Search Results

Search found 27852 results on 1115 pages for 'oracle openworld blog team'.

Page 193/1115 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

  • Oracle Internet Directory - Required Schemas already loaded

    - by Brandon Kreisel
    After a successful installation of Oracle Internet Directories (OID) I attemped to remove and re-install it with a different configuration. First I ran ./runInstaller.sh -deinstall from the OID middleware directory to uninstall. Then i ran the installer again but it complained on the Specify Schema Database step. Upon connecting to the database, the installer threw: INST-5174: Required schemas are already loaded in the specified database. I connected to the target database and removed the OID schemas I knew of SQL> drop user ODS cascade; SQL> drop user ODSSM cascade; That didn't not work and the error still appears. What steps am I missing? Note: The Database is 11g and it was brand new before installing OID so there is no other data select * from all_users doesn't show any other schemas related to OID from what I can tell, the latest user creation date is OCT 2010

    Read the article

  • Oracle LogMiner (Unsupported Operation)

    - by Sarith
    Hi all, I'm currently using Oracle 11g on RHEL5. I'm digging to see what are in the archived log files. After I query from v$logmnr_contents, I see many transactions of UNSUPPORTED operation. What do these unsupported transactions mean? I think that it's the cause that make my database generates lots of archived logs. Moreover, I'm using global temporary table for generating reports. I discover that when I insert and delete from those temporary table, it also records in the archived log file. How to do to reduce those recorded transactions? Regards, Sarith

    Read the article

  • Oracle parameter array binding from c# executed parallel and serial on different servers

    - by redir_dev_nut
    I have two Oracle 9i 64 bit servers, dev and prod. Calling a procedure from a c# app with parameter array binding, prod executes the procedure simultaneously for each value in the parameter array, but dev executes for each value serially. So, if the sproc does: select count(*) into cnt from mytable where id = 123; if cnt = 0 then insert into mytable (id) values (123); end if; Assuming the table initially does not have an id = 123 row. Dev gets cnt = 0 for the first array parameter value, then 1 for each of the subsequent. Prod gets cnt = 0 for all array parameter values and inserts id 123 for each. Is this a configuration difference, an illusion due to speed difference, something else?

    Read the article

  • Oracle EE 11.2g: how to generate fresh new redo logs

    - by Aikanaro
    Hi, In the company I work for we are heavy users of vmware machines. Almost all our projects are developed inside a virtual environment up to the point where we have to deploy them into a production system. While in development, some colleagues of mine deleted the redo log files for Oracle in the hopes of gaining some free space. Now they are unable to start the database instance. Is there a way of generating a fresh new redo log so that the instance can be started? This is urgent and even though I'm currently googling for an answer I have yet to find it. Thanks in advance.

    Read the article

  • Oracle Enterprise Manager Logs

    - by idea_
    Hi, I'm attempting to investigate the root cause of the following error which occurs each time a users call an Oracle 10g Forms applet: FRM-92102: A network error has occurred. The Forms Client has attempted to reestablish its connection to the Server 1 time(s) without success. Please check the network connection and try again later. Details... Java Exception: java.io.IOException: Connection failure with 503 This error remained after restarting all my system components: HTTP_Server, OC4J_BI_Forms, Web Cache, Reports Server, etc. The only way to clear this issue was to restart the server entirely. During the downtime, web pages were rendered with the PL/SQL cartridge and being served, so it appears as though this was isolated to forms. Does anybody know which log files may provide clues here? Any help would be much appreciated :) Update: If somebody can provide me with a way or reference to increase the capacity of my web server to minimize these errors, I will accept this as the solution.

    Read the article

  • Oracle tuning optimizer index cost adj and optimizer index caching

    - by Darryl Braaten
    What is the correct way to set the optimizer index cost adj parameter for Oracle. As a developer I have observed huge performance improvements as this parameter is lowered. Common queries are reduced from 2 seconds to 200ms. There are lots of warnings on the net that lowering this value will cause dire issues with the database, but no detail is given on what will start going wrong. I am currently only seeing only an upside, much improved application performance and no downside. I need to better understand the possible negative repercussions of adjusting these parameters.

    Read the article

  • Fixed expired accounts in Oracle 11g

    - by Álvaro G. Vicario
    I have an Oracle 11g server that's used for PHP development. Recently, I had a problem logging into the Enterprise Manager due to expired passwords. I've already changed settings so passwords no longer expire and I've unlocked all users. However, the user manager shows most built-in users as expired. How can I fix that? (If I just set a password for each expired account I guess that whatever services are using it will no longer be able to log in.)

    Read the article

  • Apache Rewrite problems with my blog

    - by roacha
    Hey Guys, I am having a hard time getting the rewrite rule setup correctly for my website&blog. Here is the current line in Apache's virtual host: RewriteRule ^/(?:blog|apc|_em|phpsecinfo|blog/)/ - [L] I am able to access my URL at www.domainname.com/blog/ But I am unable to access it at www.domainname.com/blog (without the ending /) How can I edit my Rewrite rule so that I can reach the blog without the ending / ? Thanks

    Read the article

  • Oracle 10g cannot see any data in tables

    - by MMRUSer
    Im getting this error in Oracle 10g log file 2010-11-12 16:07:41.838: [ OCROSD][3069777600]utgdv:2:ocr loc file cannot be opened 2010-11-12 16:07:41.865: [ OCROSD][3069777600]utopen:1: Couldnt find ocr,[ocrmirror] location in config file 2010-11-12 16:07:41.865: [ OCRRAW][3069777600]proprinit: Could not open raw device 2010-11-12 16:07:41.865: [ default][3069777600]a_init:7!: Backend init unsuccessful : [33] 2010-11-12 16:07:41.865: [ CSSCLNT][3069777600]clsssinit: error(33 ) in OCR initialization I was able to connect but can't generate table data form my client program. Plus it was working earlier. Im running on Redhat EL 5 Thanks.

    Read the article

  • Oracle Logical Standby redo generation

    - by DCookie
    Oracle 10.2.0.4 database with a logical standby on Win2K3. Recently a rather large delete operation was carried out on the production instance. I'm experiencing difficulty with the logical standby, in that it gets a couple of hundred (58M size) archive logs into the operation and the apply process fails with an out-of-memory error. Unfortunately, every time it fails it has to restart the apply from the beginning of the transaction. This is taking a couple of days each time. Anyway, in trying to resolve this problem, I've noticed that each archive log from the production system generates 5 or 6 log switches on the standby. I don't understand why this should be. Anyone have any ideas? A related question that I've not found the answer for: does anyone know if the logical standby must be running in archivelog mode? I really don't have a need to keep the logs.

    Read the article

  • What are the primary advantages of Visual Studio Team Foundation Server over the other versions?

    - by Andrew Dunaway
    We are looking into the possibility of upgrading to Team Foundation Server 2008 for our development team. One of our primary reasons is some of the deployment capabilities surrounding BizTalk 2009, but I am curious what other benefits there are for other projects outside of BizTalk. Some of our interests so far are moving to a one click build and deploy process, the addition of unit tests, and continuous integration. Some definite steps forward for the company I work for. What other benefits or information should I look at as I pitch this to upper management? I am looking for technical reasons, money is a not really a concern for this discussion.

    Read the article

  • Oracle application - files missing in the Mount point in UNix server

    - by arun_V
    My oracle application test instance is down, When I browse through the Unix server, I couldn’t find any files in the mount point,U01 U06 or U10, when I put BDF command it shows the following $ bdf Filesystem kbytes used avail %used Mounted on /dev/vg00/lvol3 204800 35571 158662 18% / /dev/vg00/lvol1 299157 38506 230735 14% /stand /dev/vg00/lvol8 1392640 1261068 123620 91% /var /dev/vg00/lvol7 1327104 825170 470631 64% /usr /dev/vg00/lvol4 716800 385891 310746 55% /tmp /dev/vg00/lvol6 872448 814943 53936 94% /opt /dev/vg00/lvolssh 32768 13243 18306 42% /opt/openssh /dev/vg00/lvol5 204800 187397 16334 92% /home /dev/vg00/lvolback 512000 472879 36704 93% /backup dg-ora04:/dgora03_u10 204800 167088 35416 83% /u10 dg-ora04:/dgora03_u06 204800 167088 35416 83% /u06 dg-ora04:/dgora03_u01 204800 167088 35416 83% /u01 Why can't I see any files inside the mount points?

    Read the article

  • oracle virtualbox doesn't work for host Kubuntu since Lucid Lynx 10.04

    - by 13east
    I have a thinkpad edge 14 core i3 2.4 ghz and 4g ram; I have tried kubuntu 10.04, 10.10, 11.10, 12.04 and 12.10 (all x64 architecture); Both oracle and ose virtualbox only works properly to install XP and windows 7 quest system on kubuntu 10.04; For every other kubuntu release since, the guest installation goes as far as formatting the virtual drive, freezes at this step, and doesn't even go as far as copying files to hard-drive to begin installation. But virtualbox has not stopped responding to commands; I can kill that one specific window with the problem installation ("machine" - "close" - "power off the machine") and start over again without having to force-kill virtualbox application. If anyone knows how I can go about addressing this problem, any help you can provide would be very much appreciated. Thank You.

    Read the article

  • Force shutdown a pc stuck in updating via Team Viewer

    - by Martheen Cahya Paulo
    Before I left office, I shutdown my work computer, leaving it in "Please do not power off..." screen. Now, when I log on to my own computer, I saw in Team Viewer that it's on. I thought it restarted instead of shutting down, but when I connect to it, it's still stuck in the previous screen. I've tried sending Ctrl-Alt-Del, but it seems to ignore it. I could still change its resolution via Team Viewer, and the fact that it respond my connection means it's not completely stalled. Is there anyway to shutdown it via Team Viewer?

    Read the article

  • Oracle redo log performance degradation when inserting

    - by Aldarund
    I have a oracle 11g database. I'm testing in for inserts. The database running in noarchive mode. I have 3 redo log configured, each 2gb. I'm trying to insert data into test table. At begin it goes fine with 15k ins/second. I make a commit after 200 inserts. But after about 1.3m inserted records it become really slow, about 1-2k ins/second. As i noticed in resource explorer at this point we have filled all redo logs and so the inserts from this points work slow. So my question is why it become so slow when it fills redo logs, even if i commit each 200 records. And how this situation can be fixed ( except the turning off logging completely at inserts)

    Read the article

  • Experience with Intel X25-M 160GB and Oracle

    - by derobert
    We're considering building an Oracle database with 12 Intel X25-M G2 160GB drives in software RAID10. It'd be running Linux. Database gets some very heavy write activity during the early morning data load, other than that it is mostly read-only (and the read load is fairly minimal). We're currently running on 11 150GB Velociraptors (also Linux software RAID10), and are hoping the X25-M will speed up the data load. We currently have redo on different disks than the rest of the data. I'm wondering a few things: Any experience with using X25-M drives for databases? The X25-E are unfortunately beyond our budget. Would it hurt to separate redo off to some magnetic (non-SSD) drives, say 2 (raid1) or 4 (raid10) Seagate Constellations?

    Read the article

  • Oracle backup and recovery

    - by kupa
    During recovery Oracle writes the following error: RMAN-06054: media recovery requesting unknown log: thread 1 seq 9 lowscn 4034762 I have used in mount mode this command: change archivelog all crosscheck; delete expired archivelog all; Then restore and tried to recover again:But still RMAN-06054 error.Than I wrote: run{ SET UNTIL SEQUENCE 9 THREAD 1; RESTORE DATABASE; RECOVER DATABASE; } It helped me to recover database...But after that when I do the backup and then recover the same error occurs and solution is the same... I wonder to solve this problem without SET UNTIL SEQUENCE 9 THREAD 1; maybe I should unregister this archive log from control file(I am using control file not catalog) Can you tell me how?

    Read the article

  • again again again…. it is Oracle Open World 2012

    - by JuergenKress
    Again… again I crashed my knee during kite surfing. Again the right knee, again the outside meniscus, again the same doctor, again the same operation, again they could sew my meniscus, again the same physiotherapy… again I will miss OOW. OOW session you should not miss Oracle PartnerNetwork Exchange Middleware stream Focus on SOA and BPM Focus on BPM For OFM Partner Advisory Councils please contact [email protected] Keynotes and General sessions to attend: Thomas Kurian: Tuesday, October 2 8:45 a.m. 9:45 a.m., Moscone North, Hall D Hasan Rizvi: General session middleware: Tuesday, October 3 10:15 am 11:15 am, Moscone North, Hall D If you can’t make it to San Francisco watch the keynotes live on-demand Tips and tricks for OOW Plan your visit well in advance! Which keynotes & session do you want to attend? Demo Grounds are highly recommended and the best of OOW! Which 1:1 meetings do you want to arrange? Attend a Partner or Customer Advisory Council? Attend a Country or Community Reception? Attire during OOW: casual clothing, comfortable shoes and light luggage! Do not forget to drink water. Sign an international travel and health insurance before you leave home! What we want from you! Send your tweets: twitter.com/soacommunity @soacommunity and share your pictures at http://www.facebook.com/soacommunity SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: OOW,Oracle Open World,SOA Community,Oracle SOA,Oracle BPM,BPM,Community,OPN,Jürgen Kress

    Read the article

  • again again again…. it is Oracle Open World 2012

    - by JuergenKress
    Again… again I crashed my knee during kite surfing. Again the right knee, again the outside meniscus, again the same doctor, again the same operation, again they could sew my meniscus, again the same physiotherapy… again I will miss OOW. OOW session you should not miss Oracle PartnerNetwork Exchange Middleware stream CAF Overall (WebLogic Server, Tuxedo, Coherence, Java Cloud Service, GlassFish) Oracle WebLogic Server Oracle Coherence Java Cloud Service GlassFish Traffic Director Tuxedo For OFM Partner Advisory Councils please contact [email protected] Keynotes and General sessions to attend: Thomas Kurian: Tuesday, October 2 8:45 a.m. 9:45 a.m., Moscone North, Hall D Hasan Rizvi: General session middleware: Tuesday, October 3 10:15 am 11:15 am, Moscone North, Hall D If you can’t make it to San Francisco watch the keynotes live on-demand Tips and tricks for OOW Plan your visit well in advance! Which keynotes & session do you want to attend? Demo Grounds are highly recommended and the best of OOW! Which 1:1 meetings do you want to arrange? Attend a Partner or Customer Advisory Council? Attend a Country or Community Reception? Attire during OOW: casual clothing, comfortable shoes and light luggage! Do not forget to drink water. Sign an international travel and health insurance before you leave home! What we want from you! Send your tweets: http://twitter.com/wlscommunity and @wlscommnity share your pictures at http://www.facebook.com/WebLogicCommunity WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Oracle Open World,OOW,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Floating Panels and Describe Windows in Oracle SQL Developer

    - by thatjeffsmith
    One of the challenges I face as I try to share tips about our software is that I tend to assume there are features that you just ‘know about.’ Either they’re so intuitive that you MUST know about them, or it’s a feature that I’ve been using for so long I forget that others may have never even seen it before. I want to cover two of those today - Describe (DESC) – SHIFT+F4 Floating Panels My super-exciting desktop SQL Developer and Describe DESC or Describe is an Oracle SQL*Plus command. It shows what a table or view is composed of in terms of it’s column definition. Here’s an example: SQL*Plus: Release 11.2.0.3.0 Production on Fri Sep 21 14:25:37 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> desc beer; Name Null? Type ----------------------------------------- -------- ---------------------------- BREWERY NOT NULL VARCHAR2(100) CITY VARCHAR2(100) STATE VARCHAR2(100) COUNTRY VARCHAR2(100) ID NUMBER SQL> You can get the same information – and a good bit more – in SQL Developer using the SQL Developer DESC command. You invoke it with SHIFT+F4. It will open a floating (non-modal!) window with the information you want. Here’s an example: I can see my column definitions, constratins, stats, privs, etc A few ‘cool’ things you should be aware of: I can open as many as I want, and still work in my worksheet, browser, etc. I can also DESC an index, user, or most any other database object I can of course move them off my primary desktop display The DESC panel’s are read-only. I can’t drop a constraint from within the DESC window of a given table. But for dragging columns into my worksheet, and checking out the stats for my objects as I query them – it’s very, very handy. Try This Right Now Type ‘scott.emp’ (or some other table you have), place your cursor on the text, and hit SHIFT+F4. You’ll see the EMP object open. Now click into a column name in the columns page. Drag it into your worksheet. It will paste that column name into your query. This is an alternative for those that don’t like our code insight feature or dragging columns off the connection tree (new for v3.2!) Got it? SQL Developer’s Floating Panels Ok, let’s talk about a similar feature. Did you know that any dockable panel from the View menu can also be ‘floated?’ One of my favorite features is the SQL History. Every query I run is recorded, and I can recall them later without having to remember what I ran and when. And I USUALLY use the keyboard shortcuts for this. Let your trouble float away…if only it were so easy as a right-click in the real world. But sometimes I still want to see my recall list without having to give up my screen real estate. So I just mouse-right click on the panel tab and select ‘Float.’ Then I move it over to my secondary display – see the poorly lit picture in the beginning of this post. And that’s it. Simple, I know. But I thought you should know about these two things!

    Read the article

  • Have you registered? Oracle 'In Touch' PartnerCast: Be prepared for a year of growth

    - by Julien Haye
    Hi there Oracle Partners, We hope you’ve seen our recent blog post regarding the next Oracle ‘In Touch’ PartnerCast? Hosted by David Callaghan, Senior Vice President EMEA Alliances and Channels, to be broadcast on Tuesday 1st July 2014 from 10:30am UK/11:30am CET. David and his studio guests will be discussing the latest news from Oracle; including highlights of FY14, Strategic themes for FY15 and SaaS. We will also have an exclusive for ‘In Touch’ whereby David interviews Senior Vice President, Global Alliances & Channels, Rich Geraffo, on what the FY15 Oracle Global Partner Kick Off means for EMEA Oracle Partners. Also, David provides your chance to hear from some of the newly appointed Oracle Worldwide A&C Leadership Team. Got a question for David and his guests? Get in touch on Twitter using the hashtag #OracleInTouch or by emailing [email protected] to get your questions featured in the cast! To find out more information and to watch previous episodes on-demand, please visit our webpage here. We hope you can make it! Oracle EMEA Alliances & Channels

    Read the article

  • Daily Blog Archives and Duplicate Content

    - by nemmy
    A few weeks back I realised that my blog software was creating daily post archives. Which basically resulted in duplicate content especially if I only had one post a day. The situation is something like this: www.sitename.com/blog/archives/2013/06/01 - daily archive for 1 June 2013 www.sitename.com/blog/archives/2013/06/my-post-name.html So, here we have two pages that are basically identical except the daily archive has some meaningless title like "Daily Archive for 1 June 2003". And I have no control over which content Google decides is the primary content. It's quite possible (and likely) that the daily archive could be the "primary" content and the actual post itself the "duplicate". Once I realised it was doing this I modified the daily archive template to include <meta name="robots" content="noindex"> Here we are a few weeks later and I still see some daily archives coming up in Google search results. I realise some of those deep pages might not be crawled yet but I am worried that the original post (which should be the PRIMARY content) has been marked duplicate content by Google. Now I've no indexed the daily archives I might end up with no indexed content AND the original articles still flagged as duplicates. And nothing will show up in search at all. Have I screwed myself here or is there a way out?

    Read the article

  • Venez nous voir au Forum Oracle Big Data le 5 avril !

    - by Kinoa
    Le Big Data vient de plus en plus souvent au devant de la scène et vous souhaitez en apprendre davantage ? Générés à partir des réseaux sociaux, de capteurs numériques et autres équipements mobiles, les Big Data - autrement dits, d'énormes volumes de données - constituent une mine d'informations précieuses sur vos activités et les comportements de vos clients. Votre challenge aujourd’hui consiste à gérer l’acquisition, l’organisation et la compréhension de ces volumes de données non structurées, et à les intégrer dans votre système d’information. Vous avez des questions ? Ca vous parait complexe ? Alors le Forum Oracle Bid Data organisé par Oracle et Intel est fait pour vous !   Nous aborderons plusieurs points : Accélération du déploiement de Big Data par l'approche intégrée du hardware et du software Mise à disposition de tous les outils nécessaires au processus complet, de l'acquisition des données à la restitution Intégration de Big Data dans votre système d'information pour fournir aux utilisateurs la quintessence de l'information Nous vous avons concocté un programme des plus alléchant pour cette journée du 5 avril : 9h00 Accueil et remise des badges 9h30 Big Data : The Industry View. Are you ready ?Johan Hendrickx, Core Technology Director, Oracle EMEA Keynote : Big Data – Are you ready ? George Lumpkin, Vice President of DW Product Management, Oracle Corporation Acquisition des données dans votre Big Dataavec Hadoop et Oracle NoSQL Pause Organisez et structurez l'information au sein de votre Big Data avec Big Data Connectors et Oracle Data Integrator Tirez parti des analyses des données de votre Big Dataavec Oracle Endeca et Oracle Business Intelligence 13h00 Cocktail déjeunatoire Le nombre de places est limité, pensez à vous inscrire dès maintenant. Lieu :  Maison de la Chimie28 B, rue Saint Dominique 75007 Paris

    Read the article

  • Good design for a simple site that contains a blog

    - by bporter
    What is a good design for a simple web site with mostly static pages and a blog? I am helping a friend build this for their small business. We are looking for a simple approach that can be implemented fairly quickly. (I am a programmer and can help with coding, hosting, etc.) One option is to use a site like virb, which lets you choose from one of their themes and build a site pretty easily. You can also include a blog. They host the site for a pretty low monthly rate. I recommended this option, but my friend wants a design that is unique and custom. So, I took one of the themes and started modifying the HTML and CSS. This might still be a good option, but... ...If we are going to greatly modify it, why not just create the static pages from scratch and use something like Wordpress for the blog. Is this a good option? It looks fairly easy to integrate Wordpress with a site so that the design and behavior are really cohesive. Is this a good idea? Do you recommend any other approaches?

    Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >