Search Results

Search found 10859 results on 435 pages for 'raid controller'.

Page 19/435 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • How do i Change a Dammage Disk in a Raid 5

    - by Egakagoc2xI
    Hi, I have a 4 drives Raid 5 Server, which one of them is dammage, all drivers are hot plugged. My Question is, I Want to replace the dammage with a new one, Do I have to shutdown the server or just change the hard drives with the server on a it'll rebuild the every or there is a procedure to follow? My Server is a HP. Regards.

    Read the article

  • "Raid 0 SAS" versus "2nd generation SSD"

    - by Stefano
    Hi everybody, i was planning to buy a SAS system made of two 15k RPM disks in Raid 0 configuration to give a boost to my s.o. and my apps... but after i saw that article on Coding Horror, i've started to thinking if a new 2nd generation SSD could do the same job, or even better... Does anybody have any information to help me decide?

    Read the article

  • How do I Change a damaged Disk in a Raid 5 array

    - by Egakagoc2xI
    Hi, I have a server with a 4-drives Raid 5 array; one of the disks is damaged. All the disks are hot pluggable. My Question is, I want to replace the damaged disk with a new one, do I have to shutdown the server or should I just change the hard disk with the server on and it will rebuild the array? There is a procedure to follow? My Server is a HP. Regards.

    Read the article

  • Ubuntu server boot degraded raid

    - by beacon_bonanza
    I've installed Ubuntu 12.04.1 in a new server and set up the 4 hard drives with 3 RAID 1 devices, the configuration is such that the first two drives have md0 (swap space) and md1 (/) with the third and fourth drives having md2 (/var). I've been testing the operation under a drive failure and found that the system boots fine if I remove disk two but if I remove disk one then the system gets to grub and then just restarts. I'm confused as to why grub appears to be loading properly from disk two but then the boot fails.

    Read the article

  • Primary domain controller has crashed, secondary does not log in

    - by Hosm
    Hi everybody, I had a primary domain controller on machine A and a secondary one on machine B in my AD domain. Due to some hardware/software problems, I decided to migrate the role of primary domain controller to machine B. Unfortunately, machine A has totally crashed and does not boot. Now I can not even log in to machine B (which itself was a controller in the domain). I need to log into machine B then choose it as the primary controller. I already have synced DNS and AD info. when machine A was alive. Anyone can provide an idea?

    Read the article

  • Cannot ping my domain-joined server - Can only ping domain controller - host unreachable

    - by Vazgen
    I have a HyperV Server hosting a Domain Controller VM (192.168.1.50) and another VM (192.168.1.51) joined to this domain. I have: domain controller as DNS server forward lookup zone for the domain with host record for 192.168.1.50 and 192.168.1.51 Windows client has primary DNS server set to 192.168.1.50 and secondary to my ISP I can ping 192.168.1.50 (domain controller) successfully but cannot ping 192.168.1.51 (domain-joined VM) When pinging from Windows client: ping 192.168.1.51 Reply from 192.168.1.129 : Destination host unreachable When pinging from Domain Controller: ping 192.168.1.51 Reply from 192.168.1.50 : Destination host unreachable I have 2 virtual network adapters one PRIVATE for intranet (set to static IP 192.168.1.51) and one PUBLIC for internet with a dynamic IP. I noticed the the PUBLIC one inherited the "mydomain.com" domain subtitle after joining the domain... I don't know what this meant but it seemed more intuitive to me to switch THIS ONE to have the static IP. After I configured that I still could not ping but now I get: ping 192.168.1.51 Request timed out What seems to be the issue, I'm relatively new to networking.

    Read the article

  • Using Xbox 360 controller with Mac OS X (specifically turning it off)

    - by Bob King
    So I've been using this driver for a few months with the Xbox 360 Wireless Controller For Windows with my Mac Mini. Here's an article about the driver on Gizmodo. The driver works really well for actually using the controller, but there doesn't seem to be a way to power off the controller without pulling the batteries. Does anyone know of a replacement driver that includes power-off capabilities, or know of some other undocumented way to turn the controller off? Note: I've been having problems getting to the site, but it could be our corporate filtering.

    Read the article

  • PC does not recognize XBox 360 controller connected through Play & Charge Kit

    - by Mike Cole
    I wanted to hook up my wireless XBox 360 controller to my PC running windows 7. I'm trying to use the Play & Charge kit since I already had that laying around. I plugged it in and Windows recognize it and installed it. It registers in Device Manager as "Xbox 360 Wireless Controller via Play & Charge Kit". The controller also has the 1st quadrant lit. However, I can't seem to make this work with any games. I installed the "Microsoft Xbox 360 Accessories" kit from MS website, and I run the Accessories Status app and it doesn't recognize that the controller is connected. Does anybody know what I'm doing wrong out there?

    Read the article

  • I have a 21TB array but only 16TB is visible from Windows

    - by Relentim
    CONTROLLER Raid Controller: 3Ware 9650SE-24M8 Disks: 21 x 1TB RAID5 Stripe 64KB WINDOWS OS: Windows Server 2003 SP2 32x Disk: Dynamic 19557.44GB Volume: Capacity 15832.19GB I guess my array must have a 4KB block size which is limiting it to 16TB. I think I would have to switch to a 64KB block size to be able to see a maximum of 256TB. Or create another unit on my controller to go above 16TB of storage. Unfortunately I have already added over 16TB, ideally I would like to shrink the array and reclaim the 5 disks that aren't doing anything. I don't think this is possible. More likely, can I change the block size so 20TB becomes visible in windows?

    Read the article

  • How do I install BCM4312 wireless drivers?

    - by t3ch
    completely new to Ubuntu. How do I add Wireless driver for my laptop? I am running a Dell XPS M1330. Right now its acts as if I dont have a Wi-Fi card. :~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

    Read the article

  • cannot boot ubuntu 13.10 with my usb, Can i change the kernal on my laptop to run it?

    - by Carlos Dunick
    Currently i am running 12.04 and looking for an upgrade to 13.10 I first tried a bootable 64bit usb and failed. With the message saying "Kernal requires an x86-64 CPU but only detected an I686 CPU Unable to boot please use a kernal appropriate for your CPU" then tried 32bit and same message came up. Is this due to my laptop simply being to slow? or can/should i change the kernal somehow? Acer Aspire 5710z Intel Pentium dual core processor, 1.73Ghz, 533 MHz FSB, 1 MB L2 cache. 2GB DDR2 lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) 04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 06:00.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller 06:00.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller 06:00.2 FLASH memory: ENE Technology Inc Memory Stick Card Reader Controller 06:00.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller

    Read the article

  • RAID and Partitions, guidance Needed

    - by beauregarde
    Alright I have a Biostar TA790GX3A2+ Mobo 2x Seagate 750Gb Hard drive (with 2 different speeds) an X4 9750 A GeForce 9800GT and 2GB RAM Hardware Specs link text I want to configure my computer with partitions in various RAID arrays. The Partitions I know i want (disk letters are mostly for reference here) C: XP Boot D: XP Swap E: XP Run F: Games G: Data The Partitions I think I want (repeat caveat) H: small FAT for Win Legacy and DOS I: Linux J: Linux Swap K-?M?: Other Linux /whatever partitions N & O: Attic for D1 and D2 What I'd like to do, is have C: written on Disk 1 (D1),.. D: on D2,.. E: and F: striped on D1 & D2,.. G: mirrored or D1 & D2,.. I: on D2 (so i can just switch disc boot priority to open in Ubuntu),.. J: on D1,.. and H: somewhere low on D1 I am inexperienced with VMs, so i am unsure as to whether those run out of XP, or whether i need to reserve a primary partition for them. However, I think they would be preferable for testing new OS's to scheduling a partition for the same purpose. I'm also not married to XP, but -64 IS pretty important to me. QUestion Time 1) Ignoring the irrationality of it all, is such a configuration possible? If not, can some pseudo-approximation be achieved? 2) My RAID is software, isnt it? 3) How much should I short a 750GB HD? And should i use that space for my attics, or for my attics and something else, or for something else (.iso's perhaps?)? 4) if XP is striped on D1 & D2, will that interfere egregiously with my Swap writes on D2? If so, would striping both XP and Swap relieve (or at least mitigate) that issue? Should XP and Swap just be written normally on 2 different HDs? 5) Should I keep DL's and Drivers on E: (XP Run), F: (Games), or elsewhere? 6) Is 4GB enough for C:? 7) Is 30GB enough (or too much) for E:? 8) How much to reserve for the Linux and sub-Linux partitions? Also, where on the platter do you think i should put them? 9) Am I a fool to use FAT16 instead of FAT32 for H: because I'd rather run 95 than 98SE? If not, do you think 2GB or 4GB? 10) I cant predict what my Max Commit Charge will be, so recommendations for Pagefile size? 5GB? 12GB? 11) VMs, where do I run them? do they exacerbate anything? Would it be better to just emulate Linux, 95, and DOS? EC) What havent I considered that I really should? Notes: computer is mostly for playing games and watching media, though I wouldnt rule out the use of particularly blah-intensive anything.

    Read the article

  • choosing the right RAID level

    - by student
    Recently, we bought a "HP-DL380 G6 Server" with 6 146GB (SCSI)HDD for our colleague course management application and website with 10000 daily visitors. we want to choose the best RAID level. how can we choose the right RAID level ? what is the best RAID level for our application ?

    Read the article

  • Desktop PC Raid 5 or JBOD?

    - by Sean Lim
    I have a desktop PC and I want to get alot of space for movies, music, and pictures. I probably will not be deleting files. I am running Windows 7 on my system. It is kind of silly I just want the physical drives to be labeled as a single letter drive. And probably map my video, documents, pictures and music on that single drive. The main reason I considered RAID 5 because I would be lazy to get the data I lost and hopefully that if I get a new drive, it would rebuild it. So my question is which would be better? A second question is can I get RAID card that has only 2 internal connectors and still do RAID 5? or do I have to get a RAID card that has 4 internal connectors.

    Read the article

  • growing EBS RAID volume

    - by Ryan Fernandes
    I've created a RAID0 configuration with two 1GB EBS volumes, mounted at /dev/md0 using mdadm and formatted with XFS Next, I copied some files over to fill the volume to around 30% of its capacity (of 2GB) I then created snapshots of the volumes using ec2-consistent-snapshot and created volumes of the said snapshots but specified the volume size to be 2GB (effective doubling the capacity on each disk) I then spun up a new instance, assembled the RAID0 configuration on /dev/md0 from the 2 volumes mentioned above and mount it to /vol df -hT showed /vol as 2GB (as expected) Now I ran sudo xfs_growfs -d /vol. The command completed normally but reported blocks changed from 523776 to 524160 (only!) and df -hT still showed /vol as 2GB (instead of the expected 4GB) I rebooted, remounted, reassembled the RAID but it still reports the old size. Any clue as to what went wrong?

    Read the article

  • 3ware RAID in Windows 7

    - by scribbles
    Just moved a 3ware 9500S-8 raid card and a few drives from my linux box into my win7 box. Windows Updates picked up the 3ware driver and installed it. After a reboot I checked Disk Management and it shows the array as one solid drive with the correct size. The only issue is that its not assigned a drive letter and when I right click on it my only option is to Convert to Dynamic Disk... From what I've read this is not something I want to do. What are my options?

    Read the article

  • Installing raid controller forces reinstall of Windows Server 2008

    - by Tyler
    So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

    Read the article

  • no volume in kubuntu 10.04

    - by neha
    hello,I am having both gnome and kde on my system.as my gnome is working perfectly but in KDE is there is no sound being generated. output of apley -l and lspci commands is as follows.. neha@neha-laptop:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: INTEL HDMI [INTEL HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 and output of lspci command is: neha@neha-laptop:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 02:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12) 02:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 02:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12) 0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01) can anyone help me??

    Read the article

  • RAID Array performance on an HP Proliant ML350 G5 Smart Array E200i

    - by Nate Pinchot
    We have a client who is complaining about performance of an application which utilizes an MS SQL database. They do not believe the performance issues are the fault of the application itself. The Smart Array E200i RAID controller has 128MB cache and we have the cache set to 75% read/25% write. The disk array set to enable write caching. Recently we ran a disk performance test using SQLIO based on this guide. We used a 10 GB file for the test found that the average sequential read rate was ~60 MB/sec (megabytes/sec) and the average random read rate was ~30 MB/sec. Are these numbers on par for what the server should be performing? Better than on par? Horrible? Amazing?

    Read the article

  • How to set up RAID 1 on Dell PERC S300 With Existing OS Install

    - by Daniel Dugger
    We have a server that is being used in production, but it was not originally meant to. The main thing I want to add to it is a Dell PERC S300 RAID Card to have the main hard drive (Windows Server 2008 R2) mirrored on another hard drive. I can not initialize the disk and wipe the the OS to create the array and then re-install. Is there a way to create the array with a current hard drive, without affecting it, and just mirroring the drive? If that card is not an option, is there a card that would allow that? The server is a Dell PowerEdge T110 II.

    Read the article

  • 3ware RAID in Windows 7

    - by user36484
    Just moved a 3ware 9500S-8 raid card and a few drives from my linux box into my win7 box. Windows Updates picked up the 3ware driver and installed it. After a reboot I checked Disk Management and it shows the array as one solid drive with the correct size. The only issue is that its not assigned a drive letter and when I right click on it my only option is to Convert to Dynamic Disk... From what I've read this is not something I want to do. What are my options?

    Read the article

  • Raid 5 GPT Partitioning

    - by user39325
    Hi, i have a Dell Poweredge r710 server with five 1 TB disks. All of them are in RAID 5. I was trying to install Centos but it sais "Your boot partition is on disk using GPT Partition...". I read somewhere that centos cant install on 2TB disk, so i made some partiotions smaller, but it's not workin. any idea? p.s. i am going to install Proxmox on that, but Proxmox same doesnt accept 2TB disks...

    Read the article

  • RAID-0 problem with a Sony sporting a new HDD

    - by redrock
    Sony Windows 7 PC. Originally had 2 x 300 Gb HDD. One HDD completely pancaked so have replaced with a new 500 Gb HDD. When both drives are connected the 300GB doesn't appear to be recognized as a 300Gb HDD as a separate entity. BIOS sees it but the operating system only sees a total of 465GB of HD space. When both disks are attached under disk management it shows one 465Gb as RAID 0 and the new drive as STxxxxxx 465Gb. My question I guess is what should I see in total HDD space and is this configured correctly as I thought I would see 2 separate drives 1x500Gb and 1x300Gb. My customer insisted that prior to the HDD crash he saw 2 drives both registering as 300Gb (a c: and d: drive).

    Read the article

  • Which software raid modes does each version of Windows 7 support?

    - by Goyuix
    Being familiar with the software raid modes and dynamic disks from the server versions, I was wondering if there is a document or even just common crowd knowledge that indicated what software raid support was available for each version of Windows 7. Also - all the various raid levels supported for booting or just a data recovery mechanism (e.g. you can connect three RAID-5 dynamic disks to an already booted system). I would prefer to stay away from modified/copied DLL's from the server variants, as well - please note - this is Windows software RAID - not fake-raid from your BIOS or an add-on card.

    Read the article

  • Intel RST accidentally selected wrong drive as system drive -- how to fix?

    - by Sean Killeen
    Question / TL;DR If Intel RST has marked a drive other than my RAID set as the system drive, how can I get it so that the RAID set is now seen as the system drive, and catch it up to my drive now? What Happened NOTE: Some perhaps unwise decisions are ahead. This is as best as I can recall the order of things. I had a 2x1TB RAID1 config. I bought the drives around the same time, and they started to die around the same time. I replaced 1st drive with a 2 TB drive before the other one's SMART errors got more serious. I waited for the RAID to replicate, then replaced the 2nd drive with a manufacturer's replacement. I got a second manufacturer's drive replacement and used it as a spare. so I now I had a 1TB/2TB drive in a RAID1 and another 1TB as a spare. The 1TB drive in the replacement set was bad from the manufacturer. Rather than mess with their refurbished stuff, I bought another 2 TB drive an upped the config to a 2x2TB RAID1 with the other, functioning manufacturer's drive as a spare. I made the mistake of trying to bring the other drive online to clean it out and the signatue clash killed my machine. When the machine rebooted, that drive was marked as the system drive. So, I have a 2x2TB RAID1 that is apparently offline, and 1 spare 1 TB refurbished drive that everything is being run from. Not a great idea. Options I'm considering Bring the 2x2TB drive back online, and then unplug the spare until I can format it in another system. This would involve some data loss, but the more I think about it, I actually think I haven't modified any data that isn't backed up or synced somewhere (go me!) Anything that isn't is likely trivial, enough that I'm willing to take the risk. One downside here is that if the 2 TB doesn't have data on it for some reason, I could be screwed trying to put the other drive back in, no? Try to somehow get the RAID1 updated with the data from the current system drive. Option 3?

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >