Search Results

Search found 479 results on 20 pages for 'allen dang'.

Page 19/20 | < Previous Page | 15 16 17 18 19 20  | Next Page >

• System locking up with suspicious messages about hard disk

  - by Chris Conway

  My system has started behaving strangely, intermittently locking up. I see messages like the following in syslog: Nov 18 22:22:00 claypool kernel: [ 3428.078156] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Nov 18 22:22:00 claypool kernel: [ 3428.078163] ata3.00: irq_stat 0x40000000 Nov 18 22:22:00 claypool kernel: [ 3428.078167] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Nov 18 22:22:00 claypool kernel: [ 3428.078182] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 22:22:00 claypool kernel: [ 3428.078184] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) Nov 18 22:22:00 claypool kernel: [ 3428.078188] ata3.00: status: { DRDY } Nov 18 22:22:00 claypool kernel: [ 3428.080887] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Nov 18 22:22:00 claypool kernel: [ 3428.080890] ata3.00: irq_stat 0x40000000 Nov 18 22:22:00 claypool kernel: [ 3428.080893] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Nov 18 22:22:00 claypool kernel: [ 3428.080905] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 22:22:00 claypool kernel: [ 3428.080906] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) Nov 18 22:22:00 claypool kernel: [ 3428.080910] ata3.00: status: { DRDY } And then this: Nov 18 23:13:56 claypool kernel: [ 6544.000798] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Nov 18 23:13:56 claypool kernel: [ 6544.000804] ata1.00: failed command: FLUSH CACHE EXT Nov 18 23:13:56 claypool kernel: [ 6544.000814] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 23:13:56 claypool kernel: [ 6544.000815] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout) Nov 18 23:13:56 claypool kernel: [ 6544.000819] ata1.00: status: { DRDY } Nov 18 23:13:56 claypool kernel: [ 6544.000825] ata1: hard resetting link Nov 18 23:14:01 claypool kernel: [ 6549.360324] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:06 claypool kernel: [ 6554.008091] ata1: COMRESET failed (errno=-16) Nov 18 23:14:06 claypool kernel: [ 6554.008103] ata1: hard resetting link Nov 18 23:14:11 claypool kernel: [ 6559.372246] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:16 claypool kernel: [ 6564.020228] ata1: COMRESET failed (errno=-16) Nov 18 23:14:16 claypool kernel: [ 6564.020235] ata1: hard resetting link Nov 18 23:14:21 claypool kernel: [ 6569.380109] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:31 claypool kernel: [ 6579.460243] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 18 23:14:31 claypool kernel: [ 6579.486595] ata1.00: configured for UDMA/133 Nov 18 23:14:31 claypool kernel: [ 6579.486601] ata1.00: retrying FLUSH 0xea Emask 0x4 Nov 18 23:14:31 claypool kernel: [ 6579.486939] ata1.00: device reported invalid CHS sector 0 Nov 18 23:14:31 claypool kernel: [ 6579.486952] ata1: EH complete Nov 18 23:17:01 claypool CRON[3910]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Nov 18 23:17:01 claypool CRON[3908]: (CRON) error (grandchild #3910 failed with exit status 1) Nov 18 23:17:01 claypool postfix/sendmail[3925]: fatal: open /etc/postfix/main.cf: No such file or directory Nov 18 23:17:01 claypool CRON[3908]: (root) MAIL (mailed 1 byte of output; but got status 0x004b, #012) Nov 18 23:39:01 claypool CRON[4200]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm) There are no messages marked after 23:39. When I next tried to use the machine, it would not return from the screensaver (blank screen), nor switch to another terminal, and I had to hard reboot it. [UPDATE] The output of smartctl is here. I had trouble getting this, because / is being mounted read-only (?!), which prevents most applications from running. Also, it may not be related, but I have the following worrying messages in dmesg: [ 10.084596] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 10.098477] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 10.098483] ACPI: resource nForce2_smbus [io 0x0700-0x073f] conflicts with ACPI region SM00 [??? 0x00000700-0x0000073f flags 0x30] [ 10.098486] ACPI: This conflict may cause random problems and system instability [ 10.098487] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.098509] i2c i2c-1: nForce2 SMBus adapter at 0x700 [ 10.112570] Linux agpgart interface v0.103 [ 10.155329] atk: Resources not safely usable due to acpi_enforce_resources kernel parameter [ 10.161506] it87: Found IT8712F chip at 0x290, revision 8 [ 10.161517] it87: VID is disabled (pins used for GPIO) [ 10.161527] it87: in3 is VCC (+5V) [ 10.161528] it87: in7 is VCCH (+5V Stand-By) [ 10.161560] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region ECRE [??? 0x00000290-0x000002af flags 0x45] [ 10.161562] ACPI: This conflict may cause random problems and system instability [ 10.161564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [UPDATE 2] I swapped in a new SATA cable, per Phil's suggestion. The current output of smartctl is here, if it helps. [UPDATE 3] I don't think the cable fixed it. The system hasn't locked up yet, but my media player crashed a few minutes ago and I have the following in the syslog: Nov 20 16:07:17 claypool kernel: [ 2294.400033] ata1: link is slow to respond, please be patient (ready=0) Nov 20 16:07:47 claypool kernel: [ 2324.084581] ata1: COMRESET failed (errno=-16) Nov 20 16:07:47 claypool kernel: [ 2324.084588] ata1: limiting SATA link speed to 1.5 Gbps Nov 20 16:07:47 claypool kernel: [ 2324.084592] ata1: hard resetting link I get the following response from smartctl: $ sudo smartctl -a /dev/sda [sudo] password for chris: sudo: Can't open /var/lib/sudo/chris/0: Read-only file system smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: /0:0:0:0 Version: scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46 >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

  Read the article

• How did I get here? My route to Android, iPhone, Windows Phone 7, and interest in Mobile Devices

  - by Wallym

  I get asked all the time how/why I got interested in mobile and jumped on this fairly early.  I tend to give half answers because it wasn't just one thing that took me to mobile, but a whole host of separate ivents culminating in a specific event where I wasdoing market research in May/June 2008.  Let me throw out the events and the facts about me: I tend to like new, different, cool stuff.  I jumped on .NET early on.  I jumped on Ajax early on.  I don't jump on every new technology that comes down the road, I'm probably the only person on the planet that doesn't "get" MVC, though I acknowledge that a lot of people do and it solves a number of problems in the default settings of ASP.NET WebForms. I remember buying an early Windows CE device. It was interesting, but dang, this stylus thing sucks. After I lost my third stylus, i just gave up.  I got my first mobile phone in early 1999.  Reception was crappy, but I could see the value in being mobile. In 1999, I worked on a manufacturing systems project.  One piece of the projects was a set of handheld devices on the shop floor.  While the UI was a crappy DOS based, yes I said DOS as in Disk Operating System Version 6.22, I could see that the wireless world was a direction I wanted to be in. In 2000, Microsoft released the first public alpha of .NET.  Very cool stuff indeed.  One piece of the puzzle was a set of mobile controls for ASP.NET.  I build numerous test apps as well as mobile version using these mobile controls.  Now, the mobile UIs of the time were based on WML, which was crap. I could real all the analysis of mobile and read all about growth rates.  Now, you have to realize that growth rates can be impressive when dealing with small numbers, but I knew it was a comer. In our first book, I got talked out of mobile because of the line from the publisher "Wally, mobile doesn't sell." Blackberry was the dominant device of the mid 2000s.  Its users were referred to as "Crackberry addicts."  Unfortunately, the mobile development experience for native apps was crap and the web experience was fairly rough as well, but if they could get the ecosystem started, other phones and better blackberryies would come out.  I finally jumped into using a blackberry. Sometime around 2006, I heard "Wally, mobile doesn't sell" again.  Now, anyone that knows me knows that someone saying something like this to me means I'll keep trying it. The phones of the mid 2000s were moving to be more graphical, but there were too many that had this idea that they had to use a stylus.  Stylus suck.  They get lost too easily. I worked on a project in 2007 and 2008 for a startup trying to answer the question of "What is there to do where I am at?"  For some reason, they wanted to be tied to PCs.  As it became obvious that they were having problems, their investor asked us to do some market research and to figure out what the marketplace did want.  One of the important things that I figured out was the we lived in a mobile world and if you had a mobile app, it need to be on a mobile device, not tied to a desktop/laptop/netbook device.  If there was any single event, this was it - I was doing some market research and sat and talked to people in a bar/restaurant in Atlanta called "The Grove" on Lavista.  The consensus of the people that I talked to was that they wanted their data where ever they were at, laptop, pc, mobile, whereever. In 2007, Apple released the iPhone.  Wow, what an impressive device, even with all the problems of a 1st generation device.  I bought an iPod Touch 1st generation to understand touch better, one of the best decisions I ever made. I decided in late 2008, to make a move into cloud, for a number of reasons.  I was working on an example app.  In April, 2009, one of my friends at Microsoft said "don't mention my name with this, but you need an iPhone front end for this app."  How do you get on the iPhone.  Well, there are a number of ways including: ObjectiveC.  Its hard to teach an old dog new tricks, and this dog knows .NET, not ObjectiveC. HTML, web, javascript optimized interface.  yeah, this is possible. PhoneGap.  Now, this is interesting, take an html interface and get it to run on the iPhone, Android, Blackberry, and other platforms.  I thought that this way made the most sense for me until......... MonoTouch.  In May/June 2009, Novell announced a way for .NET/c# developers to write apps for the iPhone.  This is the way that made the most sense to me. Titanium by Appcelerator.  This is similar in concept to PhoneGap.  I haven't played with this much but do want to learn more about it. In July, 2009, I emailed one of my contacts at Wrox to see if they would be interested in a short MonoTouch ebook in their Wrox Blox format.  I fully expected another  response along the lines of "Wally, mobile doesn't sell."  The response I got was "Wally, iPhone is H O T, get started immediately, can you have this to me before Labor Day."  Not quite the response I expected.  Thankfully, we didn't make the Labor Day, first draft date. I kept pushing back because I had a feeling that things were not going to be quite as polished and feature rich as necessary.  After all, Novell doesn't have the resouces of Microsoft's developer division. The ebook shipped on November 30, 2009. On about December, 15, 2009, my editor emailed and said "Your ebook is selling really well, lets do a full book and it by March 1 so get started."  Thankfully, guys like Craig Dunn and Chris Hardy were interested along with Martin and Ror joinged us later on. I bought my wife an iPhone 3Gs in early 2010 to go along with all my iPod Touch devices. I tried to pretend in 2010 that I wasn't that interested in mobile and still had interest in the desktop technologies.  I love the technologies and continue to use them today, but that isn't where my interest is right now.  I'm just about all mobile all the time with my energies.  Our book shipped in the beginning of July, 2010 right in the middle of the Apple FUD.I've been looking at Mobile Web as a way around the AppStores and Apple FUD problems of 2010. With all the Apple self FUD, we became interested in Android.I went up to Dino Esposito at DevConnections in Las Vegas at introduced myself. I've always tried to keep up with what Dino has been doing. I was shocked, he wanted to meet me.  We must have talked for 1.5 hours. It was way more time than I deserved. If you get a chance, go and introduce yourself to Dino. He's a great guy. Microsoft released Windows Phone 7 in the Fall of 2010.  I'm not doing development on that platform at this time.  I think they have a very interesting user interface.  The devices are being positively reviewed.  For my purposes, the devices are limited at this point in time.  We'll see what 2011 brings as far as updates to the operating system.  I need multitasking/background processing and html5 in the browser. Add that as well as acceptance in the marketplace and I'll be more interested in the device. Obviosuly, I'm now working on a MonoDroid book . I own Android and iPhone/iOS devices.  I am currently working on some startup ideas and am exploring as much in that area as I can. For 2011, I'm planning on speaking at Android Developer's Conference (AnDevCon) and Mobile Connections.  I'm really excited about this. I have a couple of magazine articles coming out in 2011 on Android and iPhone development with the Mono technologies.is Mono "The Answer"? What's "The Question?" I think it will work for me.  It might work for you, it might not.  it depends on your situation.  Its the current horse that I am riding. I might find a better horse tomorrow. So, that's how I got here.  I'm in love with mobile.  Mobile native apps on the device as well as mobile web.  I'm into all this cool stuff.  Where are you at?

  Read the article

• CodePlex Daily Summary for Sunday, September 09, 2012

  CodePlex Daily Summary for Sunday, September 09, 2012Popular ReleasesMishra Reader: Mishra Reader Beta 4: Additional bug fixes and logging in this release to try to find the reason some users aren't able to see the main window pop up. Also, a few UI tweaks to tighten up the feed item list. This release requires the final version of .NET 4.5. If the ClickOnce installer doesn't work for you, please try the additional setup exe.Xenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.9.0: Release Notes Imporved framework architecture Improved the framework security More import/export formats and operations New WebPortal application which includes forum, new, blog, catalog, etc. UIs Improved WebAdmin app. Reports, navigation and search Perfomance optimization Improve Xenta.Catalog domain More plugin interfaces and plugin implementations Refactoring Windows Azure support and much more... Package Guide Source Code - package contains the source code Binaries...Json.NET: Json.NET 4.5 Release 9: New feature - Added JsonValueConverter Fix - Fixed DefaultValueHandling.Ignore not igoring default values of non-nullable properties Fix - Fixed DefaultValueHandling.Populate error with non-nullable properties Fix - Fixed error when writing JSON for a JProperty with no value Fix - Fixed error when calling ToList on empty JObjects and JArrays Fix - Fixed losing decimal precision when writing decimal JValuesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.66: Just going to bite the bullet and rip off the band-aid... SEMI-BREAKING CHANGE! Well, it's a BREAKING change to those who already adjusted their projects to use the previous breaking change's ill-conceived renamed DLLs (versions 4.61-4.65). For those who had not adapted and were still stuck in this-doesn't-work-please-fix-me mode, this is more like a fixing change. The previous breaking change just broke too many people, I'm sorry to say. Renaming the DLL from AjaxMin.dll to AjaxMinLibrary.dl...DotNetNuke® Community Edition CMS: 07.00.00 CTP (Not for Production Use): NOTE: New Minimum Requirementshttp://www.dotnetnuke.com/Portals/25/Blog/Files/1/3418/Windows-Live-Writer-1426fd8a58ef_902C-MinimumVersionSupport_2.png Simplified InstallerThe first thing you will notice is that the installer has been updated. Not only have we updated the look and feel, but we also simplified the overall install process. You shouldn’t have to click through a series of screens in order to just get your website running. With the 7.0 installer we have taken an approach that a...BIDS Helper: BIDS Helper 1.6.1: In addition to fixing a number of bugs that beta testers reported, this release includes the following new features for Tabular models in SQL 2012: New Features: Tabular Display Folders Tabular Translations Editor Tabular Sync Descriptions Fixed Issues: Biml issues 32849 fixing bug in Tabular Actions Editor Form where you type in an invalid action name which is a reserved word like CON or which is a duplicate name to another action 32695 - fixing bug in SSAS Sync Descriptions whe...Umbraco CMS: Umbraco 4.9.0: Whats newThe media section has been overhauled to support HTML5 uploads, just drag and drop files in, even multiple files are supported on any HTML5 capable browser. The folder content overview is also much improved allowing you to filter it and perform common actions on your media items. The Rich Text Editor’s “Media” button now uses an embedder based on the open oEmbed standard (if you’re upgrading, enable the media button in the Rich Text Editor datatype settings and set TidyEditorConten...menu4web: menu4web 0.4.1 - javascript menu for web sites: This release is for those who believe that global variables are evil. menu4web has been wrapped into m4w singleton object. Added "Vertical Tabs" example which illustrates object notation.Microsoft SQL Server Product Samples: Database: AdventureWorks OData Feed: The AdventureWorks OData service exposes resources based on specific SQL views. The SQL views are a limited subset of the AdventureWorks database that results in several consuming scenarios: CompanySales Documents ManufacturingInstructions ProductCatalog TerritorySalesDrilldown WorkOrderRouting How to install the sample You can consume the AdventureWorks OData feed from http://services.odata.org/AdventureWorksV3/AdventureWorks.svc. You can also consume the AdventureWorks OData fe...Desktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)Lightweight Fluent Workflow: objectflow 1.4.0.1: Changes in this release;Exception handling policies Install on NuGet console; Install-Package objectflow.core -pre Supported work-flow patterns Exception policies Sequence Parallel split Simple merge Exclusive choice Retry Arbitrary cycles Framework Features Handle exceptions with workflow.Configure().On<Exception>() Repeat operations and functions an arbitrary number of times Retry failed lamda functions Generic interface for concise workflow registration Operations t...Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...LibXmlSocket: Binary: .net4.5,.netCore???????Hidden Capture (HC): Hidden Capture 1.1: Hidden Capture 1.1 by Mohsen E.Dawatgar http://Hidden-Capture.blogfa.comThe Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.New ProjectsAjax based Multi Forms ASP.NET Framework (Amfan): Ajax based Multi Forms ASP.NET Framework (Amfan) reduces the limitations of the Asp.Net by creating multiple sub-forms of the page as separate aspx pages.APO-CS: A straight port of Apophysis to C#.BaceCP / ???? ????? ?? ???????? ????: BaceCP e ??????????? ???????? ?? ????????, ??????????? ? ????????? ?? ???? ????? ?? ???????? ????.CafeAdm Messenger: CafeAdm Messenger Allows a server connection for CafeAdm Schedule and MessengerDECnet 2.0 Router: A user mode DECnet 2.0 router that will interoperate with the HECnet bridge.DriveManager: This is a common utility to provide an interface for all cloud based drive providers like google drive, dropbox, MS Sky Drive. Email Tester: This utility will help you check your SMTP settings for SharePoint. It is best for Pre-PROD and PROD environment where you can't modify code.EvoGame: The evo game that im working onforebittims: Project Owner : ForeBitt Inc. Sri Lanka Project Manager : Chackrapani Wickramarathne Technologies : VS 2010, C#, Linq to Sql, Sql server 2008 R2, Dev ExpressMCServe: MCServe is the minecraft-server which takes advantage of the performance of the .NET FrameworkMental: Ðang trong quá trình phát tri?nSalaryManagementSys: SalaryManagementSysVKplay: This application is audio player, launches on windows phone platform and uses music from vk.com social network.

  Read the article

• Reverse proxy for a REST web service using ADFS/AD and WebApi

  - by Kai Friis

  I need to implement a reverse proxy for a REST webservice behind a firewall. The reverse proxy should authenticate against an enterprise ADFS 2.0 server, preferably using claims in .net 4.5. The clients will be a mix of iOS, Android and web. I’m completely new to this topic; I’ve tried to implement the service as a REST service using WebApi, WIF and the new Identity and Access control in VS 2012, with no luck. I have also tried to look into Brock Allen’s Thinktecture.IdentityModel.45, however then my head was spinning so I didn’t see the difference between it and Windows Identity Foundation with the Identity and Access control. So I think I need to step back and get some advice on how to do this. There are several ways to this, as far as I understand it. In hardware. Set up our Citrix Netscaler as a reverse proxy. I have no idea how to do that, however if it’s a good solution I can always hire someone who knows… Do it in the webserver, like IIS. I haven’t tried it; do not know if it will work. Create a web service to do it. 3.1 Implement it as a SOAP service using WCF. As I understand it ADFS do not support REST so I have to use SOAP. The problem is mobile device do not like SOAP, neither do I… However if it’s the best way, I have to do it. 3.2 Use Azure Access Control Service. It might work, however the timing is not good. Our enterprise is considering several cloud options, and us jumping on the azure wagon on our own might not be the smartest thing to do right now. However if it is the only options, we can do it. I just prefer not to use it right now. Right now I feel there are too many options, and I do not know which one will work. If someone can point me in the right directions, which path to pursue, I would be very grateful.

  Read the article

• :contains for multiple words

  - by Emin

  I am using the following jQuery var etag='kate' if (etag.length > 0) { $('div').each(function () { $(this).find('ul:not(:contains(' + etag + '))').hide(); $(this).find('ul:contains(' + etag + ')').show(); }); }? towards the following HTML <div id="2"> <ul> <li>john</li> <li>jack</li> </ul> <ul> <li>kate</li> <li>clair</li> </ul> <ul> <li>hugo</li> <li>desmond</li> </ul> <ul> <li>said</li> <li>jacob</li> </ul> </div> <div id="3"> <ul> <li>jacob</li> <li>me</li> </ul> <ul> <li>desmond</li> <li>george</li> </ul> <ul> <li>allen</li> <li>kate</li> </ul> <ul> <li>salkldf</li> <li>3kl44</li> </ul> </div> basically, as long as etag has one word, the code works perfectly and hides those elements who do not contain etag. My problem is, when etag is multiple words (and I don't have control over it. Its coming from a database and could be combination of multiple words seperated with space char) then the code does not work.. is there any way to achieve this?

  Read the article

• How to use Crtl in a Delphi unit in a C++Builder project? (or link to C++Builder C runtime library)

  - by Craig Peterson

  I have a Delphi unit that is statically linking a C .obj file using the {$L xxx} directive. The C file is compiled with C++Builder's command line compiler. To satisfy the C file's runtime library dependencies (_assert, memmove, etc), I'm including the crtl unit Allen Bauer mentioned here. unit FooWrapper; interface implementation uses Crtl; // Part of the Delphi RTL {$L FooLib.obj} // Compiled with "bcc32 -q -c foolib.c" procedure Foo; cdecl; external; end. If I compile that unit in a Delphi project (.dproj) everthing works correctly. If I compile that unit in a C++Builder project (.cbproj) it fails with the error: [ILINK32 Error] Fatal: Unable to open file 'CRTL.OBJ' And indeed, there isn't a crtl.obj file in the RAD Studio install folder. There is a .dcu, but no .pas. Trying to add crtdbg to the uses clause (the C header where _assert is defined) gives an error that it can't find crtdbg.dcu. If I remove the uses clause, it instead fails with errors that __assert and _memmove aren't found. So, in a Delphi unit in a C++Builder project, how can I export functions from the C runtime library so they're available for linking? I'm already aware of Rudy Velthuis's article. I'd like to avoid manually writing Delphi wrappers if possible, since I don't need them in Delphi, and C++Builder must already include the necessary functions. Edit For anyone who wants to play along at home, the code is available in Abbrevia's Subversion repository at https://tpabbrevia.svn.sourceforge.net/svnroot/tpabbrevia/trunk. I've taken David Heffernan's advice and added a "AbCrtl.pas" unit that mimics crtl.dcu when compiled in C++Builder. That got the PPMd support working, but the Lzma and WavPack libraries both fail with link errors: [ILINK32 Error] Error: Unresolved external '_beginthreadex' referenced from ABLZMA.OBJ [ILINK32 Error] Error: Unresolved external 'sprintf' referenced from ABWAVPACK.OBJ [ILINK32 Error] Error: Unresolved external 'strncmp' referenced from ABWAVPACK.OBJ [ILINK32 Error] Error: Unresolved external '_ftol' referenced from ABWAVPACK.OBJ AFAICT, all of them are declared correctly, and the _beginthreadex one is actually declared in AbLzma.pas, so it's used by the pure Delphi compile as well. To see it yourself, just download the trunk (or just the "source" and "packages" directories), disable the {$IFDEF BCB} block at the bottom of AbDefine.inc, and try to compile the C++Builder "Abbrevia.cbproj" project.

  Read the article

• A faulty Caviar Blue hard drive?

  - by Glister

  We have a small "homemade" server running fully updated Debian Wheezy (amd64). One hard drive installed: WDC WD6400AAKS. The motherboard is ASUS M4N68T V2. The usual load: CPU: an average of 20% Each week about 50GB of additional space is occupied. About 47GB of uploaded files and 3GB of MySQL data. I'm afraid that the hard drive may be about to fail. I saw Pre-fail on few places when I ran: root@SERVER:/tmp# smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD6400AAKS-XXXXXXX Serial Number: WD-XXXXXXXXXXXXXXXXXXX LU WWN Device Id: 5 0014ee XXXXXXXXXXXXX Firmware Version: 01.03B01 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Oct 28 18:55:27 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: (11580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 136) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 157 146 021 Pre-fail Always - 5108 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2968 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15445 10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2950 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 426 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2968 194 Temperature_Celsius 0x0022 111 095 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 160 000 Old_age Always - 21716 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15444 - Error SMART Read Selective Self-Test Log failed: scsi error aborted command Smartctl: SMART Selective Self Test Log Read Failed root@SERVER:/tmp# In one tutorial I read that the pre-fail is a an indication of coming failure, in another tutorial I read that it is not true. Can you guys help me decode the output of smartctl? It would be also nice to share suggestions what should I do if I want to ensure data integrity (about 50GB of new data each week, up to 2TB for the whole period I'm interested in). Maybe I will go with 2x2TB Caviar Black in RAID4?

  Read the article

• Making sense of S.M.A.R.T

  - by James

  First of all, I think everyone knows that hard drives fail a lot more than the manufacturers would like to admit. Google did a study that indicates that certain raw data attributes that the S.M.A.R.T status of hard drives reports can have a strong correlation with the future failure of the drive. We find, for example, that after their first scan error, drives are 39 times more likely to fail within 60 days than drives with no such errors. First errors in re- allocations, offline reallocations, and probational counts are also strongly correlated to higher failure probabil- ities. Despite those strong correlations, we find that failure prediction models based on SMART parameters alone are likely to be severely limited in their prediction accuracy, given that a large fraction of our failed drives have shown no SMART error signals whatsoever. Seagate seems like it is trying to obscure this information about their drives by claiming that only their software can accurately determine the accurate status of their drive and by the way their software will not tell you the raw data values for the S.M.A.R.T attributes. Western digital has made no such claim to my knowledge but their status reporting tool does not appear to report raw data values either. I've been using HDtune and smartctl from smartmontools in order to gather the raw data values for each attribute. I've found that indeed... I am comparing apples to oranges when it comes to certain attributes. I've found for example that most Seagate drives will report that they have many millions of read errors while western digital 99% of the time shows 0 for read errors. I've also found that Seagate will report many millions of seek errors while Western Digital always seems to report 0. Now for my question. How do I normalize this data? Is Seagate producing millions of errors while Western digital is producing none? Wikipedia's article on S.M.A.R.T status says that manufacturers have different ways of reporting this data. Here is my hypothesis: I think I found a way to normalize (is that the right term?) the data. Seagate drives have an additional attribute that Western Digital drives do not have (Hardware ECC Recovered). When you subtract the Read error count from the ECC Recovered count, you'll probably end up with 0. This seems to be equivalent to Western Digitals reported "Read Error" count. This means that Western Digital only reports read errors that it cannot correct while Seagate counts up all read errors and tells you how many of those it was able to fix. I had a Seagate drive where the ECC Recovered count was less than the Read error count and I noticed that many of my files were becoming corrupt. This is how I came up with my hypothesis. The millions of seek errors that Seagate produces are still a mystery to me. Please confirm or correct my hypothesis if you have additional information. Here is the smart status of my western digital drive just so you can see what I'm talking about: james@ubuntu:~$ sudo smartctl -a /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD1001FALS-00E3A0 Serial Number: WD-WCATR0258512 Firmware Version: 05.01D05 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 10 19:52:28 2010 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 179 175 021 Pre-fail Always - 4033 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 270 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1468 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 262 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 46 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 223 194 Temperature_Celsius 0x0022 105 102 000 Old_age Always - 42 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

  Read the article

• smartctl -t long isn't finishing

  - by xenoterracide

  I been running smartctl -t long on a drive for about 2 days now and it seems to be stalled at 10%. short and conveyance both passed. I have to send 1 of 2 drives purchased back I found badblocks with badblocks (none on this drive and I'ts made over a pass already). I'm just wondering if I should be concerned about this. smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD10EARS-00Y5B1 Serial Number: WD-WMAV51582123 Firmware Version: 80.00A80 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon May 10 22:19:52 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 241) Self-test routine in progress... 10% of test remaining. Total time to complete Offline data collection: (20100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 231) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2 3 Spin_Up_Time 0x0027 131 131 021 Pre-fail Always - 6408 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 12 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 148 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 174 194 Temperature_Celsius 0x0022 106 102 000 Old_age Always - 41 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 99 - # 2 Extended offline Interrupted (host reset) 10% 30 - # 3 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• CodePlex Daily Summary for Friday, August 15, 2014

  CodePlex Daily Summary for Friday, August 15, 2014Popular ReleasesGoogle .Net API: Drive.Sample: Google .NET Client API – Drive.SampleInstructions for the Google .NET Client API – Drive.Sample</h2> http://code.google.com/p/google-api-dotnet-client/source/browse/?repo=samples#hg%2FDrive.SampleBrowse Source, or main file http://code.google.com/p/google-api-dotnet-client/source/browse/Drive.Sample/Program.cs?repo=samplesProgram.cs <h3>1. Checkout Instructions</h3> <p><b>Prerequisites:</b> Install Visual Studio, and <a href="http://mercurial.selenic.com/">Mercurial</a>.</p> ...FineUI - jQuery / ExtJS based ASP.NET Controls: FineUI v4.1.1: -??Form??????????????（???-5929）。 -?TemplateField??ExpandOnDoubleClick、ExpandOnEnter、ExpandToSelectRow????（LZOM-5932）。 -BodyPadding???????，??“5”“5 10”，???????????“5px”“5px 10px”。 -??TriggerBox?EnableEdit=false????，??????????????（Jango_Jing-5450）。 -???????????DataKeyNames???????????（yygy-6002）。 -????????????????????????（Gnid-6018）。 -??PageManager???AutoSizePanelID????，??????????????????（yygy-6008）。 -?FState???????????????，????????????????（????-5925）。 -??????OnClientClick???return?????????（FineU...SEToolbox: SEToolbox 01.042.020 Release 1: Updated Mod support. On startup, only stock items will appear in the Components list. Upon selecting and loading a saved world, the mods for that world only will then be loaded, and only from the local drive. If a mod has not been downloaded in Space Engineers, it will not download it for you. If you are developing a Mod, hitting "Reload" will also reload the mods as well as the saved world. If SEToolbox is crashing when loading a saved world containing mods, it is most likely because one ...Gum UI Tool: Gum 0.6.09: Fixed bug which would not allow plugins to be loaded when the app was distributed. Added animation plugin7zbackup - PowerShell Script to Backup Files with 7zip: 7zBackup v. 1.9.8 Stable: Do you like this piece of software ? It took some time and effort to develop. Please consider helping me with a donation Feat : Lock file now holds process ID and RootDir. On subsequent launches script checks if previous process is still alive. In case it is not it will clean up orphaned junction root directory. Ensure no orphaned rootdirs are on disk and no lockfiles in %temp% directory before running this releaseDNN CMS Platform: 07.03.02: Major Highlights Fixed backwards compatibility issue with 3rd party control panels Fixed issue in the drag and drop functionality of the File Uploader in IE 11 and Safari Fixed issue where users were able to create pages with the same name Fixed issue that affected older versions of DNN that do not include the maxAllowedContentLength during upgrade Fixed issue that stopped some skins from being upgraded to newer versions Fixed issue that randomly showed an unexpected error during us...WordMat: WordMat for Mac: WordMat for Mac has a few limitations compared to the Windows version - Graph is not supported (Gnuplot, GeoGebra and Excel works) - Units are not supported yet (Coming up) The Mac version is yet as tested as the windows version.ConEmu - Windows console with tabs: ConEmu 140814 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" HP OneView PowerShell Library: HP OneView PowerShell Library 1.10.1193: Branch to HP OneView 1.10 Release. NOTE: This library version does not support older appliance versions. Fixed New-HPOVProfile to check for Firmware and BIOS management for supported platforms. Would erroneously error when neither -firmware or -bios were passed. Fixed Remove-HPOV* cmdlets which did not handle -force switch parameter correctly Fixed New-HPOVUplinkSet and New-HPOVNetwork Fixed Download-File where HTTP stream compression was not handled, resulting in incorrectly writt...NeoLua (Lua for .net dynamic language runtime): NeoLua-0.8.17: Fix: table.insert Fix: table auto convert Fix: Runtime-functions were defined as private it should be internal. Fix: min,max MichaelSenko release.MFCMAPI: August 2014 Release: Build: 15.0.0.1042 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010/2013 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeOooPlayer: 1.1: Added: Support for speex, TAK and OptimFrog files Added: An option to not to load cover art Added: Smaller package size Fixed: Unable to drag&drop audio files to playlist Updated: FLAC, WacPack and Opus playback libraries Updated: ID3v1 and ID3v2 tag librariesEWSEditor: EwsEditor 1.10 Release: • Export and import of items as a full fidelity steam works - without proxy classes! - I used raw EWS POSTs. • Turned off word wrap for EWS request field in EWS POST windows. • Several windows with scrolling texts boxes were limiting content to 32k - I removed this restriction. • Split server timezone info off to separate menu item from the timezone info windows so that the timezone info window could be used without logging into a mailbox. • Lots of updates to the TimeZone window. • UserAgen...Python Tools for Visual Studio: 2.1 RC: Release notes for PTVS 2.1 RC We’re pleased to announce the release candidate for Python Tools for Visual Studio 2.1. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, editing, IntelliSense, interactive debugging, profiling, Microsoft Azure, IPython, and cross-platform debugging support. PTVS 2.1 RC is available for: Visual Studio Expre...Sense/Net ECM - Enterprise CMS: SenseNet 6.3.1 Community Edition: Sense/Net 6.3.1 Community EditionSense/Net 6.3.1 is an important step toward a more modular infrastructure, robustness and maintainability. With this release we finally introduce a packaging and a task management framework, and the Image Editor that will surely make the job of content editors more fun. Please review the changes and new features since Sense/Net 6.3 and give a feedback on our forum! Main new featuresSnAdmin (packaging framework) Task Management Image Editor OData REST A...Fluffy: Fluffy 0.3.35.4: Change log: Text editorSKGL - Serial Key Generating Library: SKGL Extension Methods 4 (1.0.5.1): This library contains methods for: Time change check (make sure the time has not been changed on the client computer) Key Validation (this will use http://serialkeymanager.com/ to validate keys against the database) Key Activation (this will, depending on the settings, activate a key with a specific machine code) Key Activation Trial (allows you to update a key if it is a trial key) Get Machine Code (calculates a machine code given any hash function) Get Eight Byte Hash (returns an...Touchmote: Touchmote 1.0 beta 13: Changes Less GPU usage Works together with other Xbox 360 controls Bug fixesModern UI for WPF: Modern UI 1.0.6: The ModernUI assembly including a demo app demonstrating the various features of Modern UI for WPF. BREAKING CHANGE LinkGroup.GroupName renamed to GroupKey NEW FEATURES Improved rendering on high DPI screens, including support for per-monitor DPI awareness available in Windows 8.1 (see also Per-monitor DPI awareness) New ModernProgressRing control with 8 builtin styles New LinkCommands.NavigateLink routed command New Visual Studio project templates 'Modern UI WPF App' and 'Modern UI W...ClosedXML - The easy way to OpenXML: ClosedXML 0.74.0: Multiple thread safe improvements including AdjustToContents XLHelper XLColor_Static IntergerExtensions.ToStringLookup Exception now thrown when saving a workbook with no sheets, instead of creating a corrupt workbook Fix for hyperlinks with non-ASCII Characters Added basic workbook protection Fix for error thrown, when a spreadsheet contained comments and images Fix to Trim function Fix Invalid operation Exception thrown when the formula functions MAX, MIN, and AVG referenc...New Projectsapple TV: Apple TV project homepageArma 3 Battle Eye Client: Arma3BEClientASP.NET MVC AngularJS w/ Google Maps API: ASP.NET MVC sample using Google Maps API w/ AngularJS.CC-Classwork: Classwork from CoderCampsCompanyPortal: CompanyPortalcore: Building an Internet of Things (IoT, also Cloud of Things or CoT) core, drawing inspirations from the pre-existing Linus Torvalds linux kernel made from GNU/nixCRM Early Bound Class Simplifier: Simplifies the creation of a Dynamics CRM Early Bound Class. Dirección Desconcentrada de Cultura: Este proyecto web se ha elaborado para la dirección desconcentrada de cultura de cajamarca a cargo de los practicantes de UPNC Sitemas computacionales.Energy Trail Site: NGO Site for designing and collaboration work.Hybrid Platform - Build anything: A Platform that built by loosely coupled architecture. You can build applications for Web, Desktop, Mobile, WCF Services - ASP.NET MVC on this concrete platformipad air: a web tool to sim display same as ipad airipad apps: A serices to support Ipad HD devise to request CURD for codeplex.comiphone 6: iphone6iphone air: Opend API lists for IPhone 6(iphone air)iphone apps: Bus API for iphoneiwatch: A priview version for iwtach API Named Colors in Silverlight: This project is a Silverlight dll to add the missing named colors from System.Windows.Media.Color. Once added as a reference, it makes using named colors easy!OOP_2113110295: Name: Nguyen Trung Thao ID 2113110295 Truong Cao Dang Cong Thuong Mon: OOPPagepark: PageparkProjektRepository: Eine virtuelle Forschungsumgebung (VFU) um Forschungsdaten und Artefakte zu sammeln, gemeinsam zu nutzen, erschließen und mit Metadaten anreichern zu könnenRamonaSniffer: This will be the repository to host the zigbee snifferseawol: A Blog system base on node.jsSonar settings for TFS Build: Sample of configurations for Sonar to work with TFS for copy/pasteSon's Homework and learning to code: Just a collection of coding projects to learn from.SunBurn Terrain Editor: A fully functional standalone WYSWYG terrain (height map and color map) editor. Built upon the SunBurn Platform Framework allowing scope for Linux and Mac ports????.????????: 1) ??????? ???????? ?? 2) C# ?????????? (??????) ??? ???????? ?????? ???? (? ??????? *.dbf) ? ????? ???? 3) WinForms-?????????? ??? ???????????? ?????? ????

  Read the article

• top tweets WebLogic Partner Community – June 2013

  - by JuergenKress

  Send us your tweets @wlscommunity #WebLogicCommunity and follow us on twitter http://twitter.com/wlscommunity. Please feel free to send us your news! Lucas Jellema ?Getting started with Java EE 7: The Tutorial http://docs.oracle.com/javaee/7/tutorial/doc/home.htm … Simon Haslam I'm looking forward to starting a "WLS on ODA" proof of concept - some ideas for testing: http://www.veriton.co.uk/roller/fmw/entry/virtualised_oda_proof_of_concept … Frank Munz ?It's not too late - I just submitted two presentations about #OracleWebLogic and #Coherence for the @DOAGeV conference in Nürnberg. Did you? Arun Gupta ?Tyrus 1.0 User Guide: https://tyrus.java.net/documentation/1.0/user-guide.html … #WebSocket #JavaEE7 #GlassFish Arun Gupta #JavaEE7 Launch Webinar Technical Breakout replays on Youtube: http://bit.ly/12uUicT JSON 1.0 , EJB .2, Batch 1.0 more coming! OracleBlogs ?FREE Virtual Developer Day: Java SE, Java EE, Java Emebedded on Jun 19th and 25th http://ow.ly/2xBkwV Markus Eisele #Oracle #JavaSE Critical Patch Update Pre-Release Announcement - June 2013 http://www.oracle.com/technetwork/topics/security/javacpujun2013-1899847.html … #security OracleSupport_WLS ?Simple Custom #JMX MBeans with #WebLogic 12c and #Spring http://pub.vitrue.com/3kEr Oracle Technet Building Java HTML5/WebSocket Applications with JSR 356 - 4pm - Grand Ballroom Salon A/B #qconnewyork WebLogic Community Oracle Fusion Middleware (OFM) 11g (11.1.1.7) Starter Kit available & Customizable Demos http://wp.me/p1LMIb-BK Oracle Technet #Java EE 7: Moving Java Forward for the Enterprise | @java http://pub.vitrue.com/tHiM OTNArchBeat ?Oracle Forms to ADF Modernization Reference - Convero (AMEC) Project | @AndrejusB http://pub.vitrue.com/lZPR WebLogic Community ?ExaLogic In Memory Applications & Whitepapers Building Large Scale E-Commerce Platforms & Rethink the Entire Application Lifecycle… WebLogic Community ?Coherence YouTube videos http://wp.me/p1LMIb-BG Arun Gupta ?WARNING: Next 2 days are going to be loaded with #JavaEE7 launch related tweets, and offline next week! JDeveloper & ADF Using Contextual Event in Oracle ADF http://dlvr.it/3Vpybr Oracle WebLogic Check out new blog on #hybrid_cloud & why choice is important http://bit.ly/1b1QGhL Andrejus Baranovskis Oracle Forms to ADF Modernization Reference - Convero (AMEC) Project http://fb.me/1M9iWNmAw WebLogic Community WebLogic on Oracle Database Appliance by Frances Zhao http://wp.me/p1LMIb-BE OTNArchBeat ?New: A-Team Chronicles >> A great resource for technical content covering Oracle Fusion Middleware / Fusion Apps http://pub.vitrue.com/qbzS Oracle for Partners ?Take Java To The Edge: Java Virtual Developer Day – June 19 & June 25 http://bit.ly/19fGlSX Adam Bien ?Looking forward to tomorrow's #javaee7 + #angularjs #html5 marriage at #jpoint. See you there: http://www.jpoint.nl/meetingpoint/editie-2013#sessie-1 … shay shmeltzer ?There is a new patch for the #Oracle #ADF Mobile extension - use help->check for updates to get it. Frank Munz ?Not using @OracleWebLogic 12c yet? Australia does! Reviews from my @AUSOUG workshops in Brisbane, Adelaide and Perth. http://goo.gl/BfVc4 Arun Gupta ?WebSocket, Server-Sent Events, #JavaEE7 sessions accepted at #jaxlondon ... that's gonna be at least third trip to London this year! WebLogic Community SPARC T5-8 Delivers Best Single System SPECjEnterprise2010 Benchmark running WebLogic 12c http://wp.me/p1LMIb-BC WebLogic Community The Ultimate Java EE Event - 16 Power Workshops mit allen wichtigen Java-EE-Themen http://wp.me/p1LMIb-BY Oracle WebLogic ?@OracleWebLogic 7 Jun New Blog Post: Using try-with-resources with JDBC objects http://ow.ly/2xryb5 JDeveloper & ADF Switching Lists of Values http://dlvr.it/3PbCkw WebLogic Community ?YouTube channel Learning Oracle's ADF http://wp.me/p1LMIb-zA Markus Eisele [GER] RT @heisedc: #Java-Entwicklung in #Oracles Public #Cloud http://heise.de/-1866388/ftw OracleBlogs ?Coherence Incubator & Community Source Code & Release Documentation http://ow.ly/2x2fXK chriscmuir ?New blog post: Migrating ADF Mobile apps from 1.0 to 1.1 https://blogs.oracle.com/onesizedoesntfitall/entry/migrating_adf_mobile_apps_from … JDeveloper & ADF ?ADF JavaScript Partitioning for Performance http://dlvr.it/3Trw15 WebLogic Community WebLogic Server Security Workshop June 27th 2013 Germany http://wp.me/p1LMIb-C7 WebLogic Community Oracle Optimized Solution for WebLogic Server 12c http://wp.me/p1LMIb-BA WebLogic Community Virtualize and Run Your Forms Applications in the Cloud - Now On Demand http://wp.me/p1LMIb-By Lucas Jellema Innteresting presentation on various aspects of end user assistance in Fusion Applications (ADF based): http://www.slideshare.net/uobroin/ouag-ireland-final2012slideshare … Adam Bien ?Summer Of JavaEE Workshops And Gigs: Free Hacking night:11.06.2013, Utrecht JavaEE 7 Meets HTML 5 and AngularJ... http://bit.ly/11XRjt4 WebLogic Community ?Real World ADF Design & Architecture Principles Trainings Germany, Poland & Portugal http://wp.me/p1LMIb-Bw Oracle for Partners ?JAVA Virtual Developer Day – June 19 & June 25 - Watch educational content and engage with Oracle experts online https://oracle.6connex.com/portal/java2013/login/?langR=en_US&mcc=OPNNSL … Markus Eisele ?[blog] Java EE 7 is final. Thoughts, Insights and further Pointers. http://dlvr.it/3SrxnB #javaee7 WebLogic Community Oracle takes the top spot for market share in the Application Server Market Segment for 2012 http://wp.me/p1LMIb-Bu OTNArchBeat ?Oracle ACE Director @LucasJellema is "very pleasantly surprised" with the new ADF Academy. http://pub.vitrue.com/8fad chriscmuir ?Sell out crowd for our ADF architecture course in Munich #adfarch pic.twitter.com/zhNtQJ25JV Markus Eisele ?[blog] New German Article: Java 7 Update 21 Security Improvements http://dlvr.it/3Sc8V9 #java #heise #security Markus Eisele ?[blog] New German Article: Oracle Java Cloud Service http://dlvr.it/3Sc20V #java #heise #OracleCloud OracleSupport_WLS ?Troubleshooting and Tuning with #WebLogic - Developer Webcast now available on #Youtube http://pub.vitrue.com/GSOy Andrejus Baranovskis New ADF Academy - Impressive Concept for ADF eLearning http://fb.me/2kYSMKKR5 OracleSupport_WLS ?Removing a #weblogic domain properly http://pub.vitrue.com/ZndM WebLogic Community WebLogic Partner Community Newsletter May 2013 http://wp.me/p1LMIb-Bp Oracle WebLogic ?Blog: Troubleshooting tools Part 3- Heap Dumps #Oracle #WebLogic Read the series http://bit.ly/14CQSD2 Oracle WebLogic ?Blog: #WebLogic_Server on #Oracle_Database_Appliance- How to conjure a WebLogic cluster- http://bit.ly/11fciHA Oracle WebLogic ?Check out new cool features in Oracle Traffic Director- http://bit.ly/11fbz9h WebLogic Community Additional new material WebLogic Community April 2013 http://wp.me/p1LMIb-zM WebLogic Community New WebLogic references - we want yours http://wp.me/p1LMIb-zK OracleSupport_WLS ?#Weblogic Session Replication jsession ID and F5 http://pub.vitrue.com/dWZp OracleBlogs ?top tweets WebLogic Partner Community May 2013 http://ow.ly/2xc8M5 WebLogic Community Welcome to the Spring edition of Oracle Scene http://wp.me/p1LMIb-zE Andreas Koop ?[blog post] ADF: Static Values View Object does not show any values (solved) http://bit.ly/14RDZ8p OracleBlogs ?ADF Mobile - accessing the SQLite database http://ow.ly/2x85r0 OracleSupport_WLS Youtube channel- Troubleshooting and Tuning with #WebLogic.#JRockit #SOAP #JRF http://pub.vitrue.com/qMxu Arun Gupta Next Java Magazine is all about #JavaEE7...productivity, HTML5, WebSocket, Batch & more. Subscribe http://ow.ly/lkD5D (@Oraclejavamag) Oracle WebLogic How to configure a #WebLogic cluster on #Oracle_Database_Appliance? It’s easy, read how. http://bit.ly/11fciHA Oracle WebLogic ?Blog: How to use Heap Dumps to troubleshooting memory leaks- #Oracle #WebLogic_Server http://bit.ly/14CQSD2 OracleBlogs ?Over 100 Images To Be Added to NetBeans Platform Showcase http://ow.ly/2x7Fvp Lucas Jellema A new release of the ADF EMG Task Flow Tester is now available for both JDeveloper 11 R1 and R2. https://java.net/projects/adf-task-flow-tester/pages/GettingStarted … WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: twitter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• PASS: Election Changes for 2011

  - by Bill Graziano

  Last year after the election, the PASS Board created an Election Review Committee.  This group was charged with reviewing our election procedures and making suggestions to improve the process.  You can read about the formation of the group and review some of the intermediate work on the site – especially in the forums. I was one of the members of the group along with Joe Webb (Chair), Lori Edwards, Brian Kelley, Wendy Pastrick, Andy Warren and Allen White.  This group worked from October to April on our election process.  Along the way we: Interviewed interested parties including former NomCom members, Board candidates and anyone else that came forward. Held a session at the Summit to allow interested parties to discuss the issues Had numerous conference calls and worked through the various topics I can’t thank these people enough for the work they did.  They invested a tremendous number of hours thinking, talking and writing about our elections.  I’m proud to say I was a member of this group and thoroughly enjoyed working with everyone (even if I did finally get tired of all the calls.) The ERC delivered their recommendations to the PASS Board prior to our May Board meeting.  We reviewed those and made a few modifications.  I took their recommendations and rewrote them as procedures while incorporating those changes.  Their original recommendations as well as our final document are posted at the ERC documents page.  Please take a second and read them BEFORE we start the elections.  If you have any questions please post them in the forums on the ERC site. (My final document includes a change log at the end that I decided to leave in.  If you want to know which areas to pay special attention to that’s a good start.) Many of those recommendations were already posted in the forums or in the blogs of individual ERC members.  Hopefully nothing in the ERC document is too surprising. In this post I’m going to walk through some of the key changes and talk about what I remember from both ERC and Board discussions.  I’ll pay a little extra attention to things the Board changed from the ERC.  I’d also encourage any of the Board or ERC members to blog their thoughts on this. The Nominating Committee will continue to exist.  Personally, I was curious to see what the non-Board ERC members would think about the NomCom.  There was broad agreement that a group to vet candidates had value to the organization. The NomCom will be composed of five members.  Two will be Board members and three will be from the membership at large.  The only requirement for the three community members is that you’ve volunteered in some way (and volunteering is defined very broadly).  We expect potential at-large NomCom members to participate in a forum on the PASS site to answer questions from the other PASS members. We’re going to hold an election to determine the three community members.  It will be closer to voting for Summit sessions than voting for Board members.  That means there won’t be multiple dedicated emails.  If you’re at all paying attention it will be easy to participate.  Personally I wanted it easy for those that cared to participate but not overwhelm those that didn’t care.  I think this strikes a good balance. There’s also a clause that in order to be considered a winner in this NomCom election, you must receive 10 votes.  This is something I suggested.  I have no idea how popular the NomCom election is going to be.  I just wanted a fallback that if no one participated and some random person got in with one or two votes.  Any open slots will be filled by the NomCom chair (usually the PASS Immediate Past President).  My assumption is that they would probably take the next highest vote getters unless they were throwing flames in the forums or clearly unqualified.  As a final check, the Board still approves the final NomCom. The NomCom is going to rank candidates instead of rating them.  This has interesting implications.  This was championed by another ERC member and I’m hoping they write something about it.  This will really force the NomCom to make decisions between candidates.  You can’t just rate everyone a 3 and be done with it.  It may also make candidates appear further apart than they actually are.  I’m looking forward talking with the NomCom after this election and getting their feedback on this. The PASS Board added an option to remove a candidate with a unanimous vote of the NomCom.  This was primarily put in place to handle people that lied on their application or had a criminal background or some other unusual situation and we figured it out. We list an explicit goal of three candidate per open slot. We also wanted an easy way to find the NomCom candidate rankings from the ballot.  Hopefully this will satisfy those that want a broad candidate pool and those that want the NomCom to identify the most qualified candidates. The primary spokesperson for the NomCom is the committee chair.  After the issues around the election last year we didn’t have a good communication plan in place.  We should have and that was a failure on the part of the Board.  If there is criticism of the election this year I hope that falls squarely on the Board.  The community members of the NomCom shouldn’t be fielding complaints over the election process.  That said, the NomCom is ranking candidates and we are forcing them to rank some lower than others.  I’m sure you’ll each find someone that you think should have been ranked differently.  I also want to highlight one other change to the process that we started last year and isn’t included in these documents.  I think the candidate forums on the PASS site were tremendously helpful last year in helping people to find out more about candidates.  That gives our members a way to ask hard questions of the candidates and publicly see their answers. This year we have two important groups to fill.  The first is the NomCom.  We need three people from our membership to step up and fill this role.  It won’t be easy.  You will have to make subjective rankings of your fellow community members.  Your actions will be important in deciding who the future leaders of PASS will be.  There’s a 50/50 chance that one of the people you interview will be the President of PASS someday.  This is not a responsibility to be taken lightly. The second is the slate of candidates.  If you’ve ever thought about running for the Board this is the year.  We’ve never had nine candidates on the ballot before.  Your chance of making it through the NomCom are higher than in any previous year.  Unfortunately the more of you that run, the more of you that will lose in the election.  And hopefully that competition will mean more community involvement and better Board members for PASS. Is this the end of changes to the election process?  It isn’t.  Every year that I’ve been on the Board the election process has changed.  Some years there have been small changes and some years there have been large changes.  After this election we’ll look at how the process worked and decide what steps to take – just like we do every year.

  Read the article

• Disaster, or Migration?

  - by Rob Farley

  This post is in two parts – technical and personal. And I should point out that it’s prompted in part by this month’s T-SQL Tuesday, hosted by Allen Kinsel. First, the technical: I’ve had a few conversations with people recently about migration – moving a SQL Server database from one box to another (sometimes, but not primarily, involving an upgrade). One question that tends to come up is that of downtime. Obviously there will be some period of time between the old server being available and the new one. The way that most people seem to think of migration is this: Build a new server. Stop people from using the old server. Take a backup of the old server Restore it on the new server. Reconfigure the client applications (or alternatively, configure the new server to use the same address as the old) Make the new server online. There are other things involved, such as testing, of course. But this is essentially the process that people tell me they’re planning to follow. The bit that I want to look at today (as you’ve probably guessed from my title) is the “backup and restore” section. If a SQL database is using the Simple Recovery Model, then the only restore option is the last database backup. This backup could be full or differential. The transaction log never gets backed up in the Simple Recovery Model. Instead, it truncates regularly to stay small. One that’s using the Full Recovery Model (or Bulk-Logged) won’t truncate its log – the log must be backed up regularly. This provides the benefit of having a lot more option available for restores. It’s a requirement for most systems of High Availability, because if you’re making sure that a spare box is up-and-running, ready to take over, then you have to be interested in the logs that are happening on the current box, rather than truncating them all the time. A High Availability system such as Mirroring, Replication or Log Shipping will initialise the spare machine by restoring a full database backup (and maybe a differential backup if available), and then any subsequent log backups. Once the secondary copy is close, transactions can be applied to keep the two in sync. The main aspect of any High Availability system is to have a redundant system that is ready to take over. So the similarity for migration should be obvious. If you need to move a database from one box to another, then introducing a High Availability mechanism can help. By turning on the Full Recovery Model and then taking a backup (so that the now-interesting logs have some context), logs start being kept, and are therefore available for getting the new box ready (even if it’s an upgraded version). When the migration is ready to occur, a failover can be done, letting the new server take over the responsibility of the old, just as if a disaster had happened. Except that this is a planned failover, not a disaster at all. There’s a fine line between a disaster and a migration. Failovers can be useful in patching, upgrading, maintenance, and more. Hopefully, even an unexpected disaster can be seen as just another failover, and there can be an opportunity there – perhaps to get some work done on the principal server to increase robustness. And if I’ve just set up a High Availability system for even the simplest of databases, it’s not necessarily a bad thing. :) So now the personal: It’s been an interesting time recently... June has been somewhat odd. A court case with which I was involved got resolved (through mediation). I can’t go into details, but my lawyers tell me that I’m allowed to say how I feel about it. The answer is ‘lousy’. I don’t regret pursuing it as long as I did – but in the end I had to make a decision regarding the commerciality of letting it continue, and I’m going to look forward to the days when the kind of money I spent on my lawyers is small change. Mind you, if I had a similar situation with an employer, I’d do the same again, but that doesn’t really stop me feeling frustrated about it. The following day I had to fly to country Victoria to see my grandmother, who wasn’t expected to last the weekend. She’s still around a week later as I write this, but her 92-year-old body has basically given up on her. She’s been a Christian all her life, and is looking forward to eternity. We’ll all miss her though, and it’s hard to see my family grieving. Then on Tuesday, I was driving back to the airport with my family to come home, when something really bizarre happened. We were travelling down the freeway, just pulled out to go past a truck (farm-truck sized, not a semi-trailer), when a car-sized mass of metal fell off it. It was something like an industrial air-conditioner, but from where I was sitting, it was just a mass of spinning metal, like something out of a movie (one friend described it as “holidays by Michael Bay”). Somehow, and I’m really don’t know how, the part of it nearest us bounced high enough to clear the car, and there wasn’t even a scratch. We pulled over the check, and I was just thanking God that we’d changed lanes when we had, and that we remained unharmed. I had all kinds of thoughts about what could’ve happened if we’d had something that size land on the windscreen... All this has drilled home that while I feel that I haven’t provided as well for the family as I could’ve done (like by pursuing an expensive legal case), I shouldn’t even consider that I have proper control over things. I get to live life, and make decisions based on what I feel is right at the time. But I’m not going to get everything right, and there will be things that feel like disasters, some which could’ve been in my control and some which are very much beyond my control. The case feels like something I could’ve pursued differently, a disaster that could’ve been avoided in some way. Gran dying is lousy of course. An accident on the freeway would have been awful. I need to recognise that the worst disasters are ones that I can’t affect, and that I need to look at things in context – perhaps seeing everything that happens as a migration instead. Life is never the same from one day to the next. Every event has a before and an after – sometimes it’s clearly positive, sometimes it’s not. I remember good events in my life (such as my wedding), and bad (such as the loss of my father when I was ten, or the back injury I had eight years ago). I’m not suggesting that I know how to view everything from the “God works all things for good” perspective, but I am trying to look at last week as a migration of sorts. Those things are behind me now, and the future is in God’s hands. Hopefully I’ve learned things, and will be able to live accordingly. I’ve come through this time now, and even though I’ll miss Gran, I’ll see her again one day, and the future is bright.

  Read the article

• laptop crashed: why?

  - by sds

  my linux (ubuntu 12.04) laptop crashed, and I am trying to figure out why. # last sds pts/4 :0 Tue Sep 4 10:01 still logged in sds pts/3 :0 Tue Sep 4 10:00 still logged in reboot system boot 3.2.0-29-generic Tue Sep 4 09:43 - 11:23 (01:40) sds pts/8 :0 Mon Sep 3 14:23 - crash (19:19) this seems to indicate a crash at 09:42 (= 14:23+19:19). as per another question, I looked at /var/log: auth.log: Sep 4 09:17:02 t520sds CRON[32744]: pam_unix(cron:session): session closed for user root Sep 4 09:43:17 t520sds lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) no messages file syslog: Sep 4 09:24:19 t520sds kernel: [219104.819975] CPU0: Package power limit normal Sep 4 09:43:16 t520sds kernel: imklog 5.8.6, log source = /proc/kmsg started. kern.log: Sep 4 09:24:19 t520sds kernel: [219104.819969] CPU1: Package power limit normal Sep 4 09:24:19 t520sds kernel: [219104.819971] CPU2: Package power limit normal Sep 4 09:24:19 t520sds kernel: [219104.819974] CPU3: Package power limit normal Sep 4 09:24:19 t520sds kernel: [219104.819975] CPU0: Package power limit normal Sep 4 09:43:16 t520sds kernel: imklog 5.8.6, log source = /proc/kmsg started. Sep 4 09:43:16 t520sds kernel: [ 0.000000] Initializing cgroup subsys cpuset Sep 4 09:43:16 t520sds kernel: [ 0.000000] Initializing cgroup subsys cpu I had a computation running until 9:24, but the system crashed 18 minutes later! kern.log has many pages of these: Sep 4 09:43:16 t520sds kernel: [ 0.000000] total RAM covered: 8086M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 10 lose cover RAM: 38M Sep 4 09:43:16 t520sds kernel: [ 0.000000] *BAD*gran_size: 64K chunk_size: 32M num_reg: 10 lose cover RAM: -16M Sep 4 09:43:16 t520sds kernel: [ 0.000000] *BAD*gran_size: 64K chunk_size: 64M num_reg: 10 lose cover RAM: -16M Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 10 lose cover RAM: 0G Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 10 lose cover RAM: 0G Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 10 lose cover RAM: 0G Sep 4 09:43:16 t520sds kernel: [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 10 lose cover RAM: 0G Sep 4 09:43:16 t520sds kernel: [ 0.000000] *BAD*gran_size: 64K chunk_size: 2G num_reg: 10 lose cover RAM: -1G does this mean that my RAM is bad?! it also says Sep 4 09:43:16 t520sds kernel: [ 2.944123] EXT4-fs (sda1): INFO: recovery required on readonly filesystem Sep 4 09:43:16 t520sds kernel: [ 2.944126] EXT4-fs (sda1): write access will be enabled during recovery Sep 4 09:43:16 t520sds kernel: [ 3.088001] firewire_core: created device fw0: GUID f0def1ff8fbd7dff, S400 Sep 4 09:43:16 t520sds kernel: [ 8.929243] EXT4-fs (sda1): orphan cleanup on readonly fs Sep 4 09:43:16 t520sds kernel: [ 8.929249] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 658984 ... Sep 4 09:43:16 t520sds kernel: [ 9.343266] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 525343 Sep 4 09:43:16 t520sds kernel: [ 9.343270] EXT4-fs (sda1): 56 orphan inodes deleted Sep 4 09:43:16 t520sds kernel: [ 9.343271] EXT4-fs (sda1): recovery complete Sep 4 09:43:16 t520sds kernel: [ 9.645799] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) does this mean my HD is bad? As per FaultyHardware, I tried smartctl -l selftest, which uncovered no errors: smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-30-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Momentus 7200.4 Device Model: ST9500420AS Serial Number: 5VJE81YK LU WWN Device Id: 5 000c50 0440defe3 Firmware Version: 0003LVM1 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Sep 10 16:40:04 2012 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 109) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 099 034 Pre-fail Always - 162843537 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 571 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 17210154023 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 174362787320258 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 571 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 1 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 061 043 045 Old_age Always In_the_past 39 (0 11 44 26) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 84 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 20 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2434 194 Temperature_Celsius 0x0022 039 057 000 Old_age Always - 39 (0 15 0 0) 195 Hardware_ECC_Recovered 0x001a 041 041 000 Old_age Always - 162843537 196 Reallocated_Event_Count 0x000f 095 095 030 Pre-fail Always - 4540 (61955, 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 4545 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Googling for the messages proved inconclusive, I can't even figure out whether the messages are routine or catastrophic. So, what do I do now?

  Read the article

• Confirm disk is broken when it passes all diagnostics

  - by Halfgaar

  I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

  Read the article

• Skipping scheduled self-tests and predicting drive EOL

  - by Steve Madsen

  For a few weeks now, smartd has been reporting that it is skipping some of its scheduled self-tests on the weekends: Apr 24 18:29:32 calvin smartd[4758]: Device: /dev/sda, skip scheduled Offline Immediate Test; 40% remaining of current Self-Test. Apr 24 18:29:33 calvin smartd[4758]: Device: /dev/sdb, skip scheduled Offline Immediate Test; 50% remaining of current Self-Test. The drives in this RAID-1 array are set to run an offline test four times a day, a short self-test at 2am every day, and a long self-test on Saturdays at 2am. For some reason, it looks like the long self-test is taking longer, causing the other scheduled tests to be skipped. First question: is this a sign of likely drive failure? Then today, smartd reported that a self-test failed. Here is the output of smartctl -a /dev/sdb: smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823AS Serial Number: 3ND1GNBC Firmware Version: 3.03 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Apr 25 13:15:34 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 047 039 006 Pre-fail Always - 168450357 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 9 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 654745480 9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 40141 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51 194 Temperature_Celsius 0x0022 037 062 000 Old_age Always - 37 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 047 039 000 Old_age Always - 168450357 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40131 - # 2 Extended offline Completed: read failure 30% 40129 379795511 # 3 Short offline Completed without error 00% 40084 - # 4 Short offline Completed without error 00% 40060 - # 5 Short offline Completed without error 00% 40036 - # 6 Short offline Completed without error 00% 40013 - # 7 Short offline Completed without error 00% 39990 - # 8 Extended offline Completed without error 00% 39977 - # 9 Short offline Completed without error 00% 39919 - #10 Short offline Completed without error 00% 39895 - #11 Short offline Completed without error 00% 39872 - #12 Short offline Completed without error 00% 39848 - #13 Short offline Completed without error 00% 39824 - #14 Short offline Completed without error 00% 39801 - #15 Extended offline Completed without error 00% 39789 - #16 Short offline Completed without error 00% 39754 - #17 Short offline Completed without error 00% 39732 - #18 Short offline Completed without error 00% 39707 - #19 Short offline Completed without error 00% 39683 - #20 Short offline Completed without error 00% 39660 - #21 Short offline Completed without error 00% 39636 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Given that this drive is about 4.5 years old, I am probably tempting fate by keeping it in service. SMART doesn't seem to get much respect as a reliable way to predict drive failure. What else can I use to get an early indication of drive failure?

  Read the article

• Where is the mistake ?

  - by mr.bio

  Hi ... i am implementing a simple linked list in c++. I have a mistake and i don't see it :( #include <stdexcept> #include <iostream> struct Node { Node(Node *next, int value): next(next), value(value) { } Node *next; int value; }; class List { Node *first; // Erstes Element , 0 falls die Liste leer ist int len; // Laenge der liste Node *nthNode(int index); // Hilfsfunktion : O( index ) public: // Default - Konstruktor ( Laenge 0): O (1) List():first(0),len(0){ } // Copy - Konstruktor : O(other.len) List(const List & other){ }; // Zuweisungs - Operator O(len +other.len) List &operator=(const List &other) { clear(); if(!other.len) return *this; Node *it = first = new Node(0,other.first->value); for (Node *n = other.first->next; n; n = n->next) { it = it->next = new Node(0, n->value); } len = other.len; return *this; } // Destruktor ( gibt den Speicher von allen Nodes frei ): O( len ) ~List(){ }; // Haengt der Liste ein Element hinten an: O( len ) void push_back(int value){ }; // Fuegt am Anfang der Liste ein Element ein : O (1) void push_front(int value){ Node* front = new Node(0,value); if(first){ first = front; front->next = 0; }else{ front->next = first; first = front; } len++; }; // gibt eine Referenz auf das index -te Element zurueck : O( index ) int &at(int index){ int count = 0 ; int ret ; Node *it = first; for (Node *n = first->next; n; n = n->next) { if(count==index) ret = n->value; count++; } return ret ; }; // Entfernt alle Elemente : O(len) void clear(){ }; // Zeigt alle Elemente an: hier : O( len * len ) void show() { std::cout << " List [" << len << " ]:{ "; for (int i = 0; i < len; ++i) { std::cout << at(i) << (i == len - 1 ? '}' : ','); } std::cout << std::endl; } }; /* * */ int main() { List l; // l. push_back(1); // l. push_back(2); l. push_front(7); l. push_front(8); l. push_front(9); l.show(); // List(l). show(); } it works ... but the output is : List [3 ]:{ 0,134520896,9484585}

  Read the article

• Productivity Tips

  - by Brian T. Jackett

  A few months ago during my first end of year review at Microsoft I was doing an assessment of my year.  One of my personal goals to come out of this reflection was to improve my personal productivity.  While I hear many people say “I wish I had more hours in the day so that I could get more done” I feel like that is the wrong approach.  There is an inherent assumption that you are being productive with your time that you already have and thus more time would allow you to be as productive given more time.    Instead of wishing I could add more hours to the day I’ve begun adopting a number of processes or behavior changes in my personal life to make better use of my time with the goal of improving productivity.  The areas of focus are as follows: Focus Processes Tools Personal health Email Note: A number of these topics have spawned from reading Scott Hanselman’s blog posts on productivity, reading of David Allen’s book Getting Things Done, and discussions with friends and coworkers who had great insights into this topic.   Focus Pre-reading / viewing: Overcome your work addiction Millennials paralyzed by choice Its Not What You Read Its What You Ignore (Scott Hanselman video)    I highly recommend Scott Hanselman’s video above and this post before continuing with this article.  It is well worth the 40+ mins price of admission for the video and couple minutes for article.  One key takeaway for me was listing out my activities in an average week and realizing which ones held little or no value to me.  We all have a finite amount of time to work each day.  Do you know how much time and effort you spend on various aspects of your life (family, friends, religion, work, personal happiness, etc.)?  Do your actions and commitments reflect your priorities?    The biggest time consumers with little value for me were time spent on social media services (Twitter and Facebook), playing an MMO video game, and watching TV.  I still check up on Facebook, Twitter, Microsoft internal chat forums, and other services to keep contact with others but I’ve reduced that time significantly.  As for TV I’ve cut the cord and no longer subscribe to cable TV.  Instead I use Netflix, RedBox, and over the air channels but again with reduced time consumption.  With the time I’ve freed up I’m back to working out 2-3 times a week and reading 4 nights a week (both of which I had been neglecting previously).  I’ll mention a few tools for helping measure your time in the Tools section.   Processes    Do not multi-task.  I’ll say it again.  Do not multi-task.  There is no such thing as multi tasking.  The human brain is optimized to work on one thing at a time.  When you are “multi-tasking” you are really doing 2 or more things at less than 100%, usually by a wide margin.  I take pride in my work and when I’m doing something less than 100% the results typically degrade rapidly.    Now there are some ways of bending the rules of physics for this one.  There is the notion of getting a double amount of work done in the same timeframe.  Some examples would be listening to podcasts / watching a movie while working out, using a treadmill as your work desk, or reading while in the bathroom.    Personally I’ve found good results in combining one task that does not require focus (making dinner, playing certain video games, working out) and one task that does (watching a movie, listening to podcasts).  I believe this is related to me being a visual and kinesthetic (using my hands or actually doing it) learner.  I’m terrible with auditory learning.  My fiance and I joke that sometimes we talk and talk to each other but never really hear each other.   Goals / Tasks    Goals can give us direction in life and a sense of accomplishment when we complete them.  Goals can also overwhelm us and give us a sense of failure when we don’t complete them.  I propose that you shift your perspective and not dwell on all of the things that you haven’t gotten done, but focus instead on regularly setting measureable goals that are within reason of accomplishing.    At the end of each time frame have a retrospective to review your progress.  Do not feel guilty about what you did not accomplish.  Feel proud of what you did accomplish and readjust your goals for the next time frame to more attainable goals.  Here is a sample schedule I’ve seen proposed by some.  I have not consistently set goals for each timeframe, but I do typically set 3 small goals a day (this blog post is #2 for today). Each day set 3 small goals Each week set 3 medium goals Each month set 1 large goal Each year set 2 very large goals   Tools    Tools are an extension of our human body.  They help us extend beyond what we can physically and mentally do.  Below are some tools I use almost daily or have found useful as of late. Disclaimer: I am not getting endorsed to promote any of these products.  I just happen to like them and find them useful. Instapaper – Save internet links for reading later.  There are many tools like this but I’ve found this to be a great one.  There is even a “read it later” JavaScript button you can add to your browser so when you navigate to a site it will then add this to your list. Stacks for Instapaper – A Windows Phone 7 app for reading my Instapaper articles on the go.  It does require a subscription to Instapaper (nominal $3 every three months) but is easily worth the cost.  Alternatively you can set up your Kindle to sync with Instapaper easily but I haven’t done so. SlapDash Podcast – Apps for Windows Phone and  Windows 8 (possibly other platforms) to sync podcast viewing / listening across multiple devices.  Now that I have my Surface RT device (which I love) this is making my consumption easier to manage. Feed Reader – Simple Windows 8 app for quickly catching up on my RSS feeds.  I used to have hundreds of unread items all the time.  Now I’m down to 20-50 regularly and it is much easier and faster to consume on my Surface RT.  There is also a free version (which I use) and I can’t see much different between the free and paid versions currently. Rescue Time – Have you ever wondered how much time you’ve spent on websites vs. email vs. “doing work”?  This service tracks your computer actions and then lets you report on them.  This can help you quantitatively identify areas where your actions are not in line with your priorities. PowerShell – Windows automation tool.  It is now built into every client and server OS.  This tool has saved me days (and I mean the full 24 hrs worth) of time and effort in the past year alone.  If you haven’t started learning PowerShell and you administrating any Windows OS or server product you need to start today. Various blogging tools – I wrote a post a couple years ago called How I Blog about my blogging process and tools used.  Almost all of it still applies today.   Personal Health    Some of these may be common sense or debatable, but I’ve found them to help prioritize my daily activities. Get plenty of sleep on a regular basis.  Sacrificing sleep too many nights a week negatively impacts your cognition, attitude, and overall health. Exercise at least three days.  Exercise could be lifting weights, taking the stairs up multiple flights of stairs, walking for 20 mins, or a number of other "non-traditional” activities.  I find that regular exercise helps with sleep and improves my overall attitude. Eat a well balanced diet.  Too much sugar, caffeine, junk food, etc. are not good for your body.  This is not a matter of losing weight but taking care of your body and helping you perform at your peak potential.   Email    Email can be one of the biggest time consumers (i.e. waster) if you aren’t careful. Time box your email usage.  Set a meeting invite for yourself if necessary to limit how much time you spend checking email. Use rules to prioritize your email.  Email from external customers, my manager, or include me directly on the To line go into my inbox.  Everything else goes a level down and I have 30+ rules to further sort it, mostly distribution lists. Use keyboard shortcuts (when available).  I use Outlook for my primary email and am constantly hitting Alt + S to send, Ctrl + 1 for my inbox, Ctrl + 2 for my calendar, Space / Tab / Shift + Tab to mark items as read, and a number of other useful commands.  Learn them and you’ll see your speed getting through emails increase. Keep emails short.  No one Few people like reading through long emails.  The first line should state exactly why you are sending the email followed by a 3-4 lines to support it.  Anything longer might be better suited as a phone call or in person discussion.   Conclusion    In this post I walked through various tips and tricks I’ve found for improving personal productivity.  It is a mix of re-focusing on the things that matter, using tools to assist in your efforts, and cutting out actions that are not aligned with your priorities.  I originally had a whole section on keyboard shortcuts, but with my recent purchase of the Surface RT I’m finding that touch gestures have replaced numerous keyboard commands that I used to need.  I see a big future in touch enabled devices.  Hopefully some of these tips help you out.  If you have any tools, tips, or ideas you would like to share feel free to add in the comments section.         -Frog Out   Links Scott Hanselman Productivity posts http://www.hanselman.com/blog/CategoryView.aspx?category=Productivity Overcome your work addiction http://blogs.hbr.org/hbsfaculty/2012/05/overcome-your-work-addiction.html?awid=5512355740280659420-3271   Millennials paralyzed by choice http://priyaparker.com/blog/millennials-paralyzed-by-choice   Its Not What You Read Its What You Ignore (video) http://www.hanselman.com/blog/ItsNotWhatYouReadItsWhatYouIgnoreVideoOfScottHanselmansPersonalProductivityTips.aspx   Cutting the cord – Jeff Blankenburg http://www.jeffblankenburg.com/2011/04/06/cutting-the-cord/   Building a sitting standing desk – Eric Harlan http://www.ericharlan.com/Everything_Else/building-a-sitting-standing-desk-a229.html   Instapaper http://www.instapaper.com/u   Stacks for Instapaper http://www.stacksforinstapaper.com/   Slapdash Podcast Windows Phone -  http://www.windowsphone.com/en-us/store/app/slapdash-podcasts/90e8b121-080b-e011-9264-00237de2db9e Windows 8 - http://apps.microsoft.com/webpdp/en-us/app/slapdash-podcasts/0c62e66a-f2e4-4403-af88-3430a821741e/m/ROW   Feed Reader http://apps.microsoft.com/webpdp/en-us/app/feed-reader/d03199c9-8e08-469a-bda1-7963099840cc/m/ROW   Rescue Time http://www.rescuetime.com/   PowerShell Script Center http://technet.microsoft.com/en-us/scriptcenter/bb410849.aspx

  Read the article

• Adding an Admin user to an ASP.NET MVC 4 application using a single drop-in file

  - by Jon Galloway

  I'm working on an ASP.NET MVC 4 tutorial and wanted to set it up so just dropping a file in App_Start would create a user named "Owner" and assign them to the "Administrator" role (more explanation at the end if you're interested). There are reasons why this wouldn't fit into most application scenarios: It's not efficient, as it checks for (and creates, if necessary) the user every time the app starts up The username, password, and role name are hardcoded in the app (although they could be pulled from config) Automatically creating an administrative account in code (without user interaction) could lead to obvious security issues if the user isn't informed However, with some modifications it might be more broadly useful - e.g. creating a test user with limited privileges, ensuring a required account isn't accidentally deleted, or - as in my case - setting up an account for demonstration or tutorial purposes. Challenge #1: Running on startup without requiring the user to install or configure anything I wanted to see if this could be done just by having the user drop a file into the App_Start folder and go. No copying code into Global.asax.cs, no installing addition NuGet packages, etc. That may not be the best approach - perhaps a NuGet package with a dependency on WebActivator would be better - but I wanted to see if this was possible and see if it offered the best experience. Fortunately ASP.NET 4 and later provide a PreApplicationStartMethod attribute which allows you to register a method which will run when the application starts up. You drop this attribute in your application and give it two parameters: a method name and the type that contains it. I created a static class named PreApplicationTasks with a static method named, then dropped this attribute in it: [assembly: PreApplicationStartMethod(typeof(PreApplicationTasks), "Initializer")] That's it. One small gotcha: the namespace can be a problem with assembly attributes. I decided my class didn't need a namespace. Challenge #2: Only one PreApplicationStartMethod per assembly In .NET 4, the PreApplicationStartMethod is marked as AllMultiple=false, so you can only have one PreApplicationStartMethod per assembly. This was fixed in .NET 4.5, as noted by Jon Skeet, so you can have as many PreApplicationStartMethods as you want (allowing you to keep your users waiting for the application to start indefinitely!). The WebActivator NuGet package solves the multiple instance problem if you're in .NET 4 - it registers as a PreApplicationStartMethod, then calls any methods you've indicated using [assembly: WebActivator.PreApplicationStartMethod(type, method)]. David Ebbo blogged about that here:  Light up your NuGets with startup code and WebActivator. In my scenario (bootstrapping a beginner level tutorial) I decided not to worry about this and stick with PreApplicationStartMethod. Challenge #3: PreApplicationStartMethod kicks in before configuration has been read This is by design, as Phil explains. It allows you to make changes that need to happen very early in the pipeline, well before Application_Start. That's fine in some cases, but it caused me problems when trying to add users, since the Membership Provider configuration hadn't yet been read - I got an exception stating that "Default Membership Provider could not be found." The solution here is to run code that requires configuration in a PostApplicationStart method. But how to do that? Challenge #4: Getting PostApplicationStartMethod without requiring WebActivator The WebActivator NuGet package, among other things, provides a PostApplicationStartMethod attribute. That's generally how I'd recommend running code that needs to happen after Application_Start: [assembly: WebActivator.PostApplicationStartMethod(typeof(TestLibrary.MyStartupCode), "CallMeAfterAppStart")] This works well, but I wanted to see if this would be possible without WebActivator. Hmm. Well, wait a minute - WebActivator works in .NET 4, so clearly it's registering and calling PostApplicationStartup tasks somehow. Off to the source code! Sure enough, there's even a handy comment in ActivationManager.cs which shows where PostApplicationStartup tasks are being registered: public static void Run() { if (!_hasInited) { RunPreStartMethods(); // Register our module to handle any Post Start methods. But outside of ASP.NET, just run them now if (HostingEnvironment.IsHosted) { Microsoft.Web.Infrastructure.DynamicModuleHelper.DynamicModuleUtility.RegisterModule(typeof(StartMethodCallingModule)); } else { RunPostStartMethods(); } _hasInited = true; } } Excellent. Hey, that DynamicModuleUtility seems familiar... Sure enough, K. Scott Allen mentioned it on his blog last year. This is really slick - a PreApplicationStartMethod can register a new HttpModule in code. Modules are run right after application startup, so that's a perfect time to do any startup stuff that requires configuration to be read. As K. Scott says, it's this easy: using System; using System.Web; using Microsoft.Web.Infrastructure.DynamicModuleHelper; [assembly:PreApplicationStartMethod(typeof(MyAppStart), "Start")] public class CoolModule : IHttpModule { // implementation not important // imagine something cool here } public static class MyAppStart { public static void Start() { DynamicModuleUtility.RegisterModule(typeof(CoolModule)); } } Challenge #5: Cooperating with SimpleMembership The ASP.NET MVC Internet template includes SimpleMembership. SimpleMembership is a big improvement over traditional ASP.NET Membership. For one thing, rather than forcing a database schema, it can work with your database schema. In the MVC 4 Internet template case, it uses Entity Framework Code First to define the user model. SimpleMembership bootstrap includes a call to InitializeDatabaseConnection, and I want to play nice with that. There's a new [InitializeSimpleMembership] attribute on the AccountController, which calls \Filters\InitializeSimpleMembershipAttribute.cs::OnActionExecuting(). That comment in that method that says "Ensure ASP.NET Simple Membership is initialized only once per app start" which sounds like good advice. I figured the best thing would be to call that directly: new Mvc4SampleApplication.Filters.InitializeSimpleMembershipAttribute().OnActionExecuting(null); I'm not 100% happy with this - in fact, it's my least favorite part of this solution. There are two problems - first, directly calling a method on a filter, while legal, seems odd. Worse, though, the Filter lives in the application's namespace, which means that this code no longer works well as a generic drop-in. The simplest workaround would be to duplicate the relevant SimpleMembership initialization code into my startup code, but I'd rather not. I'm interested in your suggestions here. Challenge #6: Module Init methods are called more than once When debugging, I noticed (and remembered) that the Init method may be called more than once per page request - it's run once per instance in the app pool, and an individual page request can cause multiple resource requests to the server. While SimpleMembership does have internal checks to prevent duplicate user or role entries, I'd rather not cause or handle those exceptions. So here's the standard single-use lock in the Module's init method: void IHttpModule.Init(HttpApplication context) { lock (lockObject) { if (!initialized) { //Do stuff } initialized = true; } } Putting it all together With all of that out of the way, here's the code I came up with: using Mvc4SampleApplication.Filters; using System.Web; using System.Web.Security; using WebMatrix.WebData; [assembly: PreApplicationStartMethod(typeof(PreApplicationTasks), "Initializer")] public static class PreApplicationTasks { public static void Initializer() { Microsoft.Web.Infrastructure.DynamicModuleHelper.DynamicModuleUtility .RegisterModule(typeof(UserInitializationModule)); } } public class UserInitializationModule : IHttpModule { private static bool initialized; private static object lockObject = new object(); private const string _username = "Owner"; private const string _password = "p@ssword123"; private const string _role = "Administrator"; void IHttpModule.Init(HttpApplication context) { lock (lockObject) { if (!initialized) { new InitializeSimpleMembershipAttribute().OnActionExecuting(null); if (!WebSecurity.UserExists(_username)) WebSecurity.CreateUserAndAccount(_username, _password); if (!Roles.RoleExists(_role)) Roles.CreateRole(_role); if (!Roles.IsUserInRole(_username, _role)) Roles.AddUserToRole(_username, _role); } initialized = true; } } void IHttpModule.Dispose() { } } The Verdict: Is this a good thing? Maybe. I think you'll agree that the journey was undoubtedly worthwhile, as it took us through some of the finer points of hooking into application startup, integrating with membership, and understanding why the WebActivator NuGet package is so useful Will I use this in the tutorial? I'm leaning towards no - I think a NuGet package with a dependency on WebActivator might work better: It's a little more clear what's going on Installing a NuGet package might be a little less error prone than copying a file A novice user could uninstall the package when complete It's a good introduction to NuGet, which is a good thing for beginners to see This code either requires either duplicating a little code from that filter or modifying the file to use the namespace Honestly I'm undecided at this point, but I'm glad that I can weigh the options. If you're interested: Why are you doing this? I'm updating the MVC Music Store tutorial to ASP.NET MVC 4, taking advantage of a lot of new ASP.NET MVC 4 features and trying to simplify areas that are giving people trouble. One change that addresses both needs us using the new OAuth support for membership as much as possible - it's a great new feature from an application perspective, and we get a fair amount of beginners struggling with setting up membership on a variety of database and development setups, which is a distraction from the focus of the tutorial - learning ASP.NET MVC. Side note: Thanks to some great help from Rick Anderson, we had a draft of the tutorial that was looking pretty good earlier this summer, but there were enough changes in ASP.NET MVC 4 all the way up to RTM that there's still some work to be done. It's high priority and should be out very soon. The one issue I ran into with OAuth is that we still need an Administrative user who can edit the store's inventory. I thought about a number of solutions for that - making the first user to register the admin, or the first user to use the username "Administrator" is assigned to the Administrator role - but they both ended up requiring extra code; also, I worried that people would use that code without understanding it or thinking about whether it was a good fit.

  Read the article

• SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

  - by digby280

  I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Continuous Integration for SQL Server Part II – Integration Testing

  - by Ben Rees

  My previous post, on setting up Continuous Integration for SQL Server databases using GitHub, Bamboo and Red Gate’s tools, covered the first two parts of a simple Database Continuous Delivery process: Putting your database in to a source control system, and, Running a continuous integration process, each time changes are checked in. However there is, of course, a lot more to to Continuous Delivery than that. Specifically, in addition to the above: Putting some actual integration tests in to the CI process (otherwise, they don’t really do much, do they!?), Deploying the database changes with a managed, automated approach, Monitoring what you’ve just put live, to make sure you haven’t broken anything. This post will detail how to set up a very simple pipeline for implementing the first of these (continuous integration testing). NB: A lot of the setup in this post is built on top of the configuration from before, so it might be difficult to implement this post without running through part I first. There’ll then be a third post on automated database deployment followed by a final post dealing with the last item – monitoring changes on the live system. In the previous post, I used a mixture of Red Gate products and other 3rd party software – GitHub and Atlassian Bamboo specifically. This was partly because I believe most people work in an heterogeneous environment, using software from different vendors to suit their purposes and I wanted to show how this could work for this process. For example, you could easily substitute Atlassian’s BitBucket or Stash for GitHub, depending on your needs, or use an alternative CI server such as TeamCity, TFS or Jenkins. However, in this, post, I’ll be mostly using Red Gate products only (other than tSQLt). I would do this, firstly because I work for Red Gate. However, I also think that in the area of Database Delivery processes, nobody else has the offerings to implement this process fully – so I didn’t have any choice!   Background on Continuous Delivery For me, a great source of information on what makes a proper Continuous Delivery process is the Jez Humble and David Farley classic: Continuous Delivery – Reliable Software Releases through Build, Test, and Deployment Automation This book is not of course, primarily about databases, and the process I outline here and in the previous article is a gross simplification of what Jez and David describe (not least because it’s that much harder for databases!). However, a lot of the principles that they describe can be equally applied to database development and, I would argue, should be. As I say however, what I describe here is a very simple version of what would be required for a full production process. A couple of useful resources on handling some of these complexities can be found in the following two references: Refactoring Databases – Evolutionary Database Design, by Scott J Ambler and Pramod J. Sadalage Versioning Databases – Branching and Merging, by Scott Allen In particular, I don’t deal at all with the issues of multiple branches and merging of those branches, an issue made particularly acute by the use of GitHub. The other point worth making is that, in the words of Martin Fowler: Continuous Delivery is about keeping your application in a state where it is always able to deploy into production.   I.e. we are not talking about continuously delivery updates to the production database every time someone checks in an amendment to a stored procedure. That is possible (and what Martin calls Continuous Deployment). However, again, that’s more than I describe in this article. And I doubt I need to remind DBAs or Developers to Proceed with Caution!   Integration Testing Back to something practical. The next stage, building on our set up from the previous article, is to add in some integration tests to the process. As I say, the CI process, though interesting, isn’t enormously useful without some sort of test process running. For this we’ll use the tSQLt framework, an open source framework designed specifically for running SQL Server tests. tSQLt is part of Red Gate’s SQL Test found on http://www.red-gate.com/products/sql-development/sql-test/ or can be downloaded separately from www.tsqlt.org - though I’ll provide a step-by-step guide below for setting this up. Getting tSQLt set up via SQL Test Click on the link http://www.red-gate.com/products/sql-development/sql-test/ and click on the blue Download button to download the Red Gate SQL Test product, if not already installed. Follow the install process for SQL Test to install the SQL Server Management Studio (SSMS) plugin on to your machine, if not already installed. Open SSMS. You should now see SQL Test under the Tools menu:   Clicking this link will give you the basic SQL Test dialogue: As yet, though we’ve installed the SQL Test product we haven’t yet installed the tSQLt test framework on to any particular database. To do this, we need to add our RedGateApp database using this dialogue, by clicking on the + Add Database to SQL Test… link, selecting the RedGateApp database and clicking the Add Database link:   In the next screen, SQL Test describes what will be installed on the database for the tSQLt framework. Also in this dialogue, uncheck the “Add SQL Cop tests” option (shown below). SQL Cop is a great set of pre-defined tests that work within the tSQLt framework to check the general health of your SQL Server database. However, we won’t be using them in this particular simple example: Once you’ve clicked on the OK button, the changes described in the dialogue will be made to your database. Some of these are shown in the left-hand-side below: We’ve now installed the framework. However, we haven’t actually created any tests, so this will be the next step. But, before we proceed, we’ve made an update to our database so should, again check this in to source control, adding comments as required:   Also worth a quick check that your build still runs with the new additions!: (And a quick check of the RedGateAppCI database shows that the changes have been made).   Creating and Testing a Unit Test There are, of course, a lot of very interesting unit tests that you could and should set up for a database. The great thing about the tSQLt framework is that you can write these in SQL. The example I’m going to use here is pretty Mickey Mouse – our database table is going to include some email addresses as reference data and I want to check whether these are all in a correct email format. Nothing clever but it illustrates the process and hopefully shows the method by which more interesting tests could be set up. Adding Reference Data to our Database To start, I want to add some reference data to my database, and have this source controlled (as well as the schema). First of all I need to add some data in to my solitary table – this can be done a number of ways, but I’ll do this in SSMS for simplicity: I then add some reference data to my table: Currently this reference data just exists in the database. For proper integration testing, this needs to form part of the source-controlled version of the database – and so needs to be added to the Git repository. This can be done via SQL Source Control, though first a Primary Key needs to be added to the table. Right click the table, select Design, then right-click on the first “id” row. Then click on “Set Primary Key”: NB: once this change is made, click Save to save the change to the table. Then, to source control this reference data, right click on the table (dbo.Email) and selecting the following option:   In the next screen, link the data in the Email table, by selecting it from the list and clicking “save and close”: We should at this point re-commit the changes (both the addition of the Primary Key, and the data) to the Git repo. NB: From here on, I won’t show screenshots for the GitHub side of things – it’s the same each time: whenever a change is made in SQL Source Control and committed to your local folder, you then need to sync this in the GitHub Windows client (as this is where the build server, Bamboo is taking it from). An interesting point to note here, when these changes are committed in SQL Source Control (right-click database and select “Commit Changes to Source Control..”): The display gives a warning about possibly needing a migration script for the “Add Primary Key” step of the changes. This isn’t actually necessary in this case, but this mechanism would allow you to create override scripts to replace the default change scripts created by the SQL Compare engine (which runs underneath SQL Source Control). Ignoring this message (!), we add a comment and commit the changes to Git. I then sync these, run a build (or the build gets run automatically), and check that the data is being deployed over to the target RedGateAppCI database:   Creating and Running the Test As I mention, the test I’m going to use here is a very simple one - are the email addresses in my reference table valid? This isn’t of course, a full test of email validation (I expect the email addresses I’ve chosen here aren’t really the those of the Fab Four) – but just a very basic check of format used. I’ve taken the relevant SQL from this Stack Overflow article. In SSMS select “SQL Test” from the Tools menu, then click on + New Test: In the next screen, give your new test a name, and also enter a name in the Test Class box (test classes are schemas that help you keep things organised). Also check that the database in which the test is going to be created is correct – RedGateApp in this example: Click “Create Test”. After closing a couple of subsequent dialogues, you’ll see a dummy script for the test, that needs filling in:   We now need to define the SQL for our test. As mentioned before, tSQLt allows you to write your unit tests in T-SQL, and the code I’m going to use here is as below. This needs to be copied and pasted in to the query window, to replace the default given by tSQLt: –  Basic email check test ALTER PROCEDURE [MyChecks].[test Check Email Addresses] AS BEGIN SET NOCOUNT ON         Declare @Output VarChar(max)     Set @Output = ”       SELECT  @Output = @Output + Email +Char(13) + Char(10) FROM dbo.Email WHERE email NOT LIKE ‘%_@__%.__%’       If @Output > ”         Begin             Set @Output = Char(13) + Char(10)                           + @Output             EXEC tSQLt.Fail@Output         End   END;   Once this script is entered, hit execute to add the Stored Procedure to the database. Before committing the test to source control,  it’s worth just checking that it works! For a positive test, click on “SQL Test” from the Tools menu, then click Run Tests. You should see output like the following: - a green tick to indicate success! But of course, what we also need to do is test that this is actually doing something by showing a failed test. Edit one of the email addresses in your table to an incorrect format: Now, re-run the same SQL Test as before and you’ll see the following: Great – we now know that our test is really doing something! You’ll also see a useful error message at the bottom of SSMS: (leave the email address as invalid for now, for the next steps). The next stage is to check this new test in to source control again, by right-clicking on the database and checking in the changes with a commit message (and not forgetting to sync in the GitHub client):   Checking that the Tests are Running as Integration Tests After the changes above are made, and after a build has run on Bamboo (manual or automatic), looking at the Stored Procedures for the RedGateAppCI, the SPROC for the new test has been moved over to the database. However this is not exactly what we were after. We didn’t want to just copy objects from one database to another, but actually run the tests as part of the build/integration test process. I.e. we’re continuously checking any changes we make (in this case, to the reference data emails), to ensure we’re not breaking a test that we’ve set up. The behaviour we want to see is that, if we check in static data that is incorrect (as we did in step 9 above) and we have the tSQLt test set up, then our build in Bamboo should fail. However, re-running the build shows the following: - sadly, a successful build! To make sure the tSQLt tests are run as part of the integration test, we need to amend a switch in the Red Gate CI config file. First, navigate to file sqlCI.targets in your working folder: Edit this document, make the following change, save the document, then commit and sync this change in the GitHub client: <!-- tSQLt tests --> <!-- Optional --> <!-- To run tSQLt tests in source control for the database, enter true. --> <enableTsqlt>true</enableTsqlt> Now, if we re-run the build in Bamboo (NB: I’ve moved to a new server here, hence different address and build number): - superb, a broken build!! The error message isn’t great here, so to get more detailed info, click on the full build log link on this page (below the fold). The interesting part of the log shown is towards the bottom. Pulling out this part:   21-Jun-2013 11:35:19 Build FAILED. 21-Jun-2013 11:35:19 21-Jun-2013 11:35:19 "C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj" (default target) (1) -> 21-Jun-2013 11:35:19 (sqlCI target) -> 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: RedGate.Deploy.SqlServerDbPackage.Shared.Exceptions.InvalidSqlException: Test Case Summary: 1 test case(s) executed, 0 succeeded, 1 failed, 0 errored. [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: [MyChecks].[test Check Email Addresses] failed: [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: ringo.starr@beatles [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: +----------------------+ [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: |Test Execution Summary| [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj]   As a final check, we should make sure that, if we now fix this error, the build succeeds. So in SSMS, I’m going to correct the invalid email address, then check this change in to SQL Source Control (with a comment), commit to GitHub, and re-run the build:   This should have fixed the build: It worked! Summary This has been a very quick run through the implementation of CI for databases, including tSQLt tests to test whether your database updates are working. The next post in this series will focus on automated deployment – we’ve tested our database changes, how can we now deploy these to target sites?  

  Read the article

• CodePlex Daily Summary for Saturday, August 09, 2014

  CodePlex Daily Summary for Saturday, August 09, 2014Popular ReleasesSEToolbox: SEToolbox 01.042.019 Release 1: Added RadioAntenna broadcast name to ship name detail. Added two additional columns for Asteroid material generation for Asteroid Fields. Added Mass and Block number columns to main display. Added Ellipsis to some columns on main display to reduce name confusion. Added correct SE version number in file when saving. Re-added in reattaching Motor when drag/dropping or importing ships (KeenSH have added RotorEntityId back in after removing it months ago). Added option to export and r...QuickDAL: Initial Public Build: We recommend simply forking the source into your project. But you can use this DLL and PDB (debug symbols) if you'd rather not add clutter to your solution.N-Tier Entity Framework: N-Tier Entity Framework - 1.5 Beta 2: This is a pre-release version. Contents: N-Tier Entity Framework (VS2010).1.5.0-beta002.vsix N-Tier Entity Framework (VS2012).1.5.0-beta002.vsix N-Tier Entity Framework (VS2013).1.5.0-beta002.vsixThe Freemwork - An open game framework in C# .NET: v0.2 - Vortigaunt: Added space partitionning support Added depth support on CompositeSpriteHolder Added multiple components Added camera strategies Added extensions and math methods Added another constructor to Identity2D Updated Tools.TuplesFromT64 to support multiple layers of tiles Updated Identity2D.GlobalTransform property : now returns the screen position, regardless of Identity2D.DependsOnCamera Fixed Rectangle.Transform method Fixed sprite depth support Fixed wrong mathematic functions Multiple bugfixesLanMngmtXL: LanMngmtXL-1.0.61: This release includes binary files for 64 bit OS, source code and manual. Changes- host arp tables loaded - if more than 1 million rows then data saved to several excel tabs Quick How-To (using binary file)Follow these steps to use the software. Check included documentation for more details: Unpack ZIP file Download aditional tools for retrieving configurations like Plink (save to C:\Putty\plink.exe) or WVT (read documentation) Create a device list to get configurations (ex. devices.txt...Remote Linq: Demo - RemoteQueryableToEntityFramework: Demo application to show dynamic queries (joins, aggregations, groupings, projections, etc.) over WCF using EF on server sideTransMock: TransMock 0.9.1 (Beta): Minor fixes of the assembly name with the BizUnit steps Updated the name of the isntaller to indicate that it is for BizTalk server 2010. Tested and working with BizTalk 2013 as well, though assemblies are compiled for .NET 4.0.SharePoint 2013 Lync Presence using jQuery: jQuery Lync Presence: I have fixed the same user multiple times on page issue in this release (Issue # 1506)Dynamics AX IEIDE Project Explorer: IEIDE.1.1.40803.1: Installing the project: 1. Install the ax model file; do this by running the following commands on the machine having the AX Management Tools: 1.a. cmd (depending if you have UAC enabled, you may want to Run as administrator); 1.b. net stop aos60$01 (wait until you have your AOS stopped); 1.c. cd "c:\Program Files\Microsoft Dynamics AX\60\ManagementUtili ties\" 1.d. axutil import /file:c:\IEIDE.1.1.40806.1.axmodel /verbose 1.e. net start aos60$01 1.f. start the client and select Skip 2. Per...Facebook Graph Toolkit: Facebook Graph Toolkit 5.1: Updated to 100 Graph Api endpoint mappings with 258 object propertiesJSLint.NET: JSLint.NET 1.6.4: Bugs: #38: MSBuild task support for linked settings file. #40: Explicitly typed imports / exports required in some Visual Studio environments.Instant Beautiful Browsing: IBB 14.3 Alpha: An alpha release of IBB. After 3 years of the last release this version is made from scratch, with tons of new features like: Make your own IBB aps. HTML 5. Better UI. Extreme Windows 8 resemblance. Photos. Store. Movement TONS of times smother compared to previous versions. Remember that this is AN ALPHA release, I hope I will have "IBB 14" finished by December. The documentation on how to create a new application for IBB will come next monthjQuery List DragSort: jQuery List DragSort 0.5.2: Fixed scrollContainer removing deprecated use of $.browser so should now work with latest version of jQuery. Added the ability to return false in dragEnd to revert sort order Project changes Added nuget package for dragsort https://www.nuget.org/packages/dragsort Converted repository from SVN to MercurialLexisnexis directory of corporate affiliates Text Analyzer: Lexisnexis Text Analyzer: This version has functions below.Standards to analyze, columns, keywords editing Import of document Export to CSV and Microsoft Excel fileWix# (WixSharp) - managed interface for WiX: Release 1.0.0.0: Release 1.0.0.0 Custom UI Custom MSI Dialog Custom CLR Dialog External UIRecaptcha for .NET: Recaptcha for .NET v1.6.0: What's New?Bug fixes Optimized codeMath.NET Numerics: Math.NET Numerics v3.2.0: Linear Algebra: Vector.Map2 (map2 in F#), storage-optimized Linear Algebra: fix RemoveColumn/Row early index bound check (was not strict enough) Statistics: Entropy ~Jeff Mastry Interpolation: use Array.BinarySearch instead of local implementation ~Candy Chiu Resources: fix a corrupted exception message string Portable Build: support .Net 4.0 as well by using profile 328 instead of 344. .Net 3.5: F# extensions now support .Net 3.5 as well .Net 3.5: NuGet package now contains pro...Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.11: Virto Commerce Community Edition version 1.11. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes many bug fixes and minor improvements. More details about this release can be found on our blog at http://blog.virtocommerce.com.Json.NET: Json.NET 6.0 Release 4: New feature - Added Merge to LINQ to JSON New feature - Added JValue.CreateNull and JValue.CreateUndefined New feature - Added Windows Phone 8.1 support to .NET 4.0 portable assembly New feature - Added OverrideCreator to JsonObjectContract New feature - Added support for overriding the creation of interfaces and abstract types New feature - Added support for reading UUID BSON binary values as a Guid New feature - Added MetadataPropertyHandling.Ignore New feature - Improv...VidCoder: 1.5.24 Beta: Added NL-Means denoiser. Updated HandBrake core to SVN 6254. Added extra error handling to DVD player code to avoid a crash when the player was moved.New Projects2113110030: ten: pham van long mon: oop 2113110282: Mon: OPP Ten: Tran Thanh Danh2113110294: Mon: OOP Ten: Vo Ngoc Thai Lop:CCQ1311LAarena: TESTSTSTBowling Game: Program that makes you the follow-up to a game of bowling scoresCTP API for .NET: Comprehensive Trading Platform Application Programming Interface for the .NET Framework CTP API Version: V6.3.0Dashboard Chart Exporter for Microsoft Dynamics CRM 2013: Tool to export Dashboard Charts as Image files in Microsoft Dynamics CRM 2013MergeHosts: A python script to merge hosts file together for those enjoying a clean browsing experienceMFCBDAINF: BDA DTV topology information applicationNetFlux Tunneler Client: This client is a simple Tunneler that creates a TCP connection to the server and sends a custom designed header (originally to bypass firewalls) to the server.NetFlux Tunneler Server: This server is a simple Tunneler that accepts a TCP connection from the client and forwards it to another address, intercepting the custom header. oDesk .NET Library: oDesk .NET Portable Library developed by Andrew SorochakOooPlayer: Lightweight music player that supports mp3, aac, ogg, opus, flac, alac, ape, mpc, tta, wv, wma, ac3OOP-2113110292: class :OOP Name : Nguyen Minh TanOOP-2113110299: Mon: OOP Ten: Nguyen Minh Xuan Lop: CCQ1311LA Truong: Cao dang Cong Thuong - Tp. Ho Chi MinhSFML Tower Defence: SFML Tower defence game that was meant to demonstrate the principals taught in the NWU Potchefstroom EERI 314 course. The game is created using SFML and C++.The Happy Birthday Dad Project: A happy birthday message for my dad???????: ???????QQ:2281595668，?????，????，????　　????????????????，?????????????????????，?????????????????????????!???????????????????????????????????????????????、??????????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ???????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，?????????????????: ?????????????: ????????????: ????????????: ???????????: ???????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ??????QQ：2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,???????: ???????QQ：2281595668，?????，????，????。????????????????，?????????????????????，?????????????????????????!???????????????????????????????????????????????、?????????、??????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ??????????: ??????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ?????????????: ????????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ???????QQ：2281595668，?????，????，????。????????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，???????: ????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ??????QQ：2281595668，?????，????，????。???????????????，??????????????????????????，????????????!??????????????????????????????????????????、???????、????、??????、??????????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ：2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。????????，??????????????????????。????????，????????????，?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ???????????: 5454??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ???????????: ????? QQ:2281595668，?????，????，????。????? ??????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ??????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ????? QQ:2281595668，?????，????，????。????? ?????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，???????????????: ???????????: ?????QQ:2281595668，?????，????，????　　???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，?????????????????: jhfiwegb?????: ???????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，??????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，??????????????????????????????: ???????????: ???????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ???????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,????????????????????: ?????????????: ????????????: ??????QQ：2281595668，?????，????，????。??????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???? ?????，?????????????: ???????????: ???????????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ????????????: ????????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ??????????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ??????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ??????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ???????????: ?????????????: ??????????????: ??????QQ：2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，???????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????　　??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，???????????????????????????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ????? QQ:2281595668，?????，????，????。????? ????????????，????????。????????????????、???????。??????????????。????? ???????????,??????,??????,??????,??????????????，????????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ????????????????: ?????????????????: ?????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ???????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ????? QQ：2281595668，?????，????，????。?????????? ???????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ???????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ???????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，???????: ?????????????: ???????????: ??????????: ??????????: ????????????: ??????????????: ????????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ????????????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????　　??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ????????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ：2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ???????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ????????????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: xtbjza??????: ??????QQ：2281595668，?????，????，????。???????????????，??????????????????????????，????????????!??????????????????????????????????????????、???????、????、??????、????????????: ???????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,????????: ?????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ????? QQ:2281595668，?????，????，????。????? ??????????????，??????????????，????，?????????????????????，??????。????? ??，??????????????????????。????????，????????????，??????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ????????????: ??????QQ：2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，?????????: ????????????: ?????QQ:2281595668??????: ???????????: ????? QQ：2281595668，?????，????，????。????? ????????????，????????。????????????????、???????。??????????????。????? ???????????,??????,??????,??????,??????????????，????????: ????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????????: ??????????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????，?????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ??????????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????: ????????????: ??????????????: ????????QQ:2281595668，?????，????，????　　??????????????????????，??1998?7??????，??????????，?????????，?????????????，?????????????????????????. ????????????????????，??????: ??????QQ：2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ?????????????: ?????????????: ???????????: ????? QQ：2281595668，?????，????，????。????? ???????????????????，????????????，????? ?98???????????，????，??????????，?????????. 　　?????????,????????????????，??????????????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ????????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: 　?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，???????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”??????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，??????: ?????????????: ????????????????: ????????????????: ?????????????: ????????????: ???????QQ:2281595668，?????，????，????　　???????????????????，????????????，????????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ?????????????: ???????QQ:2281595668，?????，????，????　　???????????????????，????????????，????????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ????????????： 　　?????：??????、??、??、????、????(??、??、????)???、???????、?????、?????????????????(???、??、???、??、???); 　　?????：???、?????、???、?????(??、??、??、???)、?????(??????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ???????????: ????????????: ????????????: ?????????????: ???????QQ:2281595668，?????，????，????　　????????????????????????????,????????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;?????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ?????????????: ?????????????: ?????????????: ???????QQ：2281595668，?????，????，????。　　????????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ?????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????，?????: ???????????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、?????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，???????: ???????QQ：2281595668，?????，????，????。???????????，??????????????????。?????? ?????，????????????????，????????????。????，?????????????，????，??“??????”???? ?????，?????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、????????????????: ???????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，?????????????，????，??“??????”???????: ???????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ????????????: ?????????????: ??????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、????????: ?????????????: ????????????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ????????????: ???????QQ：2281595668，?????，????，????。???????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，??????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ??????QQ：2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，???????: ????? QQ：2281595668，?????，????，????。????? ????????????，????????。????????????????、???????。??????????????。????? ???????????,??????,??????,??????,??????????????，???????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ??????QQ：2281595668，?????，????，????。????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ???????????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ???????????: ?????????????: ???????

  Read the article

• Generating EF Code First model classes from an existing database

  - by Jon Galloway

  Entity Framework Code First is a lightweight way to "turn on" data access for a simple CLR class. As the name implies, the intended use is that you're writing the code first and thinking about the database later. However, I really like the Entity Framework Code First works, and I want to use it in existing projects and projects with pre-existing databases. For example, MVC Music Store comes with a SQL Express database that's pre-loaded with a catalog of music (including genres, artists, and songs), and while it may eventually make sense to load that seed data from a different source, for the MVC 3 release we wanted to keep using the existing database. While I'm not getting the full benefit of Code First - writing code which drives the database schema - I can still benefit from the simplicity of the lightweight code approach. Scott Guthrie blogged about how to use entity framework with an existing database, looking at how you can override the Entity Framework Code First conventions so that it can work with a database which was created following other conventions. That gives you the information you need to create the model classes manually. However, it turns out that with Entity Framework 4 CTP 5, there's a way to generate the model classes from the database schema. Once the grunt work is done, of course, you can go in and modify the model classes as you'd like, but you can save the time and frustration of figuring out things like mapping SQL database types to .NET types. Note that this template requires Entity Framework 4 CTP 5 or later. You can install EF 4 CTP 5 here. Step One: Generate an EF Model from your existing database The code generation system in Entity Framework works from a model. You can add a model to your existing project and delete it when you're done, but I think it's simpler to just spin up a separate project to generate the model classes. When you're done, you can delete the project without affecting your application, or you may choose to keep it around in case you have other database schema updates which require model changes. I chose to add the Model classes to the Models folder of a new MVC 3 application. Right-click the folder and select "Add / New Item..."   Next, select ADO.NET Entity Data Model from the Data Templates list, and name it whatever you want (the name is unimportant).   Next, select "Generate from database." This is important - it's what kicks off the next few steps, which read your database's schema.   Now it's time to point the Entity Data Model Wizard at your existing database. I'll assume you know how to find your database - if not, I covered that a bit in the MVC Music Store tutorial section on Models and Data. Select your database, uncheck the "Save entity connection settings in Web.config" (since we won't be using them within the application), and click Next.   Now you can select the database objects you'd like modeled. I just selected all tables and clicked Finish.   And there's your model. If you want, you can make additional changes here before going on to generate the code.   Step Two: Add the DbContext Generator Like most code generation systems in Visual Studio lately, Entity Framework uses T4 templates which allow for some control over how the code is generated. K Scott Allen wrote a detailed article on T4 Templates and the Entity Framework on MSDN recently, if you'd like to know more. Fortunately for us, there's already a template that does just what we need without any customization. Right-click a blank space in the Entity Framework model surface and select "Add Code Generation Item..." Select the Code groupt in the Installed Templates section and pick the ADO.NET DbContext Generator. If you don't see this listed, make sure you've got EF 4 CTP 5 installed and that you're looking at the Code templates group. Note that the DbContext Generator template is similar to the EF POCO template which came out last year, but with "fix up" code (unnecessary in EF Code First) removed.   As soon as you do this, you'll two terrifying Security Warnings - unless you click the "Do not show this message again" checkbox the first time. It will also be displayed (twice) every time you rebuild the project, so I checked the box and no immediate harm befell my computer (fingers crossed!).   Here's the payoff: two templates (filenames ending with .tt) have been added to the project, and they've generated the code I needed.   The "MusicStoreEntities.Context.tt" template built a DbContext class which holds the entity collections, and the "MusicStoreEntities.tt" template build a separate class for each table I selected earlier. We'll customize them in the next step. I recommend copying all the generated .cs files into your application at this point, since accidentally rebuilding the generation project will overwrite your changes if you leave them there. Step Three: Modify and use your POCO entity classes Note: I made a bunch of tweaks to my POCO classes after they were generated. You don't have to do any of this, but I think it's important that you can - they're your classes, and EF Code First respects that. Modify them as you need for your application, or don't. The Context class derives from DbContext, which is what turns on the EF Code First features. It holds a DbSet for each entity. Think of DbSet as a simple List, but with Entity Framework features turned on.   //------------------------------------------------------------------------------ // <auto-generated> // This code was generated from a template. // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // </auto-generated> //------------------------------------------------------------------------------ namespace EF_CodeFirst_From_Existing_Database.Models { using System; using System.Data.Entity; public partial class Entities : DbContext { public Entities() : base("name=Entities") { } public DbSet<Album> Albums { get; set; } public DbSet<Artist> Artists { get; set; } public DbSet<Cart> Carts { get; set; } public DbSet<Genre> Genres { get; set; } public DbSet<OrderDetail> OrderDetails { get; set; } public DbSet<Order> Orders { get; set; } } } It's a pretty lightweight class as generated, so I just took out the comments, set the namespace, removed the constructor, and formatted it a bit. Done. If I wanted, though, I could have added or removed DbSets, overridden conventions, etc. using System.Data.Entity; namespace MvcMusicStore.Models { public class MusicStoreEntities : DbContext { public DbSet Albums { get; set; } public DbSet Genres { get; set; } public DbSet Artists { get; set; } public DbSet Carts { get; set; } public DbSet Orders { get; set; } public DbSet OrderDetails { get; set; } } } Next, it's time to look at the individual classes. Some of mine were pretty simple - for the Cart class, I just need to remove the header and clean up the namespace. //------------------------------------------------------------------------------ // // This code was generated from a template. // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // //------------------------------------------------------------------------------ namespace EF_CodeFirst_From_Existing_Database.Models { using System; using System.Collections.Generic; public partial class Cart { // Primitive properties public int RecordId { get; set; } public string CartId { get; set; } public int AlbumId { get; set; } public int Count { get; set; } public System.DateTime DateCreated { get; set; } // Navigation properties public virtual Album Album { get; set; } } } I did a bit more customization on the Album class. Here's what was generated: //------------------------------------------------------------------------------ // // This code was generated from a template. // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // //------------------------------------------------------------------------------ namespace EF_CodeFirst_From_Existing_Database.Models { using System; using System.Collections.Generic; public partial class Album { public Album() { this.Carts = new HashSet(); this.OrderDetails = new HashSet(); } // Primitive properties public int AlbumId { get; set; } public int GenreId { get; set; } public int ArtistId { get; set; } public string Title { get; set; } public decimal Price { get; set; } public string AlbumArtUrl { get; set; } // Navigation properties public virtual Artist Artist { get; set; } public virtual Genre Genre { get; set; } public virtual ICollection Carts { get; set; } public virtual ICollection OrderDetails { get; set; } } } I removed the header, changed the namespace, and removed some of the navigation properties. One nice thing about EF Code First is that you don't have to have a property for each database column or foreign key. In the Music Store sample, for instance, we build the app up using code first and start with just a few columns, adding in fields and navigation properties as the application needs them. EF Code First handles the columsn we've told it about and doesn't complain about the others. Here's the basic class: using System.ComponentModel; using System.ComponentModel.DataAnnotations; using System.Web.Mvc; using System.Collections.Generic; namespace MvcMusicStore.Models { public class Album { public int AlbumId { get; set; } public int GenreId { get; set; } public int ArtistId { get; set; } public string Title { get; set; } public decimal Price { get; set; } public string AlbumArtUrl { get; set; } public virtual Genre Genre { get; set; } public virtual Artist Artist { get; set; } public virtual List OrderDetails { get; set; } } } It's my class, not Entity Framework's, so I'm free to do what I want with it. I added a bunch of MVC 3 annotations for scaffolding and validation support, as shown below: using System.ComponentModel; using System.ComponentModel.DataAnnotations; using System.Web.Mvc; using System.Collections.Generic; namespace MvcMusicStore.Models { [Bind(Exclude = "AlbumId")] public class Album { [ScaffoldColumn(false)] public int AlbumId { get; set; } [DisplayName("Genre")] public int GenreId { get; set; } [DisplayName("Artist")] public int ArtistId { get; set; } [Required(ErrorMessage = "An Album Title is required")] [StringLength(160)] public string Title { get; set; } [Required(ErrorMessage = "Price is required")] [Range(0.01, 100.00, ErrorMessage = "Price must be between 0.01 and 100.00")] public decimal Price { get; set; } [DisplayName("Album Art URL")] [StringLength(1024)] public string AlbumArtUrl { get; set; } public virtual Genre Genre { get; set; } public virtual Artist Artist { get; set; } public virtual List<OrderDetail> OrderDetails { get; set; } } } The end result was that I had working EF Code First model code for the finished application. You can follow along through the tutorial to see how I built up to the finished model classes, starting with simple 2-3 property classes and building up to the full working schema. Thanks to Diego Vega (on the Entity Framework team) for pointing me to the DbContext template.

  Read the article

• CodePlex Daily Summary for Sunday, October 30, 2011

  CodePlex Daily Summary for Sunday, October 30, 2011Popular ReleasesKoober: Koober - The Ebook Creator 0.2: The official release of Koober as Open source. Koober is a ebook creator for Windows, and Koob Reader is the reader.?????????????: ??????????????: ??????????????VidCoder: 1.2.0: Updated to HandBrake svn 4311. Refactored to read in list of encoders from HandBrake itself. Added ffaac, FLAC audio and ffmpeg2 video. Reworked audio encoding UI: removed grid and gave each encoding more vertical space. Added audio quality targeting and compression. Added status messages. Added messages for a few events (encode start/stop, playing a preview clip, update available, update download finished). Made source and destination path UI elements smarter about what parts they cut ...patterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...Duckworth Lewis Professional Edition Calculator: DLcalc 3.0: DLcalc 3.0 can perform Duckworth/Lewis Professional Edition calculations 100% accurately. It also produces over-by-over and ball-by-ball PAR score tables.Folder Bookmarks: Folder Bookmarks 2.2.0.1: In this version: Custom Icons - now you can change the icons of the bookmarks. By default, whenever an image is added, the icon is automatically changed to a thumbnail of the picture. This can be turned off in the settings (Options... > Settings) Ability to remove items from the 'Recent' category Bugfixes - 'Choose' button in 'Edit Bookmark' now works Another bug fix: another problem in the 'Edit Bookmark' windowMedia Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...patterns & practices - Unity: Unity 3.0 for .NET4.5 Preview: The Unity 3.0.1026.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. The major changes include: Unity projects updated to target .NET 4.5. Dynamic build plans modified to use compiled lambda expressions instead of Reflection.Emit Converting reflection to use the new TypeInfo for reflection. Projects updated to work with the Microsoft Visual Studio 2011 Preview Notes/Known Issues: The Microsoft.Practices.Unity.UnityServiceLocator class cannot be use...Managed Extensibility Framework: MEF 2 Preview 4: Detailed information on this release is available on the BCL team blog.Image Converter: Image Converter 0.3: New Features: - English and German support Technical Improvements: - Microsoft All Rules using Code Analysis Planned Features for future release: 1. Unit testing 2. Command line interface 3. Automatic UpdatesAcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6?? ??“????”...Path Copy Copy: 8.0: New version that mostly adds lots of requested features: 11340 11339 11338 11337 This version also features a more elaborate Settings UI that has several tabs. I tried to add some notes to better explain the use and purpose of the various options. The Path Copy Copy documentation is also on the way, both to explain how to develop custom plugins and to explain how to pre-configure options if you're a network admin. Stay tuned.MVC Controls Toolkit: Mvc Controls Toolkit 1.5.0: Added: The new Client Blocks feaure of Views A new "move" js method for the TreeViews The NewHtmlCreated js event to the DataGrid Improved the ChoiceList structure that now allows also the selection list of a dropdown to be chosen with a lambda expression Improved the AcceptViewHintAttribute controller filter. Now a client can specify not only the name of a View or Partial View it prefers, but also to receive just the rough data in Json format. Now the the SMinimum and SMaximum par...Free SharePoint Master Pages: Buried Alive (Halloween) Theme: Release Notes *Created for Halloween, you will find theme file, custom css file and images. *Created by Al Roome @AlstarRoome Features: Custom styling for web part Custom background *Screenshot https://s3.amazonaws.com/kkhipple/post/sharepoint-showcase-halloween.pngDevForce Application Framework: DevForce AF 2.0.3 RTW: PrerequisitesWPF 4.0 Silverlight 4.0 DevForce 2010 6.1.3.1 Download ContentsDebug and Release Assemblies API Documentation Source code License.txt Requirements.txt Release HighlightsNew: EventAggregator event forwarding New: EntityManagerInterceptor<T> to intercept EntityManger events New: IHarnessAware to allow for ViewModel setup when executed inside of the Development Harness New: Improved design time stability New: Support for add-in development New: CoroutineFns.To...NicAudio: NicAudio 2.0.5: Minor change to accept special DTS stereo modes (LtRt, AB,...)NDepend TFS 2010 integration: version 0.5.0 beta 1: Only the activity and the VS plugin are avalaible right now. They basically work. Data types that are logged into tfs reports are subject to change. This is no big deal since data is not yet sent into the warehouse.Windows Azure Toolkit for Windows Phone: Windows Azure Toolkit for Windows Phone v1.3.1: Upgraded Windows Azure projects to Windows Azure Tools for Microsoft Visual Studio 2010 1.5 – September 2011 Upgraded the tools tools to support the Windows Phone Developer Tools RTW Update SQL Azure only scenarios to use ASP.NET Universal Providers (through the System.Web.Providers v1.0.1 NuGet package) Changed Shared Access Signature service interface to support more operations Refactored Blobs API to have a similar interface and usage to that provided by the Windows Azure SDK Stor...DotNetNuke® FAQ: 05.00.00: FAQ (Frequently Asked Questions) 05.00.00 will work for any DNN version 5.6.1 and up. It is the first version which is rewritten in C#. The scope of this update is to fix all known issues and improve user interface. Please review and rate this release... (stars are welcome)BUG FIXESManage Categories button text was not localized Edit/Add FAQ Entry: button text was not localized ENHANCEMENTSAdded an option to select the control for category display: Listbox with checkboxes (flat category ...New ProjectsalphaCards: Digitale LernkarteiBinary Code Interpreter: The Binary Code Interpreter is a small and funny programming languaage. This interpreter works a bit like a Turing Machine.Buscar ciudades: This is the source code for the application "Buscar ciudades" published in the Windows Phone Marketplace. CamOnWeb - Componente para WebCam: Este projeto tem como objetivo o desenvolvimento um componente para captura e exibição de videos da webcam. Compare.Net: Compare.Net is a configurable application to compare and reconclie from different sources. C# WPF applcation targeting .Net 4CSGame: Academic project for our studies. Subject "Client -server technology"curbside: curbsideDanish Language Pack for Community Server: Danish Language Packs for Community Server 2.1 and 2007. At its inception, this project contains quite incomplete translations to Danish. This project provides a common resource where all interested parties can gradually improve on this language pack. Please join to improve the contents. The source code tree contains two major folders: One for Community Server 2.1 and one for Community Server 2007.Dependency Variable Lib: ??????????????????、?????????????????????。（???????、?????????????ｗ） ???、「??×??＝??」???????????????、????????、????????、???「??×??」????????????????????????????????????。 FreedBack: FreedBack allows you to quickly and easily embed a configurable feedback form into any web application. It can be a standalone application that you install and deploy, then embed a bit of script into existing apps to implement feedback, or you can make it part of your MVC App.Hageveld - NieuwsModule (Chris' Tutorial: A news article manager made for educational purposes.Idea Resto: Aplicación para restaurantes.jqgridmvcgeneration: codesmith template that creates js, html and asp.net mvc server side json server for a jqgrid -based table on a arbitratrary database table. The code includes pagination and server side sorting. Jqgrid is a great jquery extension that provides an ajax-enabled fully customizable interactive table based on server side data. However, the actual coding can be a bit tedious and cryptic. This project provides a template base approach that basically performs two tasks: 1. creates a client si...MyClassMapper: A simple configurable classmapper for mapping ClassA to ClassB and vice versa, the ideas are borrowed from the Dozer project (http://dozer.sourceforge.net). Most code is based on 'Dynamic Access' code from Hongju Cao <hjcao_wei@hotmail.com> (All that code is located in the "DynamicAccess" sub-directory from the project.)NavigateTo Providers: This project is a collection of NavigateTo providers for Visual Studio 2010. NObsidian: A proxy component to access Obisidian Portal API from .NetNSession: The objective of this project is to allow ASP Classic to access ASP.NET out-of-process session stores in the same way that ASP.NET accesses them, and thus share the session state with ASP.NET.NTextile: NTextile is a lightweight, humane web compatible markup generator. It generates valid XHTML output using simple easy to remember conventions and text characters (a.k.a modifiers), to markup plain text. NTextile is especially useful to provide quick and valid markup for .NET web applications. For e.g. wikis, blogs, online forums, content management systems etc. This project was inspired by Dean Allen’s original Textile features, as included in the Textpattern content management application. T...OpenTasksBehaviorsLibrary for Windows Phone: Open Tasks Behavior for Windows Phone *OpenWebBrowserTask *OpenMediaLauncherTaskPowerShell Cmdlet Sample: PowerShell Cmdlet SamplePrismEx: PrismEx is a library of helpers and extension methods to allow developers to more easily develop and test Prism applications. QuickDelete: A Windows Explorer add-on to delete files and folders very quickly, much more so than the usual Explorer command. Works on Windows XP or later. Currently in EXPERIMENTAL state. No releases have been produced yet.Quiz Module for DotNetNuke: This is a module that allows you to quickly and easily provide a quiz that can be taken by the visitors on your DotNetNuke website.RaptorDB - The Key Value Store: Smallest, fastest embedded nosql persisted dictionary using b+tree or MurMur hash indexing. (Now with Hybrid WAH bitmap indexes)Rockin CMS-LMS Combo: RockinCmsLms Combo provides a great way for users to build their content and training sites with one great tool. It will be developed with C# 4.0-4.5, Silverlight, JQuery, and ASP.Net and MVC 3.0 with Razor. This project will demonstrate how to use todays technologies to build solutions that last. We may have 2 versions - one with a local db and one with a Windows Azure storage solution. Suggest using the Web Platform Installer to get all of the components.SandKeeper - Time Tracking Addin for Outlook 2010 tasks: SandKeeper is an Outlook Addin that enables you to track time for your tasks.Share: Share is a new web-based content management system. For more information about this project, please visit http://blog.aphysoft.com.SharePoint 2010 ViewEdit Group By Content Type: A simple project that injects JavaScript into the ribbon bar area to add "Content Type" as a choice on the ViewEdit.aspx page. With this, users can once again create views that group by Content Type without having to use SharePoint Designer 2010.Simple Merge Sort: This is a simple implementation of Merge-Sort, using to sort an Array of Integers.UKag: Unity3D?Kr2/KAG3??moduleUsingLinq: TestUtec Logger: Utec Logger is meant to be used the Turbo XS UTEC and UTEC Delta. It is simply a data logger application, it will auto logged based on pre defined conditionals. It also takes this information and displays it in a two dimensional table, averaging the values appropriately to ease of log analysis.WOXalizer: Fork of WOX project. http://woxserializer.sourceforge.net/Zeta Backup Validator: A small .NET 3.5 console application that helps you verifying whether your backups succeed by checking files and folders with various configurable rules (folder size, file age, etc.).Zeta Links: A web application for generating and measuring shortcut hyperlinks, similar to bit.ly.Zombie Slayer v1.0: Zombie Slayer v1.0 is an action first person shooter where players can try and survive a never-ending wave of zombies for as long as they can while a timer keeps track of how long they survived and posts times online from longest to shortest.?????????????: ??????????????????，????。

  Read the article

• ?Oracle Database 12c????Information Lifecycle Management ILM?Storage Enhancements

  - by Liu Maclean(???)

  Oracle Database 12c????Information Lifecycle Management ILM ?????????Storage Enhancements ???????? Lifecycle Management ILM ????????? Automatic Data Placement ??????, ??ADP? ?????? 12c???????Datafile??? Online Move Datafile, ????????????????datafile???????,??????????????? ????(12.1.0.1)Automatic Data Optimization?heat map????????: ????????? (CDB)?????Automatic Data Optimization?heat map Row-level policies for ADO are not supported for Temporal Validity. Partition-level ADO and compression are supported if partitioned on the end-time columns. Row-level policies for ADO are not supported for in-database archiving. Partition-level ADO and compression are supported if partitioned on the ORA_ARCHIVE_STATE column. Custom policies (user-defined functions) for ADO are not supported if the policies default at the tablespace level. ADO does not perform checks for storage space in a target tablespace when using storage tiering. ADO is not supported on tables with object types or materialized views. ADO concurrency (the number of simultaneous policy jobs for ADO) depends on the concurrency of the Oracle scheduler. If a policy job for ADO fails more than two times, then the job is marked disabled and the job must be manually enabled later. Policies for ADO are only run in the Oracle Scheduler maintenance windows. Outside of the maintenance windows all policies are stopped. The only exceptions are those jobs for rebuilding indexes in ADO offline mode. ADO has restrictions related to moving tables and table partitions. ??????row,segment???????????ADO??,?????create table?alter table?????? ????ADO??,??????????????,???????????????? storage tier , ?????????storage tier?????????, ??????????????ADO??????????? segment?row??group? ?CREATE TABLE?ALERT TABLE???ILM???,??????????????????ADO policy? ??ILM policy???????????????? ??????? ????ADO policy, ?????alter table  ???????,?????????????? CREATE TABLE sales_ado (PROD_ID NUMBER NOT NULL, CUST_ID NUMBER NOT NULL, TIME_ID DATE NOT NULL, CHANNEL_ID NUMBER NOT NULL, PROMO_ID NUMBER NOT NULL, QUANTITY_SOLD NUMBER(10,2) NOT NULL, AMOUNT_SOLD NUMBER(10,2) NOT NULL ) ILM ADD POLICY COMPRESS FOR ARCHIVE HIGH SEGMENT AFTER 6 MONTHS OF NO ACCESS; SQL> SELECT SUBSTR(policy_name,1,24) AS POLICY_NAME, policy_type, enabled 2 FROM USER_ILMPOLICIES; POLICY_NAME POLICY_TYPE ENABLED -------------------- -------------------------- -------------- P41 DATA MOVEMENT YES ALTER TABLE sales MODIFY PARTITION sales_1995 ILM ADD POLICY COMPRESS FOR ARCHIVE HIGH SEGMENT AFTER 6 MONTHS OF NO ACCESS; SELECT SUBSTR(policy_name,1,24) AS POLICY_NAME, policy_type, enabled FROM USER_ILMPOLICIES; POLICY_NAME POLICY_TYPE ENABLE ------------------------ ------------- ------ P1 DATA MOVEMENT YES P2 DATA MOVEMENT YES /* You can disable an ADO policy with the following */ ALTER TABLE sales_ado ILM DISABLE POLICY P1; /* You can delete an ADO policy with the following */ ALTER TABLE sales_ado ILM DELETE POLICY P1; /* You can disable all ADO policies with the following */ ALTER TABLE sales_ado ILM DISABLE_ALL; /* You can delete all ADO policies with the following */ ALTER TABLE sales_ado ILM DELETE_ALL; /* You can disable an ADO policy in a partition with the following */ ALTER TABLE sales MODIFY PARTITION sales_1995 ILM DISABLE POLICY P2; /* You can delete an ADO policy in a partition with the following */ ALTER TABLE sales MODIFY PARTITION sales_1995 ILM DELETE POLICY P2; ILM ???????: ?????ILM ADP????,???????: ?????? ???? activity tracking, ????2????????,???????????????????: SEGMENT-LEVEL???????????????????? ROW-LEVEL????????,??????? ????????: 1??????? SEGMENT-LEVEL activity tracking ALTER TABLE interval_sales ILM  ENABLE ACTIVITY TRACKING SEGMENT ACCESS ???????INTERVAL_SALES??segment level  activity tracking,?????????????????? 2? ??????????? ALTER TABLE emp ILM ENABLE ACTIVITY TRACKING (CREATE TIME , WRITE TIME); 3????????? ALTER TABLE emp ILM ENABLE ACTIVITY TRACKING  (READ TIME); ?12.1.0.1.0?????? ??HEAT_MAP??????????, ?????system??session?????heap_map????????????? ?????????HEAT MAP??,? ALTER SYSTEM SET HEAT_MAP = ON; ?HEAT MAP??????,??????????????????????????  ??SYSTEM?SYSAUX????????????? ???????HEAT MAP??: ALTER SYSTEM SET HEAT_MAP = OFF; ????? HEAT_MAP????, ?HEAT_MAP??? ?????????????????????? ?HEAT_MAP?????????Automatic Data Optimization (ADO)??? ??ADO??,Heat Map ?????????? ????V$HEAT_MAP_SEGMENT ??????? HEAT MAP?? SQL> select * from V$heat_map_segment; no rows selected SQL> alter session set heat_map=on; Session altered. SQL> select * from scott.emp; EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO ---------- ---------- --------- ---------- --------- ---------- ---------- ---------- 7369 SMITH CLERK 7902 17-DEC-80 800 20 7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30 7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30 7566 JONES MANAGER 7839 02-APR-81 2975 20 7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30 7698 BLAKE MANAGER 7839 01-MAY-81 2850 30 7782 CLARK MANAGER 7839 09-JUN-81 2450 10 7788 SCOTT ANALYST 7566 19-APR-87 3000 20 7839 KING PRESIDENT 17-NOV-81 5000 10 7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30 7876 ADAMS CLERK 7788 23-MAY-87 1100 20 7900 JAMES CLERK 7698 03-DEC-81 950 30 7902 FORD ANALYST 7566 03-DEC-81 3000 20 7934 MILLER CLERK 7782 23-JAN-82 1300 10 14 rows selected. SQL> select * from v$heat_map_segment; OBJECT_NAME SUBOBJECT_NAME OBJ# DATAOBJ# TRACK_TIM SEG SEG FUL LOO CON_ID -------------------- -------------------- ---------- ---------- --------- --- --- --- --- ---------- EMP 92997 92997 23-JUL-13 NO NO YES NO 0 ??v$heat_map_segment???,?v$heat_map_segment??????????????X$HEATMAPSEGMENT V$HEAT_MAP_SEGMENT displays real-time segment access information. Column Datatype Description OBJECT_NAME VARCHAR2(128) Name of the object SUBOBJECT_NAME VARCHAR2(128) Name of the subobject OBJ# NUMBER Object number DATAOBJ# NUMBER Data object number TRACK_TIME DATE Timestamp of current activity tracking SEGMENT_WRITE VARCHAR2(3) Indicates whether the segment has write access: (YES or NO) SEGMENT_READ VARCHAR2(3) Indicates whether the segment has read access: (YES or NO) FULL_SCAN VARCHAR2(3) Indicates whether the segment has full table scan: (YES or NO) LOOKUP_SCAN VARCHAR2(3) Indicates whether the segment has lookup scan: (YES or NO) CON_ID NUMBER The ID of the container to which the data pertains. Possible values include:   0: This value is used for rows containing data that pertain to the entire CDB. This value is also used for rows in non-CDBs. 1: This value is used for rows containing data that pertain to only the root n: Where n is the applicable container ID for the rows containing data The Heat Map feature is not supported in CDBs in Oracle Database 12c, so the value in this column can be ignored. ??HEAP MAP??????????????????,????DBA_HEAT_MAP_SEGMENT???????? ???????HEAT_MAP_STAT$?????? ??Automatic Data Optimization??????: ????1: SQL> alter system set heat_map=on; ?????? ????????????? scott?? http://www.askmaclean.com/archives/scott-schema-script.html SQL> grant all on dbms_lock to scott; ????? SQL> grant dba to scott; ????? @ilm_setup_basic C:\APP\XIANGBLI\ORADATA\MACLEAN\ilm.dbf @tktgilm_demo_env_setup SQL> connect scott/tiger ; ???? SQL> select count(*) from scott.employee; COUNT(*) ---------- 3072 ??? 1 ?? SQL> set serveroutput on SQL> exec print_compression_stats('SCOTT','EMPLOYEE'); Compression Stats ------------------ Uncmpressed : 3072 Adv/basic compressed : 0 Others : 0 PL/SQL ???????? ???????3072?????? ????????? ????policy ???????????? alter table employee ilm add policy row store compress advanced row after 3 days of no modification / SQL> set serveroutput on SQL> execute list_ilm_policies; -------------------------------------------------- Policies defined for SCOTT -------------------------------------------------- Object Name------ : EMPLOYEE Subobject Name--- : Object Type------ : TABLE Inherited from--- : POLICY NOT INHERITED Policy Name------ : P1 Action Type------ : COMPRESSION Scope------------ : ROW Compression level : ADVANCED Tier Tablespace-- : Condition type--- : LAST MODIFICATION TIME Condition days--- : 3 Enabled---------- : YES -------------------------------------------------- PL/SQL ???????? SQL> select sysdate from dual; SYSDATE -------------- 29-7? -13 SQL> execute set_back_chktime(get_policy_name('EMPLOYEE',null,'COMPRESSION','ROW','ADVANCED',3,null,null),'EMPLOYEE',null,6); Object check time reset ... -------------------------------------- Object Name : EMPLOYEE Object Number : 93123 D.Object Numbr : 93123 Policy Number : 1 Object chktime : 23-7? -13 08.13.42.000000 ?? Distnt chktime : 0 -------------------------------------- PL/SQL ???????? ?policy?chktime???6??, ????set_back_chktime???????????????“????”?,?????????,???????? ?????? alter system flush buffer_cache; alter system flush buffer_cache; alter system flush shared_pool; alter system flush shared_pool; SQL> execute set_window('MONDAY_WINDOW','OPEN'); Set Maint. Window OPEN ----------------------------- Window Name : MONDAY_WINDOW Enabled? : TRUE Active? : TRUE ----------------------------- PL/SQL ???????? SQL> exec dbms_lock.sleep(60) ; PL/SQL ???????? SQL> exec print_compression_stats('SCOTT', 'EMPLOYEE'); Compression Stats ------------------ Uncmpressed : 338 Adv/basic compressed : 2734 Others : 0 PL/SQL ???????? ??????????????? Adv/basic compressed : 2734 ??????? SQL> col object_name for a20 SQL> select object_id,object_name from dba_objects where object_name='EMPLOYEE'; OBJECT_ID OBJECT_NAME ---------- -------------------- 93123 EMPLOYEE SQL> execute list_ilm_policy_executions ; -------------------------------------------------- Policies execution details for SCOTT -------------------------------------------------- Policy Name------ : P22 Job Name--------- : ILMJOB48 Start time------- : 29-7? -13 08.37.45.061000 ?? End time--------- : 29-7? -13 08.37.48.629000 ?? ----------------- Object Name------ : EMPLOYEE Sub_obj Name----- : Obj Type--------- : TABLE ----------------- Exec-state------- : SELECTED FOR EXECUTION Job state-------- : COMPLETED SUCCESSFULLY Exec comments---- : Results comments- : --- -------------------------------------------------- PL/SQL ???????? ILMJOB48?????policy?JOB,?12.1.0.1??J00x???? ?MMON_SLAVE???M00x???15????????? select sample_time,program,module,action from v$active_session_history where action ='KDILM background EXEcution' order by sample_time; 29-7? -13 08.16.38.369000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.17.38.388000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.17.39.390000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.23.38.681000000 ?? ORACLE.EXE (M002) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.32.38.968000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.33.39.993000000 ?? ORACLE.EXE (M003) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.33.40.993000000 ?? ORACLE.EXE (M003) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.36.40.066000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.37.42.258000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.37.43.258000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.37.44.258000000 ?? ORACLE.EXE (M000) MMON_SLAVE KDILM background EXEcution 29-7? -13 08.38.42.386000000 ?? ORACLE.EXE (M001) MMON_SLAVE KDILM background EXEcution select distinct action from v$active_session_history where action like 'KDILM%' KDILM background CLeaNup KDILM background EXEcution SQL> execute set_window('MONDAY_WINDOW','CLOSE'); Set Maint. Window CLOSE ----------------------------- Window Name : MONDAY_WINDOW Enabled? : TRUE Active? : FALSE ----------------------------- PL/SQL ???????? SQL> drop table employee purge ; ????? ???? ????? spool ilm_usecase_1_cleanup.lst @ilm_demo_cleanup ; spool off

  Read the article

< Previous Page | 15 16 17 18 19 20  | Next Page >