article

Lenovo X220 right click does not work with ubuntu 12.04

- by fulop

I am unable to right click with my new X220 Lenovo sub-notebook. I have read several workaround but even not know which one would help me. Can someone help me to find the solution or workaround? dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): -D_FORTIFY_SOURCE=2 dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions -Wl,-z,relro dpkg-buildpackage: source package xserver-xorg-input-synaptics dpkg-buildpackage: source version 1.6.2-1ubuntu1~precise2 dpkg-buildpackage: source changed by Timo Aaltonen <[email protected]> dpkg-buildpackage: host architecture amd64 dpkg-source --before-build xserver-xorg-input-synaptics-1.6.2 fakeroot debian/rules clean dh clean --with quilt,autoreconf,xsf --builddirectory=build/ dh_testdir -O--builddirectory=build/ dh_auto_clean -O--builddirectory=build/ dh_quilt_unpatch -O--builddirectory=build/ Removing patch 131_reset-num_active_touches-on-deviceoff.patch Restoring src/synaptics.c Removing patch 130_dont_enable_rightbutton_area.patch Restoring conf/50-synaptics.conf Removing patch 129_disable_three_touch_tap.patch Restoring src/synaptics.c Removing patch 128_disable_three_click_action.patch Restoring src/synaptics.c Removing patch 126_ubuntu_xi22.patch Restoring configure.ac Removing patch 125_option_rec_revert.patch Restoring test/fake-symbols.h Restoring test/fake-symbols.c Removing patch 124_syndaemon_events.patch Restoring tools/syndaemon.c Removing patch 118_quell_error_msg.patch Restoring tools/synclient.c Restoring tools/syndaemon.c Removing patch 115_evdev_only.patch Restoring conf/50-synaptics.conf Removing patch 106_always_enable_vert_edge_scroll.patch Restoring src/synaptics.c Removing patch 104_always_enable_tapping.patch Restoring src/synaptics.c Removing patch 103_enable_cornertapping.patch Restoring src/synaptics.c Removing patch 101_resolution_detect_option.patch Restoring include/synaptics-properties.h Restoring man/synaptics.man Restoring src/synapticsstr.h Restoring src/properties.c Restoring src/synaptics.c Restoring tools/synclient.c Removing patch 02-do-not-use-synaptics-for-keyboards.patch Restoring conf/11-x11-synaptics.fdi No patches applied dh_autoreconf_clean -O--builddirectory=build/ dh_clean -O--builddirectory=build/ dpkg-source -b xserver-xorg-input-synaptics-1.6.2 dpkg-source: warning: no source format specified in debian/source/format, see dpkg-source(1) dpkg-source: info: using source format `1.0' dpkg-source: info: building xserver-xorg-input-synaptics using existing xserver-xorg-input-synaptics_1.6.2.orig.tar.gz dpkg-source: info: building xserver-xorg-input-synaptics in xserver-xorg-input-synaptics_1.6.2-1ubuntu1~precise2.diff.gz dpkg-source: warning: the diff modifies the following upstream files: autogen.sh docs/README.alps docs/tapndrag.dia docs/trouble-shooting.txt dpkg-source: info: use the '3.0 (quilt)' format to have separate and documented changes to upstream files, see dpkg-source(1) dpkg-source: info: building xserver-xorg-input-synaptics in xserver-xorg-input-synaptics_1.6.2-1ubuntu1~precise2.dsc debian/rules build dh build --with quilt,autoreconf,xsf --builddirectory=build/ dh_testdir -O--builddirectory=build/ dh_quilt_patch -O--builddirectory=build/ Applying patch 02-do-not-use-synaptics-for-keyboards.patch patching file conf/11-x11-synaptics.fdi Hunk #1 succeeded at 9 (offset 7 lines). Applying patch 101_resolution_detect_option.patch patching file include/synaptics-properties.h patching file man/synaptics.man patching file src/properties.c Hunk #3 succeeded at 787 (offset 6 lines). patching file src/synaptics.c Hunk #2 succeeded at 1403 (offset 3 lines). Hunk #3 succeeded at 1421 (offset 3 lines). patching file src/synapticsstr.h patching file tools/synclient.c Applying patch 103_enable_cornertapping.patch patching file src/synaptics.c Hunk #1 succeeded at 762 with fuzz 1 (offset 202 lines). Applying patch 104_always_enable_tapping.patch patching file src/synaptics.c Hunk #1 succeeded at 662 with fuzz 2 (offset 6 lines). Applying patch 106_always_enable_vert_edge_scroll.patch patching file src/synaptics.c Hunk #1 succeeded at 673 (offset 174 lines). Applying patch 115_evdev_only.patch patching file conf/50-synaptics.conf Hunk #1 succeeded at 14 with fuzz 2. Applying patch 118_quell_error_msg.patch patching file tools/synclient.c patching file tools/syndaemon.c Applying patch 124_syndaemon_events.patch patching file tools/syndaemon.c Applying patch 125_option_rec_revert.patch patching file test/fake-symbols.c patching file test/fake-symbols.h Applying patch 126_ubuntu_xi22.patch patching file configure.ac Applying patch 128_disable_three_click_action.patch patching file src/synaptics.c Hunk #1 succeeded at 671 (offset 174 lines). Applying patch 129_disable_three_touch_tap.patch patching file src/synaptics.c Hunk #1 succeeded at 665 (offset 32 lines). Applying patch 130_dont_enable_rightbutton_area.patch patching file conf/50-synaptics.conf Applying patch 131_reset-num_active_touches-on-deviceoff.patch patching file src/synaptics.c Applying patch 201-wait.patch patching file src/eventcomm.c Hunk #1 FAILED at 750. Hunk #2 FAILED at 775. Hunk #3 FAILED at 784. 3 out of 3 hunks FAILED -- rejects in file src/eventcomm.c Patch 201-wait.patch does not apply (enforce with -f) dh_quilt_patch: quilt --quiltrc /dev/null push -a || test $? = 2 returned exit code 1 make: *** [build] Error 25 dpkg-buildpackage: error: debian/rules build gave error exit status 2

Read the article

Oracle Unified Method (OUM) Release 5.6

- by user714714

ORACLE® UNIFIED METHOD RELEASE 5.6 Oracle’s Full Lifecycle Methodfor Deploying Oracle-Based Business Solutions About | Release | Access | Previous Announcements About Oracle is evolving the Oracle® Unified Method (OUM) to achieve the vision of supporting the entire Enterprise IT Lifecycle, including support for the successful implementation of every Oracle product. OUM replaces Legacy Methods, such as AIM Advantage, AIM for Business Flows, EMM Advantage, PeopleSoft's Compass, and Siebel's Results Roadmap. OUM provides an implementation approach that is rapid, broadly adaptive, and business-focused. OUM includes a comprehensive project and program management framework and materials to support Oracle's growing focus on enterprise-level IT strategy, architecture, and governance. Release OUM release 5.6 provides support for Application Implementation, Cloud Application Implementation, and Software Upgrade projects as well as the complete range of technology projects including Business Intelligence (BI) and Enterprise Performance Management (EPM), Enterprise Security, WebCenter, Service-Oriented Architecture (SOA), Application Integration Architecture (AIA), Business Process Management (BPM), Enterprise Integration, and Custom Software. Detailed techniques and tool guidance are provided, including a supplemental guide related to Oracle Tutor and UPK. This release features: Business Process Management (BPM) Project Engineering Supplemental Guide Cloud Roadmap View and Supplemental Guide Enterprise Security View and Supplemental Guide Service-Oriented Architecture (SOA) Governance Implementation Supplemental Guide "Tailoring OUM for Your Project" White Paper OUM Microsoft Project Workplan Template and User's Guide Mappings: OUM to J.D. Edwards OneMethodology, OUM Roles to Task Techniques: Determining Number of Iterations, Managing an OUM Project using Scrum Templates: Scrum Workplan (WM.010), Siebel CRM Enhanced / Updated: Manage Focus Area reorganized by Activities for all Views Oracle Architecture Development Process (OADP) View updated for OADP v3.0 Oracle Support Services Supplemental Guide expanded to include guidance related to IT Change Management Oracle User Productivity Kit Professional (UPK Pro) and Tutor Supplemental Guide expanded guidance for UPK Pro Service-Oriented Architecture (SOA) Application Integration Architecture (AIA) Supplemental Guide updated for SOA Tactical Project Delivery View Service-Oriented Architecture (SOA) Tactical Project Delivery View expanded to include additional tasks Siebel CRM Supplemental Guide expanded task guidance and added select Siebel-specific OUM templates WebCenter View and Supplemental Guide updated for WebCenter Portal and Content Management For a comprehensive list of features and enhancements, refer to the "What's New" page of the Method Pack. Upcoming releases will provide expanded support for Oracle's Enterprise Application suites including product-suite specific materials and guidance for tailoring OUM to support various engagement types. Access Oracle Customers Oracle customers may obtain copies of the method for their internal use – including guidelines, templates, and tailored work breakdown structure – by contracting with Oracle for a consulting engagement of two weeks or longer and meeting some additional minimum criteria. Customers, who have a signed consulting contract with Oracle and meet the engagement qualification criteria, are permitted to download the current release of OUM for their perpetual use. They may also obtain subsequent releases published during a renewable, three-year access period. Training courses are also available to these customers. Contact your local Oracle Sales Representative about enrolling in the OUM Customer Program. Oracle PartnerNetwork (OPN) Diamond, Platinum, and Gold Partners OPN Diamond, Platinum, and Gold Partners are able to access the OUM method pack, training courses, and collateral from the OPN Portal at no additional cost: Go to the OPN Portal at partner.oracle.com. Select the "Partners (Login Required)" tab. Login. Select the "Engage with Oracle" tab. From the Engage with Oracle page, locate the "Applications" heading. From the Applications heading, locate and select the "Oracle Unified Method" link. From the Oracle Unified Method Knowledge Zone, select the "Implement" tab. From the Implement tab, select the "Tools and Resources" link. Locate and select the "Oracle Unified Method (OUM)" link. Previous Announcements Oracle Unified Method (OUM) Release 5.6 Oracle Unified Method (OUM) Release 5.5 Oracle Unified Method (OUM) Release 5.4 Oracle EMM Advantage Retired Retirement of Oracle EMM Advantage Planned for December 01, 2011

Search Results

Search found 14000 results on 560 pages for 'include guards'.

Page 185/560 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192 | Next Page >

- by user1843978

- by Security_Gate

- by Codenotguru

- by pinaldave

- by Bruce Eitman

- by Sylvain Duloutre

- by Greg Mally

- by jamiet

- by mbcrump

- by Manish Agrawal

- by Akshay Deep Lamba

- by Kenneth Noland

- by Kate Moss' Big Fan

- by BobPalmer

- by Dane Morgridge

- by kazimanzurrashid

- by user40630

- by Tori Wieldt

- by Bob Rhubart

- by Rob

- by fulop

- by user714714

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192 | Next Page >