Search Results

Search found 10719 results on 429 pages for 'hardware failure'.

Page 189/429 | < Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >

• VMFS recovery - how do you proceed?

  - by ToreTrygg

  The more I look into ESX the more often i have to handle cases where the partition table of a disk with a VMFS volume gets corrupted. The reasons for this can be * idiot user * failed update * power failure * .... I guess you guys must already have something like a usual procedure on how to work through this cases. I am especially interested in a straight fast way to find out if the VMFS volume itself is corrupted beyond repair. So far I use very time consuming attempts with scans with Testdisk and similar tools. Do you have better / faster ways ?

  Read the article

• Firefox 3.5.6 causes entire computer to freeze

  - by Anthony Aziz

  Here's the situation: Environment: Just installed a fresh copy of Win7 Pro 32-bit to NTFS partition on 750GB SATA drive Hardware: E8400 3GHz ASUS P5QL Pro 4GB DDR2 1066 RAM EVGA 9800 GTX+ Plenty of cooling, no problems with hardware before Data is stored on a separate partition, including My Documents No security software is yet installed No extensions installed yet Problem: While using Firefox, sometimes the entire computer will freeze/hang. I get no mouse or keyboard input, can't CTRL+ALT+DEL, no "not responding" indication, just a static image on my display. My drivers are all up to date as far as I'm aware (I just installed this copy of Windows last week). I first noticed this when trying to install Xmarks. I went to the Xmarks site and tried to install and it would freeze. I managed to get it installed (Safe mode and the Mozilla addon site worked), but when I go to configure it (log in, etc), the computer freezes. I don't think it's a matter of usage time or memory issues, because while testing, I browsed wallpaper galleries for about 30 minutes, sometimes as many as 12-15 tabs open at a time, without issue. Sometimes I won't even try to install Xmarks at it will hang. I can install (some) other extensions, the only one I've tried is download status bar (which works). What I've done to try to fix: Restarted (duh) Windows safe mode Completely remove Firefox and install it to a new directory, according to Mozilla's KB (I haven't tried the profile manager, though I assume this does the same thing, except perhaps more thoroughly) Some BIOS changes, including Power options, disabling oveclocking (it was a modest overclock on the CPU, which has run Win7 beta and RC for almost a year now) Memtest Used another Windows user profile, same tragic results I'm STUCK now, with no idea what to do. I'm using Chrome as my main browser at the moment, but that's not something I want to be stuck with. I like Firefox and want to use it. I'm going to try creating a new profile first. One thing I did notice: I started leaving task manager and performance monitor open when anticipating (but dreading) a freeze. firefox.exe had low CPU and low memory, but it looked like overall disk usage was seeing some spikes on the small graph Performance Monitor gives you. I saw on one blog post a fellow using XP moved his Local Settings directory from a separate drive to his main drive, and that solved it, but I don't think my AppData directory is on my D: drive, and that's on the same physical device anyways. Still, something that might be worth trying. I'd extremely appreciate any help. Thanks very much. I really don't want to reinstall Windows from scratch again :( Anthony Aziz

  Read the article

• How do I install ant on OS X Mavericks?

  - by Robert Karl

  After upgrading to OS X 10.9 Mavericks, ant is no longer on my path. [126] 11:23:26 rkarl-mba-4:~/mobile-baselayer > ant zsh: permission denied: ant [126] 11:23:50 rkarl-mba-4:~/mobile-baselayer > which ant ant not found I tried installing through homebrew [126] 11:23:09 rkarl-mba-4:~/mobile-baselayer > brew install ant Error: No available formula for ant It's odd that homebrew doesn't have a formula for that.... After googling, I found this article, which suggested using a user's custom formula for brew. [1] 11:23:56 rkarl-mba-4:~/mobile-baselayer > brew install https://raw.github.com/adamv/homebrew-alt/master/duplicates/ant.rb curl: (22) The requested URL returned error: 404 Not Found Error: Failure while executing: /usr/bin/curl -f#LA Homebrew\ 0.9.4\ (Ruby\ 1.8.7-358;\ Mac\ OS\ X\ 10.9) https://raw.github.com/adamv/homebrew-alt/master/duplicates/ant.rb -o /Library/Caches/Homebrew/Formula/ant.rb Any help would be appreciated!

  Read the article

• How to set up a mini call center?

  - by Ralph

  I'm trying to figure out how to set up a miniature call center for a small business. Like, for 1-4 people to take calls, but hopefully expandable to more. We want to accept nation-wide calls, and then I guess distribute the calls among the available agents. If no one is available, I guess it should either put them in a queue and play some annoying music for them, or forward to call to an agent who has least-recently taken a call who can then quickly answer and say "please hold" until they're done their call. We want to have one phone number that customers can call. I guess we then need some kind of ACD system which would take each call and forward it to an agent based on some algorithm? Then we would need to purchase a separate phone line for each agent, plus one just for the distributor? Or do we need several "extra" lines to maintain a queue (one for each customer waiting too)? This "ACD" thing, is it just a device that you would plug a phone line into (or several?), and maybe connect to a computer, aided by some software? Or is a subscription thing that I would need from my local telephone provider? Next, the business we're running, the callers will be repeat customers. It would be helpful to automatically pull up their profile based on the incoming number. The "software" our agents will be running will just be a website where they can log in (preferably from home) and then enter some information they would obtain through the call. So, the system would have to somehow interface with the website if possible. If not, we'll just have to ask each customer for an identifier (phone number, username, customer number, or something). Is this possible? I guess each computer would need a device that the call would pass through, and then if I can somehow hook into that, then I can write some software that will interface with the site. So, where do I start? What hardware do we need to buy? What subscriptions do we need? We were thinking this magicJack might help us in accepting long-distance calls for cheaper, but my understanding is that they provide you with some weird-looking number, is there a way we could "mask" it with our toll-free number? And then pass the incoming calls through the distributor system, which would then get passed to the call-accepting device which would both allow an agent to answer the call and have a software hook? (I realize this might be partially out of the scope of SU, but I wasn't sure where else to ask. It is about computer(-aided) hardware and software anyway.) P.S.: I don't need any of that "press 1 to talk to..." or "say xyz to..." junk. Just a straight-forward, connect-to-next-available-agent system.

  Read the article

• Samba: session setup failed: NT_STATUS_LOGON_FAILURE

  - by stivlo

  I tried to set up Samba with "unix password sync", but I still get logon failure. I am running Ubuntu Natty Narwhal. $ smbclient -L localhost Enter stivlo's password: session setup failed: NT_STATUS_LOGON_FAILURE Here is my /etc/samba/smb.conf [global] workgroup = obliquid server string = %h server (Samba, Ubuntu) dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d security = user encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user [www] path = /var/www browsable = yes read only = no create mask = 0755 After modifying I restarted the servers: $ sudo restart smbd $ sudo restart nmbd However I still can't logon with my Unix username and password. Can anyone please help? Thank you in advance!

  Read the article

• Windows 7 Enterprise MAK needs Reactivation?

  - by chris

  I have a VMware image that contains our "standard workstation" where I do a lot of testing. I used a Windows 7 Enterprise MAK key (from MSDN) for activation because the doc said that MAK keys don't have to be reactivated when the hardware changes. Activation was done with slmgr.vbs /ipk LICENSE-KEY slmgr.vbs /ato Now after some testing where the virtual hw was changed it says it "needs to activate because the hw has changed". What did I do wrong?

  Read the article

• How do I solve MSSQL 2008 install error, "The MOF compiler could not connect with the WMI server"?

  - by nbolton

  Possibly related to: SQL Server 2008 Install fails error reading etwcls.mof After manually removing MSSQL 2008 from my system (uninstall failed to remove two instances), I receive the following error when trying to re-install: The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start. It seems that mofcomp is failing with one of the .mof files, but I'm not sure which, or why. Digging through the connect article gave some indications, but no solution. I've run winmgmt /salvagerepository, which returns "WMI repository is consistent". Currently, I'm unable to install MSSQL 2008. Please help!

  Read the article

• Problem virtualizing Ubuntu 10.04 32 bit on VirtualBox 3.1 on Windows Vista 64 bit

  - by Adam Siddhi

  Software & Hardware Setup Host System : Windows Vista Home Premium SP1 64 bit Guest : Ubuntu 10.04 (ubuntu-10.04-desktop-i386.iso) 32 bit VM : VirtualBox 3.1.8 Hardware : Intel Core 2 Duo T6400 4GB SDRAM What Happened I followed the tutorial called Installing Ubuntu inside Windows using VirtualBox located here: www.psychocats.net/ubuntu/virtualbox At first I downloaded ubuntu-10.04-desktop-amd64.iso because I figured that it would be a perfect fit with my Vista 64 OS. I was wrong because it turns out the my Intel Core 2 Duo T6400 CPU does not have Intel® Virtualization Technology. So I had to go with the ubuntu-10.04-desktop-i386.iso which is 32 bit. This got me to the point where I could actually create the Ubuntu VM. So I set up the VM in VirtualBox (according to the tutorial I was following) to prepare for the Ubuntu 10.04 virtualization. Please go to my Picassa web album to see the screen shots of my VM settings and Ubuntu boot process so you can see what I experienced (they appear in the order that I experienced them in). www.picasaweb.google.com/rubysiddhi/ProblemVirtualizingUbuntu100432BitOnVirtualBox31OnWindowsVista64# The first 17 images show the VM settings. The last 8 show my attempt at virtualizing Ubuntu 10.04. You can see booting up but ultimately failing. The Specifics The one error message I got was: (process:210): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0) It appeared on a black screen that sort of looked like a Windows console screen but with out the c:\ or the ability to type. Then this error message got more complex when tons of text appeared in the screen. Pictures 23 - 25 in the album show this text. I should also mention that I found this post in the Ubuntu forums by zonination who seemed to have similar problems to mine even though they had a different set up. The main issue I think zonination and me may be having is the fact that we can not change the color mode to 32 bit while it is booting. I think the 16 bit color mode maybe making Ubuntu fail. Not certain though. Well I hope I explained my problem thoroughly and clearly. Thanks for the tutorial. It got me started but, now I hope to finish this process so I can start developing in Ubuntu. OH by the way if you want to actually see what happened play by play (with some classical in the background) check out the video I made over here: http://www.youtube.com/watch?v=XMbbm5E_0Xw Thanks! Regards, Adam

  Read the article

• heimdal kerberos in openldap issue

  - by Brian

  I think I posted this on the wrong 'sister site', so here it is. I'm having a bit of trouble getting Kerberos (Heimdal version) to work nicely with OpenLDAP. The kerberos database is being stored in LDAP itself. The KDC uses SASL EXTERNAL authentication as root to access the container ou. I created the database in LDAP fine using kadmin -l, but it won't let me use kadmin without the -l flag: root@rds0:~# kadmin -l kadmin> list * krbtgt/REALM kadmin/changepw kadmin/admin changepw/kerberos kadmin/hprop WELLKNOWN/ANONYMOUS WELLKNOWN/org.h5l.fast-cookie@WELLKNOWN:ORG.H5L default brian.empson brian.empson/admin host/rds0.example.net ldap/rds0.example.net host/localhost kadmin> exit root@rds0:~# kadmin kadmin> list * brian.empson/admin@REALM's Password: <----- With right password kadmin: kadm5_get_principals: Key table entry not found kadmin> list * brian.empson/admin@REALM's Password: <------ With wrong password kadmin: kadm5_get_principals: Already tried ENC-TS-info, looping kadmin> I can get tickets without a problem: root@rds0:~# klist Credentials cache: FILE:/tmp/krb5cc_0 Principal: brian.empson@REALM Issued Expires Principal Nov 11 14:14:40 2012 Nov 12 00:14:37 2012 krbtgt/REALM@REALM Nov 11 14:40:35 2012 Nov 12 00:14:37 2012 ldap/rds0.example.net@REALM But I can't seem to change my own password without kadmin -l: root@rds0:~# kpasswd brian.empson@REALM's Password: <---- Right password New password: Verify password - New password: Auth error : Authentication failed root@rds0:~# kpasswd brian.empson@REALM's Password: <---- Wrong password kpasswd: krb5_get_init_creds: Already tried ENC-TS-info, looping kadmin's logs are not helpful at all: 2012-11-11T13:48:33 krb5_recvauth: Key table entry not found 2012-11-11T13:51:18 krb5_recvauth: Key table entry not found 2012-11-11T13:53:02 krb5_recvauth: Key table entry not found 2012-11-11T14:16:34 krb5_recvauth: Key table entry not found 2012-11-11T14:20:24 krb5_recvauth: Key table entry not found 2012-11-11T14:20:44 krb5_recvauth: Key table entry not found 2012-11-11T14:21:29 krb5_recvauth: Key table entry not found 2012-11-11T14:21:46 krb5_recvauth: Key table entry not found 2012-11-11T14:23:09 krb5_recvauth: Key table entry not found 2012-11-11T14:45:39 krb5_recvauth: Key table entry not found The KDC reports that both accounts succeed in authenticating: 2012-11-11T14:48:03 AS-REQ brian.empson@REALM from IPv4:192.168.72.10 for kadmin/changepw@REALM 2012-11-11T14:48:03 Client sent patypes: REQ-ENC-PA-REP 2012-11-11T14:48:03 Looking for PK-INIT(ietf) pa-data -- brian.empson@REALM 2012-11-11T14:48:03 Looking for PK-INIT(win2k) pa-data -- brian.empson@REALM 2012-11-11T14:48:03 Looking for ENC-TS pa-data -- brian.empson@REALM 2012-11-11T14:48:03 Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ 2012-11-11T14:48:03 sending 294 bytes to IPv4:192.168.72.10 2012-11-11T14:48:03 AS-REQ brian.empson@REALM from IPv4:192.168.72.10 for kadmin/changepw@REALM 2012-11-11T14:48:03 Client sent patypes: ENC-TS, REQ-ENC-PA-REP 2012-11-11T14:48:03 Looking for PK-INIT(ietf) pa-data -- brian.empson@REALM 2012-11-11T14:48:03 Looking for PK-INIT(win2k) pa-data -- brian.empson@REALM 2012-11-11T14:48:03 Looking for ENC-TS pa-data -- brian.empson@REALM 2012-11-11T14:48:03 ENC-TS Pre-authentication succeeded -- brian.empson@REALM using aes256-cts-hmac-sha1-96 2012-11-11T14:48:03 ENC-TS pre-authentication succeeded -- brian.empson@REALM 2012-11-11T14:48:03 AS-REQ authtime: 2012-11-11T14:48:03 starttime: unset endtime: 2012-11-11T14:53:00 renew till: unset 2012-11-11T14:48:03 Client supported enctypes: aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-cbc-sha1, arcfour-hmac-md5, using aes256-cts-hmac-sha1-96/aes256-cts-hmac-sha1-96 2012-11-11T14:48:03 sending 704 bytes to IPv4:192.168.72.10 2012-11-11T14:45:39 AS-REQ brian.empson/admin@REALM from IPv4:192.168.72.10 for kadmin/admin@REALM 2012-11-11T14:45:39 Client sent patypes: REQ-ENC-PA-REP 2012-11-11T14:45:39 Looking for PK-INIT(ietf) pa-data -- brian.empson/admin@REALM 2012-11-11T14:45:39 Looking for PK-INIT(win2k) pa-data -- brian.empson/admin@REALM 2012-11-11T14:45:39 Looking for ENC-TS pa-data -- brian.empson/admin@REALM 2012-11-11T14:45:39 Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ 2012-11-11T14:45:39 sending 303 bytes to IPv4:192.168.72.10 2012-11-11T14:45:39 AS-REQ brian.empson/admin@REALM from IPv4:192.168.72.10 for kadmin/admin@REALM 2012-11-11T14:45:39 Client sent patypes: ENC-TS, REQ-ENC-PA-REP 2012-11-11T14:45:39 Looking for PK-INIT(ietf) pa-data -- brian.empson/admin@REALM 2012-11-11T14:45:39 Looking for PK-INIT(win2k) pa-data -- brian.empson/admin@REALM 2012-11-11T14:45:39 Looking for ENC-TS pa-data -- brian.empson/admin@REALM 2012-11-11T14:45:39 ENC-TS Pre-authentication succeeded -- brian.empson/admin@REALM using aes256-cts-hmac-sha1-96 2012-11-11T14:45:39 ENC-TS pre-authentication succeeded -- brian.empson/admin@REALM 2012-11-11T14:45:39 AS-REQ authtime: 2012-11-11T14:45:39 starttime: unset endtime: 2012-11-11T15:45:39 renew till: unset 2012-11-11T14:45:39 Client supported enctypes: aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-cbc-sha1, arcfour-hmac-md5, using aes256-cts-hmac-sha1-96/aes256-cts-hmac-sha1-96 2012-11-11T14:45:39 sending 717 bytes to IPv4:192.168.72.10 I wish I had more detailed logging messages, running kadmind in debug mode seems to almost work but it just kicks me back to the shell when I type in the correct password. GSSAPI via LDAP doesn't work either, but I suspect it's because some parts of kerberos aren't working either: root@rds0:~# ldapsearch -Y GSSAPI -H ldaps:/// -b "o=mybase" o=mybase SASL/GSSAPI authentication started ldap_sasl_interactive_bind_s: Other (e.g., implementation specific) error (80) additional info: SASL(-1): generic failure: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information () root@rds0:~# ldapsearch -Y EXTERNAL -H ldapi:/// -b "o=mybase" o=mybase SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 # extended LDIF <snip> Would anyone be able to point me in the right direction?

  Read the article

• Using SSL on slapd

  - by Warren

  I am setting up slapd to use SSL on Fedora 14. I have the following in my /etc/openldap/slapd.d/cn=config.ldif: olcTLSCACertificateFile: /etc/pki/tls/certs/SSL_CA_Bundle.pem olcTLSCertificateFile: /etc/pki/tls/certs/mydomain.crt olcTLSCertificateKeyFile: /etc/pki/tls/private/mydomain.key olcTLSCipherSuite: HIGH:MEDIUM:-SSLv2 olcTLSVerifyClient: demand and the following in my /etc/sysconfig/ldap: SLAPD_LDAP=no SLAPD_LDAPS=yes In my ldap.conf file, I have BASE dc=mydomain,dc=com URI ldaps://localhost TLS_CACERTDIR /etc/pki/tls/certs TLS_REQCERT allow However, when I connect to the localhost, ldapsearch returns the following: ldap_initialize( <DEFAULT> ) ldap_create Enter LDAP Password: ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP localhost:636 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 127.0.0.1:636 ldap_pvt_connect: fd: 3 tm: -1 async: 0 TLS: loaded CA certificate file /etc/pki/tls/certs/978601d0.0 from CA certificate directory /etc/pki/tls/certs. TLS: loaded CA certificate file /etc/pki/tls/certs/b69d4130.0 from CA certificate directory /etc/pki/tls/certs. TLS certificate verification: defer TLS: error: connect - force handshake failure: errno 0 - moznss error -12271 TLS: can't connect: . ldap_err2string ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1) What do I have incorrect?

  Read the article

• Coreinfo reports i7-3770 CPU doesn't support EPT (aka SLAT) and VMX

  - by Toro

  Here is the output: Coreinfo v3.05 - Dump information on system CPU and memory topology Copyright (C) 2008-2012 Mark Russinovich Sysinternals - www.sysinternals.com Note: Coreinfo must be executed on a system without a hypervisor running for accurate results. Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz Intel64 Family 6 Model 58 Stepping 9, GenuineIntel HYPERVISOR * Hypervisor is present VMX - Supports Intel hardware-assisted virtualization EPT - Supports Intel extended page tables (SLAT) According to Intel the CPU does have a VMX and EPT support.

  Read the article

• windows server 2003 R2 64bit not seeing more than 4gb ram

  - by Mo

  shouldn't win 2003 R2 64bit see more than 4gb by default or am I missing a setting somewhere? hardware is SuperMicro X6DVA-EG. http://msdn.mzicrosoft.com/en-us/library/aa366778%28VS.85%29.aspx#physical_memory_limits_windows_server_2003

  Read the article

• Cannot receive email outside domain with Microsoft Exchange

  - by Adi

  This morning we couldn't receive email from outside our company's domain (domain.com.au), but we can send email to outside (e.g hotmail, gmail, yahoo). When I tried to send email to my work email address using my gmail account, I received this message Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 Unable to relay for [email protected] (state 14). I tried using telnet to send email, and it works. But still I couldn't figure out why I can't receive email from outside. I'm not sure if I provided enough info. I'll try to provide as much info as needed to help me solve the problem. Thanks

  Read the article

• What type of Multimeter is safe to use on computers?

  - by Ssvarc

  In "Upgrading and Repairing PC's - 18th edition" by Scott Mueller on pg. 1278 he discusses multimeters. "You should only use a DMM (digital multimeter) instead of the older needle-type multimeters because the older meters work by injecting 9V into the circuit when measuring resistance, which damages most computer circuits. A DMM uses a much smaller voltage (usually 1.5V) when making resistance measurements, which is safe for electronic equipment." Most DMM's that I've looked at have 9V batteries. Are they internally stepping down the voltage used when making these measurements? Wouldn't the concern of injecting 9V be true when measuring continuity as well? A little off topic, there is a fascinating way to test for laptop screen inverter failure, (http://www.fonerbooks.com/test.htm), is anyone aware of a safe DMM that is capable of this as well?

  Read the article

• Install IIS windows 7

  - by rad

  I have tried many way to install IIS in my Windows 7 Professionnel environment. And I have always an error. I tried with Web Plateform Api - "Fatal Error during installation" With Windows Features in configuration pannel - "An error has occurred. Not all of the features were successfully" With command line (http://forums.iis.net/t/1152513.aspx) - "Fatal Error during installation" in log file I have IIS.log : [04/10/2012 16:13:25] "C:\Windows\SysWOW64\inetsrv\aspnetca.exe" /install /basic 2.0.50727.0 [04/10/2012 16:13:25] < !!FAIL!! RegOpenKeyEx(HKLM\SYSTEM\CurrentControlSet\Services\ASP.NET_2.0.50727\Names) result=0x80070002 [04/10/2012 16:13:25] < !!FAIL!! SetAccessToPerfCountersKeys() result=0x80070002 [04/10/2012 16:13:25] < !!FAIL!! Installation failure, result=0x80070002 If I uninstall/reinstall IIS, I have some error but my site run correctly, and after windows restart, the install is rollbacked and I lose my installation. Any help ?

  Read the article

• APCUPSD and Hyper V R2

  - by Jason Berg

  I'm about to deploy a Windows Server 2008 R2 machine with the Hyper V role. I'd like to get away from having to use a network management card with my APC UPS as I'm only shutting down 1 server (it just seems like an unneeded point of failure). I'd like to look into using apcupsd instead. Will this work properly if I use a serial connection? Have you got it working yourself? How is the SNMP monitoring? I really like being able to easily monitor my UPS with SNMP when powerchute is installed. Will I be sacrificing this completely? Is the network management card really the way to go with this? If so, why? Bonus question: Is there a better UPS out there that I should be recommending in the future?

  Read the article

• Deactivate dead OCS 2007 R2 Edge Server?

  - by slashp

  I'm having a surprising issue where our old OCS 2007 R2 Edge server died of hardware failure (no backup) in the middle of our move to Lync. How can I forcefully remove the Edge server from the organization without being able to deactivate the role from the server itself? I've noticed the correct procedure for uninstalling OCS 2007 R2 is as follows: If you are removing an Edge Server, a Mediation Server, an Archiving Server, or a Monitoring Server, remove the Office Communications Server 2007 R2 components in the following sequence: Microsoft Office Communications Server 2007 R2 Edge Server Microsoft Office Communications Server 2007 R2 Mediation Server Microsoft Office Communications Server 2007 R2 Archiving Server Microsoft Office Communications Server 2007 R2 Monitoring Server Microsoft Office Communications Server 2007 R2 Core Components Microsoft Office Communications Server 2007 R2 Unified Communications Managed API 2.0 Core Redistribution package And to deactivate an Edge server: http://technet.microsoft.com/en-us/library/dd572832(v=office.13).aspx Any advice would be greatly appreciated.

  Read the article

• BSOD - probably video card prob

  - by Shimmy

  I'm receiving the following BSOD: I've tried installing the latest driver from nVidia (296.10), but it says "NVIDIA installer cannot continue", "The graphics driver could not find compatible graphics hardware.": I installed it manually at device manager, but problem still occurs. The problem does not happen in safe mode at all. Note: After restarting the computer when seeing this BSOD, the BIOS welcome screen is full of random black dots spread around: Any solutions? Update: I've tried disabling Aero by following this guide, but that didn't help.

  Read the article

• Full screen flash lags on Windows 7

  - by Chmod

  I have been experiencing an issue since I've up upgraded to Windows 7 where all flash videos have horrible frame rates when run in full screen mode. I have tried multiple browsers and i have the latest version of flash and video drivers. I have tried re-installing flash and disabling hardware acceleration. The problem occurs on youtube and hulu. This is a clean install on a Core 2 duo with 4GB RAM and an Nvidia 8400M GS.

  Read the article

• How to reduce timeout for bad password on disconnected laptop?

  - by Elroy Flynn

  I use a Windows 7 laptop computer. When not attached to my AD domain, if I enter an incorrect password, I have to wait approximately a full minute before the failure response comes back. When attached to the domain, the response is instant. I think that what's happening is that is that when my entry fails against the cached pw, Windows tries to reach the domain controller and the timeout for that operation is about 60s. Is there a registry entry that controls the timeout? I'd love to reduce it.

  Read the article

• How can I set audit controls on files owned by TrustedInstaller using Powershell?

  - by Drise

  I am trying to set audit controls on a number of files (listed in ACLsWin.txt) located in \%Windows%\System32 (for example, aaclient.dll) using the following Powershell script: $FileList = Get-Content ".\ACLsWin.txt" $ACL = New-Object System.Security.AccessControl.FileSecurity $AccessRule = New-Object System.Security.AccessControl.FileSystemAuditRule("Everyone", "Delete", "Failure") $ACL.AddAuditRule($AccessRule) foreach($File in $FileList) { Write-Host "Changing audit on $File" $ACL | Set-Acl $File } Whenever I run the script, I get the error PermissionDenied [Set-Acl] UnauthorizedAccessException. This seems to come from the fact that the owner of these files is TrustedInstaller. I am running these scripts as Administrator (even though I'm on the the built-in Administrator account) and it's still failing. I can set these audit controls by hand using the Security tab, but there are at least 200 files for which doing by hand may lead to human errors. How can I get around TrustedInstaller and set these audit controls using Powershell?

  Read the article

• Problem with testsaslauthd and kerberos5 ("saslauthd internal error")

  - by danorton

  The error message “saslauthd internal error” seems like a catch-all for saslauthd, so I’m not sure if it’s a red herring, but here’s the brief description of my problem: This Kerberos command works fine: $ echo getprivs | kadmin -p username -w password Authenticating as principal username with password. kadmin: getprivs current privileges: GET ADD MODIFY DELETE But this SASL test command fails: $ testsaslauthd -u username -p password 0: NO "authentication failed" saslauthd works fine with "-a sasldb", but the above is with "-a kerberos5" This is the most detail I seem to be able to get from saslauthd: saslauthd[]: auth_krb5: krb5_get_init_creds_password: -1765328353 saslauthd[]: do_auth : auth failure: [user=username] [service=imap] [realm=] [mech=kerberos5] [reason=saslauthd internal error] Kerberos seems happy: krb5kdc[](info): AS_REQ (4 etypes {18 17 16 23}) 127.0.0.1: ISSUE: authtime 1298779891, etypes {rep=18 tkt=18 ses=18}, username at REALM for krbtgt/DOMAIN at REALM I’m running Ubuntu 10.04 (lucid) with the latest updates, namely: Kerberos 5 release 1.8.1 saslauthd 2.1.23 Thanks for any clues.

  Read the article

• PAM_LDAP error trying to bind ?

  - by billyduc

  I have this error when I ssh to my LDAP client using the login name on the LDAP server my LDAP client's running Ubuntu 9.10 Karmic my LDAP server is Fedora Core 4 and running Fedora Directory Server ssh [email protected] cat /var/log/auth.log //on the client Dec 18 10:24:17 ubuntu-ltsp sshd[4527]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=billyhost.local user=billyduc Dec 18 10:24:17 ubuntu-ltsp sshd[4527]: pam_ldap: error trying to bind as user "uid=billyduc,dc=mydomain,dc=com" (Invalid credentials) Dec 18 10:24:18 ubuntu-ltsp sshd[4527]: Failed password for billyduc from 192.168.5.121 port 51449 ssh2 Here's my /etc/pam.d/sshd cat /etc/pam.d/sshd auth [success=1 default=ignore] pam_unix.so auth required pam_ldap.so use_first_pass auth required pam_permit.so account sufficient pam_permit.so I also edit my /etc/ssh/sshd_config in both client and Server PasswordAuthentication yes So I think something wrong with the password when the ssh server do checking

  Read the article

• DNS Piority in home-use Routers

  - by DucDigital

  Force DNS on router instead of ClientSide DNS like OpenDNS or GooglePublicDNS Im trying to implement some site blocking using DNS, the hardware is simple Routers like Linksys and Netgear that you use in house for family purpose. Currently I tried to set a computer to opendns, while my router set to something else, when check using opendns.com/welcome, the computer is identified as opendns. and Vice versa, this time the computer didn't identified as opendns. Is it posible to force user to use our DNS instead of their setting DNS?

  Read the article

• DNS Piority in home-use Routers

  - by DucDigital

  Force DNS on router instead of ClientSide DNS like OpenDNS or GooglePublicDNS Im trying to implement some site blocking using DNS, the hardware is simple Routers like Linksys and Netgear that you use in house for family purpose. Currently I tried to set a computer to opendns, while my router set to something else, when check using opendns.com/welcome, the computer is identified as opendns. and Vice versa, this time the computer didn't identified as opendns. Is it posible to force user to use our DNS instead of their setting DNS?

  Read the article

< Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >