Search Results

Search found 2516 results on 101 pages for 'gigabit ethernet'.

Page 19/101 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

  - by Lucas

  I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

  Read the article

• USB 3 to Gigabit Ethernet adapters: where are they?

  - by intuited

  I'm looking for an adapter that will let me use a USB 3 port as a Gigabit Ethernet port. This is proving surprisingly hard to find! Is there some reason why this product is either unavailable or very obscure? Is there an online shop (US/Canada) where I can buy such an item? Newegg, TigerDirect, NCIX, etc. do not seem to carry such an item. I find this surprising since it will provide at least double the bandwidth (possibly quadruple) compared to a USB 2 Ethernet adapter.

  Read the article

• Why does my ethernet connection keep re-connecting, only with Windows?

  - by Nick Bolton

  I'm using Windows 7, and I have several computers on my network. For some reason, the network connection keeps disconnecting and immediately re-connecting. Infact, it may just be refreshing the DHCP lease... but I'm not sure. I've tried changing the network card, and ethernet cable, but the issue is still happening. I can only imagine that the issue is with the ethernet switch, but this doesn't happen on my other desktop which uses the same ethernet switch. Any ideas?

  Read the article

• Setting up router: I can get online via Ethernet, and I can connect to router wirelessly, but can't

  - by Gabe

  I'm setting up a new D-Link N300 router, and trying to connect a MacBook Pro and a MacBook, both running OS X 10.6. As the question says, either computer can connect to the internet when connected to the router via Ethernet. And either one can get on the router's wireless network. But when connected wirelessly (without the Ethernet cable plugged in), neither one can get online. I can't figure out why that would be. Any help appreciated.

  Read the article

• Networking Mac OS X 10.6 and Vista via ethernet?

  - by Moshe

  How can I make Vista home premium access OS X hard drive? and the other way around? I'd like to transfer files via direct ethernet. Plugging in an ethernet cable makes both computers recognize a network, but not the other device. Each firewall is turned off, but no luck. Edit: I don't see Windows Sharing in the Service Column.

  Read the article

• Which drivers do I need for Ethernet and CAN bus on Intel Tolapai?

  - by Hanno Fietz

  I've installed 10.04 Server on an embedded machine (NISE 110 by Nexcom) and the builtin Ethernet and CAN-bus controllers don't work out of the box. The controller seems to be an Intel EP80579 chipset for both, according to lspci. I tried Intel's product website, where they seem to have FreeBSD drivers only. There's also drivers for RedHat, but I'm struggling with the manual build required to get them to work. Googling so far didn't get me anywhere. Which drivers do I need, and where do I get them?

  Read the article

• How to set up an ethernet and wireless network using /etc/network/interfaces?

  - by den-javamaniac

  Hi. Currently I have ethernet and wireless networks configured through a network manager (further NM) but it seems to be a bit buggy (I need a different MAC for ether which is never applied if using NM), so I would like to move all the network configs to interfaces file. I know (or can google for) configuration code, but I'm not sure how NM works and it looks like it overrides interface config. Please advice, how I can handle this issue. NOTE: I also would like to be able to locate and connect to various wireless networks but not sure how to do it.

  Read the article

• Is it possible to provide a wired ethernet connection to external devices with an extra LAN card?

  - by Ben McCormack

  I'm trying to provide a wired ethernet connection (wireless is not an option for this device) to a device (Samsung blu-ray player) without running Cat5 cable all over the home. I have a PC sitting next to this device and the PC is connected to the network via a wireless USB adapter. Is it possible to provide a wired connection from the PC to the wired device using the (currently unused) ethernet port in the back of the computer? Here's how I envision the device getting connected to the internet via my network: Linksys WRT54G v8 Wireless Router | ``--> Windows 7 PC connected via wireless | ``--> Blu-ray player connected via wired connection to the ethernet port on the PC. If so, how is this done? Will I need a crossover cable? What settings will I need to change in Windows 7 so that the device can connect? NOTE: I'm trying to avoid having to buy a wireless bridge and/or hacking a router with an open-source firmware to get this to work. See my previous question for more details.

  Read the article

• My LAN USB NIC is not working in ubuntu 11.10?

  - by Gaurav_Java

  Today i start my system its seems that my LAN port is not working . so i buy one USB to LAN adapter and i plug in ubuntu system its doen't connect automatically .when i check result lsusb its shows me that there is one DM9601 Ethernet adapter is connected when i click on network information in panel its shows me that there is something " wired NEtwork (Broadcom NetLink BCM5784M gigabit Ethernet PCIe) I think want some driver for that .i don't have any idea how it can be used ? here output of sudo lspci -nn *00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) 04:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]* sudo lshw -class network *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 00:1f:16:9a:56:98 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:f4500000-f450ffff *-network DISABLED description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fa:09:02:00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-17-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:46 memory:f4600000-f4601fff *-network description: Ethernet interface physical id: 4 logical name: eth1 serial: 00:60:6e:00:f1:7d size: 100Mbit/s capacity: 100Mbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=dm9601 driverversion=22-Aug-2005 duplex=full firmware=Davicom DM9601 USB Ethernet ip=192.168.1.34 link=yes multicast=yes port=MII speed=100Mbit/s I am using Wimax internet connection which i have to connect from browser . at that time my system is not showing that i am connected to any wired connection. but when i connect internet from other system after getting conneted to internet . when i plug again my USB LAN then its shows that you are conneted to wired connetion. here is screenshot for conneting wimax from browser after connecting to internet network connection shows

  Read the article

• How to connect Ethernet via a Huawei Smart AXMT880s modem (with auto-detection)?

  - by user12285

  It's been well over six months but I have the same router SmartAX MT880d with Ethernet, and the exact same problem : no internet, even though I can successfully reach the modem settings page by entering 192.168.1.1 in Firefox. I'm a total beginner with Ubuntu. My internet works great in Windows but does not work in Ubuntu. Sorry if I don't use the right (technical) terminology to explain my issue. English is not my mother tongue. For 2 weeks, I've been doing reading on the web and forums and the ubuntuguide.org to name a few, but to no avail. Now I see no other solution but to ask for help. My problem is that I can't find a way to put the right digits in the right place because I don't know what numbers I need to put in what files. E.g.: do I need to use DHCP? or a static IP address? No clue whatsoever. I'm concerned that I might put figures in the wrong spaces. For example, is the modem/router's IP exactly 192.168.1.1 for Huawei Smart AXMT880d modem? Is the subnet 255.255.255.0? Gateway 192.168.1.1? I'm confused as I can also see a different IP starting with 155131*** (is it an account number?) on my contract with Huawei (a Chinese ISP). Apart from calling 911, what other numbers do I need to put in and where? How do I check that all the numbers have been entered correctly in every appropriate space before trying to connect the Internet?

  Read the article

• Recommended ADSL/ADSL2 router that supports PPTP VPN dial-out, 802.11n and gigabit ethernet?

  - by Throlkim

  I'm looking for a new router to provide a VPN tunnel for my home network. My plan is to pass all internet traffic over a PPTP VPN provided by the router, which should ensure that the connection stays alive and only passes traffic over that protocol. I'm normally quite a fan of Draytek routers, and their 2710n does seem to feature VPN dial-out but it lacks Gigabit ports (though I can make do with that if the VPN support is good enough). Has anyone got any suggestions or personal experience in a similar setup? I'm happy to consider anything that supports dd-wrt (as I believe that supports VPN-out, though I may be wrong). Bonus points for models available in the UK.

  Read the article

• Is Winpcap able to capture all packets going through a Gigabit NIC without missing any packets?

  - by Patrick L

  I want to use Winpcap to capture all network packets going through a Gigabit NIC of a server. Assuming that I am able to utilize the network link up to 100%, the maximum network speed is 1000Mbps. If we exclude the TCP/IP headers, the maximum TCP data rate should be roughly 940Mbps. Let's say I send a 1GB file through the NIC at 940Mbps using TCP destination port 6000. I use Winpcap to capture all network packets going through the NIC and then dump it to a pcap file. If I use Wireshark to analyze the pcap file and then check the sum of packet size for all network packets sent to TCP port 6000, am I able to get exactly 1GB from the pcap file? Thanks.

