Search Results

Search found 10719 results on 429 pages for 'hardware failure'.

Page 192/429 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

• Ubuntu Server 12.04 LTS on Hyper-V 2012

  - by user137533

  I have the following scenario: Hyper-V 2012 server core installation. On top of this i created a virtual machine on which i tried installing Ubuntu Server 12.04 which should not have any compatibility issues according to what Microsoft and Ubuntu are saying (although it is not officially supported). I start, run the installation and everything is ok, no problems detecting the network device or the hard drive (unlike debian which didn't even detect the hard drive). Once the installation is complete it asks me to reboot, it unmounts the "dvd drive" and reboots. Once it tries to start again i get the following error: Boot failure. Reboot and Select proper Boot device or Insert Boot Media in the selected Boot device. It seems to not be booting up from the virtual hard drive. The hard drive is set up in SCSI mode, nothing mounted on the IDE controller (no iso image or anything else. Does anyone have any ideas on what i can do to solve this?

  Read the article

• Sending email using SMTP (Gmail) from Hudson CI

  - by jensendarren

  How can I set up Hudson CI so that I can send out emails from the server following a build failure? At the moment all I get is the following error: com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.0 Must issue a STARTTLS command first One solution is to start Hudson as follows: java -Dmail.smtp.starttls.enable="true" -jar /usr/share/hudson/hudson.war However, I am already using the following to start Hudson: sudo /etc/init.d/hudson start I am thinking the solution is to somehow set the system property mail.smtp.starttls.enable in a property file somewhere, but I have no idea how to do that. What are my options? Thank you all in advance!

  Read the article

• Anybody have experience with using Nexenta?

  - by churnd

  I'm evaluating the Nexenta platform to hopefully one day replace our legacy file servers. I would primarily use it as a CIFS server in an Active Directory environment. Anyone out there have any experience using it? Good? Bad? Which hardware vendor did you go with? Why? Did you build your own (Supermicro) or go prebuilt?

  Read the article

• How to create .iso from Snow Leopard retail DVD

  - by user10580

  I have a legal copy of Snow Leopard on DVD (retail) which I am attempting to use to create a bootable flash drive. The software I have been directed to use requests a .iso file (as I am familiar with from other os installs), but when inserting the DVD into either Windows 7 or Ubuntu 9.10 the disk is recognized only as a "Windows Support" DVD, with materials to "support Apple hardware with Windows." This is eventually intended for a hackintosh attempt on an ASUS EEEPC 1000HE netbook. This is an install disk. Thanks

  Read the article

• Email is stuck in the queue with 421 4.2.2 Connection dropped due to SocketError

  - by e0594cn

  We recently installed an Exchange 2010 Server and we are having some problems sending emails to certain domains. Email is stuck in the queue with 421 4.2.2 Connection dropped due to SocketError. Any Suggestion? The below is the message when using telnet command: EHLO etla.com.cn 250-aa6061.com Hello [58.215.221.50] 250-TURN 250-SIZE 15360000 250-ETRN 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-8bitmime 250-BINARYMIME 250-CHUNKING 250-VRFY 250-X-EXPS GSSAPI NTLM LOGIN 250-X-EXPS=LOGIN 250-AUTH GSSAPI NTLM LOGIN 250-AUTH=LOGIN 250-X-LINK2STATE 250-XEXCH50 250 OK MAIL FROM:[email protected] 250 2.1.0 [email protected] OK RCPT TO:[email protected] NOTIFY=success,failure **550 5.7.1 Your email messages have been blocked by the recipient OR by Trend Mic ro Email Reputation Service. Contact the recipient or his/her administrator usin g alternate means to resolve the issue.**

  Read the article

• Installing Windows server 2008 on not VT system

  - by Shahid

  I have a Dell Inspiron 1440 laptop and it has no virtualization support, i want to install Windows Server 2008 on it using Virtual Box, i know that we can install Mac OS on not Virtualization supported system using some patch. I also haired that Virtual box don't needs hardware virtualization, it will do that using software virtualization. how can i achieve that, any guidance would be very nice. Thanks

  Read the article

• Mac OS X Server 10.6.6 DNS not responding properly, get a "Truncated, retrying in TCP mode" for subdomain

  - by Eric Arseneau

  If I do an nslookup on youtube.com, no problem, if I do one with www.youtube.com, failure. See details below. [~] nslookup youtube.com Server: 192.168.1.1 Address: 192.168.1.1#53 Non-authoritative answer: Name: youtube.com Address: 74.125.127.93 Name: youtube.com Address: 74.125.47.93 Name: youtube.com Address: 74.125.95.93 [~] nslookup www.youtube.com ;; Truncated, retrying in TCP mode. ;; Connection to 192.168.1.1#53(192.168.1.1) for www.youtube.com failed: connection refused. If I do the same from a Windows machine its fine, its when I do it from a Mac workstation that I get the issue. I have rebooted, both server and workstation, I did a changeip, but nothing is working. Any recommendations?

  Read the article

• Shouldn't WP8 Emulator Work With an Intel Q9650?

  - by Al Bundy

  My comp is as follows: -Windows 8 Pro -Visual Studio 12 Pro -Asus P5Q Pro Turbo -Intel Q9650 (Core 2 Quad 3.0 Ghz) As far as I can tell, this setup should support Windows Phone 8 Emulator, but When I installed Windows Phone 8 SDK, it said that my computer doesn't support hardware virtualization. It says here that it does: http://ark.intel.com/products/35428/Intel-Core2-Quad-Processor-Q9650-(12M-Cache-3_00-GHz-1333-MHz-FSB)

  Read the article

• "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

  - by anjanesh

  I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

  Read the article

• Bladecenter-E Power Module fault

  - by Lihnjo

  We have problem on IBM Bladecenter-E Critical Events Power module 2 is off. DC fault. Power module 4 is off. DC fault. Warnings and System Events Insufficient chassis power to support redundancy What is the best solution for this problem? Thanks AMM Service Data Help SPAPP Capture Available 10/13/2010 17:03:47 1090347 bytes Time: 11/19/2012 11:02:31 UUID: 42E1 5D2F D7BF 41A6 A4A2 48D1 3FB7 0540 MAC Address xx:xx:xx:xx:xx:xx MM Information Name: nnnnn Contact: aaa, bbb, ccc, England Location: [email protected] IP address: 111.222.333.444 Date Time Information GMT offset: +1:00 - Central Europe Time (Western Europe, Algeria, Nigeria, Angola) Adjust for DST: Yes NTP: Enabled NTP Hostname/IP: 111.222.333.444 System Health: Critical System Status Summary One or more monitored parameters are abnormal. Critical Events Power module 2 is off. DC fault. Power module 4 is off. DC fault. Warnings and System Events Insufficient chassis power to support redundancy CHASSIS (BladeCenter-E) in CHASSIS slot: 01 TopoPath is "CHASSIS[1]". Description : BladeCenter-E Width : 1 Sub Type : BladeCenter (BC) Power Mode : 220 v KVM Owner : CHASSIS[1]/BLADE[9] MT Owner : CHASSIS[1]/MGMT_MOD[1] Component Type : CHASSIS Inventory: VPD ID: 336 (decimal) POS ID EXT: 0 (decimal) POS ID: 8 (decimal) Machine Type/Model: 86773RG Machine Serial Number: 99ZL816 Part Number: 39R8561 FRU Number: 39R8563 FRU Serial Number: YK109174W1HV Manufacturer ID: IBM Hardware Revision: 3 (decimal) Manufacture Date: 18 (wk), 07 (yr) UUID: 42E1 5D2F D7BF 41A6 A4A2 48D1 3FB7 0540 (hex) Type Code: 97 (decimal) Sub-type Code: 0 (decimal) IANA Num: 336 (decimal) Product ID: 8 (decimal) Manufacturer Sub ID: FOXC Enviroment data: -------------- Type: : POWER_USAGE Unit: : WATTS Reading: : 0xa Sensor Label: : Midplane Sensor ID: : 0x0 MGMT MOD (Advanced Management Module) in MGMT_MOD slot: 01 TopoPath is "CHASSIS[1]/MGMT_MOD[1]". Description : Advanced Management Module Name : kant Width : 1 Component Role : Primary Component Type : MGMT MOD Insert Time : 28050132 Inventory: VPD ID: 288 (decimal) POS ID EXT: 0 (decimal) POS ID: 4 (decimal) Part Number: 39Y9659 FRU Number: 39Y9661 FRU Serial Number: YK11836CE2RC Manufacturer ID: IBM Hardware Revision: 4 (decimal) Manufacture Date: 50 (wk), 06 (yr) UUID: 1D95 9937 8CA5 11DB 9499 0014 5EDF 1C98 (hex) Type Code: 81 (decimal) Sub-type Code: 1 (decimal) IANA Num: 20301 (decimal) Product ID: 65 (decimal) Manufacturer Sub ID: ASUS Firmware data: Type : AMM firmware Build ID : BPET50P File Name : CNETCMUS.PKT Release Date : 03/26/2010 Release Level : 50 Revision - Major: 80 Port info: ======================================================== Topology Path ID : 1 Label : External Phy Orientation : EXTERNAL Port Number : 1 Type : MGT Physical Meidum : Copper Number of Link Intferfaces : 1 ------------------------------------ Link Ifc ID Number : 1 Link Ifc Transport Protocol : ENET Link Ifc Addr Type : MAC Link Ifc Burned-in Addr : xx:xx:xx:xx:xx:xx Link Ifc Admin Addr : 00:00:00:00:00:00 Link Ifc Addr in use : xx:xx:xx:xx:xx:xx ---------------------------------------------------------- Configuration behaviors: Save Only Enviroment data: -------------- Type: : TEMPERATURE Unit: : DEGREES_C Reading: : 38.00 Sensor Label: : MM Ambient Sensor ID: : 0x0 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +4.81 Sensor Label: : +5V Sensor ID: : 0x1b -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +3.26 Sensor Label: : +3.3V Sensor ID: : 0x19 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +11.97 Sensor Label: : +12V Sensor ID: : 0x16 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : -4.88 Sensor Label: : -5V Sensor ID: : 0x1e -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +2.47 Sensor Label: : +2.5V Sensor ID: : 0x18 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +1.76 Sensor Label: : +1.8V Sensor ID: : 0x15 -------------- Type: : POWER_USAGE Unit: : WATTS Reading: : 0x19 Sensor Label: : kant Sensor ID: : 0x0

  Read the article

• Linux networking crash: best steps to find out the cause?

  - by Aron Rotteveel

  One of our Linux (CentOS) servers was unreachable last night. The server was not reachable in any way except for the remote console. After logging in with the remote console, it turned out I could not ping any outside hosts either. A simple service network restart solved the issue, but I am still wondering what could have caused this. My log files seem to indicate no error at all (except for the various daemons that need a network connection and failed after the network failure). Are there any additional steps I can take to find out the cause of this problem? EDIT: this just happened again. The server was completely unresponsive until I issued a networking service restart. Any advise is welcome. Could this be caused by a faulty hardware component? As per Madhatters request, here are some excerpts from the log at the time (the network crashed at 20:13): /var/log/messages: Dec 2 20:01:05 graviton kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=<stripped> SRC=<stripped> DST=<stripped> LEN=40 TOS=0x00 PREC=0x00 TTL=101 ID=256 PROTO=TCP SPT=6000 DPT=3306 WINDOW=16384 RES=0x00 SYN URGP=0 Dec 2 20:01:05 graviton kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=<stripped> SRC=<stripped> DST=<stripped> LEN=40 TOS=0x00 PREC=0x00 TTL=100 ID=256 PROTO=TCP SPT=6000 DPT=3306 WINDOW=16384 RES=0x00 SYN URGP=0 Dec 2 20:01:05 graviton kernel: Firewall: *TCP_IN Blocked* IN=eth0 OUT= MAC=<stripped> SRC=<stripped> DST=<stripped> LEN=40 TOS=0x00 PREC=0x00 TTL=101 ID=256 PROTO=TCP SPT=6000 DPT=3306 WINDOW=16384 RES=0x00 SYN URGP=0 Dec 2 20:13:34 graviton junglediskserver: Connection to gateway failed: xGatewayTransport - Connection to gateway failed. The first three messages are simple responses to iptables rules I have set up through the LFD firewall. The last message indicates that JungleDisk, which I use for backups can no longer connect to the gateway. Apart from this, there are no interesting messages around this time. EDIT 4 dec: as per Mattdm's request, here is the output of ethtool eth0: (Please not that these are the settings that currently work. If things go wrong again, I will be sure to post this again if necessary. Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: d Link detected: yes As per Joris' request, here is also the output of route -n: aron@graviton [~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xx.xx.xx.58 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.42 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.43 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.41 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.46 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.47 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.44 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.45 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.50 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.51 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.48 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.49 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.54 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.52 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.53 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.0 0.0.0.0 255.255.255.192 U 0 0 0 eth0 xx.xx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 xx.xx.xx.62 0.0.0.0 UG 0 0 0 eth0 The bottom xx.62 is my gateway. EDIT december 28th: the problem occurred again and I got the chance to compare some of the outputs of the above tests. What I found out is that arp -an returns an incomplete MAC address for my gateway (which is not under my control; the server is in a shared rack): During failure: ? (xx.xx.xx.62) at <incomplete> on eth0 After service network restart: ? (xx.xx.xx.62) at 00:00:0C:9F:F0:30 [ether] on eth0 Is this something I can fix or is it time for me to contact the data centre?

  Read the article

• F3-F5 keys incorrectly behaving as audio keys

  - by obvio171

  I don't know if this is a configuration issue or a hardware issue, but I have a Kinesis Advantage USB keyboard and for some reason the F3-F5 keys aren't responding as they used to. They don't respond to anything and, when I tried using F5 on Emacs, it said <XF86AudioNext> is undefined, so I guess it's a weird mapping problem. Any idea how I could remap them to the original meaning?

  Read the article

• MegaCLI always returns blank output

  - by JamesHannah

  This server is a Dell R200 running Ubuntu 8.04LTS using a LSI SAS1068E raid card supplied from Dell, I suspect that there might be some kind of RAID issue with the hardware raid built into the motherboard, but I can't seem to get MegaCLi to return any useful output: root@81 $ ./MegaCli -AdpAllInfo -aALL root@81 $ ./MegaCli -PDList -aALL root@81 $ The disks work and AFAIK the raid software is installed correctly. I've seen this issue on RedHat issues also in the past. The RAID was initially setup through the BIOS on this server and appears to be functioning fine apart from this.

  Read the article

• Temperature monitoring on Dell Precision M4500 under Linux: sensors-detect doesn't, what next?

  - by Tikitu

  I have a Dell Precision M4500, Intel Core i5 CPU, running Linux (Ubuntu Lucid), and would like to keep an eye on CPU temperature. I've tried lm-sensors: sensors-detect didn't find any sensors; following its hint ("This is relatively common on laptops, where thermal management is handled by ACPI rather than the OS.") I tried acpi -V but got nothing thermal. The Gnome panel applet "Hardware Sensors Monitor" reports on GPU temperature but nothing else. What should I be trying next?

  Read the article

• Does Windows 7 RC handle non Windows Media Center remotes yet?

  - by zillion

  I'm mostly a Linux geek, but while I will be trying to make my first Arch Linux installation in a virtual machine to learn and make my installation script for the true install, I need a simple OS and Windows 7 was better than Windows XP Media Center cause Media Center is outdated on XP. I tested it has a beta but my Hauppauge wintv-pvr usb2 remote wasn't working but the tv-tuner worked well and I haven't tested Windows XP Mode and my printer Epson Stylus Photo R300. Do someone know this hardware and if the XP Mode is easily supported?

  Read the article

• How do I solve MSSQL 2008 install error, "The MOF compiler could not connect with the WMI server"?

  - by nbolton

  Possibly related to: SQL Server 2008 Install fails error reading etwcls.mof After manually removing MSSQL 2008 from my system (uninstall failed to remove two instances), I receive the following error when trying to re-install: The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start. It seems that mofcomp is failing with one of the .mof files, but I'm not sure which, or why. Digging through the connect article gave some indications, but no solution. I've run winmgmt /salvagerepository, which returns "WMI repository is consistent". Currently, I'm unable to install MSSQL 2008. Please help!

  Read the article

• How do I remove Xen kernel and put normal kernel on RHEL 5

  - by yan bellavance

  I have 3 identical machines (hardware wise) that all have RHEL 5.3 installed. 2 of those machines have the Xen kernel and one doesnt. I cannot install nvidia drivers on the ones that have the xen kernel and so I was wondering how I managed to do this and how to replace them with normal kernels. Could this of happened during install time when for example I was queried on certain components to install? (development,virtualization, webserver)

  Read the article

• XP OEM licensing when reinstalling Windows XP

  - by mindas

  My wife has managed to buy a Dell laptop she was using at her ex-employer that just went bust. The problem with it is the OS (Windows XP) which takes ages to boot and is generally disproportionally slow to the hardware of the machine. So my aim is to sacrifice a day and reinstall it. The problem I am slightly worried about is the licensing/registration/activation hell. Apart from the sticker (with WinXP license key), the laptop has no other paperwork proving this license is legitimate. I believe this was originally an OEM license. Unfortunately, I don't have the the installation CD. This computer also has MS Office installed (which I would like to retain) but it none of MS Office apps would launch due to some obscure error complaining about lack of free disk space (which computer has plenty of). I have absolutely no clue what kind of license this MS Office was. And because the company has gone into the administration, there is no way of getting this information nor installable media. I believe that by buying the hardware I have also acquired the software which I can use as I see fit. Correct me if I'm wrong. Above said, my question would be: What is the easiest way of reinstalling the XP? By easiest I mean avoiding spending my time to prove Microsoft support I've got the right to use the software (insert your computer says noooo joke here) but still being able to get to fresh virgin activated legal state of the XP. I used to work as a sysadmin many years ago so I am not afraid of any technical difficulties. The same question applies to MS Office. I imagine the process would consist of backing up all the data, pulling some bits from the registry and using that on the fresh install. As for reinstall I'd expect to use some sort of OEM Windows repair CD from Dell, right? Are those freely available? My other box (HP) has such a thing and it can't be used on any other brand. I'm sure somebody had to go through this licensing hell and could share his/her tips. Thanks in advance.

  Read the article

• Laptop Tracking System

  - by Guy Thomas

  Is there any software / hardware to track a laptop? Could you put something in your laptop that would identify it's location if a thief turned it on and connected to the internet?

  Read the article

• Cyrus: How Do I Configure saslauthd For Authentication?

  - by Nick

  I'm trying to get Cyrus IMAP (v 2.2 on Ubuntu 9.04) setup and working, but I'm having a bit of trouble getting the login working correctly. I've created a mailbox for my test user "nrahl": cm user/nrahl and then created a password: $ saslpasswd2 nrahl I'm attempting to connect to the mailbox using Thunderbird. I'm using the machine's LAN IP address as the host, and "nrahl" as the username. It connects to the server and prompts me for the password. When I enter it, I get "Login to server failed." in Thunderbird, and /var/log/mail.log shows: Apr 15 19:20:01 IMAP cyrus/imap[1930]: accepted connection Apr 15 19:20:09 IMAP cyrus/imap[1930]: badlogin: [192.168.5.21] plaintext nrahl SASL(-13): authentication failure: checkpass failed Part of /etc/imapd.conf with comments removed: sieveusehomedir: false sievedir: /var/spool/sieve #mailnotifier: zephyr #sievenotifier: zephyr #dracinterval: 0 #drachost: localhost hashimapspool: true allowplaintext: yes sasl_mech_list: PLAIN #allowapop: no #sasl_maximum_layer: 256 #loginrealms: example.com #virtdomains: userid #defaultdomain: sasl_pwcheck_method: saslauthd #sasl_auxprop_plugin: sasldb sasl_auto_transition: no UPDATE: When setting: sasl_pwcheck_method: alwaystrue in /etc/imapd.conf, login works correctly. So I'm assuming the issue is saslauthd related.

  Read the article

• Computer can't boot

  - by zETO

  I have a 1 year old PC and the last weeks, when I press the ON button the PC doesn't power on ( Like I didn't press the ON button ). I have to plug and unplug a few times the power cord in order to make it work. At the start this happened once in 10 boots. Now it happens much more frequently to the point that when I press the power on button it never even opens if I don't do the cord switch thingy. Very rarely also, the PC shut downs for no reason and no warning, even when idle. The important fact to note here is, the green light on the motherboard is always on, even when the PC doesn't power on. What should I do? Is it a Power Supply failure or a motherboard? My power supply is a high end corsair model, AX850 and my motherboard a high end ASUS.

  Read the article

• Windows 8 - When AC Power is disconnected, atibtmon.exe throws a Runtime error

  - by Junior Mayhé

  The installer is not working for my ATI mobility Radeon HD 3670 on Dell XPS Studio 16 using Windows 8 PRO 64 bits. Here are the screenshots of my ATI Radeon configuration: Hardware configuration Software configuration And here is the problem on Windows 8: everytime I disconnect the AC power cord, atibtmon.exe throws a runtime error as follows What could I do to avoid this error? I have installed the legacy driver http://support.amd.com/us/kbarticles/Pages/catalystlegacywin8.aspx but this installer fails (when trying to install the driver).

  Read the article

• One domain hiding two servers

  - by George DSeas

  For our SaaS web-app we have two identical servers in two geographically separated data centers. FOO_1 is the production server and does real-time (MySQL master-slave) replication to its backup F00_2. We want our users to always go to THEFOO.COM which somehow points to the production server. So even if FOO_1 dies, we can just switch THEFOO.COM to redirect to FOO_2 so the failure is transparent. This switch can be manual or automatic but without failback (if FOO_1 somehow becomes available again). Is there a way to do this with DNS? I am getting stuck with ANAME and CNAMEs configuration. We don't use sub-domains, just straight domains. If not, what are other options? Does it make sense to just have a web server at LOVELY_FOO.COM and just redirect all traffic? I also looked at load balancers but didn't see a solution for across data centers/network providers.

  Read the article

• Unable to install sbs 2008 in DELL POWEREDGE T100 [closed]

  - by Swaminathan Shanmugam

  Still unable to install WIN SBS 2008 in DELL POWEREDGE T100 server and the long post is going on at http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/aa1bc4b0-943e-4ada-8de1-e03161c8fc2c My problem is unable to install sbs 2008 in 500 GB 4k sectors hdd but installation is successful in 512 bytes sector hdd. Anybody please help to solve this issue? Installation of SBS 2008 proceeds ; atlast it is not getting completed with the error message "Windows Setup could not configure Windows on this computer’s hardware"

  Read the article

• Oracle Enterprise Manager Logs

  - by idea_

  Hi, I'm attempting to investigate the root cause of the following error which occurs each time a users call an Oracle 10g Forms applet: FRM-92102: A network error has occurred. The Forms Client has attempted to reestablish its connection to the Server 1 time(s) without success. Please check the network connection and try again later. Details... Java Exception: java.io.IOException: Connection failure with 503 This error remained after restarting all my system components: HTTP_Server, OC4J_BI_Forms, Web Cache, Reports Server, etc. The only way to clear this issue was to restart the server entirely. During the downtime, web pages were rendered with the PL/SQL cartridge and being served, so it appears as though this was isolated to forms. Does anybody know which log files may provide clues here? Any help would be much appreciated :) Update: If somebody can provide me with a way or reference to increase the capacity of my web server to minimize these errors, I will accept this as the solution.

  Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >