Search Results

Search found 7017 results on 281 pages for '50 736'.

Page 19/281 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• usb_modeswitch not switching

  - by deniz

  After I upgraded from kernel 2.6.18 to 3.5.3 modeswitch started not to work for me. Although lsusb shows my usb modem, usb_modeswitch does not switch it. My system information is like below. I ran lsusb, dmesg, usb-devices and usb_modeswitch their output is like below. usb_modeswitch instead of switching my modem it says "No devices in default mode found. Nothing to do. Bye.". Can you offer a solution? Kernel: Linux 3.5.3 usb_modeswitch: 1.2.3-1 usb_modeswitch-data: 20120120-1 usbutils: 006-1 libusb: 1.0.8-0.1 root@localhost$ lsusb Bus 002 Device 029: ID 12d1:1446 Huawei Technologies Co., Ltd. root@localhost$ dmesg [70112.477080] usb 2-1.4: new high-speed USB device number 30 using ehci_hcd [70112.567757] scsi49 : usb-storage 2-1.4:1.0 [70112.567842] scsi50 : usb-storage 2-1.4:1.1 [70113.571433] scsi 49:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [70113.572304] scsi 50:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [70113.574169] sr0: scsi-1 drive [70113.574223] sr 49:0:0:0: Attached scsi CD-ROM sr0 [70113.574250] sr 49:0:0:0: Attached scsi generic sg1 type 5 [70113.574350] sd 50:0:0:0: Attached scsi generic sg2 type 0 [70113.577173] sd 50:0:0:0: [sdb] Attached SCSI removable disk root@localhost$ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 30 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1446 Rev=00.00 S: Manufacturer=Huawei Technologies S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage root@localhost$ cat /etc/usb_modeswitch.d/12d1\:1446 # Huawei, newer modems TargetVendor= 0x12d1 TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" MessageContent="55534243123456780000000000000011062000000100000000000000000000" root@localhost$ usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1446 -v 12d1 -p 1446 -W * usb_modeswitch: handle USB devices with multiple modes * Version 1.2.3 (C) Josua Dietze 2012 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= 0x12d1 TargetProduct= not set TargetClass= not set TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 QisdaMode=0 GCTMode=0 KobilMode=0 SequansMode=0 MobileActionMode=0 CiscoMode=0 MessageEndpoint= not set MessageContent="55534243123456780000000000000011062000000100000000000000000000" NeedResponse=0 ResponseEndpoint= not set InquireDevice enabled (default) Success check disabled System integration mode disabled usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Skipping non bus directory devices usb_os_find_busses: Skipping non bus directory drivers usb_os_find_busses: Skipping non bus directory uevent usb_os_find_busses: Skipping non bus directory drivers_probe usb_os_find_busses: Skipping non bus directory drivers_autoprobe Looking for target devices ... No devices in target mode or class found Looking for default devices ... No devices in default mode found. Nothing to do. Bye. Thanks in advance.

  Read the article

• Hidden DNS master only sending notify to one slave

  - by Rob

  My hidden DNS master is only sending notifies to one of the name servers for a zone I have 3 named servers ns0,ns1 & ns2 all running bind 9.7.3.dfsg-1ubuntu4.1. When an update is processed the master (ns0) seems to behave normally. ns0 (192.168.2.50) zone domain.org/IN: sending notifies (serial 2012060703) client 192.168.2.52#42892: transfer of 'domain.org/IN': AXFR-style IXFR started: TSIG rndc-key client 192.168.2.52#42892: transfer of 'domain.org/IN': AXFR-style IXFR ended ns2 (192.168.2.52) client 192.168.2.50#3762: received notify for zone 'domain.org': TSIG 'rndc-key' zone domain.org/IN: Transfer started. transfer of 'domain.org/IN' from 192.168.2.50#53: connected using 192.168.2.52#55747 zone domain.org/IN: transferred serial 2012060704: TSIG 'rndc-key' transfer of 'domain.org/IN' from 192.168.2.50#53: Transfer completed: 1 messages, 34 records, 1028 bytes, 0.001 secs (1028000 bytes/sec) Nothing happens on ns1. I've turned up the logging level but there's no information in syslog about the actual name servers bind has sent notifications to so I guess this is something it doesn't log. I've also tried watching tcpdump, it never makes any attempt to notify ns1 only ns2 192.168.2.50.56278 > 192.168.2.52.53: [udp sum ok] 56418 notify [b2&3=0x2400] [1a] [1au] ? SOA? domain.org. domain.org. [0s] SOA ns1.domain.net. dnsmaster.domain.net. ? 2012060801 10800 3600 604800 3600 ar: rndc-key. ANY [0s] TSIG hmac-md5.sig-alg.reg.int. fudge=300 maclen=16 origid=56418 error=0 otherlen=0 (174) the authoritive zone has both ns1 and ns2 records $ORIGIN domain.org. $TTL 3h @ IN SOA ns1.domain.net. dnsmaster.domain.net. ( 2012060801 ; Serial yyyymmddnn 3h ; Refresh After 3 hours 1h ; Retry Retry after 1 hour 1w ; Expire after 1 week 1h ) ; Minimum negative caching of 1 hour @ 3600 IN NS ns1.domain.net. @ 3600 IN NS ns2.domain.net. // Edit I have added also-notify {192.168.2.51;192.168.2.52;}; explicitly to the zone file and it all works fine, both ns1 and ns2 get notify messages and transfers succeed. I was under the impression bind would automatically send notifies to all NS records on a zone, maybe it's bugged?

  Read the article

• Postfix / Dovecot and Email Retrieval

  - by Eric J.

  I have setup Postfix and Dovecot on an Ubuntu box following the instructions http://www.exratione.com/2012/05/a-mailserver-on-ubuntu-1204-postfix-dovecot-mysql/ I can see that email is being delivered to and accepted by the server, but the email is not available for retrieval via POP3. What could be missing in my configuraton? It seems that email is not being properly handed off to Dovecot. Here are what I believe are the relevant /var/log/mail.log entries for an attempt to send email from another domain (hosted by Gmail) to the domain I have setup: Logged during SMTP connection postfix/smtpd[14689]: connect from mail-vb0-f50.google.com[209.85.212.50] postfix/smtpd[14689]: Anonymous TLS connection established from mail-vb0-f50.google.com[209.85.212.50]: TLSv1 with cipher ECDHE-RSA-RC4-SHA (128/128 bits) postfix/smtpd[14689]: 5782740ACF: client=mail-vb0-f50.google.com[209.85.212.50] postfix/cleanup[14696]: 5782740ACF: message-id=<CAEjmKcjHnTY4yk=3QXoNrD76=04g-s9utPguTFB02Fx53GMPmw@mail.gmail.com> postfix/qmgr[14687]: 5782740ACF: from=<[email protected]>, size=1947, nrcpt=1 (queue active) postfix/smtpd[14702]: connect from mail.destinationdomain.com[127.0.0.1] postfix/smtpd[14702]: 2940A41AA9: client=mail.destinationdomain.com[127.0.0.1] postfix/cleanup[14696]: 2940A41AA9: message-id=<CAEjmKcjHnTY4yk=3QXoNrD76=04g-s9utPguTFB02Fx53GMPmw@mail.gmail.com> postfix/qmgr[14687]: 2940A41AA9: from=<[email protected]>, size=2450, nrcpt=1 (queue active) amavis[21309]: (21309-02) Passed CLEAN, [209.85.212.50] <[email protected]> -> <[email protected]>, Message-ID: <CAEjmKcjHnTY4yk=3QXoNrD76=04g-s9utPguTFB02Fx53GMPmw@mail.gmail.com>, mail_id: W52ZB8FAAA+8, Hits: -0.101, size: 1946, queued_as: 2940A41AA9, [email protected], 784 ms postfix/smtpd[14702]: disconnect from mail.destinationdomain.com[127.0.0.1] postfix/smtp[14698]: 5782740ACF: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=1.1, delays=0.29/0.01/0/0.79, dsn=2.0.0, status=sent (250 2.0.0 from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 2940A41AA9) postfix/qmgr[14687]: 5782740ACF: removed dovecot: lda([email protected]): msgid=<CAEjmKcjHnTY4yk=3QXoNrD76=04g-s9utPguTFB02Fx53GMPmw@mail.gmail.com>: saved mail to INBOX postfix/pipe[14703]: 2940A41AA9: to=<[email protected]>, relay=dovecot, delay=0.08, delays=0.02/0.02/0/0.04, dsn=2.0.0, status=sent (delivered via dovecot service) postfix/qmgr[14687]: 2940A41AA9: removed Logged during POP3 retrieval attempts dovecot: pop3-login: Login: user=<[email protected]>, method=PLAIN, rip=209.85.220.135, lip=10.195.83.10, mpid=14706 dovecot: pop3([email protected]): Disconnected: Logged out top=0/0, retr=1/2557, del=1/1, size=2540 postfix/smtpd[14689]: disconnect from mail-vb0-f50.google.com[209.85.212.50] dovecot: pop3-login: Login: user=<[email protected]>, method=PLAIN, rip=209.85.212.31, lip=10.195.83.10, mpid=14708 dovecot: pop3([email protected]): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0

  Read the article

• A Skill Testing (Search Engine) Calculation

  - by Ken Cox [MVP]

  To claim a contest prize, I had to answer the following skill-testing question: 1000 - 50 / 2 x 10 Okay, it’s not a problem as long as you know about operator precedence. As a developer, my brain automatically supplied brackets. I was curious as to whether this exact skill-testing question is commonly-used in online contests, so I Googled the formula. To my amazement, Google returned the result of the calculation – complete with brackets: 1 000 - ((50 / 2) x 10) = 750 (Google) Bing also has a calculator...(read more)

  Read the article

• CPU temperature higher under Ubuntu 12.10 than under Windows 7

  - by user110019

  The CPU temperature under Ubuntu 12.10 is significantly higher than under Windows 7 doing similar tasks. For example, the CPU temperature under Windows when watching flash videos is around 50-60 degrees, under Ubuntu it is between 65-75. In idle mode in Ubuntu it is usually around 50. I use an i3 core and an integrated graphics. Is there a way to lower the temperature? And I don't mean via Jupiter as this doesn't work for watching videos..

  Read the article

• Google I/O 2012 - Not Just a Map

  Google I/O 2012 - Not Just a Map Josh Livni, Nabil Naghdy The Google Maps API is the most popular mapping platform in the world, but it offers developers and users so much more than just a map. In this session we'll review the wealth of additional value that the Maps API has to offer, and the essential features that developers should be aware of across a number of verticals, including real estate, travel, and retail. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 694 0 ratings Time: 50:50 More in Science & Technology

  Read the article

• rotating spheres

  - by Dave

  I want to continuously rotate 2 spheres, however the rotation does not seem to work. Here is my code: float angle = 0.0f; void light(){ glEnable(GL_LIGHTING); glEnable(GL_LIGHT0); glEnable(GL_LIGHT1); // Create light components GLfloat positionlight1[] = { 9.0, 5.0, 1.0, 0.0 }; GLfloat positionlight2[] = {0.2,2.5,1.3,0.0}; GLfloat light_ambient1[] = { 0.0, 0.0, 1.0, 1.0}; GLfloat light_diffuse[] = { 1.0, 1.0, 1.0, 1.0 }; glLightfv(GL_LIGHT0, GL_AMBIENT, light_ambient1); glLightfv(GL_LIGHT1, GL_DIFFUSE, light_diffuse); glLightfv(GL_LIGHT0, GL_POSITION, positionlight1); glLightfv(GL_LIGHT1, GL_POSITION, positionlight2); } void changeSize(int w, int h) { if (h==0) // Prevent A Divide By Zero By { h=1; // Making Height Equal One } glMatrixMode(GL_PROJECTION); // Select The Projection Matrix glLoadIdentity(); // Reset The Projection Matrix glViewport(0,0,w,h);// Reset The Current Viewport // Calculate The Aspect Ratio Of The Window gluPerspective(45.0f,(GLfloat)w/(GLfloat)h,0.1f,100.0f); glMatrixMode(GL_MODELVIEW); // Select The Modelview Matrix // Reset The Modelview Matrix } void renderScene(void) { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glPushMatrix(); //set where to start the current object glTranslatef(0.0,1.2,-6); glRotatef(angle,0,1.2,-6); glutSolidSphere(1,50,50); glPopMatrix(); //end the current object transformations glPushMatrix(); //set where to start the current object glTranslatef(0.0,-2,-6); glRotatef(angle,0,-2,-6); glutSolidSphere(0.5,50,50); glPopMatrix(); //end the current object transformations angle=+0.1; glutSwapBuffers(); } int main(int argc, char **argv) { // init GLUT and create window glutInit(&argc, argv); glutInitDisplayMode(GLUT_DEPTH | GLUT_DOUBLE | GLUT_RGBA); glutInitWindowPosition(100,100); glutInitWindowSize(500,500); glutCreateWindow("Hello World"); // register callbacks light(); glutDisplayFunc(renderScene); glutReshapeFunc(changeSize); glutIdleFunc(renderScene); // enter GLUT event processing loop glutMainLoop(); return 1; } Graphicstest::Graphicstest(void) { } In the renderscene where i draw,translate and rotate my 2 spheres. It does not seem to rotate the spheres continuously. What am i doing wrong?

  Read the article

• How can I merge two non-contiguous partitions using GParted?

  - by theprise

  My dual-boot machine has partitions as follows: sda1 50 GB NTFS sda2 15 GB unallocated sda3 20 GB ext3 sda4 20 GB ext4 I would like to allocate the unused space on sda2 to my Ubuntu partition on sda4, hopefully leaving the other two partitions untouched, leaving this configuration: sda1 50 GB NTFS sda3 20 GB ext3 sda4 35 GB ext4 Is this possible? If so, how can it be done, preferably using GParted?

  Read the article

• practical use of knowledge vs tutorials [on hold]

  - by Lauris Skraucis

  I DONT NEED FACTS,I NEED OPINIONS FROM OTHER DEVELOPERS! Which would be more useful, spend more time on tutorials than on practical use of knowledge or spend more time making real life apps? Like I do everything 50/50 or better I spend all time practicing and putting my knowledge in real life things (php, jQuery, AngularJS)? This is a big pain, I learnt jQuery, then Angular, then php, but didn't practice and forget the code, now I watched basic and intermediate tutorials to refresh knowledge, so what do you think what is the best?

  Read the article

• Basic Android game loop having issues

  - by WillDaBeast509

  I've set up a very basic game loop that should draw a circle, run 100 times, then draw another. I also have a text field that should display how many times the loop has ran. However, the screen seems to not update. It displays a different value for the tick count (different each time the app is ran) and simply stays there. After exiting the app, I get an error saying "Unfortunately, MyApp has stopped." Here is the relevant code: DrawView public class DrawView extends SurfaceView implements SurfaceHolder.Callback { Paint p = new Paint(); MainThread thread; private int y=0; public DrawView(Context c) { super(c); thread = new MainThread(this, getHolder()); thread.running = true; getHolder().addCallback(this); setFocusable(true); } public void draw(Canvas c) { if(c==null) return; //super.onDraw(c); c.drawColor(Color.WHITE); p.setColor(Color.RED); p.setTextSize(32); p.setTypeface(Typeface.SANS_SERIF); c.drawCircle(getWidth()/2-100,getHeight()/2, 50, p); c.drawText("y = " + y, 50, 50, p); if(y>=100) { Log.i("DRAW", "drawing circle"); c.drawCircle(getWidth()/2+100,getHeight()/2, 50, p); } else y++; Log.i("INFO", "y = " + y); } @Override public boolean onTouchEvent(MotionEvent event) { return true; } public void onDraw(Canvas c){} public void surfaceCreated(SurfaceHolder p1) { thread.start(); } public void surfaceChanged(SurfaceHolder p1, int p2, int p3, int p4) { // TODO: Implement this method } public void surfaceDestroyed(SurfaceHolder p1) { thread.running = false; boolean retry = true; while (retry) { try { thread.join(); retry = false; } catch (InterruptedException e) { Log.i("EX", "cathing exception"); } } } } MainThread public class MainThread extends Thread { private DrawView page; private SurfaceHolder holder; public boolean running; public MainThread(DrawView p, SurfaceHolder h) { super(); page = p; holder = h; } @Override public void run() { while(running) { Canvas c = holder.lockCanvas(); page.draw(c); holder.unlockCanvasAndPost(c); } } } Here is an example log outupt: http://pastebin.com/tM9dUPuk It counts the number of ticks correctly and should draw the second circle, but the screen looks like its not updating. After closing the app, the log continues to run and keep outputting "y = 100 drawing circle" until it crashes and shows the error report. What is going on and how can I fix these two problems?

  Read the article

• NGINX MIME TYPE

  - by justanotherprogrammer

  I have my nginx conf file so that when ever a mobile device visits my site the url gets rewritten to m.mysite.com I did it by adding the following set $mobile_rewrite do_not_perform; if ($http_user_agent ~* "android.+mobile|avantgo|bada\/|blackberry|blazer|compal|elaine|fennec|hiptop|iemobile|ip(hone|od)|iris|kindle|lge |maemo|midp|mmp|netfront|opera m(ob|in)i|palm( os)?|phone|p(ixi|re)\/|plucker|pocket|psp|symbian|treo|up\.(browser|link)|vodafone|wap|windows (ce|phone)|xda|xiino") { set $mobile_rewrite perform; } if ($http_user_agent ~* "^(1207|6310|6590|3gso|4thp|50[1-6]i|770s|802s|a wa|abac|ac(er|oo|s\-)|ai(ko|rn)|al(av|ca|co)|amoi|an(ex|ny|yw)|aptu|ar(ch|go)|as(te|us)|attw|au(di|\-m|r |s )|avan|be(ck|ll|nq)|bi(lb|rd)|bl(ac|az)|br(e|v)w|bumb|bw\-(n|u)|c55\/|capi|ccwa|cdm\-|cell|chtm|cldc|cmd\-|co(mp|nd)|craw|da(it|ll|ng)|dbte|dc\-s|devi|dica|dmob|do(c|p)o|ds(12|\-d)|el(49|ai)|em(l2|ul)|er(ic|k0)|esl8|ez([4-7]0|os|wa|ze)|fetc|fly(\-|_)|g1 u|g560|gene|gf\-5|g\-mo|go(\.w|od)|gr(ad|un)|haie|hcit|hd\-(m|p|t)|hei\-|hi(pt|ta)|hp( i|ip)|hs\-c|ht(c(\-| |_|a|g|p|s|t)|tp)|hu(aw|tc)|i\-(20|go|ma)|i230|iac( |\-|\/)|ibro|idea|ig01|ikom|im1k|inno|ipaq|iris|ja(t|v)a|jbro|jemu|jigs|kddi|keji|kgt( |\/)|klon|kpt |kwc\-|kyo(c|k)|le(no|xi)|lg( g|\/(k|l|u)|50|54|e\-|e\/|\-[a-w])|libw|lynx|m1\-w|m3ga|m50\/|ma(te|ui|xo)|mc(01|21|ca)|m\-cr|me(di|rc|ri)|mi(o8|oa|ts)|mmef|mo(01|02|bi|de|do|t(\-| |o|v)|zz)|mt(50|p1|v )|mwbp|mywa|n10[0-2]|n20[2-3]|n30(0|2)|n50(0|2|5)|n7(0(0|1)|10)|ne((c|m)\-|on|tf|wf|wg|wt)|nok(6|i)|nzph|o2im|op(ti|wv)|oran|owg1|p800|pan(a|d|t)|pdxg|pg(13|\-([1-8]|c))|phil|pire|pl(ay|uc)|pn\-2|po(ck|rt|se)|prox|psio|pt\-g|qa\-a|qc(07|12|21|32|60|\-[2-7]|i\-)|qtek|r380|r600|raks|rim9|ro(ve|zo)|s55\/|sa(ge|ma|mm|ms|ny|va)|sc(01|h\-|oo|p\-)|sdk\/|se(c(\-|0|1)|47|mc|nd|ri)|sgh\-|shar|sie(\-|m)|sk\-0|sl(45|id)|sm(al|ar|b3|it|t5)|so(ft|ny)|sp(01|h\-|v\-|v )|sy(01|mb)|t2(18|50)|t6(00|10|18)|ta(gt|lk)|tcl\-|tdg\-|tel(i|m)|tim\-|t\-mo|to(pl|sh)|ts(70|m\-|m3|m5)|tx\-9|up(\.b|g1|si)|utst|v400|v750|veri|vi(rg|te)|vk(40|5[0-3]|\-v)|vm40|voda|vulc|vx(52|53|60|61|70|80|81|83|85|98)|w3c(\-| )|webc|whit|wi(g |nc|nw)|wmlb|wonu|x700|xda(\-|2|g)|yas\-|your|zeto|zte\-)") { set $mobile_rewrite perform; } if ($mobile_rewrite = perform) { rewrite ^ http://m.mywebsite.com redirect; break; } I got it from http://detectmobilebrowsers.com/ IT WORKS.But none of my images/js/css files load only the HTML. And I know its the chunk of code I mentioned above because when I remove it and visit m.mywebsite.com from my mobile device everything loads up.So this bit of code does SOMETHING to my css/img/js MIME TYPES. I found this out through the the console error messages from safari with the user agent set to iphone. text.cssResource interpreted as stylesheet but transferred with MIME type text/html. 960_16_col.cssResource interpreted as stylesheet but transferred with MIME type text/html. design.cssResource interpreted as stylesheet but transferred with MIME type text/html. navigation_menu.cssResource interpreted as stylesheet but transferred with MIME type text/html. reset.cssResource interpreted as stylesheet but transferred with MIME type text/html. slide_down_panel.cssResource interpreted as stylesheet but transferred with MIME type text/html. myrealtorpage_view.cssResource interpreted as stylesheet but transferred with MIME type text/html. head.jsResource interpreted as script but transferred with MIME type text/html. head.js:1SyntaxError: Parse error isaac:208ReferenceError: Can't find variable: head mrp_home_icon.pngResource interpreted as image but transferred with MIME type text/html. M_1_L_289_I_499_default_thumb.jpgResource interpreted as image but transferred with MIME type text/html. M_1_L_290_I_500_default_thumb.jpgResource interpreted as image but transferred with MIME type text/html. M_1_default.jpgResource interpreted as image but transferred with MIME type text/html. default_listing_image.pngResource interpreted as image but transferred with MIME type text/html. here is my whole nginx conf file just incase... worker_processes 1; events { worker_connections 1024; } http { include mime.types; include /etc/nginx/conf/fastcgi.conf; default_type application/octet-stream; sendfile on; keepalive_timeout 65; #server1 server { listen 80; server_name mywebsite.com www.mywebsite.com ; index index.html index.htm index.php; root /srv/http/mywebsite.com/public; access_log /srv/http/mywebsite.com/logs/access.log; error_log /srv/http/mywebsite.com/logs/error.log; #---------------- For CodeIgniter ----------------# # canonicalize codeigniter url end points # if your default controller is something other than "welcome" you should change the following if ($request_uri ~* ^(/main(/index)?|/index(.php)?)/?$) { rewrite ^(.*)$ / permanent; } # removes trailing "index" from all controllers if ($request_uri ~* index/?$) { rewrite ^/(.*)/index/?$ /$1 permanent; } # removes trailing slashes (prevents SEO duplicate content issues) if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } # unless the request is for a valid file (image, js, css, etc.), send to bootstrap if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?/$1 last; break; } #---------------------------------------------------# #--------------- For Mobile Devices ----------------# set $mobile_rewrite do_not_perform; if ($http_user_agent ~* "android.+mobile|avantgo|bada\/|blackberry|blazer|compal|elaine|fennec|hiptop|iemobile|ip(hone|od)|iris|kindle|lge |maemo|midp|mmp|netfront|opera m(ob|in)i|palm( os)?|phone|p(ixi|re)\/|plucker|pocket|psp|symbian|treo|up\.(browser|link)|vodafone|wap|windows (ce|phone)|xda|xiino") { set $mobile_rewrite perform; } if ($http_user_agent ~* "^(1207|6310|6590|3gso|4thp|50[1-6]i|770s|802s|a wa|abac|ac(er|oo|s\-)|ai(ko|rn)|al(av|ca|co)|amoi|an(ex|ny|yw)|aptu|ar(ch|go)|as(te|us)|attw|au(di|\-m|r |s )|avan|be(ck|ll|nq)|bi(lb|rd)|bl(ac|az)|br(e|v)w|bumb|bw\-(n|u)|c55\/|capi|ccwa|cdm\-|cell|chtm|cldc|cmd\-|co(mp|nd)|craw|da(it|ll|ng)|dbte|dc\-s|devi|dica|dmob|do(c|p)o|ds(12|\-d)|el(49|ai)|em(l2|ul)|er(ic|k0)|esl8|ez([4-7]0|os|wa|ze)|fetc|fly(\-|_)|g1 u|g560|gene|gf\-5|g\-mo|go(\.w|od)|gr(ad|un)|haie|hcit|hd\-(m|p|t)|hei\-|hi(pt|ta)|hp( i|ip)|hs\-c|ht(c(\-| |_|a|g|p|s|t)|tp)|hu(aw|tc)|i\-(20|go|ma)|i230|iac( |\-|\/)|ibro|idea|ig01|ikom|im1k|inno|ipaq|iris|ja(t|v)a|jbro|jemu|jigs|kddi|keji|kgt( |\/)|klon|kpt |kwc\-|kyo(c|k)|le(no|xi)|lg( g|\/(k|l|u)|50|54|e\-|e\/|\-[a-w])|libw|lynx|m1\-w|m3ga|m50\/|ma(te|ui|xo)|mc(01|21|ca)|m\-cr|me(di|rc|ri)|mi(o8|oa|ts)|mmef|mo(01|02|bi|de|do|t(\-| |o|v)|zz)|mt(50|p1|v )|mwbp|mywa|n10[0-2]|n20[2-3]|n30(0|2)|n50(0|2|5)|n7(0(0|1)|10)|ne((c|m)\-|on|tf|wf|wg|wt)|nok(6|i)|nzph|o2im|op(ti|wv)|oran|owg1|p800|pan(a|d|t)|pdxg|pg(13|\-([1-8]|c))|phil|pire|pl(ay|uc)|pn\-2|po(ck|rt|se)|prox|psio|pt\-g|qa\-a|qc(07|12|21|32|60|\-[2-7]|i\-)|qtek|r380|r600|raks|rim9|ro(ve|zo)|s55\/|sa(ge|ma|mm|ms|ny|va)|sc(01|h\-|oo|p\-)|sdk\/|se(c(\-|0|1)|47|mc|nd|ri)|sgh\-|shar|sie(\-|m)|sk\-0|sl(45|id)|sm(al|ar|b3|it|t5)|so(ft|ny)|sp(01|h\-|v\-|v )|sy(01|mb)|t2(18|50)|t6(00|10|18)|ta(gt|lk)|tcl\-|tdg\-|tel(i|m)|tim\-|t\-mo|to(pl|sh)|ts(70|m\-|m3|m5)|tx\-9|up(\.b|g1|si)|utst|v400|v750|veri|vi(rg|te)|vk(40|5[0-3]|\-v)|vm40|voda|vulc|vx(52|53|60|61|70|80|81|83|85|98)|w3c(\-| )|webc|whit|wi(g |nc|nw)|wmlb|wonu|x700|xda(\-|2|g)|yas\-|your|zeto|zte\-)") { set $mobile_rewrite perform; } if ($mobile_rewrite = perform) { rewrite ^ http://m.mywebsite.com redirect; #rewrite ^(.*)$ $scheme://mywebsite.com/mobile/$1; #return 301 http://m.mywebsite.com; #break; } #---------------------------------------------------# location / { index index.html index.htm index.php; } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /etc/nginx/conf/fastcgi_params; } }#sever1 #server 2 server { listen 80; server_name m.mywebsite.com; index index.html index.htm index.php; root /srv/http/mywebsite.com/public; access_log /srv/http/mywebsite.com/logs/access.log; error_log /srv/http/mywebsite.com/logs/error.log; #---------------- For CodeIgniter ----------------# # canonicalize codeigniter url end points # if your default controller is something other than "welcome" you should change the following if ($request_uri ~* ^(/main(/index)?|/index(.php)?)/?$) { rewrite ^(.*)$ / permanent; } # removes trailing "index" from all controllers if ($request_uri ~* index/?$) { rewrite ^/(.*)/index/?$ /$1 permanent; } # removes trailing slashes (prevents SEO duplicate content issues) if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } # unless the request is for a valid file (image, js, css, etc.), send to bootstrap if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?/$1 last; break; } #---------------------------------------------------# location / { index index.html index.htm index.php; } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /etc/nginx/conf/fastcgi_params; } }#sever2 }#http I could just detect the mobile browsers with php or javascript but i need to make the detection at the server level so that i can use the 'm' in m.mywebsite.com as a flag in my controllers (codeigniter) to serve up the right view. I hope someone can help me! Thank you!

  Read the article

• Force Windows Local Subnet Traffic through a Gateway

  - by Beerey

  Hi all, We are attempting to route all traffic from a certain machine to a gateway. This works ok for traffic destined for subnets outside of the machine's subnet. However, traffic to machines in the same subnet as the source machine goes through an On-Link gateway in Windows. This means that the default gateway is ignored, and traffic in a subnet (for example, 192.168.50.10 - 192.168.50.11) flows. Destination Netmask Gateway Interface Metric 192.168.50.0 255.255.255.0 On-link 192.168.50.214 276 This route can be deleted from Windows, but when the machine is rebooted it always comes back. Adding a persistant static route to the gateway with a lower metric doesn't work, since it will still try the On-Link gateway after the persistant route fails. Adding each machine in a VLAN isn't an option due to the setup we have Adding a startup script to delete the gateway isn't a great option either, since users will have full admin access to the machine and might disable the script. We cannot transperantly intercept all network traffic on the subnet using Gratuitous ARPs or transparent proxying, since there are other machines on the subnet which use a different gateway The only way we have gotten it to work is by adding a persistant route to the gateway for the subnet traffic, and deleting the On-link route on reboot. The question is then. Is there a way to permanently remove this On-link route If not, is there a way to otherwise force even local subnet traffic to go through a gateway?

  Read the article

• Chef: nested data bag data to template file returns "can't convert String into Integer"

  - by Dalho Park

  I'm creating simple test recipe with a template and data bag. What I'm trying to do is creating a config file from data bag that has simple nested information, but I receive error "can't convert String into Integer" Here are my setting file 1) recipe/default.rb data1 = data_bag_item( 'mytest', 'qa' )['test'] data2 = data_bag_item( 'mytest', 'qa' ) template "/opt/env/test.cfg" do source "test.erb" action :create_if_missing mode 0664 owner "root" group "root" variables({ :pepe1 = data1['part.name'], :pepe2 = data2['transport.tcp.ip2'] }) end 2)my data bag named "mytest" $knife data bag show mytest qa id: qa test: part.name: L12 transport.tcp.ip: 111.111.111.111 transport.tcp.port: 9199 transport.tcp.ip2: 222.222.222.222 3)template file test.erb part.name=<%= @pepe1 % transport.tcp.binding=<%= @pepe2 % Error reurns when I run chef-client on my server, [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in from_file' [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in[]',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in block in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:infrom_file' [2013-06-24T19:50:38+00:00] DEBUG: backtrace entry for compile error: '/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in `[]'' [2013-06-24T19:50:38+00:00] DEBUG: Line number of compile error: '19' Recipe Compile Error in /var/chef/cache/cookbooks/config_test/recipes/default.rb TypeError can't convert String into Integer Cookbook Trace: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []' /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file' /var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in `from_file' Relevant File Content: /var/chef/cache/cookbooks/config_test/recipes/default.rb: 12: template "/opt/env/test.cfg" do 13: source "test.erb" 14: action :create_if_missing 15: mode 0664 16: owner "root" 17: group "root" 18: variables({ 19 :pepe1 = data1['part.name'], 20: :pepe2 = data2['transport.tcp.ip2'] 21: }) 22: end 23: I tried many things and if I comment out "pepe1 = data1['part.name'],", then :pepe2 = data2['transport.tcp.ip2'] works fine. only nested data "part.name" cannot be set to @pepe1. Does anyone knows why I receive the errors? thanks,

  Read the article

• Unable to login to Amazon EC2 compute server

  - by MasterGaurav

  I am unable to login to the EC2 server. Here's the log of the connection-attempt: $ ssh -v -i ec2-key-incoleg-x002.pem [email protected] OpenSSH_5.6p1, OpenSSL 0.9.8p 16 Nov 2010 debug1: Reading configuration data /home/gvaish/.ssh/config debug1: Applying options for * debug1: Connecting to ec2-50-16-0-207.compute-1.amazonaws.com [50.16.0.207] port 22. debug1: Connection established. debug1: identity file ec2-key-incoleg-x002.pem type -1 debug1: identity file ec2-key-incoleg-x002.pem-cert type -1 debug1: identity file /home/gvaish/.ssh/id_rsa type -1 debug1: identity file /home/gvaish/.ssh/id_rsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'ec2-50-16-0-207.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /home/gvaish/.ssh/known_hosts:8 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: ec2-key-incoleg-x002.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey debug1: Trying private key: /home/gvaish/.ssh/id_rsa debug1: No more authentication methods to try. Permission denied (publickey). What can be the possible reason? How do I fix the issue?

  Read the article

• RTNETLINK answers: Invalid argument

  - by LinuxPenseur

  When my system boots up it shows the following message. Bringing up loopback interface: [ OK ] Bringing up interface eth0: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth1: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth2: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth3: RTNETLINK answers: Invalid argument [ OK ] Why is this happening. Normally it does not give the message RTNETLINK answers: Invalid argument I did ifconfig and the output is eth0 Link encap:Ethernet HWaddr 00:00:50:6D:56:B4 inet addr:120.0.10.137 Bcast:120.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b4/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:214 (214.0 b) Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:00:50:6D:56:B5 inet addr:121.0.10.137 Bcast:121.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:214 (214.0 b) Base address:0xc000 eth2 Link encap:Ethernet HWaddr 00:00:50:6D:56:B6 inet addr:128.0.10.137 Bcast:128.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1006 (1006.0 b) TX bytes:396 (396.0 b) Interrupt:16 eth3 Link encap:Ethernet HWaddr 00:00:50:6D:56:B7 inet addr:123.0.10.137 Bcast:123.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:728 (728.0 b) TX bytes:396 (396.0 b) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:980 (980.0 b) TX bytes:980 (980.0 b) What could be the reason for the message and how to change this to normal? Thanks

  Read the article

• postgresql deleteing old tables

  - by BB

  I have a postgresql database which stores my radius connection information. What I want to do is only store a months worth of logs. How would I craft a sql statement that I can run from cron that would go and delete and rows that where older then a month? Format of the date in the table. that date is taken from acctstoptime collum Date format 2010-01-27 16:02:17-05 Format of the table in question. -- Table: radacct -- DROP TABLE radacct; CREATE TABLE radacct ( radacctid bigserial NOT NULL, acctsessionid character varying(32) NOT NULL, acctuniqueid character varying(32) NOT NULL, username character varying(253), groupname character varying(253), realm character varying(64), nasipaddress inet NOT NULL, nasportid character varying(15), nasporttype character varying(32), acctstarttime timestamp with time zone, acctstoptime timestamp with time zone, acctsessiontime bigint, acctauthentic character varying(32), connectinfo_start character varying(50), connectinfo_stop character varying(50), acctinputoctets bigint, acctoutputoctets bigint, calledstationid character varying(50), callingstationid character varying(50), acctterminatecause character varying(32), servicetype character varying(32), xascendsessionsvrkey character varying(10), framedprotocol character varying(32), framedipaddress inet, acctstartdelay integer, acctstopdelay integer, freesidestatus character varying(32), CONSTRAINT radacct_pkey PRIMARY KEY (radacctid) ) WITH (OIDS=FALSE); ALTER TABLE radacct OWNER TO radius; -- Index: freesidestatus -- DROP INDEX freesidestatus; CREATE INDEX freesidestatus ON radacct USING btree (freesidestatus); -- Index: radacct_active_user_idx -- DROP INDEX radacct_active_user_idx; CREATE INDEX radacct_active_user_idx ON radacct USING btree (username, nasipaddress, acctsessionid) WHERE acctstoptime IS NULL; -- Index: radacct_start_user_idx -- DROP INDEX radacct_start_user_idx; CREATE INDEX radacct_start_user_idx ON radacct USING btree (acctstarttime, username);

  Read the article

• postgresql deleteing old records from log tables

  - by Max

  I have a postgresql database which stores my radius connection information. What I want to do is only store a months worth of logs. How would I craft a sql statement that I can run from cron that would go and delete and rows that where older then a month? Format of the date in the table. that date is taken from acctstoptime collum Date format 2010-01-27 16:02:17-05 Format of the table in question. -- Table: radacct CREATE TABLE radacct ( radacctid bigserial NOT NULL, acctsessionid character varying(32) NOT NULL, acctuniqueid character varying(32) NOT NULL, username character varying(253), groupname character varying(253), realm character varying(64), nasipaddress inet NOT NULL, nasportid character varying(15), nasporttype character varying(32), acctstarttime timestamp with time zone, acctstoptime timestamp with time zone, acctsessiontime bigint, acctauthentic character varying(32), connectinfo_start character varying(50), connectinfo_stop character varying(50), acctinputoctets bigint, acctoutputoctets bigint, calledstationid character varying(50), callingstationid character varying(50), acctterminatecause character varying(32), servicetype character varying(32), xascendsessionsvrkey character varying(10), framedprotocol character varying(32), framedipaddress inet, acctstartdelay integer, acctstopdelay integer, freesidestatus character varying(32), CONSTRAINT radacct_pkey PRIMARY KEY (radacctid) ) WITH (OIDS=FALSE); ALTER TABLE radacct OWNER TO radius; -- Index: freesidestatus CREATE INDEX freesidestatus ON radacct USING btree (freesidestatus); -- Index: radacct_active_user_idx CREATE INDEX radacct_active_user_idx ON radacct USING btree (username, nasipaddress, acctsessionid) WHERE acctstoptime IS NULL; -- Index: radacct_start_user_idx CREATE INDEX radacct_start_user_idx ON radacct USING btree (acctstarttime, username);

  Read the article

• SFTP ChRoot result in broken pipe

  - by Patrick Pruneau

  I have a website that I want to add some restricted access to a sub-folder. For this, I've decided to use CHROOT with SFTP (I mostly followed this link : http://shapeshed.com/chroot_sftp_users_on_ubuntu_intrepid/) For now, I've created a user (sio2104) and a group (magento).After following the guide, my folder list look like this : -rw-r--r-- 1 root root 27 2012-02-01 14:23 index.html -rw-r--r-- 1 root root 21 2012-02-01 14:24 info.php drwx------ 15 root root 4096 2012-02-25 00:31 magento As you can see, i've chown root:root the folder magento I wanted to jail-in the user and ...everything else by the way. Also in the magento folder, I chown sio2104:magento everything so they can access what they want. Finally, I've added this to sshd_config file : #Subsystem sftp /usr/lib/openssh/sftp-server Subsystem sftp internal-sftp Match Group magento ChrootDirectory /usr/share/nginx/www/magento ForceCommand internal-sftp AllowTCPForwarding no X11Forwarding no PasswordAuthentication yes #UsePAM yes And the result is...well, I can enter my login, password and it's all finished with a "broken pipe" error. $ sftp [email protected].50 [....some debug....] [email protected].50's password: debug1: Authentication succeeded (password). Authenticated to 10.20.0.50 ([10.20.0.50]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. Write failed: Broken pipe Connection closed Verbose mode gives nothing to help. Anyone have an idea of what I've done wrong? If I try to login with ssh or sftp with my personnal user, everything works fine.

  Read the article

• RTNETLINK answers: Invalid argument

  - by LinuxPenseur

  Hi, When my system boots up it shows the following message. Bringing up loopback interface: [ OK ] Bringing up interface eth0: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth1: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth2: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth3: RTNETLINK answers: Invalid argument [ OK ] Why is this happening. Normally it does not give the message RTNETLINK answers: Invalid argument I did ifconfig and the output is eth0 Link encap:Ethernet HWaddr 00:00:50:6D:56:B4 inet addr:120.0.10.137 Bcast:120.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b4/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:214 (214.0 b) Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:00:50:6D:56:B5 inet addr:121.0.10.137 Bcast:121.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:214 (214.0 b) Base address:0xc000 eth2 Link encap:Ethernet HWaddr 00:00:50:6D:56:B6 inet addr:128.0.10.137 Bcast:128.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1006 (1006.0 b) TX bytes:396 (396.0 b) Interrupt:16 eth3 Link encap:Ethernet HWaddr 00:00:50:6D:56:B7 inet addr:123.0.10.137 Bcast:123.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:728 (728.0 b) TX bytes:396 (396.0 b) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:980 (980.0 b) TX bytes:980 (980.0 b) What could be the reason for the message and how to change this to normal? Thanks

  Read the article

• Can any postfix guru assist me determine how emails are still being sent via my server from unauthorized sources?

  - by Dave

  Hi all, I'm getting a little concerned as I run a small server hosting a number of websites and manage the email for a few dozen people. Just recently though I've had a couple of notifications from spamcop alerting me that spam has been sent from my server, and when I have a look over the logs from time to time I can indeed see that there are many repeated attempts of mail being sent from my server. Most of the time it gets knocked back from the destination servers but sometimes its getting through. Unfortunately I'm not linux or postfix expert, I can get by but had though I had my machine locked down quite securely, I don't allow relaying, when I check the online DNS/MX tools they tend to report my server as being OK so I'm not sure where to take it now and hoping someone might be able to throw me a few pointers. I get lots of entries like this in my MAIL.INFO log Jan 2 08:39:34 Debian-50-lenny-64-LAMP postfix/qmgr[15993]: 66B88257C12F: from=<>, size=3116, nrcpt=1 (queue active) Jan 2 08:39:34 Debian-50-lenny-64-LAMP postfix/qmgr[15993]: 614C2257C1BC: from=<[email protected]>, size=2490, nrcpt=3 (queue active) and Jan 7 16:09:37 Debian-50-lenny-64-LAMP postfix/error[6471]: 0A316257C204: to=<[email protected]>, relay=none, delay=384387, delays=384384/3/0/0.01, dsn=4.0.0, status=deferred (delivery temporarily suspended: host mx.fakemx.net[46.4.35.23] refused to talk to me: 421 mx.fakemx.net Service Unavailable) Jan 7 16:09:37 Debian-50-lenny-64-LAMP postfix/error[6470]: 5848C257C20D: to=<[email protected]>, relay=none, delay=384373, delays=384370/3/0/0.01, dsn=4.0.0, status=deferred (delivery temporarily suspended: host mx.fakemx.net[46.4.35.23] refused to talk to me: 421 mx.fakemx.net Service Unavailable) then there tends to be connection timeouts, so from what I see even though I had relaying disabled.. something is getting by and trying to send.. So if you can help that will be greatly appreciated, and any further logging/config info I can supply. Thanks

  Read the article

• Setup: Eclipse in Ubuntu with Apache2 and Subversion

  - by Ricalsin

  Trying to setup Eclispe. I am running ubuntu 10.10 (Maverick). Apache2.2.16 Subversion 1.6.12 The Eclipse help/about/installed software says: Eclipse Platform 3.5.2 Subclipse 1.0.0 Version Control with Subversion 1.1.1 The Subclips wiki I followed is here I have installed the libsvn-java app as discussed. I added the line "-Djava.library.path=/usr/lib/jni" to the eclipse.ini file I checked the Eclipse help/about/confirguration settings and both of these lines are listed: eclipse.vmargs=-Djava.library.path=/usr/lib/jni java.library.path=/usr/lib/jni I checked that those files are in those directories. Still, when I check the preferencesteamsvn an error dialog shows: Failed to load JavaHL Library. These are the errors that were encountered: no libsvnjavahl.1 in java.library.path Incompatible JavaHL library loaded 1.3.x or later required I followed the "Testing JavaHL libraries" troubleshooting section at the bottom of the wiki: I downloaded the tarbal and ran it in a folder on my desktop with no problems. Then, I followed the instructions and placed that file INSIDE the path (usr/lib/jni/testJavaHL) and ran it from there. There are 50 tests performed and each one of them came back with this same error (posting only one for brevity): 50) testCommitRevprops(org.tigris.subversion.javahl.BasicTests)java.io.FileNotFoundException: /usr/lib/jni/testJavaHL/local_tmp/greek_files/iota (No such file or directory) at java.io.FileOutputStream.open(Native Method) at java.io.FileOutputStream.<init>(FileOutputStream.java:209) at java.io.FileOutputStream.<init>(FileOutputStream.java:160) at org.tigris.subversion.javahl.WC.materialize(WC.java:70) at org.tigris.subversion.javahl.SVNTests.buildGreekFiles(SVNTests.java:303) at org.tigris.subversion.javahl.SVNTests.setUp(SVNTests.java:222) at org.tigris.subversion.javahl.RunTests.main(RunTests.java:111) FAILURES!!! Tests run: 50, Failures: 0, Errors: 50 Any ideas as to how/why the "local_tmp/greek_files/iota" is appended to the directory? I assume that's my problem.. I'm also having a problem with newrepository location = ...as the directory location of my svn repository is one level above the home directory - which is prepended to whatever I place in the dialog box - resulting in this error: svn: '/home/ricalsin/file:/home/svn' does not exist Thank you for any help.

  Read the article

• IIS SMTP unable to relay for domain on local network.

  - by MartinHN

  Hi I have a network with the following servers: EXCH01 - Exchange Server for @domain.com e-mails. TEST-REP01 - Local reporting server. Have IIS SMTP installed and configured. What happens on the TEST-REP01, is that I have a Windows Service that reads reports in a SQL server that is ready for delivery. All reports is sent one at a time, using the local SMTP server. It works perfectly, unless the recipient e-mail address is [email protected] - the domain that the EXCH01 server manages. I get the following error: Mailbox unavailable. The server response was: 5.7.1 Unable to relay for [email protected] What can I do to troubleshoot this further? I can't seem to find useful information in the SMTP log: 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 EHLO - +TEST-REP01 250 0 210 15 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 MAIL - +FROM:<[email protected]> 250 0 44 31 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 RCPT - +TO:<[email protected]> 550 0 50 28 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 QUIT - TEST-REP01 240 0 50 28 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 EHLO - +TEST-REP01 250 0 210 15 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 MAIL - +FROM:<[email protected]> 250 0 44 31 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 RCPT - +TO:<[email protected]> 550 0 50 28 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 QUIT - TEST-REP01 240 0 50 28 0 SMTP - - - - Relay access on the local IIS (TEST-REP01) are set to allow 127.0.0.1, TEST-REP01 and other servers such as TEST-WEB01. DNS settings on the local network is not domain.com - but companyname-domain.local.

  Read the article

• OpenSWAN KLIPS not working

  - by bonzi

  I am trying to setup IPSec between 2 VM launched by OpenNebula. I'm using OpenSWAN for that. This is the ipsec.conf file config setup oe=off interfaces=%defaultroute protostack=klips conn host-to-host left=10.141.0.135 # Local IP address connaddrfamily=ipv4 leftrsasigkey=key right=10.141.0.132 # Remote IP address rightrsasigkey=key ike=aes128 # IKE algorithms (AES cipher) esp=aes128 # ESP algorithns (AES cipher) auto=add pfs=yes forceencaps=yes type=tunnel I'm able to establish the connection with netkey but klips doesnt work. ipsec barf shows #71: ERROR: asynchronous network error report on eth0 (sport=500) for message to 10.141.0.132 port 500, complainant 10.141.0.135: No route to host [errno 113, origin ICMP type 3 code 1 (not authenticated)] Tcpdump shows 22:50:20.592685 IP 10.141.0.132.isakmp > 10.141.0.135.isakmp: isakmp: phase 1 I ident 22:50:25.602182 ARP, Request who-has 10.141.0.135 tell 10.141.0.132, length 46 22:50:26.602082 ARP, Request who-has 10.141.0.135 tell 10.141.0.132, length 46 22:50:27.601985 ARP, Request who-has 10.141.0.135 tell 10.141.0.132, length 46 ipsec eroute shows 0 10.141.0.135/32 -> 10.141.0.132/32 => %trap What could be the problem?

  Read the article

• Setup: Eclipse in Ubuntu with Apache2 and Subversion

  - by Ricalsin

  Trying to setup Eclispe. I am running ubuntu 10.10 (Maverick). Apache2.2.16 Subversion 1.6.12 The Eclipse help/about/installed software says: Eclipse Platform 3.5.2 Subclipse 1.0.0 Version Control with Subversion 1.1.1 The Subclips wiki I followed is here I have installed the libsvn-java app as discussed. I added the line "-Djava.library.path=/usr/lib/jni" to the eclipse.ini file I checked the Eclipse help/about/confirguration settings and both of these lines are listed: eclipse.vmargs=-Djava.library.path=/usr/lib/jni java.library.path=/usr/lib/jni I checked that those files are in those directories. Still, when I check the preferencesteamsvn an error dialog shows: Failed to load JavaHL Library. These are the errors that were encountered: no libsvnjavahl.1 in java.library.path Incompatible JavaHL library loaded 1.3.x or later required I followed the "Testing JavaHL libraries" troubleshooting section at the bottom of the wiki: I downloaded the tarbal and ran it in a folder on my desktop with no problems. Then, I followed the instructions and placed that file INSIDE the path (usr/lib/jni/testJavaHL) and ran it from there. There are 50 tests performed and each one of them came back with this same error (posting only one for brevity): 50) testCommitRevprops(org.tigris.subversion.javahl.BasicTests)java.io.FileNotFoundException: /usr/lib/jni/testJavaHL/local_tmp/greek_files/iota (No such file or directory) at java.io.FileOutputStream.open(Native Method) at java.io.FileOutputStream.<init>(FileOutputStream.java:209) at java.io.FileOutputStream.<init>(FileOutputStream.java:160) at org.tigris.subversion.javahl.WC.materialize(WC.java:70) at org.tigris.subversion.javahl.SVNTests.buildGreekFiles(SVNTests.java:303) at org.tigris.subversion.javahl.SVNTests.setUp(SVNTests.java:222) at org.tigris.subversion.javahl.RunTests.main(RunTests.java:111) FAILURES!!! Tests run: 50, Failures: 0, Errors: 50 Any ideas as to how/why the "local_tmp/greek_files/iota" is appended to the directory? I assume that's my problem.. I'm also having a problem with newrepository location = ...as the directory location of my svn repository is one level above the home directory - which is prepended to whatever I place in the dialog box - resulting in this error: svn: '/home/ricalsin/file:/home/svn' does not exist Thank you for any help.

  Read the article

• iptables (DNAT)

  - by user1126425

  I have a host that acts as a gateway for other hosts. The configuration is such that eth0(192.168.1.3) is connected to internet via a router and eth1(172.16.2.50) is connected to internal network via switch. Given that, this host is also running a service that is bound to eth1 and serves the internal network. I want to extend this service to the outside world as well and was trying to manipulate iptables so that any request that comes to this host via eth0 and is directed to 192.168.1.3:80 is send to 172.16.2.50 and internet users can also make use of the service. Here are my iptable rules for setting up the host as gateway (and these work fine): sudo iptables -t nat -A POSTROUTING -s 172.16.2.0/16 -o eth0 -j MASQUERADE sudo iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -o eth1 -j MASQUERADE sudo iptables -A FORWARD -s 172.16.2.0/16 -o eth0 -j ACCEPT sudo iptables -A FORWARD -d 172.16.2.0/16 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT And these are the rules that I am trying to add to the iptables to achieve my ends: sudo iptables -A INPUT -d 192.168.1.3 -p tcp -dport 80 -i eth0 -j ACCEPT sudo iptables -t nat -A PREROUTING -d 192.168.1.3 -p tcp -dport 80 -j DNAT --to-destination 172.16.2.50:80 sudo iptables -t nat -A PREROUTING -s 172.16.2.50 -p tcp -sport 80 -j SNAT --to-source 192.168.1.3:80 sudo iptables -A FORWARD -d 192.168.1.3 -p tcp -dport 80 -m state --state ESTABLISHED,RELATED -j ACCEPT When I do so, I get error like : "multiple -d flags not allowed" ... Can someone tell me how to resolve this error... and do the entries that I want to add will serve my purpose ? Thanks!

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >