Search Results

Search found 4620 results on 185 pages for 'serial over lan'.

Page 19/185 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• VMWare ESXi 3.5 Wake On Lan

  - by QAH

  Hello everyone! I am using VMWare ESXi 3.5 on my server, and I want to be able to remotely boot the server up. In the bios settings of the computer, I enabled Wake on Lan. I know usually with Windows XP and other Windows Operating Systems, you have to also enable wake on lan in the network card settings. Do I need to do this with ESXi, and if so, how? Thanks

  Read the article

• serial port close hangs in compact frame work 3.5

  - by ananda

  I have developed the application for windows mobile 5.0 and .net compact framework 2.0 sp2. This application communicates to the hardware device using serial port. This application works fine in windows mobile 5.0 based PDAs. I have handled data received event to get the data from serial port. But when I run my application on windows mobile 6.1 and .net compact framework 3.5, my application hangs on serial port close API call. There are many workarounds mentioned in the .net compact framework blog like (closing the com port on different thread, opening the port in the beginning of the application and close once application exists, polling for data instead of event handling), but nothing is working consistently.

  Read the article

• how do i release the auto increment serial nos that are missing

  - by mmdel

  i have a table with auto increment field and i am using transactions when inserting new data. now i find there are a few serial nos that are missing. suppose the last serial no was 475, now when i insert new row, the serial allotted to it is 481. how do i correct this. table_A fields ID(Auto increment),Name,Address table_B fields ID(Auto increment FK TO table_A ID),Tel,Fax,Email,Salesman table_C fields ID(Auto increment FK TO table_A ID),monthly_commitment mysql_query(BEGIN); $a = mysql_query("INSERT INTO table_A VALUES('','name','address')"); $b = mysql_query("INSERT INTO table_B VALUES('','tel','fax','email','salesman')"); $b = mysql_query("INSERT INTO table_C VALUES('','monthly commitment')"); if(($a) && ($b) && ($c)){mysql_query("COMMIT");} else {mysql_query("ROLLBACK");}

  Read the article

• Read Core data in Serial Queue for iPhone app

  - by user1277209

  I have an app which uses Core data and the values are fetched from a link on internet. This runs absolutely fine when I am creating a serial queue in AppDelegate and I am not facing any problem with the same. Now, when I am trying to re-create similar scenario in a UITableViewController and executing the same in a serial queue but when the control reaches NSError *error; NSArray *match = [context executeFetchRequest:fetchRequest error:&error]; execution control disappears and then this code remains in the execution till eternity. Can anyone help me with what exactly is wrong here? FYI, I am passing the same ManagedObjectContext to the serial queue.

  Read the article

• Artemis Is The Absolute Geekiest LAN Game You’ll Ever Play [Video]

  - by Jason Fitzpatrick

  Prepare to have your sense of what really geeky computer gaming look like with this Star Trek-like mockup that involves a projector, multiple monitors, and a crew of six. If you have five friends willing to pool some resources–because let us tell you, it’s not going to be cheap to build this gaming setup from scratch–you’re on your way to building a functional starship bridge in your rec room. You’ll need six computers and monitors, a projector to create the front-of-the-bridge-room effect, and a copy of the game–the full retail game is $40 but there is a free demo so you can take the starship simulation for a test spin. The base game is focused on simple simulations like defending your space station and fighting off waves of invaders, however, a recent update of the game supports user-created mission packs. The missions packs allow fans of the game to create intricate missions with objectives to expand the game much like fan-created RPG modules add game play value to table top role-playing games. Hit up the link below to read more about the game or just sit back and enjoy the entertaining video above of sci-fi bloggers manning a starship. Artemis HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For?

  Read the article

• Turn On Your PC/Computer Programmatically / Automatically –Wake On LAN ( WOL ) Over Internet- Wake O

  Start your Computer by C , C++ , JAVA , .NET ..

  Read the article

• VPN IP Routing - slow connections

  - by dannymcc

  UPDATE: Router error logs show: LCP Time-out 0 I'm not sure how to correct this. The Lan-to-Lan profiles are set to -1 Idle Timeout (for the remote branch). I have a PPTP VPN running between two Draytek 2820 routers. They are setup that one dials out to the other one. Main Practice - 192.168.1.0/24 Branch - 192.168.3.0/24 I have then set (on the Branch) router the following route: 192.168.1.0/24 If I then request a server running on 192.168.1.1 from the Branch, it correctly routes through VPN tunnel. If I request the branch server at 192.168.3.1 it correctly routes to the local server without using the VPN tunnel. I have temporarily disabled the firewall on both routers, and made sure that QoS is disabled. The Main Practice internet connection is ~30mb down / ~10mb up, and the Branch connection is ~5mb down / ~2mb up. Anything over the VPN tunnel runs pretty slowly (VNC, Remote Desktop and Terminal Emulators). However, if I dial using the Windows VPN wizard, creating a connection from the laptop to the Main Practice - everything runs quickly. I'm looking for possible causes, and/or ways of further diagnosing the issue. Any help would be greatly appreciated! UPDATE: In summary, when I connect within the Branch and try and access a host that's within the Main Practice it works, but slowly. If I then dial the VPN on my Windows 7 laptop whilst still connected to the Branch network, it's fast. Main Practice Branch Practice Routing Table from Branch Router Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 126.256.126.103 WAN2 C~ 192.168.1.99/ 255.255.255.255 directly connected VPN-1 S~ 192.168.1.0/ 255.255.255.0 via 192.168.1.99 VPN-1 S~ 192.168.2.0/ 255.255.255.0 via 192.168.1.99 VPN-1 C~ 192.168.3.0/ 255.255.255.0 directly connected LAN2 C 126.256.126.103/ 255.255.255.224 directly connected WAN2 Routing Table from Main Practice Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 81.139.64.1, WAN2 S 81.137.176.1/ 255.255.255.255 via 81.137.176.1, WAN2 * 81.139.64.1/ 255.255.255.255 via 81.139.64.1, WAN2 C~ 192.168.1.204/ 255.255.255.255 is directly connected, VPN C~ 192.168.1.0/ 255.255.255.0 is directly connected, LAN S~ 192.168.2.0/ 255.255.255.0 via 192.168.1.204, VPN S~ 192.168.3.0/ 255.255.255.0 via 192.168.1.203, VPN Connection Details (from Branch Router) Connection Details (from Main Practice Router) IPERF.exe Output

  Read the article

• How to use rhythmbox-client on LAN?

  - by Kaustubh P

  A few days ago I had asked this question, and according to one suggestion, used rhythmote. It is a web-interface to change songs on a rhythmbox playing on some PC. However, its not what I had thought of, and I stumbled upon documentation for rhythmbox-client. I tried a few ways of using it, but was unsuccessful. Let me show you a few ways of how I did it. The rhythmbox is running at address 192.168.1.4, lets call it jukebox. Passing the address as a parameter Hoping that I would be able to see and browse through songs on the jukebox rhythmbox-client 192.168.1.4 But, I get this message (rhythmbox-client:8370): Rhythmbox-WARNING **: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (rhythmbox-client:8370): Rhythmbox-WARNING **: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. SSH ssh -l jukebox 192.168.1.4 rhythmbox-client --print-playing Which spat this at me: (rhythmbox-client:9389): Rhythmbox-WARNING **: /bin/dbus-launch terminated abnormally with the following error: Autolaunch error: X11 initialization failed. rhythmbox-client as root gksudo rhythmbox-client 192.168.1.4 A rhythmbox client comes up, but with no music shown in the library. I am guessing this is running on my own computer. Can anyon tell me how rhythmbox-client is to be run, and is it even correct of me to think that I can get a rhythmbox window showing the songs on the jukebox? PS: There were a few other solutions mentioned, but I want to evaluate each and every one of them. Thanks.

  Read the article

• Redirect users to internal webpage on first visit

  - by Sihan Zheng

  I have a lan of maybe 20 - 30 computers, and a Windows server 2003 server on hand (I can also run any x86 Linux distro). What I am trying to do, is to redirect users to a webserver inside the LAN the first time they visit certain domains. For example, the first time a user visits "google.com", they will be redirected to 192.168.1.2 (a webserver, where they will be shown a custom webpage), attempts after that will go to google. Pretty much what I am trying to do, is to provide a captive server like service, showing people a custom webpage the first time they try to access certain websites (but not others). I'm pretty flexable on how this can be done, as long as it works. Can you guys give me an idea on how to approach this problem? I am looking for (hopefully) a free solutions. Thanks

  Read the article

• DrayTek Vigor 2920(n): VPN with VLAN restrictions?

  - by Dirk

  Hi, I'm currently installing a DrayTek Vigor 2920n router in a new office. This router is to be used for 2 seperate companies. For one of these companies, the router has a LAN-2-LAN (VPN) connection to a datacenter configured. The other company should not be able to access this other (VPN-)network. I'm aware of the capability of this router to have VLAN's, but I cannot figure out how to configure the VPN-connection to only be accessible for VLAN0 and not for VLAN1. I know I can also add another router to physically split both networks, but we bought the DrayTek with the idea that it could easily have the VPN-connection available for VLAN0 and not for VLAN1. VLAN1 can easily be in another subnet, that's fine, although, I don't know how to configure that on this DrayTek. Can anyone point me in the right direction? Thanks in advance, Dirk

  Read the article

• Remote Access Problems with DRAC 5 on Dell PowerEdge 1950

  - by Darin Peterson

  Today I received my first Dell PowerEdge 1950 server with a DRAC 5 card. On my local network I have static configurations on my Linux systems using this for instance: iface eth0 inet static address 192.168.1.210 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 8.8.8.8 8.8.4.4 For the DRAC card, I configured the LAN like this: address 192.168.1.215 netmask 255.255.255.0 gateway 192.168.1.1 For the advanced LAN settings I used dns-nameservers 8.8.8.8 8.8.4.4 I've tried many different IP addresses, but cannot communicate with the card. Is there anyone who might know if I have configuration issues, or maybe if the card might be bad?

  Read the article

• Computer disappeared from Workgroup

  - by Moayad Mardini

  I've a LAN that has 8 computers running Windows XP and only one (Computer A) running Windows Server 2003. When computer A boots, it shows up in all computers' Workgroups, but after 15-30 minutes, it disappears from the Workgroup in all computers, including itself. However, files can still be transferred from and to A via full path shortcuts and network drive maps still work. I don't know if this has anything to do with the problem or not, but if that particular computer is turned on while the LAN cable is plugged in, it doesn't connect to the network, but it connects if the cable is plugged in after the computer is run. Any tips why this is happening? Thanks.

  Read the article

• Windows 7 recognises the wrong router.

  - by Henry

  I have a cable router connected to my cable ISP. On the LANs are 4 computers, one of which is a dual boot XP/Win7 machine. I was given an ADSL wireless router which I connected to one of the LAN sockets on my cable router. I don't have an ADSL connection. All the machines connect correctly, some wirelessly, when my dual boot machine is in XP or off. However, when I go into Win 7 on that machine it finds the ADSL router and wants to connect through that (there's no ADSL connection) instead of my cable router and modem. I've turned DHCP off on the ADSL modem and even tried bridging its connections but neither of these have any effect. To get 7 connected, I have to either disconnect the ADSL router, or switch it off. Remember, the SAME computer on the same LAN works perfectly with the same router connected in XP! How then, can I get Win 7 to recognise the correct router?

  Read the article

• OpenVPN, Server 12.04, connect to machines in home LAN behind VPN server

  - by inexion

  Problem: I've set up a working OpenVPN server, and am able to connect to it from anywhere using my mac laptop and tunnelblick. When I connect in, I'm assigned an IP address of 10.8.0.x, the server is 10.8.0.1, so I have no problems SSHing into it. Once SSHd in, I can even ping other machines (obviously) on my home network (192.168.1.x). Desired outcome: What I want, is, to connect to the VPN server, and instead of getting a 10.8.0.x address, I get a 192.168.1.x on my home network. I can't figure out how to talk to the OTHER machines on my home network WITHOUT being SSHd in to the VPN server. I'd like to just connect to my VPN server, then be a part of my home network. Attempted solutions: I've read that I need to set up routes, and/or enable IP forwarding. I enabled IP forwarding using sudo sysctl -w net.ipv4.ip_forward=1 and that doesn't seem to have done anything. I've also uncommented a line in the OpenVPN's server.conf file: # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 192.168.1.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" But still no luck, I still get a 10.8.0.x address... I've also read I may have to add routes to the router itself, but haven't tried that. Any help appreciated, thanks!

  Read the article

• I would like to start multiple computers at once, What software do I use?

  - by Matt 'Trouble' Esse

  I have turned on Wake On Lan on all of the BIOSes in the PCs and I have a simple batch file that runs a free command wolcmd.exe Wake on Lan Command Line The syntax is as follows: wolcmd [mac address] [ip address] [subnet mask] [port number] The batch file looks a little like this.... wolcmd 009027a324fe 195.188.159.20 255.255.255.0 8900 wolcmd 009024a731da 212.86.64.31 255.255.255.0 8900 It's OK but It's not very user friendly (I need to set this up for other people to use and administer) Can you suggest a Windows (XP/Vixta/7) Alternative with a GUI? Free is cool, but a good paid for version is fine if you think it's worth it! Thanks in advance for your informed suggestions

  Read the article

• Access local email stored on worstation on laptop on lan

  - by crafter

  I have the following scenario with my email : I am using Evolution as my primary email client on my workstation. The evolution mail is downloaded from my mail servers using POP, then deleted from the server. When I am mobile, I access my email on my email server using webmail. My laptop is my primary computer thesedays. The workstation is hardly used. When I am mobile, I am restricted to new email that has not been downloaded onto the workstation I am now looking for a way to access my email from my workstation on my laptop, amlost as if my workstation is my second level email server/ I tried evolution on X display but attachments will browse on my workstation (not ideal as most docs are on my laptop). I am open to changing mail client or installing a service on my workstation. What would be the best way to address this requirement?

  Read the article

• Ubunti 12.10 wake on lan not working with Realtek 8139

  - by f.cipriani

  My pc doesn't wake up when receiving a magic packet from a pc connected to the same router. ethtool: fcipriani@ubuntu:~$ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes I have enabled all the wake up features in my bios, and I have verified the magic packet gets to the pc. I suspect the main problem is that the NIC light is completely turned off after the shutdown, but even after spending a lot of time researching I can't understand if this is a limit of my network card, my mobo, or something in the OS which needs to be configured correctly in order to leave the NIC in stand by mode with the light flashing. the NIC is Realtek 8139, the motherboard Asus P5L13L-X

  Read the article

• How to force-restart a PC with vPro technology?

  - by Dan Nissenbaum

  I would like to know how to force-restart a PC that has crashed/hung and become completely non-responsive, using 2nd-generation vPro technology. Assume there is a second, fully responsive PC on the same LAN that can be accessed remotely to assist. Specifically, I am considering purchasing a PC with an i7-2860QM CPU, which is vPro-enabled (according to Intel). Here are two links that indicate it should be possible to force-restart a hung system with a 2nd-generation vPro-enabled CPU: Seconds 24-39 of What Is Intel vPro™ Technology? Page 17 (21 of the PDF) of Intel® vPro™ Technology: Reference Guide However, after extensive research, I cannot find a straightforward and trustworthy source of confirmation that this will actually work as I describe, or any documentation about how to set it up. I would appreciate both a reliable confirmation, and a source of documentation. This question is a follow-up to: Wake-on-LAN (WOL) fails after computer crashes (Windows 7 64-bit).

  Read the article

• Search network device from LAN through my C++ application and change the IP address

  - by Arun Kumar K S

  I am developing an application in C++ to communicate with my network device. I used UDP classes to search the device from the network. I done the code in such a way that from my application a broadcast message will send to the local network. The device will respond to the broadcast message and the application will get the IP address from that response. After establishing a network communication send a message to the device for changing the IP address. That worked fine if my devices IP address is correct. But when I set a wrong IP address and subnet to the device. My application will never get any messages from the device. So I can't able communicate to the device and not able get the device and unable to change the IP address etc. Say example IP address of the device 20.1.1.1 Subnet Mask 255.0.0.0 And in my system that runs the application IP address 192.168.1.23 Subnet Mask 255.255.255.0 I tried the Lantronix device installation software with their Lantronix device in network. It listed the device from the network and I am able to change the IP address from their software. Any one know how this is done in this type of software? How I can search in network to find the device and change the IP address when its IP address is not in range? Which protocol they used to find the device?

  Read the article

• Cannot ping any computers on LAN

  - by Timothy

  I havem't been able to find a straight forward answer on this yet. I'm hoping people here are able to help! Keep in mind that I'm a complete beginner at this - this is the first installation i've done for any LINUX systems ever so please keep that in mind when answering this question. We are a complete Windows shop, using nothing but Microsoft products but looking into the value of OpenStalk however have been having problems getting Ubuntu Server installed and speaking to the network. The machine is getting an IP address which is telling me that some sort of DHCP activity is working but I'm not able to ping any computer on our network as well as not able to connect to the internet. Every time I try to ping i'm getting; Destination Host Unreachable I've tried using modifying the resolv.conf file with our static details to match my Windows 7 machine still with no luck. Even tried disabling the firewall on Ubuntu Server 11 and no luck. Any ideas? Please let me know if there is any information you need from the server and I'll post up.

  Read the article

• access VPN machine macosx same subnet

  - by matheszabi

  I would like to access the office machine, which has a fixed IP, and is available only in its local LAN. Let say 192.168.1.100. I have a VPN with username/password connection and I am trying to access the office machine from another location, i.e., another LAN, which has the same subnet: 192.168.1.50. I am using MacOSX 10.8. I have checked the "send all trafic over VPN connection, but I think it looks like it doesn't care and is searching in Local. I do not have admin privileges and can't request to make changes to the network settings in both LANs. Is there any way to connect to the desired remote machine?

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• Why does a redirect from a local IP address assume localhost?

  - by Jeremy

  I am developing a web application on my desktop and it is running on port 80. I am able to access the application from my laptop connected to the LAN by entering my desktop's LAN IP address 192.168.1.8. Now, my application sends a redirect after login, but my laptop assumes the final address is localhost/login. If I manually type in the IP address and URI for any page, it shows that I am logged in, so it works as expected. So, why does the redirect assume localhost? Both of my machines are linux-based. The laptop being Chrome OS. I am running nginx which proxies non-static file requests to jetty on port 8080.

  Read the article

• VM can't ping LAN name but sees it via nslookup

  - by amphibient

  I am trying to connect to a network resource from my 10.04.4 VM (VMware Fusion) but the destination is unreachable by name. What is weird is that the name is visible in DNS: >nslookup my.name Server: 123.45.67.89 Address: 123.45.67.89#53 Non-authoritative answer: Name: my.name Address: 10.20.30.40 I can reach it (via ping) by the IP address (10.20.30.40) but not the name and I thought that was weird because the DNS clearly resolves the name. What can I do to enable access to this resource via the name?

  Read the article

• Samba domain trust errors on a specific interface

  - by John K

  We have a windows domain that also has RHEL member servers in it. All the servers have a primary network connection to the LAN, but some servers also have private dedicated links to one of our RHEL servers, which serves as a head to our SAN storage. This particular server is running Samba 3.5.15, and is running in domain authentication mode. Users can access shares on this server without a problem over the LAN connection from our Windows servers, but if a user tries to access the shares over a private link (i.e. a 192.168.1.2 address to the RHEL server) users get an error "The trust relationship between this workstation and the primary domain failed."

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >