Search Results

Search found 6018 results on 241 pages for 'terminal emulator'.

Page 189/241 | < Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >

• How do I get OBDII software working?

  - by NoBugs

  I have an ODBII USB cable for vehicle diagnostics, unfortunately I haven't been able to get it working on Ubuntu 12.04. The closest I've come is using the VAG-COM software with wine, using the ln -s /dev/ttyUSB0 ~/.wine/dosdevices/com1 trick and running stty -F /dev/ttyUSB0 speed 9600 repeatedly. It will connect and show the vehicle is OBDII, but none of the useful features seem to be working. I tried: Scantool - says it's connecting to the /dev/device in terminal, but doesn't. obdgpslogger - times out all the time. pyobd - This seems to be the most up-to-date source I could find, I had to adjust the code a bit to work (see here for changes). Still, in obd_io.py interpret_result function, it says it's looking for 4 space separated numbers, where the usb-serial is receiving bogus code "0100" instead? The device shows up in lsusb as: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Is the problem that these native tools don't expect a USB serial, or a serial of this type? Or are these apps too old to recognize OBD2 of this vehicle?

  Read the article

• Make the sound louder in Lubuntu

  - by Andrew

  I have a Toshiba r835 running Lubuntu 11.10. Turning the volume slider up all the way doesn't give very loud sound. I've tried typing alsamixer in a terminal and turning up all the levels there to maximum, but the speakers are still fairly quiet. Is there a simple way to increase maximum volume in software? I understand that there are physical limits to the sound the laptop's speakers can produce, but I suspect my maximum volume is limited by software. EDIT: This is exactly the type of solution I'm looking for. However, it doesn't work for me. What I did: sudo pico /etc/asound.conf This file does not exist, so I create a new one, containing: pcm.!default { type plug slave.pcm "softvol" } pcm.softvol { type softvol slave { pcm "dmix" } control { name "Pre-Amp" card 0 } min_dB -5.0 max_dB 20.0 resolution 6 } I reboot the machine, and type alsamixer. I use my left/right arrow keys to inspect the various volume options. I expect to see a new option, called Pre-Amp, but I don't see one. This fix seems to work for other people. Why doesn't this fix work for me?

  Read the article

• Internal Mic not working on Dell Adamo 13

  - by AFD

  So I'm using Elementary Luna Beta (based on Ubuntu 12.04 LTS) on a spare HDD after successfully using Jupiter release (based on 10.10) for many years. In Jupiter I had my internal mic work out of the box and with Skype installed from deb it was all setup without having to step foot inside the terminal. In Luna Beta the internal mic is not recognised by the OS and so also not recognised by Skype. I believe the hardware is this (from sudo lshw): *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:46 memory:f8600000-f8603fff As well as this I ran cat /proc/asound/card0/codec* | grep Codec which gave me: Codec: IDT 92HD73C1X5 Codec: Intel Cantiga HDMI How do I tweak Luna to get this hardware working properly? I'm able to switch out my Luna HDD with the Jupiter HDD to help troubleshoot what the differences are between the two and why the more recent OS can't find / use the mic correctly. Thanks in advance for any help you can give.

  Read the article

• How do I start Ubuntu without X server?

  - by Kaare Mikkelsen

  So, I'm trying to install the official nVidia drivers for my fancy graphics card, and they advice disabling the X server before installing, as well as making sure that I can boot without the X server, so as not to wreck anything. However, I seem to be doing something wrong. As I understand it, this should be as simple as changing the runlevel from 2 to 1? (I am aware that all this may simply be me not understanding runlevels) If that is correct, a quick test should be simply typing "sudo init 1" or "sudo telinit 1" in a terminal? Doing that makes the system attempt to shutdown, only it stops at the purple screen with the ubuntu logo and 5 white dots underneath. I haven't observed it get anywhere from there, I always end up holding down the power button. "sudo telinit 3" has not visible effect. Alternatively, I should be able to get there using the recovery mode, activated through the grub menu? I have very little success with that. After picking recovery mode, I am faced with a set of options about how to proceed. Both choosing the one with "network enabled" and "text only", I get a dialog explaining that this will mount my / file system in read/write mode, and whether this is what I want. I choose yes, and it seems to report that my drive is fine (there's a single line of text detailing the state of the partition). And then it stops. I haven't tried letting it sit for more than a few minutes, but presumably this process should be comparable in duration to a regular boot? I am not particularly fond of messing with any .conf-files until I am certain that I can handle things with training wheels on. So, I guess there are two questions: the one in the title, and "how do I start a text-only session without changing defaults?" Thanks in advance :)

  Read the article

• Workaround for an Xcode/iOS SDK Issue...

  - by Joe Huang

  Hi, everyone: When you are doing ADF Mobile development, and you need to deploy the application to an iOS device, you would need to compile/deploy the app with iOS App Certificates and Provisioning Profile. This means you would need to "Deploy to Package" or "Deploy to iTunes" during deployment, and configure JDeveloper with the proper certificates/profiles. In some instances (exact combination is still not clear), deploy and signing the application to generate the ipa file may fail with similar error message at the end of the deployment log: [01:04:45 PM] Deployment failed due to one or more errors returned by '/usr/bin/xcrun'. The following is a summary of the returned error(s): Command-line execution failed (Return code: 1) error: /usr/bin/codesign --force --preserve-metadata=identifier,entitlements,resource-rules --sign iPhone Distribution: Oracle Corporation --resource-rules=/var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app/ResourceRules.plist --entitlements /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/entitlements_plistEINPBkIG /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app failed with error 1. Output: /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app: replacing existing signature Program /usr/bin/codesign returned 1 : [/var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app: replacing existing signature This issue is a known issue and is not related to ADF Mobile. The workaround is discussed in this article from StackOverflow. This article refers to the old location of Xcode, so you would need to adjust the paths accordingly. The path for Xcode 4.3 and above would be like: /Applications/Xcode.app/Contents//Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/PackageApplication to this script file. To modify it, you probably can’t use Text Editor. I end up opening a terminal session, changed the file permission, and used vi to update it. Thanks, Oracle ADF Mobile Product Management Team

  Read the article

• KVM not installed?

  - by NJRandy

  When I run virt-manager, and click on the icon to create a new virtual machine, I get an error that KVM is not installed or is not loaded. I use Ubuntu GNOME 14.04 All qemu packages are version 2.0.0+dfsg-2ubuntu1 qemu-kvm and many other qemu packages installed... libvirt packages: 1.2.2-0ubuntu13.1 libvirt0 libvirt-bin libvirt-doc python-libvirt virt-manager 0.9.5-1ubuntu3 When I open terminal and enter lsmod | grep kvm I get nothing returned. No lines showing kvm or kvm_amd and no error of any kind. Hardware: Tyan S2877 with dual Opteron 285s I have the latest bios and don't see any setting in there to turn virtualization on or off. when I run sudo apt-get -s install qemu-kvm Here are the results: Reading package lists... Done Building dependency tree Reading state information... Done qemu-kvm is already the newest version. The following packages were automatically installed and are no longer required: kde-l10n-engb libgtk2-gladexml-perl libqt4-test libvncserver0 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. @jobin: the problem was my hardware. I just bought it a few months ago, although obviously used LOL

  Read the article

• Upgrade from Linux Mint 12 to Kubuntu 12.04?

  - by MountainX

  Is there an "easy" way to "upgrade" my existing Linux Mint 12 install to Kubuntu 12.04 beta 2? I know I could reinstall. Usually I would do a clean install to avoid unexpected issues. But in this case, I don't have time to reconfigure everything from my printers to my installed software, so I am looking for the quick/easy way, but I also want to avoid big risks of an upgrade gone wrong. I'm hoping to just change some repos and run a few commands from the terminal. I don't mind editing a few config files as long as I can find good HOWTOs. But I don't want to be the pioneer (arrows in back). I'm hoping someone has done this before and has a set of steps. For context, I recently installed KDE 4.8 SC onto Kubuntu 11.10 using PPAs. This was on another computer. That wasn't a problem. But I decided to do a fresh install of Kubuntu 12.04 later. I like it well enough that I want to change my other computer from Linux Mint 12 to Kubuntu. (I'm going all-in with KDE. It's now my desktop of choice.) This Linux Mint upgrade will be a move from Gnome and MGSE to KDE, so that will probably complicate things at bit compared to something like upgrading Kubuntu 11.10 to KDE 4.8. References: http://www.psychocats.net/ubuntu/kde Is it safe to install Kubuntu-desktop in 11.10?

  Read the article

• Problem installing drivers for Brother DCP-1400

  - by ToddB

  I have a problem installing drivers for my DCP-1400 printer. I am using Ubuntu 11.10 and am new to Ubuntu and Linux in general. I downloaded the lpr and cupswrapper files from the Brother linux site into my Download directory. I next run Terminal and switch to the Downloads directory. At the prompt I type in the following: sudo dpkg -i --force-all dcp1400lpr-1.1.2-1.386.deb It asks for my password which I type in and press Enter. I get the following errors: (Reading database ... 155195 files and directories currently installed.) Preparing to replace dcp1400lpr 1.1.2-1 (using dcp1400lpr-1.1.2-1.i386.deb) ... Unpacking replacement dcp1400lpr ... /var/lib/dpkg/info/dcp1400lpr.postrm: 3: /etc/init.d/lpd: not found dpkg: warning: subprocess old post-removal script returned error exit status 127 dpkg - trying script from the new package instead ... /var/lib/dpkg/tmp.ci/postrm: 3: /etc/init.d/lpd: not found dpkg: error processing dcp1400lpr-1.1.2-1.i386.deb (--install): subprocess new post-removal script returned error exit status 127 /var/lib/dpkg/tmp.ci/postrm: 3: /etc/init.d/lpd: not found dpkg: error while cleaning up: subprocess new post-removal script returned error exit status 127 Errors were encountered while processing: dcp1400lpr-1.1.2-1.i386.deb I now notice when I open the Synaptics package manager I get the message: E: The package dcp1400lpr needs to be reinstalled, but I can't find an archive for it. E: Internal error opening cache (1). Please report. Any help provided would be appreciated. Thank you TB

  Read the article

• Bash script runs fine, but not in cron

  - by radiotech

  I have a script that's supposed to record a shoutcast stream for an hour, convert it to mp3, and then save it. The script runs correctly when I run it from the terminal, but I can't seem to get it to run in cron (where it should run every hour at the top of the hour). Here's the line in crontab: 0 * * * * /medialib/tech/bin/recordstream 2>&1 >> /medialib/tech/cron.log and here's the script: #!/bin/bash name="$(date +%s)" mp3_name=$name.mp3 wav_name=$name.wav timeout -sHUP 60m vlc -I dummy --sout "#transcode{channels=2}:std{access=file,mux=wav,dst=/medialib/stream_backup/wav/$wav_name" /medialib/tech/lib/listen.m3u lame --mp3input /medialib/stream_backup/wav/$wav_name /medialib/stream_backup/$mp3_name rm /medialib/stream_backup/wav/$wav_name Thank you! EDIT: Contents of cron.log (This text has been in the log file since it was transferred from an old server where it was working). VLC media player 2.0.8 Twoflower Command Line Interface initialized. Type `help' for help. > Shutting down. VLC media player 2.0.8 Twoflower Command Line Interface initialized. Type `help' for help. > Shutting down.

  Read the article

• ERP/CRM Systems. Desktop Based ? Web based?

  - by Parhs

  Hello guys... I have seen 2-3 ERPs in action. I am wondering what is better. Desktop based application or webbased displayed on a browser. My first expirience was with a web based ERP when i was 14 years old.. It was web based and terribly slow... For most simple task you had to do lots of clicks... no keyboard support ..... Pages took ages to load. Last year i worked for migrating to a newer computer some old terminal based cobol application. The computer that worked till today and still has no problem was from 1993. The user interface ofcourse was textbased.. The speed that guys placed orders was amazing! just typing the name of the customer , then 5-10 keys to add a product to order.... Comparing to this ERP the page for placing orders Link (click sales orders) seems terribly slow to add a product... No keyboard shortcut works to save what you added and generally i believe you need 4 times more time to place an order compared to the text interface... Having to use both mouse and keyboard for this task is BAD and sadistic... So how can tek heck these people ever use a system like that ??? So in the long run desktop application seems the only way... Ofcourse browsers support shortcuts but the way to overide the defaults that browsers uses isnt cross compatible... That is a hudge problem. Finnaly, if we MUST/forced use cloud in near future what about keyboard shortcuts?? I feel confused... I have seen converters of desktop applications to browser applications but are SLOW as hell... The question is what about user friendliness?What kind of application would you use?

  Read the article

• Ubuntu 12.04.1 LTS -touch pad scroll for asus-k55v not working

  - by Aks

  have tried all the commands over terminal but still could bot fix it, for xinput i got Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? MOSART Semi. 2.4G Keyboard Mouse id=11 [slave pointer (2)] ? ? PS/2 Generic Mouse id=15 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? MOSART Semi. 2.4G Keyboard Mouse id=10 [slave keyboard (3)] ? USB 2.0 UVC HD Webcam id=12 [slave keyboard (3)] ? Asus WMI hotkeys id=13 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=14 [slave keyboard (3)] none of the post cud help to fix it :( help

  Read the article

• How do I restore the original color scheme, icons, and theme?

  - by katya sehgal

  I'd like the original colour scheme, icon style of 12.04. I somehow lost the Ambiance theme (possible error or upgrade error). I re-installed 'light-themes' from the terminal and got it back. But the panel on the top that shows the options of sound, battery and wi-fi has changed and I can-not get the original setting back. In the windows, the close, minimize tools have shifted to the right instead of the original left side. I had installed MyUnity and Ubuntu Tweak but deleted them. As such, I want the original setting back. Kindly help me with the commands. I have searched for solutions; there are multiple and I need to be sure if I should follow the same. Kindly bear before marking duplicate. Discoveries: The appearance is gray and boxy as outlined here. Not sure same problem. Similar 'gray and boxy' article here. Desktop forgets theme. I have also tried the unity --reset command. It never completes. I gave it 20 minutes.

  Read the article

• What could be causing frequent display freezes?

  - by austen

  I just installed Ubuntu 14.04 two days ago (coming from Win8) and in the two days that I've been using it, my display has frozen four or five times. The mouse won't move but the keyboard does respond so I can use the Ctrl+Alt+Bkspc command to fix it. It seems like it might just be the display freezing because one of the times I was watching a Youtube video and the audio continued playing. I have an Nvidia graphics card with the most recent Nvidia drivers for it enabled. I see that a lot of questions about Ubuntu freezing get marked as a duplicate and pretty much always linked back to a thread about what to do when it freezes. Clearly, I've got that bit figured out already and I did read that thread for further advice. What I'm looking for though is how to fix this permanently. output from lspci -nnk | grep -iA2 VGA: 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) Subsystem: Lenovo Device [17aa:2200] Kernel driver in use: i915 Update: JohnnyEnglish pointed out that Ubuntu is using the integrated graphics, not my Nvidia card. It turns out my laptop uses Nvidia Optimus and I cannot enable only the graphics card through the BIOS. I found out about Nvidia Prime and got it set up using this article. The settings panel which allows you to select the graphics says that 'performance mode' is enabled but when I check which graphics controller is enabled through the terminal, it still says it's using the integrated graphics. I'm not sure if this could be causing the freezes but I guess it's a starting point. Any ideas on how to resolve this?

  Read the article

• How to restore Windows7 after restore ubuntu bootloader?

  - by Mateusz Rogulski

  At first I will describe my situation in a few points: I have installed Windows7, and then Ubuntu 11.04 on my machine. Then everything works fine and at start of system I have screen from linux where I can choose the system. Then I reinstall Windows7 and install Windows 8 on other partition. Then I can choose between Win7 and win8 when I start system. Then I need my Ubuntu back so I want restore my bootloader from Ubuntu. I boot Ubuntu from USB and in terminal write this commands: sudo fdisk -l Then I get: /dev/sda1 1 13 104391 de Dell Utility /dev/sda2 14 2805 22425601 5 Rozszerzona /dev/sda3 * 2805 41968 314572800 7 HPFS/NTFS /dev/sda4 41968 60802 151282688 7 HPFS/NTFS /dev/sda5 14 2445 19530752 83 Linux /dev/sda6 2445 2805 2893824 82 Linux swap / Solaris Next commands: sudo mount /dev/sda5 /mnt sudo mount --bind /dev /mnt/dev sudo mount --bind /proc /mnt/proc sudo chroot /mnt grub-install /dev/sda I get Installation finished. No error reported.. And when I start my machine I have old Ubuntu start screen to choose system. Ubuntu works well. But There are no Windows 8 option. But my primary problem is when I choose Windows 7 I have: error: no such device ... error: no such disk so I have no idea what can I do. I really need both systems to work. Any help would be appreciated.

  Read the article

• The most mind-bending programming language?

  - by Xepoch

  From a reasonably common programming language, which do you find to be the most mind-bending? I have been listening to a lot of programming podcasts and taking some time to learn some new languages that are being considered upcoming, and important. I'm not necessarily talking about BrainFuck, but which language would you consider to be one that challenges the common programming paradigms? For me, I did some functional and logic (ex. Prolog) programming in the 90s, so can't say that I find anything special there. I am far from being an expert in it, but even today the most mind-bending programming language for me is Perl. Not because "Hello World" is hard to implement but rather there is so much lexical flexibility that some of the hardest solutions can be decomposed so poetically that I have to walk outside away from my terminal to clear my head. I'm not saying I'd likely sell a commercial software implementation, just that there is a distinct reason Perl is so (in)famous. Just look at the basic list of books on it. So, what is your mind-bending language that promotes your better programming and practices?

  Read the article

• How can I add a custom item to the Sound Indicator (and make it clickable more than once)?

  - by con-f-use

  The original question One of the strength of Unity are the various standardized indicators. I want to customize the sound indicator with an additional menu entry that runs a small shell script. I'm not afraid of a little Python code and I hope someone can point me to the right subroutine in the right file. I suspect that will be fairly easy but all the indicators are just so bloated that I can't look through their code in a reasonable time. Any help is appreciated. I know it is possible as the marvelous Skype-Wrapper does it. Edit 2 - Now a dirty DBus hack The one click problem from one edit before has now turned into a DBus problem. Basically we have to tell the sound indicator that our bogus player has terminated now. A dirty hack navigates around that problem: #!/bin/bash # This is '/home/confus/bin/toggleSpeaker.sh' notify-send "Toggle Speaker" "$(date)" qdbus \ com.canonical.indicator.sound \ /org/ayatana/indicator/service \ org.ayatana.indicator.service.Shutdown exit 0 Help from the community is appreciated as I don't have experience any with DBus whatsoever. Edit 1 - Takkat found a solution but only clickable once? For some reason the solution proposed by Takkat has the drawback that the resulting entry in indicator sound can only be clicked once per session. If someone has a fix for, than please comment or answer, you will be upvoted. Here you can see the result: I strongly suspect the issue is related to the .desktop-file in /home/confus/.local/share/application/toggleSpeaker.desktop, which is this: [Desktop Entry] Type=Application Name=toggleSpeaker GenericName=Toggle Speaker Icon=gstreamer-properties Exec=/home/confus/bin/toggleSpeaker.sh Terminal=false And here is a minimal example of the script in /home/confus/bin/toggleSpeaker.sh for your consideration: #!/bin/bash # This is '/home/confus/bin/toggleSpeaker.sh' notify-send "Toggle Speaker" "$(date)" exit 0

  Read the article

• Problem with recursive rar archiving non-ascii filenames

  - by AndreasT

  Say I want to create a backup of folder MainFolder's content using rar. The command rar a Backup.rar -r MainFolder does the job. BUT, if a subdirectory contains more than one file named with non-ASCII (?) characters, then only one of them is archived and the others get excluded. For example, consider the following directory hierarchy (MainFolder, A and B are folders; a, b, ? and ? are files) +MainFolder +A -a -b -? -? +B -a -b -a -b -? -? then the command rar a Backup.rar -r MainFolder skips MainFolder/A/? MainFolder/? while rar a Backup.rar -r MainFolder/* still skips MainFolder/A/? Why is it so? Any help is greatly appreciated, thanks! For the record, I already encountered some issues with non-ascii characters (see this question) that other Linux distributions seem not to have. Anyway, I use Lubuntu 12.04, terminal is lxterminal and echo $BASH_VERSION returns 4.2.25(1)-release. rar version is 4.00 beta 3. Another curiosity: right-clicking on the folder and selecting Compress... and then .rar still has the same problem. Other options (zip, tar...) behave correctly.

  Read the article

• Blank Screen after inactive time

  - by Hari K T

  I am using Ubuntu 11.04 , on a DELL Vostro 1510. If I am inactive for a certain time, the screen usually gets locked and the login prompt will be there. Yes sometimes I am able to see the login screen and logging in as normal. But sometimes after its locked and when the mouse or keyboard is moved also nothing happens. This is happening for the second time. And its not happening always . I can switch from one terminal to other from the locked screen with Alt + + Ctrl F1 etc . But when I switch to the graphical one with Alt + Ctrl + F7 ( from the locked time ) I can see only a blank screen. I tried once login in ( Alt + Ctrl + F1 ) and trying to startx, but it said something was locked and want to delete the lock and try. So I removed don't remember what exactly it was . But it too was not a success , I was forced to press the powerbutton. Is this a bug ? I saw some but all are happening for switching users. Never experienced after logging out, but this happens only when its locked automatically actually. Update : I strongly feel this is a Bug. As I upgraded to 11.10 , I didn't noticed the same issues. But at some point if any one has an answer, you can post it. I can approve.

  Read the article

• Why nautilus quicklist is not working?

  - by jasmines

  None of my bookmarks (Documents, Pictures, Download, Dropbox, Ubuntu One, Music, Public) are correctly shown but they won't open if I right click on the Home icon and select them. The only ones who work are Home and Open A New Window. I've read similar questions (http://askubuntu.com/questions/184504/unity-home-quicklist-not-working-when-nautilus-is-closed and unity home quicklist not working) but my problem seems different... Anyway I can't solve with the suggested workarounds. $ ls ~ Audiobooks Dropbox Modelli Pubblici Video Backup dvdrip-data Musica Scaricati VirtualBox VMs deja-dup grive Pictures - GT-I9100 Scrivania virtual-drives Documenti Immagini Podcasts Ubuntu One Vuze Downloads $ cat /usr/share/applications/nautilus.desktop [Desktop Entry] Name=Files Comment=Access and organize files Exec=nautilus %U Icon=system-file-manager Terminal=false Type=Application StartupNotify=true OnlyShowIn=GNOME;Unity; Categories=GNOME;GTK;Utility;Core; MimeType=inode/directory;application/x-gnome-saved-search; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=nautilus X-GNOME-Bugzilla-Component=general X-GNOME-Bugzilla-Version=3.4.2 Actions=Window; X-Ubuntu-Gettext-Domain=nautilus [Desktop Action Window] Name=Open a New Window Exec=nautilus OnlyShowIn=Unity;

  Read the article

• nomachine NX: Text missing on all gtk interface (Unity and Gnome Classic)

  - by hansioux

  [Edit] I later realized my issue only occurs when I am using NX to remote access my machine. Therefore I edited the title and description. I have also found the temp solution, which is to "disable render extension" in the custom display settings. But doing so makes the NX experience very slow laggy, and not that nice to look at. [/EDIT] I did a fresh install on a new computer, and was trying to setup my fonts. When I log in remotely via NX, my the text are missing on all gtk based interfaces. That means most menues (except for unity), right click menues, applications themselves, terminal, and so on. About the only thing unaffected is firefox. all the texts are showing just fine for firefox. So that probably already says something about text permissions. I went to check if my fonts have the correct permissions and they do. I removed my custom settings from /etc/fonts/config.d, and still the texts are missing. There is a work around by using "disable render extension" in the custom display settings. How do I fix this issue permanently?

  Read the article

• double-click does not open the default program

  - by Chang

  I installed Ubuntu 12.04, with texlive-full and texworks. When I double-click a .tex file in Nautilus, it pops up a Do you want to run "xxxxxxxx.tex", or display it contents? "xxxxxxxx.tex" is an executable text file. Run in Terminal Display Cancel Run If I choose Display, it opens texworks. How can I make it open without seeing the above conversation window? By the way, is .tex file indeed an executable file? ADDED Just for the case, my ~/.local/share/applications/mimeapps.list file looks like the following: [Default Applications] text/html=google-chrome.desktop x-scheme-handler/http=google-chrome.desktop x-scheme-handler/https=google-chrome.desktop x-scheme-handler/about=google-chrome.desktop x-scheme-handler/unknown=google-chrome.desktop text/x-tex=texworks.desktop x-scheme-handler/mailto=google-chrome.desktop [Added Associations] text/x-tex=texworks.desktop; text/x-bibtex=jabref.desktop;gedit.desktop; I observe texworks are both up and down. Should I remove one? ADDED This does not happen with all .tex files. In fact, I am currently using Ubuntu 12.04 under Virtual Box with Windows 7 host. I have my Dropbox account synced with the Windows 7 host, and I access files in Dropbox in Ubuntu through Virtual Box's shared folder functionality. (I didn't install Dropbox client in Ubuntu.) Files in Dropbox are owned by root with group vboxsf. My personal account is in the group vboxsf. It seems that I have to uncheck the option for "executable", but I have all my .tex files in the Dropbox shared folder. Would there be any workaround?

  Read the article

• Problems with Maverick upgrade

  - by altenuta

  I upgraded to Maverick 10.10 from Lucid. I have an old Toshiba Satellite with a 1.1 MHz and 256MB RAM. Initially I couldn't get my wireless to work. That solved itself after installing various updates and programs. The problems that remain are: I have to authorize at least 2 times at start-up. This machine is Ubuntu only. No boot load screen. I have a ton of programs and system directories that are in my home folder. Is this normal? It is difficult to wake the computer from sleep. Usually I just shut it down and restart. Tonight I waited and got a message about corrupt memory. The computer takes forever to do just about everything. Slow to start programs or doing things on the web. I am a longtime Mac user (since 1986). I also manage a network of several windoze machines. I am definitely a GUI guy and do very little in the terminal so I really need to know where to begin to get things straightened out. Can I rescue this machine without wiping it and doing a fresh install? This is basically a hobby machine. Aside from all the programs and upgrades I've installed, I have almost no files or documents to worry about saving. Anyone have any ideas about the problems I'm having and the best way to proceed? Thanks, Al

  Read the article

• Need alternative to Accessibility's "Locate Pointer" to visually highlight the mouse.

  - by fred.bear

  Update: See end of quetion: A black-on-white cross-hair/I-bar mouse-pointer is soemtimes hard foe me to spot in amongst black-on-white text. I've tried "Accessibility / Mouse Accessibility / Locate Pointer" .. which will: Show pointer position when Control is presssed It works (to a point), but it does have a notable problem, which renders it inpractical. It has the uncanny side-effect of disallowing all Control key navigation while editing a file/dir name in Nautilus (F2).. Just touching the Control key drops it out of edit mode, which means I can't keyboard paste, move-L/R word etc... So, I'm looking for an alternative. I've tried Compiz's Water Effect, but I need something which is sharper, faster, and localized to the pointer. Compiz's Show Mouse (with fire) is no suitable. I'm really lookingf for an analog of "Accessibility / Locate Pointer": * ie. I hit Control (only).. and it blips a quick visual pulse. UPDATE: I've just realized why I can't find my mouse so often! ... It's because it is isn't there !!! ... Two apps I use a lot, Gedit and Konsole (KDE Terminal; it renders unicode better), ... dissolve the mouse-pointer to invisible after the first key is typed ... and Konsole does it after a few seconds of idle-time... like a video-player option: "hide the mouse".. Well I don't use the mouse much, and I thought it was juse my eyesight (which does rely a lot on Compiz's zoom)... I discovered it when I installed a "novelty" app, called Geyes from gnome-applets ("A goofy set of eyes for the GNOME panel. They follow your mouse.") ... It could follow the mouse better than me! :)

  Read the article

• Battery is drained too quickly

  - by LucaB

  I'm getting really low battery life under ubuntu, not even close to windows. I tried powertop, and I saw that my laptop is consuming in idle nearly 20 watts (a bit more). I tried to install laptop-mode-tools, change "good" into "bad" in powertop, but nothing changes. I see that I have the the HD audio output device which is running at 100% every time. Could this be the problem? This is a report from powertop. The battery reports a discharge rate of 22.8 W The estimated remaining time is 33 minutes Summary: 381.8 wakeups/second, 0.0 GPU ops/second and 0.0 VFS ops/sec Usage Events/s Category Description 3.2 ms/s 182.7 Timer tick_sched_timer 100.0% Device Audio codec hwC0D3: Intel 7.9 ms/s 25.1 Process /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background no 1.9 ms/s 24.2 Interrupt [6] tasklet(softirq) 2.9 ms/s 23.2 Process /usr/lib/chromium-browser/chromium-browser --type=zygote 8.1 ms/s 20.3 Process /usr/lib/unity/unity-panel-service 0.7 ms/s 17.4 Timer hrtimer_wakeup 4.2 ms/s 12.6 Process unity-2d-panel 604.4 µs/s 9.7 Process syndaemon -i 2.0 -K -R -t 149.7 µs/s 9.7 kWork ieee80211_iface_work 0.8 ms/s 8.7 Process metacity 19.5 ms/s 1.0 Process powertop 3.0 ms/s 6.8 Process //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session 699.0 µs/s 6.8 Process /usr/lib/thunderbird/thunderbird 4.3 ms/s 4.8 Process gnome-terminal 658.9 µs/s 2.9 Interrupt [1] timer(softirq) 75.1 µs/s 2.9 kWork iwl_bg_run_time_calib_work 163.8 µs/s 1.9 Process /usr/lib/accountsservice/accounts-daemon 70.6 µs/s 1.9 Process [ksoftirqd/2] 25.8 µs/s 1.9 Process [ksoftirqd/0] 1.0 ms/s 1.0 Process /usr/bin/python /usr/sbin/powernapd 408.2 µs/s 1.0 Process unity-2d-shell 189.8 µs/s 1.0 Process /usr/lib/chromium-browser/chromium-browser 124.4 µs/s 1.0 Process /usr/lib/unity-lens-applications/unity-applications-daemon 113.3 µs/s 1.0 Process /usr/lib/gnome-settings-daemon/gnome-settings-daemon 112.0 µs/s 1.0 Process nautilus -n 104.9 µs/s 1.0 Process /usr/lib/gvfs/gvfsd-trash --spawner :1.2 /org/gtk/gvfs/exec_spaw/0 77.5 µs/s 1.0 Process /usr/lib/x86_64-linux-gnu/colord/colord 75.6 µs/s 1.0 Process /usr/lib/gvfs/gvfs-gdu-volume-monitor 75.0 µs/s 1.0 Interrupt [53] i915 74.9 µs/s 1.0 Process /usr/lib/gvfs/gvfs-afc-volume-monitor What should I do to make the battery consumption lower?

  Read the article

• 'Xojo' is the only application that I can't install

  - by Gichan

  I can't install xojo. When I click install in the software center it's not progressing. In the terminal it's stuck in : gichan02@gichan02-Latitude-D520:~$ sudo apt-get install xojo [sudo] password for gichan02: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: xojo-bin The following NEW packages will be installed: xojo xojo-bin 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 209 MB/209 MB of archives. After this operation, 596 MB of additional disk space will be used. Do you want to continue? [Y/n] Y 0% [Working] then after waiting for an hour for progress it says: Failed to fetch https://private-ppa.launchpad.net/commercial-ppa-uploaders/xojo/ubuntu/pool/main/x/xojo/xojo-bin_2013.41-0ubuntu1_i386.deb Could not resolve host: private-ppa.launchpad.net So I added apt repository for 'private-ppa': deb https://ging-giana:[email protected]/commercial-ppa-uploaders/xojo/ubuntu trusty main Then when I try 'apt-get update': GPG error: https://private-ppa.launchpad.net trusty Release: The following signatures were invalid: NODATA 2 Then I noticed something the Software Sources:Other software TAB: Added by software-center; credentials stored in /etc/apt/auth.conf https://private-ppa.launchpad.net/commercial-ppa-uploaders/xojo/ubuntu So i go to the '/etc/apt/auth.conf' ,but It cannot be opened and it is not a keyserver. So i uncheck: Added by software-center; credentials stored in /etc/apt/auth.conf https://private-ppa.launchpad.net/commercial-ppa-uploaders/xojo/ubuntu GPG error was gone. But then again I found myself at the beginning of the problem.STUCK at '0% [Working]'. 'Xojo' is the only application that I can't install.Any explanation why is it like that?

  Read the article

< Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >