Search Results

Search found 5205 results on 209 pages for 'extra'.

Page 197/209 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• How to Upgrade Your Netbook to Windows 7 Home Premium

  - by Matthew Guay

  Would you like more features and flash in Windows on your netbook?  Here’s how you can easily upgrade your netbook to Windows 7 Home Premium the easy way. Most new netbooks today ship with Windows 7 Starter, which is the cheapest edition of Windows 7.  It is fine for many computing tasks, and will run all your favorite programs great, but it lacks many customization, multimedia, and business features found in higher editions.  Here we’ll show you how you can quickly upgrade your netbook to more full-featured edition of Windows 7 using Windows Anytime Upgrade.  Also, if you want to upgrade your laptop or desktop to another edition of Windows 7, say Professional, you can follow these same steps to upgrade it, too. Please note: This is only for computers already running Windows 7.  If your netbook is running XP or Vista, you will have to run a traditional upgrade to install Windows 7. Upgrade Advisor First, let’s make sure your netbook can support the extra features, such as Aero Glass, in Windows 7 Home Premium.  Most modern netbooks that ship with Windows 7 Starter can run the advanced features in Windows 7 Home Premium, but let’s check just in case.  Download the Windows 7 Upgrade Advisor (link below), and install as normal. Once it’s installed, run it and click Start Check.   Make sure you’re connected to the internet before you run the check, or otherwise you may see this error message.  If you see it, click Ok and then connect to the internet and start the check again. It will now scan all of your programs and hardware to make sure they’re compatible with Windows 7.  Since you’re already running Windows 7 Starter, it will also tell you if your computer will support the features in other editions of Windows 7. After a few moments, the Upgrade Advisor will show you want it found.  Here we see that our netbook, a Samsung N150, can be upgraded to Windows 7 Home Premium, Professional, or Ultimate. We also see that we had one issue, but this was because a driver we had installed was not recognized.  Click “See all system requirements” to see what your netbook can do with the new edition. This shows you which of the requirements, including support for Windows Aero, your netbook meets.  Here our netbook supports Aero, so we’re ready to go upgrade. For more, check out our article on how to make sure your computer can run Windows 7 with Upgrade Advisor. Upgrade with Anytime Upgrade Now, we’re ready to upgrade our netbook to Windows 7 Home Premium.  Enter “Anytime Upgrade” in the Start menu search,and select Windows Anytime Upgrade. Windows Anytime Upgrade lets you upgrade using product key you already have or one you purchase during the upgrade process.  And, it installs without any downloads or Windows disks, so it works great even for netbooks without DVD drives. Anytime Upgrades are cheaper than a standard upgrade, and for a limited time, select retailers in the US are offering Anytime Upgrades to Windows 7 Home Premium for only $49.99 if purchased with a new netbook.  If you already have a netbook running Windows 7 Starter, you can either purchase an Anytime Upgrade package at a retail store or purchase a key online during the upgrade process for $79.95.  Or, if you have a standard Windows 7 product key (full or upgrade), you can use it in Anytime upgrade.  This is especially nice if you can purchase Windows 7 cheaper through your school, university, or office. Purchase an upgrade online To purchase an upgrade online, click “Go online to choose the edition of Windows 7 that’s best for you”.   Here you can see a comparison of the features of each edition of Windows 7.  Note that you can upgrade to either Home Premium, Professional, or Ultimate.  We chose home Premium because it has most of the features that home users want, including Media Center and Aero Glass effects.  Also note that the price of each upgrade is cheaper than the respective upgrade from Windows XP or Vista.  Click buy under the edition you want.   Enter your billing information, then your payment information.  Once you confirm your purchase, you will directly be taken to the Upgrade screen.  Make sure to save your receipt, as you will need the product key if you ever need to reinstall Windows on your computer. Upgrade with an existing product key If you purchased an Anytime Upgrade kit from a retailer, or already have a Full or Upgrade key for another edition of Windows 7, choose “Enter an upgrade key”. Enter your product key, and click Next.  If you purchased an Anytime Upgrade kit, the product key will be located on the inside of the case on a yellow sticker. The key will be verified as a valid key, and Anytime Upgrade will automatically choose the correct edition of Windows 7 based on your product key.  Click Next when this is finished. Continuing the Upgrade process Whether you entered a key or purchased a key online, the process is the same from here on.  Click “I accept” to accept the license agreement. Now, you’re ready to install your upgrade.  Make sure to save all open files and close any programs, and then click Upgrade. The upgrade only takes about 10 minutes in our experience but your mileage may vary.  Any available Microsoft updates, including ones for Office, Security Essentials, and other products, will be installed before the upgrade takes place. After a couple minutes, your computer will automatically reboot and finish the installation.  It will then reboot once more, and your computer will be ready to use!  Welcome to your new edition of Windows 7! Here’s a before and after shot of our desktop.  When you do an Anytime Upgrade, all of your programs, files, and settings will be just as they were before you upgraded.  The only change we noticed was that our pinned taskbar icons were slightly rearranged to the default order of Internet Explorer, Explorer, and Media Player.  Here’s a shot of our desktop before the upgrade.  Notice that all of our pinned programs and desktop icons are still there, as well as our taskbar customization (we are using small icons on the taskbar instead of the default large icons). Before, with the Windows 7 Starter background and the Aero Basic theme: And after, with Aero Glass and the more colorful default Windows 7 background.   All of the features of Windows 7 Home Premium are now ready to use.  The Aero theme was activate by default, but you can now customize your netbook theme, background, and more with the Personalization pane.  To open it, right-click on your desktop and select Personalize. You can also now use Windows Media Center, and can play-back DVD movies using an external drive. One of our favorite tools, the Snipping Tool, is also now available for easy screenshots and clips. Activating you new edition of Windows 7 You will still need to activate your new edition of Windows 7.  To do this right away, open the start menu, right-click on Computer, and select Properties.   Scroll to the bottom, and click “Activate Windows Now”. Make sure you’re connected to the internet, and then select “Activate Windows online now”. Activation may take a few minutes, depending on your internet connection speed. When it is done, the Activation wizard will let you know that Windows is activated and genuine.  Your upgrade is all finished! Conclusion Windows Anytime Upgrade makes it easy, and somewhat cheaper, to upgrade to another edition of Windows 7.  It’s useful for desktop and laptop owners who want to upgrade to Professional or Ultimate, but many more netbook owners will want to upgrade from Starter to Home Premium or another edition.  Links Download the Windows 7 Upgrade Advisor Windows Team Blog: Anytime Upgrade Special with new PC purchase Similar Articles Productive Geek Tips How To Upgrade from Vista to Windows 7 Home Premium EditionAnother Blog You Should Subscribe ToMysticgeek Blog: Turn Vista Home Premium Into Ultimate (Part 3) – Shadow CopyUpgrade Ubuntu from Breezy to DapperHow to Upgrade the Windows 7 RC to RTM (Final Release) TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday

  Read the article

• Using LINQ Distinct: With an Example on ASP.NET MVC SelectListItem

  - by Joe Mayo

  One of the things that might be surprising in the LINQ Distinct standard query operator is that it doesn’t automatically work properly on custom classes. There are reasons for this, which I’ll explain shortly. The example I’ll use in this post focuses on pulling a unique list of names to load into a drop-down list. I’ll explain the sample application, show you typical first shot at Distinct, explain why it won’t work as you expect, and then demonstrate a solution to make Distinct work with any custom class. The technologies I’m using are  LINQ to Twitter, LINQ to Objects, Telerik Extensions for ASP.NET MVC, ASP.NET MVC 2, and Visual Studio 2010. The function of the example program is to show a list of people that I follow.  In Twitter API vernacular, these people are called “Friends”; though I’ve never met most of them in real life. This is part of the ubiquitous language of social networking, and Twitter in particular, so you’ll see my objects named accordingly. Where Distinct comes into play is because I want to have a drop-down list with the names of the friends appearing in the list. Some friends are quite verbose, which means I can’t just extract names from each tweet and populate the drop-down; otherwise, I would end up with many duplicate names. Therefore, Distinct is the appropriate operator to eliminate the extra entries from my friends who tend to be enthusiastic tweeters. The sample doesn’t do anything with the drop-down list and I leave that up to imagination for what it’s practical purpose could be; perhaps a filter for the list if I only want to see a certain person’s tweets or maybe a quick list that I plan to combine with a TextBox and Button to reply to a friend. When the program runs, you’ll need to authenticate with Twitter, because I’m using OAuth (DotNetOpenAuth), for authentication, and then you’ll see the drop-down list of names above the grid with the most recent tweets from friends. Here’s what the application looks like when it runs: As you can see, there is a drop-down list above the grid. The drop-down list is where most of the focus of this article will be. There is some description of the code before we talk about the Distinct operator, but we’ll get there soon. This is an ASP.NET MVC2 application, written with VS 2010. Here’s the View that produces this screen: <%@ Page Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<TwitterFriendsViewModel>" %> <%@ Import Namespace="DistinctSelectList.Models" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server">     Home Page </asp:Content><asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server">     <fieldset>         <legend>Twitter Friends</legend>         <div>             <%= Html.DropDownListFor(                     twendVM => twendVM.FriendNames,                     Model.FriendNames,                     "<All Friends>") %>         </div>         <div>             <% Html.Telerik().Grid<TweetViewModel>(Model.Tweets)                    .Name("TwitterFriendsGrid")                    .Columns(cols =>                     {                         cols.Template(col =>                             { %>                                 <img src="<%= col.ImageUrl %>"                                      alt="<%= col.ScreenName %>" />                         <% });                         cols.Bound(col => col.ScreenName);                         cols.Bound(col => col.Tweet);                     })                    .Render(); %>         </div>     </fieldset> </asp:Content> As shown above, the Grid is from Telerik’s Extensions for ASP.NET MVC. The first column is a template that renders the user’s Avatar from a URL provided by the Twitter query. Both the Grid and DropDownListFor display properties that are collections from a TwitterFriendsViewModel class, shown below: using System.Collections.Generic; using System.Web.Mvc; namespace DistinctSelectList.Models { /// /// For finding friend info on screen /// public class TwitterFriendsViewModel { /// /// Display names of friends in drop-down list /// public List FriendNames { get; set; } /// /// Display tweets in grid /// public List Tweets { get; set; } } } I created the TwitterFreindsViewModel. The two Lists are what the View consumes to populate the DropDownListFor and Grid. Notice that FriendNames is a List of SelectListItem, which is an MVC class. Another custom class I created is the TweetViewModel (the type of the Tweets List), shown below: namespace DistinctSelectList.Models { /// /// Info on friend tweets /// public class TweetViewModel { /// /// User's avatar /// public string ImageUrl { get; set; } /// /// User's Twitter name /// public string ScreenName { get; set; } /// /// Text containing user's tweet /// public string Tweet { get; set; } } } The initial Twitter query returns much more information than we need for our purposes and this a special class for displaying info in the View.  Now you know about the View and how it’s constructed. Let’s look at the controller next. The controller for this demo performs authentication, data retrieval, data manipulation, and view selection. I’ll skip the description of the authentication because it’s a normal part of using OAuth with LINQ to Twitter. Instead, we’ll drill down and focus on the Distinct operator. However, I’ll show you the entire controller, below,  so that you can see how it all fits together: using System.Linq; using System.Web.Mvc; using DistinctSelectList.Models; using LinqToTwitter; namespace DistinctSelectList.Controllers { [HandleError] public class HomeController : Controller { private MvcOAuthAuthorization auth; private TwitterContext twitterCtx; /// /// Display a list of friends current tweets /// /// public ActionResult Index() { auth = new MvcOAuthAuthorization(InMemoryTokenManager.Instance, InMemoryTokenManager.AccessToken); string accessToken = auth.CompleteAuthorize(); if (accessToken != null) { InMemoryTokenManager.AccessToken = accessToken; } if (auth.CachedCredentialsAvailable) { auth.SignOn(); } else { return auth.BeginAuthorize(); } twitterCtx = new TwitterContext(auth); var friendTweets = (from tweet in twitterCtx.Status where tweet.Type == StatusType.Friends select new TweetViewModel { ImageUrl = tweet.User.ProfileImageUrl, ScreenName = tweet.User.Identifier.ScreenName, Tweet = tweet.Text }) .ToList(); var friendNames = (from tweet in friendTweets select new SelectListItem { Text = tweet.ScreenName, Value = tweet.ScreenName }) .Distinct() .ToList(); var twendsVM = new TwitterFriendsViewModel { Tweets = friendTweets, FriendNames = friendNames }; return View(twendsVM); } public ActionResult About() { return View(); } } } The important part of the listing above are the LINQ to Twitter queries for friendTweets and friendNames. Both of these results are used in the subsequent population of the twendsVM instance that is passed to the view. Let’s dissect these two statements for clarification and focus on what is happening with Distinct. The query for friendTweets gets a list of the 20 most recent tweets (as specified by the Twitter API for friend queries) and performs a projection into the custom TweetViewModel class, repeated below for your convenience: var friendTweets = (from tweet in twitterCtx.Status where tweet.Type == StatusType.Friends select new TweetViewModel { ImageUrl = tweet.User.ProfileImageUrl, ScreenName = tweet.User.Identifier.ScreenName, Tweet = tweet.Text }) .ToList(); The LINQ to Twitter query above simplifies what we need to work with in the View and the reduces the amount of information we have to look at in subsequent queries. Given the friendTweets above, the next query performs another projection into an MVC SelectListItem, which is required for binding to the DropDownList.  This brings us to the focus of this blog post, writing a correct query that uses the Distinct operator. The query below uses LINQ to Objects, querying the friendTweets collection to get friendNames: var friendNames = (from tweet in friendTweets select new SelectListItem { Text = tweet.ScreenName, Value = tweet.ScreenName }) .Distinct() .ToList(); The above implementation of Distinct seems normal, but it is deceptively incorrect. After running the query above, by executing the application, you’ll notice that the drop-down list contains many duplicates.  This will send you back to the code scratching your head, but there’s a reason why this happens. To understand the problem, we must examine how Distinct works in LINQ to Objects. Distinct has two overloads: one without parameters, as shown above, and another that takes a parameter of type IEqualityComparer<T>.  In the case above, no parameters, Distinct will call EqualityComparer<T>.Default behind the scenes to make comparisons as it iterates through the list. You don’t have problems with the built-in types, such as string, int, DateTime, etc, because they all implement IEquatable<T>. However, many .NET Framework classes, such as SelectListItem, don’t implement IEquatable<T>. So, what happens is that EqualityComparer<T>.Default results in a call to Object.Equals, which performs reference equality on reference type objects.  You don’t have this problem with value types because the default implementation of Object.Equals is bitwise equality. However, most of your projections that use Distinct are on classes, just like the SelectListItem used in this demo application. So, the reason why Distinct didn’t produce the results we wanted was because we used a type that doesn’t define its own equality and Distinct used the default reference equality. This resulted in all objects being included in the results because they are all separate instances in memory with unique references. As you might have guessed, the solution to the problem is to use the second overload of Distinct that accepts an IEqualityComparer<T> instance. If you were projecting into your own custom type, you could make that type implement IEqualityComparer<T>, but SelectListItem belongs to the .NET Framework Class Library.  Therefore, the solution is to create a custom type to implement IEqualityComparer<T>, as in the SelectListItemComparer class, shown below: using System.Collections.Generic; using System.Web.Mvc; namespace DistinctSelectList.Models { public class SelectListItemComparer : EqualityComparer { public override bool Equals(SelectListItem x, SelectListItem y) { return x.Value.Equals(y.Value); } public override int GetHashCode(SelectListItem obj) { return obj.Value.GetHashCode(); } } } The SelectListItemComparer class above doesn’t implement IEqualityComparer<SelectListItem>, but rather derives from EqualityComparer<SelectListItem>. Microsoft recommends this approach for consistency with the behavior of generic collection classes. However, if your custom type already derives from a base class, go ahead and implement IEqualityComparer<T>, which will still work. EqualityComparer is an abstract class, that implements IEqualityComparer<T> with Equals and GetHashCode abstract methods. For the purposes of this application, the SelectListItem.Value property is sufficient to determine if two items are equal.   Since SelectListItem.Value is type string, the code delegates equality to the string class. The code also delegates the GetHashCode operation to the string class.You might have other criteria in your own object and would need to define what it means for your object to be equal. Now that we have an IEqualityComparer<SelectListItem>, let’s fix the problem. The code below modifies the query where we want distinct values: var friendNames = (from tweet in friendTweets select new SelectListItem { Text = tweet.ScreenName, Value = tweet.ScreenName }) .Distinct(new SelectListItemComparer()) .ToList(); Notice how the code above passes a new instance of SelectListItemComparer as the parameter to the Distinct operator. Now, when you run the application, the drop-down list will behave as you expect, showing only a unique set of names. In addition to Distinct, other LINQ Standard Query Operators have overloads that accept IEqualityComparer<T>’s, You can use the same techniques as shown here, with SelectListItemComparer, with those other operators as well. Now you know how to resolve problems with getting Distinct to work properly and also have a way to fix problems with other operators that require equality comparisons. @JoeMayo

  Read the article

• Creating a dynamic proxy generator with c# – Part 4 – Calling the base method

  - by SeanMcAlinden

  Creating a dynamic proxy generator with c# – Part 1 – Creating the Assembly builder, Module builder and caching mechanism Creating a dynamic proxy generator with c# – Part 2 – Interceptor Design Creating a dynamic proxy generator with c# – Part 3 – Creating the constructors   The plan for calling the base methods from the proxy is to create a private method for each overridden proxy method, this will allow the proxy to use a delegate to simply invoke the private method when required. Quite a few helper classes have been created to make this possible so as usual I would suggest download or viewing the code at http://rapidioc.codeplex.com/. In this post I’m just going to cover the main points for when creating methods. Getting the methods to override The first two notable methods are for getting the methods. private static MethodInfo[] GetMethodsToOverride<TBase>() where TBase : class {     return typeof(TBase).GetMethods().Where(x =>         !methodsToIgnore.Contains(x.Name) &&                              (x.Attributes & MethodAttributes.Final) == 0)         .ToArray(); } private static StringCollection GetMethodsToIgnore() {     return new StringCollection()     {         "ToString",         "GetHashCode",         "Equals",         "GetType"     }; } The GetMethodsToIgnore method string collection contains an array of methods that I don’t want to override. In the GetMethodsToOverride method, you’ll notice a binary AND which is basically saying not to include any methods marked final i.e. not virtual. Creating the MethodInfo for calling the base method This method should hopefully be fairly easy to follow, it’s only function is to create a MethodInfo which points to the correct base method, and with the correct parameters. private static MethodInfo CreateCallBaseMethodInfo<TBase>(MethodInfo method) where TBase : class {     Type[] baseMethodParameterTypes = ParameterHelper.GetParameterTypes(method, method.GetParameters());       return typeof(TBase).GetMethod(        method.Name,        BindingFlags.Instance | BindingFlags.Public | BindingFlags.NonPublic,        null,        baseMethodParameterTypes,        null     ); }   /// <summary> /// Get the parameter types. /// </summary> /// <param name="method">The method.</param> /// <param name="parameters">The parameters.</param> public static Type[] GetParameterTypes(MethodInfo method, ParameterInfo[] parameters) {     Type[] parameterTypesList = Type.EmptyTypes;       if (parameters.Length > 0)     {         parameterTypesList = CreateParametersList(parameters);     }     return parameterTypesList; }   Creating the new private methods for calling the base method The following method outline how I’ve created the private methods for calling the base class method. private static MethodBuilder CreateCallBaseMethodBuilder(TypeBuilder typeBuilder, MethodInfo method) {     string callBaseSuffix = "GetBaseMethod";       if (method.IsGenericMethod || method.IsGenericMethodDefinition)     {                         return MethodHelper.SetUpGenericMethod             (                 typeBuilder,                 method,                 method.Name + callBaseSuffix,                 MethodAttributes.Private | MethodAttributes.HideBySig             );     }     else     {         return MethodHelper.SetupNonGenericMethod             (                 typeBuilder,                 method,                 method.Name + callBaseSuffix,                 MethodAttributes.Private | MethodAttributes.HideBySig             );     } } The CreateCallBaseMethodBuilder is the entry point method for creating the call base method. I’ve added a suffix to the base classes method name to keep it unique. Non Generic Methods Creating a non generic method is fairly simple public static MethodBuilder SetupNonGenericMethod(     TypeBuilder typeBuilder,     MethodInfo method,     string methodName,     MethodAttributes methodAttributes) {     ParameterInfo[] parameters = method.GetParameters();       Type[] parameterTypes = ParameterHelper.GetParameterTypes(method, parameters);       Type returnType = method.ReturnType;       MethodBuilder methodBuilder = CreateMethodBuilder         (             typeBuilder,             method,             methodName,             methodAttributes,             parameterTypes,             returnType         );       ParameterHelper.SetUpParameters(parameterTypes, parameters, methodBuilder);       return methodBuilder; }   private static MethodBuilder CreateMethodBuilder (     TypeBuilder typeBuilder,     MethodInfo method,     string methodName,     MethodAttributes methodAttributes,     Type[] parameterTypes,     Type returnType ) { MethodBuilder methodBuilder = typeBuilder.DefineMethod(methodName, methodAttributes, returnType, parameterTypes); return methodBuilder; } As you can see, you simply have to declare a method builder, get the parameter types, and set the method attributes you want.   Generic Methods Creating generic methods takes a little bit more work. /// <summary> /// Sets up generic method. /// </summary> /// <param name="typeBuilder">The type builder.</param> /// <param name="method">The method.</param> /// <param name="methodName">Name of the method.</param> /// <param name="methodAttributes">The method attributes.</param> public static MethodBuilder SetUpGenericMethod     (         TypeBuilder typeBuilder,         MethodInfo method,         string methodName,         MethodAttributes methodAttributes     ) {     ParameterInfo[] parameters = method.GetParameters();       Type[] parameterTypes = ParameterHelper.GetParameterTypes(method, parameters);       MethodBuilder methodBuilder = typeBuilder.DefineMethod(methodName,         methodAttributes);       Type[] genericArguments = method.GetGenericArguments();       GenericTypeParameterBuilder[] genericTypeParameters =         GetGenericTypeParameters(methodBuilder, genericArguments);       ParameterHelper.SetUpParameterConstraints(parameterTypes, genericTypeParameters);       SetUpReturnType(method, methodBuilder, genericTypeParameters);       if (method.IsGenericMethod)     {         methodBuilder.MakeGenericMethod(genericArguments);     }       ParameterHelper.SetUpParameters(parameterTypes, parameters, methodBuilder);       return methodBuilder; }   private static GenericTypeParameterBuilder[] GetGenericTypeParameters     (         MethodBuilder methodBuilder,         Type[] genericArguments     ) {     return methodBuilder.DefineGenericParameters(GenericsHelper.GetArgumentNames(genericArguments)); }   private static void SetUpReturnType(MethodInfo method, MethodBuilder methodBuilder, GenericTypeParameterBuilder[] genericTypeParameters) {     if (method.IsGenericMethodDefinition)     {         SetUpGenericDefinitionReturnType(method, methodBuilder, genericTypeParameters);     }     else     {         methodBuilder.SetReturnType(method.ReturnType);     } }   private static void SetUpGenericDefinitionReturnType(MethodInfo method, MethodBuilder methodBuilder, GenericTypeParameterBuilder[] genericTypeParameters) {     if (method.ReturnType == null)     {         methodBuilder.SetReturnType(typeof(void));     }     else if (method.ReturnType.IsGenericType)     {         methodBuilder.SetReturnType(genericTypeParameters.Where             (x => x.Name == method.ReturnType.Name).First());     }     else     {         methodBuilder.SetReturnType(method.ReturnType);     }             } Ok, there are a few helper methods missing, basically there is way to much code to put in this post, take a look at the code at http://rapidioc.codeplex.com/ to follow it through completely. Basically though, when dealing with generics there is extra work to do in terms of getting the generic argument types setting up any generic parameter constraints setting up the return type setting up the method as a generic All of the information is easy to get via reflection from the MethodInfo.   Emitting the new private method Emitting the new private method is relatively simple as it’s only function is calling the base method and returning a result if the return type is not void. ILGenerator il = privateMethodBuilder.GetILGenerator();   EmitCallBaseMethod(method, callBaseMethod, il);   private static void EmitCallBaseMethod(MethodInfo method, MethodInfo callBaseMethod, ILGenerator il) {     int privateParameterCount = method.GetParameters().Length;       il.Emit(OpCodes.Ldarg_0);       if (privateParameterCount > 0)     {         for (int arg = 0; arg < privateParameterCount; arg++)         {             il.Emit(OpCodes.Ldarg_S, arg + 1);         }     }       il.Emit(OpCodes.Call, callBaseMethod);       il.Emit(OpCodes.Ret); } So in the main method building method, an ILGenerator is created from the method builder. The ILGenerator performs the following actions: Load the class (this) onto the stack using the hidden argument Ldarg_0. Create an argument on the stack for each of the method parameters (starting at 1 because 0 is the hidden argument) Call the base method using the Opcodes.Call code and the MethodInfo we created earlier. Call return on the method   Conclusion Now we have the private methods prepared for calling the base method, we have reached the last of the relatively easy part of the proxy building. Hopefully, it hasn’t been too hard to follow so far, there is a lot of code so I haven’t been able to post it all so please check it out at http://rapidioc.codeplex.com/. The next section should be up fairly soon, it’s going to cover creating the delegates for calling the private methods created in this post.   Kind Regards, Sean.

  Read the article

• How about a new platform for your next API&hellip; a CMS?

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2014/05/22/how-about-a-new-platform-for-your-next-apihellip-a.aspxSay what? I’m seeing a type of API emerge which serves static or long-lived resources, which are mostly read-only and have a controlled process to update the data that gets served. Think of something like an app configuration API, where you want a central location for changeable settings. You could use this server side to store database connection strings and keep all your instances in sync, or it could be used client side to push changes out to all users (and potentially driving A/B or MVT testing). That’s a good candidate for a RESTful API which makes proper use of HTTP expiration and validation caching to minimise traffic, but really you want a front end UI where you can edit the current config that the API returns and publish your changes. Sound like a Content Mangement System would be a good fit? I’ve been looking at that and it’s a great fit for this scenario. You get a lot of what you need out of the box, the amount of custom code you need to write is minimal, and you get a whole lot of extra stuff from using CMS which is very useful, but probably not something you’d build if you had to put together a quick UI over your API content (like a publish workflow, fine-grained security and an audit trail). You typically use a CMS for HTML resources, but it’s simple to expose JSON instead – or to do content negotiation to support both, so you can open a resource in a browser and see a nice visual representation, or request it with: Accept=application/json and get the same content rendered as JSON for the app to use. Enter Umbraco Umbraco is an open source .NET CMS that’s been around for a while. It has very good adoption, a lively community and a good release cycle. It’s easy to use, has all the functionality you need for a CMS-driven API, and it’s scalable (although you won’t necessarily put much scale on the CMS layer). In the rest of this post, I’ll build out a simple app config API using Umbraco. We’ll define the structure of the configuration resource by creating a new Document Type and setting custom properties; then we’ll build a very simple Razor template to return configuration documents as JSON; then create a resource and see how it looks. And we’ll look at how you could build this into a wider solution. If you want to try this for yourself, it’s ultra easy – there’s an Umbraco image in the Azure Website gallery, so all you need to to is create a new Website, select Umbraco from the image and complete the installation. It will create a SQL Azure website to store all the content, as well as a Website instance for editing and accessing content. They’re standard Azure resources, so you can scale them as you need. The default install creates a starter site for some HTML content, which you can use to learn your way around (or just delete). 1. Create Configuration Document Type In Umbraco you manage content by creating and modifying documents, and every document has a known type, defining what properties it holds. We’ll create a new Document Type to describe some basic config settings. In the Settings section from the left navigation (spanner icon), expand Document Types and Master, hit the ellipsis and select to create a new Document Type: This will base your new type off the Master type, which gives you some existing properties that we’ll use – like the Page Title which will be the resource URL. In the Generic Properties tab for the new Document Type, you set the properties you’ll be able to edit and return for the resource: Here I’ve added a text string where I’ll set a default cache lifespan, an image which I can use for a banner display, and a date which could show the user when the next release is due. This is the sort of thing that sits nicely in an app config API. It’s likely to change during the life of the product, but not very often, so it’s good to have a centralised place where you can make and publish changes easily and safely. It also enables A/B and MVT testing, as you can change the response each client gets based on your set logic, and their apps will behave differently without needing a release. 2. Define the response template Now we’ve defined the structure of the resource (as a document), in Umbraco we can define a C# Razor template to say how that resource gets rendered to the client. If you only want to provide JSON, it’s easy to render the content of the document by building each property in the response (Umbraco uses dynamic objects so you can specify document properties as object properties), or you can support content negotiation with very little effort. Here’s a template to render the document as HTML or JSON depending on the Accept header, using JSON.NET for the API rendering: @inherits Umbraco.Web.Mvc.UmbracoTemplatePage @using Newtonsoft.Json @{ Layout = null; } @if(UmbracoContext.HttpContext.Request.Headers["accept"] != null &amp;&amp; UmbracoContext.HttpContext.Request.Headers["accept"] == "application/json") { Response.ContentType = "application/json"; @Html.Raw(JsonConvert.SerializeObject(new { cacheLifespan = CurrentPage.cacheLifespan, bannerImageUrl = CurrentPage.bannerImage, nextReleaseDate = CurrentPage.nextReleaseDate })) } else { <h1>App configuration</h1> <p>Cache lifespan: <b>@CurrentPage.cacheLifespan</b></p> <p>Banner Image: </p> <img src="@CurrentPage.bannerImage"> <p>Next Release Date: <b>@CurrentPage.nextReleaseDate</b></p> } That’s a rough-and ready example of what you can do. You could make it completely generic and just render all the document’s properties as JSON, but having a specific template for each resource gives you control over what gets sent out. And the templates are evaluated at run-time, so if you need to change the output – or extend it, say to add caching response headers – you just edit the template and save, and the next client request gets rendered from the new template. No code to build and ship. 3. Create the content With your document type created, in  the Content pane you can create a new instance of that document, where Umbraco gives you a nice UI to input values for the properties we set up on the Document Type: Here I’ve set the cache lifespan to an xs:duration value, uploaded an image for the banner and specified a release date. Each property gets the appropriate input control – text box, file upload and date picker. At the top of the page is the name of the resource – myapp in this example. That specifies the URL for the resource, so if I had a DNS entry pointing to my Umbraco instance, I could access the config with a URL like http://static.x.y.z.com/config/myapp. The setup is all done now, so when we publish this resource it’ll be available to access.  4. Access the resource Now if you open  that URL in the browser, you’ll see the HTML version rendered: - complete with the  image and formatted date. Umbraco lets you save changes and preview them before publishing, so the HTML view could be a good way of showing editors their changes in a usable view, before they confirm them. If you browse the same URL from a REST client, specifying the Accept=application/json request header, you get this response:   That’s the exact same resource, with a managed UI to publish it, being accessed as HTML or JSON with a tiny amount of effort. 5. The wider landscape If you have fairy stable content to expose as an API, I think  this approach is really worth considering. Umbraco scales very nicely, but in a typical solution you probably wouldn’t need it to. When you have additional requirements, like logging API access requests - but doing it out-of-band so clients aren’t impacted, you can put a very thin API layer on top of Umbraco, and cache the CMS responses in your API layer:   Here the API does a passthrough to CMS, so the CMS still controls the content, but it caches the response. If the response is cached for 1 minute, then Umbraco only needs to handle 1 request per minute (multiplied by the number of API instances), so if you need to support 1000s of request per second, you’re scaling a thin, simple API layer rather than having to scale the more complex CMS infrastructure (including the database). This diagram also shows an approach to logging, by asynchronously publishing a message to a queue (Redis in this case), which can be picked up later and persisted by a different process. Does it work? Beautifully. Using Azure, I spiked the solution above (including the Redis logging framework which I’ll blog about later) in half a day. That included setting up different roles in Umbraco to demonstrate a managed workflow for publishing changes, and a couple of document types representing different resources. Is it maintainable? We have three moving parts, which are all managed resources in Azure –  an Azure Website for Umbraco which may need a couple of instances for HA (or may not, depending on how long the content can be cached), a message queue (Redis is in preview in Azure, but you can easily use Service Bus Queues if performance is less of a concern), and the Web Role for the API. Two of the components are off-the-shelf, from open source projects, and the only custom code is the API which is very simple. Does it scale? Pretty nicely. With a single Umbraco instance running as an Azure Website, and with 4x instances for my API layer (Standard sized Web Roles), I got just under 4,000 requests per second served reliably, with a Worker Role in the background saving the access logs. So we had a nice UI to publish app config changes, with a friendly Web preview and a publishing workflow, capable of supporting 14 million requests in an hour, with less than a day’s effort. Worth considering if you’re publishing long-lived resources through your API.

  Read the article

• Java Logger API

  - by Koppar

  This is a more like a tip rather than technical write up and serves as a quick intro for newbies. The logger API helps to diagnose application level or JDK level issues at runtime. There are 7 levels which decide the detailing in logging (SEVERE, WARNING, INFO, CONFIG, FINE, FINER, FINEST). Its best to start with highest level and as we narrow down, use more detailed logging for a specific area. SEVERE is the highest and FINEST is the lowest. This may not make sense until we understand some jargon. The Logger class provides the ability to stream messages to an output stream in a format that can be controlled by the user. What this translates to is, I can create a logger with this simple invocation and use it add debug messages in my class: import java.util.logging.*; private static final Logger focusLog = Logger.getLogger("java.awt.focus.KeyboardFocusManager"); if (focusLog.isLoggable(Level.FINEST)) { focusLog.log(Level.FINEST, "Calling peer setCurrentFocusOwner}); LogManager acts like a book keeper and all the getLogger calls are forwarded to LogManager. The LogManager itself is a singleton class object which gets statically initialized on JVM start up. More on this later. If there is no existing logger with the given name, a new one is created. If there is one (and not yet GC’ed), then the existing Logger object is returned. By default, a root logger is created on JVM start up. All anonymous loggers are made as the children of the root logger. Named loggers have the hierarchy as per their name resolutions. Eg: java.awt.focus is the parent logger for java.awt.focus.KeyboardFocusManager etc. Before logging any message, the logger checks for the log level specified. If null is specified, the log level of the parent logger will be set. However, if the log level is off, no log messages would be written, irrespective of the parent’s log level. All the messages that are posted to the Logger are handled as a LogRecord object.i.e. FocusLog.log would create a new LogRecord object with the log level and message as its data members). The level of logging and thread number are also tracked. LogRecord is passed on to all the registered Handlers. Handler is basically a means to output the messages. The output may be redirected to either a log file or console or a network logging service. The Handler classes use the LogManager properties to set filters and formatters. During initialization or JVM start up, LogManager looks for logging.properties file in jre/lib and sets the properties if the file is provided. An alternate location for properties file can also be specified by setting java.util.logging.config.file system property. This can be set in Java Control Panel ? Java ? Runtime parameters as -Djava.util.logging.config.file = <mylogfile> or passed as a command line parameter java -Djava.util.logging.config.file = C:/Sunita/myLog The redirection of logging depends on what is specified rather registered as a handler with JVM in the properties file. java.util.logging.ConsoleHandler sends the output to system.err and java.util.logging.FileHandler sends the output to file. File name of the log file can also be specified. If you prefer XML format output, in the configuration file, set java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter and if you prefer simple text, set set java.util.logging.FileHandler.formatter =java.util.logging.SimpleFormatter Below is the default logging Configuration file: ############################################################ # Default Logging Configuration File # You can use a different file by specifying a filename # with the java.util.logging.config.file system property. # For example java -Djava.util.logging.config.file=myfile ############################################################ ############################################################ # Global properties ############################################################ # "handlers" specifies a comma separated list of log Handler # classes. These handlers will be installed during VM startup. # Note that these classes must be on the system classpath. # By default we only configure a ConsoleHandler, which will only # show messages at the INFO and above levels. handlers= java.util.logging.ConsoleHandler # To also add the FileHandler, use the following line instead. #handlers= java.util.logging.FileHandler, java.util.logging.ConsoleHandler # Default global logging level. # This specifies which kinds of events are logged across # all loggers. For any given facility this global level # can be overriden by a facility specific level # Note that the ConsoleHandler also has a separate level # setting to limit messages printed to the console. .level= INFO ############################################################ # Handler specific properties. # Describes specific configuration info for Handlers. ############################################################ # default file output is in user's home directory. java.util.logging.FileHandler.pattern = %h/java%u.log java.util.logging.FileHandler.limit = 50000 java.util.logging.FileHandler.count = 1 java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter # Limit the message that are printed on the console to INFO and above. java.util.logging.ConsoleHandler.level = INFO java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter ############################################################ # Facility specific properties. # Provides extra control for each logger. ############################################################ # For example, set the com.xyz.foo logger to only log SEVERE # messages: com.xyz.foo.level = SEVERE Since I primarily use this method to track focus issues, here is how I get detailed awt focus related logging. Just set the logger name to java.awt.focus.level=FINEST and change the default log level to FINEST. Below is a basic sample program. The sample programs are from http://www2.cs.uic.edu/~sloan/CLASSES/java/ and have been modified to illustrate the logging API. By changing the .level property in the logging.properties file, one can control the output written to the logs. To play around with the example, try changing the levels in the logging.properties file and notice the difference in messages going to the log file. Example --------KeyboardReader.java------------------------------------------------------------------------------------- import java.io.*; import java.util.*; import java.util.logging.*; public class KeyboardReader { private static final Logger mylog = Logger.getLogger("samples.input"); public static void main (String[] args) throws java.io.IOException { String s1; String s2; double num1, num2, product; // set up the buffered reader to read from the keyboard BufferedReader br = new BufferedReader (new InputStreamReader (System.in)); System.out.println ("Enter a line of input"); s1 = br.readLine(); if (mylog.isLoggable(Level.SEVERE)) { mylog.log (Level.SEVERE,"The line entered is " + s1); } if (mylog.isLoggable(Level.INFO)) { mylog.log (Level.INFO,"The line has " + s1.length() + " characters"); } if (mylog.isLoggable(Level.FINE)) { mylog.log (Level.FINE,"Breaking the line into tokens we get:"); } int numTokens = 0; StringTokenizer st = new StringTokenizer (s1); while (st.hasMoreTokens()) { s2 = st.nextToken(); numTokens++; if (mylog.isLoggable(Level.FINEST)) { mylog.log (Level.FINEST, " Token " + numTokens + " is: " + s2); } } } } ----------MyFileReader.java---------------------------------------------------------------------------------------- import java.io.*; import java.util.*; import java.util.logging.*; public class MyFileReader extends KeyboardReader { private static final Logger mylog = Logger.getLogger("samples.input.file"); public static void main (String[] args) throws java.io.IOException { String s1; String s2; // set up the buffered reader to read from the keyboard BufferedReader br = new BufferedReader (new FileReader ("MyFileReader.txt")); s1 = br.readLine(); if (mylog.isLoggable(Level.SEVERE)) { mylog.log (Level.SEVERE,"ATTN The line is " + s1); } if (mylog.isLoggable(Level.INFO)) { mylog.log (Level.INFO, "The line has " + s1.length() + " characters"); } if (mylog.isLoggable(Level.FINE)) { mylog.log (Level.FINE,"Breaking the line into tokens we get:"); } int numTokens = 0; StringTokenizer st = new StringTokenizer (s1); while (st.hasMoreTokens()) { s2 = st.nextToken(); numTokens++; if (mylog.isLoggable(Level.FINEST)) { mylog.log (Level.FINEST,"Breaking the line into tokens we get:"); mylog.log (Level.FINEST," Token " + numTokens + " is: " + s2); } } //end of while } // end of main } // end of class ----------MyFileReader.txt------------------------------------------------------------------------------------------ My first logging example -------logging.properties------------------------------------------------------------------------------------------- handlers= java.util.logging.ConsoleHandler, java.util.logging.FileHandler .level= FINEST java.util.logging.FileHandler.pattern = java%u.log java.util.logging.FileHandler.limit = 50000 java.util.logging.FileHandler.count = 1 java.util.logging.FileHandler.formatter = java.util.logging.SimpleFormatter java.util.logging.ConsoleHandler.level = FINEST java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter java.awt.focus.level=ALL ------Output log------------------------------------------------------------------------------------------- May 21, 2012 11:44:55 AM MyFileReader main SEVERE: ATTN The line is My first logging example May 21, 2012 11:44:55 AM MyFileReader main INFO: The line has 24 characters May 21, 2012 11:44:55 AM MyFileReader main FINE: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 1 is: My May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 2 is: first May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 3 is: logging May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 4 is: example Invocation command: "C:\Program Files (x86)\Java\jdk1.6.0_29\bin\java.exe" -Djava.util.logging.config.file=logging.properties MyFileReader References Further technical details are available here: http://docs.oracle.com/javase/1.4.2/docs/guide/util/logging/overview.html#1.0 http://docs.oracle.com/javase/1.4.2/docs/api/java/util/logging/package-summary.html http://www2.cs.uic.edu/~sloan/CLASSES/java/

  Read the article

• Ten - oh, wait, eleven - Eleven things you should know about the ASP.NET Fall 2012 Update

  - by Jon Galloway

  Today, just a little over two months after the big ASP.NET 4.5 / ASP.NET MVC 4 / ASP.NET Web API / Visual Studio 2012 / Web Matrix 2 release, the first preview of the ASP.NET Fall 2012 Update is out. Here's what you need to know: There are no new framework bits in this release - there's no change or update to ASP.NET Core, ASP.NET MVC or Web Forms features. This means that you can start using it without any updates to your server, upgrade concerns, etc. This update is really an update to the project templates and Visual Studio tooling, conceptually similar to the ASP.NET MVC 3 Tools Update. It's a relatively lightweight install. It's a 41MB download. I've installed it many times and usually takes 5-7 minutes; it's never required a reboot. It adds some new project templates to ASP.NET MVC: Facebook Application and Single Page Application templates. It adds a lot of cool enhancements to ASP.NET Web API. It adds some tooling that makes it easy to take advantage of features like SignalR, Friendly URLs, and Windows Azure Authentication. Most of the new features are installed via NuGet packages. Since ASP.NET is open source, nightly NuGet packages are available, and the roadmap is published, most of this has really been publicly available for a while. The official name of this drop is the ASP.NET Fall 2012 Update BUILD Prerelease. Please do not attempt to say that ten times fast. While the EULA doesn't prohibit it, it WILL legally change your first name to Scott. As with all new releases, you can find out everything you need to know about the Fall Update at http://asp.net/vnext (especially the release notes!) I'm going to be showing all of this off, assisted by special guest code monkey Scott Hanselman, this Friday at BUILD: Bleeding edge ASP.NET: See what is next for MVC, Web API, SignalR and more… (and I've heard it will be livestreamed). Let's look at some of those things in more detail. No new bits ASP.NET 4.5, MVC 4 and Web API have a lot of great core features. I see the goal of this update release as making it easier to put those features to use to solve some useful scenarios by taking advantage of NuGet packages and template code. If you create a new ASP.NET MVC application using one of the new templates, you'll see that it's using the ASP.NET MVC 4 RTM NuGet package (4.0.20710.0): This means you can install and use the Fall Update without any impact on your existing projects and no worries about upgrading or compatibility. New Facebook Application Template ASP.NET MVC 4 (and ASP.NET 4.5 Web Forms) included the ability to authenticate your users via OAuth and OpenID, so you could let users log in to your site using a Facebook account. One of the new changes in the Fall Update is a new template that makes it really easy to create full Facebook applications. You could create Facebook application in ASP.NET already, you'd just need to go through a few steps: Search around to find a good Facebook NuGet package, like the Facebook C# SDK (written by my friend Nathan Totten and some other Facebook SDK brainiacs). Read the Facebook developer documentation to figure out how to authenticate and integrate with them. Write some code, debug it and repeat until you got something working. Get started with the application you'd originally wanted to write. What this template does for you: eliminate steps 1-3. Erik Porter, Nathan and some other experts built out the Facebook Application template so it automatically pulls in and configures the Facebook NuGet package and makes it really easy to take advantage of it in an ASP.NET MVC application. One great example is the the way you access a Facebook user's information. Take a look at the following code in a File / New / MVC / Facebook Application site. First, the Home Controller Index action: [FacebookAuthorize(Permissions = "email")] public ActionResult Index(MyAppUser user, FacebookObjectList<MyAppUserFriend> userFriends) { ViewBag.Message = "Modify this template to jump-start your Facebook application using ASP.NET MVC."; ViewBag.User = user; ViewBag.Friends = userFriends.Take(5); return View(); } First, notice that there's a FacebookAuthorize attribute which requires the user is authenticated via Facebook and requires permissions to access their e-mail address. It binds to two things: a custom MyAppUser object and a list of friends. Let's look at the MyAppUser code: using Microsoft.AspNet.Mvc.Facebook.Attributes; using Microsoft.AspNet.Mvc.Facebook.Models; // Add any fields you want to be saved for each user and specify the field name in the JSON coming back from Facebook // https://developers.facebook.com/docs/reference/api/user/ namespace MvcApplication3.Models { public class MyAppUser : FacebookUser { public string Name { get; set; } [FacebookField(FieldName = "picture", JsonField = "picture.data.url")] public string PictureUrl { get; set; } public string Email { get; set; } } } You can add in other custom fields if you want, but you can also just bind to a FacebookUser and it will automatically pull in the available fields. You can even just bind directly to a FacebookUser and check for what's available in debug mode, which makes it really easy to explore. For more information and some walkthroughs on creating Facebook applications, see: Deploying your first Facebook App on Azure using ASP.NET MVC Facebook Template (Yao Huang Lin) Facebook Application Template Tutorial (Erik Porter) Single Page Application template Early releases of ASP.NET MVC 4 included a Single Page Application template, but it was removed for the official release. There was a lot of interest in it, but it was kind of complex, as it handled features for things like data management. The new Single Page Application template that ships with the Fall Update is more lightweight. It uses Knockout.js on the client and ASP.NET Web API on the server, and it includes a sample application that shows how they all work together. I think the real benefit of this application is that it shows a good pattern for using ASP.NET Web API and Knockout.js. For instance, it's easy to end up with a mess of JavaScript when you're building out a client-side application. This template uses three separate JavaScript files (delivered via a Bundle, of course): todoList.js - this is where the main client-side logic lives todoList.dataAccess.js - this defines how the client-side application interacts with the back-end services todoList.bindings.js - this is where you set up events and overrides for the Knockout bindings - for instance, hooking up jQuery validation and defining some client-side events This is a fun one to play with, because you can just create a new Single Page Application and hit F5. Quick, easy install (with one gotcha) One of the cool engineering changes for this release is a big update to the installer to make it more lightweight and efficient. I've been running nightly builds of this for a few weeks to prep for my BUILD demos, and the install has been really quick and easy to use. The install takes about 5 minutes, has never required a reboot for me, and the uninstall is just as simple. There's one gotcha, though. In this preview release, you may hit an issue that will require you to uninstall and re-install the NuGet VSIX package. The problem comes up when you create a new MVC application and see this dialog: The solution, as explained in the release notes, is to uninstall and re-install the NuGet VSIX package: Start Visual Studio 2012 as an Administrator Go to Tools->Extensions and Updates and uninstall NuGet. Close Visual Studio Navigate to the ASP.NET Fall 2012 Update installation folder: For Visual Studio 2012: Program Files\Microsoft ASP.NET\ASP.NET Web Stack\Visual Studio 2012 For Visual Studio 2012 Express for Web: Program Files\Microsoft ASP.NET\ASP.NET Web Stack\Visual Studio Express 2012 for Web Double click on the NuGet.Tools.vsix to reinstall NuGet This took me under a minute to do, and I was up and running. ASP.NET Web API Update Extravaganza! Uh, the Web API team is out of hand. They added a ton of new stuff: OData support, Tracing, and API Help Page generation. OData support Some people like OData. Some people start twitching when you mention it. If you're in the first group, this is for you. You can add a [Queryable] attribute to an API that returns an IQueryable<Whatever> and you get OData query support from your clients. Then, without any extra changes to your client or server code, your clients can send filters like this: /Suppliers?$filter=Name eq ‘Microsoft’ For more information about OData support in ASP.NET Web API, see Alex James' mega-post about it: OData support in ASP.NET Web API ASP.NET Web API Tracing Tracing makes it really easy to leverage the .NET Tracing system from within your ASP.NET Web API's. If you look at the \App_Start\WebApiConfig.cs file in new ASP.NET Web API project, you'll see a call to TraceConfig.Register(config). That calls into some code in the new \App_Start\TraceConfig.cs file: public static void Register(HttpConfiguration configuration) { if (configuration == null) { throw new ArgumentNullException("configuration"); } SystemDiagnosticsTraceWriter traceWriter = new SystemDiagnosticsTraceWriter() { MinimumLevel = TraceLevel.Info, IsVerbose = false }; configuration.Services.Replace(typeof(ITraceWriter), traceWriter); } As you can see, this is using the standard trace system, so you can extend it to any other trace listeners you'd like. To see how it works with the built in diagnostics trace writer, just run the application call some API's, and look at the Visual Studio Output window: iisexpress.exe Information: 0 : Request, Method=GET, Url=http://localhost:11147/api/Values, Message='http://localhost:11147/api/Values' iisexpress.exe Information: 0 : Message='Values', Operation=DefaultHttpControllerSelector.SelectController iisexpress.exe Information: 0 : Message='WebAPI.Controllers.ValuesController', Operation=DefaultHttpControllerActivator.Create iisexpress.exe Information: 0 : Message='WebAPI.Controllers.ValuesController', Operation=HttpControllerDescriptor.CreateController iisexpress.exe Information: 0 : Message='Selected action 'Get()'', Operation=ApiControllerActionSelector.SelectAction iisexpress.exe Information: 0 : Operation=HttpActionBinding.ExecuteBindingAsync iisexpress.exe Information: 0 : Operation=QueryableAttribute.ActionExecuting iisexpress.exe Information: 0 : Message='Action returned 'System.String[]'', Operation=ReflectedHttpActionDescriptor.ExecuteAsync iisexpress.exe Information: 0 : Message='Will use same 'JsonMediaTypeFormatter' formatter', Operation=JsonMediaTypeFormatter.GetPerRequestFormatterInstance iisexpress.exe Information: 0 : Message='Selected formatter='JsonMediaTypeFormatter', content-type='application/json; charset=utf-8'', Operation=DefaultContentNegotiator.Negotiate iisexpress.exe Information: 0 : Operation=ApiControllerActionInvoker.InvokeActionAsync, Status=200 (OK) iisexpress.exe Information: 0 : Operation=QueryableAttribute.ActionExecuted, Status=200 (OK) iisexpress.exe Information: 0 : Operation=ValuesController.ExecuteAsync, Status=200 (OK) iisexpress.exe Information: 0 : Response, Status=200 (OK), Method=GET, Url=http://localhost:11147/api/Values, Message='Content-type='application/json; charset=utf-8', content-length=unknown' iisexpress.exe Information: 0 : Operation=JsonMediaTypeFormatter.WriteToStreamAsync iisexpress.exe Information: 0 : Operation=ValuesController.Dispose API Help Page When you create a new ASP.NET Web API project, you'll see an API link in the header: Clicking the API link shows generated help documentation for your ASP.NET Web API controllers: And clicking on any of those APIs shows specific information: What's great is that this information is dynamically generated, so if you add your own new APIs it will automatically show useful and up to date help. This system is also completely extensible, so you can generate documentation in other formats or customize the HTML help as much as you'd like. The Help generation code is all included in an ASP.NET MVC Area: SignalR SignalR is a really slick open source project that was started by some ASP.NET team members in their spare time to add real-time communications capabilities to ASP.NET - and .NET applications in general. It allows you to handle long running communications channels between your server and multiple connected clients using the best communications channel they can both support - websockets if available, falling back all the way to old technologies like long polling if necessary for old browsers. SignalR remains an open source project, but now it's being included in ASP.NET (also open source, hooray!). That means there's real, official ASP.NET engineering work being put into SignalR, and it's even easier to use in an ASP.NET application. Now in any ASP.NET project type, you can right-click / Add / New Item... SignalR Hub or Persistent Connection. And much more... There's quite a bit more. You can find more info at http://asp.net/vnext, and we'll be adding more content as fast as we can. Watch my BUILD talk to see as I demonstrate these and other features in the ASP.NET Fall 2012 Update, as well as some other even futurey-er stuff!

  Read the article

• Oracle Fusion Applications: Changing the Game

  - by kellsey.ruppel(at)oracle.com

  Originally posted in the Oracle Profit Magazine, November 2010 Edition. When the order processing system red-flags a customer's credit status, the IT department doesn't get the customer's call. When a supplier misses a delivery date for a key automotive assembly, it's not the CIO who has to answer for the error. Knowledge workers (known in IT circles as "users") are on the front lines when an exception occurs in an established business process. They're also the ones who study sales trends to decide when to open a new store in an up-and-coming neighborhood, which products are most profitable, how employee skill sets are evolving, and which suppliers are most efficient. In short, knowledge workers are masters of business as unusual. Traditional enterprise resource planning (ERP) systems and other familiar enterprise applications excel at automating, managing, and executing standard business processes. These programs shine when everything goes as planned. Life gets even trickier when a traditional application needs to be extended with a new service or an extra step is added to a business process when new products are brought to market, divisions are merged, or companies are acquired. Monolithic applications often need the IT department to step in and make the necessary adjustments--incurring additional costs and delays. Until now. When Oracle unveiled the much-anticipated family of Oracle Fusion Applications at Oracle OpenWorld in September 2010, knowledge workers in particular had a lot to cheer about. Business users will soon have ready access to analytical information and collaboration tools in the context of what they are working on, so they can make better decisions when problems or opportunities arise. Additionally, the Oracle Fusion Applications platform will make it easy for business users to tweak processes, create new capabilities, and find information, often without the need for IT department assistance and while still following company guidelines. And IT leaders will be happy to hear about new deployment options, guided implementation and setup tools, and cost-saving management capabilities. Just as important, the underlying technologies in Oracle Fusion Applications will allow organizations to choose among their existing investments and next-generation enterprise applications so they can introduce innovations at a pace that makes the most business and financial sense. "Oracle Fusion Applications are architected so you don't have to do rip and replace," says Jim Hayes, managing director of the consulting firm Accenture. "That's very important for creating a business case that will get through the steering committee and be approved by the board. It shows you can drive value and make a difference in the near term." For these and other reasons, analysts and early adopters are calling Oracle Fusion Applications a game changer for enterprise customers. The differences become apparent in three key areas: the way we innovate, work, and adopt technology. Game Changer #1: New Standard for InnovationChange is a constant challenge for most businesses, whether the catalysts are market dynamics, new competition, or the ever-expanding regulatory environment. And, in an ongoing effort to differentiate, business leaders are constantly looking for new ways to do business, serve constituents, and bring new products and services to market. In addition, companies face significant costs to keep their applications up-to-date. For example, when a company adds new suppliers to a procurement system, the IT shop typically has to invest time, effort, and even consulting fees for custom integrations that allow various ERP systems to communicate with each other. Oracle Fusion Applications were built on Web services and a modular SOA foundation to ease customizations and integration activities among all applications--whether from Oracle or another vendor. Interfaces and updates written in ubiquitous Java, rather than a proprietary coding language, allow organizations to tap into existing in-house technical skills rather than seek expensive outside specialists. And with SOA, organizations can extend a feature set or integrate with other SOA environments by combining Web services such as "look up customer" into a new business process managed by the BPEL orchestration engine. Flexibility like this has long-term implications. "Because users capture these changes at a higher metadata layer, not in the application's code, changes and additions are protected even as new versions of Oracle Fusion Applications are released," says Steve Miranda, senior vice president of applications development at Oracle. "This is a much more sustainable approach because you don't incur costly customizations that prevent upgrades and other innovations." And changes are easier to make: if one change is made in the metadata, that change is automatically reflected throughout the application interface, business intelligence, business process, and business logic. Game Changer #2: New Standard for WorkBoosting productivity comes down to doing the basics right: running business processes more efficiently and managing exceptions more effectively, so users can accomplish more in the course of a day or spend more quality time with the most profitable customers. The fastest way to improve process efficiency is to reduce the number of steps it takes to execute common tasks, such as ordering office equipment from an internal procurement system. Oracle Fusion Applications will deliver a complete role-based user experience with business intelligence and collaboration capabilities provided in the context of the work at hand. "We created every Oracle Fusion Applications screen by asking 'What does the user need to know?' 'What does he or she need to do?' and 'Who do they need to work with to get the job done?'" Miranda explains. So when the sales department heads need new laptops, the self-service procurement screen will not only display a list of approved vendors and configurations, but also a running list of reviews by coworkers who recently purchased the various models. Embedded intelligence may also display prevailing delivery lead times based on actual order histories, not the generic shipping dates vendors may quote. The pervasive business intelligence serves many other business activities across all areas of the enterprise. For example, a manager considering whether to promote a direct report can see the person's employee profile, with a salary history, appraisal summaries, and a rundown of skills and training. This approach to business intelligence also has implications for supply chain management. "One of the challenges at Ingersoll Rand is lack of visibility in our supply chain," says Mike Macrie, global director of enterprise applications for global industrial firm Ingersoll Rand. "Oracle Fusion Applications are going to provide the embedded intelligence to give us that visibility and give us the ability to analyze those orders at any point in our supply chain." Oracle Fusion Applications will also create a "role-based user experience" that displays a work list of events that need attention, based on user job function. Role awareness guides users with daily lists of action items and exceptions. So a credit manager may see seven invoices with discounts that are about to expire or 12 suppliers that have been put on hold because credit memos are awaiting approval. Individualization extends to the search capabilities of Oracle Fusion Applications. The platform uses Web-style search screens powered by an Oracle enterprise search engine, with a security framework that filters search results so individuals will only see the internal information they're authorized to access. A further aid to productivity is Oracle Fusion Applications' integration with Web 2.0 collaboration and social networking resources for business environments. Hover-over text will reveal relevant contact information whenever the name of a person appears in an Oracle Fusion Application. Users can connect via an online chat, phone call, or instant message without leaving the main application, reducing the time required for an accounts payable staffer to resolve a mismatch between an invoiced charge and the service record, for example. Addresses of suppliers, customers, or partners will also initiate hover-over text to show contact details and Web-based maps. Finally, Oracle Fusion Applications will promote a new way of working with purpose-driven communities that can bring new efficiencies to everything from cultivating sales leads to managing new projects. As soon as a lead or project materializes, the applications will automatically gather relevant participants into an online community that shares member contact information, schedules, discussion forums, and Wiki pages. "Oracle Fusion Applications will allow us to take it to the next level with embedded Web 2.0 tools and the embedded analytics," says Steve Printz, CIO and vice president, supply chain management, at window-and-door manufacturer Pella. "[This] allows those employees today who are processing transactions to really contribute to the success of the company and become decision-makers." Game Changer #3: New Standard for Technology AdoptionAs IT becomes a dominant component of how businesses run and compete, organizations need to lower the cost of implementing applications and introducing new application features. In the past, rolling out new code often required creating a test bed system, moving beta code to a separate system for user feedback, and--once all the revisions were made--moving version one of the software onto production systems, where business users could finally get the needed new features. Oracle Fusion Applications will use a dedicated setup manager application to streamline this process. First, the setup manager will help scope out the project, querying users about their requirements. "From those questions and answers we determine the steps and the order of those steps that will enable that task," Miranda says. Next, system utilities will assign tasks to owners, track completion status, and monitor the overall status of a programming effort. Oracle Fusion Applications can then recommend Web services that allow users to migrate setup choices and steps across all the various deployments of the application. Those setup capabilities automate the migration from test systems to production systems, as well as between different business units that may be using the same application. "The self-service ability of the setup manager helps business users change setups with very little intervention from the IT team," says Ravi Kumar, vice president at IT services company Infosys. "That to me is a big difference from how we've viewed enterprise applications before." For additional flexibility, organizations will be able to adopt Oracle Fusion Applications modules in either of two modes: a single-instance alternative uses one database for all Oracle Fusion Applications, while a "pillar mode" creates separate databases to underpin each application. This means IT departments running any one of Oracle's applications or even third-party applications can plug Oracle Fusion Applications modules into their environment and see additional business value created on top of their existing systems. And Oracle Fusion Applications offer a hybrid approach to deployment. The applications are all software-as-a-service-ready, so customers can choose on-premises, public or private cloud, or a combination of these to suit their business needs. It's that combination of flexibility and a roadmap for the future that may be the biggest game changer of all. "The Oracle Fusion Applications architecture allows us to migrate our company at a pace that's consistent with our business strategy, whereas before we might have had to do it with a massive upgrade," says Macrie of Ingersoll Rand. "We're looking forward to that architecture to really give us more flexibility in how we migrate over time." For More InformationUser Input Key to the Success of Oracle Fusion ApplicationsTransforming Coexistence into Strategic ValueUnder the HoodOracle Fusion ApplicationsOracle Service-Oriented Architecture  

  Read the article

• Entity Framework version 1- Brief Synopsis and Tips &ndash; Part 1

  - by Rohit Gupta

  To Do Eager loading use Projections (for e.g. from c in context.Contacts select c, c.Addresses)  or use Include Query Builder Methods (Include(“Addresses”)) If there is multi-level hierarchical Data then to eager load all the relationships use Include Query Builder methods like customers.Include("Order.OrderDetail") to include Order and OrderDetail collections or use customers.Include("Order.OrderDetail.Location") to include all Order, OrderDetail and location collections with a single include statement =========================================================================== If the query uses Joins then Include() Query Builder method will be ignored, use Nested Queries instead If the query does projections then Include() Query Builder method will be ignored Use Address.ContactReference.Load() OR Contact.Addresses.Load() if you need to Deferred Load Specific Entity – This will result in extra round trips to the database ObjectQuery<> cannot return anonymous types... it will return a ObjectQuery<DBDataRecord> Only Include method can be added to Linq Query Methods Any Linq Query method can be added to Query Builder methods. If you need to append a Query Builder Method (other than Include) after a LINQ method  then cast the IQueryable<Contact> to ObjectQuery<Contact> and then append the Query Builder method to it =========================================================================== Query Builder methods are Select, Where, Include Methods which use Entity SQL as parameters e.g. "it.StartDate, it.EndDate" When Query Builder methods do projection then they return ObjectQuery<DBDataRecord>, thus to iterate over this collection use contact.Item[“Name”].ToString() When Linq To Entities methods do projection, they return collection of anonymous types --- thus the collection is strongly typed and supports Intellisense EF Object Context can track changes only on Entities, not on Anonymous types. If you use a Defining Query for a EntitySet then the EntitySet becomes readonly since a Defining Query is the same as a View (which is treated as a ReadOnly by default). However if you want to use this EntitySet for insert/update/deletes then we need to map stored procs (as created in the DB) to the insert/update/delete functions of the Entity in the Designer You can use either Execute method or ToList() method to bind data to datasources/bindingsources If you use the Execute Method then remember that you can traverse through the ObjectResult<> collection (returned by Execute) only ONCE. In WPF use ObservableCollection to bind to data sources , for keeping track of changes and letting EF send updates to the DB automatically. Use Extension Methods to add logic to Entities. For e.g. create extension methods for the EntityObject class. Create a method in ObjectContext Partial class and pass the entity as a parameter, then call this method as desired from within each entity. ================================================================ DefiningQueries and Stored Procedures: For Custom Entities, one can use DefiningQuery or Stored Procedures. Thus the Custom Entity Collection will be populated using the DefiningQuery (of the EntitySet) or the Sproc. If you use Sproc to populate the EntityCollection then the query execution is immediate and this execution happens on the Server side and any filters applied will be applied in the Client App. If we use a DefiningQuery then these queries are composable, meaning the filters (if applied to the entityset) will all be sent together as a single query to the DB, returning only filtered results. If the sproc returns results that cannot be mapped to existing entity, then we first create the Entity/EntitySet in the CSDL using Designer, then create a dummy Entity/EntitySet using XML in the SSDL. When creating a EntitySet in the SSDL for this dummy entity, use a TSQL that does not return any results, but does return the relevant columns e.g. select ContactID, FirstName, LastName from dbo.Contact where 1=2 Also insure that the Entity created in the SSDL uses the SQL DataTypes and not .NET DataTypes. If you are unable to open the EDMX file in the designer then note the Errors ... they will give precise info on what is wrong. The Thrid option is to simply create a Native Query in the SSDL using <Function Name="PaymentsforContact" IsComposable="false">   <CommandText>SELECT ActivityId, Activity AS ActivityName, ImagePath, Category FROM dbo.Activities </CommandText></FuncTion> Then map this Function to a existing Entity. This is a quick way to get a custom Entity which is regular Entity with renamed columns or additional columns (which are computed columns). The disadvantage to using this is that It will return all the rows from the Defining query and any filter (if defined) will be applied only at the Client side (after getting all the rows from DB). If you you DefiningQuery instead then we can use that as a Composable Query. The Fourth option (for mapping a READ stored proc results to a non-existent Entity) is to create a View in the Database which returns all the fields that the sproc also returns, then update the Model so that the model contains this View as a Entity. Then map the Read Sproc to this View Entity. The other option would be to simply create the View and remove the sproc altogether. ================================================================ To Execute a SProc that does not return a entity, use a EntityCommand to execute that proc. You cannot call a sproc FunctionImport that does not return Entities From Code, the only way is to use SSDL function calls using EntityCommand.  This changes with EntityFramework Version 4 where you can return Scalar Types, Complex Types, Entities or NonQuery ================================================================ UDF when created as a Function in SSDL, we need to set the Name & IsComposable properties for the Function element. IsComposable is always false for Sprocs, for UDF's set this to true. You cannot call UDF "Function" from within code since you cannot import a UDF Function into the CSDL Model (with Version 1 of EF). only stored procedures can be imported and then mapped to a entity ================================================================ Entity Framework requires properties that are involved in association mappings to be mapped in all of the function mappings for the entity (Insert, Update and Delete). Because Payment has an association to Reservation... hence we need to pass both the paymentId and reservationId to the Delete sproc even though just the paymentId is the PK on the Payment Table. ================================================================ When mapping insert, update and delete procs to a Entity, insure that all the three or none are mapped. Further if you have a base class and derived class in the CSDL, then you must map (ins, upd, del) sprocs to all parent and child entities in the inheritance relationship. Note that this limitation that base and derived entity methods must all must be mapped does not apply when you are mapping Read Stored Procedures.... ================================================================ You can write stored procedures SQL directly into the SSDL by creating a Function element in the SSDL and then once created, you can map this Function to a CSDL Entity directly in the designer during Function Import ================================================================ You can do Entity Splitting such that One Entity maps to multiple tables in the DB. For e.g. the Customer Entity currently derives from Contact Entity...in addition it also references the ContactPersonalInfo Entity. One can copy all properties from the ContactPersonalInfo Entity into the Customer Entity and then Delete the CustomerPersonalInfo entity, finall one needs to map the copied properties to the ContactPersonalInfo Table in Table Mapping (by adding another table (ContactPersonalInfo) to the Table Mapping... this is called Entity Splitting. Thus now when you insert a Customer record, it will automatically create SQL to insert records into the Contact, Customers and ContactPersonalInfo tables even though you have a Single Entity called Customer in the CSDL =================================================================== There is Table by Type Inheritance where another EDM Entity can derive from another EDM entity and absorb the inherted entities properties, for example in the Break Away Geek Adventures EDM, the Customer entity derives (inherits) from the Contact Entity and absorbs all the properties of Contact entity. Thus when you create a Customer Entity in Code and then call context.SaveChanges the Object Context will first create the TSQL to insert into the Contact Table followed by a TSQL to insert into the Customer table =================================================================== Then there is the Table per Hierarchy Inheritance..... where different types are created based on a condition (similar applying a condition to filter a Entity to contain filtered records)... the diference being that the filter condition populates a new Entity Type (derived from the base Entity). In the BreakAway sample the example is Lodging Entity which is a Abstract Entity and Then Resort and NonResort Entities which derive from Lodging Entity and records are filtered based on the value of the Resort Boolean field =================================================================== Then there is Table per Concrete Type Hierarchy where we create a concrete Entity for each table in the database. In the BreakAway sample there is a entity for the Reservation table and another Entity for the OldReservation table even though both the table contain the same number of fields. The OldReservation Entity can then inherit from the Reservation Entity and configure the OldReservation Entity to remove all Scalar Properties from the Entity (since it inherits the properties from Reservation and filters based on ReservationDate field) =================================================================== Complex Types (Complex Properties) Entities in EF can also contain Complex Properties (in addition to Scalar Properties) and these Complex Properties reference a ComplexType (not a EntityType) DropdownList, ListBox, RadioButtonList, CheckboxList, Bulletedlist are examples of List server controls (not data bound controls) these controls cannot use Complex properties during databinding, they need Scalar Properties. So if a Entity contains Complex properties and you need to bind those to list server controls then use projections to return Scalar properties and bind them to the control (the disadvantage is that projected collections are not tracked by the Object Context and hence cannot persist changes to the projected collections bound to controls) ObjectDataSource and EntityDataSource do account for Complex properties and one can bind entities with Complex Properties to Data Source controls and they will be tracked for changes... with no additional plumbing needed to persist changes to these collections bound to controls So DataBound controls like GridView, FormView need to use EntityDataSource or ObjectDataSource as a datasource for entities that contain Complex properties so that changes to the datasource done using the GridView can be persisted to the DB (enabling the controls for updates)....if you cannot use the EntityDataSource you need to flatten the ComplexType Properties using projections With EF Version 4 ComplexTypes are supported by the Designer and can add/remove/compose Complex Types directly using the Designer =================================================================== Conditional Mapping ... is like Table per Hierarchy Inheritance where Entities inherit from a base class and then used conditions to populate the EntitySet (called conditional Mapping). Conditional Mapping has limitations since you can only use =, is null and IS NOT NULL Conditions to do conditional mapping. If you need more operators for filtering/mapping conditionally then use QueryView(or possibly Defining Query) to create a readonly entity. QueryView are readonly by default... the EntitySet created by the QueryView is enabled for change tracking by the ObjectContext, however the ObjectContext cannot create insert/update/delete TSQL statements for these Entities when SaveChanges is called since it is QueryView. One way to get around this limitation is to map stored procedures for the insert/update/delete operations in the Designer. =================================================================== Difference between QueryView and Defining Query : QueryView is defined in the (MSL) Mapping File/section of the EDM XML, whereas the DefiningQuery is defined in the store schema (SSDL). QueryView is written using Entity SQL and is this database agnostic and can be used against any database/Data Layer. DefiningQuery is written using Database Lanaguage i.e. TSQL or PSQL thus you have more control =================================================================== Performance: Lazy loading is deferred loading done automatically. lazy loading is supported with EF version4 and is on by default. If you need to turn it off then use context.ContextOptions.lazyLoadingEnabled = false To improve Performance consider PreCompiling the ObjectQuery using the CompiledQuery.Compile method

  Read the article

• The HTG Guide to Using a Bluetooth Keyboard with Your Android Device

  - by Matt Klein

  Android devices aren’t usually associated with physical keyboards. But, since Google is now bundling their QuickOffice app with the newly-released Kit-Kat, it appears inevitable that at least some Android tablets (particularly 10-inch models) will take on more productivity roles. In recent years, physical keyboards have been rendered obsolete by swipe style input methods such as Swype and Google Keyboard. Physical keyboards tend to make phones thick and plump, and that won’t fly today when thin (and even flexible and curved) is in vogue. So, you’ll be hard-pressed to find smartphone manufacturers launching new models with physical keyboards, thus rendering sliders to a past chapter in mobile phone evolution. It makes sense to ditch the clunky keyboard phone in favor of a lighter, thinner model. You’re going to carry around in your pocket or purse all day, why have that extra bulk and weight? That said, there is sound logic behind pairing tablets with keyboards. Microsoft continues to plod forward with its Surface models, and while critics continue to lavish praise on the iPad, its functionality is obviously enhanced and extended when you add a physical keyboard. Apple even has an entire page devoted specifically to iPad-compatible keyboards. But an Android tablet and a keyboard? Does such a thing even exist? They do actually. There are docking keyboards and keyboard/case combinations, there’s the Asus Transformer family, Logitech markets a Windows 8 keyboard that speaks “Android”, and these are just to name a few. So we know that keyboard products that are designed to work with Android exist, but what about an everyday Bluetooth keyboard you might use with Windows or OS X? How-To Geek wanted look at how viable it is to use such a keyboard with Android. We conducted some research and examined some lists of Android keyboard shortcuts. Most of what we found was long outdated. Many of the shortcuts don’t even apply anymore, while others just didn’t work. Regardless, after a little experimentation and a dash of customization, it turns out using a keyboard with Android is kind of fun, and who knows, maybe it will catch on. Setting things up Setting up a Bluetooth keyboard with Android is very easy. First, you’ll need a Bluetooth keyboard and of course an Android device, preferably running version 4.1 (Jelly Bean) or higher. For our test, we paired a second-generation Google Nexus 7 running Android 4.3 with a Samsung Series 7 keyboard. In Android, enable Bluetooth if it isn’t already on. We’d like to note that if you don’t normally use Bluetooth accessories and peripherals with your Android device (or any device really), it’s best practice to leave Bluetooth off because, like GPS, it drains the device’s battery more quickly. To enable Bluetooth, simply go to “Settings” -> “Bluetooth” and tap the slider button to “On”. To set up the keyboard, make sure it is on and then tap “Bluetooth” in the Android settings. On the resulting screen, your Android device should automatically search for and hopefully find your keyboard. If you don’t get it right the first time, simply turn the keyboard on again and then tap “Search for Devices” to try again. If it still doesn’t work, make sure you have fresh batteries and the keyboard isn’t paired to another device. If it is, you will need to unpair it before it will work with your Android device (consult your keyboard manufacturer’s documentation or Google if you don’t know how to do this). When Android finds your keyboard, select it under “Available Devices” … … and you should be prompted to type in a code: If successful, you will see that device is now “Connected” and you’re ready to go. If you want to test things out, try pressing the “Windows” key (“Apple” or “Command”) + ESC, and you will be whisked to your Home screen. So, what can you do? Traditional Mac and Windows users know there’s usually a keyboard shortcut for just about everything (and if there isn’t, there’s all kinds of ways to remap keys to do a variety of commands, tasks, and functions). So where does Android fall in terms of baked-in keyboard commands? There answer to that is kind of enough, but not too much. There are definitely established combos you can use to get around, but they aren’t clear and there doesn’t appear to be any one authority on what they are. Still, there is enough keyboard functionality in Android to make it a viable option, if only for those times when you need to get something done (long e-mail or important document) and an on-screen keyboard simply won’t do. It’s important to remember that Android is, and likely always will be a touch-first interface. That said, it does make some concessions to physical keyboards. In other words, you can get around Android fairly well without having to lift your hands off the keys, but you will still have to tap the screen regularly, unless you add a mouse. For example, you can wake your device by tapping a key rather than pressing its power button. However, if your device is slide or pattern-locked, then you’ll have to use the touchscreen to unlock it – a password or PIN however, works seamlessly with a keyboard – other things like widgets and app controls and features, have to be tapped. You get the idea. Keyboard shortcuts and navigation As we said, baked-in keyboard shortcut combos aren’t necessarily abundant nor apparent. The one thing you can always do is search. Any time you want to Google something, start typing from the Home screen and the search screen will automatically open and begin displaying results. Other than that, here is what we were able to figure out: ESC = go back CTRL + ESC = menu CTRL + ALT + DEL = restart (no questions asked) ALT + SPACE = search page (say “OK Google” to voice search) ALT + TAB (ALT + SHIFT + TAB) = switch tasks Also, if you have designated volume function keys, those will probably work too. There’s also some dedicated app shortcuts like calculator, Gmail, and a few others: CMD + A = calculator CMD + C = contacts CMD + E = e-mail CMD + G = Gmail CMD + L = Calendar CMD + P = Play Music CMD + Y = YouTube Overall, it’s not a long comprehensive list and there’s no dedicated keyboard combos for the full array of Google’s products. Granted, it’s hard to imagine getting a lot of mileage out of a keyboard with Maps but with something like Keep, you could type out long, detailed lists on your tablet, and then view them on your smartphone when you go out shopping. You can also use the arrow keys to navigate your Home screen over shortcuts and open the app drawer. When something on the screen is selected, it will be highlighted in blue. Press “Enter” to open your selection. Additionally, if an app has its own set of shortcuts, e.g. Gmail has quite a few unique shortcuts to it, as does Chrome, some – though not many – will work in Android (not for YouTube though). Also, many “universal” shortcuts such as Copy (CTRL + C), Cut (CTRL + X), Paste (CTRL + V), and Select All (CTRL + A) work where needed – such as in instant messaging, e-mail, social media apps, etc. Creating custom application shortcuts What about custom shortcuts? When we were researching this article, we were under the impression that it was possible to assign keyboard combinations to specific apps, such as you could do on older Android versions such as Gingerbread. This no long seems to be the case and nowhere in “Settings” could we find a way to assign hotkey combos to any of our favorite, oft-used apps or functions. If you do want custom keyboard shortcuts, what can you do? Luckily, there’s an app on Google Play that allows you to, among other things, create custom app shortcuts. It is called External Keyboard Helper (EKH) and while there is a free demo version, the pay version is only a few bucks. We decided to give EKH a whirl and through a little experimentation and finally reading the developer’s how-to, we found we could map custom keyboard combos to just about anything. To do this, first open the application and you’ll see the main app screen. Don’t worry about choosing a custom layout or anything like that, you want to go straight to the “Advanced settings”: In the “Advanced settings” select “Application shortcuts” to continue: You can have up to 16 custom application shortcuts. We are going to create a custom shortcut to the Facebook app. We choose “A0”, and from the resulting list, Facebook. You can do this for any number of apps, services, and settings. As you can now see, the Facebook app has now been linked to application-zero (A0): Go back to the “Advanced settings” and choose “Customize keyboard mappings”: You will be prompted to create a custom keyboard layout so we choose “Custom 1”: When you choose to create a custom layout, you can do a great many more things with your keyboard. For example, many keyboards have predefined function (Fn) keys, which you can map to your tablet’s brightness controls, toggle WiFi on/off, and much more. A word of advice, the application automatically remaps certain keys when you create a custom layout. This might mess up some existing keyboard combos. If you simply want to add some functionality to your keyboard, you can go ahead and delete EKH’s default changes and start your custom layout from scratch. To create a new combo, select “Add new key mapping”: For our new shortcut, we are going to assign the Facebook app to open when we key in “ALT + F”. To do this, we press the “F” key while in the “Scancode” field and we see it returns a value of “33”. If we wanted to use a different key, we can press “Change” and scan another key’s numerical value. We now want to assign the “ALT” key to application “A0”, previously designated as the Facebook app. In the “AltGr” field, we enter “A0” and then “Save” our custom combo. And now we see our new application shortcut. Now, as long as we’re using our custom layout, every time we press “ALT + F”, the Facebook app will launch: External Keyboard Helper extends far beyond simple application shortcuts and if you are looking for deeper keyboard customization options, you should definitely check it out. Among other things, EKH also supports dozens of languages, allows you to quickly switch between layouts using a key or combo, add up to 16 custom text shortcuts, and much more! It can be had on Google Play for $2.53 for the full version, but you can try the demo version for free. More extensive documentation on how to use the app is also available. Android? Keyboard? Sure, why not? Unlike traditional desktop operating systems, you don’t need a physical keyboard and mouse to use a mobile operating system. You can buy an iPad or Nexus 10 or Galaxy Note, and never need another accessory or peripheral – they work as intended right out of the box. It’s even possible you can write the next great American novel on one these devices, though that might require a lot of practice and patience. That said, using a keyboard with Android is kind of fun. It’s not revelatory but it does elevate the experience. You don’t even need to add customizations (though they are nice) because there are enough existing keyboard shortcuts in Android to make it usable. Plus, when it comes to inputting text such as in an editor or terminal application, we fully advocate big, physical keyboards. Bottom line, if you’re looking for a way to enhance your Android tablet, give a keyboard a chance. Do you use your Android device for productivity? Is a physical keyboard an important part of your setup? Do you have any shortcuts that we missed? Sound off in the comments and let us know what you think.     

  Read the article

• Silverlight for Windows Embedded tutorial (step 6)

  - by Valter Minute

  In this tutorial step we will develop a very simple clock application that may be used as a screensaver on our devices and will allow us to discover a new feature of Silverlight for Windows Embedded (transforms) and how to use an “old” feature of Windows CE (timers) inside a Silverlight for Windows Embedded application. Let’s start with some XAML, as usual: <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Width="640" Height="480" FontSize="18" x:Name="Clock">   <Canvas x:Name="LayoutRoot" Background="#FF000000"> <Grid Height="24" Width="150" Canvas.Left="320" Canvas.Top="234" x:Name="SecondsHand" Background="#FFFF0000"> <TextBlock Text="Seconds" TextWrapping="Wrap" Width="50" HorizontalAlignment="Right" VerticalAlignment="Center" x:Name="SecondsText" Foreground="#FFFFFFFF" TextAlignment="Right" Margin="2,2,2,2"/> </Grid> <Grid Height="24" x:Name="MinutesHand" Width="100" Background="#FF00FF00" Canvas.Left="320" Canvas.Top="234"> <TextBlock HorizontalAlignment="Right" x:Name="MinutesText" VerticalAlignment="Center" Width="50" Text="Minutes" TextWrapping="Wrap" Foreground="#FFFFFFFF" TextAlignment="Right" Margin="2,2,2,2"/> </Grid> <Grid Height="24" x:Name="HoursHand" Width="50" Background="#FF0000FF" Canvas.Left="320" Canvas.Top="234"> <TextBlock HorizontalAlignment="Right" x:Name="HoursText" VerticalAlignment="Center" Width="50" Text="Hours" TextWrapping="Wrap" Foreground="#FFFFFFFF" TextAlignment="Right" Margin="2,2,2,2"/> </Grid> </Canvas> </UserControl> This XAML file defines three grid panels, one for each hand of our clock (we are implementing an analog clock using one of the most advanced technologies of the digital world… how cool is that?). Inside each hand we put a TextBlock that will be used to display the current hour, minute, second inside the dial (you can’t do that on plain old analog clocks, but it looks nice). As usual we use XAML2CPP to generate the boring part of our code. We declare a class named “Clock” and derives from the TClock template that XAML2CPP has declared for us. class Clock : public TClock<Clock> { ... }; Our WinMain function is more or less the same we used in all the previous samples. It initializes the XAML runtime, create an instance of our class, initialize it and shows it as a dialog: int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { if (!XamlRuntimeInitialize()) return -1;   HRESULT retcode;   IXRApplicationPtr app; if (FAILED(retcode=GetXRApplicationInstance(&app))) return -1; Clock clock;   if (FAILED(clock.Init(hInstance,app))) return -1;     UINT exitcode;   if (FAILED(clock.GetVisualHost()->StartDialog(&exitcode))) return -1;   return exitcode; } Silverlight for Windows Embedded provides a lot of features to implement our UI, but it does not provide timers. How we can update our clock if we don’t have a timer feature? We just use plain old Windows timers, as we do in “regular” Windows CE applications! To use a timer in WinCE we should declare an id for it: #define IDT_CLOCKUPDATE 0x12341234 We also need an HWND that will be used to receive WM_TIMER messages. Our Silverlight for Windows Embedded page is “hosted” inside a GWES Window and we can retrieve its handle using the GetContainerHWND function of our VisualHost object. Let’s see how this is implemented inside our Clock class’ Init method: HRESULT Init(HINSTANCE hInstance,IXRApplication* app) { HRESULT retcode;   if (FAILED(retcode=TClock<Clock>::Init(hInstance,app))) return retcode;   // create the timer user to update the clock HWND clockhwnd;   if (FAILED(GetVisualHost()->GetContainerHWND(&clockhwnd))) return -1;   timer=SetTimer(clockhwnd,IDT_CLOCKUPDATE,1000,NULL); return 0; } We use SetTimer to create a new timer and GWES will send a WM_TIMER to our window every second, giving us a chance to update our clock. That sounds great… but how could we handle the WM_TIMER message if we didn’t implement a window procedure for our window? We have to move a step back and look how a visual host is created. This code is generated by XAML2CPP and is inside xaml2cppbase.h: virtual HRESULT CreateHost(HINSTANCE hInstance,IXRApplication* app) { HRESULT retcode; XRWindowCreateParams wp;   ZeroMemory(&wp, sizeof(XRWindowCreateParams)); InitWindowParms(&wp);   XRXamlSource xamlsrc;   SetXAMLSource(hInstance,&xamlsrc); if (FAILED(retcode=app->CreateHostFromXaml(&xamlsrc, &wp, &vhost))) return retcode;   if (FAILED(retcode=vhost->GetRootElement(&root))) return retcode; return S_OK; } As you can see the CreateHostFromXaml function of IXRApplication accepts a structure named XRWindowCreateParams that control how the “plain old” GWES Window is created by the runtime. This structure is initialized inside the InitWindowParm method: // Initializes Windows parameters, can be overridden in the user class to change its appearance virtual void InitWindowParms(XRWindowCreateParams* wp) { wp->Style = WS_OVERLAPPED; wp->pTitle = windowtitle; wp->Left = 0; wp->Top = 0; } This method set up the window style, title and position. But the XRWindowCreateParams contains also other fields and, since the function is declared as virtual, we could initialize them inside our version of InitWindowParms: // add hook procedure to the standard windows creation parms virtual void InitWindowParms(XRWindowCreateParams* wp) { TClock<Clock>::InitWindowParms(wp);   wp->pHookProc=StaticHostHookProc; wp->pvUserParam=this; } This method calls the base class implementation (useful to not having to re-write some code, did I told you that I’m quite lazy?) and then initializes the pHookProc and pvUserParam members of the XRWindowsCreateParams structure. Those members will allow us to install a “hook” procedure that will be called each time the GWES window “hosting” our Silverlight for Windows Embedded UI receives a message. We can declare a hook procedure inside our Clock class: // static hook procedure static BOOL CALLBACK StaticHostHookProc(VOID* pv,HWND hwnd,UINT Msg,WPARAM wParam,LPARAM lParam,LRESULT* pRetVal) { ... } You should notice two things here. First that the function is declared as static. This is required because a non-static function has a “hidden” parameters, that is the “this” pointer of our object. Having an extra parameter is not allowed for the type defined for the pHookProc member of the XRWindowsCreateParams struct and so we should implement our hook procedure as static. But in a static procedure we will not have a this pointer. How could we access the data member of our class? Here’s the second thing to notice. We initialized also the pvUserParam of the XRWindowsCreateParams struct. We set it to our this pointer. This value will be passed as the first parameter of the hook procedure. In this way we can retrieve our this pointer and use it to call a non-static version of our hook procedure: // static hook procedure static BOOL CALLBACK StaticHostHookProc(VOID* pv,HWND hwnd,UINT Msg,WPARAM wParam,LPARAM lParam,LRESULT* pRetVal) { return ((Clock*)pv)->HostHookProc(hwnd,Msg,wParam,lParam,pRetVal); } Inside our non-static hook procedure we will have access to our this pointer and we will be able to update our clock: // hook procedure (handles timers) BOOL HostHookProc(HWND hwnd,UINT Msg,WPARAM wParam,LPARAM lParam,LRESULT* pRetVal) { switch (Msg) { case WM_TIMER: if (wParam==IDT_CLOCKUPDATE) UpdateClock(); *pRetVal=0; return TRUE; } return FALSE; } The UpdateClock member function will update the text inside our TextBlocks and rotate the hands to reflect current time: // udates Hands positions and labels HRESULT UpdateClock() { SYSTEMTIME time; HRESULT retcode;   GetLocalTime(&time);   //updates the text fields TCHAR timebuffer[32];   _itow(time.wSecond,timebuffer,10);   SecondsText->SetText(timebuffer);   _itow(time.wMinute,timebuffer,10);   MinutesText->SetText(timebuffer);   _itow(time.wHour,timebuffer,10);   HoursText->SetText(timebuffer);   if (FAILED(retcode=RotateHand(((float)time.wSecond)*6-90,SecondsHand))) return retcode;   if (FAILED(retcode=RotateHand(((float)time.wMinute)*6-90,MinutesHand))) return retcode;   if (FAILED(retcode=RotateHand(((float)(time.wHour%12))*30-90,HoursHand))) return retcode;   return S_OK; } The function retrieves current time, convert hours, minutes and seconds to strings and display those strings inside the three TextBlocks that we put inside our clock hands. Then it rotates the hands to position them at the right angle (angles are in degrees and we have to subtract 90 degrees because 0 degrees means horizontal on Silverlight for Windows Embedded and usually a clock 0 is in the top position of the dial. The code of the RotateHand function uses transforms to rotate our clock hands on the screen: // rotates a Hand HRESULT RotateHand(float angle,IXRFrameworkElement* Hand) { HRESULT retcode; IXRRotateTransformPtr rotatetransform; IXRApplicationPtr app;   if (FAILED(retcode=GetXRApplicationInstance(&app))) return retcode;   if (FAILED(retcode=app->CreateObject(IID_IXRRotateTransform,&rotatetransform))) return retcode;     if (FAILED(retcode=rotatetransform->SetAngle(angle))) return retcode;   if (FAILED(retcode=rotatetransform->SetCenterX(0.0))) return retcode;   float height;   if (FAILED(retcode==Hand->GetActualHeight(&height))) return retcode;   if (FAILED(retcode=rotatetransform->SetCenterY(height/2))) return retcode; if (FAILED(retcode=Hand->SetRenderTransform(rotatetransform))) return retcode;   return S_OK; } It creates a IXRotateTransform object, set its rotation angle and origin (the default origin is at the top-left corner of our Grid panel, we move it in the vertical center to keep the hand rotating around a single point in a more “clock like” way. Then we can apply the transform to our UI object using SetRenderTransform. Every UI element (derived from IXRFrameworkElement) can be rotated! And using different subclasses of IXRTransform also moved, scaled, skewed and distorted in many ways. You can also concatenate multiple transforms and apply them at once suing a IXRTransformGroup object. The XAML engine uses vector graphics and object will not look “pixelated” when they are rotated or scaled. As usual you can download the code here: http://cid-9b7b0aefe3514dc5.skydrive.live.com/self.aspx/.Public/Clock.zip If you read up to (down to?) this point you seem to be interested in Silverlight for Windows Embedded. If you want me to discuss some specific topic, please feel free to point it out in the comments! Technorati Tags: Silverlight for Windows Embedded,Windows CE

  Read the article

• Heaps of Trouble?

  - by Paul White NZ

  If you’re not already a regular reader of Brad Schulz’s blog, you’re missing out on some great material.  In his latest entry, he is tasked with optimizing a query run against tables that have no indexes at all.  The problem is, predictably, that performance is not very good.  The catch is that we are not allowed to create any indexes (or even new statistics) as part of our optimization efforts. In this post, I’m going to look at the problem from a slightly different angle, and present an alternative solution to the one Brad found.  Inevitably, there’s going to be some overlap between our entries, and while you don’t necessarily need to read Brad’s post before this one, I do strongly recommend that you read it at some stage; he covers some important points that I won’t cover again here. The Example We’ll use data from the AdventureWorks database, copied to temporary unindexed tables.  A script to create these structures is shown below: CREATE TABLE #Custs ( CustomerID INTEGER NOT NULL, TerritoryID INTEGER NULL, CustomerType NCHAR(1) COLLATE SQL_Latin1_General_CP1_CI_AI NOT NULL, ); GO CREATE TABLE #Prods ( ProductMainID INTEGER NOT NULL, ProductSubID INTEGER NOT NULL, ProductSubSubID INTEGER NOT NULL, Name NVARCHAR(50) COLLATE SQL_Latin1_General_CP1_CI_AI NOT NULL, ); GO CREATE TABLE #OrdHeader ( SalesOrderID INTEGER NOT NULL, OrderDate DATETIME NOT NULL, SalesOrderNumber NVARCHAR(25) COLLATE SQL_Latin1_General_CP1_CI_AI NOT NULL, CustomerID INTEGER NOT NULL, ); GO CREATE TABLE #OrdDetail ( SalesOrderID INTEGER NOT NULL, OrderQty SMALLINT NOT NULL, LineTotal NUMERIC(38,6) NOT NULL, ProductMainID INTEGER NOT NULL, ProductSubID INTEGER NOT NULL, ProductSubSubID INTEGER NOT NULL, ); GO INSERT #Custs ( CustomerID, TerritoryID, CustomerType ) SELECT C.CustomerID, C.TerritoryID, C.CustomerType FROM AdventureWorks.Sales.Customer C WITH (TABLOCK); GO INSERT #Prods ( ProductMainID, ProductSubID, ProductSubSubID, Name ) SELECT P.ProductID, P.ProductID, P.ProductID, P.Name FROM AdventureWorks.Production.Product P WITH (TABLOCK); GO INSERT #OrdHeader ( SalesOrderID, OrderDate, SalesOrderNumber, CustomerID ) SELECT H.SalesOrderID, H.OrderDate, H.SalesOrderNumber, H.CustomerID FROM AdventureWorks.Sales.SalesOrderHeader H WITH (TABLOCK); GO INSERT #OrdDetail ( SalesOrderID, OrderQty, LineTotal, ProductMainID, ProductSubID, ProductSubSubID ) SELECT D.SalesOrderID, D.OrderQty, D.LineTotal, D.ProductID, D.ProductID, D.ProductID FROM AdventureWorks.Sales.SalesOrderDetail D WITH (TABLOCK); The query itself is a simple join of the four tables: SELECT P.ProductMainID AS PID, P.Name, D.OrderQty, H.SalesOrderNumber, H.OrderDate, C.TerritoryID FROM #Prods P JOIN #OrdDetail D ON P.ProductMainID = D.ProductMainID AND P.ProductSubID = D.ProductSubID AND P.ProductSubSubID = D.ProductSubSubID JOIN #OrdHeader H ON D.SalesOrderID = H.SalesOrderID JOIN #Custs C ON H.CustomerID = C.CustomerID ORDER BY P.ProductMainID ASC OPTION (RECOMPILE, MAXDOP 1); Remember that these tables have no indexes at all, and only the single-column sampled statistics SQL Server automatically creates (assuming default settings).  The estimated query plan produced for the test query looks like this (click to enlarge): The Problem The problem here is one of cardinality estimation – the number of rows SQL Server expects to find at each step of the plan.  The lack of indexes and useful statistical information means that SQL Server does not have the information it needs to make a good estimate.  Every join in the plan shown above estimates that it will produce just a single row as output.  Brad covers the factors that lead to the low estimates in his post. In reality, the join between the #Prods and #OrdDetail tables will produce 121,317 rows.  It should not surprise you that this has rather dire consequences for the remainder of the query plan.  In particular, it makes a nonsense of the optimizer’s decision to use Nested Loops to join to the two remaining tables.  Instead of scanning the #OrdHeader and #Custs tables once (as it expected), it has to perform 121,317 full scans of each.  The query takes somewhere in the region of twenty minutes to run to completion on my development machine. A Solution At this point, you may be thinking the same thing I was: if we really are stuck with no indexes, the best we can do is to use hash joins everywhere. We can force the exclusive use of hash joins in several ways, the two most common being join and query hints.  A join hint means writing the query using the INNER HASH JOIN syntax; using a query hint involves adding OPTION (HASH JOIN) at the bottom of the query.  The difference is that using join hints also forces the order of the join, whereas the query hint gives the optimizer freedom to reorder the joins at its discretion. Adding the OPTION (HASH JOIN) hint results in this estimated plan: That produces the correct output in around seven seconds, which is quite an improvement!  As a purely practical matter, and given the rigid rules of the environment we find ourselves in, we might leave things there.  (We can improve the hashing solution a bit – I’ll come back to that later on). Faster Nested Loops It might surprise you to hear that we can beat the performance of the hash join solution shown above using nested loops joins exclusively, and without breaking the rules we have been set. The key to this part is to realize that a condition like (A = B) can be expressed as (A <= B) AND (A >= B).  Armed with this tremendous new insight, we can rewrite the join predicates like so: SELECT P.ProductMainID AS PID, P.Name, D.OrderQty, H.SalesOrderNumber, H.OrderDate, C.TerritoryID FROM #OrdDetail D JOIN #OrdHeader H ON D.SalesOrderID >= H.SalesOrderID AND D.SalesOrderID <= H.SalesOrderID JOIN #Custs C ON H.CustomerID >= C.CustomerID AND H.CustomerID <= C.CustomerID JOIN #Prods P ON P.ProductMainID >= D.ProductMainID AND P.ProductMainID <= D.ProductMainID AND P.ProductSubID = D.ProductSubID AND P.ProductSubSubID = D.ProductSubSubID ORDER BY D.ProductMainID OPTION (RECOMPILE, LOOP JOIN, MAXDOP 1, FORCE ORDER); I’ve also added LOOP JOIN and FORCE ORDER query hints to ensure that only nested loops joins are used, and that the tables are joined in the order they appear.  The new estimated execution plan is: This new query runs in under 2 seconds. Why Is It Faster? The main reason for the improvement is the appearance of the eager Index Spools, which are also known as index-on-the-fly spools.  If you read my Inside The Optimiser series you might be interested to know that the rule responsible is called JoinToIndexOnTheFly. An eager index spool consumes all rows from the table it sits above, and builds a index suitable for the join to seek on.  Taking the index spool above the #Custs table as an example, it reads all the CustomerID and TerritoryID values with a single scan of the table, and builds an index keyed on CustomerID.  The term ‘eager’ means that the spool consumes all of its input rows when it starts up.  The index is built in a work table in tempdb, has no associated statistics, and only exists until the query finishes executing. The result is that each unindexed table is only scanned once, and just for the columns necessary to build the temporary index.  From that point on, every execution of the inner side of the join is answered by a seek on the temporary index – not the base table. A second optimization is that the sort on ProductMainID (required by the ORDER BY clause) is performed early, on just the rows coming from the #OrdDetail table.  The optimizer has a good estimate for the number of rows it needs to sort at that stage – it is just the cardinality of the table itself.  The accuracy of the estimate there is important because it helps determine the memory grant given to the sort operation.  Nested loops join preserves the order of rows on its outer input, so sorting early is safe.  (Hash joins do not preserve order in this way, of course). The extra lazy spool on the #Prods branch is a further optimization that avoids executing the seek on the temporary index if the value being joined (the ‘outer reference’) hasn’t changed from the last row received on the outer input.  It takes advantage of the fact that rows are still sorted on ProductMainID, so if duplicates exist, they will arrive at the join operator one after the other. The optimizer is quite conservative about introducing index spools into a plan, because creating and dropping a temporary index is a relatively expensive operation.  It’s presence in a plan is often an indication that a useful index is missing. I want to stress that I rewrote the query in this way primarily as an educational exercise – I can’t imagine having to do something so horrible to a production system. Improving the Hash Join I promised I would return to the solution that uses hash joins.  You might be puzzled that SQL Server can create three new indexes (and perform all those nested loops iterations) faster than it can perform three hash joins.  The answer, again, is down to the poor information available to the optimizer.  Let’s look at the hash join plan again: Two of the hash joins have single-row estimates on their build inputs.  SQL Server fixes the amount of memory available for the hash table based on this cardinality estimate, so at run time the hash join very quickly runs out of memory. This results in the join spilling hash buckets to disk, and any rows from the probe input that hash to the spilled buckets also get written to disk.  The join process then continues, and may again run out of memory.  This is a recursive process, which may eventually result in SQL Server resorting to a bailout join algorithm, which is guaranteed to complete eventually, but may be very slow.  The data sizes in the example tables are not large enough to force a hash bailout, but it does result in multiple levels of hash recursion.  You can see this for yourself by tracing the Hash Warning event using the Profiler tool. The final sort in the plan also suffers from a similar problem: it receives very little memory and has to perform multiple sort passes, saving intermediate runs to disk (the Sort Warnings Profiler event can be used to confirm this).  Notice also that because hash joins don’t preserve sort order, the sort cannot be pushed down the plan toward the #OrdDetail table, as in the nested loops plan. Ok, so now we understand the problems, what can we do to fix it?  We can address the hash spilling by forcing a different order for the joins: SELECT P.ProductMainID AS PID, P.Name, D.OrderQty, H.SalesOrderNumber, H.OrderDate, C.TerritoryID FROM #Prods P JOIN #Custs C JOIN #OrdHeader H ON H.CustomerID = C.CustomerID JOIN #OrdDetail D ON D.SalesOrderID = H.SalesOrderID ON P.ProductMainID = D.ProductMainID AND P.ProductSubID = D.ProductSubID AND P.ProductSubSubID = D.ProductSubSubID ORDER BY D.ProductMainID OPTION (MAXDOP 1, HASH JOIN, FORCE ORDER); With this plan, each of the inputs to the hash joins has a good estimate, and no hash recursion occurs.  The final sort still suffers from the one-row estimate problem, and we get a single-pass sort warning as it writes rows to disk.  Even so, the query runs to completion in three or four seconds.  That’s around half the time of the previous hashing solution, but still not as fast as the nested loops trickery. Final Thoughts SQL Server’s optimizer makes cost-based decisions, so it is vital to provide it with accurate information.  We can’t really blame the performance problems highlighted here on anything other than the decision to use completely unindexed tables, and not to allow the creation of additional statistics. I should probably stress that the nested loops solution shown above is not one I would normally contemplate in the real world.  It’s there primarily for its educational and entertainment value.  I might perhaps use it to demonstrate to the sceptical that SQL Server itself is crying out for an index. Be sure to read Brad’s original post for more details.  My grateful thanks to him for granting permission to reuse some of his material. Paul White Email: [email protected] Twitter: @PaulWhiteNZ

  Read the article

• Linux Kernel not upgraded (from Ubuntu 12.04 to 12.10) - can't remove old kernels and can't install new apps

  - by Tony Breyal

  Question: How do I remove old kernel images which refuse to be removed? Context: Yesterday I upgraded Ubuntu from 12.04 to 12.10. However, the linux kernel has not upgraded from 3.2 to 3.5 as I would have expected. $ uname -r 3.2.0-32-generic $ uname -a Linux tony-b 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ cat /proc/version Linux version 3.2.0-32-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 Not sure why that happened there. I wanted to install Audacity (v2.0.1-1_amd64) to edit a lecture audio file. When trying this operation through Ubuntu Software Center, it says that to install audacity, four items will need to be removed: linux-image-3.2.0-27-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic So I click "Install Anyway" but it fails with the following output: installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 259675 files and directories currently installed.) Removing linux-image-3.2.0-27-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-27-generic /boot/vmlinuz-3.2.0-27-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-27-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-27-generic /boot/vmlinuz-3.2.0-27-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-27-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-27-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.2.0-29-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-29-generic /boot/vmlinuz-3.2.0-29-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-29-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-29-generic /boot/vmlinuz-3.2.0-29-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-29-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-29-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.2.0-30-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-30-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-30-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-30-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.2.0-31-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-31-generic /boot/vmlinuz-3.2.0-31-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-31-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-31-generic /boot/vmlinuz-3.2.0-31-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-31-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-31-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-27-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic Error in function: Setting up grub-pc (2.00-7ubuntu11) ... /usr/sbin/grub-bios-setup: warning: Sector 32 is already in use by the program `FlexNet'; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track. Installation finished. No error reported. Generating grub.cfg ... dpkg: error processing grub-pc (--configure): subprocess installed post-installation script returned error exit status 1 It seems I need to remove the old linux images somehow. I have tried this through (1) Synaptic, (2) Ubuntu Tweak, and (3) Computer Janitor. The first two fail, whilst Computer Janitor won't even open. The output from Synaptic is: E: linux-image-3.2.0-27-generic: subprocess installed post-removal script returned error exit status 1 E: linux-image-3.2.0-29-generic: subprocess installed post-removal script returned error exit status 1 E: linux-image-3.2.0-30-generic: subprocess installed post-removal script returned error exit status 1 E: linux-image-3.2.0-31-generic: subprocess installed post-removal script returned error exit status 1 How do I remove these old images? Thank you kindly in advance for any help on this matter. P.S. Further information: $ dpkg --list | grep linux-image rH linux-image-3.2.0-27-generic 3.2.0-27.43 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP rH linux-image-3.2.0-29-generic 3.2.0-29.46 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP rH linux-image-3.2.0-30-generic 3.2.0-30.48 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP rH linux-image-3.2.0-31-generic 3.2.0-31.50 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-32-generic 3.2.0-32.51 amd64 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.5.0-17-generic 3.5.0-17.28 amd64 Linux kernel image for version 3.5.0 on 64 bit x86 SMP ii linux-image-extra-3.5.0-17-generic 3.5.0-17.28 amd64 Linux kernel image for version 3.5.0 on 64 bit x86 SMP ii linux-image-generic 3.5.0.17.19 amd64 Generic Linux kernel image But trying to remove using the command line fails too e.g.: $ sudo apt-get purge linux-image-3.2.0-27-generic Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED linux-image-3.2.0-27-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic 0 upgraded, 0 newly installed, 4 to remove and 1 not upgraded. 5 not fully installed or removed. After this operation, 597 MB disk space will be freed. Do you want to continue [Y/n]? Y (Reading database ... 259675 files and directories currently installed.) Removing linux-image-3.2.0-27-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-27-generic /boot/vmlinuz-3.2.0-27-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-27-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-27-generic /boot/vmlinuz-3.2.0-27-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-27-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-27-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports has already been reached Removing linux-image-3.2.0-29-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-29-generic /boot/vmlinuz-3.2.0-29-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-29-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-29-generic /boot/vmlinuz-3.2.0-29-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-29-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-29-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports has already been reached Removing linux-image-3.2.0-30-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-30-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-30-generic /boot/vmlinuz-3.2.0-30-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-30-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-30-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports has already been reached Removing linux-image-3.2.0-31-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.2.0-31-generic /boot/vmlinuz-3.2.0-31-generic update-initramfs: Deleting /boot/initrd.img-3.2.0-31-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.2.0-31-generic /boot/vmlinuz-3.2.0-31-generic Generating grub.cfg ... run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 1 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.2.0-31-generic.postrm line 328. dpkg: error processing linux-image-3.2.0-31-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports has already been reached Errors were encountered while processing: linux-image-3.2.0-27-generic linux-image-3.2.0-29-generic linux-image-3.2.0-30-generic linux-image-3.2.0-31-generic E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Messing with the Team

  - by Robert May

  Good Product Owners will help the team be the best that they can be.  Bad product owners will mess with the team and won’t care about the team.  If you’re a product owner, seek to do good and avoid bad behavior at all costs.  Remember, this is for YOUR benefit and you have much power given to you.  Use that power wisely. Scope Creep The product owner has several tools at his disposal to inject scope into an iteration.  First, the product owner can use defects to inject scope.  To do this, they’ll tell the team what functionality that they want to see in a feature.  Then, after the feature is developed, the Product Owner will decide that they don’t really like how the functionality behaves.  To change it, rather than creating a new story, they’ll add a defect.  The functionality is correct, as designed, but the Product Owner doesn’t like it.  By creating the defect, the Product Owner destroys the trust that the team has of the product owner.  They may not be able to count the story, because the Product Owner changed the story in the iteration, and the team then ends up looking like they have low velocity for something over which they have no control.  This is bad.  One way to deal with this is to add “Product Owner Time” to the iteration.  This will slow the velocity, but then the ScrumMaster can tell stake holders that this time is strictly in place to deal with bad behavior of the Product Owner. Another mechanism often used to inject Scope is the concept of directed development.  Outside of planning, stand-ups, or any other meeting, the Product Owner will take a developer aside and ask them to complete a task for them.  This is bad!  The team should be allocating all of their time to development.  If the Product Owner asks for a favor, then time that would normally be used for development will be used for a pet project of the Product Owner and the team will not get credit for this work.  Selfish product owners do this, and I typically see people who were “managers” do this behavior.  Authoritarian command and control development environments also see this happen.  The best thing that can happen is for the team member to report the issue to the ScrumMaster and the ScrumMaster to get very aggressive with management and the Product Owner to try and stop the behavior.  This may result in the ScrumMaster being fired, but if the behavior continues, Scrum is doomed.  This problem is especially bad in cases where the team member’s direct supervisor is the Product Owner.  I don’t recommend that the Product Owner or ScrumMaster have a direct report relationship with team members, since team members need the ability to say no.  To work around this issue, team members need to say no.  If that fails, team members need to add extra time to the iteration to deal with the scope creep injection and accept the lower velocity. As discussed above, another mechanism for injecting scope is by changing acceptance tests after the work is complete.  This is similar to adding defects to change scope and is bad.  To get around, add time for Product Owner uncertainty to the iteration and make sure that stakeholders are aware of the need to add this time because of the Product Owner. Refusing to Prioritize Refusing to prioritize causes chaos for the team.  From the team’s perspective, things that are not important will be worked on while things that the team knows are vital will be ignored.  A poor Product Owner will often pick the stories for the iteration on a whim.  This leads to the team working on many different aspects of the product and results in a lower velocity, since each iteration the team must switch context to the new area of development. The team will also experience confusion about priorities.  In one iteration, Feature X was the highest priority and had to be done.  Then, the following iteration, even though parts of Feature X still need to be completed, no stories to address them will be in the iteration.  However, three iterations later, Feature X will again become high priority. This will cause the team to not trust the Product Owner, and eventually, they’ll stop caring about the features they implement.  They won’t know what is important, so to insulate themselves from the ever changing chaos, they’ll become apathetic to all features.  Team members are some of the most creative people in a company.  By losing their engagement, the company is going to have a substandard product because the passion for the product won’t be in the team. Other signs that the Product Owner refuses to prioritize is that no one outside of the product owner will be consulted on priorities.  Additionally, the product, release, and iteration backlogs will be weak or non-existent. Dealing with this issue is not easy.  This really isn’t something the team can fix, short of taking over the role of Product Owner themselves.  An appeal to the stake holders might work, but only if the Product Owner isn’t a “manager” themselves.  The ScrumMaster needs to protect the team and do what they can to either get the Product Owner to prioritize or have the Product Owner replaced. Managing the Team A Product Owner that is also the “boss” of team members is a Scrum team that is waiting to fail.  If your boss tells you to do something, failing to do that something can cause you to be fired.  The team needs the ability to tell the Product Owner NO.  If the product owner introduces scope creep, the team has a responsibility to tell the Product Owner no.  If the Product Owner tries to get the team to commit to more than they can accomplish in an iteration, the team needs the ability to tell the Product Owner no. If the Product Owner is your boss and determines your pay increases, you’re probably not going to ever tell them no, and Scrum will likely fail.  The team can’t do much in this situation. Another aspect of “managing the team” that often happens is the Product Owner tries to tell the team how to develop the stories that are in the iteration.  This is one reason why I recommend that Product Owners are NOT technical people.  That way, the team can come up with the tasks that are needed to accomplish the stories and the Product Owner won’t know better.  If the Product Owner is technical, the ScrumMaster will need to take great care to protect the team from the ScrumMaster changing how the team thinks they need to implement the stories. Product Owners can also try to manage the team by their body language.  If the team says a task is going to take 6 hours to complete, and the Product Owner disagrees, they will use some kind of sour body language to indicate this disagreement.  In weak teams, this may cause the team to revise their estimate down, which will result in them taking longer than estimated and may result in them missing the iteration.  The ScrumMaster will need to make sure that the Product Owner doesn’t send such messages and that the team ignores them and estimates what they REALLY think it will take to complete the tasks.  Forcing the team to deal with such items in the retrospective can be helpful. Absenteeism The team is completely dependent upon the Product Owner to develop features for the customer.  The Product Owner IS the voice of the customer and without them, the team will lack direction.  Being the Product Owner is a full time job!  If the Product Owner cannot dedicate daily time with the team, a different product owner should be found. The Product Owner needs to attend every stand-up, planning meeting, showcase, and retrospective that the team has.  The team also must be able to have instant communication with the product owner.  They must not be required to schedule meetings to speak with their product owner.  The team must be the highest priority task that the Product Owner has. The best way to work around an absent Product Owner is to appoint a new Product Owner in the team.  This person will be responsible for making the decisions that the Product Owner should be making and to act as the liaison to the absent Product Owner.  If the delegate Product Owner doesn’t have authority to make decisions for the team, Scrum will fail.  If the Product Owner is absent, the ScrumMaster should seek to have that Product Owner replaced by someone who has the time and ability to be a real Product Owner. Making it Personal Too often Product Owners will become convinced that their ideas are the ones that matter and that anyone who disagrees is making a personal attack on them.  Remember that Product Owners will inherently be at odds with many people, simply because they have the need to prioritize.  Others will frequently question prioritization because they only see part of the picture that Product Owners face. Product Owners must have a thick skin and think egos.  If they don’t, they tend to make things personal, which causes them to become emotional and causes them to take actions that can destroy the trust that team members have in the Product Owner. If a Product Owner is making things person, the best thing that team members can do is reassure them that its not personal, but be firm about doing what is best for the Company and for the users.  The ScrumMaster should also spend significant time coaching the Product Owner on how to not react emotionally and how to accept criticism without becoming defensive. Conclusion I’m sure there are other ways that a Product Owner can mess with the team, but these are the most common that I’ve seen.  I would encourage all Product Owners to seek to be a good Product Owner.  If you find yourself behaving in any of the bad product owner ways, change your behavior today!  Your team will thank you. Remember, being Product Owner is very difficult!  Product Owner is one of the most difficult roles in Scrum.  However, it can also be one of the most rewarding roles in Scrum, since Product Owners literally see their ideas brought to life on the computer screen.  Product Owners need to be very patient, even in the face of criticism and need to be willing to make tough decisions on priority, but then not become offended when others disagree with those decisions.  Companies should spend the time needed to find the right product owners for their teams.  Doing so will only help the company to write better software. Technorati Tags: Scrum,Product Owner

  Read the article

• Option Trading: Getting the most out of the event session options

  - by extended_events

  You can control different aspects of how an event session behaves by setting the event session options as part of the CREATE EVENT SESSION DDL. The default settings for the event session options are designed to handle most of the common event collection situations so I generally recommend that you just use the defaults. Like everything in the real world though, there are going to be a handful of “special cases” that require something different. This post focuses on identifying the special cases and the correct use of the options to accommodate those cases. There is a reason it’s called Default The default session options specify a total event buffer size of 4 MB with a 30 second latency. Translating this into human terms; this means that our default behavior is that the system will start processing events from the event buffer when we reach about 1.3 MB of events or after 30 seconds, which ever comes first. Aside: What’s up with the 1.3 MB, I thought you said the buffer was 4 MB?The Extended Events engine takes the total buffer size specified by MAX_MEMORY (4MB by default) and divides it into 3 equally sized buffers. This is done so that a session can be publishing events to one buffer while other buffers are being processed. There are always at least three buffers; how to get more than three is covered later. Using this configuration, the Extended Events engine can “keep up” with most event sessions on standard workloads. Why is this? The fact is that most events are small, really small; on the order of a couple hundred bytes. Even when you start considering events that carry dynamically sized data (eg. binary, text, etc.) or adding actions that collect additional data, the total size of the event is still likely to be pretty small. This means that each buffer can likely hold thousands of events before it has to be processed. When the event buffers are finally processed there is an economy of scale achieved since most targets support bulk processing of the events so they are processed at the buffer level rather than the individual event level. When all this is working together it’s more likely that a full buffer will be processed and put back into the ready queue before the remaining buffers (remember, there are at least three) are full. I know what you’re going to say: “My server is exceptional! My workload is so massive it defies categorization!” OK, maybe you weren’t going to say that exactly, but you were probably thinking it. The point is that there are situations that won’t be covered by the Default, but that’s a good place to start and this post assumes you’ve started there so that you have something to look at in order to determine if you do have a special case that needs different settings. So let’s get to the special cases… What event just fired?! How about now?! Now?! If you believe the commercial adage from Heinz Ketchup (Heinz Slow Good Ketchup ad on You Tube), some things are worth the wait. This is not a belief held by most DBAs, particularly DBAs who are looking for an answer to a troubleshooting question fast. If you’re one of these anxious DBAs, or maybe just a Program Manager doing a demo, then 30 seconds might be longer than you’re comfortable waiting. If you find yourself in this situation then consider changing the MAX_DISPATCH_LATENCY option for your event session. This option will force the event buffers to be processed based on your time schedule. This option only makes sense for the asynchronous targets since those are the ones where we allow events to build up in the event buffer – if you’re using one of the synchronous targets this option isn’t relevant. Avoid forgotten events by increasing your memory Have you ever had one of those days where you keep forgetting things? That can happen in Extended Events too; we call it dropped events. In order to optimizes for server performance and help ensure that the Extended Events doesn’t block the server if to drop events that can’t be published to a buffer because the buffer is full. You can determine if events are being dropped from a session by querying the dm_xe_sessions DMV and looking at the dropped_event_count field. Aside: Should you care if you’re dropping events?Maybe not – think about why you’re collecting data in the first place and whether you’re really going to miss a few dropped events. For example, if you’re collecting query duration stats over thousands of executions of a query it won’t make a huge difference to miss a couple executions. Use your best judgment. If you find that your session is dropping events it means that the event buffer is not large enough to handle the volume of events that are being published. There are two ways to address this problem. First, you could collect fewer events – examine you session to see if you are over collecting. Do you need all the actions you’ve specified? Could you apply a predicate to be more specific about when you fire the event? Assuming the session is defined correctly, the next option is to change the MAX_MEMORY option to a larger number. Picking the right event buffer size might take some trial and error, but a good place to start is with the number of dropped events compared to the number you’ve collected. Aside: There are three different behaviors for dropping events that you specify using the EVENT_RETENTION_MODE option. The default is to allow single event loss and you should stick with this setting since it is the best choice for keeping the impact on server performance low.You’ll be tempted to use the setting to not lose any events (NO_EVENT_LOSS) – resist this urge since it can result in blocking on the server. If you’re worried that you’re losing events you should be increasing your event buffer memory as described in this section. Some events are too big to fail A less common reason for dropping an event is when an event is so large that it can’t fit into the event buffer. Even though most events are going to be small, you might find a condition that occasionally generates a very large event. You can determine if your session is dropping large events by looking at the dm_xe_sessions DMV once again, this time check the largest_event_dropped_size. If this value is larger than the size of your event buffer [remember, the size of your event buffer, by default, is max_memory / 3] then you need a large event buffer. To specify a large event buffer you set the MAX_EVENT_SIZE option to a value large enough to fit the largest event dropped based on data from the DMV. When you set this option the Extended Events engine will create two buffers of this size to accommodate these large events. As an added bonus (no extra charge) the large event buffer will also be used to store normal events in the cases where the normal event buffers are all full and waiting to be processed. (Note: This is just a side-effect, not the intended use. If you’re dropping many normal events then you should increase your normal event buffer size.) Partitioning: moving your events to a sub-division Earlier I alluded to the fact that you can configure your event session to use more than the standard three event buffers – this is called partitioning and is controlled by the MEMORY_PARTITION_MODE option. The result of setting this option is fairly easy to explain, but knowing when to use it is a bit more art than science. First the science… You can configure partitioning in three ways: None, Per NUMA Node & Per CPU. This specifies the location where sets of event buffers are created with fairly obvious implication. There are rules we follow for sub-dividing the total memory (specified by MAX_MEMORY) between all the event buffers that are specific to the mode used: None: 3 buffers (fixed)Node: 3 * number_of_nodesCPU: 2.5 * number_of_cpus Here are some examples of what this means for different Node/CPU counts: Configuration None Node CPU 2 CPUs, 1 Node 3 buffers 3 buffers 5 buffers 6 CPUs, 2 Node 3 buffers 6 buffers 15 buffers 40 CPUs, 5 Nodes 3 buffers 15 buffers 100 buffers   Aside: Buffer size on multi-processor computersAs the number of Nodes or CPUs increases, the size of the event buffer gets smaller because the total memory is sub-divided into more pieces. The defaults will hold up to this for a while since each buffer set is holding events only from the Node or CPU that it is associated with, but at some point the buffers will get too small and you’ll either see events being dropped or you’ll get an error when you create your session because you’re below the minimum buffer size. Increase the MAX_MEMORY setting to an appropriate number for the configuration. The most likely reason to start partitioning is going to be related to performance. If you notice that running an event session is impacting the performance of your server beyond a reasonably expected level [Yes, there is a reasonably expected level of work required to collect events.] then partitioning might be an answer. Before you partition you might want to check a few other things: Is your event retention set to NO_EVENT_LOSS and causing blocking? (I told you not to do this.) Consider changing your event loss mode or increasing memory. Are you over collecting and causing more work than necessary? Consider adding predicates to events or removing unnecessary events and actions from your session. Are you writing the file target to the same slow disk that you use for TempDB and your other high activity databases? <kidding> <not really> It’s always worth considering the end to end picture – if you’re writing events to a file you can be impacted by I/O, network; all the usual stuff. Assuming you’ve ruled out the obvious (and not so obvious) issues, there are performance conditions that will be addressed by partitioning. For example, it’s possible to have a successful event session (eg. no dropped events) but still see a performance impact because you have many CPUs all attempting to write to the same free buffer and having to wait in line to finish their work. This is a case where partitioning would relieve the contention between the different CPUs and likely reduce the performance impact cause by the event session. There is no DMV you can check to find these conditions – sorry – that’s where the art comes in. This is  largely a matter of experimentation. On the bright side you probably won’t need to to worry about this level of detail all that often. The performance impact of Extended Events is significantly lower than what you may be used to with SQL Trace. You will likely only care about the impact if you are trying to set up a long running event session that will be part of your everyday workload – sessions used for short term troubleshooting will likely fall into the “reasonably expected impact” category. Hey buddy – I think you forgot something OK, there are two options I didn’t cover: STARTUP_STATE & TRACK_CAUSALITY. If you want your event sessions to start automatically when the server starts, set the STARTUP_STATE option to ON. (Now there is only one option I didn’t cover.) I’m going to leave causality for another post since it’s not really related to session behavior, it’s more about event analysis. - Mike Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Translating with Google Translate without API and C# Code

  - by Rick Strahl

  Some time back I created a data base driven ASP.NET Resource Provider along with some tools that make it easy to edit ASP.NET resources interactively in a Web application. One of the small helper features of the interactive resource admin tool is the ability to do simple translations using both Google Translate and Babelfish. Here's what this looks like in the resource administration form: When a resource is displayed, the user can click a Translate button and it will show the current resource text and then lets you set the source and target languages to translate. The Go button fires the translation for both Google and Babelfish and displays them - pressing use then changes the language of the resource to the target language and sets the resource value to the newly translated value. It's a nice and quick way to get a quick translation going. Ch… Ch… Changes Originally, both implementations basically did some screen scraping of the interactive Web sites and retrieved translated text out of result HTML. Screen scraping is always kind of an iffy proposition as content can be changed easily, but surprisingly that code worked for many years without fail. Recently however, Google at least changed their input pages to use AJAX callbacks and the page updates no longer worked the same way. End result: The Google translate code was broken. Now, Google does have an official API that you can access, but the API is being deprecated and you actually need to have an API key. Since I have public samples that people can download the API key is an issue if I want people to have the samples work out of the box - the only way I could even do this is by sharing my API key (not allowed).   However, after a bit of spelunking and playing around with the public site however I found that Google's interactive translate page actually makes callbacks using plain public access without an API key. By intercepting some of those AJAX calls and calling them directly from code I was able to get translation back up and working with minimal fuss, by parsing out the JSON these AJAX calls return. I don't think this particular Warning: This is hacky code, but after a fair bit of testing I found this to work very well with all sorts of languages and accented and escaped text etc. as long as you stick to small blocks of translated text. I thought I'd share it in case anybody else had been relying on a screen scraping mechanism like I did and needed a non-API based replacement. Here's the code: /// <summary> /// Translates a string into another language using Google's translate API JSON calls. /// <seealso>Class TranslationServices</seealso> /// </summary> /// <param name="Text">Text to translate. Should be a single word or sentence.</param> /// <param name="FromCulture"> /// Two letter culture (en of en-us, fr of fr-ca, de of de-ch) /// </param> /// <param name="ToCulture"> /// Two letter culture (as for FromCulture) /// </param> public string TranslateGoogle(string text, string fromCulture, string toCulture) { fromCulture = fromCulture.ToLower(); toCulture = toCulture.ToLower(); // normalize the culture in case something like en-us was passed // retrieve only en since Google doesn't support sub-locales string[] tokens = fromCulture.Split('-'); if (tokens.Length > 1) fromCulture = tokens[0]; // normalize ToCulture tokens = toCulture.Split('-'); if (tokens.Length > 1) toCulture = tokens[0]; string url = string.Format(@"http://translate.google.com/translate_a/t?client=j&text={0}&hl=en&sl={1}&tl={2}", HttpUtility.UrlEncode(text),fromCulture,toCulture); // Retrieve Translation with HTTP GET call string html = null; try { WebClient web = new WebClient(); // MUST add a known browser user agent or else response encoding doen't return UTF-8 (WTF Google?) web.Headers.Add(HttpRequestHeader.UserAgent, "Mozilla/5.0"); web.Headers.Add(HttpRequestHeader.AcceptCharset, "UTF-8"); // Make sure we have response encoding to UTF-8 web.Encoding = Encoding.UTF8; html = web.DownloadString(url); } catch (Exception ex) { this.ErrorMessage = Westwind.Globalization.Resources.Resources.ConnectionFailed + ": " + ex.GetBaseException().Message; return null; } // Extract out trans":"...[Extracted]...","from the JSON string string result = Regex.Match(html, "trans\":(\".*?\"),\"", RegexOptions.IgnoreCase).Groups[1].Value; if (string.IsNullOrEmpty(result)) { this.ErrorMessage = Westwind.Globalization.Resources.Resources.InvalidSearchResult; return null; } //return WebUtils.DecodeJsString(result); // Result is a JavaScript string so we need to deserialize it properly JavaScriptSerializer ser = new JavaScriptSerializer(); return ser.Deserialize(result, typeof(string)) as string; } To use the code is straightforward enough - simply provide a string to translate and a pair of two letter source and target languages: string result = service.TranslateGoogle("Life is great and one is spoiled when it goes on and on and on", "en", "de"); TestContext.WriteLine(result); How it works The code to translate is fairly straightforward. It basically uses the URL I snagged from the Google Translate Web Page slightly changed to return a JSON result (&client=j) instead of the funky nested PHP style JSON array that the default returns. The JSON result returned looks like this: {"sentences":[{"trans":"Das Leben ist großartig und man wird verwöhnt, wenn es weiter und weiter und weiter geht","orig":"Life is great and one is spoiled when it goes on and on and on","translit":"","src_translit":""}],"src":"en","server_time":24} I use WebClient to make an HTTP GET call to retrieve the JSON data and strip out part of the full JSON response that contains the actual translated text. Since this is a JSON response I need to deserialize the JSON string in case it's encoded (for upper/lower ASCII chars or quotes etc.). Couple of odd things to note in this code: First note that a valid user agent string must be passed (or at least one starting with a common browser identification - I use Mozilla/5.0). Without this Google doesn't encode the result with UTF-8, but instead uses a ISO encoding that .NET can't easily decode. Google seems to ignore the character set header and use the user agent instead which is - odd to say the least. The other is that the code returns a full JSON response. Rather than use the full response and decode it into a custom type that matches Google's result object, I just strip out the translated text. Yeah I know that's hacky but avoids an extra type and firing up the JavaScript deserializer. My internal version uses a small DecodeJsString() method to decode Javascript without the overhead of a full JSON parser. It's obviously not rocket science but as mentioned above what's nice about it is that it works without an Google API key. I can't vouch on how many translates you can do before there are cut offs but in my limited testing running a few stress tests on a Web server under load I didn't run into any problems. Limitations There are some restrictions with this: It only works on single words or single sentences - multiple sentences (delimited by .) are cut off at the ".". There is also a length limitation which appears to happen at around 220 characters or so. While that may not sound  like much for typical word or phrase translations this this is plenty of length. Use with a grain of salt - Google seems to be trying to limit their exposure to usage of the Translate APIs so this code might break in the future, but for now at least it works. FWIW, I also found that Google's translation is not as good as Babelfish, especially for contextual content like sentences. Google is faster, but Babelfish tends to give better translations. This is why in my translation tool I show both Google and Babelfish values retrieved. You can check out the code for this in the West Wind West Wind Web Toolkit's TranslationService.cs file which contains both the Google and Babelfish translation code pieces. Ironically the Babelfish code has been working forever using screen scraping and continues to work just fine today. I think it's a good idea to have multiple translation providers in case one is down or changes its format, hence the dual display in my translation form above. I hope this has been helpful to some of you - I've actually had many small uses for this code in a number of applications and it's sweet to have a simple routine that performs these operations for me easily. Resources Live Localization Sample Localization Resource Provider Administration form that includes options to translate text using Google and Babelfish interactively. TranslationService.cs The full source code in the West Wind West Wind Web Toolkit's Globalization library that contains the translation code. © Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp  HTTP   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• CodePlex Daily Summary for Friday, December 17, 2010

  CodePlex Daily Summary for Friday, December 17, 2010Popular ReleasesVCC: Latest build, v2.1.31217.1: Automatic drop of latest buildBCrypt.Net: BCrypt.Net R4: Fixed a integer overflow at workFactor = 31LiveChat Starter Kit: LCSK v1.0: This is a working version of the LCSK for Visual Studio 2010, ASP.NET MVC 3 (using Razor View Engine). this is still provider based (with 1 provider Sql) and this is still using WebService and Windows Forms operator console. The solution is cleaner, with an installer to create tables etc. Let me know your feedbackOrchard Project: Orchard 0.9: Orchard Release Notes Build: 0.9.253 Published: 12/16/2010 How to Install OrchardTo install the Orchard tech preview using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard-Using-Web-PI.ashx Web PI will detect your hardware environment and install the application. --OR-- Alternatively, to install the release manually, download the Orchard.Web.0.9.253.zip file. The zip contents are pre-built and ready-to-run. Simply extract the contents of the Orch...SharpDropBox Client for .NET: WP7 SharpDropBox Client - 0.1 Technology Preview: I decided to go ahead and release this. It works well for simple browsing folder structure/downloading files (and login works). See samples for an example of how to use it. I am in progress with a couple other methods which aren't currently working.SQL Monitor: SQL Monitor 2.9: 1. automatically set sql for new query if a object is selected(table/sp/function/view)SplendidCRM: SplendidCRM 5.0 Community Edition: SplendidCRM Software has adopted the GNU Affero General Public License Version 3 (AGPLv3) for its Community Edition. This release includes the full set of SQL source code in the Community Edition, something that was previously only available in the Professional and Enterprise Editions. An article on the subject of Commercial Open-Source licensing has been posted at http://www.codeproject.com/KB/architecture/splendid-guide-article6.aspx.DotSpatial: DotSpatial 12-15-2010: This release contains a few minor bug fixes and hopefully the GDAL libraries for the 3.5 x86 build actually built to the correct directory this time.DotNetNuke® Community Edition: 05.06.01 Beta: This is the initial Beta of DotNetNuke 5.6.1. See the DotNetNuke Roadmap a full list of changes in this release.MSBuild Extension Pack: December 2010: Release Blog Post The MSBuild Extension Pack December 2010 release provides a collection of over 380 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GU...Access Control Service Samples and Documentation (Labs): Samples-R3: Contains latest ACS samples (corresponding to R3 release) that show how to integrate ACS with web services, ASP.NET websites (Web Forms and MVC) and on how to interact with the ACS Management Service. The Readmes for these samples are available here.TweetSharp: TweetSharp v2.0.0.0 - Preview 5: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 5 ChangesMaintenance release with user reported fixes Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous ...EnhSim: EnhSim 2.2.2 ALPHA: 2.2.2 ALPHAThis release adds in the changes for 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - The spirit ...Silverlight Contrib: Silverlight Contrib 2010.1.0: 2010.1.0 New FeaturesCompatibility Release for Silverlight 4 and Visual Studio 2010FlickrNet API Library: 3.1.4000: Newest release. Now contains dedicated Windows Phone 7 DLL as well as all previous DLLs. Also contains Windows Help file documentation now as standard.mojoPortal: 2.3.5.8: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2358-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-12-13: Code samples for Visual Studio 2010SuperWebSocket: SuperWebSocket Drop 2: Changes: based on SuperSocket 1.3 supported sub protocol supported SSL/TLS encryption (wss) in Sync socket mode fixed some data communication bugsWii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...New ProjectsaoleFilter: This is a Filter by MagicshuiChocottone: Simple to-do listData Access Engine (DAE): Data Access Engine (DAE) is an open source and free .NET component to access all popular DBMSs such as Microsoft SQL Server, MySQL, Oracle, Microsoft Access, SQLite and databases that connected by ODBC. DAE helps to connect different DBMSs at the same time. DependencyEvaluation: Programmatically sort your objects based on dependencies. Would work as a compiler framework, project planning, data binding, etc.Doc2Text Converter: A converter that can convert document files(like .doc,.ppt,and .pdf) to plain text.Dynamics AX Test Runner for Visual Studio 2010: Invoke Dynamics AX Test cases from within Visual Studio 2010 and retrieve the results.ExtensibleExtensions: Pack of extensions, firstly text utilities like pluralize, capitalize will be included.FluentHttp: .NET fluent api wrapper for creating restful web requests.K:L:O:N:K Updater Service: The K:L:O:N:K Updater Service is a deployment tool which can be used to deploy Microsoft Installer (msi ), zip or other file formats. A directory is setup to be the deployment directory. Put files into this directory and the packages are distributed and installed at clients.Keyki: my code repositoryLED Editor: Simple project for editing a LED sequence ...Maui: SchedulerMcAfee Vulnerability Manager - Delta Report: Processes two .CSV files generated by McAfee Vulnerability Manager to highlight which vulnerabilities were patched or are still outstanding.milkway Project: A java web project under Spring. Galaxy is an enterprise wiki system.Minecraft Save Wizard: Do you like minecraft ? Do you like it so much that you wish there were more worlds ? Well now you can have as many worlds as you desire. Simply move them to and from your saves folder to a backup folder using this software. It couldn't be simpler ;)Minis Manager: A manager for miniature figures to use for rpgs etc.Model2Form: An ASP.NET Control similar to GridView but it auto builds a Web From in run-time by binding a Model. OBD C# Wrapper: OBD C# Wrapper I want to help peaople to get data from an OBD system. The idea is to create a C# class with preconfigured methods for load values and for use them in a GUI. With this class people have to focalized on the GUI design and not on the interface with OBD.Opalis Extension Local Group and User Management: A Opalis Integration pack allowing for management of local computer groups and users.Opalis Integration Pack: VMWare VSphere: An integration Pack for Opalis. Extending Opalis to integrate fully with VMWare. Built using the Vmware Powershell CMDLets wrapped in C#.Opalis Utilities: An integration pack for Opalis. Extending Opalis to provide some addition UtilitiesOrchard Maps: A Maps module for OrchardOur ICProject: IC 2011 projectpatterns & practices: Project Silk: Project Silk provides guidance and sample implementations that describe and illustrate recommended practices for building next generation web applications using web technologies like HTML5, jQuery, CSS3 and IE9. pianduan: ????pob: xna game in developmentpscommand Firefox Extension: A Firefox extension which allows user to invoke PowerShell commands on links.R.NET: R.NET enables .NET Framework to collaborate with R statistical computing. R.NET requires .NET Framework 4 and R.dll. You already have the DLL in the `bin' folder if you installed R environment, and you need no other extra installations. R.NET is developed in C#.Rough Set tool set: Rough Set Tool SetSerial Port Terminal (SPTerm): Serial Port Terminal (SPTerm) is used for basic communication using serial port (com). Sending bytes and ASCII from PC can be done using SPTerm. It is useful for micro controller projects for UART and simple transmission. Hex data can be sent out directly from text box in SPTermSLGame: NullThe Jumping Point: TJP is a 2 player sidescroller based on SFML. TJP is developed in C++ and will be available for both linux and windows.UIT CRM: Ð? án môn h?c Qu?n lý d? án CNTT c?a nhóm. (tru?ng ÐH CNTT - ÐHQG TpHCM)

  Read the article

• CodePlex Daily Summary for Tuesday, February 23, 2010

  CodePlex Daily Summary for Tuesday, February 23, 2010New Projects.NET Beginners: This project is a summary of project for first time developer and .net beginners. the aim is to provide tools and libraries to get startet with dev...A simple ASP.NET Currency / Money TextBox User Control: A ASP.NET TextBox control used with AJAX maskeditextender makes it possible to enter numbers but it's not very intuitive to use. CurrencyTextBox co...Academiki: Academik The project aims to be a university social network with content sharing and intellectual property. Academik makes it easier for students t...Acessando Campos com XPath Expression: Esse é um exemplo de como usar Xpath Expression na orchestration do Biztalk 2006. O Artigo do exemplo esta em www.biztalkbrasil.blogspot.comAg.CommandManager: A command manager implementation for Silverlights. Supports commanding to more or less any event using the ICommand interfaceApunta Notas: Apunta notas is just a note taking program that I created to learn WPF. Now you can write everything you need to remember or tell somebody. Or you...AzureKit: AzureKit provides a more direct approach to Azure's Table Service, which takes more advantage of the NoSQL nature of the storage medium.CRM 4.0 Distribute Workflow Activity: This plugin allows to execute a workflow for each entity that has a 1:N or N:N relationship to a given entity. For example: execute a workflow for...Dbg Shell: Dbg Shell replaces WinDbg for debugging dumps. All standard Dbg commands are supported. You can also write scripts in .Net assemblies to automated ...Egg Timer: Egg Timer is a very simple Windows Form application for setting short time-frame alarms.Enterprise Library Extensions: Extensions for the Microsoft Enterprise Library applications blocks which makes programming applications even easier.Event Calendar 2.0 Data Extractor: Really simple app to recover event calendar 2.0 information from iGoogle settings files and turn them into CSV format info for importing to other c...iTwiit: Silverlight Twitter Clientlibtym: Have your complete movie collection at a glance to manage all your movie files very comfortably!Metabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: The Metabolite Enterprise libraries are a set of C# Class Libraries developed for use with EPiServer 5 R2 SP2+ projects using PageTypeBuilder. They...Metro UX: Metro UXMTI: -Personal Expense Tracker: Personal Expense Tracker helps you track your expenses. I tried to find simple win forms expense tracker but found none interesting, so i made one...rarouš: repository for rarouš.weblog articlesSacDotNetUG: SacDotNetUG is an ASP.NET MVC 2 Web application intended for the Sacramento .NET user group. This project servers 2 main goals: to promote the adop...ShellLight: ShellLight is essentially a graphical shell for Silverlight applications that enables a quick auto-complete launcher for features in your solution.Sina Weibo(Microblog): sina weibo .NET libraries and applications.Terrain Independant Navigating Automaton v2.0: This is where members of the Robot Design Team from Stony Brook University come together and work on our unique TINA. This project is for a self-go...Url Rewrite.Net: Url Rewrite.Net is an open-source SEO project which contains Custom Http Module example and Custom Configrutaion Module.It is developed in C#.NET 2...WebPart and WebService Currency Converter: This is only a sample code how to get data from yahoo finance and how to implementing on Sharepoint WebPart or WebServices. This code it is freely...WPF AutoComplete TextBox Control: A AutoComplete TextBox Control written in WPF, Looks like the system built-in auto-completion(SHAutoComplete).ZWaveAPI: This project is aim to create an open class library on ZWave. It is based on article from digiWave.dk New Releases.NET Beginners: MathLab Visual Studio Project Template: First preview to a mathlab beginners library..NET Beginners: Turtle Visual Studio Project Template: The turtle engine is a very simlpe turtle which runs over a beach and leaves a track.A simple ASP.NET Currency / Money TextBox User Control: CurrencyTextBox Source v1.0: Source code with a test project.A simple ASP.NET Currency / Money TextBox User Control: CurrencyTextBox.dll: The User Control for use in projects.Acessando Campos com XPath Expression: Source Code SampleXPathExpression: O Source code contem o Projeto em Visual Studio 2005.Actipro WPF Controls Contrib: v2009.2 build 515: Minor tweaks and updated to target Actipro WPF Studio 2009.2 (build 515).Analysis Management System: 1.0.0.1 Update: Fix - Issue 4004 Nieuw - Beschikbare klanten kunnen nu bekeken worden via Extra/Aanvragers (Ctrl R)Apunta Notas: Apunta Notas 1.0 Release Candidate: There is the Release Candidate of Apunta Notas.ARSoft.Tools.Net - C# DNS and SPF Library: 1.2.0: Added asynchronous operations for DNS client.CRM 4.0 Distribute Workflow Activity: Beta: Initial release. Complete functionality, limited testing.Dbg Shell: First Public Release: First ReleaseDnDns and PocketDnDns - A .NET DNS Client Resolver Library: DnDns Library Release 2: A DNS protocol library written completely in managed code (C#). Supports common DNS records types like A, CNAME, MX, SRV, and more. Works on Window...Egg Timer: Egg Timer v1.0: Pretty simple application. Set the time directly or use the 5 minute and 1 hour increment/decrement buttons.EnhSim: EnhSim v1.9.7.2 BETA: 1.9.7.2 BETAImportant!: This beta version includes the changes to the Flame shock damage-over-time component which are currently on the PTR. Downlo...EnhSim: EnhSim v1.9.7.3 BETA: Important!: This beta version includes the changes to the Flame shock damage-over-time component which are currently on the PTR. Download 1.9.7.1 f...Esendex SMS SDK and Downloads for Microsoft.NET languages: Esendex .NET SDK v0.4.0: Features Messaging Service: Send a single SMS message and multiple SMS messages. Send a single Voice Message and multiple Voice Messages. Send...Event Calendar 2.0 Data Extractor: V1.0: First ever build of extractorExcelDna: ExcelDna Version 0.22: An important bugfix release that fixes a critical bug in the MultiThreaded marshaling support (under Excel 2007).InfoService: InfoService v1.5 Beta 8: InfoService Beta Release Please note this is a BETA. It should be stable, but i can't gurantee that! So use it on your own risk. Please read Plugi...Krypton Palette Selectors: Release 1.2: Adds the new KryptonPaletteContextMenu and refactors the KryptonPaletteDropButton to use it.kuuy static system: kss_v1.0beta: kuuy static sytem 1.0 beta editionlibtym: libtym: First public release version. Full functionality, tested. Please notify about bugs.mojoPortal: 2.3.3.9: see release notes on mojoPortal.com http://www.mojoportal.com/mojoportal-2339-released.aspx This release makes it easy to use Artisteer html templa...Net Tool: v1.01: User interface has been changedOpen NFSe: Open NFSe 0.1 (Salvador): Open NFSe 0.1 (Salvador)Paint.NET PSD Plugin: 1.0.7: Further substantial improvements in speed of both loading and saving. In particular, loading is about 5x as fast as in version 1.0.6. Saving is ...Project Starlight: 2.0: Release 2.0 final Changes: -Numerous stability fixes -Firefox 3.5 support -Safari 64 bit support (Snow Leopard) Mac and Windows Binaries are avai...RoTwee: RoTwee 5.0.0.1: This version fix for 16620Secure Data: Secure Data 2010.02.22.01: This version has been rewritten and contains many enhancements and I encourage anyone interested to download the source code and work through the Q...TreeSizeNet: TreeSizeNet 0.10.1: - Complete Redesign - Improved Stability - Improved Performance - PieChart for directory contentUrl Rewrite.Net: Beta V0.1 Release: Includes : -Custom Http Module -Custom Configuration Section Module ( in web.config) -Rewriting ModuleVCC: Latest build, v2.1.30222.0: Automatic drop of latest buildWebPart and WebService Currency Converter: CurrencyConverter.zip: CurrencyConverter.zip Have 3 Project on this files: 1. Library Project 2. Load Library Project Using Web Services 3. Load Library Project Using We...WSUS Smart Approve: 1.0.0.2: Fix: 25903ZuneConsole: ZuneConsole: Console GUI for the Zune Customs library, which should make everything work. This is what you should download.ZuneConsole: ZuneConsole How-To Manual: A quick (only 9 pages lol) tutorial on how to add custom artist info to your Zune.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETDotNetNuke® Community EditionImage Resizer Powertoy Clone for WindowsMicrosoft SQL Server Community & SamplesMost Active ProjectsDinnerNow.netRawrBlogEngine.NETNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSharpyInfoServicejQuery Library for SharePoint Web ServicesPHPExcelpatterns & practices – Enterprise LibrarySharePoint Contrib

  Read the article

• Run WordPress & Other Web Apps with Windows Web Platform

  - by Matthew Guay

  Would you like to run WordPress or other web apps on your PC so you can easily test and design websites?  Here we’ll look at how you can get the latest web apps on your computer in only a few quick steps. Many web apps today, such as WordPress, MediaWiki, and more, are open source and can be run for free from any computer with even a simple local web server.  They are often very difficult to install on your computer, since they require a number of dependencies such as PHP and MySQL.  Microsoft has worked to make this easier, releasing the Windows Web Platform Installer.  This lets you install many popular web apps and free tools in Windows with only a few clicks. Here we’re going to look at how to install WordPress and the free Visual Web Developer 2010 Express to edit web code with the Web Platform Installer.  But, if you’d rather install a different web app or tool, feel free to choose those as the installations are generally similar. Getting Started Head over to Microsoft’s Web development site and download the Web Platform Installer (link below).  This will download very quick, as it is just a small loader.  When you run this loader, it will download the Web Platform Installer files.  The Web Platform Installer works on XP, Vista, and Windows 7, as well as the related versions of Windows Server. After a couple moments, the Web Platform Installer will open and load information about the latest web offerings.    Now you can choose what you want to install.  You can quickly select the recommended products for several categories such as Web Server, Database, and more. Alternately, click Customize under the category and select exactly what you want to install.  Note that items already installed on your computer will be grayed out. We wanted to install Visual Web Developer 2010 Express, so select Customize under Tools, and select Visual Web Developer 2010 Express. Or, for more preset choices, select Options on the bottom of the window. You can choose to add Multimedia, Developer, and Enterprise tools to the lists, or add a new preset list from a feed. Choose Specific Web apps to Install We wanted to install WordPress, so instead of choosing a preset, select the Web Applications tab on the left.  Now you can choose from a variety of apps based on category, or you can view them all together in an A to Z, Most Popular, or Highest Rating list. Click the checkbox beside the app you want to install to select it, or click the “i” for more information. Here’s the More Information pane for WordPress.  If you’re ready to install it, click the checkbox. Now you can go back and add more web apps or tools to the install list if you like.  The Web Platform Installer will automatically find and select prerequisite apps such as MySQL, so you won’t need to worry about finding them. Once you’ve selected everything you want to install, click the Install button on the bottom of the window. The Web Platform Installer will now show you everything that’s selected, including components that it automatically selected.  Notice we only chose to install WordPress and Visual Web Developer 2010 Express, but it also has selected MySQL and PHP automatically.  Click I Accept to proceed. Enter an administrator password for MySQL before the setup begins. Now the Web Platform Installer will take over, automatically downloading, installing, and configuring all of your web apps.  It will also activate optional Windows components that may be needed on your computer.  This may take several minutes, depending on the components you selected and your internet speed.   Setting up Your Test Site Once the installation is finished, you’ll be asked to enter some information about your site.  You can simply accept the defaults or enter your own choices, and then click Continue. Now you’ll need to enter some information for your web apps.  When installing WordPress, you’ll need to choose a database and enter administrative usernames and passwords.  You may also be asked to enter extra information for additional security, but for a local-only test site this isn’t necessary.  Click Continue when you’re finished. You’ll need to wait a few more moments as it complete the setup of your web apps.  The good thing is, once it’s finished, they’ll be ready to go with only minimal configuration. And you’re finished!  The installer will let you know everything it installed, and if there were any problems.  In our test, Visual Web Developer 2010 Express failed to install successfully.  Often the problems may be with the download, so click Finish and then reselect the apps that didn’t install and run the installer again. Now you’re ready to run WordPress from your PC.  Click the Launch WordPress link or enter http://localhost:80/wordpress in your browser to get started. You’ll only have a little more setup to do on WordPress to get it running.  Once you’ve opened your WordPress page in your browser, enter a name for your blog and your email address, and click Install WordPress.   After a few seconds, you should see a Success! page with your username and a temporary password.  Copy the password, and then click Log In. Enter admin as the Username and paste the random generated password, and click Log In. WordPress will remind you to change the default password.  Click the Yes, Take me to my profile page link to do this. Enter something easier for you to remember, and click Update Profile. Now you’re ready to enjoy your new WordPress install on Windows.  You can add plugins and themes, and everything else you’d do with a normal WordPress site.  Here’s the dashboard running from localhost. And here’s the default blog running. Setting up Visual Web Developer 2010 Express As mentioned before, Visual Web Developer 2010 Express didn’t install correctly on our first try, but the second time it installed seamlessly.  Once it’s installed, launch it from your start menu as normal.  It may take a few minutes to load on the first run as it is finishing up setup. You may notice that the splash screen displayed while the program is loading says For Evaluation Purposes Only.  This is because you still need to register the program. You have 30 days to register the program, but let’s go ahead and do it to get this step out of the way.  Click Help in the menu bar, and select Register Product. Click Obtain a registration key online in the popup window. You’ll need to sign in with your Windows Live ID, and then fill out a quick form. When you’re done, copy the registration key displayed and paste it into the registration dialog in Visual Web Developer.   Now you’ve got a registered, free web development program with full standards compliance and IntelliSense to help you work smarter and faster.  And it works great with your local web apps, so you can create, tweak, and then deploy, all from your desktop with this simple installer! Install More Apps You can always run the Web Platform Installer again in the future and add more apps if you’d like.  The install adds a link to the Installer in the Start menu; just run it and repeat the steps above with your new selections. Also, from the installer, you can cleanup the setup files downloaded during the installation if you want.  Click the Options link in the bottom of the window, and then scroll down and select Delete installer cache folder. Uninstalling the apps is not as easy, unfortunately.  If you wish to uninstall the Web Platform Installer and everything you installed with it, you’ll need to uninstall each item individually.  One easy way to see what was all installed together is to sort the entries in Uninstall Programs by date.  In our case, we also installed some other applications on the same day, but it’s easier to see what was installed together. Or if you are not a fan of using Programs and Features to uninstall them, try out a program like Revo Uninstaller Pro. Conclusion Whether you’re a full-time web developer or just enjoy testing out the latest web apps, the Web Platform Installer makes it quick and easy to get your computer loaded up with the latest bits.  In fact, it’s easier to install these tools with all their dependencies than it is to install many standard boxed programs. If you’d like to take your web server anywhere you go and not have it confined to your desktop, then check out our article on how to Turn Your Flashdrive into a Portable Webserver. Link Download the Microsoft Web Platform Installer Similar Articles Productive Geek Tips Linux QuickTip: Downloading and Un-tarring in One StepQuick Tip: Set a Future Date for a Post in WordPressHow-To Geek SoftwareAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek Software: WordPress Comment Moderation Notifier TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

  Read the article

• SQL SERVER – Concurrency Basics – Guest Post by Vinod Kumar

  - by pinaldave

  This guest post is by Vinod Kumar. Vinod Kumar has worked with SQL Server extensively since joining the industry over a decade ago. Working on various versions from SQL Server 7.0, Oracle 7.3 and other database technologies – he now works with the Microsoft Technology Center (MTC) as a Technology Architect. Let us read the blog post in Vinod’s own voice. Learning is always fun when it comes to SQL Server and learning the basics again can be more fun. I did write about Transaction Logs and recovery over my blogs and the concept of simplifying the basics is a challenge. In the real world we always see checks and queues for a process – say railway reservation, banks, customer supports etc there is a process of line and queue to facilitate everyone. Shorter the queue higher is the efficiency of system (a.k.a higher is the concurrency). Every database does implement this using checks like locking, blocking mechanisms and they implement the standards in a way to facilitate higher concurrency. In this post, let us talk about the topic of Concurrency and what are the various aspects that one needs to know about concurrency inside SQL Server. Let us learn the concepts as one-liners: Concurrency can be defined as the ability of multiple processes to access or change shared data at the same time. The greater the number of concurrent user processes that can be active without interfering with each other, the greater the concurrency of the database system. Concurrency is reduced when a process that is changing data prevents other processes from reading that data or when a process that is reading data prevents other processes from changing that data. Concurrency is also affected when multiple processes are attempting to change the same data simultaneously. Two approaches to managing concurrent data access: Optimistic Concurrency Model Pessimistic Concurrency Model Concurrency Models Pessimistic Concurrency Default behavior: acquire locks to block access to data that another process is using. Assumes that enough data modification operations are in the system that any given read operation is likely affected by a data modification made by another user (assumes conflicts will occur). Avoids conflicts by acquiring a lock on data being read so no other processes can modify that data. Also acquires locks on data being modified so no other processes can access the data for either reading or modifying. Readers block writer, writers block readers and writers. Optimistic Concurrency Assumes that there are sufficiently few conflicting data modification operations in the system that any single transaction is unlikely to modify data that another transaction is modifying. Default behavior of optimistic concurrency is to use row versioning to allow data readers to see the state of the data before the modification occurs. Older versions of the data are saved so a process reading data can see the data as it was when the process started reading and not affected by any changes being made to that data. Processes modifying the data is unaffected by processes reading the data because the reader is accessing a saved version of the data rows. Readers do not block writers and writers do not block readers, but, writers can and will block writers. Transaction Processing A transaction is the basic unit of work in SQL Server. Transaction consists of SQL commands that read and update the database but the update is not considered final until a COMMIT command is issued (at least for an explicit transaction: marked with a BEGIN TRAN and the end is marked by a COMMIT TRAN or ROLLBACK TRAN). Transactions must exhibit all the ACID properties of a transaction. ACID Properties Transaction processing must guarantee the consistency and recoverability of SQL Server databases. Ensures all transactions are performed as a single unit of work regardless of hardware or system failure. A – Atomicity C – Consistency I – Isolation D- Durability Atomicity: Each transaction is treated as all or nothing – it either commits or aborts. Consistency: ensures that a transaction won’t allow the system to arrive at an incorrect logical state – the data must always be logically correct.  Consistency is honored even in the event of a system failure. Isolation: separates concurrent transactions from the updates of other incomplete transactions. SQL Server accomplishes isolation among transactions by locking data or creating row versions. Durability: After a transaction commits, the durability property ensures that the effects of the transaction persist even if a system failure occurs. If a system failure occurs while a transaction is in progress, the transaction is completely undone, leaving no partial effects on data. Transaction Dependencies In addition to supporting all four ACID properties, a transaction might exhibit few other behaviors (known as dependency problems or consistency problems). Lost Updates: Occur when two processes read the same data and both manipulate the data, changing its value and then both try to update the original data to the new value. The second process might overwrite the first update completely. Dirty Reads: Occurs when a process reads uncommitted data. If one process has changed data but not yet committed the change, another process reading the data will read it in an inconsistent state. Non-repeatable Reads: A read is non-repeatable if a process might get different values when reading the same data in two reads within the same transaction. This can happen when another process changes the data in between the reads that the first process is doing. Phantoms: Occurs when membership in a set changes. It occurs if two SELECT operations using the same predicate in the same transaction return a different number of rows. Isolation Levels SQL Server supports 5 isolation levels that control the behavior of read operations. Read Uncommitted All behaviors except for lost updates are possible. Implemented by allowing the read operations to not take any locks, and because of this, it won’t be blocked by conflicting locks acquired by other processes. The process can read data that another process has modified but not yet committed. When using the read uncommitted isolation level and scanning an entire table, SQL Server can decide to do an allocation order scan (in page-number order) instead of a logical order scan (following page pointers). If another process doing concurrent operations changes data and move rows to a new location in the table, the allocation order scan can end up reading the same row twice. Also can happen if you have read a row before it is updated and then an update moves the row to a higher page number than your scan encounters later. Performing an allocation order scan under Read Uncommitted can cause you to miss a row completely – can happen when a row on a high page number that hasn’t been read yet is updated and moved to a lower page number that has already been read. Read Committed Two varieties of read committed isolation: optimistic and pessimistic (default). Ensures that a read never reads data that another application hasn’t committed. If another transaction is updating data and has exclusive locks on data, your transaction will have to wait for the locks to be released. Your transaction must put share locks on data that are visited, which means that data might be unavailable for others to use. A share lock doesn’t prevent others from reading but prevents them from updating. Read committed (snapshot) ensures that an operation never reads uncommitted data, but not by forcing other processes to wait. SQL Server generates a version of the changed row with its previous committed values. Data being changed is still locked but other processes can see the previous versions of the data as it was before the update operation began. Repeatable Read This is a Pessimistic isolation level. Ensures that if a transaction revisits data or a query is reissued the data doesn’t change. That is, issuing the same query twice within a transaction cannot pickup any changes to data values made by another user’s transaction because no changes can be made by other transactions. However, this does allow phantom rows to appear. Preventing non-repeatable read is a desirable safeguard but cost is that all shared locks in a transaction must be held until the completion of the transaction. Snapshot Snapshot Isolation (SI) is an optimistic isolation level. Allows for processes to read older versions of committed data if the current version is locked. Difference between snapshot and read committed has to do with how old the older versions have to be. It’s possible to have two transactions executing simultaneously that give us a result that is not possible in any serial execution. Serializable This is the strongest of the pessimistic isolation level. Adds to repeatable read isolation level by ensuring that if a query is reissued rows were not added in the interim, i.e, phantoms do not appear. Preventing phantoms is another desirable safeguard, but cost of this extra safeguard is similar to that of repeatable read – all shared locks in a transaction must be held until the transaction completes. In addition serializable isolation level requires that you lock data that has been read but also data that doesn’t exist. Ex: if a SELECT returned no rows, you want it to return no. rows when the query is reissued. This is implemented in SQL Server by a special kind of lock called the key-range lock. Key-range locks require that there be an index on the column that defines the range of values. If there is no index on the column, serializable isolation requires a table lock. Gets its name from the fact that running multiple serializable transactions at the same time is equivalent of running them one at a time. Now that we understand the basics of what concurrency is, the subsequent blog posts will try to bring out the basics around locking, blocking, deadlocks because they are the fundamental blocks that make concurrency possible. Now if you are with me – let us continue learning for SQL Server Locking Basics. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Concurrency

  Read the article

• C#: Adding Functionality to 3rd Party Libraries With Extension Methods

  - by James Michael Hare

  Ever have one of those third party libraries that you love but it's missing that one feature or one piece of syntactical candy that would make it so much more useful?  This, I truly think, is one of the best uses of extension methods.  I began discussing extension methods in my last post (which you find here) where I expounded upon what I thought were some rules of thumb for using extension methods correctly.  As long as you keep in line with those (or similar) rules, they can often be useful for adding that little extra functionality or syntactical simplification for a library that you have little or no control over. Oh sure, you could take an open source project, download the source and add the methods you want, but then every time the library is updated you have to re-add your changes, which can be cumbersome and error prone.  And yes, you could possibly extend a class in a third party library and override features, but that's only if the class is not sealed, static, or constructed via factories. This is the perfect place to use an extension method!  And the best part is, you and your development team don't need to change anything!  Simply add the using for the namespace the extensions are in! So let's consider this example.  I love log4net!  Of all the logging libraries I've played with, it, to me, is one of the most flexible and configurable logging libraries and it performs great.  But this isn't about log4net, well, not directly.  So why would I want to add functionality?  Well, it's missing one thing I really want in the ILog interface: ability to specify logging level at runtime. For example, let's say I declare my ILog instance like so:     using log4net;     public class LoggingTest     {         private static readonly ILog _log = LogManager.GetLogger(typeof(LoggingTest));         ...     }     If you don't know log4net, the details aren't important, just to show that the field _log is the logger I have gotten from log4net. So now that I have that, I can log to it like so:     _log.Debug("This is the lowest level of logging and just for debugging output.");     _log.Info("This is an informational message.  Usual normal operation events.");     _log.Warn("This is a warning, something suspect but not necessarily wrong.");     _log.Error("This is an error, some sort of processing problem has happened.");     _log.Fatal("Fatals usually indicate the program is dying hideously."); And there's many flavors of each of these to log using string formatting, to log exceptions, etc.  But one thing there isn't: the ability to easily choose the logging level at runtime.  Notice, the logging levels above are chosen at compile time.  Of course, you could do some fun stuff with lambdas and wrap it, but that would obscure the simplicity of the interface.  And yes there is a Logger property you can dive down into where you can specify a Level, but the Level properties don't really match the ILog interface exactly and then you have to manually build a LogEvent and... well, it gets messy.  I want something simple and sexy so I can say:     _log.Log(someLevel, "This will be logged at whatever level I choose at runtime!");     Now, some purists out there might say you should always know what level you want to log at, and for the most part I agree with them.  For the most party the ILog interface satisfies 99% of my needs.  In fact, for most application logging yes you do always know the level you will be logging at, but when writing a utility class, you may not always know what level your user wants. I'll tell you, one of my favorite things is to write reusable components.  If I had my druthers I'd write framework libraries and shared components all day!  And being able to easily log at a runtime-chosen level is a big need for me.  After all, if I want my code to really be re-usable, I shouldn't force a user to deal with the logging level I choose. One of my favorite uses for this is in Interceptors -- I'll describe Interceptors in my next post and some of my favorites -- for now just know that an Interceptor wraps a class and allows you to add functionality to an existing method without changing it's signature.  At the risk of over-simplifying, it's a very generic implementation of the Decorator design pattern. So, say for example that you were writing an Interceptor that would time method calls and emit a log message if the method call execution time took beyond a certain threshold of time.  For instance, maybe if your database calls take more than 5,000 ms, you want to log a warning.  Or if a web method call takes over 1,000 ms, you want to log an informational message.  This would be an excellent use of logging at a generic level. So here was my personal wish-list of requirements for my task: Be able to determine if a runtime-specified logging level is enabled. Be able to log generically at a runtime-specified logging level. Have the same look-and-feel of the existing Debug, Info, Warn, Error, and Fatal calls.    Having the ability to also determine if logging for a level is on at runtime is also important so you don't spend time building a potentially expensive logging message if that level is off.  Consider an Interceptor that may log parameters on entrance to the method.  If you choose to log those parameter at DEBUG level and if DEBUG is not on, you don't want to spend the time serializing those parameters. Now, mine may not be the most elegant solution, but it performs really well since the enum I provide all uses contiguous values -- while it's never guaranteed, contiguous switch values usually get compiled into a jump table in IL which is VERY performant - O(1) - but even if it doesn't, it's still so fast you'd never need to worry about it. So first, I need a way to let users pass in logging levels.  Sure, log4net has a Level class, but it's a class with static members and plus it provides way too many options compared to ILog interface itself -- and wouldn't perform as well in my level-check -- so I define an enum like below.     namespace Shared.Logging.Extensions     {         // enum to specify available logging levels.         public enum LoggingLevel         {             Debug,             Informational,             Warning,             Error,             Fatal         }     } Now, once I have this, writing the extension methods I need is trivial.  Once again, I would typically /// comment fully, but I'm eliminating for blogging brevity:     namespace Shared.Logging.Extensions     {         // the extension methods to add functionality to the ILog interface         public static class LogExtensions         {             // Determines if logging is enabled at a given level.             public static bool IsLogEnabled(this ILog logger, LoggingLevel level)             {                 switch (level)                 {                     case LoggingLevel.Debug:                         return logger.IsDebugEnabled;                     case LoggingLevel.Informational:                         return logger.IsInfoEnabled;                     case LoggingLevel.Warning:                         return logger.IsWarnEnabled;                     case LoggingLevel.Error:                         return logger.IsErrorEnabled;                     case LoggingLevel.Fatal:                         return logger.IsFatalEnabled;                 }                                 return false;             }             // Logs a simple message - uses same signature except adds LoggingLevel             public static void Log(this ILog logger, LoggingLevel level, object message)             {                 switch (level)                 {                     case LoggingLevel.Debug:                         logger.Debug(message);                         break;                     case LoggingLevel.Informational:                         logger.Info(message);                         break;                     case LoggingLevel.Warning:                         logger.Warn(message);                         break;                     case LoggingLevel.Error:                         logger.Error(message);                         break;                     case LoggingLevel.Fatal:                         logger.Fatal(message);                         break;                 }             }             // Logs a message and exception to the log at specified level.             public static void Log(this ILog logger, LoggingLevel level, object message, Exception exception)             {                 switch (level)                 {                     case LoggingLevel.Debug:                         logger.Debug(message, exception);                         break;                     case LoggingLevel.Informational:                         logger.Info(message, exception);                         break;                     case LoggingLevel.Warning:                         logger.Warn(message, exception);                         break;                     case LoggingLevel.Error:                         logger.Error(message, exception);                         break;                     case LoggingLevel.Fatal:                         logger.Fatal(message, exception);                         break;                 }             }             // Logs a formatted message to the log at the specified level.              public static void LogFormat(this ILog logger, LoggingLevel level, string format,                                          params object[] args)             {                 switch (level)                 {                     case LoggingLevel.Debug:                         logger.DebugFormat(format, args);                         break;                     case LoggingLevel.Informational:                         logger.InfoFormat(format, args);                         break;                     case LoggingLevel.Warning:                         logger.WarnFormat(format, args);                         break;                     case LoggingLevel.Error:                         logger.ErrorFormat(format, args);                         break;                     case LoggingLevel.Fatal:                         logger.FatalFormat(format, args);                         break;                 }             }         }     } So there it is!  I didn't have to modify the log4net source code, so if a new version comes out, i can just add the new assembly with no changes.  I didn't have to subclass and worry about developers not calling my sub-class instead of the original.  I simply provide the extension methods and it's as if the long lost extension methods were always a part of the ILog interface! Consider a very contrived example using the original interface:     // using the original ILog interface     public class DatabaseUtility     {         private static readonly ILog _log = LogManager.Create(typeof(DatabaseUtility));                 // some theoretical method to time         IDataReader Execute(string statement)         {             var timer = new System.Diagnostics.Stopwatch();                         // do DB magic                                    // this is hard-coded to warn, if want to change at runtime tough luck!             if (timer.ElapsedMilliseconds > 5000 && _log.IsWarnEnabled)             {                 _log.WarnFormat("Statement {0} took too long to execute.", statement);             }             ...         }     }     Now consider this alternate call where the logging level could be perhaps a property of the class          // using the original ILog interface     public class DatabaseUtility     {         private static readonly ILog _log = LogManager.Create(typeof(DatabaseUtility));                 // allow logging level to be specified by user of class instead         public LoggingLevel ThresholdLogLevel { get; set; }                 // some theoretical method to time         IDataReader Execute(string statement)         {             var timer = new System.Diagnostics.Stopwatch();                         // do DB magic                                    // this is hard-coded to warn, if want to change at runtime tough luck!             if (timer.ElapsedMilliseconds > 5000 && _log.IsLogEnabled(ThresholdLogLevel))             {                 _log.LogFormat(ThresholdLogLevel, "Statement {0} took too long to execute.",                     statement);             }             ...         }     } Next time, I'll show one of my favorite uses for these extension methods in an Interceptor.

  Read the article

• CodePlex Daily Summary for Wednesday, March 17, 2010

  CodePlex Daily Summary for Wednesday, March 17, 2010New Projectschaosreader: A simple RSS reader.CRM 4.0 Customization GUID Update: The CRM 4.0 customization GUID update is an open source C# console application that automatically replaces GUID values in your exported workflow cu...DotNetNuke® Skin Bright: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Noel Jerke of SiteToolset. This simple and clean business...DotNetNuke® Skin Go: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by DnnGo Corporation. The skin uses web standard DIV+CSS tec...DotNetNuke® Skin J10blend: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Timthy Maler of 2M Studio Design. J10-Black v01.00.00 inc...DotNetNuke® Skin Recipe: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by dnnprofis.at. For mobile devices the skin changes to a mobile...DotNetNuke® Skin SpaceSmurfs: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Eric Johnson of Personify Design. This fun personal skin was ins...ERDOS6 - Web: A Web Project about ERDOS 6Flickrlight: Flickrlight is a personal fun project out of love of Flickr and Silverlight. You can experience it here: http://www.flickrlight.net.GsGrid: Extracting data from Gaussian grid file and grid file calculationiLocator: iLocator is a collaborative educational mapping game for children developed on Microsoft Surface. This game encourages players to collaborate with ...Javascript CallObject SOAP AJAX Helper: CallObject is a Javascript based AJAX helper, it facilitates wrapping of basic soap calls (as long as simple data types are used), asynchronous ret...kbTrainer: kbTrainer is a simple to use HTML application for typing speed training. A lot of features completed in basic. 2 learning keywords layouts -- engli...Laboratório de Engenharia de Software - Projeto: Criado para estudar e aplicar novas tecnologias web.Maxilds Powershell Scripts: Repo of my powershell scriptsNamespacifier: Namespacifier is a C#.NET library and console application to fix XML documents containing multiple default namespaces. It gives prefixes to defaul...OData SDK for Objective-C: This is a CTP of the OData SDK for Objective-C. The library targets iPhone devices and Mac OS X and it is designed to facilitate the connection wit...Open Data App Framework (ODAF): The Open Data Application Framework (ODAF) is a framework that allows cities to easily map existing civic Open Data landmarks, and allow users to r...QuickieB2B: QuickieB2B is web application which main target is to provide quick info about products. It's designed for small companies who have a big number of...RayView: Rayview is an easy-to-use Raytracing-Framework based on Microsoft XNA.Robotics Studio application to navigate Lego Mindstorms robot through labyrinth: A project for Software Systems Analysis and Design Tools subject at the Kaunas University of Technology. The main point of the project is to code L...SharePoint Icon Integration: SharePoint Icon Integration makes it easier for SharePoint Administrators / Developers to add a icon (pdf) to the SharePoint farm. You will no long...TestVersion: Testing VersionieringTimecard: SoftSource Timecard project.T-shirt Cannon: So the Coding4Fun team had two weeks to build two robots able to drive, aim, and shoot t-shirts with a Windows Phone during a MIX10 Keynote demo of...USTF: This project is a bit secretive right now.Windows Azure Command-line Tools for PHP Developers: The “Windows Azure Command-line tools for PHP” provide a command-line experience to developers who wish to develop, package, and deploy PHP applic...New ReleasesCaramel Engine: CaramelEngine Alpha Build 0.0.0.1a: This is an early alpha release of the Engine and it's functionality. Be sure to have the using CaramelEngine statement. This release is for people...Coot: Preview: Basic preview On the first use you have to click Create New Session and Login. After this you can just click Screen Saver each time. Settings sho...CycleMania Starter Kit EAP - ASP.NET 4.0 Problem - Design - Solution: Cyclemania 0.08.32: The latest alpha release.DeepZoomContainer, Expanded DeepZoom for Silverlight & Windows Phone 7 Series: Release ver. 1.20 for Windows Phone 7 Series: SolutionMerge PathAnimation solution into one MouseWheel elimination PathAnimationWP7 Port DeepZoomContainerProject rebuilt for WP7 support De...Desktop Google Reader: 1.3 (the social release): NewsSharing Liking Mail item Labels / Tags Send to Twitter Read It Later http://readitlaterlist.com/ Instapaper http://www.instapaper.com/ Favicons...DotNetNuke® Blog: 04.00.00 RC 2: PLEASE NOTE: Please do not upgrade previous version of the Beta releases - please start from 03.05.01 This is a RELEASE CANDIDATE, and as such ...DotNetNuke® Community Edition: 05.03.00: New FeaturesTemplated User Profiles - User profile pages are now publicly viewable Photo field in User Profile - Users can upload a photo to thei...DotNetNuke® Skin Bright: Bright Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Noel Jerke of SiteToolset. This simple and clean business...DotNetNuke® Skin Go: Go Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by DnnGo Corporation. The skin uses web standard DIV+CSS tec...DotNetNuke® Skin J10blend: J10 Blend Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Timthy Maler of 2M Studio Design. J10-Black v01.00.00 incl...DotNetNuke® Skin Recipe: Recipe Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by dnnprofis.at. For mobile devices the skin changes to a mobile f...DotNetNuke® Skin SpaceSmurfs: Space Smurfs Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Eric Johnson of Personify Design. This fun personal skin was ins...Dynamo: Dynamo v0.1 Beta: The following is included: Dynamo dlls Antlr dlls Hello world Simple Plugin example Application Dependency injection Singleton Managment ...ExtremeML: ExtremeML v1.0 Beta 1: Timed to accompany the RTM release of the OpenXML SDK v2.0, this is the first Beta release of ExtremeML (it was previously classified as a preview ...Family Tree Analyzer: Version 1.1.1.1: Version 1.1.1.1 Lots of Gedcom parsing fixes it should crash a whole lot less often and tolerate more "interesting" or "quirky" Gedcom entries. Add...Family Tree Analyzer: Version 1.2.0.1: Version 1.2.0.1 Added option to treat residence facts as Census Facts IGI Search now permits default country selection ie: what to use if it doesn...Flickrlight: Flickrlight: Current release is for idea sharing. There are not many design patterns being used. Please bare with the mess. :-) In order to run the applicat...Gherkin editor: Alpha 0.1: Most of the code at this point is the same as the Avalon.Sample from code project, just changed the name, removed extra languages and added syntax ...GsGrid: gsgrid1.6.4: gsgrid1.6.4GsGrid: gsgrid1.6.4-src: gsgrid1.6.4-srcHTML Template Repeater Module: Version 01.00.02: GeneralThe HTML Template Repeater Module is a direct replacement for the Core DotNetNuke Text/HTML module. Use it where you need to repeat the form...Images Compiler: Release 0.1: Last alpha buildJavascript CallObject SOAP AJAX Helper: Beta Release, 0.2.1: Beta Release, 0.2.1 Contains only core objectskbTrainer: kbtrainer 1.25u: kbTrainer is a simple to use speed typing training HTML application. A lot of features. All ither info availiable on http://code.google.com/p/kbtr...MapWindow6: MapWindow 6.0 msi (March 16): This version fixes a bug where selected points were not drawing correctly.Mesopotamia Experiment: Mesopotamia 1.2.43: Release Notes New Features - Scenario Name on title bar - Show organisms in Scnearios with simple stats Bug Fixes - Removed app domain recyling an...MFCMAPI: March 2010 Release: If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. Build: 6.0.0.1018 The 64 bit bu...MVVM Light Toolkit: MVVM Light Toolkit V3: Download the Zip file and extract it to a local folder. Then, follow the instructions on the Installation page http://www.galasoft.ch/mvvm/installi...NETXPF: 1.0.2: Changes: - Added a class "IOUtils" with methods for reading streams and GZip-compressing HTTP responses - Fixed a bug in the size formatter (excep...OData SDK for Objective-C: OData SDK for Objective-C CTP: The current release supports read-only operations only and it has been tested on a limited set of scenarios. The download include a sample iPhone a...Open Data App Framework (ODAF): ODAF 1.0: Initial beta release.Selection Maker: Selection Maker 1.1: New FeaturesContext Menu for ListView added Bug FixesFixed: If the users press Copy/Cut Button when no item is selected in ListView the ListView cl...Selection Maker: Selection Maker 1.2: Bug Fixes:a minor bug fixedSimple.NET: Simple.Mocking 1.0.0.5: Initial version of a new mocking framework for .NET Revision 1: Expect.AnyInocationOn<T>(T target) changed to Expect.AnyInocationOn(object target...SQL Server Extended Properties Quick Editor: New release 1.5.4: Whats new: Move preferences to application settings and add a form to edit preferences. Support to add, modify and delete operations could be made ...SuperModel - A Dynamic View-Model Generator: 1.0.0.0 - Tyra: The final 1.0 release, now less intrusive! If you don't want to implement ISuperModel, simply implement INotifyPropertyChanged.Timecard: Timecard Initial Release: The zipped version of the Initial Checkin.Transparent Persistence.Net: TP.Net 0.1.0: This is the initial alpha release. It's working for small set of use-cases (basic access to Cassandra).VCC: Latest build, v2.1.30316.0: Automatic drop of latest buildVFPnfe: Projeto Ajuda PAF-ECF: Este projeto visa ajudar aos desenvolvedores para homologação do PAF-ECF , sob licença publica GNU/GPL para ver mais detalhes do mesmo assista o vi...Visual Studio DSite: Gif Animator: This program will make an animate gif. (Program written in Vb.Net 2008)Most Popular ProjectsMetaSharpLiveUpload to FacebookSkype Voice ChangerLiveUpload to YouTubeSIPSorceryChartPart for SharePointTFS Branching Guide 2.0TouchFlo DetacherNPandaySnippet EditorMost Active ProjectsLINQ to TwitterRawrOData SDK for PHPDirectQpatterns & practices – Enterprise LibraryBlogEngine.NETN2 CMSOpen Data App Framework (ODAF)NB_Store - Free DotNetNuke Ecommerce Catalog ModuleMapWindow6

  Read the article

• SQL – NuoDB and Third Party Explorer – SQuirreL SQL Client, SQL Workbench/J and DbVisualizer

  - by Pinal Dave

  I recently wrote a four-part series on how I started to learn about and begin my journey with NuoDB. Big Data is indeed a big world and the learning of the Big Data is like spaghetti – no one knows in reality where to start, so I decided to learn it with the help of NuoDB. You can download NuoDB and continue your journey with me as well. Part 1 – Install NuoDB in 90 Seconds Part 2 – Manage NuoDB Installation Part 3 – Explore NuoDB Database Part 4 – Migrate from SQL Server to NuoDB …and in this blog post we will try to answer the most asked question about NuoDB. “I like the NuoDB Explorer but can I connect to NuoDB from my preferred Graphical User Interface?” Honestly, I did not expect this question to be asked of me so many times but from the question it is clear that we developers absolutely want to learn new things and along with that we do want to continue to use our most efficient developer tools. Now here is the answer to the question: “Absolutely, you can continue to use any of the following most popular SQL clients.” NuoDB supports the three most popular 3rd-party SQL clients. In all the leading development environments there are always more than one database installed and managing each of them with a different tool is often a very difficult task. Developers like to use one tool, which can control most of the databases. Once developers are familiar with one database tool it is very difficult for them to switch to another tool. This is particularly difficult when we developers find that tool to be the key reason for our efficiency. Let us see how to install each of the NuoDB supported 3rd party tools along with a quick tutorial on how to go about using them. SQuirreL SQL Client First download SQuirreL Universal SQL client. On the Windows platform you can double-click on the file and it will install the SQuirrel client. Once it is installed, open the application and it will bring up the following screen. Now go to the Drivers tab on the left side and scroll it down. You will find NuoDB mentioned there. Now right click over it and click on Modify Driver. Now here is where you need to make sure that you make proper entries or your client will not work with the database. Enter following values: Name: NuoDB Example URL: jdbc:com:nuodb://localhost:48004/test Website URL: http://www.nuodb.com Now click on the Extra Class Path tab and Add the location of the nuodbjdbc.jar file. If you are following my blog posts and have installed NuoDB in the default location, you will find the default path as C:\Program Files\NuoDB\jar\nuodbjdbc.jar. The class name of the driver is automatically populated. Once you click OK you will see that there is a small icon displayed to the left of NuoDB, which shows that you have successfully configured and installed the NuoDB driver. Now click on the tab of Alias tab and you can notice that it is empty. Now click on the big Plus icon and it will open screen of adding an alias. “Alias” means nothing more than adding a database to your system. The database name of the original installation can be anything and, if you wish, you can register the database with any other alternative name. Here are the details you should fill into the Alias screen below. Name: Test (or your preferred alias) Driver: NuoDB URL: jdbc:com:nuodb://localhost:48004/test (This is for test database) User Name: dba (This is the username which I entered for test Database) Password: goalie (This is the password which I entered for test Database) Check Auto Logon and Connect at Startup and click on OK. That’s it! You are done. On the right side you will see a table name and on the left side you will see various tabs with all the relevant details from respective table. You can see various metadata, schemas, data types and other information in the table. In addition, you can also generate script and do various important tasks related to database. You can see how easy it is to configure NuoDB with the SQuirreL Client and get going with it immediately. SQL Workbench/J This is another wonderful client tool, which works very well with NuoDB. The best part is that in the Driver dropdown you will see NuoDB being mentioned there. Click here to download  SQL Workbench/J Universal SQL client. The download process is straight forward and the installation is a very easy process for SQL Workbench/J. As soon as you open the client, you will notice on following screen the NuoDB driver when selecting a New Connection Profile. Select NuoDB from the drop down and click on OK. In the driver information, enter following details: Driver: NuoDB (com.nuodb.jdbc.Driver) URL: jdbc:com.nuodb://localhost/test Username: dba Password: goalie While clicking on OK, it will bring up the following pop-up. Click Yes to edit the driver information. Click on OK and it will bring you to following screen. This is the screen where you can perform various tasks. You can write any SQL query you want and it will instantly show you the results. Now click on the database icon, which you see right on the left side of the word User=dba.  Once you click on Database Explorer, you can perform various database related tasks. As a developer, one of my favorite tasks is to look at the source of the table as it gives me a proper view of the structure of the database. I find SQL Workbench/J very efficient in doing the same. DbVisualizer DBVisualizer is another great tool, which helps you to connect to NuoDB and retrieve database information in your desired format. A developer who is familiar with DBVisualizer will find this client to be very easy to work with. The installation of the DBVisualizer is very pretty straight forward. When we open the client, it will bring us to the following screen. As a first step we need to set up the driver. Go to Tools >> Driver Manager. It will bring up following screen where we set up the diver. Click on Create Driver and it will open up the driver settings on the right side. On the right side of the area where it displays Driver Settings please enter the following values- Name: NuoDB URL Format: jdbc:com.nuodb://localhost:48004/test Now under the driver path, click on the folder icon and it will ask for the location of the jar file. Provide the path as a C:\Program Files\NuoDB\jar\nuodbjdbc.jar and click OK. You will notice there is a green button displayed at the bottom right corner. This means the driver is configured properly. Once driver is configured properly, we can go to Create Database Connection and create a database. If the pop up show up for the Wizard. Click on No Wizard and continue to enter the settings manually. Here is the Database Connection screen. This screen can be bit tricky. Here are the settings you need to remember to enter. Name: NuoDB Database Type: Generic Driver: NuoDB Database URL: jdbc:com.nuodb://localhost:48004/test Database Userid: dba Database Password: goalie Once you enter the values, click on Connect. Once Connect is pressed, it will change the button value to Reconnect if the connection is successfully established and it will show the connection details on lthe eft side. When we further explore the NuoDB, we can see various tables created in our test application. We can further click on the right side screen and see various details on the table. If you click on the Data Tab, it will display the entire data of the table. The Tools menu also has some very interesting and cool features like Driver Manager, Data Monitor and SQL History. Summary Well, this was a relatively long post but I find it is extremely essential to cover all the three important clients, which we developers use in our daily database development. Here is my question to you? Which one of the following is your favorite NuoDB 3rd-Party Database Client? (Pick One) SQuirreL SQL Client SQL Workbench/J DbVisualizer I will be very much eager to read your experience about NuoDB. You can download NuoDB from here. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

  Read the article

• Recover Data Like a Forensics Expert Using an Ubuntu Live CD

  - by Trevor Bekolay

  There are lots of utilities to recover deleted files, but what if you can’t boot up your computer, or the whole drive has been formatted? We’ll show you some tools that will dig deep and recover the most elusive deleted files, or even whole hard drive partitions. We’ve shown you simple ways to recover accidentally deleted files, even a simple method that can be done from an Ubuntu Live CD, but for hard disks that have been heavily corrupted, those methods aren’t going to cut it. In this article, we’ll examine four tools that can recover data from the most messed up hard drives, regardless of whether they were formatted for a Windows, Linux, or Mac computer, or even if the partition table is wiped out entirely. Note: These tools cannot recover data that has been overwritten on a hard disk. Whether a deleted file has been overwritten depends on many factors – the quicker you realize that you want to recover a file, the more likely you will be able to do so. Our setup To show these tools, we’ve set up a small 1 GB hard drive, with half of the space partitioned as ext2, a file system used in Linux, and half the space partitioned as FAT32, a file system used in older Windows systems. We stored ten random pictures on each hard drive. We then wiped the partition table from the hard drive by deleting the partitions in GParted. Is our data lost forever? Installing the tools All of the tools we’re going to use are in Ubuntu’s universe repository. To enable the repository, open Synaptic Package Manager by clicking on System in the top-left, then Administration > Synaptic Package Manager. Click on Settings > Repositories and add a check in the box labelled “Community-maintained Open Source software (universe)”. Click Close, and then in the main Synaptic Package Manager window, click the Reload button. Once the package list has reloaded, and the search index rebuilt, search for and mark for installation one or all of the following packages: testdisk, foremost, and scalpel. Testdisk includes TestDisk, which can recover lost partitions and repair boot sectors, and PhotoRec, which can recover many different types of files from tons of different file systems. Foremost, originally developed by the US Air Force Office of Special Investigations, recovers files based on their headers and other internal structures. Foremost operates on hard drives or drive image files generated by various tools. Finally, scalpel performs the same functions as foremost, but is focused on enhanced performance and lower memory usage. Scalpel may run better if you have an older machine with less RAM. Recover hard drive partitions If you can’t mount your hard drive, then its partition table might be corrupted. Before you start trying to recover your important files, it may be possible to recover one or more partitions on your drive, recovering all of your files with one step. Testdisk is the tool for the job. Start it by opening a terminal (Applications > Accessories > Terminal) and typing in: sudo testdisk If you’d like, you can create a log file, though it won’t affect how much data you recover. Once you make your choice, you’re greeted with a list of the storage media on your machine. You should be able to identify the hard drive you want to recover partitions from by its size and label. TestDisk asks you select the type of partition table to search for. In most cases (ext2/3, NTFS, FAT32, etc.) you should select Intel and press Enter. Highlight Analyse and press enter. In our case, our small hard drive has previously been formatted as NTFS. Amazingly, TestDisk finds this partition, though it is unable to recover it. It also finds the two partitions we just deleted. We are able to change their attributes, or add more partitions, but we’ll just recover them by pressing Enter. If TestDisk hasn’t found all of your partitions, you can try doing a deeper search by selecting that option with the left and right arrow keys. We only had these two partitions, so we’ll recover them by selecting Write and pressing Enter. Testdisk informs us that we will have to reboot. Note: If your Ubuntu Live CD is not persistent, then when you reboot you will have to reinstall any tools that you installed earlier. After restarting, both of our partitions are back to their original states, pictures and all. Recover files of certain types For the following examples, we deleted the 10 pictures from both partitions and then reformatted them. PhotoRec Of the three tools we’ll show, PhotoRec is the most user-friendly, despite being a console-based utility. To start recovering files, open a terminal (Applications > Accessories > Terminal) and type in: sudo photorec To begin, you are asked to select a storage device to search. You should be able to identify the right device by its size and label. Select the right device, and then hit Enter. PhotoRec asks you select the type of partition to search. In most cases (ext2/3, NTFS, FAT, etc.) you should select Intel and press Enter. You are given a list of the partitions on your selected hard drive. If you want to recover all of the files on a partition, then select Search and hit enter. However, this process can be very slow, and in our case we only want to search for pictures files, so instead we use the right arrow key to select File Opt and press Enter. PhotoRec can recover many different types of files, and deselecting each one would take a long time. Instead, we press “s” to clear all of the selections, and then find the appropriate file types – jpg, gif, and png – and select them by pressing the right arrow key. Once we’ve selected these three, we press “b” to save these selections. Press enter to return to the list of hard drive partitions. We want to search both of our partitions, so we highlight “No partition” and “Search” and then press Enter. PhotoRec prompts for a location to store the recovered files. If you have a different healthy hard drive, then we recommend storing the recovered files there. Since we’re not recovering very much, we’ll store it on the Ubuntu Live CD’s desktop. Note: Do not recover files to the hard drive you’re recovering from. PhotoRec is able to recover the 20 pictures from the partitions on our hard drive! A quick look in the recup_dir.1 directory that it creates confirms that PhotoRec has recovered all of our pictures, save for the file names. Foremost Foremost is a command-line program with no interactive interface like PhotoRec, but offers a number of command-line options to get as much data out of your had drive as possible. For a full list of options that can be tweaked via the command line, open up a terminal (Applications > Accessories > Terminal) and type in: foremost –h In our case, the command line options that we are going to use are: -t, a comma-separated list of types of files to search for. In our case, this is “jpeg,png,gif”. -v, enabling verbose-mode, giving us more information about what foremost is doing. -o, the output folder to store recovered files in. In our case, we created a directory called “foremost” on the desktop. -i, the input that will be searched for files. This can be a disk image in several different formats; however, we will use a hard disk, /dev/sda. Our foremost invocation is: sudo foremost –t jpeg,png,gif –o foremost –v –i /dev/sda Your invocation will differ depending on what you’re searching for and where you’re searching for it. Foremost is able to recover 17 of the 20 files stored on the hard drive. Looking at the files, we can confirm that these files were recovered relatively well, though we can see some errors in the thumbnail for 00622449.jpg. Part of this may be due to the ext2 filesystem. Foremost recommends using the –d command-line option for Linux file systems like ext2. We’ll run foremost again, adding the –d command-line option to our foremost invocation: sudo foremost –t jpeg,png,gif –d –o foremost –v –i /dev/sda This time, foremost is able to recover all 20 images! A final look at the pictures reveals that the pictures were recovered with no problems. Scalpel Scalpel is another powerful program that, like Foremost, is heavily configurable. Unlike Foremost, Scalpel requires you to edit a configuration file before attempting any data recovery. Any text editor will do, but we’ll use gedit to change the configuration file. In a terminal window (Applications > Accessories > Terminal), type in: sudo gedit /etc/scalpel/scalpel.conf scalpel.conf contains information about a number of different file types. Scroll through this file and uncomment lines that start with a file type that you want to recover (i.e. remove the “#” character at the start of those lines). Save the file and close it. Return to the terminal window. Scalpel also has a ton of command-line options that can help you search quickly and effectively; however, we’ll just define the input device (/dev/sda) and the output folder (a folder called “scalpel” that we created on the desktop). Our invocation is: sudo scalpel /dev/sda –o scalpel Scalpel is able to recover 18 of our 20 files. A quick look at the files scalpel recovered reveals that most of our files were recovered successfully, though there were some problems (e.g. 00000012.jpg). Conclusion In our quick toy example, TestDisk was able to recover two deleted partitions, and PhotoRec and Foremost were able to recover all 20 deleted images. Scalpel recovered most of the files, but it’s very likely that playing with the command-line options for scalpel would have enabled us to recover all 20 images. These tools are lifesavers when something goes wrong with your hard drive. If your data is on the hard drive somewhere, then one of these tools will track it down! Similar Articles Productive Geek Tips Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDUse an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveReset Your Ubuntu Password Easily from the Live CDBackup Your Windows Live Writer SettingsAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

  Read the article

• Understanding LINQ to SQL (11) Performance

  - by Dixin

  [LINQ via C# series] LINQ to SQL has a lot of great features like strong typing query compilation deferred execution declarative paradigm etc., which are very productive. Of course, these cannot be free, and one price is the performance. O/R mapping overhead Because LINQ to SQL is based on O/R mapping, one obvious overhead is, data changing usually requires data retrieving:private static void UpdateProductUnitPrice(int id, decimal unitPrice) { using (NorthwindDataContext database = new NorthwindDataContext()) { Product product = database.Products.Single(item => item.ProductID == id); // SELECT... product.UnitPrice = unitPrice; // UPDATE... database.SubmitChanges(); } } Before updating an entity, that entity has to be retrieved by an extra SELECT query. This is slower than direct data update via ADO.NET:private static void UpdateProductUnitPrice(int id, decimal unitPrice) { using (SqlConnection connection = new SqlConnection( "Data Source=localhost;Initial Catalog=Northwind;Integrated Security=True")) using (SqlCommand command = new SqlCommand( @"UPDATE [dbo].[Products] SET [UnitPrice] = @UnitPrice WHERE [ProductID] = @ProductID", connection)) { command.Parameters.Add("@ProductID", SqlDbType.Int).Value = id; command.Parameters.Add("@UnitPrice", SqlDbType.Money).Value = unitPrice; connection.Open(); command.Transaction = connection.BeginTransaction(); command.ExecuteNonQuery(); // UPDATE... command.Transaction.Commit(); } } The above imperative code specifies the “how to do” details with better performance. For the same reason, some articles from Internet insist that, when updating data via LINQ to SQL, the above declarative code should be replaced by:private static void UpdateProductUnitPrice(int id, decimal unitPrice) { using (NorthwindDataContext database = new NorthwindDataContext()) { database.ExecuteCommand( "UPDATE [dbo].[Products] SET [UnitPrice] = {0} WHERE [ProductID] = {1}", id, unitPrice); } } Or just create a stored procedure:CREATE PROCEDURE [dbo].[UpdateProductUnitPrice] ( @ProductID INT, @UnitPrice MONEY ) AS BEGIN BEGIN TRANSACTION UPDATE [dbo].[Products] SET [UnitPrice] = @UnitPrice WHERE [ProductID] = @ProductID COMMIT TRANSACTION END and map it as a method of NorthwindDataContext (explained in this post):private static void UpdateProductUnitPrice(int id, decimal unitPrice) { using (NorthwindDataContext database = new NorthwindDataContext()) { database.UpdateProductUnitPrice(id, unitPrice); } } As a normal trade off for O/R mapping, a decision has to be made between performance overhead and programming productivity according to the case. In a developer’s perspective, if O/R mapping is chosen, I consistently choose the declarative LINQ code, unless this kind of overhead is unacceptable. Data retrieving overhead After talking about the O/R mapping specific issue. Now look into the LINQ to SQL specific issues, for example, performance in the data retrieving process. The previous post has explained that the SQL translating and executing is complex. Actually, the LINQ to SQL pipeline is similar to the compiler pipeline. It consists of about 15 steps to translate an C# expression tree to SQL statement, which can be categorized as: Convert: Invoke SqlProvider.BuildQuery() to convert the tree of Expression nodes into a tree of SqlNode nodes; Bind: Used visitor pattern to figure out the meanings of names according to the mapping info, like a property for a column, etc.; Flatten: Figure out the hierarchy of the query; Rewrite: for SQL Server 2000, if needed Reduce: Remove the unnecessary information from the tree. Parameterize Format: Generate the SQL statement string; Parameterize: Figure out the parameters, for example, a reference to a local variable should be a parameter in SQL; Materialize: Executes the reader and convert the result back into typed objects. So for each data retrieving, even for data retrieving which looks simple: private static Product[] RetrieveProducts(int productId) { using (NorthwindDataContext database = new NorthwindDataContext()) { return database.Products.Where(product => product.ProductID == productId) .ToArray(); } } LINQ to SQL goes through above steps to translate and execute the query. Fortunately, there is a built-in way to cache the translated query. Compiled query When such a LINQ to SQL query is executed repeatedly, The CompiledQuery can be used to translate query for one time, and execute for multiple times:internal static class CompiledQueries { private static readonly Func<NorthwindDataContext, int, Product[]> _retrieveProducts = CompiledQuery.Compile((NorthwindDataContext database, int productId) => database.Products.Where(product => product.ProductID == productId).ToArray()); internal static Product[] RetrieveProducts( this NorthwindDataContext database, int productId) { return _retrieveProducts(database, productId); } } The new version of RetrieveProducts() gets better performance, because only when _retrieveProducts is first time invoked, it internally invokes SqlProvider.Compile() to translate the query expression. And it also uses lock to make sure translating once in multi-threading scenarios. Static SQL / stored procedures without translating Another way to avoid the translating overhead is to use static SQL or stored procedures, just as the above examples. Because this is a functional programming series, this article not dive into. For the details, Scott Guthrie already has some excellent articles: LINQ to SQL (Part 6: Retrieving Data Using Stored Procedures) LINQ to SQL (Part 7: Updating our Database using Stored Procedures) LINQ to SQL (Part 8: Executing Custom SQL Expressions) Data changing overhead By looking into the data updating process, it also needs a lot of work: Begins transaction Processes the changes (ChangeProcessor) Walks through the objects to identify the changes Determines the order of the changes Executes the changings LINQ queries may be needed to execute the changings, like the first example in this article, an object needs to be retrieved before changed, then the above whole process of data retrieving will be went through If there is user customization, it will be executed, for example, a table’s INSERT / UPDATE / DELETE can be customized in the O/R designer It is important to keep these overhead in mind. Bulk deleting / updating Another thing to be aware is the bulk deleting:private static void DeleteProducts(int categoryId) { using (NorthwindDataContext database = new NorthwindDataContext()) { database.Products.DeleteAllOnSubmit( database.Products.Where(product => product.CategoryID == categoryId)); database.SubmitChanges(); } } The expected SQL should be like:BEGIN TRANSACTION exec sp_executesql N'DELETE FROM [dbo].[Products] AS [t0] WHERE [t0].[CategoryID] = @p0',N'@p0 int',@p0=9 COMMIT TRANSACTION Hoverer, as fore mentioned, the actual SQL is to retrieving the entities, and then delete them one by one:-- Retrieves the entities to be deleted: exec sp_executesql N'SELECT [t0].[ProductID], [t0].[ProductName], [t0].[SupplierID], [t0].[CategoryID], [t0].[QuantityPerUnit], [t0].[UnitPrice], [t0].[UnitsInStock], [t0].[UnitsOnOrder], [t0].[ReorderLevel], [t0].[Discontinued] FROM [dbo].[Products] AS [t0] WHERE [t0].[CategoryID] = @p0',N'@p0 int',@p0=9 -- Deletes the retrieved entities one by one: BEGIN TRANSACTION exec sp_executesql N'DELETE FROM [dbo].[Products] WHERE ([ProductID] = @p0) AND ([ProductName] = @p1) AND ([SupplierID] IS NULL) AND ([CategoryID] = @p2) AND ([QuantityPerUnit] IS NULL) AND ([UnitPrice] = @p3) AND ([UnitsInStock] = @p4) AND ([UnitsOnOrder] = @p5) AND ([ReorderLevel] = @p6) AND (NOT ([Discontinued] = 1))',N'@p0 int,@p1 nvarchar(4000),@p2 int,@p3 money,@p4 smallint,@p5 smallint,@p6 smallint',@p0=78,@p1=N'Optimus Prime',@p2=9,@p3=$0.0000,@p4=0,@p5=0,@p6=0 exec sp_executesql N'DELETE FROM [dbo].[Products] WHERE ([ProductID] = @p0) AND ([ProductName] = @p1) AND ([SupplierID] IS NULL) AND ([CategoryID] = @p2) AND ([QuantityPerUnit] IS NULL) AND ([UnitPrice] = @p3) AND ([UnitsInStock] = @p4) AND ([UnitsOnOrder] = @p5) AND ([ReorderLevel] = @p6) AND (NOT ([Discontinued] = 1))',N'@p0 int,@p1 nvarchar(4000),@p2 int,@p3 money,@p4 smallint,@p5 smallint,@p6 smallint',@p0=79,@p1=N'Bumble Bee',@p2=9,@p3=$0.0000,@p4=0,@p5=0,@p6=0 -- ... COMMIT TRANSACTION And the same to the bulk updating. This is really not effective and need to be aware. Here is already some solutions from the Internet, like this one. The idea is wrap the above SELECT statement into a INNER JOIN:exec sp_executesql N'DELETE [dbo].[Products] FROM [dbo].[Products] AS [j0] INNER JOIN ( SELECT [t0].[ProductID], [t0].[ProductName], [t0].[SupplierID], [t0].[CategoryID], [t0].[QuantityPerUnit], [t0].[UnitPrice], [t0].[UnitsInStock], [t0].[UnitsOnOrder], [t0].[ReorderLevel], [t0].[Discontinued] FROM [dbo].[Products] AS [t0] WHERE [t0].[CategoryID] = @p0) AS [j1] ON ([j0].[ProductID] = [j1].[[Products])', -- The Primary Key N'@p0 int',@p0=9 Query plan overhead The last thing is about the SQL Server query plan. Before .NET 4.0, LINQ to SQL has an issue (not sure if it is a bug). LINQ to SQL internally uses ADO.NET, but it does not set the SqlParameter.Size for a variable-length argument, like argument of NVARCHAR type, etc. So for two queries with the same SQL but different argument length:using (NorthwindDataContext database = new NorthwindDataContext()) { database.Products.Where(product => product.ProductName == "A") .Select(product => product.ProductID).ToArray(); // The same SQL and argument type, different argument length. database.Products.Where(product => product.ProductName == "AA") .Select(product => product.ProductID).ToArray(); } Pay attention to the argument length in the translated SQL:exec sp_executesql N'SELECT [t0].[ProductID] FROM [dbo].[Products] AS [t0] WHERE [t0].[ProductName] = @p0',N'@p0 nvarchar(1)',@p0=N'A' exec sp_executesql N'SELECT [t0].[ProductID] FROM [dbo].[Products] AS [t0] WHERE [t0].[ProductName] = @p0',N'@p0 nvarchar(2)',@p0=N'AA' Here is the overhead: The first query’s query plan cache is not reused by the second one:SELECT sys.syscacheobjects.cacheobjtype, sys.dm_exec_cached_plans.usecounts, sys.syscacheobjects.[sql] FROM sys.syscacheobjects INNER JOIN sys.dm_exec_cached_plans ON sys.syscacheobjects.bucketid = sys.dm_exec_cached_plans.bucketid; They actually use different query plans. Again, pay attention to the argument length in the [sql] column (@p0 nvarchar(2) / @p0 nvarchar(1)). Fortunately, in .NET 4.0 this is fixed:internal static class SqlTypeSystem { private abstract class ProviderBase : TypeSystemProvider { protected int? GetLargestDeclarableSize(SqlType declaredType) { SqlDbType sqlDbType = declaredType.SqlDbType; if (sqlDbType <= SqlDbType.Image) { switch (sqlDbType) { case SqlDbType.Binary: case SqlDbType.Image: return 8000; } return null; } if (sqlDbType == SqlDbType.NVarChar) { return 4000; // Max length for NVARCHAR. } if (sqlDbType != SqlDbType.VarChar) { return null; } return 8000; } } } In this above example, the translated SQL becomes:exec sp_executesql N'SELECT [t0].[ProductID] FROM [dbo].[Products] AS [t0] WHERE [t0].[ProductName] = @p0',N'@p0 nvarchar(4000)',@p0=N'A' exec sp_executesql N'SELECT [t0].[ProductID] FROM [dbo].[Products] AS [t0] WHERE [t0].[ProductName] = @p0',N'@p0 nvarchar(4000)',@p0=N'AA' So that they reuses the same query plan cache: Now the [usecounts] column is 2.

  Read the article

• Option Trading: Getting the most out of the event session options

  - by extended_events

  You can control different aspects of how an event session behaves by setting the event session options as part of the CREATE EVENT SESSION DDL. The default settings for the event session options are designed to handle most of the common event collection situations so I generally recommend that you just use the defaults. Like everything in the real world though, there are going to be a handful of “special cases” that require something different. This post focuses on identifying the special cases and the correct use of the options to accommodate those cases. There is a reason it’s called Default The default session options specify a total event buffer size of 4 MB with a 30 second latency. Translating this into human terms; this means that our default behavior is that the system will start processing events from the event buffer when we reach about 1.3 MB of events or after 30 seconds, which ever comes first. Aside: What’s up with the 1.3 MB, I thought you said the buffer was 4 MB?The Extended Events engine takes the total buffer size specified by MAX_MEMORY (4MB by default) and divides it into 3 equally sized buffers. This is done so that a session can be publishing events to one buffer while other buffers are being processed. There are always at least three buffers; how to get more than three is covered later. Using this configuration, the Extended Events engine can “keep up” with most event sessions on standard workloads. Why is this? The fact is that most events are small, really small; on the order of a couple hundred bytes. Even when you start considering events that carry dynamically sized data (eg. binary, text, etc.) or adding actions that collect additional data, the total size of the event is still likely to be pretty small. This means that each buffer can likely hold thousands of events before it has to be processed. When the event buffers are finally processed there is an economy of scale achieved since most targets support bulk processing of the events so they are processed at the buffer level rather than the individual event level. When all this is working together it’s more likely that a full buffer will be processed and put back into the ready queue before the remaining buffers (remember, there are at least three) are full. I know what you’re going to say: “My server is exceptional! My workload is so massive it defies categorization!” OK, maybe you weren’t going to say that exactly, but you were probably thinking it. The point is that there are situations that won’t be covered by the Default, but that’s a good place to start and this post assumes you’ve started there so that you have something to look at in order to determine if you do have a special case that needs different settings. So let’s get to the special cases… What event just fired?! How about now?! Now?! If you believe the commercial adage from Heinz Ketchup (Heinz Slow Good Ketchup ad on You Tube), some things are worth the wait. This is not a belief held by most DBAs, particularly DBAs who are looking for an answer to a troubleshooting question fast. If you’re one of these anxious DBAs, or maybe just a Program Manager doing a demo, then 30 seconds might be longer than you’re comfortable waiting. If you find yourself in this situation then consider changing the MAX_DISPATCH_LATENCY option for your event session. This option will force the event buffers to be processed based on your time schedule. This option only makes sense for the asynchronous targets since those are the ones where we allow events to build up in the event buffer – if you’re using one of the synchronous targets this option isn’t relevant. Avoid forgotten events by increasing your memory Have you ever had one of those days where you keep forgetting things? That can happen in Extended Events too; we call it dropped events. In order to optimizes for server performance and help ensure that the Extended Events doesn’t block the server if to drop events that can’t be published to a buffer because the buffer is full. You can determine if events are being dropped from a session by querying the dm_xe_sessions DMV and looking at the dropped_event_count field. Aside: Should you care if you’re dropping events?Maybe not – think about why you’re collecting data in the first place and whether you’re really going to miss a few dropped events. For example, if you’re collecting query duration stats over thousands of executions of a query it won’t make a huge difference to miss a couple executions. Use your best judgment. If you find that your session is dropping events it means that the event buffer is not large enough to handle the volume of events that are being published. There are two ways to address this problem. First, you could collect fewer events – examine you session to see if you are over collecting. Do you need all the actions you’ve specified? Could you apply a predicate to be more specific about when you fire the event? Assuming the session is defined correctly, the next option is to change the MAX_MEMORY option to a larger number. Picking the right event buffer size might take some trial and error, but a good place to start is with the number of dropped events compared to the number you’ve collected. Aside: There are three different behaviors for dropping events that you specify using the EVENT_RETENTION_MODE option. The default is to allow single event loss and you should stick with this setting since it is the best choice for keeping the impact on server performance low.You’ll be tempted to use the setting to not lose any events (NO_EVENT_LOSS) – resist this urge since it can result in blocking on the server. If you’re worried that you’re losing events you should be increasing your event buffer memory as described in this section. Some events are too big to fail A less common reason for dropping an event is when an event is so large that it can’t fit into the event buffer. Even though most events are going to be small, you might find a condition that occasionally generates a very large event. You can determine if your session is dropping large events by looking at the dm_xe_sessions DMV once again, this time check the largest_event_dropped_size. If this value is larger than the size of your event buffer [remember, the size of your event buffer, by default, is max_memory / 3] then you need a large event buffer. To specify a large event buffer you set the MAX_EVENT_SIZE option to a value large enough to fit the largest event dropped based on data from the DMV. When you set this option the Extended Events engine will create two buffers of this size to accommodate these large events. As an added bonus (no extra charge) the large event buffer will also be used to store normal events in the cases where the normal event buffers are all full and waiting to be processed. (Note: This is just a side-effect, not the intended use. If you’re dropping many normal events then you should increase your normal event buffer size.) Partitioning: moving your events to a sub-division Earlier I alluded to the fact that you can configure your event session to use more than the standard three event buffers – this is called partitioning and is controlled by the MEMORY_PARTITION_MODE option. The result of setting this option is fairly easy to explain, but knowing when to use it is a bit more art than science. First the science… You can configure partitioning in three ways: None, Per NUMA Node & Per CPU. This specifies the location where sets of event buffers are created with fairly obvious implication. There are rules we follow for sub-dividing the total memory (specified by MAX_MEMORY) between all the event buffers that are specific to the mode used: None: 3 buffers (fixed)Node: 3 * number_of_nodesCPU: 2.5 * number_of_cpus Here are some examples of what this means for different Node/CPU counts: Configuration None Node CPU 2 CPUs, 1 Node 3 buffers 3 buffers 5 buffers 6 CPUs, 2 Node 3 buffers 6 buffers 15 buffers 40 CPUs, 5 Nodes 3 buffers 15 buffers 100 buffers   Aside: Buffer size on multi-processor computersAs the number of Nodes or CPUs increases, the size of the event buffer gets smaller because the total memory is sub-divided into more pieces. The defaults will hold up to this for a while since each buffer set is holding events only from the Node or CPU that it is associated with, but at some point the buffers will get too small and you’ll either see events being dropped or you’ll get an error when you create your session because you’re below the minimum buffer size. Increase the MAX_MEMORY setting to an appropriate number for the configuration. The most likely reason to start partitioning is going to be related to performance. If you notice that running an event session is impacting the performance of your server beyond a reasonably expected level [Yes, there is a reasonably expected level of work required to collect events.] then partitioning might be an answer. Before you partition you might want to check a few other things: Is your event retention set to NO_EVENT_LOSS and causing blocking? (I told you not to do this.) Consider changing your event loss mode or increasing memory. Are you over collecting and causing more work than necessary? Consider adding predicates to events or removing unnecessary events and actions from your session. Are you writing the file target to the same slow disk that you use for TempDB and your other high activity databases? <kidding> <not really> It’s always worth considering the end to end picture – if you’re writing events to a file you can be impacted by I/O, network; all the usual stuff. Assuming you’ve ruled out the obvious (and not so obvious) issues, there are performance conditions that will be addressed by partitioning. For example, it’s possible to have a successful event session (eg. no dropped events) but still see a performance impact because you have many CPUs all attempting to write to the same free buffer and having to wait in line to finish their work. This is a case where partitioning would relieve the contention between the different CPUs and likely reduce the performance impact cause by the event session. There is no DMV you can check to find these conditions – sorry – that’s where the art comes in. This is  largely a matter of experimentation. On the bright side you probably won’t need to to worry about this level of detail all that often. The performance impact of Extended Events is significantly lower than what you may be used to with SQL Trace. You will likely only care about the impact if you are trying to set up a long running event session that will be part of your everyday workload – sessions used for short term troubleshooting will likely fall into the “reasonably expected impact” category. Hey buddy – I think you forgot something OK, there are two options I didn’t cover: STARTUP_STATE & TRACK_CAUSALITY. If you want your event sessions to start automatically when the server starts, set the STARTUP_STATE option to ON. (Now there is only one option I didn’t cover.) I’m going to leave causality for another post since it’s not really related to session behavior, it’s more about event analysis. - Mike Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >