Search Results

Search found 8976 results on 360 pages for 'optimal solutions'.

Page 187/360 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

• Linux software Raid 10 no superblock

  - by Shoshomiga

  I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2. I tried to reassemble manually with all the device names but it still would not bring up the raid 10 complaining about the missing superblock on sda2, and sda1 was also dropped from the raid 1. When I did examine on the raid10 it says that 1 of the initially failed drives is a spare, the other is spare rebuilding and sda2 is removed. It seems that sda decided to fail right when the system was vulnerable to it because when I boot up a live cd it spews out sda unrecoverable read failures. I have been trying to fix this all week but I'm not sure where to go with this now, I ordered more hard drives because I didn't have a complete backup, but its too late for that now and the only thing I could do is mirror all the hard drives onto the new ones (I'm not sure whether sda was mirrored without errors). On the internet I read that you can recover from this by recreating the array with the same options as when it was made, however because sda is failing I cant use it and I don't want to risk using its mirror instead, so I'm waiting to get another hard drive. I'm also not sure whether to include the out of sync drives or if I can actually use those instead to recover the array. Sorry if this is a mess to read but I've been trying to fix this all day and its late at night now, any thoughts on this would be greatly appreciated. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris

  Read the article

• How can I get started with BigData?

  - by ????? ????????

  I have a programming background, and I've done lots of database design and written lots of queries with Sql Server. I am really excited about looking at bigdata solutions. I know almost nothing about it. The way I want to learn is to sign up for a sandbox where I can try things out. questions Is there a sandbox where I can play around with hadoop? It does not have to be free. Would amazon EMR be the right path to go? What technologies should I be looking at to get started quickly? Is there a 'bigdata' dataset that is available to play with? Thank you so much for your guidance.

  Read the article

• Internet problems

  - by dan

  I've got problems on my freshly installed windows Xp machine. I cannot connect to the internet and I've tried various 'solutions' provided to me by the help and support center. Surprisingly none of them worked... Anyways, I've got 3 pc's next to me sharing a lan which is connected to the internet though a modem. The computer I use right now uses windows xp aswell and runs without any problems. I've tried everything on not working computer. I've ran the connection wizard several times, but it's not working :( Also I've very little experience with this version of windows, so I'm sorry if the solution is obvious.

  Read the article

• Kindle for PC - page loading problems

  - by Andrew Heath

  When viewing books in Kindle for PC, often going to the next page will change the line count at the bottom of the screen but not refresh the page view. Then, if you hit next again, you end up on the next next page (+2 rather than +1). This happens to me going backwards as well. Using arrow keys, or mouse clicks, or page down/up all creates this error. There doesn't seem to be any pattern to the occurrence other than "frequently". It happens on my Win7 64 bit and Win XP machines. I've only one Kindle book at the moment, PHP Object-Oriented Solutions by David Powers, so I suppose it could be a problem specific to that book. Does anyone else have this issue? It is extremely irritating to be constantly flipping back and forth just to get the page view to show the proper page.

  Read the article

• How do I catalog files on several external hard drives that I want to store off-line? OSX

  - by raudi

  My partner, an artist, has more than 10 external hardisks both USB and firewire and every 2-3 months a new one has to be added (She's working with videos and pictures) currently its 10TB and growing so too much for a affordable NAS. Right now the files are not indexed and I think can not be searched with spotlight because not all drives can be connected at the same time. So if she wants to search for a file, she has to guess which disk/disks (based mostly on the date) and then search several drives. Now I'm looking for a solution to index/catalog the drives, something like GentibusCD Cathy Disclib (all these solutions are unfortunately Windows only) Is there any software for OSX that will catalog all the hard drives, so she can search the catalog, find the files, and get the ID of the disk / disk name that has the content? Preferably something with a GUI so my partner can also use it easily Preferably with Thumbnails for pictures/videos (But even an equivalent to "tree /F /A" would be better than nothing)

  Read the article

• Is it possible to upgrade using the Windows Server 2012 evaluation?

  - by Cerebrate

  I've got a Windows Server 2008 Standard installation here that I'm trying to upgrade to Windows Server 2012 Server, using the evaluation version. (The scenario is essentially that I need to test the upgrade, and specifically the upgrade process, before we spend the money on going ahead with the actual upgrade.) When I try to upgrade, it fails with the message: "Windows Server 2008 Standard cannot be upgraded to Windows Server 2012 Standard Evaluation (Server with a GUI). You can choose to install a new... (etc., etc.)" Is this (non-upgradability) a known limitation of the evaluation version? (Unfortunately, I haven't found a clear answer on this point.) And if not, any thoughts on where else I might look for the problem and solutions to it?

  Read the article

• A complete tool for auditing and archiving emails would be helpful for the community?

  - by Renato Todorov

  Please, don't treat this like a discussion question, I'm looking for direct answers: Yes / No, because... I work on a financial company and I'm needing a tool for email archiving and auditing. The compliance sector is asking for it and I have to provide it. I've searched and found two solutions: MailStore (commercial, Windows only) and Enkive (open source, very poor UI and lack of features). I'm using Postfix as MTA and Courier for IMAP/POP access. I'm almost deciding to write it myself, I have the knowledge needed, but I'm wondering right now if it's worth to put (a lot) more hours to make it open source and user friendly. So my question is, have you ever had the same need? Would this be a helpful solution? Is there any other good tool that I haven't found? Thank you!

  Read the article

• How do I disable spell checking in IE 11 (Win 8.1)?

  - by ComFreek

  My issue is similar to the one mentioned here: Disable spell checking in Internet Explorer 10 (Windows 8) I am using Windows 8.1 Pro 64-bit What I've tried already: Deactivating the spelling options: From the following, borrowed screenshot from the old Windows 8 (my interface is German, therefore I couldn't create one myself), I have turned both options off and restarted IE. It's still "correcting" my texts. Searching for 'spelling correction' addons: The indicated option in the following borrowed screensnot does not exist on my PC. Is there any way of disabling it? I prefer a canonical solution if one is available. If not, I am also interested in registry hacks or other solutions.

  Read the article

• USB connection issue

  - by user1664417

  Currently Im facing an issue when Im trying to connect any usb flash drive to my pc. ok, below is what happens to me: 1) I can connect usb keyboard and mouse without any issue. 2) however when i connect usb flash drive, there are 2 situations that are occuring randomly a) there is no usb drive mount in my computer, when device manager is checked, it shows error code 10, but is shown in disk management. b) my computer will have usb drive mounted, but when I click on it, it is empty. on right click the properties, the disk space show 0. (there are files within the usb) what i have done is: 1) run CCleaner to repair the registry, restart and try, but still not working. 2) uninstall the drive in device manager, restart and try, but still not working. 3) tried the port that connects mouse and keyboard, but does not work. anyone who experienced these problems before please guide me. any suggestions or solutions would be greatly appreciated. Thanks, Tony

  Read the article

• Windows (7 & Vista) laptop monitor does not come back after closing lid

  - by Scott Vercuski

  I'm experiencing an issue with Windows Vista (and now Windows 7) with my laptop. When I close the laptop lid the monitor goes blank but will not come back on after I re-open the laptop. The screen stays blank and nothing that I do will get it to come back. The laptop is an HP DV9000 series. Has anyone else ran into this issue? One of the solutions I've seen online is to go into the device manager and replace the lid driver with something nonsensical (the website suggested pointing the driver at the sound recorder). This does solve the problem by disabling the lid but doesn't really resolve the root issue. I'm asking if anyone has any method I can use to debug what's going on. How do I tell if it is an operating system issue vs. a malfunction within the lid itself. I'd actually like the lid to function as it's meant to. Thank you!

  Read the article

• Windows Server 2008 R2 Firewall - Interface specific rules

  - by Mehmet Ergut

  I'm trying to define per interface rules, much like it was in Server 2003. We will be replacing our old 2003 server with a new 2008 R2 server. The server runs IIS and SQL Server. It's a dedicated server at the hosting company. We use a OpenVPN connection from the office to access SQL server, RDesktop, FTP and other administrative services. Only http and ssh is listening on the public interface. On the old server running 2003, I was able to define global rules for http and ssh, and allow other services only on the vpn interface. I can't find a way to do the same on 2008 R2. I understand that there is the Network Location Awareness service, firewall rules are applied according to the current network location. But I don't understand the purpose of this on a server. The only close solution I found is to set the scope on the firewall rule and restrict remote ip addresses to the private subnet of the office. But the ports will still be listening on the public interface. So how can I restrict a firewall rule to the connections coming from the vpn interface ? A note on this page states that scoping a rule to an interface does not exist anymore: In earlier versions of Windows, many of these command accepted a parameter called interface. This parameter is not supported in the firewall context in Windows Vista or later versions of Windows. I can't believe that they simply decided to remove a core firewall functionality that every firewall has. There must be a way to restrict a rule to an interface. Any ideas ? I'm still unable to find an adequate solution to my problem. So for now, my workaround is this: Administrative services listen on VPN IP address Firewall rules restrict the scope to the local IP address of VPN Public services listen on all interfaces, no scope restriction on firewall rules This is not optimal, if I change the IP address of the VPN, I need to edit the firewall rules too. It won't be the case if the rules were bound to the interface.

  Read the article

• Toshiba satellite u400 hardware buttons, which software?

  - by Kugel

  I've recently intalled Windows 7 64bit onto my Toshiba U400 laptop. I went over to toshiba support-download-drivers page and downloaded every driver that was missing. I chose not to download bloated stuff, only the drivers. Win7 has much better control over hardware buttons out of the box then I had before. But there is one thing that annoys me. I have hardware button on the laptom that is supposed to switch LEDs on/off. Windows 7 turns my sound on/off instead. The second minor thing is, when I turn off sound by pressing Fn+Esc (or light off button;-), the sound is off, however any slight touch with volume wheel turns it right back on! This is something that Ubuntu does also out of the box. I wonder what's the logic behind this. Any lightweight solutions to these out there? Thank you

  Read the article

• Remote Desktop Software - TeamViewer comparison?

  - by Martin

  Preliminary Note: After reading what I wrote below, I would like to stress that this ain't a TeamViewer ad. It's just that all other tools that I checkked online seem to miss one feature or the other. :-) OK, so I'm currently trying to get a picture of available solutions for remote desktop software. I have found (through personal usage) that TeamViewer pretty much ticks all boxes that I personally would want from any remoting tool. (Specifically it's setup is amazingly trivial.) It supports a wide range of platforms and it's even free for private use, so I'm really quite OK with it. I would be interested if anyone knows of other tools that ticks as many boxes as TeamViewer seems to do.

  Read the article

• Windows Proxy Server advice

  - by Scott

  I have a webserver that currently has about 10 IP addresses. I have various clients that require a proxy server to route their internal traffic through. The load is not that great, so I'd like to have this ONE server act as a proxy server for 10 different clients, each client having their own unique IP on the server. The hardware is already setup, but I'm wondering what software solutions you guys recommend? I've looked at WinGate, Squid-Proxy, etc...but am pretty green with this. Maybe there's even a way to have Windows do this natively? I'm running Windows Server 2008, 32 bit.

  Read the article

• SAN/NAS with high availability?

  - by netvope

  I have two servers that I plan to use for storage. Each of them has a few SATA disks directly attached. I want the storage to be available even if one of the storage servers is down (preferably the clients wouldn't even notice that the fail-over, although I'm not sure if this is possible). The clients may access the storage via NFS and samba, but this is not a must; I could use something else if needed. I found this guide, Installing and Configuring Openfiler with DRBD and Heartbeat, which apparently does the thing I want. It relies on three components, Openfiler, DRBD, and Heartbeat, and all three of them need to be configured separately. I'm wondering are there simpler solutions? Is using DRBD+Heartbeat the best practice for a situation like mine? I'm also interested to know if there are alternatives that don't depend on DRBD.

  Read the article

• Why does Snow Leopard report incorrect battery levels for Bluetooth input devices after switching them to Apple rechargeable batteries?

  - by GeneQ

  I have a Magic Trackpad, Magic Mouse and the Apple Wireless keyboard. They work fine. Two days ago, doing my part for the environment, I changed all their batteries to Apple rechargeable batteries. Today I noticed that the battery level meter for all three devices report the wrong battery level. The trackpad reports 93% charge, the keyboard 75% charge and the mouse 65% charge. This can't be right; these are fully charged new batteries. They can't possible drop that much within 48 hours. Has anyone else encountered this problem? And are there any solutions?

  Read the article

• Backing up a Linux VPS with RSync to Vista

  - by Frank

  I've been working to setup a Linux VPS to host a couple of Wordpress sites and eventually a Mercurial server. I've setup one site and things have gone well. However, before I start moving other things to the VPS, I need to setup a backup solution. My provider, Linode, suggest RSync (among a couple of other options) to do backups. I've seen a few posts on this site that suggests other backup solutions including going to the Amazon Cloud but that costs money and the VPS is all the money I want to spend on this for the time being. So, to help solve that I want to have my backup computer be my home desktop computer. Assuming I'm using RSync, is it possible to use my Vista based home computer to become the destination for the backup? And if it is possible, what type of command or connection would I need to configure on the vista machine? Any insight would be helpful. It's probably obvious, but I've never used RSync.

  Read the article

• How to make a quiet laptop?

  - by psihodelia

  Most modern laptops have very noisy fans. I am looking for a quiet laptop or a small stationary computer which has all its hardware built in a display. Most tasks will be PDF/docs processing, real-time audio processing, web-surfing and Skype video chats. Certainly, there is no any fan-less model today; but maybe some of the existed laptops do not switch on their fans so often or implement different solutions? For example, an iPad has no fan at all and it is fast enough for my needs, but it has no normal operating system, so I can't use it for anything but audio chats and web-surfing. Or maybe I can buy a laptop and tweak it to make it absolutely noiseless? Can you recommend any solution please?

  Read the article

• Mercurial changeset hook problem when auto updating. Server permissions maybe??

  - by Gary Willoughby

  I am using Mercurial SCM over a LAN using a normal shared folder instead of http and i'm having a problem getting the auto update hook to run. I have entered this hook as detailed here: http://mercurial.selenic.com/wiki/FAQ#FAQ.2BAC8-CommonProblems.Any_way_to_.27hg_push.27_and_have_an_automatic_.27hg_update.27_on_the_remote_server.3F This installs the hook, but when i push something to the remote repo i get an error: added 1 changesets with 1 changes to 1 files running hook changegroup: hg update >&2 warning: changegroup hook exited with status -1 There is a stackoverflow question similar to this here: http://stackoverflow.com/questions/2885246/mercurial-auto-update-problem but it offers no solutions other than it may be a permissions error somewhere. Has anyone else had this problem and can anyone else shed any more light on this or give me a heads up on where to start fixing this? Thanks.

  Read the article

• Visual feedback indicating selected sender address for new compositions in Entourage?

  - by Stew

  I send emails from two addresses using a single Entourage 12.2.4 client. One of them is a personal work account and one is an administrative account. It's very easy to send email from the wrong address, and this causes fairly significant problems when it happens. Do you have any solutions that would make it more obvious which email address is currently selected as the "From:" address in the composition? Different icons or some sort of color-coding scheme seem like useful ideas, though perhaps too much to expect of the lowly Entourage... Thanks!

  Read the article

• Corrupt Vista Account - With a twist

  - by oldSkool-Soldier

  I have a Windows Vista system whose profile seems to have been corrupted. Many solutions seem to indicate that you create another admin account, log in as that account, and delete the offending profile information for the account that is corrupted. Here's the twist: There are two accounts on this System - 1. Administrator Account 2. Standard Account. It's the Administrator Account which has become corrupted. If you attempted to do any user managment / attempt to create a new account under the 'Standard Account', UAC prompts for a user/pass. It has the admin account come up by default, and asking for a password (of which, there is none). When you click 'OK' - nothing happens (no doubt due to the fact that the account is corrupted, so it can't verify who or what is trying to allow the administrative privilage). Can anyone think of a way of fixing this account, or creating another administrator account to resolve this issue? Many thanks in advance.

  Read the article

• Searching Netapp Network Share in Windows 7

  - by user121270

  Windows 7 famously does not do what its predecessor, Windows XP, did very well, index and search network drives! Sometimes, the logic of MS isd absolutely baffling. That siad, I am trying to find some solution to the issue, which is made more complicated by the fact that we are using a Netapp FAS 2020 as a CIFS fileserver. I know some of the solutions to the Windows 7 search index issue revolve around having a Search Service installed on a Windows 2008 server and then adding that server sahre to the library on the Windows 7 workstation. Is it possible to accomplish this in any way with a CIFS share on a Netapp filer?

  Read the article

• Tracking costs within one AWS account

  - by caius howcroft

  I have what I'm sure is a very common problem. Our company has many projects and groups working for different clients. We do a lot of our development work in the cloud and deploy our solutions there. We have a VPC set up that isolates projects from each other in their own subnet and that VPC is getting a hardware VPN connection back to HQ. We need to keep track of the cost run up by every project. The way I currently implement this is by providing my own tools for starting and stopping instances which log which user (and thus which project) to bill the instance too. This works okay for BoxUsage costs but not for other costs. I could create a separate account for each project and use consolidated billing, this I think would allow me to pay once but track costs per "project", but I would then not be able to share common resources (like bring account B's running instances inside the same VPC). Does anyone have any suggestions? Cheers C

  Read the article

• Another "Trouble copying music files from HD to 16GB thumb drive"

  - by Ron

  I have a brand new HP Quad Core - 6GB Ram - running 64-bit Windows 7. Running Norton Internet 2010. I try copying music files from HD to 16 GB thumbdrive and get blue screen after a few files have transfered over to thumbdrive. Computer blinks once and boom - blue screen and then reboots. This is really aggravating. I stopped anti-virus, pulled other USB attached devices - still does same thing. Any solutions out there?

  Read the article

• Azure VM : Connection refused by host

  - by Simon Kérouack

  I recently stopped a subscription with 14 VMs in it and restarted it a few days later. Now all my VMs are working just fine at the exception of 6 used for MongoDB. They respond to ping and so they show as online in the azure dashboard but they do not answer to anything else. I tried (from different locations, in and out of the azure cloud) ssh : connect to host * port *: Connection refused telnet : Unable to connect to remote host: Connection refused mongo : exception: connect failed The ports for ssh and mongo are opened in azure. I tried restarting the VMs a few times trough the azure dashboard, they seem to restart successfully but still refuse all connections. I already looked for similar issues and the best solutions I found was to wait... the issue has been happening for 7 days and waiting is no more an option.

  Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >