Search Results

Search found 881 results on 36 pages for 'verbose'.

Page 19/36 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• SQL SERVER – Fix : Error 3623 – An invalid floating point operation occurred

  - by pinaldave

  Going back in time, I always had a problem with mathematics. It was a great subject and I loved it a lot but I only mastered it after practices a lot. I learned that mathematics problems should be addressed systematically and being verbose is not a trick, I learned to solve any problem. Recently one of reader sent me an email with the title “Mathematics problem – please help!” and I was a bit scared. I was good at mathematics but not the best. When I opened the email I was relieved as it was Mathematics problem with SQL Server. My friend received following error while working with SQL Server. Msg 3623, Level 16, State 1, Line 1 An invalid floating point operation occurred. The reasons for the error is simply that invalid usage of the mathematical function is attempted. Let me give you a few examples of the same. SELECT SQRT(-5); SELECT ACOS(-3); SELECT LOG(-9); If you run any of the above functions they will give you an error related to invalid floating point. Honestly there is no workaround except passing the function appropriate values. SQRT of a negative number will give you result in real numbers which is not supported at this point of time as well LOG of a negative number is not possible (because logarithm is the inverse function of an exponential function and the exponential function is NEVER negative). When I send above reply to my friend he did understand that he was passing incorrect value to the function. As mentioned earlier the only way to fix this issue is finding incorrect value and avoid passing it to the function. Every mathematics function is different and there is not a single solution to identify erroneous value passed. If you are facing this error and not able to figure out the solution. Post a comment and I will do my best to figure out the solution. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• juju bootstrap fails with a local environment, why?

  - by Braiam

  Each time I try to bootstrap juju using a local enviroment it fails starting the juju-db-braiam-local script as follows: $ sudo juju --debug --verbose bootstrap 2013-10-20 02:28:53 INFO juju.provider.local environprovider.go:32 opening environment "local" 2013-10-20 02:28:53 DEBUG juju.provider.local environ.go:210 found "10.0.3.1" as address for "lxcbr0" 2013-10-20 02:28:53 DEBUG juju.provider.local environ.go:234 checking 10.0.3.1:8040 to see if machine agent running storage listener 2013-10-20 02:28:53 DEBUG juju.provider.local environ.go:237 nope, start some 2013-10-20 02:28:53 DEBUG juju.environs.tools storage.go:87 Uploading tools for [raring precise] 2013-10-20 02:28:53 DEBUG juju.environs.tools build.go:109 looking for: juju 2013-10-20 02:28:53 DEBUG juju.environs.tools build.go:150 checking: /usr/bin/jujud 2013-10-20 02:28:53 INFO juju.environs.tools build.go:156 found existing jujud 2013-10-20 02:28:53 INFO juju.environs.tools build.go:166 target: /tmp/juju-tools243949228/jujud 2013-10-20 02:28:53 DEBUG juju.environs.tools build.go:217 forcing version to 1.14.1.1 2013-10-20 02:28:53 DEBUG juju.environs.tools build.go:37 adding entry: &tar.Header{Name:"FORCE-VERSION", Mode:420, Uid:0, Gid:0, Size:8, ModTime:time.Time{sec:63517832933, nsec:278894120, loc:(*time.Location)(0x108fda0)}, Typeflag:0x30, Linkname:"", Uname:"ubuntu", Gname:"ubuntu", Devmajor:0, Devminor:0, AccessTime:time.Time{sec:63517832933, nsec:278894120, loc:(*time.Location)(0x108fda0)}, ChangeTime:time.Time{sec:63517832933, nsec:278894120, loc:(*time.Location)(0x108fda0)}} 2013-10-20 02:28:53 DEBUG juju.environs.tools build.go:37 adding entry: &tar.Header{Name:"jujud", Mode:493, Uid:0, Gid:0, Size:19179512, ModTime:time.Time{sec:63517832933, nsec:274894120, loc:(*time.Location)(0x108fda0)}, Typeflag:0x30, Linkname:"", Uname:"ubuntu", Gname:"ubuntu", Devmajor:0, Devminor:0, AccessTime:time.Time{sec:63517832933, nsec:274894120, loc:(*time.Location)(0x108fda0)}, ChangeTime:time.Time{sec:63517832933, nsec:274894120, loc:(*time.Location)(0x108fda0)}} 2013-10-20 02:28:55 INFO juju.environs.tools storage.go:106 built 1.14.1.1-raring-amd64 (4196kB) 2013-10-20 02:28:55 INFO juju.environs.tools storage.go:112 uploading 1.14.1.1-precise-amd64 2013-10-20 02:28:55 INFO juju.environs.tools storage.go:112 uploading 1.14.1.1-raring-amd64 2013-10-20 02:28:55 INFO juju.environs.tools tools.go:29 reading tools with major version 1 2013-10-20 02:28:55 INFO juju.environs.tools tools.go:34 filtering tools by version: 1.14.1.1 2013-10-20 02:28:55 INFO juju.environs.tools tools.go:37 filtering tools by series: precise 2013-10-20 02:28:55 DEBUG juju.environs.tools storage.go:41 reading v1.* tools 2013-10-20 02:28:55 DEBUG juju.environs.tools storage.go:61 found 1.14.1.1-precise-amd64 2013-10-20 02:28:55 DEBUG juju.environs.tools storage.go:61 found 1.14.1.1-raring-amd64 2013-10-20 02:28:55 INFO juju.environs.boostrap bootstrap.go:57 bootstrapping environment "local" 2013-10-20 02:28:55 INFO juju.environs.tools tools.go:29 reading tools with major version 1 2013-10-20 02:28:55 INFO juju.environs.tools tools.go:34 filtering tools by version: 1.14.1.1 2013-10-20 02:28:55 INFO juju.environs.tools tools.go:37 filtering tools by series: precise 2013-10-20 02:28:55 DEBUG juju.environs.tools storage.go:41 reading v1.* tools 2013-10-20 02:28:55 DEBUG juju.environs.tools storage.go:61 found 1.14.1.1-precise-amd64 2013-10-20 02:28:55 DEBUG juju.environs.tools storage.go:61 found 1.14.1.1-raring-amd64 2013-10-20 02:28:55 DEBUG juju.provider.local environ.go:395 create mongo journal dir: /home/braiam/.juju/local/db/journal 2013-10-20 02:28:55 DEBUG juju.provider.local environ.go:401 generate server cert 2013-10-20 02:28:55 INFO juju.provider.local environ.go:421 installing service juju-db-braiam-local to /etc/init 2013-10-20 02:28:56 ERROR juju.provider.local environ.go:423 could not install mongo service: exec ["start" "juju-db-braiam-local"]: exit status 1 (start: Job failed to start) 2013-10-20 02:28:56 ERROR juju supercommand.go:282 command failed: exec ["start" "juju-db-braiam-local"]: exit status 1 (start: Job failed to start) error: exec ["start" "juju-db-braiam-local"]: exit status 1 (start: Job failed to start) What is the reason for this error and how to solve it?

  Read the article

• Shutdown Hangs for 5 Minutes on Kubuntu 14.04

  - by Augustinus

  I've had persistent problems with a 5 minute hang at shutdown for the last three versions of Kubuntu (13.04, 13.10, and now 14.04). I suspect this is not a KDE-specific problem. Recently, I performed a fresh installation of Kubuntu 14.04 from a live-USB, and shutdown worked normally for about a week. The hang-up is now happening again, and I can't figure out why. A brief description of the problem: The hang-up occurs with all methods of initiating a normal shutdown: Clicking the shutdown or restart button in KDE, sudo shutdown -h now, sudo reboot The shutdown splash screen appears. Using the down-arrow to access verbose messages, I see "Asking all remaining processes to terminate." This message remains for 5 minutes with no disk activity. Finally, a rapid series of messages flurries to the screen: * All processes ended within 300 seconds... [ OK ] nm-dispatcher.action: Caught signal 15, shutting down... ModemManager[852]: <warn> Could not acquire the 'org.freedesktop.ModemManager1' service name ModemManager[852]: <info> ModemManager is shut down * Deactivating swap... [ OK ] * Unmounting local filesystems... [ OK ] * Will now restart` Possible Sources of the Problem: Before the problem re-appeared, I have mainly been doing routine computing. I have kept the system up-to-date using apt-get upgrade and apt-get dist-upgrade. The only other notable incident was a power failure. I do not have the computer connected to a UPS, so the power failure resulted in an immediate shutdown. Could this have corrupted an important file which must be accessed at shutdown? Is there any way that could cause a 5-minute hang-up? Here is a list of packages that have been updated before the problem appeared: bash iotop dpkg dpkg-dev python3-software-properties libdpkg-perl software-properties-kde software-properties-common akonadi-backend-mysql libakonadiprotocolinternals1 akonadi-server firefox-locale-en firefox flashplugin-installer libqapt2 libqapt2-runtime thunderbird openjdk-7-jre-headless thunderbird-locale-en kubuntu-driver-manager qapt-deb-installer openjdk-7-jre qapt-batch icedtea-7-jre-jamvm libelf1 dpkg dpkg-dev libdpkg-perl libjbig0 gettext-base libgettextpo-dev libssl1.0.0 libgettextpo0 libasprintf-dev linux-headers-3.13.0-24 gettext libasprintf0c2 linux-headers-3.13.0-24-generic openssl linux-libc-dev gstreamer0.10-qapt kubuntu-desktop linux-image-extra-3.13.0-24-generic linux-image-3.13.0-24-generic I would appreciate any help with this.

  Read the article

• The curious case of SOA Human tasks' automatic completion

  - by Kavitha Srinivasan

  A large south-Asian insurance industry customer using Oracle BPM and SOA ran into this. I have survived this ordeal previously myself but didnt think to blog it then. However, it seems like a good idea to share this knowledge with this reader community and so here goes.. Symptom: A human task (in a SOA/BPEL/BPM process) completes automatically while it should have been assigned to a proper user.There are no stack traces, no related exceptions in the logs. Why: The product is designed to treat human tasks that don't have assignees as one that is eligible for completion. And hence no warning/error messages are recorded in the logs. Usecase variant: A variant of this usecase, where an assignee doesnt exist in the repository is treated as a recoverable error. One can find this in the 'pending recovery' instances in EM and reactivate the task by changing the assignees in the bpm workspace as a process owner /administrator. But back to the usecase when tasks get completed automatically... When: This happens when the users/groups assigned to a task are 'empty' or null. This has been seen only on tasks whose assignees are derived from an assignment expression - ie at runtime an XPath is used to determine who to assign the task to. (This should not happen if task assignees are populated via swim-lane roles.) How to detect this in EM For instances that are auto-completed thus, one will notice in the Audit Trail of such instances, that the 'outcome' of the task is empty. The 'acquired by' element will also show as empty/null. Enabling the oracle.soa.services.workflow.* logger in em should print more verbose messages about this. How to fix this The application code needs two fixes: input to HT: The XSLT/XPath used  to set the task 'assignee' and the process itself should be enhanced to handle nulls better. For eg: if no-data-found, set assignees to alternate value, force default assignees etc. output from HT: Additionally, in the application code, check that the 'outcome' of the HT is not-null. If null, route the task to be performed again after setting the assignee correctly. Beginning PS4FP, one should be able to use 'grab' to route back to the task to fire again. Hope this helps. 

  Read the article

• gcc segmentation fault on Ubuntu 12.04

  - by Yuval F

  I am trying to compile a C program on Ubuntu precise 12.04. Here's the program: #include <stdio.h> int main(int argc, char** argv) { printf("Hello World!"); return 0; } My gcc version is 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5). Initially it did not find cc1 so I added a soft link. Now I get this message when I try to compile: gcc: internal compiler error: Segmentation fault (program cc1) Compiling the same program with g++ works fine. I tried reinstalling build-essential, but to no avail. What am I missing? EDIT: I tried reinstalling according to @gertyvdijk's suggestion. As it did not help, here is the output of apt-cache policy gcc-4.6: gcc-4.6: Installed: 4.6.3-1ubuntu5 Candidate: 4.6.3-1ubuntu5 Version table: *** 4.6.3-1ubuntu5 0 500 http://il.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages 100 /var/lib/dpkg/status and the output of ls -l /usr/bin/gcc: lrwxrwxrwx 1 root root 7 Mar 13 2012 /usr/bin/gcc -> gcc-4.6 EDIT #2: here's a verbose compiler output: gcc -v aaa.c Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.6/lto-wrapper Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.3-1ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.6 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) COLLECT_GCC_OPTIONS='-v' '-mtune=generic' '-march=x86-64' /usr/lib/gcc/x86_64-linux-gnu/4.6/cc1 -quiet -v -imultilib . -imultiarch x86_64-linux-gnu aaa.c -quiet -dumpbase aaa.c -mtune=generic -march=x86-64 -auxbase aaa -version -fstack-protector -o /tmp/ccHfcXMs.s gcc: internal compiler error: Segmentation fault (program cc1) Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.6/README.Bugs> for instructions.

  Read the article

• I can't start mysql in ubuntu 11.04

  - by shomid

  I downloaded following files of Oracle.com: MySQL-server-5.5.28-1.linux2.6.i386.rpm<br/> MySQL-client-5.5.28-1.linux2.6.i386.rpm<br/> MySQL-shared-5.5.28-1.linux2.6.i386.rpm<br/> then with "alien -i" command installing rpm packages and when starting mysql get following error: Starting MySQL<br/> .... * The server quit without updating PID file (/var/lib/mysql/omid-desktop.pid). error log: 121117 13:21:30 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121117 13:21:30 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld: Table 'mysql.plugin' doesn't exist 121117 13:21:30 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 121117 13:21:30 InnoDB: The InnoDB memory heap is disabled 121117 13:21:30 InnoDB: Mutexes and rw_locks use InnoDB's own implementation 121117 13:21:30 InnoDB: Compressed tables use zlib 1.2.3 121117 13:21:30 InnoDB: Using Linux native AIO 121117 13:21:30 InnoDB: Initializing buffer pool, size = 128.0M 121117 13:21:30 InnoDB: Completed initialization of buffer pool 121117 13:21:30 InnoDB: highest supported file format is Barracuda. 121117 13:21:30 InnoDB: Waiting for the background threads to start 121117 13:21:31 InnoDB: 1.1.8 started; log sequence number 1595675 121117 13:21:31 [Note] Recovering after a crash using mysql-bin 121117 13:21:31 [Note] Starting crash recovery... 121117 13:21:31 [Note] Crash recovery finished. 121117 13:21:31 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 121117 13:21:31 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 121117 13:21:31 [Note] Server socket created on IP: '0.0.0.0'. 121117 13:21:31 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist 121117 13:21:31 mysqld_safe mysqld from pid file /var/lib/mysql/omid-desktop.pid ended 121117 13:25:38 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121117 13:25:38 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld: Table 'mysql.plugin' doesn't exist 121117 13:25:38 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 121117 13:25:38 InnoDB: The InnoDB memory heap is disabled 121117 13:25:38 InnoDB: Mutexes and rw_locks use InnoDB's own implementation 121117 13:25:38 InnoDB: Compressed tables use zlib 1.2.3 121117 13:25:38 InnoDB: Using Linux native AIO 121117 13:25:38 InnoDB: Initializing buffer pool, size = 128.0M 121117 13:25:38 InnoDB: Completed initialization of buffer pool 121117 13:25:38 InnoDB: highest supported file format is Barracuda. 121117 13:25:38 InnoDB: Waiting for the background threads to start 121117 13:25:39 InnoDB: 1.1.8 started; log sequence number 1595675 /usr/sbin/mysqld: Too many arguments (first extra is 'start'). Use --verbose --help to get a list of available options 121117 13:25:39 [ERROR] Aborting 121117 13:25:39 InnoDB: Starting shutdown... 121117 13:25:40 InnoDB: Shutdown completed; log sequence number 1595675 121117 13:25:40 [Note] /usr/sbin/mysqld: Shutdown complete

  Read the article

• MythTV lost recordings - "No recordings available" and no recording rules either

  - by nimasmi

  I have a c.6 year old mythtv database. I recently upgraded from Ubuntu 10.04 to 12.04. This brought a MythTV upgrade from 0.24 to 0.25, which went well. Today, all my recordings have disappeared. They still exist in the /var/lib/mythtv/recordings folder, and the 'M' key in the Watch Recordings page says that there are 201 recordings available somewhere, but they will not display. See screenshot: (implicit thanks to whomever upvoted this, giving me sufficient reputation to upload images) Changing the filter does not remedy the fact that there is nothing shown in the lists. My Upcoming Recordings screen says that there are no rules set, but my list of previously recorded shows is still there, and has an entry from as recently as 3am today. mythbackend --printsched gives the following: user@box:~$ mythbackend --printsched 2012-09-22 12:59:20.537008 C mythbackend version: fixes/0.25 [v0.25.2-15-g46cab93] www.mythtv.org 2012-09-22 12:59:20.537043 C Qt version: compile: 4.8.1, runtime: 4.8.1 2012-09-22 12:59:20.537048 N Enabled verbose msgs: general 2012-09-22 12:59:20.537076 N Setting Log Level to LOG_INFO 2012-09-22 12:59:20.537142 I Added logging to the console 2012-09-22 12:59:20.537152 I Added database logging to table logging 2012-09-22 12:59:20.537279 N Setting up SIGHUP handler 2012-09-22 12:59:20.537373 N Using runtime prefix = /usr 2012-09-22 12:59:20.537394 N Using configuration directory = /home/user/.mythtv 2012-09-22 12:59:20.537999 I Assumed character encoding: en_GB.UTF-8 2012-09-22 12:59:20.538599 N Empty LocalHostName. 2012-09-22 12:59:20.538610 I Using localhost value of box 2012-09-22 12:59:20.538792 I Testing network connectivity to '192.168.1.2' 2012-09-22 12:59:20.539420 I Starting process manager 2012-09-22 12:59:20.541412 I Starting IO manager (read) 2012-09-22 12:59:20.541715 I Starting IO manager (write) 2012-09-22 12:59:20.541836 I Starting process signal handler 2012-09-22 12:59:20.684497 N Setting QT default locale to EN_GB 2012-09-22 12:59:20.684694 I Current locale EN_GB 2012-09-22 12:59:20.684813 N Reading locale defaults from /usr/share/mythtv//locales/en_gb.xml 2012-09-22 12:59:20.697623 I New static DB connectionDataDirectCon 2012-09-22 12:59:20.704769 I MythCoreContext: Connecting to backend server: 192.168.1.2:6543 (try 1 of 1) Calculating Schedule from database. Inputs, Card IDs, and Conflict info may be invalid if you have multiple tuners. 2012-09-22 12:59:27.710538 E MythSocket(21dfcd0:14): readStringList: Error, timed out after 7000 ms. 2012-09-22 12:59:27.710592 C Protocol version check failure. The response to MYTH_PROTO_VERSION was empty. This happens when the backend is too busy to respond, or has deadlocked in due to bugs or hardware failure. Things I have tried so far: restart the backend restart the frontend run mythtv-setup and check database passwords and IP addresses change the frontend setting for backend IP from localhost to 192.168.1.2 (the backend/frontend's IP) run optimize_mythdb.pl Other suggestions appreciated.

  Read the article

• Best practices for logging and tracing in .NET

  - by Levidad

  I've been reading a lot about tracing and logging, trying to find some golden rule for best practices in the matter, but there isn't any. People say that good programmers produce good tracing, but put it that way and it has to come from experience. I've also read similar questions in here and through the internet and they are not really the same thing I am asking or do not have a satisfying answer, maybe because the questions lack some detail. So, folks say that tracing should sort of replicate the experience of debugging the application in cases where you can't attach a debugger. It should provide enough context so that you can see which path is taken at each control point in the application. Going deeper, you can even distinguish between tracing and event logging, in that "event logging is different from tracing in that it captures major states rather than detailed flow of control". Now, say I want to do my tracing and logging using only the standard .NET classes, those in the System.Diagnostics namespace. I figured that the TraceSource class is better for the job than the static Trace class, because I want to differentiate among the trace levels and using the TraceSource class I can pass in a parameter informing the event type, while using the Trace class I must use Trace.WriteLineIf and then verify things like SourceSwitch.TraceInformation and SourceSwitch.TraceErrors, and it doesn't even have properties like TraceVerbose or TraceStart. With all that in mind, would you consider a good practice to do as follows: Trace a "Start" event when begining a method, which should represent a single logical operation or a pipeline, along with a string representation of the parameter values passed in to the method. Trace an "Information" event when inserting an item into the database. Trace an "Information" event when taking one path or another in an important if/else statement. Trace a "Critical" or "Error" in a catch block depending on weather this is a recoverable error. Trace a "Stop" event when finishing the execution of the method. And also, please clarify when best to trace Verbose and Warning event types. If you have examples of code with nice trace/logging and are willing to share, that would be excelent. Note: I've found some good information here, but still not what I am looking for: http://msdn.microsoft.com/en-us/magazine/ff714589.aspx Thanks in advance!

  Read the article

• Configure Jenkins and Tomcat using Puppet on Vagrant

  - by ex3v

  I'm playing with setting up my first Spring + jenkins + Tomcat CI dev environment. For now it's just a test/fun phase, but in the near future I'll be starting new project with my coworkers. That's the reason that I want development environment virtualized and exactly te same on every development machine, as well as on production server. I choosen to use Vagrant and to try to write puppet scripts that not only install everything, but also configure everything so each of us will have the same jenkins plugins, same jenkins and tomcat login and password, and literally after calling vagrant up we are ready to work. What I managed to do so far is installation of stuff needed and port forwarding. My vagrantfile looks like this (comments stripped): VAGRANTFILE_API_VERSION = "2" Vagrant.configure(VAGRANTFILE_API_VERSION) do |config| config.vm.box = "precise32" config.vm.box_url = "http://files.vagrantup.com/precise32.box" config.vm.network :forwarded_port, guest: 80, host: 8090 config.vm.network :forwarded_port, guest: 8080, host: 8091 config.vm.network :private_network, ip: "192.168.33.10" config.vm.provision :puppet do |puppet| puppet.manifests_path = "puppet/" puppet.manifest_file = "default.pp" puppet.options = ['--verbose'] end end And this is my puppet file: Exec { path => [ "/bin/", "/sbin/" , "/usr/bin/", "/usr/sbin/" ] } class system-update { exec { 'apt-get update': command => 'apt-get update', } $sysPackages = [ "build-essential" ] package { $sysPackages: ensure => "installed", require => Exec['apt-get update'], } } class tomcat { package { "tomcat": ensure => present, require => Class["system-update"], } service { "tomcat": ensure => "running", require => Package["tomcat"], } } class jenkins { package { "jenkins": ensure => present, require => Class["system-update"], } service { "jenkins": ensure => "running", require => Package["jenkins"], } } include system-update include tomcat include jenkins Now, when I hit vagrant provision and go to http://localhost:8091/ I can see jenkins running, so above script works good. Next step is configurating jenkins and tomcat by extending above puppet scripts. I'm pretty green when it comes to CI. After wandering around web I've found few tutorials about jenkins configuration (here's one of them). I really want to move configuration presented in this tutorial to puppet file, so when I spread my vagrantfile and puppet file between my coworkers, I will be sure that everyone has exactly te same setup. Unfortunately I'm also green about using puppet, I don't know how to do this. Any help will be apreciated.

  Read the article

• Audio Stutters at gdm

  - by Allan

  Ok I have a problem every 2 times out of 3 I login (I cant be specific it fairly random) I get a Stuttering GDM warning (not the login sound just the Bell sound to wake you up) the only way to stop it is to login I have a Fujitsu Siemens Amilo 1718 with a 2gig of memory (only hardware mod) using 10.10 Maverick and I have disabled KMS as my system was freezing as per the release notes. The only time this has happened before on the same machine was when I gave Kubuntu a try when 10.04 came out then it happened at the login screen and at random times while listening to music in any program. By the way audio is fine as is almost everything else once I have logged in. I would like an answer to this as I am an advocate of Ubuntu and its kind of embarrassing when the first thing that happens is *bing*. as requested Daniel alsa-info Pulse verbose log Not sure how useful the pulse log will be as I cant replicate the bug with a terminal open but I wouldnt be asking the question if I knew the answer so..... Edit 24/12/2010 ......been living on cocktail sausages and pickled onions for five days now made a make shift splint with cocktail sticks..... oops so updated the alsa drivers but I still get the same message in the dmesg No response from codec, disabling MSI: last cmd=0x10a90000 googleing it brings up a forum post from some other distro with a green logo the only common denominator seems to be graphics ie ATI Radeon XPRESS 200M which is why I have had to turn of kms as the chip is so old that small mice try to eat the "kernel" ;) funnily enough following the bug link at the end of the post, I found a comment about "Ubuntu Black Magic" so mabey I am coming at this from the wrong angle...... Bad Joo Joo any one. I will try the second part of Daniels Fix and Update with the result. The final Edit: (Plays air guitar) In the end neither of these solved the problem as such However I have given Roland a tick for reminding me of the solution and I gave Daniel the Bounty for the effort in trying to solve the problem. The answer for future readers was the enable the correct HD Audio Model I found the answer back when using Karmic Koala 9.10 in this forum post Amilo Li1718 Skype - Can't get it working... the model is options snd-hda-intel model=3stack position_fix=1 enable=yes which can be added to the end of alsa-base.conf thanks all for helping and hope anyone with a similar problem will find the answer here.

  Read the article

• Identify memory leak in Java app

  - by Vincent Ma

  One important advantage of java is programer don't care memory management and GC handle it well. Maybe this is one reason why java is more popular. As Java programer you real dont care it? After you meet Out of memory you will realize it it’s not true. Java GC and memory is big topic you can get some information in here Today just let me show how to identify memory leak quickly. Let quickly review demo java code, it’s one kind of memory leak in our code, using static collection and always add some object. import java.util.ArrayList;import java.util.List; public class MemoryTest { public static void main(String[] args) { new Thread(new MemoryLeak(), "MemoryLeak").start(); }} class MemoryLeak implements Runnable { public static List<Integer> leakList = new ArrayList<Integer>(); public void run() { int num =0; while(true) { try { Thread.sleep(1); } catch (InterruptedException e) { } num++; Integer i = new Integer(num); leakList.add(i); } }} run it with java -verbose:gc -XX:+PrintGCDetails -Xmx60m -XX:MaxPermSize=160m MemoryTest after about some minuts you will get Exception in thread "MemoryLeak" java.lang.OutOfMemoryError: Java heap space at java.util.Arrays.copyOf(Arrays.java:2760) at java.util.Arrays.copyOf(Arrays.java:2734) at java.util.ArrayList.ensureCapacity(ArrayList.java:167) at java.util.ArrayList.add(ArrayList.java:351) at MemoryLeak.run(MemoryTest.java:25) at java.lang.Thread.run(Thread.java:619)Heap def new generation total 18432K, used 3703K [0x045e0000, 0x059e0000, 0x059e0000) eden space 16384K, 22% used [0x045e0000, 0x0497dde0, 0x055e0000) from space 2048K, 0% used [0x055e0000, 0x055e0000, 0x057e0000) to space 2048K, 0% used [0x057e0000, 0x057e0000, 0x059e0000) tenured generation total 40960K, used 40959K [0x059e0000, 0x081e0000, 0x081e0000) the space 40960K, 99% used [0x059e0000, 0x081dfff8, 0x081e0000, 0x081e0000) compacting perm gen total 12288K, used 2083K [0x081e0000, 0x08de0000, 0x10de0000) the space 12288K, 16% used [0x081e0000, 0x083e8c50, 0x083e8e00, 0x08de0000)No shared spaces configured. OK let us quickly identify it using JProfile Download JProfile in here  Run JProfile and attach MemoryTest get largest size of  Objects in Memory View in here is Integer then select Integer and go to Heap Walker. get GC Graph for this object  Then you get detail code raise this issue quickly now.  That is enjoy it.

  Read the article

• How do I set up nvidia graphics adapter to put out 1080p, it seems to be using interlace mode>

  - by keepitsimpleengineer

  After upgrading to 12.04, my mythbuntu client/server seems to be running in 1080i, the clue comes from: [ 1176.117] (II) NVIDIA(0): Setting mode "1920x1080_60i" [ 1231.340] (II) NVIDIA(0): Setting mode "DFP-1:1920x1080_60@1920x1080+0+0" This is from Xorg.0.log. This whole thing started from video tearing when watching Mythtv recordings. It didn't happen in 10.10. Should I use "TVStandard" "HD1080p" in the screen section since this is a dedicated HTPC? It only connects to an HDTV (1080p) via hdmi. Here is the current xorg.conf file: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Keyboard0" "CoreKeyboard" # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" FontPath "unix/:7100" EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Mouse0" # Driver "mouse" # Option "Protocol" "auto" # Option "Device" "/dev/psaux" # Option "Emulate3Buttons" "no" # Option "ZAxisMapping" "4 5" #EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Keyboard0" # Driver "kbd" #EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "SAMSUNG" HorizSync 26.0 - 81.0 VertRefresh 24.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 240" Option "TripleBuffer" "1" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection After a little digging, the question changes slightly, to wit... Per Chapter 19 of nvidia README... "If the EDID for the display device reported a preferred mode timing, and that mode timing is considered a valid mode, then that mode is used as the "nvidia-auto-select" mode." The EDID for my HDMI connected LCD monitor says use first device as preferred. Prefer first detailed timing : Yes Also: (--) NVIDIA(0): EDID maximum pixel clock : 230.0 MHz The list: (from startx -- -verbose 6 ) (--) NVIDIA(0): Detailed Timings: (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 148.50 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1089, 1125 (--) NVIDIA(0): H/V Polarity : +/+ This is the actual mode selected: (from xorg.0.log) (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 74.18 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1094, 1124 (--) NVIDIA(0): H/V Polarity : +/+ (--) NVIDIA(0): Extra : Interlaced (--) NVIDIA(0): CEA Format : 5 So my HTPC is down-converting to 1080i and then the Monitor is up-converting to 1080p How can I fix this, please?

  Read the article

• How to debug lag using Bluetooth connected mouse and A2DP headset?

  - by gertvdijk

  I own a Logitech M555b mouse (since a week) for use with my HP Elitebook 8570w laptop running Kubuntu 12.04. Works fine right after connecting using the KDE Bluetooth control module. However, after some time (seemingly random), it starts to lag. Movements are being delayed for roughly 500ms for a short period of time. Usually it recovers after some time too, but it can take minutes. All actions are being delayed: movements, click, scrolls. Additionally, the movements can be choppy during these times. A workaround that always works for the same short period of time is to disconnect an re-connect the mouse. This can be done using the same KDE Bluetooth control module. What did I try already? Running this at boot time: echo on > `readlink -f /sys/class/bluetooth/hci0`/../../../power/level To disable any power saving features on the Bluetooth hci0 device. Check the mouse's batteries (it's just a week old, other new batteries: same result) Checking logs and kernel messages about Bluetooth-related entries: none aside the expected messages on connect time. I'm running kernel 3.5.0-13-generic as provided in the xorg-edgers PPA. Booting the regular 3.2 Precise kernel results in the same behaviour. Some other information that may help: It happens when no other Bluetooth connections are active on the machine. Similar symptoms also occur on my Bluetooth stereo (A2DP) headset, but then it's audio lagging and skipping. Swapping Bluetooth profiles as described here then helps. Conclusion: it's not the mouse that's faulty. The headset always worked fine using my now dead Thinkpad T61p with built-in Bluetooth. The bluetooth module in my laptop is connected via USB and shows up as Bus 002 Device 003: ID 0a5c:21e1 Broadcom Corp. I'm mobile and several people around me are using Bluetooth at work (A2DP mostly). It also occurs at home, where my neighbours are probably using Bluetooth as well. It could just be radio interference, but I think Bluetooth connections should just hop to another channel. And, moreover, it just works properly instantly when re-connecting. Therefore I think it's a software driver issue and I'd like to debug it. Is there any way to get more verbose logging on the Bluetooth(-hid) modules?

  Read the article

• Misaligned Display on Resume

  - by Shaun Killingbeck

  I have an odd issue with my laptop display when resuming from suspend. When I have an additional monitor connected there is no issue. However without an additional monitor connected, after resuming only the left 10% of the laptop screen (just enough to show the Unity Launcher and a bit more) is visibly working, although strangely in a screenshot this same 10% is shown on the right hand side of the screenshot: I ran xrandr --verbose before and after resume, and the only difference (using diff) was: 2c2 < LVDS connected 1366x768+0+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm --- > LVDS connected 1366x768+1280+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm This seems to suggest the screen position has been shifted by 1280 horizontally, the width of the second monitor I use. Indeed, running the command xrandr --output LVDS --pos 0x0 does bring the screen back to normal. However, I don't want to have to run this command every time, I'd prefer to cure the source of the problem than just correct the symptoms. Any ideas on how to get Ubuntu to keep the display configuration settings from before suspend when it resumes? or why it changes at all? Heres some technical details that might be pertinent: HP Pavilion DV6 Laptop Ubuntu 13.04 AMD Radeon HD 6400M Series AMD Radeon HD 6520G Using proprietary flgrx-updates driver and amdcccle (Catalyst Control Center) (Unfortunately the open source driver causes my laptop to run even hotter than it already does, otherwise I'd use that) The contents of Xorg.conf: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "1280 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1366x768" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1280x1024" EndSection Section "Device" Identifier "amdcccle-Device[0]-0" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:0:1:0" EndSection Section "Device" Identifier "amdcccle-Device[0]-1" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" BusID "PCI:0:1:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[0]-0" Device "amdcccle-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 2646 2646 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[0]-1" Device "amdcccle-Device[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• The most dangerous SQL Script in the world!

  - by DrJohn

  In my last blog entry, I outlined how to automate SQL Server database builds from concatenated SQL Scripts. However, I did not mention how I ensure the database is clean before I rebuild it. Clearly a simple DROP/CREATE DATABASE command would suffice; but you may not have permission to execute such commands, especially in a corporate environment controlled by a centralised DBA team. However, you should at least have database owner permissions on the development database so you can actually do your job! Then you can employ my universal "drop all" script which will clear down your database before you run your SQL Scripts to rebuild all the database objects. Why start with a clean database? During the development process, it is all too easy to leave old objects hanging around in the database which can have unforeseen consequences. For example, when you rename a table you may forget to delete the old table and change all the related views to use the new table. Clearly this will mean an end-user querying the views will get the wrong data and your reputation will take a nose dive as a result! Starting with a clean, empty database and then building all your database objects using SQL Scripts using the technique outlined in my previous blog means you know exactly what you have in your database. The database can then be repopulated using SSIS and bingo; you have a data mart "to go". My universal "drop all" SQL Script To ensure you start with a clean database run my universal "drop all" script which you can download from here: 100_drop_all.zip By using the database catalog views, the script finds and drops all of the following database objects: Foreign key relationships Stored procedures Triggers Database triggers Views Tables Functions Partition schemes Partition functions XML Schema Collections Schemas Types Service broker services Service broker queues Service broker contracts Service broker message types SQLCLR assemblies There are two optional sections to the script: drop users and drop roles. You may use these at your peril, particularly as you may well remove your own permissions! Note that the script has a verbose mode which displays the SQL commands it is executing. This can be switched on by setting @debug=1. Running this script against one of the system databases is certainly not recommended! So I advise you to keep a USE database statement at the top of the file. Good luck and be careful!!

  Read the article

• C# Dev - I've tried Lisps, but I don't get it.

  - by Jonathan Mitchem

  After a few months of learning about and playing with lisps, both CL and a bit of Clojure, I'm still not seeing a compelling reason to write anything in it instead of C#. I would really like some compelling reasons, or for someone to point out that I'm missing something really big. The strengths of a Lisp (per my research): Compact, expressive notation - More so than C#, yes... but I seem to be able to express those ideas in C# too. Implicit support for functional programming - C# with LINQ extension methods: mapcar = .Select( lambda ) mapcan = .Select( lambda ).Aggregate( (a,b) = a.Union(b) ) car/first = .First() cdr/rest = .Skip(1) .... etc. Lambda and higher-order function support - C# has this, and the syntax is arguably simpler: "(lambda (x) ( body ))" versus "x = ( body )" "#(" with "%", "%1", "%2" is nice in Clojure Method dispatch separated from the objects - C# has this through extension methods Multimethod dispatch - C# does not have this natively, but I could implement it as a function call in a few hours Code is Data (and Macros) - Maybe I haven't "gotten" macros, but I haven't seen a single example where the idea of a macro couldn't be implemented as a function; it doesn't change the "language", but I'm not sure that's a strength DSLs - Can only do it through function composition... but it works Untyped "exploratory" programming - for structs/classes, C#'s autoproperties and "object" work quite well, and you can easily escalate into stronger typing as you go along Runs on non-Windows hardware - Yeah, so? Outside of college, I've only known one person who doesn't run Windows at home, or at least a VM of Windows on *nix/Mac. (Then again, maybe this is more important than I thought and I've just been brainwashed...) The REPL for bottom-up design - Ok, I admit this is really really nice, and I miss it in C#. Things I'm missing in a Lisp (due to a mix of C#, .NET, Visual Studio, Resharper): Namespaces. Even with static methods, I like to tie them to a "class" to categorize their context (Clojure seems to have this, CL doesn't seem to.) Great compile and design-time support the type system allows me to determine "correctness" of the datastructures I pass around anything misspelled is underlined realtime; I don't have to wait until runtime to know code improvements (such as using an FP approach instead of an imperative one) are autosuggested GUI development tools: WinForms and WPF (I know Clojure has access to the Java GUI libraries, but they're entirely foreign to me.) GUI Debugging tools: breakpoints, step-in, step-over, value inspectors (text, xml, custom), watches, debug-by-thread, conditional breakpoints, call-stack window with the ability to jump to the code at any level in the stack (To be fair, my stint with Emacs+Slime seemed to provide some of this, but I'm partial to the VS GUI-driven approach) I really like the hype surrounding Lisps and I gave it a chance. But is there anything I can do in a Lisp that I can't do as well in C#? It might be a bit more verbose in C#, but I also have autocomplete. What am I missing? Why should I use Clojure/CL?

  Read the article

• Is there a pedagogical game engine?

  - by K.G.

  I'm looking for a book, website, or other resource that gives modern 3D game engines the same treatment as Operating Systems: Design and Implementation gave operating systems. I have read Jason Gregory's Game Engine Architecture, which I enjoyed. However, by intent the author treated components of the architecture as atomic units, whereas what I'm interested in is the plumbing between those units that makes a coherent whole out of ideally loosely coupled parts. In books such as these, one usually reads that "that's academic," but that's the point! I have also read Julian Gold's Object-oriented Game Development, which likewise was good, but I feel is beginning to show its age. Since even mobile platforms these days are multicore and have fast video memory, those kinds of things (concurrency, display item buffering) would ideally be covered. There are other resources, such as the Doom 3 source code, which is highly instructive for its being a shipped product. The problem with those is as follows: float Q_rsqrt( float number ) { long i; float x2, y; const float threehalfs = 1.5F; x2 = number * 0.5F; y = number; i = * ( long * ) &y; // evil floating point bit level hacking i = 0x5f3759df - ( i >> 1 ); // what the f***? y = * ( float * ) &i; y = y * ( threehalfs - ( x2 * y * y ) ); // 1st iteration // y = y * ( threehalfs - ( x2 * y * y ) ); // 2nd iteration, this can be removed return y; } To wit, while brilliant, this kind of source requires more enlightenment than I can usually muster upon first read. In summary, here's my white whale: For an adult reader with experience in programming. I wish I could save all the trees killed by every. Single. Game Programming book ever devoting the first two chapters to "Now just what is a variable anyway?" In C or C++, very preferably C++. Languages that are more concise are fantastic for teaching, except for when what you want to learn is how to cope with a verbose language. There is also the benefit of the guardrails that C++ doesn't provide, such as garbage collection. Platform agnostic. I'm sincerely afraid that this book is out there and it's Visual C++/DirectX oriented. I'm a Linux guy, and I'd do what it takes, but I would very much like to be able to use OpenGL. Thanks for everything! Before anyone gets on my case about it, Fast inverse square root was from Quake III Arena, not Doom 3!

  Read the article

• determine if udp socket can be accessed via external client

  - by JohnMerlino

  I don't have access to company firewall server. but supposedly the port 1720 is open on my one ubuntu server. So I want to test it with netcat: sudo nc -ul 1720 The port is listening on the machine ITSELF: sudo netstat -tulpn | grep nc udp 0 0 0.0.0.0:1720 0.0.0.0:* 29477/nc The port is open and in use on the machine ITSELF: lsof -i -n -P | grep 1720 gateway 980 myuser 8u IPv4 187284576 0t0 UDP *:1720 Checked the firewall on current server: sudo ufw allow 1720/udp Skipping adding existing rule Skipping adding existing rule (v6) sudo ufw status verbose | grep 1720 1720/udp ALLOW IN Anywhere 1720/udp ALLOW IN Anywhere (v6) But I try echoing data to it from another computer (I replaced the x's with the real integers): echo "Some data to send" | nc xx.xxx.xx.xxx 1720 But it didn't write anything. So then I try with telnet from the other computer as well: telnet xx.xxx.xx.xxx 1720 Trying xx.xxx.xx.xxx... telnet: connect to address xx.xxx.xx.xxx: Operation timed out telnet: Unable to connect to remote host Although I don't think telnet works with udp sockets. I ran nmap from another computer within the same local network and this is what I got: sudo nmap -v -A -sU -p 1720 xx.xxx.xx.xx Starting Nmap 5.21 ( http://nmap.org ) at 2013-10-31 15:41 EDT NSE: Loaded 36 scripts for scanning. Initiating Ping Scan at 15:41 Scanning xx.xxx.xx.xx [4 ports] Completed Ping Scan at 15:41, 0.10s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 15:41 Completed Parallel DNS resolution of 1 host. at 15:41, 0.00s elapsed Initiating UDP Scan at 15:41 Scanning xtremek.com (xx.xxx.xx.xx) [1 port] Completed UDP Scan at 15:41, 0.07s elapsed (1 total ports) Initiating Service scan at 15:41 Initiating OS detection (try #1) against xtremek.com (xx.xxx.xx.xx) Retrying OS detection (try #2) against xtremek.com (xx.xxx.xx.xx) Initiating Traceroute at 15:41 Completed Traceroute at 15:41, 0.01s elapsed NSE: Script scanning xx.xxx.xx.xx. NSE: Script Scanning completed. Nmap scan report for xtremek.com (xx.xxx.xx.xx) Host is up (0.00013s latency). PORT STATE SERVICE VERSION 1720/udp closed unknown Too many fingerprints match this host to give specific OS details Network Distance: 1 hop TRACEROUTE (using port 1720/udp) HOP RTT ADDRESS 1 0.13 ms xtremek.com (xx.xxx.xx.xx) Read data files from: /usr/share/nmap OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 2.04 seconds Raw packets sent: 27 (2128B) | Rcvd: 24 (2248B). The only thing I can think of is a firewall or vpn issue. Is there anything else I can check for before requesting that they look at the firewall server again?

  Read the article

• SSH from external network refused

  - by wulfsdad

  I've installed open-ssh-server on my home computer(running Lubuntu 12.04.1) in order to connect to it from school. This is how I've set up the sshd_config file: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for #Port 22 Port 2222 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH #LogLevel INFO LogLevel VERBOSE # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net Banner /etc/sshbanner.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes #specify which accounts can use SSH AllowUsers onlyme I've also configured my router's port forwarding table to include: LAN Ports: 2222-2222 Protocol: TCP LAN IP Address: "IP Address" displayed by viewing "connection information" from right-click menu of system tray Remote Ports[optional]: n/a Remote IP Address[optional]: n/a I've tried various other configurations as well, using primary and secondary dns, and also with specifying remote ports 2222-2222. I've also tried with TCP/UDP (actually two rules because my router requires separate rules for each protocol). With any router port forwarding configuration, I am able to log in with ssh -p 2222 -v localhost But, when I try to log in from school using ssh -p 2222 onlyme@IP_ADDRESS I get a "No route to host" message. Same thing when I use the "Broadcast Address" or "Default Route/Primary DNS". When I use the "subnet mask", ssh just hangs. However, when I use the "secondary DNS" I recieve a "Connection refused" message. :^( Someone please help me figure out how to make this work.

  Read the article

• High CPU load for 1:30 minutes when mounting ext4-raid partition

  - by sirion

  I have a raid 5 (software) with 5x2TB drives. I encrypted the raid with cryptsetup and put an ext4-partition on top. In the beginning opening and mounting the raid took less than 10 seconds, now (for a few weeks) mounting alone takes 1:30 minutes and the cpu stays around 93% the whole time: The output of "time sudo mount /dev/mapper/8000 /media/8000" is: real 1m31.952s user 0m0.008s sys 1m25.229s At the same time only one line is added to /var/log/syslog: kernel: [ 2240.921381] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) My Ubuntu-version is "12.04.1 LTS" and no updates are pending. I checked the partition with fsck, but it says that all is ok. The "cryptsetup luksOpen" command only takes a few seconds. I also tried changing the raid-bitmap (as it was suggested in some forum) but it did not change the behaviour. sudo mdadm --grow /dev/md0 -b internal and sudo mdadm --grow /dev/md0 -b none I had the idea that it might be the hardware being slow, but a read test with "sudo hdparm -t /dev/md0" spit out values between 62 and 159 MB/sec: Timing buffered disk reads: 382 MB in 3.00 seconds = 127.14 MB/sec Timing buffered disk reads: 482 MB in 3.02 seconds = 159.62 MB/sec Timing buffered disk reads: 190 MB in 3.03 seconds = 62.65 MB/sec Timing buffered disk reads: 474 MB in 3.02 seconds = 157.12 MB/sec Although I think it is strange that the read rate jumps by more than 100% - could that mean something? The speed test when reading from the mapped (decrypted) device shows similar behavior, although it is of course much slower. "sudo hdparm -t /dev/mapper/8000": Timing buffered disk reads: 56 MB in 3.02 seconds = 18.54 MB/sec Timing buffered disk reads: 122 MB in 3.09 seconds = 39.43 MB/sec Timing buffered disk reads: 134 MB in 3.02 seconds = 44.35 MB/sec The output of a verbose mount "mount -vvv /dev/mapper/8000 /media/8000" does not help much: mount: fstab path: "/etc/fstab" mount: mtab path: "/etc/mtab" mount: lock path: "/etc/mtab~" mount: temp path: "/etc/mtab.tmp" mount: UID: 0 mount: eUID: 0 mount: spec: "/dev/mapper/8000" mount: node: "/media/8000" mount: types: "(null)" mount: opts: "(null)" mount: you didn't specify a filesystem type for /dev/mapper/8000 I will try type ext4 mount: mount(2) syscall: source: "/dev/mapper/8000", target: "/media/8000", filesystemtype: "ext4", mountflags: -1058209792, data: (null) Any idea where I could find additional information on why mounting takes so long, or what additional tests I could run?

  Read the article

• More elegant way to avoid hard coding the format of a a CSV file?

  - by dsollen

  I know this is trivial issue, but I just feel this can be more elegant. So I need to write/read data files for my program, lets say they are CSV for now. I can implement the format as I see fit, but I may have need to change that format later. The simply thing to do is something like out.write(For.getValue()+","+bar.getMinValue()+","+fi.toString()); This is easy to write, but obviously is guilty of hard coding and the general 'magic number' issue. The format is hard-coded, requires parsing of the code to figure out the file format, and changing the format requires changing multiple methods. I could instead have my constants specifying the location that I want each variable to be saved in the CSV file to remove some of the 'magic numbers'; then save/load into the an array at the location specified by the constants: int FOO_LOCATION=0; int BAR_MIN_VAL_LOCATION=1; int FI_LOCATION=2 int NUM_ARGUMENTS=3; String[] outputArguments=new String[NUM_ARGUMENTS]; outputArguments[FOO_LOCATION] = foo.getValue(); outputArgumetns[BAR_MIN_VAL_LOCATION] = bar.getMinValue(); outptArguments[FI_LOCATOIN==fi.toString(); writeAsCSV(outputArguments); But this is...extremely verbose and still a bit ugly. It makes it easy to see the format of existing CSV and to swap the location of variables within the file easily. However, if I decide to add an extra value to the csv I need to not only add a new constant, but also modify the read and write methods to add the logic that actually saves/reads the argument from the array; I still have to hunt down every method using these variables and change them by hand! If I use Java enums I can clean this up slightly, but the real issue is still present. Short of some sort of functional programming (and java's inner classes are too ugly to be considered functional) I still have no obvious way of clearly expressing what variable is associated with each constant short of writing (and maintaining) it in the read/write methods. For instance I still need to write somewhere that the FOO_LOCATION specifies the location of foo.getValue(). It seems as if there should be a prettier, easier to maintain, manner for approaching this? Incidentally, I'm working in java at the moment, however, I am interested conceptually about the design approach regardless of language. Some library in java that does all the work for me is definitely welcome (though it may prove more hassle to get permission to add it to the codebase then to just write something by hand quickly), but what I'm really asking is more about how to write elegant code if you had to do this by hand.

  Read the article

• ARR troubleshooting 502.3 / WinHttp tracing on Server 2012

  - by nachojammers

  I have the following scenario: 3 windows server 2012 virtual servers, all with IIS 8: 1 server with Application Request Routing 3 2 servers with the web applications that the ARR server routes to I am getting intermittent 502 3 12002 errors. Following this guide http://www.iis.net/learn/extensions/troubleshooting-application-request-routing/troubleshooting-502-errors-in-arr I have identified that I need to trace using netsh the WinHttp/WebIO providers to get to the real error code that is mapped to the 12002 error code. I run the trace as the article suggests: netsh trace start scenario=internetclient capture=yes persistent=no level=verbose tracefile=c:\temp\net.etl When analysing the output of the netsh traces, I don't get the level of information that the article suggests I should. Specifically I only get the following types of entry in the trace viewed using netmon: WINHTTP_MicrosoftWindowsWinHttp:Stopping WorkItem Thread Action... WINHTTP_MicrosoftWindowsWinHttp:Starting WorkItem Thread Action... WINHTTP_MicrosoftWindowsWinHttp:Queue Overlapped IO Thread Action... I certainly don't get anything detailed enough that would help me understand why am getting any timeouts. Is there any reason why Server 2012 wouldn't trace the WinHttp API to the level I need? Thanks

  Read the article

• uWSGI log file...permission denied to read file

  - by bkev

  I have a server running Django/Nginx/uWSGI with uWSGI in emperor mode, and the error log for it (the vassal-level error log, not the emperor-level log) has a continual permissions error every time it spawns a new worker, like so: Tue Jun 26 19:34:55 2012 - Respawned uWSGI worker 2 (new pid: 9334) Error opening file for reading: Permission denied Problem is, I don't know what file it's having trouble opening; it's not the log file, obviously, since I'm looking at it and it's writing to that without issue. Any way to find out? I'm running the apt-get version of uWSGI 1.0.3-debian through Upstart on Ubuntu 12.04. The site is working successfully, aside from what seems like a memory leak...hence my looking at the log file. My Upstart conf file description "uWSGI" start on runlevel [2345] stop on runlevel [06] respawn env UWSGI=/usr/bin/uwsgi env LOGTO=/var/log/uwsgi/emperor.log exec $UWSGI \ --master \ --emperor /etc/uwsgi/vassals \ --die-on-term \ --auto-procname \ --no-orphans \ --logto $LOGTO \ --logdate My Vassal ini file: [uwsgi] # Variables base = /srv/env/mysiteenv # Generic Config uid = uwsgi gid = uwsgi socket = 127.0.0.1:5050 master = true processes = 2 reload-on-as = 128 harakiri = 60 harakiri-verbose = true auto-procname = true plugins = http,python cache = 2000 home = %(base) pythonpath = %(base)/mysite module = wsgi logto = /srv/log/mysite/uwsgi_error.log logdate = true

  Read the article

• VMWare ESXi 4.1- 5.1 installation hang

  - by osij2is

  I'm well aware that I'm trying to install VMWare ESXi 5.1 on hardware that's not on the HCL. I can't find my motherboard on the ultimatewhitebox site as well. I acknowledge these issues in advance. What I'm trying to find is someway to access the logs during installation or see a console or log file to see where the installation is hanging at and remove a device or change a setting in the BIOS. The installation is hanging, not getting a purple screen of death. I thought by hitting ALT+F10 or F12 (or some key combination as such) would enable me to see the console but no such luck. I haven't been able to find much within the ESXi online documentation either. Here's the parts I'm using: AMD Phenom II x3 700 MSI 890FXA-GD70 (IOMMU capable) 16GB DDR3 1333 RAM (2x8GB DIMMs) Intel Pro 1000 (Dual-GbE) PCIe x4 (removed during installation) LSI 9211-8i PCIe (removed during installation) LSI 9201-16i PCIe (removed during installation) Matrox video card BIOS settings: IOMMU is enabled (during 5.1 IOMMU successfully loads) AHCI is enabled (hangs for 4.1) Both onboard Realtek NICs are disabled For ESXi 5.1, the installation hangs after vmkapi_v2_0_0_0 is loaded. For ESXi 5.0, it hangs when loading the vmklinux_9 module. For ESXi 4.1 U3, the installation hangs during loading of ahci module. Again, I'm looking for some way to view a console (service console?) or log file during or after an installation attempt to see what verbose error messages or logging can lead me to solving this problem.

  Read the article

• How to import certificate for Apache + LDAPS?

  - by user101956

  I am trying to get ldaps to work through Apache 2.2.17 (Windows Server 2008). If I use ldap (plain text) my configuration works great. LDAPTrustedGlobalCert CA_DER C:/wamp/certs/Trusted_Root_Certificate.cer LDAPVerifyServerCert Off <Location /> AuthLDAPBindDN "CN=corpsvcatlas,OU=Service Accounts,OU=u00958,OU=00958,DC=hca,DC=corpad,DC=net" AuthLDAPBindPassword ..removed.. AuthLDAPURL "ldaps://gc-hca.corpad.net:3269/dc=hca,dc=corpad,dc=net?sAMAccountName?sub" AuthType Basic AuthName "USE YOUR WINDOWS ACCOUNT" AuthBasicProvider ldap AuthUserFile /dev/null require valid-user </Location> I also tried the other encryption choices besides CA_DER just to be safe, with no luck. Finally, I also needed this with Apache tomcat. For tomcat I used the tomcat JRE and ran a line like this: keytool -import -trustcacerts -keystore cacerts -storepass changeit -noprompt -alias mycert -file Trusted_Root_Certificate.cer After doing the above line ldaps worked greate via tomcat. This lets me know that my certificate is a-ok. Update: Both ldap modules are turned on, since using ldap instead of ldaps works fine. When I run a git clone this is the error returned: C:\Tempgit clone http://eqb9718@localhost/git/Liferay.git Cloning into Liferay... Password: error: The requested URL returned error: 500 while accessing http://eqb9718@loca lhost/git/Liferay.git/info/refs fatal: HTTP request failed access.log has this: 127.0.0.1 - eqb9718 [23/Nov/2011:18:25:12 -0600] "GET /git/Liferay.git/info/refs service=git-upload-pack HTTP/1.1" 500 535 127.0.0.1 - eqb9718 [23/Nov/2011:18:25:33 -0600] "GET /git/Liferay.git/info/refs HTTP/1.1" 500 535 apache_error.log has nothing. Is there any more verbose logging I can turn on or better tests to do?

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >