Search Results

Search found 4691 results on 188 pages for 'ran biron'.

Page 188/188 | < Previous Page | 184 185 186 187 188 

• unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

  - by jon

  I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

  Read the article

• PC hangs and reboots from time to time

  - by Bevor

  Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

  Read the article

• Logging Into a site that uses Live.com authentication with C#

  - by Josh

  I've been trying to automate a log in to a website I frequent, www.bungie.net. The site is associated with Microsoft and Xbox Live, and as such makes uses of the Windows Live ID API when people log in to their site. I am relatively new to creating web spiders/robots, and I worry that I'm misunderstanding some of the most basic concepts. I've simulated logins to other sites such as Facebook and Gmail, but live.com has given me nothing but trouble. Anyways, I've been using Wireshark and the Firefox addon Tamper Data to try and figure out what I need to post, and what cookies I need to include with my requests. As far as I know these are the steps one must follow to log in to this site. 1. Visit https: //login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1268167141&rver=5.5.4177.0&wp=LBI&wreply=http:%2F%2Fwww.bungie.net%2FDefault.aspx&id=42917 2. Recieve the cookies MSPRequ and MSPOK. 3. Post the values from the form ID "PPSX", the values from the form ID "PPFT", your username, your password all to a changing URL similar to: https: //login.live.com/ppsecure/post.srf?wa=wsignin1.0&rpsnv=11&ct= (there are a few numbers that change at the end of that URL) 4. Live.com returns the user a page with more hidden forms to post. The client then posts the values from the form "ANON", the value from the form "ANONExp" and the values from the form "t" to the URL: http ://www.bung ie.net/Default.aspx?wa=wsignin1.0 5. After posting that data, the user is returned a variety of cookies the most important of which is "BNGAuth" which is the log in cookie for the site. Where I am having trouble is on fifth step, but that doesn't neccesarily mean I've done all the other steps correctly. I post the data from "ANON", "ANONExp" and "t" but instead of being returned a BNGAuth cookie, I'm returned a cookie named "RSPMaybe" and redirected to the home page. When I review the Wireshark log, I noticed something that instantly stood out to me as different between the log when I logged in with Firefox and when my program ran. It could be nothing but I'll include the picture here for you to review. I'm being returned an HTTP packet from the site before I post the data in the fourth step. I'm not sure how this is happening, but it must be a side effect from something I'm doing wrong in the HTTPS steps. ![alt text][1] http://img391.imageshack.us/img391/6049/31394881.gif using System; using System.Collections.Generic; using System.Collections.Specialized; using System.Text; using System.Net; using System.IO; using System.IO.Compression; using System.Security.Cryptography; using System.Security.Cryptography.X509Certificates; using System.Web; namespace SpiderFromScratch { class Program { static void Main(string[] args) { CookieContainer cookies = new CookieContainer(); Uri url = new Uri("https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1268167141&rver=5.5.4177.0&wp=LBI&wreply=http:%2F%2Fwww.bungie.net%2FDefault.aspx&id=42917"); HttpWebRequest http = (HttpWebRequest)HttpWebRequest.Create(url); http.Timeout = 30000; http.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)"; http.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"; http.Headers.Add("Accept-Language", "en-us,en;q=0.5"); http.Headers.Add("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); http.Headers.Add("Keep-Alive", "300"); http.Referer = "http://www.bungie.net/"; http.ContentType = "application/x-www-form-urlencoded"; http.CookieContainer = new CookieContainer(); http.Method = WebRequestMethods.Http.Get; HttpWebResponse response = (HttpWebResponse)http.GetResponse(); StreamReader readStream = new StreamReader(response.GetResponseStream()); string HTML = readStream.ReadToEnd(); readStream.Close(); //gets the cookies (they are set in the eighth header) string[] strCookies = response.Headers.GetValues(8); response.Close(); string name, value; Cookie manualCookie; for (int i = 0; i < strCookies.Length; i++) { name = strCookies[i].Substring(0, strCookies[i].IndexOf("=")); value = strCookies[i].Substring(strCookies[i].IndexOf("=") + 1, strCookies[i].IndexOf(";") - strCookies[i].IndexOf("=") - 1); manualCookie = new Cookie(name, "\"" + value + "\""); Uri manualURL = new Uri("http://login.live.com"); http.CookieContainer.Add(manualURL, manualCookie); } //stores the cookies to be used later cookies = http.CookieContainer; //Get the PPSX value string PPSX = HTML.Remove(0, HTML.IndexOf("PPSX")); PPSX = PPSX.Remove(0, PPSX.IndexOf("value") + 7); PPSX = PPSX.Substring(0, PPSX.IndexOf("\"")); //Get this random PPFT value string PPFT = HTML.Remove(0, HTML.IndexOf("PPFT")); PPFT = PPFT.Remove(0, PPFT.IndexOf("value") + 7); PPFT = PPFT.Substring(0, PPFT.IndexOf("\"")); //Get the random URL you POST to string POSTURL = HTML.Remove(0, HTML.IndexOf("https://login.live.com/ppsecure/post.srf?wa=wsignin1.0&rpsnv=11&ct=")); POSTURL = POSTURL.Substring(0, POSTURL.IndexOf("\"")); //POST with cookies http = (HttpWebRequest)HttpWebRequest.Create(POSTURL); http.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)"; http.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"; http.Headers.Add("Accept-Language", "en-us,en;q=0.5"); http.Headers.Add("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); http.Headers.Add("Keep-Alive", "300"); http.CookieContainer = cookies; http.Referer = "https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1268158321&rver=5.5.4177.0&wp=LBI&wreply=http:%2F%2Fwww.bungie.net%2FDefault.aspx&id=42917"; http.ContentType = "application/x-www-form-urlencoded"; http.Method = WebRequestMethods.Http.Post; Stream ostream = http.GetRequestStream(); //used to convert strings into bytes System.Text.ASCIIEncoding encoding = new System.Text.ASCIIEncoding(); //Post information byte[] buffer = encoding.GetBytes("PPSX=" + PPSX +"&PwdPad=IfYouAreReadingThisYouHaveTooMuc&login=YOUREMAILGOESHERE&passwd=YOURWORDGOESHERE" + "&LoginOptions=2&PPFT=" + PPFT); ostream.Write(buffer, 0, buffer.Length); ostream.Close(); HttpWebResponse response2 = (HttpWebResponse)http.GetResponse(); readStream = new StreamReader(response2.GetResponseStream()); HTML = readStream.ReadToEnd(); response2.Close(); ostream.Dispose(); foreach (Cookie cookie in response2.Cookies) { Console.WriteLine(cookie.Name + ": "); Console.WriteLine(cookie.Value); Console.WriteLine(cookie.Expires); Console.WriteLine(); } //SET POSTURL value string POSTANON = "http://www.bungie.net/Default.aspx?wa=wsignin1.0"; //Get the ANON value string ANON = HTML.Remove(0, HTML.IndexOf("ANON")); ANON = ANON.Remove(0, ANON.IndexOf("value") + 7); ANON = ANON.Substring(0, ANON.IndexOf("\"")); ANON = HttpUtility.UrlEncode(ANON); //Get the ANONExp value string ANONExp = HTML.Remove(0, HTML.IndexOf("ANONExp")); ANONExp = ANONExp.Remove(0, ANONExp.IndexOf("value") + 7); ANONExp = ANONExp.Substring(0, ANONExp.IndexOf("\"")); ANONExp = HttpUtility.UrlEncode(ANONExp); //Get the t value string t = HTML.Remove(0, HTML.IndexOf("id=\"t\"")); t = t.Remove(0, t.IndexOf("value") + 7); t = t.Substring(0, t.IndexOf("\"")); t = HttpUtility.UrlEncode(t); //POST the Info and Accept the Bungie Cookies http = (HttpWebRequest)HttpWebRequest.Create(POSTANON); http.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)"; http.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"; http.Headers.Add("Accept-Language", "en-us,en;q=0.5"); http.Headers.Add("Accept-Encoding", "gzip,deflate"); http.Headers.Add("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); http.Headers.Add("Keep-Alive", "115"); http.CookieContainer = new CookieContainer(); http.ContentType = "application/x-www-form-urlencoded"; http.Method = WebRequestMethods.Http.Post; http.Expect = null; ostream = http.GetRequestStream(); int test = ANON.Length; int test1 = ANONExp.Length; int test2 = t.Length; buffer = encoding.GetBytes("ANON=" + ANON +"&ANONExp=" + ANONExp + "&t=" + t); ostream.Write(buffer, 0, buffer.Length); ostream.Close(); //Here lies the problem, I am not returned the correct cookies. HttpWebResponse response3 = (HttpWebResponse)http.GetResponse(); GZipStream gzip = new GZipStream(response3.GetResponseStream(), CompressionMode.Decompress); readStream = new StreamReader(gzip); HTML = readStream.ReadToEnd(); //gets both cookies string[] strCookies2 = response3.Headers.GetValues(11); response3.Close(); } } } This has given me problems and I've put many hours into learning about HTTP protocols so any help would be appreciated. If there is an article detailing a similar log in to live.com feel free to point the way. I've been looking far and wide for any articles with working solutions. If I could be clearer, feel free to ask as this is my first time using Stack Overflow. Cheers, --Josh

  Read the article

• RuntimeError: maximum recursion depth exceeded while calling a Python object

  - by Bilal Basharat

  this error arises when i try to run the following test case which is written in models.py of my django app named 'administration' : from django.test import Client, TestCase from django.core import mail class ClientTest( TestCase ): fixtures = [ 'testdata.json' ] def test_get_register( self ): response = self.client.get( '/accounts/register/', {} ) self.assertEqual( response.status_code, 200 ) the error arises at this line specifically: response = self.client.get( '/accounts/register/', {} ) my django version is 1.2.1 and python 2.6 and satchmo version is 0.9.2-pre hg-unknown. I code in windows platform(xp sp2). The command to run test case is: python manage.py test administration the complete error log is as follow: site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 121, in by_host site = by_host(host=host[4:], id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 124, in by_host site = by_host(host = 'www.%s' % host, id_only=id_only) File "build\bdist.win32\egg\threaded_multihost\sites.py", line 101, in by_host site = Site.objects.get(domain=host) File "C:\django\django\db\models\manager.py", line 132, in get return self.get_query_set().get(*args, **kwargs) File "C:\django\django\db\models\query.py", line 336, in get num = len(clone) File "C:\django\django\db\models\query.py", line 81, in __len__ self._result_cache = list(self.iterator()) File "C:\django\django\db\models\query.py", line 269, in iterator for row in compiler.results_iter(): File "C:\django\django\db\models\sql\compiler.py", line 672, in results_iter for rows in self.execute_sql(MULTI): File "C:\django\django\db\models\sql\compiler.py", line 717, in execute_sql sql, params = self.as_sql() File "C:\django\django\db\models\sql\compiler.py", line 65, in as_sql where, w_params = self.query.where.as_sql(qn=qn, connection=self.connection) File "C:\django\django\db\models\sql\where.py", line 91, in as_sql sql, params = child.as_sql(qn=qn, connection=connection) File "C:\django\django\db\models\sql\where.py", line 94, in as_sql sql, params = self.make_atom(child, qn, connection) File "C:\django\django\db\models\sql\where.py", line 141, in make_atom lvalue, params = lvalue.process(lookup_type, params_or_value, connection) File "C:\django\django\db\models\sql\where.py", line 312, in process connection=connection, prepared=True) File "C:\django\django\db\models\fields\subclassing.py", line 53, in inner return func(*args, **kwargs) File "C:\django\django\db\models\fields\subclassing.py", line 53, in inner return func(*args, **kwargs) File "C:\django\django\db\models\fields\__init__.py", line 323, in get_db_prep _lookup return [self.get_db_prep_value(value, connection=connection, prepared=prepar ed)] File "C:\django\django\db\models\fields\subclassing.py", line 53, in inner return func(*args, **kwargs) File "C:\django\django\db\models\fields\subclassing.py", line 53, in inner return func(*args, **kwargs) RuntimeError: maximum recursion depth exceeded while calling a Python object ---------------------------------------------------------------------- Ran 7 tests in 48.453s FAILED (errors=1) Destroying test database 'default'...

  Read the article

• Logging Into a site that uses Live.com authentication

  - by Josh

  I've been trying to automate a log in to a website I frequent, www.bungie.net. The site is associated with Microsoft and Xbox Live, and as such makes uses of the Windows Live ID API when people log in to their site. I am relatively new to creating web spiders/robots, and I worry that I'm misunderstanding some of the most basic concepts. I've simulated logins to other sites such as Facebook and Gmail, but live.com has given me nothing but trouble. Anyways, I've been using Wireshark and the Firefox addon Tamper Data to try and figure out what I need to post, and what cookies I need to include with my requests. As far as I know these are the steps one must follow to log in to this site. 1. Visit https: //login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1268167141&rver=5.5.4177.0&wp=LBI&wreply=http:%2F%2Fwww.bungie.net%2FDefault.aspx&id=42917 2. Recieve the cookies MSPRequ and MSPOK. 3. Post the values from the form ID "PPSX", the values from the form ID "PPFT", your username, your password all to a changing URL similar to: https: //login.live.com/ppsecure/post.srf?wa=wsignin1.0&rpsnv=11&ct= (there are a few numbers that change at the end of that URL) 4. Live.com returns the user a page with more hidden forms to post. The client then posts the values from the form "ANON", the value from the form "ANONExp" and the values from the form "t" to the URL: http ://www.bung ie.net/Default.aspx?wa=wsignin1.0 5. After posting that data, the user is returned a variety of cookies the most important of which is "BNGAuth" which is the log in cookie for the site. Where I am having trouble is on fifth step, but that doesn't neccesarily mean I've done all the other steps correctly. I post the data from "ANON", "ANONExp" and "t" but instead of being returned a BNGAuth cookie, I'm returned a cookie named "RSPMaybe" and redirected to the home page. When I review the Wireshark log, I noticed something that instantly stood out to me as different between the log when I logged in with Firefox and when my program ran. It could be nothing but I'll include the picture here for you to review. I'm being returned an HTTP packet from the site before I post the data in the fourth step. I'm not sure how this is happening, but it must be a side effect from something I'm doing wrong in the HTTPS steps. using System; using System.Collections.Generic; using System.Collections.Specialized; using System.Text; using System.Net; using System.IO; using System.IO.Compression; using System.Security.Cryptography; using System.Security.Cryptography.X509Certificates; using System.Web; namespace SpiderFromScratch { class Program { static void Main(string[] args) { CookieContainer cookies = new CookieContainer(); Uri url = new Uri("https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1268167141&rver=5.5.4177.0&wp=LBI&wreply=http:%2F%2Fwww.bungie.net%2FDefault.aspx&id=42917"); HttpWebRequest http = (HttpWebRequest)HttpWebRequest.Create(url); http.Timeout = 30000; http.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)"; http.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"; http.Headers.Add("Accept-Language", "en-us,en;q=0.5"); http.Headers.Add("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); http.Headers.Add("Keep-Alive", "300"); http.Referer = "http://www.bungie.net/"; http.ContentType = "application/x-www-form-urlencoded"; http.CookieContainer = new CookieContainer(); http.Method = WebRequestMethods.Http.Get; HttpWebResponse response = (HttpWebResponse)http.GetResponse(); StreamReader readStream = new StreamReader(response.GetResponseStream()); string HTML = readStream.ReadToEnd(); readStream.Close(); //gets the cookies (they are set in the eighth header) string[] strCookies = response.Headers.GetValues(8); response.Close(); string name, value; Cookie manualCookie; for (int i = 0; i < strCookies.Length; i++) { name = strCookies[i].Substring(0, strCookies[i].IndexOf("=")); value = strCookies[i].Substring(strCookies[i].IndexOf("=") + 1, strCookies[i].IndexOf(";") - strCookies[i].IndexOf("=") - 1); manualCookie = new Cookie(name, "\"" + value + "\""); Uri manualURL = new Uri("http://login.live.com"); http.CookieContainer.Add(manualURL, manualCookie); } //stores the cookies to be used later cookies = http.CookieContainer; //Get the PPSX value string PPSX = HTML.Remove(0, HTML.IndexOf("PPSX")); PPSX = PPSX.Remove(0, PPSX.IndexOf("value") + 7); PPSX = PPSX.Substring(0, PPSX.IndexOf("\"")); //Get this random PPFT value string PPFT = HTML.Remove(0, HTML.IndexOf("PPFT")); PPFT = PPFT.Remove(0, PPFT.IndexOf("value") + 7); PPFT = PPFT.Substring(0, PPFT.IndexOf("\"")); //Get the random URL you POST to string POSTURL = HTML.Remove(0, HTML.IndexOf("https://login.live.com/ppsecure/post.srf?wa=wsignin1.0&rpsnv=11&ct=")); POSTURL = POSTURL.Substring(0, POSTURL.IndexOf("\"")); //POST with cookies http = (HttpWebRequest)HttpWebRequest.Create(POSTURL); http.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)"; http.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"; http.Headers.Add("Accept-Language", "en-us,en;q=0.5"); http.Headers.Add("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); http.Headers.Add("Keep-Alive", "300"); http.CookieContainer = cookies; http.Referer = "https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1268158321&rver=5.5.4177.0&wp=LBI&wreply=http:%2F%2Fwww.bungie.net%2FDefault.aspx&id=42917"; http.ContentType = "application/x-www-form-urlencoded"; http.Method = WebRequestMethods.Http.Post; Stream ostream = http.GetRequestStream(); //used to convert strings into bytes System.Text.ASCIIEncoding encoding = new System.Text.ASCIIEncoding(); //Post information byte[] buffer = encoding.GetBytes("PPSX=" + PPSX +"&PwdPad=IfYouAreReadingThisYouHaveTooMuc&login=YOUREMAILGOESHERE&passwd=YOURWORDGOESHERE" + "&LoginOptions=2&PPFT=" + PPFT); ostream.Write(buffer, 0, buffer.Length); ostream.Close(); HttpWebResponse response2 = (HttpWebResponse)http.GetResponse(); readStream = new StreamReader(response2.GetResponseStream()); HTML = readStream.ReadToEnd(); response2.Close(); ostream.Dispose(); foreach (Cookie cookie in response2.Cookies) { Console.WriteLine(cookie.Name + ": "); Console.WriteLine(cookie.Value); Console.WriteLine(cookie.Expires); Console.WriteLine(); } //SET POSTURL value string POSTANON = "http://www.bungie.net/Default.aspx?wa=wsignin1.0"; //Get the ANON value string ANON = HTML.Remove(0, HTML.IndexOf("ANON")); ANON = ANON.Remove(0, ANON.IndexOf("value") + 7); ANON = ANON.Substring(0, ANON.IndexOf("\"")); ANON = HttpUtility.UrlEncode(ANON); //Get the ANONExp value string ANONExp = HTML.Remove(0, HTML.IndexOf("ANONExp")); ANONExp = ANONExp.Remove(0, ANONExp.IndexOf("value") + 7); ANONExp = ANONExp.Substring(0, ANONExp.IndexOf("\"")); ANONExp = HttpUtility.UrlEncode(ANONExp); //Get the t value string t = HTML.Remove(0, HTML.IndexOf("id=\"t\"")); t = t.Remove(0, t.IndexOf("value") + 7); t = t.Substring(0, t.IndexOf("\"")); t = HttpUtility.UrlEncode(t); //POST the Info and Accept the Bungie Cookies http = (HttpWebRequest)HttpWebRequest.Create(POSTANON); http.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)"; http.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"; http.Headers.Add("Accept-Language", "en-us,en;q=0.5"); http.Headers.Add("Accept-Encoding", "gzip,deflate"); http.Headers.Add("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); http.Headers.Add("Keep-Alive", "115"); http.CookieContainer = new CookieContainer(); http.ContentType = "application/x-www-form-urlencoded"; http.Method = WebRequestMethods.Http.Post; http.Expect = null; ostream = http.GetRequestStream(); int test = ANON.Length; int test1 = ANONExp.Length; int test2 = t.Length; buffer = encoding.GetBytes("ANON=" + ANON +"&ANONExp=" + ANONExp + "&t=" + t); ostream.Write(buffer, 0, buffer.Length); ostream.Close(); //Here lies the problem, I am not returned the correct cookies. HttpWebResponse response3 = (HttpWebResponse)http.GetResponse(); GZipStream gzip = new GZipStream(response3.GetResponseStream(), CompressionMode.Decompress); readStream = new StreamReader(gzip); HTML = readStream.ReadToEnd(); //gets both cookies string[] strCookies2 = response3.Headers.GetValues(11); response3.Close(); } } } This has given me problems and I've put many hours into learning about HTTP protocols so any help would be appreciated. If there is an article detailing a similar log in to live.com feel free to point the way. I've been looking far and wide for any articles with working solutions. If I could be clearer, feel free to ask as this is my first time using Stack Overflow.

  Read the article

• XSLT 1.0 help with recursion logic

  - by DashaLuna

  Hello guys, I'm having troubles with the logic and would apprecite any help/tips. I have <Deposits> elements and <Receipts> elements. However there isn't any identification what receipt was paid toward what deposit. I am trying to update the <Deposits> elements with the following attributes: @DueAmont - the amount that is still due to pay @Status - whether it's paid, outstanding (partly paid) or due @ReceiptDate - the latest receipt's date that was paid towards this deposit Every deposit could be paid with one or more receipts. It also could happen, that 1 receipt could cover one or more deposits. For example. If there are 3 deposits: 500 100 450 That are paid with the following receipts: 200 100 250 I want to get the following info: Deposit 1 is fully paid (status=paid, dueAmount=0, receiptNum=3. Deposit 2 is partly paid (status=outstanding, dueAmount=50, receiptNum=3. Deposit 3 is not paid (status=due, dueAmount=450, receiptNum=NAN. I've added comments in the code explaining what I'm trying to do. I am staring at this code for the 3rd day now non stop - can't see what I'm doing wrong. Please could anyone help me with it? :) Thanks! Set up: $deposits - All the available deposits $receiptsAsc - All the available receipts sorted by their @ActionDate Code: <!-- Accumulate all the deposits with @Status, @DueAmount and @ReceiptDate attributes Provide all deposits, receipts and start with 1st receipt --> <xsl:variable name="depositsClassified"> <xsl:call-template name="classifyDeposits"> <xsl:with-param name="depositsAll" select="$deposits"/> <xsl:with-param name="receiptsAll" select="$receiptsAsc"/> <xsl:with-param name="receiptCount" select="'1'"/> </xsl:call-template> </xsl:variable> <!-- Recursive function to associate deposits' total amounts with overall receipts paid to determine whether a deposit is due, outstanding or paid. Also determine what's the due amount and latest receipt towards the deposit for each deposit --> <xsl:template name="classifyDeposits"> <xsl:param name="depositsAll"/> <xsl:param name="receiptsAll"/> <xsl:param name="receiptCount"/> <!-- If there are deposits to proceed --> <xsl:if test="$depositsAll"> <!-- Get the 1st deposit --> <xsl:variable name="deposit" select="$depositsAll[1]"/> <!-- Calculate the sum of all receipts up to and including currenly considered --> <xsl:variable name="receiptSum"> <xsl:choose> <xsl:when test="$receiptsAll"> <xsl:value-of select="sum($receiptsAll[position() &lt;= $receiptCount]/@ReceiptAmount)"/> </xsl:when> <xsl:otherwise>0</xsl:otherwise> </xsl:choose> </xsl:variable> <!-- Difference between deposit amount and sum of the receipts calculated above --> <xsl:variable name="diff" select="$deposit/@DepositTotalAmount - $receiptSum"/> <xsl:choose> <!-- Deposit isn't paid fully and there are more receipts/payments exist. So consider the same deposit, but take next receipt into calculation as well --> <xsl:when test="($diff &gt; 0) and ($receiptCount &lt; count($receiptsAll))"> <xsl:call-template name="classifyDeposits"> <xsl:with-param name="depositsAll" select="$depositsAll"/> <xsl:with-param name="receiptsAll" select="$receiptsAll"/> <xsl:with-param name="receiptCount" select="$receiptCount + 1"/> </xsl:call-template> </xsl:when> <!-- Deposit is paid or we ran out of receipts --> <xsl:otherwise> <!-- process the deposit. Determine its status and then update corresponding attributes --> <xsl:apply-templates select="$deposit" mode="defineDeposit"> <xsl:with-param name="diff" select="$diff"/> <xsl:with-param name="receiptNum" select="$receiptCount"/> </xsl:apply-templates> <!-- Recursively call the template with the rest of deposits excluding the first. Before hand update the @ReceiptsAmount. For the receipts before current it is now 0, for the current is what left in the $diff, and simply copy over receipts after current one. --> <xsl:variable name="receiptsUpdatedRTF"> <xsl:for-each select="$receiptsAll"> <xsl:choose> <!-- these receipts was fully accounted for the current deposit. Make them 0 --> <xsl:when test="position() &lt; $receiptCount"> <xsl:copy> <xsl:copy-of select="./@*"/> <xsl:attribute name="ReceiptAmount">0</xsl:attribute> </xsl:copy> </xsl:when> <!-- this receipt was partly/fully(in case $diff=0) accounted for the current deposit. Make it whatever is in $diff --> <xsl:when test="position() = $receiptCount"> <xsl:copy> <xsl:copy-of select="./@*"/> <xsl:attribute name="ReceiptAmount"> <xsl:value-of select="format-number($diff, '#.00;#.00')"/> </xsl:attribute> </xsl:copy> </xsl:when> <!-- these receipts weren't yet considered - copy them over --> <xsl:otherwise> <xsl:copy-of select="."/> </xsl:otherwise> </xsl:choose> </xsl:for-each> </xsl:variable> <xsl:variable name="receiptsUpdated" select="msxsl:node-set($receiptsUpdatedRTF)/Receipts"/> <!-- Recursive call for the next deposit. Starting counting receipts from the current one. --> <xsl:call-template name="classifyDeposits"> <xsl:with-param name="depositsAll" select="$deposits[position() != 1]"/> <xsl:with-param name="receiptsAll" select="$receiptsUpdated"/> <xsl:with-param name="receiptCount" select="$receiptCount"/> </xsl:call-template> </xsl:otherwise> </xsl:choose> </xsl:if> </xsl:template> <!-- Determine deposit's status and due amount --> <xsl:template match="MultiDeposits" mode="defineDeposit"> <xsl:param name="diff"/> <xsl:param name="receiptNum"/> <xsl:choose> <xsl:when test="$diff &lt;= 0"> <xsl:apply-templates select="." mode="addAttrs"> <xsl:with-param name="status" select="'paid'"/> <xsl:with-param name="dueAmount" select="'0'"/> <xsl:with-param name="receiptNum" select="$receiptNum"/> </xsl:apply-templates> </xsl:when> <xsl:when test="$diff = ./@DepositTotalAmount"> <xsl:apply-templates select="." mode="addAttrs"> <xsl:with-param name="status" select="'due'"/> <xsl:with-param name="dueAmount" select="$diff"/> </xsl:apply-templates> </xsl:when> <xsl:when test="$diff &lt; ./@DepositTotalAmount"> <xsl:apply-templates select="." mode="addAttrs"> <xsl:with-param name="status" select="'outstanding'"/> <xsl:with-param name="dueAmount" select="$diff"/> <xsl:with-param name="receiptNum" select="$receiptNum"/> </xsl:apply-templates> </xsl:when> <xsl:otherwise/> </xsl:choose> </xsl:template> <!-- Add new attributes (@Status, @DueAmount and @ReceiptDate) to the deposit element --> <xsl:template match="MultiDeposits" mode="addAttrs"> <xsl:param name="status"/> <xsl:param name="dueAmount"/> <xsl:param name="receiptNum" select="''"/> <xsl:copy> <xsl:copy-of select="./@*"/> <xsl:attribute name="Status"><xsl:value-of select="$status"/></xsl:attribute> <xsl:attribute name="DueAmount"><xsl:value-of select="$dueAmount"/></xsl:attribute> <xsl:if test="$receiptNum != ''"> <xsl:attribute name="ReceiptDate"> <xsl:value-of select="$receiptsAsc[position() = $receiptNum]/@ActionDate"/> </xsl:attribute> </xsl:if> <xsl:copy-of select="./*"/> </xsl:copy> </xsl:template>

  Read the article

• Test-Driven Development Problem

  - by Zeck

  Hi guys, I'm newbie to Java EE 6 and i'm trying to develop very simple JAX-RS application. RESTfull web service working fine. However when I ran my test application, I got the following. What have I done wrong? Or am i forget any configuration? Of course i'm create a JNDI and i'm using Netbeans 6.8 IDE. In finally, thank you for any advise. My Entity: @Entity @Table(name = "BOOK") @NamedQueries({ @NamedQuery(name = "Book.findAll", query = "SELECT b FROM Book b"), @NamedQuery(name = "Book.findById", query = "SELECT b FROM Book b WHERE b.id = :id"), @NamedQuery(name = "Book.findByTitle", query = "SELECT b FROM Book b WHERE b.title = :title"), @NamedQuery(name = "Book.findByDescription", query = "SELECT b FROM Book b WHERE b.description = :description"), @NamedQuery(name = "Book.findByPrice", query = "SELECT b FROM Book b WHERE b.price = :price"), @NamedQuery(name = "Book.findByNumberofpage", query = "SELECT b FROM Book b WHERE b.numberofpage = :numberofpage")}) public class Book implements Serializable { private static final long serialVersionUID = 1L; @Id @Basic(optional = false) @Column(name = "ID") private Integer id; @Basic(optional = false) @Column(name = "TITLE") private String title; @Basic(optional = false) @Column(name = "DESCRIPTION") private String description; @Basic(optional = false) @Column(name = "PRICE") private double price; @Basic(optional = false) @Column(name = "NUMBEROFPAGE") private int numberofpage; public Book() { } public Book(Integer id) { this.id = id; } public Book(Integer id, String title, String description, double price, int numberofpage) { this.id = id; this.title = title; this.description = description; this.price = price; this.numberofpage = numberofpage; } public Integer getId() { return id; } public void setId(Integer id) { this.id = id; } public String getTitle() { return title; } public void setTitle(String title) { this.title = title; } public String getDescription() { return description; } public void setDescription(String description) { this.description = description; } public double getPrice() { return price; } public void setPrice(double price) { this.price = price; } public int getNumberofpage() { return numberofpage; } public void setNumberofpage(int numberofpage) { this.numberofpage = numberofpage; } @Override public int hashCode() { int hash = 0; hash += (id != null ? id.hashCode() : 0); return hash; } @Override public boolean equals(Object object) { // TODO: Warning - this method won't work in the case the id fields are not set if (!(object instanceof Book)) { return false; } Book other = (Book) object; if ((this.id == null && other.id != null) || (this.id != null && !this.id.equals(other.id))) { return false; } return true; } @Override public String toString() { return "com.entity.Book[id=" + id + "]"; } } My Junit test class: public class BookTest { private static EntityManager em; private static EntityManagerFactory emf; public BookTest() { } @BeforeClass public static void setUpClass() throws Exception { emf = Persistence.createEntityManagerFactory("E01R01PU"); em = emf.createEntityManager(); } @AfterClass public static void tearDownClass() throws Exception { em.close(); emf.close(); } @Test public void createBook() { Book book = new Book(); book.setId(1); book.setDescription("Mastering the Behavior Driven Development with Ruby on Rails"); book.setTitle("Mastering the BDD"); book.setPrice(25.9f); book.setNumberofpage(1029); em.persist(book); assertNotNull("ID should not be null", book.getId()); } } My persistence.xml jta-data-sourceBookstoreJNDI And exception is: May 7, 2009 11:10:37 AM org.hibernate.validator.util.Version INFO: Hibernate Validator bean-validator-3.0-JBoss-4.0.2 May 7, 2009 11:10:37 AM org.hibernate.validator.engine.resolver.DefaultTraversableResolver detectJPA INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver. [EL Info]: 2009-05-07 11:10:37.531--ServerSession(13671123)--EclipseLink, version: Eclipse Persistence Services - 2.0.0.v20091127-r5931 May 7, 2009 11:10:40 AM com.sun.enterprise.transaction.JavaEETransactionManagerSimplified initDelegates INFO: Using com.sun.enterprise.transaction.jts.JavaEETransactionManagerJTSDelegate as the delegate May 7, 2009 11:10:43 AM com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter SEVERE: rardeployment.class_not_found May 7, 2009 11:10:43 AM com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter SEVERE: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:104) at com.sun.enterprise.connectors.service.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:216) at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:352) at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:106) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.impl.SerialContext.getObjectInstance(SerialContext.java:472) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:437) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:569) at javax.naming.InitialContext.lookup(InitialContext.java:396) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:110) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:94) at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162) at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:584) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:228) at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:368) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:151) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:207) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:195) at com.entity.BookTest.setUpClass(BookTest.java:31) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44) at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15) at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41) at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:27) at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31) at org.junit.runners.ParentRunner.run(ParentRunner.java:220) at junit.framework.JUnit4TestAdapter.run(JUnit4TestAdapter.java:39) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:515) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:1031) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:888) Caused by: java.lang.ClassNotFoundException: com.sun.gjc.spi.ResourceAdapter at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:96) ... 32 more [EL Severe]: 2009-05-07 11:10:43.937--ServerSession(13671123)--Local Exception Stack: Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.0.v20091127-r5931): org.eclipse.persistence.exceptions.ValidationException Exception Description: Cannot acquire data source [BookstoreJNDI]. Internal Exception: javax.naming.NamingException: Lookup failed for 'BookstoreJNDI' in SerialContext ,orb'sInitialHost=localhost,orb'sInitialPort=3700 [Root exception is javax.naming.NamingException: Failed to look up ConnectorDescriptor from JNDI [Root exception is com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR]] at org.eclipse.persistence.exceptions.ValidationException.cannotAcquireDataSource(ValidationException.java:451) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:116) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:94) at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162) at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:584) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:228) at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:368) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:151) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:207) at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:195) at com.entity.BookTest.setUpClass(BookTest.java:31) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44) at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15) at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41) at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:27) at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31) at org.junit.runners.ParentRunner.run(ParentRunner.java:220) at junit.framework.JUnit4TestAdapter.run(JUnit4TestAdapter.java:39) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:515) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:1031) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:888) Caused by: javax.naming.NamingException: Lookup failed for 'BookstoreJNDI' in SerialContext ,orb'sInitialHost=localhost,orb'sInitialPort=3700 [Root exception is javax.naming.NamingException: Failed to look up ConnectorDescriptor from JNDI [Root exception is com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR]] at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:442) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:569) at javax.naming.InitialContext.lookup(InitialContext.java:396) at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:110) ... 23 more Caused by: javax.naming.NamingException: Failed to look up ConnectorDescriptor from JNDI [Root exception is com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR] at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:109) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at com.sun.enterprise.naming.impl.SerialContext.getObjectInstance(SerialContext.java:472) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:437) ... 26 more Caused by: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:104) at com.sun.enterprise.connectors.service.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:216) at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:352) at com.sun.enterprise.resource.naming.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:106) ... 29 more Caused by: java.lang.ClassNotFoundException: com.sun.gjc.spi.ResourceAdapter at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:96) ... 32 more Exception Description: Cannot acquire data source [BookstoreJNDI]. Internal Exception: javax.naming.NamingException: Lookup failed for 'BookstoreJNDI' in SerialContext ,orb'sInitialHost=localhost,orb'sInitialPort=3700 [Root exception is javax.naming.NamingException: Failed to look up ConnectorDescriptor from JNDI [Root exception is com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Error in creating active RAR]])

  Read the article

• Slowdowns when reading from an urlconnection's inputstream (even with byte[] and buffers)

  - by user342677

  Ok so after spending two days trying to figure out the problem, and reading about dizillion articles, i finally decided to man up and ask to for some advice(my first time here). Now to the issue at hand - I am writing a program which will parse api data from a game, namely battle logs. There will be A LOT of entries in the database(20+ million) and so the parsing speed for each battle log page matters quite a bit. The pages to be parsed look like this: http://api.erepublik.com/v1/feeds/battle_logs/10000/0. (see source code if using chrome, it doesnt display the page right). It has 1000 hit entries, followed by a little battle info(lastpage will have <1000 obviously). On average, a page contains 175000 characters, UTF-8 encoding, xml format(v 1.0). Program will run locally on a good PC, memory is virtually unlimited(so that creating byte[250000] is quite ok). The format never changes, which is quite convenient. Now, I started off as usual: //global vars,class declaration skipped public WebObject(String url_string, int connection_timeout, int read_timeout, boolean redirects_allowed, String user_agent) throws java.net.MalformedURLException, java.io.IOException { // Open a URL connection java.net.URL url = new java.net.URL(url_string); java.net.URLConnection uconn = url.openConnection(); if (!(uconn instanceof java.net.HttpURLConnection)) { throw new java.lang.IllegalArgumentException("URL protocol must be HTTP"); } conn = (java.net.HttpURLConnection) uconn; conn.setConnectTimeout(connection_timeout); conn.setReadTimeout(read_timeout); conn.setInstanceFollowRedirects(redirects_allowed); conn.setRequestProperty("User-agent", user_agent); } public void executeConnection() throws IOException { try { is = conn.getInputStream(); //global var l = conn.getContentLength(); //global var } catch (Exception e) { //handling code skipped } } //getContentStream and getLength methods which just return'is' and 'l' are skipped Here is where the fun part began. I ran some profiling (using System.currentTimeMillis()) to find out what takes long ,and what doesnt. The call to this method takes only 200ms on avg public InputStream getWebPageAsStream(int battle_id, int page) throws Exception { String url = "http://api.erepublik.com/v1/feeds/battle_logs/" + battle_id + "/" + page; WebObject wobj = new WebObject(url, 10000, 10000, true, "Mozilla/5.0 " + "(Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729)"); wobj.executeConnection(); l = wobj.getContentLength(); // global variable return wobj.getContentStream(); //returns 'is' stream } 200ms is quite expected from a network operation, and i am fine with it. BUT when i parse the inputStream in any way(read it into string/use java XML parser/read it into another ByteArrayStream) the process takes over 1000ms! for example, this code takes 1000ms IF i pass the stream i got('is') above from getContentStream() directly to this method: public static Document convertToXML(InputStream is) throws ParserConfigurationException, IOException, SAXException { DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance(); DocumentBuilder db = dbf.newDocumentBuilder(); Document doc = db.parse(is); doc.getDocumentElement().normalize(); return doc; } this code too, takes around 920ms IF the initial InputStream 'is' is passed in(dont read into the code itself - it just extracts the data i need by directly counting the characters, which can be done thanks to the rigid api feed format): public static parsedBattlePage convertBattleToXMLWithoutDOM(InputStream is) throws IOException { // Point A BufferedReader br = new BufferedReader(new InputStreamReader(is)); LinkedList ll = new LinkedList(); String str = br.readLine(); while (str != null) { ll.add(str); str = br.readLine(); } if (((String) ll.get(1)).indexOf("error") != -1) { return new parsedBattlePage(null, null, true, -1); } //Point B Iterator it = ll.iterator(); it.next(); it.next(); it.next(); it.next(); String[][] hits_arr = new String[1000][4]; String t_str = (String) it.next(); String tmp = null; int j = 0; for (int i = 0; t_str.indexOf("time") != -1; i++) { hits_arr[i][0] = t_str.substring(12, t_str.length() - 11); tmp = (String) it.next(); hits_arr[i][1] = tmp.substring(14, tmp.length() - 9); tmp = (String) it.next(); hits_arr[i][2] = tmp.substring(15, tmp.length() - 10); tmp = (String) it.next(); hits_arr[i][3] = tmp.substring(18, tmp.length() - 13); it.next(); it.next(); t_str = (String) it.next(); j++; } String[] b_info_arr = new String[9]; int[] space_nums = {13, 10, 13, 11, 11, 12, 5, 10, 13}; for (int i = 0; i < space_nums.length; i++) { tmp = (String) it.next(); b_info_arr[i] = tmp.substring(space_nums[i] + 4, tmp.length() - space_nums[i] - 1); } //Point C return new parsedBattlePage(hits_arr, b_info_arr, false, j); } I have tried replacing the default BufferedReader with BufferedReader br = new BufferedReader(new InputStreamReader(is), 250000); This didnt change much. My second try was to replace the code between A and B with: Iterator it = IOUtils.lineIterator(is, "UTF-8"); Same result, except this time A-B was 0ms, and B-C was 1000ms, so then every call to it.next() must have been consuming some significant time.(IOUtils is from apache-commons-io library). And here is the culprit - the time taken to parse the stream to string, be it by an iterator or BufferedReader in ALL cases was about 1000ms, while the rest of the code took 0ms(e.g. irrelevant). This means that parsing the stream to LinkedList, or iterating over it, for some reason was eating up a lot of my system resources. question was - why? Is it just the way java is made...no...thats just stupid, so I did another experiment. In my main method I added after the getWebPageAsStream(): //Point A ba = new byte[l]; // 'l' comes from wobj.getContentLength above bytesRead = is.read(ba); //'is' is our URLConnection original InputStream offset = bytesRead; while (bytesRead != -1) { bytesRead = is.read(ba, offset - 1, l - offset); offset += bytesRead; } //Point B InputStream is2 = new ByteArrayInputStream(ba); //Now just working with 'is2' - the "copied" stream The InputStream-byte[] conversion took again 1000ms - this is the way many ppl suggested to read an InputStream, and stil it is slow. And guess what - the 2 parser methods above (convertToXML() and convertBattlePagetoXMLWithoutDOM(), when passed 'is2' instead of 'is' took, in all 4 cases, under 50ms to complete. I read a suggestion that the stream waits for connection to close before unblocking, so i tried using HttpComponentsClient 4.0 (http://hc.apache.org/httpcomponents-client/index.html) instead, but the initial InputStream took just as long to parse. e.g. this code: public InputStream getWebPageAsStream2(int battle_id, int page) throws Exception { String url = "http://api.erepublik.com/v1/feeds/battle_logs/" + battle_id + "/" + page; HttpClient httpclient = new DefaultHttpClient(); HttpGet httpget = new HttpGet(url); HttpParams p = new BasicHttpParams(); HttpConnectionParams.setSocketBufferSize(p, 250000); HttpConnectionParams.setStaleCheckingEnabled(p, false); HttpConnectionParams.setConnectionTimeout(p, 5000); httpget.setParams(p); HttpResponse response = httpclient.execute(httpget); HttpEntity entity = response.getEntity(); l = (int) entity.getContentLength(); return entity.getContent(); } took even longer to process(50ms more for just the network) and the stream parsing times remained the same. Obviously it can be instantiated so as to not create HttpClient and properties every time(faster network time), but the stream issue wont be affected by that. So we come to the center problem - why does the initial URLConnection InputStream(or HttpClient InputStream) take so long to process, while any stream of same size and content created locally is orders of magnitude faster? I mean, the initial response is already somewhere in RAM, and I cant see any good reasong why it is processed so slowly compared to when a same stream is just created from a byte[]. Considering I have to parse million of entries and thousands of pages like that, a total processing time of almost 1.5s/page seems WAY WAY too long. Any ideas? P.S. Please ask in any more code is required - the only thing I do after parsing is make a PreparedStatement and put the entries into JavaDB in packs of 1000+, and the perfomance is ok ~ 200ms/1000entries, prb could be optimized with more cache but I didnt look into it much.

  Read the article

• Silverlight MVVM Confusion: Updating Image Based on State

  - by senfo

  I'm developing a Silverlight application and I'm trying to stick to the MVVM principals, but I'm running into some problems changing the source of an image based on the state of a property in the ViewModel. For all intents and purposes, you can think of the functionality I'm implementing as a play/pause button for an audio app. When in the "Play" mode, IsActive is true in the ViewModel and the "Pause.png" image on the button should be displayed. When paused, IsActive is false in the ViewModel and "Play.png" is displayed on the button. Naturally, there are two additional images to handle when the mouse hovers over the button. I thought I could use a Style Trigger, but apparently they're not supported in Silverlight. I've been reviewing a forum post with a question similar to mine where it's suggested to use the VisualStateManager. While this might help with changing the image for hover/normal states, the part missing (or I'm not understanding) is how this would work with a state set via the view model. The post seems to apply only to events rather than properties of the view model. Having said that, I also haven't successfully completed the normal/hover affects, either. Below is my Silverlight 4 XAML. It should also probably be noted I'm working with MVVM Light. <UserControl x:Class="Foo.Bar.MyUserControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity" mc:Ignorable="d" d:DesignHeight="100" d:DesignWidth="200"> <UserControl.Resources> <Style x:Key="MyButtonStyle" TargetType="Button"> <Setter Property="IsEnabled" Value="true"/> <Setter Property="IsTabStop" Value="true"/> <Setter Property="Background" Value="#FFA9A9A9"/> <Setter Property="Foreground" Value="#FF000000"/> <Setter Property="MinWidth" Value="5"/> <Setter Property="MinHeight" Value="5"/> <Setter Property="Margin" Value="0"/> <Setter Property="HorizontalAlignment" Value="Left" /> <Setter Property="HorizontalContentAlignment" Value="Center"/> <Setter Property="VerticalAlignment" Value="Top" /> <Setter Property="VerticalContentAlignment" Value="Center"/> <Setter Property="Cursor" Value="Hand"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="Button"> <Grid> <Image Source="/Foo.Bar;component/Resources/Icons/Bar/Play.png"> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="Active"> <VisualState x:Name="MouseOver"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Source" Storyboard.TargetName="/Foo.Bar;component/Resources/Icons/Bar/Play_Hover.png" /> </Storyboard> </VisualState> </VisualStateGroup> </VisualStateManager.VisualStateGroups> </Image> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> </UserControl.Resources> <Grid x:Name="LayoutRoot" Background="White"> <Button Style="{StaticResource MyButtonStyle}" Command="{Binding ChangeStatus}" Height="30" Width="30" /> </Grid> </UserControl> What is the proper way to update images on buttons with the state determined by the view model? Update I changed my Button to a ToggleButton hoping I could use the Checked state to differentiate between play/pause. I practically have it, but I ran into one additional problem. I need to account for two states at the same time. For example, Checked Normal/Hover and Unchecked Normal/Hover. Following is my updated XAML: <UserControl x:Class="Foo.Bar.MyUserControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity" mc:Ignorable="d" d:DesignHeight="100" d:DesignWidth="200"> <UserControl.Resources> <Style x:Key="MyButtonStyle" TargetType="ToggleButton"> <Setter Property="IsEnabled" Value="true"/> <Setter Property="IsTabStop" Value="true"/> <Setter Property="Background" Value="#FFA9A9A9"/> <Setter Property="Foreground" Value="#FF000000"/> <Setter Property="MinWidth" Value="5"/> <Setter Property="MinHeight" Value="5"/> <Setter Property="Margin" Value="0"/> <Setter Property="HorizontalAlignment" Value="Left" /> <Setter Property="HorizontalContentAlignment" Value="Center"/> <Setter Property="VerticalAlignment" Value="Top" /> <Setter Property="VerticalContentAlignment" Value="Center"/> <Setter Property="Cursor" Value="Hand"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="ToggleButton"> <Grid> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="CommonStates"> <VisualState x:Name="Normal"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="Pause"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Visibility>Collapsed</Visibility> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="MouseOver"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="PlayHover"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Visibility>Visible</Visibility> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="Play"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Visibility>Collapsed</Visibility> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> </VisualStateGroup> <VisualStateGroup x:Name="CheckStates"> <VisualState x:Name="Checked"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="Pause"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Visibility>Visible</Visibility> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="Play"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Visibility>Collapsed</Visibility> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="PlayHover"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Visibility>Collapsed</Visibility> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="Unchecked" /> </VisualStateGroup> </VisualStateManager.VisualStateGroups> <Image x:Name="Play" Source="/Foo.Bar;component/Resources/Icons/Bar/Play.png" /> <Image x:Name="Pause" Source="/Foo.Bar;component/Resources/Icons/Bar/Pause.png" Visibility="Collapsed" /> <Image x:Name="PlayHover" Source="/Foo.Bar;component/Resources/Icons/Bar/Play_Hover.png" Visibility="Collapsed" /> <Image x:Name="PauseHover" Source="/Foo.Bar;component/Resources/Icons/Bar/Pause_Hover.png" Visibility="Collapsed" /> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> </UserControl.Resources> <Grid x:Name="LayoutRoot" Background="White"> <ToggleButton Style="{StaticResource MyButtonStyle}" IsChecked="{Binding IsPlaying}" Command="{Binding ChangeStatus}" Height="30" Width="30" /> </Grid> </UserControl>

  Read the article

• Help Optimizing MySQL Table (~ 500,000 records) and PHP Code.

  - by Pyrite

  I have a MySQL table that collects player data from various game servers (Urban Terror). The bot that collects the data runs 24/7, and currently the table is up to about 475,000+ records. Because of this, querying this table from PHP has become quite slow. I wonder what I can do on the database side of things to make it as optomized as possible, then I can focus on the application to query the database. The table is as follows: CREATE TABLE IF NOT EXISTS `people` ( `id` bigint(20) unsigned NOT NULL AUTO_INCREMENT, `name` varchar(40) NOT NULL, `ip` int(4) unsigned NOT NULL, `guid` varchar(32) NOT NULL, `server` int(4) unsigned NOT NULL, `date` int(11) NOT NULL, PRIMARY KEY (`id`), UNIQUE KEY `Person` (`name`,`ip`,`guid`), KEY `server` (`server`), KEY `date` (`date`), KEY `PlayerName` (`name`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 COMMENT='People that Play on Servers' AUTO_INCREMENT=475843 ; I'm storying the IPv4 (ip and server) as 4 byte integers, and using the MySQL functions NTOA(), etc to encode and decode, I heard that this way is faster, rather than varchar(15). The guid is a md5sum, 32 char hex. Date is stored as unix timestamp. I have a unique key on name, ip and guid, as to avoid duplicates of the same player. Do I have my keys setup right? Is the way I'm storing data efficient? Here is the code to query this table. You search for a name, ip, or guid, and it grabs the results of the query and cross references other records that match the name, ip, or guid from the results of the first query, and does it for each field. This is kind of hard to explain. But basically, if I search for one player by name, I'll see every other name he has used, every IP he has used and every GUID he has used. <form action="<?php echo $_SERVER['PHP_SELF']; ?>" method="post"> Search: <input type="text" name="query" id="query" /><input type="submit" name="btnSubmit" value="Submit" /> </form> <?php if (!empty($_POST['query'])) { ?> <table cellspacing="1" id="1up_people" class="tablesorter" width="300"> <thead> <tr> <th>ID</th> <th>Player Name</th> <th>Player IP</th> <th>Player GUID</th> <th>Server</th> <th>Date</th> </tr> </thead> <tbody> <?php function super_unique($array) { $result = array_map("unserialize", array_unique(array_map("serialize", $array))); foreach ($result as $key => $value) { if ( is_array($value) ) { $result[$key] = super_unique($value); } } return $result; } if (!empty($_POST['query'])) { $query = trim($_POST['query']); $count = 0; $people = array(); $link = mysql_connect('localhost', 'mysqluser', 'yea right!'); if (!$link) { die('Could not connect: ' . mysql_error()); } mysql_select_db("1up"); $sql = "SELECT id, name, INET_NTOA(ip) AS ip, guid, INET_NTOA(server) AS server, date FROM 1up_people WHERE (name LIKE \"%$query%\" OR INET_NTOA(ip) LIKE \"%$query%\" OR guid LIKE \"%$query%\")"; $result = mysql_query($sql, $link); if (!$result) { die(mysql_error()); } // Now take the initial results and parse each column into its own array while ($row = mysql_fetch_array($result, MYSQL_NUM)) { $name = htmlspecialchars($row[1]); $people[] = array( 'id' => $row[0], 'name' => $name, 'ip' => $row[2], 'guid' => $row[3], 'server' => $row[4], 'date' => $row[5] ); } // now for each name, ip, guid in results, find additonal records $people2 = array(); foreach ($people AS $person) { $ip = $person['ip']; $sql = "SELECT id, name, INET_NTOA(ip) AS ip, guid, INET_NTOA(server) AS server, date FROM 1up_people WHERE (ip = \"$ip\")"; $result = mysql_query($sql, $link); while ($row = mysql_fetch_array($result, MYSQL_NUM)) { $name = htmlspecialchars($row[1]); $people2[] = array( 'id' => $row[0], 'name' => $name, 'ip' => $row[2], 'guid' => $row[3], 'server' => $row[4], 'date' => $row[5] ); } } $people3 = array(); foreach ($people AS $person) { $guid = $person['guid']; $sql = "SELECT id, name, INET_NTOA(ip) AS ip, guid, INET_NTOA(server) AS server, date FROM 1up_people WHERE (guid = \"$guid\")"; $result = mysql_query($sql, $link); while ($row = mysql_fetch_array($result, MYSQL_NUM)) { $name = htmlspecialchars($row[1]); $people3[] = array( 'id' => $row[0], 'name' => $name, 'ip' => $row[2], 'guid' => $row[3], 'server' => $row[4], 'date' => $row[5] ); } } $people4 = array(); foreach ($people AS $person) { $name = $person['name']; $sql = "SELECT id, name, INET_NTOA(ip) AS ip, guid, INET_NTOA(server) AS server, date FROM 1up_people WHERE (name = \"$name\")"; $result = mysql_query($sql, $link); while ($row = mysql_fetch_array($result, MYSQL_NUM)) { $name = htmlspecialchars($row[1]); $people4[] = array( 'id' => $row[0], 'name' => $name, 'ip' => $row[2], 'guid' => $row[3], 'server' => $row[4], 'date' => $row[5] ); } } // Combine people and people2 into just people $people = array_merge($people, $people2); $people = array_merge($people, $people3); $people = array_merge($people, $people4); $people = super_unique($people); foreach ($people AS $person) { $date = ($person['date']) ? date("M d, Y", $person['date']) : 'Before 8/1/10'; echo "<tr>\n"; echo "<td>".$person['id']."</td>"; echo "<td>".$person['name']."</td>"; echo "<td>".$person['ip']."</td>"; echo "<td>".$person['guid']."</td>"; echo "<td>".$person['server']."</td>"; echo "<td>".$date."</td>"; echo "</tr>\n"; $count++; } // Find Total Records //$result = mysql_query("SELECT id FROM 1up_people", $link); //$total = mysql_num_rows($result); mysql_close($link); } ?> </tbody> </table> <p> <?php echo $count." Records Found for \"".$_POST['query']."\" out of $total"; ?> </p> <?php } $time_stop = microtime(true); print("Done (ran for ".round($time_stop-$time_start)." seconds)."); ?> Any help at all is appreciated! Thank you.

  Read the article

• MySQL Config File for Large System

  - by Jonathon

  We are running MySQL on a Windows 2003 Server Enterpise Edition box. MySQL is about the only program running on the box. We have approx. 8 slaves replicated to it, but my understanding is that having multiple slaves connecting to the same master does not significantly slow down performance, if at all. The master server has 16G RAM, 10 Terabyte drives in RAID 10, and four dual-core processors. From what I have seen from other sites, we have a really robust machine as our master db server. We just upgraded from a machine with only 4G RAM, but with similar hard drives, RAID, etc. It also ran Apache on it, so it was our db server and our application server. It was getting a little slow, so we split the db server onto this new machine and kept the application server on the first machine. We also distributed the application load amongst a few of our other slave servers, which also run the application. The problem is the new db server has mysqld.exe consuming 95-100% of CPU almost all the time and is really causing the app to run slowly. I know we have several queries and table structures that could be better optimized, but since they worked okay on the older, smaller server, I assume that our my.ini (MySQL config) file is not properly configured. Most of what I see on the net is for setting config files on small machines, so can anyone help me get the my.ini file correct for a large dedicated machine like ours? I just don't see how mysqld could get so bogged down! FYI: We have about 100 queries per second. We only use MyISAM tables, so skip-innodb is set in the ini file. And yes, I know it is reading the ini file correctly because I can change some settings (like the server-id and it will kill the server at startup). Here is the my.ini file: #MySQL Server Instance Configuration File # ---------------------------------------------------------------------- # Generated by the MySQL Server Instance Configuration Wizard # # # Installation Instructions # ---------------------------------------------------------------------- # # On Linux you can copy this file to /etc/my.cnf to set global options, # mysql-data-dir/my.cnf to set server-specific options # (@localstatedir@ for this installation) or to # ~/.my.cnf to set user-specific options. # # On Windows you should keep this file in the installation directory # of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To # make sure the server reads the config file use the startup option # "--defaults-file". # # To run run the server from the command line, execute this in a # command line shell, e.g. # mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini" # # To install the server as a Windows service manually, execute this in a # command line shell, e.g. # mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini" # # And then execute this in a command line shell to start the server, e.g. # net start MySQLXY # # # Guildlines for editing this file # ---------------------------------------------------------------------- # # In this file, you can use all long options that the program supports. # If you want to know the options a program supports, start the program # with the "--help" option. # # More detailed information about the individual options can also be # found in the manual. # # # CLIENT SECTION # ---------------------------------------------------------------------- # # The following options will be read by MySQL client applications. # Note that only client applications shipped by MySQL are guaranteed # to read this section. If you want your own MySQL client program to # honor these values, you need to specify it as an option during the # MySQL client library initialization. # [client] port=3306 [mysql] default-character-set=latin1 # SERVER SECTION # ---------------------------------------------------------------------- # # The following options will be read by the MySQL Server. Make sure that # you have installed the server correctly (see above) so it reads this # file. # [mysqld] # The TCP/IP Port the MySQL Server will listen on port=3306 #Path to installation directory. All paths are usually resolved relative to this. basedir="D:/MySQL/" #Path to the database root datadir="D:/MySQL/data" # The default character set that will be used when a new schema or table is # created and no character set is defined default-character-set=latin1 # The default storage engine that will be used when create new tables when default-storage-engine=MYISAM # Set the SQL mode to strict #sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION" # we changed this because there are a couple of queries that can get blocked otherwise sql-mode="" #performance configs skip-locking max_allowed_packet = 1M table_open_cache = 512 # The maximum amount of concurrent sessions the MySQL server will # allow. One of these connections will be reserved for a user with # SUPER privileges to allow the administrator to login even if the # connection limit has been reached. max_connections=1510 # Query cache is used to cache SELECT results and later return them # without actual executing the same query once again. Having the query # cache enabled may result in significant speed improvements, if your # have a lot of identical queries and rarely changing tables. See the # "Qcache_lowmem_prunes" status variable to check if the current value # is high enough for your load. # Note: In case your tables change very often or if your queries are # textually different every time, the query cache may result in a # slowdown instead of a performance improvement. query_cache_size=168M # The number of open tables for all threads. Increasing this value # increases the number of file descriptors that mysqld requires. # Therefore you have to make sure to set the amount of open files # allowed to at least 4096 in the variable "open-files-limit" in # section [mysqld_safe] table_cache=3020 # Maximum size for internal (in-memory) temporary tables. If a table # grows larger than this value, it is automatically converted to disk # based table This limitation is for a single table. There can be many # of them. tmp_table_size=30M # How many threads we should keep in a cache for reuse. When a client # disconnects, the client's threads are put in the cache if there aren't # more than thread_cache_size threads from before. This greatly reduces # the amount of thread creations needed if you have a lot of new # connections. (Normally this doesn't give a notable performance # improvement if you have a good thread implementation.) thread_cache_size=64 #*** MyISAM Specific options # The maximum size of the temporary file MySQL is allowed to use while # recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE. # If the file-size would be bigger than this, the index will be created # through the key cache (which is slower). myisam_max_sort_file_size=100G # If the temporary file used for fast index creation would be bigger # than using the key cache by the amount specified here, then prefer the # key cache method. This is mainly used to force long character keys in # large tables to use the slower key cache method to create the index. myisam_sort_buffer_size=64M # Size of the Key Buffer, used to cache index blocks for MyISAM tables. # Do not set it larger than 30% of your available memory, as some memory # is also required by the OS to cache rows. Even if you're not using # MyISAM tables, you should still set it to 8-64M as it will also be # used for internal temporary disk tables. key_buffer_size=3072M # Size of the buffer used for doing full table scans of MyISAM tables. # Allocated per thread, if a full scan is needed. read_buffer_size=2M read_rnd_buffer_size=8M # This buffer is allocated when MySQL needs to rebuild the index in # REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE # into an empty table. It is allocated per thread so be careful with # large settings. sort_buffer_size=2M #*** INNODB Specific options *** innodb_data_home_dir="D:/MySQL InnoDB Datafiles/" # Use this option if you have a MySQL server with InnoDB support enabled # but you do not plan to use it. This will save memory and disk space # and speed up some things. skip-innodb # Additional memory pool that is used by InnoDB to store metadata # information. If InnoDB requires more memory for this purpose it will # start to allocate it from the OS. As this is fast enough on most # recent operating systems, you normally do not need to change this # value. SHOW INNODB STATUS will display the current amount used. innodb_additional_mem_pool_size=11M # If set to 1, InnoDB will flush (fsync) the transaction logs to the # disk at each commit, which offers full ACID behavior. If you are # willing to compromise this safety, and you are running small # transactions, you may set this to 0 or 2 to reduce disk I/O to the # logs. Value 0 means that the log is only written to the log file and # the log file flushed to disk approximately once per second. Value 2 # means the log is written to the log file at each commit, but the log # file is only flushed to disk approximately once per second. innodb_flush_log_at_trx_commit=1 # The size of the buffer InnoDB uses for buffering log data. As soon as # it is full, InnoDB will have to flush it to disk. As it is flushed # once per second anyway, it does not make sense to have it very large # (even with long transactions). innodb_log_buffer_size=6M # InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and # row data. The bigger you set this the less disk I/O is needed to # access data in tables. On a dedicated database server you may set this # parameter up to 80% of the machine physical memory size. Do not set it # too large, though, because competition of the physical memory may # cause paging in the operating system. Note that on 32bit systems you # might be limited to 2-3.5G of user level memory per process, so do not # set it too high. innodb_buffer_pool_size=500M # Size of each log file in a log group. You should set the combined size # of log files to about 25%-100% of your buffer pool size to avoid # unneeded buffer pool flush activity on log file overwrite. However, # note that a larger logfile size will increase the time needed for the # recovery process. innodb_log_file_size=100M # Number of threads allowed inside the InnoDB kernel. The optimal value # depends highly on the application, hardware as well as the OS # scheduler properties. A too high value may lead to thread thrashing. innodb_thread_concurrency=10 #replication settings (this is the master) log-bin=log server-id = 1 Thanks for all the help. It is greatly appreciated.

  Read the article

• Help Optimizing MySQL Table (~ 500,000 records).

  - by Pyrite

  I have a MySQL table that collects player data from various game servers (Urban Terror). The bot that collects the data runs 24/7, and currently the table is up to about 475,000+ records. Because of this, querying this table from PHP has become quite slow. I wonder what I can do on the database side of things to make it as optomized as possible, then I can focus on the application to query the database. The table is as follows: CREATE TABLE IF NOT EXISTS `people` ( `id` bigint(20) unsigned NOT NULL AUTO_INCREMENT, `name` varchar(40) NOT NULL, `ip` int(4) unsigned NOT NULL, `guid` varchar(32) NOT NULL, `server` int(4) unsigned NOT NULL, `date` int(11) NOT NULL, PRIMARY KEY (`id`), UNIQUE KEY `Person` (`name`,`ip`,`guid`), KEY `server` (`server`), KEY `date` (`date`), KEY `PlayerName` (`name`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 COMMENT='People that Play on Servers' AUTO_INCREMENT=475843 ; I'm storying the IPv4 (ip and server) as 4 byte integers, and using the MySQL functions NTOA(), etc to encode and decode, I heard that this way is faster, rather than varchar(15). The guid is a md5sum, 32 char hex. Date is stored as unix timestamp. I have a unique key on name, ip and guid, as to avoid duplicates of the same player. Do I have my keys setup right? Is the way I'm storing data efficient? Here is the code to query this table. You search for a name, ip, or guid, and it grabs the results of the query and cross references other records that match the name, ip, or guid from the results of the first query, and does it for each field. This is kind of hard to explain. But basically, if I search for one player by name, I'll see every other name he has used, every IP he has used and every GUID he has used. <form action="<?php echo $_SERVER['PHP_SELF']; ?>" method="post"> Search: <input type="text" name="query" id="query" /><input type="submit" name="btnSubmit" value="Submit" /> </form> <?php if (!empty($_POST['query'])) { ?> <table cellspacing="1" id="1up_people" class="tablesorter" width="300"> <thead> <tr> <th>ID</th> <th>Player Name</th> <th>Player IP</th> <th>Player GUID</th> <th>Server</th> <th>Date</th> </tr> </thead> <tbody> <?php function super_unique($array) { $result = array_map("unserialize", array_unique(array_map("serialize", $array))); foreach ($result as $key => $value) { if ( is_array($value) ) { $result[$key] = super_unique($value); } } return $result; } if (!empty($_POST['query'])) { $query = trim($_POST['query']); $count = 0; $people = array(); $link = mysql_connect('localhost', 'mysqluser', 'yea right!'); if (!$link) { die('Could not connect: ' . mysql_error()); } mysql_select_db("1up"); $sql = "SELECT id, name, INET_NTOA(ip) AS ip, guid, INET_NTOA(server) AS server, date FROM 1up_people WHERE (name LIKE \"%$query%\" OR INET_NTOA(ip) LIKE \"%$query%\" OR guid LIKE \"%$query%\")"; $result = mysql_query($sql, $link); if (!$result) { die(mysql_error()); } // Now take the initial results and parse each column into its own array while ($row = mysql_fetch_array($result, MYSQL_NUM)) { $name = htmlspecialchars($row[1]); $people[] = array( 'id' => $row[0], 'name' => $name, 'ip' => $row[2], 'guid' => $row[3], 'server' => $row[4], 'date' => $row[5] ); } // now for each name, ip, guid in results, find additonal records $people2 = array(); foreach ($people AS $person) { $ip = $person['ip']; $sql = "SELECT id, name, INET_NTOA(ip) AS ip, guid, INET_NTOA(server) AS server, date FROM 1up_people WHERE (ip = \"$ip\")"; $result = mysql_query($sql, $link); while ($row = mysql_fetch_array($result, MYSQL_NUM)) { $name = htmlspecialchars($row[1]); $people2[] = array( 'id' => $row[0], 'name' => $name, 'ip' => $row[2], 'guid' => $row[3], 'server' => $row[4], 'date' => $row[5] ); } } $people3 = array(); foreach ($people AS $person) { $guid = $person['guid']; $sql = "SELECT id, name, INET_NTOA(ip) AS ip, guid, INET_NTOA(server) AS server, date FROM 1up_people WHERE (guid = \"$guid\")"; $result = mysql_query($sql, $link); while ($row = mysql_fetch_array($result, MYSQL_NUM)) { $name = htmlspecialchars($row[1]); $people3[] = array( 'id' => $row[0], 'name' => $name, 'ip' => $row[2], 'guid' => $row[3], 'server' => $row[4], 'date' => $row[5] ); } } $people4 = array(); foreach ($people AS $person) { $name = $person['name']; $sql = "SELECT id, name, INET_NTOA(ip) AS ip, guid, INET_NTOA(server) AS server, date FROM 1up_people WHERE (name = \"$name\")"; $result = mysql_query($sql, $link); while ($row = mysql_fetch_array($result, MYSQL_NUM)) { $name = htmlspecialchars($row[1]); $people4[] = array( 'id' => $row[0], 'name' => $name, 'ip' => $row[2], 'guid' => $row[3], 'server' => $row[4], 'date' => $row[5] ); } } // Combine people and people2 into just people $people = array_merge($people, $people2); $people = array_merge($people, $people3); $people = array_merge($people, $people4); $people = super_unique($people); foreach ($people AS $person) { $date = ($person['date']) ? date("M d, Y", $person['date']) : 'Before 8/1/10'; echo "<tr>\n"; echo "<td>".$person['id']."</td>"; echo "<td>".$person['name']."</td>"; echo "<td>".$person['ip']."</td>"; echo "<td>".$person['guid']."</td>"; echo "<td>".$person['server']."</td>"; echo "<td>".$date."</td>"; echo "</tr>\n"; $count++; } // Find Total Records //$result = mysql_query("SELECT id FROM 1up_people", $link); //$total = mysql_num_rows($result); mysql_close($link); } ?> </tbody> </table> <p> <?php echo $count." Records Found for \"".$_POST['query']."\" out of $total"; ?> </p> <?php } $time_stop = microtime(true); print("Done (ran for ".round($time_stop-$time_start)." seconds)."); ?> Any help at all is appreciated! Thank you.

  Read the article

• Can't add client machine to windows server 2008 domain controller

  - by Patrick J Collins

  A bit of background before I dive into the gritty details: I have a single server running Windows 2003 Server where I host my ASP.net website and SQL Server + Reports. I've been creating ordinary windows user accounts to authenticate my users, and I enabled integrated windows authentication with impersonation. I've set up a bunch of user groups which correspond to certain roles (admin, power user, normal user, etc) and I test membership to enable or disable certain features. Overall, I'm pretty happy with the solution, it was quick to setup and I don't have to worry about messing around storing passwords and whatnot. Well, what I'm trying to do now is set up a new environment with 3 servers (Web, SQL, Reports) and I'd like these three servers to share common user accounts. I understand that I could add these three machines to a domain, which means installing Active Directory on one of the machines. I am barking up the wrong tree here? Would you suggest an alternative configuration? Assuming that I stick with AD, I have a couple of questions regarding DNS. To be honest, I'd rather not fiddle around with the DNS settings because my ISP already has their own DNS server which works just fine. It would appear however that DNS and AD are intertwined. Firstly, if I am to create a new domain in called mycompany.net, do I actually need to be the registered owner of that domain name and ensure the DNS entry points to the IP address of the machine hosting AD? Secondly, for the two other machines that I am trying to add to the domain, do I need to fiddle with their DNS settings? I've tried setting the preferred DNS Server IP address to that of my newly installed AD, but no luck. At this point, I can't add the two other machines to the domain. Here are some diagnostics that I have run based on a few suggestions I read on forums (sorry they're in French, although I could translate if needed). I ran nltest, which seems to indicate that the client can discover the domain controller. When I run dcdiag, the call to DsGetDcName fails with error 1722, not really sure what that means. Any suggestions? Thanks! C:\Users\Administrator>nltest /dsgetdc:mycompany.net Contrôleur de domaine : \\REPORTS.mycompany.net Adresse : \\111.111.111.111 GUID dom : 3333a4ec-ca56-4f02-bb9e-76c29c6c3832 Nom dom : mycompany.net Nom de la forêt : mycompany.net Nom de site du contrôleur de domaine : Default-First-Site-Name Nom de notre site : Default-First-Site-Name Indicateurs : PDC GC DS LDAP KDC TIMESERV WRITABLE DNS_DC DNS_DOMAIN DNS _FOREST CLOSE_SITE FULL_SECRET La commande a été correctement exécutée C:\Users\Administrator>dcdiag /s:mycompany.net /u: mycompany.net \pcollins /p:somepass Diagnostic du serveur d'annuaire Exécution de l'installation initiale : * Forêt AD identifiée. Collecte des informations initiales terminée. Exécution des tests initiaux nécessaires Test du serveur : Default-First-Site-Name\REPORTS Démarrage du test : Connectivity ......................... Le test Connectivity de REPORTS a réussi Exécution des tests principaux Test du serveur : Default-First-Site-Name\REPORTS Démarrage du test : Advertising Erreur irrécupérable : l'appel DsGetDcName (REPORTS) a échoué ; erreur 1722 Le localisateur n'a pas pu trouver le serveur. ......................... Le test Advertising de REPORTS a échoué Démarrage du test : FrsEvent Impossible d'interroger le journal des événements File Replication Service sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test FrsEvent de REPORTS a échoué Démarrage du test : DFSREvent Impossible d'interroger le journal des événements DFS Replication sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test DFSREvent de REPORTS a échoué Démarrage du test : SysVolCheck [REPORTS] Une opération net use ou LsaPolicy a échoué avec l'erreur 53, Le chemin réseau n'a pas été trouvé.. ......................... Le test SysVolCheck de REPORTS a échoué Démarrage du test : KccEvent Impossible d'interroger le journal des événements Directory Service sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test KccEvent de REPORTS a échoué Démarrage du test : KnowsOfRoleHolders ......................... Le test KnowsOfRoleHolders de REPORTS a réussi Démarrage du test : MachineAccount Impossible d'ouvrir le canal avec [REPORTS] : échec avec l'erreur 53 : Le chemin réseau n'a pas été trouvé. Impossible d'obtenir le nom de domaine NetBIOS Échec : impossible de tester le nom principal de service (SPN) HOST Échec : impossible de tester le nom principal de service (SPN) HOST ......................... Le test MachineAccount de REPORTS a réussi Démarrage du test : NCSecDesc ......................... Le test NCSecDesc de REPORTS a réussi Démarrage du test : NetLogons [REPORTS] Une opération net use ou LsaPolicy a échoué avec l'erreur 53, Le chemin réseau n'a pas été trouvé.. ......................... Le test NetLogons de REPORTS a échoué Démarrage du test : ObjectsReplicated ......................... Le test ObjectsReplicated de REPORTS a réussi Démarrage du test : Replications ......................... Le test Replications de REPORTS a réussi Démarrage du test : RidManager ......................... Le test RidManager de REPORTS a réussi Démarrage du test : Services Impossible d'ouvrir IPC distant à [REPORTS.mycompany.net] : erreur 0x35 « Le chemin réseau n'a pas été trouvé. » ......................... Le test Services de REPORTS a échoué Démarrage du test : SystemLog Impossible d'interroger le journal des événements System sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test SystemLog de REPORTS a échoué Démarrage du test : VerifyReferences ......................... Le test VerifyReferences de REPORTS a réussi Exécution de tests de partitions sur ForestDnsZones Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de ForestDnsZones a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de ForestDnsZones a réussi Exécution de tests de partitions sur DomainDnsZones Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de DomainDnsZones a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de DomainDnsZones a réussi Exécution de tests de partitions sur Schema Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de Schema a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de Schema a réussi Exécution de tests de partitions sur Configuration Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de Configuration a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de Configuration a réussi Exécution de tests de partitions sur mycompany Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de mycompany a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de mycompany a réussi Exécution de tests d'entreprise sur mycompany.net Démarrage du test : LocatorCheck Avertissement : l'appel DcGetDcName(GC_SERVER_REQUIRED) a échoué ; erreur 1722 Serveur de catalogue global introuvable - Les catalogues globaux ne fonctionnent pas. Avertissement : l'appel DcGetDcName(PDC_REQUIRED) a échoué ; erreur 1722 Contrôleur principal de domaine introuvable. Le serveur contenant le rôle PDC ne fonctionne pas. Avertissement : l'appel DcGetDcName(TIME_SERVER) a échoué ; erreur 1722 Serveur de temps introuvable. Le serveur contenant le rôle PDC ne fonctionne pas. Avertissement : l'appel DcGetDcName(GOOD_TIME_SERVER_PREFERRED) a échoué ; erreur 1722 Serveur de temps introuvable. Avertissement : l'appel DcGetDcName(KDC_REQUIRED) a échoué ; erreur 1722 Centre de distribution de clés introuvable : les centres de distribution de clés ne fonctionnent pas. ......................... Le test LocatorCheck de mycompany.net a échoué Démarrage du test : Intersite ......................... Le test Intersite de mycompany.net a réussi Update 1 : I am under the distinct impression that the problem is caused by some security settings. I have read elsewhere that the client needs to be able to access the fileshare sysvol. I had to enable Client for Microsoft Windows and File and Printer Sharing which were previously disabled. When I now run dcdiag the Advertising test works, which I suppose is forward progress. It currently chokes on the Services step (unable to open remote IPC). Démarrage du test : Services Impossible d'ouvrir IPC distant à [REPORTS.locbus.net] : erreur 0x35 « Le chemin réseau n'a pas été trouvé. » ......................... Le test Services de REPORTS a échoué The original English version of that error message : Could not open Remote ipc to [server] Update 2 : I attach some more diagnostics : Netsetup.log (client): 09/24/2009 13:27:09:773 ----------------------------------------------------------------- 09/24/2009 13:27:09:773 NetpValidateName: checking to see if 'WEB' is valid as type 1 name 09/24/2009 13:27:12:773 NetpCheckNetBiosNameNotInUse for 'WEB' [MACHINE] returned 0x0 09/24/2009 13:27:12:773 NetpValidateName: name 'WEB' is valid for type 1 09/24/2009 13:27:12:805 ----------------------------------------------------------------- 09/24/2009 13:27:12:805 NetpValidateName: checking to see if 'WEB' is valid as type 5 name 09/24/2009 13:27:12:805 NetpValidateName: name 'WEB' is valid for type 5 09/24/2009 13:27:12:852 ----------------------------------------------------------------- 09/24/2009 13:27:12:852 NetpValidateName: checking to see if 'MYCOMPANY.NET' is valid as type 3 name 09/24/2009 13:27:12:992 NetpCheckDomainNameIsValid [ Exists ] for 'MYCOMPANY.NET' returned 0x0 09/24/2009 13:27:12:992 NetpValidateName: name 'MYCOMPANY.NET' is valid for type 3 09/24/2009 13:27:21:320 ----------------------------------------------------------------- 09/24/2009 13:27:21:320 NetpDoDomainJoin 09/24/2009 13:27:21:320 NetpMachineValidToJoin: 'WEB' 09/24/2009 13:27:21:320 OS Version: 6.0 09/24/2009 13:27:21:320 Build number: 6002 09/24/2009 13:27:21:320 ServicePack: Service Pack 2 09/24/2009 13:27:21:414 SKU: Windows Server® 2008 Standard 09/24/2009 13:27:21:414 NetpDomainJoinLicensingCheck: ulLicenseValue=1, Status: 0x0 09/24/2009 13:27:21:414 NetpGetLsaPrimaryDomain: status: 0x0 09/24/2009 13:27:21:414 NetpMachineValidToJoin: status: 0x0 09/24/2009 13:27:21:414 NetpJoinDomain 09/24/2009 13:27:21:414 Machine: WEB 09/24/2009 13:27:21:414 Domain: MYCOMPANY.NET 09/24/2009 13:27:21:414 MachineAccountOU: (NULL) 09/24/2009 13:27:21:414 Account: MYCOMPANY.NET\pcollins 09/24/2009 13:27:21:414 Options: 0x25 09/24/2009 13:27:21:414 NetpLoadParameters: loading registry parameters... 09/24/2009 13:27:21:414 NetpLoadParameters: DNSNameResolutionRequired not found, defaulting to '1' 0x2 09/24/2009 13:27:21:414 NetpLoadParameters: status: 0x2 09/24/2009 13:27:21:414 NetpValidateName: checking to see if 'MYCOMPANY.NET' is valid as type 3 name 09/24/2009 13:27:21:523 NetpCheckDomainNameIsValid [ Exists ] for 'MYCOMPANY.NET' returned 0x0 09/24/2009 13:27:21:523 NetpValidateName: name 'MYCOMPANY.NET' is valid for type 3 09/24/2009 13:27:21:523 NetpDsGetDcName: trying to find DC in domain 'MYCOMPANY.NET', flags: 0x40001010 09/24/2009 13:27:22:039 NetpDsGetDcName: failed to find a DC having account 'WEB$': 0x525, last error is 0x79 09/24/2009 13:27:22:039 NetpDsGetDcName: status of verifying DNS A record name resolution for 'KING.MYCOMPANY.NET': 0x0 09/24/2009 13:27:22:039 NetpDsGetDcName: found DC '\\KING.MYCOMPANY.NET' in the specified domain 09/24/2009 13:27:30:039 NetUseAdd to \\KING.MYCOMPANY.NET\IPC$ returned 53 09/24/2009 13:27:30:039 NetpJoinDomain: status of connecting to dc '\\KING.MYCOMPANY.NET': 0x35 09/24/2009 13:27:30:039 NetpDoDomainJoin: status: 0x35 09/24/2009 13:27:30:148 ----------------------------------------------------------------- ipconfig /all (on client): Configuration IP de Windows Nom de l'hôte . . . . . . . . . . : WEB Suffixe DNS principal . . . . . . : Type de noeud. . . . . . . . . . : Hybride Routage IP activé . . . . . . . . : Non Proxy WINS activé . . . . . . . . : Non Carte Ethernet Connexion au réseau local : Suffixe DNS propre à la connexion. . . : Description. . . . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapter (Emulated) Adresse physique . . . . . . . . . . . : **-15-5D-A1-17-** DHCP activé. . . . . . . . . . . . . . : Non Configuration automatique activée. . . : Oui Adresse IPv4. . . . . . . . . . . : **.***.163.122(préféré) Masque de sous-réseau. . . . . . . . . : 255.255.255.0 Passerelle par défaut. . . . . . . . . : **.***.163.2 Serveurs DNS. . . . . . . . . . . . . : **.***.163.123 NetBIOS sur Tcpip. . . . . . . . . . . : Activé ipconfig /all (on server): Configuration IP de Windows Nom de l'hôte . . . . . . . . . . : KING Suffixe DNS principal . . . . . . : mycompany.net Type de noeud. . . . . . . . . . : Hybride Routage IP activé . . . . . . . . : Non Proxy WINS activé . . . . . . . . : Non Liste de recherche du suffixe DNS.: locbus.net Carte Ethernet Connexion au réseau local : Suffixe DNS propre à la connexion. . . : Description. . . . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapter (Emulated) Adresse physique . . . . . . . . . . . : **-15-5D-A1-1E-** DHCP activé. . . . . . . . . . . . . . : Non Configuration automatique activée. . . : Oui Adresse IPv4. . . . . . . . . . . : **.***.163.123(préféré) Masque de sous-réseau. . . . . . . . . : 255.255.255.0 Passerelle par défaut. . . . . . . . . : **.***.163.2 Serveurs DNS. . . . . . . . . . . . . : 127.0.0.1 NetBIOS sur Tcpip. . . . . . . . . . . : Activé nslookup (on client): Serveur : *******.***.com Address: **.***.163.123 Nom : mycompany.net Addresses: ****:****:a37b::****:a37b **.****.163.123

  Read the article

• Pulseaudio is no longer working in Debian Squeeze: 'Failed to open module "module-combine-sink": file not found'

  - by mattalexx

  I'm having a problem with pulseaudio. My machine crashed, and when I rebooted and ran pavucontrol, I got a "Connection Failed: Connection refused" dialog. When I run pulseaudio --log-level=info --log-target=stderr from the command line, I get the following output: [...] I: alsa-util.c: Error opening PCM device front:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device front:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: card.c: Created 0 "alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" I: alsa-sink.c: Successfully opened device front:1. I: alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo). I: alsa-sink.c: Successfully enabled mmap() mode. I: alsa-sink.c: Successfully enabled timer-based scheduling mode. I: (alsa-lib)control.c: Invalid CTL front:1 I: alsa-mixer.c: Unable to attach to mixer front:1: No such file or directory I: alsa-mixer.c: Successfully attached to mixer 'hw:1' W: alsa-mixer.c: Your kernel driver is broken: it reports a volume range from 0.00 dB to 0.00 dB which makes no sense. I: module-device-restore.c: Restoring volume for sink alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo. I: sink.c: Created sink 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: sink.c: alsa.resolution_bits = "16" I: sink.c: device.api = "alsa" I: sink.c: device.class = "sound" I: sink.c: alsa.class = "generic" I: sink.c: alsa.subclass = "generic-mix" I: sink.c: alsa.name = "USB Audio" I: sink.c: alsa.id = "USB Audio" I: sink.c: alsa.subdevice = "0" I: sink.c: alsa.subdevice_name = "subdevice #0" I: sink.c: alsa.device = "0" I: sink.c: alsa.card = "1" I: sink.c: alsa.card_name = "DigiHug USB Audio" I: sink.c: alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:1a.0-1.2, full speed" I: sink.c: alsa.driver_name = "snd_usb_audio" I: sink.c: device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.1" I: sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1" I: sink.c: udev.id = "usb-FiiO_DigiHug_USB_Audio-01-Audio" I: sink.c: device.bus = "usb" I: sink.c: device.vendor.id = "1852" I: sink.c: device.vendor.name = "GYROCOM C&C Co., LTD" I: sink.c: device.product.id = "7022" I: sink.c: device.product.name = "DigiHug_USB_Audio" I: sink.c: device.serial = "FiiO_DigiHug_USB_Audio" I: sink.c: device.string = "front:1" I: sink.c: device.buffering.buffer_size = "352800" I: sink.c: device.buffering.fragment_size = "176400" I: sink.c: device.access_mode = "mmap+timer" I: sink.c: device.profile.name = "analog-stereo" I: sink.c: device.profile.description = "Analog Stereo" I: sink.c: device.description = "DigiHug_USB_Audio Analog Stereo" I: sink.c: alsa.mixer_name = "USB Mixer" I: sink.c: alsa.components = "USB1852:7022" I: sink.c: module-udev-detect.discovered = "1" I: sink.c: device.icon_name = "audio-card-usb" I: source.c: Created source 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: source.c: device.description = "Monitor of DigiHug_USB_Audio Analog Stereo" I: source.c: device.class = "monitor" I: source.c: alsa.card = "1" I: source.c: alsa.card_name = "DigiHug USB Audio" I: source.c: alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:1a.0-1.2, full speed" I: source.c: alsa.driver_name = "snd_usb_audio" I: source.c: device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.1" I: source.c: sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1" I: source.c: udev.id = "usb-FiiO_DigiHug_USB_Audio-01-Audio" I: source.c: device.bus = "usb" I: source.c: device.vendor.id = "1852" I: source.c: device.vendor.name = "GYROCOM C&C Co., LTD" I: source.c: device.product.id = "7022" I: source.c: device.product.name = "DigiHug_USB_Audio" I: source.c: device.serial = "FiiO_DigiHug_USB_Audio" I: source.c: device.string = "1" I: source.c: module-udev-detect.discovered = "1" I: source.c: device.icon_name = "audio-card-usb" I: alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms) I: alsa-sink.c: Time scheduling watermark is 20.00ms I: alsa-sink.c: Hardware volume ranges from 0 to 110. I: alsa-sink.c: Using hardware volume control. Hardware dB scale not supported. I: alsa-sink.c: Using hardware mute control. I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5. I: alsa-sink.c: Starting playback. I: module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="1" name="usb-FiiO_DigiHug_USB_Audio-01-Audio" card_name="alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1 (alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio) module loaded. I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 8000 Hz. I: alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument I: module-card-restore.c: Restoring profile for card alsa_card.usb-046d_08d7-01-U0x46d0x8d7. I: card.c: Created 1 "alsa_card.usb-046d_08d7-01-U0x46d0x8d7" I: module.c: Loaded "module-alsa-card" (index: #5; argument: "device_id="2" name="usb-046d_08d7-01-U0x46d0x8d7" card_name="alsa_card.usb-046d_08d7-01-U0x46d0x8d7" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/sound/card2 (alsa_card.usb-046d_08d7-01-U0x46d0x8d7) module loaded. I: module-udev-detect.c: Found 3 cards. I: module.c: Loaded "module-udev-detect" (index: #6; argument: ""). I: module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #8; argument: ""). I: module-default-device-restore.c: Saved default sink 'alsa_output.pci-0000_00_1b.0.analog-surround-41' not existant, not restoring default sink setting. I: module-default-device-restore.c: Saved default source 'alsa_output.pci-0000_00_1b.0.analog-surround-41.monitor' not existant, not restoring default source setting. I: module.c: Loaded "module-default-device-restore" (index: #9; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #10; argument: ""). I: module.c: Loaded "module-always-sink" (index: #11; argument: ""). I: module.c: Loaded "module-intended-roles" (index: #12; argument: ""). I: module.c: Loaded "module-suspend-on-idle" (index: #13; argument: ""). I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2" I: module.c: Loaded "module-console-kit" (index: #14; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #15; argument: ""). I: module.c: Loaded "module-cork-music-on-phone" (index: #16; argument: ""). E: module.c: Failed to open module "module-combine-sink": file not found E: main.c: Module load failed. E: main.c: Failed to initialize daemon. I: module.c: Unloading "module-device-restore" (index: #0). I: module.c: Unloaded "module-device-restore" (index: #0). I: module.c: Unloading "module-stream-restore" (index: #1). I: module.c: Unloaded "module-stream-restore" (index: #1). I: module.c: Unloading "module-card-restore" (index: #2). I: module.c: Unloaded "module-card-restore" (index: #2). I: module.c: Unloading "module-augment-properties" (index: #3). I: module.c: Unloaded "module-augment-properties" (index: #3). I: module.c: Unloading "module-alsa-card" (index: #4). I: sink.c: Freeing sink 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo" I: source.c: Freeing source 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo.monitor" I: card.c: Freed 0 "alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" I: module.c: Unloaded "module-alsa-card" (index: #4). I: module.c: Unloading "module-alsa-card" (index: #5). I: card.c: Freed 1 "alsa_card.usb-046d_08d7-01-U0x46d0x8d7" I: module.c: Unloaded "module-alsa-card" (index: #5). I: module.c: Unloading "module-udev-detect" (index: #6). I: module.c: Unloaded "module-udev-detect" (index: #6). I: module.c: Unloading "module-esound-protocol-unix" (index: #7). I: module.c: Unloaded "module-esound-protocol-unix" (index: #7). I: module.c: Unloading "module-native-protocol-unix" (index: #8). I: module.c: Unloaded "module-native-protocol-unix" (index: #8). I: module.c: Unloading "module-default-device-restore" (index: #9). I: module.c: Unloaded "module-default-device-restore" (index: #9). I: module.c: Unloading "module-rescue-streams" (index: #10). I: module.c: Unloaded "module-rescue-streams" (index: #10). I: module.c: Unloading "module-always-sink" (index: #11). I: module.c: Unloaded "module-always-sink" (index: #11). I: module.c: Unloading "module-intended-roles" (index: #12). I: module.c: Unloaded "module-intended-roles" (index: #12). I: module.c: Unloading "module-suspend-on-idle" (index: #13). I: module.c: Unloaded "module-suspend-on-idle" (index: #13). I: module.c: Unloading "module-console-kit" (index: #14). I: client.c: Freed 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2" I: module.c: Unloaded "module-console-kit" (index: #14). I: module.c: Unloading "module-position-event-sounds" (index: #15). I: module.c: Unloaded "module-position-event-sounds" (index: #15). I: module.c: Unloading "module-cork-music-on-phone" (index: #16). I: module.c: Unloaded "module-cork-music-on-phone" (index: #16). I: main.c: Daemon terminated. I believe the relevant part is this: E: module.c: Failed to open module "module-combine-sink": file not found E: main.c: Module load failed. E: main.c: Failed to initialize daemon. I tried uninstalling and reinstalling pulseaudio, I tried to find a way to install module-combine-sink. Nothing worked. I'm on a Debian Squeeze 32-bit machine. What can I do to fix this?

  Read the article

• C++ - Conway's Game of Life & Stepping Backwards

  - by Gabe

  I was able to create a version Conway's Game of Life that either stepped forward each click, or just ran forward using a timer. (I'm doing this using Qt.) Now, I need to be able to save all previous game grids, so that I can step backwards by clicking a button. I'm trying to use a stack, and it seems like I'm pushing the old gridcells onto the stack correctly. But when I run it in QT, the grids don't change when I click BACK. I've tried different things for the last three hours, to no avail. Any ideas? gridwindow.cpp - My problem should be in here somewhere. Probably the handleBack() func. #include <iostream> #include "gridwindow.h" using namespace std; // Constructor for window. It constructs the three portions of the GUI and lays them out vertically. GridWindow::GridWindow(QWidget *parent,int rows,int cols) : QWidget(parent) { QHBoxLayout *header = setupHeader(); // Setup the title at the top. QGridLayout *grid = setupGrid(rows,cols); // Setup the grid of colored cells in the middle. QHBoxLayout *buttonRow = setupButtonRow(); // Setup the row of buttons across the bottom. QVBoxLayout *layout = new QVBoxLayout(); // Puts everything together. layout->addLayout(header); layout->addLayout(grid); layout->addLayout(buttonRow); setLayout(layout); } // Destructor. GridWindow::~GridWindow() { delete title; } // Builds header section of the GUI. QHBoxLayout* GridWindow::setupHeader() { QHBoxLayout *header = new QHBoxLayout(); // Creates horizontal box. header->setAlignment(Qt::AlignHCenter); this->title = new QLabel("CONWAY'S GAME OF LIFE",this); // Creates big, bold, centered label (title): "Conway's Game of Life." this->title->setAlignment(Qt::AlignHCenter); this->title->setFont(QFont("Arial", 32, QFont::Bold)); header->addWidget(this->title); // Adds widget to layout. return header; // Returns header to grid window. } // Builds the grid of cells. This method populates the grid's 2D array of GridCells with MxN cells. QGridLayout* GridWindow::setupGrid(int rows,int cols) { isRunning = false; QGridLayout *grid = new QGridLayout(); // Creates grid layout. grid->setHorizontalSpacing(0); // No empty spaces. Cells should be contiguous. grid->setVerticalSpacing(0); grid->setSpacing(0); grid->setAlignment(Qt::AlignHCenter); for(int i=0; i < rows; i++) //Each row is a vector of grid cells. { std::vector<GridCell*> row; // Creates new vector for current row. cells.push_back(row); for(int j=0; j < cols; j++) { GridCell *cell = new GridCell(); // Creates and adds new cell to row. cells.at(i).push_back(cell); grid->addWidget(cell,i,j); // Adds to cell to grid layout. Column expands vertically. grid->setColumnStretch(j,1); } grid->setRowStretch(i,1); // Sets row expansion horizontally. } return grid; // Returns grid. } // Builds footer section of the GUI. QHBoxLayout* GridWindow::setupButtonRow() { QHBoxLayout *buttonRow = new QHBoxLayout(); // Creates horizontal box for buttons. buttonRow->setAlignment(Qt::AlignHCenter); // Clear Button - Clears cell; sets them all to DEAD/white. QPushButton *clearButton = new QPushButton("CLEAR"); clearButton->setFixedSize(100,25); connect(clearButton, SIGNAL(clicked()), this, SLOT(handlePause())); // Pauses timer before clearing. connect(clearButton, SIGNAL(clicked()), this, SLOT(handleClear())); // Connects to clear function to make all cells DEAD/white. buttonRow->addWidget(clearButton); // Forward Button - Steps one step forward. QPushButton *forwardButton = new QPushButton("FORWARD"); forwardButton->setFixedSize(100,25); connect(forwardButton, SIGNAL(clicked()), this, SLOT(handleForward())); // Signals to handleForward function.. buttonRow->addWidget(forwardButton); // Back Button - Steps one step backward. QPushButton *backButton = new QPushButton("BACK"); backButton->setFixedSize(100,25); connect(backButton, SIGNAL(clicked()), this, SLOT(handleBack())); // Signals to handleBack funciton. buttonRow->addWidget(backButton); // Start Button - Starts game when user clicks. Or, resumes game after being paused. QPushButton *startButton = new QPushButton("START/RESUME"); startButton->setFixedSize(100,25); connect(startButton, SIGNAL(clicked()), this, SLOT(handlePause())); // Deletes current timer if there is one. Then restarts everything. connect(startButton, SIGNAL(clicked()), this, SLOT(handleStart())); // Signals to handleStart function. buttonRow->addWidget(startButton); // Pause Button - Pauses simulation of game. QPushButton *pauseButton = new QPushButton("PAUSE"); pauseButton->setFixedSize(100,25); connect(pauseButton, SIGNAL(clicked()), this, SLOT(handlePause())); // Signals to pause function which pauses timer. buttonRow->addWidget(pauseButton); // Quit Button - Exits program. QPushButton *quitButton = new QPushButton("EXIT"); quitButton->setFixedSize(100,25); connect(quitButton, SIGNAL(clicked()), qApp, SLOT(quit())); // Signals the quit slot which ends the program. buttonRow->addWidget(quitButton); return buttonRow; // Returns bottom of layout. } /* SLOT method for handling clicks on the "clear" button. Receives "clicked" signals on the "Clear" button and sets all cells to DEAD. */ void GridWindow::handleClear() { for(unsigned int row=0; row < cells.size(); row++) // Loops through current rows' cells. { for(unsigned int col=0; col < cells[row].size(); col++) // Loops through the rows'columns' cells. { GridCell *cell = cells[row][col]; // Grab the current cell & set its value to dead. cell->setType(DEAD); } } } /* SLOT method for handling clicks on the "start" button. Receives "clicked" signals on the "start" button and begins game simulation. */ void GridWindow::handleStart() { isRunning = true; // It is running. Sets isRunning to true. this->timer = new QTimer(this); // Creates new timer. connect(this->timer, SIGNAL(timeout()), this, SLOT(timerFired())); // Connect "timerFired" method class to the "timeout" signal fired by the timer. this->timer->start(500); // Timer to fire every 500 milliseconds. } /* SLOT method for handling clicks on the "pause" button. Receives "clicked" signals on the "pause" button and stops the game simulation. */ void GridWindow::handlePause() { if(isRunning) // If it is running... this->timer->stop(); // Stops the timer. isRunning = false; // Set to false. } void GridWindow::handleForward() { if(isRunning); // If it's running, do nothing. else timerFired(); // It not running, step forward one step. } void GridWindow::handleBack() { std::vector<std::vector<GridCell*> > cells2; if(isRunning); // If it's running, do nothing. else if(backStack.empty()) cout << "EMPTYYY" << endl; else { cells2 = backStack.peek(); for (unsigned int f = 0; f < cells.size(); f++) // Loop through cells' rows. { for (unsigned int g = 0; g < cells.at(f).size(); g++) // Loop through cells columns. { cells[f][g]->setType(cells2[f][g]->getType()); // Set cells[f][g]'s type to cells2[f][g]'s type. } } cout << "PRE=POP" << endl; backStack.pop(); cout << "OYYYY" << endl; } } // Accessor method - Gets the 2D vector of grid cells. std::vector<std::vector<GridCell*> >& GridWindow::getCells() { return this->cells; } /* TimerFired function: 1) 2D-Vector cells2 is declared. 2) cells2 is initliazed with loops/push_backs so that all its cells are DEAD. 3) We loop through cells, and count the number of LIVE neighbors next to a given cell. --> Depending on how many cells are living, we choose if the cell should be LIVE or DEAD in the next simulation, according to the rules. -----> We save the cell type in cell2 at the same indice (the same row and column cell in cells2). 4) After check all the cells (and save the next round values in cells 2), we set cells's gridcells equal to cells2 gridcells. --> This causes the cells to be redrawn with cells2 types (white or black). */ void GridWindow::timerFired() { backStack.push(cells); std::vector<std::vector<GridCell*> > cells2; // Holds new values for 2D vector. These are the next simulation round of cell types. for(unsigned int i = 0; i < cells.size(); i++) // Loop through the rows of cells2. (Same size as cells' rows.) { vector<GridCell*> row; // Creates Gridcell* vector to push_back into cells2. cells2.push_back(row); // Pushes back row vectors into cells2. for(unsigned int j = 0; j < cells[i].size(); j++) // Loop through the columns (the cells in each row). { GridCell *cell = new GridCell(); // Creates new GridCell. cell->setType(DEAD); // Sets cell type to DEAD/white. cells2.at(i).push_back(cell); // Pushes back the DEAD cell into cells2. } // This makes a gridwindow the same size as cells with all DEAD cells. } for (unsigned int m = 0; m < cells.size(); m++) // Loop through cells' rows. { for (unsigned int n = 0; n < cells.at(m).size(); n++) // Loop through cells' columns. { unsigned int neighbors = 0; // Counter for number of LIVE neighbors for a given cell. // We know check all different variations of cells[i][j] to count the number of living neighbors for each cell. // We check m > 0 and/or n > 0 to make sure we don't access negative indexes (ex: cells[-1][0].) // We check m < size to make sure we don't try to access rows out of the vector (ex: row 5, if only 4 rows). // We check n < row size to make sure we don't access column item out of the vector (ex: 10th item in a column of only 9 items). // If we find that the Type = 1 (it is LIVE), then we add 1 to the neighbor. // Else - we add nothing to the neighbor counter. // Neighbor is the number of LIVE cells next to the current cell. if(m > 0 && n > 0) { if (cells[m-1][n-1]->getType() == 1) neighbors += 1; } if(m > 0) { if (cells[m-1][n]->getType() == 1) neighbors += 1; if(n < (cells.at(m).size() - 1)) { if (cells[m-1][n+1]->getType() == 1) neighbors += 1; } } if(n > 0) { if (cells[m][n-1]->getType() == 1) neighbors += 1; if(m < (cells.size() - 1)) { if (cells[m+1][n-1]->getType() == 1) neighbors += 1; } } if(n < (cells.at(m).size() - 1)) { if (cells[m][n+1]->getType() == 1) neighbors += 1; } if(m < (cells.size() - 1)) { if (cells[m+1][n]->getType() == 1) neighbors += 1; } if(m < (cells.size() - 1) && n < (cells.at(m).size() - 1)) { if (cells[m+1][n+1]->getType() == 1) neighbors += 1; } // Done checking number of neighbors for cells[m][n] // Now we change cells2 if it should switch in the next simulation step. // cells2 holds the values of what cells should be on the next iteration of the game. // We can't change cells right now, or it would through off our other cell values. // Apply game rules to cells: Create new, updated grid with the roundtwo vector. // Note - LIVE is 1; DEAD is 0. if (cells[m][n]->getType() == 1 && neighbors < 2) // If cell is LIVE and has less than 2 LIVE neighbors -> Set to DEAD. cells2[m][n]->setType(DEAD); else if (cells[m][n]->getType() == 1 && neighbors > 3) // If cell is LIVE and has more than 3 LIVE neighbors -> Set to DEAD. cells2[m][n]->setType(DEAD); else if (cells[m][n]->getType() == 1 && (neighbors == 2 || neighbors == 3)) // If cell is LIVE and has 2 or 3 LIVE neighbors -> Set to LIVE. cells2[m][n]->setType(LIVE); else if (cells[m][n]->getType() == 0 && neighbors == 3) // If cell is DEAD and has 3 LIVE neighbors -> Set to LIVE. cells2[m][n]->setType(LIVE); } } // Now we've gone through all of cells, and saved the new values in cells2. // Now we loop through cells and set all the cells' types to those of cells2. for (unsigned int f = 0; f < cells.size(); f++) // Loop through cells' rows. { for (unsigned int g = 0; g < cells.at(f).size(); g++) // Loop through cells columns. { cells[f][g]->setType(cells2[f][g]->getType()); // Set cells[f][g]'s type to cells2[f][g]'s type. } } } stack.h - Here's my stack. #ifndef STACK_H_ #define STACK_H_ #include <iostream> #include "node.h" template <typename T> class Stack { private: Node<T>* top; int listSize; public: Stack(); int size() const; bool empty() const; void push(const T& value); void pop(); T& peek() const; }; template <typename T> Stack<T>::Stack() : top(NULL) { listSize = 0; } template <typename T> int Stack<T>::size() const { return listSize; } template <typename T> bool Stack<T>::empty() const { if(listSize == 0) return true; else return false; } template <typename T> void Stack<T>::push(const T& value) { Node<T>* newOne = new Node<T>(value); newOne->next = top; top = newOne; listSize++; } template <typename T> void Stack<T>::pop() { Node<T>* oldT = top; top = top->next; delete oldT; listSize--; } template <typename T> T& Stack<T>::peek() const { return top->data; // Returns data in top item. } #endif gridcell.cpp - Gridcell implementation #include <iostream> #include "gridcell.h" using namespace std; // Constructor: Creates a grid cell. GridCell::GridCell(QWidget *parent) : QFrame(parent) { this->type = DEAD; // Default: Cell is DEAD (white). setFrameStyle(QFrame::Box); // Set the frame style. This is what gives each box its black border. this->button = new QPushButton(this); //Creates button that fills entirety of each grid cell. this->button->setSizePolicy(QSizePolicy::Expanding,QSizePolicy::Expanding); // Expands button to fill space. this->button->setMinimumSize(19,19); //width,height // Min height and width of button. QHBoxLayout *layout = new QHBoxLayout(); //Creates a simple layout to hold our button and add the button to it. layout->addWidget(this->button); setLayout(layout); layout->setStretchFactor(this->button,1); // Lets the buttons expand all the way to the edges of the current frame with no space leftover layout->setContentsMargins(0,0,0,0); layout->setSpacing(0); connect(this->button,SIGNAL(clicked()),this,SLOT(handleClick())); // Connects clicked signal with handleClick slot. redrawCell(); // Calls function to redraw (set new type for) the cell. } // Basic destructor. GridCell::~GridCell() { delete this->button; } // Accessor for the cell type. CellType GridCell::getType() const { return(this->type); } // Mutator for the cell type. Also has the side effect of causing the cell to be redrawn on the GUI. void GridCell::setType(CellType type) { this->type = type; redrawCell(); // Sets type and redraws cell. } // Handler slot for button clicks. This method is called whenever the user clicks on this cell in the grid. void GridCell::handleClick() { // When clicked on... if(this->type == DEAD) // If type is DEAD (white), change to LIVE (black). type = LIVE; else type = DEAD; // If type is LIVE (black), change to DEAD (white). setType(type); // Sets new type (color). setType Calls redrawCell() to recolor. } // Method to check cell type and return the color of that type. Qt::GlobalColor GridCell::getColorForCellType() { switch(this->type) { default: case DEAD: return Qt::white; case LIVE: return Qt::black; } } // Helper method. Forces current cell to be redrawn on the GUI. Called whenever the setType method is invoked. void GridCell::redrawCell() { Qt::GlobalColor gc = getColorForCellType(); //Find out what color this cell should be. this->button->setPalette(QPalette(gc,gc)); //Force the button in the cell to be the proper color. this->button->setAutoFillBackground(true); this->button->setFlat(true); //Force QT to NOT draw the borders on the button } Thanks a lot. Let me know if you need anything else.

  Read the article

• Questions about TinyMCE. Or suggestions on a compariable product.

  - by chobo2

  Hi I am using jquery 1.3.2 and asp.net mvc 1.0. Originally I was using some other rich html editor but I ran into one major problem when a user pasted in text from open office or MS office it would bring along tons of styling junk. If a user like wrote one sentence what was like 25 characters and pasted that into my current html editor the count would 25,000 characters and I don't want to store all that junk( I can't afford to). So tinyMCE seems to not have this problem. However I got some questions. It seems if you want to use for commercial use(what my site is but currently is not making very much at this time) you need to get a commercial license. However it does not say if it is free or if it will cost money. I am assuming it means that you will have to pay but I would like to confirm this. So do you have to pay for a license to use tinyMCe if your using it for commercial use? (Yes/ No) ------------------ Answer the following questions if you said "no" to the first question ----------- So would I use the jQuery package then or is it better to use the other versions? What is this .net compressor zip for? Do I need it? I only want a few of the buttons(like bold,font size) can I remove the other buttons? It seems to display a word count. Can it be changed to character count? ----------------- Answer the following question if you said "yes" to the first question -------- Is there a rich html editor that is free for commercial use and preferably for jquery that can remove the junk that office programs seem to bring along? This is a test to show how much formatting gets made. • One • Two • Three The above text when copied into my current rich html editor will have all this code with it. <meta http-equiv="Content-Type" content="text/html; charset=utf-8"><meta name="ProgId" content="Word.Document"><meta name="Generator" content="Microsoft Word 12"><meta name="Originator" content="Microsoft Word 12"><link rel="File-List" href="file:///C:%5CUsers%5Cchobo2%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_filelist.xml"><link rel="themeData" href="file:///C:%5CUsers%5Cchobo2%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_themedata.thmx"><link rel="colorSchemeMapping" href="file:///C:%5CUsers%5Cchobo2%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_colorschememapping.xml"><!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w:PunctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:DoNotPromoteQF/> <w:LidThemeOther>EN-US</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w:DontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w:DontVertAlignCellWithSp/> <w:DontBreakConstrainedForcedTables/> <w:DontVertAlignInTxbx/> <w:Word11KerningPairs/> <w:CachedColBalance/> </w:Compatibility> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="&#45;-"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" DefUnhideWhenUsed="true" DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267"> <w:LsdException Locked="false" Priority="0" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Normal"/> <w:LsdException Locked="false" Priority="9" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="heading 1"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 2"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 3"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 4"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 5"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 6"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 7"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 8"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 9"/> <w:LsdException Locked="false" Priority="39" Name="toc 1"/> <w:LsdException Locked="false" Priority="39" Name="toc 2"/> <w:LsdException Locked="false" Priority="39" Name="toc 3"/> <w:LsdException Locked="false" Priority="39" Name="toc 4"/> <w:LsdException Locked="false" Priority="39" Name="toc 5"/> <w:LsdException Locked="false" Priority="39" Name="toc 6"/> <w:LsdException Locked="false" Priority="39" Name="toc 7"/> <w:LsdException Locked="false" Priority="39" Name="toc 8"/> <w:LsdException Locked="false" Priority="39" Name="toc 9"/> <w:LsdException Locked="false" Priority="35" QFormat="true" Name="caption"/> <w:LsdException Locked="false" Priority="10" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Title"/> <w:LsdException Locked="false" Priority="1" Name="Default Paragraph Font"/> <w:LsdException Locked="false" Priority="11" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/> <w:LsdException Locked="false" Priority="22" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Strong"/> <w:LsdException Locked="false" Priority="20" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/> <w:LsdException Locked="false" Priority="59" SemiHidden="false" UnhideWhenUsed="false" Name="Table Grid"/> <w:LsdException Locked="false" UnhideWhenUsed="false" Name="Placeholder Text"/> <w:LsdException Locked="false" Priority="1" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading Accent 1"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List Accent 1"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid Accent 1"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/> <w:LsdException Locked="false" UnhideWhenUsed="false" Name="Revision"/> <w:LsdException Locked="false" Priority="34" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/> <w:LsdException Locked="false" Priority="29" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Quote"/> <w:LsdException Locked="false" Priority="30" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 1"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 1"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading Accent 2"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List Accent 2"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid Accent 2"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 2"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 2"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading Accent 3"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List Accent 3"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid Accent 3"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 3"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 3"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading Accent 4"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List Accent 4"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid Accent 4"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 4"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 4"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading Accent 5"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List Accent 5"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid Accent 5"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 5"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 5"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading Accent 6"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List Accent 6"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid Accent 6"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 6"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 6"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/> <w:LsdException Locked="false" Priority="19" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/> <w:LsdException Locked="false" Priority="21" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/> <w:LsdException Locked="false" Priority="31" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/> <w:LsdException Locked="false" Priority="32" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/> <w:LsdException Locked="false" Priority="33" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Book Title"/> <w:LsdException Locked="false" Priority="37" Name="Bibliography"/> <w:LsdException Locked="false" Priority="39" QFormat="true" Name="TOC Heading"/> </w:LatentStyles> </xml><![endif]--><style> <!-- /* Font Definitions */ @font-face {font-family:Wingdings; panose-1:5 0 0 0 0 0 0 0 0 0; mso-font-charset:2; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:0 268435456 0 0 -2147483648 0;} @font-face {font-family:"Cambria Math"; panose-1:2 4 5 3 5 4 6 3 2 4; mso-font-charset:0; mso-generic-font-family:roman; mso-font-pitch:variable; mso-font-signature:-1610611985 1107304683 0 0 415 0;} @font-face {font-family:Calibri; panose-1:2 15 5 2 2 2 4 3 2 4; mso-font-charset:0; mso-generic-font-family:swiss; mso-font-pitch:variable; mso-font-signature:-520092929 1073786111 9 0 415 0;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-unhide:no; mso-style-qformat:yes; mso-style-parent:""; margin-top:0in; margin-right:0in; margin-bottom:10.0pt; margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph {mso-style-priority:34; mso-style-unhide:no; mso-style-qformat:yes; margin-top:0in; margin-right:0in; margin-bottom:10.0pt; margin-left:.5in; mso-add-space:auto; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} p.MsoListParagraphCxSpFirst, li.MsoListParagraphCxSpFirst, div.MsoListParagraphCxSpFirst {mso-style-priority:34; mso-style-unhide:no; mso-style-qformat:yes; mso-style-type:export-only; margin-top:0in; margin-right:0in; margin-bottom:0in; margin-left:.5in; margin-bottom:.0001pt; mso-add-space:auto; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} p.MsoListParagraphCxSpMiddle, li.MsoListParagraphCxSpMiddle, div.MsoListParagraphCxSpMiddle {mso-style-priority:34; mso-style-unhide:no; mso-style-qformat:yes; mso-style-type:export-only; margin-top:0in; margin-right:0in; margin-bottom:0in; margin-left:.5in; margin-bottom:.0001pt; mso-add-space:auto; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} p.MsoListParagraphCxSpLast, li.MsoListParagraphCxSpLast, div.MsoListParagraphCxSpLast {mso-style-priority:34; mso-style-unhide:no; mso-style-qformat:yes; mso-style-type:export-only; margin-top:0in; margin-right:0in; margin-bottom:10.0pt; margin-left:.5in; mso-add-space:auto; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} .MsoChpDefault {mso-style-type:export-only; mso-default-props:yes; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} .MsoPapDefault {mso-style-type:export-only; margin-bottom:10.0pt; line-height:115%;} @page Section1 {size:8.5in 11.0in; margin:1.0in 1.0in 1.0in 1.0in; mso-header-margin:.5in; mso-footer-margin:.5in; mso-paper-source:0;} div.Section1 {page:Section1;} /* List Definitions */ @list l0 {mso-list-id:184250744; mso-list-type:hybrid; mso-list-template-ids:-1412819028 67698689 67698691 67698693 67698689 67698691 67698693 67698689 67698691 67698693;} @list l0:level1 {mso-level-number-format:bullet; mso-level-text:?; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-.25in; font-family:Symbol;} ol {margin-bottom:0in;} ul {margin-bottom:0in;} --> </style><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} </style> <![endif]--> <p class="MsoNormal">This is a test to show <b style="">how</b> much formatting gets made.</p> <p class="MsoListParagraphCxSpFirst" style="text-indent: -0.25in;"><!--[if !supportLists]--><span style="font-family: Symbol;"><span style="">·<span style="font: 7pt &quot;Times New Roman&quot;;">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><!--[endif]-->One</p> <p class="MsoListParagraphCxSpMiddle" style="text-indent: -0.25in;"><!--[if !supportLists]--><span style="font-family: Symbol;"><span style="">·<span style="font: 7pt &quot;Times New Roman&quot;;">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><!--[endif]-->Two</p> <p class="MsoListParagraphCxSpMiddle" style="text-indent: -0.25in;"><!--[if !supportLists]--><span style="font-family: Symbol;"><span style="">·<span style="font: 7pt &quot;Times New Roman&quot;;">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><!--[endif]-->Three</p> <p class="MsoListParagraphCxSpLast"><o:p>&nbsp;</o:p></p>

  Read the article

< Previous Page | 184 185 186 187 188