float encoding - Page 192

Convert a DVD Movie Directly to AVI with FairUse Wizard 2.9

- by DigitalGeekery

Are you looking for a way to backup your DVD movie collection to AVI? Today we’ll show you how to rip a DVD movie directly to AVI with FairUse Wizard. About FairUse Wizard FairUse Wizard 2.9 uses the DivX, Xvid, or h.264 codec to convert DVD to an AVI file. It comes in both a free version and commercial version. The free, or “Light” version, can create files up 700MB while the commercial version can output a 1400MB file. This will allow you to back up your movies to CD, or even multiple movies on a single DVD. FairUse Wizard states that it does not work on copy protected discs, but we’ve seen it work on all but some of the most recent copy protection. For this tutorial we’re using the free Light Edition to convert a DVD to AVI. They also offer a commercial version that you can get for $29.99 and it offers even more encoding possibilities for converting video to you portable digital devices. Installation and Configuration Download and install FairUse Wizard. (Download link below). Once the install is complete, open FairUse Wizard by going to Start > All Programs > FairUse Wizard 2 > FairUse Wizard 2. FairUse Wizard will open on the new project screen. Select “Create a new project” and type a project name into the text box. This will be used as the file output name. Ex: A project name of Simpsons Movie will give you an output file of Simpsons Movie.avi. Next, browse for a destination folder for the output file and temp files. Note that you will need a minimum of 6 GB of free disk space for the conversion process. Note: Much of that 6 GB will be used for temporary files that we will delete after the conversion process. Click on the Options button at the bottom. Under Preferences, choose your preferred video codec and file output size. XviD and x264 are installed by default. If you prefer to use DivX, you will have to install it separately. Also note the “Two pass” option. Checking the “Two pass” box will encode your video twice for higher quality, but will take more time. Un-checking the box will speed up the conversion process. Under Audio track, note that English subtitles are enabled by default, so to remove the subtitles, you will need to change the dropdown list so it shows only a dash (-). You can also select “Use TV Mode” if your primary playback will be on a 4:3 TV screen. Click “Next.” Full Auto Mode vs. Manual Mode You should now be back to the initial screen. Next, we’ll need to determine whether or not we can use “Full Auto Mode” to convert the movie. The difference is that “Full Auto Mode” will automatically perform a few steps that you will otherwise have to do manually. If you choose the “Full Auto Mode” option, FairUse Wizard will look for the video on the DVD with the longest duration and assume it is the chain that it should convert to AVI. It’s possible, however, your disc may contain a few chains of similar size, such as a theatrical cut and director’s cut, and the longest chain may not be the one you wish to convert. Make sure that “Full auto mode” is not checked yet, and click “Next.” FairUse Wizard will parse the IFO files and display all video chains longer than 60 seconds. In most cases, you will only find that the largest chain is the one closely matching the duration of the movie. In these instances, you can use “Full Auto Mode.” If you find more than one chain that are close in duration to the length of the movie, consult the literature on the DVD case, or search online, to find the actual running time of the movie. If the proper file chain is not the longest chain, you won’t be able to use “Full Auto Mode.” Full Auto Mode To use “Full Auto Mode,” simply click the “Back” button to return to the initial screen Now, place a check in the “Full auto mode” check box. Click “Next.” You will then be prompted to chose your DVD drive, then click “OK.” FairUse Wizard will parse the IFO files… … and then prompt you to Select your drive that contains the DVD one more time before beginning the conversion process. Click “OK.” Manual Mode If you cannot (or don’t wish to) use Full Auto Mode, choose the appropriate video chain and click “Next.” FairUse Wizard will first go through the process of indexing the video. Note: If you get a runtime error during this portion of the process, it likely means that FairUse Wizard cannot handle the copy protection, and thus cannot convert the DVD. FairUse Wizard will automatically detect a cropping region. If necessary, you can edit the cropping region by adjusting the cropping region settings to the left. Click “Next.” Next, click “Auto Detect” to choose the proper field combination. Click “OK” on the pop up window that displays your Field Mode. Then click “Next.” This next screen is mainly comprised of settings from the Options screen. You can make changes at this point such as codec or output size. Click “Next” when ready. Video Conversion Now the video conversion process will begin. This may take a few hours depending on your system’s hardware. Note: There is a check box to “Shutdown computer when done” if you choose to run the conversion overnight or before leaving for work. The first phase will be video encoding… Then the audio… If you chose the “Two Pass” option, your video video will be encoded again on 2nd pass. Then you’re finished. Unfortunately, FairUse Wizard doesn’t clean up after itself very well. After the process is complete, you’ll want to browse to your output directory and delete all the temporary files as they take up a considerable amount of hard drive space. Now you’re ready to enjoy your movie. Conclusion FairUse Wizard is a nice way to backup your DVD movies to good quality .avi files. You can store them on your hard drive, watch them on a media PC, or burn them to disc. Many DVD players even allow for playback of DivX or XviD encoded video from a CD or DVD. For those of you with children, you can burn that AVI file to CD for your kids, and keep your original DVDs stored safely out of harms way. Download Download FairUse Wizard 2.9 LE Similar Articles Productive Geek Tips Kantaris is a Unique Media Player Based on VLCHow to Make/Edit a movie with Windows Movie Maker in Windows VistaAutomatically Mount and View ISO files in Windows 7 Media CenterTune Your ClearType Font Settings in Windows VistaAdd Images and Metadata to Windows 7 Media Center Movie Library TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

Read the article

Conversion of BizTalk Projects to Use the New WCF-SAP Adaptor

- by Geordie

We are in the process of upgrading our BizTalk Environment from BizTalk 2006 R2 to BizTalk 2010. The SAP adaptor in BizTalk 2010 is an all new and more powerful WCF-SAP adaptor. When my colleagues tested out the new adaptor they discovered that the format of the data extracted from SAP was not identical to the old adaptor. This is not a big deal if the structure of the messages from SAP is simple. In this case we were receiving the delivery and invoice iDocs. Both these structures are complex especially the delivery document. Over the past few years I have tweaked the delivery mapping to remove bugs from original mapping. The idea of redoing these maps did not appeal and due to the current work load was not even an option. I opted for a rather crude alternative of pulling in the iDoc in the new typed format and then adding a static map at the start of the orchestration to convert the data to the old schema. Note WCF-SAP data formats (on the binding tab of the configuration dialog box is the ‘RecieiveIdocFormat’ field): Typed: Returns a XML document with the hierarchy represented in XML and all fields being represented by XML tags. RFC: Returns an XML document with the hierarchy represented in XML but the iDoc lines in flat file format. String: This returns the iDoc in a format that is closest to the original flat file format but is still wrapped with some top level XML tags. The files also contained some strange characters at the end of each line. I started with the invoice document and it was quite straight forward to add the mapping but this is where my problems started. The orchestrations for these documents are dynamic and so require the identity of the partner to be able to correctly configure the orchestration. The partner identity is in the EDI_DC40 segment of the iDoc. In the old project the RECPRN node of the segment was promoted. The code to set a variable to the partner ID was now failing. After lot of head scratching I discovered the problem was due to the addition of Namespaces to the fields in the EDI_DC40 segment. To overcome this I needed to use an xPath query with a Namespace Manager. This had to be done in custom code. I now tried to repeat the process with the delivery document. Unfortunately when we tried to get sample typed data from SAP an exception was thrown. The adapter "WCF-SAP" raised an error message. Details "Microsoft.ServiceModel.Channels.Common.XmlReaderGenerationException: The segment or group definition E2EDKA1001 was not found in the IDoc metadata. The UniqueId of the IDoc type is: IDOCTYP/3/DESADV01/ZASNEXT1/640. For Receive operations, the SAP adapter does not support unreleased segments. Our guess is that when the WCF-SAP adaptor tries to down load the data it retrieves a data schema from SAP. For some reason the schema does not match the data. This may be due to the version of SAP we are running or due to a customization. Either way resolving this problem did not look easy. When doing some research on this problem I found an article showing me how to get the data from SAP using the WCF-SAP adaptor without any XML tags. http://blogs.msdn.com/b/adapters/archive/2007/10/05/receiving-idocs-getting-the-raw-idoc-data.aspx Reproduction of Mustansir blog: Since the WCF based SAP Adapter is ... well, WCF based, all data flowing in and out of the adapter is encapsulated within a SOAP message. Which means there are those pesky xml tags all over the place. If you want to receive an Idoc from SAP, you can receive it in "Typed" format (in which case each column in each segment of the idoc appears within its own xml tag), or you can receive it in "String" format (in which case there are just 2 xml tags at the top, the raw xml data in string/flat file format, and the 2 closing xml tags). In "String" format, an incoming idoc (for ORDERS05, containing 5 data records) would look like: <ReceiveIdoc ><idocData>EDI_DC40 8000000000001064985620 E2EDK01005 800000000000106498500000100000001 E2EDK14 8000000000001064985000002000000020111000 E2EDK14 8000000000001064985000003000000020081000 E2EDK14 80000000000010649850000040000000200710 E2EDK14 80000000000010649850000050000000200600</idocData></ReceiveIdoc> (I have trimmed part of the control record so that it fits cleanly here on one line). Now, you're only interested in the IDOC data, and don't care much for the XML tags. It isn't that difficult to write your own pipeline component, or even some logic in the orchestration to remove the tags, right? Well, you don't need to write any extra code at all - the WCF Adapter can help you here! During the configuration of your one-way Receive Location using WCF-Custom, navigate to the Messages tab. Under the section "Inbound BizTalk Messge Body", select the "Path" radio button, and: (a) Enter the body path expression as: /*[local-name()='ReceiveIdoc']/*[local-name()='idocData'] (b) Choose "String" for the Node Encoding. What we've done is, used an XPATH to pull out the value of the "idocData" node from the XML. Your Receive Location will now emit text containing only the idoc data. You can at this point, for example, put the Flat File Pipeline component to convert the flat text into a different xml format based on some other schema you already have, and receive your version of the xml formatted message in your orchestration. This was potentially a much easier solution than adding the static maps to the orchestrations and overcame the issue with ‘Typed’ delivery documents. Not quite so fast… Note: When I followed Mustansir’s blog the characters at the end of each line disappeared. After configuring the adaptor and passing the iDoc data into the original flat file receive pipelines I was receiving exceptions. There was a failure executing the receive pipeline: "PAPINETPipelines.DeliveryFlatFileReceive, CustomerIntegration2.PAPINET.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=4ca3635fbf092bbb" Source: "Pipeline " Receive Port: "recSAP_Delivery" URI: "D:\CustomerIntegration2\SAP\Delivery\*.xml" Reason: An error occurred when parsing the incoming document: "Unexpected data found while looking for: 'Z2EDPZ7' The current definition being parsed is E2EDP07GRP. The stream offset where the error occured is 8859. The line number where the error occured is 23. The column where the error occured is 0.". Although the new flat file looked the same as the old one there was a differences. In the original file all lines in the document were exactly 1064 character long. In the new file all lines were truncated to the last alphanumeric character. The final piece of the puzzle was to add a custom pipeline component to pad all the lines to 1064 characters. This component was added to the decode node of the custom delivery and invoice flat file disassembler pipelines. Execute method of the custom pipeline component: public IBaseMessage Execute(IPipelineContext pc, IBaseMessage inmsg) { //Convert Stream to a string Stream s = null; IBaseMessagePart bodyPart = inmsg.BodyPart; // NOTE inmsg.BodyPart.Data is implemented only as a setter in the http adapter API and a //getter and setter for the file adapter. Use GetOriginalDataStream to get data instead. if (bodyPart != null) s = bodyPart.GetOriginalDataStream(); string newMsg = string.Empty; string strLine; try { StreamReader sr = new StreamReader(s); strLine = sr.ReadLine(); while (strLine != null) { //Execute padding code if (strLine != null) strLine = strLine.PadRight(1064, ' ') + "\r\n"; newMsg += strLine; strLine = sr.ReadLine(); } sr.Close(); } catch (IOException ex) { throw new Exception("Error occured trying to pad the message to 1064 charactors"); } //Convert back to stream and set to Data property inmsg.BodyPart.Data = new MemoryStream(Encoding.UTF8.GetBytes(newMsg)); ; //reset the position of the stream to zero inmsg.BodyPart.Data.Position = 0; return inmsg; }

Read the article

Squid + Dans Guardian (simple configuration)

- by The Digital Ninja

I just built a new proxy server and compiled the latest versions of squid and dansguardian. We use basic authentication to select what users are allowed outside of our network. It seems squid is working just fine and accepts my username and password and lets me out. But if i connect to dans guardian, it prompts for username and password and then displays a message saying my username is not allowed to access the internet. Its pulling my username for the error message so i know it knows who i am. The part i get confused on is i thought that part was handled all by squid, and squid is working flawlessly. Can someone please double check my config files and tell me if i'm missing something or there is some new option i must set to get this to work. dansguardian.conf # Web Access Denied Reporting (does not affect logging) # # -1 = log, but do not block - Stealth mode # 0 = just say 'Access Denied' # 1 = report why but not what denied phrase # 2 = report fully # 3 = use HTML template file (accessdeniedaddress ignored) - recommended # reportinglevel = 3 # Language dir where languages are stored for internationalisation. # The HTML template within this dir is only used when reportinglevel # is set to 3. When used, DansGuardian will display the HTML file instead of # using the perl cgi script. This option is faster, cleaner # and easier to customise the access denied page. # The language file is used no matter what setting however. # languagedir = '/etc/dansguardian/languages' # language to use from languagedir. language = 'ukenglish' # Logging Settings # # 0 = none 1 = just denied 2 = all text based 3 = all requests loglevel = 3 # Log Exception Hits # Log if an exception (user, ip, URL, phrase) is matched and so # the page gets let through. Can be useful for diagnosing # why a site gets through the filter. on | off logexceptionhits = on # Log File Format # 1 = DansGuardian format 2 = CSV-style format # 3 = Squid Log File Format 4 = Tab delimited logfileformat = 1 # Log file location # # Defines the log directory and filename. #loglocation = '/var/log/dansguardian/access.log' # Network Settings # # the IP that DansGuardian listens on. If left blank DansGuardian will # listen on all IPs. That would include all NICs, loopback, modem, etc. # Normally you would have your firewall protecting this, but if you want # you can limit it to only 1 IP. Yes only one. filterip = # the port that DansGuardian listens to. filterport = 8080 # the ip of the proxy (default is the loopback - i.e. this server) proxyip = 127.0.0.1 # the port DansGuardian connects to proxy on proxyport = 3128 # accessdeniedaddress is the address of your web server to which the cgi # dansguardian reporting script was copied # Do NOT change from the default if you are not using the cgi. # accessdeniedaddress = 'http://YOURSERVER.YOURDOMAIN/cgi-bin/dansguardian.pl' # Non standard delimiter (only used with accessdeniedaddress) # Default is enabled but to go back to the original standard mode dissable it. nonstandarddelimiter = on # Banned image replacement # Images that are banned due to domain/url/etc reasons including those # in the adverts blacklists can be replaced by an image. This will, # for example, hide images from advert sites and remove broken image # icons from banned domains. # 0 = off # 1 = on (default) usecustombannedimage = 1 custombannedimagefile = '/etc/dansguardian/transparent1x1.gif' # Filter groups options # filtergroups sets the number of filter groups. A filter group is a set of content # filtering options you can apply to a group of users. The value must be 1 or more. # DansGuardian will automatically look for dansguardianfN.conf where N is the filter # group. To assign users to groups use the filtergroupslist option. All users default # to filter group 1. You must have some sort of authentication to be able to map users # to a group. The more filter groups the more copies of the lists will be in RAM so # use as few as possible. filtergroups = 1 filtergroupslist = '/etc/dansguardian/filtergroupslist' # Authentication files location bannediplist = '/etc/dansguardian/bannediplist' exceptioniplist = '/etc/dansguardian/exceptioniplist' banneduserlist = '/etc/dansguardian/banneduserlist' exceptionuserlist = '/etc/dansguardian/exceptionuserlist' # Show weighted phrases found # If enabled then the phrases found that made up the total which excedes # the naughtyness limit will be logged and, if the reporting level is # high enough, reported. on | off showweightedfound = on # Weighted phrase mode # There are 3 possible modes of operation: # 0 = off = do not use the weighted phrase feature. # 1 = on, normal = normal weighted phrase operation. # 2 = on, singular = each weighted phrase found only counts once on a page. # weightedphrasemode = 2 # Positive result caching for text URLs # Caches good pages so they don't need to be scanned again # 0 = off (recommended for ISPs with users with disimilar browsing) # 1000 = recommended for most users # 5000 = suggested max upper limit urlcachenumber = # # Age before they are stale and should be ignored in seconds # 0 = never # 900 = recommended = 15 mins urlcacheage = # Smart and Raw phrase content filtering options # Smart is where the multiple spaces and HTML are removed before phrase filtering # Raw is where the raw HTML including meta tags are phrase filtered # CPU usage can be effectively halved by using setting 0 or 1 # 0 = raw only # 1 = smart only # 2 = both (default) phrasefiltermode = 2 # Lower casing options # When a document is scanned the uppercase letters are converted to lower case # in order to compare them with the phrases. However this can break Big5 and # other 16-bit texts. If needed preserve the case. As of version 2.7.0 accented # characters are supported. # 0 = force lower case (default) # 1 = do not change case preservecase = 0 # Hex decoding options # When a document is scanned it can optionally convert %XX to chars. # If you find documents are getting past the phrase filtering due to encoding # then enable. However this can break Big5 and other 16-bit texts. # 0 = disabled (default) # 1 = enabled hexdecodecontent = 0 # Force Quick Search rather than DFA search algorithm # The current DFA implementation is not totally 16-bit character compatible # but is used by default as it handles large phrase lists much faster. # If you wish to use a large number of 16-bit character phrases then # enable this option. # 0 = off (default) # 1 = on (Big5 compatible) forcequicksearch = 0 # Reverse lookups for banned site and URLs. # If set to on, DansGuardian will look up the forward DNS for an IP URL # address and search for both in the banned site and URL lists. This would # prevent a user from simply entering the IP for a banned address. # It will reduce searching speed somewhat so unless you have a local caching # DNS server, leave it off and use the Blanket IP Block option in the # bannedsitelist file instead. reverseaddresslookups = off # Reverse lookups for banned and exception IP lists. # If set to on, DansGuardian will look up the forward DNS for the IP # of the connecting computer. This means you can put in hostnames in # the exceptioniplist and bannediplist. # It will reduce searching speed somewhat so unless you have a local DNS server, # leave it off. reverseclientiplookups = off # Build bannedsitelist and bannedurllist cache files. # This will compare the date stamp of the list file with the date stamp of # the cache file and will recreate as needed. # If a bsl or bul .processed file exists, then that will be used instead. # It will increase process start speed by 300%. On slow computers this will # be significant. Fast computers do not need this option. on | off createlistcachefiles = on # POST protection (web upload and forms) # does not block forms without any file upload, i.e. this is just for # blocking or limiting uploads # measured in kibibytes after MIME encoding and header bumph # use 0 for a complete block # use higher (e.g. 512 = 512Kbytes) for limiting # use -1 for no blocking #maxuploadsize = 512 #maxuploadsize = 0 maxuploadsize = -1 # Max content filter page size # Sometimes web servers label binary files as text which can be very # large which causes a huge drain on memory and cpu resources. # To counter this, you can limit the size of the document to be # filtered and get it to just pass it straight through. # This setting also applies to content regular expression modification. # The size is in Kibibytes - eg 2048 = 2Mb # use 0 for no limit maxcontentfiltersize = # Username identification methods (used in logging) # You can have as many methods as you want and not just one. The first one # will be used then if no username is found, the next will be used. # * proxyauth is for when basic proxy authentication is used (no good for # transparent proxying). # * ntlm is for when the proxy supports the MS NTLM authentication # protocol. (Only works with IE5.5 sp1 and later). **NOT IMPLEMENTED** # * ident is for when the others don't work. It will contact the computer # that the connection came from and try to connect to an identd server # and query it for the user owner of the connection. usernameidmethodproxyauth = on usernameidmethodntlm = off # **NOT IMPLEMENTED** usernameidmethodident = off # Preemptive banning - this means that if you have proxy auth enabled and a user accesses # a site banned by URL for example they will be denied straight away without a request # for their user and pass. This has the effect of requiring the user to visit a clean # site first before it knows who they are and thus maybe an admin user. # This is how DansGuardian has always worked but in some situations it is less than # ideal. So you can optionally disable it. Default is on. # As a side effect disabling this makes AD image replacement work better as the mime # type is know. preemptivebanning = on # Misc settings # if on it adds an X-Forwarded-For: <clientip> to the HTTP request # header. This may help solve some problem sites that need to know the # source ip. on | off forwardedfor = on # if on it uses the X-Forwarded-For: <clientip> to determine the client # IP. This is for when you have squid between the clients and DansGuardian. # Warning - headers are easily spoofed. on | off usexforwardedfor = off # if on it logs some debug info regarding fork()ing and accept()ing which # can usually be ignored. These are logged by syslog. It is safe to leave # it on or off logconnectionhandlingerrors = on # Fork pool options # sets the maximum number of processes to sporn to handle the incomming # connections. Max value usually 250 depending on OS. # On large sites you might want to try 180. maxchildren = 180 # sets the minimum number of processes to sporn to handle the incomming connections. # On large sites you might want to try 32. minchildren = 32 # sets the minimum number of processes to be kept ready to handle connections. # On large sites you might want to try 8. minsparechildren = 8 # sets the minimum number of processes to sporn when it runs out # On large sites you might want to try 10. preforkchildren = 10 # sets the maximum number of processes to have doing nothing. # When this many are spare it will cull some of them. # On large sites you might want to try 64. maxsparechildren = 64 # sets the maximum age of a child process before it croaks it. # This is the number of connections they handle before exiting. # On large sites you might want to try 10000. maxagechildren = 5000 # Process options # (Change these only if you really know what you are doing). # These options allow you to run multiple instances of DansGuardian on a single machine. # Remember to edit the log file path above also if that is your intention. # IPC filename # # Defines IPC server directory and filename used to communicate with the log process. ipcfilename = '/tmp/.dguardianipc' # URL list IPC filename # # Defines URL list IPC server directory and filename used to communicate with the URL # cache process. urlipcfilename = '/tmp/.dguardianurlipc' # PID filename # # Defines process id directory and filename. #pidfilename = '/var/run/dansguardian.pid' # Disable daemoning # If enabled the process will not fork into the background. # It is not usually advantageous to do this. # on|off ( defaults to off ) nodaemon = off # Disable logging process # on|off ( defaults to off ) nologger = off # Daemon runas user and group # This is the user that DansGuardian runs as. Normally the user/group nobody. # Uncomment to use. Defaults to the user set at compile time. # daemonuser = 'nobody' # daemongroup = 'nobody' # Soft restart # When on this disables the forced killing off all processes in the process group. # This is not to be confused with the -g run time option - they are not related. # on|off ( defaults to off ) softrestart = off maxcontentramcachescansize = 2000 maxcontentfilecachescansize = 20000 downloadmanager = '/etc/dansguardian/downloadmanagers/default.conf' authplugin = '/etc/dansguardian/authplugins/proxy-basic.conf' Squid.conf http_port 3128 hierarchy_stoplist cgi-bin ? acl QUERY urlpath_regex cgi-bin \? cache deny QUERY acl apache rep_header Server ^Apache #broken_vary_encoding allow apache access_log /squid/var/logs/access.log squid hosts_file /etc/hosts auth_param basic program /squid/libexec/ncsa_auth /squid/etc/userbasic.auth auth_param basic children 5 auth_param basic realm proxy auth_param basic credentialsttl 2 hours auth_param basic casesensitive off refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl NoAuthNec src <HIDDEN FOR SECURITY> acl BrkRm src <HIDDEN FOR SECURITY> acl Dials src <HIDDEN FOR SECURITY> acl Comps src <HIDDEN FOR SECURITY> acl whsws dstdom_regex -i .opensuse.org .novell.com .suse.com mirror.mcs.an1.gov mirrors.kernerl.org www.suse.de suse.mirrors.tds.net mirrros.usc.edu ftp.ale.org suse.cs.utah.edu mirrors.usc.edu mirror.usc.an1.gov linux.nssl.noaa.gov noaa.gov .kernel.org ftp.ale.org ftp.gwdg.de .medibuntu.org mirrors.xmission.com .canonical.com .ubuntu. acl opensites dstdom_regex -i .mbsbooks.com .bowker.com .usps.com .usps.gov .ups.com .fedex.com go.microsoft.com .microsoft.com .apple.com toolbar.msn.com .contacts.msn.com update.services.openoffice.org fms2.pointroll.speedera.net services.wmdrm.windowsmedia.com windowsupdate.com .adobe.com .symantec.com .vitalbook.com vxn1.datawire.net vxn.datawire.net download.lavasoft.de .download.lavasoft.com .lavasoft.com updates.ls-servers.com .canadapost. .myyellow.com minirick symantecliveupdate.com wm.overdrive.com www.overdrive.com productactivation.one.microsoft.com www.update.microsoft.com testdrive.whoson.com www.columbia.k12.mo.us banners.wunderground.com .kofax.com .gotomeeting.com tools.google.com .dl.google.com .cache.googlevideo.com .gpdl.google.com .clients.google.com cache.pack.google.com kh.google.com maps.google.com auth.keyhole.com .contacts.msn.com .hrblock.com .taxcut.com .merchantadvantage.com .jtv.com .malwarebytes.org www.google-analytics.com dcs.support.xerox.com .dhl.com .webtrendslive.com javadl-esd.sun.com javadl-alt.sun.com .excelsior.edu .dhlglobalmail.com .nessus.org .foxitsoftware.com foxit.vo.llnwd.net installshield.com .mindjet.com .mediascouter.com media.us.elsevierhealth.com .xplana.com .govtrack.us sa.tulsacc.edu .omniture.com fpdownload.macromedia.com webservices.amazon.com acl password proxy_auth REQUIRED acl all src all acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 563 631 2001 2005 8731 9001 9080 10000 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port # https, snews 443 563 acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port # unregistered ports 1936-65535 acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 10000 acl Safe_ports port 631 acl Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method CONNECT acl UTubeUsers proxy_auth "/squid/etc/utubeusers.list" acl RestrictUTube dstdom_regex -i youtube.com acl RestrictFacebook dstdom_regex -i facebook.com acl FacebookUsers proxy_auth "/squid/etc/facebookusers.list" acl BuemerKEC src 10.10.128.0/24 acl MBSsortnet src 10.10.128.0/26 acl MSNExplorer browser -i MSN acl Printers src <HIDDEN FOR SECURITY> acl SpecialFolks src <HIDDEN FOR SECURITY> # streaming download acl fails rep_mime_type ^.*mms.* acl fails rep_mime_type ^.*ms-hdr.* acl fails rep_mime_type ^.*x-fcs.* acl fails rep_mime_type ^.*x-ms-asf.* acl fails2 urlpath_regex dvrplayer mediastream mms:// acl fails2 urlpath_regex \.asf$ \.afx$ \.flv$ \.swf$ acl deny_rep_mime_flashvideo rep_mime_type -i video/flv acl deny_rep_mime_shockwave rep_mime_type -i ^application/x-shockwave-flash$ acl x-type req_mime_type -i ^application/octet-stream$ acl x-type req_mime_type -i application/octet-stream acl x-type req_mime_type -i ^application/x-mplayer2$ acl x-type req_mime_type -i application/x-mplayer2 acl x-type req_mime_type -i ^application/x-oleobject$ acl x-type req_mime_type -i application/x-oleobject acl x-type req_mime_type -i application/x-pncmd acl x-type req_mime_type -i ^video/x-ms-asf$ acl x-type2 rep_mime_type -i ^application/octet-stream$ acl x-type2 rep_mime_type -i application/octet-stream acl x-type2 rep_mime_type -i ^application/x-mplayer2$ acl x-type2 rep_mime_type -i application/x-mplayer2 acl x-type2 rep_mime_type -i ^application/x-oleobject$ acl x-type2 rep_mime_type -i application/x-oleobject acl x-type2 rep_mime_type -i application/x-pncmd acl x-type2 rep_mime_type -i ^video/x-ms-asf$ acl RestrictHulu dstdom_regex -i hulu.com acl broken dstdomain cms.montgomerycollege.edu events.columbiamochamber.com members.columbiamochamber.com public.genexusserver.com acl RestrictVimeo dstdom_regex -i vimeo.com acl http_port port 80 #http_reply_access deny deny_rep_mime_flashvideo #http_reply_access deny deny_rep_mime_shockwave #streaming files #http_access deny fails #http_reply_access deny fails #http_access deny fails2 #http_reply_access deny fails2 #http_access deny x-type #http_reply_access deny x-type #http_access deny x-type2 #http_reply_access deny x-type2 follow_x_forwarded_for allow localhost acl_uses_indirect_client on log_uses_indirect_client on http_access allow manager localhost http_access deny manager http_access allow purge localhost http_access deny purge http_access allow SpecialFolks http_access deny CONNECT !SSL_ports http_access allow whsws http_access allow opensites http_access deny BuemerKEC !MBSsortnet http_access deny BrkRm RestrictUTube RestrictFacebook RestrictVimeo http_access allow RestrictUTube UTubeUsers http_access deny RestrictUTube http_access allow RestrictFacebook FacebookUsers http_access deny RestrictFacebook http_access deny RestrictHulu http_access allow NoAuthNec http_access allow BrkRm http_access allow FacebookUsers RestrictVimeo http_access deny RestrictVimeo http_access allow Comps http_access allow Dials http_access allow Printers http_access allow password http_access deny !Safe_ports http_access deny SSL_ports !CONNECT http_access allow http_port http_access deny all http_reply_access allow all icp_access allow all access_log /squid/var/logs/access.log squid visible_hostname proxy.site.com forwarded_for off coredump_dir /squid/cache/ #header_access Accept-Encoding deny broken #acl snmppublic snmp_community mysecretcommunity #snmp_port 3401 #snmp_access allow snmppublic all cache_mem 3 GB #acl snmppublic snmp_community mbssquid #snmp_port 3401 #snmp_access allow snmppublic all

Read the article

XNA 2D Collision with specific tiles

- by zenzero

I am new to game programming and to these sites for help. I am making a 2D game but I can't seem to get the collision between my character and certain tiles. I have a map filled with grass tiles and water tiles and I want to keep my character from walking on the water tiles. I have a Tiles class that I use so that the tiles are objects and also has the collision method in it, a TileEngine class used create the map and it also holds a list of Tiles, and the class James which is for my character. I also have a Camera class that centers the camera on my character if that has anything to do with the problem. The character's movement is intended to be restricted to 4 directions(up, down, left, right). As an extra note, the bottom right water tile does have collision, but the collision does not occur for any of the other water tiles. Here is my TileEngine class using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace Test2DGame2 { class TileEngine : Microsoft.Xna.Framework.Game { //makes a list of Tiles objects public List<Tiles> tilesList = new List<Tiles>(); public TileEngine() {} public static int tileWidth = 64; public static int tileHeight = 64; public int[,] map = { {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, {0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, {0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, }; public void drawMap(SpriteBatch spriteBatch) { for (int y = 0; y < map.GetLength(0); y++) { for (int x = 0; x < map.GetLength(1); x++) { //make a Rectangle tilesList[map[y, x]].rectangle = new Rectangle(x * tileWidth, y * tileHeight, tileWidth, tileHeight); //draw the Tiles objects spriteBatch.Draw(tilesList[map[y, x]].texture, tilesList[map[y, x]].rectangle, Color.White); } } } } } Here is my Tiles class using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace Test2DGame2 { class Tiles { public Texture2D texture; public Rectangle rectangle; public Tiles(Texture2D texture) { this.texture = texture; } //check to see if james collides with the tile from the right side public void rightCollision(James james) { if (james.GetBounds().Intersects(rectangle)) { james.position.X = rectangle.Left - james.front.Width; } } } } I have a method for rightCollision because I could only figure out how to get the collisions from specifying directions. and here is the James class for my character using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace Test2DGame2 { class James { public Texture2D front; public Texture2D back; public Texture2D left; public Texture2D right; public Vector2 center; public Vector2 position; public James(Texture2D front) { position = new Vector2(0, 0); this.front = front; center = new Vector2(front.Width / 2, front.Height / 2); } public James(Texture2D front, Vector2 newPosition) { this.front = front; position = newPosition; center = new Vector2(front.Width / 2, front.Height / 2); } public void move(GameTime gameTime) { KeyboardState keyboard = Keyboard.GetState(); float SCALE = 20.0f; float speed = gameTime.ElapsedGameTime.Milliseconds / 100.0f; if (keyboard.IsKeyDown(Keys.Up)) { position.Y -=speed * SCALE; } else if (keyboard.IsKeyDown(Keys.Down)) { position.Y += speed * SCALE; } else if (keyboard.IsKeyDown(Keys.Left)) { position.X -= speed * SCALE; } else if (keyboard.IsKeyDown(Keys.Right)) { position.X += speed * SCALE; } } public void draw(SpriteBatch spriteBatch) { spriteBatch.Draw(front, position, null, Color.White, 0, center, 1.0f, SpriteEffects.None, 0.0f); } //get the boundingbox for James public Rectangle GetBounds() { return new Rectangle( (int)position.X, (int)position.Y, front.Width, front.Height); } } }

Read the article

C# Extension Methods - To Extend or Not To Extend...

- by James Michael Hare

I've been thinking a lot about extension methods lately, and I must admit I both love them and hate them. They are a lot like sugar, they taste so nice and sweet, but they'll rot your teeth if you eat them too much. I can't deny that they aren't useful and very handy. One of the major components of the Shared Component library where I work is a set of useful extension methods. But, I also can't deny that they tend to be overused and abused to willy-nilly extend every living type. So what constitutes a good extension method? Obviously, you can write an extension method for nearly anything whether it is a good idea or not. Many times, in fact, an idea seems like a good extension method but in retrospect really doesn't fit. So what's the litmus test? To me, an extension method should be like in the movies when a person runs into their twin, separated at birth. You just know you're related. Obviously, that's hard to quantify, so let's try to put a few rules-of-thumb around them. A good extension method should: Apply to any possible instance of the type it extends. Simplify logic and improve readability/maintainability. Apply to the most specific type or interface applicable. Be isolated in a namespace so that it does not pollute IntelliSense. So let's look at a few examples in relation to these rules. The first rule, to me, is the most important of all. Once again, it bears repeating, a good extension method should apply to all possible instances of the type it extends. It should feel like the long lost relative that should have been included in the original class but somehow was missing from the family tree. Take this nifty little int extension, I saw this once in a blog and at first I really thought it was pretty cool, but then I started noticing a code smell I couldn't quite put my finger on. So let's look: public static class IntExtensinos { public static int Seconds(int num) { return num * 1000; } public static int Minutes(int num) { return num * 60000; } } This is so you could do things like: ... Thread.Sleep(5.Seconds()); ... proxy.Timeout = 1.Minutes(); ... Awww, you say, that's cute! Well, that's the problem, it's kitschy and it doesn't always apply (and incidentally you could achieve the same thing with TimeStamp.FromSeconds(5)). It's syntactical candy that looks cool, but tends to rot and pollute the code. It would allow things like: total += numberOfTodaysOrders.Seconds(); which makes no sense and should never be allowed. The problem is you're applying an extension method to a logical domain, not a type domain. That is, the extension method Seconds() doesn't really apply to ALL ints, it applies to ints that are representative of time that you want to convert to milliseconds. Do you see what I mean? The two problems, in a nutshell, are that a) Seconds() called off a non-time value makes no sense and b) calling Seconds() off something to pass to something that does not take milliseconds will be off by a factor of 1000 or worse. Thus, in my mind, you should only ever have an extension method that applies to the whole domain of that type. For example, this is one of my personal favorites: public static bool IsBetween<T>(this T value, T low, T high) where T : IComparable<T> { return value.CompareTo(low) >= 0 && value.CompareTo(high) <= 0; } This allows you to check if any IComparable<T> is within an upper and lower bound. Think of how many times you type something like: if (response.Employee.Address.YearsAt >= 2 && response.Employee.Address.YearsAt <= 10) { ... } Now, you can instead type: if(response.Employee.Address.YearsAt.IsBetween(2, 10)) { ... } Note that this applies to all IComparable<T> -- that's ints, chars, strings, DateTime, etc -- and does not depend on any logical domain. In addition, it satisfies the second point and actually makes the code more readable and maintainable. Let's look at the third point. In it we said that an extension method should fit the most specific interface or type possible. Now, I'm not saying if you have something that applies to enumerables, you create an extension for List, Array, Dictionary, etc (though you may have reasons for doing so), but that you should beware of making things TOO general. For example, let's say we had an extension method like this: public static T ConvertTo<T>(this object value) { return (T)Convert.ChangeType(value, typeof(T)); } This lets you do more fluent conversions like: double d = "5.0".ConvertTo<double>(); However, if you dig into Reflector (LOVE that tool) you will see that if the type you are calling on does not implement IConvertible, what you convert to MUST be the exact type or it will throw an InvalidCastException. Now this may or may not be what you want in this situation, and I leave that up to you. Things like this would fail: object value = new Employee(); ... // class cast exception because typeof(IEmployee) != typeof(Employee) IEmployee emp = value.ConvertTo<IEmployee>(); Yes, that's a downfall of working with Convertible in general, but if you wanted your fluent interface to be more type-safe so that ConvertTo were only callable on IConvertibles (and let casting be a manual task), you could easily make it: public static T ConvertTo<T>(this IConvertible value) { return (T)Convert.ChangeType(value, typeof(T)); } This is what I mean by choosing the best type to extend. Consider that if we used the previous (object) version, every time we typed a dot ('.') on an instance we'd pull up ConvertTo() whether it was applicable or not. By filtering our extension method down to only valid types (those that implement IConvertible) we greatly reduce our IntelliSense pollution and apply a good level of compile-time correctness. Now my fourth rule is just my general rule-of-thumb. Obviously, you can make extension methods as in-your-face as you want. I included all mine in my work libraries in its own sub-namespace, something akin to: namespace Shared.Core.Extensions { ... } This is in a library called Shared.Core, so just referencing the Core library doesn't pollute your IntelliSense, you have to actually do a using on Shared.Core.Extensions to bring the methods in. This is very similar to the way Microsoft puts its extension methods in System.Linq. This way, if you want 'em, you use the appropriate namespace. If you don't want 'em, they won't pollute your namespace. To really make this work, however, that namespace should only include extension methods and subordinate types those extensions themselves may use. If you plant other useful classes in those namespaces, once a user includes it, they get all the extensions too. Also, just as a personal preference, extension methods that aren't simply syntactical shortcuts, I like to put in a static utility class and then have extension methods for syntactical candy. For instance, I think it imaginable that any object could be converted to XML: namespace Shared.Core { // A collection of XML Utility classes public static class XmlUtility { ... // Serialize an object into an xml string public static string ToXml(object input) { var xs = new XmlSerializer(input.GetType()); // use new UTF8Encoding here, not Encoding.UTF8. The later includes // the BOM which screws up subsequent reads, the former does not. using (var memoryStream = new MemoryStream()) using (var xmlTextWriter = new XmlTextWriter(memoryStream, new UTF8Encoding())) { xs.Serialize(xmlTextWriter, input); return Encoding.UTF8.GetString(memoryStream.ToArray()); } } ... } } I also wanted to be able to call this from an object like: value.ToXml(); But here's the problem, if i made this an extension method from the start with that one little keyword "this", it would pop into IntelliSense for all objects which could be very polluting. Instead, I put the logic into a utility class so that users have the choice of whether or not they want to use it as just a class and not pollute IntelliSense, then in my extensions namespace, I add the syntactical candy: namespace Shared.Core.Extensions { public static class XmlExtensions { public static string ToXml(this object value) { return XmlUtility.ToXml(value); } } } So now it's the best of both worlds. On one hand, they can use the utility class if they don't want to pollute IntelliSense, and on the other hand they can include the Extensions namespace and use as an extension if they want. The neat thing is it also adheres to the Single Responsibility Principle. The XmlUtility is responsible for converting objects to XML, and the XmlExtensions is responsible for extending object's interface for ToXml().

Read the article

CodePlex Daily Summary for Sunday, June 01, 2014

CodePlex Daily Summary for Sunday, June 01, 2014Popular ReleasesSandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: V1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Fancontroller: Fancontroller: Initial releaseVi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew ProjectsCet MicroWPF: WPF-like library for simple graphic-UI application using Netduino (Plus) 2 and the FTDI FT800 Eve board.Fakemons: Some Fakmons, powered by XML, XSLT, CSS and JavascriptFling OS: Fling OS is a C# operating system project aiming to create a new, managed operating system from the ground up.MudRoom: Experimental tool sets in mud parsing and area definitionOOP-2112110158: My name's NgocDungRoslynResearch: Roslyn ResearchTHD - Control de Usuarios: control de usuarios y permisosWPF Kinect User Controls: WPF Kinect User Control project provide simple Tilt and Skeleton Tracking Parameter Controls.

Read the article

Android - Create a custom multi-line ListView bound to an ArrayList

- by Bill Osuch

The Android HelloListView tutorial shows how to bind a ListView to an array of string objects, but you'll probably outgrow that pretty quickly. This post will show you how to bind the ListView to an ArrayList of custom objects, as well as create a multi-line ListView. Let's say you have some sort of search functionality that returns a list of people, along with addresses and phone numbers. We're going to display that data in three formatted lines for each result, and make it clickable. First, create your new Android project, and create two layout files. Main.xml will probably already be created by default, so paste this in: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView android:layout_height="wrap_content" android:text="Custom ListView Contents" android:gravity="center_vertical|center_horizontal" android:layout_width="fill_parent" /> <ListView android:id="@+id/ListView01" android:layout_height="wrap_content" android:layout_width="fill_parent"/> </LinearLayout> Next, create a layout file called custom_row_view.xml. This layout will be the template for each individual row in the ListView. You can use pretty much any type of layout - Relative, Table, etc., but for this we'll just use Linear: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView android:id="@+id/name" android:textSize="14sp" android:textStyle="bold" android:textColor="#FFFF00" android:layout_width="wrap_content" android:layout_height="wrap_content"/> <TextView android:id="@+id/cityState" android:layout_width="wrap_content" android:layout_height="wrap_content"/> <TextView android:id="@+id/phone" android:layout_width="wrap_content" android:layout_height="wrap_content"/> </LinearLayout> Now, add an object called SearchResults. Paste this code in: public class SearchResults { private String name = ""; private String cityState = ""; private String phone = ""; public void setName(String name) { this.name = name; } public String getName() { return name; } public void setCityState(String cityState) { this.cityState = cityState; } public String getCityState() { return cityState; } public void setPhone(String phone) { this.phone = phone; } public String getPhone() { return phone; } } This is the class that we'll be filling with our data, and loading into an ArrayList. Next, you'll need a custom adapter. This one just extends the BaseAdapter, but you could extend the ArrayAdapter if you prefer. public class MyCustomBaseAdapter extends BaseAdapter { private static ArrayList<SearchResults> searchArrayList; private LayoutInflater mInflater; public MyCustomBaseAdapter(Context context, ArrayList<SearchResults> results) { searchArrayList = results; mInflater = LayoutInflater.from(context); } public int getCount() { return searchArrayList.size(); } public Object getItem(int position) { return searchArrayList.get(position); } public long getItemId(int position) { return position; } public View getView(int position, View convertView, ViewGroup parent) { ViewHolder holder; if (convertView == null) { convertView = mInflater.inflate(R.layout.custom_row_view, null); holder = new ViewHolder(); holder.txtName = (TextView) convertView.findViewById(R.id.name); holder.txtCityState = (TextView) convertView.findViewById(R.id.cityState); holder.txtPhone = (TextView) convertView.findViewById(R.id.phone); convertView.setTag(holder); } else { holder = (ViewHolder) convertView.getTag(); } holder.txtName.setText(searchArrayList.get(position).getName()); holder.txtCityState.setText(searchArrayList.get(position).getCityState()); holder.txtPhone.setText(searchArrayList.get(position).getPhone()); return convertView; } static class ViewHolder { TextView txtName; TextView txtCityState; TextView txtPhone; } } (This is basically the same as the List14.java API demo) Finally, we'll wire it all up in the main class file: public class CustomListView extends Activity { @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); ArrayList<SearchResults> searchResults = GetSearchResults(); final ListView lv1 = (ListView) findViewById(R.id.ListView01); lv1.setAdapter(new MyCustomBaseAdapter(this, searchResults)); lv1.setOnItemClickListener(new OnItemClickListener() { @Override public void onItemClick(AdapterView<?> a, View v, int position, long id) { Object o = lv1.getItemAtPosition(position); SearchResults fullObject = (SearchResults)o; Toast.makeText(ListViewBlogPost.this, "You have chosen: " + " " + fullObject.getName(), Toast.LENGTH_LONG).show(); } }); } private ArrayList<SearchResults> GetSearchResults(){ ArrayList<SearchResults> results = new ArrayList<SearchResults>(); SearchResults sr1 = new SearchResults(); sr1.setName("John Smith"); sr1.setCityState("Dallas, TX"); sr1.setPhone("214-555-1234"); results.add(sr1); sr1 = new SearchResults(); sr1.setName("Jane Doe"); sr1.setCityState("Atlanta, GA"); sr1.setPhone("469-555-2587"); results.add(sr1); sr1 = new SearchResults(); sr1.setName("Steve Young"); sr1.setCityState("Miami, FL"); sr1.setPhone("305-555-7895"); results.add(sr1); sr1 = new SearchResults(); sr1.setName("Fred Jones"); sr1.setCityState("Las Vegas, NV"); sr1.setPhone("612-555-8214"); results.add(sr1); return results; } } Notice that we first get an ArrayList of SearchResults objects (normally this would be from an external data source...), pass it to the custom adapter, then set up a click listener. The listener gets the item that was clicked, converts it back to a SearchResults object, and does whatever it needs to do. Fire it up in the emulator, and you should wind up with something like this:

Read the article

Using JQuery tabs in an HTML 5 page

- by nikolaosk

In this post I will show you how to create a simple tabbed interface using JQuery,HTML 5 and CSS.Make sure you have downloaded the latest version of JQuery (minified version) from http://jquery.com/download.Please find here all my posts regarding JQuery.Also have a look at my posts regarding HTML 5.In order to be absolutely clear this is not (and could not be) a detailed tutorial on HTML 5. There are other great resources for that.Navigate to the excellent interactive tutorials of W3School.Another excellent resource is HTML 5 Doctor.Two very nice sites that show you what features and specifications are implemented by various browsers and their versions are http://caniuse.com/ and http://html5test.com/. At this times Chrome seems to support most of HTML 5 specifications.Another excellent way to find out if the browser supports HTML 5 and CSS 3 features is to use the Javascript lightweight library Modernizr.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here. Let me move on to the actual example.This is the sample HTML 5 page<!DOCTYPE html><html lang="en"> <head> <title>Liverpool Legends</title> <meta http-equiv="Content-Type" content="text/html;charset=utf-8" > <link rel="stylesheet" type="text/css" href="style.css"> <script type="text/javascript" src="jquery-1.8.2.min.js"> </script> <script type="text/javascript" src="tabs.js"></script> </head> <body> <header> <h1>Liverpool Legends</h1> </header> <section id="tabs"> <ul> <li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=9143136#first-tab">Defenders</a></li> <li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=9143136#second-tab">Midfielders</a></li> <li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=9143136#third-tab">Strikers</a></li> </ul> <div id="first-tab"> <h3>Liverpool Defenders</h3> <p> The best defenders that played for Liverpool are Jamie Carragher, Sami Hyypia , Ron Yeats and Alan Hansen.</p> </div> <div id="second-tab"> <h3>Liverpool Midfielders</h3> <p> The best midfielders that played for Liverpool are Kenny Dalglish, John Barnes,Ian Callaghan,Steven Gerrard and Jan Molby. </p> </div> <div id="third-tab"> <h3>Liverpool Strikers</h3> <p>The best strikers that played for Liverpool are Ian Rush,Roger Hunt,Robbie Fowler and Fernando Torres.<br/> </p> </div> </div></section> <footer> <p>All Rights Reserved</p> </footer> </body> </html> This is very simple HTML markup. I have styled this markup using CSS.The contents of the style.css file follow* { margin: 0; padding: 0;}header{font-family:Tahoma;font-size:1.3em;color:#505050;text-align:center;}#tabs { font-size: 0.9em; margin: 20px 0;}#tabs ul { float: left; background: #777; width: 260px; padding-top: 24px;}#tabs li { margin-left: 8px; list-style: none;}* html #tabs li { display: inline;}#tabs li, #tabs li a { float: left;}#tabs ul li.active { border-top:2px red solid; background: #15ADFF;}#tabs ul li.active a { color: #333333;}#tabs div { background: #15ADFF; clear: both; padding: 15px; min-height: 200px;}#tabs div h3 { margin-bottom: 12px;}#tabs div p { line-height: 26px;}#tabs ul li a { text-decoration: none; padding: 8px; color:#0b2f20; font-weight: bold;}footer{background-color:#999;width:100%;text-align:center;font-size:1.1em;color:#002233;}There are some CSS rules that style the various elements in the HTML 5 file. These are straight-forward rules. The JQuery code lives inside the tabs.js file $(document).ready(function(){$('#tabs div').hide();$('#tabs div:first').show();$('#tabs ul li:first').addClass('active'); $('#tabs ul li a').click(function(){$('#tabs ul li').removeClass('active');$(this).parent().addClass('active');var currentTab = $(this).attr('href');$('#tabs div').hide();$(currentTab).show();return false;});}); I am using some of the most commonly used JQuery functions like hide , show, addclass , removeClass I hide and show the tabs when the tab becomes the active tab. When I view my page I get the following result Hope it helps!!!!!

Read the article

How to select the first ocurrence in the auto-completion menu by pressing Enter?

- by janoChen

Every time there's is a pop up menu. I select the first occurrence and press enter but nothing happens (the word is not completed with he selected occurrence). The only way is to press Tab until you reach the term for a second time. Is there a way of selecting the first occurrence pressing Enter (or other Vim hotkey)? My .vimrc: " SHORTCUTS nnoremap <F4> :set filetype=html<CR> nnoremap <F5> :set filetype=php<CR> nnoremap <F3> :TlistToggle<CR> " press space to turn off highlighting and clear any message already displayed. nnoremap <silent> <Space> :nohlsearch<Bar>:echo<CR> " set buffers commands nnoremap <silent> <M-F8> :BufExplorer<CR> nnoremap <silent> <F8> :bn<CR> nnoremap <silent> <S-F8> :bp<CR> " open NERDTree with start directory: D:\wamp\www nnoremap <F9> :NERDTree /home/alex/www<CR> " open MRU nnoremap <F10> :MRU<CR> " open current file (silently) nnoremap <silent> <F11> :let old_reg=@"<CR>:let @"=substitute(expand("%:p"), "/", "\\", "g")<CR>:silent!!cmd /cstart <C-R><C-R>"<CR><CR>:let @"=old_reg<CR> " open current file in localhost (default browser) nnoremap <F12> :! start "http://localhost" file:///"%:p""<CR> " open Vim's default Explorer nnoremap <silent> <F2> :Explore<CR> nnoremap <C-F2> :%s/\.html/.php/g<CR> " REMAPPING " map leader to , let mapleader = "," " remap ` to ' nnoremap ' ` nnoremap ` ' " remap increment numbers nnoremap <C-kPlus> <C-A> " COMPRESSION function Js_css_compress () let cwd = expand('<afile>:p:h') let nam = expand('<afile>:t:r') let ext = expand('<afile>:e') if -1 == match(nam, "[\._]src$") let minfname = nam.".min.".ext else let minfname = substitute(nam, "[\._]src$", "", "g").".".ext endif if ext == 'less' if executable('lessc') cal system( 'lessc '.cwd.'/'.nam.'.'.ext.' &') endif else if filewritable(cwd.'/'.minfname) if ext == 'js' && executable('closure-compiler') cal system( 'closure-compiler --js '.cwd.'/'.nam.'.'.ext.' > '.cwd.'/'.minfname.' &') elseif executable('yuicompressor') cal system( 'yuicompressor '.cwd.'/'.nam.'.'.ext.' > '.cwd.'/'.minfname.' &') endif endif endif endfunction autocmd FileWritePost,BufWritePost *.js :call Js_css_compress() autocmd FileWritePost,BufWritePost *.css :call Js_css_compress() autocmd FileWritePost,BufWritePost *.less :call Js_css_compress() " GUI " taglist right side let Tlist_Use_Right_Window = 1 " hide tool bar set guioptions-=T "remove scroll bars set guioptions+=LlRrb set guioptions-=LlRrb " set the initial size of window set lines=46 columns=180 " set default font set guifont=Monospace " set guifont=Monospace\ 10 " show line number set number " set default theme colorscheme molokai-2 " encoding set encoding=utf-8 setglobal fileencoding=utf-8 bomb set fileencodings=ucs-bom,utf-8,latin1 " SCSS syntax highlight au BufRead,BufNewFile *.scss set filetype=scss " LESS syntax highlight syntax on au BufNewFile,BufRead *.less set filetype=less " Haml syntax highlight "au! BufRead,BufNewFile *.haml "setfiletype haml " Sass syntax highlight "au! BufRead,BufNewFile *.sass "setfiletype sass " set filetype indent filetype indent on " for snipMate to work filetype plugin on " show breaks set showbreak=-----> " coding format set tabstop=4 set shiftwidth=4 set linespace=1 " CONFIG " set location of ctags let Tlist_Ctags_Cmd='D:\ctags58\ctags.exe' " keep the buffer around when left set hidden " enable matchit plugin source $VIMRUNTIME/macros/matchit.vim " folding set foldmethod=marker set foldmarker={,} let g:FoldMethod = 0 map <leader>ff :call ToggleFold()<cr> fun! ToggleFold() if g:FoldMethod == 0 exe 'set foldmethod=indent' let g:FoldMethod = 1 else exe 'set foldmethod=marker' let g:FoldMethod = 0 endif endfun " save and restore folds when a file is closed and re-opened "au BufWrite ?* mkview "au BufRead ?* silent loadview " auto-open NERDTree everytime Vim is invoked au VimEnter * NERDTree /home/alex/www " set omnicomplete autocmd FileType python set omnifunc=pythoncomplete#Complete autocmd FileType javascript set omnifunc=javascriptcomplete#CompleteJS autocmd FileType html set omnifunc=htmlcomplete#CompleteTags autocmd FileType css set omnifunc=csscomplete#CompleteCSS autocmd FileType xml set omnifunc=xmlcomplete#CompleteTags autocmd FileType php set omnifunc=phpcomplete#CompletePHP autocmd FileType c set omnifunc=ccomplete#Complete " Remove trailing white-space once the file is saved au BufWritePre * silent g/\s\+$/s/// " Use CTRL-S for saving, also in Insert mode noremap <C-S> :update!<CR> vnoremap <C-S> <C-C>:update!<CR> inoremap <C-S> <C-O>:update!<CR> " DEFAULT set nocompatible source $VIMRUNTIME/vimrc_example.vim "source $VIMRUNTIME/mswin.vim "behave mswin " disable creation of swap files set noswapfile " no back ups wwhile editing set nowritebackup " disable creation of backups set nobackup " no file change pop up warning autocmd FileChangedShell * echohl WarningMsg | echo "File changed shell." | echohl None set diffexpr=MyDiff() function MyDiff() let opt = '-a --binary ' if &diffopt =~ 'icase' | let opt = opt . '-i ' | endif if &diffopt =~ 'iwhite' | let opt = opt . '-b ' | endif let arg1 = v:fname_in if arg1 =~ ' ' | let arg1 = '"' . arg1 . '"' | endif let arg2 = v:fname_new if arg2 =~ ' ' | let arg2 = '"' . arg2 . '"' | endif let arg3 = v:fname_out if arg3 =~ ' ' | let arg3 = '"' . arg3 . '"' | endif let eq = '' if $VIMRUNTIME =~ ' ' if &sh =~ '\<cmd' let cmd = '""' . $VIMRUNTIME . '\diff"' let eq = '"' else let cmd = substitute($VIMRUNTIME, ' ', '" ', '') . '\diff"' endif else let cmd = $VIMRUNTIME . '\diff' endif silent execute '!' . cmd . ' ' . opt . arg1 . ' ' . arg2 . ' > ' . arg3 . eq endfunction

Read the article

Consuming the Amazon S3 service from a Win8 Metro Application

- by cibrax

As many of the existing Http APIs for Cloud Services, AWS also provides a set of different platform SDKs for hiding many of complexities present in the APIs. While there is a platform SDK for .NET, which is open source and available in C#, that SDK does not work in Win8 Metro Applications for the changes introduced in WinRT. WinRT offers a complete different set of APIs for doing I/O operations such as doing http calls or using cryptography for signing or encrypting data, two aspects that are absolutely necessary for consuming AWS. All the I/O APIs available as part of WinRT are asynchronous, and uses the TPL model for .NET applications (HTML and JavaScript Metro applications use a model based in promises, which is similar concept). In the case of S3, the http Authorization header is used for two purposes, authenticating clients and make sure the messages were not altered while they were in transit. For doing that, it uses a signature or hash of the message content and some of the headers using a symmetric key (That's just one of the available mechanisms). Windows Azure for example also uses the same mechanism in many of its APIs. There are three challenges that any developer working for first time in Metro will have to face to consume S3, the new WinRT APIs, the asynchronous nature of them and the complexity introduced for generating the Authorization header. Having said that, I decided to write this post with some of the gotchas I found myself trying to consume this Amazon service. 1. Generating the signature for the Authorization header All the cryptography APIs in WinRT are available under Windows.Security.Cryptography namespace. Many of operations available in these APIs uses the concept of buffers (IBuffer) for representing a chunk of binary data. As you will see in the example below, these buffers are mainly generated with the use of static methods in a WinRT class CryptographicBuffer available as part of the namespace previously mentioned. private string DeriveAuthToken(string resource, string httpMethod, string timestamp) { var stringToSign = string.Format("{0}\n" + "\n" + "\n" + "\n" + "x-amz-date:{1}\n" + "/{2}/", httpMethod, timestamp, resource); var algorithm = MacAlgorithmProvider.OpenAlgorithm("HMAC_SHA1"); var keyMaterial = CryptographicBuffer.CreateFromByteArray(Encoding.UTF8.GetBytes(this.secret)); var hmacKey = algorithm.CreateKey(keyMaterial); var signature = CryptographicEngine.Sign( hmacKey, CryptographicBuffer.CreateFromByteArray(Encoding.UTF8.GetBytes(stringToSign)) ); return CryptographicBuffer.EncodeToBase64String(signature); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The algorithm that determines the information or content you need to use for generating the signature is very well described as part of the AWS documentation. In this case, this method is generating a signature required for creating a new bucket. A HmacSha1 hash is computed using a secret or symetric key provided by AWS in the management console. 2. Sending an Http Request to the S3 service WinRT also ships with the System.Net.Http.HttpClient that was first introduced some months ago with ASP.NET Web API. This client provides a rich interface on top the traditional WebHttpRequest class, and also solves some of limitations found in this last one. There are a few things that don't work with a raw WebHttpRequest such as setting the Host header, which is something absolutely required for consuming S3. Also, HttpClient is more friendly for doing unit tests, as it receives a HttpMessageHandler as part of the constructor that can fake to emulate a real http call. This is how the code for consuming the service with HttpClient looks like, public async Task<S3Response> CreateBucket(string name, string region = null, params string[] acl) { var timestamp = string.Format("{0:r}", DateTime.UtcNow); var auth = DeriveAuthToken(name, "PUT", timestamp); var request = new HttpRequestMessage(HttpMethod.Put, "http://s3.amazonaws.com/"); request.Headers.Host = string.Format("{0}.s3.amazonaws.com", name); request.Headers.TryAddWithoutValidation("Authorization", "AWS " + this.key + ":" + auth); request.Headers.Add("x-amz-date", timestamp); var client = new HttpClient(); var response = await client.SendAsync(request); return new S3Response { Succeed = response.StatusCode == HttpStatusCode.OK, Message = (response.Content != null) ? await response.Content.ReadAsStringAsync() : null }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You will notice a few additional things in this code. By default, HttpClient validates the values for some well-know headers, and Authorization is one of them. It won't allow you to set a value with ":" on it, which is something that S3 expects. However, that's not a problem at all, as you can skip the validation by using the TryAddWithoutValidation method. Also, the code is heavily relying on the new async and await keywords to transform all the asynchronous calls into synchronous ones. In case you would want to unit test this code and faking the call to the real S3 service, you should have to modify it to inject a custom HttpMessageHandler into the HttpClient. The following implementation illustrates this concept, In case you would want to unit test this code and faking the call to the real S3 service, you should have to modify it to inject a custom HttpMessageHandler into the HttpClient. The following implementation illustrates this concept, public class FakeHttpMessageHandler : HttpMessageHandler { HttpResponseMessage response; public FakeHttpMessageHandler(HttpResponseMessage response) { this.response = response; } protected override Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, System.Threading.CancellationToken cancellationToken) { var tcs = new TaskCompletionSource<HttpResponseMessage>(); tcs.SetResult(response); return tcs.Task; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You can use this handler for injecting any response while you are unit testing the code.

Read the article

Consuming the Amazon S3 service from a Win8 Metro Application

- by cibrax

As many of the existing Http APIs for Cloud Services, AWS also provides a set of different platform SDKs for hiding many of complexities present in the APIs. While there is a platform SDK for .NET, which is open source and available in C#, that SDK does not work in Win8 Metro Applications for the changes introduced in WinRT. WinRT offers a complete different set of APIs for doing I/O operations such as doing http calls or using cryptography for signing or encrypting data, two aspects that are absolutely necessary for consuming AWS. All the I/O APIs available as part of WinRT are asynchronous, and uses the TPL model for .NET applications (HTML and JavaScript Metro applications use a model based in promises, which is similar concept). In the case of S3, the http Authorization header is used for two purposes, authenticating clients and make sure the messages were not altered while they were in transit. For doing that, it uses a signature or hash of the message content and some of the headers using a symmetric key (That's just one of the available mechanisms). Windows Azure for example also uses the same mechanism in many of its APIs. There are three challenges that any developer working for first time in Metro will have to face to consume S3, the new WinRT APIs, the asynchronous nature of them and the complexity introduced for generating the Authorization header. Having said that, I decided to write this post with some of the gotchas I found myself trying to consume this Amazon service. 1. Generating the signature for the Authorization header All the cryptography APIs in WinRT are available under Windows.Security.Cryptography namespace. Many of operations available in these APIs uses the concept of buffers (IBuffer) for representing a chunk of binary data. As you will see in the example below, these buffers are mainly generated with the use of static methods in a WinRT class CryptographicBuffer available as part of the namespace previously mentioned. private string DeriveAuthToken(string resource, string httpMethod, string timestamp) { var stringToSign = string.Format("{0}\n" + "\n" + "\n" + "\n" + "x-amz-date:{1}\n" + "/{2}/", httpMethod, timestamp, resource); var algorithm = MacAlgorithmProvider.OpenAlgorithm("HMAC_SHA1"); var keyMaterial = CryptographicBuffer.CreateFromByteArray(Encoding.UTF8.GetBytes(this.secret)); var hmacKey = algorithm.CreateKey(keyMaterial); var signature = CryptographicEngine.Sign( hmacKey, CryptographicBuffer.CreateFromByteArray(Encoding.UTF8.GetBytes(stringToSign)) ); return CryptographicBuffer.EncodeToBase64String(signature); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The algorithm that determines the information or content you need to use for generating the signature is very well described as part of the AWS documentation. In this case, this method is generating a signature required for creating a new bucket. A HmacSha1 hash is computed using a secret or symetric key provided by AWS in the management console. 2. Sending an Http Request to the S3 service WinRT also ships with the System.Net.Http.HttpClient that was first introduced some months ago with ASP.NET Web API. This client provides a rich interface on top the traditional WebHttpRequest class, and also solves some of limitations found in this last one. There are a few things that don't work with a raw WebHttpRequest such as setting the Host header, which is something absolutely required for consuming S3. Also, HttpClient is more friendly for doing unit tests, as it receives a HttpMessageHandler as part of the constructor that can fake to emulate a real http call. This is how the code for consuming the service with HttpClient looks like, public async Task<S3Response> CreateBucket(string name, string region = null, params string[] acl) { var timestamp = string.Format("{0:r}", DateTime.UtcNow); var auth = DeriveAuthToken(name, "PUT", timestamp); var request = new HttpRequestMessage(HttpMethod.Put, "http://s3.amazonaws.com/"); request.Headers.Host = string.Format("{0}.s3.amazonaws.com", name); request.Headers.TryAddWithoutValidation("Authorization", "AWS " + this.key + ":" + auth); request.Headers.Add("x-amz-date", timestamp); var client = new HttpClient(); var response = await client.SendAsync(request); return new S3Response { Succeed = response.StatusCode == HttpStatusCode.OK, Message = (response.Content != null) ? await response.Content.ReadAsStringAsync() : null }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You will notice a few additional things in this code. By default, HttpClient validates the values for some well-know headers, and Authorization is one of them. It won't allow you to set a value with ":" on it, which is something that S3 expects. However, that's not a problem at all, as you can skip the validation by using the TryAddWithoutValidation method. Also, the code is heavily relying on the new async and await keywords to transform all the asynchronous calls into synchronous ones. In case you would want to unit test this code and faking the call to the real S3 service, you should have to modify it to inject a custom HttpMessageHandler into the HttpClient. The following implementation illustrates this concept, In case you would want to unit test this code and faking the call to the real S3 service, you should have to modify it to inject a custom HttpMessageHandler into the HttpClient. The following implementation illustrates this concept, public class FakeHttpMessageHandler : HttpMessageHandler { HttpResponseMessage response; public FakeHttpMessageHandler(HttpResponseMessage response) { this.response = response; } protected override Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, System.Threading.CancellationToken cancellationToken) { var tcs = new TaskCompletionSource<HttpResponseMessage>(); tcs.SetResult(response); return tcs.Task; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You can use this handler for injecting any response while you are unit testing the code.

Read the article

.htaccess not working (mod_rewrite)

- by Mike Curry

Edit: I am pretty sure my .htaccess file is NOT being executed, and the problem is NOT with my rewrite rules. I have not having any luck getting my .htaccess with mod_rewrite working. Basically all I am trying to do is remove 'www' from "http://www.site.com" and "https://www.site.com". If there is anything I am missing (conf files, etc let me know I willl update this) I jsut can't see whats wrong here... I am using a 1&1 VPS III Virtual private server... anyone ever have this issue? I am using Ubuntu 8.04 Server LTS. Here is my .htaccess file (located @ /var/www/site/trunk/html/) Options +FollowSymLinks RewriteEngine on RewriteCond %{HTTP_HOST} ^www\.(.*) [NC] RewriteRule (.*) //%1/$1 [L,R=301] My mod_rewrite is enabled: The auto regenerated sym link is there in mods-available and /usr/lib/apache2/modules/ contains mod_rewrite.so root@s15348441:/etc/apache2/mods-available# more rewrite.load LoadModule rewrite_module /usr/lib/apache2/modules/mod_rewrite.so root@s15348441:/var/log# apache2ctl -t -D DUMP_MODULES Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgi_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) rewrite_module (shared) setenvif_module (shared) ssl_module (shared) status_module (shared) Syntax OK My apache config files: apache2.conf # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # ServerTokens # This directive configures what you return as the Server HTTP response # Header. The default is 'Full' which sends information about the OS-Type # and compiled in modules. # Set to one of: Full | OS | Minor | Minimal | Major | Prod # where Full conveys the most information, and Prod the least. # ServerTokens Full # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # Putting this all together, we can internationalize error responses. # # We use Alias to redirect any /error/HTTP_<error>.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_<error>.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # /usr/share/apache2/error/include/ files and copying them to /your/include/path/, # even on a per-VirtualHost basis. The default include files will display # your Apache version number and your ServerAdmin email address regardless # of the setting of ServerSignature. # # The internationalized error documents require mod_alias, mod_include # and mod_negotiation. To activate them, uncomment the following 30 lines. # Alias /error/ "/usr/share/apache2/error/" # # <Directory "/usr/share/apache2/error"> # AllowOverride None # Options IncludesNoExec # AddOutputFilter Includes html # AddHandler type-map var # Order allow,deny # Allow from all # LanguagePriority en cs de es fr it nl sv pt-br ro # ForceLanguagePriority Prefer Fallback # </Directory> # # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ My default config file for www on apache NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] #SSLEnable #SSLVerifyClient none #SSLCertificateFile /usr/local/ssl/crt/public.crt #SSLCertificateKeyFile /usr/local/ssl/private/private.key DocumentRoot /var/www/site/trunk/html <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/site/trunk/html> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My ssl config file NameVirtualHost *:443 <VirtualHost *:443> ServerAdmin [email protected] #SSLEnable #SSLVerifyClient none #SSLCertificateFile /usr/local/ssl/crt/public.crt #SSLCertificateKeyFile /usr/local/ssl/private/private.key DocumentRoot /var/www/site/trunk/html <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/site/trunk/html> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn SSLEngine On SSLCertificateFile /usr/local/ssl/crt/public.crt SSLCertificateKeyFile /usr/local/ssl/private/private.key CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My /etc/apache2/httpd.conf is blank The directory /etc/apache2/conf.d has nothing in it but one file (charset) contents of /etc/apache2/conf.dcharset # Read the documentation before enabling AddDefaultCharset. # In general, it is only a good idea if you know that all your files # have this encoding. It will override any encoding given in the files # in meta http-equiv or xml encoding tags. #AddDefaultCharset UTF-8 My apache error.log [Wed Jun 03 00:12:31 2009] [error] [client 216.168.43.234] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Jun 03 05:03:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:03:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:48 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:57 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:17:28 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:26:23 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 05:26:34 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 06:03:41 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 06:03:51 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 06:25:07 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 06:25:17 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 12:09:25 2009] [error] [client 61.139.105.163] File does not exist: /var/www/site/trunk/html/fastenv [Wed Jun 03 15:04:42 2009] [notice] Graceful restart requested, doing restart [Wed Jun 03 15:04:43 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 15:29:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:29:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:30:32 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:45:54 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 15:46:05 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations

Read the article

CodePlex Daily Summary for Monday, June 02, 2014

CodePlex Daily Summary for Monday, June 02, 2014Popular ReleasesPortable Class Library for SQLite: Portable Class Library for SQLite - 3.8.4.4: This pull request from mattleibow addresses an issue with custom function creation (define functions in C# code and invoke them from SQLite as id they where regular SQL functions). Impact: Xamarin iOSTweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.GenerateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweets- Add mis...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Vi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew Projects[ISEN] Rendu de projet Naughty3Dogs - Pong3D: Pong3D est un jeu qui reprend le principe classique du Pong en le portant dans un environnement 3D à l'aide du langage c# et du moteur Unity3DBootstrap for MVC: Bootstrap for MVC.F. A. Q. - Najczesciej zadawane pytania: FAQForuMvc: Technifutur short projecthomework456: no.iStoody: Studies organize solution, available through app for Windows and Windows Phone.liaoliao: ???????????Price Tracker: Allows a user to track prices based on parsed emailsRoslynEval: RoslynRx Hub: Rx Hub provides server side computation which initiate by subscriber requestSharepoint Online AppCache Reset: We are an IT resource company providing Virtual IT services and custom and opensource programs for everyday needs. UnitConversionLib : Smart Unit Conversion Library in C#: Conversion of units, arithmetic operation and parsing quantities with their units on run time. Smart unit converter and conversion lib for physical quantities,

Read the article

SpriteFont Exception, no such character?

- by Michal Bozydar Pawlowski

I have such spriteFont: <?xml version="1.0" encoding="utf-8"?>  <XnaContent xmlns:Graphics="Microsoft.Xna.Framework.Content.Pipeline.Graphics"> <Asset Type="Graphics:FontDescription">  <FontName>Segoe UI</FontName>  <Size>20</Size>  <Spacing>0</Spacing>  <UseKerning>true</UseKerning>  <Style>Regular</Style>    <CharacterRegions> <CharacterRegion> <Start>	</Start> <End>	</End> </CharacterRegion> <CharacterRegion> <Start> </Start> <End>Ұ</End> </CharacterRegion> </CharacterRegions> </Asset> </XnaContent> It has the character regions (32-1200) And I get this exception: A first chance exception of type 'System.ArgumentException' occurred in Microsoft.Xna.Framework.Graphics.ni.dll The character '?' (0x0441) is not available in this SpriteFont. If applicable, adjust the font's start and end CharacterRegions to include this character. Parameter name: character Why? I'm drawing the string like this: spriteBatch.DrawString(font24, zasadyText, zasadyTextPos, kolorCzcionki1, -0.05f, Vector2.Zero, 1.0f, SpriteEffects.None, 0.5f) I even changed the spriteFont to cyrillic: <CharacterRegions> <CharacterRegion> <Start>	</Start> <End>	</End> </CharacterRegion> <CharacterRegion> <Start> </Start> <End>ſ</End> </CharacterRegion> <CharacterRegion> <Start>А</Start> <End>ї</End> </CharacterRegion> </CharacterRegions> </Asset> </XnaContent> and it still doesn't work. I got the (0x441 = char) exception -- EDIT -- Ok, I got the solution. It was a letter mistake in language. I had this: if (jezyk == "ru_RU") { font14 = Content.Load<SpriteFont>("ru_font14"); font24 = Content.Load<SpriteFont>("ru_font24"); font12 = Content.Load<SpriteFont>("ru_czcionkaFloty"); font10 = Content.Load<SpriteFont>("ru_font10"); font28 = Content.Load<SpriteFont>("ru_font28"); font20 = Content.Load<SpriteFont>("ru_font20"); } else { font14 = Content.Load<SpriteFont>("font14"); font24 = Content.Load<SpriteFont>("font24"); font12 = Content.Load<SpriteFont>("czcionkaFloty"); font10 = Content.Load<SpriteFont>("font10"); font28 = Content.Load<SpriteFont>("font28"); font20 = Content.Load<SpriteFont>("font20"); } and there should be not "ru_RU" but "ru-RU" I have no idea. I changed the spriteFont to cyrillic: <CharacterRegions> <CharacterRegion> <Start>	</Start> <End>	</End> </CharacterRegion> <CharacterRegion> <Start> </Start> <End>ſ</End> </CharacterRegion> <CharacterRegion> <Start>А</Start> <End>ї</End> </CharacterRegion> </CharacterRegions> </Asset> </XnaContent> and it still doesn't work. I got the (0x441 = char) exception

Read the article

Why does Google mark one e-mail as spam while does not the other?

- by nKn

I've a Postfix installation which works fine, I don't get any trouble with mails sent through a mail client (in my case, Thunderbird or RoundCube) when the To: address is a GMail account. However, I recently needed to use the PHPMailer tool to send some e-mails to some GMail accounts, so I configured an account to be used via SASL authentication + TLS. I don't mean mass mailing, just 2-3 mails. If I send the e-mail from the Thunderbird or RoundCube clients, the mail is not marked as spam. However, if I use PHPMailer, it always gets catalogued as spam. So I compared both headers and I just can't find the reason why the second is marked as spam while the first one is just ok. The first header sent from a mail client which is not marked as spam: Delivered-To: [email protected] Received: by 10.76.153.102 with SMTP id vf6csp230573oab; Tue, 19 Aug 2014 11:08:19 -0700 (PDT) X-Received: by 10.60.23.39 with SMTP id j7mr45544050oef.20.1408471699715; Tue, 19 Aug 2014 11:08:19 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.mydomain.com (X.ip-92-222-X.eu. [92.222.X.X]) by mx.google.com with ESMTPS id t5si27115082oej.10.2014.08.19.11.08.18 for <[email protected]> (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 19 Aug 2014 11:08:19 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) client-ip=92.222.X.X; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) [email protected]; dkim=pass (test mode) [email protected] Received: by mail.mydomain.com (Postfix, from userid 111) id D8F69120293D; Tue, 19 Aug 2014 19:08:17 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471697; bh=wKMX9gkQ7tCLv8ezrG5t4bICm/SSLQsNfTdZMToksWw=; h=Date:From:To:Subject:From; b=qRNcYVdmk+n3D1uuv0FInTx7/LzH2ojck9DgCmabFPvfke233lkojUOjezCUGx7iV DL8EayZ28mzzzHpB7ETeMzop/5OS3BmvFtGKVD9gzc78cDIFXTDoRFAnkRWDR2IOxI SOn5tiyODTFpkbDgJOndzQ6qL5K0S9ASNGCZrNL4= X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on vpsX.ovh.net X-Spam-Level: X-Spam-Status: No, score=-1.0 required=3.0 tests=ALL_TRUSTED,T_DKIM_INVALID autolearn=ham autolearn_force=no version=3.4.0 Received: from [192.168.1.111] (unknown [77.231.X.X]) (using TLSv1 with cipher ECDHE-RSA-AES128-SHA (128/128 bits)) (No client certificate requested) (Authenticated sender: [email protected]) by mail.mydomain.com (Postfix) with ESMTPSA id 910341202624 for <[email protected]>; Tue, 19 Aug 2014 19:08:17 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471697; bh=wKMX9gkQ7tCLv8ezrG5t4bICm/SSLQsNfTdZMToksWw=; h=Date:From:To:Subject:From; b=qRNcYVdmk+n3D1uuv0FInTx7/LzH2ojck9DgCmabFPvfke233lkojUOjezCUGx7iV DL8EayZ28mzzzHpB7ETeMzop/5OS3BmvFtGKVD9gzc78cDIFXTDoRFAnkRWDR2IOxI SOn5tiyODTFpkbDgJOndzQ6qL5K0S9ASNGCZrNL4= Message-ID: <[email protected]> Date: Tue, 19 Aug 2014 19:08:24 +0100 From: My Name <[email protected]> User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0 MIME-Version: 1.0 To: My other account <[email protected]> Subject: . Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit . The second header sent from PHPMailer which is always marked as spam: Delivered-To: [email protected] Received: by 10.76.153.102 with SMTP id vf6csp230832oab; Tue, 19 Aug 2014 11:12:10 -0700 (PDT) X-Received: by 10.60.121.67 with SMTP id li3mr44086252oeb.17.1408471930520; Tue, 19 Aug 2014 11:12:10 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.mydomain.com (X.ip-92-222-X.eu. [92.222.X.X]) by mx.google.com with ESMTPS id w8si27103806obn.30.2014.08.19.11.12.10 for <[email protected]> (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 19 Aug 2014 11:12:10 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) client-ip=92.222.X.X; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 92.222.X.X as permitted sender) [email protected]; dkim=pass (test mode) [email protected] Received: by mail.mydomain.com (Postfix, from userid 111) id 1999D120293D; Tue, 19 Aug 2014 19:12:09 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471929; bh=N1JuHq1S+8GrjHcEK3xn8P1JS+ygEBv5LKe0BiXuVJo=; h=Date:To:From:Reply-to:Subject:From; b=K7tcPyArzSTY91VEw6mAAFtDurSGwgTLGkfUZdC5mqsg0g/1LzmZkgwdjj4NdJa6M E2kDz3dwYN8FcZmbampJYFXxj4NQVtSnzjiWV40rpfOFqD2rXDGNIyB2QOjBZZ4WK3 7s4lyoJ/BrdQH4en8ctLVsDHed/KpHD4iGFEl67E= X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on vpsX.ovh.net X-Spam-Level: X-Spam-Status: No, score=-1.0 required=3.0 tests=ALL_TRUSTED,T_DKIM_INVALID autolearn=ham autolearn_force=no version=3.4.0 Received: from rpi.mydomain.com (unknown [77.231.X.X]) (using TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: [email protected]) by mail.mydomain.com (Postfix) with ESMTPSA id B42AF1202624 for <[email protected]>; Tue, 19 Aug 2014 19:12:08 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mydomain.com; s=mail; t=1408471928; bh=N1JuHq1S+8GrjHcEK3xn8P1JS+ygEBv5LKe0BiXuVJo=; h=Date:To:From:Reply-to:Subject:From; b=iXPM0tS36swudPTT4FOHHtPi5Ll6LbR60kNqCinZ8utcWoFE31SFTpoMEq5aCM5ux wQMdFiN8c6vkjRGabmvqFTTIbwJsrToHo/4+Lt5HEBoQQE2Y3T+xGmnmGAHCS6stKB yb7SVmtrIAsVtSMKA8VYIbmu2oYqV3afYt7g0OMQ= Date: Tue, 19 Aug 2014 20:12:07 +0200 To: [email protected] From: Trying another account <[email protected]> Reply-to: Trying another account <[email protected]> Subject: . Message-ID: <[email protected]> X-Priority: 3 X-Mailer: PHPMailer 5.1 (phpmailer.sourceforge.net) MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="UTF-8" . I also tried: Adding a User-Agent header to match the first one. Removing the X-Mailer header. No one of them made a difference. Is there some significant difference which is making the second e-mail to be marked as spam by Google?

Read the article

Looking into the JQuery Overlays Plugin

- by nikolaosk

I have been using JQuery for a couple of years now and it has helped me to solve many problems on the client side of web development. You can find all my posts about JQuery in this link. In this post I will be providing you with a hands-on example on the JQuery Overlays Plugin.If you want you can have a look at this post, where I describe the JQuery Cycle Plugin.You can find another post of mine talking about the JQuery Carousel Lite Plugin here. Another post of mine regarding the JQuery Image Zoom Plugin can be found here.I will be writing more posts regarding the most commonly used JQuery Plugins. With the JQuery Overlays Plugin we can provide the user (overlay) with more information about an image when the user hovers over the image. I have been using extensively this plugin in my websites. In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like. You can use Visual Studio 2012 Express edition. You can download it here. You can download this plugin from this link. I launch Expression Web 4.0 and then I type the following HTML markup (I am using HTML 5) <html lang="en"> <head> <link rel="stylesheet" href="ImageOverlay.css" type="text/css" media="screen" /> <script type="text/javascript" src="jquery-1.8.3.min.js"></script> <script type="text/javascript" src="jquery.ImageOverlay.min.js"></script> <script type="text/javascript"> $(function () { $("#Liverpool").ImageOverlay(); }); </script> </head><body> <ul id="Liverpool" class="image-overlay"> <li> <a href="www.liverpoolfc.com"> <img alt="Liverpool" src="championsofeurope.jpg" /> <div class="caption"> <h3>Liverpool Football club</h3> <p>The greatest club in the world</p> </div> </a> </li> </ul></body></html> This is a very simple markup. I have added references to the JQuery library (current version is 1.8.3) and the JQuery Overlays Plugin. Then I add 1 image in the element with "id=Liverpool". There is a caption class as well, where I place the text I want to show when the mouse hovers over the image. The caption class and the Liverpool id element are styled in the ImageOverlay.css file that can also be downloaded with the plugin.You can style the various elements of the html markup in the .css file. The Javascript code that makes it all happen follows. <script type="text/javascript"> $(function () { $("#Liverpool").ImageOverlay(); }); </script> I am just calling the ImageOverlay function for the Liverpool ID element.The contents of ImageOverlay.css file follow .image-overlay { list-style: none; text-align: left; }.image-overlay li { display: inline; }.image-overlay a:link, .image-overlay a:visited, .image-overlay a:hover, .image-overlay a:active { text-decoration: none; }.image-overlay a:link img, .image-overlay a:visited img, .image-overlay a:hover img, .image-overlay a:active img { border: none; }.image-overlay a{ margin: 9px; float: left; background: #fff; border: solid 2px; overflow: hidden; position: relative;}.image-overlay img{ position: absolute; top: 0; left: 0; border: 0;}.image-overlay .caption{ float: left; position: absolute; background-color: #000; width: 100%; cursor: pointer; /* The way to change overlay opacity is the follow properties. Opacity is a tricky issue due to longtime IE abuse of it, so opacity is not offically supported - use at your own risk. To play it safe, disable overlay opacity in IE. */ /* For Firefox/Opera/Safari/Chrome */ opacity: .8; /* For IE 5-7 */ filter: progid:DXImageTransform.Microsoft.Alpha(Opacity=80); /* For IE 8 */ -MS-filter: "progid:DXImageTransform.Microsoft.Alpha(Opacity=80)";}.image-overlay .caption h1, .image-overlay .caption h2, .image-overlay .caption h3,.image-overlay .caption h4, .image-overlay .caption h5, .image-overlay .caption h6{ margin: 10px 0 10px 2px; font-size: 26px; font-weight: bold; padding: 0 0 0 5px; color:#92171a;}.image-overlay p{ text-indent: 0; margin: 10px; font-size: 1.2em;} It couldn't be any simpler than that. I view my simple page in Internet Explorer 10 and it works as expected. I have tested this simple solution in all major browsers and it works fine.Have a look at the picture below. You can test it yourself and see the results in your favorite browser. Hope it helps!!!

Read the article

<%: %>, HtmlEncode, IHtmlString and MvcHtmlString

- by Shaun

One of my colleague and friend, Robin is playing and struggling with the ASP.NET MVC 2 on a project these days while I’m struggling with a annoying client. Since it’s his first time to use ASP.NET MVC he was meetings with a lot of problem and I was very happy to share my experience to him. Yesterday he asked me when he attempted to insert a <br /> element into his page he found that the page was rendered like this which is bad. He found his <br /> was shown as a part of the string rather than creating a new line. After checked a bit in his code I found that it’s because he utilized a new ASP.NET markup supported in .NET 4.0 – “<%: %>”. If you have been using ASP.NET MVC 1 or in .NET 3.5 world it would be very common that using <%= %> to show something on the page from the backend code. But when you do it you must ensure that the string that are going to be displayed should be Html-safe, which means all the Html markups must be encoded. Otherwise this might cause an XSS (cross-site scripting) problem. So that you’d better use the code like this below to display anything on the page. In .NET 4.0 Microsoft introduced a new markup to solve this problem which is <%: %>. It will encode the content automatically so that you will no need to check and verify your code manually for the XSS issue mentioned below. But this also means that it will encode all things, include the Html element you want to be rendered. So I changed his code like this and it worked well. After helped him solved this problem and finished a spreadsheet for my boring project I considered a bit more on the <%: %>. Since it will encode all thing why it renders correctly when we use “<%: Html.TextBox(“name”) %>” to show a text box? As you know the Html.TextBox will render a “<input name="name" id="name" type="text"/>” element on the page. If <%: %> will encode everything it should not display a text box. So I dig into the source code of the MVC and found some comments in the class MvcHtmlString. 1: // In ASP.NET 4, a new syntax <%: %> is being introduced in WebForms pages, where <%: expression %> is equivalent to 2: // <%= HttpUtility.HtmlEncode(expression) %>. The intent of this is to reduce common causes of XSS vulnerabilities 3: // in WebForms pages (WebForms views in the case of MVC). This involves the addition of an interface 4: // System.Web.IHtmlString and a static method overload System.Web.HttpUtility::HtmlEncode(object). The interface 5: // definition is roughly: 6: // public interface IHtmlString { 7: // string ToHtmlString(); 8: // } 9: // And the HtmlEncode(object) logic is roughly: 10: // - If the input argument is an IHtmlString, return argument.ToHtmlString(), 11: // - Otherwise, return HtmlEncode(Convert.ToString(argument)). 12: // 13: // Unfortunately this has the effect that calling <%: Html.SomeHelper() %> in an MVC application running on .NET 4 14: // will end up encoding output that is already HTML-safe. As a result, we're changing out HTML helpers to return 15: // MvcHtmlString where appropriate. <%= Html.SomeHelper() %> will continue to work in both .NET 3.5 and .NET 4, but 16: // changing the return types to MvcHtmlString has the added benefit that <%: Html.SomeHelper() %> will also work 17: // properly in .NET 4 rather than resulting in a double-encoded output. MVC developers in .NET 4 will then be able 18: // to use the <%: %> syntax almost everywhere instead of having to remember where to use <%= %> and where to use 19: // <%: %>. This should help developers craft more secure web applications by default. 20: // 21: // To create an MvcHtmlString, use the static Create() method instead of calling the protected constructor. The comment said the encoding rule of the <%: %> would be: If the type of the content is IHtmlString it will NOT encode since the IHtmlString indicates that it’s Html-safe. Otherwise it will use HtmlEncode to encode the content. If we check the return type of the Html.TextBox method we will find that it’s MvcHtmlString, which was implemented the IHtmlString interface dynamically. That is the reason why the “<input name="name" id="name" type="text"/>” was not encoded by <%: %>. So if we want to tell ASP.NET MVC, or I should say the ASP.NET runtime that the content is Html-safe and no need, or should not be encoded we can convert the content into IHtmlString. So another resolution would be like this. Also we can create an extension method as well for better developing experience. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6: 7: namespace ShaunXu.Blogs.IHtmlStringIssue 8: { 9: public static class Helpers 10: { 11: public static MvcHtmlString IsHtmlSafe(this string content) 12: { 13: return MvcHtmlString.Create(content); 14: } 15: } 16: } Then the view would be like this. And the page rendered correctly. Summary In this post I explained a bit about the new markup in .NET 4.0 – <%: %> and its usage. I also explained a bit about how to control the page content, whether it should be encoded or not. We can see the ASP.NET MVC gives us more points to control the web pages. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Protecting Cookies: Once and For All

- by Your DisplayName here!

Every once in a while you run into a situation where you need to temporarily store data for a user in a web app. You typically have two options here – either store server-side or put the data into a cookie (if size permits). When you need web farm compatibility in addition – things become a little bit more complicated because the data needs to be available on all nodes. In my case I went for a cookie – but I had some requirements Cookie must be protected from eavesdropping (sent only over SSL) and client script Cookie must be encrypted and signed to be protected from tampering with Cookie might become bigger than 4KB – some sort of overflow mechanism would be nice I really didn’t want to implement another cookie protection mechanism – this feels wrong and btw can go wrong as well. WIF to the rescue. The session management feature already implements the above requirements but is built around de/serializing IClaimsPrincipals into cookies and back. But if you go one level deeper you will find the CookieHandler and CookieTransform classes which contain all the needed functionality. public class ProtectedCookie { private List<CookieTransform> _transforms; private ChunkedCookieHandler _handler = new ChunkedCookieHandler(); // DPAPI protection (single server) public ProtectedCookie() { _transforms = new List<CookieTransform> { new DeflateCookieTransform(), new ProtectedDataCookieTransform() }; } // RSA protection (load balanced) public ProtectedCookie(X509Certificate2 protectionCertificate) { _transforms = new List<CookieTransform> { new DeflateCookieTransform(), new RsaSignatureCookieTransform(protectionCertificate), new RsaEncryptionCookieTransform(protectionCertificate) }; } // custom transform pipeline public ProtectedCookie(List<CookieTransform> transforms) { _transforms = transforms; } public void Write(string name, string value, DateTime expirationTime) { byte[] encodedBytes = EncodeCookieValue(value); _handler.Write(encodedBytes, name, expirationTime); } public void Write(string name, string value, DateTime expirationTime, string domain, string path) { byte[] encodedBytes = EncodeCookieValue(value); _handler.Write(encodedBytes, name, path, domain, expirationTime, true, true, HttpContext.Current); } public string Read(string name) { var bytes = _handler.Read(name); if (bytes == null || bytes.Length == 0) { return null; } return DecodeCookieValue(bytes); } public void Delete(string name) { _handler.Delete(name); } protected virtual byte[] EncodeCookieValue(string value) { var bytes = Encoding.UTF8.GetBytes(value); byte[] buffer = bytes; foreach (var transform in _transforms) { buffer = transform.Encode(buffer); } return buffer; } protected virtual string DecodeCookieValue(byte[] bytes) { var buffer = bytes; for (int i = _transforms.Count; i > 0; i—) { buffer = _transforms[i - 1].Decode(buffer); } return Encoding.UTF8.GetString(buffer); } } HTH

Read the article

OData – The easiest service I can create: now with updates

- by Jon Dalberg

The other day I created a simple NastyWord service exposed via OData. It was read-only and used an in-memory backing store for the words. Today I’ll modify it to use a file instead of a list and I’ll accept new nasty words by implementing IUpdatable directly. The first thing to do is enable the service to accept new entries. This is done at configuration time by adding the “WriteAppend” access rule: 1: public class NastyWords : DataService<NastyWordsDataSource> 2: { 3: // This method is called only once to initialize service-wide policies. 4: public static void InitializeService(DataServiceConfiguration config) 5: { 6: config.SetEntitySetAccessRule("*", EntitySetRights.AllRead | EntitySetRights.WriteAppend); 7: config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; 8: } 9: } Next I placed a file, NastyWords.txt, in the “App_Data” folder and added a few *choice* words to start. This required one simple change to our NastyWordDataSource.cs file: 1: public NastyWordsDataSource() 2: { 3: UpdateFromSource(); 4: } 5: 6: private void UpdateFromSource() 7: { 8: var words = File.ReadAllLines(pathToFile); 9: NastyWords = (from w in words 10: select new NastyWord { Word = w }).AsQueryable(); 11: } Nothing too shocking here, just reading each line from the NastyWords.txt file and exposing them. Next, I implemented IUpdatable which comes with a boat-load of methods. We don’t need all of them for now since we are only concerned with allowing new values. Here are the methods we must implement, all the others throw a NotImplementedException: 1: public object CreateResource(string containerName, string fullTypeName) 2: { 3: var nastyWord = new NastyWord(); 4: pendingUpdates.Add(nastyWord); 5: return nastyWord; 6: } 7: 8: public object ResolveResource(object resource) 9: { 10: return resource; 11: } 12: 13: public void SaveChanges() 14: { 15: var intersect = (from w in pendingUpdates 16: select w.Word).Intersect(from n in NastyWords 17: select n.Word); 18: 19: if (intersect.Count() > 0) 20: throw new DataServiceException(500, "duplicate entry"); 21: 22: var lines = from w in pendingUpdates 23: select w.Word; 24: 25: File.AppendAllLines(pathToFile, 26: lines, 27: Encoding.UTF8); 28: 29: pendingUpdates.Clear(); 30: 31: UpdateFromSource(); 32: } 33: 34: public void SetValue(object targetResource, string propertyName, object propertyValue) 35: { 36: targetResource.GetType().GetProperty(propertyName).SetValue(targetResource, propertyValue, null); 37: } I use a simple list to contain the pending updates and only commit them when the “SaveChanges” method is called. Here’s the order these methods are called in our service during an insert: CreateResource – here we just instantiate a new NastyWord and stick a reference to it in our pending updates list. SetValue – this is where the “Word” property of the NastyWord instance is set. SaveChanges – get the list of pending updates, barfing on duplicates, write them to the file and clear our pending list. ResolveResource – the newly created resource will be returned directly here since we aren’t dealing with “handles” to objects but the actual objects themselves. Not too bad, eh? I didn’t find this documented anywhere but a little bit of digging in the OData spec and use of Fiddler made it pretty easy to figure out. Here is some client code which would add a new nasty word: 1: static void Main(string[] args) 2: { 3: var svc = new ServiceReference1.NastyWordsDataSource(new Uri("http://localhost.:60921/NastyWords.svc")); 4: svc.AddToNastyWords(new ServiceReference1.NastyWord() { Word = "shat" }); 5: 6: svc.SaveChanges(); 7: } Here’s all of the code so far for to implement the service: 1: using System; 2: using System.Collections.Generic; 3: using System.Data.Services; 4: using System.Data.Services.Common; 5: using System.Linq; 6: using System.ServiceModel.Web; 7: using System.Web; 8: using System.IO; 9: using System.Text; 10: 11: namespace ONasty 12: { 13: [DataServiceKey("Word")] 14: public class NastyWord 15: { 16: public string Word { get; set; } 17: } 18: 19: public class NastyWordsDataSource : IUpdatable 20: { 21: private List<NastyWord> pendingUpdates = new List<NastyWord>(); 22: private string pathToFile = @"path to your\App_Data\NastyWords.txt"; 23: 24: public NastyWordsDataSource() 25: { 26: UpdateFromSource(); 27: } 28: 29: private void UpdateFromSource() 30: { 31: var words = File.ReadAllLines(pathToFile); 32: NastyWords = (from w in words 33: select new NastyWord { Word = w }).AsQueryable(); 34: } 35: 36: public IQueryable<NastyWord> NastyWords { get; private set; } 37: 38: public void AddReferenceToCollection(object targetResource, string propertyName, object resourceToBeAdded) 39: { 40: throw new NotImplementedException(); 41: } 42: 43: public void ClearChanges() 44: { 45: pendingUpdates.Clear(); 46: } 47: 48: public object CreateResource(string containerName, string fullTypeName) 49: { 50: var nastyWord = new NastyWord(); 51: pendingUpdates.Add(nastyWord); 52: return nastyWord; 53: } 54: 55: public void DeleteResource(object targetResource) 56: { 57: throw new NotImplementedException(); 58: } 59: 60: public object GetResource(IQueryable query, string fullTypeName) 61: { 62: throw new NotImplementedException(); 63: } 64: 65: public object GetValue(object targetResource, string propertyName) 66: { 67: throw new NotImplementedException(); 68: } 69: 70: public void RemoveReferenceFromCollection(object targetResource, string propertyName, object resourceToBeRemoved) 71: { 72: throw new NotImplementedException(); 73: } 74: 75: public object ResetResource(object resource) 76: { 77: throw new NotImplementedException(); 78: } 79: 80: public object ResolveResource(object resource) 81: { 82: return resource; 83: } 84: 85: public void SaveChanges() 86: { 87: var intersect = (from w in pendingUpdates 88: select w.Word).Intersect(from n in NastyWords 89: select n.Word); 90: 91: if (intersect.Count() > 0) 92: throw new DataServiceException(500, "duplicate entry"); 93: 94: var lines = from w in pendingUpdates 95: select w.Word; 96: 97: File.AppendAllLines(pathToFile, 98: lines, 99: Encoding.UTF8); 100: 101: pendingUpdates.Clear(); 102: 103: UpdateFromSource(); 104: } 105: 106: public void SetReference(object targetResource, string propertyName, object propertyValue) 107: { 108: throw new NotImplementedException(); 109: } 110: 111: public void SetValue(object targetResource, string propertyName, object propertyValue) 112: { 113: targetResource.GetType().GetProperty(propertyName).SetValue(targetResource, propertyValue, null); 114: } 115: } 116: 117: public class NastyWords : DataService<NastyWordsDataSource> 118: { 119: // This method is called only once to initialize service-wide policies. 120: public static void InitializeService(DataServiceConfiguration config) 121: { 122: config.SetEntitySetAccessRule("*", EntitySetRights.AllRead | EntitySetRights.WriteAppend); 123: config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; 124: } 125: } 126: } Next time we’ll allow removing nasty words. Enjoy!

Read the article

(Unity)Getting a mirrored mesh from my data structure

- by Steve

Here's the background: I'm in the beginning stages of an RTS game in Unity. I have a procedurally generated terrain with a perlin-noise height map, as well as a function to generate a river. The problem is that the graphical creation of the map is taking the data structure of the map and rotating it by 180 degrees. I noticed this problem when i was creating my rivers. I would set the River's height to flat, and noticed that the actual tiles that were flat in the graphical representation were flipped and mirrored. Here's 3 screenshots of the map from different angles: http://imgur.com/a/VLHHq As you can see, if you flipped (graphically) the river by 180 degrees on the z axis, it would fit where the terrain is flattened. I have a suspicion it is being caused by a misunderstanding on my part of how vertices work. Alas, here is a snippet of the code that is used: This code here creates a new array of Tile objects, which hold the information for each tile, including its type, coordinate, height, and it's 4 vertices public DTileMap (int size_x, int size_y) { this.size_x = size_x; this.size_y = size_y; //Initialize Map_Data Array of Tile Objects map_data = new Tile[size_x, size_y]; for (int j = 0; j < size_y; j++) { for (int i = 0; i < size_x; i++) { map_data [i, j] = new Tile (); map_data[i,j].coordinate.x = (int)i; map_data[i,j].coordinate.y = (int)j; map_data[i,j].vertices[0] = new Vector3 (i * GTileMap.TileMap.tileSize, map_data[i,j].Height, -j * GTileMap.TileMap.tileSize); map_data[i,j].vertices[1] = new Vector3 ((i+1) * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j) * GTileMap.TileMap.tileSize); map_data[i,j].vertices[2] = new Vector3 (i * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j-1) * GTileMap.TileMap.tileSize); map_data[i,j].vertices[3] = new Vector3 ((i+1) * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j-1) * GTileMap.TileMap.tileSize); } } This code sets the river tiles to height 0 foreach (Tile t in map_data) { if (t.realType == "Water") { t.vertices[0].y = 0f; t.vertices[1].y = 0f; t.vertices[2].y = 0f; t.vertices[3].y = 0f; } } And below is the code to generate the actual graphics from the data: public void BuildMesh () { DTileMap.DTileMap map = new DTileMap.DTileMap (size_x, size_z); int numTiles = size_x * size_z; int numTris = numTiles * 2; int vsize_x = size_x + 1; int vsize_z = size_z + 1; int numVerts = vsize_x * vsize_z; // Generate the mesh data Vector3[] vertices = new Vector3[ numVerts ]; Vector3[] normals = new Vector3[numVerts]; Vector2[] uv = new Vector2[numVerts]; int[] triangles = new int[ numTris * 3 ]; int x, z; for (z=0; z < vsize_z; z++) { for (x=0; x < vsize_x; x++) { normals [z * vsize_x + x] = Vector3.up; uv [z * vsize_x + x] = new Vector2 ((float)x / size_x, 1f - (float)z / size_z); } } for (z=0; z < vsize_z; z+=1) { for (x=0; x < vsize_x; x+=1) { if (x == vsize_x - 1 && z == vsize_z - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x - 1, z - 1].vertices [3]; } else if (z == vsize_z - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x, z - 1].vertices [2]; } else if (x == vsize_x - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x - 1, z].vertices [1]; } else { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x, z].vertices [0]; vertices [z * vsize_x + x+1] = DTileMap.DTileMap.map_data [x, z].vertices [1]; vertices [(z+1) * vsize_x + x] = DTileMap.DTileMap.map_data [x, z].vertices [2]; vertices [(z+1) * vsize_x + x+1] = DTileMap.DTileMap.map_data [x, z].vertices [3]; } } } } for (z=0; z < size_z; z++) { for (x=0; x < size_x; x++) { int squareIndex = z * size_x + x; int triOffset = squareIndex * 6; triangles [triOffset + 0] = z * vsize_x + x + 0; triangles [triOffset + 2] = z * vsize_x + x + vsize_x + 0; triangles [triOffset + 1] = z * vsize_x + x + vsize_x + 1; triangles [triOffset + 3] = z * vsize_x + x + 0; triangles [triOffset + 5] = z * vsize_x + x + vsize_x + 1; triangles [triOffset + 4] = z * vsize_x + x + 1; } } // Create a new Mesh and populate with the data Mesh mesh = new Mesh (); mesh.vertices = vertices; mesh.triangles = triangles; mesh.normals = normals; mesh.uv = uv; // Assign our mesh to our filter/renderer/collider MeshFilter mesh_filter = GetComponent<MeshFilter> (); MeshCollider mesh_collider = GetComponent<MeshCollider> (); mesh_filter.mesh = mesh; mesh_collider.sharedMesh = mesh; calculateMeshTangents (mesh); BuildTexture (map); } If this looks familiar to you, its because i got most of it from Quill18. I've been slowly adapting it for my uses. And please include any suggestions you have for my code. I'm still in the very early prototyping stage.

Read the article

Box2D blocky map. Body, Fixtures a huge map and performance

- by Solom

Right now I'm still in the planning phase of a my very first game. I'm creating a "Minecraft"-like game in 2D that features blocks that can be destroyed as well as players moving around the map. For creating the map I chose a 2D-Array of Integers that represent the Block ID. For testing purposes I created a huge map (16348 * 256) and in my prototype that didn't use Box2D everything worked like a charm. I only rendered those blocks that where within the bounds of my camera and got 60 fps straight. The problem started when I decided to use an existing physics-solution rather than implementing my own one. What I had was basically simple hitboxes around the blocks and then I had to manually check if the player collided with any of those in his neighborhood. For more advanced physics as well as the collision detection I want to switch over to Box2D. The problem I have right now is ... how to go about the bodies? I mean, the blocks are of a static bodytype. They don't move on their own, they just are there to be collided with. But as far as I can see it, every block needs his own body with a rectangular fixture attached to it, so as to be destroyable. But for a huge map such as mine, this turns out to be a real performance bottle-neck. (In fact even a rather small map [compared to the other] of 1024*256 is unplayable.) I mean I create thousands of thousands of blocks. Even if I just render those that are in my immediate neighborhood there are hundreds of them and (at least with the debugRenderer) I drop to 1 fps really quickly (on my own "monster machine"). I thought about strategies like creating just one body, attaching multiple fixtures and only if a fixture got hit, separate it from the body, create a new one and destroy it, but this didn't turn out quite as successful as hoped. (In fact the core just dumps. Ah hello C! I really missed you :X) Here is the code: public class Box2DGameScreen implements Screen { private World world; private Box2DDebugRenderer debugRenderer; private OrthographicCamera camera; private final float TIMESTEP = 1 / 60f; // 1/60 of a second -> 1 frame per second private final int VELOCITYITERATIONS = 8; private final int POSITIONITERATIONS = 3; private Map map; private BodyDef blockBodyDef; private FixtureDef blockFixtureDef; private BodyDef groundDef; private Body ground; private PolygonShape rectangleShape; @Override public void show() { world = new World(new Vector2(0, -9.81f), true); debugRenderer = new Box2DDebugRenderer(); camera = new OrthographicCamera(); // Pixel:Meter = 16:1 // Body definition BodyDef ballDef = new BodyDef(); ballDef.type = BodyDef.BodyType.DynamicBody; ballDef.position.set(0, 1); // Fixture definition FixtureDef ballFixtureDef = new FixtureDef(); ballFixtureDef.shape = new CircleShape(); ballFixtureDef.shape.setRadius(.5f); // 0,5 meter ballFixtureDef.restitution = 0.75f; // between 0 (not jumping up at all) and 1 (jumping up the same amount as it fell down) ballFixtureDef.density = 2.5f; // kg / m² ballFixtureDef.friction = 0.25f; // between 0 (sliding like ice) and 1 (not sliding) // world.createBody(ballDef).createFixture(ballFixtureDef); groundDef = new BodyDef(); groundDef.type = BodyDef.BodyType.StaticBody; groundDef.position.set(0, 0); ground = world.createBody(groundDef); this.map = new Map(20, 20); rectangleShape = new PolygonShape(); // rectangleShape.setAsBox(1, 1); blockFixtureDef = new FixtureDef(); // blockFixtureDef.shape = rectangleShape; blockFixtureDef.restitution = 0.1f; blockFixtureDef.density = 10f; blockFixtureDef.friction = 0.9f; } @Override public void render(float delta) { Gdx.gl.glClearColor(1, 1, 1, 1); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); debugRenderer.render(world, camera.combined); drawMap(); world.step(TIMESTEP, VELOCITYITERATIONS, POSITIONITERATIONS); } private void drawMap() { for(int a = 0; a < map.getHeight(); a++) { /* if(camera.position.y - (camera.viewportHeight/2) > a) continue; if(camera.position.y - (camera.viewportHeight/2) < a) break; */ for(int b = 0; b < map.getWidth(); b++) { /* if(camera.position.x - (camera.viewportWidth/2) > b) continue; if(camera.position.x - (camera.viewportWidth/2) < b) break; */ /* blockBodyDef = new BodyDef(); blockBodyDef.type = BodyDef.BodyType.StaticBody; blockBodyDef.position.set(b, a); world.createBody(blockBodyDef).createFixture(blockFixtureDef); */ PolygonShape rectangleShape = new PolygonShape(); rectangleShape.setAsBox(1, 1, new Vector2(b, a), 0); blockFixtureDef.shape = rectangleShape; ground.createFixture(blockFixtureDef); rectangleShape.dispose(); } } } @Override public void resize(int width, int height) { camera.viewportWidth = width / 16; camera.viewportHeight = height / 16; camera.update(); } @Override public void hide() { dispose(); } @Override public void pause() { } @Override public void resume() { } @Override public void dispose() { world.dispose(); debugRenderer.dispose(); } } As you can see I'm facing multiple problems here. I'm not quite sure how to check for the bounds but also if the map is bigger than 24*24 like 1024*256 Java just crashes -.-. And with 24*24 I get like 9 fps. So I'm doing something really terrible here, it seems and I assume that there most be a (much more performant) way, even with Box2D's awesome physics. Any other ideas? Thanks in advance!

Read the article

Generating radial indicator images using C#

- by DigiMortal

In one of my projects I needed to draw radial indicators for processes measured in percent. Simple images like the one shown on right. I solved the problem by creating images in C# and saving them on server hard disc so if image is once generated then it is returned from disc next time. I am not master of graphics or geometrics but here is the code I wrote. Drawing radial indicator To get things done quick’n’easy way – later may some of younger developers be the one who may need to changes things – I divided my indicator drawing process to four steps shown below. 1. Fill pie 2. Draw circles 3. Fill inner circle 4. Draw text Drawing image Here is the code to draw indicators. private static void SaveRadialIndicator(int percent, string filePath) { using (Bitmap bitmap = new Bitmap(100, 100)) using (Graphics objGraphics = Graphics.FromImage(bitmap)) { // Initialize graphics objGraphics.Clear(Color.White); objGraphics.SmoothingMode = SmoothingMode.AntiAlias; objGraphics.TextRenderingHint = TextRenderingHint.ClearTypeGridFit; // Fill pie // Degrees are taken clockwise, 0 is parallel with x // For sweep angle we must convert percent to degrees (90/25 = 18/5) float startAngle = -90.0F; float sweepAngle = (18.0F / 5) * percent; Rectangle rectangle = new Rectangle(5, 5, 90, 90); objGraphics.FillPie(Brushes.Orange, rectangle, startAngle, sweepAngle); // Draw circles rectangle = new Rectangle(5, 5, 90, 90); objGraphics.DrawEllipse(Pens.LightGray, rectangle); rectangle = new Rectangle(20, 20, 60, 60); objGraphics.DrawEllipse(Pens.LightGray, rectangle); // Fill inner circle with white rectangle = new Rectangle(21, 21, 58, 58); objGraphics.FillEllipse(Brushes.White, rectangle); // Draw text on image // Use rectangle for text and align text to center of rectangle var font = new Font("Arial", 13, FontStyle.Bold); StringFormat stringFormat = new StringFormat(); stringFormat.Alignment = StringAlignment.Center; stringFormat.LineAlignment = StringAlignment.Center; rectangle = new Rectangle(20, 40, 62, 20); objGraphics.DrawString(percent + "%", font, Brushes.DarkGray, rectangle, stringFormat); // Save indicator to file objGraphics.Flush(); if (File.Exists(filePath)) File.Delete(filePath); bitmap.Save(filePath, ImageFormat.Png); } } Using indicators on web page To show indicators on your web page you can use the following code on page that outputs indicator images: protected void Page_Load(object sender, EventArgs e) { var percentString = Request.QueryString["percent"]; var percent = 0; if(!int.TryParse(percentString, out percent)) return; if(percent < 0 || percent > 100) return; var file = Server.MapPath("~/images/percent/" + percent + ".png"); if(!File.Exists(file)) SaveImage(percent, file); Response.Clear(); Response.ContentType = "image/png"; Response.WriteFile(file); Response.End(); } Om your pages where you need indicator you can set image source to Indicator.aspx (if you named your indicator handling file like this) and add percent as query string: <img src="Indicator.aspx?percent=30" /> That’s it! If somebody knows simpler way how to generate indicators like this I am interested in your feedback.

Read the article

OpenGL loading functions error [on hold]

- by Ghilliedrone

I'm new to OpenGL, and I bought a book on it for beginners. I finished writing the sample code for making a context/window. I get an error on this line at the part PFNWGLCREATECONTEXTATTRIBSARBPROC, saying "Error: expected a ')'": typedef HGLRC(APIENTRYP PFNWGLCREATECONTEXTATTRIBSARBPROC)(HDC, HGLRC, const int*); Replacing it or adding a ")" makes it error, but the error disappears when I use the OpenGL headers included in the books CD, which are OpenGL 3.0. I would like a way to make this work with the newest gl.h/wglext.h and without libraries. Here's the rest of the class if it's needed: #include <ctime> #include <windows.h> #include <iostream> #include <gl\GL.h> #include <gl\wglext.h> #include "Example.h" #include "GLWindow.h" typedef HGLRC(APIENTRYP PFNWGLCREATECONTEXTATTRIBSARBPROC)(HDC, HGLRC, const int*); PFNWGLCREATECONTEXTATTRIBSARBPROC wglCreateContextAttribsARB = NULL; bool GLWindow::create(int width, int height, int bpp, bool fullscreen) { DWORD dwExStyle; //Window Extended Style DWORD dwStyle; //Window Style m_isFullscreen = fullscreen;//Store the fullscreen flag m_windowRect.left = 0L; m_windowRect.right = (long)width; m_windowRect.top = 0L; m_windowRect.bottom = (long)height;//Set bottom to height // fill out the window class structure m_windowClass.cbSize = sizeof(WNDCLASSEX); m_windowClass.style = CS_HREDRAW | CS_VREDRAW; m_windowClass.lpfnWndProc = GLWindow::StaticWndProc; //We set our static method as the event handler m_windowClass.cbClsExtra = 0; m_windowClass.cbWndExtra = 0; m_windowClass.hInstance = m_hinstance; m_windowClass.hIcon = LoadIcon(NULL, IDI_APPLICATION); // default icon m_windowClass.hCursor = LoadCursor(NULL, IDC_ARROW); // default arrow m_windowClass.hbrBackground = NULL; // don't need background m_windowClass.lpszMenuName = NULL; // no menu m_windowClass.lpszClassName = (LPCWSTR)"GLClass"; m_windowClass.hIconSm = LoadIcon(NULL, IDI_WINLOGO); // windows logo small icon if (!RegisterClassEx(&m_windowClass)) { MessageBox(NULL, (LPCWSTR)"Failed to register window class", NULL, MB_OK); return false; } if (m_isFullscreen)//If we are fullscreen, we need to change the display { DEVMODE dmScreenSettings; //Device mode memset(&dmScreenSettings, 0, sizeof(dmScreenSettings)); dmScreenSettings.dmSize = sizeof(dmScreenSettings); dmScreenSettings.dmPelsWidth = width; //Screen width dmScreenSettings.dmPelsHeight = height; //Screen height dmScreenSettings.dmBitsPerPel = bpp; //Bits per pixel dmScreenSettings.dmFields = DM_BITSPERPEL | DM_PELSWIDTH | DM_PELSHEIGHT; if (ChangeDisplaySettings(&dmScreenSettings, CDS_FULLSCREEN) != DISP_CHANGE_SUCCESSFUL) { MessageBox(NULL, (LPCWSTR)"Display mode failed", NULL, MB_OK); m_isFullscreen = false; } } if (m_isFullscreen) //Is it fullscreen? { dwExStyle = WS_EX_APPWINDOW; //Window Extended Style dwStyle = WS_POPUP; //Windows Style ShowCursor(false); //Hide mouse pointer } else { dwExStyle = WS_EX_APPWINDOW | WS_EX_WINDOWEDGE; //Window Exteneded Style dwStyle = WS_OVERLAPPEDWINDOW; //Windows Style } AdjustWindowRectEx(&m_windowRect, dwStyle, false, dwExStyle); //Adjust window to true requested size //Class registered, so now create window m_hwnd = CreateWindowEx(NULL, //Extended Style (LPCWSTR)"GLClass", //Class name (LPCWSTR)"Chapter 2", //App name dwStyle | WS_CLIPCHILDREN | WS_CLIPSIBLINGS, 0, 0, //x, y coordinates m_windowRect.right - m_windowRect.left, m_windowRect.bottom - m_windowRect.top, //Width and height NULL, //Handle to parent NULL, //Handle to menu m_hinstance, //Application instance this); //Pass a pointer to the GLWindow here //Check if window creation failed, hwnd would equal NULL if (!m_hwnd) { return 0; } m_hdc = GetDC(m_hwnd); ShowWindow(m_hwnd, SW_SHOW); UpdateWindow(m_hwnd); m_lastTime = GetTickCount() / 1000.0f; return true; } LRESULT CALLBACK GLWindow::StaticWndProc(HWND hWnd, UINT uMsg, WPARAM wParam, LPARAM lParam) { GLWindow* window = nullptr; //If this is the create message if (uMsg == WM_CREATE) { //Get the pointer we stored during create window = (GLWindow*)((LPCREATESTRUCT)lParam)->lpCreateParams; //Associate the window pointer with the hwnd for the other events to access SetWindowLongPtr(hWnd, GWL_USERDATA, (LONG_PTR)window); } else { //If this is not a creation event, then we should have stored a pointer to the window window = (GLWindow*)GetWindowLongPtr(hWnd, GWL_USERDATA); if (!window) { //Do the default event handling return DefWindowProc(hWnd, uMsg, wParam, lParam); } } //Call our window's member WndProc(allows us to access member variables) return window->WndProc(hWnd, uMsg, wParam, lParam); } LRESULT GLWindow::WndProc(HWND hWnd, UINT uMsg, WPARAM wParam, LPARAM lParam) { switch (uMsg) { case WM_CREATE: { m_hdc = GetDC(hWnd); setupPixelFormat(); //Set the version that we want, in this case 3.0 int attribs[] = { WGL_CONTEXT_MAJOR_VERSION_ARB, 3, WGL_CONTEXT_MINOR_VERSION_ARB, 0, 0}; //Create temporary context so we can get a pointer to the function HGLRC tmpContext = wglCreateContext(m_hdc); //Make the context current wglMakeCurrent(m_hdc, tmpContext); //Get the function pointer wglCreateContextAttribsARB = (PFNWGLCREATECONTEXTATTRIBSARBPROC)wglGetProcAddress("wglCreateContextAttribsARB"); //If this is NULL then OpenGl 3.0 is not supported if (!wglCreateContextAttribsARB) { MessageBox(NULL, (LPCWSTR)"OpenGL 3.0 is not supported", (LPCWSTR)"An error occured", MB_ICONERROR | MB_OK); DestroyWindow(hWnd); return 0; } //Create an OpenGL 3.0 context using the new function m_hglrc = wglCreateContextAttribsARB(m_hdc, 0, attribs); //Delete the temporary context wglDeleteContext(tmpContext); //Make the GL3 context current wglMakeCurrent(m_hdc, m_hglrc); m_isRunning = true; } break; case WM_DESTROY: //Window destroy case WM_CLOSE: //Windows is closing wglMakeCurrent(m_hdc, NULL); wglDeleteContext(m_hglrc); m_isRunning = false; //Stop the main loop PostQuitMessage(0); break; case WM_SIZE: { int height = HIWORD(lParam); //Get height and width int width = LOWORD(lParam); getAttachedExample()->onResize(width, height); //Call the example's resize method } break; case WM_KEYDOWN: if (wParam == VK_ESCAPE) //If the escape key was pressed { DestroyWindow(m_hwnd); } break; default: break; } return DefWindowProc(hWnd, uMsg, wParam, lParam); } void GLWindow::processEvents() { MSG msg; //While there are messages in the queue, store them in msg while (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE)) { //Process the messages TranslateMessage(&msg); DispatchMessage(&msg); } } Here is the header: #pragma once #include <ctime> #include <windows.h> class Example;//Declare our example class class GLWindow { public: GLWindow(HINSTANCE hInstance); //default constructor bool create(int width, int height, int bpp, bool fullscreen); void destroy(); void processEvents(); void attachExample(Example* example); bool isRunning(); //Is the window running? void swapBuffers() { SwapBuffers(m_hdc); } static LRESULT CALLBACK StaticWndProc(HWND wnd, UINT msg, WPARAM wParam, LPARAM lParam); LRESULT CALLBACK WndProc(HWND wnd, UINT msg, WPARAM wParam, LPARAM lParam); float getElapsedSeconds(); private: Example* m_example; //A link to the example program bool m_isRunning; //Is the window still running? bool m_isFullscreen; HWND m_hwnd; //Window handle HGLRC m_hglrc; //Rendering context HDC m_hdc; //Device context RECT m_windowRect; //Window bounds HINSTANCE m_hinstance; //Application instance WNDCLASSEX m_windowClass; void setupPixelFormat(void); Example* getAttachedExample() { return m_example; } float m_lastTime; };

Read the article

Getting a mirrored mesh from my data structure

- by Steve

Here's the background: I'm in the beginning stages of an RTS game in Unity. I have a procedurally generated terrain with a perlin-noise height map, as well as a function to generate a river. The problem is that the graphical creation of the map is taking the data structure of the map and rotating it by 180 degrees. I noticed this problem when I was creating my rivers. I would set the River's height to flat, and noticed that the actual tiles that were flat in the graphical representation were flipped and mirrored. Here's 3 screenshots of the map from different angles: http://imgur.com/a/VLHHq As you can see, if you flipped (graphically) the river by 180 degrees on the z axis, it would fit where the terrain is flattened. I have a suspicion it is being caused by a misunderstanding on my part of how vertices work. Alas, here is a snippet of the code that is used: This code here creates a new array of Tile objects, which hold the information for each tile, including its type, coordinate, height, and it's 4 vertices public DTileMap (int size_x, int size_y) { this.size_x = size_x; this.size_y = size_y; //Initialize Map_Data Array of Tile Objects map_data = new Tile[size_x, size_y]; for (int j = 0; j < size_y; j++) { for (int i = 0; i < size_x; i++) { map_data [i, j] = new Tile (); map_data[i,j].coordinate.x = (int)i; map_data[i,j].coordinate.y = (int)j; map_data[i,j].vertices[0] = new Vector3 (i * GTileMap.TileMap.tileSize, map_data[i,j].Height, -j * GTileMap.TileMap.tileSize); map_data[i,j].vertices[1] = new Vector3 ((i+1) * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j) * GTileMap.TileMap.tileSize); map_data[i,j].vertices[2] = new Vector3 (i * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j-1) * GTileMap.TileMap.tileSize); map_data[i,j].vertices[3] = new Vector3 ((i+1) * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j-1) * GTileMap.TileMap.tileSize); } } This code sets the river tiles to height 0 foreach (Tile t in map_data) { if (t.realType == "Water") { t.vertices[0].y = 0f; t.vertices[1].y = 0f; t.vertices[2].y = 0f; t.vertices[3].y = 0f; } } And below is the code to generate the actual graphics from the data: public void BuildMesh () { DTileMap.DTileMap map = new DTileMap.DTileMap (size_x, size_z); int numTiles = size_x * size_z; int numTris = numTiles * 2; int vsize_x = size_x + 1; int vsize_z = size_z + 1; int numVerts = vsize_x * vsize_z; // Generate the mesh data Vector3[] vertices = new Vector3[ numVerts ]; Vector3[] normals = new Vector3[numVerts]; Vector2[] uv = new Vector2[numVerts]; int[] triangles = new int[ numTris * 3 ]; int x, z; for (z=0; z < vsize_z; z++) { for (x=0; x < vsize_x; x++) { normals [z * vsize_x + x] = Vector3.up; uv [z * vsize_x + x] = new Vector2 ((float)x / size_x, 1f - (float)z / size_z); } } for (z=0; z < vsize_z; z+=1) { for (x=0; x < vsize_x; x+=1) { if (x == vsize_x - 1 && z == vsize_z - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x - 1, z - 1].vertices [3]; } else if (z == vsize_z - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x, z - 1].vertices [2]; } else if (x == vsize_x - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x - 1, z].vertices [1]; } else { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x, z].vertices [0]; vertices [z * vsize_x + x+1] = DTileMap.DTileMap.map_data [x, z].vertices [1]; vertices [(z+1) * vsize_x + x] = DTileMap.DTileMap.map_data [x, z].vertices [2]; vertices [(z+1) * vsize_x + x+1] = DTileMap.DTileMap.map_data [x, z].vertices [3]; } } } } for (z=0; z < size_z; z++) { for (x=0; x < size_x; x++) { int squareIndex = z * size_x + x; int triOffset = squareIndex * 6; triangles [triOffset + 0] = z * vsize_x + x + 0; triangles [triOffset + 2] = z * vsize_x + x + vsize_x + 0; triangles [triOffset + 1] = z * vsize_x + x + vsize_x + 1; triangles [triOffset + 3] = z * vsize_x + x + 0; triangles [triOffset + 5] = z * vsize_x + x + vsize_x + 1; triangles [triOffset + 4] = z * vsize_x + x + 1; } } // Create a new Mesh and populate with the data Mesh mesh = new Mesh (); mesh.vertices = vertices; mesh.triangles = triangles; mesh.normals = normals; mesh.uv = uv; // Assign our mesh to our filter/renderer/collider MeshFilter mesh_filter = GetComponent<MeshFilter> (); MeshCollider mesh_collider = GetComponent<MeshCollider> (); mesh_filter.mesh = mesh; mesh_collider.sharedMesh = mesh; calculateMeshTangents (mesh); BuildTexture (map); } If this looks familiar to you, its because i got most of it from Quill18. I've been slowly adapting it for my uses. And please include any suggestions you have for my code. I'm still in the very early prototyping stage.

Read the article

2 javascripts problem

- by pradeep

<?php global $user; $userId = $user->uid; /* start with default */ $myresult = ""; /* All Includes - start */ include_once('db.php'); include_once('valid-scripts/validateData.php'); /* All Includes - end */ /* Build All required Variables - start */ $alias = $_GET['alias']; $product = $_GET['product']; $product = strtolower(substr($product,0,-1)); $master_table = $product.'_master'; $rating_master_table = $product.'_rating_master'; $rating_table = $product.'_rating'; $numProperties = 15; /* Build All required Variables - end */ /* Add all Styles required - start */ $myresult .= '<link href="/jquery.rating.css" type="text/css" rel="stylesheet"/>'; /* Add all Styles required - end */ /* Show Hide Variables/parameters - start */ include_once('all_include_files/show_hide.php'); /* Show Hide Variables/parameters - end */ /* All Javascript - start */ //$myresult .= '<script src="/jquery.rating.js" type="text/javascript" language="javascript"></script>'; ?> <style> #tabs { //font-size: 90%; //margin: 20px 0; margin: 2px 0; } #tabs ul { float: right; background: #E3FEFA; width: 600px; //padding-top: 4px; } #tabs li { margin-left: 8px; list-style: none; } * html #tabs li { display: inline; /* ie6 double float margin bug */ } #tabs li, #tabs li a { float: left; } #tabs ul li a { text-decoration: none; //padding: 8px; color: #0073BF; font-weight: bold; } #tabs ul li.active { background: #CEE1EF url(/all_include_files/img/nav-right.gif) no-repeat right top; } #tabs ul li.active a { background: url(/all_include_files/img/nav-left.gif) no-repeat left top; color: #333333; } #tabs div { //background: #CEE1EF; clear: both; //padding: 20px; min-height: 200px; } #tabs div h3 { text-transform: uppercase; margin-bottom: 10px; letter-spacing: 1px; #tabs div p { line-height: 150%; } </style> <script src="/jquery.rating.js" type="text/javascript" language="javascript"></script> <script src="/jquery.metadata.js" type="text/javascript" language="javascript"></script> <script type='text/javascript'> function openComment(number) { alert('working'); $('#comment'+number).css('display',''); } $('.star').rating({ callback: function(value, link){ alert(value); } }); $(document).ready(function() { //$('#tabs div').hide(); //$('#tabs div:first').show(); $('#tabs ul li:first').addClass('active'); $('#tabs ul li a').click(function() { $('#tabs ul li').removeClass('active'); $(this).parent().addClass('active'); var currentTab = $(this).attr('href'); $('#tabs div').hide(); $(currentTab).show(); return false; }); $("#clickit").click(function() { $.post("/mobile/tablechange.php",{ p1:'<?php echo $brand ?>',p2:'<?php echo $model ?>',userid:'<?php echo $userid ?>' } ,function(data){ $("#changetable").html(data); }); }); $('div.expandable p').expander({ slicePoint: 200, // default is 100 expandText: 'more »', // default is 'read more...' collapseTimer: 0, // re-collapses after 5 seconds; default is 0, so no re-collapsing userCollapseText: '[^]' // default is '[collapse expanded text]' }); }); </script> <?php /* All Javascript - end */ /* Form Processing after submit - start */ /* Form Processing after submit - end */ /* Actual Form or Page - start */ /*fetch all data needed */ /* initial query */ $result_product = query_product_table($product,$alias); /*fetch property names of product */ $product_properties = master_table($master_table); /*rating table query */ $master_rating_properties = master_rating_table($rating_master_table); /*get user ratings*/ $user_ratings = user_ratings($userId,$alias,$rating_table); $myresult .= '<div class=\'Services\'>'; //$myresult .="<form name ='form1' id='form1' method = 'POST' action='".$_SERVER['php_self'] ."'>"; if(!$result_product) { header('Location: /page-not-found'); } else { $row_product = mysql_fetch_array($result_product); $myresult .= "<h3 class='newstyle'>".$row_product['alias']." <a style='float:right;padding-right:20px;color:white;text-decoration:underline;' href='/'>Back</a> </h3>"; /* start actual product display - start*/ $myresult .= "<div class=\"product\">"; /* start table 1*/ $myresult .= '<table border=\'0\' cellspacing=\'0\' cellpadding=\'0\' style=\'width:580px; table-layout:fixed;\'>'; $myresult .= '<tr>'; $myresult .='<td valign=\'top\'>'; /* start table 2*/ $myresult .='<table width=\'100%\' border=\'0\' cellspacing=\'0\' cellpadding=\'0\'>'; $myresult .= '<tr>'; $myresult .= '<td valign=\'top\' style=\'width:164px;\'>'; /* start table 3*/ $myresult .= '<table style=\'width:164px;\' border=\'0\' cellspacing=\'0\' cellpadding=\'0\'>'; $myresult .= "<tr>"; /* start of the pic row */ $myresult .= '<td align=\'center\' class=\'various_product\'>'; if($row_product['pic'] != "") { $myresult .= '<ul id=\'mycarousel\' style=\'display:\';>'; $myresult .= '<li><a href=\'/all_image_scripts/origpicdisplay.php?product='.rawurlencode($product).'&alias='.rawurlencode($alias).'&picid=pic&p= \'rel=\'lightbox[roadtrip]\'><img src=\'/all_image_scripts/picdisplay1.php?product='.rawurlencode($product).'&alias='.rawurlencode($alias).'\'></img></a></li>'; for($p = 1; $p <= 4; $p++) { if($row_product['pic'.$p] != "") { $myresult .= '<li><a href=\'/all_image_scripts/origpicdisplay.php?product='.rawurlencode($product).'&alias='.rawurlencode($alias).'&picid=pic'.rawurlencode($p).'&p='.rawurlencode($p).'\' rel=\'lightbox[roadtrip]\'><img src=\'/all_image_scripts/thumbpicdisplay.php?product='.rawurlencode($product).'&alias='.rawurlencode($alias).'&picid=pic'.rawurlencode($p).'\'></img></a></li>'; } } $myresult .= '</ul>'; } else { $myresult .= "<img width='50' height='70' src='/images/no-image.gif'></img>"; } jcarousel_add('#mycarousel', array('horizontal' => TRUE,'scroll' => 1,'visible' => 1)); $myresult .= "</td>"; /* end display of pic td*/ $myresult .= "</tr>"; /* end display of pic tr*/ $myresult .= "</table></td>"; /* end display of pic table and earlier td - Still 1 open TR td table tr -hint*/ $myresult .= '<td style=\'width:450px;\'>'; /*table - 4*/ $myresult .= '<table width=\'100%\' border=\'0\' cellspacing=\'0\' cellpadding=\'0\' style=\'display:block;\'>'; /* Start showing property and values */ $myresult .= '<tr>'; $myresult .= '<td class=\'tick\'><img src=\'/images/ul_li_bg.gif\' width=\'12\' height=\'12\' /></td>'; $myresult .= '<td class=\'leftText\'>'.ucfirst($product).':</td>'; $myresult .= '<td class=\'rightText\'>'.$row_product['alias'] .'</td>'; $myresult .= "</tr>"; for($j = 3; $j <= 5 ; $j++){ if($product_properties['property'.$j.'_name'] != "") { if($row_product['property'.$j] != "") { $myresult .= '<tr>'; $myresult .= '<td class=\'tick\'><img src=\'/images/ul_li_bg.gif\' width=\'12\' height=\'12\' /></td>'; $myresult .= '<td class=\'leftText\'>'.$product_properties['property'.$j.'_name'].':</td>'; $myresult .= '<td class=\'rightText\'>'.$row_product['property'.$j] .'</td>'; $myresult .= '</tr>'; } /* end if*/ } /* end if*/ } /* end for*/ /* show hide block */ $myresult .= '<tbody id=\'extra_properties\' style=\'display: none;\'>'; for($j = 6; $j <= 15 ; $j++){ if($product_properties['property'.$j.'_name'] != "") { if($row_product['property'.$j] != "") { $myresult .= '<tr>'; $myresult .= '<td class=\'tick\'><img src=\'/images/ul_li_bg.gif\' width=\'12\' height=\'12\' /></td>'; $myresult .= '<td class=\'leftText\'>'.$produtc_properties['property'.$j.'_name'].':</td>'; $myresult .= '<td class=\'rightText\'>'.$row_product['property'.$j] .'</td>'; $myresult .= '</tr>'; } /* end if*/ } /* end if*/ } /* end for */ $myresult .= '</tbody>'; /* end show/hide tbody */ $myresult .= '<tr>'; $myresult .= '<td>'; $myresult .= ' '; $myresult .= '</td>'; $myresult .= '<td>'; $myresult .= ' '; $myresult .= '</td>'; $myresult .= '<td align=\'right\' style=\'text-align:right;text-decoration:underline;\'>'; $myresult .= '<a class=\'right_link\' href=\'javascript:showMore()\'>Show Additional Details...</a>'; $myresult .= '</td>'; $myresult .= '</tr>'; /* End showing property and values */ $showreview = 'display:'; /* review show hide */ /*$myresult .= '<tbody '.$showreview.'>'; $myresult .= '<tr>'; $myresult .= '<td colspan=\'2\'><span class=\'reviews\'>'; //check //$numreviews = getreviewcount($brand,$model,'mobile_user_reviews'); if($numreviews > 0) { $myresult .= '<a href=\'mobilereviews?alias='.rawurlencode($alias).'\'> <span>$numreviews Reviews</span></a>'; } else { $myresult .= " $numreviews Reviews"; } $myresult .= "</span></td>"; $myresult .= "</tr>"; */ $myresult .= "</tbody>"; /* review show hide - end */ /* count show hide */ $myresult .= '<tbody '.$showcount.'>'; $myresult .= '<tr>'; $myresult .= '<td colspan=\'2\'><span class=\'reviews\'>'; //check //$totalvotes = gettotalvotes($row['property1'],$row['property2'],'mobile_rating'); $myresult .= "</td>"; $myresult .= "</tr>"; $myresult .= "</tbody>"; /* count show hide - end */ $myresult .= "</table></td>"; /* end table 4 */ $myresult .= '</tr>'; /* end 1 row and remaining tr , td ,table */ $myresult .= '</table></td>'; $myresult .= '</tr>'; /* remianing only 1 table */ /* ratings - positive last section starts here */ $max= array(); for ($l = 1 ; $l < 15; $l++){ if($row_product['property'.$l.'_avg']){ $maxarray = 0; $maxarray = $row_product['property'.$l.'_avg']; $max['rating'.$l.'_name'] = $maxarray; } } if(count($max) >0 ) { include('all_include_files/min_max_properties.php'); } if(($row_product['freshness'] <= strtotime("-3 month"))) { $image_type= 'old'; } else if(($row_product['freshness'] <= strtotime("-2 month"))) { $image_type= 'bitold'; } else if(($row_product['freshness'] <= strtotime("-1 month")) || ($row_product['freshness'] > strtotime("-1 month"))) { $image_type= 'new'; } $img_name = $image_type; $myresult .= "<tr>"; $myresult .= "<td>"; $myresult .= "<table width='100%' border='0'>"; $myresult .= "<tr>"; $myresult .= "<td width='170' class=\"ratingz\"><span><u>Overall rating</u></span></td>"; $myresult .= "<td width='150' class=\"ratingz\"><span><u>Positive</u></span></td>"; $myresult .= "<td width='150' class=\"ratingz\"><span><u>Negative</u></span></td>"; if($img_name == 'new'){ $images = "<img src='/sites/default/files/battery-discharging-100.png' width='40' height='40'></img>"; } else if($img_name == 'bitold'){ $images = "<img src='/sites/default/files/battery-discharging-80.png' width='40' height='40'></img>"; } else if($img_name == 'old'){ $images = "<img src='/sites/default/files/battery-discharging-0.png' width='40' height='40'></img>"; } else { $images = ""; } $myresult .= "<td rowspan='2'><p ".$showbattery.">". $images ."</p></td>"; $myresult .= "</tr>"; $myresult .= "<tr>"; $myresult .= "<td>"; $i++; for($k = 0.5; $k <= 10.0; $k+=0.5) { $overall = roundOff($row_product['overall_rating']); if($overall == $k) { $chk ="checked"; } else { $chk = ""; } $myresult .= '<input class=\'star {split:2}\' type=\'radio\' value=\''. $k .'\' '.$chk.' title=\''. $k.' out of 10 \' disabled />'; } $myresult .= '</td>'; $myresult .= '<td ><span>'.$positive.'</span></td>'; $myresult .= '<td ><span>'.$negative.'</span></td>'; $myresult .= '</tr>'; $myresult .= '</table></td>'; $myresult .= '</tr>'; /* ratings - positive last section ends here */ $myresult .= '<tr>'; if($row_product['description'] != ""){ if(words_count($row_product['description']) > 8){ $myresult .= '<td><p><span class=\'description\'><strong><u>Description</u>:</strong></span>   <div class=\'expandable\'><p>'.$row_product['description'].'</div></p></p></td>'; } else { $myresult .= '<td><p><span class=\'description\'><strong><u>Description</u>:</strong></span>  '. $row_product['description'] .'</p></td>'; } } $myresult .= '</tr>'; $myresult .= '</table>'; /* end 1st table */ $myresult .= '</div>'; /* start actual product display - end*/ /*start the form to take ratings */ $myresult .= '<div id=\'tabs\'>'; $myresult .= '<ul>'; $myresult .= '<li><a href=\'#tab-1\'>Ratings</a></li>'; $myresult .= '<li><a href=\'#tab-2\'>Click here to rate</a></li>'; $myresult .= '</ul>'; $myresult .= '<div id=\'tab-1\'>'; /* actual rating table - start - jsut display ratings */ $myresult .= '<table id=\'rounded-corner\'>'; /* thead - start */ $myresult .= '<thead>'; $myresult .= '<tr>'; $myresult .= '<th width=\'30%\' class=\'rounded-company\' scope=\'col\'><span style=\'font: normal 18px Arial, Helvetica, sans-serif; color:#FFF;\'>Ratings</span></th>'; $myresult .= '<th width=\'70%\' colspan=\'2\'class=\'rounded-q4\' scope=\'col\'><a href=\'#rounded-corner\' id=\'clickit\' style=\'color:white;text-decoration:underline;\' $disabled ></a></th> '; /*$myresult .= '<th width=\'70%\' colspan=\'2\'class=\'rounded-q4\' scope=\'col\'><a href=\'#rounded-corner\' id=\'clickit\' style=\'color:white;text-decoration:underline;\' $disabled >Click here to rate</a></th> ';*/ $myresult .= '</tr>'; $myresult .= '</thead>'; /* thead - end */ /* tbody - start */ $myresult .= '<tbody>'; /*start printing the table wth feature and ratings */ for ($i = 1 ; $i < $numProperties; $i++){ if($master_rating_properties['rating'.$i.'_name']){ $myresult .= '<tr>'; $myresult .= '<td width=\'22%\'>'; $indfeature = 0; $indfeature = $row_product['property'.$i.'_avg']; $myresult .= $master_rating_properties['rating'.$i.'_name'].' ( '.$indfeature .')'; $myresult .= '</td>'; $myresult .= '<td colspan=\'0\' width=\'38%\' >'; $tocheck = $indfeature; for($k = 0.5; $k <= 10.0; $k+=0.5){ $tocheck = roundOff($tocheck); if(($tocheck) == $k) { $chk = "checked"; } else { $chk = ""; } $myresult .= '<input class=\'star {split:2}\' type=\'radio\' name=\'drating'.$i.'\' id=\'drating'.$i.''.$k.'\' value=\''. $k .'\' '.$chk.' title=\''. $k.' out of 10 \' disabled \'/>'; } /* for k loop end */ $myresult .= '</tr>'; } /* end if loop */ } /* end i for loop */ $myresult .= '</tbody>'; /* end tbody */ /* footer round corner start */ $myresult .= '<tfoot>'; $myresult .= '<tr>'; $myresult .= '<td class=\'rounded-foot-left\'> </td>'; $myresult .= '<td class=\'rounded-foot-right\' colspan=\'4\' >'; $myresult .= '</td>'; $myresult .= '</tr>'; $myresult .= '</tfoot>'; $myresult .= '</table>'; /*round corner table end */ $myresult .= '</div>'; /*end 1st tab */ /*start 2nd tab */ $myresult .= '<div id=\'tab-2\'>'; $myresult .= '<form name =\'form1\' id=\'form1\' method = \'POST\' action=\''.$_SERVER['php_self'] .'\'>'; /* actual rating table - start - actual rate/update */ $myresult .= '<table id=\'rounded-corner\'>'; /* thead - start */ $myresult .= '<thead>'; $myresult .= '<tr>'; $myresult .= '<th width=\'30%\' class=\'rounded-company\' scope=\'col\'><span style=\'font: normal 18px Arial, Helvetica, sans-serif; color:#FFF;\'>Ratings</span></th>'; $myresult .= '<th width=\'70%\' colspan=\'2\'class=\'rounded-q4\' scope=\'col\'></th>'; $myresult .= '</tr>'; $myresult .= '</thead>'; /* thead - end */ /* tbody - start */ $myresult .= '<tbody>'; unset($i); /*start printing the table wth feature and ratings */ for ($i = 1 ; $i < $numProperties; $i++){ if($master_rating_properties['rating'.$i.'_name']){ $myresult .= '<tr>'; /*fetch ratings and comments - 1st make it to null */ $indfeature = 0; $comment = ''; $indfeature = $user_ratings['rating'.$i]; if($indfeature == NULL){ $indfeature = 0; } $comment = $user_ratings['rating'.$i.'_comment']; $myresult .= '<td width=\'22%\'>'; $myresult .= $master_rating_properties['rating'.$i.'_name'].' ( '.$indfeature.' )'; $myresult .= '</td>'; $myresult .= '<td colspan=\'0\' width=\'38%\' >'; if(($userId != '0') && (is_array($user_ratings))) { $tocheck = $indfeature; } else { $tocheck = '0'; } for($k = 0.5; $k <= 10.0; $k+=0.5){ $tocheck = roundOff($tocheck); if(($tocheck) == $k) { $chk = "checked"; } else { $chk = ""; } $myresult .= '<input class=\'star {split:2}\' type=\'radio\' name=\'rating'.$i.'\' id=\'rating'.$i.''.$k.'\' value=\''. $k .'\' '.$chk.' title=\''. $k.' out of 10 \' '.$disabled.' \' />'; } /* for k loop end */ $myresult .= '</td>'; $myresult .= '<td width=\'40%\'>'; $myresult .= '<input title=\'Reason for this Rating.. \'type=\'text\' size=\'25\' name=\'comment'.$i.'\' id=\'comment'.$i.'\' style=\'display:;\' maxlength=\'255\' value="'.$comment.'">'; $myresult .= '</td>'; $myresult .= '</tr>'; } /* end if loop */ } /* end i for loop */ $myresult .= '</tbody>'; /* end tbody */ /* footer round corner start */ $myresult .= '<tfoot>'; $myresult .= '<tr>'; $myresult .= '<td class=\'rounded-foot-left\'> </td>'; $myresult .= '<td class=\'rounded-foot-right\' colspan=\'4\' >'; if(($userId != '0') && (is_array($user_ratings))) { $myresult .= '<input type=\'button\' id=\'update_form\' value=\'Update\'>'; } else { $myresult .= '<input type=\'button\' id=\'save_form\' value=\'Save\'>'; } $myresult .= '</td>'; $myresult .= '</tr>'; $myresult .= '</tfoot>'; $myresult .= '</table>'; /*round corner table end */ $myresult .= '</form>'; /*end the form to take ratings */ $myresult .= '</div>'; /*end 2nd tab */ $myresult .= '</div>'; /*end tabs div */ /* actual rating table - end */ /* 1st form ends here id- ratings_form */ } /* end of if loop result_product loop */ /* start table 3 - overall comment*/ $myresult .= '<table border=\'0\' cellspacing=\'0\' cellpadding=\'0\' style=\'width:580px; table-layout:fixed;\' id=\'rounded-corner\'>'; $myresult .= '<tbody>'; /* thead - start */ $myresult .= '<thead>'; $myresult .= '<tr>'; $myresult .= '<th width=\'100%\' colspan=\'2\' class=\'rounded-company\' scope=\'col\'><span style=\'font: normal 18px Arial, Helvetica, sans-serif; color:#FFF;\'>Overall Comments</span></th>'; $myresult .= '<th colspan=\'3\' class=\'rounded-q4\' scope=\'col\'></th>'; $myresult .= '</tr>'; $myresult .= '</thead>'; /* thead - end */ $myresult .= '<tr>'; $myresult .= '<td colspan=\'4\'>'; $myresult .= '<textarea title=\'OverAll Comment\' name=\'overall_comment\' cols=\'65\'></textarea>'; $myresult .= '</td>'; $myresult .= '</tr>'; $myresult .= '<tbody>'; $myresult .= '</table>'; /* end table 3 - overall comment*/ /* start table 4 - summary*/ $myresult .= '<table border=\'0\' cellspacing=\'0\' cellpadding=\'0\' style=\'width:580px; table-layout:fixed;\' id=\'rounded-corner\'>'; $myresult .= '<tbody>'; /* thead - start */ $myresult .= '<thead>'; $myresult .= '<tr>'; $myresult .= '<th colspan=\'2\' class=\'rounded-company\' scope=\'col\'><span style=\'font: normal 18px Arial, Helvetica, sans-serif; color:#FFF;\'>Your Opinion</span></th>'; $myresult .= '<th colspan=\'2\'class=\'rounded-q4\' scope=\'col\'></th>'; $myresult .= '</tr>'; $myresult .= '</thead>'; /* thead - end */ $myresult .= '<tr>'; $myresult .= '<td colspan=\'2\'>'; $myresult .= 'Do you Agree with the Ratings'; $myresult .= '</td>'; $myresult .= '<td colspan=\'2\'>'; $myresult .= 'Was the Information Helpful'; $myresult .= '</td>'; $myresult .= '</tr>'; $myresult .= '<tr>'; $myresult .= '<form name=\'form2\' id=\'form2\' method=\'post\'>'; $myresult .= '<td>'; $myresult .= '<input type=\'button\' class=\'agree\' value=\'agree\'>'; $myresult .= '</td>'; $myresult .= '<td>'; $myresult .= '<input type=\'button\' class=\'disagree\' value=\'disagree\'>'; $myresult .= '</td>'; $myresult .= '<input type=\'hidden\' name=\'agree_disagree\' id=\'agree_disagree\'>'; $myresult .= '</form>'; $myresult .= '<form name=\'form3\' id=\'form3\' method=\'post\'>'; $myresult .= '<td>'; $myresult .= '<input type=\'button\' class=\'helpful\' value=\'Helpful\'>'; $myresult .= '</td>'; $myresult .= '<td>'; $myresult .= '<input type=\'button\' class=\'nothelpful\' value=\'Not Helpful\'>'; $myresult .= '</td>'; $myresult .= '<input type=\'hidden\' name=\'help_nohelp\' id=\'help_nohelp\'>'; $myresult .= '</form>'; $myresult .= '</tr>'; $myresult .= '</tbody>'; $myresult .= '</table>'; /*end table 4 summary table */ $myresult .= '</div>'; /* Actual Form or Page - end */ echo $myresult; //echo 'Product: '.$product; //echo '<br/>Alias: '.$alias; ?> hey this code is working fine for me . as required. the star class code is taken from http://www.fyneworks.com/jquery/star-rating/ ... it works well.. but when i insert code to add tabs for content ,the starts is not visible at all. but when i check source code. the stars are actually there . dono whats the prob. any suggestions on this this is the tabs code $('#tabs div').hide(); ('#tabs div:first').show(); $('#tabs ul li:first').addClass('active'); $('#tabs ul li a').click(function() { $('#tabs ul li').removeClass('active'); $(this).parent().addClass('active'); var currentTab = $(this).attr('href'); $('#tabs div').hide(); $(currentTab).show(); return false; });

Search Results

Search found 9210 results on 369 pages for 'float encoding'.

Page 192/369 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199 | Next Page >

- by DigitalGeekery

- by Geordie

- by The Digital Ninja

- by zenzero

- by James Michael Hare

- by Bill Osuch

- by nikolaosk

- by janoChen

- by cibrax

- by cibrax

- by Mike Curry

- by Michal Bozydar Pawlowski

- by nKn

- by nikolaosk

- by Shaun

- by Your DisplayName here!

- by Jon Dalberg

- by Steve

- by Solom

- by DigiMortal

- by Ghilliedrone

- by Steve

- by pradeep

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199 | Next Page >