Search Results

Search found 2489 results on 100 pages for 'hp laserjet'.

Page 19/100 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

  - by Schof

  This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

  Read the article

• Maximum 5 minute battery life with Ubuntu 11.10 on HP laptop

  - by JamesG

  I apologise if this question is too similar to the numerous others already asked, but it seems that my difference in battery life is significantly more noticeable than others that have been reported. I recently installed Ubuntu 11.10 on my HP Pavilion dv6 laptop (which I purchased brand new just under one year ago). When running Windows 7 on this laptop, I have been able to get up to two and a half to three hours of battery life with wireless disabled and when running only Microsoft Word. However, when running Ubuntu, I am unable to use the laptop if it is not plugged in. Upon unplugging the fully-charged machine from the power cord, if I have wireless enabled, I immediately receive a notification that the battery levels are critically low and that shutdown is imminent. Even if I replace the power plug, the laptop shuts down within thirty seconds. If I disable wireless capability, I am able to run the laptop for an absolute maximum of five minutes on battery powers before receiving the same message. I have tried running with Jupiter on Power Saver mode, but to no noticeable effect. Ignoring the fact that I can't use my laptop without being attached to a power source, I really do enjoy using Ubuntu, and hence would greatly appreciate any help that can be offered.

  Read the article

• how to get wireless to work on my HP Compaq nx6325 Notebook on 12.04

  - by user211487

  When my laptop ran XP, the wireless worked perfectly. Now the only way I get internet is having it wired in my living room - which is MASSIVELY inconvenient for me seeing as my room is outside. I have downloaded the driver from 'Additional Drivers', reset my computer (with difficulty, it also doesn't seem to like turning off, so I have to 'kill' it) and still nothing! I have looked all over the internet trying to find solutions but I just cant seem to get it to work. I have a USB wireless stick but I can't load the driver from the CD. I got this comment on a previous question: "Using either Snaptic Package Manager or Ubuntu's own Software Centre, remove "bcmwl-kernel-source" if it's already installed. Next, search for "firmware-b43-installer” and “b43-fwcutter” and install both. Finally, running Software Sources and checking the Additional Drivers tab you should find Broadcom STA Wireless Driver that you can select, install and on reboot hopefully have wireless working ok..." Which I replied: "Right, so I tried to find/remove "bcmwl-kernel-source" but couldn't find anything. I managed to install both "firmware-b43-installer” and “b43-fwcutter” using terminal, after finding out how it worked. And lastly, I couldn't figure out how to find 'Broadcom STA Wireless Driver' - still no more additional drivers. And my wireless is still not working. My laptop has a button that turns wifi on and off and since I put Ubuntu on it, it hasn't worked. And also, my computer still doesn't seem to restart properly - it just gets stuck on the ubuntu loading screen." - hope that helps, somewhat I am VERY new to Linux, not very technical and in need of help! -Running Ubuntu 12.04 32bit on a HP Compaq nx6325 Notebook Thank you to anyone who replies, its much appreciated

  Read the article

• Display Driver Issue on an hp TX2-1160ea Notebook

  - by Sam

  I'm new to Linux and recently switched to Ubuntu 11.04 due to my project requirement. My laptop has been freezing and going to black screen of death when I run anything related to display (Share desktop, stream video, etc). Today I went through the Ubuntu forum to install the appropriate graphic driver and, after doing it, I rebooted my PC. It gave an error before login saying "select the recovery mode" and after clicking OK, it didn't give the same error on reboot but I've lost the 11.04 graphical interface and all I see is the interface of Ubuntu v10 with slow visuals (even scrolling up/down on browser is really slow). For the reference, here's a desktop screenshot so that you can understand the situation. Also the laptop is overheating. How can I fix this problem? How can i get the Ubuntu 11.04 view back? I also tried Google, but couldn't find any issue like this. Some general Information: Laptop: HP TouchSmart TX2-1160ea Processor: AMD Turion TX2 Memory: 4GB OS: Ubuntu 11.04 Some debugging information:: $ report-hw | grep controller lspci -knn: 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] lspci -knn: 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) lspci -knn: 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) And: $ dpkg -l '*fglrx*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii fglrx 2:8.840-0ubunt Video driver for the ATI graphics accelerato ii fglrx-amdcccle 2:8.840-0ubunt Catalyst Control Center for the ATI graphics un fglrx-control <none> (no description available) un fglrx-control- <none> (no description available) ii fglrx-dev 2:8.840-0ubunt Video driver for the ATI graphics accelerato un fglrx-driver <none> (no description available) un fglrx-driver-d <none> (no description available) un fglrx-kernel-s <none> (no description available) un fglrx-modalias <none> (no description available) un xfree86-driver <none> (no description available) un xfree86-driver <none> (no description available) un xorg-driver-fg <none> (no description available) un xorg-driver-fg <none> (no description available) If you need any more information that could help, just ask.

  Read the article

• Is it possible to shrink the size of an HP Smart Array logical drive?

  - by ewwhite

  I know extension is quite possible using the hpacucli utility, but is there an easy way to reduce the size of an existing logical drive (not array)? The controller is a P410i in a ProLiant DL360 G6 server. I'd like to reduce logicaldrive 1 from 72GB to 40GB. => ctrl all show config detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 5001438006FD9A50 Cache Serial Number: PAAVP9VYFB8Y RAID 6 (ADG) Status: Disabled Controller Status: OK Chassis Slot: Hardware Revision: Rev C Firmware Version: 3.66 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 3 secs Surface Scan Mode: Idle Queue Depth: Automatic Monitor and Performance Delay: 60 min Elevator Sort: Enabled Degraded Performance Optimization: Disabled Inconsistency Repair Policy: Disabled Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 15 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Enabled Total Cache Size: 512 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 412476 MB Status: OK Logical Drive: 1 Size: 72.0 GB Fault Tolerance: RAID 1+0 Heads: 255 Sectors Per Track: 32 Cylinders: 18504 Strip Size: 256 KB Status: OK Array Accelerator: Enabled Unique Identifier: 600508B1001C132E4BBDFAA6DAD13DA3 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 196 MB, / 12.0 GB, /usr 8.0 GB, /var 4.0 GB, /tmp 2.0 GB OS Status: LOCKED Logical Drive Label: AE438D6A5001438006FD9A50BE0A Mirror Group 0: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK) SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 Device Number: 250 Firmware Version: RevC WWID: 5001438006FD9A5F Vendor ID: PMCSIERA Model: SRC 8x6G

  Read the article

• Does anyone know a way to interact with HP OV(NNM) with python, perl or bash?

  - by marc.riera

  Do anyone know if there is out there any API/library to access NNM database from perl or python? We have a NNM 7.53 which give us access to its data with its java based applet through http. And of course through the 'ovw' GUI interface. I've tried to use Mechanize and selenium2(webdriver) to automatize some checks. The pourpose is to integrate it with our other monitoring services on our "general master console". Many thanks. Marc

  Read the article

• Because my HP Pavilion dv2700, AMD Turion 64x2 TK-60 2000Mhz 2 nucleus is too much heating up?

  - by Sergio

  The system is Windows 7. The temperatures were in 68 degrees Celsius in CPU / Nucleus 1 and in 63 degrees Celsius in the Processor, with little use of CPU. With the execution of 15 minutes of continuous video in Windows Media Player, they reached 85 degrees Celsius in CPU / Nucleus 1 and 86 degrees Celsius in the Processor.

  Read the article

• HP p410i array controller - what happens if i add memory?

  - by James

  I have a p410i array controller that only has 256ram. We want to create a raid 5 so we have procured a 512 write back cache module. If we install the write back cache, will this erase the existing raid information. The server currently has 2 disks in raid 1. 6 are spare waiting for an upgrade to create a raid 5. the concern is if we replace/upgrade the memory for the controller, we will wipe the existing production raid 1 array. Thanks in advance.

  Read the article

• Ubuntu 12.04 Hp G72 Problem Installing proprietary wireless driver

  - by user69402

  I have a fresh Ubuntu 12.04 installed on HP G72 machine. In order for my wireless to work I need the proprietary driver installed - Broadcom STA wireless driver. Trying to install it from the System Settings gives me the error: "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log". So far I suspect the error to be caused by the bad "bcmwl-kernel-source" installation. What i tried: 1. remove "bcmwl-kernel-source" 2. install "bcmwl-kernel-source" installation through the terminal ends with "error code (1)". I would greatly appreciate any help Here is everything that the terminal returns: Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: bcmwl-kernel-source 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/1,151 kB of archives. After this operation, 3,514 kB of additional disk space will be used. Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 170331 files and directories currently installed.) Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.100.82.38+bdcom-0ubuntu6.1_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.38+bdcom-0ubuntu6.1) ... Loading new bcmwl-5.100.82.38+bdcom DKMS files... /usr/sbin/dkms: line 467: unset: POST_REMOVE$PRE_BUMLD': not a valid identifier /usr/sbin/dkms: line 467: unset:BUILD_E\CLUWIVE_ARCH': not a valid identifier /usr/sbin/dkms: line 467: unset: $': not a valid identifier /usr/sbin/dkms: line 467: unset:$': not a valid identifier /usr/sbin/dkms: line 467: unset: modules_conf_arra}': not a valid identifier /usr/sbin/dkms: line 467: unset:$': not a valid identifier /usr/sbin/dkms: line 467: unset: $': not a valid identifier /usr/sbin/dkms: line 467: unset:$': not a valid identifier /usr/sbin/dkms: line 467: unset: $': not a valid identifier /usr/sbin/dkms: line 467: unset:$': not a valid identifier /usr/sbin/dkms: line 467: unset: `$': not a valid identifier /usr/sbin/dkms: line 419: ${!POST_REMOVE$PRE_BUMLD[@]}: bad substitution /usr/sbin/dkms: line 419: ${!BUILD_E\CLUWIVE_ARCH[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution malloc: ../bash/subst.c:3671: assertion botched free: start and end chunk sizes differ Aborting.../tmp/tmp.pEXTnftUfI: line 4: modules_conf_arra}[[@]}]=[[@]}]}: command not found dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified for record #0. dkms.conf: Error! Directive 'DEST_MODULE_LOCATION' does not begin with '/kernel', '/updates', or '/extra' in record #0. dkms.conf: Error! No 'PACKAGE_VERSION' directive specified. Error! Bad conf file. File: /usr/src/bcmwl-5.100.82.38+bdcom/dkms.conf does not represent a valid dkms.conf file. dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 8 Errors were encountered while processing: bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• HP Power Manager SMTP setup doesn't have space for username & password

  - by Martha

  Is there some way to configure HP Power Manager to not assume that there's an email server running locally? We recently acquired an HP T1500 G3 UPS, which we're trying to control using HP Power Manager 4.2. The main reason we wanted to get this particular UPS is because it says it's capable of sending notifications (of the "Yo, the power's out, you may want to look into it" type) via email, as opposed to SNMP. Turns out, that's not entirely true. The server is running Windows Server 2003. It is not running an email server of any sort - we do that via two different providers. Outlook email is provided by Verizon, and our SMTP email service is provided by a small local company. When we use CDO to send auto-generated notification emails, we have to provide the SMTP server name, port, username, and password. The HP Power Manager interface only allows us to enter the server name and the username. Thus, not surprisingly, the emails never go anywhere. Help?

  Read the article

• Migrating RAID6 array from HP SmartArray P600 to LSI MegaRAID SAS 8888ELP

  - by MLu

  My customer has an external RAID6 array (8x 1TB in HP MSA60 enclosure) attached to HP SmartArray P600 controller. They have now decided to replace the server and the new one comes with LSI MegaRAID SAS 8888ELP. The HW supplier insists the migration is as simple as pulling the eSATA cable from P600 and inserting it into LSI but I'm not convinced. Unfortunately I have nowhere to test, and will have to do the exercise on the production array :( So the question in brief - is it possible to import the HP SmartArray P600-created RAID6 array to LSI MegaRAID 8888ELP?

  Read the article

• spurious hardware memory 'errors' on hp dl380 g5's being generated

  - by friedchicken

  Hi All, i've got 2 new HP dl380g5 servers running HP's esxi4 patched to 219382. they have both been patched up to the latest hp firmware levels (firmware cd 8.7) both are running 32gb (4 x 8gb sticks) both servers are showing the same symptoms - the memory lights come on for two (random) dimms on the front of the server and the health led turns red. sometimes the server stays up and running with no problems. othertimes the server locks dead and only a power reset can bring it back. there is nothing showing in the ilo logs and nothing within the vmware hardware monitoring. the memory has been replaced i've got other customers that have been running dl380g5's with out any issues on esx3.5 - this is our first vsphere deployment with them. these are meant to go live soon so any advice would be great. thanks in advance.

  Read the article

• Problem with Ctrl key on a hp 2510p

  - by Ernelli

  I have a tricky problem with my corporate Compaq hp 2510p, the ctrl key is not working properly at all times. I belive that it is hooked in some filter chain that processes certain ctrl+[key] combinations which is very annoying. I would like some pointers on how to proceed when analysing what application/setup can can cause this kind of keyboard filtering to happen. Anyway some more background info: Ctrl works together with X, C, V. Both in editors and terminals (Ctrl-C, Z etc) but Ctrl-Shift-Esc and Ctrl-Alt-Del does not work. Very annoying so my only option for logging in us using HP's security app. Shift-Arrow works for selecting text, but not Ctrl-shift arrow to select word by word, but Ctrl-Arrow works when moving the caret word by word. Now the strange thing is that everything works ok with an external USB keyboard so it might be the driver, but still, google yields 0 when searching for the problem description. I have vm-ware player installed (but not running it), HP Protect Tools installed, if any of these could affect the keyboard driver.

  Read the article

• Suspend not working after kernel update on an HP Envy14 1050

  - by leoxweb

  I just update ubuntu 12.04 to the kernel 3.2.0-30 and together with it a lot of packeges in the system. I am running it on an HP Envy14 1050. When I first made a fresh install of the clean ubuntu 12.04 I had the problem that when restoring from suspend the screen was black, although some backlight was there. I could fix it following this https://bugs.launchpad.net/ubuntu/+source/linux/+bug/989674/comments/20. Now, after the update the black screen after suspend has reappeared but with no backlight at all and the led in the caps lock key blinking. The laptop is using a ATI radeon 5600 with the privative drivers. During the update process there was an error with depmod . You can see the /var/log/dist-upgrade/apt-term.log file at the end. UPDATE: suspend is not working at all. The problem is not when restoring from suspend, but when I try to suspend the system it gets blocked and the fan running. Only option is to press power button. Log started: 2012-09-12 00:46:46 (Reading database ... 198909 files and directories currently installed.) Removing icedtea-7-jre-cacao ... Selecting previously unselected package linux-image-3.2.0-30-generic. (Reading database ... 198901 files and directories currently installed.) Unpacking linux-image-3.2.0-30-generic (from .../linux-image-3.2.0-30-generic_3.2.0-30.48_amd64.deb) ... Done. Preparing to replace icedtea-7-jre-jamvm 7~u3-2.1.1~pre1-1ubuntu3 (using .../icedtea-7-jre-jamvm_7u7-2.3.2-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement icedtea-7-jre-jamvm ... Preparing to replace openjdk-7-jre-lib 7~u3-2.1.1~pre1-1ubuntu3 (using .../openjdk-7-jre-lib_7u7-2.3.2-1ubuntu0.12.04.1_all.deb) ... Unpacking replacement openjdk-7-jre-lib ... Preparing to replace openjdk-7-jre-headless 7~u3-2.1.1~pre1-1ubuntu3 (using .../openjdk-7-jre-headless_7u7-2.3.2-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-7-jre-headless ... Preparing to replace python-problem-report 2.0.1-0ubuntu12 (using .../python-problem-report_2.0.1-0ubuntu13_all.deb) ... Unpacking replacement python-problem-report ... Preparing to replace python-apport 2.0.1-0ubuntu12 (using .../python-apport_2.0.1-0ubuntu13_all.deb) ... Unpacking replacement python-apport ... Preparing to replace apport 2.0.1-0ubuntu12 (using .../apport_2.0.1-0ubuntu13_all.deb) ... apport stop/waiting Unpacking replacement apport ... Preparing to replace apport-gtk 2.0.1-0ubuntu12 (using .../apport-gtk_2.0.1-0ubuntu13_all.deb) ... Unpacking replacement apport-gtk ... Preparing to replace firefox-globalmenu 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-globalmenu_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-globalmenu ... Preparing to replace firefox 15.0+build1-0ubuntu0.12.04.1 (using .../firefox_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox ... Preparing to replace firefox-gnome-support 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-gnome-support_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-gnome-support ... Preparing to replace firefox-locale-en 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-locale-en_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-locale-en ... Preparing to replace firefox-locale-es 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-locale-es_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-locale-es ... Preparing to replace firefox-locale-zh-hans 15.0+build1-0ubuntu0.12.04.1 (using .../firefox-locale-zh-hans_15.0.1+build1-0ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement firefox-locale-zh-hans ... Preparing to replace totem-mozilla 3.0.1-0ubuntu21 (using .../totem-mozilla_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement totem-mozilla ... Preparing to replace libtotem0 3.0.1-0ubuntu21 (using .../libtotem0_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement libtotem0 ... Preparing to replace totem-plugins 3.0.1-0ubuntu21 (using .../totem-plugins_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement totem-plugins ... Preparing to replace totem 3.0.1-0ubuntu21 (using .../totem_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement totem ... Preparing to replace totem-common 3.0.1-0ubuntu21 (using .../totem-common_3.0.1-0ubuntu21.1_all.deb) ... Unpacking replacement totem-common ... Preparing to replace gir1.2-totem-1.0 3.0.1-0ubuntu21 (using .../gir1.2-totem-1.0_3.0.1-0ubuntu21.1_amd64.deb) ... Unpacking replacement gir1.2-totem-1.0 ... Preparing to replace glib-networking-common 2.32.1-1ubuntu1 (using .../glib-networking-common_2.32.1-1ubuntu2_all.deb) ... Unpacking replacement glib-networking-common ... Preparing to replace glib-networking 2.32.1-1ubuntu1 (using .../glib-networking_2.32.1-1ubuntu2_amd64.deb) ... Unpacking replacement glib-networking ... Preparing to replace glib-networking-services 2.32.1-1ubuntu1 (using .../glib-networking-services_2.32.1-1ubuntu2_amd64.deb) ... Unpacking replacement glib-networking-services ... Preparing to replace linux-firmware 1.79 (using .../linux-firmware_1.79.1_all.deb) ... Unpacking replacement linux-firmware ... Preparing to replace linux-generic 3.2.0.29.31 (using .../linux-generic_3.2.0.30.32_amd64.deb) ... Unpacking replacement linux-generic ... Preparing to replace linux-image-generic 3.2.0.29.31 (using .../linux-image-generic_3.2.0.30.32_amd64.deb) ... Unpacking replacement linux-image-generic ... Selecting previously unselected package linux-headers-3.2.0-30. Unpacking linux-headers-3.2.0-30 (from .../linux-headers-3.2.0-30_3.2.0-30.48_all.deb) ... Selecting previously unselected package linux-headers-3.2.0-30-generic. Unpacking linux-headers-3.2.0-30-generic (from .../linux-headers-3.2.0-30-generic_3.2.0-30.48_amd64.deb) ... Preparing to replace linux-headers-generic 3.2.0.29.31 (using .../linux-headers-generic_3.2.0.30.32_amd64.deb) ... Unpacking replacement linux-headers-generic ... Preparing to replace linux-libc-dev 3.2.0-29.46 (using .../linux-libc-dev_3.2.0-30.48_amd64.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace openjdk-7-jre 7~u3-2.1.1~pre1-1ubuntu3 (using .../openjdk-7-jre_7u7-2.3.2-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-7-jre ... Preparing to replace openjdk-7-jdk 7~u3-2.1.1~pre1-1ubuntu3 (using .../openjdk-7-jdk_7u7-2.3.2-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-7-jdk ... Preparing to replace policykit-1-gnome 0.105-1ubuntu3 (using .../policykit-1-gnome_0.105-1ubuntu3.1_amd64.deb) ... Unpacking replacement policykit-1-gnome ... Preparing to replace xserver-xorg-input-synaptics 1.6.2-1ubuntu1~precise1 (using .../xserver-xorg-input-synaptics_1.6.2-1ubuntu1~precise2_amd64.deb) ... Unpacking replacement xserver-xorg-input-synaptics ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for hicolor-icon-theme ... Processing triggers for shared-mime-info ... Unknown media type in type 'all/all' Unknown media type in type 'all/allfiles' Unknown media type in type 'uri/mms' Unknown media type in type 'uri/mmst' Unknown media type in type 'uri/mmsu' Unknown media type in type 'uri/pnm' Unknown media type in type 'uri/rtspt' Unknown media type in type 'uri/rtspu' Processing triggers for man-db ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for gconf2 ... Processing triggers for libglib2.0-0:i386 ... Processing triggers for libglib2.0-0 ... Setting up linux-image-3.2.0-30-generic (3.2.0-30.48) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic update-initramfs: Generating /boot/initrd.img-3.2.0-30-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-30-generic Found initrd image: /boot/initrd.img-3.2.0-30-generic Found linux image: /boot/vmlinuz-3.2.0-29-generic Found initrd image: /boot/initrd.img-3.2.0-29-generic Found linux image: /boot/vmlinuz-3.2.0-23-generic Found initrd image: /boot/initrd.img-3.2.0-23-generic Found memtest86+ image: /boot/memtest86+.bin Found Windows 7 (loader) on /dev/sda1 Found Windows Recovery Environment (loader) on /dev/sda2 Found Windows Recovery Environment (loader) on /dev/sda3 done Setting up python-problem-report (2.0.1-0ubuntu13) ... Setting up python-apport (2.0.1-0ubuntu13) ... Setting up apport (2.0.1-0ubuntu13) ... apport start/running Setting up apport-gtk (2.0.1-0ubuntu13) ... Setting up firefox (15.0.1+build1-0ubuntu0.12.04.1) ... Please restart all running instances of firefox, or you will experience problems. Setting up firefox-globalmenu (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up firefox-gnome-support (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up firefox-locale-en (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up firefox-locale-es (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up firefox-locale-zh-hans (15.0.1+build1-0ubuntu0.12.04.1) ... Setting up libtotem0 (3.0.1-0ubuntu21.1) ... Setting up totem-common (3.0.1-0ubuntu21.1) ... Setting up totem (3.0.1-0ubuntu21.1) ... Setting up totem-mozilla (3.0.1-0ubuntu21.1) ... Setting up gir1.2-totem-1.0 (3.0.1-0ubuntu21.1) ... Setting up totem-plugins (3.0.1-0ubuntu21.1) ... Setting up glib-networking-common (2.32.1-1ubuntu2) ... Setting up glib-networking-services (2.32.1-1ubuntu2) ... Setting up glib-networking (2.32.1-1ubuntu2) ... Setting up linux-firmware (1.79.1) ... Setting up linux-image-generic (3.2.0.30.32) ... Setting up linux-generic (3.2.0.30.32) ... Setting up linux-headers-3.2.0-30 (3.2.0-30.48) ... Setting up linux-headers-3.2.0-30-generic (3.2.0-30.48) ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Setting up linux-headers-generic (3.2.0.30.32) ... Setting up linux-libc-dev (3.2.0-30.48) ... Setting up policykit-1-gnome (0.105-1ubuntu3.1) ... Setting up xserver-xorg-input-synaptics (1.6.2-1ubuntu1~precise2) ... Setting up openjdk-7-jre-headless (7u7-2.3.2-1ubuntu0.12.04.1) ... Installing new version of config file /etc/java-7-openjdk/security/java.security ... Installing new version of config file /etc/java-7-openjdk/jvm-amd64.cfg ... Setting up openjdk-7-jre-lib (7u7-2.3.2-1ubuntu0.12.04.1) ... Setting up icedtea-7-jre-jamvm (7u7-2.3.2-1ubuntu0.12.04.1) ... Setting up openjdk-7-jre (7u7-2.3.2-1ubuntu0.12.04.1) ... Setting up openjdk-7-jdk (7u7-2.3.2-1ubuntu0.12.04.1) ... update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/bin/jcmd to provide /usr/bin/jcmd (jcmd) in auto mode. Processing triggers for libc-bin ... ldconfig deferred processing now taking place Log ended: 2012-09-12 00:49:16

  Read the article

• Fan running continously on HP Pavillion G6 notebook with 12.04.1 LTS, help please?

  - by Ankit

  Fan is running continously on my HP Pavillion G6 notebook with 12.04.1 LTS. My system specifications are:- Ram: 6Gb Graphics Card:- 1 GB (AMD Raedon 64XX). HDD: 540 GB. Please find a list of ACPI errors logs from dmesg as follows:- buffer@ankit:~$ dmesg | grep ACPI -i [ 0.000000] BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data) [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000009cffe120 00084 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000009cfec000 0C132 (v01 HP 1670 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 000000009cf6c000 00040 [ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfea000 00D52 (v01 HP 1670 00001000 MSFT 01000013) [ 0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfe4000 00780 (v01 HP 1670 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP 1670 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfdd000 0219F (v01 HP 1670 00001000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.005902] ACPI: Core revision 20110623 [ 0.536006] PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes) [ 0.538423] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.538429] ACPI: bus type pci registered [ 0.656088] ACPI: Added _OSI(Module Device) [ 0.656094] ACPI: Added _OSI(Processor Device) [ 0.656098] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.656103] ACPI: Added _OSI(Processor Aggregator Device) [ 0.660335] ACPI: EC: Look up EC in DSDT [ 0.664416] ACPI: Executed 1 blocks of module-level executable AML code [ 0.728303] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.729536] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.730622] ACPI: Dynamic OEM Table Load: [ 0.730630] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.760829] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.761992] ACPI: Dynamic OEM Table Load: [ 0.761998] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.792451] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.793521] ACPI: Dynamic OEM Table Load: [ 0.793528] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.872981] ACPI: Interpreter enabled [ 0.872992] ACPI: (supports S0 S3 S4 S5) [ 0.873064] ACPI: Using IOAPIC for interrupt routing [ 0.882723] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.883072] ACPI: No dock devices found. [ 0.883084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.883882] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.924187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.924509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.924581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.924659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.924758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.924973] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.925064] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.925069] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.930212] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930327] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930436] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930547] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.930655] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.930764] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.930873] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930979] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.932142] PCI: Using ACPI for IRQ routing [ 0.967119] pnp: PnP ACPI init [ 0.967151] ACPI: bus type pnp registered [ 0.968356] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.968516] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.968586] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.968818] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.968915] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.969206] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.969293] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.969418] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.969528] pnp 00:08: Plug and Play ACPI device, IDs SYN1e3f SYN1e00 SYN0002 PNP0f13 (active) [ 0.969969] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.970574] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.970617] pnp: PnP ACPI: found 11 devices [ 0.970622] ACPI: ACPI bus type pnp unregistered [ 1.138064] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.138331] ACPI: AC Adapter [ACAD] (off-line) [ 1.139068] ACPI: Lid Switch [LID0] [ 1.139176] ACPI: Power Button [PWRB] [ 1.139286] ACPI: Power Button [PWRF] [ 1.144637] ACPI: Thermal Zone [TZ01] (0 C) [ 1.144677] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.144693] ACPI: Battery Slot [BAT0] (battery present) [ 1.206926] ACPI: Battery Slot [BAT0] (battery present) [ 13.176993] acpi device:1a: registered as cooling_device4 [ 13.179931] acpi device:1b: registered as cooling_device5 [ 13.180221] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 13.219589] acpi device:20: registered as cooling_device6 [ 13.220851] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1649.915134] i8042 aux 00:08: wake-up capability disabled by ACPI [ 1649.915147] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 1650.931028] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 1650.954743] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 1650.978733] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 1651.010950] ACPI: Preparing to enter system sleep state S3 [ 1652.251505] ACPI: Low-level resume complete [ 1652.360953] ACPI: Waking up from system sleep state S3 [ 1652.427581] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 1652.435579] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 1652.437887] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 1652.506660] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 1661.238234] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 1661.238253] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 1661.238268] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [ 3151.784288] i8042 aux 00:08: wake-up capability disabled by ACPI [ 3151.784301] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 3152.797676] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 3152.821379] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 3152.845367] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 3152.877600] ACPI: Preparing to enter system sleep state S3 [ 3154.313213] ACPI: Low-level resume complete [ 3154.422297] ACPI: Waking up from system sleep state S3 [ 3154.489692] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 3154.497667] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 3154.505947] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 3154.568985] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 3162.745149] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 3162.745168] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 3162.745183] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [ 6775.723501] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 6775.723519] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 6775.723535] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [10388.004760] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [10388.004778] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [10388.004801] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [10723.591930] i8042 aux 00:08: wake-up capability disabled by ACPI [10723.591942] i8042 kbd 00:07: wake-up capability enabled by ACPI [10724.607624] r8169 0000:03:00.0: wake-up capability enabled by ACPI [10724.631349] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [10724.655339] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [10724.687572] ACPI: Preparing to enter system sleep state S3 [10726.123176] ACPI: Low-level resume complete [10726.232181] ACPI: Waking up from system sleep state S3 [10726.303653] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [10726.311648] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [10726.315734] r8169 0000:03:00.0: wake-up capability disabled by ACPI [10726.379287] i8042 kbd 00:07: wake-up capability disabled by ACPI [10734.393523] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [10734.393542] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [10734.393557] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/ps Continuous sound from the fan is very annoying, any help would highly appreciated.

  Read the article

• Hard drives indication with controller MegaRAID SAS 9261-8i on HP Proliant DL320e Gen8. Is it possible?

  - by ame

  Give me advice, please. My situation: There're the server HP ProLiant DL320e Gen8 and MegaRAID SAS 9261-8i RAID Controller. I installed Controller into server and I reconnected Mini-SAS cord from block of hard drives to controller, but I haven't any indication of hard discs on server front panel. There's indication of activity of drives only during boot of server. Controller has 2-pin connector (JT6B3, SAS Activity LED header) but where and how can I connect it? Thanx.

  Read the article

• Discoverer 11g 11.1.1.2 Certified with EBS 12 on Five New Platforms

  - by Steven Chan

  Oracle Fusion Middleware 11g Release 1 includes Oracle Discoverer.  Discoverer is an ad-hoc query, reporting, analysis, and Web-publishing tool that allows end-users to work directly with Oracle E-Business Suite OLTP data.We certified Discoverer 11gR1 11.1.1.2 with the E-Business Suite Release 11i and 12 on Linux earlier this year.  Our Applications Platforms Group has just released five additional platform certifications for Discoverer 11.1.1.2 for Oracle E-Business Suite Release 12 (12.0.x and 12.1.x).Certified EBS 12 PlatformsLinux x86-64 (Oracle Enterprise Linux 4, 5) Linux x86-64 (RHEL 4, 5) Linux x86-64 (SLES 10) Oracle Solaris on SPARC (64-bit) (Solaris 9, 10) HP-UX Itanium (11.23, 11.31) HP-UX PA-RISC (64-bit) (11.23, 11.31) IBM AIX on Power Systems (64-bit) (5.3, 6.1) Microsoft Windows Server (32-bit) (2003, 2008)

  Read the article

• How to install hardware drivers for my laptop

  - by John Flisk

  Everytime I change the OS I usually format my laptop. It is an HP tx-2 Touchsmart. It has a touchscreen and additional hardware that isn't working (i.e. volume control buttons and the network discovery) If I was on windows I would just download the hardware drivers from the HP website. How do I go about installing the software for the built-in hardware of my laptop? I am new to the community and I really want to get this computer working like it used to, to get the full Ubuntu experience. Please direct me, thank you.

  Read the article

• Setting bluetooth passcode on a HP Notebook

  - by Glenn Slaven

  I've got a HP Compaq nx6320 & I just installed the HP bluetooth drivers (WinXP) and I'm trying to pair my Samsung Windows Mobile phone with it, but when I do, the phone asks me to enter the passcode for the computer, but I never set one in the install process & I've got no idea how to set it now. Does anyone know where this option is?

  Read the article

• HP DL380 reboot problems

  - by dvoina

  I have recently installed RHEL 5.3 on a HP DL 380 G5. Then I installed HP's PSP(Proliant Support Pack). Since then I cannot reboot the system anymore. The system just stays in "Broadcast message from root (tty0). The system is going for reboot NOW" Neither halt, poweroff, reboot nor init 6 works.

  Read the article

• enable Cisco switch to communicate withe HP switch

  - by moosas

  I have one CISCO 2906g and hp 2626 switches i link them by MM fiber optic cable, the problem the cant communicate with each other, i verify there is no problem with cable and JBC's. win i connect other HP switch in the other end it will communicate without any problem, but not with CISCO

  Read the article

• Assess BIOS on HP Pavilion xt966

  - by NitroxDM

  I'm attempting to change the boot device priority on a older HP. When it starts up it flashes a HP splash screen then just goes black with a blinking caret. I tried the suggestion of leaving it off for 5 sec then hitting F1. No dice. I'm using a USB keyboard. I might grab a PS2 and give it a go. Any other ideas?

  Read the article

• Software to measure power draw of HP Server

  - by tombull89

  I'm after some software to measure the power draw of a HP Server, namely a DL360 series. I know Nagios is used for logging and monitering but I'm not sure if it logs power usage as well. I've also tried to find the HP Server Management package but am not sure if this shows power usage either. I'm thinking my best bet would to buy some sort of device that goes inbetween the wall and the servers plug. Can anybody suggest what would do for me?

  Read the article

• rsh connection from Linux to HP times out.

  - by kadeshpa

  I added Linux boxes to /etc/hosts.equiv and .rhosts file for rsh connectivity to HP box. I am able to do rsh as root from Linux to HP. But if I run in a root shell as different user connection times out. Any reason?

  Read the article

• How do I create a Dynamic SCOM group that includes HP servers with a certain name

  - by makerofthings7

  I'd like to select servers that are HP servers and start with NYCEX*. I looked at the following HP group and the query appears like this: <Expression> <Contains> <MonitoringClass>$MPElement[Name="HewlettPackard.Servers.HPServer"]$</MonitoringClass> </Contains> </Expression> How do I recreate that query and include a filter for a naming pattern, or AD OU?

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >