Search Results

Search found 609 results on 25 pages for 'kitten 94'.

Page 19/25 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• How to access remote lan machines through a ipsec / xl2ptd vpn (maybe iptables related)

  - by Simon

  I’m trying to do the setup of a IPSEC / XL2TPD VPN for our office, and I’m having some problems accessing the remote local machines after connecting to the VPN. I can connect, and I can browse Internet sites trough the VPN, but as said, I’m unable to connect or even ping the local ones. My Network setup is something like this: INTERNET eth0 ROUTER / VPN eth2 LAN These are some traceroutes behind the VPN: traceroute to google.com (173.194.78.94), 64 hops max, 52 byte packets 1 192.168.1.80 (192.168.1.80) 74.738 ms 71.476 ms 70.123 ms 2 10.35.192.1 (10.35.192.1) 77.832 ms 77.578 ms 77.865 ms 3 10.47.243.137 (10.47.243.137) 78.837 ms 85.409 ms 76.032 ms 4 10.47.242.129 (10.47.242.129) 78.069 ms 80.054 ms 77.778 ms 5 10.254.4.2 (10.254.4.2) 86.174 ms 10.254.4.6 (10.254.4.6) 85.687 ms 10.254.4.2 (10.254.4.2) 85.664 ms traceroute to 192.168.1.3 (192.168.1.3), 64 hops max, 52 byte packets 1 * * * 2 *traceroute: sendto: No route to host traceroute: wrote 192.168.1.3 52 chars, ret=-1 *traceroute: sendto: Host is down traceroute: wrote 192.168.1.3 52 chars, ret=-1 * traceroute: sendto: Host is down 3 traceroute: wrote 192.168.1.3 52 chars, ret=-1 *traceroute: sendto: Host is down traceroute: wrote 192.168.1.3 52 chars, ret=-1 These are my iptables rules: iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT # allow lan to router traffic iptables -A INPUT -s 192.168.1.0/24 -i eth2 -j ACCEPT # ssh iptables -A INPUT -p tcp --dport ssh -j ACCEPT # vpn iptables -A INPUT -p 50 -j ACCEPT iptables -A INPUT -p ah -j ACCEPT iptables -A INPUT -p udp --dport 500 -j ACCEPT iptables -A INPUT -p udp --dport 4500 -j ACCEPT iptables -A INPUT -p udp --dport 1701 -j ACCEPT # dns iptables -A INPUT -s 192.168.1.0/24 -p tcp --dport 53 -j ACCEPT iptables -A INPUT -s 192.168.1.0/24 -p udp --dport 53 -j ACCEPT iptables -t nat -A POSTROUTING -j MASQUERADE # logging iptables -I INPUT 5 -m limit --limit 1/min -j LOG --log-prefix "iptables denied: " --log-level 7 # block all other traffic iptables -A INPUT -j DROP And here are some firewall log lines: Dec 6 11:11:57 router kernel: [8725820.003323] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=192.168.1.3 LEN=60 TOS=0x00 PREC=0x00 TTL=255 ID=62174 PROTO=UDP SPT=61910 DPT=53 LEN=40 Dec 6 11:12:29 router kernel: [8725852.035826] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=15344 PROTO=UDP SPT=56329 DPT=8612 LEN=24 Dec 6 11:12:36 router kernel: [8725859.121606] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=11767 PROTO=UDP SPT=63962 DPT=8612 LEN=24 Dec 6 11:12:44 router kernel: [8725866.203656] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=11679 PROTO=UDP SPT=57101 DPT=8612 LEN=24 Dec 6 11:12:51 router kernel: [8725873.285979] iptables denied: IN=ppp0 OUT= MAC= SRC=192.168.1.81 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=39165 PROTO=UDP SPT=62625 DPT=8612 LEN=24 I’m pretty sure that the problem should be related with iptables, but after trying a lot of different confs, I was unable to find the right one. Any help will be greetly appreciated ;). Kind regards, Simon. EDIT: This is my route table: default 62.43.193.33.st 0.0.0.0 UG 100 0 0 eth0 62.43.193.32 * 255.255.255.224 U 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth2 192.168.1.81 * 255.255.255.255 UH 0 0 0 ppp0

  Read the article

• gallery2 and nginx with rewrite return file not found for file name with space (or + sign in url)

  - by Vangel

  I have setup nginx with gallery2 on an internal server. Everything works fine under apache2 which I checked first, it used to be on apache2 Problem is: gallery2 seems to generate url with + sign in it for file names/ images which had spaces in it so a file like "may report.jpg" becomes "may+report.jpg" The URL rewrite works but gallery2 throws an error for file not found. THis does not happen under apache2. Here is my nginx rewrite rule: location / { index main.php index.html; default_type text/html; # If the file exists as a static file serve it # directly without running all # the other rewite tests on it if (-f $request_filename) { break; } } location /v/ { # if ($request_uri !~ /main.php) # { rewrite ^/v/(.*)$ /main.php?g2_view=core.ShowItem&g2_path=$1 last; # } } location /d/ { if ($request_uri !~ /main.php) { rewrite ^/d/([0-9]+)-([0-9]+)/(.*)$ /main.php?g2_view=core.DownloadItem&g2_itemId=$1&g2_serialNumber=$2&g2_fileName=$3 last; } } location ~ \.php$ { fastcgi_pass 127.0.0.1:8889; fastcgi_index main.php; fastcgi_intercept_errors on; # to support 404s for PHP files not found fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; fastcgi_param SERVER_NAME $host; fastcgi_read_timeout 300; } the sit on its own works fine. only the images with spaces in file name do not display in album view and also when clicking the the image for full page view will throw this error Error (ERROR_MISSING_OBJECT) : Parent 103759 path report+april+456.flv in modules/core/classes/helpers/GalleryFileSystemEntityHelper_simple.class at line 98 (GalleryCoreApi::error) in modules/core/classes/GalleryCoreApi.class at line 1853 (GalleryFileSystemEntityHelper_simple::fetchChildIdByPathComponent) in modules/core/classes/helpers/GalleryFileSystemEntityHelper_simple.class at line 53 (GalleryCoreApi::fetchChildIdByPathComponent) in modules/core/classes/GalleryCoreApi.class at line 1804 (GalleryFileSystemEntityHelper_simple::fetchItemIdByPath) in modules/rewrite/classes/RewriteSimpleHelper.class at line 45 (GalleryCoreApi::fetchItemIdByPath) in ??? at line 0 (RewriteSimpleHelper::loadItemIdFromPath) in modules/rewrite/classes/RewriteUrlGenerator.class at line 103 in modules/rewrite/classes/parsers/modrewrite/ModRewriteUrlGenerator.class at line 37 (RewriteUrlGenerator::_onLoad) in init.inc at line 147 (ModRewriteUrlGenerator::initNavigation) in main.php at line 180 in main.php at line 94 in main.php at line 83 System Information Gallery version 2.2.4 PHP version 5.3.6 fpm-fcgi Webserver nginx/0.8.55 Database mysqli 5.0.95 Toolkits ImageMagick, Thumbnail, Gd Operating system Linux CentOS-55-64-minimal 2.6.18-274.18.1.el5 #1 SMP Thu Feb 9 12:45:44 EST 2012 x86_64 Browser Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.52 Safari/536.5 In the report above there is usable system information if that helps. I know the nginx is old but it comes as default in centos repo and I am not sure if upgrading will fix the problem or break something else it seems gallery2 must map the + to space internally but why it's not doing so with nginx I can't tell. EDIT: I just verified that if I change the '+' sign to %20 then gallery2 works. but gallery2 is generating URL as +. I found a (maybe) related problem here for IIS7 and Gallery2 http://forums.asp.net/t/1431951.aspx EDIT2: Accessing the URL without rewrite and having the + sign works. Must be something to do with rewrite. Here is the relevant apache2 rule that might be of help RewriteCond %{THE_REQUEST} /d/([0-9]+)-([0-9]+)/([^/?]+)(\?.|\ .) RewriteCond %{REQUEST_URI} !/main\.php$ RewriteRule . /main.php?g2_view=core.DownloadItem&g2_itemId=%1&g2_serialNumber=%2&g2_fileName=%3 [QSA,L] RewriteCond %{THE_REQUEST} /v/([^?]+)(\?.|\ .) RewriteCond %{REQUEST_URI} !/main\.php$ RewriteRule . /main.php?g2_path=%1 [QSA,L]

  Read the article

• Iptables blocking mysql port 3306

  - by valmar

  I got a Tomcat server running a web application that must access a mysql server via Hibernate on the same machine. So, I added a rule for port 3306 to my iptables script but tomcat cannot connect to the mysql server for some reason. I need to reset all iptables rules - Then tomcat can connect to the mysql server again. All the other iptables rules work perfectly though. What's wrong? Here is my script: iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp --dport 24 -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A OUTPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp -s localhost --dport 8009 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp -d localhost --dport 8009 -j ACCEPT iptables -A INPUT -p tcp -s localhost --dport 3306 -j ACCEPT iptables -A OUTPUT -p tcp -d localhost --dport 3306 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A OUTPUT -p tcp --dport 443 -j ACCEPT iptables -A INPUT -p tcp --dport 25 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 25 -j ACCEPT iptables -A INPUT -p tcp --dport 587 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 587 -j ACCEPT iptables -A INPUT -p tcp --dport 465 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 465 -j ACCEPT iptables -A INPUT -p tcp --dport 110 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 110 -j ACCEPT iptables -A INPUT -p tcp --dport 995 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 995 -j ACCEPT iptables -A INPUT -p tcp --dport 143 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 143 -j ACCEPT iptables -A INPUT -p tcp --dport 993 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 993 -j ACCEPT iptables -A INPUT -j DROP My /etc/hosts file: # nameserver config # IPv4 127.0.0.1 localhost 46.4.7.93 mydomain.com 46.4.7.93 Ubuntu-1004-lucid-64-minimal 46.4.7.93 horst # IPv6 ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts Having a look into the iptables logs, gives me this: Jun 22 16:52:43 Ubuntu-1004-lucid-64-minimal kernel: [ 435.111780] denied-input IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=127.0.0.1 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=52432 DF PROTO=TCP SPT=56108 DPT=8009 WINDOW=32792 RES=0x00 SYN URGP=0 Jun 22 16:52:46 Ubuntu-1004-lucid-64-minimal kernel: [ 438.110555] denied-input IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=127.0.0.1 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=52433 DF PROTO=TCP SPT=56108 DPT=8009 WINDOW=32792 RES=0x00 SYN URGP=0 Jun 22 16:52:46 Ubuntu-1004-lucid-64-minimal kernel: [ 438.231954] denied-input IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=127.0.0.1 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=48020 DF PROTO=TCP SPT=56109 DPT=8009 WINDOW=32792 RES=0x00 SYN URGP=0 Jun 22 16:52:49 Ubuntu-1004-lucid-64-minimal kernel: [ 441.229778] denied-input IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=127.0.0.1 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=48021 DF PROTO=TCP SPT=56109 DPT=8009 WINDOW=32792 RES=0x00 SYN URGP=0 Jun 22 16:53:57 Ubuntu-1004-lucid-64-minimal kernel: [ 508.731839] denied-input IN=eth0 OUT= MAC=6c:62:6d:85:bf:0e:00:26:88:75:dc:01:08:00 SRC=78.92.97.67 DST=46.4.7.93 LEN=64 TOS=0x00 PREC=0x00 TTL=122 ID=23053 DF PROTO=TCP SPT=1672 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0 Jun 22 16:53:59 Ubuntu-1004-lucid-64-minimal kernel: [ 511.625038] denied-input IN=eth0 OUT= MAC=6c:62:6d:85:bf:0e:00:26:88:75:dc:01:08:00 SRC=78.92.97.67 DST=46.4.7.93 LEN=64 TOS=0x00 PREC=0x00 TTL=122 ID=23547 DF PROTO=TCP SPT=1672 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0 Jun 22 16:54:22 Ubuntu-1004-lucid-64-minimal kernel: [ 533.981995] denied-input IN=eth0 OUT= MAC=6c:62:6d:85:bf:0e:00:26:88:75:dc:01:08:00 SRC=27.254.39.16 DST=46.4.7.93 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=6549 PROTO=TCP SPT=6005 DPT=33796 WINDOW=64240 RES=0x00 ACK SYN URGP=0 Jun 22 16:54:44 Ubuntu-1004-lucid-64-minimal kernel: [ 556.297038] denied-input IN=eth0 OUT= MAC=6c:62:6d:85:bf:0e:00:26:88:75:dc:01:08:00 SRC=94.78.93.41 DST=46.4.7.93 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=7712 PROTO=TCP SPT=57598 DPT=445 WINDOW=512 RES=0x00 SYN URGP=0

  Read the article

• Does ModSecurity 2.7.1 work with ASP.NET MVC 3?

  - by autonomatt

  I'm trying to get ModSecurity 2.7.1 to work with an ASP.NET MVC 3 website. The installation ran without errors and looking at the event log, ModSecurity is starting up successfully. I am using the modsecurity.conf-recommended file to set the basic rules. The problem I'm having is that whenever I am POSTing some form data, it doesn't get through to the controller action (or model binder). I have SecRuleEngine set to DetectionOnly. I have SecRequestBodyAccess set to On. With these settings, the body of the POST never reaches the controller action. If I set SecRequestBodyAccess to Off it works, so it's definitely something to do with how ModSecurity forwards the body data. The ModSecurity debug shows the following (looks to me as if all passed through): Second phase starting (dcfg 94b750). Input filter: Reading request body. Adding request argument (BODY): name "[0].IsSelected", value "on" Adding request argument (BODY): name "[0].Quantity", value "1" Adding request argument (BODY): name "[0].VariantSku", value "047861" Adding request argument (BODY): name "[1].Quantity", value "0" Adding request argument (BODY): name "[1].VariantSku", value "047862" Input filter: Completed receiving request body (length 115). Starting phase REQUEST_BODY. Recipe: Invoking rule 94c620; [file "*********************"] [line "54"] [id "200001"]. Rule 94c620: SecRule "REQBODY_ERROR" "!@eq 0" "phase:2,auditlog,id:200001,t:none,log,deny,status:400,msg:'Failed to parse request body.',logdata:%{reqbody_error_msg},severity:2" Transformation completed in 0 usec. Executing operator "!eq" with param "0" against REQBODY_ERROR. Operator completed in 0 usec. Rule returned 0. Recipe: Invoking rule 5549c38; [file "*********************"] [line "75"] [id "200002"]. Rule 5549c38: SecRule "MULTIPART_STRICT_ERROR" "!@eq 0" "phase:2,auditlog,id:200002,t:none,log,deny,status:44,msg:'Multipart request body failed strict validation: PE %{REQBODY_PROCESSOR_ERROR}, BQ %{MULTIPART_BOUNDARY_QUOTED}, BW %{MULTIPART_BOUNDARY_WHITESPACE}, DB %{MULTIPART_DATA_BEFORE}, DA %{MULTIPART_DATA_AFTER}, HF %{MULTIPART_HEADER_FOLDING}, LF %{MULTIPART_LF_LINE}, SM %{MULTIPART_MISSING_SEMICOLON}, IQ %{MULTIPART_INVALID_QUOTING}, IP %{MULTIPART_INVALID_PART}, IH %{MULTIPART_INVALID_HEADER_FOLDING}, FL %{MULTIPART_FILE_LIMIT_EXCEEDED}'" Transformation completed in 0 usec. Executing operator "!eq" with param "0" against MULTIPART_STRICT_ERROR. Operator completed in 0 usec. Rule returned 0. Recipe: Invoking rule 554bd70; [file "********************"] [line "80"] [id "200003"]. Rule 554bd70: SecRule "MULTIPART_UNMATCHED_BOUNDARY" "!@eq 0" "phase:2,auditlog,id:200003,t:none,log,deny,status:44,msg:'Multipart parser detected a possible unmatched boundary.'" Transformation completed in 0 usec. Executing operator "!eq" with param "0" against MULTIPART_UNMATCHED_BOUNDARY. Operator completed in 0 usec. Rule returned 0. Recipe: Invoking rule 554cbe0; [file "*********************************"] [line "94"] [id "200004"]. Rule 554cbe0: SecRule "TX:/^MSC_/" "!@streq 0" "phase:2,log,auditlog,id:200004,t:none,deny,msg:'ModSecurity internal error flagged: %{MATCHED_VAR_NAME}'" Rule returned 0. Hook insert_filter: Adding input forwarding filter (r 5541fc0). Hook insert_filter: Adding output filter (r 5541fc0). Initialising logging. Starting phase LOGGING. Recording persistent data took 0 microseconds. Audit log: Ignoring a non-relevant request. I can't see anything unusual in Fiddler. I'm using a ViewModel in the parameters of my action. No data is bound if SecRequestBodyAccess is set to On. I'm even logging all the Request.Form.Keys and values via log4net, but not getting any values there either. I'm starting to wonder if ModSecurity actually works with ASP.NET MVC or if there is some conflict with the ModSecurity http Module and the model binder kicking in. Does anyone have any suggestions or can anyone confirm they have ModSecurity working with an ASP.NET MVC website?

  Read the article

• MX records not correctly updated by the Google DNS servers

  - by Mac_Cain13

  We are currently losing some e-mail and we discovered that this is caused by a wrong DNS setting. We used a CNAME for our MX record an thats not allowed. So about 2 weeks ago we changed it to an A-record to fix the problem. It seems all major DNS services (like OpenDNS and ISPs) have synced their records and are returning correct results on our DNS queries. But Googles DNS service (at 8.8.8.8) is still returning the CNAME values and we still some e-mails are not delivered correctly. Query on OpenDNS: ; <<>> DiG 9.7.3-P3 <<>> mx wrep.nl @208.67.222.222 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 51231 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;wrep.nl. IN MX ;; ANSWER SECTION: wrep.nl. 3595 IN MX 10 druif.wrep.nl. ;; Query time: 21 msec ;; SERVER: 208.67.222.222#53(208.67.222.222) ;; WHEN: Fri Nov 25 21:36:58 2011 ;; MSG SIZE rcvd: 47 Query on Google DNS: ; <<>> DiG 9.7.3-P3 <<>> mx wrep.nl @8.8.8.8 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12124 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;wrep.nl. IN MX ;; ANSWER SECTION: wrep.nl. 2372 IN CNAME druif.wrep.nl. ;; AUTHORITY SECTION: wrep.nl. 572 IN SOA ns0.freshdns.nl. hostmaster.twilightinc.nl. 2011112401 14400 3600 604800 3600 ;; Query time: 94 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Fri Nov 25 21:38:10 2011 ;; MSG SIZE rcvd: 117 So is there anyone who can explain why Google is responding with a different (incorrect) result two weeks after the last change? And how can we get Google to update their DNS records correctly? Any help is very appreciated. (Please note that other domains that are managed by the same DNS servers/tools are working fine.)

  Read the article

• Too many Bind query (cache) denied, DNS attack?

  - by Jake

  Once Bind crashed and I did: tail -f /var/log/messages I see a massive number of logs every second. Is this a DNS attack? or is there something wrong? Sometimes I see a domain in logs like this: dOmAin.com (upper and lower). As you see there is only one single domain in the logs with different IPs Oct 10 02:21:26 mail named[20831]: client 74.125.189.18#38921: query (cache) 'ns1.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.144.171#38833: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.17#42428: query (cache) 'ns2.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.146.27#37899: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 193.203.82.66#39263: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 8.0.16.170#59723: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 80.169.197.66#32903: query (cache) 'dOmAin.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 134.58.60.1#47558: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.146.34#47387: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 8.0.16.8#59392: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.19#64395: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 217.72.163.3#42190: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 83.146.21.252#22020: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.146.116#57342: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 193.203.82.66#52020: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 8.0.16.72#64317: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 80.169.197.66#31989: query (cache) 'dOmAin.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.18#47436: query (cache) 'ns2.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.16#44005: query (cache) 'ns1.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 85.132.31.10#50379: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 94.241.128.3#60106: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 85.132.31.10#59118: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 212.95.135.78#27811: query (cache) 'domain.com/A/IN' denied /etc/resolv.conf ; generated by /sbin/dhclient-script nameserver 4.2.2.4 nameserver 8.8.4.4 Bind config: // generated by named-bootconf.pl options { directory "/var/named"; /* * If there is a firewall between you and nameservers you want * to talk to, you might need to uncomment the query-source * directive below. Previous versions of BIND always asked * questions using port 53, but BIND 8.1 uses an unprivileged * port by default. */ // query-source address * port 53; allow-transfer { none; }; allow-recursion { localnets; }; //listen-on-v6 { any; }; notify no; }; // // a caching only nameserver config // controls { inet 127.0.0.1 allow { localhost; } keys { rndckey; }; }; zone "." IN { type hint; file "named.ca"; }; zone "localhost" IN { type master; file "localhost.zone"; allow-update { none; }; }; zone "0.0.127.in-addr.arpa" IN { type master; file "named.local"; allow-update { none; }; };

  Read the article

• /phpTest/zologize/axa.php? Another botnet?

  - by M132

  Starring at the log made me think, what is /phpTest/zologize/axa.php and why are bots looking for it? Previously, I had lots of /HNAP1/ requests. Requesting /HNAP1/ from IPs from log revealed, that all of them were sent by Linksys routers. 3 months later, these requests turned out to be generated by a router worm called TheMoon. But requesting /phpTest/zologize/axa.php from these servers returns a 404 error. How these servers got infected, and how can I protect mine from this? 124.11.224.69 - - [02/Feb/2014:00:37:16 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 140.113.238.121 - - [21/Feb/2014:01:24:32 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 77.121.132.79 - - [22/Feb/2014:00:03:56 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 142.4.201.210 - - [24/Feb/2014:21:54:33 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 212.83.168.39 - - [24/Feb/2014:23:16:00 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 168 "-" "-" 87.117.229.210 - - [26/Feb/2014:06:34:58 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 78.100.82.99 - - [26/Feb/2014:08:25:48 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 198.50.205.219 - - [26/Feb/2014:09:59:11 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 210.60.142.107 - - [27/Feb/2014:00:12:12 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 101.109.4.73 - - [27/Feb/2014:08:50:46 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 61.91.128.158 - - [27/Feb/2014:08:59:15 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 201.188.41.175 - - [27/Feb/2014:11:25:42 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 220.133.137.2 - - [27/Feb/2014:12:12:46 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 203.156.104.88 - - [28/Feb/2014:18:11:49 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 61.19.52.58 - - [28/Feb/2014:22:02:56 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 84.2.92.40 - - [28/Feb/2014:23:04:17 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 404 162 "-" "-" 58.64.205.11 - - [01/Mar/2014:06:08:33 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 113.61.200.151 - - [01/Mar/2014:18:25:25 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 178.33.219.12 - - [03/Mar/2014:14:41:48 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 74.63.220.132 - - [04/Mar/2014:01:16:44 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 187.141.230.106 - - [04/Mar/2014:15:39:26 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 21 "-" "-" 103.22.181.146 - - [09/May/2014:17:16:56 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 502 166 "-" "-" 176.31.200.14 - - [10/May/2014:19:52:24 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 68 "-" "-" 124.120.92.70 - - [12/May/2014:16:19:40 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 68 "-" "-" 219.85.198.142 - - [15/May/2014:19:21:22 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 80.84.53.226 - - [23/May/2014:08:58:25 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 87.213.11.165 - - [25/May/2014:06:20:27 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 122.116.220.106 - - [25/May/2014:07:10:21 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 58.8.128.30 - - [29/May/2014:02:43:49 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 142.4.197.135 - - [29/May/2014:11:36:45 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 178.32.243.65 - - [30/May/2014:01:59:53 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 58.8.164.221 - - [30/May/2014:14:04:16 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 140.127.182.15 - - [01/Jun/2014:14:45:40 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 218.166.43.21 - - [01/Jun/2014:16:07:52 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 178.32.188.140 - - [01/Jun/2014:19:11:46 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 94.23.211.173 - - [05/Jun/2014:00:52:52 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 120.117.105.201 - - [05/Jun/2014:04:39:39 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 187.172.27.146 - - [05/Jun/2014:10:20:22 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-" 203.195.219.91 - - [05/Jun/2014:10:53:42 +0200] "GET /phpTest/zologize/axa.php HTTP/1.1" 200 37 "-" "-"

  Read the article

• got VPN l2l connect between a site & HQ but not traffice using ASA5505 on both ends

  - by vinlata

  Hi, Could anyone see what did I do wrong here? this is one configuration of site1 to HQ on ASA5505, I can get connected but seems like no traffic going (allowed) between them, could it be a NAT issue? any helps would much be appreciated Thanks interface Vlan1 nameif inside security-level 100 ip address 172.30.205.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address pppoe setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! passwd .dIuXDIYzD6RSHz7 encrypted ftp mode passive dns server-group DefaultDNS domain-name errg.net object-group network HQ network-object 172.22.0.0 255.255.0.0 network-object 172.22.0.0 255.255.128.0 network-object 172.22.0.0 255.255.255.128 network-object 172.22.1.0 255.255.255.128 network-object 172.22.1.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_20_cryptomap extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list inside_nat0_outbound extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list policy-nat extended permit ip 172.30.205.0 255.255.255.0 172.22.0.0 255.255.0.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) 172.30.205.0 access-list policy-nat access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username errgadmin password Os98gTdF8BZ0X2Px encrypted privilege 15 http server enable http 64.42.2.224 255.255.255.240 outside http 172.22.0.0 255.255.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 190 match address outside_20_cryptomap crypto map outside_map 190 set pfs crypto map outside_map 190 set peer 66.7.249.109 crypto map outside_map 190 set transform-set ESP-3DES-SHA crypto map outside_map 190 set phase1-mode aggressive crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 190 crypto isakmp ipsec-over-tcp port 10000 tunnel-group 66.7.249.109 type ipsec-l2l tunnel-group 66.7.249.109 ipsec-attributes pre-shared-key * telnet timeout 5 ssh 172.30.205.0 255.255.255.0 inside ssh 172.22.0.0 255.255.0.0 outside ssh 64.42.2.224 255.255.255.240 outside ssh 172.25.0.0 255.255.128.0 outside ssh timeout 5 console timeout 0 management-access inside vpdn group PPPoEx request dialout pppoe vpdn group PPPoEx localname [email protected] vpdn group PPPoEx ppp authentication pap vpdn username [email protected] password ********* dhcpd address 172.30.205.100-172.30.205.131 inside dhcpd dns 172.22.0.133 68.94.156.1 interface inside dhcpd wins 172.22.0.133 interface inside dhcpd domain errg.net interface inside dhcpd enable inside ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! end

  Read the article

• I have a NGINX server configured to work with node.js, but many times a file of 1.03MB of js is not loaded by various browser and various pc

  - by Totty

  I'm using this in a local LAN so it should be quite fast. The nginx server use the node.js server to serve static files, so it must pass throught node.js to download the files, but that is not a problem when I'm not using the nginx. In chrome with debugger on I can see that the status is: 206 - partial content and it only has downloaded 31KB of 1.03MB. After 1.1 min it turns red and the status failed. Waiting time: 6ms Receiving: 1.1 min The headers in google chrom: Request URL:http://192.168.1.16/production/assembly/script/production.js Request Method:GET Status Code:206 Partial Content Request Headersview source Accept:*/* Accept-Charset:ISO-8859-1,utf-8;q=0.7,*;q=0.3 Accept-Encoding:gzip,deflate,sdch Accept-Language:pt-PT,pt;q=0.8,en-US;q=0.6,en;q=0.4 Connection:keep-alive Cookie:connect.sid=s%3Abls2qobcCaJ%2FyBNZwedtDR9N.0vD4Fi03H1bEdCszGsxIjjK0lZIjJhLnToWKFVxZOiE Host:192.168.1.16 If-Range:"1081715-1350053827000" Range:bytes=16090-16090 Referer:http://192.168.1.16/production/assembly/ User-Agent:Mozilla/5.0 (Windows NT 6.0) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Response Headersview source Accept-Ranges:bytes Cache-Control:public, max-age=0 Connection:keep-alive Content-Length:1 Content-Range:bytes 16090-16090/1081715 Content-Type:application/javascript Date:Mon, 15 Oct 2012 09:18:50 GMT ETag:"1081715-1350053827000" Last-Modified:Fri, 12 Oct 2012 14:57:07 GMT Server:nginx/1.1.19 X-Powered-By:Express My nginx configurations: File 1: user totty; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /home/totty/web/production01_server/node_modules/production/_logs/_NGINX_access.txt; error_log /home/totty/web/production01_server/node_modules/production/_logs/_NGINX_error.txt; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## autoindex on; include /home/totty/web/production01_server/_deployment/nginxConfigs/server/*; } File that is included by the previous file: server { # custom location for entry # using only "/" instead of "/production/assembly" it # would allow you to go to "thatip/". In this way # we are limiting to "thatip/production/assembly/" location /production/assembly/ { # ip and port used in node.js proxy_pass http://127.0.0.1:3000/; } location /production/assembly.mongo/ { proxy_pass http://127.0.0.1:9000/; proxy_redirect off; } location /production/assembly.logs/ { autoindex on; alias /home/totty/web/production01_server/node_modules/production/_logs/; } }

  Read the article

• Mysqld not starting due to apparent db corruption

  - by pitosalas

  I am very new at admining mysql, and bad for me, something caused the db to get clobbered. There are many error messages in the log that I am not sure how to safely proceed. Can you give some tips? Here's the log: 110107 15:07:15 mysqld started 110107 15:07:15 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 110107 15:07:15 InnoDB: Starting log scan based on checkpoint at InnoDB: log sequence number 35 515914826. InnoDB: Doing recovery: scanned up to log sequence number 35 515915839 InnoDB: 1 transaction(s) which must be rolled back or cleaned up InnoDB: in total 1 row operations to undo InnoDB: Trx id counter is 0 1697553664 110107 15:07:15 InnoDB: Starting an apply batch of log records to the database... InnoDB: Progress in percents: 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 InnoDB: Apply batch completed InnoDB: Starting rollback of uncommitted transactions InnoDB: Rolling back trx with id 0 1697553198, 1 rows to undoInnoDB: Error: trying to access page number 3522914176 in space 0, InnoDB: space name ./ibdata1, InnoDB: which is outside the tablespace bounds. InnoDB: Byte offset 0, len 16384, i/o type 10 110107 15:07:15InnoDB: Assertion failure in thread 3086403264 in file fil0fil.c line 3922 InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/mysql/en/Forcing_recovery.html InnoDB: about forcing recovery. mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=0 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 217599 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffc55ac, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x8139eec 0x83721d5 0x833d897 0x833db71 0x832aa38 0x835f025 0x835f7a3 0x830a77e 0x8326b57 0x831c825 0x8317b8d 0x82a9e66 0x8315732 0x834fc9a 0x828d7c3 0x81c29dd 0x81b5620 0x813d9fe 0x40fdf3 0x80d5ff1 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://dev.mysql.com/doc/mysql/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. 110107 15:07:15 mysqld ended

  Read the article

• How broken is routing strategy that causes a martian packet (so far only) during tracepath?

  - by lkraav

  I believe I've achieved a table that routes packets from and to eth1/192.168.3.x through 192.168.3.1, and packets from and to eth0/192.168.1.x through 192.168.1.1 (helpful source). Question: when doing tracepath from 192.168.3.20 (from within vserver), I'm getting kernel: [318535.927489] martian source 192.168.3.20 from 212.47.223.33, on dev eth0 at or near the target IP, while intermediary hops go without (log below). I don't understand why this packet is arriving on eth0, instead of eth1, even after reading this: Note that you may see packets from non-routable IP addresses when running the traceroute or tracepath commands. While packets cannot be routed to these routers, packets sent between 2 routers only need to know the address of the next hop within the local networks, which could be a non-routable address. Can someone explain that paragraph in human language? Based on short initial trials so far, everything else seems to work without causing martians. Is this contained to the nature of tracepath operation or do I have some other bigger routing problem that will cause work traffic breakage? Side note: is it possible to inspect martian packet with tcpdump or wireshark or anything of the sort? I'm have not been able to get it to show up on my own. vserver-20 / # tracepath -n 212.47.223.33 1: 192.168.3.2 0.064ms pmtu 1500 1: 192.168.3.1 1.076ms 1: 192.168.3.1 1.259ms 2: 90.191.8.2 1.908ms 3: 90.190.134.194 2.595ms 4: 194.126.123.94 2.136ms asymm 5 5: 195.250.170.22 2.266ms asymm 6 6: 212.47.201.86 2.390ms asymm 7 7: no reply 8: no reply 9: no reply ^C Host routing: $ sudo ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: sit0: <NOARP> mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0 3: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:24:1d:de:b3:5d brd ff:ff:ff:ff:ff:ff inet 192.168.1.2/24 scope global eth0 4: eth1: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:46:46:a3:6a brd ff:ff:ff:ff:ff:ff inet 192.168.3.2/27 scope global eth1 inet 192.168.3.20/27 brd 192.168.3.31 scope global secondary eth1 # linux-vserver instance $ sudo ip route default via 192.168.1.1 dev eth0 metric 3 unreachable 127.0.0.0/8 scope host 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.2 192.168.3.0/27 dev eth1 proto kernel scope link src 192.168.3.2 $ sudo ip rule 0: from all lookup local 32764: from all to 192.168.3.0/27 lookup dmz 32765: from 192.168.3.0/27 lookup dmz 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table dmz default via 192.168.3.1 dev eth1 metric 4 192.168.3.0/27 dev eth1 scope link metric 4 Gateway routing # ip route 10.24.0.2 dev tun0 proto kernel scope link src 10.24.0.1 10.24.0.0/24 via 10.24.0.2 dev tun0 192.168.3.0/24 dev br-dmz proto kernel scope link src 192.168.3.1 192.168.1.0/24 dev br-lan proto kernel scope link src 192.168.1.1 $ISP_NET/23 dev eth0.1 proto kernel scope link src $WAN_IP default via $ISP_GW dev eth0.1 Additional background Options for non-virtualized network interface isolation?

  Read the article

• PPTP connection disconnect

  - by Vladimir Franciz S. Blando

  My pptp connection wont stay connected, it will disconnect in less than a minute here are some relevant log entries May 31 13:32:31 localhost NetworkManager[931]: <info> Starting VPN service 'pptp'... May 31 13:32:31 localhost NetworkManager[931]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 15216 May 31 13:32:31 localhost NetworkManager[931]: <info> VPN service 'pptp' appeared; activating connections May 31 13:32:31 localhost NetworkManager[931]: <info> VPN plugin state changed: init (1) May 31 13:32:31 localhost NetworkManager[931]: <info> VPN plugin state changed: starting (3) May 31 13:32:31 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (Connect) reply received. May 31 13:32:31 localhost pppd[15221]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. May 31 13:32:31 localhost pppd[15221]: pppd 2.4.5 started by root, uid 0 May 31 13:32:31 localhost pptp[15224]: nm-pptp-service-15216 log[main:pptp.c:314]: The synchronous pptp option is NOT activated May 31 13:32:31 localhost pppd[15221]: Using interface ppp0 May 31 13:32:31 localhost pppd[15221]: Connect: ppp0 <--> /dev/pts/5 May 31 13:32:31 localhost NetworkManager[931]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) May 31 13:32:31 localhost NetworkManager[931]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established. May 31 13:32:33 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' May 31 13:32:34 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. May 31 13:32:34 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 1536). May 31 13:32:37 localhost pppd[15221]: CHAP authentication succeeded May 31 13:32:37 localhost kernel: [54007.078553] PPP MPPE Compression module registered May 31 13:32:40 localhost pppd[15221]: MPPE 128-bit stateless compression enabled May 31 13:32:42 localhost pppd[15221]: local IP address 10.100.0.52 May 31 13:32:42 localhost pppd[15221]: remote IP address 10.100.0.1 May 31 13:32:42 localhost pppd[15221]: primary DNS address 4.2.2.1 May 31 13:32:42 localhost pppd[15221]: secondary DNS address 255.255.255.255 May 31 13:32:42 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (IP Config Get) reply received. May 31 13:32:42 localhost NetworkManager[931]: <info> VPN Gateway: 103.28.219.2 May 31 13:32:42 localhost NetworkManager[931]: <info> Tunnel Device: ppp0 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Address: 10.100.0.52 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Prefix: 32 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Point-to-Point Address: 10.100.0.1 May 31 13:32:42 localhost NetworkManager[931]: <info> Maximum Segment Size (MSS): 0 May 31 13:32:42 localhost NetworkManager[931]: <info> Forbid Default Route: no May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 DNS: 4.2.2.1 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 DNS: 255.255.255.255 May 31 13:32:42 localhost NetworkManager[931]: <info> DNS Domain: '(none)' May 31 13:32:43 localhost dnsmasq[2127]: exiting on receipt of SIGTERM May 31 13:32:43 localhost NetworkManager[931]: <info> DNS: starting dnsmasq... May 31 13:32:43 localhost NetworkManager[931]: <info> (ppp0): writing resolv.conf to /sbin/resolvconf May 31 13:32:43 localhost dnsmasq[15290]: error at line 2 of /var/run/nm-dns-dnsmasq.conf May 31 13:32:43 localhost dnsmasq[15290]: FAILED to start up May 31 13:32:43 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (IP Config Get) complete. May 31 13:32:43 localhost NetworkManager[931]: <info> Policy set 'Dynalabs' (ppp0) as default for IPv4 routing and DNS. May 31 13:32:43 localhost NetworkManager[931]: <info> VPN plugin state changed: started (4) May 31 13:32:43 localhost NetworkManager[931]: <warn> dnsmasq exited with error: Configuration problem (1) May 31 13:32:43 localhost NetworkManager[931]: <info> (ppp0): writing resolv.conf to /sbin/resolvconf May 31 13:32:43 localhost dbus[872]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) May 31 13:32:43 localhost dbus[872]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' May 31 13:33:00 localhost ntpdate[15370]: step time server 91.189.94.4 offset -1.110301 sec May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd6d6 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x93aa May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xcc83 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2031 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x13d4 May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x5b11 May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x414b May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2f5f May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe9ff May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8e20 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8f0 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf166 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x36e6 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xdd19 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xda26 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xac5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x53a5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x507e May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x1dc5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf87b May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2f27 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd10c May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x66ef May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xa294 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xb15 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x52a2 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd863 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8a96 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xde19 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x9763 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xb23 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x83ca May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x964e May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe8ae May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf614 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x9b1 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf086 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xbff4 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x66c5 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe42 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf295 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x86fe May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x3bc1 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xbaad May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x88b5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd7a May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x30d5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2d8f May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x3933 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8d42 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x4b4 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xa205 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x7cc5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x1b6a May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf004 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x21b6 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x51eb

  Read the article

• Updating a SharePoint master page via a solution (WSP)

  - by Kelly Jones

  In my last blog post, I wrote how to deploy a SharePoint theme using Features and a solution package.  As promised in that post, here is how to update an already deployed master page. There are several ways to update a master page in SharePoint.  You could upload a new version to the master page gallery, or you could upload a new master page to the gallery, and then set the site to use this new page.  Manually uploading your master page to the master page gallery might be the best option, depending on your environment.  For my client, I did these steps in code, which is what they preferred. (Image courtesy of: http://www.joiningdots.net/blog/2007/08/sharepoint-and-quick-launch.html ) Before you decide which method you need to use, take a look at your existing pages.  Are they using the SharePoint dynamic token or the static token for the master page reference?  The wha, huh? SO, there are four ways to tell an .aspx page hosted in SharePoint which master page it should use: “~masterurl/default.master” – tells the page to use the default.master property of the site “~masterurl/custom.master” – tells the page to use the custom.master property of the site “~site/default.master” – tells the page to use the file named “default.master” in the site’s master page gallery “~sitecollection/default.master” – tells the page to use the file named “default.master” in the site collection’s master page gallery For more information about these tokens, take a look at this article on MSDN. Once you determine which token your existing pages are pointed to, then you know which file you need to update.  So, if the ~masterurl tokens are used, then you upload a new master page, either replacing the existing one or adding another one to the gallery.  If you’ve uploaded a new file with a new name, you’ll just need to set it as the master page either through the UI (MOSS only) or through code (MOSS or WSS Feature receiver code – or using SharePoint Designer). If the ~site or ~sitecollection tokens were used, then you’re limited to either replacing the existing master page, or editing all of your existing pages to point to another master page.  In most cases, it probably makes sense to just replace the master page. For my project, I’m working with WSS and the existing pages are set to the ~sitecollection token.  Based on this, I decided to just upload a new version of the existing master page (and not modify the dozens of existing pages). Also, since my client prefers Features and solutions, I created a master page Feature and a corresponding Feature Receiver.  For information on creating the elements and feature files, check out this post: http://sharepointmagazine.net/technical/development/deploying-the-master-page . This works fine, unless you are overwriting an existing master page, which was my case.  You’ll run into errors because the master page file needs to be checked out, replaced, and then checked in.  I wrote code in my Feature Activated event handler to accomplish these steps. Here are the steps necessary in code: Get the file name from the elements file of the Feature Check out the file from the master page gallery Upload the file to the master page gallery Check in the file to the master page gallery Here’s the code in my Feature Receiver: 1: public override void FeatureActivated(SPFeatureReceiverProperties properties) 2: { 3: try 4: { 5:   6: SPElementDefinitionCollection col = properties.Definition.GetElementDefinitions(System.Globalization.CultureInfo.CurrentCulture); 7:   8: using (SPWeb curweb = GetCurWeb(properties)) 9: { 10: foreach (SPElementDefinition ele in col) 11: { 12: if (string.Compare(ele.ElementType, "Module", true) == 0) 13: { 14: // <Module Name="DefaultMasterPage" List="116" Url="_catalogs/masterpage" RootWebOnly="FALSE"> 15: // <File Url="myMaster.master" Type="GhostableInLibrary" IgnoreIfAlreadyExists="TRUE" 16: // Path="MasterPages/myMaster.master" /> 17: // </Module> 18: string Url = ele.XmlDefinition.Attributes["Url"].Value; 19: foreach (System.Xml.XmlNode file in ele.XmlDefinition.ChildNodes) 20: { 21: string Url2 = file.Attributes["Url"].Value; 22: string Path = file.Attributes["Path"].Value; 23: string fileType = file.Attributes["Type"].Value; 24:   25: if (string.Compare(fileType, "GhostableInLibrary", true) == 0) 26: { 27: //Check out file in document library 28: SPFile existingFile = curweb.GetFile(Url + "/" + Url2); 29:   30: if (existingFile != null) 31: { 32: if (existingFile.CheckOutStatus != SPFile.SPCheckOutStatus.None) 33: { 34: throw new Exception("The master page file is already checked out. Please make sure the master page file is checked in, before activating this feature."); 35: } 36: else 37: { 38: existingFile.CheckOut(); 39: existingFile.Update(); 40: } 41: } 42:   43: //Upload file to document library 44: string filePath = System.IO.Path.Combine(properties.Definition.RootDirectory, Path); 45: string fileName = System.IO.Path.GetFileName(filePath); 46: char slash = Convert.ToChar("/"); 47: string[] folders = existingFile.ParentFolder.Url.Split(slash); 48:   49: if (folders.Length > 2) 50: { 51: Logger.logMessage("More than two folders were detected in the library path for the master page. Only two are supported.", 52: Logger.LogEntryType.Information); //custom logging component 53: } 54:   55: SPFolder myLibrary = curweb.Folders[folders[0]].SubFolders[folders[1]]; 56:   57: FileStream fs = File.OpenRead(filePath); 58:   59: SPFile newFile = myLibrary.Files.Add(fileName, fs, true); 60:   61: myLibrary.Update(); 62: newFile.CheckIn("Updated by Feature", SPCheckinType.MajorCheckIn); 63: newFile.Update(); 64: } 65: } 66: } 67: } 68: } 69: } 70: catch (Exception ex) 71: { 72: string msg = "Error occurred during feature activation"; 73: Logger.logException(ex, msg, ""); 74: } 75:   76: } 77:   78: /// <summary> 79: /// Using a Feature's properties, get a reference to the Current Web 80: /// </summary> 81: /// <param name="properties"></param> 82: public SPWeb GetCurWeb(SPFeatureReceiverProperties properties) 83: { 84: SPWeb curweb; 85:   86: //Check if the parent of the web is a site or a web 87: if (properties != null && properties.Feature.Parent.GetType().ToString() == "Microsoft.SharePoint.SPWeb") 88: { 89:   90: //Get web from parent 91: curweb = (SPWeb)properties.Feature.Parent; 92: 93: } 94: else 95: { 96: //Get web from Site 97: using (SPSite cursite = (SPSite)properties.Feature.Parent) 98: { 99: curweb = (SPWeb)cursite.OpenWeb(); 100: } 101: } 102:   103: return curweb; 104: } This did the trick.  It allowed me to update my existing master page, through an easily repeatable process (which is great when you are working with more than one environment and what to do things like TEST it!).  I did run into what I would classify as a strange issue with one of my subsites, but that’s the topic for another blog post.

  Read the article

• SQL SERVER – SSMS: Disk Usage Report

  - by Pinal Dave

  Let us start with humor!  I think we the series on various reports, we come to a logical point. We covered all the reports at server level. This means the reports we saw were targeted towards activities that are related to instance level operations. These are mostly like how a doctor diagnoses a patient. At this point I am reminded of a dialog which I read somewhere: Patient: Doc, It hurts when I touch my head. Doc: Ok, go on. What else have you experienced? Patient: It hurts even when I touch my eye, it hurts when I touch my arms, it even hurts when I touch my feet, etc. Doc: Hmmm … Patient: I feel it hurts when I touch anywhere in my body. Doc: Ahh … now I get it. You need a plaster to your finger John. Sometimes the server level gives an indicator to what is happening in the system, but we need to get to the root cause for a specific database. So, this is the first blog in series where we would start discussing about database level reports. To launch database level reports, expand selected server in Object Explorer, expand the Databases folder, and then right-click any database for which we want to look at reports. From the menu, select Reports, then Standard Reports, and then any of database level reports. In this blog, we would talk about four “disk” reports because they are similar: Disk Usage Disk Usage by Top Tables Disk Usage by Table Disk Usage by Partition Disk Usage This report shows multiple information about the database. Let us discuss them one by one.  We have divided the output into 5 different sections. Section 1 shows the high level summary of the database. It shows the space used by database files (mdf and ldf). Under the hood, the report uses, various DMVs and DBCC Commands, it is using sys.data_spaces and DBCC SHOWFILESTATS. Section 2 and 3 are pie charts. One for data file allocation and another for the transaction log file. Pie chart for “Data Files Space Usage (%)” shows space consumed data, indexes, allocated to the SQL Server database, and unallocated space which is allocated to the SQL Server database but not yet filled with anything. “Transaction Log Space Usage (%)” used DBCC SQLPERF (LOGSPACE) and shows how much empty space we have in the physical transaction log file. Section 4 shows the data from Default Trace and looks at Event IDs 92, 93, 94, 95 which are for “Data File Auto Grow”, “Log File Auto Grow”, “Data File Auto Shrink” and “Log File Auto Shrink” respectively. Here is an expanded view for that section. If default trace is not enabled, then this section would be replaced by the message “Trace Log is disabled” as highlighted below. Section 5 of the report uses DBCC SHOWFILESTATS to get information. Here is the enhanced version of that section. This shows the physical layout of the file. In case you have In-Memory Objects in the database (from SQL Server 2014), then report would show information about those as well. Here is the screenshot taken for a different database, which has In-Memory table. I have highlighted new things which are only shown for in-memory database. The new sections which are highlighted above are using sys.dm_db_xtp_checkpoint_files, sys.database_files and sys.data_spaces. The new type for in-memory OLTP is ‘FX’ in sys.data_space. The next set of reports is targeted to get information about a table and its storage. These reports can answer questions like: Which is the biggest table in the database? How many rows we have in table? Is there any table which has a lot of reserved space but its unused? Which partition of the table is having more data? Disk Usage by Top Tables This report provides detailed data on the utilization of disk space by top 1000 tables within the Database. The report does not provide data for memory optimized tables. Disk Usage by Table This report is same as earlier report with few difference. First Report shows only 1000 rows First Report does order by values in DMV sys.dm_db_partition_stats whereas second one does it based on name of the table. Both of the reports have interactive sort facility. We can click on any column header and change the sorting order of data. Disk Usage by Partition This report shows the distribution of the data in table based on partition in the table. This is so similar to previous output with the partition details now. Here is the query taken from profiler. SELECT row_number() OVER (ORDER BY a1.used_page_count DESC, a1.index_id) AS row_number ,      (dense_rank() OVER (ORDER BY a5.name, a2.name))%2 AS l1 ,      a1.OBJECT_ID ,      a5.name AS [schema] ,       a2.name ,       a1.index_id ,       a3.name AS index_name ,       a3.type_desc ,       a1.partition_number ,       a1.used_page_count * 8 AS total_used_pages ,       a1.reserved_page_count * 8 AS total_reserved_pages ,       a1.row_count FROM sys.dm_db_partition_stats a1 INNER JOIN sys.all_objects a2  ON ( a1.OBJECT_ID = a2.OBJECT_ID) AND a1.OBJECT_ID NOT IN (SELECT OBJECT_ID FROM sys.tables WHERE is_memory_optimized = 1) INNER JOIN sys.schemas a5 ON (a5.schema_id = a2.schema_id) LEFT OUTER JOIN  sys.indexes a3  ON ( (a1.OBJECT_ID = a3.OBJECT_ID) AND (a1.index_id = a3.index_id) ) WHERE (SELECT MAX(DISTINCT partition_number) FROM sys.dm_db_partition_stats a4 WHERE (a4.OBJECT_ID = a1.OBJECT_ID)) >= 1 AND a2.TYPE <> N'S' AND  a2.TYPE <> N'IT' ORDER BY a5.name ASC, a2.name ASC, a1.index_id, a1.used_page_count DESC, a1.partition_number Using all of the above reports, you should be able to get the usage of database files and also space used by tables. I think this is too much disk information for a single blog and I hope you have used them in the past to get data. Do let me know if you found anything interesting using these reports in your environments. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

  Read the article

• How to solve exception_priv _instruction exception while running destop project? [on hold]

  - by Haritha

  While running desktop project im getting exception_priv _instruction how to solve this??? while running this page is coming # # A fatal error has been detected by the Java Runtime Environment: # # EXCEPTION_PRIV_INSTRUCTION (0xc0000096) at pc=0x02f5a92b, pid=3012, tid=3104 # # JRE version: 7.0-b147 # Java VM: Java HotSpot(TM) Client VM (21.0-b17 mixed mode, sharing windows-x86 ) # Problematic frame: # C 0x02f5a92b # # Failed to write core dump. Minidumps are not enabled by default on client versions of Windows # # If you would like to submit a bug report, please visit: # http://bugreport.sun.com/bugreport/crash.jsp # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x02f5a800): JavaThread "LWJGL Application" [_thread_in_native, id=3104, stack(0x076f0000,0x07740000)] siginfo: ExceptionCode=0xc0000096 Registers: EAX=0x000df4f0, EBX=0x32afc180, ECX=0x000df4f0, EDX=0x00000020 ESP=0x0773f768, EBP=0x0773f790, ESI=0x32afc180, EDI=0x02f5a800 EIP=0x02f5a92b, EFLAGS=0x00010206 Top of Stack: (sp=0x0773f768) 0x0773f768: 02bd429c 02bd429c 0773f770 32afc180 0x0773f778: 0773f7b8 32b022c8 00000000 32afc180 0x0773f788: 00000000 0773f7a0 0773f7dc 00943187 0x0773f798: 229ec1c0 00948839 69081736 00000000 0x0773f7a8: 089b0048 00000000 00000014 00001406 0x0773f7b8: 00000002 0773f7bc 32afbeb0 0773f7f8 0x0773f7c8: 32b022c8 00000000 32afbf00 0773f7a0 0x0773f7d8: 0773f7f0 0773f81c 00943187 69081736 Instructions: (pc=0x02f5a92b) 0x02f5a90b: 00 43 00 00 00 00 f0 bc 02 e8 00 e9 22 40 f7 73 0x02f5a91b: 07 85 a5 94 00 90 f7 73 07 50 cc a0 6d d8 49 c0 0x02f5a92b: 6d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x02f5a93b: 00 00 00 00 00 00 00 00 00 08 80 3d 37 00 00 00 Register to memory mapping: EAX=0x000df4f0 is an unknown value EBX=0x32afc180 is an oop {method} - klass: {other class} ECX=0x000df4f0 is an unknown value EDX=0x00000020 is an unknown value ESP=0x0773f768 is pointing into the stack for thread: 0x02f5a800 EBP=0x0773f790 is pointing into the stack for thread: 0x02f5a800 ESI=0x32afc180 is an oop {method} - klass: {other class} EDI=0x02f5a800 is a thread Stack: [0x076f0000,0x07740000], sp=0x0773f768, free space=317k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C 0x02f5a92b j org.lwjgl.opengl.GL11.glVertexPointer(IILjava/nio/FloatBuffer;)V+48 j com.badlogic.gdx.backends.lwjgl.LwjglGL10.glVertexPointer(IIILjava/nio/Buffer;)V+53 j com.badlogic.gdx.graphics.glutils.VertexArray.bind()V+149 j com.badlogic.gdx.graphics.Mesh.bind()V+25 j com.badlogic.gdx.graphics.Mesh.render(IIIZ)V+32 j com.badlogic.gdx.graphics.Mesh.render(III)V+8 j com.badlogic.gdx.graphics.g2d.SpriteBatch.flush()V+197 j com.badlogic.gdx.graphics.g2d.SpriteBatch.switchTexture(Lcom/badlogic/gdx/graphics/Texture;)V+1 j com.badlogic.gdx.graphics.g2d.SpriteBatch.draw(Lcom/badlogic/gdx/graphics/Texture;FFFF)V+33 j sevenseas.game.WorldRenderer.drawBob()V+54 j sevenseas.game.WorldRenderer.render()V+12 j sevenseas.game.GameClass.render(F)V+38 j com.badlogic.gdx.Game.render()V+19 j com.badlogic.gdx.backends.lwjgl.LwjglApplication.mainLoop()V+642 j com.badlogic.gdx.backends.lwjgl.LwjglApplication$1.run()V+27 v ~StubRoutines::call_stub V [jvm.dll+0x122c7e] V [jvm.dll+0x1c9c0e] V [jvm.dll+0x122e73] V [jvm.dll+0x122ed7] V [jvm.dll+0xccd1f] V [jvm.dll+0x14433f] V [jvm.dll+0x171549] C [msvcr100.dll+0x5c6de] endthreadex+0x3a C [msvcr100.dll+0x5c788] endthreadex+0xe4 C [kernel32.dll+0xb713] GetModuleFileNameA+0x1b4 Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j org.lwjgl.opengl.GL11.nglVertexPointer(IIIJJ)V+0 j org.lwjgl.opengl.GL11.glVertexPointer(IILjava/nio/FloatBuffer;)V+48 j com.badlogic.gdx.backends.lwjgl.LwjglGL10.glVertexPointer(IIILjava/nio/Buffer;)V+53 j com.badlogic.gdx.graphics.glutils.VertexArray.bind()V+149 j com.badlogic.gdx.graphics.Mesh.bind()V+25 j com.badlogic.gdx.graphics.Mesh.render(IIIZ)V+32 j com.badlogic.gdx.graphics.Mesh.render(III)V+8 j com.badlogic.gdx.graphics.g2d.SpriteBatch.flush()V+197 j com.badlogic.gdx.graphics.g2d.SpriteBatch.switchTexture(Lcom/badlogic/gdx/graphics/Texture;)V+1 j com.badlogic.gdx.graphics.g2d.SpriteBatch.draw(Lcom/badlogic/gdx/graphics/Texture;FFFF)V+33 j sevenseas.game.WorldRenderer.drawBob()V+54 j sevenseas.game.WorldRenderer.render()V+12 j sevenseas.game.GameClass.render(F)V+38 j com.badlogic.gdx.Game.render()V+19 j com.badlogic.gdx.backends.lwjgl.LwjglApplication.mainLoop()V+642 j com.badlogic.gdx.backends.lwjgl.LwjglApplication$1.run()V+27 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( => current thread ) 0x003d6c00 JavaThread "DestroyJavaVM" [_thread_blocked, id=3240, stack(0x008c0000,0x00910000)] =>0x02f5a800 JavaThread "LWJGL Application" [_thread_in_native, id=3104, stack(0x076f0000,0x07740000)] 0x02bcf000 JavaThread "Service Thread" daemon [_thread_blocked, id=2612, stack(0x02e00000,0x02e50000)] 0x02bc1000 JavaThread "C1 CompilerThread0" daemon [_thread_blocked, id=2776, stack(0x02db0000,0x02e00000)] 0x02bbf400 JavaThread "Attach Listener" daemon [_thread_blocked, id=2448, stack(0x02d60000,0x02db0000)] 0x02bbe000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1764, stack(0x02d10000,0x02d60000)] 0x02bb8000 JavaThread "Finalizer" daemon [_thread_blocked, id=3864, stack(0x02cc0000,0x02d10000)] 0x02bb3400 JavaThread "Reference Handler" daemon [_thread_blocked, id=2424, stack(0x02c70000,0x02cc0000)] Other Threads: 0x02bb1800 VMThread [stack: 0x02c20000,0x02c70000] [id=3076] 0x02bd1000 WatcherThread [stack: 0x02e50000,0x02ea0000] [id=3276] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 4928K, used 2571K [0x229c0000, 0x22f10000, 0x27f10000) eden space 4416K, 46% used [0x229c0000, 0x22bc2e38, 0x22e10000) from space 512K, 100% used [0x22e90000, 0x22f10000, 0x22f10000) to space 512K, 0% used [0x22e10000, 0x22e10000, 0x22e90000) tenured generation total 10944K, used 634K [0x27f10000, 0x289c0000, 0x329c0000) the space 10944K, 5% used [0x27f10000, 0x27faea60, 0x27faec00, 0x289c0000) compacting perm gen total 12288K, used 1655K [0x329c0000, 0x335c0000, 0x369c0000) the space 12288K, 13% used [0x329c0000, 0x32b5dc58, 0x32b5de00, 0x335c0000) ro space 10240K, 42% used [0x369c0000, 0x36dfc660, 0x36dfc800, 0x373c0000) rw space 12288K, 53% used [0x373c0000, 0x37a38180, 0x37a38200, 0x37fc0000) Code Cache [0x00940000, 0x009d8000, 0x02940000) total_blobs=305 nmethods=80 adapters=158 free_code_cache=32183Kb largest_free_block=32955904 Dynamic libraries: 0x00400000 - 0x0042f000 C:\Program Files\Java\jre7\bin\javaw.exe 0x7c900000 - 0x7c9af000 C:\WINDOWS\system32\ntdll.dll 0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll 0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll 0x77e70000 - 0x77f02000 C:\WINDOWS\system32\RPCRT4.dll 0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll 0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll 0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll 0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\COMCTL32.dll 0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll 0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll 0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL 0x629c0000 - 0x629c9000 C:\WINDOWS\system32\LPK.DLL 0x74d90000 - 0x74dfb000 C:\WINDOWS\system32\USP10.dll 0x78aa0000 - 0x78b5e000 C:\Program Files\Java\jre7\bin\msvcr100.dll 0x6d940000 - 0x6dc61000 C:\Program Files\Java\jre7\bin\client\jvm.dll 0x71ad0000 - 0x71ad9000 C:\WINDOWS\system32\WSOCK32.dll 0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll 0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll 0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll 0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL 0x6d8d0000 - 0x6d8dc000 C:\Program Files\Java\jre7\bin\verify.dll 0x6d370000 - 0x6d390000 C:\Program Files\Java\jre7\bin\java.dll 0x6d920000 - 0x6d933000 C:\Program Files\Java\jre7\bin\zip.dll 0x6cec0000 - 0x6cf42000 C:\Documents and Settings\7stl0225\Local Settings\Temp\libgdx7stl0225\37fe1abc\gdx.dll 0x10000000 - 0x1004c000 C:\Documents and Settings\7stl0225\Local Settings\Temp\libgdx7stl0225\52d76f2b\lwjgl.dll 0x5ed00000 - 0x5edcc000 C:\WINDOWS\system32\OPENGL32.dll 0x68b20000 - 0x68b40000 C:\WINDOWS\system32\GLU32.dll 0x73760000 - 0x737ab000 C:\WINDOWS\system32\DDRAW.dll 0x73bc0000 - 0x73bc6000 C:\WINDOWS\system32\DCIMAN32.dll 0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll 0x070b0000 - 0x07115000 C:\DOCUME~1\7stl0225\LOCALS~1\Temp\libgdx7stl0225\52d76f2b\OpenAL32.dll 0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\SHELL32.dll 0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll 0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll 0x76fd0000 - 0x7704f000 C:\WINDOWS\system32\CLBCATQ.DLL 0x77050000 - 0x77115000 C:\WINDOWS\system32\COMRes.dll 0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.dll 0x73f10000 - 0x73f6c000 C:\WINDOWS\system32\dsound.dll 0x76c30000 - 0x76c5e000 C:\WINDOWS\system32\WINTRUST.dll 0x77a80000 - 0x77b15000 C:\WINDOWS\system32\CRYPT32.dll 0x77b20000 - 0x77b32000 C:\WINDOWS\system32\MSASN1.dll 0x76c90000 - 0x76cb8000 C:\WINDOWS\system32\IMAGEHLP.dll 0x72d20000 - 0x72d29000 C:\WINDOWS\system32\wdmaud.drv 0x72d10000 - 0x72d18000 C:\WINDOWS\system32\msacm32.drv 0x77be0000 - 0x77bf5000 C:\WINDOWS\system32\MSACM32.dll 0x77bd0000 - 0x77bd7000 C:\WINDOWS\system32\midimap.dll 0x73ee0000 - 0x73ee4000 C:\WINDOWS\system32\KsUser.dll 0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime 0x69000000 - 0x691a9000 C:\WINDOWS\system32\sisgl.dll 0x73b30000 - 0x73b45000 C:\WINDOWS\system32\mscms.dll 0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV 0x66e90000 - 0x66ed1000 C:\WINDOWS\system32\icm32.dll 0x07760000 - 0x0778d000 C:\Program Files\WordWeb\WHook.dll 0x74c80000 - 0x74cac000 C:\WINDOWS\system32\OLEACC.dll 0x76080000 - 0x760e5000 C:\WINDOWS\system32\MSVCP60.dll VM Arguments: jvm_args: -Dfile.encoding=Cp1252 java_command: sevenseas.game.MainDesktop Launcher Type: SUN_STANDARD Environment Variables: PATH=C:/Program Files/Java/jre7/bin/client;C:/Program Files/Java/jre7/bin;C:/Program Files/Java/jre7/lib/i386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Java\jdk1.7.0\bin;C:\eclipse; USERNAME=7stl0225 OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 1, GenuineIntel --------------- S Y S T E M --------------- OS: Windows XP Build 2600 Service Pack 3 CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 4 stepping 1, cmov, cx8, fxsr, mmx, sse, sse2, sse3 Memory: 4k page, physical 2031088k(939252k free), swap 3969920k(3011396k free) vm_info: Java HotSpot(TM) Client VM (21.0-b17) for windows-x86 JRE (1.7.0-b147), built on Jun 27 2011 02:25:52 by "java_re" with unknown MS VC++:1600 time: Sat Oct 26 12:35:14 2013 elapsed time: 0 seconds

  Read the article

• No root file system is defined error after installation

  - by LearnCode

  I installed ubuntu through Wubi and once i rebooted I get no root file system defined error. here's the output of the boot_info_script.Could anyone point me out where the error is. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe /ntldr /ntdetect.com /wubildr /ubuntu/winboot/wubildr /wubildr.mbr /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk /ubuntu/disks/swap.disk sda1/Wubi: _____________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: vfat Boot sector type: Unknown Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /boot.ini /ntldr /NTDETECT.COM sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 301,250,879 301,250,817 7 NTFS / exFAT / HPFS /dev/sda2 301,250,943 312,575,759 11,324,817 c W95 FAT32 (LBA) GUID Partition Table detected, but does not seem to be used. Partition Start Sector End Sector # of Sectors System /dev/sda1 323,465,741,313,502,988275,962,973,585-323,465,465,350,529,402 - /dev/sda2 242,728,591,638,290,720578,721,383,108,845,578335,992,791,470,554,859 - /dev/sda3 1,827,498,311,425,204,2562,091,935,274,843,009,907264,436,963,417,805,652 - /dev/sda4 579,711,218,081,401,3572,006,665,459,744,645,1521,426,954,241,663,243,796 - /dev/sda11 270,286,346,402,038,1183,786,543,326,404,525,9543,516,256,980,002,487,837 - /dev/sda12 4,179,681,002,230,769,6684,179,389,374,010,033,387-291,628,220,736,280 - /dev/sda13 232,556,480,979,456,1311,160,152,593,793,119,235927,596,112,813,663,105 - /dev/sda14 98,342,784,050,266,9183,691,264,578,843,725,1953,592,921,794,793,458,278 - /dev/sda15 2,307,845,219,957,882,4961,850,841,032,955,276,350-457,004,187,002,606,145 - /dev/sda16 512,592,046,878,946,497368,458,231,024,779,444-144,133,815,854,167,052 - /dev/sda17 2,504,135,232,870,384,3923,665,087,872,719,320,8291,160,952,639,848,936,438 - /dev/sda18 3,783,181,605,270,691,304122,034,509,624,708,942-3,661,147,095,645,982,361 - /dev/sda19 3,519,661,520,275,829,5122,376,243,094,723,723,587-1,143,418,425,552,105,924 - /dev/sda20 3,867,920,076,859,0744,494,691,111,933,625,1044,490,823,191,856,766,031 - /dev/sda21 1,500,144,061,909,253,7612,511,182,033,846,676,3401,011,037,971,937,422,580 - /dev/sda22 13,035,625,499,900,0062,360,168,613,941,394,9472,347,132,988,441,494,942 - /dev/sda23 4,228,978,682,068,599,48813,159,423,631,648,263-4,215,819,258,436,951,224 - /dev/sda24 3,695,955,742,872,046,9084,561,928,726,501,845,776865,972,983,629,798,869 - /dev/sda25 1,297,460,286,683,948,0461,444,350,486,339,417,957146,890,199,655,469,912 - /dev/sda26 1,228,858,248,533,131,831 0-1,228,858,248,533,131,830 - /dev/sda121 3,189,184,846,146,487,1461,849,820,258,006,914,852-1,339,364,588,139,572,293 - /dev/sda122 1,226,215,547,991,800,578389,781,518,734,546,300-836,434,029,257,254,277 - /dev/sda123 3,851,660,168,574,583,4654,046,215,657,583,031,556194,555,489,008,448,092 - /dev/sda124 1,197,460,980,174,153,341699,103,965,005,093,246-498,357,015,169,060,094 - Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 750.2 GB, 750153367552 bytes 255 heads, 63 sectors/track, 91200 cylinders, total 1465143296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 1,465,143,295 1,465,141,248 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 iso9660 Ubuntu 11.04 amd64 /dev/loop1 squashfs /dev/sda1 E814B55B14B52E06 ntfs /dev/sda2 01CD-023B vfat HP_RECOVERY /dev/sdb1 7836F22A36F1E8D0 ntfs Elements ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /cdrom iso9660 (ro,noatime) /dev/loop1 /rofs squashfs (ro,noatime) /dev/sdb1 /mnt fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) ================================ sda2/boot.ini: ================================ -------------------------------------------------------------------------------- [boot loader] timeout=0 default=C:\CMDCONS\BOOTSECT.DAT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons -------------------------------------------------------------------------------- ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown GPT Partiton Type c104043000e9b9040dff24b580010100 Unknown GPT Partiton Type 46313020746f20737461727420746865 Unknown GPT Partiton Type 65727920706172746974696f6e207761 Unknown GPT Partiton Type 727920706172746974696f6e0d0a0000 Unknown GPT Partiton Type 000f84e5f7668b162404e82804744066 Unknown GPT Partiton Type ce01e8dc038bfe66391624047505e8d9 Unknown GPT Partiton Type 0345086603f0e881030bd2740333d240 Unknown GPT Partiton Type bece01e8db0287fec645041266895508 Unknown GPT Partiton Type 01f60634010175078b363b01e854f5e8 Unknown GPT Partiton Type 313825740ffec03865107408fec03824 Unknown GPT Partiton Type 02f60634014074088bfdbece01e85101 Unknown GPT Partiton Type 263401f9e894f30f858ef4e8e201e8ec Unknown GPT Partiton Type f7e960f35245434f5645525966606633 Unknown GPT Partiton Type 660faf1e00106603dac3668b0e001066 Unknown GPT Partiton Type 8bfd386d04740583c710e2f6c36660c6 Unknown GPT Partiton Type 04ebf132c0b91000f3aac3bf0c04ebf3 Unknown GPT Partiton Type 02662bc1660fb71e0e02662bc366031e Unknown GPT Partiton Type f4b40ebb0700b901003c08751381ff25 Unknown GPT Partiton Type 534f465448494e4b90653f62011b0100 Unknown GPT Partiton Type 0b050900027777772e68702e636f6d00 Unknown GPT Partiton Type d441a0f5030003000ecb744a08bb3746 Unknown GPT Partiton Type f8579a116b4a7aa931cde97a4b9b5c09 Unknown GPT Partiton Type 7229990415b77c0a1970e7e824237a3a Unknown GPT Partiton Type afb6e34d6b4bd8c7c0eada19a9786cc3 Unknown BootLoader on sda1/Wubi 00000000 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 |0000000000000000| * 00000200 Unknown BootLoader on sda2 00000000 e9 a7 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .| 00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 7f b9 f4 11 |........?.......| 00000020 8c cd ac 00 1e 2b 00 00 00 00 00 00 02 00 00 00 |.....+..........| 00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000040 80 00 29 3b 02 cd 01 20 20 20 20 20 20 20 20 20 |..);... | 00000050 20 20 46 41 54 33 32 20 20 20 8b d0 c1 e2 02 80 | FAT32 ......| 00000060 e6 01 66 c1 e8 07 66 3b 46 f8 74 2a 66 89 46 f8 |..f...f;F.t*f.F.| 00000070 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f 3a 5e |f.F.f..^(...t.:^| 00000080 10 0f 83 90 00 66 0f af 5e 24 66 03 c3 bb e0 07 |.....f..^$f.....| 00000090 b9 01 00 e8 cf 00 8b da 66 8b 87 00 7e 66 25 ff |........f...~f%.| 000000a0 ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 8e c1 |...f=.....3.....| 000000b0 8e d1 66 bc f4 7b 00 00 bd 00 7c 66 0f b6 46 10 |..f..{....|f..F.| 000000c0 66 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 |f.f$f..V.f.V.f.V| 000000d0 f4 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff |.f..f.F.f.F.....| 000000e0 66 8b 46 2c 66 50 e8 af 00 bb 70 00 b9 01 00 e8 |f.F,fP....p.....| 000000f0 73 00 bf 00 07 b1 0b be a9 7d f3 a6 74 2a 03 f9 |s........}..t*..| 00000100 83 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 |[email protected]| 00000110 e8 47 ff 72 cf be b4 7d ac 84 c0 74 09 b4 0e bb |.G.r...}...t....| 00000120 07 00 cd 10 eb f2 cd 19 66 58 ff 75 09 ff 75 0f |........fX.u..u.| 00000130 66 58 bb 00 20 66 83 f8 02 72 da 66 3d f8 ff ff |fX.. f...r.f=...| 00000140 0f 73 d2 66 50 e8 50 00 0f b6 4e 0d e8 16 00 c1 |.s.fP.P...N.....| 00000150 e1 05 03 d9 66 58 53 e8 00 ff 5b 72 d8 8a 56 40 |....fXS...[r..V@| 00000160 ea 00 00 00 20 66 60 66 6a 00 66 50 53 6a 00 66 |.... f`fj.fPSj.f| 00000170 68 10 00 01 00 8b f4 b8 00 42 8a 56 40 cd 13 be |h........B.V@...| 00000180 c7 7d 72 94 67 83 44 24 06 20 66 67 ff 44 24 08 |.}r.g.D$. fg.D$.| 00000190 e2 e3 83 c4 10 66 61 c3 66 48 66 48 66 0f b6 56 |.....fa.fHfHf..V| 000001a0 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c 44 52 20 20 |.f..f.F..NTLDR | 000001b0 20 20 20 20 0d 0a 4e 6f 20 53 79 73 74 65 6d 20 | ..No System | 000001c0 44 69 73 6b 20 6f 72 0d 0a 44 69 73 6b 20 49 2f |Disk or..Disk I/| 000001d0 4f 20 65 72 72 6f 72 0d 0a 50 72 65 73 73 20 61 |O error..Press a| 000001e0 20 6b 65 79 20 74 6f 20 72 65 73 74 61 72 74 0d | key to restart.| 000001f0 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== umount: /isodevice: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))

  Read the article

• Cost Comparison Hard Disk Drive to Solid State Drive on Price per Gigabyte - dispelling a myth!

  - by tonyrogerson

  It is often said that Hard Disk Drive storage is significantly cheaper per GiByte than Solid State Devices – this is wholly inaccurate within the database space. People need to look at the cost of the complete solution and not just a single component part in isolation to what is really required to meet the business requirement. Buying a single Hitachi Ultrastar 600GB 3.5” SAS 15Krpm hard disk drive will cost approximately £239.60 (http://scan.co.uk, 22nd March 2012) compared to an OCZ 600GB Z-Drive R4 CM84 PCIe costing £2,316.54 (http://scan.co.uk, 22nd March 2012); I’ve not included FusionIO ioDrive because there is no public pricing available for it – something I never understand and personally when companies do this I immediately think what are they hiding, luckily in FusionIO’s case the product is proven though is expensive compared to OCZ enterprise offerings. On the face of it the single 15Krpm hard disk has a price per GB of £0.39, the SSD £3.86; this is what you will see in the press and this is what sales people will use in comparing the two technologies – do not be fooled by this bullshit people! What is the requirement? The requirement is the database will have a static size of 400GB kept static through archiving so growth and trim will balance the database size, the client requires resilience, there will be several hundred call centre staff querying the database where queries will read a small amount of data but there will be no hot spot in the data so the randomness will come across the entire 400GB of the database, estimates predict that the IOps required will be approximately 4,000IOps at peak times, because it’s a call centre system the IO latency is important and must remain below 5ms per IO. The balance between read and write is 70% read, 30% write. The requirement is now defined and we have three of the most important pieces of the puzzle – space required, estimated IOps and maximum latency per IO. Something to consider with regard SQL Server; write activity requires synchronous IO to the storage media specifically the transaction log; that means the write thread will wait until the IO is completed and hardened off until the thread can continue execution, the requirement has stated that 30% of the system activity will be write so we can expect a high amount of synchronous activity. The hardware solution needs to be defined; two possible solutions: hard disk or solid state based; the real question now is how many hard disks are required to achieve the IO throughput, the latency and resilience, ditto for the solid state. Hard Drive solution On a test on an HP DL380, P410i controller using IOMeter against a single 15Krpm 146GB SAS drive, the throughput given on a transfer size of 8KiB against a 40GiB file on a freshly formatted disk where the partition is the only partition on the disk thus the 40GiB file is on the outer edge of the drive so more sectors can be read before head movement is required: For 100% sequential IO at a queue depth of 16 with 8 worker threads 43,537 IOps at an average latency of 2.93ms (340 MiB/s), for 100% random IO at the same queue depth and worker threads 3,733 IOps at an average latency of 34.06ms (34 MiB/s). The same test was done on the same disk but the test file was 130GiB: For 100% sequential IO at a queue depth of 16 with 8 worker threads 43,537 IOps at an average latency of 2.93ms (340 MiB/s), for 100% random IO at the same queue depth and worker threads 528 IOps at an average latency of 217.49ms (4 MiB/s). From the result it is clear random performance gets worse as the disk fills up – I’m currently writing an article on short stroking which will cover this in detail. Given the work load is random in nature looking at the random performance of the single drive when only 40 GiB of the 146 GB is used gives near the IOps required but the latency is way out. Luckily I have tested 6 x 15Krpm 146GB SAS 15Krpm drives in a RAID 0 using the same test methodology, for the same test above on a 130 GiB for each drive added the performance boost is near linear, for each drive added throughput goes up by 5 MiB/sec, IOps by 700 IOps and latency reducing nearly 50% per drive added (172 ms, 94 ms, 65 ms, 47 ms, 37 ms, 30 ms). This is because the same 130GiB is spread out more as you add drives 130 / 1, 130 / 2, 130 / 3 etc. so implicit short stroking is occurring because there is less file on each drive so less head movement required. The best latency is still 30 ms but we have the IOps required now, but that’s on a 130GiB file and not the 400GiB we need. Some reality check here: a) the drive randomness is more likely to be 50/50 and not a full 100% but the above has highlighted the effect randomness has on the drive and the more a drive fills with data the worse the effect. For argument sake let us assume that for the given workload we need 8 disks to do the job, for resilience reasons we will need 16 because we need to RAID 1+0 them in order to get the throughput and the resilience, RAID 5 would degrade performance. Cost for hard drives: 16 x £239.60 = £3,833.60 For the hard drives we will need disk controllers and a separate external disk array because the likelihood is that the server itself won’t take the drives, a quick spec off DELL for a PowerVault MD1220 which gives the dual pathing with 16 disks 146GB 15Krpm 2.5” disks is priced at £7,438.00, note its probably more once we had two controller cards to sit in the server in, racking etc. Minimum cost taking the DELL quote as an example is therefore: {Cost of Hardware} / {Storage Required} £7,438.60 / 400 = £18.595 per GB £18.59 per GiB is a far cry from the £0.39 we had been told by the salesman and the myth. Yes, the storage array is composed of 16 x 146 disks in RAID 10 (therefore 8 usable) giving an effective usable storage availability of 1168GB but the actual storage requirement is only 400 and the extra disks have had to be purchased to get the  IOps up. Solid State Drive solution A single card significantly exceeds the IOps and latency required, for resilience two will be required. ( £2,316.54 * 2 ) / 400 = £11.58 per GB With the SSD solution only two PCIe sockets are required, no external disk units, no additional controllers, no redundant controllers etc. Conclusion I hope by showing you an example that the myth that hard disk drives are cheaper per GiB than Solid State has now been dispelled - £11.58 per GB for SSD compared to £18.59 for Hard Disk. I’ve not even touched on the running costs, compare the costs of running 18 hard disks, that’s a lot of heat and power compared to two PCIe cards!Just a quick note: I've left a fair amount of information out due to this being a blog! If in doubt, email me :)I'll also deal with the myth that SSD's wear out at a later date as well - that's just way over done still, yes, 5 years ago, but now - no.

  Read the article

• ASP.NET WebAPI Security 3: Extensible Authentication Framework

  - by Your DisplayName here!

  In my last post, I described the identity architecture of ASP.NET Web API. The short version was, that Web API (beta 1) does not really have an authentication system on its own, but inherits the client security context from its host. This is fine in many situations (e.g. AJAX style callbacks with an already established logon session). But there are many cases where you don’t use the containing web application for authentication, but need to do it yourself. Examples of that would be token based authentication and clients that don’t run in the context of the web application (e.g. desktop clients / mobile). Since Web API provides a nice extensibility model, it is easy to implement whatever security framework you want on top of it. My design goals were: Easy to use. Extensible. Claims-based. ..and of course, this should always behave the same, regardless of the hosting environment. In the rest of the post I am outlining some of the bits and pieces, So you know what you are dealing with, in case you want to try the code. At the very heart… is a so called message handler. This is a Web API extensibility point that gets to see (and modify if needed) all incoming and outgoing requests. Handlers run after the conversion from host to Web API, which means that handler code deals with HttpRequestMessage and HttpResponseMessage. See Pedro’s post for more information on the processing pipeline. This handler requires a configuration object for initialization. Currently this is very simple, it contains: Settings for the various authentication and credential types Settings for claims transformation Ability to block identity inheritance from host The most important part here is the credential type support, but I will come back to that later. The logic of the message handler is simple: Look at the incoming request. If the request contains an authorization header, try to authenticate the client. If this is successful, create a claims principal and populate the usual places. If not, return a 401 status code and set the Www-Authenticate header. Look at outgoing response, if the status code is 401, set the Www-Authenticate header. Credential type support Under the covers I use the WIF security token handler infrastructure to validate credentials and to turn security tokens into claims. The idea is simple: an authorization header consists of two pieces: the schema and the actual “token”. My configuration object allows to associate a security token handler with a scheme. This way you only need to implement support for a specific credential type, and map that to the incoming scheme value. The current version supports HTTP Basic Authentication as well as SAML and SWT tokens. (I needed to do some surgery on the standard security token handlers, since WIF does not directly support string-ified tokens. The next version of .NET will fix that, and the code should become simpler then). You can e.g. use this code to hook up a username/password handler to the Basic scheme (the default scheme name for Basic Authentication). config.Handler.AddBasicAuthenticationHandler( (username, password) => username == password); You simply have to provide a password validation function which could of course point back to your existing password library or e.g. membership. The following code maps a token handler for Simple Web Tokens (SWT) to the Bearer scheme (the currently favoured scheme name for OAuth2). You simply have to specify the issuer name, realm and shared signature key: config.Handler.AddSimpleWebTokenHandler(     "Bearer",     http://identity.thinktecture.com/trust,     Constants.Realm,     "Dc9Mpi3jaaaUpBQpa/4R7XtUsa3D/ALSjTVvK8IUZbg="); For certain integration scenarios it is very useful if your Web API can consume SAML tokens. This is also easily accomplishable. The following code uses the standard WIF API to configure the usual SAMLisms like issuer, audience, service certificate and certificate validation. Both SAML 1.1 and 2.0 are supported. var registry = new ConfigurationBasedIssuerNameRegistry(); registry.AddTrustedIssuer( "d1 c5 b1 25 97 d0 36 94 65 1c e2 64 fe 48 06 01 35 f7 bd db", "ADFS"); var adfsConfig = new SecurityTokenHandlerConfiguration(); adfsConfig.AudienceRestriction.AllowedAudienceUris.Add( new Uri(Constants.Realm)); adfsConfig.IssuerNameRegistry = registry; adfsConfig.CertificateValidator = X509CertificateValidator.None; // token decryption (read from configuration section) adfsConfig.ServiceTokenResolver = FederatedAuthentication.ServiceConfiguration.CreateAggregateTokenResolver(); config.Handler.AddSaml11SecurityTokenHandler("SAML", adfsConfig); Claims Transformation After successful authentication, if configured, the standard WIF ClaimsAuthenticationManager is called to run claims transformation and validation logic. This stage is used to transform the “technical” claims from the security token into application claims. You can either have a separate transformation logic, or share on e.g. with the containing web application. That’s just a matter of configuration. Adding the authentication handler to a Web API application In the spirit of Web API this is done in code, e.g. global.asax for web hosting: protected void Application_Start() {     AreaRegistration.RegisterAllAreas();     ConfigureApis(GlobalConfiguration.Configuration);     RegisterGlobalFilters(GlobalFilters.Filters);     RegisterRoutes(RouteTable.Routes);     BundleTable.Bundles.RegisterTemplateBundles(); } private void ConfigureApis(HttpConfiguration configuration) {     configuration.MessageHandlers.Add( new AuthenticationHandler(ConfigureAuthentication())); } private AuthenticationConfiguration ConfigureAuthentication() {     var config = new AuthenticationConfiguration     {         // sample claims transformation for consultants sample, comment out to see raw claims         ClaimsAuthenticationManager = new ApiClaimsTransformer(),         // value of the www-authenticate header, // if not set, the first scheme added to the handler collection is used         DefaultAuthenticationScheme = "Basic"     };     // add token handlers - see above     return config; } You can find the full source code and some samples here. In the next post I will describe some of the samples in the download, and then move on to authorization. HTH

  Read the article

• SQL Server script commands to check if object exists and drop it

  - by deadlydog

  Over the past couple years I’ve been keeping track of common SQL Server script commands that I use so I don’t have to constantly Google them.  Most of them are how to check if a SQL object exists before dropping it.  I thought others might find these useful to have them all in one place, so here you go: 1: --=============================== 2: -- Create a new table and add keys and constraints 3: --=============================== 4: IF NOT EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'TableName' AND TABLE_SCHEMA='dbo') 5: BEGIN 6: CREATE TABLE [dbo].[TableName] 7: ( 8: [ColumnName1] INT NOT NULL, -- To have a field auto-increment add IDENTITY(1,1) 9: [ColumnName2] INT NULL, 10: [ColumnName3] VARCHAR(30) NOT NULL DEFAULT('') 11: ) 12: 13: -- Add the table's primary key 14: ALTER TABLE [dbo].[TableName] ADD CONSTRAINT [PK_TableName] PRIMARY KEY NONCLUSTERED 15: ( 16: [ColumnName1], 17: [ColumnName2] 18: ) 19: 20: -- Add a foreign key constraint 21: ALTER TABLE [dbo].[TableName] WITH CHECK ADD CONSTRAINT [FK_Name] FOREIGN KEY 22: ( 23: [ColumnName1], 24: [ColumnName2] 25: ) 26: REFERENCES [dbo].[Table2Name] 27: ( 28: [OtherColumnName1], 29: [OtherColumnName2] 30: ) 31: 32: -- Add indexes on columns that are often used for retrieval 33: CREATE INDEX IN_ColumnNames ON [dbo].[TableName] 34: ( 35: [ColumnName2], 36: [ColumnName3] 37: ) 38: 39: -- Add a check constraint 40: ALTER TABLE [dbo].[TableName] WITH CHECK ADD CONSTRAINT [CH_Name] CHECK (([ColumnName] >= 0.0000)) 41: END 42: 43: --=============================== 44: -- Add a new column to an existing table 45: --=============================== 46: IF NOT EXISTS (SELECT * FROM INFORMATION_SCHEMA.COLUMNS where TABLE_SCHEMA='dbo' 47: AND TABLE_NAME = 'TableName' AND COLUMN_NAME = 'ColumnName') 48: BEGIN 49: ALTER TABLE [dbo].[TableName] ADD [ColumnName] INT NOT NULL DEFAULT(0) 50: 51: -- Add a description extended property to the column to specify what its purpose is. 52: EXEC sys.sp_addextendedproperty @name=N'MS_Description', 53: @value = N'Add column comments here, describing what this column is for.' , 54: @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'TABLE', 55: @level1name = N'TableName', @level2type=N'COLUMN', 56: @level2name = N'ColumnName' 57: END 58: 59: --=============================== 60: -- Drop a table 61: --=============================== 62: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'TableName' AND TABLE_SCHEMA='dbo') 63: BEGIN 64: DROP TABLE [dbo].[TableName] 65: END 66: 67: --=============================== 68: -- Drop a view 69: --=============================== 70: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.VIEWS WHERE TABLE_NAME = 'ViewName' AND TABLE_SCHEMA='dbo') 71: BEGIN 72: DROP VIEW [dbo].[ViewName] 73: END 74: 75: --=============================== 76: -- Drop a column 77: --=============================== 78: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.COLUMNS where TABLE_SCHEMA='dbo' 79: AND TABLE_NAME = 'TableName' AND COLUMN_NAME = 'ColumnName') 80: BEGIN 81: 82: -- If the column has an extended property, drop it first. 83: IF EXISTS (SELECT * FROM sys.fn_listExtendedProperty(N'MS_Description', N'SCHEMA', N'dbo', N'Table', 84: N'TableName', N'COLUMN', N'ColumnName') 85: BEGIN 86: EXEC sys.sp_dropextendedproperty @name=N'MS_Description', 87: @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'TABLE', 88: @level1name = N'TableName', @level2type=N'COLUMN', 89: @level2name = N'ColumnName' 90: END 91: 92: ALTER TABLE [dbo].[TableName] DROP COLUMN [ColumnName] 93: END 94: 95: --=============================== 96: -- Drop Primary key constraint 97: --=============================== 98: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='PRIMARY KEY' AND TABLE_SCHEMA='dbo' 99: AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'PK_Name') 100: BEGIN 101: ALTER TABLE [dbo].[TableName] DROP CONSTRAINT [PK_Name] 102: END 103: 104: --=============================== 105: -- Drop Foreign key constraint 106: --=============================== 107: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='FOREIGN KEY' AND TABLE_SCHEMA='dbo' 108: AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'FK_Name') 109: BEGIN 110: ALTER TABLE [dbo].[TableName] DROP CONSTRAINT [FK_Name] 111: END 112: 113: --=============================== 114: -- Drop Unique key constraint 115: --=============================== 116: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='UNIQUE' AND TABLE_SCHEMA='dbo' 117: AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'UNI_Name') 118: BEGIN 119: ALTER TABLE [dbo].[TableNames] DROP CONSTRAINT [UNI_Name] 120: END 121: 122: --=============================== 123: -- Drop Check constraint 124: --=============================== 125: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='CHECK' AND TABLE_SCHEMA='dbo' 126: AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'CH_Name') 127: BEGIN 128: ALTER TABLE [dbo].[TableName] DROP CONSTRAINT [CH_Name] 129: END 130: 131: --=============================== 132: -- Drop a column's Default value constraint 133: --=============================== 134: DECLARE @ConstraintName VARCHAR(100) 135: SET @ConstraintName = (SELECT TOP 1 s.name FROM sys.sysobjects s JOIN sys.syscolumns c ON s.parent_obj=c.id 136: WHERE s.xtype='d' AND c.cdefault=s.id 137: AND parent_obj = OBJECT_ID('TableName') AND c.name ='ColumnName') 138: 139: IF @ConstraintName IS NOT NULL 140: BEGIN 141: EXEC ('ALTER TABLE [dbo].[TableName] DROP CONSTRAINT ' + @ConstraintName) 142: END 143: 144: --=============================== 145: -- Example of how to drop dynamically named Unique constraint 146: --=============================== 147: DECLARE @ConstraintName VARCHAR(100) 148: SET @ConstraintName = (SELECT TOP 1 CONSTRAINT_NAME FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS 149: WHERE CONSTRAINT_TYPE='UNIQUE' AND TABLE_SCHEMA='dbo' 150: AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME LIKE 'FirstPartOfConstraintName%') 151: 152: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='UNIQUE' AND TABLE_SCHEMA='dbo' 153: AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = @ConstraintName) 154: BEGIN 155: EXEC ('ALTER TABLE [dbo].[TableName] DROP CONSTRAINT ' + @ConstraintName) 156: END 157: 158: --=============================== 159: -- Check for and drop a temp table 160: --=============================== 161: IF OBJECT_ID('tempdb..#TableName') IS NOT NULL DROP TABLE #TableName 162: 163: --=============================== 164: -- Drop a stored procedure 165: --=============================== 166: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_TYPE='PROCEDURE' AND ROUTINE_SCHEMA='dbo' AND 167: ROUTINE_NAME = 'StoredProcedureName') 168: BEGIN 169: DROP PROCEDURE [dbo].[StoredProcedureName] 170: END 171: 172: --=============================== 173: -- Drop a UDF 174: --=============================== 175: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_TYPE='FUNCTION' AND ROUTINE_SCHEMA='dbo' AND 176: ROUTINE_NAME = 'UDFName') 177: BEGIN 178: DROP FUNCTION [dbo].[UDFName] 179: END 180: 181: --=============================== 182: -- Drop an Index 183: --=============================== 184: IF EXISTS (SELECT * FROM SYS.INDEXES WHERE name = 'IndexName') 185: BEGIN 186: DROP INDEX TableName.IndexName 187: END 188: 189: --=============================== 190: -- Drop a Schema 191: --=============================== 192: IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.SCHEMATA WHERE SCHEMA_NAME = 'SchemaName') 193: BEGIN 194: EXEC('DROP SCHEMA SchemaName') 195: END And here’s the same code, just not in the little code view window so that you don’t have to scroll it.--=============================== -- Create a new table and add keys and constraints --=============================== IF NOT EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'TableName' AND TABLE_SCHEMA='dbo') BEGIN CREATE TABLE [dbo].[TableName]  ( [ColumnName1] INT NOT NULL, -- To have a field auto-increment add IDENTITY(1,1) [ColumnName2] INT NULL, [ColumnName3] VARCHAR(30) NOT NULL DEFAULT('') ) -- Add the table's primary key ALTER TABLE [dbo].[TableName] ADD CONSTRAINT [PK_TableName] PRIMARY KEY NONCLUSTERED ( [ColumnName1],  [ColumnName2] ) -- Add a foreign key constraint ALTER TABLE [dbo].[TableName] WITH CHECK ADD CONSTRAINT [FK_Name] FOREIGN KEY ( [ColumnName1],  [ColumnName2] ) REFERENCES [dbo].[Table2Name]  ( [OtherColumnName1],  [OtherColumnName2] ) -- Add indexes on columns that are often used for retrieval CREATE INDEX IN_ColumnNames ON [dbo].[TableName] ( [ColumnName2], [ColumnName3] ) -- Add a check constraint ALTER TABLE [dbo].[TableName] WITH CHECK ADD CONSTRAINT [CH_Name] CHECK (([ColumnName] >= 0.0000)) END --=============================== -- Add a new column to an existing table --=============================== IF NOT EXISTS (SELECT * FROM INFORMATION_SCHEMA.COLUMNS where TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND COLUMN_NAME = 'ColumnName') BEGIN ALTER TABLE [dbo].[TableName] ADD [ColumnName] INT NOT NULL DEFAULT(0) -- Add a description extended property to the column to specify what its purpose is. EXEC sys.sp_addextendedproperty @name=N'MS_Description',  @value = N'Add column comments here, describing what this column is for.' ,  @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'TABLE', @level1name = N'TableName', @level2type=N'COLUMN', @level2name = N'ColumnName' END --=============================== -- Drop a table --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'TableName' AND TABLE_SCHEMA='dbo') BEGIN DROP TABLE [dbo].[TableName] END --=============================== -- Drop a view --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.VIEWS WHERE TABLE_NAME = 'ViewName' AND TABLE_SCHEMA='dbo') BEGIN DROP VIEW [dbo].[ViewName] END --=============================== -- Drop a column --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.COLUMNS where TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND COLUMN_NAME = 'ColumnName') BEGIN -- If the column has an extended property, drop it first. IF EXISTS (SELECT * FROM sys.fn_listExtendedProperty(N'MS_Description', N'SCHEMA', N'dbo', N'Table', N'TableName', N'COLUMN', N'ColumnName') BEGIN EXEC sys.sp_dropextendedproperty @name=N'MS_Description',  @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'TABLE', @level1name = N'TableName', @level2type=N'COLUMN', @level2name = N'ColumnName' END ALTER TABLE [dbo].[TableName] DROP COLUMN [ColumnName] END --=============================== -- Drop Primary key constraint --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='PRIMARY KEY' AND TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'PK_Name') BEGIN ALTER TABLE [dbo].[TableName] DROP CONSTRAINT [PK_Name] END --=============================== -- Drop Foreign key constraint --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='FOREIGN KEY' AND TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'FK_Name') BEGIN ALTER TABLE [dbo].[TableName] DROP CONSTRAINT [FK_Name] END --=============================== -- Drop Unique key constraint --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='UNIQUE' AND TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'UNI_Name') BEGIN ALTER TABLE [dbo].[TableNames] DROP CONSTRAINT [UNI_Name] END --=============================== -- Drop Check constraint --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='CHECK' AND TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = 'CH_Name') BEGIN ALTER TABLE [dbo].[TableName] DROP CONSTRAINT [CH_Name] END --=============================== -- Drop a column's Default value constraint --=============================== DECLARE @ConstraintName VARCHAR(100) SET @ConstraintName = (SELECT TOP 1 s.name FROM sys.sysobjects s JOIN sys.syscolumns c ON s.parent_obj=c.id WHERE s.xtype='d' AND c.cdefault=s.id  AND parent_obj = OBJECT_ID('TableName') AND c.name ='ColumnName') IF @ConstraintName IS NOT NULL BEGIN EXEC ('ALTER TABLE [dbo].[TableName] DROP CONSTRAINT ' + @ConstraintName) END --=============================== -- Example of how to drop dynamically named Unique constraint --=============================== DECLARE @ConstraintName VARCHAR(100) SET @ConstraintName = (SELECT TOP 1 CONSTRAINT_NAME FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS  WHERE CONSTRAINT_TYPE='UNIQUE' AND TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME LIKE 'FirstPartOfConstraintName%') IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS WHERE CONSTRAINT_TYPE='UNIQUE' AND TABLE_SCHEMA='dbo' AND TABLE_NAME = 'TableName' AND CONSTRAINT_NAME = @ConstraintName) BEGIN EXEC ('ALTER TABLE [dbo].[TableName] DROP CONSTRAINT ' + @ConstraintName) END --=============================== -- Check for and drop a temp table --=============================== IF OBJECT_ID('tempdb..#TableName') IS NOT NULL DROP TABLE #TableName --=============================== -- Drop a stored procedure --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_TYPE='PROCEDURE' AND ROUTINE_SCHEMA='dbo' AND ROUTINE_NAME = 'StoredProcedureName') BEGIN DROP PROCEDURE [dbo].[StoredProcedureName] END --=============================== -- Drop a UDF --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_TYPE='FUNCTION' AND ROUTINE_SCHEMA='dbo' AND  ROUTINE_NAME = 'UDFName') BEGIN DROP FUNCTION [dbo].[UDFName] END --=============================== -- Drop an Index --=============================== IF EXISTS (SELECT * FROM SYS.INDEXES WHERE name = 'IndexName') BEGIN DROP INDEX TableName.IndexName END --=============================== -- Drop a Schema --=============================== IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.SCHEMATA WHERE SCHEMA_NAME = 'SchemaName') BEGIN EXEC('DROP SCHEMA SchemaName') END

  Read the article

• Wifi hotspot disconnected after some time

  - by Rohit Bansal

  I am trying to use my Ubuntu system as Wifi Hotspot, but for some reason Hotspot get disconnected on its own. Searching for the solution, I found this help : Why is my ethernet connection connecting and disconnecting repeatedly? Reading through the above article I used the following command sudo killall dnsmasq as a result I manage to establish hotspot for around 5-10 sec before getting disconnected as against immediately.... Here's the system log (in case needed) tail -f /var/log/syslog : Apr 1 23:31:42 NetworkManager[901]: <info> Starting dnsmasq... Apr 1 23:31:42 NetworkManager[901]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0] Apr 1 23:31:42 dnsmasq[4159]: started, version 2.57 cachesize 150 Apr 1 23:31:42 dnsmasq[4159]: compile time options: IPv6 GNU-getopt DBus I18N DHCP TFTP IDN Apr 1 23:31:42 dnsmasq-dhcp[4159]: DHCP, IP range 10.42.43.10 -- 10.42.43.100, lease time 1h Apr 1 23:31:42 dnsmasq[4159]: reading /etc/resolv.conf Apr 1 23:31:42 dnsmasq[4159]: using nameserver 220.226.6.104#53 Apr 1 23:31:42 dnsmasq[4159]: using nameserver 220.226.100.40#53 Apr 1 23:31:42 dnsmasq[4159]: cleared cache Apr 1 23:31:42 NetworkManager[901]: <info> Activation (wlan0) successful, device activated. Apr 1 23:31:42 NetworkManager[901]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Apr 1 23:31:42 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete. Apr 1 23:31:42 dbus[885]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Apr 1 23:31:42 dbus[885]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Connection established at this point....now disconnecting after 10 sec... Apr 1 23:31:52 ntpdate[4194]: adjust time server 91.189.94.4 offset -0.011589 sec Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): IP6 addrconf timed out or failed. Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled... Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started... Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --out-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --out-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --source 10.42.43.0/255.255.255.0 --in-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --destination 10.42.43.0/255.255.255.0 --out-interface wlan0 --match state --state ESTABLISHED,RELATED --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table nat --insert POSTROUTING --source 10.42.43.0/255.255.255.0 ! --destination 10.42.43.0/255.255.255.0 --jump MASQUERADE Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --out-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --out-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --source 10.42.43.0/255.255.255.0 --in-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --destination 10.42.43.0/255.255.255.0 --out-interface wlan0 --match state --state ESTABLISHED,RELATED --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table nat --insert POSTROUTING --source 10.42.43.0/255.255.255.0 ! --destination 10.42.43.0/255.255.255.0 --jump MASQUERADE Apr 1 23:32:01 NetworkManager[901]: <info> Starting dnsmasq... Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete. Apr 1 23:32:01 NetworkManager[901]: <warn> dnsmasq died with signal 9 Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): device state change: activated -> failed (reason 'sharing-start-failed') [100 120 18] Apr 1 23:32:01 dnsmasq[4235]: started, version 2.57 cachesize 150 Apr 1 23:32:01 dnsmasq[4235]: compile time options: IPv6 GNU-getopt DBus I18N DHCP TFTP IDN Apr 1 23:32:01 dnsmasq-dhcp[4235]: DHCP, IP range 10.42.43.10 -- 10.42.43.100, lease time 1h Apr 1 23:32:01 NetworkManager[901]: <warn> Activation (wlan0) failed for access point (Reppify Ubuntu) Apr 1 23:32:01 dnsmasq[4235]: reading /etc/resolv.conf Apr 1 23:32:01 dnsmasq[4235]: using nameserver 220.226.6.104#53 Apr 1 23:32:01 dnsmasq[4235]: using nameserver 220.226.100.40#53 Apr 1 23:32:01 dnsmasq[4235]: cleared cache Apr 1 23:32:01 NetworkManager[901]: <warn> Activation (wlan0) failed. Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0] Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): deactivating device (reason 'none') [0] Apr 1 23:32:01 dbus[885]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Apr 1 23:32:01 dbus[885]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Apr 1 23:32:01 NetworkManager[901]: <error> [1333303321.565351] [nm-device-wifi.c:1815] nm_device_wifi_set_mode(): (wlan0): error setting mode 2

  Read the article

• OData &ndash; The easiest service I can create: now with updates

  - by Jon Dalberg

  The other day I created a simple NastyWord service exposed via OData. It was read-only and used an in-memory backing store for the words. Today I’ll modify it to use a file instead of a list and I’ll accept new nasty words by implementing IUpdatable directly. The first thing to do is enable the service to accept new entries. This is done at configuration time by adding the “WriteAppend” access rule: 1: public class NastyWords : DataService<NastyWordsDataSource> 2: { 3: // This method is called only once to initialize service-wide policies. 4: public static void InitializeService(DataServiceConfiguration config) 5: { 6: config.SetEntitySetAccessRule("*", EntitySetRights.AllRead | EntitySetRights.WriteAppend); 7: config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; 8: } 9: }   Next I placed a file, NastyWords.txt, in the “App_Data” folder and added a few *choice* words to start. This required one simple change to our NastyWordDataSource.cs file: 1: public NastyWordsDataSource() 2: { 3: UpdateFromSource(); 4: } 5:   6: private void UpdateFromSource() 7: { 8: var words = File.ReadAllLines(pathToFile); 9: NastyWords = (from w in words 10: select new NastyWord { Word = w }).AsQueryable(); 11: }   Nothing too shocking here, just reading each line from the NastyWords.txt file and exposing them. Next, I implemented IUpdatable which comes with a boat-load of methods. We don’t need all of them for now since we are only concerned with allowing new values. Here are the methods we must implement, all the others throw a NotImplementedException: 1: public object CreateResource(string containerName, string fullTypeName) 2: { 3: var nastyWord = new NastyWord(); 4: pendingUpdates.Add(nastyWord); 5: return nastyWord; 6: } 7:   8: public object ResolveResource(object resource) 9: { 10: return resource; 11: } 12:   13: public void SaveChanges() 14: { 15: var intersect = (from w in pendingUpdates 16: select w.Word).Intersect(from n in NastyWords 17: select n.Word); 18:   19: if (intersect.Count() > 0) 20: throw new DataServiceException(500, "duplicate entry"); 21:   22: var lines = from w in pendingUpdates 23: select w.Word; 24:   25: File.AppendAllLines(pathToFile, 26: lines, 27: Encoding.UTF8); 28:   29: pendingUpdates.Clear(); 30:   31: UpdateFromSource(); 32: } 33:   34: public void SetValue(object targetResource, string propertyName, object propertyValue) 35: { 36: targetResource.GetType().GetProperty(propertyName).SetValue(targetResource, propertyValue, null); 37: }   I use a simple list to contain the pending updates and only commit them when the “SaveChanges” method is called. Here’s the order these methods are called in our service during an insert: CreateResource – here we just instantiate a new NastyWord and stick a reference to it in our pending updates list. SetValue – this is where the “Word” property of the NastyWord instance is set. SaveChanges – get the list of pending updates, barfing on duplicates, write them to the file and clear our pending list. ResolveResource – the newly created resource will be returned directly here since we aren’t dealing with “handles” to objects but the actual objects themselves. Not too bad, eh? I didn’t find this documented anywhere but a little bit of digging in the OData spec and use of Fiddler made it pretty easy to figure out. Here is some client code which would add a new nasty word: 1: static void Main(string[] args) 2: { 3: var svc = new ServiceReference1.NastyWordsDataSource(new Uri("http://localhost.:60921/NastyWords.svc")); 4: svc.AddToNastyWords(new ServiceReference1.NastyWord() { Word = "shat" }); 5:   6: svc.SaveChanges(); 7: }   Here’s all of the code so far for to implement the service: 1: using System; 2: using System.Collections.Generic; 3: using System.Data.Services; 4: using System.Data.Services.Common; 5: using System.Linq; 6: using System.ServiceModel.Web; 7: using System.Web; 8: using System.IO; 9: using System.Text; 10:   11: namespace ONasty 12: { 13: [DataServiceKey("Word")] 14: public class NastyWord 15: { 16: public string Word { get; set; } 17: } 18:   19: public class NastyWordsDataSource : IUpdatable 20: { 21: private List<NastyWord> pendingUpdates = new List<NastyWord>(); 22: private string pathToFile = @"path to your\App_Data\NastyWords.txt"; 23:   24: public NastyWordsDataSource() 25: { 26: UpdateFromSource(); 27: } 28:   29: private void UpdateFromSource() 30: { 31: var words = File.ReadAllLines(pathToFile); 32: NastyWords = (from w in words 33: select new NastyWord { Word = w }).AsQueryable(); 34: } 35:   36: public IQueryable<NastyWord> NastyWords { get; private set; } 37:   38: public void AddReferenceToCollection(object targetResource, string propertyName, object resourceToBeAdded) 39: { 40: throw new NotImplementedException(); 41: } 42:   43: public void ClearChanges() 44: { 45: pendingUpdates.Clear(); 46: } 47:   48: public object CreateResource(string containerName, string fullTypeName) 49: { 50: var nastyWord = new NastyWord(); 51: pendingUpdates.Add(nastyWord); 52: return nastyWord; 53: } 54:   55: public void DeleteResource(object targetResource) 56: { 57: throw new NotImplementedException(); 58: } 59:   60: public object GetResource(IQueryable query, string fullTypeName) 61: { 62: throw new NotImplementedException(); 63: } 64:   65: public object GetValue(object targetResource, string propertyName) 66: { 67: throw new NotImplementedException(); 68: } 69:   70: public void RemoveReferenceFromCollection(object targetResource, string propertyName, object resourceToBeRemoved) 71: { 72: throw new NotImplementedException(); 73: } 74:   75: public object ResetResource(object resource) 76: { 77: throw new NotImplementedException(); 78: } 79:   80: public object ResolveResource(object resource) 81: { 82: return resource; 83: } 84:   85: public void SaveChanges() 86: { 87: var intersect = (from w in pendingUpdates 88: select w.Word).Intersect(from n in NastyWords 89: select n.Word); 90:   91: if (intersect.Count() > 0) 92: throw new DataServiceException(500, "duplicate entry"); 93:   94: var lines = from w in pendingUpdates 95: select w.Word; 96:   97: File.AppendAllLines(pathToFile, 98: lines, 99: Encoding.UTF8); 100:   101: pendingUpdates.Clear(); 102:   103: UpdateFromSource(); 104: } 105:   106: public void SetReference(object targetResource, string propertyName, object propertyValue) 107: { 108: throw new NotImplementedException(); 109: } 110:   111: public void SetValue(object targetResource, string propertyName, object propertyValue) 112: { 113: targetResource.GetType().GetProperty(propertyName).SetValue(targetResource, propertyValue, null); 114: } 115: } 116:   117: public class NastyWords : DataService<NastyWordsDataSource> 118: { 119: // This method is called only once to initialize service-wide policies. 120: public static void InitializeService(DataServiceConfiguration config) 121: { 122: config.SetEntitySetAccessRule("*", EntitySetRights.AllRead | EntitySetRights.WriteAppend); 123: config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; 124: } 125: } 126: } Next time we’ll allow removing nasty words. Enjoy!

  Read the article

• What packages do I need to compile .tex documents using XeLaTeX?

  - by maria

  Hi I'm aware of the existence of similar threads on this forum. But any of replies mach to my problem. I'm using Ubuntu 10.4 and I hadn't problems with fonts till I've decided to use XeLaTeX instead of LaTeX (cf http://tex.stackexchange.com/questions/12347/typesetting-a-document-using-arabic-script/12358#12358). The problem is that I'm not able to compile any .tex document using XeLaTeX, as well as properly display XeLaTeX documentation. As I've learn thanks to mentioned thread, XeLaTeX uses the fonts availables in general in the system. I was trying yo read fontspec documentation, but it opens in pdf with a lot of white gaps and terminal output (quite long) consist mostly of errors. This are just few lines of it: Error: Missing language pack for 'Adobe-Japan1' mapping Error: Unknown font tag 'F5.1' Error (24124): No font in show Error: Unknown font tag 'F5.1' I was trying to compile simple XeLaTeX file: \documentclass{article} \usepackage{fontspec} \setmainfont{Linux Libertine O} \begin{document} Hello World! \end{document} without succes. This is terminal output of compilation: This is XeTeX, Version 3.1415926-2.2-0.9995.2 (TeX Live 2009/Debian) restricted \write18 enabled. entering extended mode (./ex.tex LaTeX2e <2009/09/24> Babel <v3.8l> and hyphenation patterns for english, usenglishmax, dumylang, noh yphenation, polish, loaded. (/usr/share/texmf-texlive/tex/latex/base/article.cls Document Class: article 2007/10/19 v1.4h Standard LaTeX document class (/usr/share/texmf-texlive/tex/latex/base/size10.clo)) (/usr/share/texmf-texlive/tex/xelatex/fontspec/fontspec.sty (/usr/share/texmf-texlive/tex/generic/ifxetex/ifxetex.sty) (/usr/share/texmf-texlive/tex/latex/tools/calc.sty) (/usr/share/texmf-texlive/tex/latex/xkeyval/xkeyval.sty (/usr/share/texmf-texlive/tex/generic/xkeyval/xkeyval.tex (/usr/share/texmf-texlive/tex/generic/xkeyval/keyval.tex))) (/usr/share/texmf-texlive/tex/latex/base/fontenc.sty (/usr/share/texmf-texlive/tex/xelatex/euenc/eu1enc.def) (/usr/share/texmf-texlive/tex/xelatex/euenc/eu1lmr.fd)) fontspec.cfg loaded. (/usr/share/texmf-texlive/tex/xelatex/fontspec/fontspec.cfg))kpathsea: Invalid fontname `Linux Libertine O', contains ' ' ! Font \zf@basefont="Linux Libertine O" at 10.0pt not loadable: Metric (TFM) fi le or installed font not found. \zf@fontspec ...ntname \zf@suffix " at \f@size pt \unless \ifzf@icu \zf@set@... l.3 \setmainfont{Linux Libertine O} ? I can't find Linux Libertine O. Searching for otf- by aptitude gives as result: maria@maria-laptop:/etc/fonts$ aptitude search otf p emdebian-rootfs - emdebian root filesystem support p libotf-bin - A Library for handling OpenType Font - utilities p libotf-dev - A Library for handling OpenType Font - development i libotf0 - A Library for handling OpenType Font - runtime p libotf0-dbg - The libotf libraries and debugging symbols p libpam-dotfile - A PAM module which allows users to have more than one password p livecd-rootfs - construction script for the livecd rootfs p makebootfat - Utility to create a bootable FAT filesystem p otf-ipaexfont - Japanese OpenType font, IPAexFont (IPAexGothic/Mincho) p otf-ipaexfont-gothic - Japanese OpenType font, IPAexFont (IPAexGothic) p otf-ipaexfont-mincho - Japanese OpenType font, IPAexFont (IPAexMincho) p otf-ipafont - Japanese OpenType font set, IPAfont p otf-ipafont-gothic - Japanese OpenType font set, IPA Gothic font p otf-ipafont-mincho - Japanese OpenType font set, IPA Mincho font p otf-stix - the Scientific and Technical Information eXchange fonts p otf-thai-tlwg - Thai fonts in OpenType format p otf-yozvox-yozfont - Japanese proportional Handwriting OpenType font p otf2bdf - generate BDF bitmap fonts from OpenType outline fonts p robotfindskitten - Zen Simulation of robot finding kitten So font in question is not just uninstalled, but not available, if I'm not wrong. Does it mean that I lack some repositoires? I was trying also to apply solution from the thread How do I reinstall default fonts?, but the result is: maria@maria-laptop:~$ sudo apt-get install msttcorefonts [sudo] password for maria: Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting ttf-mscorefonts-installer instead of msttcorefonts ttf-mscorefonts-installer is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. maria@maria-laptop:~$ It seems that is not a usual problem for use of XeLaTeX; nobody in the mentioned thread suggested instalation of anything else than TeX Live. Thanks in advance

  Read the article

• sencha dataitem datamap setItems

  - by user1795667

  I'm trying to follow the kitten example given here http://www.sencha.com/blog/dive-into-dataview-with-sencha-touch-2-beta-2#comment_form and I have complex components in which one of the property of my data is a list of objects. And I do find a method for setting a list of objects which is setItems however it does not seem to work. My object array is my model MyApp.Model.Sponsor. Could anyone suggest what I'm missing to get this working? Ext.define('MyListItem', { extend: 'Ext.dataview.component.DataItem', requires: ['Ext.Button','Ext.Img', 'MyApp.model.Sponsors', 'MyApp.model.Sponsor'], xtype: 'mylistitem', config: { sponsor: true, dataMap: { getSponsor: { setItems: 'sponsor' } } }, applySponsor: function(config) { // I put an alert here to see if I get getSponsor() but the object I get here is undefined alert(this.getSponsor()); return Ext.factory(config, MyApp.model.Sponsor, this.getSponsor()); }, updateSponsor: function(newNameButton, oldNameButton) { if (oldNameButton) { this.remove(oldNameButton); } if (newNameButton) { this.add(newNameButton); } }, onSponsorTap: function(button, e) { var sponsors = record.get('sponsor'); //my specific action } }); Ext.define('MyApp.model.Sponsors', { extend: 'Ext.data.Model', xtype:'Sponsors_m', config: { fields: [ {name: 'level', type: 'auto'}, {name: 'id', type: 'int'}, {name: 'sponsor', type: 'Sponsor'} ] } }); Ext.define('MyApp.model.Sponsor', { extend: 'Ext.data.Model', xtype:'Sponsor_m', config: { fields: [ {name: 'name', type: 'auto'}, {name: 'image', type: 'auto'}, {name: 'url', type: 'auto'}, {name: 'description', type: 'auto'} ] } });

  Read the article

• Installing MySQL on Ubuntu 12 fails on a clean installation

  - by Keenora Fluffball

  I do have the problem, that even if I uninstall mysql completely and do a restart, it still doesn't install mysql. This is the error I get: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Statusinformationen werden eingelesen... Fertig Die folgenden zusätzlichen Pakete werden installiert: libdbd-mysql-perl libmysqlclient18 mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server-5.5 mysql-server-core-5.5 Vorgeschlagene Pakete: tinyca mailx Die folgenden NEUEN Pakete werden installiert: libdbd-mysql-perl libmysqlclient18 mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server mysql-server-5.5 mysql-server-core-5.5 0 aktualisiert, 8 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 26,2 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 94,2 MB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren [J/n]? J Hole:1 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-common all 5.5.28-0ubuntu0.12.10.1 [13,4 kB] Hole:2 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main libmysqlclient18 amd64 5.5.28-0ubuntu0.12.10.1 [949 kB] Hole:3 http://de.archive.ubuntu.com/ubuntu/ quantal/main libdbd-mysql-perl amd64 4.021-1 [97,7 kB] Hole:4 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-client-core-5.5 amd64 5.5.28-0ubuntu0.12.10.1 [1.941 kB] Hole:5 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-client-5.5 amd64 5.5.28-0ubuntu0.12.10.1 [8.332 kB] Hole:6 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-server-core-5.5 amd64 5.5.28-0ubuntu0.12.10.1 [5.983 kB] Hole:7 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-server-5.5 amd64 5.5.28-0ubuntu0.12.10.1 [8.842 kB] Hole:8 http://de.archive.ubuntu.com/ubuntu/ quantal-updates/main mysql-server all 5.5.28-0ubuntu0.12.10.1 [11,6 kB] Es wurden 26,2 MB in 1 min 5 s geholt (399 kB/s) Vorkonfiguration der Pakete ... Vormals nicht ausgewähltes Paket mysql-common wird gewählt. (Lese Datenbank ... 68073 Dateien und Verzeichnisse sind derzeit installiert.) Entpacken von mysql-common (aus .../mysql-common_5.5.28-0ubuntu0.12.10.1_all.deb) ... Vormals nicht ausgewähltes Paket libmysqlclient18:amd64 wird gewählt. Entpacken von libmysqlclient18:amd64 (aus .../libmysqlclient18_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Vormals nicht ausgewähltes Paket libdbd-mysql-perl wird gewählt. Entpacken von libdbd-mysql-perl (aus .../libdbd-mysql-perl_4.021-1_amd64.deb) ... Vormals nicht ausgewähltes Paket mysql-client-core-5.5 wird gewählt. Entpacken von mysql-client-core-5.5 (aus .../mysql-client-core-5.5_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Vormals nicht ausgewähltes Paket mysql-client-5.5 wird gewählt. Entpacken von mysql-client-5.5 (aus .../mysql-client-5.5_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Vormals nicht ausgewähltes Paket mysql-server-core-5.5 wird gewählt. Entpacken von mysql-server-core-5.5 (aus .../mysql-server-core-5.5_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Trigger für man-db werden verarbeitet ... mysql-common (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... Vormals nicht ausgewähltes Paket mysql-server-5.5 wird gewählt. (Lese Datenbank ... 68251 Dateien und Verzeichnisse sind derzeit installiert.) Entpacken von mysql-server-5.5 (aus .../mysql-server-5.5_5.5.28-0ubuntu0.12.10.1_amd64.deb) ... Vormals nicht ausgewähltes Paket mysql-server wird gewählt. Entpacken von mysql-server (aus .../mysql-server_5.5.28-0ubuntu0.12.10.1_all.deb) ... Trigger für man-db werden verarbeitet ... Trigger für ureadahead werden verarbeitet ... libmysqlclient18:amd64 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... libdbd-mysql-perl (4.021-1) wird eingerichtet ... mysql-client-core-5.5 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... mysql-client-5.5 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... mysql-server-core-5.5 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... mysql-server-5.5 (5.5.28-0ubuntu0.12.10.1) wird eingerichtet ... AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld in /etc/apparmor.d/usr.sbin.mysqld at line 9: >>abstractions/mysql<< konnte nicht ge?ffnet werden start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: Fehler beim Bearbeiten von mysql-server-5.5 (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück dpkg: Abhängigkeitsprobleme verhindern Konfiguration von mysql-server: mysql-server hängt ab von mysql-server-5.5; aber: Paket mysql-server-5.5 ist noch nicht konfiguriert. dpkg: Fehler beim Bearbeiten von mysql-server (--configure): Abhängigkeitsprobleme - verbleibt unkonfiguriert Trigger für libc-bin werden verarbeitet ... ldconfig deferred processing now taking place Es wurde kein Apport-Bericht verfasst, da die Fehlermeldung darauf hindeutet, dass dies lediglich ein Folgefehler eines vorherigen Problems ist. Fehler traten auf beim Bearbeiten von: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) Do you have any clue, whats going on here?

  Read the article

• migration from jboss4.0.5GA to jboss5.1.0 GA

  - by rahul c

  Hi, Currently we have migrated from jboss4.0.5GA to jboss5.1.0 GA.Our application runs under jboss4.0.5GA well.The reason for migration to enable web service. I cann't find a way to create a web service on jboss 4.0.5 GA. while running on jboss 5.1.0 GA with jbossws-cxf-3.2.1.GA installed on it. i got following error 18:53:43,699 INFO [STDOUT] 2009-11-30 18:53:43,699 INFO org.springframework.core.CollectionFactory - JDK 1.4+ collections available 18:53:43,700 INFO [STDOUT] 2009-11-30 18:53:43,700 INFO org.springframework.core.CollectionFactory - Commons Collections 3.x available 18:53:43,973 INFO [STDOUT] 2009-11-30 18:53:43,972 INFO org.springframework.beans.factory.xml.XmlBeanDefinitionReader - Loading XML bean definitions from ServletContext resource [/WEB-INF/applicationContext.xml] 18:53:44,308 INFO [STDOUT] 2009-11-30 18:53:44,302 ERROR org.springframework.web.context.ContextLoader - Context initialization failed org.springframework.beans.factory.BeanDefinitionStoreException: Unexpected exception parsing XML document from ServletContext resource [/WEB-INF/applicationContext.xml]; nested exception is java.lang.IllegalArgumentException: Class [org.apache.cxf.transport.http_jetty.spring.NamespaceHandler] does not implement the NamespaceHandler interface Caused by: java.lang.IllegalArgumentException: Class [org.apache.cxf.transport.http_jetty.spring.NamespaceHandler] does not implement the NamespaceHandler interface at org.springframework.beans.factory.xml.DefaultNamespaceHandlerResolver.initHandlerMappings(DefaultNamespaceHandlerResolver.java:119) at org.springframework.beans.factory.xml.DefaultNamespaceHandlerResolver.(DefaultNamespaceHandlerResolver.java:96) at org.springframework.beans.factory.xml.DefaultNamespaceHandlerResolver.(DefaultNamespaceHandlerResolver.java:82) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.createDefaultNamespaceHandlerResolver(XmlBeanDefinitionReader.java:526) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.createReaderContext(XmlBeanDefinitionReader.java:515) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.registerBeanDefinitions(XmlBeanDefinitionReader.java:495) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:390) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:340) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:317) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:125) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:141) at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:123) at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:91) at org.springframework.context.support.AbstractRefreshableApplicationContext.refreshBeanFactory(AbstractRefreshableApplicationContext.java:94) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:292) at org.springframework.web.context.support.AbstractRefreshableWebApplicationContext.refresh(AbstractRefreshableWebApplicationContext.java:156) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:246) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:184) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:49) at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3910) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4393) at org.jboss.web.tomcat.service.deployers.TomcatDeployment.performDeployInternal(TomcatDeployment.java:310) at org.jboss.web.tomcat.service.deployers.TomcatDeployment.performDeploy(TomcatDeployment.java:142) at org.jboss.web.deployers.AbstractWarDeployment.start(AbstractWarDeployment.java:461) at org.jboss.web.deployers.WebModule.startModule(WebModule.java:118) at org.jboss.web.deployers.WebModule.start(WebModule.java:97) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:157) at org.jboss.mx.server.Invocation.dispatch(Invocation.java:96) at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264) at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:668) at org.jboss.system.microcontainer.ServiceProxy.invoke(ServiceProxy.java:206) at $Proxy38.start(Unknown Source) at org.jboss.system.microcontainer.StartStopLifecycleAction.installAction(StartStopLifecycleAction.java:42) at org.jboss.system.microcontainer.StartStopLifecycleAction.installAction(StartStopLifecycleAction.java:37) at org.jboss.dependency.plugins.action.SimpleControllerContextAction.simpleInstallAction(SimpleControllerContextAction.java:62) at org.jboss.dependency.plugins.action.AccessControllerContextAction.install(AccessControllerContextAction.java:71) at org.jboss.dependency.plugins.AbstractControllerContextActions.install(AbstractControllerContextActions.java:51) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:348) at org.jboss.system.microcontainer.ServiceControllerContext.install(ServiceControllerContext.java:286) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:1631) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:934) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1082) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:984) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:822) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:553) at org.jboss.system.ServiceController.doChange(ServiceController.java:688) at org.jboss.system.ServiceController.start(ServiceController.java:460) at org.jboss.system.deployers.ServiceDeployer.start(ServiceDeployer.java:163) at org.jboss.system.deployers.ServiceDeployer.deploy(ServiceDeployer.java:99) at org.jboss.system.deployers.ServiceDeployer.deploy(ServiceDeployer.java:46) at org.jboss.deployers.spi.deployer.helpers.AbstractSimpleRealDeployer.internalDeploy(AbstractSimpleRealDeployer.java:62) at org.jboss.deployers.spi.deployer.helpers.AbstractRealDeployer.deploy(AbstractRealDeployer.java:50) at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(DeployerWrapper.java:171) at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(DeployersImpl.java:1439) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1157) at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1178) at org.jboss.deployers.plugins.deployers.DeployersImpl.install(DeployersImpl.java:1098) at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:348) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:1631) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:934) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1082) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:984) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:822) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:553) at org.jboss.deployers.plugins.deployers.DeployersImpl.process(DeployersImpl.java:781) at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeployerImpl.java:702) at org.jboss.system.server.profileservice.repository.MainDeployerAdapter.process(MainDeployerAdapter.java:117) at org.jboss.system.server.profileservice.repository.ProfileDeployAction.install(ProfileDeployAction.java:70) at org.jboss.system.server.profileservice.repository.AbstractProfileAction.install(AbstractProfileAction.java:53) at org.jboss.system.server.profileservice.repository.AbstractProfileService.install(AbstractProfileService.java:361) at org.jboss.dependency.plugins.AbstractControllerContext. 18:53:44,313 INFO [STDOUT] install(AbstractControllerContext.java:348) at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:1631) at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:934) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1082) at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:984) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:822) at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:553) at org.jboss.system.server.profileservice.repository.AbstractProfileService.activateProfile(AbstractProfileService.java:306) at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootstrap.java:271) at org.jboss.bootstrap.AbstractServerImpl.start(AbstractServerImpl.java:461) at org.jboss.Main.boot(Main.java:221) at org.jboss.Main$1.run(Main.java:556) at java.lang.Thread.run(Thread.java:619) 18:53:44,315 ERROR [[/smartLMS]] Exception sending context initialized event to listener instance of class org.springframework.web.context.ContextLoaderListener org.springframework.beans.factory.BeanDefinitionStoreException: Unexpected exception parsing XML document from ServletContext resource [/WEB-INF/applicationContext.xml]; nested exception is java.lang.IllegalArgumentException: Class [org.apache.cxf.transport.http_jetty.spring.NamespaceHandler] does not implement the NamespaceHandler interface Caused by: java.lang.IllegalArgumentException: Class [org.apache.cxf.transport.http_jetty.spring.NamespaceHandler] does not implement the NamespaceHandler interface at org.springframework.beans.factory.xml.DefaultNamespaceHandlerResolver.initHandlerMappings(DefaultNamespaceHandlerResolver.java:119) at org.springframework.beans.factory.xml.DefaultNamespaceHandlerResolver.(DefaultNamespaceHandlerResolver.java:96) at org.springframework.beans.factory.xml.DefaultNamespaceHandlerResolver.(DefaultNamespaceHandlerResolver.java:82) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.createDefaultNamespaceHandlerResolver(XmlBeanDefinitionReader.java:526) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.createReaderContext(XmlBeanDefinitionReader.java:515) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.registerBeanDefinitions(XmlBeanDefinitionReader.java:495) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:390) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:340) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:317) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:125) at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:141) at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:123) Thanks, Rahul.

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25  | Next Page >