the dark bug returns - Page 189

Lenovo L440 won't boot into Debian installation CD or Debian-installed HDD

- by Spencer B Liberto

I have a Lenovo L440 and a Lenovo X61. I want to install Debian Wheezy on thee L440. This morning, the L440 could successfully boot into Windows 8 from it's hard drive. I created an installation of Wheezy on a USB flash drive with Unetbootin. I created an installation CD of Wheezy with Unetbootin. The X61 can successfully boot into the flash drive. The X61 does not have a CD drive. I have attempted to boot from the live CD and the flash drive from the L440's boot menu. In both cases, the screen fades to black, and then returns me to the boot menu with no error message. I removed the L440's hard drive, and installed it in the X61. I then successfully installed Wheezy onto the hard drive from the flash drive. I'm able to boot into the Wheezy hard drive on the L440. After replacing the hard drive into the L440. I booted from the hard drive from the boot menu. Once again, the screen fades to black, and then returns me to the boot menu with no error message. What's the deal?

Read the article

High IOWait executing JBoss 3.2.7

- by user64205

Server Details: Kernel: Linux wiq31 2.4.21-9.ELsmp #1 SMP Thu Jan 8 17:08:56 EST 2004 i686 i686 i386 GNU/Linux CPU: 4 x Intel(R) Xeon(TM) CPU 3.06GHz Memory: 1028520 kB JBoss version: 3.2.7 Every time i try to start JBoss, in all CPU's, the iowait values starts to raise and the idle values starts to fall. Before executing my JBoss application, the free command returns the following output: *total used free shared buffers cached Mem: 1028520 966400 62120 0 187756 538928 -/+ buffers/cache: 239716 788804 Swap: 2044072 790672 1253400* After starting my JBoss application, the free command returns the following output: *total used free shared buffers cached Mem: 1028520 1007648 20872 0 187116 524084 -/+ buffers/cache: 296448 732072 Swap: 2044072 819096 1224976* After starting my JBoss application, without answering any request, the java process /proc/PID/status file have the following values: State: S (sleeping) SleepAVG: 27% Tgid: 24022 Pid: 24022 PPid: 21011 TracerPid: 0 Uid: 500 500 500 500 Gid: 500 500 500 500 FDSize: 256 Groups: 500 VmSize: 775200 kB VmLck: 0 kB VmRSS: 156752 kB VmData: 696752 kB VmStk: 36 kB VmExe: 21 kB VmLib: 710375 kB StaBrk: 0804f000 kB Brk: 095bb000 kB StaStk: bffff8c0 kB ExecLim: ffffffff Threads: 62 SigPnd: 0000000000000000 ShdPnd: 0000000000000000 SigBlk: 0000000000000000 SigIgn: 0000000000000000 SigCgt: 1000000180015ccf CapInh: 0000000000000000 CapPrm: 0000000000000000 CapEff: 0000000000000000 Is this behavior being caused by memory swapping, or the short memory available in the server is enough to run my application?

Read the article

HTTP responses curl and wget different results

- by Fab

To check HTTP response header for a set of urls I send with curl the following request headers foreach ( $urls as $url ) { // Setup headers - I used the same headers from Firefox version 2.0.0.6 $header[ ] = "Accept: text/xml,application/xml,application/xhtml+xml,"; $header[ ] = "text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5"; $header[ ] = "Cache-Control: max-age=0"; $header[ ] = "Connection: keep-alive"; $header[ ] = "Keep-Alive: 300"; $header[ ] = "Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7"; $header[ ] = "Accept-Language: en-us,en;q=0.5"; $header[ ] = "Pragma: "; // browsers keep this blank. curl_setopt( $ch, CURLOPT_URL, $url ); curl_setopt( $ch, CURLOPT_USERAGENT, 'Googlebot/2.1 (+http://www.google.com/bot.html)'); curl_setopt( $ch, CURLOPT_HTTPHEADER, $header); curl_setopt( $ch, CURLOPT_REFERER, 'http://www.google.com'); curl_setopt( $ch, CURLOPT_HEADER, true ); curl_setopt( $ch, CURLOPT_NOBODY, true ); curl_setopt( $ch, CURLOPT_RETURNTRANSFER, true ); curl_setopt( $ch, CURLOPT_FOLLOWLOCATION, true ); curl_setopt( $ch, CURLOPT_HTTPAUTH, CURLAUTH_ANY ); curl_setopt( $ch, CURLOPT_TIMEOUT, 10 ); //timeout 10 seconds } Sometimes I receive 200 OK which is good other time 301, 302, 307 which I consider good as well, but other times I receive weird status as 406, 500, 504 which should identify an invalid url but when I open it on the browser they are fine for example the script returns http://www.awe.co.uk/ => HTTP/1.1 406 Not Acceptable and wget returns wget http://www.awe.co.uk/ --2011-06-23 15:26:26-- http://www.awe.co.uk/ Resolving www.awe.co.uk... 77.73.123.140 Connecting to www.awe.co.uk|77.73.123.140|:80... connected. HTTP request sent, awaiting response... 200 OK Does anyone know which request header I am missing or adding in excess?

Read the article

My linux server "Number of processes created" and "Context switches" are growing incredibly fast

- by Jorge Fuentes González

I have a strange behaviour in my server :-/. Is a OpenVZ VPS (I think is OpenVZ, because /proc/user_beancounters exists and df -h returns /dev/simfs drive. Also ifconfig returns venet0). When I do cat /proc/stat, I can see how each second about 50-100 processes are created and happens about 800k-1200k context switches! All that info is with the server completely idle, no traffic nor programs running. Top shows 0 load average and 100% idle CPU. I've closed all non-needed services (httpd, mysqld, sendmail, nagios, named...) and the problem still happens. I do ps -ALf each second too and I don't see any changes, only a new ps process is created each time and the PID is just the same as before + 1, so new processes are not created, so I thought that process growing in cat /proc/stat must be threads (Yes, seems that processes in /proc/stat counts threads creation too as this states: http://webcache.googleusercontent.com/search?q=cache:8NLgzKEzHQQJ:www.linuxhowtos.org/System/procstat.htm&hl=es&tbo=d&gl=es&strip=1). I've changed to /proc dir and done cat [PID]\status with all PIDs listed with ls (Including kernel ones) and in any process voluntary_ctxt_switches nor nonvoluntary_ctxt_switches are growing at the same speed as cat /proc/stat does (just a few tens/second), Threads keeps the same also. I've done strace -p PID to all process too so I can see if any process is crating threads or something but the only process that has a bit of movement is ssh and that movement is read/write operations because of the data is sending to my terminal. After that, I've done vmstat -s and saw that forks is growing at the same speed processes in /proc/stat does. As http://linux.die.net/man/2/fork says, each fork() creates a new PID but my server PID is not growing! The last thing I can think of is that all process data that proc/stat and vmstat -s show is shared with all the other VPS stored in the same machine, but I don't know if that is correct... If someone can throw some light on this I would be really grateful.

Read the article

Cannot properly read files on the local server

- by Andrew Bestic

I'm running a RedHat 6.2 Amazon EC2 instance using stock Apache and IUS PHP53u+MySQL (+mbstring, +mysqli, +mcrypt), and phpMyAdmin from git. All configuration is near-vanilla, assuming the described installation procedure. I've been trying to import SQL files into the database using phpMyAdmin to read them from a directory on my server. phpMyAdmin lists the files fine in the drop down, but returns a "File could not be read" error when actually trying to import. Furthermore, when trying to execute file_get_contents(); on the file, it also returns a "failed to open stream: Permission denied" error. In fact, when my brother was attempting to import the SQL files using MySQL "SOURCE" as an authenticated MySQL user with ALL PRIVILEGES, he was getting an error reading the file. It seems that we are unable to read/import these files with ANY method other than root under SSH (although I can't say I've tried every possible method). I have never had this issue under regular CentOS (5, 6, 6.2) installations with the same LAMP stack configuration. Some things I've tried after searching Google and StackExchange: CHMOD 0777 both directory and files, CHOWN root, apache (only two users I can think of that PHP would use), Importing SQL files with total size under both upload_max_filesize and post_max_size, PHP open_basedir commented out, or = "/var/www" (my sites are using Apache VirtualHosts within that directory, and all the SQL files are deep within that directory), PHP safe mode is OFF (it was never ON) At the moment I have solved this issue with the smaller files by using the FILE UPLOAD method directly to phpMyAdmin, but this will not be suitable for uploading my 200+ MiB SQL files as I don't have a stable Internet connection. Any light you could shed on this situation would be greatly appreciated. I'm fair with Linux, and for the things that do stump me, Google usually has an answer. Not this time, though!

Read the article

Updating Samba From RPMs

- by KnickerKicker

My Red Hat Enterprise Edition 4 comes with Samba Version 3.0.10, which does not have support for the "inherit owner" attribute that is essential in implementing a Deny-Delete Write Once Read Many share (for examples, search google for a-shared-drop-box-using-samba). (BTW, if any body knows an alternative way to do it without updating samba, I'm all ears!) I am not all that comfortable building from source, and after hours of googling (no, I do not have a red hat subscription, so I cannot just run the up2date command), I found a whole bunch of rpms on http://ftp.sernet.de/pub/samba/tested/rhel/4/i386/ (Samba 3.2.15 for RHEL 4)... Next, I tried updating them with the rpm -U --nodeps command, but I got file conflict errors. So I went ahead and overwrote everything (or so I thought) by using the rpm's --force option. But no good has come of all that. /usr/sbin/smbd -V still returns the old version. As of now, rpm -qa | grep samba returns, samba3-client-3.2.15-40.el4 samba-3.0.10-1.4E.2 samba-client-3.0.10-1.4E.2 system-config-samba-1.2.21-1 samba3-3.2.15-40.el4 samba-common-3.0.10-1.4E.2 samba3-winbind-3.2.15-40.el4 I cannot remove the older ones because samba-common >= 3.0.8-0.pre1.3 is needed by (installed) gnome-vfs2-smb-2.8.2-8.2.x86_64 libsmbclient.so.0()(64bit) is needed by (installed) kdebase-3.3.1-5.8.x86_64 libsmbclient.so.0()(64bit) is needed by (installed) gnome-vfs2-smb-2.8.2-8.2.x86_64 Now thats a whole bunch of dependencies that I dare not touch :) Any and all pointer are welcome at this stage. Thanks in advance!

Read the article

MySQL partition "full"?

- by gdea73

I have a server that runs Debian 6.2, with Apache, PHP5, and MySQL. Well, I hadn't done anything with MySQL at all so far, just Apache and PHP; I must have installed it (mysql-server) at some point along the line, and I decided to login to the database for the first time a couple days ago as I was considering using the database for a future website project. I noticed that the "root" user had a password, and I didn't recall having set one. My usual root password was incorrect. So I attempted to reset the password. sudo service mysql stop (stopped successfully) sudo /usr/bin/mysqld_safe --skip-grant-tables --skip-networking & started successfully, from what I can tell. However, mysql itself returns "Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld,sock' (2)", and additionally sudo service mysql start returns "/etc/init.d/mysql: ERROR: The partition with /var/lib/mysql is too full! ... failed!" df -h tells me that / is 26% used, a 20GB partition, and /home, roughly 900GB, has only 5% usage. On a potentially related note, I've been experiencing random hangs since I noticed this problem, my tty2 randomly froze several times while idle, and the entire system is suddenly unstable. gnome-terminal also does not open. (Gnome-terminal apparently works now, disregard that part, but the server is still being somewhat unstable, I randomly lost connection when I was SSHed into it from my laptop, twice now.)

Read the article

CentOS iscsi initiator has session but there is no block device

- by jcalfee314

I have installed the scsi-target-utils package on CentOS and I used it to perform a discovery. The discovery did give me an active session. I restarted the iscsi service but I do not see any new devices (fdisk -l). I see in /var/log/messages that my connection is operational now. I'm not sure how to debug this further. Can someone direct me into fixing this? discovery: iscsiadm -m discovery -t sendtargets -p 192.168.0.155 returns: 192.168.0.155:3260,-1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 Just to verify it actually worked: iscsiadm -m session returns tcp: [1] 192.168.0.155:3260,1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 restarting as the directions say to do: service iscsi restart output written to /var/log/message Stopping iscsi: Sep 20 12:14:22 localhost kernel: connection1:0: detected conn error (1020) [ OK ] Starting iscsi: Sep 20 12:14:22 localhost kernel: scsi1 : iSCSI Initiator over TCP/IP Sep 20 12:14:22 localhost iscsid: Connection1:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is shutdown. Sep 20 12:14:22 localhost iscsid: Could not set session2 priority. READ/WRITE throughout and latency could be affected. [ OK ] [root@db iscsi]# Sep 20 12:14:23 localhost iscsid: Connection2:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is operational now Ran a login command: iscsiadm -m node -T iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 -p 192.168.0.155 -l No errors, no logging occurred. Next I compared the output from "fdisk -l|egrep dev" both with the iscsi session and without. There is no difference. I suppose I could just look in /etc/mtab. Any ideas on how I can get an iscsi device?

Read the article

Setup proxy with Apache 2.4 on Mac 10.8

- by Aptos

I have 1 application (Java) that running on my local machine (localhost:9000). I want to setup Apache as a front end proxy thus I used following configuration in the httpd.conf: <Directory /> #Options FollowSymLinks Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order deny,allow Allow from all </Directory> Listen 57173 LoadModule proxy_module modules/mod_proxy.so <VirtualHost *:9999> ProxyPreserveHost On ServerName project.play ProxyPass / http://127.0.0.1:9000/Login ProxyPassReverse / http://127.0.0.1:9000/Login LogLevel debug </VirtualHost> ServerName localhost:57173 I change my vim /private/etc/hosts to: ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1:9999 project.play and use dscacheutil -flushcache. The problem is that I can only access to localhost:57173, when I tried accessing http://project.play:9999, Chrome returns "Oops! Google Chrome could not find project.play:9999". Can somebody show me where I were wrong? Thank you very much P/S: When accessing localhost:9999 it returns The server made a boo boo.

Read the article

IIS 7.5 returning 404 for unknown host names

- by WaldenL

This just doesn't seem correct to me, so I'm looking for someone to tell me how I've misconfigured IIS... Configuration is IIS7.5 (2008R2), without SP1. I have IIS 7.5 configured w/several sites. ALL sites have hostnames defined in the bindings, there is NO site w/out a hostname. However, if I request an unknown hostname from the server IIS (technically Microsoft-HTTPAPI/2.0) return a 404 error, not a 400 error. I would expect a 400 (or some other major error) rather than a lowly 404. This causes a problem when I have nginx in front of multiple IISs and want to stop a site so nginx takes it out of rotation. Since IIS still returns a 404 for the request even when there is no active site for that name, nginx doesn't know the server is dead. NB: IIS returns the 404 regardless of whether there is a server, but it's stopped, or there is no server. Thoughts? Solutions? -- Additional info: OK, I added a site on a port other than 80 (5000) and then on a connection to that port asked for a site that doesn't exist, and I get the expected error 400 (Invalid hostname). So, while IIS isn't listening for generic (no host name) connections on port 80 it would seem that something is. Any ideas how to get HTTPSys to dump the list of what it's listening for?

Read the article

Changing open-files-limit in mysql 5.5

- by davidv

I'm having an issue with mysql 5.5 running on Ubuntu 12.04 with the open-files-limit parameter. I recently noticed some problems due to the 1024 limit, and actually the main system limit was set to 1024, so I modified /etc/security/limits.conf with the following: * soft nofile 32000 * hard nofile 32000 root soft nofile 32000 root hard nofile 32000 After that I check the ulimit value for root and even for mysql user, both returned the new value: 32000, so I assume the change has already been done. I also changed the value at the my.cnf file, setting open-files-limit to 24000, like this: open-files-limit = 24000 Now comes the odd part, when I restart the mysql service and check the open_files_limit variable, it returns that it's still set to 1024, so I'm having the same problems that before (obviously), I tried to use open-files-limit instead open_files_limit in the my.cnf config file, same result, BUT if I override the service command to start the service and start only using mysqld (no additional parameters), the service starts and when I check the parameter it returns 32000... I don't know where it's taking that value from, as it's not set at my.cnf and it's not being given through command line, at least, not for myself. Any ideas about why it's not working the change and how to solve it the normal way (launching it through service...)?

Read the article

Apache httpd workers retry

- by David Newcomb

I have an Apache httpd web server running mod_proxy and mod_proxy_balancer. The whole of /somedir is sent to 2 worker machines which service the requests using the round robin scheduler. Each worker machine is running IIS but I don't think that is important. I can demonstrate the load balancer working by repeatedly requesting a single page which contains the IP address of the machine and can see that it switches from one to the other in a predictable round robin fashion. If I switch off one of the IIS servers and start requesting the same page then each page only contains the IP address of the machine that is up. However, if I start IIS and don't run my IIS application then /somedir returns 500 (as it should). I've added 500 to the failonstatus (Apache 2.4) so when it hits the error Apache places the worker machine into error state. Apache still returns the proxy error to the client though. How can I make Apache catch the proxy failure and retry using a different worker in the same way that a connection failure does. Update There is almost the same question asked in StackOverflow so joining them together. http://stackoverflow.com/questions/11083707/httpd-mod-proxy-balancer-failover-failonstatus-transperant-switching

Read the article

Apache Bench reports different result with same page

- by Aspis

I'm running into a little problem base-lining an Apache2/fcgi/php-fpm server I am setting up. 1) If I run: ab -n 15000 http://mysite.com/index.php. Apache Bench returns Time per request: 41ms but document length: 0 bytes and html transferred: 0 bytes. The Transfer rate: 7.9Kb/s. 2) If I run: ab -n 15000 http://mysite.com/ Apache Bench returns Time per request: 83ms along with the accurate document length and html transferred total. The APC cache status reports identical hit counts from both test. Also Apache Bench reports no errors in either case. Overall, no errors on any test sites and all logs are clean, etc. DocumentRoot is set to index.php so I would expect both of these test runs to produced a similar result. My 2 question(s) are: 1) why the discrepancy? 2) which is the correct result? I've seen plenty of results like test 1 posted (with out question) but frankly from my own experience and those of others, accurate testing is hard to come by. Even with out goofy issues like this.

Read the article

OARC's DNSSEC validating resolvers validate all my records but A records

- by demize

I have DNS set up with powerdns. It serves my DNS pretty well, and it AXFRs to other slaves. The slaves haven't yet updated to the most recent records, but that doesn't affect the validation, it would appear. Any record I can think of (AAAA, MX, TXT, even the CNAME for www) validates -- except for A records: dig @149.20.64.20 +dnssec www.demize95.com CNAME returns ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 2, AUTHORITY: 5, ADDITIONAL: 7 while dig @149.20.64.20 +dnssec demize95.com A returns ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 5, ADDITIONAL: 7. The same happens with any other A record I have. I set up DNSSEC with pdnssec, and it does work for all the other records, but it's never validated for my A records. What's the problem here? Also, a side-note: I have to use ISC's DLV to create the chain of trust, since my domain registrar doesn't yet support sending the DS records to the com zone.

Read the article

Basic connectivity issues between Win 7 and XP mixed wired/wireless network.

- by Pulse

Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either The Win 7 desktop or the VM's it alwats returns a destination host unreachable. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

Read the article

ping incorrectly pinging 127.0.0.1

- by AlexW

I've got an odd DNS issue. I'm running a dual ipv4/ipv6 environment on Linux. Pinging some sites results in ping pinging 127.0.0.1. e.g. #> ping authserver.mojang.com PING authserver.mojang.com (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.045 ms 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=2 ttl=64 time=0.043 ms 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=3 ttl=64 time=0.058 ms --- authserver.mojang.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2000ms rtt min/avg/max/mdev = 0.043/0.048/0.058/0.010 ms Dig, however correctly returns the following: # dig authserver.mojang.com ; <<>> DiG 9.9.3-P2 <<>> authserver.mojang.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 15800 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 512 ;; QUESTION SECTION: ;authserver.mojang.com. IN A ;; ANSWER SECTION: authserver.mojang.com. 5 IN A 54.235.119.47 ;; Query time: 14 msec ;; SERVER: 2001:4860:4860::8888#53(2001:4860:4860::8888) ;; WHEN: Sat Nov 09 15:34:40 GMT 2013 ;; MSG SIZE rcvd: 66 I'm confused! My web browser returns the correct website, and the same computer booted into Windows also works correctly.

Read the article

Pulling application updates from closest server?

- by Mike Morris

Setup: 6 Major Sites with Server 2003/2008 DCs doing DHCP/AD Integrated DNS, each on their own subnet. All connect back to datacenter through a 3 mbps WAN ERP server running in the datacenter, accessed by clients at all sites Currently, when we update the software, I manually push a copy of the updated client/config files down to each DC. I have a script that we run on each PC to update the clients. It determines what subnet the PC is on, and pulls the software from that DC. It's messy, but it works. The client has an autoupdate feature, but it'll only pull from the application server (which is housed in the datacenter, over the 3 meg link). It takes forever, since the updates are not "patches" but a full version of the client, even for minor upgrades (bad design). After the most recent patch, you can configure the clients to pull from a different server. Unfortunately, it is the same for all clients. Is there some kind of DNS magic I can use to pull from the local server? For instance, if I tell the clients their update server is ERPUPDATE, can I have their local DNS server return a different IP for ERPUPDATE than the other sites? Example: Client 1 is at site A, client 2 is at site b. They each run the software and a version change is detected. As per the config files, the clients look to ERPUPDATE for their updated client. Client 1 queries DNS for the IP of ERPUPDATE at its current location (site A) DNS at site A returns 192.1.1.5 Client 1 pulls update from 192.1.1.5 Client 2 queries DNS for the IP of ERPUPDATE at its current location (site B) DNS at site B returns 192.1.2.5 Client 2 pulls update from 192.1.2.5 Excuse the poor explanation, I worked 61 hours over the weekend and haven't completely rebounded. I'll be happy to clarify if needed!

Read the article

How to get just value from database query in Excel?

- by Corin

I'm creating a spreadsheet as a collection point of information from a number of MS Access databases. I will run a query on each database to get a count of records in a particular table. Each database has the same structure but different content as they are used in different situations. So the query returns a single value, rec_count. I've figured out how to create that query, save it and then use it as the data source. So far so good. The problem is that Excel treats the query results as a table. So instead of getting just the single value the query returns, I also get the field name. Thus the result takes up two cells instead of one. When linking in the data source, I only see Table, PivotTable Report and PivotChart as options for viewing the data. I don't want any of those. I just want the single value without any formatting, column headers, etc. Is there a way to do this is Excel 2007?

Read the article

Basic connectivity issues between Win 7 and XP mixed wired/wireless network. [Solved]

- by Pulse

Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either the Win 7 desktop or the VM's; it always returns a destination host unreachable error. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

Read the article

How can I make my Super keys (Windows Key) behave more like Ctrl/Alt/Shift in Linux

- by deltaray

After using the Ctrl + "arrow keys" for 13 years to switch virtual desktops in X windows, I've been convinced recently to change to using the Super keys instead (the windows key and the context menu key, which I've remapped). This all works fine for the most part. However, something is still picking up the key events that these keys are sending as if they are a normal alphanumeric like key. For example, I first noticed this in Google Docs spreadsheet that if I press the windows key alone over top of a cell, that it starts editing that cell. It doesn't insert anything, it just sends a key event that Firefox sees and starts editing the cell. This caused problems on a collaborative document I was working on as the way Google docs works, it led to me accidentally erasing the data in a few fields before I realised what was going on. I like using the super keys, but I want them to behave more like a Ctrl or Alt key does in that its a modifier key and doesn't send anything until a second key is pressed. My setup is the following: Ubuntu 10.10 XFCE 4 Microsoft Natural Ergo 4000 keyboard (with the logo scratched out) The following is my .Xmodmap file: remove Lock = Caps_Lock keycode 66 = Escape ! The below maps my other windows context menu key. keycode 135 = Super_R Edit: As requested, here is the relevant output from xev for a keypress and keyrelease of my Super_L (left windows key) KeyPress event, serial 34, synthetic NO, window 0x8200001, root 0x15d, subw 0x0, time 2428849342, (177,174), root:(182,228), state 0x10, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 34, synthetic NO, window 0x8200001, root 0x15d, subw 0x0, time 2428849430, (177,174), root:(182,228), state 0x50, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

Read the article

WIN7 constant BSOD 0x7B on boot, not producing any dump files where to go from here?

- by prayingpantis

So my one win 7 pc has been getting a BSOD on boot (roughly a sec after load screen starts) after a power failure. The complete stop code is 0x0000007B (0x80786B58, 0xC0000034,0x00000000,0x00000000) I've searched for quite a while now on the net and it seems like most people gave up after gettting 0x7B and no dump files. What I've tried so far: startup repair - reports it cannot repair computer automatically. BadPatch is reported somewhere in a problem signature contained in the problem details. startup repair with a WIN 7 CD - also fails, I can't recall what the error was, but it was not the same as the error produced with the start up tool shipped with the version of WIN 7 installed on my machine (I think the text had something ACL-ish contained in it) used a boot disk (Hiren's boot iso) - I used it to enable the CrashDump registry key and then after BSOD, read the HDD's dump locations but it was empty. Note, I'm quite sure the registry keys I edited are the correct ones, since the reboot on BSOD option was enabled by default and after I changed the regkey controlling this functionalitty to 0 the BSOD stayed after I booted again. check disk - works and returns no problems, also it seems I'm able to access all my files on the HDD. mem test - works and returns no errors So I'm not sure what else I can do to figure out what is the problem here. I read somewhere that you can use WINDBG to remote debug another PC, but I'm not sure if this is possible since the OS isn't even loaded yet? Also the last driver change I made on the system was installing a video driver, but I had no problems with it and were able to reboot several times until the power outage happened and the BSOD appeared. Any help or guidance for a way to DEBUG this problem would really be appreciated (I'm not really that keen to try a whole bunch of random fixes, I'd rather try and narrow down the problem first).

Read the article

mysql - moving to a lower performance server, how small can I go?

- by pedalpete

Read the article

Searching for just files

- by M Schenkel

I have a couple questions about searching for files on Windows 7. I find the XP method much easier than this new Windows 7 search. Note: I am only concerned about finding files matching a search term, not ALL files containing the search term. Is there a way to search just for files? When I use the search it seems to be searching "within" files and returning instances where the name of the file is used. Example: I have a whole web directory and want to find the javascript files. But if I enter "myjavascript.js" in the search, it also returns all the html files which reference the javascript file. This is both slow and difficult to actually find the reference to the file. Is there a way to search for an exact match? The search seems to implicitly use wildcards. For instance, say I have a bunch of files in a folder: file1.txt,file11.txt, file12.txt, file13.txt. If I enter "file1.txt" in the searcher it returns instances as if I were using a wild card file1*.txt I miss XP!!!!

Read the article

Empty $upstream_http_location variable if response was cached

- by Ivaldi

I would like to cache the response of an redirect. (Cache the request to some site which returns a redirect and cache the second request which returns the actual content.) So far my config looks like this: location = /proxy { error_page 301 302 307 = @redir; resolver 8.8.8.8; proxy_pass $arg_url; proxy_intercept_errors on; proxy_cache pcache; proxy_cache_key $arg_url; proxy_cache_valid 200 301 302 307 1d; proxy_cache_min_uses 1; proxy_ignore_client_abort on; proxy_ignore_headers Set-Cookie Expires Cache-Control; } location @redir { resolver 8.8.8.8; # we need to assign $upstream_http_location to another var in order to use it with proxy_pass set $target $upstream_http_location; proxy_pass $target; proxy_cache predirects; proxy_cache_key $upstream_http_location; proxy_cache_valid 200 301 302 307 1d; proxy_cache_min_uses 1; proxy_ignore_headers Set-Cookie Expires Cache-Control; } It works for the first request or without the 30x codes for proxy_cache_valid in the /proxy part, but $target and $upstream_http_location are empty, if the response was cached. Is there a nice solution to cache both requests? Thanks!

Read the article

Apache forwarding without redirecting (application won't follow redirects)

- by DrewVS

Recently we had to move /task to /public/task, and I'd like to configure Apache to redirect accordingly. However, using mod_rewrite, though it works in the browser, seems to break applications making api calls to the above location. What happens is the application returns a page with the message saying the page was moved, but the app doesn't follow the redirect. So, is there a way to simply forward any traffic to /task to /public/task without 'redirecting', i.e, returning a redirect status code? EDIT: Here's a little more information. I've found a simple test to clarify what I'm trying to fix. Here is the URL path that needs forwarding: https://mydomain.com/task Needs to go to: https://mydomain.com/public/task If I use curl against the original domain, it just returns a redirect page notice. If I add the -L flag, which tells curl to follow redirects, it then follows the redirect successfully. I assume something very similar is happening in the application (which I don't have access to) that makes calls to the /task URL path. Since I cannot modify the application to make it follow redirects properly, I'm looking for a solution I can implement in Apache.

Search Results

Search found 17458 results on 699 pages for 'the dark bug returns'.

Page 189/699 | < Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196 | Next Page >

- by Spencer B Liberto

- by user64205

- by Fab

- by Jorge Fuentes González

- by Andrew Bestic

- by KnickerKicker

- by gdea73

- by jcalfee314

- by Aptos

- by WaldenL

- by davidv

- by David Newcomb

- by Aspis

- by demize

- by Pulse

- by AlexW

- by Mike Morris

- by Corin

- by Pulse

- by deltaray

- by prayingpantis

- by pedalpete

- by M Schenkel

- by Ivaldi

- by DrewVS

< Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196 | Next Page >