Search Results

Search found 1516 results on 61 pages for 'cards'.

Page 19/61 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• First ATMs programming language

  - by revo

  First ATMs performed tasks like a cash dispenser, they were offline machines which worked with punch cards impregnated with Carbon and a 6-digit PIN code. Maximum withdrawal with a card was 10 pounds and each one was a one-time use card - ATM swallowed cards! The first ATM was installed in London in the year 1967, as I looked at time line of programming languages, there were many programming languages made before that decade. I don't know about the hardware neither, but in which programming language it was written? *I didn't find a detailed biography of John Shepherd-Barron (ATM inventor at 70s) Update I found this picture, which is taken from a newspaper back to the year 1972 in Iran. Translated PS : Shows Mr. Rad-lon (if spelled correctly), The manager of Barros (if spelled correctly) International Educational Institute in United Kingdom at the right, and Mr. Jim Sutherland - Expert of Computer Kiosks. In the rest of the text I found on this paper, these kind of ATMs which called "Automated Computer Kiosk" were advertised with this: Mr. Rad-lon (if spelled correctly) puts his card to one specific location of Automated Computer Kiosk and after 10 seconds he withdraws his cash. Two more questions are: 1- How those ATMs were so fast? (withdrawal in 10 seconds in that year) 2- I didn't find any text on Internet which state about "Automated Computer Kiosk", Is it valid or were they being called Computer in that time?

  Read the article

• Ubuntu does not recognize my built-in monitor.

  - by B3tturTh3nU

  I've recently discovered of a boot problem Ubuntu has with my laptop. I have successfully installed Ubuntu on two other computers, and I've never experienced this problem. What happens is, after the live boot CD loads, the screen goes completely blank. Although, I suspected that there was no problem booting, so I loaded with BIOS only, which worked perfectly fine. Of course, not being very proficient with this, I have no idea what needs to be done to fix the problem. I have switchable graphics cards(the ATI Mobility Radeon HD 5650, and some low-end Intel card), and an Intel i5 quad core processor. I was booting with the Ubuntu 10.10 64 bit desktop distribution. If there's any more information you need from me, please let me know. EDIT: I was able to look into this a bit more, thanks to one of the comments provided, and I have some new information. Ubuntu does seem to be able to recognize both of my graphics cards. The problem I found was that, in the Xorg.0 log, it mentions that there were "no screens found." I'm using a notebook, so the screen is built in. Does anyone know of a way to get Ubuntu to recognize the monitor?

  Read the article

• rfid programming

  - by MaKo

  hi guys, I got a gift from a friend, 2 readers for RFID, and some cards (from a Chinese company called daily rfid), the kind of work, because it comes with some demo software written in Delphi, that reads the id of the card (myfare compatible, ISO14443A ) but the problem is that if I try to use the demo to write to them, it doesnt seem to work, it have another demo written in c#, (compiled and executable from /bin/debug, the DL600DemoCSharp.exe), the software opens, but when click on connect, I get this error Unhanded exception.. unable to load DLL 'BasicB.DLL' so I load the dll on windows/system32, but when I try regsvr32 BasicB.dll I get, error the module "BasicB.dll" was loaded but hte entry-point DllRegisterServer was not found. Make sure that "BasicB.dll" is a valid DLL or OCX file and then try again have written to the company but no response, I program in objective C, so I kind of understand c#, but how to make this cards work? - shall I continue with the delphi, and try to write to them with it - or with c# - either way I would have to write the code to read write to them,, or is there any software to work with this modules?? thanks a lot!

  Read the article

• radeon display driver clones monitors while using Xinerama

  - by gregmuellegger

  I'm trying to get my two Radeon HD 4770 cards working with three monitors. Xinerama works so far in the way that I have two fully working monitors were I can move windows from one to the other. My problem now is that my third monitor is a clone of my second monitor (displaying the exact same thing). These monitors are connected to the same graphic card ("Screen Middle" and "Screen Right" in the xorg.conf below). Here is my xorg.conf: Section "ServerLayout" Identifier "ThreeMonitors" Screen "Screen Left" 0 0 Screen "Screen Middle" RightOf "Screen Left" Screen "Screen Right" RightOf "Screen Middle" Option "Xinerama" EndSection Section "Monitor" Identifier "Monitor Left" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Middle" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Right" Option "DPMS" EndSection Section "Device" Identifier "Device Left" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:3:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Left" Device "Device Left" Monitor "Monitor Left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Middle" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Middle" Device "Device Middle" Monitor "Monitor Middle" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Right" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:1" Screen 1 EndSection Section "Screen" Identifier "Screen Right" Device "Device Right" Monitor "Monitor Right" SubSection "Display" Depth 24 EndSubSection EndSection I'm using a fresh Kubuntu 10.10 installation with propsed-updates enabled since this repo contains a xorg fix for using multiple graphic cards. I hope someone can help me out. Very many thanks!!

  Read the article

• WiFi problems on several Ubuntu installations

  - by Rickyfresh

  Okay this is the first time I have ever had to ask a question as usually the Ubuntu community have answered everything already but on this occasion there are many people asking for the answer but not one good solution has become available so far so someone please help or I will have to install Windows on my sons and my girlfriends PCs and that would be a disaster as I am trying to help convince people to move from Windows. I installed 12.04 on three computers on the same day. Dell Inspiron (Works Perfect) Toshiba Satellite Home built Desktop The Dell works perfect but the other two either keep losing connection to the wireless Internet and even when they are connected they stop connecting to web sites, for some reason it searches Google fine but will not connect to web sites when a link is clicked. So far people have recommended in other forums: Removing network manager and installing wicd (didn't solve it) Changing the MTU in the wireless settings (didn't solve it) All sorts of messing about with Firefox settings (this doesn't solve it and even if it did this would leave most average PC users scratching their heads and wishing they had stuck to windows) The problem exists on two very different machines and different wireless cards so I doubt its a driver or hardware issue, also many other Ubuntu users are having the same problem with a vast array of different machines and wireless cards. Can someone please give a good solution to this as its going to turn a lot of people away from Ubuntu if they cannot get this sorted. I would give some PC specs but the two machines are vastly different and the other people complaining of this problem also have very different systems all showing the same problem.

  Read the article

• Data model for unlockable card collection

  - by Karlos Zafra

  My game has a collection of cards (about 64) that are unlocked (one by one) provided that 4 items are collected/gained in the game. Right now the deck of cards is modeled with a plist file, like this: <plist> <dict> <key>card1</key> <dict> <key>available</key> <true/> <key>series</key> <integer>1</integer> <key>model</key> <integer>1</integer> <key>color</key> <integer>1</integer> </dict> <key>card2</key> <dict> <key>available</key> <false/> <key>series</key> <integer>1</integer> <key>model</key> <integer>1</integer> <key>color</key> <integer>2</integer> </dict> The value for the key named "available" marks if the item is locked or not. Right now I have to include the data for the items collected by the user, but including that inside the plist looks like too much hassle. What kind of structure should be more suitable for this? How do you manage a collection of unlockable items like this?

  Read the article

• I get java.lang.NullPointerException when trying to get the contents of the database in Android

  - by ncountr

  I am using 8 EditText boxes from the NewCard.xml from which i am taking the values and when the save button is pressed i am storing the values into a database, in the same process of saving i am trying to get the values and present them into 8 different TextView boxes on the main.xml file and when i press the button i get an FC from the emulator and the resulting error is java.lang.NullPointerException. If Some 1 could help me that would be great, since i have never used databases and this is my first application for android and this is the only thing keepeng me to complete the whole thing and publish it on the market like a free app. Here's the full code from NewCard.java. public class NewCard extends Activity { private static String[] FROM = { _ID, FIRST_NAME, LAST_NAME, POSITION, POSTAL_ADDRESS, PHONE_NUMBER, FAX_NUMBER, MAIL_ADDRESS, WEB_ADDRESS}; private static String ORDER_BY = FIRST_NAME; private CardsData cards; EditText First_Name; EditText Last_Name; EditText Position; EditText Postal_Address; EditText Phone_Number; EditText Fax_Number; EditText Mail_Address; EditText Web_Address; Button New_Cancel; Button New_Save; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.newcard); cards = new CardsData(this); //Define the Cancel Button in NewCard Activity New_Cancel = (Button) this.findViewById(R.id.new_cancel_button); //Define the Cancel Button Activity/s New_Cancel.setOnClickListener ( new OnClickListener() { public void onClick(View arg0) { NewCancelDialog(); } } );//End of the Cancel Button Activity/s //Define the Save Button in NewCard Activity New_Save = (Button) this.findViewById(R.id.new_save_button); //Define the EditText Fields to Get Their Values Into the Database First_Name = (EditText) this.findViewById(R.id.new_first_name); Last_Name = (EditText) this.findViewById(R.id.new_last_name); Position = (EditText) this.findViewById(R.id.new_position); Postal_Address = (EditText) this.findViewById(R.id.new_postal_address); Phone_Number = (EditText) this.findViewById(R.id.new_phone_number); Fax_Number = (EditText) this.findViewById(R.id.new_fax_number); Mail_Address = (EditText) this.findViewById(R.id.new_mail_address); Web_Address = (EditText) this.findViewById(R.id.new_web_address); //Define the Save Button Activity/s New_Save.setOnClickListener ( new OnClickListener() { public void onClick(View arg0) { //Add Code For Saving The Attributes Into The Database try { addCard(First_Name.getText().toString(), Last_Name.getText().toString(), Position.getText().toString(), Postal_Address.getText().toString(), Integer.parseInt(Phone_Number.getText().toString()), Integer.parseInt(Fax_Number.getText().toString()), Mail_Address.getText().toString(), Web_Address.getText().toString()); Cursor cursor = getCard(); showCard(cursor); } finally { cards.close(); NewCard.this.finish(); } } } );//End of the Save Button Activity/s } //======================================================================================// //DATABASE FUNCTIONS private void addCard(String firstname, String lastname, String position, String postaladdress, int phonenumber, int faxnumber, String mailaddress, String webaddress) { // Insert a new record into the Events data source. // You would do something similar for delete and update. SQLiteDatabase db = cards.getWritableDatabase(); ContentValues values = new ContentValues(); values.put(FIRST_NAME, firstname); values.put(LAST_NAME, lastname); values.put(POSITION, position); values.put(POSTAL_ADDRESS, postaladdress); values.put(PHONE_NUMBER, phonenumber); values.put(FAX_NUMBER, phonenumber); values.put(MAIL_ADDRESS, mailaddress); values.put(WEB_ADDRESS, webaddress); db.insertOrThrow(TABLE_NAME, null, values); } private Cursor getCard() { // Perform a managed query. The Activity will handle closing // and re-querying the cursor when needed. SQLiteDatabase db = cards.getReadableDatabase(); Cursor cursor = db.query(TABLE_NAME, FROM, null, null, null, null, ORDER_BY); startManagingCursor(cursor); return cursor; } private void showCard(Cursor cursor) { // Stuff them all into a big string long id = 0; String firstname = null; String lastname = null; String position = null; String postaladdress = null; long phonenumber = 0; long faxnumber = 0; String mailaddress = null; String webaddress = null; while (cursor.moveToNext()) { // Could use getColumnIndexOrThrow() to get indexes id = cursor.getLong(0); firstname = cursor.getString(1); lastname = cursor.getString(2); position = cursor.getString(3); postaladdress = cursor.getString(4); phonenumber = cursor.getLong(5); faxnumber = cursor.getLong(6); mailaddress = cursor.getString(7); webaddress = cursor.getString(8); } // Display on the screen add for each textView TextView ids = (TextView) findViewById(R.id.id); TextView fn = (TextView) findViewById(R.id.firstname); TextView ln = (TextView) findViewById(R.id.lastname); TextView pos = (TextView) findViewById(R.id.position); TextView pa = (TextView) findViewById(R.id.postaladdress); TextView pn = (TextView) findViewById(R.id.phonenumber); TextView fxn = (TextView) findViewById(R.id.faxnumber); TextView ma = (TextView) findViewById(R.id.mailaddress); TextView wa = (TextView) findViewById(R.id.webaddress); ids.setText(String.valueOf(id)); fn.setText(String.valueOf(firstname)); ln.setText(String.valueOf(lastname)); pos.setText(String.valueOf(position)); pa.setText(String.valueOf(postaladdress)); pn.setText(String.valueOf(phonenumber)); fxn.setText(String.valueOf(faxnumber)); ma.setText(String.valueOf(mailaddress)); wa.setText(String.valueOf(webaddress)); } //======================================================================================// //Define the Dialog that alerts you when you press the Cancel button private void NewCancelDialog() { new AlertDialog.Builder(this) .setMessage("Are you sure you want to cancel?") .setTitle("Cancel") .setCancelable(false) .setPositiveButton("Yes", new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { NewCard.this.finish(); } }) .setNegativeButton("No", new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { dialog.cancel(); } }) .show(); }//End of the Cancel Dialog }

  Read the article

• How can I determine which GPU card is running at PCI Express 2.0 x16 & which is using x8?

  - by M. Tibbits

  Is there a way to determine the speed of the PCI Express connection to a specific card? I have three cards plugged in: two Nvidia GTX 480's (one at x16 & and one at x8) one Nvidia GTX 460 running at x8 Is there some way, either by a function call in C or an option to lspci that I can determine the bus speed of the graphics cards? When I only use one of the cards for my CUDA program, I'd like to use the one which is running at x16. Thanks! Note: lspci -vvv dumps out For the two GTX 480s. I don't see any differences that pertain to bus speed. 03:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at df00 [disabled] [size=128] [virtual] Expansion ROM at b8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 03:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: <access denied> 04:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at cf00 [size=128] [virtual] Expansion ROM at c8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 04:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> And the only differences I see relate specifically to the memory mapping: myComputer:~> diff card1 card2 3c3 < Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 7,11c7,11 < Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] < Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] < Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] < Region 5: I/O ports at df00 [disabled] [size=128] < [virtual] Expansion ROM at b8000000 [disabled] [size=512K] --- > Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] > Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] > Region 5: I/O ports at cf00 [size=128] > [virtual] Expansion ROM at c8000000 [disabled] [size=512K] 18c18 < Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 19a20 > Latency: 0, Cache Line Size: 64 bytes 21c22 < Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] --- > Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]

  Read the article

• Oracle NoSQL Database Exceeds 1 Million Mixed YCSB Ops/Sec

  - by Charles Lamb

  We ran a set of YCSB performance tests on Oracle NoSQL Database using SSD cards and Intel Xeon E5-2690 CPUs with the goal of achieving 1M mixed ops/sec on a 95% read / 5% update workload. We used the standard YCSB parameters: 13 byte keys and 1KB data size (1,102 bytes after serialization). The maximum database size was 2 billion records, or approximately 2 TB of data. We sized the shards to ensure that this was not an "in-memory" test (i.e. the data portion of the B-Trees did not fit into memory). All updates were durable and used the "simple majority" replica ack policy, effectively 'committing to the network'. All read operations used the Consistency.NONE_REQUIRED parameter allowing reads to be performed on any replica. In the past we have achieved 100K ops/sec using SSD cards on a single shard cluster (replication factor 3) so for this test we used 10 shards on 15 Storage Nodes with each SN carrying 2 Rep Nodes and each RN assigned to its own SSD card. After correcting a scaling problem in YCSB, we blew past the 1M ops/sec mark with 8 shards and proceeded to hit 1.2M ops/sec with 10 shards.  Hardware Configuration We used 15 servers, each configured with two 335 GB SSD cards. We did not have homogeneous CPUs across all 15 servers available to us so 12 of the 15 were Xeon E5-2690, 2.9 GHz, 2 sockets, 32 threads, 193 GB RAM, and the other 3 were Xeon E5-2680, 2.7 GHz, 2 sockets, 32 threads, 193 GB RAM.  There might have been some upside in having all 15 machines configured with the faster CPU, but since CPU was not the limiting factor we don't believe the improvement would be significant. The client machines were Xeon X5670, 2.93 GHz, 2 sockets, 24 threads, 96 GB RAM. Although the clients had 96 GB of RAM, neither the NoSQL Database or YCSB clients require anywhere near that amount of memory and the test could have just easily been run with much less. Networking was all 10GigE. YCSB Scaling Problem We made three modifications to the YCSB benchmark. The first was to allow the test to accommodate more than 2 billion records (effectively int's vs long's). To keep the key size constant, we changed the code to use base 32 for the user ids. The second change involved to the way we run the YCSB client in order to make the test itself horizontally scalable.The basic problem has to do with the way the YCSB test creates its Zipfian distribution of keys which is intended to model "real" loads by generating clusters of key collisions. Unfortunately, the percentage of collisions on the most contentious keys remains the same even as the number of keys in the database increases. As we scale up the load, the number of collisions on those keys increases as well, eventually exceeding the capacity of the single server used for a given key.This is not a workload that is realistic or amenable to horizontal scaling. YCSB does provide alternate key distribution algorithms so this is not a shortcoming of YCSB in general. We decided that a better model would be for the key collisions to be limited to a given YCSB client process. That way, as additional YCSB client processes (i.e. additional load) are added, they each maintain the same number of collisions they encounter themselves, but do not increase the number of collisions on a single key in the entire store. We added client processes proportionally to the number of records in the database (and therefore the number of shards). This change to the use of YCSB better models a use case where new groups of users are likely to access either just their own entries, or entries within their own subgroups, rather than all users showing the same interest in a single global collection of keys. If an application finds every user having the same likelihood of wanting to modify a single global key, that application has no real hope of getting horizontal scaling. Finally, we used read/modify/write (also known as "Compare And Set") style updates during the mixed phase. This uses versioned operations to make sure that no updates are lost. This mode of operation provides better application behavior than the way we have typically run YCSB in the past, and is only practical at scale because we eliminated the shared key collision hotspots.It is also a more realistic testing scenario. To reiterate, all updates used a simple majority replica ack policy making them durable. Scalability Results In the table below, the "KVS Size" column is the number of records with the number of shards and the replication factor. Hence, the first row indicates 400m total records in the NoSQL Database (KV Store), 2 shards, and a replication factor of 3. The "Clients" column indicates the number of YCSB client processes. "Threads" is the number of threads per process with the total number of threads. Hence, 90 threads per YCSB process for a total of 360 threads. The client processes were distributed across 10 client machines. Shards KVS Size Clients Mixed (records) Threads OverallThroughput(ops/sec) Read Latencyav/95%/99%(ms) Write Latencyav/95%/99%(ms) 2 400m(2x3) 4 90(360) 302,152 0.76/1/3 3.08/8/35 4 800m(4x3) 8 90(720) 558,569 0.79/1/4 3.82/16/45 8 1600m(8x3) 16 90(1440) 1,028,868 0.85/2/5 4.29/21/51 10 2000m(10x3) 20 90(1800) 1,244,550 0.88/2/6 4.47/23/53

  Read the article

• micro-SD card initialization using SPI interface

  - by Ron

  I'm using a micro-SD card in an embedded design. The card is connected to a microcontroller using the SPI interface. It worked fine for all cards I've used before, but now my new card will not initialize. The card is a Transcend 2GB micro-SD card (TS2GUSD). After sending the initial clock train to switch to SPI mode I do the following: 1) CMD0 (Argument 0, CRC 0x95) - Response 0x01 - OK 2) CMD8 (Argument 0x000001AA, CRC 0x87) - Response 0x01 0x000001AA - Means it's SDC V2+ card, the Voltage range 2.7V~3.6V is supported - OK Then I should send the ACMD41 command, but when sending the CMD55 (argument 0, CRC 0) that must precede CMD41, I get response 0x05 - Illegal Command. I've also tried to send CMD1 (for MMC cards), but it gives a similar Illegal Command response. The code works fine with my Sandisk 2GB micro-SD card. Does anyone have any idea? Thanks, -Ron-

  Read the article

• Any good card game AI strategies?

  - by Mark

  What would be strategies for writing a good computer opponent for a card game? Most card games are games of incomplete information, so simply mapping out and traversing the game tree as one could do with a board game does not seem too promising. Maybe one could track what open cards are in the game (as soon as they are revealed) and assign probabilities to certain events (e.g. opponent still has 2 cards of clubs). Does anyone have experience with this? Links and directions greatly appreciated. Thanks! -Mark

  Read the article

• Problems with makeObjectsPerformSelector inside and outside a class?

  - by QuakAttak

  A friend and I are creating a card game for the iPhone, and in these early days of the project, I'm developing a Deck class and a Card class to keep up with the cards. I'm wanting to test the shuffle method of the Deck class, but I am not able to show the values of the cards in the Deck class instance. The Deck class has a NSArray of Card objects that have a method called displayCard that shows the value and suit using console output(printf or NSLog). In order to show what cards are in a Deck instance all at once, I am using this, [deck makeObjectsPerformSelector:@selector(displayCard)], where deck is the NSArray in the Deck class. Inside of the Deck class, nothing is displayed on the console output. But in a test file, it works just fine. Here's the test file that creates its own NSArray: #import <Foundation/Foundation.h> #import "card.h" int main (int argc, char** argv) { NSAutoreleasePool* pool = [[NSAutoreleasePool alloc] init]; Card* two = [[Card alloc] initValue:2 withSuit:'d']; Card* three = [[Card alloc] initValue:3 withSuit:'h']; Card* four = [[Card alloc] initValue:4 withSuit:'c']; NSArray* deck = [NSArray arrayWithObjects:two,three,four,nil]; //Ok, what if we release the objects in the array before they're used? //I don't think this will work... [two release]; [three release]; [four release]; //Ok, it works... I wonder how... //Hmm... how will this work? [deck makeObjectsPerformSelector:@selector(displayCard)]; //Yay! It works fine! [pool release]; return 0; } This worked beautifully, so I created an initializer around this idea, creating 52 card objects one at a time and adding them to the NSArray using deck = [deck arrayByAddingObject:newCard]. Is the real problem with how I'm using makeObjectsPerformSelector or something before/after it?

  Read the article

• Writing a blackjack console program in Java

  - by user337465

  Hello, I have an assignment of making a blackjack like program in a class. My first problem I am dealing with is creating an array of the cards. The professor wants an array setup with a txt file with the following format. 2 of hearts 2 of diamonds 2 of spades 2 of clubs 3 of hearts 3 of diamonds 3 of spades This goes on till face cards when it replaces the number with jack, queen, king, ace. Following the professors requirements, How would I take input from the txt file and just store the number and the hearts,diamonds,spades, and clubs. Thank you for the help

  Read the article

• Create pdf from inDesign at runtime...

  - by Lieven Cardoen

  For a project I need to automate creation of business cards. Now, they have a InDesign file for each business card template. They insert the info of alle the people in the indesign file and then generate a pdf of it. Now, entering the information of customers in a web application is no problem, but how will I generate a pdf and how will I alter the indesign file at runtime? I think that altering the indesign file will be not possible programmatically? Could I generate a pdf from the indesign with one card template in it. At runtime I would copy the card in the pdf x number of times. Then I would need to inject the information of the people (name, address, ...)? What's possible here? The final pdf is used by a machine that automatically creates the business cards, cuts them, ...

  Read the article

• Python Solitaire

  - by Kevin

  This is more of a thought i had awhile rather than an actual problem to solve, maybe more a discussion, but i was wondering if it would be possible to design the game of solitaire and be abkle to play it in the python GUI or some other form of iterface? I know you can get a deck of cards fairly easily and i know yuo can play simple games like snap and so on but i thought solitaire would be more challenging and fun because there is alot more logic behind it than just laying out the cards randomly. Any ideas? (I would be intrested to hear about or see any solutions if anyone had any links etc..)

  Read the article

• jQuery UI: Drag and clone from original div, but keep clones

  - by Nic Hubbard

  I have a div, which has jQuery UI Draggable applied. What I want to do, is click and drag that, and create a clone that is kept in the dom and not removed when dropped. Think of a deck of cards, my box element is the deck, and I want to pull cards/divs off that deck and have them laying around my page, but they would be clones of the original div. I just want to make sure that you cannot create another clone of one of the cloned divs. I have used the following, which didn't work like I wanted: $(".box").draggable({ axis: 'y', containment: 'html', start: function(event, ui) { $(this).clone().appendTo('body'); } });

  Read the article

• Looking for some thoughts on an image printing app

  - by Alex

  Hey All, Im looking for thoughts/advice. I have an upcoming project (all .net) that will require the following: pulls data once a day from an online service provider based on certain criteria. saves data locally for reference and reporting the data thats pulled will be used to create gift cards. So after the data is loaded, a process will run to generate "virtual cards" and send them to a network printer. Once printed, the system will updated the local data recording a successful or failed print. My initial thought was to create a windows service to pull the data...but then I couldnt decide how I was going to put a "virtual card" together and get it to print. Then I considered doing it as a WPF app. I figure that will give me access to the graphics and printing ability. Maybe neither of these are the right direction....Any ideas or thoughts would be greatly appreciated. Alex

  Read the article

• Optimal method to create a large string containing several variables?

  - by Runcible

  I want to create a string that contains many variables: std::string name1 = "Frank"; std::string name2 = "Joe"; std::string name3 = "Nancy"; std::string name4 = "Sherlock"; std::string sentence; sentence = name1 + " and " + name2 + " sat down with " + name3; sentence += " to play cards, while " + name4 + " played the violin."; This should produce a sentence that reads Frank and Joe sat down with Nancy to play cards, while Sherlock played the violin. My question is: What is the optimal way to accomplish this? I am concerned that constantly using the + operator is ineffecient. Is there a better way?

  Read the article

• Magento: How do I retrieve values from fields submitted with the payment method?

  - by Joseph

  Ok. This is getting a little frustrating. I am trying to create a custom payment module for Magento. The purpose is to use Authorize.net's CIM so that we don't have to worry so much about PCI compliance. The issue I am having is that the users need to be able to access their previous credit cards and use those for purchasing. I have the previous cards being stored in the database. They are also being displayed in the form in the checkout process. My issue comes when I click continue after selecting the payment method. How do I get the values I submitted in the form? Specifically, the value of the radio button the saved code is attached to? I am not sure what if any code is needed for me to post, so let me know if you need anything in particular. Thanks.

  Read the article

• How to read a technical book to remember most of it?

  - by LikeToCode

  There are many technical books that become thinker and thicker and the pressure from the technical society is more and more to read them and remember many concepts described in them. But it's so hard to do it. I have only a few hour a week to read them and when I reach the middle of the book I forgot most of what I've read at the beginning, because lots of time passed. If I go back, I'll just re-read the same stuff over and over, never going past 50% of the book. So, even after I finished reading a thick tech book I forgot most of it. How do you remember all that stuff? I had a talk in my University on how to do it. They advised to use some cards with basic info so that you can remember the details when you look at it. Do you use such cards or do you have other ideas how to do it?

  Read the article

• Motherboard memory question

  - by JERiv

  I am currently drawing up specs on a new workstation for my office. I am considering the Asus P6X58D for a motherboard. This board's specs list it as supporting 24 gigs of memory. Suppose I were to use six four gig memory cards and then two video cards with 1 gig of memory apiece. Is the maximum supported memory similar to how 32 bit operating systems only have enough address space for 4 gigs of memory? Simply: Will the board post? If so, will the system be able to address all the memory, both the 24 gigs on the ddr3 bus and the 3 gigs on the graphics card?

  Read the article

• Should I skip authorization, with CanCan, of an action that instantiates a resource?

  - by irkenInvader

  I am writing a web app to pick random lists of cards from larger, complete sets of cards. I have a Card model and a CardSet model. Both models have a full RESTful set of 7 actions (:index, :new, :show, etc). The CardSetsController has an extra action for creating random sets: :random. # app/models/card_set.rb class CardSet < ActiveRecord::Base belongs_to :creator, :class_name => "User" has_many :memberships has_many :cards, :through => :memberships # app/models/card.rb class Card < ActiveRecord::Base belongs_to :creator, :class_name => "User" has_many :memberships has_many :card_sets, :through => :memberships I have added Devise for authentication and CanCan for authorizations. I have users with an 'editor' role. Editors are allowed to create new CardSets. Guest users (Users who have not logged in) can only use the :index and :show actions. These authorizations are working as designed. Editors can currently use both the :random and the :new actions without any problems. Guest users, as expected, cannot. # app/controllers/card_sets_controller.rb class CardSetsController < ApplicationController before_filter :authenticate_user!, :except => [:show, :index] load_and_authorize_resource I want to allow guest users to use the :random action, but not the :new action. In other words, they can see new random sets, but not save them. The "Save" button on the :random action's view is hidden (as designed) from the guest users. The problem is, the first thing the :random action does is build a new instance of the CardSet model to fill out the view. When cancan tries to load_and_authorize_resource a new CardSet, it throws a CanCan::AccessDenied exception. Therefore, the view never loads and the guest user is served a "You need to sign in or sign up before continuing" message. # app/controllers/card_sets_controllers.rb def random @card_set = CardSet.new( :name => "New Set of 10", :set_type => "Set of 10" ) I realize that I can tell load_and_authorize_resource to skip the :random action by passing :except => :random to the call, but that just feels "wrong" for some reason. What's the "right" way to do this? Should I create the new random set without instantiating a new CardSet? Should I go ahead and add the exception?

  Read the article

• What happens to a class in PHP once its been instantiated?

  - by Caylem

  Hi I'm just playing around with some PHP and was wondering what happens when an object from a class is created within another PHP script? I assume once its created and been processed their is no way of then going back and 'playing' around with it from another script? The idea is i'm trying to create a kind of deck of cards using a card class, each card has specific data that is added to each individual object to make it unique, suit, value etc. Once its created i need to be able to go back to specific cards to use them. In java i'd have an arraylist of card objects, i'm not sure how to approach the same area in PHP. Thanks.

  Read the article

• Draw rectangle-like objects on a bitmap

  - by _simon_

  I am performing OCR (optical character recognition) on a bunch of images. Images are grouped into different projects (tickets, credit cards, insurance cards etc). Each image represents an actual product (for instance, if we have images of credit cards, picture1.jpg is image of my credit card, picture2.jpg is image of your credit card,... you get it). I have a settings.xml file, which contains regions of the image, where OCR should be performed. Example: <Project Name="Ticket1" TemplateImage="...somePath/templateTicket1.jpg"> <Region Name="Prefix" NumericOnly="false" Rotate="0"> <x>470</x> <y>395</y> <width>31</width> <height>36</height> </Region> <Region Name="Num1" NumericOnly="true" Rotate="0"> <x>555</x> <y>402</y> <width>123</width> <height>35</height> </Region> </Project> </Project Name="CreditCard" TemplateImage="...somePath/templateCreditCard1.jpg"> <Region Name="SerialNumber" NumericOnly="false" Rotate="90"> <x>332</x> <y>12</y> <width>20</width> <height>98</height> </Project> I would like to set these parameters through GUI (now I just write them into xml file). So, first I load a template image for a project (an empty credit card). Then I would like to draw a rectangle around a text, where OCR should be performed. I guess this isn't hard, but it would be great if I could also move and resize this rectangle object in the picture. I have to display all regions (rectangles) on the picture also. Also - there will probably be a list of regions in a listview, so when you click a region in this listview, it should mark it on the picture in a green color for example. Do you know for a library, which I could use? Or a link with some tips how to create such objects?

  Read the article

• Online payment service recommendation?

  - by Shadowman

  We're currently in the process of looking for an online payment service that will allow us to accept credit cards, etc. However, our business model also involves revenue sharing in a model similar to that of iTunes. That is, content creators will be able to sell content through our site and we take a small percentage of the revenue. Can anyone recommend an online payment service that supports this model? We're also interested in: Accept all major credit cards Being able to do international transactions in the appropriate local currency Recurring transactions (monthly, yearly, etc.) Additionally, if the service provided a Java API for integration or the ability to broker PayPal transactions that would be an added bonus. I know Amazon provides a hosted payment service, but I'd prefer not to require all of our customers to have an Amazon account. That provides an additional barrier to entry that we'd prefer to avoid. I'd appreciate any recommendations you can provide!

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >