Search Results

Search found 5464 results on 219 pages for 'effect'.

Page 190/219 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

• So I want to separate my Program Files from the hard disk with the other system files. What is the b

  - by grg-n-sox

  So I am running Windows 7 as my only OS. I have two hard drives on my computer. The first one is a 74GB Western Digital 10K RPM Raptor. The second one is a 1TB Seagate Barracuda (couldn't remember if it was a 7200.12 or some other decimal after the 7200). The OS in installed to the Raptor and I am just using the Barracuda for storage. With this setup, in case you couldn't guess already, the Raptor fills up quick and I am constantly having to maintain file locations. And although it is nice to have that quicker boot time and program loading, the time spent maintaining the drive makes me waste more time overall. So I am looking for a way to try to keep it clear while still keeping up system loading speeds. A performance hit on games and such is easily acceptable and as long as I can guarantee a 5GB space on the Raptor, I can always just temporarily move the disc image there. So I am figuring that having games installed like Boarderlands and Mass Effect, as well as having large files such as linux distro DVD disc images in My Documents, I probably should be moving my personal files and Program Files directories to the Barracuda. I currently have folders on the Barracuda for this, but this means routinely copying files over and I can't really do anything with the Program Files folder that already exists. The best I can do is remember to designate the install directory of any program installation to the alternative install directory, which I can't seem to get to ever work right with Steam. With that in mind, is there a way that is not too drastic to let me just change some folders and system settings once and everything works fine afterwards for my setup? I have considered just reinstalling Windows 7 to the Barracuda but that would defeat the purpose of the Raptor except for running disc images off of. I am also heard a bit about being able to use symlinks to fix this, but I have also heard that symlinks in Windows are not necessarily the same and not as well supported on Windows. An example a friend mentioned was something about how if you have a symlink in Windows on a small hard drive to a large hard drive and the contents the symlink points to is larger than the small hard drive's capacity, then Windows will think the smaller hard drive is full. So is there a fix/workaround that will let me use symlinks across hard drives without the issues or is there a better solution I am not being told about, not mentioning, or not thinking of?

  Read the article

• nginx proxypath https redirect fails without trailing slash

  - by Thermionix

  I'm trying to setup Nginx to forward requests to several backend services using proxy_pass. The links on the pages that lack trailing slashes do have https:// in front, but get redirected to a http request with a trailing slash - which ends in connection refused - I only want these services to be available through https. So if a link is too https://example.com/internal/errorlogs in a browser when loaded https://example.com/internal/errorlogs gives Error Code 10061: Connection refused (it redirects to http://example.com/internal/errorlogs/) If I manually append the trialing slash https://example.com/internal/errorlogs/ it loads I've tried with varied trailing forward slashes appended to the proxypath and location in proxy.conf to no effect, have also added server_name_in_redirect off; This happens on more than one app under nginx, and works in apache reverse proxy Config files; proxy.conf location /internal { proxy_pass http://localhost:8081/internal; include proxy.inc; } .... more entries .... sites-enabled/main server { listen 443; server_name example.com; server_name_in_redirect off; include proxy.conf; ssl on; } proxy.inc proxy_connect_timeout 59s; proxy_send_timeout 600; proxy_read_timeout 600; proxy_buffer_size 64k; proxy_buffers 16 32k; proxy_pass_header Set-Cookie; proxy_redirect off; proxy_hide_header Vary; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_set_header Accept-Encoding ''; proxy_ignore_headers Cache-Control Expires; proxy_set_header Referer $http_referer; proxy_set_header Host $host; proxy_set_header Cookie $http_cookie; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Ssl on; proxy_set_header X-Forwarded-Proto https; curl output -$ curl -I -k https://example.com/internal/errorlogs/ HTTP/1.1 200 OK Server: nginx/1.0.5 Date: Thu, 24 Nov 2011 23:32:07 GMT Content-Type: text/html;charset=utf-8 Connection: keep-alive Content-Length: 14327 -$ curl -I -k https://example.com/internal/errorlogs HTTP/1.1 301 Moved Permanently Server: nginx/1.0.5 Date: Thu, 24 Nov 2011 23:32:11 GMT Content-Type: text/html;charset=utf-8 Connection: keep-alive Content-Length: 127 Location: http://example.com/internal/errorlogs/

  Read the article

• Server load spikes several times a day, load average for the past month is 5 times the load average all year

  - by AMF

  My Munin notifications set up for our (Debian) LAMP cluster have been notifying me continuously that our load on our production machine has been at dangerous levels. While the average load all year typically runs between 2 and 8, the load in the past month and only the past month -- has been skyrocketing to 10, 18, and occasionally even 50-60. The spikes last only 5-10 minutes at a time and occur about every 2-3 hours. The spikes do not effect performance only because I have a script that sends traffic off our server to a mirror CDN when the load goes above 10. I've looked for cron jobs that correlate with this timeframe but there is nothing I can see that would cause this. Site traffic is also normal (we receive about 200K visits per day). I'm also trying to think of anything I've changed around the time this problem began, and I really cannot think of anything. This is probably not much to go on. Maybe there is a clue in the top print-out (below) that I'm not seeing. How do I proceed to find the cause? -- Typical top when the load is NOT spiking: top - 11:13:09 up 472 days, 25 min, 1 user, load average: 6.08, 4.29, 3.80 Tasks: 105 total, 1 running, 104 sleeping, 0 stopped, 0 zombie Cpu(s): 41.2%us, 5.8%sy, 0.0%ni, 49.5%id, 2.7%wa, 0.1%hi, 0.7%si, 0.0%st Mem: 3369592k total, 2166980k used, 1202612k free, 559504k buffers Swap: 2650684k total, 1892k used, 2648792k free, 1129116k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 32046 apache 15 0 36300 12m 9828 S 20 0.4 0:01.97 apache2 32679 apache 15 0 36568 13m 10m S 19 0.4 0:01.69 apache2 31441 apache 15 0 36616 13m 10m S 19 0.4 0:04.13 apache2 31477 apache 15 0 36596 13m 9.8m S 15 0.4 0:01.99 apache2 31993 apache 15 0 36876 16m 12m S 12 0.5 0:02.01 apache2 31782 apache 15 0 36836 14m 10m S 8 0.4 0:02.17 apache2 32198 apache 15 0 36536 13m 10m S 7 0.4 0:01.59 apache2 880 apache 15 0 36508 9708 6236 S 7 0.3 0:00.42 apache2 31945 apache 17 0 36876 16m 13m S 5 0.5 0:03.17 apache2 32197 apache 16 0 36636 10m 7504 S 5 0.3 0:02.70 apache2 32326 apache 15 0 37024 11m 7632 S 5 0.3 0:02.15 apache2 32565 apache 15 0 37280 13m 9.8m S 5 0.4 0:03.75 apache2 32676 apache 15 0 36896 16m 12m S 4 0.5 0:00.95 apache2 32678 apache 15 0 36536 12m 9692 S 4 0.4 0:02.27 apache2 974 apache 16 0 37064 9888 6016 D 4 0.3 0:00.13 apache2 32150 apache 16 0 36832 13m 10m S 3 0.4 0:01.74 apache2 31780 apache 16 0 36848 11m 7660 S 3 0.3 0:02.87 apache2

  Read the article

• Slow Windows Explorer on Windows 7

  - by MadBoy

  I have Laptop with i7 (4 cores), 8GB ram and SSD OCZ Vertex 3 MaxIOPS which in testing that I did just now does 400mb/s+ read/write. However the responsiveness of Windows Explorer is far from being perfect. Opening up Computer, Documents, going into folders is very slow (1-5seconds). I don't have any viruses or spyware and I have tried changing properties to optimize view for General Items. I tried disabling Search Indexer but it made search in Outlook 2010 crawl and didn't bring any other effect. Even double clicking on file takes some time to open things up (like clicking a Word document). I don't have any drives mapped, my computer is not joined to domain. I have multiple VPN connections that I connect to but they all have disabled default gateways. I tried using CC Cleaner or some Windows 7 Tweaks app to disable some things. I am power user using Visual Studio, Tortoise SVN and other developer/administration apps. Any non obvious ideas? Edit: So I've been trying to pinpoint where the issue comes from and it seems that straight after reboot Windows Explorer opens very fast, when I load 3-4 programs (Royal TS, Visual Studio, Outlook) it's noticeably slower and the more programs I have it gets worse. After I start closing programs it starts working better and if I leave 2 open it's fast again. I tried doing some research with DiskMon and other programs from sysinternals but couldn't find anything suspicious. Below are stats during normal usage with a lots of programs open: - Ram usage with a lot of programs open and no swap file (i disabled it for testing): 6.95GB - CPU usage: 15%, none of the cores takes more then 50% (I have VS 2010 open x 4) HD Tune Pro: OCZ-VERTEX3 MI Benchmark Test capacity: full Read transfer rate Transfer Rate Minimum : 363.9 MB/s Transfer Rate Maximum : 505.5 MB/s Transfer Rate Average : Access Time : Burst Rate : CPU Usage : HD Tune Pro: OCZ-VERTEX3 MI File Benchmark Drive C: Transfer rate test File Size: 500 MB Sequential read 484102 KB/s Sequential write 444714 KB/s Random read 7779 IOPS Random write 16888 IOPS Random read (queue depth = 32) 73007 IOPS Random write (queue depth = 32) 69790 IOPS HD Tune Pro: OCZ-VERTEX3 MI Random Access Test capacity: full Read test Transfer size operations / sec avg. access time max. access time avg. speed 512 bytes 3260 IOPS 0.306 ms 2.106 ms 1.592 MB/s 4 KB 4161 IOPS 0.240 ms 2.006 ms 16.256 MB/s 64 KB 2382 IOPS 0.419 ms 2.367 ms 148.934 MB/s 1 MB 449 IOPS 2.225 ms 4.197 ms 449.407 MB/s Random 809 IOPS 1.235 ms 6.551 ms 410.527 MB/s HD Tune Pro: OCZ-VERTEX3 MI Extra Tests Test capacity: full Random seek 3975 IOPS 0.252 ms 1.941 MB/s Random seek 4 KB 4245 IOPS 0.236 ms 16.583 MB/s Butterfly seek 4086 IOPS 0.245 ms 1.995 MB/s Random seek / size 64 KB 3812 IOPS 0.262 ms 58.606 MB/s Random seek / size 8 MB 120 IOPS 8.348 ms 485.737 MB/s Sequential outer 4524 IOPS 0.221 ms 282.721 MB/s Sequential middle 4429 IOPS 0.226 ms 276.818 MB/s Sequential inner 5504 IOPS 0.182 ms 344.000 MB/s Burst rate 4472 IOPS 0.224 ms 279.475 MB/s

  Read the article

• Messages stuck in SMTP queue - Exchange 2003

  - by Diav

  I need your help people ;-) I have a problem with messages coming into our Exchange Server and ones going out through it. Basically, the messages are stuck in the SMTP queue. A message will come into the server, I can see it listed under "Exchange System Manager", but if you list the properties of the message queue it says something like 00:10 SMTP Message queued for local delivery 00:10 SMTP Message delivered locally to [email protected] 00:10 SMTP Message scheduled to retry local delivery 00:11 SMTP Message delivered locally to [email protected] 00:11 SMTP Message scheduled to retry local delivery etc etc For outgoing message list looks like this: 10:55 SMTP: Message Submitted to Advanced Queuing 10:55 SMTP: Started Message Submission to Advanced Queue 10:55 SMTP: Message Submitted to Categorizer 10:55 SMTP: Message Categorized and Queued for Routing 10:55 SMTP: Message Routed nad Queued for Remote Delivery And the end - since then status didn't change, message is in queue, I am forcing connection from time to time but without an effect. I checked connection with smarthost (used telnet for that) and everything seems to work correctly, so the problem is probably on exchange side. I am using Exchange Server 2003 running on Small Business Server 2003. I don't have any antivirus installed on server. Remaining free space on each partition is over 3Gb, on partition with data bases - it is over 12Gb. All was working good and without problems since 2005, problems started in half of this june - messages started going out and being stuck almost randomly (I don't see a pattern yet, some are going out, some are not, some are going after several hours). I don't know what to do, what to check more, so please, any ideas? Best regards, D. edit Priv1.edb has 14,5GB and priv1.stm 2,6GB - together those files have more than 16GB - can it be the reason? If yes, then what? Indeed, I haven't thought that it can have something in common with my problem, but several users reported recent problems with Outlook Web Access - they can log in, they see the list of their mails, but they can't see the content of their emails. Although when they are connecting with Outlook 2003/2007 - there is no such problem, only with OWA there is. edit2 So,.. It works now, and I have to admit that I am not really sure what the problem was (hope it won't come back). What have I done: Cleaned up some mailboxes to reduce size of them Dismounted Information Store Defragmentated data base files ( I used eseutil: c:\program files\exchsrvr\bin eseutil /d g:\data base\Exchsrvr\MDBDATA\priv1.edb ) Mounted Information Store back ..and before I managed to do anything else - my queue started moving, elements which were kept there already for days - started moving and after few minutes everything was sent, both, outside and locally. But: priv1.edb is still big (13 884 203 008), priv1.stm as well (2 447 384 576), so this is probably not the issue of size of the file. And if not this, so what was that? And if that was issue of size of the file, then soon it will repeat - is there something I can do to avoid it ?

  Read the article

• How to troubleshoot performance issues of PHP, MySQL and generic I/O

  - by jbx

  I have a WordPress based website running on a shared hosting. Its response time is very decent (around 2s to retrieve the HTML page and 5s to load all the resources). I was planning to move it to a dedicated virtual server (Ubuntu 12.04 LTS), which should theoretically improve things and make them more consistent given its not shared. However I observed severe performance degredation, with the page taking 10seconds to be generated. I ruled out network issues by editing /etc/hosts on the server and mapping the domain to 127.0.0.1. I used the Apache load tester ab to get the HTML, so JS, CSS and images are all excluded. It still took 10 seconds. I have Zpanel installed on the server which also uses MySQL, and its pages come up quite fast (1.5s) and also phpMyAdmin. Performing some queries on the wordpress database directly through phpMyAdmin returns them quite fast too, with query times in the 10 to 30 millisecond region. Memory is also sufficient, with only 800Mb being used of the 1Gb physical memory available, so it doesn't seem to be a swap issue either. I have also installed APC to try to improve the PHP performance, but it didn't have any effect. What else should I look for? What could be causing this degradation in performance? Could it be some kind of I/O issue since I am running on a cloud based virtual server? I wish to be able to raise the issue with my provider but without showing actual data from some diagnosis I am afraid he will just blame my application. UPDATE with sar output (every second) when I did an HTTP request: 02:31:29 CPU %user %nice %system %iowait %steal %idle 02:31:30 all 0.00 0.00 0.00 0.00 0.00 100.00 02:31:31 all 2.22 0.00 2.22 0.00 0.00 95.56 02:31:32 all 41.67 0.00 6.25 0.00 2.08 50.00 02:31:33 all 86.36 0.00 13.64 0.00 0.00 0.00 02:31:34 all 75.00 0.00 25.00 0.00 0.00 0.00 02:31:35 all 93.18 0.00 6.82 0.00 0.00 0.00 02:31:36 all 90.70 0.00 9.30 0.00 0.00 0.00 02:31:37 all 71.05 0.00 0.00 0.00 0.00 28.95 02:31:38 all 14.89 0.00 10.64 0.00 2.13 72.34 02:31:39 all 2.56 0.00 0.00 0.00 0.00 97.44 02:31:40 all 0.00 0.00 0.00 0.00 0.00 100.00 02:31:41 all 0.00 0.00 0.00 0.00 0.00 100.00 My suspicion that this comes from I/O related issue is also because a caching plugin I use to reduce the amount of queries to the database, by precompiling PHP pages is actually making things worse instead of better. It seems that file access is making things worse instead.

  Read the article

• DNS and DHCP dies after ~2 days of use on ClearOS

  - by TheLQ

  I'm using ClearOS (based on CentOS, so any info specific to it should apply here) as a gateway, DHCP, and DNS server. I had this server running perfectly for a month or two before replacing it with another server. However due DNS and DHCP failing 2 days in and a host of other performance issues (the box was a little underpowered), I changed back to the origional server. However 2 days in DHCP and DNS are failing again, and I'm out of idea's on why. In both cases to my knowledge no network or server changes occurred after installation. Right after installing (and at least a day in) DNS and DHCP was working just fine. However later (Day 2) I get a call saying their internet is down (translation: Nobody can get to websites because DNS is down) I've tried to fix the problem by checking if the dnsmasq is even running (it is), restarting the service, and restarting the server to no effect. I do have two internal servers that have static DHCP leases but one's lease must of expired as I can't connect to it anymore. I'm hesitant to do any dhcp testing on the last server as I'll not be able to connect to it anymore. Is there anything anyone can think of on why DNS and DHCP would fail 2 days in to running perfectly? More info: Running dnsmasq in debug mode. This is all that's displayed even when running nslookup quackwall. I'm not sure though if nslookup commands should show up in the log [root@quackwall ~]# /usr/sbin/dnsmasq -dq dnsmasq: started, version 2.49 cachesize 150 dnsmasq: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP dnsmasq-dhcp: DHCP, IP range 10.0.0.100 -- 10.0.0.254, lease time 12h dnsmasq: reading /etc/resolv.conf dnsmasq: using nameserver 74.128.17.114#53 dnsmasq: using nameserver 74.128.19.102#53 dnsmasq: read /etc/hosts - 5 addresses dnsmasq-dhcp: read /etc/ethers - 2 addresses On the other server DNS and the Gateway are all configured correctly (10.0.0.2 is quackwall) lordquackstar@quackgame:~$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.0.0.0 0.0.0.0 255.255.240.0 U 0 0 0 eth0 0.0.0.0 10.0.0.2 0.0.0.0 UG 0 0 0 eth0 lordquackstar@quackgame:~$ cat /etc/resolv.conf nameserver 10.0.0.2 domain highwow.lan search highwow.lan

  Read the article

• USB mouse disconnecting and reconnecting randomly and often

  - by Marc

  Specs: Q6600, evga 780I sli mobo, 4gig RAM, logitech MX518, windows 7 64bit, evga gtx 260, 650W power supply (single rail) The problem I am having is my mouse will reconnect/disconnect (will even hear the sounds from windows) and the light on the bottom of the mouse will turn off/turn on as it starts working again. It really sucks to be playing a game (and happens on desktop as well) for the mouse to just die out for a few seconds and come back. Sometimes it will not happen for days and other times it will do it 2 or more times within 15 seconds. I have tried two different wired mice, have tried multiple USB ports (on front of computer, back of computer, have also used a USB hub and have also plugged in a card that connects to the USB connectors on the motherboard and adds a few usb ports to the back of the computer, and I also bought a USB 2.0 PCI card and that did not help). Nothing else seems to reconnect like this, my usb keyboard has never once cut out like the mouse does and neither have any of the other devices I have connected (webcam, usb hub, various devices sometimes connected through usb cables, and IR reciever for windows media center remote). I have disconnected all usb devices except for my keyboard and mouse and the problem still occurs. I guess it could be something wrong with my motherboard but since no other devices behave similarly I'm just hoping that it is some kind of driver conflict. Installing logitech's drivers has had no effect. It seemed at first that if I go to device manager and uninstall HID-compliant mouse (that and logitech mx518 are listed) that would fix it but it doesn't seem to work anymore or at least not every time (it keeps reinstalling). I have googled "usb mouse disconnects and reconnects" and it seems to be fairly common but none of those were resolved. To stick some easy steps: It happens with or without the drivers installed It has happened with multiple mice on the same computer Bios is the latest version (P08) Motherboard drivers are the latest version Device manager is listing no problems on any USB devices Happens with every usb port, even addon usb cards Happens when all usb devices aside from mouse and keyboard are unplugged I read that maybe it is an IRQ conflict and I tried to look into that but did not really know what was going on, but didn't see anything obviously wrong. Thanks for any help guys, its driving me crazy!

  Read the article

• How can I prevent an unintentional DDOS running ColdFusion 8 with IIS 6?

  - by Eric Belair

  We had an interesting outage today on one of our client's websites. Out of nowhere, the website was inaccessible. The website runs by itself on a dedicated physical Windows 2000 server (probably overkill, I know, but that's a discussion for a different day). After restarting IIS and ColdFusion Application Service, the problem came back several times. My initial thought was that it was a DNS issue, which happens occasionally - the last time it happened was after Hurricane Sandy when we our ISP was out, and we had to make some network config changes. But, it was not a DNS issue. My second thought was that it was a DDOS attack, but, there's very little reason anyone would want to take this site down. When we called our ISP, the operator on the other end noted that traffic was spiking significantly. As it turned out, the client had unintentionally caused a DDOS on the website, after they FTPed a very large video file, and then mass emailed a link to it. Hundreds of people clicked the link and brought the site to its knees. I am primarily a Website Programmer, but I often have to contribute to server administration at times. Sadly, I'm the resident ColdFusion and IIS expert, but I don't have a lot of experience with this issue. What are some basic steps that I can take to prevent this from happening in the future, since we cannot always control what files the client posts to the website. Here are some ideas I had, but I'm unsure of the impact: Limit the number of connections in IIS. Put media files on a separate server (like an Amazon site, etc.). File requests of this type currently behind a server-script (i.e. /www.site.com/viewFile.cfm?fileId=1424545, where the fileId references a file off the webroot) that logs requests, and pushes the file to the browser using CFCONTENT. I could edit this script to reject requests when they exceed a certain amount in a given time-frame (i.e. a 5MB can be accessed globally 10 times in an hour). This may cause some users frustration, but, if hundreds of users are attempting to view the file, the site is going to crash anyways, as it did today, which is way more frustrating, since there is no "pretty" message explaining why they can't get to the file. I'm open to any suggestions, as I'm continuing my research to report to the CTO with the best options, so that we can put a solution into effect. Thank you.

  Read the article

• keyboard mappings are totally screwed after updating to kde4

  - by zeonglow

  I recently upgraded from KDE 3.5 to KDE 4, and I have been having weird issues with my keyboard. In one of the virtual consoles e.g. when I press ctrl + alt 1 , I can type perfectly, but in KDE, several of the number keys don't work, the left and right arrows don't work either. When I press the right arrow key in xev I get this: KeyRelease event, serial 34, synthetic NO, window 0x3600001, root 0x6f, subw 0x0, time 903459, (111,55), root:(115,836), state 0x10, keycode 114 (keysym 0x1008ff11, XF86AudioLowerVolume), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False When I press the '3' key it toggles my Bookmarks toolbar in Firefox, in xev I get this: KeyPress event, serial 34, synthetic NO, window 0x3600001, root 0x6f, subw 0x0, time 999968, (94,115), root:(98,896), state 0x10, keycode 12 (keysym 0x1008ff30, XF86Favorites), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 34, synthetic NO, window 0x3600001, root 0x6f, subw 0x0, time 1000032, (94,115), root:(98,896), state 0x10, keycode 12 (keysym 0x1008ff30, XF86Favorites), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False As this is deeper down, changing the type of keyboard in the KDE meun's has no effect. I'm slowly beginning to wade through the mountains of documentation about the X keyboard model, but there has to be a better way. Does anyone no what it is? Edit: 1234567890 ! after deleting the entire .kde folder. but only until I change the Keyboard settings from the "system settings" applet, then its hosed full time. Regardless of what I set the settings too. (restore to default settings doesn't) 2nd Edit: I'm using Gentoo AMD64, I was upgrading from KDE 3.5 KDE 4.2. I think I had manual settings before, although I didn't change anything. I was originally running KDE without HAL until that stop working a year or so ago. The only customisation I made was to set the multimedia keys to control Amarok. 3rd Edit $ grep xkb /var/log/Xorg.0.log (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" Xorg.0.log has this to say: (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Mouse1 (WW) Disabling Keyboard1 My Xorg.conf has this in it. Identifier "Keyboard1" Driver "kbd" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "gb"

  Read the article

• Windows: Impact of clean install Service Pack 2 to applications & data?

  - by Thomas Matthews

  My Windows Vista Home Premium system is corrupt and won't install Service Pack 2. I have followed all the advice from Microsoft and still no luck. I would like to perform a clean install of Vista, then SP1, and then SP2. My concern is the effect of the clean install on the registry, my apps and all my data. My plan: 1. Download Vista Service Pack 1 (SP1) ISO and write to DVD. 2. Download Vista Service Pack 2 (SP2) ISO and write to DVD. 3. Backup all data, applications and registry to external hard drive (file copy not disk image) 4. ?? Format hard drive?? (is this necessary?) 5. Install Vista from DVDs / CDs. 6. Install SP1 from DVD 7. Install SP2 from DVD 8. Restore registry, applications and data from external hard drive. My questions: 1. Is formatting the hard drive a necessary step? 2. Will restoring the registry from the backup corrupt the system? 3. Should I use Windows Backup or ZIP/RAR? 4. Any gotcha's that I should look out for? Background: I am using Windows Vista Home Premium with SP1. The sfc program does not finish due to a resources problem (even when run as administrator). I have 5 users on it. After a while, the screen goes black and shows an error message window about an error with login.scr. Standard accounts display a black screen and can't run any applications. Administrative accounts have no problems (even standard accounts when converted to Administrative have no problem). The CBS log contains a lot of 0x8000ffff and E_UNEXPECTED errors (which Microsoft defines as catastrophic failure). This is the reasoning behind performing a clean install up to service pack 2.

  Read the article

• Cannot exit X server, restart, shutdown or drop to tty when VGA monitor active

  - by terdon

  I have a strange problem. If I connect an external VGA monitor to my laptop, exiting the X environment in any way crashes the computer. For example, say I am working with my two monitors (the laptop's and one connected to my VGA port) active. Hitting Ctrl+Alt+F Key should take me down to a tty. What actually happens is that the VGA screen goes blank, as you would expect, but the laptop screen, although still on, shows nothing. I know the screen is on because it is slightly more illuminated than when it is off. When in this state, I can do nothing to regain access to the machine. I have tried: Ctrl+F Key (and even Ctrl+Alt+F Key, just in case) combinations and none seem to have any effect. Ctrl+Alt+Del : Nothing Magic SysRq key: Nothing Blindly typing my username and password and trying to reboot/shutdown or restart GDM or MDM: Nothing The only thing that works is a hard reset. The exact same behavior occurs when kiling the X server through Ctrl+Alt+Backspace, rebooting or shutdown. There is no difference if I reboot/shutdown/log out using the WM's graphical menu or if I use the shutdown or rebootcommands. It is also not WM-dependent. I have the same problem using Cinnamon, Gnome 3, MATE and xfce4. It is, however, VGA dependent. I have tried connecting another VGA monitor and have the same problem. I do not, however, have this problem if a screen is connected to the DisplayPort. It is, therefore, a VGA specific issue. To make things even stranger, this only occurs when both screens are active. If either the laptop screen or the VGA monitor is inactive the problem goes away. Finally, this problem arose when I installed the latest Linux Mint Debian (LMDE). It did not occur with the previous release of LMDE. I am not sure what has changed since I used the same kernel version in both releases (I had upgraded the kernel while on the previous release) and, I think, the same nvidia drivers. Oh, and yes, I have updated the nvidia driver. Hardware: Dell M4500 laptop CPU: Intel Core i7 RAM: 8GB Graphics: nVidia GT216 [Quadro FX 880M] Software: LMDE, kernel 3.2.0-2-amd64 Xorg: 1.11.4 nVidia kernel: 295.20-1+3.2.9-1 Possibly relevant files: /var/log/Xorg.0.log ~/.xsession-errors Does anyone have any ideas how to fix this? Thanks in advance for any help.

  Read the article

• Areca 1280ml RAID6 volume set failed

  - by Richard

  Today we hit some kind of worst case scenario and are open to any kind of good ideas. Here is our problem: We are using several dedicated storage servers to host our virtual machines. Before I continue, here are the specs: Dedicated Server Machine Areca 1280ml RAID controller, Firmware 1.49 12x Samsung 1TB HDDs We configured one RAID6-set with 10 discs that contains one logical volume. We have two hot spares in the system. Today one HDD failed. This happens from time to time, so we replaced it. Upon rebuilding a second disc failed. Normally this is no fun. We stopped heavy IO-operations to ensure a stable RAID rebuild. Sadly the hot-spare disc failed while rebuilding and the whole thing stopped. Now we have the following situation: The controller says that the raid set is rebuilding The controller says that the volume failed It is a RAID 6 system and two discs failed, so the data has to be intact, but we cannot bring the volume online again to access the data. While searching we found the following leads. I don't know whether they are good or bad: Mirroring all the discs to a second set of drives. So we would have the possibility to try different things without loosing more than we already have. Trying to rebuild the array in R-Studio. But we have no real experience with the software. Pulling all drives, rebooting the system, changing into the areca controller bios, reinserting the HDDs one-by-one. Some people are saying that the brought the system online by this. Some are saying that the effect is zero. Some say, that they blew the whole thing. Using undocumented areca commands like "rescue" or "LeVel2ReScUe". Contacting a computer forensics service. But whoa... primary estimates by phone exceeded 20.000€. That's why we would kindly ask for help. Maybe we are missing the obvious? And yes of course, we have backups. But some systems lost one week of data, thats why we'd like to get the system up and running again. Any help, suggestions and questions are more than welcome.

  Read the article

• My computer's dying :(

  - by j-t-s

  Hi All I have a sweet computer and have never had any real problems with it until now. I recently formatted my computer and all was well. But now my monitor randomly flickers. The monitor will just go black for about a second or two, then it'll return back to its normal state with all the stuff still on the screen. This is getting progressively worse. Another problem that has started is my computer randomly restarts. (I've managed to prevent it from restarting by removing the check in Automatically Restart from the Startup and Recovery Dialog. But I know this doesn't solve the problem). It also completely freezes up on me. One last thing, this morning I got a big blue screen. I can't remember what it said, but if it happens again I will take note of it and repost. Or if I can find some kind of a log file containing that bluescreen error I will post. I have checked all cords, and they're all fine. Nothing's loose. My computer isn't overheating either. I've taken the case off for 3 whole days and haven't used the computer for those 3 days, which has had no effect. I've checked the connections inside and nothing's loose there either. I know there's nothing wrong with my monitor because my friend has 2 computers and it works perfectly on those computers. I don't understand how my computer could suddenly become so unstable. I'm almost certain that I have no viruses; I full-scan my pc everyday for nastys, and have strict firewall settings. Anyway, I don't see how it could be a virus anyway simply due to the fact that I had these problems right after I formatted, and before I even had the chance to install or copy anything or even connect to the internet. I know it has nothing to do with the way I formatted the computer too, I've been fixing computers for years. Sorry for rambling on, just making sure I don't leave anything out. Has anybody else had this problem? Can somebody please try to help me with this? Thank you :)

  Read the article

• Force Finder to log in as Guest to a SMB share

  - by slhck

  I have a QNAP NAS that offers a few SMB shares. As I'm in a trusted environment, my shares are accessible as guest rather than with a combination of username and password. Problem Now, when I click the name of the device in Finder's sidebar, I get the black "Connection failed" bar, with the option "Connect as...". When I click that, I receive: I can however press ? + K and enter the server's name manually, which gets me to this window: Here, I have to select "guest". Now, I can select one of the shares to connect to, and I'm finally connected to the server. If I select it in the sidebar, I get a list of all shares available, because I'm connected as "guest", obviously: What I need Well, as soon as I unmount all shares, I have to go through the same procedure of manually logging in as "guest" again, which I find quite annoying. Is there any way I could get Finder (or the underlying SMB client) to know which credentials to use? Or should I look for the solution rather on the server side? (I know that other SMB shares seem to work fine in my network) Diagnostics The only thing I can get out of Console.app is: 5/15/11 7:36:40 PM /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[200] SharePointBrowser::handleOpenCallBack returned 64 This message occurs when I click the name of the SMB server in the Finder sidebar. Here's the output of `smbclient -L meredith -U guest -d=2 charon:~ werner$ smbclient -L meredith -U guest -d=2 added interface ip=192.168.100.11 bcast=192.168.100.255 nmask=255.255.255.0 tdb(unnamed): tdb_open_ex: could not open file /private/var/samba/gencache.tdb: Permission denied Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Password: Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Sharename Type Comment --------- ---- ------- music Disk movies Disk photos Disk software Disk archive Disk backups Disk IPC$ IPC IPC Service (NAS Server) Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Server Comment --------- ------- Workgroup Master --------- ------- WORKGROUP MEREDITH Also, things I've tried: There is no relevant entry in the Keychain (but why would it, I'm only connecting as guest) Connecting with user name "Guest" and empty password logs me in but still after ejecting the last share, I get the same "Connection failed" error as before. The appropriate entry is made in the Keychain but obviously has no effect.

  Read the article

• Force Finder to log in as Guest to a SMB share

  - by slhck

  I have a QNAP NAS that offers a few SMB shares. As I'm in a trusted environment, my shares are accessible as guest rather than with a combination of username and password. Problem Now, when I click the name of the device in Finder's sidebar, I get the black "Connection failed" bar, with the option "Connect as...". When I click that, I receive: I can however press ? + K and enter the server's name manually, which gets me to this window: Here, I have to select "guest". Now, I can select one of the shares to connect to, and I'm finally connected to the server. If I select it in the sidebar, I get a list of all shares available, because I'm connected as "guest", obviously: What I need Well, as soon as I unmount all shares, I have to go through the same procedure of manually logging in as "guest" again, which I find quite annoying. Is there any way I could get Finder (or the underlying SMB client) to know which credentials to use? Or should I look for the solution rather on the server side? (I know that other SMB shares seem to work fine in my network) Diagnostics The only thing I can get out of Console.app is: 5/15/11 7:36:40 PM /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[200] SharePointBrowser::handleOpenCallBack returned 64 This message occurs when I click the name of the SMB server in the Finder sidebar. Here's the output of `smbclient -L meredith -U guest -d=2 charon:~ werner$ smbclient -L meredith -U guest -d=2 added interface ip=192.168.100.11 bcast=192.168.100.255 nmask=255.255.255.0 tdb(unnamed): tdb_open_ex: could not open file /private/var/samba/gencache.tdb: Permission denied Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Password: Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Sharename Type Comment --------- ---- ------- music Disk movies Disk photos Disk software Disk archive Disk backups Disk IPC$ IPC IPC Service (NAS Server) Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Server Comment --------- ------- Workgroup Master --------- ------- WORKGROUP MEREDITH Also, things I've tried: There is no relevant entry in the Keychain (but why would it, I'm only connecting as guest) Connecting with user name "Guest" and empty password logs me in but still after ejecting the last share, I get the same "Connection failed" error as before. The appropriate entry is made in the Keychain but obviously has no effect.

  Read the article

• How might I stop BACKSCATTER using Qmail?

  - by alecb

  New to ServerFault , please pardon if my details are too much Linux box acting as Virtual Host for domain hosting. Runs CentOs. Runs Parallels Plesk 9.x Regardless of the following, the SPAM keeps flowing in at 1-3 / second. An explanation of the problem... "xinetd service listens for SMTP connections and forwards to qmail-smtpd. The qmail service only process the queue, but does not control messages coming into the queue...that's why stopping it has no effect. If you stop xinetd AND qmail, then kill any open qmail-smtpd processes, all mail flow comes to a stop SOMETIMES Problem is, qmail-smtpd is not smart enough to check for valid mailboxes on the localhost before accepting the mail. So, it accepts bad mail with a forged replyto address which gets processed in the queue by qmail. Qmail cannot deliver locally and bounces to the forged replyto address." We believe the fix is to patch the qmail-smtpd process to give it the intelligence to check for the existence of local mailboxes BEFORE accepting the message. The problem is when we try to compile the chkuser patch we run into failures due to Plesk Control Panel." Is anyone aware of something we could do differently or better?" Other things that have NOT worked thus far: -Turning off any and all mail processes (to check as an indicator that an individual account has been compromised. This has been verified as NOT the case.) -Turning off mail AND http server processes (in the case of a compromised formmail) -Running EXIM in lieu of Qmail( easy/quick install but xinetd forces exim to close and restarts qmail on its own) -Turned on SPF protection via Plesk GUI. Does not help. -Turned on Greylisting via Plesk GUI. Does not help. -Disabled Bounce notifications via command line That which MIGHT work but have complications: -Use POSTFIX instead of QMAIL (No knowledge of POSTIFX and don't want to bother with it unless anyone knows it has potential to handle backscatter WELL before investing time) -As mentioned above, compiling a chkusr patch, we believe will STOP this problem, along with qmail (because of plesk in the mix, the comile fails every time and Parallels Plesk support is unresponsive unless I cough up MONEY) If I don't clear out the SPAM from the outgoing mail queue nightly, then it clogs up with millions of SPAMs and will bring down the OUTGOING email services. Any and all help welcome and appreciated!

  Read the article

• Avoid read-write access to bad sectors on HDD to continue working on the HDD

  - by goldenmean

  I have a HP Pavilion dv6446 notebook. It had Windows Vista Home premium. After 4.5+ years of usage, just recently it started malfunctioning. While working fine, its screen goes white or sometimes some thin black lines horizontally. Laptop freezes. Hard reboot works. Again it works for some 2 hrs or so, same error. To diagnose I did run the Memory and Hard disk check which is present in the Bios Setup. Memory test passed. Hard disk test returned an error saying something like - "Replace the hard disk". Bad.. Some sectors or platters have gone bad on the disk. (I confirmed this later by further tests mentioned below) Then I tried installing a Ubuntu 11.10. It listed 3 partitions /dev/sda1, sda2, sda2. It again gave error and could not install grub loader on /dev/sda1. Bad sectors. Then redid the Ubuntu installation, this time asked to to install the Ubuntu on /dev/sda3. and kept /dev/sda1 for /home. Installed fine, and works fine as well. Due to unavailability of WiFi/ Ethernet driver for that adapters under Ubuntu( at least I could not configure them and get the networking working at all), I decided to go back to reinstall windows Vista. It did install fine. I did not have to format one data partition which has my data. I just formatted one partition which installed Windows So in effect HDD has not undergone a full format here. Worked ok for 1 day. But same white screen and freeze happened. Looks like while it is in use, it accesses the bad sectors for storing some data and that's when it bombs. I am inclined to think HDD has not failed fully or crashed but has developed bad sectors. Else if it was a HDD crash, it would have refused to boot at all let alone install on it. Questions: Is there any HDD test check under windows or any such tools windows/linux based ewhere which can identify the bad sectors of the HDD and 'lock/isolate' them from further read-write access of any kind. If not what are my options, if any to salvage this laptop HDD without replacing it. EDIT: Would the Disk Error checking tool under windows help in any way?

  Read the article

• apcupsd on Linux does not report on APC BackUPS Pro 900

  - by lserni

  From what documentation I could find, the UPS should be (is!) supported by Linux and ought to work with apcupsd. I looked for specific problems such as the infamous Microlink protocol, and found none. I have found a feedback from a guy in UK that reports using this very model on a not-too-different OS version (his OpenSuSE 12.1, mine 12.3 x86_64). The USB port is detected, lsusb reports Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply and lsusb -v -s002:003 confirms and expands: Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x051d American Power Conversion idProduct 0x0002 Uninterruptible Power Supply bcdDevice 0.90 iManufacturer 1 American Power Conversion iProduct 2 Back-UPS RS 900G FW:879.L4 .I USB FW:L4 bNumConfigurations 1 Configuration Descriptor: [...] Interface Descriptor: [...] bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 33 US bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 1134 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 100 Device Status: 0x0000 (Bus Powered) The kernel recognizes this and duly sets up crw------- 1 root root 180, 96 Nov 4 16:11 /dev/usb/hiddev0 As far as I know, everything is as it should be. I have put the standard configuration in /etc/apcupsd/apcupsd.conf (which is Unix-terminated, ASCII-only, no BOM (just in case)) UPSCABLE usb UPSTYPE usb DEVICE (I have also tried commenting out DEVICE, and setting a device of /dev/puppa results in an access attempt to /dev/puppa, not some /var/lib/dev/puppa or /dev/puppa\r\n). Yet, what apcaccess tells me is VERSION : 3.14.10 (13 September 2011) suse CABLE : USB Cable DRIVER : USB UPS Driver UPSMODE : Stand Alone STARTTIME: 2013-11-04 16:24:22 +0100 MODEL : STATUS : NOBATT LINEV : 000.0 Volts LOADPCT : 0.0 Percent Load Capacity BCHARGE : 000.0 Percent TIMELEFT : 0.0 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds SENSE : Low LOTRANS : 000.0 Volts HITRANS : 000.0 Volts It doesn't recognize the model, and reports no battery (and no voltage). This confirms that it's not the Microlink problem, or it would report the battery status, if precious little else. If I disconnect the USB cable, I get an apcupsd message to the effect that communications have been lost; and I get the "communication restored" broadcast too, if I reconnect the cable. apcupsd is monitoring. So everything tells me that it should work -- only it doesn't. Does anyone spot what I'm missing?

  Read the article

• Win7 x64 unresponsive for a minute or so. HD failing?

  - by Gaia

  On a fully updated Win7 x64, every so often the system stalls for a minute or so. This has been going on for a couple months now. By stalling I mean the mouse responds and I can move windows around, but any window, any program, that is open becomes whiteish when I select it AND any new programs will not open. It doesn't matter what kind of program it is. When the stall stops all clicks I made (open new programs for example) take effect. Nothing shows up consistently (as in every time this happens) in the event log. Today though I was able to find something, but it doesn't reveal much other than the "system was unresponsive". It's a 7009 for "A timeout was reached (30000 milliseconds) while waiting for the Windows Error Reporting Service service to connect." It doesn't matter if I have any USB devices plug-in or not. I've ran Microsoft Security Essentials and Malwarebytes. While the machine is unresponsive, I've noticed that Drive D (the other partition on the single internal HD in this laptop) is displayed like this in explorer. This never occurs with Drive C or any other drive on the machine. . SMART report for the physical drive: Read benchmark by HD Tune 5 Pro, probably the most telling piece of the puzzle. Isn't this alone enough to see there is a problem with the drive, regardless of whether the unresponsiveness is caused by such purported problem? Here is a short hardware report: Computer: LENOVO ThinkPad T520 CPU: Intel Core i5-2520M (Sandy Bridge-MB SV, J1) 2500 MHz (25.00x100.0) @ 797 MHz (8.00x99.7) Motherboard: LENOVO 423946U Chipset: Intel QM67 (Cougar Point) [B3] Memory: 8192 MBytes @ 664 MHz, 9.0-9-9-24 - 4096 MB PC10600 DDR3 SDRAM - Samsung M471B5273CH0-CH9 - 4096 MB PC10600 DDR3 SDRAM - Patriot Memory (PDP Systems) PSD34G13332S Graphics: Intel Sandy Bridge-MB GT2+ - Integrated Graphics Controller [D2/J1/Q0] [Lenovo] Intel HD Graphics 3000 (Sandy Bridge GT2+), 3937912 KB Drive: ST320LT007, 312.6 GB, Serial ATA 3Gb/s Sound: Intel Cougar Point PCH - High Definition Audio Controller [B2] Network: Intel 82579LM (Lewisville) Gigabit Ethernet Controller Network: Intel Centrino Advanced-N 6205 AGN 2x2 HMC OS: Microsoft Windows 7 Professional (x64) Build 7601 The drive less than 1 year old. Do I have a defective drive? Seagate Tools diag says there is nothing wrong with the drive... UPDATE: I noticed that the windows error reporting service entered the running state then the stopped state and the space between the two events was exactly 2 minutes. Which error it was trying to report I don't know. I check the "Reliability Monitor" and it shows no errors to be reported. I've disabled the windows error reporting service to see if the problem stops.

  Read the article

• udp expected behaviour not responding to test result

  - by ernst

  I have a local network topology that is structured as follows: three hosts and a switch in the middle. I am using a switch that supports 10,100,1000 Mbit/s full/half duplex connection. I have configured the hosts with a static ip 172.16.0.1-2-3/25. This is the output of ifconfig eth0 Link encap: Ethernet HWaddr ***** inet addr:172.16.0.3 Bcast:172.16.0.127 Mask:255.255.255.128 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 The output on H1 and H2 is perfectly matchable They are mutually reachable since i have tested the network with ping. I have forced the ethernet interface to work at 10M with ethtool -s eth0 speed 10 duplex full autoneg on this is the output of ethtool eth0 supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full S upported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Full Advertised pause frame use: Symmetric A dvertised auto-negotiation: Yes Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: g Wake-on: d Current message level: 0x000000ff (255) drv probe link timer ifdown ifup rx_err tx_err Link detected: yes – I am doing an experimental test using nttcp to calculate the GOODPUT in the case that H1 and H2 at the same time send data to H3. Since the three links have the same forced capability and the amount of arrving data speed is 10 from H1+10 from H2--20M to H3 it would be expected a bottleneck effect and, due to the non reliable nature of udp, a packet loss. But this doesn't appen since the output of nttcp application shows the same number of byte sended and received. this is the output of nttcp on h3 nttcp -T -r -u 172.16.0.2 & nttcp -T -r -u 172.16.0.1 [1] 4071 Bytes Real s CPU s Real-MBit/s CPU-MBit/s Calls Real-C/s CPU-C/s l 8388608 13.74 0.05 4.8848 1398.0140 2049 149.14 42684.8 Bytes Real s CPU s Real-MBit/s CPU-MBit/s Calls Real-C/s CPU-C/s l 8388608 14.02 0.05 4.7872 1398.0140 2049 146.17 42684.8 1 8388608 13.56 0.06 4.9500 1118.4065 2051 151.28 34181.1 1 8388608 13.89 0.06 4.8310 1198.3084 2051 147.65 36623.0 – How is this possible? Am i missing something? Any help will be gratefully apprecciated, Best regards

  Read the article

• Subversion/Hudson/Sonar/Artifactory - too much for my little server to handle! Help!

  - by Ricket

  I have a little dedicated server. It's at a cheap price and has a simple AMD 1800+ (1.5ghz), 256mb DDR RAM, ...need I continue? And I think I'm overloading it already. I have installed the following, and it's running CentOS 5.4: Webmin Apache MySQL Subversion as an Apache module Hudson (standalone) Sonar (standalone, runs with a standalone Jetty install) Artifactory (standalone) That's pretty much it. But I'm having problems; pages are loading quite slowly. Network speed of the server is excellent, but I think I'm just running out of CPU and/or memory. A side-effect of the pages loading slowly is that sometimes Hudson times out, not being able to start Maven or contact Sonar in a certain amount of time. I think the next step to speed things up might be to move to an application server and use the WAR version of Hudson, Sonar and Artifactory together on that server. I don't know that it will help, but it just seems to make sense, especially with Sonar running on its own Jetty install and the other two probably running their own mini application servers as well. Am I correct in thinking this? Is this the right course of action? Any other tips on how to make the server run faster? I can post more data if you'd like, just let me know what else would help you answer my question. Oh, also just to cure any suspicions, I don't have any sort of virus or spyware. I protect my SSH access with DenyHosts (which has blocked 300+ brute forcers in the past few months), and I have confirmed that the top four processes in terms of memory and CPU usage are Sonar, Artifactory, Hudson, and MySQL. Edit: I just thought of another thing that I'd like you to comment on as well: Apache currently has 8 spawned slave processes, taking 42MB of ram apiece. This is not my web server. Is everything else able to function if I shut down Apache? Can you point me towards a tutorial or something on migrating Subversion from Apache into something that might work along with the other three applications, maybe even make Subversion a WAR file or something?

  Read the article

• nginx proxypath https redirects to http

  - by Thermionix

  I'm trying to setup Nginx to forward requests to several backend services using proxy_pass however several pages load with 404s The links on the pages have https:// in front, but result in a http request - which ends in a 404 - I only want these services to be available through https. I've tried with varied trailing forward slashes appended to the proxypath and location in proxy.conf, I've also tried commenting out www.conf (just incase its location blocks could have caused any conflicts) to no effect. So if a link is too https://example.com/sickbeard/errorlogs in a browser when loaded https://example.com/sickbeard/errorlogs gives a 404 in a browser https://example.com/sickbeard/errorlogs/ loads nginx error log; 2011/11/23 14:21:58 [error] 28882#0: *6 "/var/www/sickbeard/errorlogs/recent.html" is not found (2: No such file or directory), client: 192.168.1.99, server: example.com, request: "GET /sickbeard/errorlogs/ HTTP/1.1", host: "example.com" Config files; proxy.conf location /sickbeard { proxy_pass http://localhost:8081/sickbeard; include proxy.inc; } .... more entries .... sites-enabled/main server { listen 80; include www.conf; } server { listen 443; include proxy.conf; include www.conf; ssl on; } www.conf root /var/www; server_name example.com; location / { autoindex off; allow all; rewrite ^/$ /mainsite last; location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { expires max; } location ~ \.php$ { fastcgi_index index.php; include fastcgi_params; if (-f $request_filename) { fastcgi_pass 127.0.0.1:9000; } } } proxy.inc proxy_connect_timeout 59s; proxy_send_timeout 600; proxy_read_timeout 600; proxy_buffer_size 64k; proxy_buffers 16 32k; proxy_pass_header Set-Cookie; proxy_redirect off; proxy_hide_header Vary; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_set_header Accept-Encoding ''; proxy_ignore_headers Cache-Control Expires; proxy_set_header Referer $http_referer; proxy_set_header Host $host; proxy_set_header Cookie $http_cookie; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;

  Read the article

• Why do my Application Compatibility Toolkit Data Collectors fail to write to my ACT Log Share?

  - by Jay Michaud

  I am trying to get the Microsoft Application Compatibility Toolkit 5.6 (version 5.6.7320.0) to work, but I cannot get the Data Collectors to write to the ACT Log Share. The configuration is as follows. Machine: ACT-Server Domain: mydomain.example.com OS: Windows 7 Enterprise 64-bit Edition Windows Firewall configuration: File and Printer Sharing (SMB-In) is enabled for Public, Domain, and Private networks ACT Log Share: ACT Share permissions*: Group/user names Allow permissions --------------------------------------- Everyone Full Control Administrator Full Control Domain Admins Full Control Administrators Full Control ANONYMOUS LOGON Full Control Folder permissions*: Group/user name Allow permissions Apply to ------------------------------------------------- ANONYMOUS LOGON Read, write & execute This folder, subfolders, and files Domain Admins Full control This folder, subfolders, and files Everyone Read, write & execute This folder, subfolders, and files Administrators Full control This folder, subfolders, and files CREATOR OWNER Full control Subfolders and files SYSTEM Full control This folder, subfolders, and files INTERACTIVE Traverse folder / This folder, subfolders, and files execute file, List folder / read data, Read attributes, Read extended attributes, Create files / write data, Create folders / append data, Write attributes, Write extended attributes, Delete subfolders and files, Delete, Read permissions SERVICE (same as INTERACTIVE) BATCH (same as INTERACTIVE) *I am fully aware that these permissions are excessive, but that is beside the point of this question. Some of the clients running the Data Collector are domain members, but some are not. I am working under the assumption that this is a Windows file sharing permission issue or a network access policy issue, but of course, I could be wrong. It is my understanding that the Data Collector runs in the security context of the SYSTEM account, which for domain members appears on the network as MYDOMAIN\machineaccount. It is also my understanding from reading numerous pieces of documentation that setting the ANONYMOUS LOGON permissions as I have above should allow these computer accounts and non-domain-joined computers to access the share. To test connectivity, I set up the Windows XP Mode virtual machine (VM) on ACT-Server. In the VM, I opened a command prompt running as SYSTEM (using the old "at" command trick). I used this command prompt to run explorer.exe. In this Windows Explorer instance, I typed \ACT-Server\ACT into the address bar, and then I was prompted for logon credentials. The goal, though, was not to be prompted. I also used the "net use /delete" command in the command prompt window to delete connections to the ACT-Server\IPC$ share each time my connection attempt failed. I have made sure that the appropriate exceptions are Since ACT-Server is a domain member, the "Network access: Sharing and security model for local accounts" security policy is set to "Classic - local users authenticate as themselves". In spite of this, I still tried enabling the Guest account and adding permissions for it on the share to no effect. What am I missing here? How do I allow anonymous logons to a shared folder as a step toward getting my ACT Data Collectors to deposit their data correctly? Am I even on the right track, or is the issue elsewhere?

  Read the article

• Why isn't this rewrite rule (nginx) applied? (trying to setup Wordpress multisite)

  - by Brian Park

  Hi, I'm trying to setup Wordpress multisite (subfolder structure) with nginx, but having a problem with this rewrite rule. Below is the Apache's .htaccess, which I have to translate into nginx configuration. RewriteEngine On RewriteBase /blogs/ RewriteRule ^index\.php$ - [L] # uploaded files RewriteRule ^([_0-9a-zA-Z-]+/)?files/(.+) wp-includes/ms-files.php?file=$2 [L] # add a trailing slash to /wp-admin RewriteRule ^([_0-9a-zA-Z-]+/)?wp-admin$ $1wp-admin/ [R=301,L] RewriteCond %{REQUEST_FILENAME} -f [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^ - [L] RewriteRule ^([_0-9a-zA-Z-]+/)?(wp-(content|admin|includes).*) $2 [L] RewriteRule ^([_0-9a-zA-Z-]+/)?(.*\.php)$ $2 [L] RewriteRule . index.php [L] Below is what I came up with: server { listen 80; server_name example.com; server_name_in_redirect off; expires 1d; access_log /srv/www/example.com/logs/access.log; error_log /srv/www/example.com/logs/error.log; root /srv/www/example.com/public; index index.html; try_files $uri $uri/ /index.html; # rewriting uploaded files rewrite ^/blogs/(.+/)?files/(.+) /blogs/wp-includes/ms-files.php?file=$2 last; # add a trailing slash to /wp-admin rewrite ^/blogs/(.+/)?wp-admin$ /blogs/$1wp-admin/ permanent; if (!-e $request_filename) { rewrite ^/blogs/(.+/)?(wp-(content|admin|includes).*) /blogs/$2 last; rewrite ^/blogs/(.+/)?(.*\.php)$ /blogs/$2 last; } location /blogs/ { index index.php; #try_files $uri $uri/ /blogs/index.php?q=$uri&$args; } location ~ \.php$ { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /srv/www/example.com/public$fastcgi_script_name; } # static assets location ~* ^.+\.(manifest)$ { access_log /srv/www/example.com/logs/static.log; } location ~* ^.+\.(ico|ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|css|rss|atom|js|jpg|jpeg|gif|png|ico|zip|tgz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|bmp|rtf)$ { # only set expires max IFF the file is a static file and exists if (-f $request_filename) { expires max; access_log /srv/www/example.com/logs/static.log; } } } In the above code, I believe rewrite ^/blogs/(.+/)?(.*\.php)$ /blogs/$2 last; has no effect because when I look at the access_log file, I see the following line: 2010/09/15 01:14:55 [error] 10166#0: *8 "/srv/www/example.com/public/blogs/test/index.php" is not found (2: No such file or directory), request: "GET /blogs/test/ HTTP/1.1" (Here, 'test' is the second blog created using multisite feature) What I'm expecting is that /blogs/test/index.php gets rewritten to /blogs/index.php, but it doesn't seem to do that... Am I overlooking something obvious? Thanks!

  Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >