Search Results

Search found 1516 results on 61 pages for 'cards'.

Page 23/61 | < Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >

• Updating ASUS BIOS on Windows 7 64bit

  - by joesavage

  I've recently decided that I want to try and utilize my two graphics cards so that I can have a dual monitor setup. Unfortunately Windows only seems to notice my most recent graphics card installation - and so I've been told that I should look into my BIOS and try to enable two graphics cards. I could not find this setting anywhere in my M2N68-AM Plus v0210 BIOS. After some further research I figured that I should perhaps upgrade my BIOS, so I searched and managed to download the latest version (v1804) as a ROM file. However I am having difficulty figuring out how to install it. I've tried using the Asus EZFlash feature built into my BIOS, but when trying to load up a variety of different ROMs that are for my motherboard/BIOS I get the error: Boot block in file is not valid! I'm not totally sure what I should do to fix this, so I'm looking into other methods of upgrading my BIOS - however I can't really find any solutions that seem to work. Asus Update is for 32-bit only, AFUDOS doesn't appear to work on my Windows 7 64-bit system (I think it's supposed to run in DOS or something - but that just sounds confusing since I know nothing about DOS). Could anybody help me with this?

  Read the article

• Problems reviving old pc including graphics card issue.

  - by Mick

  I have a PC that seemed to have died years ago that I am trying to revive. It has a dual core athlon processor and a gigabyte motherboard. It had two dual output graphics cards, and I have long since forgotten which output would print out the diagnostic information as the PC starts up. Also I suspect that the resolution set on all the monitors was probably higher than my current single monitor is capable of displaying. The motherboard also has a built in graphics card, so I thought it may be simplest to remove both the graphics cards and plug my monitor into the onboard graphics just while I get things going. Does that seem sensible? Now the other problem: The PC has two hard drives. I have no idea which one is the primary one it is attempting to boot from. When I power up, the fan comes on and I hear some chuga-chuga-pause chuga-chuga-pause repeat indefinitely. I'm not sure which device is making the noise. There are no-beeps at any time. I see nothing on the screen at any time, not even for a second. Any suggestions? EDIT: If T start up the PC without the power connected to the CDrom there is no chuga-chugan noise.

  Read the article

• quad sli with gtx 690 not working

  - by Moaadh

  I have two cards GTX 690 (dual core). I did the Sli successfully. Nvidia control panel acknowledges the two cards as quad Sli. However, the problem is that Windows 7 64-bit Ultimate is showing me the graph memory size as 4 GB while it is supposed to be 8 GB because of the Sli. Also the benchmark from all software is giving me a very low score compared to some other guy's benchmark on YouTube. It gives me a big headache. Does anyone know why this is happening? If so, how can I get Windows 7 to recognize all 8 GB of memory? Thanks for your help in advance. My computer specifications: (Processor: Intel Core i7-3930k @3.2GHz(12CPUs))--- (Memory: 65536 MB Ram 1866 MHz)-- (OS: Windows 7 Ultimate 64-bit)-- (OCZ 240GB as SSD PCIe drive for booting and storage disk)-- (DirextX version: DirectX 11)-- (VGA Card: 2 X EVGA GTX 690 Dual GPU. Each GPU is 2 GB, so total memory should be 8 GB.)-- (MotherBoard: ASUS Rampage IV Extreme)-- Others with lesser specifications get a 2500 score in heaven benchmark while I get 1501 as if it is one card.

  Read the article

• securing communication between 2 Linux servers on local network for ports only they need access to

  - by gkdsp

  I have two Linux servers connected to each other via a cross-connect cable, forming a local network. One of the servers presents a DMZ for the other server (e.g. database server) that must be very secure. I'm restricting this question to communication between the two servers for ports that only need to be available to these servers (and no one else). Thus, communication between the two servers can be established by: (1) opening the required port(s) on both servers, and authenticating according to the applications' rules. (2) disabling IP Tables associated with the NIC cards the cross-connect cable is attached to (on both servers). Which method is more secure? In the first case, the needed ports are open to the external world, but protected by user name and password. In the second case, none of the needed ports are open to the outside world, but since the IP Tables are disabled for the NIC cards associated with the cross-connect cables, essentially all of the ports may be considered to be "open" between the two servers (and so if the server creating the DMZ is compromized, the hacker on the DMZ server could view all ports open using the cross-connect cable). Any conventional wisdom how to make the communication secure between two servers for ports only these servers need access to?

  Read the article

• Having an issue trying to get Gigabit speed across my network (Ubuntu Server)

  - by user94217

  I've just started looking into the network speeds at my office, the entire network is setup to be "Gigabit". This includes Gb switches, Gb Network cards and Cat 5e cabling. I'm not expecting the full speed, I just want more than ~90 Mb/s. I've been running some tests with iperf the linux tools and checking the hardware with ethtool. I have 3 servers and when doing my checks/test I discovered that the two backup servers can access each other at around 450 Mb/s but when using either one of them to connect and test the main server, I only get the 90Mb/s even though ethtool shows the networking card running at 1000/Full. The only difference between all the server/networking cards is the "Port" which ethtool shows. On the two backup servers the "Port" is shown as MII yet on the other it's shown as "Twisted Pair". When using ethtool -s to manually set the "Port" to MII on the main server, it looses all connectivity and does not show "Speed" or "Duplex". Anyway, Am i doing something wrong? Is there a specific reason my main server cannot use Gb when there appears to be no difference except the "Port"?

  Read the article

• ubuntu 12.04 kvm virtual server network setup, can't get the machine to be connectable

  - by xyious

  I have worked on my Ubuntu Server host for weeks now and I just can not manage to get the virtual machines into the network.... here's what I need to do: I need to be able to create virtual machines that have IP addresses that can be reached from the outside (192.168 network). I need to be able to connect to the virtual machines through ssh, ftp, http and preferably https, anything else doesn't matter that much. So far everything seems simple enough and I have a lot of leeway in terms of IP address range and server/client configuration. I have the option of taking part of a /24 net as most IPs aren't used, and if it's absolutely necessary I have the option of creating a new /24 subnet. Also have the option of reformatting and reinstalling OS on the host and recreating the virtual machines as nothing has been done other than trying to get virtual machines to work. I would prefer if the virtual machines were just part of the normal network which would be 192.168.5.0/24. The host machine has 2 network cards so I don't even necessarily need the Host to be connectable in the same /24 network. I have tried (I think) just about everything from about 5 different tutorials on bridging (giving br0 the same IP that eth0 used to have (Host is able to connect to VM and vice versa, VM doesn't have outside network access), having eth0 set up like it always was and having br0 have a different IP (same as above), NAT with port forwarding (which I would have preferred not to use but will if it works), turning off one of the hosts network cards and just using one of them, different subnets.... etc. I do know my way around iptables fairly well.... Host is 64bit Ubuntu Server 12.04, using libvirt/kvm. edits: Local network is 192.168.5.0/24, host has static ip 192.168.5.254, GW .5.1 which is also nameserver. We have a second Local network at 192.168.10.0/24 with .10.1 GW, but both hosts and VMs were supposed to go into the .5 subnet. The .10 subnet isn't required, but it wouldn't be horrible if the Host were only accessible in the .10 subnet.

  Read the article

• CodePlex Daily Summary for Friday, June 07, 2013

  CodePlex Daily Summary for Friday, June 07, 2013Popular ReleasesASP.NET MVC Forum: MVCForum v1.3.5: This is a bug release version, with a couple of small usability features and UI changes. All the small amount of bugs reported in v1.3 have been fixed, no upgrade needed just overwrite the files and everything should just work.Json.NET: Json.NET 5.0 Release 6: New feature - Added serialized/deserialized JSON to verbose tracing New feature - Added support for using type name handling with ISerializable content Fix - Fixed not using default serializer settings with primitive values and JToken.ToObject Fix - Fixed error writing BigIntegers with JsonWriter.WriteToken Fix - Fixed serializing and deserializing flag enums with EnumMember attribute Fix - Fixed error deserializing interfaces with a valid type converter Fix - Fixed error deser...Christoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.3 for VS2012: V2.3 - Release Date 6/5/2013 Items addressed in this 2.3 release Fixed bad namespace for BusinessController in one of the C# templates. Updated documentation in all templates. Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesPulse: Pulse 0.6.7.0: A number of small bug fixes to stabilize the previous Beta. Sorry about the never ending "New Version" bug!ZXMAK2: Version 2.7.5.3: - debugger: add LPC indicator (last executed opcode pc) - add host joystick support (written by Eltaron) - change file extension for CMOS PENTEVO to "cmos" - add hardware value monitor (see Memory Map for PENTEVO/ATM/PROFI)QlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...BlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.93: Added -esc:BOOL switch (CodeSettings.AlwaysEscapeNonAscii property) to always force non-ASCII character (ch > 0x7f) to be escaped as the JavaScript \uXXXX sequence. This switch should be used if creating a Symbol Map and outputting the result to the a text encoding other than UTF-8 or UTF-16 (ASCII, for instance). Fixed a bug where a complex comma operation is the operand of a return statement, and it was looking at the wrong variable for possible optimization of = to just .VG-Ripper & PG-Ripper: VG-Ripper 2.9.42: changes NEW: Added Support for "GatASexyCity.com" links NEW: Added Support for "ImgCloud.co" links NEW: Added Support for "ImGirl.info" links NEW: Added Support for "SexyImg.com" links FIXED: "ImageBam.com" linksDocument.Editor: 2013.22: What's new for Document.Editor 2013.22: Improved Bullet List support Improved Number List support Minor Bug Fix's, improvements and speed upsCarrotCake, an ASP.Net WebForms CMS: Binaries and PDFs - Zip Archive (v. 4.3 20130528): Features include a content management system and a robust featured blogging engine. This includes configurable date based blog post URLs, blog post content association with categories and tags, assignment/customization of category and tag URL patterns, simple blog post feedback collection and review, blog post pagination/indexes, designation of default blog page (required to make search, category links, or tag links function), URL date formatting patterns, RSS feed support for posts and pages...PHPExcel: PHPExcel 1.7.9: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated.Droid Explorer: Droid Explorer 0.8.8.10 Beta: Fixed issue with some people having a folder called "android-4.2.2" in their build-tools path. - 16223 Magick.NET: Magick.NET 6.8.5.402: Magick.NET compiled against ImageMagick 6.8.5.4. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/patterns & practices: Data Access Guidance: Data Access Guidance Drop3 2013.05.31: Drop 3DotNet.Highcharts: DotNet.Highcharts 2.0 with Examples: DotNet.Highcharts 2.0 Tested and adapted to the latest version of Highcharts 3.0.1 Added new chart types: Arearange, Areasplinerange, Columnrange, Gauge, Boxplot, Waterfall, Funnel and Bubble Added new type PercentageOrPixel which represents value of number or number with percentage. Used for sizes, width, height, length, etc. Removed inheritances in YAxis option classes. Closed issues: 682: Missing property - XAxisPlotLinesLabel.Text 688: backgroundColor and plotBackgroundColor are...New ProjectsAccountingTest: just to learn asp.net mvc 3 Agile Poker Cards for Windows Mobile: During a scrum or other agile processes, you have to estimate the size of a user story during a planning session. With the Agile Poker Cards program there is no need for using real cards anymore!Buildinator: Buildinator generates TFS Build definitions from an XML file, enabling canonical "templates" that make it easy to add or copy build definitions.Clipboard Capture Plugin: Captures an image in the clipboard and gives you more options to insert the image into Live WriterComercial HS: Commercial hsCommonExtranet: CommonExtranet is a basis for an Extranet web site with a user authentication mechanism that incorporates password aging and various features expected on a domain LogOnDataVeryLite: DataVeryLite is a lightweight *Persistence Framework*. DataVeryLite???????*?????*. ??????Nhibernate?????,??Linq to sql???????,?????DataVeryLite.daydayup: snd\realdamon_cpDNN Extension Url Providers: The DNN Extension Url Providers project contains installable extensions for extending DNN URL functionality.DotNetNuke Kitchen Sink: A sample module project for DotNetNuke with a variety of different scenarios covered.Football Team Management: Manage team, player, match and staffFreePiano: Play piano using your computer keyboard.GIF animator: Dev in progessI'm Feeling Lucky Plugin: Lets you put a link in that acts as though doing an I'm Feeling Lucky search.Insert Video Jnr: This is a baby version of my Video plugin, it is intended for Hosted Wordpress blogs only and shouldn't be used with other blog providers.jabbrmercurial: 22Kax.WebControls.RadioButtonList: Web Custom Control that extend RadioButtonList to allow uncheckable state.Kinect Screen Aware: Kinect Screen Aware uses a Kinect to detect touch, hover, gestures, and voice on a standard television display. It's designed to be low cost and easy to setuplppbop: Aplikasi Laporan Bantuan Operasional PendidikanmobiSms: mobismsnga: National Geography of AzerothRadminPassword: ????????? ??? ??????????????? ????? ??????? ? ????????? ????????? ?????????? ?????????? ?? Radmin. A program to automatically enter the passwords in the famous PC remote control software Radmin.Rx Heat: Rx Heat is a library of helper classes that complements the Reactive Extensions Library with additional features. Schema Generator: The basic idea behind this utility is to emit the database schema from an existing SQL Server database. From a developer perspective, it is sometimes very much handy to quickly take a printout of the database structure for creating the UI layout.SharePoint Packager: Perform the instalation, upgrade and retraction of Ms Sharepoint Applications fast, easy and efficientsmartTouch: :-)SpotifyLync: A small tray application that reports your Spotify status to your Microsoft Lync client. Alos contains additional Spotify / Lync features.Syngine: A simple to use game framework using MonoGame and Farseer Physicstest060601CM: testtestMC053003: testToSic.Eav: A powerfull EAV (Entity-Attribute-Value) system created by 2sic Internet Solutions in Switzerland. It's currently mainly used inside 2SexyContent for DotNetNukeTraceLight: <project name> TraceLight ray tracer </project name> <programming language> C# </programming language>trakr: minimalist webtracking software written in python and twistedTwitterXML: A .NET wrapper library for the Twitter REST API. Currently, all of the methods return an XMLDocument. Also included are classes for Users, Statuses, and Direct Messages that use XML serialization for converting the XML responses to objects with a Deserialize() call.Universal Parking Centre: Universal Parking Centre is a website-based software developed by Center Code to help you in organizing your parking business.Velocity OS: Be fast, Be strong. It's Velocity.WinKeGen Code Samples: This project will allow beginning developers a close look at some code samples and variations of how to use those samples in their own code.WinRT Synth lib: Project Description this project aims to provide an easy-to-use API, for sound synthesis under winrt, in c#. It use the XAudio2 api for the playback of the sounWpfCollaborative3D: WpfCollaborative3DX-Parking: Our online parking sites , try at : x-parking.pemrogramaninternet.infoYnote Plugins: Ynote Classic Plugins which help in transforming Ynote Classic into a powerful HTML / XML Editor or an IDE.

  Read the article

• Longitudinal Redundancy Check fails

  - by PaulH

  I have an application that decodes data from a magnetic stripe reader. But, I'm having difficulty getting my calculated LRC check byte to match the one on the cards. If I were to grab 3 cards each with 3 tracks, I would guess the algorithm below would work on 4 of the 9 tracks in those cards. The algorithm I'm using looks like this (C#): private static char GetLRC(string s, int start, int end) { int result = 0; for (int i = start; i <= end; i++) { result ^= Convert.ToByte(s[i]); } return Convert.ToChar(result); } This is an example of track 3 data that fails the check. On this card, track 2 matched, but track 1 also failed. 0 1 2 3 4 5 6 7 8 9 A B C D E F 00 3 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 10 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 7 20 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 30 8 8 8 9 9 9 9 9 9 9 9 9 9 0 0 0 40 0 0 0 0 0 0 0 1 2 3 4 1 1 1 1 1 50 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 60 3 3 3 3 3 3 3 3 The sector delimiter is ';' and it ends with a '?'. The LRC byte from this track is 0x30. Unfortunately, the algorithm above computes an LRC of 0x00 per the following calculation (apologies for its length. I want to be thorough): 00 ^ 3b = 3b ';' 3b ^ 33 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 34 = 3c 3c ^ 34 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 35 = 3d 3d ^ 35 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 36 = 3e 3e ^ 36 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 37 = 3f 3f ^ 37 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 38 = 30 30 ^ 38 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 39 = 31 31 ^ 39 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 30 = 38 38 ^ 30 = 08 08 ^ 31 = 39 39 ^ 32 = 0b 0b ^ 33 = 38 38 ^ 34 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 31 = 3d 3d ^ 31 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 32 = 3e 3e ^ 32 = 0c 0c ^ 33 = 3f 3f ^ 33 = 0c 0c ^ 33 = 3f 3f ^ 33 = 0c 0c ^ 33 = 3f 3f ^ 33 = 0c 0c ^ 33 = 3f 3f ^ 33 = 0c 0c ^ 33 = 3f 3f ^ 3f = 00 '?' If anybody can point out how to fix my algorithm, I would appreciate it. Thanks, PaulH

  Read the article

• Boost Netbook Speed with an SD Card & ReadyBoost

  - by Matthew Guay

  Looking for a way to increase the performance of your netbook?  Here’s how you can use a standard SD memory card or a USB flash drive to boost performance with ReadyBoost. Most netbooks ship with 1Gb of Ram, and many older netbooks shipped with even less.  Even if you want to add more ram, often they can only be upgraded to a max of 2GB.  With ReadyBoost in Windows 7, it’s easy to boost your system’s performance with flash memory.  If your netbook has an SD card slot, you can insert a memory card into it and just leave it there to always boost your netbook’s memory; otherwise, you can use a standard USB flash drive the same way. Also, you can use ReadyBoost on any desktop or laptop; ones with limited memory will see the most performance increase from using it. Please Note:  ReadyBoost requires at least 256Mb of free space on your flash drive, and also requires minimum read/write speeds.  Most modern memory cards or flash drives meet these requirements, but be aware that an old card may not work with it. Using ReadyBoost Insert an SD card into your card reader, or connect a USB flash drive to a USB port on your computer.  Windows will automatically see if your flash memory is ReadyBoost capable, and if so, you can directly choose to speed up your computer with ReadyBoost. The ReadyBoost settings dialog will open when you select this.  Choose “Use this device” and choose how much space you want ReadyBoost to use. Click Ok, and Windows will setup ReadyBoost and start using it to speed up your computer.  It will automatically use ReadyBoost whenever the card is connected to the computer. When you view your SD card or flash drive in Explorer, you will notice a ReadyBoost file the size you chose before.  This will be deleted when you eject your card or flash drive. If you need to remove your drive to use elsewhere, simply eject as normal. Windows will inform you that the drive is currently being used.  Make sure you have closed any programs or files you had open from the drive, and then press Continue to stop ReadyBoost and eject your drive. If you remove the drive without ejecting it, the ReadyBoost file may still remain on the drive.  You can delete this to save space on the drive, and the cache will be recreated when you use ReadyBoost next time. Conclusion Although ReadyBoost may not make your netbook feel like a Core i7 laptop with 6GB of RAM, it will still help performance and make multitasking even easier.  Also, if you have, say, a memory stick and a flash drive, you can use both of them with ReadyBoost for the maximum benefit.  We have even noticed better battery life when multitasking with ReadyBoost, as it lets you use your hard drive less.  SD cards and thumb drives are relatively cheap today, and many of us have several already, so this is a great way to improve netbook performance cheaply. Similar Articles Productive Geek Tips Speed up Your Windows Vista Computer with ReadyBoostSet the Speed Dial as the Opera Startup PageAsk the Readers: What are Your Computer’s Hardware Specs?Understanding Windows Vista Aero Glass RequirementsReplace Google Chrome’s New Tab Page with Speed Dial TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Recycle ! Find That Elusive Icon with FindIcons Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems

  Read the article

• Unity 3d support for multiple X-screens

  - by stewbond

  I've installed Ubuntu 12.04 this weekend and have had problems getting Unity3d to work with my triple monitor set-up. I've installed the latest nVidia drivers for my 2 nVidia video cards and have used NVIDIA X Server Settings to configure everything. If I stick each monitor on a separate X screen, all but the primary X screen will appear white and the cursor will be a black X. I can start a terminal on this screen but cannot drag other windows to it. If I kill the "Nautilus" process, the white background disappears and I see my desktop background, but my cursor is still an X and I still cannot drag windows to it. If I enable TwinView, I can get one screen on two monitors to work properly, but the white screen remains on my third monitor. In addition, I don't like using TwinView because my full-screen applications get stretched. My current solution is to "Enable Xinerama", use all separate X screens and revert to Unity2d. I'd love a solution to this as Ubuntu 12.10 is not planned to support Unity-2d and prefer the aesthetics of 3d anyways. I can provide Xorg.conf for all configurations and any other suggested diagnostic information. Below is my closest-to-working xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" RightOf "Screen2" Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Microvitec PLC MV191" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "Microvitec PLC MV191" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Unknown" ModelName "Microvitec PLC MV191" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTS 450" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9500 GT" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTS 450" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device3" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTS 450" BusID "PCI:1:0:0" Screen 2 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-2: 1280x1024_75 +0+0; DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Device3" Monitor "Monitor3" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Other people have had similar issues. I haven't been successful at any of the few suggestions submitted. Can not get Dual Monitors to work on Different GPUs http://askubuntu.com/questions/30412/3-monitors-with-2-video-cards-not-working?rq=1 How to get second display to work alongside primary display? http://askubuntu.com/questions/148007/multiple-monitors-only-work-with-unity-2d/201086#201086 xorg.conf and Unity3D?

  Read the article

• 2013 Predictions for Retail

  - by David Dorf

  Its that time of year to roll out the predictions for next year.  I can't say I've really nailed it in the past, but feel free to look back at my 2012, 2011, and 2010 predictions.  I'm not expecting anything earth-shattering this year; just continued maturation of several technologies that are finally taking hold. 1. Next day delivery -- Amazon finally decided it wasn't worth fighting state taxes and instead decided to place distribution centers everywhere so they can potentially offer next-day deliveries.  Not to be outdone, Walmart is looking to leverage its huge physical presence to offer the same.  Clubs like ShopRunner are pushing delivery barriers as well, so the norm is shifting to free shipping in a few days or relatively cheap shipping overnight.  Retailers need be thinking about how to ship from physical stores. 2. Bring your own device -- Earlier this year Intuit bought AisleBuyer, a mobile self-checkout start-up, at least somewhat validating the BYOD approach.  Grocery stores, especially in Europe, have been supporting in-aisle self-scanning for a while and I'm betting it will find a home in certain verticals in the US too.  There's also the BYOD concept for employees.  Some retailers are considering issuing mobile devices at hiring along side the shirt and name-tag.  Employees become responsible for the hardware until they leave. 3. TV shopping -- Will Apple finally release a TV product in 2013?  Who knows?  But the industry isn't standing still. Companies like QVC and HSN are already successfully combining the TV and online experiences for shopping.  Comcast is partnering with Tivo to allow viewers to interact with ads with Paypal handing payment.  This will be a slow maturation, but expect TVs to get smarter and eventually become a new selling channel (pun intended) for retailers. 4. Privacy backlash -- It only takes one big incident to stir the public, and I'm betting we have one in 2013.  Facebook, Google, or Apple will test the boundaries of what the public is willing to accept.  It could involve a retailer using geo-location technology, or possibly video analytics.  And as is always the case, the offender will apologize, temporarily remove the technology, and wait 2-3 years for it to be generally accepted.  Privacy is a moving target. 5. More NFC -- I've come to the conclusion that adoption of any banking technology is going to be slow.  It was slow for credit cards, ATMs, and online billpay so why should it be any different for NFC?  Maybe, just maybe the iPhone 5S will have an NFC chip, but we're not going to see mainstream uptake for years.  Next year we'll continue to see incremental improvements from Isis, Google, and Paypal and a plethora of new startups, but don't toss your magstripe cards just yet. 6. In-store location -- The technologies for tracking people inside stores is really improving.  Retailers can track people using video cameras, infrared, and by the WiFi radios in mobile phones.  We're getting closer to the point where accuracy could be a shelf-facing, which will help retailers understand how people shop, where they spend time, and what displays attract them.  Expect CPG companies to get involved and partner with retailers, since the data benefits both parties.  Consumers will benefit by being directed right to the products they seek.  (In 2013 ARTS is forming a workteam to develop new standards in this area.) 7. M&A -- Looking back at 2012 there were some really big deals involving IBM, Oracle, JDA, and NCR and I expect that trend will likely continue as vendors add assets to bolster their portfolios.  Many retailers are due for an IT transformation to support anywhere, anytime shoppers, and one-stop-vendors can minimize complexity and costs. Predictions from other sources: Independent Retailer Stores Magazine IDC Insights Mobile Commerce Daily

  Read the article

• Why does Ubuntu only detect one USB LAN adapters at a time?

  - by EGO

  I try to connect real switch with my computer for an exam preparation, for this purpose I need more than one LAN cards, and there is only one built in LAN card in my computer. So, to get more LAN cards, I bought 4 USB Ethernet adapters (as I have 4 usb ports in may laptop 2 usb 2.0 ports, 2 usb 3.0 ports). When I plug these adapters in my computer Ubuntu only detects one LAN card from 2.0 usb ports, and one LAN card from 3.0 ports. And sometimes detects only one USB LAN from all the usb ports. Actually the real problem is Ubuntu shows these USB LAN adapters in the "lsusb", but does not list them in "ifconfig". Kontron (Industrial Computer Source / ICS Advent) is my LAN USB ethernet. abc@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 001 Device 003: ID 138a:0018 Validity Sensors, Inc. Bus 001 Device 004: ID 064e:e258 Suyin Corp. Bus 003 Device 011: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 013: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 003 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 005: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR -- etho is my built in LAN card, while eth1 is the only USB LAN card that ubuntu has detected. abc@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 2c:27:d7:a5:d2:39 inet6 addr: fe80::2e27:d7ff:fea5:d239/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:21056 errors:0 dropped:1 overruns:0 frame:0 TX packets:5669 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1407289 (1.4 MB) TX bytes:372566 (372.5 KB) Interrupt:49 Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:e0:4c:53:44:58 inet6 addr: fe80::2e0:4cff:fe53:4458/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9230 errors:0 dropped:0 overruns:0 frame:0 TX packets:9230 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:557648 (557.6 KB) TX bytes:557648 (557.6 KB) wlan0 Link encap:Ethernet HWaddr cc:52:af:5e:78:05 inet addr:192.168.1.65 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::ce52:afff:fe5e:7805/64 Scope:LinkU UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17389 errors:0 dropped:0 overruns:0 frame:0 TX packets:12231 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22452248 (22.4 MB) TX bytes:1502750 (1.5 MB) If I unplug the USB LAN card which Ubuntu has detected, then Ubuntu will detect a USB LAN card from the remaining plugged adapters, and process go on untill I plug all the USB LAN adapters. Looking for some urgent help. Thanks

  Read the article

• History of Mobile Technology

  - by David Dorf

  Over the last ten years, mobile phones have gone through several incremental technology leaps that have added capabilities that impact the retail industry.  I've listed the six major ones below, along with their long-lasting impact. 1. Location In the US, the FCC required mobile phones to implement E911 (emergency calls) by 2006, requiring the caller to be located to within 300 meters.  Back in 2000, GPS was opened up for civilian use, and by 2004 Qualcomm had figured out how to use GPS in mobile phones.  So mobile operators moved from cell tower triangulation to GPS, principally for E911.  But then lots of other uses became apparent, especially navigation.  The earliest mobile apps from retailers made it easy to find nearby stores, and companies are looking at ways to use WiFi triangulation inside stores. 2. Computer Vision In 1997 Philippe Kahn shared a photo of his newborn using a mobile phone thus launching the popularity of instant visual communications.  Over the years the quality of the cameras got better, reaching the point where barcodes could be read around 2008.  That's when Occipital came on the scene with their Red Laser application, which was eventually acquired by eBay.  This opened up the ability for consumers to easily price compare inside stores.  Other interesting apps included Tesco's Wine Finder and Amazon's Price Checker, both allowing products to be identified by picture. 3. Augmented Reality Once the mobile phone had GPS, a video camera, and compass functionality it was suddenly possible to overlay digital information on the screen in real-time.  Yelp, which was using GPS to find nearby merchants, created a backdoor called Monocle on the iPhone that showed nearby merchants overlayed on the video camera view.  Today AR apps are mostly used by retailers for marketing, like Moosejaw's app that undresses models in their catalog. 4. Geo-Fencing So if we're able to track the location of a mobile phone, why not use that context to offer timely information?  My first experience with geo-fencing came courtesy of North Face, the outdoor enthusiast store. When a mobile phone enters a predetermined area, like near a store, a text message is sent to phone with an offer or useful information.  Of course retailers can geo-fence their competitors as well and find out which customers are aren't so loyal. 5. Digital Wallet Mobile payments leverage different technologies such as NFC, QRCodes, bluetooth, and SMS to facilitate communication between the consumers's phone and the retailer's point-of-sale. The key here is the potential to consolidate loyalty cards, coupons, and bank cards into the mobile phone and enable faster checkout.  Nobody does this better than Starbucks today, but McDonald's and Duncan Donuts aren't far behind.  Google, Isis, Paypal, Square, and MCX are all vying for leadership in this area.  If NFC does finally take off, it will be leveraged by retailers in more places than just the POS. 6. Voice Response Mobile Phones have had the ability to interpret simple voice commands for a while, but Google and Amazon were the first to use voice to allow searches for products.  Allowing searches by text, barcode, and voice makes it easy to comparison shop in the aisles.  Walmart even uses voice to build shopping lists, and if the Siri API is even opened we could see lots more innovation in this area.

  Read the article

• PayPal: IPN vs PDT

  - by Tom

  Hi, I'm having some trouble choosing between PayPal's Instant Payment Notification (IPN) and Payment Data Transfer (PDT). Basically, users buy a one-off product on my site, pay on PayPal, and return to my site. I understand how IPN works but I'm now seeing that I might be able to trigger the various actions that take place after a successful purchase more easily with PDT, as the data gets returned there and then (as opposed to needing a separate listener). However, PayPal's PDT documentation contains this cryptic line: "PDT is not meant to be used with credit card or Express Checkout transactions." ... but I can't find anything further whatsoever on the topic. (1) Are credit cards REALLY not meant to be used with PDT? I would like more than a sentence. (2) Does that mean that a user must have/create a PayPal account to pay? (3) Does it mean that if I want to allow users to pay with their PayPal accounts AND/OR with credit cards directly, I must implement IPN? Could anyone who's gone through this kindly shed some light? Thank you.

  Read the article

• Programming Technique: How to create a simple card game

  - by Shyam

  Hi, As I am learning the Ruby language, I am getting closer to actual programming. So I was thinking of creating a simple card game. My question isn't Ruby orientated, but I do know want to learn how to solve this problem with a genuine OOP approach. In my card game I want to have four players. Using a standard deck with 52 cards, no jokers/wildcards. In the game I won't use the Ace as a dual card, it is always the highest card. So, the programming problems I wonder about are the following: How can I sort/randomize the deck of cards? There are four types, each having 13 values. Eventually there can be only unique values, so picking random values could generate duplicates. How can I implement a simple AI? As there are tons of card games, someone would have figured this part out already, so references would be great. I am a truly Ruby nuby, and my goal here is to learn to solve problems, so pseudo code would be great, just to understand how to solve the problem programmatically. I apologize for my grammar and writing style if it's unclear, for it is not my native language. Also pointers to sites where such challenges are explained, would be a great resource! Thank you for your comments, answers and feedback!

  Read the article

• Memory Leak question

  - by franz

  I am having a memory leak issue with the following code. As much as I can tell I don't see why the problem persists but it still does not release when called. I am detecting the problem in instruments and the following code is keeping its "cards" classes alive even when it should had released them. Any help welcome. ... ... -(id)initDeckWithCardsPicked: (NSMutableArray*)cardsPicked andColors:(NSMutableArray*)cardColors { self = [self init]; if (self != nil) { int count = [cardsPicked count]; for (int i=0; i<count; i++) { int cardNum = [[cardsPicked objectAtIndex:i] integerValue]; Card * card = [[MemoryCard alloc] initWithSerialNumber:cardNum position: CGPointZero color:[cardColors objectAtIndex:i]]; [_cards addObject: card]; [card release]; } } return self; } - (id) init { self = [super init]; if (self != nil) { self.bounds = (CGRect){{0,0},[Card cardSize]}; self.cornerRadius = 8; self.backgroundColor = kAlmostInvisibleWhiteColor; self.borderColor = kHighlightColor; self.cards = [NSMutableArray array]; } return self; } ... ...

  Read the article

• Flash CS4 [AS3]: Playing Card Deck Array

  - by Ben

  I am looking to make a card game in Flash CS4 using AS3 and I am stuck on the very first step. I have created graphics for a standard 52 card deck of playing cards and imported them into the library in Flash and then proceeded to convert them all to Movie Clips. I have also used the linkage to make them available in the code. The movie clips and the linkage are named in sequence, as in the Ace of Clubs would be C1, two of Diamonds is called D2, Jack of Spades is S11. (C = Clubs, D = Diamonds, S = Spades, H = Hearts and numbers 1 through 13 are the card values. 1 being Ace, 11 being Jack, 12 being Queen, 13 being King). As far as I know my next step would be to arrange the cards into an array. This is the part that I am having problems with. Can someone please point me in the right direction, what would be the best way to do this. Could you provide me with a bit of sample code as well? I have had a look at few tutorials online but they are all telling me different things, some are incomplete and the rest...well...they're just cr*ppy. Thanks in advance! Ben

  Read the article

• Detecting an online poker cheat

  - by Tom Gullen

  It recently emerged on a large poker site that some players were possibly able to see all opponents cards as they played through exploiting a security vulnerability that was discovered. A naïve cheater would win at an incredibly fast rate, and these cheats are caught very quickly usually, and if not caught quickly they are easy to detect through a quick scan through their hand histories. The more difficult problem occurs when the cheater exhibits intelligence, bluffing in spots they are bound to be called in, calling river bets with the worst hands, the basic premise is that they lose pots on purpose to disguise their ability to see other players cards, and they win at a reasonably realistic rate. Given: A data set of millions of verified and complete information hand histories Theoretical unlimited computer power Assume the game No Limit Hold'em, although suggestions on Omaha or limit poker may be beneficial How could we reasonably accurately classify these cheaters? The original 2+2 thread appeals for ideas, and I thought that the SO community might have some useful suggestions. It's an interesting problem also because it is current, and has real application in bettering the world if someone finds a creative solution, as there is a good chance genuine players will have funds refunded to them when identified cheaters are discovered.

  Read the article

• Driver denied access to PCI card

  - by Corin

  We wrote a Windows device driver to access our custom PCI card. The driver uses CreateFile to get a handle to the card. We recently had trouble at one installation were the card appeared to stop working. We tried replacing the card (the replacement appeared not work either). The computer vendor replaced the motherboard and both cards still failed to work. We put the cards in a different computer and both worked fine. We now have the computer at our office for examination. The Windows Device Manager lists our card in Other Devices as usual and says it's working fine. However, our driver initialization fails when it attempts to connect to the card. We created a test version of our driver with some extra debugging and determined that CreateFile is failing. It returns INVALID_HANDLE_VALUE as it is supposed to on failure. GetLastError indicates the error is Access is Denied. Since we're logged into the system as a local administrator, what can deny access to the device?

  Read the article

• How to use a class's type as the type argument for an inherited collection property in C#

  - by Edelweiss Peimann

  I am trying to create a representation of various types of card that inherit from a generic card class and which all contain references to their owning decks. I tried re-declaring them, as suggested here, but it still won't convert to the specific card type. The code I currently have is as such: public class Deck<T> : List<T> where T : Card { void Shuffle() { throw new NotImplementedException("Shuffle not yet implemented."); } } public class Card { public Deck<Card> OwningDeck { get; set; } } public class FooCard : Card { public Deck<FooCard> OwningDeck { get { return (Deck<FooCard>)base.OwningDeck; } set { OwningDeck = value; } } } The compile-time error I am getting: Error 2 Cannot convert type 'Game.Cards.Deck' to 'Game.Cards.Deck' And a warning suggesting I use a new operator to specify that the hiding is intentional. Would doing so be a violation of convention? Is there a better way? My question to stackoverflow is this: Can what I am trying to do be done elegantly in the .NET type system? If so, can some examples be provided?

  Read the article

• How can I use TDD to solve a puzzle with an unknown answer?

  - by matthewsteele

  Recently I wrote a Ruby program to determine solutions to a "Scramble Squares" tile puzzle: I used TDD to implement most of it, leading to tests that looked like this: it "has top, bottom, left, right" do c = Cards.new card = c.cards[0] card.top.should == :CT card.bottom.should == :WB card.left.should == :MT card.right.should == :BT end This worked well for the lower-level "helper" methods: identifying the "sides" of a tile, determining if a tile can be validly placed in the grid, etc. But I ran into a problem when coding the actual algorithm to solve the puzzle. Since I didn't know valid possible solutions to the problem, I didn't know how to write a test first. I ended up writing a pretty ugly, untested, algorithm to solve it: def play_game working_states = [] after_1 = step_1 i = 0 after_1.each do |state_1| step_2(state_1).each do |state_2| step_3(state_2).each do |state_3| step_4(state_3).each do |state_4| step_5(state_4).each do |state_5| step_6(state_5).each do |state_6| step_7(state_6).each do |state_7| step_8(state_7).each do |state_8| step_9(state_8).each do |state_9| working_states << state_9[0] end end end end end end end end end So my question is: how do you use TDD to write a method when you don't already know the valid outputs? If you're interested, the code's on GitHub: Tests: https://github.com/mattdsteele/scramblesquares-solver/blob/master/golf-creator-spec.rb Production code: https://github.com/mattdsteele/scramblesquares-solver/blob/master/game.rb

  Read the article

• Game design flaw, need help investigating

  - by Snake

  I am not sure if I will be able to get help here but I would give it a shot. The problem is I dont know where the problem is. I have a cards game, in which when you "human" play by dragging a card, then at the end of card being dragged, a handler using postExecute is called with delay of 0.5 sec to start the next player in turn (which is a bot) The bot chooses the color and plays it and at the end of the animation (the card moving to the middle) a handler is started for the next bot and so on. Once the play reaches again to the human player, it waits for his touchs to drag the crad and start the cycle again. The problem that in production, sometimes I am getting errors. The error is resulting in somehow messing up the sequence which ends up with players having more cards than others. After investigation, I found that the transition from human to bot is the problem. Somehow, the transition is happening twice (meaning handler calling post execute twice and the bot is playing twice and everything is messed up). Its been mutliple months and I can't reproduce it (to fix it) and I cna't figure out why this is happeneing? ANY IDEA how I can go after it? How can I get more info about or how can I solve something like that? any pointer would help me

  Read the article

• CodePlex Daily Summary for Friday, February 11, 2011

  CodePlex Daily Summary for Friday, February 11, 2011Popular ReleasesSnoop, the WPF Spy Utility: Snoop 2.6.1: This release is a bug fixing release. Most importantly, issues have been seen around WPF 4.0 applications not always showing up in the app chooser. Hopefully, they are fixed now. I thought this issue warranted a minor release since more and more people are going WPF 4.0 and I don't want anyone to have any problems. Dan Hanan also contributes again with several usability features. Thanks Dan! Happy Snooping! p.s. By request, I am also attaching a .zip file ... so that people can install it ...RIBA - Rich Internet Business Application for Silverlight: Preview of MVVM Framework Source + Tutorials: This is a first public release of the MVVM Framework which is part of the final RIBA application. The complete RIBA example LOB application has yet to be published. Further Documentation on the MVVM part can be found on the Blog, http://www.SilverlightBlog.Net and in the downloadable source ( mvvm/doc/ ). Please post all issues and suggestions in the issue tracker.SharePoint Learning Kit: 1.5: SharePoint Learning Kit 1.5 has the following new functionality: *Support for SharePoint 2010 *E-Learning Actions can be localised *Two New Document Library Edit Options *Automatically add the Assignment List Web Part to the Web Part Gallery *Various Bug Fixes for the Drop Box There are 2 downloads for this release SLK-1.5-2010.zip for SharePoint 2010 SLK-1.5-2007.zip for SharePoint 2007 (WSS3 & MOSS 2007)Facebook C# SDK: 5.0.3 (BETA): This is fourth BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. For more information about this release see the following blog posts: Facebook C# SDK - Writing your first Facebook Application Facebook C# SDK v5 Beta Internals Facebook C# SDK V5.0.0 (BETA) Released We have spend time trying ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.161: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a new Twitter List network importer, makes some minor feature improvements, and fixes a few bugs. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file...WatchersNET.TagCloud: WatchersNET.TagCloud 01.09.03: Whats NewAdded New Skin TagTastic http://www.watchersnet.de/Portals/0/screenshots/dnn/TagCloud-TagTastic-Skin.jpg Added New Skin RoundedButton http://www.watchersnet.de/Portals/0/screenshots/dnn/TagCloud-RoundedButton-Skin.jpg changes Tag Count fixed on Tag Source Referrals Fixed Tag Count when multiple Tag Sources are usedExtremeML: ExtremeML v1.0 Beta 3: VS solution source code updated for compatibility with VS2010 (accommodates VS2010 breaking changes in T4 template support).Finestra Virtual Desktops: 1.1: This release adds a few more performance and graphical enhancements to 1.0. Switching desktops is now about as fast as you can blink. Desktop switching optimizations New welcome wizard for Vista/7 Fixed a few minor bugs Added a few more options to the options dialog (including ability to disable the taskbar switching)WCF Data Services Toolkit: WCF Data Services Toolkit: The source code and binary releases of the WCF Data Services Toolkit. For simplicity, the source code download doesn't include any of the MSTest files. If you want those, you can pull the code down via MercurialyoutubeFisher: youtubeFisher 3.0 [beta]: What's new: Video capturing improved Supports YouTube's new layout (january 2011) Internal refactoringNearforums - ASP.NET MVC forum engine: Nearforums v5.0: Version 5.0 of the ASP.NET MVC Forum Engine, containing the following improvements: .NET 4.0 as target framework using ASP.NET MVC 3. All views migrated to Razor for cleaner markup. Alternate template (Layout file) for mobile devices 4 Bug Fixes since Version 4.1 Visit the project Roadmap for more details. Webdeploy package sha1 checksum: 28785b7248052465ea0738a7775e8e8744d84c27fuv: 1.0 release, codename Chopper Joe: features: search/replace :o to open file :s to save file :q to quitASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager html generation optimized new features for the lookup (add additional search data ) live demo went aeroEnhSim: EnhSim 2.3.6 BETA: 2.3.6 BETAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 ...TestApi - a library of Test APIs: TestApi v0.6: TestApi v0.6 comes with the following changes: TestApi code development has been moved to Codeplex: Moved TestApi soluton to VS 2010; Moved all source code to Codeplex. All development work is done there now. Fault Injection API: Integrated the unmanaged FaultInjectionEngine.dll COM component in the build; Cleaned up FaultInjectionEngine.dll to build at warning level 4; Implemented “FaultScope” which allows for in-process fault injection; Added automation scripts & sample program; ...AutoLoL: AutoLoL v1.5.5: AutoChat now allows up to 6 items. Items with nr. 7-0 will be removed! News page url's are now opened in the default browser Added a context menu to the system tray icon (thanks to Alex Banagos) AutoChat now allows configuring the Chat Keys and the Modifier Key The recent files list now supports compact and full mode Fix: Swapped mouse buttons are now properly detected Fix: Sometimes the Play button was pressed while still greyed out Champion: Karma Note: You can also run the u...mojoPortal: 2.3.6.2: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2362-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Rawr: Rawr 4.0.19 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...IronRuby: 1.1.2: IronRuby 1.1.2 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. In this release we fixed several major issues: - problems that blocked Gem installation in certain cases - regex syntax: the parser was replaced with a new one that is much more compatible with Ruby 1.9.2 - cras...MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (4): There was a small issue with the previous release that caused errors when installing the templates in VS10 Express. This release corrects the error. Only use this if you encountered issues when installing the previous release. No changes in the binaries.New ProjectsAlchemySearch: A middleware application that allows the searching of Open Text's Alchemy application from a command line or from a calling application. C# .NET 4alltuan: all tuan infoasp.net mvc 2.0 ??????: asp.net mvc 2.0 ??????Basic Text File Generator: This is an investigatory development that creates text files from a windows forms app.bisolu_luc: nothing yetCriteria Pack for EPiServer CMS: This is a collection of useful criteria for extending the personalization mechanism, Visitor Groups, in EPiServer CMS 6 R2 (or later).CTRNN.NET: CTRNN.NET is a C# implementation of Continuous Time Recurrent Neural Networks.DXperience Toolkit: Complimentary controls and libraries from DevExpress.Excel Library for Small Basic: This library extend Small Basic to allows you to read or write contents of a cell in the Excel file from Small Basic program. ???????? Small Basic ????、Small Basic ??? Excel ???????????????????。HealthVault Eventing Sample: A sample application demonstrating the new HealthVault Eventing feature.Hitcents Blog - Example Code: Contains various source code examples from articles at http://www.hitcents.com/blog. Brought to you by Hitcents.INI Modifier: A proprietary application to amend users ini files for JBAe automatically from a central control file.issueIT.net - ”I just found the last bug”: issueIT is the best open source web-based issue tracker for .NET. It’s easy to customize to suit your organization. This project is not finished yet - it is only at a very early stage Leage of Legends Masteries Tool: -Small, portable and fast tool to help you set your masteries. -No Install. -Masteries saved in the same folder: "lolMasterSet.dat" (text file) How to use: - Run and then go to masteries tab in League of Legends luncher. You should see the overlay. Memory View controls: Memory View controls are a pair of controls for real time and static viewing and editing of a memory space. MemoryHexEditor is a hex editor that supports viewing and editing memory, and MemoryHeatMap is a time-based graphical view that shows how memory is read and written to.Moq Contrib: Community contributions to Moq.Operating System Basic: Sistema operacional desenvolvido em QuickBasic, durante minha adolecência.PAiRS - A WPF Memory Card Game: PAiRS is an implementation of a card matching game in which you are given an even number of cards face down in a grid, and you try to flip over 2 cards at a time to create a match until all cards are matched. PAiRS is built using C#, .Net 3.5+ and WPF.RIBA - Rich Internet Business Application for Silverlight: RIBA is an example LOB application with many features to show how to build distributed and secure Line of Business applications based on Silverlight 4. You can find the official blog on www.silverlightblog.netSearcher: Searcher is a Windows Phone project which allows you to quickly search using multiple search engines. SharePoint Term Store Powershell Utilities: An assortment of PowerShell script-based utilities to perform actions on the SharePoint Managed Metadata Term Store. PowerShell script-based utilities have been chosen rather than cmdlets as they are more suitable for environments that have strict installation policies.SmartHotelFoundation: Smart Hotel FoundationSumer Filemanager: This project ensured fully ajax based file management.The Open Source PMU: The Open Source PMU Project provides resources that enable you to build your own SynchroPhasor sensor for use with the openPDC project, research, development, or electric grid observation.Trail Blazer: Movie Trailer Fetcher - Downloads trailers for movies in a collection and saves them in movie folder. It is being developed as a companion to Meta Data Fetchers for the Media Browser project. It is being developed as a standalone C# app but a frontend in MCML is being considered.University Project Tracker: University Project TrackerVideo Backup Fusion: The complete and simply to use backup solution for video portalsWPF ShellFactory: WPF ShellFactory is an easy-to-use application framework for WPF, using a system derived from M-V-VM for its views. It supports multiple modules, either statically or dynamically loaded (i.e. plugins). It also contains mechanisms for application-wide services.

  Read the article

• Kde no sound from Phonon or most KDE apps but mplayer,skype and firefox are ok

  - by zeonglow

  Can somebody tell me why I cannot get any sound with most of KDE 4? I'm running a Gentoo box, I'm in both the 'audio' and 'video' groups. I can get sound with mplayer ( but not smplayer ) Firefox and Skype but nothing else. I can't get the test sound to play from the settings window, but Phonon is not whining about broken sound cards when I start up. I have checked with kmix, we seem to be completely unmuted ( and I can get sound with some apps)

  Read the article

• Attach radeon driver to specific PCI devices?

  - by genpfault

  I have two Radeon cards in this machine, a 6570 and a 6950: lspci | grep VGA: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Turks [Radeon HD 6570] 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] I'm trying to get VGA passthrough to work with KVM on Debian Wheezy, passing through the 6950 as a secondary video card to a Windows 7 guest. This works fine if I blacklist the radeon kernel module via /etc/modprobe.d/. If I remove the blacklist to run X11 (or even just a KMS console) on the 6570 the radeon module seems to attach to both cards: dmesg | egrep "01:00.0|02:00.0|radeon": pci 0000:01:00.0: [1002:6759] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:02:00.0: [1002:6719] type 0 class 0x000300 pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 18: [mem 0xf7d20000-0xf7d3ffff 64bit] pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff] pci 0000:02:00.0: reg 30: [mem 0xf7d00000-0xf7d1ffff pref] pci 0000:02:00.0: supports D1 D2 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none vgaarb: bridge control possible 0000:02:00.0 vgaarb: bridge control possible 0000:01:00.0 pci 0000:01:00.0: Boot video device [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: setting latency timer to 64 radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:01:00.0: irq 46 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:01:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fbcon: radeondrmfb (fb0) is primary device fb0: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 radeon 0000:02:00.0: enabling device (0000 -> 0003) radeon 0000:02:00.0: setting latency timer to 64 radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) radeon 0000:02:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [drm] radeon: 2048M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:02:00.0: irq 49 for MSI/MSI-X radeon 0000:02:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:02:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fb1: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 1 [drm] radeon: finishing device. radeon 0000:02:00.0: ffff88041a941800 unpin not necessary [drm] radeon: ttm finalized pci-stub 0000:02:00.0: claimed by stub pci-stub 0000:02:00.0: irq 49 for MSI/MSI-X This causes the Win7 VM to bluescreen on boot. How can I configure things so that the radeon module only attaches to the 6570 and not the 6950?

  Read the article

< Previous Page | 19 20 21 22 23 24 25 26 27 28 29 30  | Next Page >