  Read the article

• SSL / HTTP / No Response to Curl

  - by Alex McHale

  I am trying to send commands to a SOAP service, and getting nothing in reply. The SOAP service is at a completely separate site from either server I am testing with. I have written a dummy script with the SOAP XML embedded. When I run it at my local site, on any of three machines -- OSX, Ubuntu, or CentOS 5.3 -- it completes successfully with a good response. I then sent the script to our public host at Slicehost, where I fail to get the response back from the SOAP service. It accepts the TCP socket and proceeds with the SSL handshake. I do not however receive any valid HTTP response. This is the case whether I use my script or curl on the command line. I have rewritten the script using SOAP4R, Net::HTTP and Curb. All of which work at my local site, none of which work at the Slicehost site. I have tried to assemble the CentOS box as closely to match my Slicehost server as possible. I rebuilt the Slice to be a stock CentOS 5.3 and stock CentOS 5.4 with the same results. When I look at a tcpdump of the bad sessions on Slicehost, I see my script or curl send the XML to the remote server, and nothing comes back. When I look at the tcpdump at my local site, I see the response just fine. I have entirely disabled iptables on the Slice. Does anyone have any ideas what could be causing these results? Please let me know what additional information I can furnish. Thank you! Below is a wire trace of a sample session. The IP that starts with 173 is my server while the IP that starts with 12 is the SOAP server's. No. Time Source Destination Protocol Info 1 0.000000 173.45.x.x 12.36.x.x TCP 36872 > https [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=137633469 TSER=0 WS=6 Frame 1 (74 bytes on wire, 74 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 0, Len: 0 No. Time Source Destination Protocol Info 2 0.040000 12.36.x.x 173.45.x.x TCP https > 36872 [SYN, ACK] Seq=0 Ack=1 Win=8760 Len=0 MSS=1460 Frame 2 (62 bytes on wire, 62 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 0, Ack: 1, Len: 0 No. Time Source Destination Protocol Info 3 0.040000 173.45.x.x 12.36.x.x TCP 36872 > https [ACK] Seq=1 Ack=1 Win=5840 Len=0 Frame 3 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 1, Ack: 1, Len: 0 No. Time Source Destination Protocol Info 4 0.050000 173.45.x.x 12.36.x.x SSLv2 Client Hello Frame 4 (156 bytes on wire, 156 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 1, Ack: 1, Len: 102 Secure Socket Layer No. Time Source Destination Protocol Info 5 0.130000 12.36.x.x 173.45.x.x TCP [TCP segment of a reassembled PDU] Frame 5 (1434 bytes on wire, 1434 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 1, Ack: 103, Len: 1380 Secure Socket Layer No. Time Source Destination Protocol Info 6 0.130000 173.45.x.x 12.36.x.x TCP 36872 > https [ACK] Seq=103 Ack=1381 Win=8280 Len=0 Frame 6 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 103, Ack: 1381, Len: 0 No. Time Source Destination Protocol Info 7 0.130000 12.36.x.x 173.45.x.x TLSv1 Server Hello, Certificate, Server Hello Done Frame 7 (1280 bytes on wire, 1280 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 1381, Ack: 103, Len: 1226 [Reassembled TCP Segments (2606 bytes): #5(1380), #7(1226)] Secure Socket Layer No. Time Source Destination Protocol Info 8 0.130000 173.45.x.x 12.36.x.x TCP 36872 > https [ACK] Seq=103 Ack=2607 Win=11040 Len=0 Frame 8 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 103, Ack: 2607, Len: 0 No. Time Source Destination Protocol Info 9 0.130000 173.45.x.x 12.36.x.x TLSv1 Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message Frame 9 (236 bytes on wire, 236 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 103, Ack: 2607, Len: 182 Secure Socket Layer No. Time Source Destination Protocol Info 10 0.190000 12.36.x.x 173.45.x.x TLSv1 Change Cipher Spec, Encrypted Handshake Message Frame 10 (97 bytes on wire, 97 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 2607, Ack: 285, Len: 43 Secure Socket Layer No. Time Source Destination Protocol Info 11 0.190000 173.45.x.x 12.36.x.x TLSv1 Application Data Frame 11 (347 bytes on wire, 347 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 285, Ack: 2650, Len: 293 Secure Socket Layer No. Time Source Destination Protocol Info 12 0.190000 173.45.x.x 12.36.x.x TCP [TCP segment of a reassembled PDU] Frame 12 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer No. Time Source Destination Protocol Info 13 0.450000 12.36.x.x 173.45.x.x TCP https > 36872 [ACK] Seq=2650 Ack=578 Win=64958 Len=0 Frame 13 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 2650, Ack: 578, Len: 0 No. Time Source Destination Protocol Info 14 0.450000 173.45.x.x 12.36.x.x TCP [TCP segment of a reassembled PDU] Frame 14 (206 bytes on wire, 206 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 2038, Ack: 2650, Len: 152 No. Time Source Destination Protocol Info 15 0.510000 12.36.x.x 173.45.x.x TCP [TCP Dup ACK 13#1] https > 36872 [ACK] Seq=2650 Ack=578 Win=64958 Len=0 Frame 15 (54 bytes on wire, 54 bytes captured) Ethernet II, Src: Dell_fb:49:a1 (00:21:9b:fb:49:a1), Dst: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6) Internet Protocol, Src: 12.36.x.x (12.36.x.x), Dst: 173.45.x.x (173.45.x.x) Transmission Control Protocol, Src Port: https (443), Dst Port: 36872 (36872), Seq: 2650, Ack: 578, Len: 0 No. Time Source Destination Protocol Info 16 0.850000 173.45.x.x 12.36.x.x TCP [TCP Retransmission] [TCP segment of a reassembled PDU] Frame 16 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer No. Time Source Destination Protocol Info 17 1.650000 173.45.x.x 12.36.x.x TCP [TCP Retransmission] [TCP segment of a reassembled PDU] Frame 17 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer No. Time Source Destination Protocol Info 18 3.250000 173.45.x.x 12.36.x.x TCP [TCP Retransmission] [TCP segment of a reassembled PDU] Frame 18 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer No. Time Source Destination Protocol Info 19 6.450000 173.45.x.x 12.36.x.x TCP [TCP Retransmission] [TCP segment of a reassembled PDU] Frame 19 (1514 bytes on wire, 1514 bytes captured) Ethernet II, Src: 40:40:17:3a:f4:e6 (40:40:17:3a:f4:e6), Dst: Dell_fb:49:a1 (00:21:9b:fb:49:a1) Internet Protocol, Src: 173.45.x.x (173.45.x.x), Dst: 12.36.x.x (12.36.x.x) Transmission Control Protocol, Src Port: 36872 (36872), Dst Port: https (443), Seq: 578, Ack: 2650, Len: 1460 Secure Socket Layer

  Read the article

• What happens when a consumer switch receives a VLAN-tagged Ethernet frame?

  - by netvope

  Suppose you connect a trunk port from a VLAN capable network switch to a (VLAN incapable) consumer-grade network switch via a direct cable. Now the former switch send the later switch a 802.1Q-tagged Ethernet frame. What should the later switch do? Drop the frame? Forward the frame? Undefined behavior? If the behavior is undefined, what is most probable? Edit: Thank you for your answers. To summarize, the behavior of the consumer switch depends on: How it handles frames with 0x8100 in the EtherType field1 How it handles jumbo frames, or frames with payload larger than 1500 bytes Wikipedia has a nice diagram comparing an untagged and a tagged Ethernet frame: There are reports that some consumer-grade switches pass VLAN-tagged frames just fine. 1 or more precisely, where an EtherType field is expected for non-tagged frames

  Read the article

• How do you change your Airport or Ethernet MAC address in Mac OS X 10.6?

  - by Dave Gallagher

  I have a MacBook Pro and would like to set a custom MAC address for either my Airport WiFi card, or Ethernet port. In older versions of Mac OS X, you could do it like this: $ sudo ifconfig en0 ether 00:11:22:33:44:55 // Ethernet $ sudo ifconfig en1 lladdr AA:BB:CC:DD:EE:FF // Airport For it to work on Airport, you'd have to power it on (e.g. $ sudo ifconfig en1 up), ensure it's not connected to any wireless network, and execute the command. I'm aware such a change won't propagate across reboots. Unfortunately, this doesn't work on Mac OS X 10.6.6 anymore. Apple appears to have removed the functionality (the command fails silently). Does anyone have any idea how to do it? Thanks for any help you can offer! :)

  Read the article

• Why is my Wifi connection slower than ethernet even though bandwidth should saturated?

  - by supercheetah

  I'm wondering why it is that my wireless connection is slower than my wired connection for things going to the outside world (so, not files being transferred within the network), which is should be faster than the outside connection, which, I would think, would mean that downloading something like an ISO or other large file from the Internet should be the same either way since that should saturate the connection anyway. Does it have something to do with the encryption (WPA)? Could it have something to do with MTU since the MTU for ethernet can be in the range of 1500 to 9000 bytes, and 2304 bytes for 802.11? Do wireless packets have to be buffered, whereas this wouldn't be an issue with ethernet? What's the math behind the difference?

  Read the article

• Improving TCP performance over a gigabit network lots of connections and high traffic for storage and streaming services

  - by Linux Guy

  I have two servers, Both servers hardware Specification are Processor : Dual Processor RAM : over 128 G.B Hard disk : SSD Hard disk Outging Traffic bandwidth : 3 Gbps network cards speed : 10 Gbps Server A : for Encoding videos Server B : for storage videos andstream videos over web interface like youtube The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos Both servers in same network , when i do ping from Server A to Server B i got high time latency above 1.0ms , the time range time=52.7 ms to time=215.7 ms - This is the output of iftop utility 353Mb 707Mb 1.04Gb 1.38Gb 1.73Gb mqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqq server.example.com => ip.address 6.36Mb 4.31Mb 1.66Mb <= 158Kb 94.8Kb 35.1Kb server.example.com => ip.address 1.23Mb 4.28Mb 1.12Mb <= 17.1Kb 83.5Kb 21.9Kb server.example.com => ip.address 395Kb 3.89Mb 1.07Mb <= 6.09Kb 109Kb 28.6Kb server.example.com => ip.address 4.55Mb 3.83Mb 1.04Mb <= 55.6Kb 45.4Kb 13.0Kb server.example.com => ip.address 649Kb 3.38Mb 1.47Mb <= 9.00Kb 38.7Kb 16.7Kb server.example.com => ip.address 5.00Mb 3.32Mb 1.80Mb <= 65.7Kb 55.1Kb 29.4Kb server.example.com => ip.address 387Kb 3.13Mb 1.06Mb <= 18.4Kb 39.9Kb 15.0Kb server.example.com => ip.address 3.27Mb 3.11Mb 1.01Mb <= 81.2Kb 64.5Kb 20.9Kb server.example.com => ip.address 1.75Mb 3.08Mb 2.72Mb <= 16.6Kb 35.6Kb 32.5Kb server.example.com => ip.address 1.75Mb 2.90Mb 2.79Mb <= 22.4Kb 32.6Kb 35.6Kb server.example.com => ip.address 3.03Mb 2.78Mb 1.82Mb <= 26.6Kb 27.4Kb 20.2Kb server.example.com => ip.address 2.26Mb 2.66Mb 1.36Mb <= 51.7Kb 49.1Kb 24.4Kb server.example.com => ip.address 586Kb 2.50Mb 1.03Mb <= 4.17Kb 26.1Kb 10.7Kb server.example.com => ip.address 2.42Mb 2.49Mb 2.44Mb <= 31.6Kb 29.7Kb 29.9Kb server.example.com => ip.address 2.41Mb 2.46Mb 2.41Mb <= 26.4Kb 24.5Kb 23.8Kb server.example.com => ip.address 2.37Mb 2.39Mb 2.40Mb <= 28.9Kb 27.0Kb 28.5Kb server.example.com => ip.address 525Kb 2.20Mb 1.05Mb <= 7.03Kb 26.0Kb 12.8Kb qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq TX: cum: 102GB peak: 1.65Gb rates: 1.46Gb 1.44Gb 1.48Gb RX: 1.31GB 24.3Mb 19.5Mb 18.9Mb 20.0Mb TOTAL: 103GB 1.67Gb 1.48Gb 1.46Gb 1.50Gb I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.2 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.2, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.1 port 38895 connected with 0.0.0.2 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes ifconfig server A eth0 Link encap:Ethernet HWaddr 00:25:90:ED:9E:AA inet addr:0.0.0.1 Bcast:0.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1202795665 errors:0 dropped:64334 overruns:0 frame:0 TX packets:2313161968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:893413096188 (832.0 GiB) TX bytes:3360949570454 (3.0 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2207544 errors:0 dropped:0 overruns:0 frame:0 TX packets:2207544 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:247769175 (236.2 MiB) TX bytes:247769175 (236.2 MiB) ifconfig Server B eth2 Link encap:Ethernet HWaddr 00:25:90:82:C4:FE inet addr:0.0.0.2 Bcast:0.0.0.2 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39973046980 errors:0 dropped:1828387600 overruns:0 frame:0 TX packets:69618752480 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3013976063688 (2.7 TiB) TX bytes:102250230803933 (92.9 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1049495 errors:0 dropped:0 overruns:0 frame:0 TX packets:1049495 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:129012422 (123.0 MiB) TX bytes:129012422 (123.0 MiB) Netstat -i on Server B # netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth2 9000 0 42098629968 0 2131223717 0 73698797854 0 0 0 BMRU lo 65536 0 1077908 0 0 0 1077908 0 0 0 LRU I Turn up send/receive buffers on the network card to 2048 and problem still persist I increase the MTU for server A and problem still persist and i increase the MTU for server B for better connectivity and transfer speed but it couldn't transfer at all The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service in server B the transfer in server A at full speed, after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

  Read the article

• Routing traffic to specific web sites through Ethernet, rest via wifi on Mac OS X 10.6?

  - by user32448

  Hi I have two separate Internet connections connected to a Mac and I'd like one of them (via Ethernet eth0 gateway 192.168.2.1) to serve for just backing up to an remote online storage, and the other one (via Airport en1 gateway 192.168.1.1) for all other Internet traffic. I tried using "route" from the terminal as follows: sudo route add -host 98.207.226.113 -interface eth0 (just for testing against the site www.whatismyip.org whose IP is 98.207.226.113, to see through which gateway the traffic is routed) I can see using netstat that the route is added: $ netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 49 0 en1 98.207.226.113 192.168.2.1 UGSc 0 0 eth0 However, the traffic in this case does NOT get routed properly through Ethernet, as if the routing definition I made is ignored. Any ideas? Thanks!

  Read the article

• How to route packets from Wi-Fi to Ethernet on OSX?

  - by Alexander Artemenko

  I have a trouble, configuring a home network. Here is how my devices are connected together: Internet     ? Wi-Fi Router ? MacBook     ? iMac ?ethernet cable? Synology NAS I have no ability to plugin NAS right into the Wi-Fi router. The problem is that MacBook does not see NAS, because they are in different networks — I configured Wi-Fi Router to serve 192.168.10.0/24 addresses, and configured iMac's ethernet connection to use 192.168.20/24 network. Is there a way to setup route from MacBook to the NAS?

  Read the article

• pptpd configuration

  - by Ian R.

  I would like a little help on configuring pptp so I can use my server as a vpn server since I have 10 ip's on it and I travel a lot so that would really help me and my partners. I managed to install everything needed but my vpn client fails to connect due to some reason that I cannot understand. I know there are 2 files in pptp that you're supposed to edit so I will post my 2 files here: /etc/ppp/pptpd-options name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 proxyarp nodefaultroute lock nobsdcomp /etc/pptpd.conf option /etc/ppp/pptpd-options logwtmp localip xx.158.177.231 remoteip xx.158.177.103,xx.158.177.116,xx.158.177.121,xx.158.177.124,xx.158.177.125,xx.158.177.131,xx.158.177.134,xx.158.177.139,xx.158.177.142,xx.158.177.145 interfaces file eth0 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.231 Bcast:xx.158.177.255 Mask:255.255.254.0 inet6 addr: xx80::216:3eff:fe51:31ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:56352 errors:0 dropped:0 overruns:0 frame:0 TX packets:3xx15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4884030 (4.8 MB) TX bytes:6780974 (6.7 MB) Interrupt:16 eth0:1 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.103 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:2 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.116 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:3 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.121 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:4 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.124 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:5 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.125 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:6 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.131 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:7 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.134 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:8 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.139 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:9 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.142 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 eth0:10 Link encap:Ethernet HWaddr 00:16:3e:51:31:ba inet addr:xx.158.177.145 Bcast:xx.158.177.255 Mask:255.255.254.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:286 (286.0 B) TX bytes:286 (286.0 B)

  Read the article

• Improving TCP performance over a gigabit network with lots of connections and high traffic of small packets

  - by MinimeDJ

  I’m trying to improve my TCP throughput over a “gigabit network with lots of connections and high traffic of small packets”. My server OS is Ubuntu 11.10 Server 64bit. There are about 50.000 (and growing) clients connected to my server through TCP Sockets (all on the same port). 95% of of my packets have size of 1-150 bytes (TCP header and payload). The rest 5% vary from 150 up to 4096+ bytes. With the config below my server can handle traffic up to 30 Mbps (full duplex). Can you please advice best practice to tune OS for my needs? My /etc/sysctl.cong looks like this: kernel.pid_max = 1000000 net.ipv4.ip_local_port_range = 2500 65000 fs.file-max = 1000000 # net.core.netdev_max_backlog=3000 net.ipv4.tcp_sack=0 # net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.core.somaxconn = 2048 # net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 # net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_mem = 50576 64768 98152 # net.core.wmem_default = 65536 net.core.rmem_default = 65536 net.ipv4.tcp_window_scaling=1 # net.ipv4.tcp_mem= 98304 131072 196608 # net.ipv4.tcp_timestamps = 0 net.ipv4.tcp_rfc1337 = 1 net.ipv4.ip_forward = 0 net.ipv4.tcp_congestion_control=cubic net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 # net.ipv4.tcp_orphan_retries = 1 net.ipv4.tcp_fin_timeout = 25 net.ipv4.tcp_max_orphans = 8192 Here are my limits: $ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 193045 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1000000 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 1000000 [ADDED] My NICs are the following: $ dmesg | grep Broad [ 2.473081] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.62.12-0 (2011/03/20) [ 2.477808] bnx2x 0000:02:00.0: eth0: Broadcom NetXtreme II BCM57711E XGb (A0) PCI-E x4 5GHz (Gen2) found at mem fb000000, IRQ 28, node addr d8:d3:85:bd:23:08 [ 2.482556] bnx2x 0000:02:00.1: eth1: Broadcom NetXtreme II BCM57711E XGb (A0) PCI-E x4 5GHz (Gen2) found at mem fa000000, IRQ 40, node addr d8:d3:85:bd:23:0c [ADDED 2] ethtool -k eth0 Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp-segmentation-offload: on udp-fragmentation-offload: off generic-segmentation-offload: on generic-receive-offload: on large-receive-offload: on rx-vlan-offload: on tx-vlan-offload: on ntuple-filters: off receive-hashing: off [ADDED 3] sudo ethtool -S eth0|grep -vw 0 NIC statistics: [1]: rx_bytes: 17521104292 [1]: rx_ucast_packets: 118326392 [1]: tx_bytes: 35351475694 [1]: tx_ucast_packets: 191723897 [2]: rx_bytes: 16569945203 [2]: rx_ucast_packets: 114055437 [2]: tx_bytes: 36748975961 [2]: tx_ucast_packets: 194800859 [3]: rx_bytes: 16222309010 [3]: rx_ucast_packets: 109397802 [3]: tx_bytes: 36034786682 [3]: tx_ucast_packets: 198238209 [4]: rx_bytes: 14884911384 [4]: rx_ucast_packets: 104081414 [4]: rx_discards: 5828 [4]: rx_csum_offload_errors: 1 [4]: tx_bytes: 35663361789 [4]: tx_ucast_packets: 194024824 [5]: rx_bytes: 16465075461 [5]: rx_ucast_packets: 110637200 [5]: tx_bytes: 43720432434 [5]: tx_ucast_packets: 202041894 [6]: rx_bytes: 16788706505 [6]: rx_ucast_packets: 113123182 [6]: tx_bytes: 38443961940 [6]: tx_ucast_packets: 202415075 [7]: rx_bytes: 16287423304 [7]: rx_ucast_packets: 110369475 [7]: rx_csum_offload_errors: 1 [7]: tx_bytes: 35104168638 [7]: tx_ucast_packets: 184905201 [8]: rx_bytes: 12689721791 [8]: rx_ucast_packets: 87616037 [8]: rx_discards: 2638 [8]: tx_bytes: 36133395431 [8]: tx_ucast_packets: 196547264 [9]: rx_bytes: 15007548011 [9]: rx_ucast_packets: 98183525 [9]: rx_csum_offload_errors: 1 [9]: tx_bytes: 34871314517 [9]: tx_ucast_packets: 188532637 [9]: tx_mcast_packets: 12 [10]: rx_bytes: 12112044826 [10]: rx_ucast_packets: 84335465 [10]: rx_discards: 2494 [10]: tx_bytes: 36562151913 [10]: tx_ucast_packets: 195658548 [11]: rx_bytes: 12873153712 [11]: rx_ucast_packets: 89305791 [11]: rx_discards: 2990 [11]: tx_bytes: 36348541675 [11]: tx_ucast_packets: 194155226 [12]: rx_bytes: 12768100958 [12]: rx_ucast_packets: 89350917 [12]: rx_discards: 2667 [12]: tx_bytes: 35730240389 [12]: tx_ucast_packets: 192254480 [13]: rx_bytes: 14533227468 [13]: rx_ucast_packets: 98139795 [13]: tx_bytes: 35954232494 [13]: tx_ucast_packets: 194573612 [13]: tx_bcast_packets: 2 [14]: rx_bytes: 13258647069 [14]: rx_ucast_packets: 92856762 [14]: rx_discards: 3509 [14]: rx_csum_offload_errors: 1 [14]: tx_bytes: 35663586641 [14]: tx_ucast_packets: 189661305 rx_bytes: 226125043936 rx_ucast_packets: 1536428109 rx_bcast_packets: 351 rx_discards: 20126 rx_filtered_packets: 8694 rx_csum_offload_errors: 11 tx_bytes: 548442367057 tx_ucast_packets: 2915571846 tx_mcast_packets: 12 tx_bcast_packets: 2 tx_64_byte_packets: 35417154 tx_65_to_127_byte_packets: 2006984660 tx_128_to_255_byte_packets: 373733514 tx_256_to_511_byte_packets: 378121090 tx_512_to_1023_byte_packets: 77643490 tx_1024_to_1522_byte_packets: 43669214 tx_pause_frames: 228 Some info about SACK: When to turn TCP SACK off?

  Read the article

• Realtek RTL8111/8168B wired network doesn't work anymore

  - by Radar4002

  This sounds like it's a common problem upgrading 11.04, but I am having trouble finding a common solution, and one that will work for me. I just applied updates via the update manager and now my wired network connection is down. I know Ubuntu network settings is the issue, because I have a dual-boot with Win 7 and my network/internet is fine on Win 7. I don't know too much about networking, so what can I do to trouble shoot this issue? I can choose an older grub version, 2.6.38-8 instead of 2.6.38-11 and this does not resolve the issue. Here is my lspci result: 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) 00:09.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H) 00:0a.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: ATI Technologies Inc Device 43a0 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) Here is my sudo lshw -class network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 03 serial: 6c:f0:49:e7:72:e8 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:9e00(size=256) memory:fceff000-fcefffff memory:fcef8000-fcefbfff memory:fce00000-fce1ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth1 version: 03 serial: 6c:f0:49:e7:72:ea size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:8e00(size=256) memory:fddff000-fddfffff memory:fddf8000-fddfbfff memory:fdd00000-fdd1ffff

  Read the article

• Why can I not access the internet when Windows 7 finds no issue with the ethernet connection and the network can see my device?

  - by WannabeCoder

  So I just moved from a house to an apartment. In the house and the apartment I had Uverse set up - and in both I had my desktop connected via a ~40 foot long cat5 cable. However, upon moving to the apartment I found that my ethernet connection no longer provides internet. This would seem like a mundane problem if not for: The router can see the computer on the network Windows 7 (the desktop's OS) detects no problems with the ethernet connection. Connections over the internet (i.e. browser windows, Pandora, etc.) do not immediately fail. Instead they load for 2 minutes and then finally give up. Devices connected over the Wifi (PS4, Laptop) access the internet just fine While removing the cat5 cable from my house, I accidentally damaged the locking tab but managed to bend it back into the appropriate position. I would suspect that a bad cat5 cable might be to blame if not for the above issues (thought I've heard bad cat5 cables cause the most nonsensical problems) and the fact that I tested the cat5 cable by having it share internet between my laptop (working internet) to my desktop and it functioned just fine and provided the desktop with internet. My ipconfig /all successfully finds a default gateway, DHCP server, and DNS server. What could possibly be causing the problem?

  Read the article

• Can I get ethernet out of my Verizon FIOS set-top box?

  - by Tom Hughes

  Setup: my home network is long & skinny, and the FIOS-connected router is all the way at one of the apartment. At the other end, far away (and a floor higher) is my HD TV, which gets a cable-TV signal from a Verizon set-top box that is coax-connected back to the FIOS on-premises equipment. Wi-Fi won't work, the apartment is too stretched out, with old, thick walls and floors. Goal: I think there are three ways to get ethernet back to where the HD TV is: 1) run a cable! this isn't crazy but isn't cheap either (my building won't let me do it, it involves hiring an electrician because the cable would run partly through the public hallway ceiling) 2) split the coax near the TV and put in... a MoCA device? 3) somehow tease the set-top box, which has an RJ-11 (ethernet) port on the back, to give me network access. Question: any other choices? and, is one choice better than the others? #3 is by far the most desirable because it would involve the least wiring -- but I can't find any resources to help make it happen. #2 is a bit scary, I don't want to degrade service to the TV or anywhere else for that matter.

  Read the article

• Make Network Manager use bridge for PPPoE instead of only working on ethernet?

  - by Azendale

  My ISP uses PPPoE on their DSL connections. I use Network Manager to connect to this using a bridged modem connected to eth0. Often, I want to test networking things, so a set myself up a KVM machine with a tap interface. I can then connect these interfaces to to virtual 'switches' by adding them to bridges. (I work for my ISP). Sometimes, I want to test cases where the PPPoE is connected more than once. For this, I would like to be able to add eth0 to my 'switch' (a bridge) so the VMs can have a 'bridged modem' connection to the internet. But I would like to still be able to run the PPPoE for my computer at the same time. Which means that I need to get network-manager to run PPPoE over the bridge (or eth0). The problem is that it considers eth0 (and the bridge) 'not managed' by network manager, so it refuses to use it. So, how can I have network manager dial PPPoE over a bridge?

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >