Search Results

Search found 527 results on 22 pages for 'ha'.

Page 19/22 | < Previous Page | 15 16 17 18 19 20 21 22  | Next Page >

• LACP : Cisco ASA 5515 & Switch ProCurve 2920

  - by user979276

  I've two ASAs 5515 connected in failover Active/Stand by (on Gi0/5) My two ASAs are connected to two Switch ProCurve 2920 to have HA if something happens. So I plug something like that (don't pay attention to the arrows) : So one the ASA, I created a Port-Channel like that : interface GigabitEthernet0/0 nameif outside security-level 0 ip address 192.168.1.3 255.255.255.0 standby 192.168.1.4 ! interface GigabitEthernet0/1 speed 1000 duplex full channel-group 1 mode passive no nameif no security-level no ip address ! interface GigabitEthernet0/2 speed 1000 duplex full channel-group 1 mode passive no nameif no security-level no ip address ! interface Port-channel1.1 vlan 1 nameif inside security-level 100 ip address 192.168.8.1 255.255.255.0 standby 192.168.8.2 ! interface Port-channel1.10 vlan 10 nameif guest security-level 50 ip address 172.16.100.2 255.255.255.224 standby 172.16.100.3 ! interface Port-channel1.16 vlan 16 nameif dmz security-level 50 ip address 192.168.16.1 255.255.255.0 standby 192.168.16.2 On the switch, I created a trunk LACP capable with the port 1 and 2 on each switch, force the speed to 1000 and put the port un full duplex mode. BUT this is not working... I tried many things and I can't make it work. In this configuration, I can't ping anything between my ASA and my Switch (or any object connected). Here what I get on my ASA : Channel group 1 LACP port Admin Oper Port Port Port Flags State Priority Key Key Number State ----------------------------------------------------------------------------- Gi0/2 SP not-bndl 32768 0x1 0x1 0x3 0xc Gi0/1 FP not-bndl 32768 0x1 0x1 0x2 0x6 And on the Switchs : PORT LACP TRUNK PORT LACP LACP NUMB ENABLED GROUP STATUS PARTNER STATUS ----- ------- ----- ------ ------- ------ 1 Active trk1 Broken Yes Failure 2 Active trk1 Broken Yes Failure If I change the Cisco interface to LACP mode On, I can ping the switch from the ASA but nothing other objects conneted on the switch. If I look at the statut of LACP on the switch I see this : PORT LACP TRUNK PORT LACP LACP NUMB ENABLED GROUP STATUS PARTNER STATUS ----- ------- ----- ------ ------- ------ 1 Active trk1 Up No Success 2 Active trk1 Up No Success I don't have any clue on what's going on so If someone have any idea and help me on this, it would be great ! Feel free to ask me anything if you need any more information ! Thanks a lot !

  Read the article

• Cannot change default application association of certain file types

  - by H.B.

  After associating my MP3 files with MPlayer i can no longer change that association using the Choose default program... dialogue, the Always use this [...] Checkbox is always greyed out (Control Panel > Default Programs > Associate a file type or protocol with a program does not let me change it either). That also happened for MP4s but not for MKVs for example, and if i associate my MP3s with other applications like VLC it does not get blocked. I would really like to know why that is and if i can avoid this beforehand (thankfully i know ways to fix it afterwards already). Edit: Another obervation: The blocking programs (i managed to block it with an association to Visual Studio as well) do not appear in the Recommended Programs of the open-with-dialogue (And the explorer said: "The current program is not recommended, but i won't let you change it, ha!"). Edit: A screenshot as requested: As you can see on the top left (if you know the icon of MPlayer), the file is currently associated with MPlayer. Edit: Ways to fix it (Note: This question is not about fixing it) Using the Default Programs Control Panel > Default Programs > Set Default Programs, select WMP, Choose defaults for this program, check .mp3 This should reassociate the files with WMP and you can create a new association in the explorer. Using the registry (As always, keep your hands off it unless you know what you are doing or if you are fine with accidentally breaking your system) HKEY_CURRENT_USER > Software > Microsoft > Windows > CurrentVersion > Explorer > FileExts > .mp3 Here you could for example clean up the open-with-list, and the current default program seems to be saved here as well in the key UserChoice, there you can change the ProgId string to another application, you can associate it with WMP by entering WMP11.AssocFile.MP3 or just pick another application right away. You may need to mess with permissions on the key though, if you cannot change the ProgId value.

  Read the article

• How To Configure Remote Desktop To Hyper-V Guest Virtual Machines

  - by Brian Jackett

  Configuring Remote Desktop (RDP) from a host Hyper-V machine to a guest virtual machine can be tricky, so this post is dedicated to the issues and resolution steps I went through to allow RDP.  Cutting to the point, below are the things to look for followed by some explanation about my scenario if you care to read.  This is not an exhaustive list of what is required, just the items that were causing problems for my particular scenario. Requirements Allow Remote Desktop Connections in guest OS. The network adapter type must allow communication with host machine (e.g. use an “Internal” virtual adapter.) If running Server 2008 R2 on guest, network discovery mode must be turned on. If running Server 2008 R2 on guest, the services supporting network discovery mode must be running: - DNS Client - Function Discovery Resource Publication - SSDP Discovery - UPnP Device Host My Environment     A quick word about my environment.  I am running Windows Server 2008 R2 with Hyper V on my laptop and numerous guest VMs running Windows Server 2003 R2 or Windows Server 2008 R2.  I run a domain controller VM and then 1 or 2 SharePoint servers depending on my work needs.  I’ve found this setup to work well except when it comes to the display window for my VMs. The Issue     Ever since I began running Hyper-V I haven’t been able to RDP to my guest VMs which means the resolution for my connection windows ha been limited to what the native Hyper-V connections allow.  During personal use I can put the resolution up to 1152 x 864, but during presentations I am usually limited to a measly 800 x 600.  That is until today when I decided to fully investigate why I couldn’t connect via RDP.     First a thank you to John Ross (@johnrossjr), Christina Wheeler (@cwheeler76) and Clayton Cobb (@warrtalon) for various suggestions while I was researching tonight.  As it turns out I had not 1, not 2, but 3 items preventing me from using RDP.  Let’s dig into the requirements above. Allow RDP Connection     This item I had previously taken care of, but it bears repeating because by default Windows Server 2008 R2 does not allow RDP connections.  Change the setting from “Don’t allow…” to whichever “Allow connections…” setting suits your needs.  I chose the less secure option as this is just my dev laptop. Network Adapter Type     When I originally configured my VMs I configured each to use 2 network adapters: one using the physical ethernet adapter for internet use and a virtual private adapter for communication between the VMs.  The connection for the ethernet adapter is an "”External” adapter and thus doesn’t connect between the host and guest.  The virtual private adapter allowed communication ONLY between the VMs and not to my host.  There is a third option “Internal” which allows communication between VMs as well as to the host.  After finding out this distinction I promptly created an Internal network adapter and assigned that to my VMs. Turn On Network Discovery     Seems like a pretty common sense thing, but in order to allow remote desktop connections the target computer must able to be found by the source computer (explained here.)  One of the settings that controls if a computer can be found on the network is aptly named Network Discovery.  By default Windows Server 2008 R2 turns Network Discovery off for security purposes.  To enable it open up the Network and Sharing Center.  Click “Change Advanced Sharing Settings” on the left.  On the following screen select “Turn on network discovery” for the currently used profile and click Save Settings.  You may notice though that your selection to turn on network discovery doesn’t save.  If this is the case then you most likely don’t have the supporting services running (as was my case.) Network Discovery Supporting Services     There are a total of 4 services (listed again below) that need to be running before you can turn on network discovery (explained here.)  The below images highlight these services.  In my guest VM I found that I had DNS Client already running while the other 3 were disabled.  I set them all to enabled and started the ones that were stopped.  After this change I returned to the Sharing settings screen and found that Network Discovery was turned on.  I’m not sure whether this was picking up my attempt to turn it on previously or if starting those services turned it on.  Either way the end result was a success. - DNS Client - Function Discovery Resource Publication - SSDP Discovery - UPnP Device Host Before and After Results     The first image is the smaller square shaped viewing window used by the Hyper-V native connection.  The second is the full-screen RDP connection in all its widescreen glory. Conclusion     Over the past few months I’ve found Hyper-V to be very useful for virtualizing my development environments, but I’ve also had a steep learning curve to get various items configured just right.  Allowing RDP connections to guest VMs was one area that I hadn’t been able to get right for the longest time.  Now that I resolved these issues I hope that others can avoid the pitfalls that I ran into.  If you know of any other items I left off feel free to let me know.        -Frog Out   Links Turning on Network Discovery http://sqlblog.com/blogs/john_paul_cook/archive/2009/08/15/remote-desktop-connection-on-windows-server-2008-r2.aspx Services required for Network Discovery http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2e1fea01-3f2b-4c46-a631-a8db34ed4f84

  Read the article

• Oracle WebCenter: uma nova vis&atilde;o para os Portais

  - by Denisd

  O conceito de “Portal” existe há muito tempo, mas está sempre mudando. Afinal de contas, o que é um portal? Nos primórdios da internet, o termo “portal” era utilizado para sites que guardavam muitas páginas (ou seja, muita informação). “Portal de notícias” era um termo comum, embora estes “portais” não passassem de um conjunto de páginas estáticas, que basicamente serviam conteúdo aos usuários. Com a evolução da tecnologia, os web sites passaram a ficar mais dinâmicos, permitindo uma interação maior do usuário. Sites de comunidades sociais são o melhor exemplo disso. Neste momento, o “portal” passou a ser não apenas um grupo de páginas, mas um conjunto de serviços e recursos dinâmicos, como a possibilidade de publicar fotos e vídeos, e compartilhar este conteúdo com amigos on-line. Aqui temos o que podemos chamar de “Portais Sociais”. Ao mesmo tempo, dentro das empresas, outra mudança estava acontecendo: a criação de padrões de comunicação entre aplicativos, sendo o mais famoso destes padrões a tecnologia de Web Services. Com estes padrões, as aplicações podem trocar informações e facilitar a experiência dos usuários. Desta forma, é possível desenvolver mini-aplicativos (chamados “portlets”), que publicam informações dos sistemas corporativos nas páginas dos portais internos. Estes portlets permitem interações com os sistemas, para permitir que os usuários tenham acesso rápido e fácil às informações. Podemos chamar estes portais de “Portais Transacionais”. Aqui temos 2 pontos que eu gostaria de chamar a atenção: 1 – O desenvolvimento de portlets é necessário porque eu não consigo publicar uma aplicação inteira no portal, normalmente por uma questão de padrões de desenvolvimento. Explicando de uma forma simples, a aplicação não foi feita para rodar dentro de um portal. Portanto, é necessário desenvolvimento adicional para criar mini-aplicativos que replicam (ou melhor, duplicam) a lógica do aplicativo principal, dentro do portal. 2 – Os aplicativos corporativos normalmente não incluem os recursos colaborativos de um portal (por exemplo, fóruns de discussão, lista de contatos com sensores de presença on-line, wikis, tags, etc), simplesmente porque este tipo de recurso normalmente não está disponível de forma “empacotada” para ser utilizada em um aplicativo. Desta forma, se eu quiser que a minha aplicação tenha um fórum de discussão para que os meus clientes conversem com a minha equipe técnica, eu tenho que desenvolver todo o motor do fórum de discussão dentro do meu aplicativo, o que se torna inviável, devido ao custo, tempo e ao fato de que este tipo de recurso normalmente não está no escopo da minha aplicação. O que acaba acontecendo é que os usuários fazem a parte “transacional” dentro do aplicativo, mas acabam utilizando outras interfaces para atender suas demandas de colaboração (neste caso, utilizariam um fórum fora da aplicação para discutir problemas referentes ao aplicativo). O Oracle WebCenter 11g vem para resolver estes dois pontos citados acima. O WebCenter não é simplesmente um novo portal, com alguns recursos interessantes; ele é uma nova forma de se pensar em Portais Corporativos (portais que reúnem os cenários citados acima: conteúdo, social e transacional). O WebCenter 11g é extenso demais para ser descrito em um único post, e nem é a minha intenção entrar no detalhe deste produto agora. Mas podemos definir o WebCenter 11g como sendo 3 “coisas”: - Um framework de desenvolvimento, aonde os recursos que as minhas aplicações irão utilizar (por exemplo, validação de crédito, consulta à estoque, registro de um pedido, etc), são desenvolvidos de forma a serem reutilizados por qualquer outra aplicação ou portlet que seja executado neste framework. Este tipo de componente reutilizável é chamado de “Task Flow”. - Um conjunto de serviços voltados à colaboração, como fóruns, wikis, blogs, tags, links, people connections, busca, bibliotecas de documentos, etc. Todos estes recursos colaborativos também estão disponíveis como Task Flows, desta forma, qualquer aplicação que eu desenvolva pode se beneficiar destes recursos. - Um “Portal”, do ponto de vista tradicional, aonde os usuários podem criar páginas, inserir e compartilhar conteúdo com outros usuários. Este Portal consegue utilizar os recursos desenvolvidos no Framework, garantindo o reuso. A imagem abaixo traz uma visão deste Portal. Clique para ver em tamanho maior. A grande inovação que o WebCenter traz é que a divisão entre “portal” e “aplicação” desaparece: qualquer aplicação agora pode ser desenvolvida com recursos de portal. O meu sistema de CRM, por exemplo, pode ter um fórum de discussão para os clientes. O meu sistema de suporte pode utilizar Wikis para montar FAQs de forma rápida. O sistema financeiro pode incluir uma biblioteca de documentos para que o usuário possa consultar os manuais de procedimento. Portanto, não importa se eu estou desenvolvendo uma “aplicação” ou um “portal”; o que importa é que os meus usuários agora terão em uma única interface as funcionalidades dos aplicativos e os recursos de colaboração. Este conceito, dentro da Oracle, é chamado de “Composite Applications”, e é a base para a próxima geração dos aplicativos Oracle. Nos próximos posts iremos falar (é claro) sobre como o WebCenter e o UCM se relacionam, e que tipo de recursos podem ser aproveitados nas aplicações/portais. Até breve!

  Read the article

• Microsoft Sql Server driver for Nodejs - Part 2

  - by chanderdhall

  Nodejs, Sql server and Json response with Rest This post is part 2 of Microsoft Sql Server driver for Node js.In this post we will look at the JSON responses from the Microsoft Sql Server driver for Node js. Pre-requisites: If you have read the Part 1 of the series, you should be good. We will be using a framework for Rest within Nodejs - Restify, but that would need no prior learning. Restify: Restify is a simple node module for building RESTful services. It is slimmer than Express. Express is a complete module that has all what you need to create a full-blown browser app. However, Restify does not have additional overhead of templating, rendering etc that would be needed if your app has views. So, as the name suggests it's an awesome framework for building RESTful services and is very light-weight. Set up - You can continue with the same directory or project structure we had in the previous post, or can start a new one. Install restify using npm and you are good to go. npm install restify Go to Server.js and include Restify in your solution. Then create the server object using restify.CreateServer() - SLICK - ha? var restify = require('restify'); var server = restify.createServer(); server.listen(8080, function () { console.log('%s listening at %s', server.name, server.url); }); Then make sure you provide a port for the Server to listen at. The call back function is optional but helps you for debugging purposes. Once you are done, save the file and then go to the command prompt and hit 'node server.js' and you should see the following:   To test the server, go to your browser and type the address 'http://localhost:8080/' and oops you will see an error.   Why is that? - Well because we haven't defined any routes. Let's go ahead and create a route. To begin with I'd like to return whatever is typed in the url after my name and the following code should do it. server.get('/ChanderDhall/:status', function respond(req, res, next) { res.end("hello " + req.params.name + "") }); You can also avoid writing call backs inline. Something like this. function respond(req, res, next) { res.end("Chander Dhall " + req.params.name + ""); } server.get('/hello/:name', respond); Now if you go ahead and type http://localhost:8080/ChanderDhall/LovesNode you will get the response 'Chander Dhall loves node'. NOTE: Make sure your url has the right case as it's case-sensitive. You could have also typed it in as 'server.get('/chanderdhall/:name', respond);' Stored procedure: We've talked a lot about Restify now, but keep in mind the post is about being able to use Sql server with Node and return JSON. To see this in action, let's go ahead and create another route to a list of Employees from a stored procedure. server.get('/Employees', Employees); The following code will return a JSON response.  function Employees(req, res, next) { res.header("Content-Type: application/json"); //Need to specify the Content-Type which is //JSON in our case. sql.open(conn_str, function (err, conn) { if (err) { //Logs an error console.log("Error opening the database connection!"); return; } console.log("before query!"); conn.queryRaw("exec sp_GetEmployees", function (err, results) { if (err) { //Connection is open but an error occurs whileWhat else can be done? May be create a formatter or may be even come up with a hypermedia type but that may upset some pragmatists. Well, that's going to be a totally different discussion and is really not part of this series. Summary: We've discussed how to execute a stored procedure using Microsoft Sql Server driver for Node. Also, we have discussed how to format and send out a clean JSON to the app calling this API.  

  Read the article

• Scripting out Contained Database Users

  - by Argenis

    Today’s blog post comes from a Twitter thread on which @SQLSoldier, @sqlstudent144 and @SQLTaiob were discussing the internals of contained database users. Unless you have been living under a rock, you’ve heard about the concept of contained users within a SQL Server database (hit the link if you have not). In this article I’d like to show you that you can, indeed, script out contained database users and recreate them on another database, as either contained users or as good old fashioned logins/server principals as well. Why would this be useful? Well, because you would not need to know the password for the user in order to recreate it on another instance. I know there is a limited number of scenarios where this would be necessary, but nonetheless I figured I’d throw this blog post to show how it can be done. A more obscure use case: with the password hash (which I’m about to show you how to obtain) you could also crack the password using a utility like hashcat, as highlighted on this SQLServerCentral article. The Investigation SQL Server uses System Base Tables to save the password hashes of logins and contained database users. For logins it uses sys.sysxlgns, whereas for contained database users it leverages sys.sysowners. I’ll show you what I do to figure this stuff out: I create a login/contained user, and then I immediately browse the transaction log with, for example, fn_dblog. It’s pretty obvious that only two base tables touched by the operation are sys.sysxlgns, and also sys.sysprivs – the latter is used to track permissions. If I connect to the DAC on my instance, I can query for the password hash of this login I’ve just created. A few interesting things about this hash. This was taken on my laptop, and I happen to be running SQL Server 2014 RTM CU2, which is the latest public build of SQL Server 2014 as of time of writing. In 2008 R2 and prior versions (back to 2000), the password hashes would start with 0x0100. The reason why this changed is because starting with SQL Server 2012 password hashes are kept using a SHA512 algorithm, as opposed to SHA-1 (used since 2000) or Snefru (used in 6.5 and 7.0). SHA-1 is nowadays deemed unsafe and is very easy to crack. For regular SQL logins, this information is exposed through the sys.sql_logins catalog view, so there is really no need to connect to the DAC to grab an SID/password hash pair. For contained database users, there is (currently) no method of obtaining SID or password hashes without connecting to the DAC. If we create a contained database user, this is what we get from the transaction log: Note that the System Base Table used in this case is sys.sysowners. sys.sysprivs is used as well, and again this is to track permissions. To query sys.sysowners, you would have to connect to the DAC, as I mentioned previously. And this is what you would get: There are other ways to figure out what SQL Server uses under the hood to store contained database user password hashes, like looking at the execution plan for a query to sys.dm_db_uncontained_entities (Thanks, Robert Davis!) SIDs, Logins, Contained Users, and Why You Care…Or Not. One of the reasons behind the existence of Contained Users was the concept of portability of databases: it is really painful to maintain Server Principals (Logins) synced across most shared-nothing SQL Server HA/DR technologies (Mirroring, Availability Groups, and Log Shipping). Often times you would need the Security Identifier (SID) of these logins to match across instances, and that meant that you had to fetch whatever SID was assigned to the login on the principal instance so you could recreate it on a secondary. With contained users you normally wouldn’t care about SIDs, as the users are always available (and synced, as long as synchronization takes place) across instances. Now you might be presented some particular requirement that might specify that SIDs synced between logins on certain instances and contained database users on other databases. How would you go about creating a contained database user with a specific SID? The answer is that you can’t do it directly, but there’s a little trick that would allow you to do it. Create a login with a specified SID and password hash, create a user for that server principal on a partially contained database, then migrate that user to contained using the system stored procedure sp_user_migrate_to_contained, then drop the login. CREATE LOGIN <login_name> WITH PASSWORD = <password_hash> HASHED, SID = <sid> ; GO USE <partially_contained_db>; GO CREATE USER <user_name> FROM LOGIN <login_name>; GO EXEC sp_migrate_user_to_contained @username = <user_name>, @rename = N’keep_name’, @disablelogin = N‘disable_login’; GO DROP LOGIN <login_name>; GO Here’s how this skeleton would look like in action: And now I have a contained user with a specified SID and password hash. In my example above, I renamed the user after migrated it to contained so that it is, hopefully, easier to understand. Enjoy!

  Read the article

• New Replication, Optimizer and High Availability features in MySQL 5.6.5!

  - by Rob Young

  As the Product Manager for the MySQL database it is always great to announce when the MySQL Engineering team delivers another great product release.  As a field DBA and developer it is even better when that release contains improvements and innovation that I know will help those currently using MySQL for apps that range from modest intranet sites to the most highly trafficked web sites on the web.  That said, it is my pleasure to take my hat off to MySQL Engineering for today's release of the MySQL 5.6.5 Development Milestone Release ("DMR"). The new highlighted features in MySQL 5.6.5 are discussed here: New Self-Healing Replication ClustersThe 5.6.5 DMR improves MySQL Replication by adding Global Transaction Ids and automated utilities for self-healing Replication clusters.  Prior to 5.6.5 this has been somewhat of a pain point for MySQL users with most developing custom solutions or looking to costly, complex third-party solutions for these capabilities.  With 5.6.5 these shackles are all but removed by a solution that is included with the GPL version of the database and supporting GPL tools.  You can learn all about the details of the great, problem solving Replication features in MySQL 5.6 in Mat Keep's Developer Zone article.  New Replication Administration and Failover UtilitiesAs mentioned above, the new Replication features, Global Transaction Ids specifically, are now supported by a set of automated GPL utilities that leverage the new GTIDs to provide administration and manual or auto failover to the most up to date slave (that is the default, but user configurable if needed) in the event of a master failure. The new utilities, along with links to Engineering related blogs, are discussed in detail in the DevZone Article noted above. Better Query Optimization and ThroughputThe MySQL Optimizer team continues to amaze with the latest round of improvements in 5.6.5. Along with much refactoring of the legacy code base, the Optimizer team has improved complex query optimization and throughput by adding these functional improvements: Subquery Optimizations - Subqueries are now included in the Optimizer path for runtime optimization.  Better throughput of nested queries enables application developers to simplify and consolidate multiple queries and result sets into a single unit or work. Optimizer now uses CURRENT_TIMESTAMP as default for DATETIME columns - For simplification, this eliminates the need for application developers to assign this value when a column of this type is blank by default. Optimizations for Range based queries - Optimizer now uses ready statistics vs Index based scans for queries with multiple range values. Optimizations for queries using filesort and ORDER BY.  Optimization criteria/decision on execution method is done now at optimization vs parsing stage. Print EXPLAIN in JSON format for hierarchical readability and Enterprise tool consumption. You can learn the details about these new features as well all of the Optimizer based improvements in MySQL 5.6 by following the Optimizer team blog. You can download and try the MySQL 5.6.5 DMR here. (look under "Development Releases")  Please let us know what you think!  The new HA utilities for Replication Administration and Failover are available as part of the MySQL Workbench Community Edition, which you can download here .Also New in MySQL LabsAs has become our tradition when announcing DMRs we also like to provide "Early Access" development features to the MySQL Community via the MySQL Labs.  Today is no exception as we are also releasing the following to Labs for you to download, try and let us know your thoughts on where we need to improve:InnoDB Online OperationsMySQL 5.6 now provides Online ADD Index, FK Drop and Online Column RENAME.  These operations are non-blocking and will continue to evolve in future DMRs.  You can learn the grainy details by following John Russell's blog.InnoDB data access via Memcached API ("NotOnlySQL") - Improved refresh of an earlier feature releaseSimilar to Cluster 7.2, MySQL 5.6 provides direct NotOnlySQL access to InnoDB data via the familiar Memcached API. This provides the ultimate in flexibility for developers who need fast, simple key/value access and complex query support commingled within their applications.Improved Transactional Performance, ScaleThe InnoDB Engineering team has once again under promised and over delivered in the area of improved performance and scale.  These improvements are also included in the aggregated Spring 2012 labs release:InnoDB CPU cache performance improvements for modern, multi-core/CPU systems show great promise with internal tests showing:    2x throughput improvement for read only activity 6x throughput improvement for SELECT range Read/Write benchmarks are in progress More details on the above are available here. You can download all of the above in an aggregated "InnoDB 2012 Spring Labs Release" binary from the MySQL Labs. You can also learn more about these improvements and about related fixes to mysys mutex and hash sort by checking out the InnoDB team blog.MySQL 5.6.5 is another installment in what we believe will be the best release of the MySQL database ever.  It also serves as a shining example of how the MySQL Engineering team at Oracle leads in MySQL innovation.You can get the overall Oracle message on the MySQL 5.6.5 DMR and Early Access labs features here. As always, thanks for your continued support of MySQL, the #1 open source database on the planet!

  Read the article

• Solaris 11 Live CD alapú telepítés

  - by AndrasF

  Az elozo részben megigért két telepítési eljárás helyett kénytelen vagyok ebben a bejegyzésben kizárólag a Live CD-s változattal foglalkozni. Korábban nem gondoltam, hogy ennek bemutatása is több, mint 50 képernyo kimenetet igényel, ezért változtatnom kellett a korábbi tervezeten. A Solaris 11 Live CD-s telepítés elsosorban az asztali (desktop) felhasználók igényeit veszi figyelembe és kizárólag x86-os architektúrájú gépeken támogatott (annak ellenére, hogy SPARC-os rendszerek is rendelkeznek grafikus kártyával - pl. T4-1).A folyamat két részre bontható: eloször a vendéggép kerül kialakítása VirtualBox környezetben, majd ezt követi a Solaris 11-es telepítése virtuális gépre. HCL és segédprogramok (DDT, DDU) Mielott telepíteni szeretnénk a Solaris operációs rendszert, célszeru tájékozódni fizikai rendszerünk támogatottságáról. Erre jól használható a már említett hardver kompatibilitási (HCL) lista, vagy az alábbi két segédprogram: Device Detection Tool Device Driver Utility Mindkét alkalmazás képes rendszerünk hardver komponenseit feltérképezni és ellenorizni azok meghajtóprogram (driver) ellátottságát. Eltérés köztük abban nyilvánul meg, hogy míg a DDT futtatásához Java szükséges, addig a DDU Solarist igényel. Ez utóbbiról a telepítés során röviden szó fog esni. Telepíto készletek letöltési helye Hálózati installációtól eltekintve (*) telepítokészletre van szükségünk, mely az alábbi oldalról töltheto le. Célszeru letöltenünk mindhárom állományt és a csomagokat tartalmazó ún. repository médiát (a következo felsorolás utolsó eleme) is: sol-11-1111-live-x86.iso sol-11-1111-text-x86.iso sol-11-1111-ai-x86.iso sol-11-1111-repo-full.iso Az elso három változat indítható USB formátumban is rendelkezésre áll - ekkor iso végzodés helyett usb található a fájlnevek végén. Rövid utalást az egyes készletek feladatáról az elozo blog bejegyzés tartalmaz (link). Amennyiben SPARC architektúrájú rendszerre szeretnénk a telepítést végezni, 'x86' helyett a 'sparc' szöveget tartalmazó állományokra lesz szükség. (*) - arra is lehetoség van, hogy AI készletrol történo indítás segítségével végezzük a hálózaton keresztül történo telepítést. Ez akkor fontos, ha célgépünkön nincs PXE (Preboot Execution Environment) boot támogatás. VirtualBox konfigurálás Külön fizikai eszköz felhasználása nélkül virtuális környezetben is használható a Solaris 11, mint vendéggép. A VirtualBox használatával erre kényelmes lehetoség kínálkozik. Gazdagépünknek (Windows, Unix, Linux) megfelelo telepíto program, vagy programcsomag (jelenleg a 4.1.16-os verzió a legfrissebb változat) és az installációt is taglaló felhasználói kézikönyv letöltheto a termék oldaláról. A sikeres telepítést követoen az alábbi lépések során jutunk el az új virtuális gép kialakulásáig: 1. A VBox indítása után a központi ablak megmutatja a már létezo virtuális gépeinket (Sol11demo, Sol11u1b07, Sol11.1B16, Sun_ZFS_Storage_7000) és az aktuálisan kiválasztott egyed (Sol11demo) fobb jellemzoit (megnevezés, memória mérete, virtuális tároló eszközök listája...stb.) 2. A New gombra kattintva elindul a virtuális gépet létrehozó segéd (wizard) 3. Ezt követoen nevet kell adnunk a vendéggépnek és ki kell választanunk az operációs rendszer típusát (beszédes név használata esetén a VirtualBox képes az operációs rendszer családját kiválasztani, nekünk pusztán csak verziót kell beállítanunk): adjuk meg Solaris11-et névként és válasszuk a 64bites változatot (feltéve, hogy gazdagépünk támogatja ezt) 4. Telepítéshez és a kezdeti lépések megtételéhez 1536MB memória tökéletesen megfelel (ez késobb módosítható az elvárások függvényében) 5. Fizikai társaihoz hasonlóan, egyetlen virtuális gép sem létezhet merevlemez (jelen esetben virtuális diszk) nélkül. Használhatunk egy már létezo területet (virtuális lemezt tartalmazó állomány), de létrehozhatunk egy nekünk tetszo új példányt is. Maradjunk ez utóbbinál (Create new hard disk)! 6. A lehetséges formátumok közül - az egyszeruség okán - éljünk a felkínált alaptípussal (VDI - VirtualBox Disk Image). 7. Létrehozás során a virtuális lemez készülhet egyidejuleg (Fixed size), vagy több lépésben dinamikusan (Dynamically allocated). Az elso változat sokkal kevésbé terheli a rendszert, a második elonye pedig a helytakarékosság. Válasszuk a fix méretu változatot. 8. Most már csak egyetlen adat ismeretlen a VirtualBox számára, mégpedig a létrehozásra kerülo virtuális lemez nagysága. 8GB-os terület jelen esetben alkalmas az ismerkedés elkezdéséhez. 9. Amennyiben minden beállítást helyesen adtunk meg, a Create gomb megnyomása után elindul a virtuális lemez létrehozása. 10. Ez a muvelet a megadott adatoktól függoen néhány perc alatt befejezodik. 11. Hasonló megerosítés (Create gomb aktiválása) után elkezdodik a kért virtuális gép létrehozása is. 12. Sikeres végrehajtás után az új vitruális gép közvetlenül megjelenik a központi ablak baloldali listáján a rendelkezésre álló virtuális gépek közt. A blog bejegyzés folyamatosan frissül...a rész fennmaradó tartalma hamarosan felkerül az oldalra.

  Read the article

• How to Achieve Real-Time Data Protection and Availabilty....For Real

  - by JoeMeeks

  There is a class of business and mission critical applications where downtime or data loss have substantial negative impact on revenue, customer service, reputation, cost, etc. Because the Oracle Database is used extensively to provide reliable performance and availability for this class of application, it also provides an integrated set of capabilities for real-time data protection and availability. Active Data Guard, depicted in the figure below, is the cornerstone for accomplishing these objectives because it provides the absolute best real-time data protection and availability for the Oracle Database. This is a bold statement, but it is supported by the facts. It isn’t so much that alternative solutions are bad, it’s just that their architectures prevent them from achieving the same levels of data protection, availability, simplicity, and asset utilization provided by Active Data Guard. Let’s explore further. Backups are the most popular method used to protect data and are an essential best practice for every database. Not surprisingly, Oracle Recovery Manager (RMAN) is one of the most commonly used features of the Oracle Database. But comparing Active Data Guard to backups is like comparing apples to motorcycles. Active Data Guard uses a hot (open read-only), synchronized copy of the production database to provide real-time data protection and HA. In contrast, a restore from backup takes time and often has many moving parts - people, processes, software and systems – that can create a level of uncertainty during an outage that critical applications can’t afford. This is why backups play a secondary role for your most critical databases by complementing real-time solutions that can provide both data protection and availability. Before Data Guard, enterprises used storage remote-mirroring for real-time data protection and availability. Remote-mirroring is a sophisticated storage technology promoted as a generic infrastructure solution that makes a simple promise – whatever is written to a primary volume will also be written to the mirrored volume at a remote site. Keeping this promise is also what causes data loss and downtime when the data written to primary volumes is corrupt – the same corruption is faithfully mirrored to the remote volume making both copies unusable. This happens because remote-mirroring is a generic process. It has no  intrinsic knowledge of Oracle data structures to enable advanced protection, nor can it perform independent Oracle validation BEFORE changes are applied to the remote copy. There is also nothing to prevent human error (e.g. a storage admin accidentally deleting critical files) from also impacting the remote mirrored copy. Remote-mirroring tricks users by creating a false impression that there are two separate copies of the Oracle Database. In truth; while remote-mirroring maintains two copies of the data on different volumes, both are part of a single closely coupled system. Not only will remote-mirroring propagate corruptions and administrative errors, but the changes applied to the mirrored volume are a result of the same Oracle code path that applied the change to the source volume. There is no isolation, either from a storage mirroring perspective or from an Oracle software perspective.  Bottom line, storage remote-mirroring lacks both the smarts and isolation level necessary to provide true data protection. Active Data Guard offers much more than storage remote-mirroring when your objective is protecting your enterprise from downtime and data loss. Like remote-mirroring, an Active Data Guard replica is an exact block for block copy of the primary. Unlike remote-mirroring, an Active Data Guard replica is NOT a tightly coupled copy of the source volumes - it is a completely independent Oracle Database. Active Data Guard’s inherent knowledge of Oracle data block and redo structures enables a separate Oracle Database using a different Oracle code path than the primary to use the full complement of Oracle data validation methods before changes are applied to the synchronized copy. These include: physical check sum, logical intra-block checking, lost write validation, and automatic block repair. The figure below illustrates the stark difference between the knowledge that remote-mirroring can discern from an Oracle data block and what Active Data Guard can discern. An Active Data Guard standby also provides a range of additional services enabled by the fact that it is a running Oracle Database - not just a mirrored copy of data files. An Active Data Guard standby database can be open read-only while it is synchronizing with the primary. This enables read-only workloads to be offloaded from the primary system and run on the active standby - boosting performance by utilizing all assets. An Active Data Guard standby can also be used to implement many types of system and database maintenance in rolling fashion. Maintenance and upgrades are first implemented on the standby while production runs unaffected at the primary. After the primary and standby are synchronized and all changes have been validated, the production workload is quickly switched to the standby. The only downtime is the time required for user connections to transfer from one system to the next. These capabilities further expand the expectations of availability offered by a data protection solution beyond what is possible to do using storage remote-mirroring. So don’t be fooled by appearances.  Storage remote-mirroring and Active Data Guard replication may look similar on the surface - but the devil is in the details. Only Active Data Guard has the smarts, the isolation, and the simplicity, to provide the best data protection and availability for the Oracle Database. Stay tuned for future blog posts that dive into the many differences between storage remote-mirroring and Active Data Guard along the dimensions of data protection, data availability, cost, asset utilization and return on investment. For additional information on Active Data Guard, see: Active Data Guard Technical White Paper Active Data Guard vs Storage Remote-Mirroring Active Data Guard Home Page on the Oracle Technology Network

  Read the article

• In Social Relationship Management, the Spirit is Willing, but Execution is Weak

  - by Mike Stiles

  In our final talk in this series with Aberdeen’s Trip Kucera, we wanted to find out if enterprise organizations are actually doing anything about what they’re learning around the importance of communicating via social and using social listening for a deeper understanding of customers and prospects. We found out that if your brand is lagging behind, you’re not alone. Spotlight: How was Aberdeen able to find out if companies are putting their money where their mouth is when it comes to implementing social across the enterprise? Trip: One way to think about the relative challenges a business has in a given area is to look at the gap between “say” and “do.” The first of those words reveals the brand’s priorities, while the second reveals their ability to execute on those priorities. In Aberdeen’s research, we capture this by asking firms to rank the value of a set of activities from one on the low end to five on the high end. We then ask them to rank their ability to execute those same activities, again on a one to five, not effective to highly effective scale. Spotlight: And once you get their self-assessments, what is it you’re looking for? Trip: There are two things we’re looking for in this analysis. The first is we want to be able to identify the widest gaps between perception of value and execution. This suggests impediments to adoption or simply a high level of challenge, be it technical or otherwise. It may also suggest areas where we can expect future investment and innovation. Spotlight: So the biggest potential pain points surface, places where they know something is critical but also know they aren’t doing much about it. What’s the second thing you look for? Trip: The second thing we want to do is look at specific areas in which high-performing companies, the Leaders, are out-executing the Followers. This points to the business impact of these activities since Leaders are defined by a set of business performance metrics. Put another way, we’re correlating adoption of specific business competencies with performance, looking for what high-performers do differently. Spotlight: Ah ha, that tells us what steps the winners are taking that are making them winners. So what did you find out? Trip: Generally speaking, we see something of a glass curtain when it comes to the social relationship management execution gap. There isn’t a single social media activity in which more than 50% of respondents indicated effectiveness, which would be a 4 or 5 on that 1-5 scale. This despite the fact that 70% of firms indicate that generating positive social media mentions is valuable or very valuable, a 4 or 5 on our 1-5 scale. Spotlight: Well at least they get points for being honest. The verdict they’re giving themselves is that they just aren’t cutting it in these highly critical social development areas. Trip: And the widest gap is around directly engaging with customers and/or prospects on social networks, which 69% of firms rated as valuable but only 34% of companies say they are executing well. Perhaps even more interesting is that these two are interdependent since you’re most likely to generate goodwill on social through happy, engaged customers. This data also suggests that social is largely being used as a broadcast channel rather than for one-to-one engagement. As we’ve discussed previously, social is an inherently personal media. Spotlight: And if they’re still using it as a broadcast channel, that shows they still fail to understand the root of social and see it as just another outlet for their ads and push-messaging. That’s depressing. Trip: A second way to evaluate this data is by using Aberdeen’s performance benchmarking. The story is both a bit different, but consistent in its own way. The first thing we notice is that Leaders are more effective in their execution of several key social relationship management capabilities, namely generating positive mentions and engaging with “influencers” and customers. Based on the fact that Aberdeen uses a broad set of performance metrics to rank the respondents as either “Leaders” (top 35% in weighted performance) or “Followers” (bottom 65% in weighted performance), from website conversion to annual revenue growth, we can then correlated high social effectiveness with company performance. We can also connect the specific social capabilities used by Leaders with effectiveness. We spoke about a few of those key capabilities last time and also discuss them in a new report: Social Powers Activate: Engineering Social Engagement to Win the Hidden Sales Cycle. Spotlight: What all that tells me is there are rewards for making the effort and getting it right. That’s how you become a Leader. Trip: But there’s another part of the story, which is that overall effectiveness, even among Leaders, is muted. There’s just one activity in which more than a majority of Leaders cite high effectiveness, effectiveness being the generation of positive buzz. While 80% of Leaders indicate “directly engaging with customers” through social media channels is valuable, the highest rated activity among Leaders, only 42% say they’re effective. This gap even among Leaders shows the challenges still involved in effective social relationship management. @mikestilesPhoto: stock.xchng

  Read the article

• ????: PostgreSQL??Oracle RAC????

  - by Kumiko Fujita

  ?????????????????????????????????????????????????????????????????????????? ????????????????????????? * * * ?????????????????????????????????????DBMS??????????????????????????????DBMS????????????????????????????????????????????? 1. ???? ?????????????????????????????????????????????????????????????????????1?????? ???????????????? ?????????????????????????????DB???????OSS?PostgreSQL?????AP?????DB??????????????????? ???????? ?????10?????????????GB????????????????????????????DB?????????????????????????? ?????????????3,500?????????24????????????????????????????????????? ??AP?????????????????????????????????????????DB??PostgreSQL??????????????????PostgreSQL ????????????????????Vacuum????????????????????????????????????????????????????? ??????????????????PostgreSQL?OSS??????????????????????????????????????????????????DB MS??????Oracle Database 11gR2???????????????????????500GB???????????????????????????Partitioning ???????? Oracle Database Enterprise Edition?????????????????????????????????????????????? ????SAN?????Active/Standby???HA????????????????? 2. ????? 2.1. ???? PostgreSQL??????Oracle??????????????????????????????????????????????????????TEXT????? ????????????????????Oracle??????????????????????????PostgreSQL??csv???????Oracle Database?SQL*Loa der????????????? ??????????????????????????????DB??????????????Windows?Liunx??????????????????????? ????????????????????????????????????????????????? ?????????????PostgreSQL?NULL?????''????????????Oracle Database???????????????????????? ?????????? table { border-collapse: collapse; } th { border: solid 1px #666666; color: #000000; background-color: #ff9999; } td { border: solid 1px #666666; color: #000000; background-color: #ffffff; } ???? PostgreSQL Oracle Database ??? CHAR(n) CHAR(n),CLOB VARCHAR(n) VARCHAR2(n),CLOB TEXT CLOB ??? NUMERIC NUMBER INTEGER NUMBER SMALLINT NUMBER BIGINT NUMBER REAL NUMBER DOUBLE PRECISION NUMBER ??? DATE DATE TIMESTAMP TIMESTAMP ????? Bytea BLOB LOB BFILE/SecureFiles ??? OID ROWID 2.2. ????? ?????????????PostgreSQL?Oracle Database??????????SQL???????????????????????????????????Postg reSQL?LIMIT?OFFSET??Oracle Database?????????????????????? LIMIT,OFFSET???SELECT?????? /* PostgreSQL LIMIT,OFFSET */ SELECT ??? FROM ????? ORDER BY ???? LIMIT 2 OFFSET 5; /* Oracle Database????? */ SELECT ??? FROM (SELECT ???, ROWNUM line_no FROM (SELECT??? FROM ????? OREDR BY ???? ) ) WHERE line_no BETWEEN 6 AND 7; ??????????????????????????????????????????????????????????????????????????? ?????????????????? ????????????????????????????????????????????????Oracle Database??????????????????????Oracle Database????WHERE??????????????????????????????????????????????????????WHERE?????????????????????? 3. ???? ???????????????????????30%~40%????????????????????80%????????????????????? ?ITpro???:???????4????? ??????????????????????????????????? ·?????·??????????????????????????? ·????????????????????????????? ????????????????????????????????????????? 3.1. ??????? ????????????????????????????????????????·??????????????????????????????????? ???????????????????????????????????????????????????????·?????????????????? ???????????????????????????? (1)???????????????????? (2)???????????????????????????????????????????? (3)??????????????? (4)???????????????????????????????? ???????????·???????????????????????????????????????????????????????????????? ????????????????????? ????????·?? table { border-collapse: collapse; } th { border: solid 1px #666666; color: #000000; background-color: #ff9999; } td { border: solid 1px #666666; color: #000000; background-color: #ffffff; } ?? ?? ?? (1) ?????????? ????????????·???????????????????????? (2) ???????????????????? ?????????????????????????????? (3) ?????4????????????????? ???????????????????????DB????????? (4) ??????????(3)???????? ???????????????????????? ?????????????????????GB???????????????????????????????????????????(3)?????????? ??????? ??????????????????????????????????????????????csv??????????SQL*Loader?Oracle Database?????????????????????Oracle Database???????????????????????????INSERT????????????? ???????????????????????????????????????????????????????????????????????????? ?????????????????????? 3.2. ????? ???????????????????????????????????????????????????????????????????????????? ????????????????????????????????????????????????????????????????????????????????????????????? ?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? 3.3. ????? ??????????????????????????????????????????????????????????????????????????? ??????????????????????? DBMS????????????????????????SQL??????????????????????????????????????????????????PostgreSQL?Oracle Database???????????MVCC?????????????????????????Read Committed??????????????????????????????????????????????????????????????????????????????????? ????????????????DBMS?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? 4. ??? PostgreSQL??Oracle Database?????????????????????????????? ????????????·????????????????????????????????????? ??????4???????????????????????·??????????????????? ???????????????????????????????????????????????? ?????????????????????????????????????????????DBMS???????????????????DBMS???????? ?????SQL?????????????????????????????DB???????????????????????????? ???????????????????????????DBMS?????????????????????????????????????????????????????? ??????????????????????????????

  Read the article

• Could not import Django settings into Google App Engine

  - by gkelsall

  Hello all you Google App Engine experts, I have used Django a little before but am new to Google App Engine and am trying to use it's development web server with Django for the first time. I don't know if this is relevent but I previously had Django 1.1 and Python 2.6 on my Windows XP and even though I have uninstalled Python 2.6 there is still a folder and entries in the registry. I have followed the instructions from Google but when I browse to the GAE developemnt web server it cannot find my settings (details below). Any hints gratefully received. Regards Geoff C:\Documents and Settings\GeoffK\My Documents\ing\ingsite>echo %PATH% C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS \system32\WindowsPowerShell\v1.0;;C:\Python25;C:\Python25\Lib\site- packages\django\bin;C:\Documents and Settings\GeoffK\My Documents\ing \ingsite;C:\Program Files\Google\google_appengine\ C:\Documents and Settings\GeoffK\My Documents\ing\ingsite>echo %PYTHONPATH% C:\Documents and Settings\GeoffK\My Documents\ing\ingsite C:\Documents and Settings\GeoffK\My Documents\ing\ingsite>C:\Documents and Settings\GeoffK\My Documents\ing\ingsite>dev_appserver.py -- debug_imports ingiliz\ INFO 2009-08-04 07:29:45,328 appengine_rpc.py:157] Server: appengine.google. com INFO 2009-08-04 07:29:45,358 appcfg.py:322] Checking for updates to the SDK. INFO 2009-08-04 07:29:45,578 appcfg.py:336] The SDK is up to date. WARNING 2009-08-04 07:29:45,578 datastore_file_stub.py:404] Could not read data store data from c:\docume~1\geoffk\locals~1\temp \dev_appserver.datastore WARNING 2009-08-04 07:29:45,578 datastore_file_stub.py:404] Could not read data store data from c:\docume~1\geoffk\locals~1\temp \dev_appserver.datastore.history WARNING 2009-08-04 07:29:45,608 dev_appserver.py:3296] Could not initialize ima ges API; you are likely missing the Python "PIL" module. ImportError: No module named _imaging INFO 2009-08-04 07:29:45,625 dev_appserver_main.py:465] Running application ingiliz on port 8080: http://localhost:8080 ..... Now attempting to browse if need more detail here I can post ..... if not settings.DATABASE_ENGINE: File "C:\Python25\lib\site-packages\django\conf\__init__.py", line 28, in __ge tattr__ self._import_settings() File "C:\Python25\lib\site-packages\django\conf\__init__.py", line 59, in _imp ort_settings self._target = Settings(settings_module) File "C:\Python25\lib\site-packages\django\conf\__init__.py", line 94, in __in it__ raise ImportError, "Could not import settings '%s' (Is it on sys.path? Does it have syntax errors?): %s" % (self.SETTINGS_MODULE, e) ImportError: Could not import settings 'settings' (Is it on sys.path? Does it ha ve syntax errors?): No module named settings INFO 2009-08-04 07:31:02,187 dev_appserver.py:2982] "GET / HTTP/ 1.1" 500 -

  Read the article

• How do HttpOnly cookies work with AJAX requests?

  - by Shawn Simon

  JavaScript needs access to cookies if AJAX is used on a site with access restrictions based on cookies. Will HttpOnly cookies work on an AJAX site? Edit: Microsoft created a way to prevent XSS attacks by disallowing JavaScript access to cookies if HttpOnly is specified. FireFox later adopted this. So my question is: If you are using AJAX on a site, like StackOverflow, are Http-Only cookies an option? Edit 2: Question 2. If the purpose of HttpOnly is to prevent JavaScript access to cookies, and you can still retrieve the cookies via JavaScript through the XmlHttpRequest Object, what is the point of HttpOnly? Edit 3: Here is a quote from Wikipedia: When the browser receives such a cookie, it is supposed to use it as usual in the following HTTP exchanges, but not to make it visible to client-side scripts.[32] The HttpOnly flag is not part of any standard, and is not implemented in all browsers. Note that there is currently no prevention of reading or writing the session cookie via a XMLHTTPRequest. [33]. I understand that document.cookie is blocked when you use HttpOnly. But it seems that you can still read cookie values in the XMLHttpRequest object, allowing for XSS. How does HttpOnly make you any safer than? By making cookies essentially read only? In your example, I cannot write to your document.cookie, but I can still steal your cookie and post it to my domain using the XMLHttpRequest object. <script type="text/javascript"> var req = null; try { req = new XMLHttpRequest(); } catch(e) {} if (!req) try { req = new ActiveXObject("Msxml2.XMLHTTP"); } catch(e) {} if (!req) try { req = new ActiveXObject("Microsoft.XMLHTTP"); } catch(e) {} req.open('GET', 'http://beta.stackoverflow.com/', false); req.send(null); alert(req.getAllResponseHeaders()); </script> Edit 4: Sorry, I meant that you could send the XMLHttpRequest to the StackOverflow domain, and then save the result of getAllResponseHeaders() to a string, regex out the cookie, and then post that to an external domain. It appears that Wikipedia and ha.ckers concur with me on this one, but I would love be re-educated... Final Edit: Ahh, apparently both sites are wrong, this is actually a bug in FireFox. IE6 & 7 are actually the only browsers that currently fully support HttpOnly. To reiterate everything I've learned: HttpOnly restricts all access to document.cookie in IE7 & and FireFox (not sure about other browsers) HttpOnly removes cookie information from the response headers in XMLHttpObject.getAllResponseHeaders() in IE7. XMLHttpObjects may only be submitted to the domain they originated from, so there is no cross-domain posting of the cookies. edit: This information is likely no longer up to date.

  Read the article

• glassfish v3.0 hangs no app is ever deployed and no error is ever shown

  - by Samuel Lopez

  I have a web app that uses JSF 2.0 with richFaces and primeFaces, hibernate and java and I use NetBeans 7.1.2 as the IDE when I run the app the glassfish server is started and the log shows this: Launching GlassFish on Felix platform Información: Running GlassFish Version: GlassFish Server Open Source Edition 3.1.2 (build 23) Información: Grizzly Framework 1.9.46 started in: 20ms - bound to [0.0.0.0:4848] Información: Grizzly Framework 1.9.46 started in: 32ms - bound to [0.0.0.0:8181] Información: Grizzly Framework 1.9.46 started in: 59ms - bound to [0.0.0.0:8080] Información: Grizzly Framework 1.9.46 started in: 32ms - bound to [0.0.0.0:3700] Información: Grizzly Framework 1.9.46 started in: 21ms - bound to [0.0.0.0:7676] Información: Registered org.glassfish.ha.store.adapter.cache.ShoalBackingStoreProxy for persistence-type = replicated in BackingStoreFactoryRegistry Información: SEC1002: Security Manager is OFF. Información: SEC1010: Entering Security Startup Service Información: SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper. Información: SEC1115: Realm [admin-realm] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created. Información: SEC1115: Realm [file] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created. Información: SEC1115: Realm [certificate] of classtype [com.sun.enterprise.security.auth.realm.certificate.CertificateRealm] successfully created. Información: SEC1011: Security Service(s) Started Successfully Información: WEB0169: Created HTTP listener [http-listener-1] on host/port [0.0.0.0:8080] Información: WEB0169: Created HTTP listener [http-listener-2] on host/port [0.0.0.0:8181] Información: WEB0169: Created HTTP listener [admin-listener] on host/port [0.0.0.0:4848] Información: WEB0171: Created virtual server [server] Información: WEB0171: Created virtual server [__asadmin] Información: WEB0172: Virtual server [server] loaded default web module [] Información: Inicializando Mojarra 2.1.6 (SNAPSHOT 20111206) para el contexto '/test' Información: Hibernate Validator 4.2.0.Final Información: WEB0671: Loading application [test] at [/test] Información: CORE10010: Loading application test done in 4,885 ms Información: GlassFish Server Open Source Edition 3.1.2 (23) startup time : Felix (1,848ms), startup services(5,600ms), total(7,448ms) Información: JMX005: JMXStartupService had Started JMXConnector on JMXService URL service:jmx:rmi://SJ007:8686/jndi/rmi://SJ007:8686/jmxrmi Información: WEB0169: Created HTTP listener [http-listener-1] on host/port [0.0.0.0:8080] Información: Grizzly Framework 1.9.46 started in: 14ms - bound to [0.0.0.0:8080] Información: WEB0169: Created HTTP listener [http-listener-2] on host/port [0.0.0.0:8181] Información: Grizzly Framework 1.9.46 started in: 12ms - bound to [0.0.0.0:8181] but right there it hangs and the deploy bar keeps running but no more actions are shown, nothing else is logged either it just stays there until I stop the deploy Is there any other error log to debug glassfish server? Any thoughts? I have re installed glassfish and NetBeans but it all seems the same. I think this started happening after I had to force-restart my computer with NetBeans stil open and the app deployed, but it's hard to know for sure if this was the real catalyst. Any thoughts or help is appreciated thanks. Is it an app error? if so why no errors in the log are shown?

  Read the article

• Delaying emails in PHP to avoid exceeding server limit

  - by Andrew P.

  Okay, so here's my problem: I have a list of members on a website, and periodically one of the admins my site (who are not very web or tech savvy) will send a newsletter to the memberlist. My current memberlist is well over 800 individuals long. So, I wrote an email script that sends the email to the full memberlist, with the members listed in the Bcc header. However, I've discovered that my host server has a limit of 300 emails per hour, which I apparently exceed even though the members are listed in the Bcc field. (I wasn't previously aware that the behaviour of Bcc was to send separate emails for each name on the list...) After some thought, I've come to the conclusion that my only solution is to have my script send only the email to only the first 300 emails, wait an hour, and send a second email to the next three hundred, wait another hour, and so on until I've sent the email to the whole member list. Looking around on the internet, I've seen some other solutions people have come up with for delaying emails in PHP. Sleep() is obviously not an option, because I can't just leave the script open and running for 3 or four hours. I've seen some people suggest cron jobs, but I'm not sure how feasible it would be to create three new cron jobs every time I send an email, use them once, and then delete them afterward. The final (and what I think is the smartest) solution I've seen, is to have a table in my database to temporarily store the emails to be delayed and sent later, and then create a cron job that checks this sql table every hour or so, compares the timestamp of the row to the current timestamp, and then sends the email if an hour has passed. So I'm asking you all which method you would recommend. Is there an easier solution that I've completely looked over (aside from getting a different hosting plan. ha!), or is there a cleaner way to do it than the database / cron job approach? tl;dr: I have 800 emails to send in an hour on a server that limits me to 300/hr. Using PHP, find a way to get around this problem in a way that the person sending the email needs only to click "send."

  Read the article

• Armchair Linguists: 'code' vs. 'codes'--or why I write 'code' and my manager asks for 'codes'

  - by Ukko

  I wanted to tap into the collective wisdom here to see if I can get some insight into one of my pet peeves, people who thread "code" as a countable noun. Let me also preface this by saying that I am not talking about anyone who speaks english as a second language, this is a native phenomenon. For those of us who slept through grammar class there are two classes of nouns which basically refer to things that are countable and non-countable (sometimes referred to as count and noncount). For instance 'sand' is a non-count noun and 'apple' is count. You can talk about "two apples" but "two sands" does not parse. The bright students then would point out a word like "beer" where is looks like this is violated. Beer as a substance is certainly a non-count noun, but I can ask for "two beers" without offending the grammar police. The reason is that there are actually two words tied up in that one utterance, Definition #1 is a yummy golden substance and Definition #2 is a colloquial term for a container of said substance. #1 is non-count and #2 is countable. This gets to my problem with "codes" as a countable noun. In my mind the code that we programmers write is non-count, "I wrote some code today." When used in the plural like "Have you got the codes" I can only assume that you are asking if I have the cryptographically significant numbers for launching a missile or the like. Every time my peer in marketing asks about when we will have the new codes ready I have a vision of rooms of code breakers going over the latest Enigma coded message. I corrected the usage in all the documents I am asked to review, but then I noticed that our customer was also using the work "codes" when they meant "code". At this point I have realized that there is a significant sub-population that uses "codes" and they seem to be impervious to what I see as the dominant "correct" usage. This is the part I want some help on, has anyone else noticed this phenomenon? Do you know what group it is associated with, old Fortran programmer perhaps? Is it a regionalism? I have become quick to change my terms when I notice a customer's usage, but it would be nice to know if I am sending a proposal somewhere what style they expect. I would hate to get canned with a review of "Ha, these guy's must be morons they don't even know 'code' is plural!"

  Read the article

• php paypal ipn membership error

  - by aleksander haugas

  hello I integrated the membership subscription in the website, but I fail to insert data to the database. checking out all the function I make a txt file with php with data and generates me correctly. but I can not verify any data and less insert. <?php // read the post from PayPal system and add 'cmd' $req = 'cmd=_notify-validate'; foreach ($_POST as $key => $value) { $value = urlencode(stripslashes($value)); $req .= "&$key=$value"; } // Post back to PayPal system to validate $header .= "POST /cgi-bin/webscr HTTP/1.0\r\n"; $header .= "Content-Type: application/x-www-form-urlencoded\r\n"; $header .= "Content-Length: " . strlen($req) . "\r\n\r\n"; $fp = fsockopen ('ssl://www.paypal.com', 443, $errno, $errstr, 30); // Assign posted variables to local variables $item_name = $_POST['item_name']; $item_number = $_POST['item_number']; $payment_status = $_POST['payment_status']; $payment_amount = $_POST['mc_gross']; $payment_currency = $_POST['mc_currency']; $txn_id = $_POST['txn_id']; $receiver_email = $_POST['receiver_email']; $payer_email = $_POST['payer_email']; $user_id = $_POST['custom']; //Here i make the txt file and it works correctly //but after this does not work or make a txt file //Insert and update data if (!$fp) { // HTTP ERROR } else { fputs ($fp, $header . $req); while (!feof($fp)) { $res = fgets ($fp, 1024); if (strcmp ($res, "VERIFIED") == 0) { //Verificamos el estado del pedido if ($payment_status == 'Completed') { $txn_id_check = mysql_query("SELECT Transaction_ID FROM ".$db_table_prefix."Users_Payments WHERE Transaction_ID='".$txn_id."'"); if (mysql_num_rows($txn_id_check) !=1) { //Si el pago se ha realizado al dueño especificado y coincide con el dueño if ($receiver_email == $website_Payment_Email) { //Tipo de cuenta segun pagado if ($payment_amount == '10.00' && $payment_currency == 'EUR') { //add txn_id to database $log_query = mysql_query("INSERT INTO `".$db_table_prefix."Users_Payments` VALUES ('','".$txn_id."','".$payer_email."')"); //update premium to 3 $update_premium = mysql_query("UPDATE ".$db_table_prefix."Users SET Group_ID='3' WHERE User_ID='".$user_id."'"); } } } } } else if (strcmp ($res, "INVALID") == 0) { // log for manual investigation } } fclose ($fp); } ?> I call this file with require_once () with the connection to the database any ideas? thanks

  Read the article

• Change the Session Variable Output

  - by user567230

  Hello I am using Dreamweaver CS5 with Coldfusion 9 to build a dynamic website. I have a MS Access Database that stores login information which includes ID, FullName, FirstName, LastName, Username, Pawword, AcessLevels. My question is this: I currently have session variable to track the Username when it is entered into the login page. However I would like to use that Username to pull the User's FullName to display throughout the web pages and use for querying data. How do I change the session variable to read that when they are not entering their FullName on the login page but only Username and password. I have listed my login information code below if there is any additional information needed please let me know. This is the path for which the FullName values reside DataSource "Access" Table "Logininfo" Field "FullName" I want the FullName to be unique based on the Username submitted from the Login page. I apologize in advance for any rookie mistake I may have made I am new to this but learning fast! Ha. <cfif IsDefined("FORM.username")> <cfset MM_redirectLoginSuccess="members_page.cfm"> <cfset MM_redirectLoginFailed="sorry.cfm"> <cfquery name="MM_rsUser" datasource="Access"> SELECT FullName, Username,Password,AccessLevels FROM Logininfo WHERE Username=<cfqueryparam value="#FORM.username#" cfsqltype="cf_sql_clob" maxlength="50"> AND Password=<cfqueryparam value="#FORM.password#" cfsqltype="cf_sql_clob" maxlength="50"> </cfquery> <cfif MM_rsUser.RecordCount NEQ 0> <cftry> <cflock scope="Session" timeout="30" type="Exclusive"> <cfset Session.MM_Username=FORM.username> <cfset Session.MM_UserAuthorization=MM_rsUser.AccessLevels[1]> </cflock> <cfif IsDefined("URL.accessdenied") AND false> <cfset MM_redirectLoginSuccess=URL.accessdenied> </cfif> <cflocation url="#MM_redirectLoginSuccess#" addtoken="no"> <cfcatch type="Lock"> <!--- code for handling timeout of cflock ---> </cfcatch> </cftry> </cfif> <cflocation url="#MM_redirectLoginFailed#" addtoken="no"> <cfelse> <cfset MM_LoginAction=CGI.SCRIPT_NAME> <cfif CGI.QUERY_STRING NEQ ""> <cfset MM_LoginAction=MM_LoginAction & "?" & XMLFormat(CGI.QUERY_STRING)> </cfif> </cfif>

  Read the article

• Single-Signon options for Exchange 2010

  - by freiheit

  We're working on a project to migrate employee email from Unix/open-source (courier IMAP, exim, squirrelmail, etc) to Exchange 2010, and trying to figure out options for single-signon for Outlook Web Access. So far all the options I've found are very ugly and "unsupportable", and may simply not work with Forefront. We already have JA-SIG CAS for token-based single-signon and Shibboleth for SAML. Users are directed to a simple in-house portal (a Perl CGI, really) that they use to sign in to most stuff. We have an HA OpenLDAP cluster that's already synchronized against another AD domain and will be synchronized with the AD domain Exchange will be using. CAS authenticates against LDAP. The portal authenticates against CAS. Shibboleth authenticates with CAS but pulls additional data from LDAP. We're moving in the direction of having web services authenticate against CAS or Shibboleth. (Students are already on SAML/Shibboleth authenticated Google Apps for Education) With Squirrelmail we have a horrible hack linked to from that portal page that authenticates against CAS, gets your original plaintext password (yes, I know, evil), and gives you an HTTP form pre-filled with all the necessary squirrelmail login details with javaScript onLoad stuff to immediately submit the form. Trying to find out exactly what is possible with Exchange/OWA seems to be difficult. "CAS" is both the acronym for our single-signon server and an Exchange component. From what I've been able to tell there's an addon for Exchange that does SAML, but only for federating things like free/busy calendar info, not authenticating users. Plus it costs additional money so there's no way to experiment with it to see if it can be coaxed into doing what we want. Our plans for the Exchange cluster involve Forefront Threat Management Gateway (the new ISA) in the DMZ front-ending the CAS servers. So, the real question: Has anybody managed to make Exchange authenticate with CAS (token-based single-signon) or SAML, or with something I can reasonably likely make authenticate with one of those (such as anything that will accept apache's authentication)? With Forefront? Failing that, anybody have some tips on convincing OWA Forms Based Authentication (FBA) into letting us somehow "pre-login" the user? (log in as them and pass back cookies to the user, or giving the user a pre-filled form that autosubmits like we do with squirrelmail). This is the least-favorite option for a number of reasons, but it would (just barely) satisfy our requirements. From what I hear from the guy implementing Forefront, we may have to set OWA to basic authentication and do forms in Forefront for authentication, so it's possible this isn't even possible. I did find CasOwa, but it only mentions Exchange 2007, looks kinda scary, and as near as I can tell is mostly the same OWA FBA hack I was considering slightly more integrated with the CAS server. It also didn't look like many people had had much success with it. And it may not work with Forefront. There's also "CASifying Outlook Web Access 2", but that one scares me, too, and involves setting up a complex proxy config, which seems more likely to break. And, again, doesn't look like it would work with Forefront. Am I missing something with Exchange SAML (OWA Federated whatchamacallit) where it is possible to configure to do user authentication and not just free/busy access authorization?

  Read the article

• iptables - quick safety eval & limit max conns over time

  - by Peter Hanneman

  Working on locking down a *nix server box with some fancy iptable(v1.4.4) rules. I'm approaching the matter with a "paranoid, everyone's out to get me" style, not necessarily because I expect the box to be a hacker magnet but rather just for the sake of learning iptables and *nix security more throughly. Everything is well commented - so if anyone sees something I missed please let me know! The *nat table's "--to-ports" point to the only ports with actively listening services. (aside from pings) Layer 2 apps listen exclusively on chmod'ed sockets bridged by one of the layer 1 daemons. Layers 3+ inherit from layer 2 in a similar fashion. The two lines giving me grief are commented out at the very bottom of the *filter rules. The first line runs fine but it's all or nothing. :) Many thanks, Peter H. *nat #Flush previous rules, chains and counters for the 'nat' table -F -X -Z #Redirect traffic to alternate internal ports -I PREROUTING --src 0/0 -p tcp --dport 80 -j REDIRECT --to-ports 8080 -I PREROUTING --src 0/0 -p tcp --dport 443 -j REDIRECT --to-ports 8443 -I PREROUTING --src 0/0 -p udp --dport 53 -j REDIRECT --to-ports 8053 -I PREROUTING --src 0/0 -p tcp --dport 9022 -j REDIRECT --to-ports 8022 COMMIT *filter #Flush previous settings, chains and counters for the 'filter' table -F -X -Z #Set default behavior for all connections and protocols -P INPUT DROP -P OUTPUT DROP -A FORWARD -j DROP #Only accept loopback traffic originating from the local NIC -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j DROP #Accept all outgoing non-fragmented traffic having a valid state -A OUTPUT ! -f -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT #Drop fragmented incoming packets (Not always malicious - acceptable for use now) -A INPUT -f -j DROP #Allow ping requests rate limited to one per second (burst ensures reliable results for high latency connections) -A INPUT -p icmp --icmp-type 8 -m limit --limit 1/sec --limit-burst 2 -j ACCEPT #Declaration of custom chains -N INSPECT_TCP_FLAGS -N INSPECT_STATE -N INSPECT #Drop incoming tcp connections with invalid tcp-flags -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ALL ALL -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ALL NONE -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ACK,FIN FIN -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ACK,PSH PSH -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ACK,URG URG -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ALL FIN,PSH,URG -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags FIN,RST FIN,RST -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags SYN,RST SYN,RST -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ALL SYN,FIN,PSH,URG -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j DROP #Accept incoming traffic having either an established or related state -A INSPECT_STATE -m state --state ESTABLISHED,RELATED -j ACCEPT #Drop new incoming tcp connections if they aren't SYN packets -A INSPECT_STATE -m state --state NEW -p tcp ! --syn -j DROP #Drop incoming traffic with invalid states -A INSPECT_STATE -m state --state INVALID -j DROP #INSPECT chain definition -A INSPECT -p tcp -j INSPECT_TCP_FLAGS -A INSPECT -j INSPECT_STATE #Route incoming traffic through the INSPECT chain -A INPUT -j INSPECT #Accept redirected HTTP traffic via HA reverse proxy -A INPUT -p tcp --dport 8080 -j ACCEPT #Accept redirected HTTPS traffic via STUNNEL SSH gateway (As well as tunneled HTTPS traffic destine for other services) -A INPUT -p tcp --dport 8443 -j ACCEPT #Accept redirected DNS traffic for NSD authoritative nameserver -A INPUT -p udp --dport 8053 -j ACCEPT #Accept redirected SSH traffic for OpenSSH server #Temp solution: -A INPUT -p tcp --dport 8022 -j ACCEPT #Ideal solution: #Limit new ssh connections to max 10 per 10 minutes while allowing an "unlimited" (or better reasonably limited?) number of established connections. #-A INPUT -p tcp --dport 8022 --state NEW,ESTABLISHED -m recent --set -j ACCEPT #-A INPUT -p tcp --dport 8022 --state NEW -m recent --update --seconds 600 --hitcount 11 -j DROP COMMIT *mangle #Flush previous rules, chains and counters in the 'mangle' table -F -X -Z COMMIT

  Read the article

• Anunciando Windows Azure Mobile Services (Serviços Móveis da Windows Azure)

  - by Leniel Macaferi

  Estou animado para anunciar uma nova capacidade que estamos adicionando à Windows Azure hoje: Windows Azure Mobile Services (Serviços Móveis da Windows Azure) Os Serviços Móveis da Windows Azure tornam incrivelmente fácil conectar um backend da nuvem escalável em suas aplicações clientes e móveis. Estes serviços permitem que você facilmente armazene dados estruturados na nuvem que podem abranger dispositivos e usuários, integrando tais dados com autenticação do usuário. Você também pode enviar atualizações para os clientes através de notificações push. O lançamento de hoje permite que você adicione essas capacidades em qualquer aplicação Windows 8 em literalmente minutos, e fornece uma maneira super produtiva para que você transforme rapidamente suas ideias em aplicações. Também vamos adicionar suporte para permitir esses mesmos cenários para o Windows Phone, iOS e dispositivos Android em breve. Leia este tutorial inicial (em Inglês) que mostra como você pode construir (em menos de 5 minutos) uma simples aplicação Windows 8 "Todo List" (Lista de Tarefas) que é habilitada para a nuvem usando os Serviços Móveis da Windows Azure. Ou assista este vídeo (em Inglês) onde mostro como construí-la passo a passo. Começando Se você ainda não possui uma conta na Windows Azure, você pode se inscrever usando uma assinatura gratuita sem compromisso. Uma vez inscrito, clique na seção "preview features" logo abaixo da tab "account" (conta) no website www.windowsazure.com e ative sua conta para ter acesso ao preview dos "Mobile Services" (Serviços Móveis). Instruções sobre como ativar estes novos recursos podem ser encontradas aqui (em Inglês). Depois de habilitar os Serviços Móveis, entre no Portal da Windows Azure, clique no botão "New" (Novo) e escolha o novo ícone "Mobile Services" (Serviços Móveis) para criar o seu primeiro backend móvel. Uma vez criado, você verá uma página de início rápido como a mostrada a seguir com instruções sobre como conectar o seu serviço móvel a uma aplicação Windows 8 cliente já existente, a qual você já tenha começado a implementar, ou como criar e conectar uma nova aplicação Windows 8 cliente ao backend móvel: Leia este tutorial inicial (em Inglês) com explicações passo a passo sobre como construir (em menos de 5 minutos) uma simples aplicação Windows 8 "Todo List" (Lista de Tarefas) que armazena os dados na Windows Azure. Armazenamento Dados na Nuvem Armazenar dados na nuvem com os Serviços Móveis da Windows Azure é incrivelmente fácil. Quando você cria um Serviço Móvel da Windows Azure, nós automaticamente o associamos com um banco de dados SQL dentro da Windows Azure. O backend do Serviço Móvel da Windows Azure então fornece suporte nativo para permitir que aplicações remotas armazenem e recuperem dados com segurança através dele (usando end-points REST seguros, através de um formato OData baseado em JSON) - sem que você tenha que escrever ou implantar qualquer código personalizado no servidor. Suporte integrado para o gerenciamento do backend é fornecido dentro do Portal da Windows Azure para a criação de novas tabelas, navegação pelos dados, criação de índices, e controle de permissões de acesso. Isto torna incrivelmente fácil conectar aplicações clientes na nuvem, e permite que os desenvolvedores de aplicações desktop que não têm muito conhecimento sobre código que roda no servidor sejam produtivos desde o início. Eles podem se concentrar na construção da experiência da aplicação cliente, tirando vantagem dos Serviços Móveis da Windows Azure para fornecer os serviços de backend da nuvem que se façam necessários.  A seguir está um exemplo de código Windows 8 C#/XAML do lado do cliente que poderia ser usado para consultar os dados de um Serviço Móvel da Windows Azure. Desenvolvedores de aplicações que rodam no cliente e que usam C# podem escrever consultas como esta usando LINQ e objetos fortemente tipados POCO, os quais serão mais tarde traduzidos em consultas HTTP REST que são executadas em um Serviço Móvel da Windows Azure. Os desenvolvedores não precisam escrever ou implantar qualquer código personalizado no lado do servidor para permitir que o código do lado do cliente mostrado a seguir seja executado de forma assíncrona preenchendo a interface (UI) do cliente: Como os Serviços Móveis fazem parte da Windows Azure, os desenvolvedores podem escolher mais tarde se querem aumentar ou estender sua solução adicionando funcionalidades no lado do servidor bem como lógica de negócio mais avançada, se quiserem. Isso proporciona o máximo de flexibilidade, e permite que os desenvolvedores ampliem suas soluções para atender qualquer necessidade. Autenticação do Usuário e Notificações Push Os Serviços Móveis da Windows Azure também tornam incrivelmente fácil integrar autenticação/autorização de usuários e notificações push em suas aplicações. Você pode usar esses recursos para habilitar autenticação e controlar as permissões de acesso aos dados que você armazena na nuvem de uma maneira granular. Você também pode enviar notificações push para os usuários/dispositivos quando os dados são alterados. Os Serviços Móveis da Windows Azure suportam o conceito de "scripts do servidor" (pequenos pedaços de script que são executados no servidor em resposta a ações), os quais tornam a habilitação desses cenários muito fácil. A seguir estão links para alguns tutoriais (em Inglês) no formato passo a passo para cenários comuns de autenticação/autorização/push que você pode utilizar com os Serviços Móveis da Windows Azure e aplicações Windows 8: Habilitando Autenticação do Usuário Autorizando Usuários  Começando com Push Notifications Push Notifications para múltiplos Usuários Gerencie e Monitore seu Serviço Móvel Assim como todos os outros serviços na Windows Azure, você pode monitorar o uso e as métricas do backend de seu Serviço Móvel usando a tab "Dashboard" dentro do Portal da Windows Azure. A tab Dashboard fornece uma visão de monitoramento que mostra as chamadas de API, largura de banda e ciclos de CPU do servidor consumidos pelo seu Serviço Móvel da Windows Azure. Você também usar a tab "Logs" dentro do portal para ver mensagens de erro.  Isto torna fácil monitorar e controlar como sua aplicação está funcionando. Aumente a Capacidade de acordo com o Crescimento do Seu Negócio Os Serviços Móveis da Windows Azure agora permitem que cada cliente da Windows Azure crie e execute até 10 Serviços Móveis de forma gratuita, em um ambiente de hospedagem compartilhado com múltiplos banco de dados (onde o backend do seu Serviço Móvel será um dos vários aplicativos sendo executados em um conjunto compartilhado de recursos do servidor). Isso fornece uma maneira fácil de começar a implementar seus projetos sem nenhum custo algum (nota: cada conta gratuita da Windows Azure também inclui um banco de dados SQL de 1GB que você pode usar com qualquer número de aplicações ou Serviços Móveis da Windows Azure). Se sua aplicação cliente se tornar popular, você pode clicar na tab "Scale" (Aumentar Capacidade) do seu Serviço Móvel e mudar de "Shared" (Compartilhado) para o modo "Reserved" (Reservado). Isso permite que você possa isolar suas aplicações de maneira que você seja o único cliente dentro de uma máquina virtual. Isso permite que você dimensione elasticamente a quantidade de recursos que suas aplicações consomem - permitindo que você aumente (ou diminua) sua capacidade de acordo com o tráfego de dados: Com a Windows Azure você paga por capacidade de processamento por hora - o que te permite dimensionar para cima e para baixo seus recursos para atender apenas o que você precisa. Isso permite um modelo super flexível que é ideal para novos cenários de aplicações móveis, bem como para novas empresas que estão apenas começando. Resumo Eu só toquei na superfície do que você pode fazer com os Serviços Móveis da Windows Azure - há muito mais recursos para explorar. Com os Serviços Móveis da Windows Azure, você será capaz de construir cenários de aplicações móveis mais rápido do que nunca, permitindo experiências de usuário ainda melhores - conectando suas aplicações clientes na nuvem. Visite o centro de desenvolvimento dos Serviços Móveis da Windows Azure (em Inglês) para aprender mais, e construa sua primeira aplicação Windows 8 conectada à Windows Azure hoje. E leia este tutorial inicial (em Inglês) com explicações passo a passo que mostram como você pode construir (em menos de 5 minutos) uma simples aplicação Windows 8 "Todo List" (Lista de Tarefas) habilitada para a nuvem usando os Serviços Móveis da Windows Azure. Espero que ajude, - Scott P.S. Além do blog, eu também estou utilizando o Twitter para atualizações rápidas e para compartilhar links. Siga-me em: twitter.com/ScottGu Texto traduzido do post original por Leniel Macaferi.

  Read the article

• Eine komplette Virtualisierungslandschaft auf dem eigenen Laptop – So geht’s

  - by Manuel Hossfeld

  Eine komplette Virtualisierungslandschaftauf dem eigenen Laptop – So geht’s Wenn man sich mit dem Virtualisierungsprodukt Oracle VM in der aktuellen Version 3.x näher befassen möchte, bietet es sich natürlich an, eine eigene Umgebung zu Lern- und Testzwecken zu installieren. Doch leichter gesagt als getan: Bei näherer Betrachtung der Architektur wird man schnell feststellen, dass mehrere Rechner benötigt werden, um überhaupt alle Komponenten abbilden zu können: Zum einen gilt es, den oder die OVM Server selbst zu installieren. Das ist recht leicht und schnell erledigt, aber da Oracle VM ein „Typ 1 Hypervisor ist“ - also direkt auf dem Rechner („bare metal“) installiert wird – ist der eigenen Arbeits-PC oder Laptop dafür recht ungeeignet. (Eine Dual-Boot Umgebung wäre zwar denkbar, aber recht unpraktisch.) Zum anderen wird auch ein Rechner benötigt, auf dem der OVM Manager installiert wird. Im Gegensatz zum OVM Server erfolgt dessen Installation nicht „bare metal“, sondern auf einem bestehenden Oracle Linux. Aber was tun, wenn man gerade keinen Linux-Server griffbereit hat und auch keine extra Hardware dafür opfern will? Möchte man alle Funktionen von Oracle VM austesten, so sollte man zusätzlich über einen Shared Storag everüfugen. Dieser kann wahlweise über NFS oder über ein SAN (per iSCSI oder FibreChannel) angebunden werden. Zwar braucht man zum Testen nicht zwingend entsprechende „echte“ Storage-Hardware, aber auch die „Simulation“ entsprechender Komponenten erfordert zusätzliche Hardware mit entsprechendem freien Plattenplatz.(Alternativ können auch fertige „Software Storage Appliances“ wie z.B. OpenFiler oder FreeNAS verwendet werden). Angenommen, es stehen tatsächlich keine „echte“ Server- und Storage Hardware zur Verfügung, so benötigt man für die oben genannten drei Punkte  drei bzw. vier Rechner (PCs, Laptops...) - je nachdem ob man einen oder zwei OVM Server starten möchte. Erfreulicherweise geht es aber auch mit deutlich weniger Aufwand: Wie bereits kurz im Blogpost anlässlich des letzten OVM-Releases 3.1.1 beschrieben, ist die aktuelle Version in der Lage, selbst vollständig innerhalb von VirtualBox als Gast zu laufen. Wer bei dieser „doppelten Virtualisierung“ nun an das Prinzip der russischen Matroschka-Puppen denkt, liegt genau richtig. Oracle VM VirtualBox stellt dabei gewissermaßen die äußere Hülle dar – und da es sich bei VirtualBox im Gegensatz zu Oracle VM Server um einen „Typ 2 Hypervisor“ handelt, funktioniert dieser Ansatz auch auf einem „normalen“ Arbeits-PC bzw. Laptop, ohne dessen eigentliche Betriebsystem komplett zu überschreiben. Doch das beste dabei ist: Die Installation der jeweiligen VirtualBox VMs muss man nicht selber durchführen. Der OVM Manager als auch der OVM Server stehen bereits als vorgefertigte „VirtualBox Appliances“ im Oracle Technology Network zum Download zur Verfügung und müssen im Grunde nur noch importiert und konfiguriert werden. Das folgende Schaubild verdeutlicht das Prinzip: Die dunkelgrünen Bereiche stellen jeweils Instanzen der eben erwähnten VirtualBox Appliances für OVM Server und OVM Manager dar. (Hier im Bild sind zwei OVM Server zu sehen, als Minimum würde natürlich auch einer genügen. Dann können aber viele Features wie z.B. OVM HA nicht ausprobieren werden.) Als cleveren Trick zur Einsparung einer weiteren VM für Storage-Zwecke hat Wim Coekaerts (Senior Vice President of Linux and Virtualization Engineering bei Oracle), der „Erbauer“ der VirtualBox Appliances, die OVM Manager Appliance bereits so vorbereitet, dass diese gleichzeitig als NFS-Share (oder ggf. sogar als iSCSI Target) dienen kann. Dies beschreibt er auch kurz auf seinem Blog. Die hellgrünen Ovale stellen die VMs dar, welche dann innerhalb einer der virtualisierten OVM Server laufen können. Aufgrund der Tatsache, dass durch diese „doppelte Virtualisierung“ die Fähigkeit zur Hardware-Virtualisierung verloren geht, können diese „Nutz-VMs“ demzufolge nur paravirtualisiert sein (PVM). Die hier in blau eingezeichneten Netzwerk-Schnittstellen sind virtuelle Interfaces, welche beliebig innerhalb von VirtualBox eingerichtet werden können. Wer die verschiedenen Netzwerk-Rollen innerhalb von Oracle VM im Detail ausprobieren will, kann hier natürlich auch mehr als zwei dieser Interfaces konfigurieren. Die Vorteile dieser Lösung für Test- und Demozwecke liegen auf der Hand: Mit lediglich einem PC bzw. Laptop auf dem VirtualBox installiert ist, können alle oben genannten Komponenten installiert und genutzt werden – genügend RAM vorausgesetzt. Als Minimum darf hier 8GB gelten. Soll auf der „Host-Umgebung“ (also dem PC auf dem VirtualBox läuft) nebenbei noch gearbeiten werden und/oder mehrere „Nutz-VMs“ in dieser simulierten OVM-Server-Umgebung laufen, empfehlen sich natürlich eher 16GB oder mehr. Da die nötigen Schritte zum Installieren und initialen Konfigurieren der Umgebung ausführlich in einem entsprechenden Paper beschrieben sind, möchte ich im Rest dieses Artikels noch einige zusätzliche Tipps und Details erwähnen, welche einem das Leben etwas leichter machen können: Um möglichst entstpannt und mit zusätzlichen „Sicherheitsnetz“ an die Konfiguration der Umgebung herangehen zu können, empfiehlt es sich, ausgiebigen Gebrauch von der in VirtualBox eingebauten Funktionalität der VM Snapshots zu machen. Dies ermöglicht nicht nur ein Zurücksetzen falls einmal etwas schiefgehen sollte, sondern auch ein beliebiges Wiederholen von bereits absolvierten Teilschritten (z.B. um eine andere Idee oder Variante der Umgebung auszuprobieren). Sowohl bei den gerade erwähnten Snapshots als auch bei den VMs selbst sollte man aussagekräftige Namen verwenden. So ist sichergestellt, dass man nicht durcheinander kommt und auch nach ein paar Wochen noch weiß, welche Umgebung man da eigentlich vor sich hat. Dies beinhaltet auch die genaue Versions- und Buildnr. des jeweiligen OVM-Releases. (Siehe dazu auch folgenden Screenshot.) Weitere Informationen und Details zum aktuellen Zustand sowie Zweck der jeweiligen VMs kann in dem oft übersehenen Beschreibungsfeld hinterlegt werden. Es empfiehlt sich, bereits VOR der Installation einen Notizzettel (oder eine Textdatei) mit den geplanten IP-Adressen und Namen für die VMs zu erstellen. (Nicht vergessen: Auch der Server Pool benötigt eine eigene IP.) Dabei sollte man auch nochmal die tatsächlichen Netzwerke der zu verwendenden Virtualbox-Interfaces prüfen und notieren. Achtung: Es gibt im Rahmen der Installation einige Passworte, die vom Nutzer gesetzt werden können – und solche, die zunächst fest eingestellt sind. Zu letzterem gehört das Passwort für den ovs-agent sowie den root-User auf den OVM Servern, welche beide per Default „ovsroot“ lauten. (Alle weiteren Passwort-Informationen sind in dem „Read me first“ Dokument zu finden, welches auf dem Desktop der OVM Manager VM liegt.) Aufpassen muss man ggf. auch in der initialen „Interview-Phase“ welche die VirtualBox VMs durchlaufen, nachdem sie das erste mal gebootet werden. Zu diesem Zeitpunkt ist nämlich auf jeden Fall noch die amerikanische Tastaturbelegung aktiv, so dass man z.B. besser kein „y“ und „z“ in seinem selbst gewählten Passwort verwendet. Aufgrund der Tatsache, dass wie oben erwähnt der OVM Manager auch gleichzeitig den Shared Storage bereitstellt, sollte darauf geachtet werden, dass dessen VM vor den OVM Server VMs gestartet wird. (Andernfalls „findet“ der dem OVM Server Pool zugrundeliegende Cluster sein sog. „Server Pool File System“ nicht.)

  Read the article

• Introducción a ENUM (E.164 Number Mapping)

  - by raul.goycoolea

  E.164 Number Mapping (ENUM o Enum) se diseñó para resolver la cuestión de como se pueden encontrar servicios de internet mediante un número telefónico, es decir cómo se pueden usar los los teléfonos, que solamente tienen 12 teclas, para acceder a servicios de Internet. La parte más básica de ENUM es por tanto la convergencia de las redes del STDP y la IP; ENUM hace que pueda haber una correspondencia entre un número telefónico y un identificador de Internet. En síntesis, Enum es un conjunto de protocolos para convertir números E.164 en URIs, y viceversa, de modo que el sistema de numeración E.164 tenga una función de correspondencia con las direcciones URI en Internet. Esta función es necesaria porque un número telefónico no tiene sentido en el mundo IP, ni una dirección IP tiene sentido en las redes telefónicas. Así, mediante esta técnica, las comunicaciones cuyo destino se marque con un número E.164, puedan terminar en el identificador correcto (número E.164 si termina en el STDP, o URI si termina en redes IP). La solución técnica de mirar en una base de datos cual es el identificador de destino tiene consecuencias muy interesantes, como que la llamada se pueda terminar donde desee el abonado llamado. Esta es una de las características que ofrece ENUM : el destino concreto, el terminal o terminales de terminación, no lo decide quien inicia la llamada o envía el mensaje sino la persona que es llamada o recibe el mensaje, que ha escrito sus preferencias en una base de datos. En otras palabras, el destinatario de la llamada decide cómo quiere ser contactado, tanto si lo que se le comunica es un email, o un sms, o telefax, o una llamada de voz. Cuando alguien quiera llamarle a usted, lo que tiene que hacer el llamante es seleccionar su nombre (el del llamado) en la libreta de direcciones del terminal o marcar su número ENUM. Una aplicación informática obtendrá de una base de datos los datos de contacto y disponibilidad que usted decidió. Y el mensaje le será remitido tal como usted especificó en dicha base de datos. Esto es algo nuevo que permite que usted, como persona llamada, defina sus preferencias de terminación para cualquier tipo de contenido. Por ejemplo, usted puede querer que todos los emails le sean enviados como sms o que los mensajes de voz se le remitan como emails; las comunicaciones ya no dependen de donde esté usted o deque tipo de terminal utiliza (teléfono, pda, internet). Además, con ENUM usted puede gestionar la portabilidad de sus números fijos y móviles. ENUM emplea una técnica de búsqueda indirecta en una base de datos que tiene los registros NAPTR ("Naming Authority Pointer Resource Records" tal como lo define el RFC 2915), y que utiliza el número telefónico Enum como clave de búsqueda, para obtener qué URIs corresponden a cada número telefónico. La base de datos que almacena estos registros es del tipo DNS.Si bien en uno de sus diversos usos sirve para facilitar las llamadas de usuarios de VoIP entre redes tradicionales del STDP y redes IP, debe tenerse en cuenta que ENUM no es una función de VoIP sino que es un mecanismo de conversión entre números/identificadores. Por tanto no debe ser confundido con el uso normal de enrutar las llamadas de VoIP mediante los protocolos SIP y H.323. ENUM puede ser muy útil para aquellas organizaciones que quieran tener normalizada la manera en que las aplicaciones acceden a los datos de comunicación de cada usuario. FundamentosPara que la convergencia entre el Sistema Telefónico Disponible al Público (STDP) y la Telefonía por Internet o Voz sobre IP (VoIP) y que el desarrollo de nuevos servicios multimedia tengan menos obstáculos, es fundamental que los usuarios puedan realizar sus llamadas tal como están acostumbrados a hacerlo, marcando números. Para eso, es preciso que haya un sistema universal de correspondencia de número a direcciones IP (y viceversa) y que las diferentes redes se puedan interconectar. Hay varias fórmulas que permiten que un número telefónico sirva para establecer comunicación con múltiples servicios. Una de estas fórmulas es el Electronic Number Mapping System ENUM, normalizado por el grupo de tareas especiales de ingeniería en Internet (IETF, Internet engineering task force), del que trata este artículo, que emplea la numeración E.164, los protocolos y la infraestructura telefónica para acceder indirectamente a diferentes servicios. Por tanto, se accede a un servicio mediante un identificador numérico universal: un número telefónico tradicional. ENUM permite comunicar las direcciones del mundo IP con las del mundo telefónico, y viceversa, sin problemas. Antes de entrar en mayores profundidades, conviene dar una breve pincelada para aclarar cómo se organiza la correspondencia entre números o URI. Para ello imaginemos una llamada que se inicia desde el servicio telefónico tradicional con destino a un número Enum. En ENUM Público, el abonado o usuario Enum a quien va destinada lallamada, habrá decidido incluir en la base de datos Enum uno o varios URI o números E.164, que forman una lista con sus preferencias para terminar la llamada. Y el sistema como se explica más adelante, elegirá cual es el número o URI adecuado para dicha terminación. Por tanto como resultado de la consulta a la base dedatos Enum siempre se da una relación unívoca entre el número Enum marcado y el de terminación, conforme a los deseos de la persona llamada.Variedades de ENUMUna posible fuente de confusión cuando se trata sobre ENUM es la variedad de soluciones o sistemas que emplean este calificativo. Lo habitual es que cuando se haga una referencia a ENUM se trate de uno de los siguientes casos: ENUM Público: Es la visión original de ENUM, como base de datos pública, parecida a un directorio, donde el abonado "opta" a ser incluido en la base de datos, que está gestionada en el dominio e164.arpa, delegando a cada país la gestión de la base de datos y la numeración. También se conoce como ENUM de usuario. Carrier ENUM, o ENUM Infraestructura, o de Operador: Cuando grupos de operadores proveedores de servicios de comunicaciones electrónicas acuerdan compartir la información de los abonados por medio de ENUM mediante acuerdos privados. En este caso son los operadores quienes controlan la información del abonado en vez de hacerlo (optar) los propios abonados. Carrier ENUM o ENUM de Operador también se conoce como Infrastructure ENUM o ENUM Infraestructura, y está siendo normalizado por IETF para la interconexión de VoIP (mediante acuerdos de peering). Como se explicará en la correspondiente sección, también se puede utilizar para la portabilidad o conservación de número. ENUM Privado: Un operador de telefonía o de VoIP, o un ISP, o un gran usuario, puede utilizar las técnicas de ENUM en sus redes y en las de sus clientes sin emplear DNS públicos, con DNS privados o internos. Resulta fácil imaginar como puede utilizarse esta técnica para que compañías multinacionales, o bancos, o agencias de viajes, tengan planes de numeración muy coherentes y eficaces. Cómo funciona ENUMPara conocer cómo funciona Enum, le remitimos a la página correspondiente a ENUM Público, puesto que esa variedad de Enum es la típica, la que dió lugar a todos los procedimientos y normas de IETF .Más detalles sobre: @page { margin: 0.79in } P { margin-bottom: 0.08in } H4 { margin-bottom: 0.08in } H4.ctl { font-family: "Lohit Hindi" } A:link { so-language: zxx } -- ENUM Público. En esta página se explica con cierto detalle como funciona Enum Carrier ENUM o ENUM de Operador ENUM Privado Normas técnicas: RFC 2915: NAPTR RR. The Naming Authority Pointer (NAPTR) DNS Resource Record RFC 3761: ENUM Protocol. The E.164 to Uniform Resource Identifiers (URI) Dynamic Delegation Discovery System (DDDS) Application (ENUM). (obsoletes RFC 2916). RFC 3762: Usage of H323 addresses in ENUM Protocol RFC 3764: Usage of SIP addresses in ENUM Protocol RFC 3824: Using E.164 numbers with SIP RFC 4769: IANA Registration for an Enumservice Containing Public Switched Telephone Network (PSTN) Signaling Information RFC 3026: Berlin Liaison Statement RFC 3953: Telephone Number Mapping (ENUM) Service Registration for Presence Services RFC 2870: Root Name Server Operational Requirements RFC 3482: Number Portability in the Global Switched Telephone Network (GSTN): An Overview RFC 2168: Resolution of Uniform Resource Identifiers using the Domain Name System Organizaciones relacionadas con ENUM RIPE - Adimistrador del nivel 0 de ENUM e164.arpa. ITU-T TSB - Unión Internacional de Telecomunicaciones ETSI - European Telecommunications Standards Institute VisionNG - Administrador del rango ENUM 878-10 IETF ENUM Chapter

  Read the article

• Base de Datos Oracle, su mejor opción para reducir costos de IT

  - by Ivan Hassig

  Por Victoria Cadavid Sr. Sales Cosultant Oracle Direct Uno de los principales desafíos en la administración de centros de datos es la reducción de costos de operación. A medida que las compañías crecen y los proveedores de tecnología ofrecen soluciones cada vez más robustas, conservar el equilibrio entre desempeño, soporte al negocio y gestión del Costo Total de Propiedad es un desafío cada vez mayor para los Gerentes de Tecnología y para los Administradores de Centros de Datos. Las estrategias más comunes para conseguir reducción en los costos de administración de Centros de Datos y en la gestión de Tecnología de una organización en general, se enfocan en la mejora del desempeño de las aplicaciones, reducción del costo de administración y adquisición de hardware, reducción de los costos de almacenamiento, aumento de la productividad en la administración de las Bases de Datos y mejora en la atención de requerimientos y prestación de servicios de mesa de ayuda, sin embargo, las estrategias de reducción de costos deben contemplar también la reducción de costos asociados a pérdida y robo de información, cumplimiento regulatorio, generación de valor y continuidad del negocio, que comúnmente se conciben como iniciativas aisladas que no siempre se adelantan con el ánimo de apoyar la reducción de costos. Una iniciativa integral de reducción de costos de TI, debe contemplar cada uno de los factores que  generan costo y pueden ser optimizados. En este artículo queremos abordar la reducción de costos de tecnología a partir de la adopción del que según los expertos es el motor de Base de Datos # del mercado.Durante años, la base de datos Oracle ha sido reconocida por su velocidad, confiabilidad, seguridad y capacidad para soportar cargas de datos tanto de aplicaciones altamente transaccionales, como de Bodegas de datos e incluso análisis de Big Data , ofreciendo alto desempeño y facilidades de administración, sin embrago, cuando pensamos en proyectos de reducción de costos de IT, además de la capacidad para soportar aplicaciones (incluso aplicaciones altamente transaccionales) con alto desempeño, pensamos en procesos de automatización, optimización de recursos, consolidación, virtualización e incluso alternativas más cómodas de licenciamiento. La Base de Datos Oracle está diseñada para proveer todas las capacidades que un área de tecnología necesita para reducir costos, adaptándose a los diferentes escenarios de negocio y a las capacidades y características de cada organización.Es así, como además del motor de Base de Datos, Oracle ofrece una serie de soluciones para optimizar la administración de la información a través de mecanismos de optimización del uso del storage, continuidad del Negocio, consolidación de infraestructura, seguridad y administración automática, que propenden por un mejor uso de los recursos de tecnología, ofrecen opciones avanzadas de configuración y direccionan la reducción de los tiempos de las tareas operativas más comunes. Una de las opciones de la base de datos que se pueden provechar para reducir costos de hardware es Oracle Real Application Clusters. Esta solución de clustering permite que varios servidores (incluso servidores de bajo costo) trabajen en conjunto para soportar Grids o Nubes Privadas de Bases de Datos, proporcionando los beneficios de la consolidación de infraestructura, los esquemas de alta disponibilidad, rápido desempeño y escalabilidad por demanda, haciendo que el aprovisionamiento, el mantenimiento de las bases de datos y la adición de nuevos nodos se lleve e cabo de una forma más rápida y con menos riesgo, además de apalancar las inversiones en servidores de menor costo. Otra de las soluciones que promueven la reducción de costos de Tecnología es Oracle In-Memory Database Cache que permite almacenar y procesar datos en la memoria de las aplicaciones, permitiendo el máximo aprovechamiento de los recursos de procesamiento de la capa media, lo que cobra mucho valor en escenarios de alta transaccionalidad. De este modo se saca el mayor provecho de los recursos de procesamiento evitando crecimiento innecesario en recursos de hardware. Otra de las formas de evitar inversiones innecesarias en hardware, aprovechando los recursos existentes, incluso en escenarios de alto crecimiento de los volúmenes de información es la compresión de los datos. Oracle Advanced Compression permite comprimir hasta 4 veces los diferentes tipos de datos, mejorando la capacidad de almacenamiento, sin comprometer el desempeño de las aplicaciones. Desde el lado del almacenamiento también se pueden conseguir reducciones importantes de los costos de IT. En este escenario, la tecnología propia de la base de Datos Oracle ofrece capacidades de Administración Automática del Almacenamiento que no solo permiten una distribución óptima de los datos en los discos físicos para garantizar el máximo desempeño, sino que facilitan el aprovisionamiento y la remoción de discos defectuosos y ofrecen balanceo y mirroring, garantizando el uso máximo de cada uno de los dispositivos y la disponibilidad de los datos. Otra de las soluciones que facilitan la administración del almacenamiento es Oracle Partitioning, una opción de la Base de Datos que permite dividir grandes tablas en estructuras más pequeñas. Esta aproximación facilita la administración del ciclo de vida de la información y permite por ejemplo, separar los datos históricos (que generalmente se convierten en información de solo lectura y no tienen un alto volumen de consulta) y enviarlos a un almacenamiento de bajo costos, conservando la data activa en dispositivos de almacenamiento más ágiles. Adicionalmente, Oracle Partitioning facilita la administración de las bases de datos que tienen un gran volumen de registros y mejora el desempeño de la base de datos gracias a la posibilidad de optimizar las consultas haciendo uso únicamente de las particiones relevantes de una tabla o índice en el proceso de búsqueda. Otros factores adicionales, que pueden generar costos innecesarios a los departamentos de Tecnología son: La pérdida, corrupción o robo de datos y la falta de disponibilidad de las aplicaciones para dar soporte al negocio. Para evitar este tipo de situaciones que pueden acarrear multas y pérdida de negocios y de dinero, Oracle ofrece soluciones que permiten proteger y auditar la base de datos, recuperar la información en caso de corrupción o ejecución de acciones que comprometan la integridad de la información y soluciones que permitan garantizar que la información de las aplicaciones tenga una disponibilidad de 7x24. Ya hablamos de los beneficios de Oracle RAC, para facilitar los procesos de Consolidación y mejorar el desempeño de las aplicaciones, sin embrago esta solución, es sumamente útil en escenarios dónde las organizaciones de quieren garantizar una alta disponibilidad de la información, ante fallo de los servidores o en eventos de desconexión planeada para realizar labores de mantenimiento. Además de Oracle RAC, existen soluciones como Oracle Data Guard y Active Data Guard que permiten replicar de forma automática las bases de datos hacia un centro de datos de contingencia, permitiendo una recuperación inmediata ante eventos que deshabiliten por completo un centro de datos. Además de lo anterior, Active Data Guard, permite aprovechar la base de datos de contingencia para realizar labores de consulta, mejorando el desempeño de las aplicaciones. Desde el punto de vista de mejora en la seguridad, Oracle cuenta con soluciones como Advanced security que permite encriptar los datos y los canales a través de los cueles se comparte la información, Total Recall, que permite visualizar los cambios realizados a la base de datos en un momento determinado del tiempo, para evitar pérdida y corrupción de datos, Database Vault que permite restringir el acceso de los usuarios privilegiados a información confidencial, Audit Vault, que permite verificar quién hizo qué y cuándo dentro de las bases de datos de una organización y Oracle Data Masking que permite enmascarar los datos para garantizar la protección de la información sensible y el cumplimiento de las políticas y normas relacionadas con protección de información confidencial, por ejemplo, mientras las aplicaciones pasan del ambiente de desarrollo al ambiente de producción. Como mencionamos en un comienzo, las iniciativas de reducción de costos de tecnología deben apalancarse en estrategias que contemplen los diferentes factores que puedan generar sobre costos, los factores de riesgo que puedan acarrear costos no previsto, el aprovechamiento de los recursos actuales, para evitar inversiones innecesarias y los factores de optimización que permitan el máximo aprovechamiento de las inversiones actuales. Como vimos, todas estas iniciativas pueden ser abordadas haciendo uso de la tecnología de Oracle a nivel de Base de Datos, lo más importante es detectar los puntos críticos a nivel de riesgo, diagnosticar las proporción en que están siendo aprovechados los recursos actuales y definir las prioridades de la organización y del área de IT, para así dar inicio a todas aquellas iniciativas que de forma gradual, van a evitar sobrecostos e inversiones innecesarias, proporcionando un mayor apoyo al negocio y un impacto significativo en la productividad de la organización. Más información http://www.oracle.com/lad/products/database/index.html?ssSourceSiteId=otnes 1Fuente: Market Share: All Software Markets, Worldwide 2011 by Colleen Graham, Joanne Correia, David Coyle, Fabrizio Biscotti, Matthew Cheung, Ruggero Contu, Yanna Dharmasthira, Tom Eid, Chad Eschinger, Bianca Granetto, Hai Hong Swinehart, Sharon Mertz, Chris Pang, Asheesh Raina, Dan Sommer, Bhavish Sood, Marianne D'Aquila, Laurie Wurster and Jie Zhang. - March 29, 2012 2Big Data: Información recopilada desde fuentes no tradicionales como blogs, redes sociales, email, sensores, fotografías, grabaciones en video, etc. que normalmente se encuentran de forma no estructurada y en un gran volumen

  Read the article

• Generate Strongly Typed Observable Events for the Reactive Extensions for .NET (Rx)

  - by Bobby Diaz

  I must have tried reading through the various explanations and introductions to the new Reactive Extensions for .NET before the concepts finally started sinking in.  The article that gave me the ah-ha moment was over on SilverlightShow.net and titled Using Reactive Extensions in Silverlight.  The author did a good job comparing the "normal" way of handling events vs. the new "reactive" methods. Admittedly, I still have more to learn about the Rx Framework, but I wanted to put together a sample project so I could start playing with the new Observable and IObservable<T> constructs.  I decided to throw together a whiteboard application in Silverlight based on the Drawing with Rx example on the aforementioned article.  At the very least, I figured I would learn a thing or two about a new technology, but my real goal is to create a fun application that I can share with the kids since they love drawing and coloring so much! Here is the code sample that I borrowed from the article: var mouseMoveEvent = Observable.FromEvent<MouseEventArgs>(this, "MouseMove"); var mouseLeftButtonDown = Observable.FromEvent<MouseButtonEventArgs>(this, "MouseLeftButtonDown"); var mouseLeftButtonUp = Observable.FromEvent<MouseButtonEventArgs>(this, "MouseLeftButtonUp");       var draggingEvents = from pos in mouseMoveEvent                              .SkipUntil(mouseLeftButtonDown)                              .TakeUntil(mouseLeftButtonUp)                              .Let(mm => mm.Zip(mm.Skip(1), (prev, cur) =>                                  new                                  {                                      X2 = cur.EventArgs.GetPosition(this).X,                                      X1 = prev.EventArgs.GetPosition(this).X,                                      Y2 = cur.EventArgs.GetPosition(this).Y,                                      Y1 = prev.EventArgs.GetPosition(this).Y                                  })).Repeat()                          select pos;       draggingEvents.Subscribe(p =>     {         Line line = new Line();         line.Stroke = new SolidColorBrush(Colors.Black);         line.StrokeEndLineCap = PenLineCap.Round;         line.StrokeLineJoin = PenLineJoin.Round;         line.StrokeThickness = 5;         line.X1 = p.X1;         line.Y1 = p.Y1;         line.X2 = p.X2;         line.Y2 = p.Y2;         this.LayoutRoot.Children.Add(line);     }); One thing that was nagging at the back of my mind was having to deal with the event names as strings, as well as the verbose syntax for the Observable.FromEvent<TEventArgs>() method.  I came up with a couple of static/helper classes to resolve both issues and also created a T4 template to auto-generate these helpers for any .NET type.  Take the following code from the above example: var mouseMoveEvent = Observable.FromEvent<MouseEventArgs>(this, "MouseMove"); var mouseLeftButtonDown = Observable.FromEvent<MouseButtonEventArgs>(this, "MouseLeftButtonDown"); var mouseLeftButtonUp = Observable.FromEvent<MouseButtonEventArgs>(this, "MouseLeftButtonUp"); Turns into this with the new static Events class: var mouseMoveEvent = Events.Mouse.Move.On(this); var mouseLeftButtonDown = Events.Mouse.LeftButtonDown.On(this); var mouseLeftButtonUp = Events.Mouse.LeftButtonUp.On(this); Or better yet, just remove the variable declarations altogether:     var draggingEvents = from pos in Events.Mouse.Move.On(this)                              .SkipUntil(Events.Mouse.LeftButtonDown.On(this))                              .TakeUntil(Events.Mouse.LeftButtonUp.On(this))                              .Let(mm => mm.Zip(mm.Skip(1), (prev, cur) =>                                  new                                  {                                      X2 = cur.EventArgs.GetPosition(this).X,                                      X1 = prev.EventArgs.GetPosition(this).X,                                      Y2 = cur.EventArgs.GetPosition(this).Y,                                      Y1 = prev.EventArgs.GetPosition(this).Y                                  })).Repeat()                          select pos; The Move, LeftButtonDown and LeftButtonUp members of the Events.Mouse class are readonly instances of the ObservableEvent<TTarget, TEventArgs> class that provide type-safe access to the events via the On() method.  Here is the code for the class: using System; using System.Collections.Generic; using System.Linq;   namespace System.Linq {     /// <summary>     /// Represents an event that can be managed via the <see cref="Observable"/> API.     /// </summary>     /// <typeparam name="TTarget">The type of the target.</typeparam>     /// <typeparam name="TEventArgs">The type of the event args.</typeparam>     public class ObservableEvent<TTarget, TEventArgs> where TEventArgs : EventArgs     {         /// <summary>         /// Initializes a new instance of the <see cref="ObservableEvent"/> class.         /// </summary>         /// <param name="eventName">Name of the event.</param>         protected ObservableEvent(String eventName)         {             EventName = eventName;         }           /// <summary>         /// Registers the specified event name.         /// </summary>         /// <param name="eventName">Name of the event.</param>         /// <returns></returns>         public static ObservableEvent<TTarget, TEventArgs> Register(String eventName)         {             return new ObservableEvent<TTarget, TEventArgs>(eventName);         }           /// <summary>         /// Creates an enumerable sequence of event values for the specified target.         /// </summary>         /// <param name="target">The target.</param>         /// <returns></returns>         public IObservable<IEvent<TEventArgs>> On(TTarget target)         {             return Observable.FromEvent<TEventArgs>(target, EventName);         }           /// <summary>         /// Gets or sets the name of the event.         /// </summary>         /// <value>The name of the event.</value>         public string EventName { get; private set; }     } } And this is how it's used:     /// <summary>     /// Categorizes <see cref="ObservableEvents"/> by class and/or functionality.     /// </summary>     public static partial class Events     {         /// <summary>         /// Implements a set of predefined <see cref="ObservableEvent"/>s         /// for the <see cref="System.Windows.System.Windows.UIElement"/> class         /// that represent mouse related events.         /// </summary>         public static partial class Mouse         {             /// <summary>Represents the MouseMove event.</summary>             public static readonly ObservableEvent<UIElement, MouseEventArgs> Move =                 ObservableEvent<UIElement, MouseEventArgs>.Register("MouseMove");               // additional members omitted...         }     } The source code contains a static Events class with prefedined members for various categories (Key, Mouse, etc.).  There is also an Events.tt template that you can customize to generate additional event categories for any .NET type.  All you should have to do is add the name of your class to the types collection near the top of the template:     types = new Dictionary<String, Type>()     {         //{ "Microsoft.Maps.MapControl.Map, Microsoft.Maps.MapControl", null }         { "System.Windows.FrameworkElement, System.Windows", null },         { "Whiteboard.MainPage, Whiteboard", null }     }; The template is also a bit rough at this point, but at least it generates code that *should* compile.  Please let me know if you run into any issues with it.  Some people have reported errors when trying to use T4 templates within a Silverlight project, but I was able to get it to work with a little black magic...  You can download the source code for this project or play around with the live demo.  Just be warned that it is at a very early stage so don't expect to find much today.  I plan on adding alot more options like pen colors and sizes, saving, printing, etc. as time permits.  HINT: hold down the ESC key to erase! Enjoy! Additional Resources Using Reactive Extensions in Silverlight DevLabs: Reactive Extensions for .NET (Rx) Rx Framework Part III - LINQ to Events - Generating GetEventName() Wrapper Methods using T4

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22  | Next Page >