Search Results

Search found 2281 results on 92 pages for 'kim guest'.

Page 19/92 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • How do I create a guest ftp user and give access to specific sub-folder with SSH?

    - by gourav
    I just got a virtual dedicated server at GoDaddy. I got the Simple Control Panel. There doesn't seem to be a way to create a guest ftp user through this control panel and I was told it must be created through SSH. I have a program called Putty which can log into the server via SSH. I'm familiar with logging in but does anyone know what the commands are to be used to create a guest ftp user and give them Read and Write access to a particular folder? Regards gourav

    Read the article

  • Hyper-V and host-installed hardware devices: can guest VMs access?

    - by gravyface
    Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have alot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

    Read the article

  • VMWare workstation: guest OS becomes sluggish after being idle for 12+ hours?

    - by GenEric35
    Hi, My VM becomes sluggish after a few hours(~12 hours or so) of being idle, there is no impact on the host, just the gueste. The guest OS becomes sluggish. It has lots of RAM, runs on Raid 0, quad core i5 750, everything is defragged, but the only way I found to keep it's responsiveness optimal is to shutdown(dumps the memory) and the start; a restart of the guest OS doesnt dump the memory so I need to be able to do a stop of the VM, and then a start. Coming from Hyper-V I had to learn VMWare and after a few months of fine tunning it I'm quite impressed with how configurable VMWare is. This is the only small issue I haven't been able to fix, has anyone encountered this?

    Read the article

  • While in CMD shell, copying files from host OS to guest VM locks files (VMware Player/Workstation)

    - by Malcolm
    We're running the latest versions of VMWare Player and Workstation for Windows. The following behavior is identical across both products. Problem: We open a CMD prompt in our guest OS (XP, Vista, Windows 7) and copy files from our host OS using the standard CMD shell copy command: copy z:\C$\testfiles The copy completes successfully, but from that point forward, all the files that were copied to our guest OS are now LOCKED on our host OS. This does not happen if we use Windows Explorer to copy files - it only happens when files are copied via the CMD shell. As mentioned at the start of this question, this behavior is reproducible in both VMWare Player and VMWare Workstation across multiple machines and multiple guest OS's. I've googled for a workaround, but without success. Any ideas appreciated. Malcolm

    Read the article

  • Local Group Policy Editor reverting setting to default

    - by Timur Aydin
    On my Windows 7 Ultimate 32bit system, I have changed the following setting: Local Computer Policy - Computer Configuration - Windows Settings - Security Settings - Local Policies - User Right Assignment - Deny access to this computer from the network This setting was by default "Guest" and I deleted this so that Guest can access a defined network share over the LAN. But later, I have changed my mind and wanted to return this setting to its default. So I edited that setting and specified Guest. But the setting became MYWINPC\Guest. So my question is, what is the difference between the previous setting "Guest" and MYWINPC\Guest? And how do I return this setting to its default value, "Guest"?

    Read the article

  • Hyper-V and host-installed hardware devices: can guest VMs access?

    - by gravyface
    Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have a lot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

    Read the article

  • How to map a VPN (tun0) network adapter on host Ubuntu to a VirtualBox guest Windows?

    - by Mashimom
    I have a Ubuntu 10.04 running Oracle VirtualBox 3.2.6 with a Windows XP guest. I use a VPN that I would like to be accessed by the guest VM, on a ifconfig it shows as: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.192.10.99 P-t-P:5.192.10.99 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1362 Metric:1 RX packets:14151 errors:0 dropped:0 overruns:0 frame:0 TX packets:19860 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4415271 (4.4 MB) TX bytes:17949982 (17.9 MB) Using NAT or Bridge adapters on the VM only gives me the non-vpn adapter. How can I map the tun0 adapter to VirtualBox?

    Read the article

  • Clone current host OS to a guest virtual machine.

    - by ProfKaos
    I would like to run a few repeated checks on a setup procedure I am documenting, to verify my document. I would like to somehow create a VM that replicates the environment on my machine, i.e. the host machine, onto a guest VM. Then I can use Windows' System Restore on the guest to start at the point before I commenced the setup procedure and repeat it as many times as required until no more trial-and-error etc. is required to supplement my document. I have Virtual PC and VirtualBox available to install as host environments, running on Windows 7 Professional.

    Read the article

  • Can an ESX server under heavy load cause cpu spikes on guest VM's?

    - by ReferentiallySeethru
    So we have a number of vm's running on an ESX 4.1 server for product testing. The ESX Server is at times under heavy load. We've been experiencing high CPU levels during some use cases, but we can't always duplicate this. If the ESX server as a whole is under heavy load could this cause guest machines to show high CPU usage? To ask it a different way, if the guest machines require more cpu resources than the server has, how does this affect CPU usage as indicated by the OS and process?

    Read the article

  • VirtualBox: Why are some USB devices disabled?

    - by torbengb
    Overview: My Host OS is Ubuntu 10.10 and guest OS is WinXP on the VirtualBox version downloaded from Oracle including "VirtualBox 4.0 Oracle VM VirtualBox Extension Pack" so that USB passthrough works. This works in general (I was able to back up my iPhone to iTunes in the guest OS), but some devices aren't available even though they're ptrovided in the VirtualBox settings. Specifics: In the VirtualBox settings for the guest OS, there's the part where you can select which of your USB devices should be visible to the guest OS. I've selected several devices including the iPhone. So far so good. Then an iOS upgrade came along; my iPhone is now in DFU mode (or recovery mode?) and represents itself not as "iPhone" but as "iPhone (DFU mode)". I have now also added this device to the list of USB devices that the guest OS should see -- but it doesn't see this device. Questions: Am I right in expecting that the guest OS ought to see the DFU device when I add it in the VirtualBox settings? What steps do I need to take so that the guest OS will really see the DFU device?

    Read the article

  • SQL SERVER – Another lesser known feature of SQL Server Management Studio 2012 – Guest Post by Balmukund Lakhani

    - by Pinal Dave
    This is a fantastic blog post from my dear friend Balmukund ( blog | twitter | facebook ). He had presented a fantastic session in our last UG and there were lots of requests from attendees that he blogs about it. Well, here is the blog post about the same very popular UG session. Let us read the entire blog post in the voice of the Balmukund himself. In one of my previous guest blog on SQL Authority, I wrote about “Additional Connection Parameter” tab of login screen in SQL Server Management Studio (a.k.a. SSMS). On the similar lines, this blog is going to show little less known new feature of login main screen (“Connect to Server”) of SSMS 2012. You might have seen below screen countless times and you might wonder what is there is blog about in this simple screen. Well, continue reading and you would get the answer. Many times, DBA have to login to production server from non-regular machine, may be a developer’s workstation. Once you login to SQL, do your work and close the management studio. Do you know that your server name is saved in management studio? Of course, very useful feature because you may not like to type server name/IP address every time. Whatever servers you have connected, it would be stored by management studio. But sometime, it’s annoying! What you would do if you want SQL Server Management Studio to forget “all” the servers listed in drop down of Server name? To do that, you need to know how and where it’s stored. You can use one of my favorite tool from sysinternals called Process Monitor (also known as ProcMon) and easily figure out that this is stored in a file under your windows user profile. Below is the file in SQL 2008 R2 Management Studio. %appdata%\Microsoft\Microsoft SQL Server\100\Tools\Shell\SqlStudio.bin For SQL Server 2012, here is what we can see in ProcMon So, the path is %appdata%\Microsoft\Microsoft SQL Server\110\Tools\Shell\SqlStudio.bin So far, you might wonder, where is the new feature? I have been asked by many users to delete entries from SSMS “Connect to Server” server name list. Well, unofficially, you can delete the file directly which we found via ProcMon. Note that delete file to get rid of server list is not officially supported by Microsoft. Better way to achieve this is provided in SSMS 2012. To delete the servers from the list, highlight the name we want to delete (via keyboard or mouse) and then press delete key via keyboard. We can’t be multi-select and has to be done one by one. We can delete as many entries we want. I have delete few from first screenshot taken and here is the modified version. This is not available in SQL 2008 R2 and its previous version. This came from feedback given to SQL Server Product group. Hope you have learned something new today! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Big Data – Is Big Data Relevant to me? – Big Data Questionnaires – Guest Post by Vinod Kumar

    - by Pinal Dave
    This guest post is by Vinod Kumar. Vinod Kumar has worked with SQL Server extensively since joining the industry over a decade ago. Working on various versions of SQL Server 7.0, Oracle 7.3 and other database technologies – he now works with the Microsoft Technology Center (MTC) as a Technology Architect. Let us read the blog post in Vinod’s own voice. I think the series from Pinal is a good one for anyone planning to start on Big Data journey from the basics. In my daily customer interactions this buzz of “Big Data” always comes up, I react generally saying – “Sir, do you really have a ‘Big Data’ problem or do you have a big Data problem?” Generally, there is a silence in the air when I ask this question. Data is everywhere in organizations – be it big data, small data, all data and for few it is bad data which is same as no data :). Wow, don’t discount me as someone who opposes “Big Data”, I am a big supporter as much as I am a critic of the abuse of this term by the people. In this post, I wanted to let my mind flow so that you can also think in the direction I want you to see these concepts. In any case, this is not an exhaustive dump of what is in my mind – but you will surely get the drift how I am going to question Big Data terms from customers!!! Is Big Data Relevant to me? Many of my customers talk to me like blank whiteboard with no idea – “why Big Data”. They want to jump into the bandwagon of technology and they want to decipher insights from their unexplored data a.k.a. unstructured data with structured data. So what are these industry scenario’s that come to mind? Here are some of them: Financials Fraud detection: Banks and Credit cards are monitoring your spending habits on real-time basis. Customer Segmentation: applies in every industry from Banking to Retail to Aviation to Utility and others where they deal with end customer who consume their products and services. Customer Sentiment Analysis: Responding to negative brand perception on social or amplify the positive perception. Sales and Marketing Campaign: Understand the impact and get closer to customer delight. Call Center Analysis: attempt to take unstructured voice recordings and analyze them for content and sentiment. Medical Reduce Re-admissions: How to build a proactive follow-up engagements with patients. Patient Monitoring: How to track Inpatient, Out-Patient, Emergency Visits, Intensive Care Units etc. Preventive Care: Disease identification and Risk stratification is a very crucial business function for medical. Claims fraud detection: There is no precise dollars that one can put here, but this is a big thing for the medical field. Retail Customer Sentiment Analysis, Customer Care Centers, Campaign Management. Supply Chain Analysis: Every sensors and RFID data can be tracked for warehouse space optimization. Location based marketing: Based on where a check-in happens retail stores can be optimize their marketing. Telecom Price optimization and Plans, Finding Customer churn, Customer loyalty programs Call Detail Record (CDR) Analysis, Network optimizations, User Location analysis Customer Behavior Analysis Insurance Fraud Detection & Analysis, Pricing based on customer Sentiment Analysis, Loyalty Management Agents Analysis, Customer Value Management This list can go on to other areas like Utility, Manufacturing, Travel, ITES etc. So as you can see, there are obviously interesting use cases for each of these industry verticals. These are just representative list. Where to start? A lot of times I try to quiz customers on a number of dimensions before starting a Big Data conversation. Are you getting the data you need the way you want it and in a timely manner? Can you get in and analyze the data you need? How quickly is IT to respond to your BI Requests? How easily can you get at the data that you need to run your business/department/project? How are you currently measuring your business? Can you get the data you need to react WITHIN THE QUARTER to impact behaviors to meet your numbers or is it always “rear-view mirror?” How are you measuring: The Brand Customer Sentiment Your Competition Your Pricing Your performance Supply Chain Efficiencies Predictive product / service positioning What are your key challenges of driving collaboration across your global business?  What the challenges in innovation? What challenges are you facing in getting more information out of your data? Note: Garbage-in is Garbage-out. Hold good for all reporting / analytics requirements Big Data POCs? A number of customers get into the realm of setting a small team to work on Big Data – well it is a great start from an understanding point of view, but I tend to ask a number of other questions to such customers. Some of these common questions are: To what degree is your advanced analytics (natural language processing, sentiment analysis, predictive analytics and classification) paired with your Big Data’s efforts? Do you have dedicated resources exploring the possibilities of advanced analytics in Big Data for your business line? Do you plan to employ machine learning technology while doing Advanced Analytics? How is Social Media being monitored in your organization? What is your ability to scale in terms of storage and processing power? Do you have a system in place to sort incoming data in near real time by potential value, data quality, and use frequency? Do you use event-driven architecture to manage incoming data? Do you have specialized data services that can accommodate different formats, security, and the management requirements of multiple data sources? Is your organization currently using or considering in-memory analytics? To what degree are you able to correlate data from your Big Data infrastructure with that from your enterprise data warehouse? Have you extended the role of Data Stewards to include ownership of big data components? Do you prioritize data quality based on the source system (that is Facebook/Twitter data has lower quality thresholds than radio frequency identification (RFID) for a tracking system)? Do your retention policies consider the different legal responsibilities for storing Big Data for a specific amount of time? Do Data Scientists work in close collaboration with Data Stewards to ensure data quality? How is access to attributes of Big Data being given out in the organization? Are roles related to Big Data (Advanced Analyst, Data Scientist) clearly defined? How involved is risk management in the Big Data governance process? Is there a set of documented policies regarding Big Data governance? Is there an enforcement mechanism or approach to ensure that policies are followed? Who is the key sponsor for your Big Data governance program? (The CIO is best) Do you have defined policies surrounding the use of social media data for potential employees and customers, as well as the use of customer Geo-location data? How accessible are complex analytic routines to your user base? What is the level of involvement with outside vendors and third parties in regard to the planning and execution of Big Data projects? What programming technologies are utilized by your data warehouse/BI staff when working with Big Data? These are some of the important questions I ask each customer who is actively evaluating Big Data trends for their organizations. These questions give you a sense of direction where to start, what to use, how to secure, how to analyze and more. Sign off Any Big data is analysis is incomplete without a compelling story. The best way to understand this is to watch Hans Rosling – Gapminder (2:17 to 6:06) videos about the third world myths. Don’t get overwhelmed with the Big Data buzz word, the destination to what your data speaks is important. In this blog post, we did not particularly look at any Big Data technologies. This is a set of questionnaire one needs to keep in mind as they embark their journey of Big Data. I did write some of the basics in my blog: Big Data – Big Hype yet Big Opportunity. Do let me know if these questions make sense?  Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • Oracle Solaris: Zones on Shared Storage

    - by Jeff Victor
    Oracle Solaris 11.1 has several new features. At oracle.com you can find a detailed list. One of the significant new features, and the most significant new feature releated to Oracle Solaris Zones, is casually called "Zones on Shared Storage" or simply ZOSS (rhymes with "moss"). ZOSS offers much more flexibility because you can store Solaris Zones on shared storage (surprise!) so that you can perform quick and easy migration of a zone from one system to another. This blog entry describes and demonstrates the use of ZOSS. ZOSS provides complete support for a Solaris Zone that is stored on "shared storage." In this case, "shared storage" refers to fiber channel (FC) or iSCSI devices, although there is one lone exception that I will demonstrate soon. The primary intent is to enable you to store a zone on FC or iSCSI storage so that it can be migrated from one host computer to another much more easily and safely than in the past. With this blog entry, I wanted to make it easy for you to try this yourself. I couldn't assume that you have a SAN available - which is a good thing, because neither do I! What could I use, instead? [There he goes, foreshadowing again... -Ed.] Developing this entry reinforced the lesson that the solution to every lab problem is VirtualBox. Oracle VM VirtualBox (its formal name) helps here in a couple of important ways. It offers the ability to easily install multiple copies of Solaris as guests on top of any popular system (Microsoft Windows, MacOS, Solaris, Oracle Linux (and other Linuxes) etc.). It also offers the ability to create a separate virtual disk drive (VDI) that appears as a local hard disk to a guest. This virtual disk can be moved very easily from one guest to another. In other words, you can follow the steps below on a laptop or larger x86 system. Please note that the ability to use ZOSS to store a zone on a local disk is very useful for a lab environment, but not so useful for production. I do not suggest regularly moving disk drives among computers. In the method I describe below, that virtual hard disk will contain the zone that will be migrated among the (virtual) hosts. In production, you would use FC or iSCSI LUNs instead. The zonecfg(1M) man page details the syntax for each of the three types of devices. Why Migrate? Why is the migration of virtual servers important? Some of the most common reasons are: Moving a workload to a different computer so that the original computer can be turned off for extensive maintenance. Moving a workload to a larger system because the workload has outgrown its original system. If the workload runs in an environment (such as a Solaris Zone) that is stored on shared storage, you can restore the service of the workload on an alternate computer if the original computer has failed and will not reboot. You can simplify lifecycle management of a workload by developing it on a laptop, migrating it to a test platform when it's ready, and finally moving it to a production system. Concepts For ZOSS, the important new concept is named "rootzpool". You can read about it in the zonecfg(1M) man page, but here's the short version: it's the backing store (hard disk(s), or LUN(s)) that will be used to make a ZFS zpool - the zpool that will hold the zone. This zpool: contains the zone's Solaris content, i.e. the root file system does not contain any content not related to the zone can only be mounted by one Solaris instance at a time Method Overview Here is a brief list of the steps to create a zone on shared storage and migrate it. The next section shows the commands and output. You will need a host system with an x86 CPU (hopefully at least a couple of CPU cores), at least 2GB of RAM, and at least 25GB of free disk space. (The steps below will not actually use 25GB of disk space, but I don't want to lead you down a path that ends in a big sign that says "Your HDD is full. Good luck!") Configure the zone on both systems, specifying the rootzpool that both will use. The best way is to configure it on one system and then copy the output of "zonecfg export" to the other system to be used as input to zonecfg. This method reduces the chances of pilot error. (It is not necessary to configure the zone on both systems before creating it. You can configure this zone in multiple places, whenever you want, and migrate it to one of those places at any time - as long as those systems all have access to the shared storage.) Install the zone on one system, onto shared storage. Boot the zone. Provide system configuration information to the zone. (In the Real World(tm) you will usually automate this step.) Shutdown the zone. Detach the zone from the original system. Attach the zone to its new "home" system. Boot the zone. The zone can be used normally, and even migrated back, or to a different system. Details The rest of this shows the commands and output. The two hostnames are "sysA" and "sysB". Note that each Solaris guest might use a different device name for the VDI that they share. I used the device names shown below, but you must discover the device name(s) after booting each guest. In a production environment you would also discover the device name first and then configure the zone with that name. Fortunately, you can use the command "zpool import" or "format" to discover the device on the "new" host for the zone. The first steps create the VirtualBox guests and the shared disk drive. I describe the steps here without demonstrating them. Download VirtualBox and install it using a method normal for your host OS. You can read the complete instructions. Create two VirtualBox guests, each to run Solaris 11.1. Each will use its own VDI as its root disk. Install Solaris 11.1 in each guest.Install Solaris 11.1 in each guest. To install a Solaris 11.1 guest, you can either download a pre-built VirtualBox guest, and import it, or install Solaris 11.1 from the "text install" media. If you use the latter method, after booting you will not see a windowing system. To install the GUI and other important things, login and run "pkg install solaris-desktop" and take a break while it installs those important things. Life is usually easier if you install the VirtualBox Guest Additions because then you can copy and paste between the host and guests, etc. You can find the guest additions in the folder matching the version of VirtualBox you are using. You can also read the instructions for installing the guest additions. To create the zone's shared VDI in VirtualBox, you can open the storage configuration for one of the two guests, select the SATA controller, and click on the "Add Hard Disk" icon nearby. Choose "Create New Disk" and specify an appropriate path name for the file that will contain the VDI. The shared VDI must be at least 1.5 GB. Note that the guest must be stopped to do this. Add that VDI to the other guest - using its Storage configuration - so that each can access it while running. The steps start out the same, except that you choose "Choose Existing Disk" instead of "Create New Disk." Because the disk is configured on both of them, VirtualBox prevents you from running both guests at the same time. Identify device names of that VDI, in each of the guests. Solaris chooses the name based on existing devices. The names may be the same, or may be different from each other. This step is shown below as "Step 1." Assumptions In the example shown below, I make these assumptions. The guest that will own the zone at the beginning is named sysA. The guest that will own the zone after the first migration is named sysB. On sysA, the shared disk is named /dev/dsk/c7t2d0 On sysB, the shared disk is named /dev/dsk/c7t3d0 (Finally!) The Steps Step 1) Determine the name of the disk that will move back and forth between the systems. root@sysA:~# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,2829@d/disk@0,0 1. c7t2d0 /pci@0,0/pci8086,2829@d/disk@2,0 Specify disk (enter its number): ^D Step 2) The first thing to do is partition and label the disk. The magic needed to write an EFI label is not overly complicated. root@sysA:~# format -e c7t2d0 selecting c7t2d0 [disk formatted] FORMAT MENU: ... format fdisk No fdisk table exists. The default partition for the disk is: a 100% "SOLARIS System" partition Type "y" to accept the default partition, otherwise type "n" to edit the partition table. n SELECT ONE OF THE FOLLOWING: ... Enter Selection: 1 ... G=EFI_SYS 0=Exit? f SELECT ONE... ... 6 format label ... Specify Label type[1]: 1 Ready to label disk, continue? y format quit root@sysA:~# ls /dev/dsk/c7t2d0 /dev/dsk/c7t2d0 Step 3) Configure zone1 on sysA. root@sysA:~# zonecfg -z zone1 Use 'create' to begin configuring a new zone. zonecfg:zone1 create create: Using system default template 'SYSdefault' zonecfg:zone1 set zonename=zone1 zonecfg:zone1 set zonepath=/zones/zone1 zonecfg:zone1 add rootzpool zonecfg:zone1:rootzpool add storage dev:dsk/c7t2d0 zonecfg:zone1:rootzpool end zonecfg:zone1 exit root@sysA:~# oot@sysA:~# zonecfg -z zone1 info zonename: zone1 zonepath: /zones/zone1 brand: solaris autoboot: false bootargs: file-mac-profile: pool: limitpriv: scheduling-class: ip-type: exclusive hostid: fs-allowed: anet: ... rootzpool: storage: dev:dsk/c7t2d0 Step 4) Install the zone. This step takes the most time, but you can wander off for a snack or a few laps around the gym - or both! (Just not at the same time...) root@sysA:~# zoneadm -z zone1 install Created zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T163634Z.zone1.install Image: Preparing at /zones/zone1/root. AI Manifest: /tmp/manifest.xml.RXaycg SC Profile: /usr/share/auto_install/sc_profiles/enable_sci.xml Zonename: zone1 Installation: Starting ... Creating IPS image Startup linked: 1/1 done Installing packages from: solaris origin: http://pkg.us.oracle.com/support/ DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 183/183 33556/33556 222.2/222.2 2.8M/s PHASE ITEMS Installing new actions 46825/46825 Updating package state database Done Updating image state Done Creating fast lookup database Done Installation: Succeeded Note: Man pages can be obtained by installing pkg:/system/manual done. Done: Installation completed in 1696.847 seconds. Next Steps: Boot the zone, then log into the zone console (zlogin -C) to complete the configuration process. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T163634Z.zone1.install Step 5) Boot the Zone. root@sysA:~# zoneadm -z zone1 boot Step 6) Login to zone's console to complete the specification of system information. root@sysA:~# zlogin -C zone1 Answer the usual questions and wait for a login prompt. Then you can end the console session with the usual "~." incantation. Step 7) Shutdown the zone so it can be "moved." root@sysA:~# zoneadm -z zone1 shutdown Step 8) Detach the zone so that the original global zone can't use it. root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 installed /zones/zone1 solaris excl root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - zone1_rpool 1.98G 484M 1.51G 23% 1.00x ONLINE - root@sysA:~# zoneadm -z zone1 detach Exported zone zpool: zone1_rpool Step 9) Review the result and shutdown sysA so that sysB can use the shared disk. root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysA:~# init 0 Step 10) Now boot sysB and configure a zone with the parameters shown above in Step 1. (Again, the safest method is to use "zonecfg ... export" on sysA as described in section "Method Overview" above.) The one difference is the name of the rootzpool storage device, which was shown in the list of assumptions, and which you must determine by booting sysB and using the "format" or "zpool import" command. When that is done, you should see the output shown next. (I used the same zonename - "zone1" - in this example, but you can choose any valid zonename you want.) root@sysB:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysB:~# zonecfg -z zone1 info zonename: zone1 zonepath: /zones/zone1 brand: solaris autoboot: false bootargs: file-mac-profile: pool: limitpriv: scheduling-class: ip-type: exclusive hostid: fs-allowed: anet: linkname: net0 ... rootzpool: storage: dev:dsk/c7t3d0 Step 11) Attaching the zone automatically imports the zpool. root@sysB:~# zoneadm -z zone1 attach Imported zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T184034Z.zone1.attach Installing: Using existing zone boot environment Zone BE root dataset: zone1_rpool/rpool/ROOT/solaris Cache: Using /var/pkg/publisher. Updating non-global zone: Linking to image /. Processing linked: 1/1 done Updating non-global zone: Auditing packages. No updates necessary for this image. Updating non-global zone: Zone updated. Result: Attach Succeeded. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T184034Z.zone1.attach root@sysB:~# zoneadm -z zone1 boot root@sysB:~# zlogin zone1 [Connected to zone 'zone1' pts/2] Oracle Corporation SunOS 5.11 11.1 September 2012 Step 12) Now let's migrate the zone back to sysA. Create a file in zone1 so we can verify it exists after we migrate the zone back, then begin migrating it back. root@zone1:~# ls /opt root@zone1:~# touch /opt/fileA root@zone1:~# ls -l /opt/fileA -rw-r--r-- 1 root root 0 Oct 22 14:47 /opt/fileA root@zone1:~# exit logout [Connection to zone 'zone1' pts/2 closed] root@sysB:~# zoneadm -z zone1 shutdown root@sysB:~# zoneadm -z zone1 detach Exported zone zpool: zone1_rpool root@sysB:~# init 0 Step 13) Back on sysA, check the status. Oracle Corporation SunOS 5.11 11.1 September 2012 root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - Step 14) Re-attach the zone back to sysA. root@sysA:~# zoneadm -z zone1 attach Imported zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T190441Z.zone1.attach Installing: Using existing zone boot environment Zone BE root dataset: zone1_rpool/rpool/ROOT/solaris Cache: Using /var/pkg/publisher. Updating non-global zone: Linking to image /. Processing linked: 1/1 done Updating non-global zone: Auditing packages. No updates necessary for this image. Updating non-global zone: Zone updated. Result: Attach Succeeded. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T190441Z.zone1.attach root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - zone1_rpool 1.98G 491M 1.51G 24% 1.00x ONLINE - root@sysA:~# zoneadm -z zone1 boot root@sysA:~# zlogin zone1 [Connected to zone 'zone1' pts/2] Oracle Corporation SunOS 5.11 11.1 September 2012 root@zone1:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 1.98G 538M 1.46G 26% 1.00x ONLINE - Step 15) Check for the file created on sysB, earlier. root@zone1:~# ls -l /opt total 1 -rw-r--r-- 1 root root 0 Oct 22 14:47 fileA Next Steps Here is a brief list of some of the fun things you can try next. Add space to the zone by adding a second storage device to the rootzpool. Make sure that you add it to the configurations of both zones! Create a new zone, specifying two disks in the rootzpool when you first configure the zone. When you install that zone, or clone it from another zone, zoneadm uses those two disks to create a mirrored pool. (Three disks will result in a three-way mirror, etc.) Conclusion Hopefully you have seen the ease with which you can now move Solaris Zones from one system to another.

    Read the article

  • SQL SERVER – Thinking about Deprecated, Discontinued Features and Breaking Changes while Upgrading to SQL Server 2012 – Guest Post by Nakul Vachhrajani

    - by pinaldave
    Nakul Vachhrajani is a Technical Specialist and systems development professional with iGATE having a total IT experience of more than 7 years. Nakul is an active blogger with BeyondRelational.com (150+ blogs), and can also be found on forums at SQLServerCentral and BeyondRelational.com. Nakul has also been a guest columnist for SQLAuthority.com and SQLServerCentral.com. Nakul presented a webcast on the “Underappreciated Features of Microsoft SQL Server” at the Microsoft Virtual Tech Days Exclusive Webcast series (May 02-06, 2011) on May 06, 2011. He is also the author of a research paper on Database upgrade methodologies, which was published in a CSI journal, published nationwide. In addition to his passion about SQL Server, Nakul also contributes to the academia out of personal interest. He visits various colleges and universities as an external faculty to judge project activities being carried out by the students. Disclaimer: The opinions expressed herein are his own personal opinions and do not represent his employer’s view in anyway. Blog | LinkedIn | Twitter | Google+ Let us hear the thoughts of Nakul in first person - Those who have been following my blogs would be aware that I am recently running a series on the database engine features that have been deprecated in Microsoft SQL Server 2012. Based on the response that I have received, I was quite surprised to know that most of the audience found these to be breaking changes, when in fact, they were not! It was then that I decided to write a little piece on how to plan your database upgrade such that it works with the next version of Microsoft SQL Server. Please note that the recommendations made in this article are high-level markers and are intended to help you think over the specific steps that you would need to take to upgrade your database. Refer the documentation – Understand the terms Change is the only constant in this world. Therefore, whenever customer requirements, newer architectures and designs require software vendors to make a change to the keywords, functions, etc; they ensure that they provide their end users sufficient time to migrate over to the new standards before dropping off the old ones. Microsoft does that too with it’s Microsoft SQL Server product. Whenever a new SQL Server release is announced, it comes with a list of the following features: Breaking changes These are changes that would break your currently running applications, scripts or functionalities that are based on earlier version of Microsoft SQL Server These are mostly features whose behavior has been changed keeping in mind the newer architectures and designs Lesson: These are the changes that you need to be most worried about! Discontinued features These features are no longer available in the associated version of Microsoft SQL Server These features used to be “deprecated” in the prior release Lesson: Without these changes, your database would not be compliant/may not work with the version of Microsoft SQL Server under consideration Deprecated features These features are those that are still available in the current version of Microsoft SQL Server, but are scheduled for removal in a future version. These may be removed in either the next version or any other future version of Microsoft SQL Server The features listed for deprecation will compose the list of discontinued features in the next version of SQL Server Lesson: Plan to make necessary changes required to remove/replace usage of the deprecated features with the latest recommended replacements Once a feature appears on the list, it moves from bottom to the top, i.e. it is first marked as “Deprecated” and then “Discontinued”. We know of “Breaking change” comes later on in the product life cycle. What this means is that if you want to know what features would not work with SQL Server 2012 (and you are currently using SQL Server 2008 R2), you need to refer the list of breaking changes and discontinued features in SQL Server 2012. Use the tools! There are a lot of tools and technologies around us, but it is rarely that I find teams using these tools religiously and to the best of their potential. Below are the top two tools, from Microsoft, that I use every time I plan a database upgrade. The SQL Server Upgrade Advisor Ever since SQL Server 2005 was announced, Microsoft provides a small, very light-weight tool called the “SQL Server upgrade advisor”. The upgrade advisor analyzes installed components from earlier versions of SQL Server, and then generates a report that identifies issues to fix either before or after you upgrade. The analysis examines objects that can be accessed, such as scripts, stored procedures, triggers, and trace files. Upgrade Advisor cannot analyze desktop applications or encrypted stored procedures. Refer the links towards the end of the post to know how to get the Upgrade Advisor. The SQL Server Profiler Another great tool that you can use is the one most SQL Server developers & administrators use often – the SQL Server profiler. SQL Server Profiler provides functionality to monitor the “Deprecation” event, which contains: Deprecation announcement – equivalent to features to be deprecated in a future release of SQL Server Deprecation final support – equivalent to features to be deprecated in the next release of SQL Server You can learn more using the links towards the end of the post. A basic checklist There are a lot of finer points that need to be taken care of when upgrading your database. But, it would be worth-while to identify a few basic steps in order to make your database compliant with the next version of SQL Server: Monitor the current application workload (on a test bed) via the Profiler in order to identify usage of features marked as Deprecated If none appear, you are all set! (This almost never happens) Note down all the offending queries and feature usages Run analysis sessions using the SQL Server upgrade advisor on your database Based on the inputs from the analysis report and Profiler trace sessions, Incorporate solutions for the breaking changes first Next, incorporate solutions for the discontinued features Revisit and document the upgrade strategy for your deployment scenarios Revisit the fall-back, i.e. rollback strategies in case the upgrades fail Because some programming changes are dependent upon the SQL server version, this may need to be done in consultation with the development teams Before any other enhancements are incorporated by the development team, send out the database changes into QA QA strategy should involve a comparison between an environment running the old version of SQL Server against the new one Because minimal application changes have gone in (essential changes for SQL Server version compliance only), this would be possible As an ongoing activity, keep incorporating changes recommended as per the deprecated features list As a DBA, update your coding standards to ensure that the developers are using ANSI compliant code – this code will require a change only if the ANSI standard changes Remember this: Change management is a continuous process. Keep revisiting the product release notes and incorporate recommended changes to stay prepared for the next release of SQL Server. May the power of SQL Server be with you! Links Referenced in this post Breaking changes in SQL Server 2012: Link Discontinued features in SQL Server 2012: Link Get the upgrade advisor from the Microsoft Download Center at: Link Upgrade Advisor page on MSDN: Link Profiler: Review T-SQL code to identify objects no longer supported by Microsoft: Link Upgrading to SQL Server 2012 by Vinod Kumar: Link Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Upgrade

    Read the article

  • Guest Post: Using IronRuby and .NET to produce the &lsquo;Hello World of WPF&rsquo;

    - by Eric Nelson
    [You might want to also read other GuestPosts on my blog – or contribute one?] On the 26th and 27th of March (2010) myself and Edd Morgan of Microsoft will be popping along to the Scottish Ruby Conference. I dabble with Ruby and I am a huge fan whilst Edd is a “proper Ruby developer”. Hence I asked Edd if he was interested in creating a guest post or two for my blog on IronRuby. This is the second of those posts. If you should stumble across this post and happen to be attending the Scottish Ruby Conference, then please do keep a look out for myself and Edd. We would both love to chat about all things Ruby and IronRuby. And… we should have (if Amazon is kind) a few books on IronRuby with us at the conference which will need to find a good home. This is me and Edd and … the book: Order on Amazon: http://bit.ly/ironrubyunleashed Using IronRuby and .NET to produce the ‘Hello World of WPF’ In my previous post I introduced, to a minor extent, IronRuby. I expanded a little on the basics of by getting a Rails app up-and-running on this .NET implementation of the Ruby language — but there wasn't much to it! So now I would like to go from simply running a pre-existing project under IronRuby to developing a whole new application demonstrating the seamless interoperability between IronRuby and .NET. In particular, we'll be using WPF (Windows Presentation Foundation) — the component of the .NET Framework stack used to create rich media and graphical interfaces. Foundations of WPF To reiterate, WPF is the engine in the .NET Framework responsible for rendering rich user interfaces and other media. It's not the only collection of libraries in the framework with the power to do this — Windows Forms does the trick, too — but it is the most powerful and flexible. Put simply, WPF really excels when you need to employ eye candy. It's all about creating impact. Whether you're presenting a document, video, a data entry form, some kind of data visualisation (which I am most hopeful for, especially in terms of IronRuby - more on that later) or chaining all of the above with some flashy animations, you're likely to find that WPF gives you the most power when developing any of these for a Windows target. Let's demonstrate this with an example. I give you what I like to consider the 'hello, world' of WPF applications: the analogue clock. Today, over my lunch break, I created a WPF-based analogue clock using IronRuby... Any normal person would have just looked at their watch. - Twitter The Sample Application: Click here to see this sample in full on GitHub. Using Windows Presentation Foundation from IronRuby to create a Clock class Invoking the Clock class   Gives you The above is by no means perfect (it was a lunch break), but I think it does the job of illustrating IronRuby's interoperability with WPF using a familiar data visualisation. I'm sure you'll want to dissect the code yourself, but allow me to step through the important bits. (By the way, feel free to run this through ir first to see what actually happens). Now we're using IronRuby - unlike my previous post where we took pure Ruby code and ran it through ir, the IronRuby interpreter, to demonstrate compatibility. The main thing of note is the very distinct parallels between .NET namespaces and Ruby modules, .NET classes and Ruby classes. I guess there's not much to say about it other than at this point, you may as well be working with a purely Ruby graphics-drawing library. You're instantiating .NET objects, but you're doing it with the standard Ruby .new method you know from Ruby as Object#new — although, the root object of all your IronRuby objects isn't actually Object, it's System.Object. You're calling methods on these objects (and classes, for example in the call to System.Windows.Controls.Canvas.SetZIndex()) using the underscored, lowercase convention established for the Ruby language. The integration is so seamless. The fact that you're using a dynamic language on top of .NET's CLR is completely abstracted from you, allowing you to just build your software. A Brief Note on Events Events are a big part of developing client applications in .NET as well as under every other environment I can think of. In case you aren't aware, event-driven programming is essentially the practice of telling your code to call a particular method, or other chunk of code (a delegate) when something happens at an unpredictable time. You can never predict when a user is going to click a button, move their mouse or perform any other kind of input, so the advent of the GUI is what necessitated event-driven programming. This is where one of my favourite aspects of the Ruby language, blocks, can really help us. In traditional C#, for instance, you may subscribe to an event (assign a block of code to execute when an event occurs) in one of two ways: by passing a reference to a named method, or by providing an anonymous code block. You'd be right for seeing the parallel here with Ruby's concept of blocks, Procs and lambdas. As demonstrated at the very end of this rather basic script, we are using .NET's System.Timers.Timer to (attempt to) update the clock every second (I know it's probably not the best way of doing this, but for example's sake). Note: Diverting a little from what I said above, the ticking of a clock is very predictable, yet we still use the event our Timer throws to do this updating as one of many ways to perform that task outside of the main thread. You'll see that all that's needed to assign a block of code to be triggered on an event is to provide that block to the method of the name of the event as it is known to the CLR. This drawback to this is that it only allows the delegation of one code block to each event. You may use the add method to subscribe multiple handlers to that event - pushing that to the end of a queue. Like so: def tick puts "tick tock" end timer.elapsed.add method(:tick) timer.elapsed.add proc { puts "tick tock" } tick_handler = lambda { puts "tick tock" } timer.elapsed.add(tick_handler)   The ability to just provide a block of code as an event handler helps IronRuby towards that very important term I keep throwing around; low ceremony. Anonymous methods are, of course, available in other more conventional .NET languages such as C# and VB but, as usual, feel ever so much more elegant and natural in IronRuby. Note: Whether it's a named method or an anonymous chunk o' code, the block you delegate to the handling of an event can take arguments - commonly, a sender object and some args. Another Brief Note on Verbosity Personally, I don't mind verbose chaining of references in my code as long as it doesn't interfere with performance - as evidenced in the example above. While I love clean code, there's a certain feeling of safety that comes with the terse explicitness of long-winded addressing and the describing of objects as opposed to ambiguity (not unlike this sentence). However, when working with IronRuby, even I grow tired of typing System::Whatever::Something. Some people enjoy simply assuming namespaces and forgetting about them, regardless of the language they're using. Don't worry, IronRuby has you covered. It is completely possible to, with a call to include, bring the contents of a .NET-converted module into context of your IronRuby code - just as you would if you wanted to bring in an 'organic' Ruby module. To refactor the style of the above example, I could place the following at the top of my Clock class: class Clock include System::Windows::Shape include System::Windows::Media include System::Windows::Threading # and so on...   And by doing so, reduce calls to System::Windows::Shapes::Ellipse.new to simply Ellipse.new or references to System::Windows::Threading::DispatcherPriority.Render to a friendlier DispatcherPriority.Render. Conclusion I hope by now you can understand better how IronRuby interoperates with .NET and how you can harness the power of the .NET framework with the dynamic nature and elegant idioms of the Ruby language. The manner and parlance of Ruby that makes it a joy to work with sets of data is, of course, present in IronRuby — couple that with WPF's capability to produce great graphics quickly and easily, and I hope you can visualise the possibilities of data visualisation using these two things. Using IronRuby and WPF together to create visual representations of data and infographics is very exciting to me. Although today, with this project, we're only presenting one simple piece of information - the time - the potential is much grander. My day-to-day job is centred around software development and UI design, specifically in the realm of healthcare, and if you were to pay a visit to our office you would behold, directly above my desk, a large plasma TV with a constantly rotating, animated slideshow of charts and infographics to help members of our team do their jobs. It's an app powered by WPF which never fails to spark some conversation with visitors whose gaze has been hooked. If only it was written in IronRuby, the pleasantly low ceremony and reduced pre-processing time for my brain would have helped greatly. Edd Morgan blog Related Links: Getting PhP and Ruby working on Windows Azure and SQL Azure

    Read the article

  • KVM in Ubuntu cannot trap Windows7 keyboard shortcut

    - by lydonchandra
    I am running Windows7 as a guest OS inside KVM running in Ubuntu Desktop 10.04 Everytime I do Alt+Tab within Windows7, the shortcut is caught by Ubuntu. How can I 'trap' the shortcut to stay within the guest OS? I tried running the guest OS fullscreen but Alt+Tab still escapes. Running guest OS fullscreen with display scaled up seems to trap Alt+Tab within KVM, but somehow guest OS is running very very slowly in that mode. Any idea?

    Read the article

  • VMWare Pre-Allocated vs. Growable, which is faster?

    - by tekiegreg
    In an effort to increase speed in my Vmware setup, I was thinking about converting a Windows XP Guest 32 bit I have from growable to pre-allocated, I'm currently running VMWare Workstation 7 with Windows 7 64 bit as the host. Specs: Dual Core CPU, one allocated to guest 4GB of RAM, 2GB to guest HD max capacity is 500GB, 150GB allocated to guest (I have 300GB left and don't mind parting with the space, currently HD is 80GB and converting would obviously add another 70GB of space), HD that guest is running on is separate from Host OS Either that or any other suggestions you have might be appreciated, thanks!

    Read the article

  • Upgrade an Ubuntu 8.04 installation with VMware Server 1.0.8 and lots of guest OSes to Something Els

    - by Glyph
    I have an Ubuntu 8.04 (Hardy Heron) host machine which is running a whole slew of virtual machines in VMWare Server 1.0.8. Among other guest OSes, there is every release version of Ubuntu since 6.06, OpenSolaris 2009.06, and Windows XP. Right now I access these VMs from a variety of client OSes as well; Linux and Windows via the VMWare server console, and MacOS via X-forwarding the host machine's server console. I'd like to upgrade the host to Ubuntu 10.04 (Lucid Lynx), but from what I can tell, getting VMWare Server 1.x to work on a more recent version of Linux is a real pain. While VMware Server 2.x is a bit easier, it's still not packaged as Debian packages, so installing security updates is a big chore. As long as I'm upgrading anyway, I'd like to move to a virtualization solution that will allow me to automate applying updates. The options that I'm aware of right now are KVM (managed via virt-manager) and VirtualBox (as managed by its own tools or via its own libvirt bindings), but I'm open to other suggestions. For each option, I'd like to know how do I convert my guest images to the new format? am I going to have to re-activate my Windows guests (alternatively, "If the virtual hardware is different by default, can I avoid re-activation by changing some virtualization configuration to provide me with more similar virtual hardware") what are the management options like for each client OS (mac, linux, windows)? Thanks.

    Read the article

  • How can I get mouse capture to work in virtualbox when I move guest window to second monitor?

    - by Dan
    I'm running VirtualBox on a Win7 host. Guest OS is Centos. My setup is a laptop (screen 1) with a huge external monitor (screen 2). I'm only telling Centos there is one monitor though. When I start up VirtualBox on screen 1, the mouse capture works fine. I don't have mouse integration because (I think) the kernel on Centos is too old to support it. That's fine, I don't mind doing the Right-Control thing. The problem I have is that when I drag the whole VM window over to my second monitor, the mouse capture doesn't work right anymore. I click inside the VM and can move the VM cursor a little bit, but I can't always get to the edges of the VM screen -- before I get all the way to an edge, the cursor will escape from the VM as if I had hit right-control. But it's still captured according to the icon, and if I then hit right-control, the guest cursor jumps to a different screen location. My workaround: if I have the VM window mostly on screen 2, but a small corner of it still on screen 1, then the mouse capture works correctly. Is there a setting to make this work better?

    Read the article

  • Is there apt-cacher for Windows?

    - by Ted Kim
    I have two computers. C1: Windows with Internet connection. C2: Ubuntu connected with C1 but not connected with Internet. I'd like to access apt repositories to update or install some packages on Ubuntu. I heard, apt-cacher is one of solutions, but I couldn't find apt-cacher for Windows (It is only one, I have, with Internet connection). Please let me know how to do. Thanks in advance Ted Kim

    Read the article

  • VirtualBox 3.2 is released! A Red Letter Day?

    - by Fat Bloke
    Big news today! A new release of VirtualBox packed full of innovation and improvements. Over the next few weeks we'll take a closer look at some of these new features in a lot more depth, but today we'll whet your appetite with the headline descriptions. To start with, we should point out that this is the first Oracle-branded version which makes today a real Red-letter day ;-)  Oracle VM VirtualBox 3.2 Version 3.2 moves VirtualBox forward in 3 main areas ( handily, all beginning with "P" ) : performance, power and supported guest operating system platforms.  Let's take a look: Performance New Latest Intel hardware support - Harnessing the latest in chip-level support for virtualization, VirtualBox 3.2 supports new Intel Core i5 and i7 processor and Intel Xeon processor 5600 Series support for Unrestricted Guest Execution bringing faster boot times for everything from Windows to Solaris guests; New Large Page support - Reducing the size and overhead of key system resources, Large Page support delivers increased performance by enabling faster lookups and shorter table creation times. New In-hypervisor Networking - Significant optimization of the networking subsystem has reduced context switching between guests and host, increasing network throughput by up to 25%. New New Storage I/O subsystem - VirtualBox 3.2 offers a completely re-worked virtual disk subsystem which utilizes asynchronous I/O to achieve high-performance whilst maintaining high data integrity; New Remote Video Acceleration - The unique built-in VirtualBox Remote Display Protocol (VRDP), which is primarily used in virtual desktop infrastructure deployments, has been enhanced to deliver video acceleration. This delivers a rich user experience coupled with reduced computational expense, which is vital when servers are running hundreds of virtual machines; Power New Page Fusion - Traditional Page Sharing techniques have suffered from long and expensive cache construction as pages are scrutinized as candidates for de-duplication. Taking a smarter approach, VirtualBox Page Fusion uses intelligence in the guest virtual machine to determine much more rapidly and accurately those pages which can be eliminated thereby increasing the capacity or vm density of the system; New Memory Ballooning- Ballooning provides another method to increase vm density by allowing the memory of one guest to be recouped and made available to others; New Multiple Virtual Monitors - VirtualBox 3.2 now supports multi-headed virtual machines with up to 8 virtual monitors attached to a guest. Each virtual monitor can be a host window, or be mapped to the hosts physical monitors; New Hot-plug CPU's - Modern operating systems such Windows Server 2008 x64 Data Center Edition or the latest Linux server platforms allow CPUs to be dynamically inserted into a system to provide incremental computing power while the system is running. Version 3.2 introduces support for Hot-plug vCPUs, allowing VirtualBox virtual machines to be given more power, with zero-downtime of the guest; New Virtual SAS Controller - VirtualBox 3.2 now offers a virtual SAS controller, enabling it to run the most demanding of high-end guests; New Online Snapshot Merging - Snapshots are powerful but can eat up disk space and need to be pruned from time to time. Historically, machines have needed to be turned off to delete or merge snapshots but with VirtualBox 3.2 this operation can be done whilst the machines are running. This allows sophisticated system management with minimal interruption of operations; New OVF Enhancements - VirtualBox has supported the OVF standard for virtual machine portability for some time. Now with 3.2, VirtualBox specific configuration data is also stored in the standard allowing richer virtual machine definitions without compromising portability; New Guest Automation - The Guest Automation APIs allow host-based logic to drive operations in the guest; Platforms New USB Keyboard and Mouse - Support more guests that require USB input devices; New Oracle Enterprise Linux 5.5 - Support for the latest version of Oracle's flagship Linux platform; New Ubuntu 10.04 ("Lucid Lynx") - Support for both the desktop and server version of the popular Ubuntu Linux distribution; And as a man once said, "just one more thing" ... New Mac OS X (experimental) - On Apple hardware only, support for creating virtual machines run Mac OS X. All in all this is a pretty powerful release packed full of innovation and speedups. So what are you waiting for?  -FB 

    Read the article

  • hMail server - sending copy of an e-mail changing the sender

    - by Beggycev
    Dear All please help me with following request. I am using hMail server in a company(test.com) and have several hundred of guest e-mail accounts ([email protected]). I need to accomplish this: When any of the guest e-mails receives a message(either from internal or external sender) this e-mail(or its copy) is sent to another address "[email protected]" which is the same for all of these guest e-mails. But I need the sender to be identified as the [email protected] not as the original sender which happens when I use forwarding. I tried to prepare a simple VBS script using the OnAcceptMessage event to accomplish this. and it works on my testing machine without internet connectivity but not in the production environment. To be specific, if I send an e-mail to [email protected] in my test env it is delivered to the [email protected] with [email protected] being a sender. But in the production env the e-mail stays in the guest mailbox with the original sender. I am interested in any solution, using a rule in hMail or script, anything is welcome. Thank you for any help! The script: Sub OnAcceptMessage(oClient, oMessage) 'creating application object in order to perform operations as hMail server administrator Dim obApp Set obApp = CreateObject("hMailServer.Application") Dim adminLogin Dim adminPassword 'Enter actual values for administrator account and password 'CHANGE HERE: adminLogin = "Admin_login" adminPassword = "password" Call obApp.Authenticate(adminLogin, adminPassword) Dim addrStart 'Take first 5 characters of recipients address addrStart = Mid(oMessage.To, 1, 5) 'if the recipient's address start with "guest" if addrStart = "guest" then Dim recipient Dim recipientAddress 'enter name of the recipient and respective e-mail address() 'CHANGE HERE: recipient = "FINAL" recipientAddress = "[email protected]" 'change the sender and sender e-mail address to the guest oMessage.FromAddress = oMessage.To oMessage.From = oMessage.To & "<" & oMessage.To & ">" 'delete recipients and enter a new one - the actual mps and its e-mail from the variables set above oMessage.ClearRecipients() oMessage.AddRecipient recipient, recipientAddress 'save the e-mail oMessage.save end if End Sub

    Read the article

  • How can I configure Samba to share (read/write) any folder with root permissions?

    - by Mike Toews
    I have a CentOS 5 VirtualBox guest on a Win7x64 host. I am attempting to setup a read/write share a directory owned by root with my Windows host using Samba, but I'm having no luck after running around in circles. To simplify matters, I've disabled my Firewall (/etc/init.d/iptables stop). As security and permissions are irrelevant for this purpose, I'd rather not have to set up another unix user/group/password. Here is the output from testparm Load smb config files from /etc/samba/smb.conf rlimit_max: rlimit_max (1024) below minimum Windows limit (16384) Processing section "[Guest Share]" Loaded services file OK. Server role: ROLE_STANDALONE and the source of /etc/samba/smb.conf: [global] workgroup = WRKGRP netbios name = SMBSERVER security = SHARE load printers = No [Guest Share] comment = Guest access share path = /root/src read only = No guest ok = Yes Running /etc/init.d/smb restart shows an OK status. However, on my Windows host, I can only see the share folder on the guest \\IPv4, but I cannot go into "Guest Share": "The network name cannot be found" error message is a common error, with a likely cause: The user you are trying to access the share with does not have sufficient permissions to access the path for the share. Both read (r) and access (x) should be possible. Am I trying to use root as a passwordless Samba guest? I'd like to, is it possible? How can I configure Samba to share (read/write) any folder with root permissions?

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >